[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w07 started "build edje.spec" at Thu Jan 2 10:28:57 UTC 2014. [ 0s] [ 0s] Building edje for project 'Tizen:2.2:Main' repository 'emulator' arch 'i586' srcmd5 '6c55d6589bc50beb55f6a1f0483011d2' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/edje.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/edje.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/edje.spec build rpmlint-Factory ... [ 1s] hostname: Name or service not known [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: eglibc -> libgcc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: rpm -> rpm-libs [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/30] preinstalling libgcc... [ 1s] [2/30] preinstalling setup... [ 1s] [3/30] preinstalling filesystem... [ 1s] [4/30] preinstalling eglibc... [ 1s] [5/30] preinstalling bzip2-libs... [ 1s] [6/30] preinstalling elfutils-libelf... [ 1s] [7/30] preinstalling libattr... [ 1s] [8/30] preinstalling liblua... [ 1s] [9/30] preinstalling ncurses-libs... [ 1s] [10/30] preinstalling nspr... [ 1s] [11/30] preinstalling nss-softokn-freebl... [ 1s] [12/30] preinstalling popt... [ 1s] [13/30] preinstalling readline... [ 1s] [14/30] preinstalling sed... [ 1s] [15/30] preinstalling sqlite... [ 1s] [16/30] preinstalling xz-libs... [ 1s] [17/30] preinstalling zlib... [ 1s] [18/30] preinstalling bash... [ 1s] [19/30] preinstalling diffutils... [ 1s] [20/30] preinstalling libstdc++... [ 1s] [21/30] preinstalling eglibc-common... [ 2s] [22/30] preinstalling libacl... [ 2s] [23/30] preinstalling libcap... [ 2s] [24/30] preinstalling libfile... [ 2s] [25/30] preinstalling bzip2... [ 2s] [26/30] preinstalling nss... [ 2s] [27/30] preinstalling tar... [ 2s] [28/30] preinstalling coreutils... [ 2s] [29/30] preinstalling rpm-libs... [ 2s] [30/30] preinstalling rpm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: dbus-libs -> dbus [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: libremix -> libremix-devel [ 3s] breaking dependency libremix-devel -> libremix [ 3s] cycle: libudev -> udev -> systemd [ 3s] breaking dependency udev -> systemd [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: pulseaudio-libs -> pulseaudio [ 3s] breaking dependency pulseaudio -> pulseaudio-libs [ 3s] cycle: nss-sysinit -> nss [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm -> rpm-libs [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4 [ 5s] [ 0.000000] tsc: Fast TSC calibration failed [ 6s] doing fast boot [ 6s] Creating device nodes with udev [ 7s] Waiting for device /dev/vda to appear: ok [ 7s] fsck from util-linux 2.21.2 [ 7s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 7s] /dev/vda: clean, 6243/2097152 files, 194801/8388608 blocks [ 7s] fsck succeeded. Mounting root device read-write. [ 7s] Mounting root /dev/vda [ 7s] mount -o rw -t ext4 /dev/vda /root [ 7s] replacing /etc/mtab with symlink to /proc/self/mounts [ 7s] 2nd stage started in virtual machine [ 7s] machine type: x86_64 [ 7s] switching personality to 8... [ 7s] 2nd stage started in virtual machine [ 7s] machine type: i686 [ 8s] swapon on /dev/vdb [ 8s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 8s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/edje.spec ... [ 10s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/edje.spec build rpmlint-Factory ... [ 10s] initializing rpm db... [ 10s] [1/194] installing cloog-0.15.9-1.29 [ 10s] [2/194] installing kernel-headers-3.0.15-1.8 [ 10s] [3/194] installing libX11-common-1.5.0-3.4 [ 10s] [4/194] installing tizen-release-2.2.0-1.8 [ 10s] [5/194] installing tzdata-2011h-1.7 [ 10s] [6/194] installing libgcc-4.5.3-2.14 [ 11s] [7/194] installing setup-0.1-2.7 [ 11s] [8/194] installing filesystem-0.1-1.9 [ 11s] warning: group lock does not exist - using root [ 11s] warning: group mail does not exist - using root [ 11s] [9/194] installing eglibc-2.13-2.16 [ 11s] [10/194] installing libstdc++-4.5.3-2.14 [ 11s] [11/194] installing bzip2-libs-1.0.5-5.10 [ 11s] [12/194] installing c-ares-1.7.4-3.19 [ 11s] [13/194] installing cpio-2.8-4.8 [ 11s] [14/194] installing e2fsprogs-libs-1.41.9-3.8 [ 12s] [15/194] installing elfutils-libelf-0.152-2.35 [ 12s] [16/194] installing expat-2.0.1-8.12 [ 12s] [17/194] installing findutils-4.2.31-2.8 [ 12s] [18/194] installing fribidi-0.19.5-5.7 [ 12s] [19/194] installing gdbm-1.8.3-2.30 [ 12s] [20/194] installing kmod-5-5.1 [ 12s] [21/194] installing libICE-1.0.8-1.6 [ 12s] [22/194] installing libXau-1.0.7-1.6 [ 12s] [23/194] installing libattr-2.4.44-8.12 [ 12s] [24/194] installing libffi-3.0.9-101.1 [ 12s] [25/194] installing libflac-1.2.1+slp2+build03-1.9 [ 12s] [26/194] installing libidn-1.15-7.23 [ 12s] [27/194] installing libjpeg-turbo-1.2.0-8.5 [ 12s] [28/194] installing liblua-5.1.4-7.8 [ 12s] [29/194] installing libstdc++-devel-4.5.3-2.14 [ 12s] [30/194] installing libtool-ltdl-2.2.6b-2.15 [ 12s] [31/194] installing libunwind-1.1-4.1 [ 12s] [32/194] installing libuuid-2.20.2-7.6 [ 12s] [33/194] installing lzo-2.03-2.18 [ 12s] [34/194] installing m4-1.4.14-1.9 [ 12s] [35/194] installing make-3.81-1.7 [ 13s] [36/194] installing net-tools-1.60-88.8 [ 13s] [37/194] installing nspr-4.8.7-1.10 [ 13s] [38/194] installing nss-softokn-freebl-3.12.9-3.23 [ 13s] [39/194] installing patch-2.6.1.169-1.7 [ 13s] [40/194] installing pixman-0.28.2-1.6 [ 13s] [41/194] installing pkgconfig-0.25-3.10 [ 13s] [42/194] installing popt-1.16-4.11 [ 13s] [43/194] installing readline-5.2-14.9 [ 14s] [44/194] installing sed-4.1.5-3.8 [ 14s] [45/194] installing smack-1.0slp2+s12-1.8 [ 14s] [46/194] installing sqlite-3.7.13-1.12 [ 14s] [47/194] installing xz-libs-5.0.3-2.15 [ 14s] [48/194] installing zlib-1.2.5-3.17 [ 14s] [49/194] installing bash-4.1-4.6 [ 14s] [50/194] installing diffutils-3.0-4.8 [ 14s] [51/194] installing libasound-1.0.24.1-4.1 [ 14s] [52/194] installing libgomp-4.5.3-2.14 [ 14s] [53/194] installing speex-1.2rc1-4.1 [ 14s] [54/194] installing gmp-5.0.1-2.16 [ 14s] [55/194] installing libpcre-7.7-4.37 [ 14s] [56/194] installing ncurses-libs-5.7-4.9 [ 15s] [57/194] installing build-compare-2009.10.14-26.10 [ 15s] [58/194] installing emulator-macros-1-1.7 [ 15s] [59/194] installing eglibc-headers-2.13-2.16 [ 15s] [60/194] installing freetype-2.4.9-4.8 [ 15s] [61/194] installing fribidi-devel-0.19.5-5.7 [ 16s] [62/194] installing grep-2.5.1a-63.8 [ 16s] [63/194] installing libacl-2.2.49-3.7 [ 16s] [64/194] installing libcap-2.21-2.12 [ 16s] [65/194] installing libfile-5.04-2.12 [ 16s] [66/194] installing liblua-devel-5.1.4-7.8 [ 16s] [67/194] installing libpci3-3.0.0-2.1 [ 16s] [68/194] installing libpng-1.2.50-1.6 [ 16s] [69/194] installing libsndfile-1.0.25-2.1 [ 17s] [70/194] installing libxcb-1.8.1-1.6 [ 17s] [71/194] installing lzo-minilzo-2.03-2.18 [ 17s] [72/194] installing mpfr-3.0.0-1.15 [ 17s] [73/194] installing ncurses-5.7-4.9 [ 17s] [74/194] installing pixman-devel-0.28.2-1.6 [ 17s] [75/194] installing unzip-6.0-10.18 [ 17s] [76/194] installing zlib-devel-1.2.5-3.17 [ 17s] [77/194] installing bzip2-1.0.5-5.10 [ 18s] [78/194] installing glib2-2.32.3-6.2 [ 24s] [79/194] installing libSM-1.2.1-1.5 [ 25s] [80/194] installing libblkid-2.20.2-7.6 [ 25s] [81/194] installing smack-utils-1.0slp2+s12-1.8 [ 25s] [82/194] installing xz-5.0.3-2.15 [ 26s] [83/194] installing binutils-2.22-1.11 [ 26s] [84/194] installing libicu-4.8-2.1 [ 27s] [85/194] installing ppl-0.10.2-10.15 [ 28s] [86/194] installing elfutils-libs-0.152-2.35 [ 28s] [87/194] installing libflac-devel-1.2.1+slp2+build03-1.9 [ 28s] [88/194] installing nss-3.12.9-3.23 [ 30s] [89/194] installing perl-5.12.1-62.9 [ 35s] [90/194] installing ncurses-base-5.7-4.9 [ 35s] [91/194] installing perl-HTML-Tagset-3.20-8.5 [ 35s] [92/194] installing perl-IO-Compress-Base-2.008-62.9 [ 35s] [93/194] installing perl-Module-Pluggable-3.60-62.9 [ 36s] [94/194] installing perl-Pod-Escapes-1.04-62.9 [ 36s] [95/194] installing perl-TimeDate-1.20-1.6 [ 36s] [96/194] installing eglibc-devel-2.13-2.16 [ 36s] [97/194] installing libsndfile-devel-1.0.25-2.1 [ 36s] [98/194] installing perl-Compress-Raw-Zlib-2.008-62.9 [ 36s] [99/194] installing perl-libs-5.12.1-62.9 [ 37s] [100/194] installing tar-1.17-5.7 [ 37s] [101/194] installing coreutils-6.9-9.9 [ 42s] [102/194] installing file-5.04-2.12 [ 42s] [103/194] installing libdlog-0.4.1-17.6 [ 42s] chown: `root:app_logging': invalid user [ 42s] [104/194] installing libmount-2.20.2-7.6 [ 43s] [105/194] installing lzo-devel-2.03-2.18 [ 43s] [106/194] installing mpc-0.9-1.14 [ 43s] [107/194] installing openssl-1.0.1c-2.23 [ 43s] [108/194] installing pciutils-3.0.0-2.1 [ 43s] [109/194] installing perl-devel-5.12.1-62.9 [ 46s] [110/194] installing xz-lzma-compat-5.0.3-2.15 [ 46s] [111/194] installing cloog-ppl-0.15.9-1.29 [ 46s] [112/194] installing freetype-devel-2.4.9-4.8 [ 46s] [113/194] installing libX11-1.5.0-3.4 [ 47s] [114/194] installing nss-sysinit-3.12.9-3.23 [ 49s] [115/194] installing elfutils-0.152-2.35 [ 49s] [116/194] installing eglibc-common-2.13-2.16 [ 55s] [117/194] installing udev-182-7.4 [ 55s] [118/194] installing eina-1.7.1+svn.77445+build06r01-1.6 [ 55s] [119/194] installing libXcomposite-0.4.3-3.3 [ 55s] [120/194] installing libXext-1.3.1-1.3 [ 55s] [121/194] installing libXfixes-5.0-2.3 [ 56s] [122/194] installing libXrender-0.9.7-1.3 [ 56s] [123/194] installing libdlog-devel-0.4.1-17.6 [ 56s] [124/194] installing perl-ExtUtils-ParseXS-2.18-62.9 [ 56s] [125/194] installing perl-Pod-Simple-3.07-62.9 [ 57s] [126/194] installing perl-Test-Simple-0.80-62.9 [ 57s] [127/194] installing gawk-3.1.5-2.9 [ 58s] [128/194] installing gzip-1.3.14-3.7 [ 58s] [129/194] installing libidn-devel-1.15-7.23 [ 58s] [130/194] installing libudev-182-7.4 [ 58s] [131/194] installing pam-1.1.5-3.7 [ 58s] [132/194] installing perl-IO-Compress-Zlib-2.008-62.9 [ 59s] [133/194] installing perl-Test-Harness-3.12-62.9 [ 59s] [134/194] installing giflib-4.1.6-13.4 [ 59s] [135/194] installing build-2011.01.10a-1.9 [ 59s] [136/194] installing libcurl-7.28.1-3.21 [ 59s] [137/194] installing libremix-devel-0.2.4+slp2+build09r01-1.6 [ 60s] [138/194] installing sys-assert-0.3.3-5.6 [ 60s] chown: `root:crash': invalid user [ 60s] chown: `root:crash': invalid user [ 60s] [139/194] installing dbus-1.6.4-7.1 [ 60s] warning: group dbus does not exist - using root [ 60s] [140/194] installing fontconfig-2.9.0-3.1 [ 63s] [141/194] installing util-linux-2.20.2-7.6 [ 63s] warning: group tty does not exist - using root [ 63s] /bin/chown: `root:root': invalid user [ 63s] [142/194] installing cpp-4.5.3-2.14 [ 64s] [143/194] installing glib2-devel-2.32.3-6.2 [ 64s] [144/194] installing dbus-libs-1.6.4-7.1 [ 64s] [145/194] installing embryo-1.7.1+svn.76491slp2+build01-1.6 [ 64s] [146/194] installing ecore-1.7.1+svn.77580+build25r05-2.6 [ 64s] [147/194] installing eina-devel-1.7.1+svn.77445+build06r01-1.6 [ 64s] [148/194] installing fontconfig-devel-2.9.0-3.1 [ 64s] [149/194] installing libXdamage-1.1.3-3.3 [ 65s] [150/194] installing libXgesture-0.1.1-3.3 [ 65s] [151/194] installing libXi-1.6.1-1.3 [ 65s] [152/194] installing libXinerama-1.1.2-1.3 [ 65s] [153/194] installing libremix-0.2.4+slp2+build09r01-1.6 [ 65s] [154/194] installing perl-ExtUtils-MakeMaker-6.36-62.9 [ 65s] [155/194] installing eet-1.7.1+svn.77495slp2+build01-1.7 [ 65s] [156/194] installing libXcursor-1.1.13-1.3 [ 66s] [157/194] installing libXrandr-1.4.0-3.3 [ 66s] [158/194] installing libcurl-devel-7.28.1-3.21 [ 66s] [159/194] installing simulator-opengl-0.2.19-1.1 [ 66s] [160/194] installing curl-7.28.1-3.21 [ 66s] [161/194] installing cairo-1.12.12-12.1 [ 66s] [162/194] installing gcc-4.5.3-2.14 [ 67s] [163/194] installing embryo-devel-1.7.1+svn.76491slp2+build01-1.6 [ 68s] [164/194] installing perl-CPAN-1.9205-62.9 [ 68s] [165/194] installing ecore-imf-1.7.1+svn.77580+build25r05-2.6 [ 68s] [166/194] installing ecore-input-1.7.1+svn.77580+build25r05-2.6 [ 68s] [167/194] installing eet-devel-1.7.1+svn.77495slp2+build01-1.7 [ 69s] [168/194] installing libXtst-1.2.0-3.3 [ 70s] [169/194] installing autoconf-2.68-1.10 [ 70s] [170/194] installing ecore-con-1.7.1+svn.77580+build25r05-2.6 [ 70s] [171/194] installing bluez-4.101_23-25.3 [ 71s] [172/194] installing harfbuzz-0.9.7-1.8 [ 71s] [173/194] installing systemd-43-3.3 [ 72s] [174/194] installing gcc-c++-4.5.3-2.14 [ 73s] [175/194] installing rpm-4.9.1-4.10 [ 73s] [176/194] installing harfbuzz-devel-0.9.7-1.8 [ 74s] [177/194] installing automake-1.11.1-3.12 [ 74s] [178/194] installing ecore-fb-1.7.1+svn.77580+build25r05-2.6 [ 74s] [179/194] installing vconf-0.2.51-1.4 [ 75s] Failed to get D-Bus connection: No connection to service manager. [ 75s] warning: %post(vconf-0.2.51-1.4.i586) scriptlet failed, exit status 1 [ 75s] [180/194] installing ecore-file-1.7.1+svn.77580+build25r05-2.6 [ 75s] [181/194] installing ecore-ipc-1.7.1+svn.77580+build25r05-2.6 [ 75s] [182/194] installing rpm-libs-4.9.1-4.10 [ 76s] [183/194] installing evas-1.7.1+svn.77561+build32r02-1.6 [ 76s] [184/194] installing ecore-x-1.7.1+svn.77580+build25r05-2.6 [ 76s] [185/194] installing libtool-2.2.6b-2.15 [ 76s] [186/194] installing ecore-imf-evas-1.7.1+svn.77580+build25r05-2.6 [ 76s] [187/194] installing ecore-input-evas-1.7.1+svn.77580+build25r05-2.6 [ 76s] [188/194] installing evas-devel-1.7.1+svn.77561+build32r02-1.6 [ 77s] [189/194] installing pulseaudio-0.9.23-35.4 [ 77s] Failed to get D-Bus connection: No connection to service manager. [ 77s] Failed to get D-Bus connection: No connection to service manager. [ 77s] warning: %post(pulseaudio-0.9.23-35.4.i586) scriptlet failed, exit status 1 [ 77s] [190/194] installing rpm-build-4.9.1-4.10 [ 77s] [191/194] installing pulseaudio-libs-0.9.23-35.4 [ 77s] [192/194] installing ecore-evas-1.7.1+svn.77580+build25r05-2.6 [ 77s] [193/194] installing pulseaudio-libs-devel-0.9.23-35.4 [ 77s] [194/194] installing ecore-devel-1.7.1+svn.77580+build25r05-2.6 [ 77s] now finalizing build dir... [ 77s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 78s] ----------------------------------------------------------------- [ 78s] I have the following modifications for edje.spec: [ 78s] 5c5 [ 78s] < Release: 1 [ 78s] --- [ 78s] > Release: 2.13 [ 78s] ----------------------------------------------------------------- [ 78s] ----- building edje.spec (user abuild) [ 78s] ----------------------------------------------------------------- [ 78s] ----------------------------------------------------------------- [ 78s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.2:Main/emulator/6c55d6589bc50beb55f6a1f0483011d2-edje' /home/abuild/rpmbuild/SOURCES/edje.spec [ 78s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.UKtwQB [ 78s] + umask 022 [ 78s] + cd /home/abuild/rpmbuild/BUILD [ 78s] + LANG=C [ 78s] + export LANG [ 78s] + unset DISPLAY [ 78s] + cd /home/abuild/rpmbuild/BUILD [ 78s] + rm -rf edje-1.7.1+svn.77330+build57 [ 78s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/edje-1.7.1+svn.77330+build57.tar.gz [ 78s] + /bin/tar -xf - [ 78s] + STATUS=0 [ 78s] + '[' 0 -ne 0 ']' [ 78s] + cd edje-1.7.1+svn.77330+build57 [ 78s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 78s] + exit 0 [ 78s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.gnFCK9 [ 78s] + umask 022 [ 78s] + cd /home/abuild/rpmbuild/BUILD [ 78s] + cd edje-1.7.1+svn.77330+build57 [ 78s] + LANG=C [ 78s] + export LANG [ 78s] + unset DISPLAY [ 78s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 78s] + export CFLAGS [ 78s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 78s] + export CXXFLAGS [ 78s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 78s] + export FFLAGS [ 78s] + LD_AS_NEEDED=1 [ 78s] + export LD_AS_NEEDED [ 78s] + export 'CFLAGS+= -fvisibility=hidden -ffast-math -fPIC' [ 78s] + CFLAGS+=' -fvisibility=hidden -ffast-math -fPIC' [ 78s] + export 'LDFLAGS+= -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed' [ 78s] + LDFLAGS+=' -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed' [ 79s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fvisibility=hidden -ffast-math -fPIC' [ 79s] + export CFLAGS [ 79s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 79s] + export CXXFLAGS [ 79s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 79s] + export FFLAGS [ 79s] + ./autogen.sh --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 79s] Running aclocal... [ 80s] sh: svnversion: command not found [ 80s] Running autoheader... [ 80s] sh: svnversion: command not found [ 81s] Running autoconf... [ 81s] Running libtoolize... [ 82s] Running automake... [ 82s] configure.ac:567: installing `./compile' [ 82s] configure.ac:38: installing `./config.guess' [ 82s] configure.ac:38: installing `./config.sub' [ 82s] configure.ac:35: installing `./install-sh' [ 82s] configure.ac:35: installing `./missing' [ 82s] doc/Makefile.am:34: wildcard img/*.*: non-POSIX variable name [ 82s] doc/Makefile.am:34: (probably a GNU make extension) [ 82s] doc/Makefile.am:34: wildcard examples/*.*: non-POSIX variable name [ 82s] doc/Makefile.am:34: (probably a GNU make extension) [ 82s] src/bin/Makefile.am: installing `./depcomp' [ 83s] cmp: config.cache-env: No such file or directory [ 83s] Cleaning configure cache... [ 83s] configure: creating cache config.cache [ 83s] checking for a BSD-compatible install... /usr/bin/install -c [ 84s] checking whether build environment is sane... yes [ 84s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 84s] checking for gawk... gawk [ 84s] checking whether make sets $(MAKE)... yes [ 84s] checking build system type... i686-pc-linux-gnu [ 84s] checking host system type... i686-pc-linux-gnu [ 84s] checking for style of include used by make... GNU [ 84s] checking for i686-pc-linux-gnu-gcc... no [ 84s] checking for gcc... gcc [ 84s] checking whether the C compiler works... yes [ 84s] checking for C compiler default output file name... a.out [ 84s] checking for suffix of executables... [ 84s] checking whether we are cross compiling... no [ 84s] checking for suffix of object files... o [ 84s] checking whether we are using the GNU C compiler... yes [ 84s] checking whether gcc accepts -g... yes [ 84s] checking for gcc option to accept ISO C89... none needed [ 84s] checking dependency style of gcc... gcc3 [ 84s] checking for a sed that does not truncate output... /bin/sed [ 84s] checking for grep that handles long lines and -e... /bin/grep [ 84s] checking for egrep... /bin/grep -E [ 84s] checking for fgrep... /bin/grep -F [ 84s] checking for ld used by gcc... /usr/bin/ld [ 84s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 84s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 84s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 84s] checking whether ln -s works... yes [ 84s] checking the maximum length of command line arguments... 1572864 [ 84s] checking whether the shell understands some XSI constructs... yes [ 84s] checking whether the shell understands "+="... yes [ 84s] checking for /usr/bin/ld option to reload object files... -r [ 84s] checking for i686-pc-linux-gnu-objdump... objdump [ 84s] checking how to recognize dependent libraries... pass_all [ 84s] checking for i686-pc-linux-gnu-ar... no [ 84s] checking for ar... ar [ 84s] checking for i686-pc-linux-gnu-strip... no [ 84s] checking for strip... strip [ 84s] checking for i686-pc-linux-gnu-ranlib... no [ 84s] checking for ranlib... ranlib [ 85s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 85s] checking how to run the C preprocessor... gcc -E [ 85s] checking for ANSI C header files... yes [ 85s] checking for sys/types.h... yes [ 85s] checking for sys/stat.h... yes [ 85s] checking for stdlib.h... yes [ 85s] checking for string.h... yes [ 85s] checking for memory.h... yes [ 85s] checking for strings.h... yes [ 85s] checking for inttypes.h... yes [ 85s] checking for stdint.h... yes [ 85s] checking for unistd.h... yes [ 85s] checking for dlfcn.h... yes [ 85s] checking for objdir... .libs [ 85s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 85s] checking for gcc option to produce PIC... -fPIC -DPIC [ 85s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 85s] checking if gcc static flag -static works... no [ 85s] checking if gcc supports -c -o file.o... yes [ 85s] checking if gcc supports -c -o file.o... (cached) yes [ 85s] checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes [ 85s] checking whether -lc should be explicitly linked in... no [ 85s] checking dynamic linker characteristics... GNU/Linux ld.so [ 85s] checking how to hardcode library paths into programs... immediate [ 85s] checking whether stripping libraries is possible... yes [ 85s] checking if libtool supports shared libraries... yes [ 85s] checking whether to build shared libraries... yes [ 85s] checking whether to build static libraries... no [ 85s] configure: edje_cc set to /bin/edje_cc [ 85s] configure: edje_codegen set to /bin/edje_codegen [ 85s] checking whether to build edje_cc binary... yes [ 85s] checking whether to build edje_decc binary... yes [ 85s] checking whether to build edje_recc binary... yes [ 85s] checking whether to build edje_player binary... yes [ 85s] checking whether to build edje_inspector binary... yes [ 85s] checking whether to build edje_external_inspector binary... yes [ 85s] checking whether to build edje_watch binary... yes [ 85s] checking whether to build edje_codegen binary... yes [ 85s] checking for location of Vim data files... Not found, EDC syntax file will not be installed [ 85s] checking for i686-pc-linux-gnu-gcc... gcc [ 85s] checking whether we are using the GNU C compiler... (cached) yes [ 85s] checking whether gcc accepts -g... (cached) yes [ 85s] checking for gcc option to accept ISO C89... (cached) none needed [ 85s] checking dependency style of gcc... (cached) gcc3 [ 85s] checking whether to build documentation... yes [ 85s] checking for doxygen... no [ 85s] WARNING: [ 85s] The doxygen program was not found in your execute path. [ 85s] You may have doxygen installed somewhere not covered by your path. [ 85s] [ 85s] If this is the case make sure you have the packages installed, AND [ 85s] that the doxygen program is in your execute path (see your [ 85s] shell manual page on setting the $PATH environment variable), OR [ 85s] alternatively, specify the program to use with --with-doxygen. [ 85s] configure: WARNING: no doxygen detected. Documentation will not be built [ 85s] checking for a Python interpreter with version >= 2.5... none [ 85s] checking for i686-pc-linux-gnu-pkg-config... no [ 85s] checking for pkg-config... /usr/bin/pkg-config [ 85s] checking pkg-config is at least version 0.9.0... yes [ 85s] checking for LUA... yes [ 85s] checking for MINIMAL... yes [ 85s] checking for EDJE... yes [ 85s] checking for ECORE_IMF... yes [ 85s] checking for EIO... no [ 85s] checking for SNDFILE... yes [ 85s] checking for REMIX... yes [ 85s] checking for VORBISENC... no [ 85s] checking for ALSA... no [ 85s] checking for PA... yes [ 85s] checking for FLAC... yes [ 85s] checking for EDJE_CC... yes [ 85s] checking for EDJE_DECC... yes [ 85s] checking for EDJE_PLAYER... yes [ 85s] checking for EDJE_INSPECTOR... yes [ 85s] checking for EDJE_EXTERNAL_INSPECTOR... yes [ 85s] checking for EDJE_WATCH... no [ 85s] checking for EDJE_CODEGEN... yes [ 85s] checking locale.h usability... yes [ 85s] checking locale.h presence... yes [ 85s] checking for locale.h... yes [ 85s] checking sys/resource.h usability... yes [ 85s] checking sys/resource.h presence... yes [ 85s] checking for sys/resource.h... yes [ 85s] checking for PATH_MAX in limits.h... yes [ 85s] checking whether gcc and cc understand -c and -o together... yes [ 85s] checking for an ANSI C-conforming const... yes [ 86s] checking for gcc option to accept ISO C99... -std=gnu99 [ 86s] checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 86s] checking for ANSI C header files... (cached) yes [ 86s] checking for __attribute__... yes [ 86s] checking for library containing strerror... none required [ 86s] checking for size_t... yes [ 86s] checking for working alloca.h... yes [ 86s] checking for alloca... yes [ 86s] checking for realpath... yes [ 86s] checking whether tests are built... no [ 86s] checking whether to use profiling instrumentation... no [ 86s] configure: updating cache config.cache [ 86s] configure: creating ./config.status [ 86s] config.status: creating edje.pc [ 86s] config.status: creating edje.spec [ 86s] config.status: creating Makefile [ 86s] config.status: creating data/Makefile [ 86s] config.status: creating data/include/Makefile [ 86s] config.status: creating doc/Makefile [ 86s] config.status: creating doc/Doxyfile [ 86s] config.status: creating src/Makefile [ 86s] config.status: creating src/lib/Makefile [ 86s] config.status: creating src/bin/Makefile [ 86s] config.status: creating src/bin/epp/Makefile [ 86s] config.status: creating src/modules/Makefile [ 86s] config.status: creating src/modules/alsa_snd_player/Makefile [ 86s] config.status: creating src/modules/pa_snd_player/Makefile [ 86s] config.status: creating src/modules/eet_snd_reader/Makefile [ 86s] config.status: creating src/modules/multisense_factory/Makefile [ 86s] config.status: creating src/tests/Makefile [ 86s] config.status: creating utils/Makefile [ 86s] config.status: creating src/examples/Makefile [ 86s] config.status: creating config.h [ 86s] config.status: executing depfiles commands [ 86s] config.status: executing libtool commands [ 86s] [ 86s] [ 86s] [ 86s] ------------------------------------------------------------------------ [ 86s] edje 1.7.99.0 [ 86s] ------------------------------------------------------------------------ [ 86s] [ 86s] Configuration Options Summary: [ 86s] [ 86s] Amalgamation.........: no [ 86s] Ecore IMF............: yes [ 86s] EIO..................: no [ 86s] LibRemix.............: yes [ 86s] Libsndfile...........: yes [ 86s] Ogg/Vorbis...........: no [ 86s] LibFLAC..............: yes [ 86s] LibALSA..............: no [ 86s] LibPA................: yes [ 86s] EDJE_PROGRAM_CACHE...: no [ 86s] EDJE_CALC_CACHE......: yes [ 86s] Fixed point..........: no [ 86s] Documentation........: no [ 86s] Tests................: no [ 86s] Coverage.............: no [ 86s] Examples.............: install: build:no [ 86s] [ 86s] Programs: [ 86s] [ 86s] Build edje_cc................: yes [ 86s] Build edje_decc..............: yes [ 86s] Build edje_recc..............: yes [ 86s] Build edje_player............: yes [ 86s] Build edje_inspector.........: yes [ 86s] Build edje_external_inspector: yes [ 86s] Build edje_watch.............: no [ 86s] Build edje_codegen...........: yes [ 86s] [ 86s] Compilation............: make (or gmake) [ 86s] CPPFLAGS.............: [ 86s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fvisibility=hidden -ffast-math -fPIC [ 86s] LDFLAGS..............: -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed [ 86s] [ 86s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 86s] prefix...............: /usr [ 86s] [ 86s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fvisibility=hidden -ffast-math -fPIC' [ 86s] + export CFLAGS [ 86s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 86s] + export CXXFLAGS [ 86s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 86s] + export FFLAGS [ 86s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 87s] checking for a BSD-compatible install... /usr/bin/install -c [ 88s] checking whether build environment is sane... yes [ 88s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 88s] checking for gawk... gawk [ 88s] checking whether make sets $(MAKE)... yes [ 88s] checking build system type... i686-pc-linux-gnu [ 88s] checking host system type... i686-pc-linux-gnu [ 88s] checking for style of include used by make... GNU [ 88s] checking for i686-pc-linux-gnu-gcc... no [ 88s] checking for gcc... gcc [ 88s] checking whether the C compiler works... yes [ 88s] checking for C compiler default output file name... a.out [ 88s] checking for suffix of executables... [ 88s] checking whether we are cross compiling... no [ 88s] checking for suffix of object files... o [ 88s] checking whether we are using the GNU C compiler... yes [ 88s] checking whether gcc accepts -g... yes [ 88s] checking for gcc option to accept ISO C89... none needed [ 88s] checking dependency style of gcc... gcc3 [ 88s] checking for a sed that does not truncate output... /bin/sed [ 88s] checking for grep that handles long lines and -e... /bin/grep [ 88s] checking for egrep... /bin/grep -E [ 88s] checking for fgrep... /bin/grep -F [ 88s] checking for ld used by gcc... /usr/bin/ld [ 88s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 88s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 88s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 88s] checking whether ln -s works... yes [ 88s] checking the maximum length of command line arguments... 1572864 [ 88s] checking whether the shell understands some XSI constructs... yes [ 88s] checking whether the shell understands "+="... yes [ 88s] checking for /usr/bin/ld option to reload object files... -r [ 88s] checking for i686-pc-linux-gnu-objdump... objdump [ 88s] checking how to recognize dependent libraries... pass_all [ 88s] checking for i686-pc-linux-gnu-ar... no [ 88s] checking for ar... ar [ 88s] checking for i686-pc-linux-gnu-strip... no [ 88s] checking for strip... strip [ 88s] checking for i686-pc-linux-gnu-ranlib... no [ 88s] checking for ranlib... ranlib [ 88s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 88s] checking how to run the C preprocessor... gcc -E [ 88s] checking for ANSI C header files... yes [ 88s] checking for sys/types.h... yes [ 88s] checking for sys/stat.h... yes [ 88s] checking for stdlib.h... yes [ 88s] checking for string.h... yes [ 88s] checking for memory.h... yes [ 88s] checking for strings.h... yes [ 88s] checking for inttypes.h... yes [ 88s] checking for stdint.h... yes [ 88s] checking for unistd.h... yes [ 88s] checking for dlfcn.h... yes [ 88s] checking for objdir... .libs [ 88s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 88s] checking for gcc option to produce PIC... -fPIC -DPIC [ 88s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 88s] checking if gcc static flag -static works... no [ 88s] checking if gcc supports -c -o file.o... yes [ 88s] checking if gcc supports -c -o file.o... (cached) yes [ 88s] checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes [ 88s] checking whether -lc should be explicitly linked in... no [ 88s] checking dynamic linker characteristics... GNU/Linux ld.so [ 88s] checking how to hardcode library paths into programs... immediate [ 88s] checking whether stripping libraries is possible... yes [ 88s] checking if libtool supports shared libraries... yes [ 88s] checking whether to build shared libraries... yes [ 88s] checking whether to build static libraries... no [ 88s] configure: edje_cc set to /bin/edje_cc [ 88s] configure: edje_codegen set to /bin/edje_codegen [ 88s] checking whether to build edje_cc binary... yes [ 88s] checking whether to build edje_decc binary... yes [ 88s] checking whether to build edje_recc binary... yes [ 88s] checking whether to build edje_player binary... yes [ 88s] checking whether to build edje_inspector binary... yes [ 88s] checking whether to build edje_external_inspector binary... yes [ 88s] checking whether to build edje_watch binary... yes [ 88s] checking whether to build edje_codegen binary... yes [ 88s] checking for location of Vim data files... Not found, EDC syntax file will not be installed [ 88s] checking for i686-pc-linux-gnu-gcc... gcc [ 88s] checking whether we are using the GNU C compiler... (cached) yes [ 88s] checking whether gcc accepts -g... (cached) yes [ 88s] checking for gcc option to accept ISO C89... (cached) none needed [ 88s] checking dependency style of gcc... (cached) gcc3 [ 88s] checking whether to build documentation... yes [ 88s] checking for doxygen... no [ 88s] WARNING: [ 88s] The doxygen program was not found in your execute path. [ 88s] You may have doxygen installed somewhere not covered by your path. [ 88s] [ 88s] If this is the case make sure you have the packages installed, AND [ 88s] that the doxygen program is in your execute path (see your [ 88s] shell manual page on setting the $PATH environment variable), OR [ 88s] alternatively, specify the program to use with --with-doxygen. [ 88s] configure: WARNING: no doxygen detected. Documentation will not be built [ 89s] checking for a Python interpreter with version >= 2.5... none [ 89s] checking for i686-pc-linux-gnu-pkg-config... no [ 89s] checking for pkg-config... /usr/bin/pkg-config [ 89s] checking pkg-config is at least version 0.9.0... yes [ 89s] checking for LUA... yes [ 89s] checking for MINIMAL... yes [ 89s] checking for EDJE... yes [ 89s] checking for ECORE_IMF... yes [ 89s] checking for EIO... no [ 89s] checking for SNDFILE... yes [ 89s] checking for REMIX... yes [ 89s] checking for VORBISENC... no [ 89s] checking for ALSA... no [ 89s] checking for PA... yes [ 89s] checking for FLAC... yes [ 89s] checking for EDJE_CC... yes [ 89s] checking for EDJE_DECC... yes [ 89s] checking for EDJE_PLAYER... yes [ 89s] checking for EDJE_INSPECTOR... yes [ 89s] checking for EDJE_EXTERNAL_INSPECTOR... yes [ 89s] checking for EDJE_WATCH... no [ 89s] checking for EDJE_CODEGEN... yes [ 89s] checking locale.h usability... yes [ 89s] checking locale.h presence... yes [ 89s] checking for locale.h... yes [ 89s] checking sys/resource.h usability... yes [ 89s] checking sys/resource.h presence... yes [ 89s] checking for sys/resource.h... yes [ 89s] checking for PATH_MAX in limits.h... yes [ 89s] checking whether gcc and cc understand -c and -o together... yes [ 89s] checking for an ANSI C-conforming const... yes [ 89s] checking for gcc option to accept ISO C99... -std=gnu99 [ 89s] checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 89s] checking for ANSI C header files... (cached) yes [ 89s] checking for __attribute__... yes [ 89s] checking for library containing strerror... none required [ 89s] checking for size_t... yes [ 89s] checking for working alloca.h... yes [ 89s] checking for alloca... yes [ 89s] checking for realpath... yes [ 89s] checking whether tests are built... no [ 89s] checking whether to use profiling instrumentation... no [ 89s] configure: creating ./config.status [ 89s] config.status: creating edje.pc [ 89s] config.status: creating edje.spec [ 89s] config.status: creating Makefile [ 89s] config.status: creating data/Makefile [ 89s] config.status: creating data/include/Makefile [ 89s] config.status: creating doc/Makefile [ 89s] config.status: creating doc/Doxyfile [ 89s] config.status: creating src/Makefile [ 89s] config.status: creating src/lib/Makefile [ 89s] config.status: creating src/bin/Makefile [ 89s] config.status: creating src/bin/epp/Makefile [ 89s] config.status: creating src/modules/Makefile [ 89s] config.status: creating src/modules/alsa_snd_player/Makefile [ 89s] config.status: creating src/modules/pa_snd_player/Makefile [ 90s] config.status: creating src/modules/eet_snd_reader/Makefile [ 90s] config.status: creating src/modules/multisense_factory/Makefile [ 90s] config.status: creating src/tests/Makefile [ 90s] config.status: creating utils/Makefile [ 90s] config.status: creating src/examples/Makefile [ 90s] config.status: creating config.h [ 90s] config.status: config.h is unchanged [ 90s] config.status: executing depfiles commands [ 90s] config.status: executing libtool commands [ 90s] [ 90s] [ 90s] [ 90s] ------------------------------------------------------------------------ [ 90s] edje 1.7.99.0 [ 90s] ------------------------------------------------------------------------ [ 90s] [ 90s] Configuration Options Summary: [ 90s] [ 90s] Amalgamation.........: no [ 90s] Ecore IMF............: yes [ 90s] EIO..................: no [ 90s] LibRemix.............: yes [ 90s] Libsndfile...........: yes [ 90s] Ogg/Vorbis...........: no [ 90s] LibFLAC..............: yes [ 90s] LibALSA..............: no [ 90s] LibPA................: yes [ 90s] EDJE_PROGRAM_CACHE...: no [ 90s] EDJE_CALC_CACHE......: yes [ 90s] Fixed point..........: no [ 90s] Documentation........: no [ 90s] Tests................: no [ 90s] Coverage.............: no [ 90s] Examples.............: install: build:no [ 90s] [ 90s] Programs: [ 90s] [ 90s] Build edje_cc................: yes [ 90s] Build edje_decc..............: yes [ 90s] Build edje_recc..............: yes [ 90s] Build edje_player............: yes [ 90s] Build edje_inspector.........: yes [ 90s] Build edje_external_inspector: yes [ 90s] Build edje_watch.............: no [ 90s] Build edje_codegen...........: yes [ 90s] [ 90s] Compilation............: make (or gmake) [ 90s] CPPFLAGS.............: [ 90s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fvisibility=hidden -ffast-math -fPIC [ 90s] LDFLAGS..............: -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed [ 90s] [ 90s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 90s] prefix...............: /usr [ 90s] [ 90s] + make -j4 [ 90s] make all-recursive [ 90s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 90s] Making all in data [ 90s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 90s] Making all in include [ 90s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data/include' [ 90s] make[3]: Nothing to be done for `all'. [ 90s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data/include' [ 90s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 90s] make[3]: Nothing to be done for `all-am'. [ 90s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 90s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 90s] Making all in src [ 90s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 90s] Making all in lib [ 90s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/lib' [ 90s] CC edje_box_layout.lo [ 90s] CC edje_cache.lo [ 90s] CC edje_calc.lo [ 90s] CC edje_callbacks.lo [ 90s] CC edje_container.lo [ 90s] CC edje_data.lo [ 90s] CC edje_edit.lo [ 90s] CC edje_embryo.lo [ 91s] CC edje_entry.lo [ 91s] CC edje_external.lo [ 91s] CC edje_load.lo [ 92s] CC edje_lua.lo [ 92s] CC edje_lua2.lo [ 92s] CC edje_lua_script_only.lo [ 92s] CC edje_main.lo [ 92s] CC edje_match.lo [ 92s] CC edje_message_queue.lo [ 93s] CC edje_misc.lo [ 93s] CC edje_module.lo [ 93s] CC edje_multisense.lo [ 93s] CC edje_program.lo [ 93s] edje_multisense.c: In function '_edje_multisense_shutdown': [ 93s] edje_multisense.c:506:14: warning: ignoring return value of 'write', declared with attribute warn_unused_result [ 93s] CC edje_script_only.lo [ 93s] CC edje_smart.lo [ 93s] edje_multisense.c:489:37: warning: 'multisense_factory_shutdown' may be used uninitialized in this function [ 93s] CC edje_text.lo [ 93s] CC edje_textblock_styles.lo [ 93s] CC edje_util.lo [ 93s] CC edje_var.lo [ 94s] CCLD libedje.la [ 95s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/lib' [ 95s] Making all in bin [ 95s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 95s] Making all in epp [ 95s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin/epp' [ 95s] CC epp-cppalloc.o [ 95s] CC epp-cpperror.o [ 95s] CC epp-cppexp.o [ 95s] CC epp-cpphash.o [ 95s] CC epp-cpplib.o [ 95s] CC epp-cppmain.o [ 96s] CCLD epp [ 96s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin/epp' [ 96s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 96s] CC edje_cc-edje_cc.o [ 96s] CC edje_cc-edje_cc_out.o [ 96s] CC edje_cc-edje_cc_parse.o [ 96s] CC edje_cc-edje_cc_mem.o [ 97s] CC edje_cc-edje_cc_handlers.o [ 97s] CC edje_cc-edje_cc_sources.o [ 97s] CC edje_cc-edje_multisense_convert.o [ 97s] CC edje_decc-edje_decc.o [ 97s] CC edje_decc-edje_cc_mem.o [ 97s] CC edje_decc-edje_cc_sources.o [ 97s] CC edje_player-edje_player.o [ 97s] CC edje_inspector-edje_inspector.o [ 97s] CC edje_external_inspector-edje_external_inspector.o [ 97s] CC edje_codegen-edje_codegen.o [ 98s] edje_codegen.c: In function '_parse_parts': [ 98s] edje_codegen.c:777:23: warning: unused variable 'typename' [ 98s] CCLD edje_decc [ 98s] CCLD edje_player [ 98s] CCLD edje_external_inspector [ 98s] edje_codegen.c: In function 'main': [ 98s] edje_codegen.c:1088:10: warning: 'source' may be used uninitialized in this function [ 98s] edje_codegen.c:1088:19: warning: 'header' may be used uninitialized in this function [ 98s] CCLD edje_cc [ 98s] CCLD edje_inspector [ 98s] CCLD edje_codegen [ 98s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 98s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 98s] Making all in modules [ 98s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 98s] Making all in multisense_factory [ 98s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory' [ 98s] CC module_la-multisense_factory.lo [ 98s] CCLD module.la [ 98s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory' [ 98s] Making all in eet_snd_reader [ 98s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/eet_snd_reader' [ 98s] CC libeet_sndfile_reader_la-eet_snd_reader.lo [ 99s] eet_snd_reader.c: In function 'remix_eet_sndfile_create': [ 99s] eet_snd_reader.c:203:14: warning: passing argument 1 of 'free' discards qualifiers from pointer target type [ 99s] /usr/include/stdlib.h:488:13: note: expected 'void *' but argument is of type 'const char *' [ 99s] eet_snd_reader.c:208:14: warning: passing argument 1 of 'free' discards qualifiers from pointer target type [ 99s] /usr/include/stdlib.h:488:13: note: expected 'void *' but argument is of type 'const void *' [ 99s] eet_snd_reader.c: In function 'remix_eet_sndfile_destroy': [ 99s] eet_snd_reader.c:260:14: warning: passing argument 1 of 'free' discards qualifiers from pointer target type [ 99s] /usr/include/stdlib.h:488:13: note: expected 'void *' but argument is of type 'const char *' [ 99s] eet_snd_reader.c: In function 'remix_eet_sndfile_create': [ 99s] eet_snd_reader.c:138:16: warning: 'sound_data' may be used uninitialized in this function [ 99s] CCLD libeet_sndfile_reader.la [ 99s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/eet_snd_reader' [ 99s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 99s] make[4]: Nothing to be done for `all-am'. [ 99s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 99s] Making all in tests [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/tests' [ 99s] make[3]: Nothing to be done for `all'. [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/tests' [ 99s] Making all in examples [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 99s] make all-am [ 99s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 99s] make[4]: Nothing to be done for `all-am'. [ 99s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 99s] make[3]: Nothing to be done for `all-am'. [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 99s] Making all in utils [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/utils' [ 99s] make[2]: Nothing to be done for `all'. [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/utils' [ 99s] Making all in doc [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/doc' [ 99s] make[2]: Nothing to be done for `all'. [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/doc' [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 99s] + exit 0 [ 99s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ugkPnW [ 99s] + umask 022 [ 99s] + cd /home/abuild/rpmbuild/BUILD [ 99s] + cd edje-1.7.1+svn.77330+build57 [ 99s] + LANG=C [ 99s] + export LANG [ 99s] + unset DISPLAY [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386 [ 99s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386 [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386 [ 99s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386 install [ 99s] Making install in data [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 99s] Making install in include [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data/include' [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data/include' [ 99s] make[3]: Nothing to be done for `install-exec-am'. [ 99s] test -z "/usr/share/edje/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/share/edje/include" [ 99s] /usr/bin/install -c -m 644 edje.inc '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/share/edje/include' [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data/include' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data/include' [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 99s] make[3]: Nothing to be done for `install-exec-am'. [ 99s] test -z "/usr/share/mime/packages" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/share/mime/packages" [ 99s] /usr/bin/install -c -m 644 edje.xml '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/share/mime/packages' [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 99s] Making install in src [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 99s] Making install in lib [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/lib' [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/lib' [ 99s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib" [ 99s] /bin/sh ../../libtool --mode=install /usr/bin/install -c libedje.la '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib' [ 99s] libtool: install: /usr/bin/install -c .libs/libedje.so.1.7.99 /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/libedje.so.1.7.99 [ 99s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib && { ln -s -f libedje.so.1.7.99 libedje.so.1 || { rm -f libedje.so.1 && ln -s libedje.so.1.7.99 libedje.so.1; }; }) [ 99s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib && { ln -s -f libedje.so.1.7.99 libedje.so || { rm -f libedje.so && ln -s libedje.so.1.7.99 libedje.so; }; }) [ 99s] libtool: install: /usr/bin/install -c .libs/libedje.lai /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/libedje.la [ 99s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 99s] test -z "/usr/include/edje-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/include/edje-1" [ 99s] /usr/bin/install -c -m 644 Edje.h Edje_Edit.h '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/include/edje-1' [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/lib' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/lib' [ 99s] Making install in bin [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 99s] Making install in epp [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin/epp' [ 99s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin/epp' [ 99s] make[4]: Nothing to be done for `install-exec-am'. [ 99s] test -z "/usr/lib/edje/utils" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/edje/utils" [ 99s] /bin/sh ../../../libtool --mode=install /usr/bin/install -c epp '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/edje/utils' [ 99s] libtool: install: /usr/bin/install -c epp /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/edje/utils/epp [ 99s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin/epp' [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin/epp' [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 99s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 99s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin" [ 99s] /bin/sh ../../libtool --mode=install /usr/bin/install -c edje_cc edje_decc edje_player edje_inspector edje_external_inspector edje_codegen '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin' [ 99s] libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /usr/bin/install -c .libs/edje_cc /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin/edje_cc [ 99s] libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /usr/bin/install -c .libs/edje_decc /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin/edje_decc [ 99s] libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /usr/bin/install -c .libs/edje_player /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin/edje_player [ 99s] libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /usr/bin/install -c .libs/edje_inspector /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin/edje_inspector [ 99s] libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /usr/bin/install -c .libs/edje_external_inspector /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin/edje_external_inspector [ 99s] libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /usr/bin/install -c .libs/edje_codegen /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin/edje_codegen [ 99s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin" [ 99s] /usr/bin/install -c edje_recc '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin' [ 99s] make[4]: Nothing to be done for `install-data-am'. [ 99s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 99s] Making install in modules [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 99s] Making install in multisense_factory [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory' [ 99s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory' [ 99s] make[4]: Nothing to be done for `install-exec-am'. [ 99s] test -z "/usr/lib/edje/modules/multisense_factory/linux-gnu-i686-1.0.0" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/edje/modules/multisense_factory/linux-gnu-i686-1.0.0" [ 99s] /bin/sh ../../../libtool --mode=install /usr/bin/install -c module.la '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/edje/modules/multisense_factory/linux-gnu-i686-1.0.0' [ 99s] libtool: install: warning: relinking `module.la' [ 99s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory; /bin/sh /home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/libtool --silent --tag CC --tag disable-static --mode=relink gcc -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fvisibility=hidden -ffast-math -fPIC -no-undefined -module -avoid-version ../../../src/lib/libedje.la -pthread -leet -levas -lrt -lecore -leina -lecore_evas -lecore_file -lecore_input -lembryo -llua -lm -ldl -lremix -ldl -lctxdata -lsndfile -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed -o module.la -rpath /usr/lib/edje/modules/multisense_factory/linux-gnu-i686-1.0.0 module_la-multisense_factory.lo -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386) [ 99s] libtool: install: /usr/bin/install -c .libs/module.soT /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/edje/modules/multisense_factory/linux-gnu-i686-1.0.0/module.so [ 99s] libtool: install: /usr/bin/install -c .libs/module.lai /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/edje/modules/multisense_factory/linux-gnu-i686-1.0.0/module.la [ 99s] libtool: install: warning: remember to run `libtool --finish /usr/lib/edje/modules/multisense_factory/linux-gnu-i686-1.0.0' [ 99s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory' [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory' [ 99s] Making install in eet_snd_reader [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/eet_snd_reader' [ 99s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/eet_snd_reader' [ 99s] make[4]: Nothing to be done for `install-exec-am'. [ 99s] test -z "/usr/lib/remix" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/remix" [ 99s] /bin/sh ../../../libtool --mode=install /usr/bin/install -c libeet_sndfile_reader.la '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/remix' [ 99s] libtool: install: /usr/bin/install -c .libs/libeet_sndfile_reader.so /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/remix/libeet_sndfile_reader.so [ 99s] libtool: install: /usr/bin/install -c .libs/libeet_sndfile_reader.lai /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/remix/libeet_sndfile_reader.la [ 99s] libtool: install: warning: remember to run `libtool --finish /usr/lib/remix' [ 99s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/eet_snd_reader' [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/eet_snd_reader' [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 99s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 99s] make[4]: Nothing to be done for `install-exec-am'. [ 99s] make[4]: Nothing to be done for `install-data-am'. [ 99s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 99s] Making install in tests [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/tests' [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/tests' [ 99s] make[3]: Nothing to be done for `install-exec-am'. [ 99s] make[3]: Nothing to be done for `install-data-am'. [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/tests' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/tests' [ 99s] Making install in examples [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 99s] /usr/bin/make install-am [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 99s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 99s] make[4]: Nothing to be done for `install-exec-am'. [ 99s] test -z "/usr/share/edje/examples" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/share/edje/examples" [ 99s] test -z "/usr/share/edje/examples" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/share/edje/examples" [ 99s] /usr/bin/install -c -m 644 basic.edc swallow.edc text.edc table.edc box.edc codegen.edc drag.edc edje_example.edc embryo_custom_state.edc embryo_pong.edc embryo_run_program.edc embryo_set_state.edc embryo_set_text.edc embryo_timer.edc external_elm_anchorblock.edc external_elm_button.edc external_elm_check.edc external_elm_panes.edc external_emotion_elm.edc toggle_using_filter.edc signals-messages.edc color-class.edc perspective.edc animations.edc lua_script.edc sigtest.edc animations2.edc basic2.edc signalsBubble.edc multisense.edc bubble.png red.png test.png Vera.ttf duck.wav edje-codegen-example.c edje_example.c edje-basic.c edje-swallow.c edje-text.c '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/share/edje/examples' [ 99s] /usr/bin/install -c -m 644 edje-table.c edje-box.c edje-box2.c edje-drag.c edje-signals-messages.c edje-color-class.c edje-perspective.c edje-animations.c sigtest.c animations2.c edje-basic2.c signals2.c edje-swallow2.c edje-multisense.c '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/share/edje/examples' [ 99s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 99s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 99s] make[3]: Nothing to be done for `install-exec-am'. [ 99s] make[3]: Nothing to be done for `install-data-am'. [ 99s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 99s] Making install in utils [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/utils' [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/utils' [ 99s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin" [ 99s] make[2]: Nothing to be done for `install-data-am'. [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/utils' [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/utils' [ 99s] Making install in doc [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/doc' [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/doc' [ 99s] make[2]: Nothing to be done for `install-exec-am'. [ 99s] make[2]: Nothing to be done for `install-data-am'. [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/doc' [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/doc' [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 99s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin" [ 99s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/pkgconfig" [ 99s] /usr/bin/install -c -m 644 edje.pc '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/pkgconfig' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 99s] + rm -f /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/share/info/dir [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386 -regex '.*\.la$' [ 99s] + xargs rm -f -- [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386 -regex '.*\.a$' [ 99s] + xargs rm -f -- [ 99s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/share/license [ 100s] + cp /home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/COPYING /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/share/license/edje [ 100s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57 [ 100s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin/edje_cc [ 100s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin/edje_codegen [ 100s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin/edje_decc [ 100s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin/edje_external_inspector [ 100s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin/edje_inspector [ 100s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/bin/edje_player [ 100s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/edje/modules/multisense_factory/linux-gnu-i686-1.0.0/module.so [ 100s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/edje/utils/epp [ 100s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/libedje.so.1.7.99 [ 100s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386/usr/lib/remix/libeet_sndfile_reader.so [ 100s] symlinked /usr/lib/debug/usr/lib/libedje.so.1.7.99.debug to /usr/lib/debug/usr/lib/libedje.so.debug [ 100s] symlinked /usr/lib/debug/usr/lib/libedje.so.1.7.99.debug to /usr/lib/debug/usr/lib/libedje.so.1.debug [ 100s] cpio: gcc-4.5.3/gcc/config/i386/cpuid.h: Cannot stat: No such file or directory [ 100s] cpio: gcc-4.5.3/gcc/config/i386/crtfastmath.c: Cannot stat: No such file or directory [ 100s] cpio: gcc-4.5.3/obj-i586-tizen-linux/i586-tizen-linux/libgcc: Cannot stat: No such file or directory [ 100s] 4901 blocks [ 100s] + /usr/lib/rpm/check-buildroot [ 100s] + /usr/lib/rpm//brp-compress [ 100s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 100s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 100s] + /usr/lib/rpm/brp-python-bytecompile [ 100s] + /usr/lib/rpm/brp-python-hardlink [ 101s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386 [ 101s] Processing files: edje-1.7.1+svn.77330+build57-2.13.i586 [ 101s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 101s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 101s] [ 101s] Provides: libedje.so.1 libeet_sndfile_reader.so module.so [ 101s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 101s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 101s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 101s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 101s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libctxdata.so.0 libdl.so.2 libecore.so.1 libecore_evas.so.1 libecore_file.so.1 libecore_imf.so.1 libecore_imf_evas.so.1 libecore_input.so.1 libedje.so.1 libeet.so.1 libeina.so.1 libembryo.so.1 libevas.so.1 liblua-5.1.so libm.so.6 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.3.2) libremix.so.0 librt.so.1 libsndfile.so.1 libsndfile.so.1(libsndfile.so.1.0) [ 101s] Processing files: edje-devel-1.7.1+svn.77330+build57-2.13.i586 [ 101s] Provides: pkgconfig(edje) = 1.7.99.0 [ 101s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 101s] Requires: /usr/bin/pkg-config libedje.so.1 pkgconfig(ecore) >= 1.6.99 pkgconfig(ecore-evas) >= 1.6.99 pkgconfig(ecore-imf) >= 1.6.99 pkgconfig(ecore-imf-evas) >= 1.6.99 pkgconfig(eet) >= 1.6.99 pkgconfig(eina) >= 1.6.99 pkgconfig(embryo) >= 1.6.99 pkgconfig(evas) >= 1.6.99 pkgconfig(libpulse) >= 0.9.21 pkgconfig(lua) pkgconfig(remix) >= 0.2.4 pkgconfig(sndfile) >= 1.0.21 [ 101s] Processing files: edje-tools-1.7.1+svn.77330+build57-2.13.i586 [ 101s] Provides: edje-bin [ 101s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 101s] Requires: /bin/sh libFLAC.so.8 libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libecore.so.1 libecore_evas.so.1 libecore_file.so.1 libedje.so.1 libeet.so.1 libeina.so.1 libevas.so.1 liblua-5.1.so libpthread.so.0 libpthread.so.0(GLIBC_2.0) libsndfile.so.1 libsndfile.so.1(libsndfile.so.1.0) [ 101s] Obsoletes: edje-bin [ 101s] Processing files: edje-debuginfo-1.7.1+svn.77330+build57-2.13.i586 [ 101s] Processing files: edje-debugsource-1.7.1+svn.77330+build57-2.13.i586 [ 101s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386 [ 101s] Wrote: /home/abuild/rpmbuild/SRPMS/edje-1.7.1+svn.77330+build57-2.13.src.rpm [ 101s] Wrote: /home/abuild/rpmbuild/RPMS/i586/edje-1.7.1+svn.77330+build57-2.13.i586.rpm [ 101s] Wrote: /home/abuild/rpmbuild/RPMS/i586/edje-devel-1.7.1+svn.77330+build57-2.13.i586.rpm [ 101s] Wrote: /home/abuild/rpmbuild/RPMS/i586/edje-tools-1.7.1+svn.77330+build57-2.13.i586.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/i586/edje-debuginfo-1.7.1+svn.77330+build57-2.13.i586.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/i586/edje-debugsource-1.7.1+svn.77330+build57-2.13.i586.rpm [ 102s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.irFu4p [ 102s] + umask 022 [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + cd edje-1.7.1+svn.77330+build57 [ 102s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.13.i386 [ 102s] + exit 0 [ 102s] ... checking for files with abuild user/group [ 102s] ... creating baselibs [ 102s] ... comparing built packages with the former built [ 102s] /usr/lib/build/rpm-check.sh [ 102s] compare /.build.oldpackages/edje-1.7.1+svn.77330+build57-2.12.src.rpm /home/abuild/rpmbuild/SRPMS/edje-1.7.1+svn.77330+build57-2.13.src.rpm [ 102s] compare /.build.oldpackages/edje-1.7.1+svn.77330+build57-2.12.i586.rpm /home/abuild/rpmbuild/RPMS/i586/edje-1.7.1+svn.77330+build57-2.13.i586.rpm [ 102s] --- /tmp/tmp.qjstHqZsCZ 2014-01-02 10:30:38.773686424 +0000 [ 102s] +++ /tmp/tmp.l4dnnqaRPw 2014-01-02 10:30:38.785686424 +0000 [ 102s] @@ -9,7 +9,7 @@ [ 102s] - edje_cc: Compiles EDC files. [ 102s] - edje_decc: Used to decompile compiled edje files. [ 102s] - edje_recc: A convenience script to recompile EDC files. [ 102s] - tizen Tizen:2.2:Main / emulator obs://w13.vlan200.tizendev.org/Tizen:2.2:Main/emulator/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 102s] + tizen Tizen:2.2:Main / emulator obs://build.tizen.org/Tizen:2.2:Main/emulator/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 102s] System/Libraries http://www.enlightenment.org/ (none) (none) (none) [ 102s] (none) 4.9.1 i586-tizen-linux-gnu [ 102s] cpio gzip 9 [ 102s] RPM meta information is different [ 102s] compare /.build.oldpackages/edje-debuginfo-1.7.1+svn.77330+build57-2.12.i586.rpm /home/abuild/rpmbuild/RPMS/i586/edje-debuginfo-1.7.1+svn.77330+build57-2.13.i586.rpm [ 103s] --- /tmp/tmp.V7Tl54lqE5 2014-01-02 10:30:38.873686421 +0000 [ 103s] +++ /tmp/tmp.68rosC1w1P 2014-01-02 10:30:38.885686420 +0000 [ 103s] @@ -3,7 +3,7 @@ [ 103s] This package provides debug information for package edje. [ 103s] Debug information is useful when developing applications that use this [ 103s] package or when debugging this package. [ 103s] - tizen Tizen:2.2:Main / emulator obs://w13.vlan200.tizendev.org/Tizen:2.2:Main/emulator/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 103s] + tizen Tizen:2.2:Main / emulator obs://build.tizen.org/Tizen:2.2:Main/emulator/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 103s] Development/Debug http://www.enlightenment.org/ (none) (none) (none) [ 103s] (none) 4.9.1 i586-tizen-linux-gnu [ 103s] cpio gzip 9 [ 103s] RPM meta information is different [ 103s] compare /.build.oldpackages/edje-debugsource-1.7.1+svn.77330+build57-2.12.i586.rpm /home/abuild/rpmbuild/RPMS/i586/edje-debugsource-1.7.1+svn.77330+build57-2.13.i586.rpm [ 103s] --- /tmp/tmp.e7vPMGa7P9 2014-01-02 10:30:38.929686419 +0000 [ 103s] +++ /tmp/tmp.Uh42Ec2kPR 2014-01-02 10:30:38.937686418 +0000 [ 103s] @@ -3,7 +3,7 @@ [ 103s] This package provides debug sources for package edje. [ 103s] Debug sources are useful when developing applications that use this [ 103s] package or when debugging this package. [ 103s] - tizen Tizen:2.2:Main / emulator obs://w13.vlan200.tizendev.org/Tizen:2.2:Main/emulator/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 103s] + tizen Tizen:2.2:Main / emulator obs://build.tizen.org/Tizen:2.2:Main/emulator/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 103s] Development/Debug http://www.enlightenment.org/ (none) (none) (none) [ 103s] (none) 4.9.1 i586-tizen-linux-gnu [ 103s] cpio gzip 9 [ 103s] RPM meta information is different [ 103s] compare /.build.oldpackages/edje-devel-1.7.1+svn.77330+build57-2.12.i586.rpm /home/abuild/rpmbuild/RPMS/i586/edje-devel-1.7.1+svn.77330+build57-2.13.i586.rpm [ 103s] --- /tmp/tmp.OyXYJIeKlJ 2014-01-02 10:30:39.025686415 +0000 [ 103s] +++ /tmp/tmp.Ngq7m9GeDf 2014-01-02 10:30:39.045686415 +0000 [ 103s] @@ -1,7 +1,7 @@ [ 103s] edje-devel 1.7.1+svn.77330+build57 (none) [ 103s] Complex Graphical Design/Layout Engine (devel) [ 103s] Edje is a graphical layout and animation library (devel) [ 103s] - tizen Tizen:2.2:Main / emulator obs://w13.vlan200.tizendev.org/Tizen:2.2:Main/emulator/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 103s] + tizen Tizen:2.2:Main / emulator obs://build.tizen.org/Tizen:2.2:Main/emulator/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 103s] Development/Libraries http://www.enlightenment.org/ (none) (none) (none) [ 103s] (none) 4.9.1 i586-tizen-linux-gnu [ 103s] cpio gzip 9 [ 103s] RPM meta information is different [ 103s] compare /.build.oldpackages/edje-tools-1.7.1+svn.77330+build57-2.12.i586.rpm /home/abuild/rpmbuild/RPMS/i586/edje-tools-1.7.1+svn.77330+build57-2.13.i586.rpm [ 103s] --- /tmp/tmp.1nfTjUJtqe 2014-01-02 10:30:39.093686413 +0000 [ 103s] +++ /tmp/tmp.jfMBEh573z 2014-01-02 10:30:39.101686413 +0000 [ 103s] @@ -1,7 +1,7 @@ [ 103s] edje-tools 1.7.1+svn.77330+build57 (none) [ 103s] Complex Graphical Design/Layout Engine (tools) [ 103s] Edje is a graphical layout and animation library (tools) [ 103s] - tizen Tizen:2.2:Main / emulator obs://w13.vlan200.tizendev.org/Tizen:2.2:Main/emulator/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 103s] + tizen Tizen:2.2:Main / emulator obs://build.tizen.org/Tizen:2.2:Main/emulator/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 103s] Development/Libraries http://www.enlightenment.org/ (none) (none) (none) [ 103s] (none) 4.9.1 i586-tizen-linux-gnu [ 103s] cpio gzip 9 [ 103s] RPM meta information is different [ 103s] ... saving built statistics [ 103s] ... saving built packages [ 103s] /home/abuild/rpmbuild/RPMS/i586/edje-1.7.1+svn.77330+build57-2.13.i586.rpm [ 103s] /home/abuild/rpmbuild/RPMS/i586/edje-debuginfo-1.7.1+svn.77330+build57-2.13.i586.rpm [ 103s] /home/abuild/rpmbuild/RPMS/i586/edje-debugsource-1.7.1+svn.77330+build57-2.13.i586.rpm [ 103s] /home/abuild/rpmbuild/RPMS/i586/edje-devel-1.7.1+svn.77330+build57-2.13.i586.rpm [ 103s] /home/abuild/rpmbuild/RPMS/i586/edje-tools-1.7.1+svn.77330+build57-2.13.i586.rpm [ 103s] /home/abuild/rpmbuild/SRPMS/edje-1.7.1+svn.77330+build57-2.13.src.rpm [ 103s] /home/abuild/rpmbuild/OTHER/_statistics [ 103s] [ 103s] w07 finished "build edje.spec" at Thu Jan 2 10:30:39 UTC 2014. [ 103s] [ 104s] /.build/build: line 368: 215 Killed background_monitor_process [ 106s] [ 100.321926] SysRq : Power Off [ 106s] [ 100.430555] Power down. [ 106s] build: extracting built packages... [ 106s] edje-1.7.1+svn.77330+build57-2.13.i586.rpm [ 106s] edje-debuginfo-1.7.1+svn.77330+build57-2.13.i586.rpm [ 106s] edje-debugsource-1.7.1+svn.77330+build57-2.13.i586.rpm [ 106s] edje-devel-1.7.1+svn.77330+build57-2.13.i586.rpm [ 106s] edje-tools-1.7.1+svn.77330+build57-2.13.i586.rpm [ 106s] edje-1.7.1+svn.77330+build57-2.13.src.rpm [ 106s] _statistics