[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] a1317485cc65 started "build python3-libxml2.spec" at Sat Sep 13 20:39:34 UTC 2025. [ 0s] [ 0s] Building python3-libxml2 for project 'Tizen-Base-Toolchain' repository 'standard' arch 'armv7l' srcmd5 '970d2d0bbdce2b433057d5956cb9196e' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build-srcdir/python3-libxml2.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build-srcdir/python3-libxml2.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/18/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build-srcdir/python3-libxml2.spec build ... [ 2s] registering binfmt handlers for cross build [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] [1/43] preinstalling libmagic-data... [ 4s] [2/43] preinstalling libncurses... [ 4s] [3/43] preinstalling setup... [ 4s] [4/43] preinstalling filesystem... [ 5s] [5/43] preinstalling glibc... [ 5s] [6/43] preinstalling libgcc... [ 5s] [7/43] preinstalling bash... [ 5s] [8/43] preinstalling diffutils... [ 5s] [9/43] preinstalling grep... [ 5s] [10/43] preinstalling libattr... [ 6s] [11/43] preinstalling libblkid... [ 6s] [12/43] preinstalling libbz2... [ 6s] [13/43] preinstalling libcap... [ 6s] [14/43] preinstalling libfreebl3... [ 6s] [15/43] preinstalling liblua... [ 6s] [16/43] preinstalling liblzma... [ 6s] [17/43] preinstalling libpopt... [ 6s] [18/43] preinstalling libreadline... [ 6s] [19/43] preinstalling libsmack... [ 6s] [20/43] preinstalling libsqlite... [ 7s] [21/43] preinstalling libuuid... [ 7s] [22/43] preinstalling libxcrypt... [ 7s] [23/43] preinstalling libxml2... [ 7s] [24/43] preinstalling libzstd1... [ 7s] [25/43] preinstalling nspr... [ 7s] [26/43] preinstalling sed... [ 7s] [27/43] preinstalling zlib... [ 8s] [28/43] preinstalling clang-accel-x86_64-armv7l... [ 21s] [29/43] preinstalling qemu-accel-x86_64-armv7l... [ 38s] [30/43] preinstalling qemu-linux-user-x86_64-cross... [ 43s] [31/43] preinstalling coreutils... [ 43s] [32/43] preinstalling libacl... [ 43s] [33/43] preinstalling libelf... [ 44s] [34/43] preinstalling libmount... [ 44s] [35/43] preinstalling smack... [ 44s] [36/43] preinstalling bzip2... [ 45s] [37/43] preinstalling libmagic... [ 45s] [38/43] preinstalling tar... [ 45s] [39/43] preinstalling util-linux... [ 45s] [40/43] preinstalling util-linux-su... [ 45s] [41/43] preinstalling nss... [ 46s] [42/43] preinstalling libsoftokn3... [ 46s] [43/43] preinstalling rpm... [ 47s] running qemu-linux-user-x86_64-cross postinstall script [ 48s] running qemu-accel-x86_64-armv7l postinstall script [ 48s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 48s] running clang-accel-x86_64-armv7l postinstall script [ 48s] running setup postinstall script [ 48s] chroot: failed to run command '': No such file or directory [ 48s] initializing rpm db... [ 48s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 48s] breaking dependency libxcrypt-devel -> glibc-devel [ 48s] cycle: clang -> llvm [ 48s] breaking dependency llvm -> clang [ 48s] cycle: clang -> llvm -> lldb [ 48s] breaking dependency llvm -> lldb [ 48s] cycle: libsoftokn3 -> nss [ 48s] breaking dependency nss -> libsoftokn3 [ 49s] done [ 49s] querying package ids... [ 50s] [1/116] cumulate libmagic-data-5.45-1.6 [ 50s] [2/116] cumulate setup-0.9-1.1 [ 50s] [3/116] cumulate filesystem-3.1-1.1 [ 50s] [4/116] cumulate glibc-2.40-1.6 [ 50s] [5/116] cumulate libatomic-14.2.0-1.6 [ 50s] [6/116] cumulate libgcc-14.2.0-1.6 [ 50s] [7/116] cumulate bash-3.2.57-1.1 [ 50s] [8/116] cumulate cpio-2.8-1.1 [ 50s] [9/116] cumulate diffutils-3.10-1.1 [ 50s] [10/116] cumulate findutils-4.3.8-1.6 [ 50s] [11/116] cumulate gdbm-1.8.3-1.8 [ 50s] [12/116] cumulate hostname-3.23-1.1 [ 50s] [13/116] cumulate libattr-2.5.1-1.6 [ 50s] [14/116] cumulate libblkid-2.39.3-1.6 [ 50s] [15/116] cumulate libbz2-1.0.8-1.7 [ 50s] [16/116] cumulate libcap-2.73-1.6 [ 50s] [17/116] cumulate libexpat-2.6.2-1.8 [ 50s] [18/116] cumulate libffi-3.4.7-1.7 [ 50s] [19/116] cumulate libfreebl3-3.109-1.8 [ 50s] [20/116] cumulate libgfortran-14.2.0-1.6 [ 50s] [21/116] cumulate libgomp-14.2.0-1.6 [ 50s] [22/116] cumulate libitm-14.2.0-1.6 [ 50s] [23/116] cumulate libltdl-2.4.7-1.6 [ 50s] [24/116] cumulate liblua-5.1.5-1.6 [ 50s] [25/116] cumulate liblzma-5.6.3-1.7 [ 50s] [26/116] cumulate libopenssl3-3.0.16-1.8 [ 50s] [27/116] cumulate libpcre-8.45-1.6 [ 50s] [28/116] cumulate libpopt-1.16-1.5 [ 50s] [29/116] cumulate libpython3_131_0-3.13.1-1.6 [ 50s] [30/116] cumulate libsmack-1.3.1-1.5 [ 50s] [31/116] cumulate libsmartcols-2.39.3-1.6 [ 50s] [32/116] cumulate libsqlite-3.50.2-1.6 [ 50s] [33/116] cumulate libstdc++-14.2.0-1.6 [ 50s] [34/116] cumulate libuuid-2.39.3-1.6 [ 50s] [35/116] cumulate libxcrypt-4.4.36-1.8 [ 50s] [36/116] cumulate libxml2-2.13.5-1.8 [ 50s] [37/116] cumulate libzstd1-1.5.6-1.6 [ 50s] [38/116] cumulate m4-1.4.19-1.1 [ 50s] [39/116] cumulate net-tools-2.0_20121208git-1.6 [ 50s] [40/116] cumulate nspr-4.36-1.5 [ 50s] [41/116] cumulate patch-2.7.6-1.5 [ 50s] [42/116] cumulate pkg-config-0.29.2-1.7 [ 50s] [43/116] cumulate sed-4.1c-1.6 [ 50s] [44/116] cumulate update-alternatives-1.22.2-1.1 [ 50s] [45/116] cumulate which-2.17-1.1 [ 50s] [46/116] cumulate zlib-1.3.1-1.8 [ 50s] [47/116] cumulate build-compare-2023.06.18-1.1 [ 50s] [48/116] cumulate clang-accel-x86_64-armv7l-0.4-1.1 [ 50s] [49/116] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 50s] [50/116] cumulate libstdc++-devel-14.2.0-1.6 [ 50s] [51/116] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-1.1 [ 50s] [52/116] cumulate cpp-14.2.0-1.6 [ 50s] [53/116] cumulate gcc-c++-14.2.0-1.6 [ 50s] [54/116] cumulate xz-devel-5.6.3-1.7 [ 50s] [55/116] cumulate binutils-libs-2.43-1.6 [ 50s] [56/116] cumulate coreutils-6.9-14.1 [ 50s] [57/116] cumulate gawk-3.1.5-1.1 [ 50s] [58/116] cumulate grep-2.5.2-1.4 [ 50s] [59/116] cumulate libacl-2.3.2-1.6 [ 50s] [60/116] cumulate libcc1-14.2.0-1.6 [ 50s] [61/116] cumulate libelf-0.189-1.8 [ 50s] [62/116] cumulate libmount-2.39.3-1.6 [ 50s] [63/116] cumulate make-4.4.1-1.5 [ 50s] [64/116] cumulate nss-certs-3.109-1.8 [ 50s] [65/116] cumulate smack-1.3.1-1.5 [ 50s] [66/116] cumulate bzip2-1.0.8-1.7 [ 50s] [67/116] cumulate libfdisk-2.39.3-1.6 [ 50s] [68/116] cumulate libllvm-19.1.4-1.5 [ 50s] [69/116] cumulate libmagic-5.45-1.6 [ 50s] [70/116] cumulate xz-5.6.3-1.7 [ 50s] [71/116] cumulate perl-5.38.0-1.8 [ 50s] [72/116] cumulate build-mkbaselibs-20120927-1.1 [ 50s] [73/116] cumulate linux-glibc-devel-6.6-1.8 [ 50s] [74/116] cumulate terminfo-base-full-6.4-1.8 [ 50s] [75/116] cumulate autoconf-2.71-1.8 [ 50s] [76/116] cumulate glibc-locale-2.40-1.6 [ 50s] [77/116] cumulate tar-1.17-1.1 [ 50s] [78/116] cumulate binutils-2.43-1.6 [ 50s] [79/116] cumulate file-5.45-1.6 [ 50s] [80/116] cumulate gzip-1.3.12-1.6 [ 50s] [81/116] cumulate pam-1.1.6-1.7 [ 50s] [82/116] cumulate tzdata-2024b-1.1 [ 50s] [83/116] cumulate libdw-0.189-1.8 [ 50s] [84/116] cumulate gcc-14.2.0-1.6 [ 50s] [85/116] cumulate libarchive-3.8.1-1.8 [ 50s] [86/116] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 50s] [87/116] cumulate automake-1.16.5-1.6 [ 50s] [88/116] cumulate libasm-0.189-1.8 [ 50s] [89/116] cumulate libncurses5-6.4-1.8 [ 50s] [90/116] cumulate libncurses6-6.4-1.8 [ 50s] [91/116] cumulate build-20120927-1.1 [ 50s] [92/116] cumulate libncurses-6.4-1.8 [ 50s] [93/116] cumulate less-668-1.1 [ 50s] [94/116] cumulate libreadline-5.2-1.6 [ 50s] [95/116] cumulate libtool-2.4.7-1.6 [ 50s] [96/116] cumulate ncurses-devel-6.4-1.8 [ 50s] [97/116] cumulate elfutils-0.189-1.8 [ 50s] [98/116] cumulate readline-devel-5.2-1.6 [ 50s] [99/116] cumulate libxml2-tools-2.13.5-1.8 [ 50s] [100/116] cumulate python3-base-3.13.1-1.6 [ 50s] [101/116] cumulate util-linux-2.39.3-1.6 [ 50s] [102/116] cumulate python3-3.13.1-1.7 [ 50s] [103/116] cumulate util-linux-su-2.39.3-1.6 [ 50s] [104/116] cumulate python3-devel-3.13.1-1.6 [ 50s] [105/116] cumulate libxcrypt-devel-4.4.36-1.8 [ 50s] [106/116] cumulate nss-3.109-1.8 [ 50s] [107/116] cumulate llvm-19.1.4-1.5 [ 50s] [108/116] cumulate glibc-devel-2.40-1.6 [ 50s] [109/116] cumulate clang-19.1.4-1.5 [ 50s] [110/116] cumulate libsoftokn3-3.109-1.8 [ 50s] [111/116] cumulate llvm-devel-19.1.4-1.5 [ 50s] [112/116] cumulate rpm-4.14.1.1-1.7 [ 50s] [113/116] cumulate zlib-devel-1.3.1-1.8 [ 50s] [114/116] cumulate lldb-19.1.4-1.5 [ 50s] [115/116] cumulate rpm-build-4.14.1.1-1.7 [ 50s] [116/116] cumulate libxml2-devel-2.13.5-1.8 [ 50s] now installing cumulated packages [ 52s] Preparing... ######################################## [ 52s] Updating / installing... [ 52s] setup-0.9-1.1 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 52s] ########################## [ 52s] filesystem-3.1-1.1 ######################################## [ 53s] libmagic-data-5.45-1.6 ######################################## [ 54s] glibc-2.40-1.6 ######################################## [ 54s] libgcc-14.2.0-1.6 ######################################## [ 55s] bash-3.2.57-1.1 ######################################## [ 55s] zlib-1.3.1-1.8 ######################################## [ 55s] libstdc++-14.2.0-1.6 ######################################## [ 56s] coreutils-6.9-14.1 ######################################## [ 56s] libbz2-1.0.8-1.7 ######################################## [ 56s] liblzma-5.6.3-1.7 ######################################## [ 57s] pkg-config-0.29.2-1.7 ######################################## [ 57s] libelf-0.189-1.8 ######################################## [ 57s] libdw-0.189-1.8 ######################################## [ 60s] libllvm-19.1.4-1.5 ######################################## [ 61s] libxcrypt-4.4.36-1.8 ######################################## [ 61s] libblkid-2.39.3-1.6 ######################################## [ 61s] libxml2-2.13.5-1.8 ######################################## [ 62s] nspr-4.36-1.5 ######################################## [ 62s] terminfo-base-full-6.4-1.8 ######################################## [ 63s] libncurses6-6.4-1.8 ######################################## [ 63s] libreadline-5.2-1.6 ######################################## [ 63s] pam-1.1.6-1.7 ######################################## [ 67s] clang-19.1.4-1.5 ######################################## [ 68s] lldb-19.1.4-1.5 ######################################## [ 70s] llvm-19.1.4-1.5 ######################################## [ 70s] libmagic-5.45-1.6 ######################################## [ 71s] gdbm-1.8.3-1.8 ######################################## [ 74s] perl-5.38.0-1.8 ######################################## [ 74s] libfreebl3-3.109-1.8 ######################################## [ 74s] libopenssl3-3.0.16-1.8 ######################################## [ 75s] libpopt-1.16-1.5 ######################################## [ 75s] libpython3_131_0-3.13.1-1.6 ######################################## [ 76s] libsqlite-3.50.2-1.6 ######################################## [ 76s] libuuid-2.39.3-1.6 ######################################## [ 76s] build-mkbaselibs-20120927-1.1 ######################################## [ 76s] xz-devel-5.6.3-1.7 ######################################## [ 77s] linux-glibc-devel-6.6-1.8 ######################################## [ 77s] libxcrypt-devel-4.4.36-1.8 ######################################## [ 77s] glibc-devel-2.40-1.6 ######################################## [ 77s] zlib-devel-1.3.1-1.8 ######################################## [ 77s] libfdisk-2.39.3-1.6 ######################################## [ 77s] libxml2-tools-2.13.5-1.8 ######################################## [ 77s] libncurses5-6.4-1.8 ######################################## [ 78s] ncurses-devel-6.4-1.8 ######################################## [ 78s] readline-devel-5.2-1.6 ######################################## [ 78s] nss-certs-3.109-1.8 ######################################## [ 78s] libsoftokn3-3.109-1.8 ######################################## [ 78s] nss-3.109-1.8 ######################################## [ 79s] libmount-2.39.3-1.6 ######################################## [ 79s] libasm-0.189-1.8 ######################################## [ 79s] xz-5.6.3-1.7 ######################################## [ 79s] bzip2-1.0.8-1.7 ######################################## [ 79s] gzip-1.3.12-1.6 ######################################## [ 79s] libcc1-14.2.0-1.6 ######################################## [ 79s] binutils-libs-2.43-1.6 ######################################## [ 80s] binutils-2.43-1.6 ######################################## [ 80s] make-4.4.1-1.5 ######################################## [ 80s] findutils-4.3.8-1.6 ######################################## [ 80s] libattr-2.5.1-1.6 ######################################## [ 81s] libacl-2.3.2-1.6 ######################################## [ 81s] tar-1.17-1.1 ######################################## [ 81s] libarchive-3.8.1-1.8 ######################################## [ 81s] libcap-2.73-1.6 ######################################## [ 81s] libexpat-2.6.2-1.8 ######################################## [ 82s] libffi-3.4.7-1.7 ######################################## [ 83s] python3-base-3.13.1-1.6 ######################################## [ 83s] libgfortran-14.2.0-1.6 ######################################## [ 84s] libgomp-14.2.0-1.6 ######################################## [ 84s] libitm-14.2.0-1.6 ######################################## [ 84s] libltdl-2.4.7-1.6 ######################################## [ 85s] liblua-5.1.5-1.6 ######################################## [ 85s] libpcre-8.45-1.6 ######################################## [ 85s] libsmack-1.3.1-1.5 ######################################## [ 86s] libsmartcols-2.39.3-1.6 ######################################## [ 86s] libzstd1-1.5.6-1.6 ######################################## [ 87s] rpm-4.14.1.1-1.7 ######################################## [ 87s] m4-1.4.19-1.1 ######################################## [ 87s] autoconf-2.71-1.8 ######################################## [ 88s] automake-1.16.5-1.6 ######################################## [ 88s] patch-2.7.6-1.5 ######################################## [ 88s] sed-4.1c-1.6 ######################################## [ 88s] util-linux-2.39.3-1.6 ######################################## [ 88s] libatomic-14.2.0-1.6 ######################################## [ 89s] libtool-2.4.7-1.6 ######################################## [ 89s] python3-3.13.1-1.7 ######################################## [ 89s] build-20120927-1.1 ######################################## [ 89s] libxml2-devel-2.13.5-1.8 ######################################## [ 89s] libncurses-6.4-1.8 ######################################## [ 89s] libstdc++-devel-14.2.0-1.6 ######################################## [ 89s] build-compare-2023.06.18-1.1 ######################################## [ 101s] clang-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 102s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 109s] qemu-linux-user-x86_64-cross-9.2.3.1-1######################################## [ 113s] gcc-14.2.0-1.6 ######################################## [ 131s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 133s] util-linux-su-2.39.3-1.6 ######################################## [ 133s] rpm-build-4.14.1.1-1.7 ######################################## [ 133s] smack-1.3.1-1.5 ######################################## [ 133s] grep-2.5.2-1.4 ######################################## [ 133s] python3-devel-3.13.1-1.6 ######################################## [ 133s] elfutils-0.189-1.8 ######################################## [ 133s] file-5.45-1.6 ######################################## [ 135s] llvm-devel-19.1.4-1.5 ######################################## [ 135s] less-668-1.1 ######################################## [ 136s] glibc-locale-2.40-1.6 ######################################## [ 137s] tzdata-2024b-1.1 ######################################## [ 139s] cpp-14.2.0-1.6 ######################################## [ 141s] gcc-c++-14.2.0-1.6 ######################################## [ 141s] gawk-3.1.5-1.1 ######################################## [ 141s] cpio-2.8-1.1 ######################################## [ 141s] diffutils-3.10-1.1 ######################################## [ 141s] hostname-3.23-1.1 ######################################## [ 141s] net-tools-2.0_20121208git-1.6 ######################################## [ 141s] update-alternatives-1.22.2-1.1 ######################################## [ 141s] which-2.17-1.1 ######################################## [ 145s] now finalizing build dir... [ 148s] ----------------------------------------------------------------- [ 148s] I have the following modifications for python3-libxml2.spec: [ 148s] 4c4 [ 148s] < Release: 0 [ 148s] --- [ 148s] > Release: 1.1 [ 148s] build target is armv7l-tizen-linux [ 148s] ----------------------------------------------------------------- [ 148s] ----- building python3-libxml2.spec (user abuild) [ 148s] ----------------------------------------------------------------- [ 148s] ----------------------------------------------------------------- [ 149s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/970d2d0bbdce2b433057d5956cb9196e-python3-libxml2' /home/abuild/rpmbuild/SOURCES/python3-libxml2.spec [ 149s] Building target platforms: armv7l-tizen-linux [ 149s] Building for target armv7l-tizen-linux [ 149s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.rxLeNd [ 149s] + umask 022 [ 149s] + cd /home/abuild/rpmbuild/BUILD [ 149s] + cd /home/abuild/rpmbuild/BUILD [ 149s] + rm -rf python3-libxml2-2.13.5 [ 149s] + /bin/tar -xof - [ 149s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python3-libxml2-2.13.5.tar.gz [ 150s] + STATUS=0 [ 150s] + '[' 0 -ne 0 ']' [ 150s] + cd python3-libxml2-2.13.5 [ 150s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 150s] + echo 'Patch #0 (0001-Bump-to-2.13.5.patch):' [ 150s] Patch #0 (0001-Bump-to-2.13.5.patch): [ 150s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 150s] patching file .gitignore [ 150s] + cp /home/abuild/rpmbuild/SOURCES/python3-libxml2.manifest . [ 150s] + exit 0 [ 150s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.hyXj9v [ 150s] + umask 022 [ 150s] + cd /home/abuild/rpmbuild/BUILD [ 150s] + CFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g -Wformat-security' [ 150s] + export CFLAGS [ 150s] + CXXFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g -Wformat-security' [ 150s] + export CXXFLAGS [ 150s] + FFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g ' [ 150s] + export FFLAGS [ 150s] + FCFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g ' [ 150s] + export FCFLAGS [ 150s] + LDFLAGS=-Wl,-z,relro,--as-needed,-O1,--hash-style=gnu [ 150s] + export LDFLAGS [ 150s] + cd python3-libxml2-2.13.5 [ 150s] + ref=/usr/lib/rpm [ 150s] + mints=0 [ 150s] + case $(uname -m) in [ 150s] ++ uname -m [ 150s] + for s in guess sub [ 150s] ++ find -maxdepth 8 -name config.guess [ 150s] + for s in guess sub [ 150s] ++ find -maxdepth 8 -name config.sub [ 150s] + export AR=llvm-ar RANLIB=llvm-ranlib [ 150s] + AR=llvm-ar [ 150s] + RANLIB=llvm-ranlib [ 150s] + export CC=armv7l-tizen-linux-gnueabi-clang CXX=armv7l-tizen-linux-gnueabi-clang++ [ 150s] + CC=armv7l-tizen-linux-gnueabi-clang [ 150s] + CXX=armv7l-tizen-linux-gnueabi-clang++ [ 150s] + export 'CFLAGS=-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g -fno-strict-aliasing' [ 150s] + CFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g -fno-strict-aliasing' [ 150s] + export PYTHON=/usr/bin/python3 [ 150s] + PYTHON=/usr/bin/python3 [ 150s] + CFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g -fno-strict-aliasing' [ 150s] + export CFLAGS [ 150s] + CXXFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g -Wformat-security' [ 150s] + export CXXFLAGS [ 150s] + FFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g ' [ 150s] + export FFLAGS [ 150s] + FCFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g ' [ 150s] + export FCFLAGS [ 150s] + LDFLAGS=-Wl,-z,relro,--as-needed,-O1,--hash-style=gnu [ 150s] + export LDFLAGS [ 150s] + ./autogen.sh --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 176s] libtoolize: putting auxiliary files in '.'. [ 176s] libtoolize: copying file './ltmain.sh' [ 177s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 177s] libtoolize: copying file 'm4/libtool.m4' [ 177s] libtoolize: copying file 'm4/ltoptions.m4' [ 178s] libtoolize: copying file 'm4/ltsugar.m4' [ 178s] libtoolize: copying file 'm4/ltversion.m4' [ 179s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 209s] configure.ac:47: installing './compile' [ 209s] configure.ac:12: installing './config.guess' [ 209s] configure.ac:12: installing './config.sub' [ 209s] configure.ac:42: installing './install-sh' [ 209s] configure.ac:42: installing './missing' [ 210s] Makefile.am: installing './depcomp' [ 215s] python/Makefile.am:31: installing './py-compile' [ 218s] checking build system type... armv7l-tizen-linux-gnueabi [ 218s] checking host system type... armv7l-tizen-linux-gnueabi [ 218s] checking for a BSD-compatible install... /bin/install -c [ 218s] checking whether build environment is sane... yes [ 218s] checking for a race-free mkdir -p... /bin/mkdir -p [ 218s] checking for gawk... gawk [ 218s] checking whether make sets $(MAKE)... yes [ 219s] checking whether make supports nested variables... yes [ 219s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 219s] checking whether make supports nested variables... (cached) yes [ 219s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-clang [ 220s] checking whether the C compiler works... yes [ 220s] checking for C compiler default output file name... a.out [ 220s] checking for suffix of executables... [ 221s] checking whether we are cross compiling... no [ 221s] checking for suffix of object files... o [ 221s] checking whether the compiler supports GNU C... yes [ 221s] checking whether armv7l-tizen-linux-gnueabi-clang accepts -g... yes [ 222s] checking for armv7l-tizen-linux-gnueabi-clang option to enable C11 features... none needed [ 222s] checking whether armv7l-tizen-linux-gnueabi-clang understands -c and -o together... yes [ 222s] checking whether make supports the include directive... yes (GNU style) [ 222s] checking dependency style of armv7l-tizen-linux-gnueabi-clang... gcc3 [ 222s] checking whether ln -s works... yes [ 222s] checking for tar... /bin/tar [ 222s] checking for perl... /bin/perl [ 222s] checking for wget... /usr/bin/wget [ 222s] checking for xsltproc... /usr/bin/xsltproc [ 222s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 223s] checking pkg-config is at least version 0.9.0... yes [ 223s] checking how to print strings... printf [ 223s] checking for a sed that does not truncate output... /bin/sed [ 223s] checking for grep that handles long lines and -e... /bin/grep [ 223s] checking for egrep... /bin/grep -E [ 223s] checking for fgrep... /bin/grep -F [ 223s] checking for ld used by armv7l-tizen-linux-gnueabi-clang... /usr/bin/ld [ 223s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 223s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 223s] checking the name lister (/bin/nm -B) interface... BSD nm [ 224s] checking the maximum length of command line arguments... 1572864 [ 224s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 224s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 224s] checking for /usr/bin/ld option to reload object files... -r [ 224s] checking for armv7l-tizen-linux-gnueabi-file... no [ 224s] checking for file... file [ 224s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 224s] checking for objdump... objdump [ 224s] checking how to recognize dependent libraries... pass_all [ 224s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 224s] checking for dlltool... no [ 224s] checking how to associate runtime and link libraries... printf %s\n [ 224s] checking for armv7l-tizen-linux-gnueabi-ar... llvm-ar [ 224s] checking for archiver @FILE support... @ [ 224s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 224s] checking for strip... strip [ 224s] checking for armv7l-tizen-linux-gnueabi-ranlib... llvm-ranlib [ 225s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-clang object... ok [ 225s] checking for sysroot... no [ 225s] checking for a working dd... /bin/dd [ 225s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 225s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 225s] checking for mt... no [ 226s] checking if : is a manifest tool... no [ 226s] checking for stdio.h... yes [ 226s] checking for stdlib.h... yes [ 226s] checking for string.h... yes [ 227s] checking for inttypes.h... yes [ 227s] checking for stdint.h... yes [ 227s] checking for strings.h... yes [ 227s] checking for sys/stat.h... yes [ 227s] checking for sys/types.h... yes [ 228s] checking for unistd.h... yes [ 228s] checking for dlfcn.h... yes [ 228s] checking for objdir... .libs [ 228s] checking if armv7l-tizen-linux-gnueabi-clang supports -fno-rtti -fno-exceptions... yes [ 228s] checking for armv7l-tizen-linux-gnueabi-clang option to produce PIC... -fPIC -DPIC [ 228s] checking if armv7l-tizen-linux-gnueabi-clang PIC flag -fPIC -DPIC works... yes [ 228s] checking if armv7l-tizen-linux-gnueabi-clang static flag -static works... no [ 229s] checking if armv7l-tizen-linux-gnueabi-clang supports -c -o file.o... yes [ 229s] checking if armv7l-tizen-linux-gnueabi-clang supports -c -o file.o... (cached) yes [ 229s] checking whether the armv7l-tizen-linux-gnueabi-clang linker (/usr/bin/ld) supports shared libraries... yes [ 229s] checking whether -lc should be explicitly linked in... no [ 230s] checking dynamic linker characteristics... GNU/Linux ld.so [ 230s] checking how to hardcode library paths into programs... immediate [ 230s] checking whether stripping libraries is possible... yes [ 230s] checking if libtool supports shared libraries... yes [ 230s] checking whether to build shared libraries... yes [ 230s] checking whether to build static libraries... no [ 230s] checking for cos in -lm... yes [ 230s] checking for stdint.h... (cached) yes [ 230s] checking for fcntl.h... yes [ 230s] checking for unistd.h... (cached) yes [ 230s] checking for sys/stat.h... (cached) yes [ 230s] checking for sys/mman.h... yes [ 231s] checking for sys/time.h... yes [ 231s] checking for sys/timeb.h... yes [ 231s] checking for sys/random.h... yes [ 231s] checking for dl.h... no [ 231s] checking for dlfcn.h... (cached) yes [ 231s] checking for glob.h... yes [ 231s] checking for gettimeofday... yes [ 232s] checking for ftime... yes [ 232s] checking for stat... yes [ 233s] checking for mmap... yes [ 233s] checking for munmap... yes [ 233s] checking for armv7l-tizen-linux-gnueabi-clang options needed to detect all undeclared functions... none needed [ 234s] checking whether getentropy is declared... yes [ 234s] checking whether __attribute__((destructor)) is accepted... yes [ 234s] checking whether the linker accepts -Wl,--undefined-version... yes [ 235s] checking for python version... 3.13 [ 236s] checking for python platform... linux [ 236s] checking for GNU default python prefix... ${prefix} [ 236s] checking for GNU default python exec_prefix... ${exec_prefix} [ 237s] checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.13/site-packages [ 238s] checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.13/site-packages [ 238s] checking for python-3.13... yes [ 239s] checking for library containing dlopen... none required [ 239s] checking for pthread.h... yes [ 239s] checking for library containing pthread_create... none required [ 239s] checking for libiconv... none required [ 240s] checking that generated files are newer than configure... done [ 240s] configure: creating ./config.status [ 247s] config.status: creating Makefile [ 247s] config.status: creating include/Makefile [ 248s] config.status: creating include/libxml/Makefile [ 248s] config.status: creating include/private/Makefile [ 248s] config.status: creating doc/Makefile [ 248s] config.status: creating doc/devhelp/Makefile [ 249s] config.status: creating example/Makefile [ 249s] config.status: creating fuzz/Makefile [ 249s] config.status: creating python/Makefile [ 250s] config.status: creating python/tests/Makefile [ 250s] config.status: creating xstc/Makefile [ 250s] config.status: creating include/libxml/xmlversion.h [ 251s] config.status: creating libxml-2.0.pc [ 251s] config.status: creating libxml-2.0-uninstalled.pc [ 251s] config.status: creating libxml2-config.cmake [ 251s] config.status: creating python/setup.py [ 252s] config.status: creating xml2-config [ 252s] config.status: creating config.h [ 252s] config.status: executing depfiles commands [ 257s] config.status: executing libtool commands [ 257s] [ 257s] Now type 'make' to compile libxml2. [ 257s] + CFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g -fno-strict-aliasing' [ 257s] + export CFLAGS [ 257s] + CXXFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g -Wformat-security' [ 257s] + export CXXFLAGS [ 257s] + FFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g ' [ 257s] + export FFLAGS [ 257s] + FCFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g ' [ 257s] + export FCFLAGS [ 257s] + LDFLAGS=-Wl,-z,relro,--as-needed,-O1,--hash-style=gnu [ 257s] + export LDFLAGS [ 257s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-fexceptions --with-history --enable-ipv6 --with-sax1 --with-regexps --with-threads --with-reader --with-http [ 258s] configure: WARNING: unrecognized options: --with-fexceptions [ 258s] checking build system type... armv7l-tizen-linux-gnueabi [ 258s] checking host system type... armv7l-tizen-linux-gnueabi [ 258s] checking for a BSD-compatible install... /bin/install -c [ 258s] checking whether build environment is sane... yes [ 259s] checking for a race-free mkdir -p... /bin/mkdir -p [ 259s] checking for gawk... gawk [ 259s] checking whether make sets $(MAKE)... yes [ 259s] checking whether make supports nested variables... yes [ 259s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 259s] checking whether make supports nested variables... (cached) yes [ 259s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-clang [ 259s] checking whether the C compiler works... yes [ 259s] checking for C compiler default output file name... a.out [ 259s] checking for suffix of executables... [ 260s] checking whether we are cross compiling... no [ 260s] checking for suffix of object files... o [ 260s] checking whether the compiler supports GNU C... yes [ 260s] checking whether armv7l-tizen-linux-gnueabi-clang accepts -g... yes [ 260s] checking for armv7l-tizen-linux-gnueabi-clang option to enable C11 features... none needed [ 260s] checking whether armv7l-tizen-linux-gnueabi-clang understands -c and -o together... yes [ 260s] checking whether make supports the include directive... yes (GNU style) [ 261s] checking dependency style of armv7l-tizen-linux-gnueabi-clang... gcc3 [ 261s] checking whether ln -s works... yes [ 261s] checking for tar... /bin/tar [ 261s] checking for perl... /bin/perl [ 261s] checking for wget... /usr/bin/wget [ 261s] checking for xsltproc... /usr/bin/xsltproc [ 261s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 261s] checking pkg-config is at least version 0.9.0... yes [ 261s] checking how to print strings... printf [ 261s] checking for a sed that does not truncate output... /bin/sed [ 261s] checking for grep that handles long lines and -e... /bin/grep [ 261s] checking for egrep... /bin/grep -E [ 261s] checking for fgrep... /bin/grep -F [ 261s] checking for ld used by armv7l-tizen-linux-gnueabi-clang... /usr/bin/ld [ 261s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 261s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 261s] checking the name lister (/bin/nm -B) interface... BSD nm [ 261s] checking the maximum length of command line arguments... 1572864 [ 261s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 261s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 261s] checking for /usr/bin/ld option to reload object files... -r [ 261s] checking for armv7l-tizen-linux-gnueabi-file... no [ 261s] checking for file... file [ 261s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 261s] checking for objdump... objdump [ 261s] checking how to recognize dependent libraries... pass_all [ 261s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 261s] checking for dlltool... no [ 261s] checking how to associate runtime and link libraries... printf %s\n [ 261s] checking for armv7l-tizen-linux-gnueabi-ar... llvm-ar [ 261s] checking for archiver @FILE support... @ [ 261s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 261s] checking for strip... strip [ 261s] checking for armv7l-tizen-linux-gnueabi-ranlib... llvm-ranlib [ 262s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-clang object... ok [ 262s] checking for sysroot... no [ 262s] checking for a working dd... /bin/dd [ 262s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 262s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 262s] checking for mt... no [ 262s] checking if : is a manifest tool... no [ 262s] checking for stdio.h... yes [ 262s] checking for stdlib.h... yes [ 262s] checking for string.h... yes [ 262s] checking for inttypes.h... yes [ 262s] checking for stdint.h... yes [ 263s] checking for strings.h... yes [ 263s] checking for sys/stat.h... yes [ 263s] checking for sys/types.h... yes [ 263s] checking for unistd.h... yes [ 263s] checking for dlfcn.h... yes [ 263s] checking for objdir... .libs [ 263s] checking if armv7l-tizen-linux-gnueabi-clang supports -fno-rtti -fno-exceptions... yes [ 263s] checking for armv7l-tizen-linux-gnueabi-clang option to produce PIC... -fPIC -DPIC [ 264s] checking if armv7l-tizen-linux-gnueabi-clang PIC flag -fPIC -DPIC works... yes [ 264s] checking if armv7l-tizen-linux-gnueabi-clang static flag -static works... no [ 264s] checking if armv7l-tizen-linux-gnueabi-clang supports -c -o file.o... yes [ 264s] checking if armv7l-tizen-linux-gnueabi-clang supports -c -o file.o... (cached) yes [ 264s] checking whether the armv7l-tizen-linux-gnueabi-clang linker (/usr/bin/ld) supports shared libraries... yes [ 264s] checking whether -lc should be explicitly linked in... no [ 265s] checking dynamic linker characteristics... GNU/Linux ld.so [ 265s] checking how to hardcode library paths into programs... immediate [ 265s] checking whether stripping libraries is possible... yes [ 265s] checking if libtool supports shared libraries... yes [ 265s] checking whether to build shared libraries... yes [ 265s] checking whether to build static libraries... no [ 265s] checking for cos in -lm... yes [ 265s] checking for stdint.h... (cached) yes [ 265s] checking for fcntl.h... yes [ 265s] checking for unistd.h... (cached) yes [ 265s] checking for sys/stat.h... (cached) yes [ 265s] checking for sys/mman.h... yes [ 265s] checking for sys/time.h... yes [ 265s] checking for sys/timeb.h... yes [ 266s] checking for sys/random.h... yes [ 266s] checking for dl.h... no [ 266s] checking for dlfcn.h... (cached) yes [ 266s] checking for glob.h... yes [ 266s] checking for gettimeofday... yes [ 267s] checking for ftime... yes [ 267s] checking for stat... yes [ 267s] checking for mmap... yes [ 267s] checking for munmap... yes [ 267s] checking for armv7l-tizen-linux-gnueabi-clang options needed to detect all undeclared functions... none needed [ 267s] checking whether getentropy is declared... yes [ 267s] checking for sys/socket.h... yes [ 267s] checking for netinet/in.h... yes [ 268s] checking for arpa/inet.h... yes [ 268s] checking for netdb.h... yes [ 268s] checking for sys/select.h... yes [ 268s] checking for poll.h... yes [ 268s] checking for library containing gethostbyname... none required [ 268s] checking for library containing connect... none required [ 268s] checking for type of socket length (socklen_t)... socklen_t * [ 268s] checking whether to enable IPv6... yes [ 269s] checking whether __attribute__((destructor)) is accepted... yes [ 269s] checking whether the linker accepts -Wl,--undefined-version... yes [ 269s] Enabling HTTP support [ 269s] checking for python version... 3.13 [ 270s] checking for python platform... linux [ 270s] checking for GNU default python prefix... ${prefix} [ 270s] checking for GNU default python exec_prefix... ${exec_prefix} [ 271s] checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.13/site-packages [ 272s] checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.13/site-packages [ 272s] checking for python-3.13... yes [ 272s] checking for library containing dlopen... none required [ 272s] checking for pthread.h... yes [ 272s] checking for library containing pthread_create... none required [ 272s] Enabling xmllint shell history [ 272s] checking for tputs in -lncurses... no [ 272s] checking for tputs in -lcurses... no [ 273s] checking for tputs in -ltermcap... no [ 273s] checking for tputs in -lterminfo... no [ 273s] checking for tputs in -ltermlib... no [ 273s] checking for readline/history.h... yes [ 273s] checking for append_history in -lhistory... yes [ 274s] checking for readline/readline.h... yes [ 274s] checking for readline in -lreadline... yes [ 274s] checking for libiconv... none required [ 274s] checking that generated files are newer than configure... done [ 274s] configure: creating ./config.status [ 276s] config.status: creating Makefile [ 276s] config.status: creating include/Makefile [ 276s] config.status: creating include/libxml/Makefile [ 276s] config.status: creating include/private/Makefile [ 276s] config.status: creating doc/Makefile [ 276s] config.status: creating doc/devhelp/Makefile [ 276s] config.status: creating example/Makefile [ 276s] config.status: creating fuzz/Makefile [ 276s] config.status: creating python/Makefile [ 276s] config.status: creating python/tests/Makefile [ 276s] config.status: creating xstc/Makefile [ 277s] config.status: creating include/libxml/xmlversion.h [ 277s] config.status: creating libxml-2.0.pc [ 277s] config.status: creating libxml-2.0-uninstalled.pc [ 277s] config.status: creating libxml2-config.cmake [ 277s] config.status: creating python/setup.py [ 277s] config.status: creating xml2-config [ 277s] config.status: creating config.h [ 277s] config.status: executing depfiles commands [ 278s] config.status: executing libtool commands [ 278s] configure: WARNING: unrecognized options: --with-fexceptions [ 278s] + mkdir .libs [ 278s] + cp -v /usr/lib/libxml2.la . [ 278s] `/usr/lib/libxml2.la' -> `./libxml2.la' [ 278s] + make -C python -j12 [ 278s] make: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 278s] /usr/bin/python3 ./generator.py . [ 281s] Found 1644 functions in libxml2-api.xml [ 281s] Found 53 functions in libxml2-python-api.xml [ 281s] Generated 894 wrapper functions, 593 failed, 210 skipped [ 282s] make all-recursive [ 282s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 282s] Making all in . [ 282s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 282s] CC libxml.lo [ 282s] In file included from libxml.c:15: [ 282s] In file included from /usr/include/python3.13/Python.h:84: [ 282s] In file included from /usr/include/python3.13/floatobject.h:47: [ 282s] /usr/include/python3.13/cpython/floatobject.h:16:12: warning: cast from 'PyObject *' (aka 'struct _object *') to 'PyFloatObject *' increases required alignment from 4 to 8 [-Wcast-align] [ 282s] 16 | return _PyFloat_CAST(op)->ob_fval; [ 282s] | ^~~~~~~~~~~~~~~~~ [ 282s] /usr/include/python3.13/cpython/floatobject.h:11:33: note: expanded from macro '_PyFloat_CAST' [ 282s] 11 | (assert(PyFloat_Check(op)), _Py_CAST(PyFloatObject*, op)) [ 282s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 282s] /usr/include/python3.13/pyport.h:19:31: note: expanded from macro '_Py_CAST' [ 282s] 19 | #define _Py_CAST(type, expr) ((type)(expr)) [ 282s] | ^~~~~~~~~~~~ [ 282s] In file included from libxml.c:15: [ 282s] In file included from /usr/include/python3.13/Python.h:90: [ 282s] In file included from /usr/include/python3.13/dictobject.h:101: [ 282s] /usr/include/python3.13/cpython/dictobject.h:58:10: warning: cast from 'PyObject *' (aka 'struct _object *') to 'PyDictObject *' increases required alignment from 4 to 8 [-Wcast-align] [ 282s] 58 | mp = _Py_CAST(PyDictObject*, op); [ 282s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 282s] /usr/include/python3.13/pyport.h:19:31: note: expanded from macro '_Py_CAST' [ 282s] 19 | #define _Py_CAST(type, expr) ((type)(expr)) [ 282s] | ^~~~~~~~~~~~ [ 283s] 2 warnings generated. [ 283s] CC types.lo [ 283s] In file included from types.c:9: [ 283s] In file included from ./libxml_wrap.h:1: [ 283s] In file included from /usr/include/python3.13/Python.h:84: [ 283s] In file included from /usr/include/python3.13/floatobject.h:47: [ 283s] /usr/include/python3.13/cpython/floatobject.h:16:12: warning: cast from 'PyObject *' (aka 'struct _object *') to 'PyFloatObject *' increases required alignment from 4 to 8 [-Wcast-align] [ 283s] 16 | return _PyFloat_CAST(op)->ob_fval; [ 283s] | ^~~~~~~~~~~~~~~~~ [ 283s] /usr/include/python3.13/cpython/floatobject.h:11:33: note: expanded from macro '_PyFloat_CAST' [ 283s] 11 | (assert(PyFloat_Check(op)), _Py_CAST(PyFloatObject*, op)) [ 283s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 283s] /usr/include/python3.13/pyport.h:19:31: note: expanded from macro '_Py_CAST' [ 283s] 19 | #define _Py_CAST(type, expr) ((type)(expr)) [ 283s] | ^~~~~~~~~~~~ [ 283s] In file included from types.c:9: [ 283s] In file included from ./libxml_wrap.h:1: [ 283s] In file included from /usr/include/python3.13/Python.h:90: [ 283s] In file included from /usr/include/python3.13/dictobject.h:101: [ 283s] /usr/include/python3.13/cpython/dictobject.h:58:10: warning: cast from 'PyObject *' (aka 'struct _object *') to 'PyDictObject *' increases required alignment from 4 to 8 [-Wcast-align] [ 283s] 58 | mp = _Py_CAST(PyDictObject*, op); [ 283s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 283s] /usr/include/python3.13/pyport.h:19:31: note: expanded from macro '_Py_CAST' [ 283s] 19 | #define _Py_CAST(type, expr) ((type)(expr)) [ 283s] | ^~~~~~~~~~~~ [ 283s] 2 warnings generated. [ 283s] CC libxml2-py.lo [ 284s] In file included from libxml2-py.c:4: [ 284s] In file included from /usr/include/python3.13/Python.h:84: [ 284s] In file included from /usr/include/python3.13/floatobject.h:47: [ 284s] /usr/include/python3.13/cpython/floatobject.h:16:12: warning: cast from 'PyObject *' (aka 'struct _object *') to 'PyFloatObject *' increases required alignment from 4 to 8 [-Wcast-align] [ 284s] 16 | return _PyFloat_CAST(op)->ob_fval; [ 284s] | ^~~~~~~~~~~~~~~~~ [ 284s] /usr/include/python3.13/cpython/floatobject.h:11:33: note: expanded from macro '_PyFloat_CAST' [ 284s] 11 | (assert(PyFloat_Check(op)), _Py_CAST(PyFloatObject*, op)) [ 284s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 284s] /usr/include/python3.13/pyport.h:19:31: note: expanded from macro '_Py_CAST' [ 284s] 19 | #define _Py_CAST(type, expr) ((type)(expr)) [ 284s] | ^~~~~~~~~~~~ [ 284s] In file included from libxml2-py.c:4: [ 284s] In file included from /usr/include/python3.13/Python.h:90: [ 284s] In file included from /usr/include/python3.13/dictobject.h:101: [ 284s] /usr/include/python3.13/cpython/dictobject.h:58:10: warning: cast from 'PyObject *' (aka 'struct _object *') to 'PyDictObject *' increases required alignment from 4 to 8 [-Wcast-align] [ 284s] 58 | mp = _Py_CAST(PyDictObject*, op); [ 284s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 284s] /usr/include/python3.13/pyport.h:19:31: note: expanded from macro '_Py_CAST' [ 284s] 19 | #define _Py_CAST(type, expr) ((type)(expr)) [ 284s] | ^~~~~~~~~~~~ [ 286s] 2 warnings generated. [ 286s] CCLD libxml2mod.la [ 286s] armv7l-tizen-linux-gnueabi-clang: warning: argument unused during compilation: '-Wa,-mimplicit-it=thumb' [-Wunused-command-line-argument] [ 286s] cat ./libxml.py `test -f libxml2class.py || echo ./`libxml2class.py > libxml2.py [ 286s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 286s] Making all in tests [ 286s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 286s] make[2]: Nothing to be done for 'all'. [ 286s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 286s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 286s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 286s] + exit 0 [ 286s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.1BfRsM [ 286s] + umask 022 [ 286s] + cd /home/abuild/rpmbuild/BUILD [ 286s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm [ 286s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm [ 286s] + cd python3-libxml2-2.13.5 [ 286s] + export AR=llvm-ar RANLIB=llvm-ranlib [ 286s] + AR=llvm-ar [ 286s] + RANLIB=llvm-ranlib [ 286s] + export CC=armv7l-tizen-linux-gnueabi-clang CXX=armv7l-tizen-linux-gnueabi-clang++ [ 286s] + CC=armv7l-tizen-linux-gnueabi-clang [ 286s] + CXX=armv7l-tizen-linux-gnueabi-clang++ [ 286s] + make -C python install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm pythondir=/usr/lib/python3.13/site-packages PYTHON_SITE_PACKAGES=/usr/lib/python3.13/site-packages [ 286s] make: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 286s] make install-recursive [ 286s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 286s] Making install in . [ 286s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 286s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 286s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages' [ 286s] /bin/sh ../libtool --mode=install /bin/install -c libxml2mod.la '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages' [ 286s] libtool: install: /bin/install -c .libs/libxml2mod.so /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages/libxml2mod.so [ 286s] libtool: install: /bin/install -c .libs/libxml2mod.lai /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages/libxml2mod.la [ 286s] libtool: warning: remember to run 'libtool --finish /usr/lib/python3.13/site-packages' [ 286s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages' [ 286s] /bin/install -c -m 644 libxml2.py '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages' [ 287s] Byte-compiling python modules... [ 288s] libxml2.py [ 289s] Byte-compiling python modules (optimized versions) ... [ 290s] libxml2.py [ 290s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages' [ 290s] /bin/install -c -m 644 drv_libxml2.py '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages' [ 290s] Byte-compiling python modules... [ 291s] drv_libxml2.py [ 291s] Byte-compiling python modules (optimized versions) ... [ 291s] drv_libxml2.py [ 291s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 291s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 291s] Making install in tests [ 291s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 291s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 291s] make[3]: Nothing to be done for 'install-exec-am'. [ 291s] make[3]: Nothing to be done for 'install-data-am'. [ 291s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 291s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 291s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 291s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 291s] + chmod a-x python/tests/attribs.py python/tests/build.py python/tests/compareNodes.py python/tests/ctxterror.py python/tests/cutnpaste.py python/tests/dtdvalid.py python/tests/error.py python/tests/inbuf.py python/tests/indexes.py python/tests/input_callback.py python/tests/nsdel.py python/tests/outbuf.py python/tests/push.py python/tests/pushSAX.py python/tests/pushSAXhtml.py python/tests/reader.py python/tests/reader2.py python/tests/reader3.py python/tests/reader4.py python/tests/reader5.py python/tests/reader6.py python/tests/reader7.py python/tests/reader8.py python/tests/readererr.py python/tests/readernext.py python/tests/regexp.py python/tests/relaxng.py python/tests/resolver.py python/tests/schema.py python/tests/serialize.py python/tests/setup_test.py python/tests/sync.py python/tests/thread2.py python/tests/tst.py python/tests/tstLastError.py python/tests/tstURI.py python/tests/tstmem.py python/tests/tstxpath.py python/tests/validDTD.py python/tests/validRNG.py python/tests/validSchemas.py python/tests/validate.py python/tests/walker.py python/tests/xpath.py python/tests/xpathext.py python/tests/xpathleak.py python/tests/xpathns.py python/tests/xpathret.py [ 291s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/share/doc [ 291s] + rm -f /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages/libxml2mod.la '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages/*.a' [ 291s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.13.5-1.1 --unique-debug-src-base python3-libxml2-2.13.5-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 292s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages/libxml2mod.so [ 292s] *** WARNING: No build ID note found in /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages/libxml2mod.so [ 292s] 2033 blocks [ 293s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python3-libxml2-debuginfo.manifest [ 293s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python3-libxml2-debugsource.manifest [ 293s] + /usr/lib/rpm/check-buildroot [ 293s] + /usr/lib/rpm//brp-compress [ 293s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 293s] + /usr/lib/rpm/brp-python-hardlink [ 293s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm [ 293s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/isu.list [ 293s] ~/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm ~/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 293s] ~/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 293s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 294s] Processing files: python3-libxml2-2.13.5-1.1.armv7l [ 294s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 294s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 294s] [ 294s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.h69Qm4 [ 294s] + umask 022 [ 294s] + cd /home/abuild/rpmbuild/BUILD [ 294s] + cd python3-libxml2-2.13.5 [ 294s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/share/doc/packages/python3-libxml2 [ 294s] + export LC_ALL=C [ 294s] + LC_ALL=C [ 294s] + export DOCDIR [ 294s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/share/doc/packages/python3-libxml2 [ 294s] + cp -pr python/libxml2class.txt /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/share/doc/packages/python3-libxml2 [ 294s] + cp -pr python/tests /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/share/doc/packages/python3-libxml2 [ 294s] + exit 0 [ 294s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.uQXP50 [ 294s] + umask 022 [ 294s] + cd /home/abuild/rpmbuild/BUILD [ 294s] + cd python3-libxml2-2.13.5 [ 294s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/share/licenses/python3-libxml2 [ 294s] + export LC_ALL=C [ 294s] + LC_ALL=C [ 294s] + export LICENSEDIR [ 294s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/share/licenses/python3-libxml2 [ 294s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/share/licenses/python3-libxml2 [ 294s] + exit 0 [ 294s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages/libxml2mod.so [ 294s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/python3.13/site-packages/libxml2mod.so [ 294s] warning: File listed twice: /usr/lib/python3.13/site-packages/libxml2mod.so [ 294s] Provides: libxml2-python3 = 2.13.5 libxml2mod.so python3-libxml2 = 2.13.5-1.1 python3-libxml2(armv7l-32) = 2.13.5-1.1 [ 294s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 294s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.28) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.5.0) libxml2.so.2(LIBXML2_2.5.2) libxml2.so.2(LIBXML2_2.5.4) libxml2.so.2(LIBXML2_2.5.6) libxml2.so.2(LIBXML2_2.5.7) libxml2.so.2(LIBXML2_2.5.8) libxml2.so.2(LIBXML2_2.5.9) libxml2.so.2(LIBXML2_2.6.0) libxml2.so.2(LIBXML2_2.6.1) libxml2.so.2(LIBXML2_2.6.10) libxml2.so.2(LIBXML2_2.6.11) libxml2.so.2(LIBXML2_2.6.12) libxml2.so.2(LIBXML2_2.6.14) libxml2.so.2(LIBXML2_2.6.15) libxml2.so.2(LIBXML2_2.6.16) libxml2.so.2(LIBXML2_2.6.17) libxml2.so.2(LIBXML2_2.6.18) libxml2.so.2(LIBXML2_2.6.2) libxml2.so.2(LIBXML2_2.6.20) libxml2.so.2(LIBXML2_2.6.21) libxml2.so.2(LIBXML2_2.6.23) libxml2.so.2(LIBXML2_2.6.25) libxml2.so.2(LIBXML2_2.6.27) libxml2.so.2(LIBXML2_2.6.28) libxml2.so.2(LIBXML2_2.6.3) libxml2.so.2(LIBXML2_2.6.5) libxml2.so.2(LIBXML2_2.6.6) libxml2.so.2(LIBXML2_2.6.8) libxml2.so.2(LIBXML2_2.7.0) libxml2.so.2(LIBXML2_2.7.3) libxml2.so.2(LIBXML2_2.8.0) libxml2.so.2(LIBXML2_2.9.0) libxml2.so.2(LIBXML2_2.9.1) libxml2.so.2(LIBXML2_2.9.11) rtld(GNU_HASH) [ 294s] Obsoletes: libxml2-python3 < 2.13.5 [ 294s] Processing files: python3-libxml2-debugsource-2.13.5-1.1.armv7l [ 294s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 294s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 294s] [ 294s] Provides: python3-libxml2-debugsource = 2.13.5-1.1 python3-libxml2-debugsource(armv7l-32) = 2.13.5-1.1 [ 294s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 294s] Processing files: python3-libxml2-debuginfo-2.13.5-1.1.armv7l [ 294s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 294s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 294s] [ 294s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm/usr/lib/debug/usr/lib/python3.13/site-packages/libxml2mod.so.debug [ 294s] Provides: python3-libxml2-debuginfo = 2.13.5-1.1 python3-libxml2-debuginfo(armv7l-32) = 2.13.5-1.1 [ 294s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 294s] Recommends: python3-libxml2-debugsource(armv7l-32) = 2.13.5-1.1 [ 294s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm [ 294s] sh: --version: command not found [ 294s] rpm: no arguments given for query [ 295s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-libxml2-2.13.5-1.1.src.rpm [ 295s] sh: --version: command not found [ 295s] rpm: no arguments given for query [ 295s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python3-libxml2-2.13.5-1.1.armv7l.rpm [ 295s] sh: --version: command not found [ 295s] rpm: no arguments given for query [ 295s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python3-libxml2-debugsource-2.13.5-1.1.armv7l.rpm [ 295s] sh: --version: command not found [ 295s] rpm: no arguments given for query [ 296s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python3-libxml2-debuginfo-2.13.5-1.1.armv7l.rpm [ 296s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.qd8cjs [ 296s] + umask 022 [ 296s] + cd /home/abuild/rpmbuild/BUILD [ 296s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm [ 296s] + cd python3-libxml2-2.13.5 [ 296s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.1.arm [ 296s] + exit 0 [ 296s] ... checking for files with abuild user/group [ 296s] ... creating baselibs [ 297s] [ 297s] a1317485cc65 finished "build python3-libxml2.spec" at Sat Sep 13 20:44:31 UTC 2025. [ 297s] Retried build at Sat Sep 13 22:40:36 2025 returned same result, skipped