[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] c475181e5050 started "build python3-libxml2.spec" at Fri Jan 9 10:21:40 UTC 2026. [ 0s] [ 0s] Building python3-libxml2 for project 'Tizen-Base-Toolchain' repository 'standard' arch 'aarch64' srcmd5 '970d2d0bbdce2b433057d5956cb9196e' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28/.build-srcdir/python3-libxml2.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28/.build-srcdir/python3-libxml2.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/28/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28/.build-srcdir/python3-libxml2.spec build ... [ 1s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/44] preinstalling libmagic-data... [ 2s] [2/44] preinstalling libncurses... [ 2s] [3/44] preinstalling setup... [ 2s] [4/44] preinstalling filesystem... [ 2s] [5/44] preinstalling glibc... [ 2s] [6/44] preinstalling bash... [ 2s] [7/44] preinstalling diffutils... [ 2s] [8/44] preinstalling grep... [ 2s] [9/44] preinstalling libattr... [ 3s] [10/44] preinstalling libblkid... [ 3s] [11/44] preinstalling libbz2... [ 3s] [12/44] preinstalling libcap... [ 3s] [13/44] preinstalling libfreebl3... [ 3s] [14/44] preinstalling libgcc... [ 3s] [15/44] preinstalling liblua... [ 3s] [16/44] preinstalling liblzma... [ 3s] [17/44] preinstalling libopenssl3... [ 3s] [18/44] preinstalling libpopt... [ 3s] [19/44] preinstalling libreadline... [ 3s] [20/44] preinstalling libsmack... [ 3s] [21/44] preinstalling libsqlite... [ 4s] [22/44] preinstalling libuuid... [ 4s] [23/44] preinstalling libxcrypt... [ 4s] [24/44] preinstalling libxml2... [ 4s] [25/44] preinstalling libzstd1... [ 4s] [26/44] preinstalling nspr... [ 4s] [27/44] preinstalling sed... [ 4s] [28/44] preinstalling zlib... [ 4s] [29/44] preinstalling clang-accel-x86_64-aarch64... [ 22s] [30/44] preinstalling qemu-accel-x86_64-aarch64... [ 47s] [31/44] preinstalling qemu-linux-user-x86_64-cross... [ 60s] [32/44] preinstalling coreutils... [ 60s] [33/44] preinstalling libacl... [ 60s] [34/44] preinstalling libelf... [ 60s] [35/44] preinstalling libmount... [ 60s] [36/44] preinstalling smack... [ 60s] [37/44] preinstalling bzip2... [ 60s] [38/44] preinstalling libmagic... [ 60s] [39/44] preinstalling tar... [ 60s] [40/44] preinstalling util-linux... [ 61s] [41/44] preinstalling rpm... [ 62s] [42/44] preinstalling util-linux-su... [ 62s] [43/44] preinstalling nss... [ 62s] [44/44] preinstalling libsoftokn3... [ 62s] running qemu-linux-user-x86_64-cross postinstall script [ 62s] running qemu-accel-x86_64-aarch64 postinstall script [ 63s] mv: cannot stat `/usr/lib64/gcc/aarch64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 63s] running clang-accel-x86_64-aarch64 postinstall script [ 63s] running setup postinstall script [ 63s] chroot: failed to run command '': No such file or directory [ 63s] initializing rpm db... [ 63s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 63s] breaking dependency libxcrypt-devel -> glibc-devel [ 63s] cycle: libsoftokn3 -> nss [ 63s] breaking dependency nss -> libsoftokn3 [ 63s] cycle: llvm -> clang [ 63s] breaking dependency llvm -> clang [ 63s] cycle: llvm -> lldb -> clang [ 63s] breaking dependency llvm -> lldb [ 63s] done [ 63s] querying package ids... [ 64s] [1/117] cumulate libmagic-data-5.46-1.19 [ 64s] [2/117] cumulate setup-0.9-1.6 [ 64s] [3/117] cumulate filesystem-3.1-1.1 [ 64s] [4/117] cumulate glibc-2.40-1.18 [ 64s] [5/117] cumulate bash-3.2.57-1.1 [ 64s] [6/117] cumulate cpio-2.8-1.1 [ 64s] [7/117] cumulate diffutils-3.10-1.1 [ 64s] [8/117] cumulate findutils-4.3.8-1.23 [ 64s] [9/117] cumulate gdbm-1.8.3-1.24 [ 64s] [10/117] cumulate hostname-3.23-1.1 [ 64s] [11/117] cumulate libatomic-14.2.0-2.3 [ 64s] [12/117] cumulate libattr-2.5.1-1.23 [ 64s] [13/117] cumulate libblkid-2.41.2-1.15 [ 64s] [14/117] cumulate libbz2-1.0.8-1.23 [ 64s] [15/117] cumulate libcap-2.73-1.17 [ 64s] [16/117] cumulate libexpat-2.7.3-1.21 [ 64s] [17/117] cumulate libffi-3.4.7-1.19 [ 64s] [18/117] cumulate libfreebl3-3.109-1.7 [ 64s] [19/117] cumulate libgcc-14.2.0-2.3 [ 64s] [20/117] cumulate libgomp-14.2.0-2.3 [ 64s] [21/117] cumulate libitm-14.2.0-2.3 [ 64s] [22/117] cumulate libltdl-2.5.4-2.8 [ 64s] [23/117] cumulate liblua-5.1.5-1.21 [ 64s] [24/117] cumulate liblzma-5.8.1-4.5 [ 64s] [25/117] cumulate libopenssl3-3.0.18-1.23 [ 64s] [26/117] cumulate libpcre-8.45-1.19 [ 64s] [27/117] cumulate libpopt-1.16-1.20 [ 64s] [28/117] cumulate libpython3_131_0-3.13.1-1.16 [ 64s] [29/117] cumulate libsmack-1.3.1-1.19 [ 64s] [30/117] cumulate libsmartcols-2.41.2-1.15 [ 64s] [31/117] cumulate libsqlite-3.51.0-1.24 [ 64s] [32/117] cumulate libuuid-2.41.2-1.15 [ 64s] [33/117] cumulate libxcrypt-4.4.36-1.21 [ 64s] [34/117] cumulate libxml2-2.13.5-1.20 [ 64s] [35/117] cumulate libzstd1-1.5.7-1.16 [ 64s] [36/117] cumulate m4-1.4.20-1.1 [ 64s] [37/117] cumulate net-tools-2.0_20121208git-1.18 [ 64s] [38/117] cumulate nspr-4.36-1.5 [ 64s] [39/117] cumulate patch-2.8-1.15 [ 64s] [40/117] cumulate pkg-config-0.29.2-1.25 [ 64s] [41/117] cumulate sed-4.1c-1.20 [ 64s] [42/117] cumulate update-alternatives-1.22.21-1.1 [ 64s] [43/117] cumulate which-2.17-1.1 [ 64s] [44/117] cumulate zlib-1.3.1-1.25 [ 64s] [45/117] cumulate build-compare-2023.06.18-1.8 [ 64s] [46/117] cumulate clang-accel-x86_64-aarch64-0.4-1.8 [ 64s] [47/117] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 64s] [48/117] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-2.8 [ 64s] [49/117] cumulate binutils-libs-2.43-1.17 [ 64s] [50/117] cumulate coreutils-6.9-14.5 [ 64s] [51/117] cumulate cpp-14.2.0-2.3 [ 64s] [52/117] cumulate gawk-3.1.5-1.1 [ 64s] [53/117] cumulate gcc-c++-14.2.0-2.3 [ 64s] [54/117] cumulate grep-2.5.2-1.15 [ 64s] [55/117] cumulate libacl-2.3.2-1.19 [ 64s] [56/117] cumulate libelf-0.189-1.17 [ 64s] [57/117] cumulate libgfortran-14.2.0-2.3 [ 64s] [58/117] cumulate liblastlog2-2.41.2-1.15 [ 64s] [59/117] cumulate libmount-2.41.2-1.15 [ 64s] [60/117] cumulate libstdc++-14.2.0-2.3 [ 64s] [61/117] cumulate make-4.4.1-1.20 [ 64s] [62/117] cumulate nss-certs-3.109-1.7 [ 64s] [63/117] cumulate smack-1.3.1-1.19 [ 64s] [64/117] cumulate xz-devel-5.8.1-4.5 [ 64s] [65/117] cumulate bzip2-1.0.8-1.23 [ 64s] [66/117] cumulate libfdisk-2.41.2-1.15 [ 64s] [67/117] cumulate libmagic-5.46-1.19 [ 64s] [68/117] cumulate xz-5.8.1-4.5 [ 64s] [69/117] cumulate perl-5.38.0-1.21 [ 64s] [70/117] cumulate build-mkbaselibs-20120927-1.1 [ 64s] [71/117] cumulate libstdc++-devel-14.2.0-2.3 [ 64s] [72/117] cumulate linux-glibc-devel-6.6-1.22 [ 64s] [73/117] cumulate tar-1.17-1.1 [ 64s] [74/117] cumulate terminfo-base-full-6.4-1.21 [ 64s] [75/117] cumulate autoconf-2.71-1.24 [ 64s] [76/117] cumulate file-5.46-1.19 [ 64s] [77/117] cumulate glibc-locale-2.40-1.18 [ 64s] [78/117] cumulate gzip-1.3.12-1.20 [ 64s] [79/117] cumulate libcc1-14.2.0-2.3 [ 64s] [80/117] cumulate binutils-2.43-1.17 [ 64s] [81/117] cumulate pam-1.1.6-1.15 [ 64s] [82/117] cumulate tzdata-2025b-1.1 [ 64s] [83/117] cumulate libdw-0.189-1.17 [ 64s] [84/117] cumulate libllvm-21.1.1-5.1 [ 64s] [85/117] cumulate libarchive-3.8.1-1.17 [ 64s] [86/117] cumulate automake-1.16.5-1.18 [ 64s] [87/117] cumulate libasm-0.189-1.17 [ 64s] [88/117] cumulate libncurses5-6.4-1.21 [ 64s] [89/117] cumulate libncurses6-6.4-1.21 [ 64s] [90/117] cumulate build-20120927-1.1 [ 64s] [91/117] cumulate gcc-14.2.0-2.3 [ 64s] [92/117] cumulate rpm-4.14.1.1-1.17 [ 64s] [93/117] cumulate libncurses-6.4-1.21 [ 64s] [94/117] cumulate less-685-1.1 [ 64s] [95/117] cumulate libreadline-5.2-1.21 [ 64s] [96/117] cumulate qemu-accel-x86_64-aarch64-0.4-1.8 [ 64s] [97/117] cumulate libtool-2.5.4-2.8 [ 64s] [98/117] cumulate ncurses-devel-6.4-1.21 [ 64s] [99/117] cumulate elfutils-0.189-1.17 [ 64s] [100/117] cumulate readline-devel-5.2-1.21 [ 64s] [101/117] cumulate libxml2-tools-2.13.5-1.20 [ 64s] [102/117] cumulate python3-base-3.13.1-1.16 [ 64s] [103/117] cumulate util-linux-2.41.2-1.15 [ 64s] [104/117] cumulate python3-3.13.1-1.17 [ 64s] [105/117] cumulate util-linux-su-2.41.2-1.15 [ 64s] [106/117] cumulate python3-devel-3.13.1-1.16 [ 64s] [107/117] cumulate libxcrypt-devel-4.4.36-1.21 [ 64s] [108/117] cumulate nss-3.109-1.7 [ 64s] [109/117] cumulate llvm-21.1.1-5.1 [ 64s] [110/117] cumulate glibc-devel-2.40-1.18 [ 64s] [111/117] cumulate libsoftokn3-3.109-1.7 [ 64s] [112/117] cumulate llvm-devel-21.1.1-5.1 [ 64s] [113/117] cumulate clang-21.1.1-5.1 [ 64s] [114/117] cumulate zlib-devel-1.3.1-1.25 [ 64s] [115/117] cumulate lldb-21.1.1-5.1 [ 64s] [116/117] cumulate rpm-build-4.14.1.1-1.17 [ 64s] [117/117] cumulate libxml2-devel-2.13.5-1.20 [ 64s] now installing cumulated packages [ 89s] Preparing... ######################################## [ 89s] Updating / installing... [ 89s] setup-0.9-1.6 ######################################## [ 89s] filesystem-3.1-1.1 ######################################## [ 90s] glibc-2.40-1.18 ######################################## [ 90s] bash-3.2.57-1.1 ######################################## [ 90s] zlib-1.3.1-1.25 ######################################## [ 91s] libgcc-14.2.0-2.3 ######################################## [ 91s] libstdc++-14.2.0-2.3 ######################################## [ 93s] coreutils-6.9-14.5 ######################################## [ 93s] liblzma-5.8.1-4.5 ######################################## [ 93s] libxml2-2.13.5-1.20 ######################################## [ 94s] libbz2-1.0.8-1.23 ######################################## [ 94s] pkg-config-0.29.2-1.25 ######################################## [ 94s] libelf-0.189-1.17 ######################################## [ 94s] libdw-0.189-1.17 ######################################## [ 100s] libllvm-21.1.1-5.1 ######################################## [ 100s] libxcrypt-4.4.36-1.21 ######################################## [ 101s] libblkid-2.41.2-1.15 ######################################## [ 101s] libopenssl3-3.0.18-1.23 ######################################## [ 101s] libsqlite-3.51.0-1.24 ######################################## [ 102s] nspr-4.36-1.5 ######################################## [ 102s] pam-1.1.6-1.15 ######################################## [ 103s] terminfo-base-full-6.4-1.21 ######################################## [ 103s] libncurses6-6.4-1.21 ######################################## [ 103s] libreadline-5.2-1.21 ######################################## [ 103s] gdbm-1.8.3-1.24 ######################################## [ 112s] perl-5.38.0-1.21 ######################################## [ 112s] libfreebl3-3.109-1.7 ######################################## [ 113s] libpopt-1.16-1.20 ######################################## [ 113s] libpython3_131_0-3.13.1-1.16 ######################################## [ 113s] libuuid-2.41.2-1.15 ######################################## [ 114s] libfdisk-2.41.2-1.15 ######################################## [ 114s] build-mkbaselibs-20120927-1.1 ######################################## [ 114s] libxml2-tools-2.13.5-1.20 ######################################## [ 129s] clang-21.1.1-5.1 ######################################## [ 130s] lldb-21.1.1-5.1 ######################################## [ 135s] llvm-21.1.1-5.1 ######################################## [ 135s] libncurses5-6.4-1.21 ######################################## [ 136s] ncurses-devel-6.4-1.21 ######################################## [ 136s] readline-devel-5.2-1.21 ######################################## [ 136s] nss-certs-3.109-1.7 ######################################## [ 136s] libsoftokn3-3.109-1.7 ######################################## [ 136s] nss-3.109-1.7 ######################################## [ 137s] liblastlog2-2.41.2-1.15 ######################################## [ 137s] libmount-2.41.2-1.15 ######################################## [ 137s] libasm-0.189-1.17 ######################################## [ 137s] xz-devel-5.8.1-4.5 ######################################## [ 137s] bzip2-1.0.8-1.23 ######################################## [ 137s] xz-5.8.1-4.5 ######################################## [ 138s] linux-glibc-devel-6.6-1.22 ######################################## [ 138s] libxcrypt-devel-4.4.36-1.21 ######################################## [ 138s] glibc-devel-2.40-1.18 ######################################## [ 138s] zlib-devel-1.3.1-1.25 ######################################## [ 138s] gzip-1.3.12-1.20 ######################################## [ 138s] libcc1-14.2.0-2.3 ######################################## [ 138s] libgfortran-14.2.0-2.3 ######################################## [ 139s] binutils-libs-2.43-1.17 ######################################## [ 142s] binutils-2.43-1.17 ######################################## [ 142s] make-4.4.1-1.20 ######################################## [ 142s] findutils-4.3.8-1.23 ######################################## [ 142s] libatomic-14.2.0-2.3 ######################################## [ 142s] libattr-2.5.1-1.23 ######################################## [ 142s] libacl-2.3.2-1.19 ######################################## [ 142s] tar-1.17-1.1 ######################################## [ 142s] libarchive-3.8.1-1.17 ######################################## [ 143s] libcap-2.73-1.17 ######################################## [ 143s] libexpat-2.7.3-1.21 ######################################## [ 143s] libffi-3.4.7-1.19 ######################################## [ 147s] python3-base-3.13.1-1.16 ######################################## [ 147s] libgomp-14.2.0-2.3 ######################################## [ 147s] libitm-14.2.0-2.3 ######################################## [ 154s] gcc-14.2.0-2.3 ######################################## [ 154s] libltdl-2.5.4-2.8 ######################################## [ 154s] liblua-5.1.5-1.21 ######################################## [ 154s] libpcre-8.45-1.19 ######################################## [ 155s] libsmack-1.3.1-1.19 ######################################## [ 155s] libsmartcols-2.41.2-1.15 ######################################## [ 155s] libzstd1-1.5.7-1.16 ######################################## [ 155s] m4-1.4.20-1.1 ######################################## [ 155s] autoconf-2.71-1.24 ######################################## [ 156s] automake-1.16.5-1.18 ######################################## [ 156s] patch-2.8-1.15 ######################################## [ 156s] sed-4.1c-1.20 ######################################## [ 158s] util-linux-2.41.2-1.15 ######################################## [ 158s] libmagic-data-5.46-1.19 ######################################## [ 159s] libmagic-5.46-1.19 ######################################## [ 160s] rpm-4.14.1.1-1.17 ######################################## [ 160s] rpm-build-4.14.1.1-1.17 ######################################## [ 160s] file-5.46-1.19 ######################################## [ 160s] util-linux-su-2.41.2-1.15 ######################################## [ 160s] libtool-2.5.4-2.8 ######################################## [ 160s] smack-1.3.1-1.19 ######################################## [ 160s] grep-2.5.2-1.15 ######################################## [ 183s] qemu-accel-x86_64-aarch64-0.4-1.8 ######################################## [ 184s] python3-3.13.1-1.17 ######################################## [ 184s] python3-devel-3.13.1-1.16 ######################################## [ 184s] build-20120927-1.1 ######################################## [ 184s] libxml2-devel-2.13.5-1.20 ######################################## [ 184s] elfutils-0.189-1.17 ######################################## [ 187s] llvm-devel-21.1.1-5.1 ######################################## [ 187s] libncurses-6.4-1.21 ######################################## [ 187s] less-685-1.1 ######################################## [ 190s] glibc-locale-2.40-1.18 ######################################## [ 190s] tzdata-2025b-1.1 ######################################## [ 192s] libstdc++-devel-14.2.0-2.3 ######################################## [ 195s] cpp-14.2.0-2.3 ######################################## [ 199s] gcc-c++-14.2.0-2.3 ######################################## [ 199s] build-compare-2023.06.18-1.8 ######################################## [ 217s] clang-accel-x86_64-aarch64-0.4-1.8 ######################################## [ 217s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 229s] qemu-linux-user-x86_64-cross-9.2.3.1-2######################################## [ 230s] gawk-3.1.5-1.1 ######################################## [ 230s] cpio-2.8-1.1 ######################################## [ 230s] diffutils-3.10-1.1 ######################################## [ 230s] hostname-3.23-1.1 ######################################## [ 230s] net-tools-2.0_20121208git-1.18 ######################################## [ 230s] update-alternatives-1.22.21-1.1 ######################################## [ 230s] which-2.17-1.1 ######################################## [ 231s] now finalizing build dir... [ 232s] ----------------------------------------------------------------- [ 232s] I have the following modifications for python3-libxml2.spec: [ 232s] 4c4 [ 232s] < Release: 0 [ 232s] --- [ 232s] > Release: 1.6 [ 233s] build target is aarch64-tizen-linux [ 233s] ----------------------------------------------------------------- [ 233s] ----- building python3-libxml2.spec (user abuild) [ 233s] ----------------------------------------------------------------- [ 233s] ----------------------------------------------------------------- [ 233s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/970d2d0bbdce2b433057d5956cb9196e-python3-libxml2' /home/abuild/rpmbuild/SOURCES/python3-libxml2.spec [ 233s] Building target platforms: aarch64-tizen-linux [ 233s] Building for target aarch64-tizen-linux [ 233s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.RnqVI3 [ 233s] + umask 022 [ 233s] + cd /home/abuild/rpmbuild/BUILD [ 233s] + cd /home/abuild/rpmbuild/BUILD [ 233s] + rm -rf python3-libxml2-2.13.5 [ 233s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python3-libxml2-2.13.5.tar.gz [ 233s] + /bin/tar -xof - [ 237s] + STATUS=0 [ 237s] + '[' 0 -ne 0 ']' [ 237s] + cd python3-libxml2-2.13.5 [ 237s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 237s] + echo 'Patch #0 (0001-Bump-to-2.13.5.patch):' [ 237s] Patch #0 (0001-Bump-to-2.13.5.patch): [ 237s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 237s] patching file .gitignore [ 237s] + cp /home/abuild/rpmbuild/SOURCES/python3-libxml2.manifest . [ 237s] + exit 0 [ 237s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.qORy8M [ 237s] + umask 022 [ 237s] + cd /home/abuild/rpmbuild/BUILD [ 237s] + CFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a53 -g' [ 237s] + export CFLAGS [ 237s] + CXXFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a53 -g' [ 237s] + export CXXFLAGS [ 237s] + LDFLAGS=-Wl,-z,relro,--as-needed [ 237s] + export LDFLAGS [ 237s] + cd python3-libxml2-2.13.5 [ 237s] + ref=/usr/lib/rpm [ 237s] + mints=0 [ 237s] + case $(uname -m) in [ 237s] ++ uname -m [ 237s] + mints=20120610 [ 237s] + for s in guess sub [ 237s] ++ find -maxdepth 8 -name config.guess [ 237s] + for s in guess sub [ 237s] ++ find -maxdepth 8 -name config.sub [ 237s] + export AR=llvm-ar RANLIB=llvm-ranlib [ 237s] + AR=llvm-ar [ 237s] + RANLIB=llvm-ranlib [ 237s] + export CC=aarch64-tizen-linux-gnu-clang CXX=aarch64-tizen-linux-gnu-clang++ [ 237s] + CC=aarch64-tizen-linux-gnu-clang [ 237s] + CXX=aarch64-tizen-linux-gnu-clang++ [ 237s] + export 'CFLAGS=-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a53 -g -fno-strict-aliasing' [ 237s] + CFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a53 -g -fno-strict-aliasing' [ 237s] + export PYTHON=/usr/bin/python3 [ 237s] + PYTHON=/usr/bin/python3 [ 237s] + CFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a53 -g -fno-strict-aliasing' [ 237s] + export CFLAGS [ 237s] + CXXFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a53 -g' [ 237s] + export CXXFLAGS [ 237s] + LDFLAGS=-Wl,-z,relro,--as-needed [ 237s] + export LDFLAGS [ 237s] + ./autogen.sh --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 246s] libtoolize: putting auxiliary files in '.'. [ 246s] libtoolize: copying file './ltmain.sh' [ 246s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 246s] libtoolize: copying file 'm4/libtool.m4' [ 246s] libtoolize: copying file 'm4/ltoptions.m4' [ 246s] libtoolize: copying file 'm4/ltsugar.m4' [ 247s] libtoolize: copying file 'm4/ltversion.m4' [ 247s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 259s] configure.ac:47: installing './compile' [ 259s] configure.ac:12: installing './config.guess' [ 259s] configure.ac:12: installing './config.sub' [ 259s] configure.ac:42: installing './install-sh' [ 259s] configure.ac:42: installing './missing' [ 259s] Makefile.am: installing './depcomp' [ 262s] python/Makefile.am:31: installing './py-compile' [ 263s] checking build system type... aarch64-tizen-linux-gnu [ 263s] checking host system type... aarch64-tizen-linux-gnu [ 263s] checking for a BSD-compatible install... /bin/install -c [ 263s] checking whether build environment is sane... yes [ 263s] checking for a race-free mkdir -p... /bin/mkdir -p [ 263s] checking for gawk... gawk [ 263s] checking whether make sets $(MAKE)... yes [ 263s] checking whether make supports nested variables... yes [ 263s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 263s] checking whether make supports nested variables... (cached) yes [ 263s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-clang [ 264s] checking whether the C compiler works... no [ 264s] configure: error: in `/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5': [ 264s] configure: error: C compiler cannot create executables [ 264s] See `config.log' for more details [ 264s] [ 264s] Configure script failed, check config.log for more info. [ 264s] error: Bad exit status from /var/tmp/rpm-tmp.qORy8M (%build) [ 264s] [ 264s] [ 264s] RPM build errors: [ 264s] Bad exit status from /var/tmp/rpm-tmp.qORy8M (%build) [ 264s] [ 264s] c475181e5050 failed "build python3-libxml2.spec" at Fri Jan 9 10:26:04 UTC 2026. [ 264s]