Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_4 Using BUILD_ARCH=armv7el w12 started "build perl-WWW-Curl.spec" at Wed Apr 24 02:53:22 UTC 2013. Building perl-WWW-Curl for project 'Tizen:2.1:Base' repository 'standard' arch 'armv7el' srcmd5 'b4133427617b715c1eeeeb5adb15c2fa' processing specfile /srv/build/root_4/.build-srcdir/perl-WWW-Curl.spec ... running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/perl-WWW-Curl.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/perl-WWW-Curl.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/55] preinstalling nss... [2/55] preinstalling libfile-x86-arm... [3/55] preinstalling elfutils-libelf-x86-arm... [4/55] preinstalling nss-softokn-freebl-x86-arm... [5/55] preinstalling nss-x86-arm... [6/55] preinstalling nspr-x86-arm... [7/55] preinstalling libgcc-x86-arm... [8/55] preinstalling libacl-x86-arm... [9/55] preinstalling libattr-x86-arm... [10/55] preinstalling libcap-x86-arm... [11/55] preinstalling liblua-x86-arm... [12/55] preinstalling popt-x86-arm... [13/55] preinstalling xz-libs-x86-arm... [14/55] preinstalling zlib-x86-arm... [15/55] preinstalling file... [16/55] preinstalling sqlite-x86-arm... [17/55] preinstalling mpfr-x86-arm... [18/55] preinstalling gmp-x86-arm... [19/55] preinstalling mpc-x86-arm... [20/55] preinstalling bzip2-libs-x86-arm... [21/55] preinstalling rpm-x86-arm... [22/55] preinstalling rpm-libs-x86-arm... [23/55] preinstalling tizen-accelerator... [24/55] preinstalling eglibc-x86-arm... [25/55] preinstalling ncurses-libs-x86-arm... [26/55] preinstalling bash-x86-arm... [27/55] preinstalling rpm... [28/55] preinstalling rpm-libs... [29/55] preinstalling setup... [30/55] preinstalling filesystem... [31/55] preinstalling bash... [32/55] preinstalling bzip2... [33/55] preinstalling coreutils... [34/55] preinstalling diffutils... [35/55] preinstalling liblua... [36/55] preinstalling eglibc... [37/55] preinstalling eglibc-common... [38/55] preinstalling libacl... [39/55] preinstalling libattr... [40/55] preinstalling libgcc... [41/55] preinstalling libcap... [42/55] preinstalling popt... [43/55] preinstalling readline... [44/55] preinstalling sed... [45/55] preinstalling tar... [46/55] preinstalling zlib... [47/55] preinstalling sqlite... [48/55] preinstalling ncurses-libs... [49/55] preinstalling elfutils-libelf... [50/55] preinstalling bzip2-libs... [51/55] preinstalling libstdc++... [52/55] preinstalling libfile... [53/55] preinstalling xz-libs... [54/55] preinstalling nspr... [55/55] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: bash -> eglibc -> eglibc-common -> coreutils breaking dependency eglibc-common -> coreutils cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> findutils breaking dependency eglibc-common -> findutils cycle: eglibc -> eglibc-common -> grep breaking dependency grep -> eglibc cycle: eglibc -> eglibc-common -> grep -> libgcc breaking dependency grep -> libgcc cycle: eglibc -> eglibc-common -> grep -> libpcre breaking dependency libpcre -> eglibc cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc breaking dependency libpcre -> libgcc cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ breaking dependency libstdc++ -> eglibc cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc breaking dependency eglibc-common -> grep cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/150] [2/150] installing kernel-headers-2.6.36-1.1 [3/150] installing tizen-release-2.1.0-1.1 [4/150] installing tzdata-2011h-1.1 [5/150] installing libgcc-4.5.3-1.1 [6/150] installing setup-0.1-2.1 [7/150] installing filesystem-0.1-1.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [8/150] installing eglibc-2.13-1.4 [9/150] installing libstdc++-4.5.3-1.1 [10/150] installing eglibc-common-2.13-1.4 /var/tmp/rpm-tmp.nhZ5Il: line 2: /bin/grep: No such file or directory /var/tmp/rpm-tmp.nhZ5Il: line 2: /usr/bin/xargs: No such file or directory [11/150] installing libstdc++-devel-4.5.3-1.1 [12/150] installing bash-4.1-3.1 [13/150] installing bzip2-libs-1.0.5-4.1 [14/150] installing cpio-2.8-3.1 [15/150] installing diffutils-3.0-3.1 [16/150] installing e2fsprogs-libs-1.41.9-2.1 [17/150] installing elfutils-libelf-0.152-1.3 [18/150] installing fdupes-1.40-42.1 [19/150] installing findutils-4.2.31-1.1 [20/150] installing gdbm-1.8.3-1.1 [21/150] installing libattr-2.4.44-7.2 [22/150] installing libgomp-4.5.3-1.1 [23/150] installing libidn-1.15-6.1 [24/150] installing liblua-5.1.4-6.1 [25/150] installing libuuid-2.20.2-1.1 [26/150] installing lzo-2.03-1.1 [27/150] installing m4-1.4.14-1.1 [28/150] installing make-3.81-1.1 [29/150] installing net-tools-1.60-87.1 [30/150] installing nspr-4.8.7-1.3 [31/150] installing nss-softokn-freebl-3.12.9-3.5 [32/150] installing patch-2.6.1.169-1.1 [33/150] installing pkgconfig-0.25-3.1 [34/150] installing popt-1.16-3.1 [35/150] installing readline-5.2-13.1 [36/150] installing sed-4.1.5-2.1 [37/150] installing sqlite-3.7.13-1.1 [38/150] installing xz-libs-5.0.3-1.1 [39/150] installing zlib-1.2.5-2.3 [40/150] installing gmp-5.0.1-1.1 [41/150] installing libpcre-7.7-2.1 [42/150] installing ncurses-libs-5.7-4.1 [43/150] installing build-compare-2009.10.14-26.2 [44/150] installing eglibc-headers-2.13-1.4 [45/150] installing libcap-2.21-1.1 [46/150] installing unzip-6.0-9.2 [47/150] installing zlib-devel-1.2.5-2.3 [48/150] installing c-ares-1.7.4-2.1 [49/150] installing grep-2.5.1a-62.1 [50/150] installing libacl-2.2.49-1.1 [51/150] installing libfile-5.04-1.1 [52/150] installing lzo-minilzo-2.03-1.1 [53/150] installing mpfr-3.0.0-1.1 [54/150] installing ncurses-5.7-4.1 [55/150] installing binutils-2.21.51.20110421-5.1 [56/150] installing bzip2-1.0.5-4.1 [57/150] installing libblkid-2.20.2-1.1 [58/150] installing xz-5.0.3-1.1 [59/150] installing elfutils-libs-0.152-1.3 [60/150] installing nss-3.12.9-3.5 [61/150] installing perl-5.12.1-61.2 [62/150] installing ncurses-base-5.7-4.1 [63/150] installing perl-Devel-Symdump-2.08-5.1 [64/150] installing perl-HTML-Tagset-3.20-8.1 [65/150] installing perl-IO-Compress-Base-2.008-61.2 [66/150] installing perl-Module-Pluggable-3.60-61.2 [67/150] installing perl-Pod-Escapes-1.04-61.2 [68/150] installing perl-TimeDate-1.20-1.1 [69/150] installing c-ares-devel-1.7.4-2.1 [70/150] installing eglibc-devel-2.13-1.4 [71/150] installing lzo-devel-2.03-1.1 [72/150] installing perl-Compress-Raw-Zlib-2.008-61.2 [73/150] installing perl-devel-5.12.1-61.2 [74/150] installing perl-libs-5.12.1-61.2 [75/150] installing tar-1.17-4.1 [76/150] installing coreutils-6.9-9.1 [77/150] installing file-5.04-1.1 [78/150] installing libmount-2.20.2-1.1 [79/150] installing mpc-0.9-1.1 [80/150] installing openssl-1.0.1c-1.6 [81/150] installing xz-lzma-compat-5.0.3-1.1 [82/150] installing elfutils-0.152-1.3 [83/150] installing nss-sysinit-3.12.9-3.5 [84/150] installing openssl-devel-1.0.1c-1.6 [85/150] installing perl-ExtUtils-ParseXS-2.18-61.2 [86/150] installing perl-Pod-Coverage-0.20-1.1 [87/150] installing perl-Pod-Simple-3.07-61.2 [88/150] installing perl-Test-Simple-0.80-61.2 [89/150] installing tizen-accelerator-1.0.1-1.1 [90/150] installing libidn-devel-1.15-6.1 [91/150] installing perl-IO-Compress-Zlib-2.008-61.2 [92/150] installing perl-Test-Harness-3.12-61.2 [93/150] installing gawk-3.1.5-1.1 [94/150] installing gzip-1.3.14-2.1 [95/150] installing build-2011.01.10a-1.1 [96/150] installing libcurl-7.28.1-1.1 [97/150] installing cpp-4.5.3-1.1 [98/150] installing util-linux-2.20.2-1.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [99/150] installing bzip2-libs-x86-arm-1.0.5-8.1 [100/150] installing eglibc-x86-arm-2.13-8.1 [101/150] installing elfutils-libelf-x86-arm-0.152-8.1 [102/150] installing elfutils-libs-x86-arm-0.152-8.2 [103/150] installing gmp-x86-arm-5.0.1-8.1 [104/150] installing libacl-x86-arm-2.2.49-8.1 [105/150] installing libattr-x86-arm-2.4.44-8.1 [106/150] installing libcap-x86-arm-2.21-8.1 [107/150] installing libfile-x86-arm-5.04-8.1 [108/150] installing libgcc-x86-arm-4.5.3-8.1 [109/150] installing liblua-x86-arm-5.1.4-8.1 [110/150] installing mpc-x86-arm-0.9-8.1 [111/150] installing mpfr-x86-arm-3.0.0-8.1 [112/150] installing ncurses-libs-x86-arm-5.7-8.1 [113/150] installing nspr-x86-arm-4.8.7-8.2 [114/150] installing nss-softokn-freebl-x86-arm-3.12.9-8.2 [115/150] installing nss-x86-arm-3.12.9-8.2 [116/150] installing perl-ExtUtils-MakeMaker-6.36-61.2 [117/150] installing perl-Test-Pod-Coverage-1.08-5.1 [118/150] installing popt-x86-arm-1.16-8.1 [119/150] installing sqlite-x86-arm-3.7.13-8.1 [120/150] installing xz-libs-x86-arm-5.0.3-8.1 [121/150] installing zlib-x86-arm-1.2.5-8.1 [122/150] installing libcurl-devel-7.28.1-1.1 [123/150] installing curl-7.28.1-1.1 [124/150] installing gcc-4.5.3-1.1 [125/150] installing perl-CPAN-1.9205-61.2 [126/150] installing bash-x86-arm-4.1-8.1 [127/150] installing fdupes-x86-arm-1.40-8.1 [128/150] installing findutils-x86-arm-4.2.31-8.1 [129/150] installing gawk-x86-arm-3.1.5-8.1 mv: cannot stat `/bin/pgawk-3.1.5': No such file or directory mv: cannot stat `/bin/pgawk': No such file or directory [130/150] installing gzip-x86-arm-1.3.14-8.1 [131/150] installing make-x86-arm-3.81-8.1 [132/150] installing patch-x86-arm-2.6.1.169-8.1 [133/150] installing sed-x86-arm-4.1.5-8.1 [134/150] installing diffutils-x86-arm-3.0-8.1 [135/150] installing autoconf-2.68-1.1 [136/150] installing coreutils-x86-arm-6.9-8.1 [137/150] installing file-x86-arm-5.04-8.1 [138/150] installing tar-x86-arm-1.17-8.1 [139/150] installing elfutils-x86-arm-0.152-8.2 [140/150] installing gcc-c++-4.5.3-1.1 [141/150] installing rpm-4.9.1-4.1 [142/150] installing automake-1.11.1-3.1 [143/150] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.1 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [144/150] installing rpm-libs-4.9.1-4.1 [145/150] installing rpm-libs-x86-arm-4.9.1-8.1 [146/150] installing libtool-2.2.6b-1.1 [147/150] installing cross-armv7l-binutils-accel-armv7l-2.22-1.2 mv: cannot stat `/usr/bin/gprov': No such file or directory [148/150] installing rpm-build-4.9.1-4.1 [149/150] installing rpm-x86-arm-4.9.1-8.1 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [150/150] installing rpm-build-x86-arm-4.9.1-8.1 now finalizing build dir... /var/run/obs/worker/4/build/build: line 1761: /srv/build/root_4/etc/passwd: No such file or directory Warning: spec file parser line 24: can't expand %(...) Warning: spec file parser line 30: can't expand %(...) build target is armv7l-tizen-linux ----------------------------------------------------------------- ----- building perl-WWW-Curl.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.1:Base/standard/b4133427617b715c1eeeeb5adb15c2fa-perl-WWW-Curl' /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.b6VPuq + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf perl-WWW-Curl-4.05 + /usr/bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl-4.05.tar.bz2 + /bin/tar -xvvf - drwxrwxr-x root/root 0 2013-03-12 06:16 perl-WWW-Curl-4.05/ -rw-rw-r-- root/root 11915 2013-03-12 06:16 perl-WWW-Curl-4.05//Changes -rw-rw-r-- root/root 31779 2013-03-12 06:16 perl-WWW-Curl-4.05//Curl.xs -rw-rw-r-- root/root 255 2013-03-12 06:16 perl-WWW-Curl-4.05//LICENSE -rw-rw-r-- root/root 963 2013-03-12 06:16 perl-WWW-Curl-4.05//MANIFEST -rw-rw-r-- root/root 487 2013-03-12 06:16 perl-WWW-Curl-4.05//META.yml -rw-rw-r-- root/root 8543 2013-03-12 06:16 perl-WWW-Curl-4.05//Makefile.PL -rw-rw-r-- root/root 2475 2013-03-12 06:16 perl-WWW-Curl-4.05//README -rw-rw-r-- root/root 673 2013-03-12 06:16 perl-WWW-Curl-4.05//README.Win32 -rw-rw-r-- root/root 4168 2013-03-12 06:16 perl-WWW-Curl-4.05//SIGNATURE drwxrwxr-x root/root 0 2013-03-12 06:16 perl-WWW-Curl-4.05//inc/ drwxrwxr-x root/root 0 2013-03-12 06:16 perl-WWW-Curl-4.05//inc/Module/ -rw-rw-r-- root/root 8549 2013-03-12 06:16 perl-WWW-Curl-4.05//inc/Module/Install.pm drwxrwxr-x root/root 0 2013-03-12 06:16 perl-WWW-Curl-4.05//inc/Module/Install/ -rw-rw-r-- root/root 1053 2013-03-12 06:16 perl-WWW-Curl-4.05//inc/Module/Install/Base.pm -rw-rw-r-- root/root 1788 2013-03-12 06:16 perl-WWW-Curl-4.05//inc/Module/Install/Can.pm -rw-rw-r-- root/root 1530 2013-03-12 06:16 perl-WWW-Curl-4.05//inc/Module/Install/External.pm -rw-rw-r-- root/root 1094 2013-03-12 06:16 perl-WWW-Curl-4.05//inc/Module/Install/MakeMaker.pm -rw-rw-r-- root/root 6225 2013-03-12 06:16 perl-WWW-Curl-4.05//inc/Module/Install/Makefile.pm -rw-rw-r-- root/root 9448 2013-03-12 06:16 perl-WWW-Curl-4.05//inc/Module/Install/Metadata.pm drwxrwxr-x root/root 0 2013-03-12 06:16 perl-WWW-Curl-4.05//lib/ drwxrwxr-x root/root 0 2013-03-12 06:16 perl-WWW-Curl-4.05//lib/WWW/ -rw-rw-r-- root/root 10200 2013-03-12 06:16 perl-WWW-Curl-4.05//lib/WWW/Curl.pm drwxrwxr-x root/root 0 2013-03-12 06:16 perl-WWW-Curl-4.05//lib/WWW/Curl/ -rw-rw-r-- root/root 5242 2013-03-12 06:16 perl-WWW-Curl-4.05//lib/WWW/Curl/Easy.pm -rw-rw-r-- root/root 187 2013-03-12 06:16 perl-WWW-Curl-4.05//lib/WWW/Curl/Form.pm -rw-rw-r-- root/root 367 2013-03-12 06:16 perl-WWW-Curl-4.05//lib/WWW/Curl/Multi.pm -rw-rw-r-- root/root 1018 2013-03-12 06:16 perl-WWW-Curl-4.05//lib/WWW/Curl/Share.pm drwxrwxr-x root/root 0 2013-03-12 06:16 perl-WWW-Curl-4.05//packaging/ -rw-rw-r-- root/root 3915 2013-03-12 06:16 perl-WWW-Curl-4.05//packaging/perl-WWW-Curl.spec drwxrwxr-x root/root 0 2013-03-12 06:16 perl-WWW-Curl-4.05//t/ -rw-rw-r-- root/root 152 2013-03-12 06:16 perl-WWW-Curl-4.05//t/00constants.t -rw-rw-r-- root/root 1630 2013-03-12 06:16 perl-WWW-Curl-4.05//t/01basic.t -rw-rw-r-- root/root 1192 2013-03-12 06:16 perl-WWW-Curl-4.05//t/02callbacks.t -rw-rw-r-- root/root 1049 2013-03-12 06:16 perl-WWW-Curl-4.05//t/04abort-test.t -rw-rw-r-- root/root 1716 2013-03-12 06:16 perl-WWW-Curl-4.05//t/05progress.t -rw-rw-r-- root/root 1827 2013-03-12 06:16 perl-WWW-Curl-4.05//t/06http-post.t -rw-rw-r-- root/root 2103 2013-03-12 06:16 perl-WWW-Curl-4.05//t/07ftp-upload.t -rw-rw-r-- root/root 3243 2013-03-12 06:16 perl-WWW-Curl-4.05//t/08ssl.t -rw-rw-r-- root/root 1978 2013-03-12 06:16 perl-WWW-Curl-4.05//t/09times.t -rw-rw-r-- root/root 1284 2013-03-12 06:16 perl-WWW-Curl-4.05//t/10errbuf.t -rw-rw-r-- root/root 1133 2013-03-12 06:16 perl-WWW-Curl-4.05//t/13slowleak.t -rw-rw-r-- root/root 2178 2013-03-12 06:16 perl-WWW-Curl-4.05//t/14duphandle.t -rw-rw-r-- root/root 3153 2013-03-12 06:16 perl-WWW-Curl-4.05//t/15duphandle-callback.t -rw-rw-r-- root/root 2043 2013-03-12 06:16 perl-WWW-Curl-4.05//t/16formpost.t -rw-rw-r-- root/root 2236 2013-03-12 06:16 perl-WWW-Curl-4.05//t/17slist.t -rw-rw-r-- root/root 1547 2013-03-12 06:16 perl-WWW-Curl-4.05//t/18twinhandles.t -rw-rw-r-- root/root 134 2013-03-12 06:16 perl-WWW-Curl-4.05//t/meta.t drwxrwxr-x root/root 0 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/ -rw-rw-r-- root/root 95 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/00constants.t -rw-rw-r-- root/root 407 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/01basic.t -rw-rw-r-- root/root 456 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/02header-callback.t -rw-rw-r-- root/root 454 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/03body-callback.t -rw-rw-r-- root/root 422 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/04abort.t -rw-rw-r-- root/root 668 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/05progress.t -rw-rw-r-- root/root 727 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/06http-post.t -rw-rw-r-- root/root 205 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/07errbuf.t -rw-rw-r-- root/root 443 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/08duphandle.t -rw-rw-r-- root/root 489 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/09duphandle-callback.t -rw-rw-r-- root/root 1269 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/10multi-callback.t -rw-rw-r-- root/root 381 2013-03-12 06:16 perl-WWW-Curl-4.05//t/new/README -rw-rw-r-- root/root 232 2013-03-12 06:16 perl-WWW-Curl-4.05//t/pod-coverage.t -rw-rw-r-- root/root 140 2013-03-12 06:16 perl-WWW-Curl-4.05//t/pod.t drwxrwxr-x root/root 0 2013-03-12 06:16 perl-WWW-Curl-4.05//template/ -rw-rw-r-- root/root 1095 2013-03-12 06:16 perl-WWW-Curl-4.05//template/Easy.pm.tmpl -rw-rw-r-- root/root 763 2013-03-12 06:16 perl-WWW-Curl-4.05//template/Share.pm.tmpl -rw-rw-r-- root/root 110 2013-03-12 06:16 perl-WWW-Curl-4.05//typemap + STATUS=0 + '[' 0 -ne 0 ']' + cd perl-WWW-Curl-4.05 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + chmod -R u+w /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05 + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.OwndCf + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd perl-WWW-Curl-4.05 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED + grep -rsl '^#!.*perl' . + grep -v '.bak$' + xargs --no-run-if-empty /usr/bin/perl -MExtUtils::MakeMaker -e 'MY->fixin(@ARGV)' + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' ++ /usr/bin/perl -MExtUtils::MakeMaker -e ' print qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr| if $ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ ' + /usr/bin/perl Makefile.PL Locating required external dependency bin:curl-config... found at /usr/bin/curl-config. Found curl.h in /usr/include/curl/curl.h Building curlopt-constants.c for your libcurl version Building Easy.pm constants for your libcurl version Building Share.pm constants for your libcurl version Checking if your kit is complete... Looks good Writing Makefile for WWW::Curl + /usr/bin/make cp lib/WWW/Curl/Share.pm blib/lib/WWW/Curl/Share.pm AutoSplitting blib/lib/WWW/Curl/Share.pm (blib/lib/auto/WWW/Curl/Share) cp lib/WWW/Curl/Form.pm blib/lib/WWW/Curl/Form.pm cp lib/WWW/Curl.pm blib/lib/WWW/Curl.pm cp lib/WWW/Curl/Easy.pm blib/lib/WWW/Curl/Easy.pm AutoSplitting blib/lib/WWW/Curl/Easy.pm (blib/lib/auto/WWW/Curl/Easy) cp lib/WWW/Curl/Multi.pm blib/lib/WWW/Curl/Multi.pm /usr/bin/perl "-Iinc" /usr/lib/perl5/5.12.1/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.12.1/ExtUtils/typemap -typemap typemap Curl.xs > Curl.xsc && mv Curl.xsc Curl.c gcc -c -I/usr/include -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DPERL_USE_SAFE_PUTENV -DVERSION=\"4.05\" -DXS_VERSION=\"4.05\" -fPIC "-I/usr/lib/perl5/5.12.1/arm-linux-thread-multi/CORE" Curl.c Curl.xs: In function 'fwrite_wrapper2': Curl.xs:341:13: warning: unused variable 'sv' Curl.c: In function 'XS_WWW__Curl__Easy_init': Curl.c:663:5: warning: unused variable 'ix' Curl.c: In function 'XS_WWW__Curl__Easy_version': Curl.c:785:11: warning: unused variable 'items' Curl.c: In function 'XS_WWW__Curl__Easy_internal_setopt': Curl.c:991:6: warning: unused variable 'value' Curl.c:990:6: warning: unused variable 'option' Curl.c: In function 'XS_WWW__Curl__Form_add': Curl.c:1316:9: warning: unused variable 'value' Curl.c:1315:9: warning: unused variable 'name' Curl.c: In function 'XS_WWW__Curl__Form_addfile': Curl.c:1353:9: warning: unused variable 'type' Curl.c:1352:9: warning: unused variable 'description' Curl.c:1351:9: warning: unused variable 'filename' Curl.xs: In function 'XS_WWW__Curl__Multi_info_read': Curl.xs:1046:3: warning: call to '_curl_easy_getinfo_err_string' declared with attribute warning: curl_easy_getinfo expects a pointer to char * for this info Curl.xs:1047:3: warning: call to '_curl_easy_setopt_err_curl_off_t' declared with attribute warning: curl_easy_setopt expects a curl_off_t argument for this option Curl.xs: In function 'XS_WWW__Curl__Easy_setopt': Curl.xs:698:3: warning: call to '_curl_easy_setopt_err_debug_cb' declared with attribute warning: curl_easy_setopt expects a curl_debug_callback argument for this option Curl.xs:719:3: warning: call to '_curl_easy_setopt_err_debug_cb' declared with attribute warning: curl_easy_setopt expects a curl_debug_callback argument for this option Curl.xs:769:26: warning: call to '_curl_easy_setopt_err_FILE' declared with attribute warning: curl_easy_setopt expects a FILE* argument for this option Curl.xs:791:16: warning: call to '_curl_easy_setopt_err_CURLSH' declared with attribute warning: curl_easy_setopt expects a CURLSH* argument for this option Curl.xs: In function 'XS_WWW__Curl__Easy_duphandle': Curl.xs:650:3: warning: call to '_curl_easy_setopt_err_debug_cb' declared with attribute warning: curl_easy_setopt expects a curl_debug_callback argument for this option Running Mkbootstrap for WWW::Curl () chmod 644 Curl.bs rm -f blib/arch/auto/WWW/Curl/Curl.so gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DPERL_USE_SAFE_PUTENV -L/usr/local/lib Curl.o -o blib/arch/auto/WWW/Curl/Curl.so \ -lcurl -lcares -lidn -lssl -lcrypto -lrt -lssl -lcrypto -lz \ chmod 755 blib/arch/auto/WWW/Curl/Curl.so cp Curl.bs blib/arch/auto/WWW/Curl/Curl.bs chmod 644 blib/arch/auto/WWW/Curl/Curl.bs Manifying blib/man3/WWW::Curl.3pm + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.HAt6yO + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd perl-WWW-Curl-4.05 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm '!=' / ']' + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm ++ /usr/bin/perl -MExtUtils::MakeMaker -e ' print $ExtUtils::MakeMaker::VERSION <= 6.05 ? qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr| : qq|DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm| ' + /usr/bin/make prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr exec_prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr bindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/bin sbindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/sbin sysconfdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/etc datadir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/share includedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/include libdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/lib libexecdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/libexec localstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/var sharedstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/var/lib mandir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/share/man infodir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/share/info install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/local/lib/perl5/site_perl/5.12.1/arm-linux-thread-multi/auto/WWW/Curl/Curl.so Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/local/lib/perl5/site_perl/5.12.1/arm-linux-thread-multi/auto/WWW/Curl/Curl.bs Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/local/lib/perl5/site_perl/5.12.1/arm-linux-thread-multi/WWW/Curl.pm Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/local/lib/perl5/site_perl/5.12.1/arm-linux-thread-multi/WWW/Curl/Share.pm Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/local/lib/perl5/site_perl/5.12.1/arm-linux-thread-multi/WWW/Curl/Easy.pm Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/local/lib/perl5/site_perl/5.12.1/arm-linux-thread-multi/WWW/Curl/Multi.pm Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/local/lib/perl5/site_perl/5.12.1/arm-linux-thread-multi/WWW/Curl/Form.pm Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/local/lib/perl5/site_perl/5.12.1/arm-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/local/lib/perl5/site_perl/5.12.1/arm-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/local/share/man/man3/WWW::Curl.3pm Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/lib/perl5/5.12.1/arm-linux-thread-multi/perllocal.pod + cmd=/usr/share/spec-helper/compress_files + '[' -x /usr/share/spec-helper/compress_files ']' + cmd=/usr/lib/rpm/brp-compress + '[' -x /usr/lib/rpm/brp-compress ']' + /usr/lib/rpm/brp-compress + '[' -e /etc/SuSE-release -o -e /etc/UnitedLinux-release ']' + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm -name perllocal.pod -o -name .packlist -o -name '*.bs' + xargs -i rm -f '{}' + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr -type d -depth -exec rmdir '{}' ';' + /usr/bin/perl -MFile::Find -le ' find({ wanted => \&wanted, no_chdir => 1}, "/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm"); print "%doc README.Win32 template inc Changes README LICENSE"; for my $x (sort @dirs, @files) { push @ret, $x unless indirs($x); } print join "\n", sort @ret; sub wanted { return if /auto$/; local $_ = $File::Find::name; my $f = $_; s|^\Q/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm\E||; return unless length; return $files[@files] = $_ if -f $f; $d = $_; /\Q$d\E/ && return for reverse sort @INC; $d =~ /\Q$_\E/ && return for qw|/etc /usr/man /usr/bin /usr/share|; $dirs[@dirs] = $_; } sub indirs { my $x = shift; $x =~ /^\Q$_\E\// && $x ne $_ && return 1 for @dirs; } ' + '[' -z WWW-Curl-4.05-filelist ']' + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/local/lib/perl5/site_perl/5.12.1/arm-linux-thread-multi/auto/WWW/Curl/Curl.so 210 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm Processing files: perl-WWW-Curl-4.05-4.1.armv7l Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.s59XVz + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd perl-WWW-Curl-4.05 + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/share/doc/perl-WWW-Curl-4.05 + export DOCDIR + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/share/doc/perl-WWW-Curl-4.05 + cp -pr README.Win32 template inc Changes README LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm/usr/share/doc/perl-WWW-Curl-4.05 + exit 0 Provides: Curl.so perl(Module::Install) = 0.75 perl(Module::Install::Base) = 0.75 perl(Module::Install::Base::FakeAdmin) perl(Module::Install::Can) = 0.75 perl(Module::Install::External) = 0.75 perl(Module::Install::MakeMaker) = 0.75 perl(Module::Install::Makefile) = 0.75 perl(Module::Install::Metadata) = 0.75 perl(WWW::Curl) = 4.05 perl(WWW::Curl::Easy) = 4.05 perl(WWW::Curl::Form) perl(WWW::Curl::Multi) perl(WWW::Curl::Share) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcares.so.2 libcrypto.so.1.0.0 libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libidn.so.11 librt.so.1 libssl.so.1.0.0 libz.so.1 perl(AutoLoader) perl(Carp) perl(Config) perl(Cwd) perl(DynaLoader) perl(Exporter) perl(ExtUtils::MakeMaker) perl(File::Find) perl(File::Path) perl(File::Spec) perl(FindBin) perl(Module::Install::Base) perl(WWW::Curl) perl(strict) perl(vars) perl(warnings) Processing files: perl-WWW-Curl-debuginfo-4.05-4.1.armv7l Processing files: perl-WWW-Curl-debugsource-4.05-4.1.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm Wrote: /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-4.1.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-4.05-4.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debuginfo-4.05-4.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debugsource-4.05-4.1.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.5BBRn1 + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd perl-WWW-Curl-4.05 + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm '!=' / ']' + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-4.1.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs w12 finished "build perl-WWW-Curl.spec" at Wed Apr 24 02:54:02 UTC 2013. Retried build at Wed Apr 24 02:36:35 2013 returned same result, skipped Retried build at Wed Apr 24 21:22:51 2013 returned same result, skipped Retried build at Thu Apr 25 00:32:13 2013 returned same result, skipped Retried build at Mon May 13 09:35:38 2013 returned same result, skipped Retried build at Mon May 20 11:06:58 2013 returned same result, skipped