[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 59d282522769 started "build libpciaccess.spec" at Tue Jan 6 04:04:34 UTC 2026. [ 0s] [ 0s] Building libpciaccess for project 'Tizen-Base-Dev' repository 'standard' arch 'armv7l' srcmd5 '7325d11798514e0e18cf29ffc56035ff' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build-srcdir/libpciaccess.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build-srcdir/libpciaccess.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build-srcdir/libpciaccess.spec build ... [ 1s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/44] preinstalling libmagic-data... [ 2s] [2/44] preinstalling libncurses... [ 2s] [3/44] preinstalling setup... [ 2s] [4/44] preinstalling filesystem... [ 2s] [5/44] preinstalling glibc... [ 3s] [6/44] preinstalling libgcc... [ 3s] [7/44] preinstalling bash... [ 3s] [8/44] preinstalling diffutils... [ 3s] [9/44] preinstalling grep... [ 3s] [10/44] preinstalling libattr... [ 3s] [11/44] preinstalling libblkid... [ 3s] [12/44] preinstalling libbz2... [ 3s] [13/44] preinstalling libcap... [ 3s] [14/44] preinstalling libfreebl3... [ 3s] [15/44] preinstalling liblua... [ 3s] [16/44] preinstalling liblzma... [ 3s] [17/44] preinstalling libopenssl3... [ 4s] [18/44] preinstalling libpopt... [ 4s] [19/44] preinstalling libreadline... [ 4s] [20/44] preinstalling libsmack... [ 4s] [21/44] preinstalling libsqlite... [ 4s] [22/44] preinstalling libuuid... [ 4s] [23/44] preinstalling libxcrypt... [ 4s] [24/44] preinstalling libxml2... [ 4s] [25/44] preinstalling libzstd1... [ 4s] [26/44] preinstalling nspr... [ 4s] [27/44] preinstalling sed... [ 4s] [28/44] preinstalling zlib... [ 4s] [29/44] preinstalling clang-accel-x86_64-armv7l... [ 27s] [30/44] preinstalling qemu-accel-x86_64-armv7l... [ 52s] [31/44] preinstalling qemu-linux-user-x86_64-cross... [ 65s] [32/44] preinstalling coreutils... [ 65s] [33/44] preinstalling libacl... [ 65s] [34/44] preinstalling libelf... [ 65s] [35/44] preinstalling libmount... [ 65s] [36/44] preinstalling smack... [ 65s] [37/44] preinstalling bzip2... [ 65s] [38/44] preinstalling libmagic... [ 65s] [39/44] preinstalling tar... [ 65s] [40/44] preinstalling util-linux... [ 66s] [41/44] preinstalling rpm... [ 66s] [42/44] preinstalling util-linux-su... [ 66s] [43/44] preinstalling nss... [ 66s] [44/44] preinstalling libsoftokn3... [ 66s] running qemu-linux-user-x86_64-cross postinstall script [ 67s] running qemu-accel-x86_64-armv7l postinstall script [ 67s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 67s] running clang-accel-x86_64-armv7l postinstall script [ 67s] running setup postinstall script [ 67s] chroot: failed to run command '': No such file or directory [ 67s] initializing rpm db... [ 67s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 67s] breaking dependency libxcrypt-devel -> glibc-devel [ 67s] cycle: libsoftokn3 -> nss [ 67s] breaking dependency nss -> libsoftokn3 [ 67s] done [ 67s] querying package ids... [ 68s] [1/106] cumulate libmagic-data-5.46-1.3 [ 68s] [2/106] cumulate setup-0.9-1.2 [ 68s] [3/106] cumulate filesystem-3.1-1.1 [ 68s] [4/106] cumulate glibc-2.40-1.6 [ 68s] [5/106] cumulate libatomic-14.2.0-1.6 [ 68s] [6/106] cumulate libgcc-14.2.0-1.6 [ 68s] [7/106] cumulate bash-3.2.57-1.1 [ 68s] [8/106] cumulate cpio-2.8-2.1 [ 68s] [9/106] cumulate diffutils-3.10-1.1 [ 68s] [10/106] cumulate findutils-4.3.8-1.3 [ 68s] [11/106] cumulate gdbm-1.8.3-1.6 [ 68s] [12/106] cumulate hostname-3.23-1.1 [ 68s] [13/106] cumulate libattr-2.5.1-1.4 [ 68s] [14/106] cumulate libblkid-2.41.2-1.4 [ 68s] [15/106] cumulate libbz2-1.0.8-1.5 [ 68s] [16/106] cumulate libcap-2.73-1.4 [ 68s] [17/106] cumulate libfreebl3-3.109-1.2 [ 68s] [18/106] cumulate libgfortran-14.2.0-1.6 [ 68s] [19/106] cumulate libgomp-14.2.0-1.6 [ 68s] [20/106] cumulate libitm-14.2.0-1.6 [ 68s] [21/106] cumulate libltdl-2.5.4-1.6 [ 68s] [22/106] cumulate liblua-5.1.5-1.3 [ 68s] [23/106] cumulate liblzma-5.8.1-1.6 [ 68s] [24/106] cumulate libopenssl3-3.0.18-1.3 [ 68s] [25/106] cumulate libpcre-8.45-1.4 [ 68s] [26/106] cumulate libpopt-1.16-1.3 [ 68s] [27/106] cumulate libsmack-1.3.1-1.3 [ 68s] [28/106] cumulate libsmartcols-2.41.2-1.4 [ 68s] [29/106] cumulate libsqlite-3.51.0-1.4 [ 68s] [30/106] cumulate libstdc++-14.2.0-1.6 [ 68s] [31/106] cumulate libuuid-2.41.2-1.4 [ 68s] [32/106] cumulate libxcrypt-4.4.36-1.6 [ 68s] [33/106] cumulate libxml2-2.13.5-1.5 [ 68s] [34/106] cumulate libzstd1-1.5.7-1.5 [ 68s] [35/106] cumulate m4-1.4.20-1.1 [ 68s] [36/106] cumulate net-tools-2.0_20121208git-1.3 [ 68s] [37/106] cumulate nspr-4.36-1.1 [ 68s] [38/106] cumulate patch-2.8-1.3 [ 68s] [39/106] cumulate pkg-config-0.29.2-1.4 [ 68s] [40/106] cumulate sed-4.1c-1.3 [ 68s] [41/106] cumulate update-alternatives-1.22.21-1.1 [ 68s] [42/106] cumulate which-2.17-1.1 [ 68s] [43/106] cumulate zlib-1.3.1-1.6 [ 68s] [44/106] cumulate build-compare-2023.06.18-1.2 [ 68s] [45/106] cumulate clang-accel-x86_64-armv7l-0.4-1.1 [ 68s] [46/106] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 68s] [47/106] cumulate libstdc++-devel-14.2.0-1.6 [ 68s] [48/106] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-2.1 [ 68s] [49/106] cumulate util-macros-1.19.0-1.1 [ 68s] [50/106] cumulate cpp-14.2.0-1.6 [ 68s] [51/106] cumulate gcc-c++-14.2.0-1.6 [ 68s] [52/106] cumulate binutils-libs-2.43-1.6 [ 68s] [53/106] cumulate coreutils-6.9-14.2 [ 68s] [54/106] cumulate gawk-3.1.5-1.1 [ 68s] [55/106] cumulate grep-2.5.2-1.3 [ 68s] [56/106] cumulate libacl-2.3.2-1.4 [ 68s] [57/106] cumulate libcc1-14.2.0-1.6 [ 68s] [58/106] cumulate libelf-0.189-1.6 [ 68s] [59/106] cumulate liblastlog2-2.41.2-1.4 [ 68s] [60/106] cumulate libmount-2.41.2-1.4 [ 68s] [61/106] cumulate make-4.4.1-1.3 [ 68s] [62/106] cumulate nss-certs-3.109-1.2 [ 68s] [63/106] cumulate smack-1.3.1-1.3 [ 68s] [64/106] cumulate bzip2-1.0.8-1.5 [ 68s] [65/106] cumulate libfdisk-2.41.2-1.4 [ 68s] [66/106] cumulate libmagic-5.46-1.3 [ 68s] [67/106] cumulate xz-5.8.1-1.6 [ 68s] [68/106] cumulate libllvm-21.1.1-3.1 [ 68s] [69/106] cumulate perl-5.38.0-1.5 [ 68s] [70/106] cumulate build-mkbaselibs-20120927-1.1 [ 68s] [71/106] cumulate linux-glibc-devel-6.6-1.6 [ 68s] [72/106] cumulate terminfo-base-full-6.4-1.6 [ 68s] [73/106] cumulate autoconf-2.71-1.6 [ 68s] [74/106] cumulate glibc-locale-2.40-1.6 [ 68s] [75/106] cumulate tar-1.17-1.1 [ 68s] [76/106] cumulate binutils-2.43-1.6 [ 68s] [77/106] cumulate file-5.46-1.3 [ 68s] [78/106] cumulate gzip-1.3.12-1.3 [ 68s] [79/106] cumulate pam-1.1.6-1.3 [ 68s] [80/106] cumulate tzdata-2025b-1.1 [ 68s] [81/106] cumulate libdw-0.189-1.6 [ 68s] [82/106] cumulate gcc-14.2.0-1.6 [ 68s] [83/106] cumulate libarchive-3.8.1-1.5 [ 68s] [84/106] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 68s] [85/106] cumulate automake-1.16.5-1.6 [ 68s] [86/106] cumulate libasm-0.189-1.6 [ 68s] [87/106] cumulate libncurses6-6.4-1.6 [ 68s] [88/106] cumulate build-20120927-1.1 [ 68s] [89/106] cumulate rpm-4.14.1.1-1.6 [ 68s] [90/106] cumulate libncurses-6.4-1.6 [ 68s] [91/106] cumulate less-685-1.1 [ 68s] [92/106] cumulate libreadline-5.2-1.5 [ 68s] [93/106] cumulate libtool-2.5.4-1.6 [ 68s] [94/106] cumulate elfutils-0.189-1.6 [ 68s] [95/106] cumulate lldb-21.1.1-3.1 [ 68s] [96/106] cumulate llvm-21.1.1-3.1 [ 68s] [97/106] cumulate util-linux-2.41.2-1.4 [ 68s] [98/106] cumulate util-linux-su-2.41.2-1.4 [ 68s] [99/106] cumulate llvm-devel-21.1.1-3.1 [ 68s] [100/106] cumulate clang-21.1.1-3.1 [ 68s] [101/106] cumulate libxcrypt-devel-4.4.36-1.6 [ 68s] [102/106] cumulate nss-3.109-1.2 [ 68s] [103/106] cumulate glibc-devel-2.40-1.6 [ 68s] [104/106] cumulate libsoftokn3-3.109-1.2 [ 68s] [105/106] cumulate zlib-devel-1.3.1-1.6 [ 68s] [106/106] cumulate rpm-build-4.14.1.1-1.6 [ 68s] now installing cumulated packages [ 179s] Preparing... ######################################## [ 179s] Updating / installing... [ 179s] setup-0.9-1.2 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 179s] ########################## [ 179s] filesystem-3.1-1.1 ######################################## [ 180s] libmagic-data-5.46-1.3 ######################################## [ 180s] glibc-2.40-1.6 ######################################## [ 181s] libgcc-14.2.0-1.6 ######################################## [ 181s] bash-3.2.57-1.1 ######################################## [ 181s] zlib-1.3.1-1.6 ######################################## [ 181s] libstdc++-14.2.0-1.6 ######################################## [ 182s] coreutils-6.9-14.2 ######################################## [ 182s] libelf-0.189-1.6 ######################################## [ 182s] libbz2-1.0.8-1.5 ######################################## [ 183s] liblzma-5.8.1-1.6 ######################################## [ 183s] libxml2-2.13.5-1.5 ######################################## [ 183s] libdw-0.189-1.6 ######################################## [ 183s] libxcrypt-4.4.36-1.6 ######################################## [ 184s] libblkid-2.41.2-1.4 ######################################## [ 184s] nspr-4.36-1.1 ######################################## [ 184s] pkg-config-0.29.2-1.4 ######################################## [ 184s] pam-1.1.6-1.3 ######################################## [ 184s] libmagic-5.46-1.3 ######################################## [ 185s] libfreebl3-3.109-1.2 ######################################## [ 185s] libopenssl3-3.0.18-1.3 ######################################## [ 185s] libpopt-1.16-1.3 ######################################## [ 185s] libsqlite-3.51.0-1.4 ######################################## [ 186s] libuuid-2.41.2-1.4 ######################################## [ 186s] linux-glibc-devel-6.6-1.6 ######################################## [ 186s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 186s] glibc-devel-2.40-1.6 ######################################## [ 187s] terminfo-base-full-6.4-1.6 ######################################## [ 187s] libncurses6-6.4-1.6 ######################################## [ 187s] libreadline-5.2-1.5 ######################################## [ 197s] lldb-21.1.1-3.1 ######################################## [ 197s] libfdisk-2.41.2-1.4 ######################################## [ 198s] liblastlog2-2.41.2-1.4 ######################################## [ 198s] nss-certs-3.109-1.2 ######################################## [ 198s] libsoftokn3-3.109-1.2 ######################################## [ 198s] nss-3.109-1.2 ######################################## [ 198s] libmount-2.41.2-1.4 ######################################## [ 199s] libasm-0.189-1.6 ######################################## [ 207s] libllvm-21.1.1-3.1 ######################################## [ 355s] llvm-21.1.1-3.1 ######################################## [ 357s] xz-5.8.1-1.6 ######################################## [ 357s] bzip2-1.0.8-1.5 ######################################## [ 357s] gzip-1.3.12-1.3 ######################################## [ 357s] libcc1-14.2.0-1.6 ######################################## [ 357s] binutils-libs-2.43-1.6 ######################################## [ 361s] binutils-2.43-1.6 ######################################## [ 361s] make-4.4.1-1.3 ######################################## [ 361s] findutils-4.3.8-1.3 ######################################## [ 361s] gdbm-1.8.3-1.6 ######################################## [ 371s] perl-5.38.0-1.5 ######################################## [ 371s] build-mkbaselibs-20120927-1.1 ######################################## [ 371s] libattr-2.5.1-1.4 ######################################## [ 371s] libacl-2.3.2-1.4 ######################################## [ 371s] tar-1.17-1.1 ######################################## [ 371s] libarchive-3.8.1-1.5 ######################################## [ 372s] libcap-2.73-1.4 ######################################## [ 372s] libgfortran-14.2.0-1.6 ######################################## [ 372s] libgomp-14.2.0-1.6 ######################################## [ 372s] libitm-14.2.0-1.6 ######################################## [ 373s] libltdl-2.5.4-1.6 ######################################## [ 373s] liblua-5.1.5-1.3 ######################################## [ 373s] libpcre-8.45-1.4 ######################################## [ 373s] libsmack-1.3.1-1.3 ######################################## [ 374s] libsmartcols-2.41.2-1.4 ######################################## [ 374s] libzstd1-1.5.7-1.5 ######################################## [ 375s] rpm-4.14.1.1-1.6 ######################################## [ 375s] m4-1.4.20-1.1 ######################################## [ 375s] autoconf-2.71-1.6 ######################################## [ 375s] automake-1.16.5-1.6 ######################################## [ 375s] patch-2.8-1.3 ######################################## [ 375s] sed-4.1c-1.3 ######################################## [ 376s] util-linux-2.41.2-1.4 ######################################## [ 376s] libatomic-14.2.0-1.6 ######################################## [ 377s] libtool-2.5.4-1.6 ######################################## [ 377s] build-20120927-1.1 ######################################## [ 377s] libncurses-6.4-1.6 ######################################## [ 377s] zlib-devel-1.3.1-1.6 ######################################## [ 377s] util-macros-1.19.0-1.1 ######################################## [ 379s] libstdc++-devel-14.2.0-1.6 ######################################## [ 379s] build-compare-2023.06.18-1.2 ######################################## [ 404s] clang-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 404s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 419s] qemu-linux-user-x86_64-cross-9.2.3.1-2######################################## [ 424s] gcc-14.2.0-1.6 ######################################## [ 450s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 451s] util-linux-su-2.41.2-1.4 ######################################## [ 451s] rpm-build-4.14.1.1-1.6 ######################################## [ 451s] smack-1.3.1-1.3 ######################################## [ 451s] grep-2.5.2-1.3 ######################################## [ 467s] llvm-devel-21.1.1-3.1 ######################################## [ 579s] clang-21.1.1-3.1 ######################################## [ 581s] elfutils-0.189-1.6 ######################################## [ 581s] less-685-1.1 ######################################## [ 581s] file-5.46-1.3 ######################################## [ 582s] glibc-locale-2.40-1.6 ######################################## [ 582s] tzdata-2025b-1.1 ######################################## [ 585s] cpp-14.2.0-1.6 ######################################## [ 588s] gcc-c++-14.2.0-1.6 ######################################## [ 588s] gawk-3.1.5-1.1 ######################################## [ 588s] cpio-2.8-2.1 ######################################## [ 589s] diffutils-3.10-1.1 ######################################## [ 589s] hostname-3.23-1.1 ######################################## [ 589s] net-tools-2.0_20121208git-1.3 ######################################## [ 589s] update-alternatives-1.22.21-1.1 ######################################## [ 589s] which-2.17-1.1 ######################################## [ 589s] now finalizing build dir... [ 590s] ----------------------------------------------------------------- [ 590s] I have the following modifications for libpciaccess.spec: [ 590s] 6c6 [ 590s] < Release: 0 [ 590s] --- [ 590s] > Release: 1.1 [ 590s] 84a85 [ 590s] > %changelog [ 590s] build target is armv7l-tizen-linux [ 590s] ----------------------------------------------------------------- [ 590s] ----- building libpciaccess.spec (user abuild) [ 590s] ----------------------------------------------------------------- [ 590s] ----------------------------------------------------------------- [ 591s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Dev/standard/7325d11798514e0e18cf29ffc56035ff-libpciaccess' /home/abuild/rpmbuild/SOURCES/libpciaccess.spec [ 591s] Building target platforms: armv7l-tizen-linux [ 591s] Building for target armv7l-tizen-linux [ 591s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Xzx5aF [ 591s] + umask 022 [ 591s] + cd /home/abuild/rpmbuild/BUILD [ 591s] + cd /home/abuild/rpmbuild/BUILD [ 591s] + rm -rf libpciaccess-0.13.2 [ 591s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/libpciaccess-0.13.2.tar.bz2 [ 591s] + /bin/tar -xof - [ 591s] + STATUS=0 [ 591s] + '[' 0 -ne 0 ']' [ 591s] + cd libpciaccess-0.13.2 [ 591s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 591s] + echo 'Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch):' [ 591s] Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch): [ 591s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 591s] patching file src/Makefile.am [ 591s] + echo 'Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch):' [ 591s] Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch): [ 591s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 591s] patching file src/common_bridge.c [ 591s] patching file src/linux_sysfs.c [ 591s] + echo 'Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch):' [ 591s] Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch): [ 591s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 591s] patching file src/linux_sysfs.c [ 591s] + cp /home/abuild/rpmbuild/SOURCES/libpciaccess.manifest . [ 591s] + exit 0 [ 591s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.CLpKof [ 591s] + umask 022 [ 591s] + cd /home/abuild/rpmbuild/BUILD [ 591s] + CFLAGS='-O2 -fno-inline-functions -fstack-protector-strong --param=ssp-buffer-size=4 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 591s] + export CFLAGS [ 591s] + CXXFLAGS='-O2 -fno-inline-functions -fstack-protector-strong --param=ssp-buffer-size=4 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 591s] + export CXXFLAGS [ 591s] + LDFLAGS=-Wl,-z,relro,--as-needed,-O1,--hash-style=gnu [ 591s] + export LDFLAGS [ 591s] + cd libpciaccess-0.13.2 [ 591s] + ref=/usr/lib/rpm [ 591s] + mints=0 [ 591s] + case $(uname -m) in [ 591s] ++ uname -m [ 591s] + for s in guess sub [ 591s] ++ find -maxdepth 8 -name config.guess [ 591s] + for s in guess sub [ 591s] ++ find -maxdepth 8 -name config.sub [ 591s] + export AR=gcc-ar RANLIB=gcc-ranlib [ 591s] + AR=gcc-ar [ 591s] + RANLIB=gcc-ranlib [ 591s] + export CC=armv7l-tizen-linux-gnueabi-gcc CXX=armv7l-tizen-linux-gnueabi-g++ [ 591s] + CC=armv7l-tizen-linux-gnueabi-gcc [ 591s] + CXX=armv7l-tizen-linux-gnueabi-g++ [ 591s] + NOCONFIGURE=1 [ 591s] + CFLAGS='-O2 -fno-inline-functions -fstack-protector-strong --param=ssp-buffer-size=4 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 591s] + export CFLAGS [ 591s] + CXXFLAGS='-O2 -fno-inline-functions -fstack-protector-strong --param=ssp-buffer-size=4 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 591s] + export CXXFLAGS [ 591s] + LDFLAGS=-Wl,-z,relro,--as-needed,-O1,--hash-style=gnu [ 591s] + export LDFLAGS [ 591s] + ./autogen.sh --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 591s] autoreconf: export WARNINGS= [ 592s] autoreconf: Entering directory '.' [ 592s] autoreconf: configure.ac: not using Gettext [ 593s] autoreconf: running: aclocal -I m4 [ 596s] autoreconf: configure.ac: tracing [ 598s] autoreconf: running: libtoolize --copy [ 598s] libtoolize: putting auxiliary files in '.'. [ 598s] libtoolize: copying file './ltmain.sh' [ 598s] libtoolize: putting macros in 'm4'. [ 598s] libtoolize: copying file 'm4/libtool.m4' [ 598s] libtoolize: copying file 'm4/ltoptions.m4' [ 598s] libtoolize: copying file 'm4/ltsugar.m4' [ 598s] libtoolize: copying file 'm4/ltversion.m4' [ 598s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 598s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, [ 598s] libtoolize: and rerunning libtoolize and aclocal. [ 598s] autoreconf: configure.ac: not using Intltool [ 598s] autoreconf: configure.ac: not using Gtkdoc [ 598s] autoreconf: running: aclocal -I m4 [ 601s] autoreconf: running: /usr/bin/autoconf [ 602s] configure.ac:36: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 602s] configure.ac:36: You should run autoupdate. [ 602s] m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... [ 602s] configure.ac:36: the top level [ 602s] configure.ac:42: warning: The macro `AC_PROG_CC_C99' is obsolete. [ 602s] configure.ac:42: You should run autoupdate. [ 602s] ./lib/autoconf/c.m4:1659: AC_PROG_CC_C99 is expanded from... [ 602s] aclocal.m4:1809: XORG_COMPILER_BRAND is expanded from... [ 602s] aclocal.m4:1928: XORG_COMPILER_FLAGS is expanded from... [ 602s] aclocal.m4:2100: XORG_DEFAULT_OPTIONS is expanded from... [ 602s] configure.ac:42: the top level [ 604s] autoreconf: running: /usr/bin/autoheader [ 606s] autoreconf: running: automake --add-missing --copy --no-force [ 608s] configure.ac:33: installing './compile' [ 608s] configure.ac:36: installing './config.guess' [ 608s] configure.ac:36: installing './config.sub' [ 608s] configure.ac:32: installing './install-sh' [ 608s] configure.ac:32: installing './missing' [ 609s] scanpci/Makefile.am: installing './depcomp' [ 609s] autoreconf: Leaving directory '.' [ 610s] checking for a BSD-compatible install... /bin/install -c [ 610s] checking whether build environment is sane... yes [ 610s] checking for a race-free mkdir -p... /bin/mkdir -p [ 610s] checking for gawk... gawk [ 610s] checking whether make sets $(MAKE)... yes [ 610s] checking whether make supports nested variables... yes [ 610s] checking whether make supports the include directive... yes (GNU style) [ 610s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 610s] checking whether the C compiler works... yes [ 610s] checking for C compiler default output file name... a.out [ 610s] checking for suffix of executables... [ 611s] checking whether we are cross compiling... no [ 611s] checking for suffix of object files... o [ 611s] checking whether the compiler supports GNU C... yes [ 611s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 611s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 611s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 611s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 611s] checking for stdio.h... yes [ 611s] checking for stdlib.h... yes [ 611s] checking for string.h... yes [ 611s] checking for inttypes.h... yes [ 611s] checking for stdint.h... yes [ 611s] checking for strings.h... yes [ 611s] checking for sys/stat.h... yes [ 611s] checking for sys/types.h... yes [ 611s] checking for unistd.h... yes [ 612s] checking for wchar.h... yes [ 612s] checking for minix/config.h... no [ 612s] checking whether it is safe to define __EXTENSIONS__... yes [ 612s] checking whether _XOPEN_SOURCE should be defined... no [ 612s] checking build system type... armv7l-tizen-linux-gnueabi [ 612s] checking host system type... armv7l-tizen-linux-gnueabi [ 612s] checking how to print strings... printf [ 612s] checking for a sed that does not truncate output... /bin/sed [ 612s] checking for grep that handles long lines and -e... /bin/grep [ 612s] checking for egrep... /bin/grep -E [ 612s] checking for fgrep... /bin/grep -F [ 612s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 612s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 612s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 612s] checking the name lister (/bin/nm -B) interface... BSD nm [ 612s] checking whether ln -s works... yes [ 612s] checking the maximum length of command line arguments... 1572864 [ 612s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 612s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 612s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 612s] checking for file... file [ 612s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 612s] checking for objdump... objdump [ 612s] checking how to recognize dependent libraries... pass_all [ 612s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 612s] checking for dlltool... no [ 612s] checking how to associate runtime and link libraries... printf %s\n [ 612s] checking for armv7l-tizen-linux-gnueabi-ranlib... gcc-ranlib [ 612s] checking for armv7l-tizen-linux-gnueabi-ar... gcc-ar [ 612s] checking for archiver @FILE support... @ [ 612s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 612s] checking for strip... strip [ 612s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 612s] checking for sysroot... no [ 612s] checking for a working dd... /bin/dd [ 612s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 612s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 612s] checking for mt... no [ 612s] checking if : is a manifest tool... no [ 612s] checking for dlfcn.h... yes [ 612s] checking for objdir... .libs [ 612s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 612s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 612s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 613s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 613s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 613s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 613s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 613s] checking whether -lc should be explicitly linked in... no [ 613s] checking dynamic linker characteristics... GNU/Linux ld.so [ 613s] checking how to hardcode library paths into programs... immediate [ 613s] checking whether stripping libraries is possible... yes [ 613s] checking if libtool supports shared libraries... yes [ 613s] checking whether to build shared libraries... yes [ 613s] checking whether to build static libraries... yes [ 613s] checking for armv7l-tizen-linux-gnueabi-gcc options needed to detect all undeclared functions... none needed [ 613s] checking whether __clang__ is declared... no [ 613s] checking whether __INTEL_COMPILER is declared... no [ 613s] checking whether __SUNPRO_C is declared... no [ 613s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 613s] checking pkg-config is at least version 0.9.0... yes [ 613s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unknown-warning-option... no [ 613s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unused-command-line-argument... no [ 613s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wall... yes [ 613s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wpointer-arith... yes [ 613s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-declarations... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wformat=2... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wstrict-prototypes... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-prototypes... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wnested-externs... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wbad-function-cast... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wold-style-definition... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wdeclaration-after-statement... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wunused... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wuninitialized... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wshadow... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-noreturn... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-format-attribute... yes [ 614s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wredundant-decls... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wlogical-op... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=implicit... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=nonnull... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=init-self... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=main... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=missing-braces... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=sequence-point... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=return-type... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=trigraphs... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=array-bounds... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=write-strings... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=address... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=int-to-pointer-cast... yes [ 615s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=pointer-to-int-cast... yes [ 616s] checking if armv7l-tizen-linux-gnueabi-gcc supports -pedantic... yes [ 616s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror... yes [ 616s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=attributes... yes [ 616s] checking whether make supports nested variables... (cached) yes [ 616s] checking for special C compiler options needed for large files... no [ 616s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 616s] checking for err.h... yes [ 616s] checking for asm/mtrr.h... no [ 616s] checking for struct pci_io.pi_sel.pc_domain... no [ 616s] checking that generated files are newer than configure... done [ 616s] configure: creating ./config.status [ 617s] config.status: creating Makefile [ 617s] config.status: creating include/Makefile [ 617s] config.status: creating man/Makefile [ 617s] config.status: creating src/Makefile [ 617s] config.status: creating scanpci/Makefile [ 617s] config.status: creating pciaccess.pc [ 617s] config.status: creating config.h [ 617s] config.status: executing depfiles commands [ 617s] config.status: executing libtool commands [ 618s] + export 'CFLAGS=-O2 -fno-inline-functions -fstack-protector-strong --param=ssp-buffer-size=4 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -w' [ 618s] + CFLAGS='-O2 -fno-inline-functions -fstack-protector-strong --param=ssp-buffer-size=4 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -w' [ 618s] + export 'CFLAGS=-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 618s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 618s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 618s] + export CFLAGS [ 618s] + CXXFLAGS='-O2 -fno-inline-functions -fstack-protector-strong --param=ssp-buffer-size=4 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 618s] + export CXXFLAGS [ 618s] + LDFLAGS=-Wl,-z,relro,--as-needed,-O1,--hash-style=gnu [ 618s] + export LDFLAGS [ 618s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --with-pciids-path=/usr/share/misc --with-zlib [ 618s] checking for a BSD-compatible install... /bin/install -c [ 618s] checking whether build environment is sane... yes [ 618s] checking for a race-free mkdir -p... /bin/mkdir -p [ 618s] checking for gawk... gawk [ 618s] checking whether make sets $(MAKE)... yes [ 618s] checking whether make supports nested variables... yes [ 618s] checking whether make supports the include directive... yes (GNU style) [ 618s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 618s] checking whether the C compiler works... yes [ 618s] checking for C compiler default output file name... a.out [ 618s] checking for suffix of executables... [ 618s] checking whether we are cross compiling... no [ 618s] checking for suffix of object files... o [ 618s] checking whether the compiler supports GNU C... yes [ 618s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 618s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 618s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 618s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 618s] checking for stdio.h... yes [ 618s] checking for stdlib.h... yes [ 618s] checking for string.h... yes [ 619s] checking for inttypes.h... yes [ 619s] checking for stdint.h... yes [ 619s] checking for strings.h... yes [ 619s] checking for sys/stat.h... yes [ 619s] checking for sys/types.h... yes [ 619s] checking for unistd.h... yes [ 619s] checking for wchar.h... yes [ 619s] checking for minix/config.h... no [ 619s] checking whether it is safe to define __EXTENSIONS__... yes [ 619s] checking whether _XOPEN_SOURCE should be defined... no [ 619s] checking build system type... armv7l-tizen-linux-gnueabi [ 619s] checking host system type... armv7l-tizen-linux-gnueabi [ 619s] checking how to print strings... printf [ 619s] checking for a sed that does not truncate output... /bin/sed [ 619s] checking for grep that handles long lines and -e... /bin/grep [ 619s] checking for egrep... /bin/grep -E [ 619s] checking for fgrep... /bin/grep -F [ 619s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 619s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 619s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 619s] checking the name lister (/bin/nm -B) interface... BSD nm [ 619s] checking whether ln -s works... yes [ 619s] checking the maximum length of command line arguments... 1572864 [ 619s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 619s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 619s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 619s] checking for file... file [ 619s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 619s] checking for objdump... objdump [ 619s] checking how to recognize dependent libraries... pass_all [ 619s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 619s] checking for dlltool... no [ 619s] checking how to associate runtime and link libraries... printf %s\n [ 619s] checking for armv7l-tizen-linux-gnueabi-ranlib... gcc-ranlib [ 619s] checking for armv7l-tizen-linux-gnueabi-ar... gcc-ar [ 620s] checking for archiver @FILE support... @ [ 620s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 620s] checking for strip... strip [ 620s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 620s] checking for sysroot... no [ 620s] checking for a working dd... /bin/dd [ 620s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 620s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 620s] checking for mt... no [ 620s] checking if : is a manifest tool... no [ 620s] checking for dlfcn.h... yes [ 620s] checking for objdir... .libs [ 620s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... yes [ 620s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 620s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 620s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 620s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 620s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 620s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 620s] checking whether -lc should be explicitly linked in... no [ 620s] checking dynamic linker characteristics... GNU/Linux ld.so [ 620s] checking how to hardcode library paths into programs... immediate [ 620s] checking whether stripping libraries is possible... yes [ 620s] checking if libtool supports shared libraries... yes [ 620s] checking whether to build shared libraries... yes [ 620s] checking whether to build static libraries... no [ 620s] checking for armv7l-tizen-linux-gnueabi-gcc options needed to detect all undeclared functions... none needed [ 621s] checking whether __clang__ is declared... no [ 621s] checking whether __INTEL_COMPILER is declared... no [ 621s] checking whether __SUNPRO_C is declared... no [ 621s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 621s] checking pkg-config is at least version 0.9.0... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unknown-warning-option... no [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unused-command-line-argument... no [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wall... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wpointer-arith... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-declarations... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wformat=2... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wstrict-prototypes... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-prototypes... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wnested-externs... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wbad-function-cast... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wold-style-definition... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wdeclaration-after-statement... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wunused... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wuninitialized... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wshadow... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-noreturn... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-format-attribute... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wredundant-decls... yes [ 621s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wlogical-op... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=implicit... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=nonnull... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=init-self... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=main... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=missing-braces... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=sequence-point... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=return-type... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=trigraphs... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=array-bounds... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=write-strings... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=address... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=int-to-pointer-cast... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=pointer-to-int-cast... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -pedantic... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror... yes [ 622s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=attributes... yes [ 622s] checking whether make supports nested variables... (cached) yes [ 622s] checking for gzopen in -lz... yes [ 622s] checking for zlib.h... yes [ 622s] checking for special C compiler options needed for large files... no [ 622s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 622s] checking for err.h... yes [ 623s] checking for asm/mtrr.h... no [ 623s] checking for struct pci_io.pi_sel.pc_domain... no [ 623s] checking that generated files are newer than configure... done [ 623s] configure: creating ./config.status [ 623s] config.status: creating Makefile [ 623s] config.status: creating include/Makefile [ 623s] config.status: creating man/Makefile [ 623s] config.status: creating src/Makefile [ 623s] config.status: creating scanpci/Makefile [ 623s] config.status: creating pciaccess.pc [ 623s] config.status: creating config.h [ 624s] config.status: executing depfiles commands [ 624s] config.status: executing libtool commands [ 624s] + make -j12 [ 624s] make all-recursive [ 624s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 624s] Making all in include [ 624s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 624s] make[2]: Nothing to be done for 'all'. [ 624s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 624s] Making all in man [ 624s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 624s] GEN scanpci.1 [ 624s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 624s] Making all in src [ 624s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 624s] CC common_bridge.lo [ 624s] CC common_iterator.lo [ 624s] CC common_init.lo [ 624s] CC common_interface.lo [ 624s] CC common_io.lo [ 624s] CC common_capability.lo [ 624s] CC common_device_name.lo [ 624s] CC common_map.lo [ 624s] CC common_vgaarb.lo [ 624s] CC linux_sysfs.lo [ 624s] CC linux_devmem.lo [ 624s] CCLD libpciaccess.la [ 624s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 624s] Making all in scanpci [ 624s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 624s] CC scanpci.o [ 624s] CCLD scanpci [ 625s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 625s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 625s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 625s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 625s] + exit 0 [ 625s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.f3s6OC [ 625s] + umask 022 [ 625s] + cd /home/abuild/rpmbuild/BUILD [ 625s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 625s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 625s] + cd libpciaccess-0.13.2 [ 625s] + export AR=gcc-ar RANLIB=gcc-ranlib [ 625s] + AR=gcc-ar [ 625s] + RANLIB=gcc-ranlib [ 625s] + export CC=armv7l-tizen-linux-gnueabi-gcc CXX=armv7l-tizen-linux-gnueabi-g++ [ 625s] + CC=armv7l-tizen-linux-gnueabi-gcc [ 625s] + CXX=armv7l-tizen-linux-gnueabi-g++ [ 625s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 625s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm install [ 625s] Making install in include [ 625s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 625s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 625s] make[2]: Nothing to be done for 'install-exec-am'. [ 625s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/include' [ 625s] /bin/install -c -m 644 pciaccess.h '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/include' [ 625s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 625s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 625s] Making install in man [ 625s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 625s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 625s] make[2]: Nothing to be done for 'install-exec-am'. [ 625s] make[2]: Nothing to be done for 'install-data-am'. [ 625s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 625s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 625s] Making install in src [ 625s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 625s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 625s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib' [ 625s] /bin/sh ../libtool --mode=install /bin/install -c libpciaccess.la '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib' [ 625s] libtool: install: /bin/install -c .libs/libpciaccess.so.0.13.2 /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2 [ 625s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.13.2 libpciaccess.so.0; }; }) [ 625s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.13.2 libpciaccess.so; }; }) [ 625s] libtool: install: /bin/install -c .libs/libpciaccess.lai /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.la [ 625s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 625s] make[2]: Nothing to be done for 'install-data-am'. [ 625s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 625s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 625s] Making install in scanpci [ 625s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 625s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 625s] make[2]: Nothing to be done for 'install-exec-am'. [ 625s] make[2]: Nothing to be done for 'install-data-am'. [ 625s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 625s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 625s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 625s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 625s] make[2]: Nothing to be done for 'install-exec-am'. [ 625s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/pkgconfig' [ 625s] /bin/install -c -m 644 pciaccess.pc '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/pkgconfig' [ 625s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 625s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 625s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/info/dir [ 625s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*\.la$' [ 625s] + xargs rm -f -- [ 625s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*\.a$' [ 625s] + xargs rm -f -- [ 625s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/info [ 625s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc/packages [ 625s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc/libpciaccess [ 625s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc/libpciaccess-0.13.2 [ 625s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/gtk-doc [ 625s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc [ 625s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/man [ 625s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*/man/man./.*.[0-9]' [ 625s] + xargs rm -f -- [ 625s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*/man/../man./.*.[0-9]' [ 625s] + xargs rm -f -- [ 625s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 625s] + xargs rm -f -- [ 625s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.13.2-1.1 --unique-debug-src-base libpciaccess-0.13.2-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2 [ 625s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2 [ 625s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2: Unknown debugging section .debug_loclists [ 625s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2: Unknown debugging section .debug_rnglists [ 625s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2: DWARF version 5 unhandled [ 625s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debuginfo.manifest [ 625s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debugsource.manifest [ 625s] + /usr/lib/rpm/check-buildroot [ 625s] + /usr/lib/rpm//brp-compress [ 625s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 625s] + /usr/lib/rpm/brp-python-hardlink [ 625s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 626s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/isu.list [ 626s] ~/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 626s] ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 626s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 626s] Processing files: libpciaccess-0.13.2-1.1.armv7l [ 626s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 626s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 626s] [ 626s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Rd7WOr [ 626s] + umask 022 [ 626s] + cd /home/abuild/rpmbuild/BUILD [ 626s] + cd libpciaccess-0.13.2 [ 626s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess [ 626s] + export LC_ALL=C [ 626s] + LC_ALL=C [ 626s] + export LICENSEDIR [ 626s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess [ 626s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess [ 626s] + exit 0 [ 626s] Provides: libpciaccess = 0.13.2-1.1 libpciaccess(armv7l-32) = 0.13.2-1.1 libpciaccess.so.0 [ 626s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 626s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 626s] Requires(post): /sbin/ldconfig [ 626s] Requires(postun): /sbin/ldconfig [ 626s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.33) libc.so.6(GLIBC_2.38) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 libz.so.1(ZLIB_1.2.3.3) rtld(GNU_HASH) [ 626s] Processing files: libpciaccess-debugsource-0.13.2-1.1.armv7l [ 626s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/debugsourcefiles.list [ 626s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 626s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 626s] [ 626s] Processing files: libpciaccess-devel-0.13.2-1.1.armv7l [ 626s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 626s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 626s] [ 626s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.hHlMqQ [ 626s] + umask 022 [ 626s] + cd /home/abuild/rpmbuild/BUILD [ 626s] + cd libpciaccess-0.13.2 [ 626s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess-devel [ 626s] + export LC_ALL=C [ 626s] + LC_ALL=C [ 626s] + export LICENSEDIR [ 626s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess-devel [ 626s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess-devel [ 626s] + exit 0 [ 626s] Provides: libpciaccess-devel = 0.13.2-1.1 libpciaccess-devel(armv7l-32) = 0.13.2-1.1 pkgconfig(pciaccess) = 0.13.2 [ 626s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 626s] Requires: /usr/bin/pkg-config libpciaccess.so.0 [ 626s] Processing files: libpciaccess-debuginfo-0.13.2-1.1.armv7l [ 626s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 626s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 626s] [ 626s] Provides: libpciaccess-debuginfo = 0.13.2-1.1 libpciaccess-debuginfo(armv7l-32) = 0.13.2-1.1 [ 626s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 626s] Recommends: libpciaccess-debugsource(armv7l-32) = 0.13.2-1.1 [ 626s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 626s] Wrote: /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-1.1.src.rpm [ 626s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-0.13.2-1.1.armv7l.rpm [ 626s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debugsource-0.13.2-1.1.armv7l.rpm [ 626s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-devel-0.13.2-1.1.armv7l.rpm [ 626s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debuginfo-0.13.2-1.1.armv7l.rpm [ 626s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.pPvfDo [ 626s] + umask 022 [ 626s] + cd /home/abuild/rpmbuild/BUILD [ 626s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 626s] + cd libpciaccess-0.13.2 [ 626s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 626s] + exit 0 [ 626s] ... checking for files with abuild user/group [ 626s] ... creating baselibs [ 627s] no targets for arch armv7l, nothing to do [ 627s] [ 627s] 59d282522769 finished "build libpciaccess.spec" at Tue Jan 6 04:15:01 UTC 2026. [ 627s]