[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] f6cb95dda7d4 started "build python3-wheel.spec" at Mon Dec 29 16:40:19 UTC 2025. [ 1s] [ 1s] Building python3-wheel for project 'Tizen-Base-Dev' repository 'standard' arch 'armv7l' srcmd5 '5c3fb2f731a470c5ce248eea598ef3d2' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.1/.build-srcdir/python3-wheel.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.1/.build-srcdir/python3-wheel.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.1/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.1/.build-srcdir/python3-wheel.spec build ... [ 2s] registering binfmt handlers for cross build [ 6s] cycle: nss -> libsoftokn3 [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] [1/43] preinstalling libmagic-data... [ 6s] [2/43] preinstalling libncurses... [ 6s] [3/43] preinstalling setup... [ 7s] [4/43] preinstalling filesystem... [ 7s] [5/43] preinstalling glibc... [ 8s] [6/43] preinstalling libgcc... [ 8s] [7/43] preinstalling bash... [ 8s] [8/43] preinstalling diffutils... [ 8s] [9/43] preinstalling grep... [ 9s] [10/43] preinstalling libattr... [ 9s] [11/43] preinstalling libblkid... [ 9s] [12/43] preinstalling libbz2... [ 9s] [13/43] preinstalling libcap... [ 9s] [14/43] preinstalling libfreebl3... [ 10s] [15/43] preinstalling liblua... [ 10s] [16/43] preinstalling liblzma... [ 10s] [17/43] preinstalling libopenssl3... [ 11s] [18/43] preinstalling libpopt... [ 11s] [19/43] preinstalling libreadline... [ 11s] [20/43] preinstalling libsmack... [ 11s] [21/43] preinstalling libsqlite... [ 12s] [22/43] preinstalling libuuid... [ 12s] [23/43] preinstalling libxcrypt... [ 12s] [24/43] preinstalling libxml2... [ 12s] [25/43] preinstalling libzstd1... [ 13s] [26/43] preinstalling nspr... [ 13s] [27/43] preinstalling sed... [ 13s] [28/43] preinstalling zlib... [ 13s] [29/43] preinstalling qemu-accel-x86_64-armv7l... [ 27s] [30/43] preinstalling qemu-linux-user-x86_64-cross... [ 31s] [31/43] preinstalling coreutils... [ 31s] [32/43] preinstalling libacl... [ 31s] [33/43] preinstalling libelf... [ 31s] [34/43] preinstalling libmount... [ 31s] [35/43] preinstalling smack... [ 31s] [36/43] preinstalling bzip2... [ 31s] [37/43] preinstalling libmagic... [ 32s] [38/43] preinstalling tar... [ 32s] [39/43] preinstalling util-linux... [ 32s] [40/43] preinstalling rpm... [ 32s] [41/43] preinstalling util-linux-su... [ 32s] [42/43] preinstalling nss... [ 32s] [43/43] preinstalling libsoftokn3... [ 33s] running qemu-linux-user-x86_64-cross postinstall script [ 34s] running qemu-accel-x86_64-armv7l postinstall script [ 34s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 34s] running setup postinstall script [ 34s] chroot: failed to run command '': No such file or directory [ 34s] initializing rpm db... [ 34s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 34s] breaking dependency libxcrypt-devel -> glibc-devel [ 34s] cycle: libsoftokn3 -> nss [ 34s] breaking dependency nss -> libsoftokn3 [ 34s] done [ 34s] querying package ids... [ 35s] [1/111] cumulate libmagic-data-5.46-1.5 [ 35s] [2/111] cumulate python3-flit_core-3.9.0-1.1 [ 35s] [3/111] cumulate python3-pyparsing-3.1.1-1.1 [ 35s] [4/111] cumulate python3-six-1.16.0-1.1 [ 35s] [5/111] cumulate python3-typing_extensions-4.9.0-1.1 [ 35s] [6/111] cumulate setup-0.9-1.1 [ 35s] [7/111] cumulate filesystem-3.1-1.1 [ 35s] [8/111] cumulate python3-packaging-23.2-1.1 [ 35s] [9/111] cumulate glibc-2.40-1.6 [ 35s] [10/111] cumulate libatomic-14.2.0-1.6 [ 35s] [11/111] cumulate libgcc-14.2.0-1.6 [ 35s] [12/111] cumulate bash-3.2.57-1.1 [ 35s] [13/111] cumulate cpio-2.8-1.1 [ 35s] [14/111] cumulate diffutils-3.10-1.1 [ 35s] [15/111] cumulate findutils-4.3.8-1.6 [ 35s] [16/111] cumulate gdbm-1.8.3-1.6 [ 35s] [17/111] cumulate hostname-3.23-1.1 [ 35s] [18/111] cumulate libattr-2.5.1-1.6 [ 35s] [19/111] cumulate libblkid-2.41.2-1.5 [ 35s] [20/111] cumulate libbz2-1.0.8-1.6 [ 35s] [21/111] cumulate libcap-2.73-1.5 [ 35s] [22/111] cumulate libexpat-2.7.3-1.6 [ 35s] [23/111] cumulate libffi-3.4.7-1.6 [ 35s] [24/111] cumulate libfreebl3-3.109-1.1 [ 35s] [25/111] cumulate libgfortran-14.2.0-1.6 [ 35s] [26/111] cumulate libgomp-14.2.0-1.6 [ 35s] [27/111] cumulate libitm-14.2.0-1.6 [ 35s] [28/111] cumulate libltdl-2.5.4-1.6 [ 35s] [29/111] cumulate liblua-5.1.5-1.5 [ 35s] [30/111] cumulate liblzma-5.6.3-1.6 [ 35s] [31/111] cumulate libopenssl3-3.0.18-1.6 [ 35s] [32/111] cumulate libpcre-8.45-1.6 [ 35s] [33/111] cumulate libpopt-1.16-1.4 [ 35s] [34/111] cumulate libpython3_131_0-3.13.1-1.6 [ 35s] [35/111] cumulate libsmack-1.3.1-1.4 [ 35s] [36/111] cumulate libsmartcols-2.41.2-1.5 [ 35s] [37/111] cumulate libsqlite-3.51.0-1.6 [ 35s] [38/111] cumulate libstdc++-14.2.0-1.6 [ 35s] [39/111] cumulate libuuid-2.41.2-1.5 [ 35s] [40/111] cumulate libxcrypt-4.4.36-1.6 [ 35s] [41/111] cumulate libxml2-2.13.5-1.6 [ 35s] [42/111] cumulate libzstd1-1.5.6-1.6 [ 35s] [43/111] cumulate m4-1.4.20-1.1 [ 35s] [44/111] cumulate net-tools-2.0_20121208git-1.5 [ 35s] [45/111] cumulate nspr-4.36-1.1 [ 35s] [46/111] cumulate patch-2.7.6-1.4 [ 35s] [47/111] cumulate pkg-config-0.29.2-1.6 [ 35s] [48/111] cumulate sed-4.1c-1.6 [ 35s] [49/111] cumulate update-alternatives-1.22.2-1.1 [ 35s] [50/111] cumulate which-2.17-1.1 [ 35s] [51/111] cumulate zlib-1.3.1-1.6 [ 35s] [52/111] cumulate build-compare-2023.06.18-1.1 [ 35s] [53/111] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 35s] [54/111] cumulate libstdc++-devel-14.2.0-1.6 [ 35s] [55/111] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-2.1 [ 35s] [56/111] cumulate cpp-14.2.0-1.6 [ 35s] [57/111] cumulate gcc-c++-14.2.0-1.6 [ 35s] [58/111] cumulate binutils-libs-2.43-1.6 [ 35s] [59/111] cumulate coreutils-6.9-14.1 [ 35s] [60/111] cumulate gawk-3.1.5-1.1 [ 35s] [61/111] cumulate grep-2.5.2-1.5 [ 35s] [62/111] cumulate libacl-2.3.2-1.6 [ 35s] [63/111] cumulate libcc1-14.2.0-1.6 [ 35s] [64/111] cumulate libelf-0.189-1.6 [ 35s] [65/111] cumulate liblastlog2-2.41.2-1.5 [ 35s] [66/111] cumulate libmount-2.41.2-1.5 [ 35s] [67/111] cumulate make-4.4.1-1.6 [ 35s] [68/111] cumulate nss-certs-3.109-1.1 [ 35s] [69/111] cumulate smack-1.3.1-1.4 [ 35s] [70/111] cumulate bzip2-1.0.8-1.6 [ 35s] [71/111] cumulate libfdisk-2.41.2-1.5 [ 35s] [72/111] cumulate libmagic-5.46-1.5 [ 35s] [73/111] cumulate xz-5.6.3-1.6 [ 35s] [74/111] cumulate perl-5.38.0-1.6 [ 35s] [75/111] cumulate build-mkbaselibs-20120927-1.1 [ 35s] [76/111] cumulate linux-glibc-devel-6.6-1.6 [ 35s] [77/111] cumulate terminfo-base-full-6.4-1.6 [ 35s] [78/111] cumulate autoconf-2.71-1.6 [ 35s] [79/111] cumulate file-5.46-1.5 [ 35s] [80/111] cumulate glibc-locale-2.40-1.6 [ 35s] [81/111] cumulate tar-1.17-1.1 [ 35s] [82/111] cumulate binutils-2.43-1.6 [ 35s] [83/111] cumulate gzip-1.3.12-1.5 [ 35s] [84/111] cumulate pam-1.1.6-1.5 [ 35s] [85/111] cumulate tzdata-2025b-1.1 [ 35s] [86/111] cumulate libdw-0.189-1.6 [ 35s] [87/111] cumulate gcc-14.2.0-1.6 [ 35s] [88/111] cumulate libarchive-3.8.1-1.5 [ 35s] [89/111] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 35s] [90/111] cumulate automake-1.16.5-1.6 [ 35s] [91/111] cumulate libasm-0.189-1.6 [ 35s] [92/111] cumulate libncurses6-6.4-1.6 [ 35s] [93/111] cumulate build-20120927-1.1 [ 35s] [94/111] cumulate rpm-4.14.1.1-1.6 [ 35s] [95/111] cumulate libncurses-6.4-1.6 [ 35s] [96/111] cumulate less-685-1.1 [ 35s] [97/111] cumulate libreadline-5.2-1.6 [ 35s] [98/111] cumulate libtool-2.5.4-1.6 [ 35s] [99/111] cumulate elfutils-0.189-1.6 [ 35s] [100/111] cumulate python3-base-3.13.1-1.6 [ 35s] [101/111] cumulate util-linux-2.41.2-1.5 [ 35s] [102/111] cumulate python3-3.13.1-1.1 [ 35s] [103/111] cumulate util-linux-su-2.41.2-1.5 [ 35s] [104/111] cumulate python3-devel-3.13.1-1.6 [ 35s] [105/111] cumulate python3-setuptools-69.0.2-1.1 [ 35s] [106/111] cumulate python3-pip-23.3.1-1.1 [ 35s] [107/111] cumulate libxcrypt-devel-4.4.36-1.6 [ 35s] [108/111] cumulate nss-3.109-1.1 [ 35s] [109/111] cumulate glibc-devel-2.40-1.6 [ 35s] [110/111] cumulate libsoftokn3-3.109-1.1 [ 35s] [111/111] cumulate rpm-build-4.14.1.1-1.6 [ 35s] now installing cumulated packages [ 35s] Preparing... ######################################## [ 35s] Updating / installing... [ 35s] setup-0.9-1.1 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 35s] ########################## [ 35s] filesystem-3.1-1.1 ######################################## [ 36s] python3-typing_extensions-4.9.0-1.1 ######################################## [ 36s] python3-six-1.16.0-1.1 ######################################## [ 36s] python3-pyparsing-3.1.1-1.1 ######################################## [ 36s] python3-packaging-23.2-1.1 ######################################## [ 36s] libmagic-data-5.46-1.5 ######################################## [ 36s] python3-flit_core-3.9.0-1.1 ######################################## [ 36s] glibc-2.40-1.6 ######################################## [ 37s] libgcc-14.2.0-1.6 ######################################## [ 37s] bash-3.2.57-1.1 ######################################## [ 37s] zlib-1.3.1-1.6 ######################################## [ 37s] coreutils-6.9-14.1 ######################################## [ 37s] libbz2-1.0.8-1.6 ######################################## [ 38s] liblzma-5.6.3-1.6 ######################################## [ 38s] libstdc++-14.2.0-1.6 ######################################## [ 38s] libelf-0.189-1.6 ######################################## [ 39s] libdw-0.189-1.6 ######################################## [ 39s] libopenssl3-3.0.18-1.6 ######################################## [ 40s] libxcrypt-4.4.36-1.6 ######################################## [ 40s] libmagic-5.46-1.5 ######################################## [ 40s] libblkid-2.41.2-1.5 ######################################## [ 40s] libsqlite-3.51.0-1.6 ######################################## [ 41s] nspr-4.36-1.1 ######################################## [ 41s] pam-1.1.6-1.5 ######################################## [ 41s] gdbm-1.8.3-1.6 ######################################## [ 44s] perl-5.38.0-1.6 ######################################## [ 44s] libcap-2.73-1.5 ######################################## [ 44s] libfreebl3-3.109-1.1 ######################################## [ 44s] liblua-5.1.5-1.5 ######################################## [ 44s] libpopt-1.16-1.4 ######################################## [ 45s] libpython3_131_0-3.13.1-1.6 ######################################## [ 45s] libuuid-2.41.2-1.5 ######################################## [ 45s] libzstd1-1.5.6-1.6 ######################################## [ 46s] pkg-config-0.29.2-1.6 ######################################## [ 46s] build-mkbaselibs-20120927-1.1 ######################################## [ 46s] linux-glibc-devel-6.6-1.6 ######################################## [ 46s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 46s] glibc-devel-2.40-1.6 ######################################## [ 46s] terminfo-base-full-6.4-1.6 ######################################## [ 46s] libncurses6-6.4-1.6 ######################################## [ 46s] libreadline-5.2-1.6 ######################################## [ 47s] libfdisk-2.41.2-1.5 ######################################## [ 47s] nss-certs-3.109-1.1 ######################################## [ 47s] libsoftokn3-3.109-1.1 ######################################## [ 48s] nss-3.109-1.1 ######################################## [ 48s] liblastlog2-2.41.2-1.5 ######################################## [ 48s] libmount-2.41.2-1.5 ######################################## [ 48s] libasm-0.189-1.6 ######################################## [ 48s] libcc1-14.2.0-1.6 ######################################## [ 49s] xz-5.6.3-1.6 ######################################## [ 49s] bzip2-1.0.8-1.6 ######################################## [ 49s] gzip-1.3.12-1.5 ######################################## [ 49s] binutils-libs-2.43-1.6 ######################################## [ 49s] binutils-2.43-1.6 ######################################## [ 49s] make-4.4.1-1.6 ######################################## [ 49s] findutils-4.3.8-1.6 ######################################## [ 49s] libattr-2.5.1-1.6 ######################################## [ 50s] libacl-2.3.2-1.6 ######################################## [ 50s] tar-1.17-1.1 ######################################## [ 50s] libexpat-2.7.3-1.6 ######################################## [ 50s] libffi-3.4.7-1.6 ######################################## [ 51s] python3-base-3.13.1-1.6 ######################################## [ 51s] python3-3.13.1-1.1 ######################################## [ 51s] python3-setuptools-69.0.2-1.1 ######################################## [ 51s] libgfortran-14.2.0-1.6 ######################################## [ 52s] libgomp-14.2.0-1.6 ######################################## [ 52s] libitm-14.2.0-1.6 ######################################## [ 52s] libltdl-2.5.4-1.6 ######################################## [ 52s] libpcre-8.45-1.6 ######################################## [ 53s] libsmack-1.3.1-1.4 ######################################## [ 53s] libsmartcols-2.41.2-1.5 ######################################## [ 53s] libxml2-2.13.5-1.6 ######################################## [ 54s] libarchive-3.8.1-1.5 ######################################## [ 54s] rpm-4.14.1.1-1.6 ######################################## [ 55s] m4-1.4.20-1.1 ######################################## [ 55s] autoconf-2.71-1.6 ######################################## [ 55s] automake-1.16.5-1.6 ######################################## [ 55s] patch-2.7.6-1.4 ######################################## [ 55s] sed-4.1c-1.6 ######################################## [ 56s] util-linux-2.41.2-1.5 ######################################## [ 56s] libatomic-14.2.0-1.6 ######################################## [ 56s] libtool-2.5.4-1.6 ######################################## [ 57s] python3-pip-23.3.1-1.1 ######################################## [ 57s] build-20120927-1.1 ######################################## [ 57s] libncurses-6.4-1.6 ######################################## [ 57s] libstdc++-devel-14.2.0-1.6 ######################################## [ 57s] build-compare-2023.06.18-1.1 ######################################## [ 57s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 60s] qemu-linux-user-x86_64-cross-9.2.3.1-2######################################## [ 61s] gcc-14.2.0-1.6 ######################################## [ 74s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 75s] util-linux-su-2.41.2-1.5 ######################################## [ 75s] rpm-build-4.14.1.1-1.6 ######################################## [ 75s] smack-1.3.1-1.4 ######################################## [ 75s] grep-2.5.2-1.5 ######################################## [ 75s] python3-devel-3.13.1-1.6 ######################################## [ 75s] elfutils-0.189-1.6 ######################################## [ 75s] less-685-1.1 ######################################## [ 75s] file-5.46-1.5 ######################################## [ 76s] glibc-locale-2.40-1.6 ######################################## [ 76s] tzdata-2025b-1.1 ######################################## [ 77s] cpp-14.2.0-1.6 ######################################## [ 78s] gcc-c++-14.2.0-1.6 ######################################## [ 79s] gawk-3.1.5-1.1 ######################################## [ 79s] cpio-2.8-1.1 ######################################## [ 79s] diffutils-3.10-1.1 ######################################## [ 79s] hostname-3.23-1.1 ######################################## [ 79s] net-tools-2.0_20121208git-1.5 ######################################## [ 79s] update-alternatives-1.22.2-1.1 ######################################## [ 79s] which-2.17-1.1 ######################################## [ 79s] now finalizing build dir... [ 80s] ----------------------------------------------------------------- [ 80s] I have the following modifications for python3-wheel.spec: [ 80s] 4c4 [ 80s] < Release: 0 [ 80s] --- [ 80s] > Release: 1.1 [ 81s] build target is armv7l-tizen-linux [ 81s] ----------------------------------------------------------------- [ 81s] ----- building python3-wheel.spec (user abuild) [ 81s] ----------------------------------------------------------------- [ 81s] ----------------------------------------------------------------- [ 81s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Dev/standard/5c3fb2f731a470c5ce248eea598ef3d2-python3-wheel' /home/abuild/rpmbuild/SOURCES/python3-wheel.spec [ 81s] Building target platforms: armv7l-tizen-linux [ 81s] Building for target armv7l-tizen-linux [ 81s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.EfUOSw [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + rm -rf wheel-0.42.0 [ 81s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/wheel-0.42.0.tar.gz [ 81s] + /bin/tar -xof - [ 81s] + STATUS=0 [ 81s] + '[' 0 -ne 0 ']' [ 81s] + cd wheel-0.42.0 [ 81s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 81s] + exit 0 [ 81s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.n0lPr4 [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + CFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 81s] + export CFLAGS [ 81s] + CXXFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 81s] + export CXXFLAGS [ 81s] + LDFLAGS= [ 81s] + export LDFLAGS [ 81s] + cd wheel-0.42.0 [ 81s] + ref=/usr/lib/rpm [ 81s] + mints=0 [ 81s] + case $(uname -m) in [ 81s] ++ uname -m [ 81s] + for s in guess sub [ 81s] ++ find -maxdepth 8 -name config.guess [ 81s] + for s in guess sub [ 81s] ++ find -maxdepth 8 -name config.sub [ 81s] + cp /home/abuild/rpmbuild/SOURCES/python3-wheel.manifest . [ 81s] + /usr/bin/python3 -m venv build/env [ 133s] + build/env/bin/python -m ensurepip [ 155s] Looking in links: /tmp/tmpevfp0gn2 [ 155s] Requirement already satisfied: pip in ./build/env/lib/python3.13/site-packages (24.3.1) [ 156s] + export PYTHONPATH=build/env/lib/python3.13/site-packages [ 156s] + PYTHONPATH=build/env/lib/python3.13/site-packages [ 156s] + /usr/bin/python3 -mpip wheel --verbose --progress-bar off --disable-pip-version-check --use-pep517 --no-build-isolation --no-deps --no-cache-dir --wheel-dir ./build . [ 162s] Processing /home/abuild/rpmbuild/BUILD/wheel-0.42.0 [ 162s] Preparing metadata (pyproject.toml): started [ 162s] Running command Preparing metadata (pyproject.toml) [ 163s] Preparing metadata (pyproject.toml): finished with status 'done' [ 163s] Building wheels for collected packages: wheel [ 163s] Building wheel for wheel (pyproject.toml): started [ 164s] Running command Building wheel for wheel (pyproject.toml) [ 165s] Building wheel for wheel (pyproject.toml): finished with status 'done' [ 165s] Created wheel for wheel: filename=wheel-0.42.0-py3-none-any.whl size=65375 sha256=877cbfb957e4e05298ec4ecfc5e6fa8a1074c1bb1feb9b930dea505fd9238903 [ 165s] Stored in directory: /tmp/pip-ephem-wheel-cache-hwtg3q_0/wheels/ae/02/d3/8027de5d1541220886b5f3794c27d98ad13204a0b1b772b93a [ 165s] Successfully built wheel [ 166s] + exit 0 [ 166s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.n7OJ8J [ 166s] + umask 022 [ 166s] + cd /home/abuild/rpmbuild/BUILD [ 166s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm [ 166s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm [ 166s] + cd wheel-0.42.0 [ 166s] + export PYTHONPATH=build/env/lib/python3.13/site-packages [ 166s] + PYTHONPATH=build/env/lib/python3.13/site-packages [ 166s] + /usr/bin/python3 -mpip install --verbose --progress-bar off --disable-pip-version-check --root /home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm --no-compile --ignore-installed --no-deps --no-index --no-cache-dir --find-links ./build wheel==0.42.0 [ 172s] Using pip 24.3.1 from /home/abuild/rpmbuild/BUILD/wheel-0.42.0/build/env/lib/python3.13/site-packages/pip (python 3.13) [ 173s] Looking in links: ./build [ 174s] Processing ./build/wheel-0.42.0-py3-none-any.whl [ 174s] Installing collected packages: wheel [ 174s] Creating /home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm/usr/bin [ 174s] changing mode of /home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm/usr/bin/wheel to 755 [ 174s] WARNING: The script wheel is installed in '/home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm/usr/bin' which is not on PATH. [ 174s] Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. [ 174s] Successfully installed wheel-0.42.0 [ 174s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.42.0-1.1 --unique-debug-src-base python3-wheel-0.42.0-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/wheel-0.42.0 [ 175s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/wheel-0.42.0/python3-wheel-debuginfo.manifest [ 175s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/wheel-0.42.0/python3-wheel-debugsource.manifest [ 175s] + /usr/lib/rpm/check-buildroot [ 175s] + /usr/lib/rpm//brp-compress [ 175s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 175s] + /usr/lib/rpm/brp-python-hardlink [ 175s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm [ 175s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/wheel-0.42.0/isu.list [ 175s] ~/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm ~/rpmbuild/BUILD/wheel-0.42.0 [ 175s] ~/rpmbuild/BUILD/wheel-0.42.0 [ 175s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 176s] Processing files: python3-wheel-0.42.0-1.1.noarch [ 176s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.mWkgwB [ 176s] + umask 022 [ 176s] + cd /home/abuild/rpmbuild/BUILD [ 176s] + cd wheel-0.42.0 [ 176s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm/usr/share/licenses/python3-wheel [ 176s] + export LC_ALL=C [ 176s] + LC_ALL=C [ 176s] + export LICENSEDIR [ 176s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm/usr/share/licenses/python3-wheel [ 176s] + cp -pr LICENSE.txt /home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm/usr/share/licenses/python3-wheel [ 176s] + exit 0 [ 177s] Provides: python3-wheel = 0.42.0-1.1 [ 177s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 177s] Requires: /usr/bin/python3 [ 177s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm [ 177s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-wheel-0.42.0-1.1.src.rpm [ 177s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-wheel-0.42.0-1.1.noarch.rpm [ 177s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.BpY9v0 [ 177s] + umask 022 [ 177s] + cd /home/abuild/rpmbuild/BUILD [ 177s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm [ 177s] + cd wheel-0.42.0 [ 177s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-wheel-0.42.0-1.1.arm [ 177s] + exit 0 [ 178s] ... checking for files with abuild user/group [ 178s] ... creating baselibs [ 179s] [ 179s] f6cb95dda7d4 finished "build python3-wheel.spec" at Mon Dec 29 16:43:17 UTC 2025. [ 179s] Retried build at Fri Jan 2 12:58:58 2026 returned same result, skipped