[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] c3cbe3df19f9 started "build python3-libxml2.spec" at Fri Jan 2 12:44:52 UTC 2026. [ 0s] [ 0s] Building python3-libxml2 for project 'Tizen-Base-Dev' repository 'standard' arch 'armv7l' srcmd5 '970d2d0bbdce2b433057d5956cb9196e' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22/.build-srcdir/python3-libxml2.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22/.build-srcdir/python3-libxml2.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/22/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22/.build-srcdir/python3-libxml2.spec build ... [ 2s] registering binfmt handlers for cross build [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] [1/43] preinstalling libmagic-data... [ 4s] [2/43] preinstalling libncurses... [ 4s] [3/43] preinstalling setup... [ 4s] [4/43] preinstalling filesystem... [ 4s] [5/43] preinstalling glibc... [ 5s] [6/43] preinstalling libgcc... [ 5s] [7/43] preinstalling bash... [ 5s] [8/43] preinstalling diffutils... [ 5s] [9/43] preinstalling grep... [ 6s] [10/43] preinstalling libattr... [ 6s] [11/43] preinstalling libblkid... [ 6s] [12/43] preinstalling libbz2... [ 6s] [13/43] preinstalling libcap... [ 6s] [14/43] preinstalling libfreebl3... [ 6s] [15/43] preinstalling liblua... [ 7s] [16/43] preinstalling liblzma... [ 7s] [17/43] preinstalling libopenssl3... [ 7s] [18/43] preinstalling libpopt... [ 7s] [19/43] preinstalling libreadline... [ 7s] [20/43] preinstalling libsmack... [ 8s] [21/43] preinstalling libsqlite... [ 8s] [22/43] preinstalling libuuid... [ 8s] [23/43] preinstalling libxcrypt... [ 8s] [24/43] preinstalling libxml2... [ 9s] [25/43] preinstalling libzstd1... [ 9s] [26/43] preinstalling nspr... [ 9s] [27/43] preinstalling sed... [ 10s] [28/43] preinstalling zlib... [ 10s] [29/43] preinstalling qemu-accel-x86_64-armv7l... [ 27s] [30/43] preinstalling qemu-linux-user-x86_64-cross... [ 34s] [31/43] preinstalling coreutils... [ 35s] [32/43] preinstalling libacl... [ 35s] [33/43] preinstalling libelf... [ 35s] [34/43] preinstalling libmount... [ 36s] [35/43] preinstalling smack... [ 36s] [36/43] preinstalling bzip2... [ 36s] [37/43] preinstalling libmagic... [ 36s] [38/43] preinstalling tar... [ 36s] [39/43] preinstalling util-linux... [ 37s] [40/43] preinstalling rpm... [ 38s] [41/43] preinstalling util-linux-su... [ 38s] [42/43] preinstalling nss... [ 38s] [43/43] preinstalling libsoftokn3... [ 40s] running qemu-linux-user-x86_64-cross postinstall script [ 40s] running qemu-accel-x86_64-armv7l postinstall script [ 41s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 41s] running setup postinstall script [ 41s] chroot: failed to run command '': No such file or directory [ 41s] initializing rpm db... [ 41s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 41s] breaking dependency libxcrypt-devel -> glibc-devel [ 41s] cycle: libsoftokn3 -> nss [ 41s] breaking dependency nss -> libsoftokn3 [ 41s] done [ 41s] querying package ids... [ 43s] [1/111] cumulate libmagic-data-5.46-1.7 [ 43s] [2/111] cumulate setup-0.9-1.2 [ 43s] [3/111] cumulate filesystem-3.1-1.1 [ 43s] [4/111] cumulate glibc-2.40-1.8 [ 43s] [5/111] cumulate libatomic-14.2.0-1.8 [ 43s] [6/111] cumulate libgcc-14.2.0-1.8 [ 43s] [7/111] cumulate bash-3.2.57-1.1 [ 43s] [8/111] cumulate cpio-2.8-2.1 [ 43s] [9/111] cumulate diffutils-3.10-1.1 [ 43s] [10/111] cumulate findutils-4.3.8-1.8 [ 43s] [11/111] cumulate gdbm-1.8.3-1.8 [ 43s] [12/111] cumulate hostname-3.23-1.1 [ 43s] [13/111] cumulate libattr-2.5.1-1.8 [ 43s] [14/111] cumulate libblkid-2.41.2-1.7 [ 43s] [15/111] cumulate libbz2-1.0.8-1.8 [ 43s] [16/111] cumulate libcap-2.73-1.7 [ 43s] [17/111] cumulate libexpat-2.7.3-1.8 [ 43s] [18/111] cumulate libffi-3.4.7-1.8 [ 43s] [19/111] cumulate libfreebl3-3.109-1.2 [ 43s] [20/111] cumulate libgfortran-14.2.0-1.8 [ 43s] [21/111] cumulate libgomp-14.2.0-1.8 [ 43s] [22/111] cumulate libitm-14.2.0-1.8 [ 43s] [23/111] cumulate libltdl-2.5.4-1.8 [ 43s] [24/111] cumulate liblua-5.1.5-1.7 [ 43s] [25/111] cumulate liblzma-5.8.1-1.2 [ 43s] [26/111] cumulate libopenssl3-3.0.18-1.8 [ 43s] [27/111] cumulate libpcre-8.45-1.8 [ 43s] [28/111] cumulate libpopt-1.16-1.6 [ 43s] [29/111] cumulate libpython3_131_0-3.13.1-1.8 [ 43s] [30/111] cumulate libsmack-1.3.1-1.6 [ 43s] [31/111] cumulate libsmartcols-2.41.2-1.7 [ 43s] [32/111] cumulate libsqlite-3.51.0-1.8 [ 43s] [33/111] cumulate libstdc++-14.2.0-1.8 [ 43s] [34/111] cumulate libuuid-2.41.2-1.7 [ 43s] [35/111] cumulate libxcrypt-4.4.36-1.8 [ 43s] [36/111] cumulate libxml2-2.13.5-1.8 [ 43s] [37/111] cumulate libzstd1-1.5.7-1.3 [ 43s] [38/111] cumulate m4-1.4.20-1.1 [ 43s] [39/111] cumulate net-tools-2.0_20121208git-1.7 [ 43s] [40/111] cumulate nspr-4.36-1.2 [ 43s] [41/111] cumulate patch-2.8-1.3 [ 43s] [42/111] cumulate pkg-config-0.29.2-1.8 [ 43s] [43/111] cumulate sed-4.1c-1.8 [ 43s] [44/111] cumulate update-alternatives-1.22.21-1.1 [ 43s] [45/111] cumulate which-2.17-1.1 [ 43s] [46/111] cumulate zlib-1.3.1-1.8 [ 43s] [47/111] cumulate build-compare-2023.06.18-1.2 [ 43s] [48/111] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 43s] [49/111] cumulate libstdc++-devel-14.2.0-1.8 [ 43s] [50/111] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-2.2 [ 43s] [51/111] cumulate cpp-14.2.0-1.8 [ 43s] [52/111] cumulate gcc-c++-14.2.0-1.8 [ 43s] [53/111] cumulate xz-devel-5.8.1-1.2 [ 43s] [54/111] cumulate binutils-libs-2.43-1.8 [ 43s] [55/111] cumulate coreutils-6.9-14.2 [ 43s] [56/111] cumulate gawk-3.1.5-1.1 [ 43s] [57/111] cumulate grep-2.5.2-1.7 [ 43s] [58/111] cumulate libacl-2.3.2-1.8 [ 43s] [59/111] cumulate libcc1-14.2.0-1.8 [ 43s] [60/111] cumulate libelf-0.189-1.8 [ 43s] [61/111] cumulate liblastlog2-2.41.2-1.7 [ 43s] [62/111] cumulate libmount-2.41.2-1.7 [ 43s] [63/111] cumulate make-4.4.1-1.8 [ 43s] [64/111] cumulate nss-certs-3.109-1.2 [ 43s] [65/111] cumulate smack-1.3.1-1.6 [ 43s] [66/111] cumulate bzip2-1.0.8-1.8 [ 43s] [67/111] cumulate libfdisk-2.41.2-1.7 [ 43s] [68/111] cumulate libmagic-5.46-1.7 [ 43s] [69/111] cumulate xz-5.8.1-1.2 [ 43s] [70/111] cumulate perl-5.38.0-1.8 [ 43s] [71/111] cumulate build-mkbaselibs-20120927-1.1 [ 43s] [72/111] cumulate linux-glibc-devel-6.6-1.8 [ 43s] [73/111] cumulate terminfo-base-full-6.4-1.8 [ 43s] [74/111] cumulate autoconf-2.71-1.8 [ 43s] [75/111] cumulate file-5.46-1.7 [ 43s] [76/111] cumulate glibc-locale-2.40-1.8 [ 43s] [77/111] cumulate tar-1.17-1.1 [ 43s] [78/111] cumulate binutils-2.43-1.8 [ 43s] [79/111] cumulate gzip-1.3.12-1.7 [ 43s] [80/111] cumulate pam-1.1.6-1.7 [ 43s] [81/111] cumulate tzdata-2025b-1.1 [ 43s] [82/111] cumulate libdw-0.189-1.8 [ 43s] [83/111] cumulate gcc-14.2.0-1.8 [ 43s] [84/111] cumulate libarchive-3.8.1-1.7 [ 43s] [85/111] cumulate qemu-accel-x86_64-armv7l-0.4-1.2 [ 43s] [86/111] cumulate automake-1.16.5-1.8 [ 43s] [87/111] cumulate libasm-0.189-1.8 [ 43s] [88/111] cumulate libncurses5-6.4-1.8 [ 43s] [89/111] cumulate libncurses6-6.4-1.8 [ 43s] [90/111] cumulate build-20120927-1.1 [ 43s] [91/111] cumulate rpm-4.14.1.1-1.7 [ 43s] [92/111] cumulate libncurses-6.4-1.8 [ 43s] [93/111] cumulate less-685-1.1 [ 43s] [94/111] cumulate libreadline-5.2-1.8 [ 43s] [95/111] cumulate libtool-2.5.4-1.8 [ 43s] [96/111] cumulate ncurses-devel-6.4-1.8 [ 43s] [97/111] cumulate elfutils-0.189-1.8 [ 43s] [98/111] cumulate readline-devel-5.2-1.8 [ 43s] [99/111] cumulate libxml2-tools-2.13.5-1.8 [ 43s] [100/111] cumulate python3-base-3.13.1-1.8 [ 43s] [101/111] cumulate util-linux-2.41.2-1.7 [ 43s] [102/111] cumulate python3-3.13.1-1.1 [ 43s] [103/111] cumulate util-linux-su-2.41.2-1.7 [ 43s] [104/111] cumulate python3-devel-3.13.1-1.8 [ 43s] [105/111] cumulate libxcrypt-devel-4.4.36-1.8 [ 43s] [106/111] cumulate nss-3.109-1.2 [ 43s] [107/111] cumulate glibc-devel-2.40-1.8 [ 43s] [108/111] cumulate libsoftokn3-3.109-1.2 [ 43s] [109/111] cumulate zlib-devel-1.3.1-1.8 [ 43s] [110/111] cumulate rpm-build-4.14.1.1-1.7 [ 43s] [111/111] cumulate libxml2-devel-2.13.5-1.8 [ 43s] now installing cumulated packages [ 46s] Preparing... ######################################## [ 46s] Updating / installing... [ 47s] setup-0.9-1.2 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 47s] ########################## [ 47s] filesystem-3.1-1.1 ######################################## [ 47s] libmagic-data-5.46-1.7 ######################################## [ 47s] glibc-2.40-1.8 ######################################## [ 48s] libgcc-14.2.0-1.8 ######################################## [ 48s] bash-3.2.57-1.1 ######################################## [ 48s] zlib-1.3.1-1.8 ######################################## [ 49s] coreutils-6.9-14.2 ######################################## [ 49s] libbz2-1.0.8-1.8 ######################################## [ 49s] liblzma-5.8.1-1.2 ######################################## [ 50s] libstdc++-14.2.0-1.8 ######################################## [ 50s] pkg-config-0.29.2-1.8 ######################################## [ 50s] libelf-0.189-1.8 ######################################## [ 51s] libdw-0.189-1.8 ######################################## [ 51s] libopenssl3-3.0.18-1.8 ######################################## [ 52s] libxcrypt-4.4.36-1.8 ######################################## [ 52s] libmagic-5.46-1.7 ######################################## [ 53s] libblkid-2.41.2-1.7 ######################################## [ 53s] libsqlite-3.51.0-1.8 ######################################## [ 54s] libxml2-2.13.5-1.8 ######################################## [ 54s] nspr-4.36-1.2 ######################################## [ 55s] terminfo-base-full-6.4-1.8 ######################################## [ 55s] libncurses6-6.4-1.8 ######################################## [ 55s] libreadline-5.2-1.8 ######################################## [ 56s] pam-1.1.6-1.7 ######################################## [ 56s] gdbm-1.8.3-1.8 ######################################## [ 60s] perl-5.38.0-1.8 ######################################## [ 60s] libcap-2.73-1.7 ######################################## [ 60s] libfreebl3-3.109-1.2 ######################################## [ 61s] liblua-5.1.5-1.7 ######################################## [ 61s] libpopt-1.16-1.6 ######################################## [ 62s] libpython3_131_0-3.13.1-1.8 ######################################## [ 62s] libuuid-2.41.2-1.7 ######################################## [ 63s] libzstd1-1.5.7-1.3 ######################################## [ 63s] build-mkbaselibs-20120927-1.1 ######################################## [ 63s] xz-devel-5.8.1-1.2 ######################################## [ 63s] linux-glibc-devel-6.6-1.8 ######################################## [ 63s] libxcrypt-devel-4.4.36-1.8 ######################################## [ 64s] glibc-devel-2.40-1.8 ######################################## [ 64s] zlib-devel-1.3.1-1.8 ######################################## [ 64s] libfdisk-2.41.2-1.7 ######################################## [ 64s] libxml2-tools-2.13.5-1.8 ######################################## [ 64s] libncurses5-6.4-1.8 ######################################## [ 65s] ncurses-devel-6.4-1.8 ######################################## [ 65s] readline-devel-5.2-1.8 ######################################## [ 65s] nss-certs-3.109-1.2 ######################################## [ 65s] libsoftokn3-3.109-1.2 ######################################## [ 65s] nss-3.109-1.2 ######################################## [ 66s] liblastlog2-2.41.2-1.7 ######################################## [ 66s] libmount-2.41.2-1.7 ######################################## [ 66s] libasm-0.189-1.8 ######################################## [ 66s] libcc1-14.2.0-1.8 ######################################## [ 66s] xz-5.8.1-1.2 ######################################## [ 66s] bzip2-1.0.8-1.8 ######################################## [ 66s] gzip-1.3.12-1.7 ######################################## [ 66s] binutils-libs-2.43-1.8 ######################################## [ 67s] binutils-2.43-1.8 ######################################## [ 67s] make-4.4.1-1.8 ######################################## [ 67s] findutils-4.3.8-1.8 ######################################## [ 67s] libattr-2.5.1-1.8 ######################################## [ 67s] libacl-2.3.2-1.8 ######################################## [ 68s] tar-1.17-1.1 ######################################## [ 68s] libarchive-3.8.1-1.7 ######################################## [ 69s] rpm-4.14.1.1-1.7 ######################################## [ 69s] libexpat-2.7.3-1.8 ######################################## [ 70s] libffi-3.4.7-1.8 ######################################## [ 71s] python3-base-3.13.1-1.8 ######################################## [ 71s] libgfortran-14.2.0-1.8 ######################################## [ 72s] libgomp-14.2.0-1.8 ######################################## [ 72s] libitm-14.2.0-1.8 ######################################## [ 73s] libltdl-2.5.4-1.8 ######################################## [ 73s] libpcre-8.45-1.8 ######################################## [ 74s] libsmack-1.3.1-1.6 ######################################## [ 74s] libsmartcols-2.41.2-1.7 ######################################## [ 75s] m4-1.4.20-1.1 ######################################## [ 75s] autoconf-2.71-1.8 ######################################## [ 75s] automake-1.16.5-1.8 ######################################## [ 75s] patch-2.8-1.3 ######################################## [ 75s] sed-4.1c-1.8 ######################################## [ 76s] util-linux-2.41.2-1.7 ######################################## [ 76s] libatomic-14.2.0-1.8 ######################################## [ 76s] libtool-2.5.4-1.8 ######################################## [ 77s] python3-3.13.1-1.1 ######################################## [ 77s] build-20120927-1.1 ######################################## [ 77s] libxml2-devel-2.13.5-1.8 ######################################## [ 77s] libncurses-6.4-1.8 ######################################## [ 78s] libstdc++-devel-14.2.0-1.8 ######################################## [ 78s] build-compare-2023.06.18-1.2 ######################################## [ 78s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 84s] qemu-linux-user-x86_64-cross-9.2.3.1-2######################################## [ 86s] gcc-14.2.0-1.8 ######################################## [ 98s] qemu-accel-x86_64-armv7l-0.4-1.2 ######################################## [ 99s] util-linux-su-2.41.2-1.7 ######################################## [ 99s] rpm-build-4.14.1.1-1.7 ######################################## [ 99s] smack-1.3.1-1.6 ######################################## [ 99s] grep-2.5.2-1.7 ######################################## [ 99s] python3-devel-3.13.1-1.8 ######################################## [ 99s] elfutils-0.189-1.8 ######################################## [ 99s] less-685-1.1 ######################################## [ 99s] file-5.46-1.7 ######################################## [ 99s] glibc-locale-2.40-1.8 ######################################## [ 100s] tzdata-2025b-1.1 ######################################## [ 101s] cpp-14.2.0-1.8 ######################################## [ 101s] gcc-c++-14.2.0-1.8 ######################################## [ 101s] gawk-3.1.5-1.1 ######################################## [ 101s] cpio-2.8-2.1 ######################################## [ 101s] diffutils-3.10-1.1 ######################################## [ 101s] hostname-3.23-1.1 ######################################## [ 101s] net-tools-2.0_20121208git-1.7 ######################################## [ 101s] update-alternatives-1.22.21-1.1 ######################################## [ 101s] which-2.17-1.1 ######################################## [ 103s] now finalizing build dir... [ 106s] ----------------------------------------------------------------- [ 106s] I have the following modifications for python3-libxml2.spec: [ 106s] 4c4 [ 106s] < Release: 0 [ 106s] --- [ 106s] > Release: 1.2 [ 107s] build target is armv7l-tizen-linux [ 107s] ----------------------------------------------------------------- [ 107s] ----- building python3-libxml2.spec (user abuild) [ 107s] ----------------------------------------------------------------- [ 107s] ----------------------------------------------------------------- [ 107s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Dev/standard/970d2d0bbdce2b433057d5956cb9196e-python3-libxml2' /home/abuild/rpmbuild/SOURCES/python3-libxml2.spec [ 107s] Building target platforms: armv7l-tizen-linux [ 107s] Building for target armv7l-tizen-linux [ 107s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.lTwl3r [ 107s] + umask 022 [ 107s] + cd /home/abuild/rpmbuild/BUILD [ 107s] + cd /home/abuild/rpmbuild/BUILD [ 107s] + rm -rf python3-libxml2-2.13.5 [ 107s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python3-libxml2-2.13.5.tar.gz [ 107s] + /bin/tar -xof - [ 108s] + STATUS=0 [ 108s] + '[' 0 -ne 0 ']' [ 108s] + cd python3-libxml2-2.13.5 [ 108s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 108s] + echo 'Patch #0 (0001-Bump-to-2.13.5.patch):' [ 108s] Patch #0 (0001-Bump-to-2.13.5.patch): [ 108s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 108s] patching file .gitignore [ 108s] + cp /home/abuild/rpmbuild/SOURCES/python3-libxml2.manifest . [ 108s] + exit 0 [ 108s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.QemukB [ 108s] + umask 022 [ 108s] + cd /home/abuild/rpmbuild/BUILD [ 108s] + CFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 108s] + export CFLAGS [ 108s] + CXXFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 108s] + export CXXFLAGS [ 108s] + LDFLAGS= [ 108s] + export LDFLAGS [ 108s] + cd python3-libxml2-2.13.5 [ 108s] + ref=/usr/lib/rpm [ 108s] + mints=0 [ 108s] + case $(uname -m) in [ 108s] ++ uname -m [ 108s] + for s in guess sub [ 108s] ++ find -maxdepth 8 -name config.guess [ 108s] + for s in guess sub [ 108s] ++ find -maxdepth 8 -name config.sub [ 108s] + export 'CFLAGS=-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fno-strict-aliasing' [ 108s] + CFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fno-strict-aliasing' [ 108s] + export PYTHON=/usr/bin/python3 [ 108s] + PYTHON=/usr/bin/python3 [ 108s] + CFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fno-strict-aliasing' [ 108s] + export CFLAGS [ 108s] + CXXFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 108s] + export CXXFLAGS [ 108s] + LDFLAGS= [ 108s] + export LDFLAGS [ 108s] + ./autogen.sh --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 134s] libtoolize: putting auxiliary files in '.'. [ 134s] libtoolize: copying file './ltmain.sh' [ 134s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 134s] libtoolize: copying file 'm4/libtool.m4' [ 135s] libtoolize: copying file 'm4/ltoptions.m4' [ 135s] libtoolize: copying file 'm4/ltsugar.m4' [ 136s] libtoolize: copying file 'm4/ltversion.m4' [ 136s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 167s] configure.ac:47: installing './compile' [ 167s] configure.ac:12: installing './config.guess' [ 167s] configure.ac:12: installing './config.sub' [ 167s] configure.ac:42: installing './install-sh' [ 167s] configure.ac:42: installing './missing' [ 168s] Makefile.am: installing './depcomp' [ 172s] python/Makefile.am:31: installing './py-compile' [ 175s] checking build system type... armv7l-tizen-linux-gnueabi [ 175s] checking host system type... armv7l-tizen-linux-gnueabi [ 176s] checking for a BSD-compatible install... /bin/install -c [ 176s] checking whether build environment is sane... yes [ 176s] checking for a race-free mkdir -p... /bin/mkdir -p [ 176s] checking for gawk... gawk [ 176s] checking whether make sets $(MAKE)... yes [ 176s] checking whether make supports nested variables... yes [ 176s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 176s] checking whether make supports nested variables... (cached) yes [ 176s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 177s] checking whether the C compiler works... yes [ 177s] checking for C compiler default output file name... a.out [ 177s] checking for suffix of executables... [ 177s] checking whether we are cross compiling... no [ 177s] checking for suffix of object files... o [ 177s] checking whether the compiler supports GNU C... yes [ 178s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 178s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 178s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 178s] checking whether make supports the include directive... yes (GNU style) [ 178s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 178s] checking whether ln -s works... yes [ 178s] checking for tar... /bin/tar [ 178s] checking for perl... /bin/perl [ 178s] checking for wget... /usr/bin/wget [ 178s] checking for xsltproc... /usr/bin/xsltproc [ 178s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 178s] checking pkg-config is at least version 0.9.0... yes [ 179s] checking how to print strings... printf [ 179s] checking for a sed that does not truncate output... /bin/sed [ 179s] checking for grep that handles long lines and -e... /bin/grep [ 179s] checking for egrep... /bin/grep -E [ 179s] checking for fgrep... /bin/grep -F [ 179s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 179s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 179s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 179s] checking the name lister (/bin/nm -B) interface... BSD nm [ 179s] checking the maximum length of command line arguments... 1572864 [ 179s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 179s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 179s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 179s] checking for file... file [ 179s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 179s] checking for objdump... objdump [ 179s] checking how to recognize dependent libraries... pass_all [ 179s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 179s] checking for dlltool... no [ 179s] checking how to associate runtime and link libraries... printf %s\n [ 179s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 179s] checking for ranlib... ranlib [ 179s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 179s] checking for ar... ar [ 180s] checking for archiver @FILE support... @ [ 180s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 180s] checking for strip... strip [ 180s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 180s] checking for sysroot... no [ 180s] checking for a working dd... /bin/dd [ 180s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 180s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 180s] checking for mt... no [ 180s] checking if : is a manifest tool... no [ 180s] checking for stdio.h... yes [ 181s] checking for stdlib.h... yes [ 181s] checking for string.h... yes [ 181s] checking for inttypes.h... yes [ 181s] checking for stdint.h... yes [ 181s] checking for strings.h... yes [ 181s] checking for sys/stat.h... yes [ 182s] checking for sys/types.h... yes [ 182s] checking for unistd.h... yes [ 182s] checking for dlfcn.h... yes [ 182s] checking for objdir... .libs [ 183s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 183s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 183s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 183s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 183s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 183s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 183s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 184s] checking whether -lc should be explicitly linked in... no [ 184s] checking dynamic linker characteristics... GNU/Linux ld.so [ 184s] checking how to hardcode library paths into programs... immediate [ 184s] checking whether stripping libraries is possible... yes [ 184s] checking if libtool supports shared libraries... yes [ 184s] checking whether to build shared libraries... yes [ 184s] checking whether to build static libraries... no [ 184s] checking for cos in -lm... yes [ 184s] checking for stdint.h... (cached) yes [ 184s] checking for fcntl.h... yes [ 184s] checking for unistd.h... (cached) yes [ 184s] checking for sys/stat.h... (cached) yes [ 184s] checking for sys/mman.h... yes [ 185s] checking for sys/time.h... yes [ 185s] checking for sys/timeb.h... yes [ 185s] checking for sys/random.h... yes [ 185s] checking for dl.h... no [ 185s] checking for dlfcn.h... (cached) yes [ 185s] checking for glob.h... yes [ 185s] checking for gettimeofday... yes [ 185s] checking for ftime... yes [ 186s] checking for stat... yes [ 186s] checking for mmap... yes [ 186s] checking for munmap... yes [ 186s] checking for armv7l-tizen-linux-gnueabi-gcc options needed to detect all undeclared functions... none needed [ 186s] checking whether getentropy is declared... yes [ 187s] checking whether __attribute__((destructor)) is accepted... yes [ 187s] checking whether the linker accepts -Wl,--undefined-version... yes [ 187s] checking for python version... 3.13 [ 188s] checking for python platform... linux [ 188s] checking for GNU default python prefix... ${prefix} [ 188s] checking for GNU default python exec_prefix... ${exec_prefix} [ 189s] checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.13/site-packages [ 190s] checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.13/site-packages [ 190s] checking for python-3.13... yes [ 190s] checking for library containing dlopen... none required [ 190s] checking for pthread.h... yes [ 191s] checking for library containing pthread_create... none required [ 191s] checking for libiconv... none required [ 191s] checking that generated files are newer than configure... done [ 191s] configure: creating ./config.status [ 199s] config.status: creating Makefile [ 199s] config.status: creating include/Makefile [ 200s] config.status: creating include/libxml/Makefile [ 200s] config.status: creating include/private/Makefile [ 200s] config.status: creating doc/Makefile [ 201s] config.status: creating doc/devhelp/Makefile [ 201s] config.status: creating example/Makefile [ 201s] config.status: creating fuzz/Makefile [ 202s] config.status: creating python/Makefile [ 202s] config.status: creating python/tests/Makefile [ 202s] config.status: creating xstc/Makefile [ 203s] config.status: creating include/libxml/xmlversion.h [ 203s] config.status: creating libxml-2.0.pc [ 203s] config.status: creating libxml-2.0-uninstalled.pc [ 204s] config.status: creating libxml2-config.cmake [ 204s] config.status: creating python/setup.py [ 204s] config.status: creating xml2-config [ 205s] config.status: creating config.h [ 205s] config.status: executing depfiles commands [ 212s] config.status: executing libtool commands [ 213s] [ 213s] Now type 'make' to compile libxml2. [ 213s] + CFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fno-strict-aliasing' [ 213s] + export CFLAGS [ 213s] + CXXFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 213s] + export CXXFLAGS [ 213s] + LDFLAGS= [ 213s] + export LDFLAGS [ 213s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-fexceptions --with-history --enable-ipv6 --with-sax1 --with-regexps --with-threads --with-reader --with-http [ 215s] configure: WARNING: unrecognized options: --with-fexceptions [ 216s] checking build system type... armv7l-tizen-linux-gnueabi [ 216s] checking host system type... armv7l-tizen-linux-gnueabi [ 216s] checking for a BSD-compatible install... /bin/install -c [ 217s] checking whether build environment is sane... yes [ 217s] checking for a race-free mkdir -p... /bin/mkdir -p [ 217s] checking for gawk... gawk [ 217s] checking whether make sets $(MAKE)... yes [ 217s] checking whether make supports nested variables... yes [ 217s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 217s] checking whether make supports nested variables... (cached) yes [ 217s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 218s] checking whether the C compiler works... yes [ 218s] checking for C compiler default output file name... a.out [ 218s] checking for suffix of executables... [ 219s] checking whether we are cross compiling... no [ 219s] checking for suffix of object files... o [ 219s] checking whether the compiler supports GNU C... yes [ 219s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 219s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 220s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 220s] checking whether make supports the include directive... yes (GNU style) [ 220s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 220s] checking whether ln -s works... yes [ 220s] checking for tar... /bin/tar [ 220s] checking for perl... /bin/perl [ 220s] checking for wget... /usr/bin/wget [ 220s] checking for xsltproc... /usr/bin/xsltproc [ 220s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 220s] checking pkg-config is at least version 0.9.0... yes [ 220s] checking how to print strings... printf [ 220s] checking for a sed that does not truncate output... /bin/sed [ 220s] checking for grep that handles long lines and -e... /bin/grep [ 220s] checking for egrep... /bin/grep -E [ 220s] checking for fgrep... /bin/grep -F [ 221s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 221s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 221s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 221s] checking the name lister (/bin/nm -B) interface... BSD nm [ 221s] checking the maximum length of command line arguments... 1572864 [ 221s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 221s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 221s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 221s] checking for file... file [ 221s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 221s] checking for objdump... objdump [ 221s] checking how to recognize dependent libraries... pass_all [ 221s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 221s] checking for dlltool... no [ 221s] checking how to associate runtime and link libraries... printf %s\n [ 221s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 221s] checking for ranlib... ranlib [ 221s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 221s] checking for ar... ar [ 222s] checking for archiver @FILE support... @ [ 222s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 222s] checking for strip... strip [ 222s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 222s] checking for sysroot... no [ 222s] checking for a working dd... /bin/dd [ 223s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 223s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 223s] checking for mt... no [ 223s] checking if : is a manifest tool... no [ 223s] checking for stdio.h... yes [ 223s] checking for stdlib.h... yes [ 223s] checking for string.h... yes [ 223s] checking for inttypes.h... yes [ 224s] checking for stdint.h... yes [ 224s] checking for strings.h... yes [ 224s] checking for sys/stat.h... yes [ 224s] checking for sys/types.h... yes [ 224s] checking for unistd.h... yes [ 225s] checking for dlfcn.h... yes [ 225s] checking for objdir... .libs [ 225s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 225s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 225s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 226s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 226s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 226s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 226s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 226s] checking whether -lc should be explicitly linked in... no [ 227s] checking dynamic linker characteristics... GNU/Linux ld.so [ 227s] checking how to hardcode library paths into programs... immediate [ 227s] checking whether stripping libraries is possible... yes [ 227s] checking if libtool supports shared libraries... yes [ 227s] checking whether to build shared libraries... yes [ 227s] checking whether to build static libraries... no [ 227s] checking for cos in -lm... yes [ 227s] checking for stdint.h... (cached) yes [ 228s] checking for fcntl.h... yes [ 228s] checking for unistd.h... (cached) yes [ 228s] checking for sys/stat.h... (cached) yes [ 228s] checking for sys/mman.h... yes [ 228s] checking for sys/time.h... yes [ 228s] checking for sys/timeb.h... yes [ 228s] checking for sys/random.h... yes [ 229s] checking for dl.h... no [ 229s] checking for dlfcn.h... (cached) yes [ 229s] checking for glob.h... yes [ 229s] checking for gettimeofday... yes [ 229s] checking for ftime... yes [ 230s] checking for stat... yes [ 230s] checking for mmap... yes [ 230s] checking for munmap... yes [ 231s] checking for armv7l-tizen-linux-gnueabi-gcc options needed to detect all undeclared functions... none needed [ 231s] checking whether getentropy is declared... yes [ 231s] checking for sys/socket.h... yes [ 231s] checking for netinet/in.h... yes [ 231s] checking for arpa/inet.h... yes [ 232s] checking for netdb.h... yes [ 232s] checking for sys/select.h... yes [ 232s] checking for poll.h... yes [ 232s] checking for library containing gethostbyname... none required [ 233s] checking for library containing connect... none required [ 233s] checking for type of socket length (socklen_t)... socklen_t * [ 233s] checking whether to enable IPv6... yes [ 233s] checking whether __attribute__((destructor)) is accepted... yes [ 234s] checking whether the linker accepts -Wl,--undefined-version... yes [ 234s] Enabling HTTP support [ 235s] checking for python version... 3.13 [ 236s] checking for python platform... linux [ 236s] checking for GNU default python prefix... ${prefix} [ 236s] checking for GNU default python exec_prefix... ${exec_prefix} [ 237s] checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.13/site-packages [ 238s] checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.13/site-packages [ 238s] checking for python-3.13... yes [ 238s] checking for library containing dlopen... none required [ 239s] checking for pthread.h... yes [ 239s] checking for library containing pthread_create... none required [ 239s] Enabling xmllint shell history [ 239s] checking for tputs in -lncurses... no [ 240s] checking for tputs in -lcurses... no [ 240s] checking for tputs in -ltermcap... no [ 240s] checking for tputs in -lterminfo... no [ 241s] checking for tputs in -ltermlib... no [ 241s] checking for readline/history.h... yes [ 241s] checking for append_history in -lhistory... yes [ 241s] checking for readline/readline.h... yes [ 242s] checking for readline in -lreadline... yes [ 242s] checking for libiconv... none required [ 242s] checking that generated files are newer than configure... done [ 242s] configure: creating ./config.status [ 251s] config.status: creating Makefile [ 251s] config.status: creating include/Makefile [ 251s] config.status: creating include/libxml/Makefile [ 252s] config.status: creating include/private/Makefile [ 252s] config.status: creating doc/Makefile [ 252s] config.status: creating doc/devhelp/Makefile [ 252s] config.status: creating example/Makefile [ 253s] config.status: creating fuzz/Makefile [ 253s] config.status: creating python/Makefile [ 253s] config.status: creating python/tests/Makefile [ 254s] config.status: creating xstc/Makefile [ 254s] config.status: creating include/libxml/xmlversion.h [ 254s] config.status: creating libxml-2.0.pc [ 255s] config.status: creating libxml-2.0-uninstalled.pc [ 255s] config.status: creating libxml2-config.cmake [ 255s] config.status: creating python/setup.py [ 255s] config.status: creating xml2-config [ 256s] config.status: creating config.h [ 256s] config.status: executing depfiles commands [ 258s] config.status: executing libtool commands [ 258s] configure: WARNING: unrecognized options: --with-fexceptions [ 258s] + mkdir .libs [ 258s] + cp -v /usr/lib/libxml2.la . [ 259s] `/usr/lib/libxml2.la' -> `./libxml2.la' [ 259s] + make -C python -j12 [ 259s] make: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 259s] /usr/bin/python3 ./generator.py . [ 264s] Found 1644 functions in libxml2-api.xml [ 264s] Found 53 functions in libxml2-python-api.xml [ 264s] Generated 894 wrapper functions, 593 failed, 210 skipped [ 265s] make all-recursive [ 265s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 265s] Making all in . [ 265s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 265s] CC libxml.lo [ 266s] In file included from /usr/include/python3.13/Python.h:63, [ 266s] from libxml.c:15: [ 266s] /usr/include/python3.13/cpython/floatobject.h: In function 'PyFloat_AS_DOUBLE': [ 266s] /usr/include/python3.13/pyport.h:19:31: warning: cast increases required alignment of target type [-Wcast-align] [ 266s] 19 | #define _Py_CAST(type, expr) ((type)(expr)) [ 266s] | ^ [ 266s] /usr/include/python3.13/cpython/floatobject.h:11:33: note: in expansion of macro '_Py_CAST' [ 266s] 11 | (assert(PyFloat_Check(op)), _Py_CAST(PyFloatObject*, op)) [ 266s] | ^~~~~~~~ [ 266s] /usr/include/python3.13/cpython/floatobject.h:16:12: note: in expansion of macro '_PyFloat_CAST' [ 266s] 16 | return _PyFloat_CAST(op)->ob_fval; [ 266s] | ^~~~~~~~~~~~~ [ 266s] /usr/include/python3.13/cpython/dictobject.h: In function 'PyDict_GET_SIZE': [ 266s] /usr/include/python3.13/pyport.h:19:31: warning: cast increases required alignment of target type [-Wcast-align] [ 266s] 19 | #define _Py_CAST(type, expr) ((type)(expr)) [ 266s] | ^ [ 266s] /usr/include/python3.13/cpython/dictobject.h:58:10: note: in expansion of macro '_Py_CAST' [ 266s] 58 | mp = _Py_CAST(PyDictObject*, op); [ 266s] | ^~~~~~~~ [ 267s] CC types.lo [ 268s] In file included from /usr/include/python3.13/Python.h:63, [ 268s] from libxml_wrap.h:1, [ 268s] from types.c:9: [ 268s] /usr/include/python3.13/cpython/floatobject.h: In function 'PyFloat_AS_DOUBLE': [ 268s] /usr/include/python3.13/pyport.h:19:31: warning: cast increases required alignment of target type [-Wcast-align] [ 268s] 19 | #define _Py_CAST(type, expr) ((type)(expr)) [ 268s] | ^ [ 268s] /usr/include/python3.13/cpython/floatobject.h:11:33: note: in expansion of macro '_Py_CAST' [ 268s] 11 | (assert(PyFloat_Check(op)), _Py_CAST(PyFloatObject*, op)) [ 268s] | ^~~~~~~~ [ 268s] /usr/include/python3.13/cpython/floatobject.h:16:12: note: in expansion of macro '_PyFloat_CAST' [ 268s] 16 | return _PyFloat_CAST(op)->ob_fval; [ 268s] | ^~~~~~~~~~~~~ [ 268s] /usr/include/python3.13/cpython/dictobject.h: In function 'PyDict_GET_SIZE': [ 268s] /usr/include/python3.13/pyport.h:19:31: warning: cast increases required alignment of target type [-Wcast-align] [ 268s] 19 | #define _Py_CAST(type, expr) ((type)(expr)) [ 268s] | ^ [ 268s] /usr/include/python3.13/cpython/dictobject.h:58:10: note: in expansion of macro '_Py_CAST' [ 268s] 58 | mp = _Py_CAST(PyDictObject*, op); [ 268s] | ^~~~~~~~ [ 268s] CC libxml2-py.lo [ 268s] In file included from /usr/include/python3.13/Python.h:63, [ 268s] from libxml2-py.c:4: [ 268s] /usr/include/python3.13/cpython/floatobject.h: In function 'PyFloat_AS_DOUBLE': [ 268s] /usr/include/python3.13/pyport.h:19:31: warning: cast increases required alignment of target type [-Wcast-align] [ 268s] 19 | #define _Py_CAST(type, expr) ((type)(expr)) [ 268s] | ^ [ 268s] /usr/include/python3.13/cpython/floatobject.h:11:33: note: in expansion of macro '_Py_CAST' [ 268s] 11 | (assert(PyFloat_Check(op)), _Py_CAST(PyFloatObject*, op)) [ 268s] | ^~~~~~~~ [ 268s] /usr/include/python3.13/cpython/floatobject.h:16:12: note: in expansion of macro '_PyFloat_CAST' [ 268s] 16 | return _PyFloat_CAST(op)->ob_fval; [ 268s] | ^~~~~~~~~~~~~ [ 268s] /usr/include/python3.13/cpython/dictobject.h: In function 'PyDict_GET_SIZE': [ 268s] /usr/include/python3.13/pyport.h:19:31: warning: cast increases required alignment of target type [-Wcast-align] [ 268s] 19 | #define _Py_CAST(type, expr) ((type)(expr)) [ 268s] | ^ [ 268s] /usr/include/python3.13/cpython/dictobject.h:58:10: note: in expansion of macro '_Py_CAST' [ 268s] 58 | mp = _Py_CAST(PyDictObject*, op); [ 268s] | ^~~~~~~~ [ 276s] CCLD libxml2mod.la [ 277s] cat ./libxml.py `test -f libxml2class.py || echo ./`libxml2class.py > libxml2.py [ 277s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 277s] Making all in tests [ 277s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 277s] make[2]: Nothing to be done for 'all'. [ 277s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 277s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 277s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 277s] + exit 0 [ 277s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.LSo4Ju [ 277s] + umask 022 [ 277s] + cd /home/abuild/rpmbuild/BUILD [ 277s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm [ 277s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm [ 277s] + cd python3-libxml2-2.13.5 [ 277s] + make -C python install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm pythondir=/usr/lib/python3.13/site-packages PYTHON_SITE_PACKAGES=/usr/lib/python3.13/site-packages [ 277s] make: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 277s] make install-recursive [ 277s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 277s] Making install in . [ 277s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 277s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 277s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/lib/python3.13/site-packages' [ 277s] /bin/sh ../libtool --mode=install /bin/install -c libxml2mod.la '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/lib/python3.13/site-packages' [ 277s] libtool: install: /bin/install -c .libs/libxml2mod.so /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/lib/python3.13/site-packages/libxml2mod.so [ 278s] libtool: install: /bin/install -c .libs/libxml2mod.lai /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/lib/python3.13/site-packages/libxml2mod.la [ 278s] libtool: warning: remember to run 'libtool --finish /usr/lib/python3.13/site-packages' [ 278s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/lib/python3.13/site-packages' [ 278s] /bin/install -c -m 644 libxml2.py '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/lib/python3.13/site-packages' [ 278s] Byte-compiling python modules... [ 280s] libxml2.py [ 281s] Byte-compiling python modules (optimized versions) ... [ 283s] libxml2.py [ 283s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/lib/python3.13/site-packages' [ 283s] /bin/install -c -m 644 drv_libxml2.py '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/lib/python3.13/site-packages' [ 284s] Byte-compiling python modules... [ 284s] drv_libxml2.py [ 285s] Byte-compiling python modules (optimized versions) ... [ 285s] drv_libxml2.py [ 285s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 285s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 285s] Making install in tests [ 285s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 285s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 285s] make[3]: Nothing to be done for 'install-exec-am'. [ 285s] make[3]: Nothing to be done for 'install-data-am'. [ 285s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 285s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 285s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 285s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 285s] + chmod a-x python/tests/attribs.py python/tests/build.py python/tests/compareNodes.py python/tests/ctxterror.py python/tests/cutnpaste.py python/tests/dtdvalid.py python/tests/error.py python/tests/inbuf.py python/tests/indexes.py python/tests/input_callback.py python/tests/nsdel.py python/tests/outbuf.py python/tests/push.py python/tests/pushSAX.py python/tests/pushSAXhtml.py python/tests/reader.py python/tests/reader2.py python/tests/reader3.py python/tests/reader4.py python/tests/reader5.py python/tests/reader6.py python/tests/reader7.py python/tests/reader8.py python/tests/readererr.py python/tests/readernext.py python/tests/regexp.py python/tests/relaxng.py python/tests/resolver.py python/tests/schema.py python/tests/serialize.py python/tests/setup_test.py python/tests/sync.py python/tests/thread2.py python/tests/tst.py python/tests/tstLastError.py python/tests/tstURI.py python/tests/tstmem.py python/tests/tstxpath.py python/tests/validDTD.py python/tests/validRNG.py python/tests/validSchemas.py python/tests/validate.py python/tests/walker.py python/tests/xpath.py python/tests/xpathext.py python/tests/xpathleak.py python/tests/xpathns.py python/tests/xpathret.py [ 285s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/share/doc [ 285s] + rm -f /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/lib/python3.13/site-packages/libxml2mod.la '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/lib/python3.13/site-packages/*.a' [ 285s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.13.5-1.2 --unique-debug-src-base python3-libxml2-2.13.5-1.2.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 286s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/lib/python3.13/site-packages/libxml2mod.so [ 286s] 2127 blocks [ 286s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python3-libxml2-debuginfo.manifest [ 286s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python3-libxml2-debugsource.manifest [ 286s] + /usr/lib/rpm/check-buildroot [ 286s] + /usr/lib/rpm//brp-compress [ 286s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 287s] + /usr/lib/rpm/brp-python-hardlink [ 287s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm [ 288s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/isu.list [ 288s] ~/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm ~/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 288s] ~/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 288s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 289s] Processing files: python3-libxml2-2.13.5-1.2.armv7l [ 289s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 289s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 289s] [ 289s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.TKhVdY [ 289s] + umask 022 [ 289s] + cd /home/abuild/rpmbuild/BUILD [ 289s] + cd python3-libxml2-2.13.5 [ 289s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/share/doc/packages/python3-libxml2 [ 289s] + export LC_ALL=C [ 289s] + LC_ALL=C [ 289s] + export DOCDIR [ 289s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/share/doc/packages/python3-libxml2 [ 289s] + cp -pr python/libxml2class.txt /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/share/doc/packages/python3-libxml2 [ 289s] + cp -pr python/tests /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/share/doc/packages/python3-libxml2 [ 289s] + exit 0 [ 289s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.tvg6az [ 289s] + umask 022 [ 289s] + cd /home/abuild/rpmbuild/BUILD [ 289s] + cd python3-libxml2-2.13.5 [ 289s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/share/licenses/python3-libxml2 [ 289s] + export LC_ALL=C [ 289s] + LC_ALL=C [ 289s] + export LICENSEDIR [ 289s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/share/licenses/python3-libxml2 [ 289s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm/usr/share/licenses/python3-libxml2 [ 289s] + exit 0 [ 290s] warning: File listed twice: /usr/lib/python3.13/site-packages/libxml2mod.so [ 290s] Provides: libxml2-python3 = 2.13.5 libxml2mod.so python3-libxml2 = 2.13.5-1.2 python3-libxml2(armv7l-32) = 2.13.5-1.2 [ 290s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 290s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.28) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.5.0) libxml2.so.2(LIBXML2_2.5.2) libxml2.so.2(LIBXML2_2.5.4) libxml2.so.2(LIBXML2_2.5.6) libxml2.so.2(LIBXML2_2.5.7) libxml2.so.2(LIBXML2_2.5.8) libxml2.so.2(LIBXML2_2.5.9) libxml2.so.2(LIBXML2_2.6.0) libxml2.so.2(LIBXML2_2.6.1) libxml2.so.2(LIBXML2_2.6.10) libxml2.so.2(LIBXML2_2.6.11) libxml2.so.2(LIBXML2_2.6.12) libxml2.so.2(LIBXML2_2.6.14) libxml2.so.2(LIBXML2_2.6.15) libxml2.so.2(LIBXML2_2.6.16) libxml2.so.2(LIBXML2_2.6.17) libxml2.so.2(LIBXML2_2.6.18) libxml2.so.2(LIBXML2_2.6.2) libxml2.so.2(LIBXML2_2.6.20) libxml2.so.2(LIBXML2_2.6.21) libxml2.so.2(LIBXML2_2.6.23) libxml2.so.2(LIBXML2_2.6.25) libxml2.so.2(LIBXML2_2.6.27) libxml2.so.2(LIBXML2_2.6.28) libxml2.so.2(LIBXML2_2.6.3) libxml2.so.2(LIBXML2_2.6.5) libxml2.so.2(LIBXML2_2.6.6) libxml2.so.2(LIBXML2_2.6.8) libxml2.so.2(LIBXML2_2.7.0) libxml2.so.2(LIBXML2_2.7.3) libxml2.so.2(LIBXML2_2.8.0) libxml2.so.2(LIBXML2_2.9.0) libxml2.so.2(LIBXML2_2.9.1) libxml2.so.2(LIBXML2_2.9.11) rtld(GNU_HASH) [ 290s] Obsoletes: libxml2-python3 < 2.13.5 [ 290s] Processing files: python3-libxml2-debugsource-2.13.5-1.2.armv7l [ 290s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 290s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 290s] [ 290s] Provides: python3-libxml2-debugsource = 2.13.5-1.2 python3-libxml2-debugsource(armv7l-32) = 2.13.5-1.2 [ 290s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 290s] Processing files: python3-libxml2-debuginfo-2.13.5-1.2.armv7l [ 290s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 290s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 290s] [ 290s] Provides: python3-libxml2-debuginfo = 2.13.5-1.2 python3-libxml2-debuginfo(armv7l-32) = 2.13.5-1.2 [ 290s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 290s] Recommends: python3-libxml2-debugsource(armv7l-32) = 2.13.5-1.2 [ 290s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm [ 290s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-libxml2-2.13.5-1.2.src.rpm [ 291s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python3-libxml2-2.13.5-1.2.armv7l.rpm [ 291s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python3-libxml2-debugsource-2.13.5-1.2.armv7l.rpm [ 292s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python3-libxml2-debuginfo-2.13.5-1.2.armv7l.rpm [ 292s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.kmxGA6 [ 292s] + umask 022 [ 292s] + cd /home/abuild/rpmbuild/BUILD [ 292s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm [ 292s] + cd python3-libxml2-2.13.5 [ 292s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.2.arm [ 292s] + exit 0 [ 292s] ... checking for files with abuild user/group [ 292s] ... creating baselibs [ 294s] ... comparing built packages with the former built [ 294s] /usr/lib/build/pkg-diff.sh [ 294s] compare /.build.oldpackages/python3-libxml2-2.13.5-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/python3-libxml2-2.13.5-1.2.src.rpm [ 294s] This is not a prerelease project. Compare the project name. [ 294s] comparing disturl_distribution [ 294s] comparing the rpm tags of python3-libxml2 [ 294s] --- old-rpm-tags [ 294s] +++ new-rpm-tags [ 294s] @@ -90 +90 @@ [ 294s] -python3-libxml2.spec 3da2d4d47c1f6aebba63717292d805289ed970ca76d2c03d63f8355884379210 32 [ 294s] +python3-libxml2.spec 976e501296648080da29241d0e3d82b8ad50627bc0bcdd7302d12827377ec6c5 32 [ 294s] comparing rpmtags [ 294s] comparing RELEASE [ 294s] comparing PROVIDES [ 294s] comparing scripts [ 294s] comparing filelist [ 294s] comparing file checksum [ 295s] compare /.build.oldpackages/python3-libxml2-2.13.5-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python3-libxml2-2.13.5-1.2.armv7l.rpm [ 296s] Comparing python3-libxml2-2.13.5-1.1.armv7l.rpm to python3-libxml2-2.13.5-1.2.armv7l.rpm [ 296s] This is not a prerelease project. Compare the project name. [ 296s] comparing disturl_distribution [ 296s] comparing the rpm tags of python3-libxml2 [ 296s] --- old-rpm-tags [ 296s] +++ new-rpm-tags [ 296s] @@ -203,4 +203,4 @@ [ 296s] -/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.opt-1.pyc 3e9ed4ded7ebba3ebd5e955fa02b1de2f22a2c00432f703b00442bb993157ac3 0 [ 296s] -/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.pyc 3e9ed4ded7ebba3ebd5e955fa02b1de2f22a2c00432f703b00442bb993157ac3 0 [ 296s] -/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.opt-1.pyc d4d43da743847cd68ef34ac181f488e252d47a1bf09410a9039177673134dbf6 0 [ 296s] -/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.pyc d4d43da743847cd68ef34ac181f488e252d47a1bf09410a9039177673134dbf6 0 [ 296s] +/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.opt-1.pyc 31683abf47ff801621ac163034eeb09a9f0db581e919f1d8e5ab5bc1ecdeba89 0 [ 296s] +/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.pyc 31683abf47ff801621ac163034eeb09a9f0db581e919f1d8e5ab5bc1ecdeba89 0 [ 296s] +/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.opt-1.pyc 1c1cb4eec5b30761d34b0efcb9159686ecb731fb3e3897a7c2675fdd5a220c0d 0 [ 296s] +/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.pyc 1c1cb4eec5b30761d34b0efcb9159686ecb731fb3e3897a7c2675fdd5a220c0d 0 [ 296s] @@ -209 +209 @@ [ 296s] -/usr/lib/python3.13/site-packages/libxml2mod.so 3f5472f5f4c2d212fe7b0e0f30670843fba30816df62ac7abe87cdf5f0f91b95 0 [ 296s] +/usr/lib/python3.13/site-packages/libxml2mod.so 9238963e409c5bea54ae3dce02b8f4fb00fd055824e48f0d25bf5511cbc56161 0 [ 296s] @@ -213 +213 @@ [ 296s] -/usr/share/doc/packages/python3-libxml2/tests/Makefile 0af52f17779c6e998194b0ee15804a6eaf295006fcf47903d53e0fa6dc0a3e9e 2 [ 296s] +/usr/share/doc/packages/python3-libxml2/tests/Makefile e9d62087815e43c5bf494dedd1c0c34e820efa396b708ae6a38771957807fe58 2 [ 296s] @@ -276 +276 @@ [ 296s] -python3-libxml2-2.13.5-1.1.src.rpm [ 296s] +python3-libxml2-2.13.5-1.2.src.rpm [ 296s] comparing rpmtags [ 296s] comparing RELEASE [ 296s] comparing PROVIDES [ 296s] comparing scripts [ 296s] comparing filelist [ 297s] comparing file checksum [ 297s] creating rename script [ 297s] RPM file checksum differs. [ 297s] Extracting packages [ 298s] /usr/share/doc/packages/python3-libxml2/tests/Makefile differs (ASCII text, with very long lines (435)) [ 298s] --- old//usr/share/doc/packages/python3-libxml2/tests/Makefile 2025-12-30 01:36:25.000000000 +0900 [ 298s] +++ new//usr/share/doc/packages/python3-libxml2/tests/Makefile 2026-01-02 21:49:06.000000000 +0900 [ 298s] @@ -221,7 +221,7 @@ [ 298s] RANLIB = ranlib [ 298s] RDL_CFLAGS = [ 298s] RDL_LIBS = -lreadline -lhistory [ 298s] -RELDATE = Mon Dec 29 2025 [ 298s] +RELDATE = Fri Jan 2 2026 [ 298s] SED = /bin/sed [ 298s] SET_MAKE = [ 298s] SHELL = /bin/sh [ 298s] compare /.build.oldpackages/python3-libxml2-debuginfo-2.13.5-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python3-libxml2-debuginfo-2.13.5-1.2.armv7l.rpm [ 298s] skipping -debuginfo package [ 298s] compare /.build.oldpackages/python3-libxml2-debugsource-2.13.5-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python3-libxml2-debugsource-2.13.5-1.2.armv7l.rpm [ 298s] Comparing python3-libxml2-debugsource-2.13.5-1.1.armv7l.rpm to python3-libxml2-debugsource-2.13.5-1.2.armv7l.rpm [ 298s] This is not a prerelease project. Compare the project name. [ 298s] comparing disturl_distribution [ 298s] comparing the rpm tags of python3-libxml2-debugsource [ 298s] --- old-rpm-tags [ 298s] +++ new-rpm-tags [ 298s] @@ -170 +170 @@ [ 298s] -python3-libxml2-2.13.5-1.1.src.rpm [ 298s] +python3-libxml2-2.13.5-1.2.src.rpm [ 298s] comparing rpmtags [ 298s] comparing RELEASE [ 298s] comparing PROVIDES [ 298s] comparing scripts [ 298s] comparing filelist [ 299s] comparing file checksum [ 299s] creating rename script [ 299s] RPM meta information is identical [ 299s] No rpmlint.log available [ 299s] [ 299s] c3cbe3df19f9 finished "build python3-libxml2.spec" at Fri Jan 2 12:49:51 UTC 2026. [ 299s]