[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 25822038ea0c started "build python3-pygments.spec" at Tue Jan 6 07:32:53 UTC 2026. [ 0s] [ 0s] Building python3-pygments for project 'Tizen-Base-Dev' repository 'standard' arch 'armv7l' srcmd5 'ace0224db7ca624500488da785307792' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27/.build-srcdir/python3-pygments.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27/.build-srcdir/python3-pygments.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/27/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27/.build-srcdir/python3-pygments.spec build ... [ 10s] registering binfmt handlers for cross build [ 10s] cycle: nss -> libsoftokn3 [ 10s] breaking dependency nss -> libsoftokn3 [ 10s] [1/44] preinstalling libmagic-data... [ 11s] [2/44] preinstalling libncurses... [ 11s] [3/44] preinstalling setup... [ 11s] [4/44] preinstalling filesystem... [ 11s] [5/44] preinstalling glibc... [ 12s] [6/44] preinstalling libgcc... [ 13s] [7/44] preinstalling bash... [ 13s] [8/44] preinstalling diffutils... [ 13s] [9/44] preinstalling grep... [ 13s] [10/44] preinstalling libattr... [ 13s] [11/44] preinstalling libblkid... [ 13s] [12/44] preinstalling libbz2... [ 13s] [13/44] preinstalling libcap... [ 13s] [14/44] preinstalling libfreebl3... [ 13s] [15/44] preinstalling liblua... [ 13s] [16/44] preinstalling liblzma... [ 13s] [17/44] preinstalling libopenssl3... [ 13s] [18/44] preinstalling libpopt... [ 13s] [19/44] preinstalling libreadline... [ 13s] [20/44] preinstalling libsmack... [ 13s] [21/44] preinstalling libsqlite... [ 13s] [22/44] preinstalling libuuid... [ 13s] [23/44] preinstalling libxcrypt... [ 13s] [24/44] preinstalling libxml2... [ 13s] [25/44] preinstalling libzstd1... [ 13s] [26/44] preinstalling nspr... [ 13s] [27/44] preinstalling sed... [ 13s] [28/44] preinstalling zlib... [ 13s] [29/44] preinstalling clang-accel-x86_64-armv7l... [ 39s] [30/44] preinstalling qemu-accel-x86_64-armv7l... [ 79s] [31/44] preinstalling qemu-linux-user-x86_64-cross... [ 102s] [32/44] preinstalling coreutils... [ 102s] [33/44] preinstalling libacl... [ 102s] [34/44] preinstalling libelf... [ 102s] [35/44] preinstalling libmount... [ 103s] [36/44] preinstalling smack... [ 103s] [37/44] preinstalling bzip2... [ 103s] [38/44] preinstalling libmagic... [ 103s] [39/44] preinstalling tar... [ 103s] [40/44] preinstalling util-linux... [ 103s] [41/44] preinstalling rpm... [ 103s] [42/44] preinstalling util-linux-su... [ 103s] [43/44] preinstalling nss... [ 103s] [44/44] preinstalling libsoftokn3... [ 104s] running qemu-linux-user-x86_64-cross postinstall script [ 104s] running qemu-accel-x86_64-armv7l postinstall script [ 104s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 104s] running clang-accel-x86_64-armv7l postinstall script [ 104s] running setup postinstall script [ 104s] chroot: failed to run command '': No such file or directory [ 104s] initializing rpm db... [ 105s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 105s] breaking dependency libxcrypt-devel -> glibc-devel [ 105s] cycle: libsoftokn3 -> nss [ 105s] breaking dependency nss -> libsoftokn3 [ 105s] done [ 105s] querying package ids... [ 105s] [1/123] cumulate libmagic-data-5.46-1.4 [ 105s] [2/123] cumulate python3-editables-0.5-1.1 [ 105s] [3/123] cumulate python3-pathspec-0.12.1-1.1 [ 105s] [4/123] cumulate python3-pluggy-1.3.0-1.1 [ 105s] [5/123] cumulate python3-pyparsing-3.1.1-1.1 [ 105s] [6/123] cumulate python3-pyproject_hooks-1.0.0-1.1 [ 105s] [7/123] cumulate python3-six-1.16.0-1.1 [ 105s] [8/123] cumulate python3-trove_classifiers-2023.11.29-1.1 [ 105s] [9/123] cumulate python3-typing_extensions-4.9.0-1.1 [ 105s] [10/123] cumulate setup-0.9-1.1 [ 105s] [11/123] cumulate filesystem-3.1-1.1 [ 105s] [12/123] cumulate python3-packaging-23.2-1.1 [ 105s] [13/123] cumulate glibc-2.40-1.6 [ 105s] [14/123] cumulate libatomic-14.2.0-1.6 [ 105s] [15/123] cumulate libgcc-14.2.0-1.6 [ 105s] [16/123] cumulate bash-3.2.57-1.1 [ 105s] [17/123] cumulate cpio-2.8-1.1 [ 105s] [18/123] cumulate diffutils-3.10-1.1 [ 105s] [19/123] cumulate findutils-4.3.8-1.4 [ 105s] [20/123] cumulate gdbm-1.8.3-1.7 [ 105s] [21/123] cumulate hostname-3.23-1.1 [ 105s] [22/123] cumulate libattr-2.5.1-1.4 [ 105s] [23/123] cumulate libblkid-2.41.2-1.5 [ 105s] [24/123] cumulate libbz2-1.0.8-1.5 [ 105s] [25/123] cumulate libcap-2.73-1.4 [ 105s] [26/123] cumulate libexpat-2.7.3-1.6 [ 105s] [27/123] cumulate libffi-3.4.7-1.6 [ 105s] [28/123] cumulate libfreebl3-3.109-1.1 [ 105s] [29/123] cumulate libgfortran-14.2.0-1.6 [ 105s] [30/123] cumulate libgomp-14.2.0-1.6 [ 105s] [31/123] cumulate libitm-14.2.0-1.6 [ 105s] [32/123] cumulate libltdl-2.5.4-1.6 [ 105s] [33/123] cumulate liblua-5.1.5-1.3 [ 105s] [34/123] cumulate liblzma-5.8.1-1.7 [ 105s] [35/123] cumulate libopenssl3-3.0.18-1.4 [ 105s] [36/123] cumulate libpcre-8.45-1.4 [ 105s] [37/123] cumulate libpopt-1.16-1.4 [ 105s] [38/123] cumulate libpython3_131_0-3.13.1-1.6 [ 105s] [39/123] cumulate libsmack-1.3.1-1.4 [ 105s] [40/123] cumulate libsmartcols-2.41.2-1.5 [ 105s] [41/123] cumulate libsqlite-3.51.0-1.4 [ 105s] [42/123] cumulate libstdc++-14.2.0-1.6 [ 105s] [43/123] cumulate libuuid-2.41.2-1.5 [ 105s] [44/123] cumulate libxcrypt-4.4.36-1.7 [ 105s] [45/123] cumulate libxml2-2.13.5-1.6 [ 105s] [46/123] cumulate libzstd1-1.5.7-1.5 [ 105s] [47/123] cumulate m4-1.4.20-1.1 [ 105s] [48/123] cumulate net-tools-2.0_20121208git-1.4 [ 105s] [49/123] cumulate nspr-4.36-1.1 [ 105s] [50/123] cumulate patch-2.8-1.4 [ 105s] [51/123] cumulate pkg-config-0.29.2-1.4 [ 105s] [52/123] cumulate sed-4.1c-1.4 [ 105s] [53/123] cumulate update-alternatives-1.22.21-1.1 [ 105s] [54/123] cumulate which-2.17-1.1 [ 105s] [55/123] cumulate zlib-1.3.1-1.7 [ 105s] [56/123] cumulate build-compare-2023.06.18-1.1 [ 105s] [57/123] cumulate clang-accel-x86_64-armv7l-0.4-1.1 [ 105s] [58/123] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 105s] [59/123] cumulate libstdc++-devel-14.2.0-1.6 [ 105s] [60/123] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-2.1 [ 105s] [61/123] cumulate cpp-14.2.0-1.6 [ 105s] [62/123] cumulate gcc-c++-14.2.0-1.6 [ 105s] [63/123] cumulate binutils-libs-2.43-1.6 [ 105s] [64/123] cumulate coreutils-6.9-14.1 [ 105s] [65/123] cumulate gawk-3.1.5-1.1 [ 105s] [66/123] cumulate grep-2.5.2-1.3 [ 105s] [67/123] cumulate libacl-2.3.2-1.4 [ 105s] [68/123] cumulate libcc1-14.2.0-1.6 [ 105s] [69/123] cumulate libelf-0.189-1.6 [ 105s] [70/123] cumulate liblastlog2-2.41.2-1.5 [ 105s] [71/123] cumulate libmount-2.41.2-1.5 [ 105s] [72/123] cumulate make-4.4.1-1.3 [ 105s] [73/123] cumulate nss-certs-3.109-1.1 [ 105s] [74/123] cumulate smack-1.3.1-1.4 [ 105s] [75/123] cumulate bzip2-1.0.8-1.5 [ 105s] [76/123] cumulate libfdisk-2.41.2-1.5 [ 105s] [77/123] cumulate libmagic-5.46-1.4 [ 105s] [78/123] cumulate xz-5.8.1-1.7 [ 105s] [79/123] cumulate libllvm-21.1.1-3.1 [ 105s] [80/123] cumulate perl-5.38.0-1.5 [ 105s] [81/123] cumulate build-mkbaselibs-20120927-1.1 [ 105s] [82/123] cumulate linux-glibc-devel-6.6-1.7 [ 105s] [83/123] cumulate terminfo-base-full-6.4-1.6 [ 105s] [84/123] cumulate autoconf-2.71-1.7 [ 105s] [85/123] cumulate glibc-locale-2.40-1.6 [ 105s] [86/123] cumulate tar-1.17-1.1 [ 105s] [87/123] cumulate binutils-2.43-1.6 [ 105s] [88/123] cumulate file-5.46-1.4 [ 105s] [89/123] cumulate gzip-1.3.12-1.4 [ 105s] [90/123] cumulate pam-1.1.6-1.3 [ 105s] [91/123] cumulate tzdata-2025b-1.1 [ 105s] [92/123] cumulate libdw-0.189-1.6 [ 105s] [93/123] cumulate gcc-14.2.0-1.6 [ 105s] [94/123] cumulate libarchive-3.8.1-1.5 [ 105s] [95/123] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 105s] [96/123] cumulate automake-1.16.5-1.6 [ 105s] [97/123] cumulate libasm-0.189-1.6 [ 105s] [98/123] cumulate libncurses6-6.4-1.6 [ 105s] [99/123] cumulate build-20120927-1.1 [ 105s] [100/123] cumulate rpm-4.14.1.1-1.6 [ 105s] [101/123] cumulate libncurses-6.4-1.6 [ 105s] [102/123] cumulate less-685-1.1 [ 105s] [103/123] cumulate libreadline-5.2-1.5 [ 105s] [104/123] cumulate libtool-2.5.4-1.6 [ 105s] [105/123] cumulate elfutils-0.189-1.6 [ 105s] [106/123] cumulate lldb-21.1.1-3.1 [ 105s] [107/123] cumulate llvm-21.1.1-3.1 [ 105s] [108/123] cumulate python3-base-3.13.1-1.6 [ 105s] [109/123] cumulate util-linux-2.41.2-1.5 [ 105s] [110/123] cumulate python3-3.13.1-1.1 [ 105s] [111/123] cumulate python3-build-1.0.3-1.1 [ 105s] [112/123] cumulate util-linux-su-2.41.2-1.5 [ 105s] [113/123] cumulate python3-devel-3.13.1-1.6 [ 105s] [114/123] cumulate python3-hatchling-1.21.0-1.1 [ 105s] [115/123] cumulate llvm-devel-21.1.1-3.1 [ 105s] [116/123] cumulate clang-21.1.1-3.1 [ 105s] [117/123] cumulate python3-setuptools-69.0.2-1.1 [ 105s] [118/123] cumulate python3-pip-23.3.1-1.1 [ 105s] [119/123] cumulate libxcrypt-devel-4.4.36-1.7 [ 105s] [120/123] cumulate nss-3.109-1.1 [ 105s] [121/123] cumulate glibc-devel-2.40-1.6 [ 105s] [122/123] cumulate libsoftokn3-3.109-1.1 [ 105s] [123/123] cumulate rpm-build-4.14.1.1-1.6 [ 105s] now installing cumulated packages [ 234s] Preparing... ######################################## [ 234s] Updating / installing... [ 234s] setup-0.9-1.1 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 234s] ########################## [ 234s] filesystem-3.1-1.1 ######################################## [ 234s] python3-typing_extensions-4.9.0-1.1 ######################################## [ 234s] python3-trove_classifiers-2023.11.29-1######################################## [ 234s] python3-six-1.16.0-1.1 ######################################## [ 234s] python3-pyproject_hooks-1.0.0-1.1 ######################################## [ 234s] python3-pyparsing-3.1.1-1.1 ######################################## [ 234s] python3-packaging-23.2-1.1 ######################################## [ 234s] python3-pluggy-1.3.0-1.1 ######################################## [ 234s] python3-pathspec-0.12.1-1.1 ######################################## [ 234s] python3-editables-0.5-1.1 ######################################## [ 235s] libmagic-data-5.46-1.4 ######################################## [ 236s] glibc-2.40-1.6 ######################################## [ 236s] libgcc-14.2.0-1.6 ######################################## [ 236s] bash-3.2.57-1.1 ######################################## [ 236s] zlib-1.3.1-1.7 ######################################## [ 237s] libstdc++-14.2.0-1.6 ######################################## [ 237s] coreutils-6.9-14.1 ######################################## [ 237s] libbz2-1.0.8-1.5 ######################################## [ 238s] liblzma-5.8.1-1.7 ######################################## [ 238s] libelf-0.189-1.6 ######################################## [ 238s] libxml2-2.13.5-1.6 ######################################## [ 238s] libdw-0.189-1.6 ######################################## [ 238s] libxcrypt-4.4.36-1.7 ######################################## [ 239s] libblkid-2.41.2-1.5 ######################################## [ 239s] libopenssl3-3.0.18-1.4 ######################################## [ 239s] libsqlite-3.51.0-1.4 ######################################## [ 239s] nspr-4.36-1.1 ######################################## [ 240s] pam-1.1.6-1.3 ######################################## [ 240s] libmagic-5.46-1.4 ######################################## [ 240s] gdbm-1.8.3-1.7 ######################################## [ 249s] perl-5.38.0-1.5 ######################################## [ 249s] libfreebl3-3.109-1.1 ######################################## [ 249s] libpopt-1.16-1.4 ######################################## [ 249s] libpython3_131_0-3.13.1-1.6 ######################################## [ 250s] libuuid-2.41.2-1.5 ######################################## [ 250s] pkg-config-0.29.2-1.4 ######################################## [ 250s] build-mkbaselibs-20120927-1.1 ######################################## [ 250s] linux-glibc-devel-6.6-1.7 ######################################## [ 250s] libxcrypt-devel-4.4.36-1.7 ######################################## [ 250s] glibc-devel-2.40-1.6 ######################################## [ 251s] terminfo-base-full-6.4-1.6 ######################################## [ 251s] libncurses6-6.4-1.6 ######################################## [ 251s] libreadline-5.2-1.5 ######################################## [ 260s] lldb-21.1.1-3.1 ######################################## [ 260s] libfdisk-2.41.2-1.5 ######################################## [ 260s] nss-certs-3.109-1.1 ######################################## [ 260s] libsoftokn3-3.109-1.1 ######################################## [ 261s] nss-3.109-1.1 ######################################## [ 261s] liblastlog2-2.41.2-1.5 ######################################## [ 261s] libmount-2.41.2-1.5 ######################################## [ 261s] libasm-0.189-1.6 ######################################## [ 269s] libllvm-21.1.1-3.1 ######################################## [ 439s] llvm-21.1.1-3.1 ######################################## [ 443s] xz-5.8.1-1.7 ######################################## [ 443s] bzip2-1.0.8-1.5 ######################################## [ 443s] gzip-1.3.12-1.4 ######################################## [ 443s] libcc1-14.2.0-1.6 ######################################## [ 443s] binutils-libs-2.43-1.6 ######################################## [ 447s] binutils-2.43-1.6 ######################################## [ 447s] make-4.4.1-1.3 ######################################## [ 447s] findutils-4.3.8-1.4 ######################################## [ 447s] libattr-2.5.1-1.4 ######################################## [ 447s] libacl-2.3.2-1.4 ######################################## [ 448s] tar-1.17-1.1 ######################################## [ 448s] libarchive-3.8.1-1.5 ######################################## [ 448s] libcap-2.73-1.4 ######################################## [ 448s] libexpat-2.7.3-1.6 ######################################## [ 449s] libffi-3.4.7-1.6 ######################################## [ 453s] python3-base-3.13.1-1.6 ######################################## [ 454s] python3-3.13.1-1.1 ######################################## [ 455s] python3-setuptools-69.0.2-1.1 ######################################## [ 455s] libgfortran-14.2.0-1.6 ######################################## [ 455s] libgomp-14.2.0-1.6 ######################################## [ 456s] libitm-14.2.0-1.6 ######################################## [ 456s] libltdl-2.5.4-1.6 ######################################## [ 456s] liblua-5.1.5-1.3 ######################################## [ 457s] libpcre-8.45-1.4 ######################################## [ 457s] libsmack-1.3.1-1.4 ######################################## [ 457s] libsmartcols-2.41.2-1.5 ######################################## [ 458s] libzstd1-1.5.7-1.5 ######################################## [ 459s] rpm-4.14.1.1-1.6 ######################################## [ 459s] m4-1.4.20-1.1 ######################################## [ 460s] autoconf-2.71-1.7 ######################################## [ 460s] automake-1.16.5-1.6 ######################################## [ 460s] patch-2.8-1.4 ######################################## [ 460s] sed-4.1c-1.4 ######################################## [ 461s] util-linux-2.41.2-1.5 ######################################## [ 462s] libatomic-14.2.0-1.6 ######################################## [ 462s] libtool-2.5.4-1.6 ######################################## [ 463s] python3-pip-23.3.1-1.1 ######################################## [ 463s] python3-build-1.0.3-1.1 ######################################## [ 463s] python3-hatchling-1.21.0-1.1 ######################################## [ 463s] build-20120927-1.1 ######################################## [ 463s] libncurses-6.4-1.6 ######################################## [ 465s] libstdc++-devel-14.2.0-1.6 ######################################## [ 466s] build-compare-2023.06.18-1.1 ######################################## [ 493s] clang-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 495s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 510s] qemu-linux-user-x86_64-cross-9.2.3.1-2######################################## [ 515s] gcc-14.2.0-1.6 ######################################## [ 557s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 558s] util-linux-su-2.41.2-1.5 ######################################## [ 558s] rpm-build-4.14.1.1-1.6 ######################################## [ 558s] smack-1.3.1-1.4 ######################################## [ 558s] grep-2.5.2-1.3 ######################################## [ 558s] python3-devel-3.13.1-1.6 ######################################## [ 572s] llvm-devel-21.1.1-3.1 ######################################## [ 680s] clang-21.1.1-3.1 ######################################## [ 681s] elfutils-0.189-1.6 ######################################## [ 681s] less-685-1.1 ######################################## [ 681s] file-5.46-1.4 ######################################## [ 683s] glibc-locale-2.40-1.6 ######################################## [ 683s] tzdata-2025b-1.1 ######################################## [ 685s] cpp-14.2.0-1.6 ######################################## [ 688s] gcc-c++-14.2.0-1.6 ######################################## [ 688s] gawk-3.1.5-1.1 ######################################## [ 688s] cpio-2.8-1.1 ######################################## [ 688s] diffutils-3.10-1.1 ######################################## [ 688s] hostname-3.23-1.1 ######################################## [ 688s] net-tools-2.0_20121208git-1.4 ######################################## [ 688s] update-alternatives-1.22.21-1.1 ######################################## [ 688s] which-2.17-1.1 ######################################## [ 689s] now finalizing build dir... [ 690s] ----------------------------------------------------------------- [ 690s] I have the following modifications for python3-pygments.spec: [ 690s] 4c4 [ 690s] < Release: 1 [ 690s] --- [ 690s] > Release: 1.1 [ 691s] build target is armv7l-tizen-linux [ 691s] ----------------------------------------------------------------- [ 691s] ----- building python3-pygments.spec (user abuild) [ 691s] ----------------------------------------------------------------- [ 691s] ----------------------------------------------------------------- [ 691s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Dev/standard/ace0224db7ca624500488da785307792-python3-pygments' /home/abuild/rpmbuild/SOURCES/python3-pygments.spec [ 691s] Building target platforms: armv7l-tizen-linux [ 691s] Building for target armv7l-tizen-linux [ 691s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.RrupuM [ 691s] + umask 022 [ 691s] + cd /home/abuild/rpmbuild/BUILD [ 691s] + cd /home/abuild/rpmbuild/BUILD [ 691s] + rm -rf python3-pygments-2.17.2 [ 691s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python3-pygments-2.17.2.tar.gz [ 691s] + /bin/tar -xof - [ 696s] + STATUS=0 [ 696s] + '[' 0 -ne 0 ']' [ 696s] + cd python3-pygments-2.17.2 [ 696s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 696s] + echo 'Patch #0 (0001-Bump-to-2.17.2.patch):' [ 696s] Patch #0 (0001-Bump-to-2.17.2.patch): [ 696s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 696s] patching file .gitignore [ 696s] + cp /home/abuild/rpmbuild/SOURCES/python3-pygments.manifest . [ 696s] + exit 0 [ 696s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.t2V5HK [ 696s] + umask 022 [ 696s] + cd /home/abuild/rpmbuild/BUILD [ 696s] + CFLAGS='-O2 -fno-inline-functions -fstack-protector-strong --param=ssp-buffer-size=4 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 696s] + export CFLAGS [ 696s] + CXXFLAGS='-O2 -fno-inline-functions -fstack-protector-strong --param=ssp-buffer-size=4 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 696s] + export CXXFLAGS [ 696s] + LDFLAGS=-Wl,-z,relro,--as-needed,-O1,--hash-style=gnu [ 696s] + export LDFLAGS [ 696s] + cd python3-pygments-2.17.2 [ 696s] + ref=/usr/lib/rpm [ 696s] + mints=0 [ 696s] + case $(uname -m) in [ 696s] ++ uname -m [ 696s] + for s in guess sub [ 696s] ++ find -maxdepth 8 -name config.guess [ 696s] + for s in guess sub [ 696s] ++ find -maxdepth 8 -name config.sub [ 696s] + export AR=gcc-ar RANLIB=gcc-ranlib [ 696s] + AR=gcc-ar [ 696s] + RANLIB=gcc-ranlib [ 696s] + export CC=armv7l-tizen-linux-gnueabi-gcc CXX=armv7l-tizen-linux-gnueabi-g++ [ 696s] + CC=armv7l-tizen-linux-gnueabi-gcc [ 696s] + CXX=armv7l-tizen-linux-gnueabi-g++ [ 696s] + /usr/bin/python3 -m build -n [ 698s] * Getting build dependencies for sdist... [ 699s] * Building sdist... [ 718s] * Building wheel from sdist [ 718s] * Getting build dependencies for wheel... [ 719s] * Building wheel... [ 721s] Successfully built pygments-2.17.2.tar.gz and pygments-2.17.2-py3-none-any.whl [ 722s] + exit 0 [ 722s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.OesVCl [ 722s] + umask 022 [ 722s] + cd /home/abuild/rpmbuild/BUILD [ 722s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 722s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 722s] + cd python3-pygments-2.17.2 [ 722s] + export AR=gcc-ar RANLIB=gcc-ranlib [ 722s] + AR=gcc-ar [ 722s] + RANLIB=gcc-ranlib [ 722s] + export CC=armv7l-tizen-linux-gnueabi-gcc CXX=armv7l-tizen-linux-gnueabi-g++ [ 722s] + CC=armv7l-tizen-linux-gnueabi-gcc [ 722s] + CXX=armv7l-tizen-linux-gnueabi-g++ [ 722s] + /usr/bin/python3 -m pip install --root /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm ./dist/pygments-2.17.2-py3-none-any.whl [ 725s] Processing ./dist/pygments-2.17.2-py3-none-any.whl [ 726s] Installing collected packages: pygments [ 733s] WARNING: The script pygmentize is installed in '/home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm/usr/bin' which is not on PATH. [ 733s] Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. [ 734s] Successfully installed pygments-2.17.2 [ 734s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.17.2-1.1 --unique-debug-src-base python3-pygments-2.17.2-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2 [ 734s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2/python3-pygments-debuginfo.manifest [ 734s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2/python3-pygments-debugsource.manifest [ 734s] + /usr/lib/rpm/check-buildroot [ 735s] + /usr/lib/rpm//brp-compress [ 735s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 736s] + /usr/lib/rpm/brp-python-hardlink [ 767s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 767s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2/isu.list [ 767s] ~/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm ~/rpmbuild/BUILD/python3-pygments-2.17.2 [ 767s] ~/rpmbuild/BUILD/python3-pygments-2.17.2 [ 767s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 767s] Processing files: python3-pygments-2.17.2-1.1.noarch [ 767s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 767s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 767s] [ 767s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.QVaP1R [ 767s] + umask 022 [ 767s] + cd /home/abuild/rpmbuild/BUILD [ 767s] + cd python3-pygments-2.17.2 [ 767s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm/usr/share/licenses/python3-pygments [ 767s] + export LC_ALL=C [ 767s] + LC_ALL=C [ 767s] + export LICENSEDIR [ 767s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm/usr/share/licenses/python3-pygments [ 767s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm/usr/share/licenses/python3-pygments [ 767s] + exit 0 [ 778s] Provides: python3-pygments = 2.17.2-1.1 [ 778s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 778s] Requires: /usr/bin/python3 [ 778s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 779s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-pygments-2.17.2-1.1.src.rpm [ 782s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-pygments-2.17.2-1.1.noarch.rpm [ 782s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Q7pcFE [ 782s] + umask 022 [ 782s] + cd /home/abuild/rpmbuild/BUILD [ 782s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 782s] + cd python3-pygments-2.17.2 [ 782s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 782s] + exit 0 [ 782s] ... checking for files with abuild user/group [ 782s] ... creating baselibs [ 783s] [ 783s] 25822038ea0c finished "build python3-pygments.spec" at Tue Jan 6 07:45:56 UTC 2026. [ 783s]