[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w01 started "build xcb-proto.spec" at Thu Nov 7 04:44:16 UTC 2013. [ 0s] [ 0s] Building xcb-proto for project 'Tizen:2.2:Main' repository 'emulator' arch 'i586' srcmd5 '5b3f49f0f94b5e805d6ae51d023d8a20' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/xcb-proto.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/xcb-proto.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/xcb-proto.spec build rpmlint-Factory ... [ 0s] hostname: Name or service not known [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/30] preinstalling libgcc... [ 0s] [2/30] preinstalling setup... [ 0s] [3/30] preinstalling filesystem... [ 0s] [4/30] preinstalling eglibc... [ 0s] [5/30] preinstalling bzip2-libs... [ 0s] [6/30] preinstalling elfutils-libelf... [ 0s] [7/30] preinstalling libattr... [ 0s] [8/30] preinstalling liblua... [ 0s] [9/30] preinstalling ncurses-libs... [ 0s] [10/30] preinstalling nspr... [ 0s] [11/30] preinstalling nss-softokn-freebl... [ 0s] [12/30] preinstalling popt... [ 0s] [13/30] preinstalling readline... [ 0s] [14/30] preinstalling sed... [ 0s] [15/30] preinstalling sqlite... [ 0s] [16/30] preinstalling xz-libs... [ 0s] [17/30] preinstalling zlib... [ 0s] [18/30] preinstalling bash... [ 0s] [19/30] preinstalling diffutils... [ 0s] [20/30] preinstalling libstdc++... [ 1s] [21/30] preinstalling eglibc-common... [ 1s] [22/30] preinstalling libacl... [ 1s] [23/30] preinstalling libcap... [ 1s] [24/30] preinstalling libfile... [ 1s] [25/30] preinstalling bzip2... [ 1s] [26/30] preinstalling nss... [ 1s] [27/30] preinstalling tar... [ 1s] [28/30] preinstalling coreutils... [ 1s] [29/30] preinstalling rpm-libs... [ 1s] [30/30] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 1s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm-libs -> rpm [ 2s] breaking dependency rpm -> rpm-libs [ 2s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 4 [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 12s] Waiting for device /dev/vda to appear: ok [ 12s] fsck from util-linux 2.21.2 [ 12s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 12s] /dev/vda: clean, 6070/2097152 files, 189879/8388608 blocks [ 12s] fsck succeeded. Mounting root device read-write. [ 12s] Mounting root /dev/vda [ 12s] mount -o rw -t ext4 /dev/vda /root [ 12s] replacing /etc/mtab with symlink to /proc/self/mounts [ 12s] 2nd stage started in virtual machine [ 12s] machine type: x86_64 [ 12s] switching personality to 8... [ 12s] 2nd stage started in virtual machine [ 12s] machine type: i686 [ 12s] swapon on /dev/vdb [ 13s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 13s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 13s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 13s] logging output to //.build.log... [ 13s] processing specfile /.build-srcdir/xcb-proto.spec ... [ 13s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/xcb-proto.spec build rpmlint-Factory ... [ 13s] initializing rpm db... [ 13s] [1/108] installing cloog-0.15.9-1.29 [ 13s] [2/108] installing kernel-headers-3.0.15-1.8 [ 13s] [3/108] installing tizen-release-2.2.0-1.7 [ 13s] [4/108] installing tzdata-2011h-1.7 [ 13s] [5/108] installing libgcc-4.5.3-2.14 [ 13s] [6/108] installing setup-0.1-2.6 [ 13s] [7/108] installing filesystem-0.1-1.9 [ 14s] warning: group lock does not exist - using root [ 14s] warning: group mail does not exist - using root [ 14s] [8/108] installing eglibc-2.13-2.16 [ 14s] [9/108] installing libstdc++-4.5.3-2.14 [ 14s] [10/108] installing bzip2-libs-1.0.5-5.10 [ 14s] [11/108] installing c-ares-1.7.4-3.19 [ 14s] [12/108] installing cpio-2.8-4.8 [ 14s] [13/108] installing e2fsprogs-libs-1.41.9-3.7 [ 14s] [14/108] installing elfutils-libelf-0.152-2.35 [ 14s] [15/108] installing findutils-4.2.31-2.8 [ 14s] [16/108] installing gdbm-1.8.3-2.30 [ 14s] [17/108] installing libattr-2.4.44-8.12 [ 14s] [18/108] installing libidn-1.15-7.23 [ 15s] [19/108] installing liblua-5.1.4-7.8 [ 15s] [20/108] installing libstdc++-devel-4.5.3-2.14 [ 15s] [21/108] installing libuuid-2.20.2-7.6 [ 15s] [22/108] installing lzo-2.03-2.18 [ 15s] [23/108] installing m4-1.4.14-1.9 [ 15s] [24/108] installing make-3.81-1.7 [ 15s] [25/108] installing net-tools-1.60-88.8 [ 15s] [26/108] installing nspr-4.8.7-1.10 [ 15s] [27/108] installing nss-softokn-freebl-3.12.9-3.23 [ 15s] [28/108] installing patch-2.6.1.169-1.6 [ 15s] [29/108] installing pkgconfig-0.25-3.10 [ 15s] [30/108] installing popt-1.16-4.11 [ 15s] [31/108] installing readline-5.2-14.9 [ 17s] [32/108] installing sed-4.1.5-3.8 [ 19s] [33/108] installing sqlite-3.7.13-1.12 [ 23s] [34/108] installing xz-libs-5.0.3-2.15 [ 24s] [35/108] installing zlib-1.2.5-3.17 [ 27s] [36/108] installing bash-4.1-4.6 [ 28s] [37/108] installing diffutils-3.0-4.8 [ 30s] [38/108] installing libgomp-4.5.3-2.14 [ 31s] [39/108] installing gmp-5.0.1-2.16 [ 32s] [40/108] installing libpcre-7.7-4.37 [ 34s] [41/108] installing ncurses-libs-5.7-4.9 [ 35s] [42/108] installing build-compare-2009.10.14-26.10 [ 35s] [43/108] installing emulator-macros-1-1.7 [ 36s] [44/108] installing eglibc-headers-2.13-2.16 [ 37s] [45/108] installing grep-2.5.1a-63.8 [ 37s] [46/108] installing libacl-2.2.49-3.7 [ 38s] [47/108] installing libcap-2.21-2.12 [ 38s] [48/108] installing libfile-5.04-2.12 [ 39s] [49/108] installing libpython-2.7.1-2.9 [ 40s] [50/108] installing lzo-minilzo-2.03-2.18 [ 40s] [51/108] installing mpfr-3.0.0-1.15 [ 40s] [52/108] installing ncurses-5.7-4.9 [ 41s] [53/108] installing unzip-6.0-10.18 [ 42s] [54/108] installing zlib-devel-1.2.5-3.17 [ 42s] [55/108] installing bzip2-1.0.5-5.10 [ 43s] [56/108] installing libblkid-2.20.2-7.6 [ 43s] [57/108] installing xz-5.0.3-2.15 [ 44s] [58/108] installing binutils-2.22-1.11 [ 45s] [59/108] installing ppl-0.10.2-10.15 [ 47s] [60/108] installing elfutils-libs-0.152-2.35 [ 47s] [61/108] installing nss-3.12.9-3.23 [ 49s] [62/108] installing perl-5.12.1-62.8 [ 62s] [63/108] installing ncurses-base-5.7-4.9 [ 62s] [64/108] installing perl-HTML-Tagset-3.20-8.4 [ 62s] [65/108] installing perl-IO-Compress-Base-2.008-62.8 [ 62s] [66/108] installing perl-Module-Pluggable-3.60-62.8 [ 62s] [67/108] installing perl-Pod-Escapes-1.04-62.8 [ 62s] [68/108] installing perl-TimeDate-1.20-1.5 [ 62s] [69/108] installing eglibc-devel-2.13-2.16 [ 62s] [70/108] installing perl-Compress-Raw-Zlib-2.008-62.8 [ 62s] [71/108] installing perl-libs-5.12.1-62.8 [ 62s] [72/108] installing tar-1.17-5.7 [ 63s] [73/108] installing coreutils-6.9-9.9 [ 63s] [74/108] installing file-5.04-2.12 [ 63s] [75/108] installing libmount-2.20.2-7.6 [ 64s] [76/108] installing lzo-devel-2.03-2.18 [ 64s] [77/108] installing mpc-0.9-1.14 [ 64s] [78/108] installing openssl-1.0.1c-2.23 [ 64s] [79/108] installing perl-devel-5.12.1-62.8 [ 64s] [80/108] installing xz-lzma-compat-5.0.3-2.15 [ 64s] [81/108] installing cloog-ppl-0.15.9-1.29 [ 64s] [82/108] installing nss-sysinit-3.12.9-3.23 [ 65s] [83/108] installing python-base-2.7.1-2.9 [ 65s] [84/108] installing elfutils-0.152-2.35 [ 66s] [85/108] installing eglibc-common-2.13-2.16 [ 71s] [86/108] installing perl-ExtUtils-ParseXS-2.18-62.8 [ 71s] [87/108] installing perl-Pod-Simple-3.07-62.8 [ 71s] [88/108] installing perl-Test-Simple-0.80-62.8 [ 71s] [89/108] installing gawk-3.1.5-2.9 [ 71s] [90/108] installing gzip-1.3.14-3.7 [ 72s] [91/108] installing perl-IO-Compress-Zlib-2.008-62.8 [ 72s] [92/108] installing perl-Test-Harness-3.12-62.8 [ 72s] [93/108] installing build-2011.01.10a-1.9 [ 73s] [94/108] installing libcurl-7.28.1-3.21 [ 73s] [95/108] installing python-devel-2.7.1-2.9 [ 74s] [96/108] installing util-linux-2.20.2-7.6 [ 74s] warning: group tty does not exist - using root [ 74s] /bin/chown: `root:root': invalid user [ 74s] [97/108] installing cpp-4.5.3-2.14 [ 75s] [98/108] installing perl-ExtUtils-MakeMaker-6.36-62.8 [ 76s] [99/108] installing curl-7.28.1-3.21 [ 76s] [100/108] installing gcc-4.5.3-2.14 [ 77s] [101/108] installing perl-CPAN-1.9205-62.8 [ 78s] [102/108] installing autoconf-2.68-1.10 [ 79s] [103/108] installing gcc-c++-4.5.3-2.14 [ 80s] [104/108] installing rpm-4.9.1-4.10 [ 81s] [105/108] installing automake-1.11.1-3.12 [ 82s] [106/108] installing rpm-libs-4.9.1-4.10 [ 83s] [107/108] installing libtool-2.2.6b-2.15 [ 83s] [108/108] installing rpm-build-4.9.1-4.10 [ 84s] now finalizing build dir... [ 84s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 91s] ----------------------------------------------------------------- [ 91s] I have the following modifications for xcb-proto.spec: [ 91s] 4c4 [ 91s] < Release: 3 [ 91s] --- [ 91s] > Release: 4.8 [ 91s] ----------------------------------------------------------------- [ 91s] ----- building xcb-proto.spec (user abuild) [ 91s] ----------------------------------------------------------------- [ 91s] ----------------------------------------------------------------- [ 91s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://w01.vlan200.tizendev.org/Tizen:2.2:Main/emulator/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto' /home/abuild/rpmbuild/SOURCES/xcb-proto.spec [ 91s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.d5zXDT [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + LANG=C [ 91s] + export LANG [ 91s] + unset DISPLAY [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + rm -rf xcb-proto-1.7.1 [ 91s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xcb-proto-1.7.1.tar.gz [ 91s] + /bin/tar -xf - [ 91s] + STATUS=0 [ 91s] + '[' 0 -ne 0 ']' [ 91s] + cd xcb-proto-1.7.1 [ 91s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 91s] + exit 0 [ 91s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Xdhs77 [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd xcb-proto-1.7.1 [ 91s] + LANG=C [ 91s] + export LANG [ 91s] + unset DISPLAY [ 91s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 91s] + export CFLAGS [ 91s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 91s] + export CXXFLAGS [ 91s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 91s] + export FFLAGS [ 91s] + LD_AS_NEEDED=1 [ 91s] + export LD_AS_NEEDED [ 91s] + ./autogen.sh [ 92s] autoreconf: Entering directory `.' [ 92s] autoreconf: configure.ac: not using Gettext [ 93s] autoreconf: running: aclocal [ 93s] autoreconf: configure.ac: tracing [ 94s] autoreconf: configure.ac: not using Libtool [ 94s] autoreconf: running: /usr/bin/autoconf [ 94s] autoreconf: configure.ac: not using Autoheader [ 94s] autoreconf: running: automake --add-missing --copy --no-force [ 94s] configure.ac:9: installing `./install-sh' [ 94s] configure.ac:9: installing `./missing' [ 94s] autoreconf: Leaving directory `.' [ 94s] configure: WARNING: unrecognized options: --enable-maintainer-mode [ 94s] checking for a BSD-compatible install... /usr/bin/install -c [ 95s] checking whether build environment is sane... yes [ 95s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 95s] checking for gawk... gawk [ 95s] checking whether make sets $(MAKE)... yes [ 95s] checking for xmllint... no [ 95s] configure: WARNING: xmllint not found; unable to validate against schema. [ 95s] checking for a Python interpreter with version >= 2.5... python [ 95s] checking for python... /usr/bin/python [ 95s] checking for python version... 2.7 [ 95s] checking for python platform... linux3 [ 95s] checking for python script directory... ${prefix}/lib/python2.7/site-packages [ 95s] checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages [ 95s] configure: creating ./config.status [ 96s] config.status: creating Makefile [ 96s] config.status: creating src/Makefile [ 96s] config.status: creating xcbgen/Makefile [ 96s] config.status: creating xcb-proto.pc [ 96s] configure: WARNING: unrecognized options: --enable-maintainer-mode [ 96s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 96s] + export CFLAGS [ 96s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 96s] + export CXXFLAGS [ 96s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 96s] + export FFLAGS [ 96s] + autoreconf -v --install --force [ 96s] autoreconf: Entering directory `.' [ 96s] autoreconf: configure.ac: not using Gettext [ 97s] autoreconf: running: aclocal --force [ 97s] autoreconf: configure.ac: tracing [ 97s] autoreconf: configure.ac: not using Libtool [ 97s] autoreconf: running: /usr/bin/autoconf --force [ 98s] autoreconf: configure.ac: not using Autoheader [ 98s] autoreconf: running: automake --add-missing --copy --force-missing [ 98s] autoreconf: Leaving directory `.' [ 98s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-shared [ 98s] configure: WARNING: unrecognized options: --disable-shared [ 98s] checking for a BSD-compatible install... /usr/bin/install -c [ 99s] checking whether build environment is sane... yes [ 99s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 99s] checking for gawk... gawk [ 99s] checking whether make sets $(MAKE)... yes [ 99s] checking for xmllint... no [ 99s] configure: WARNING: xmllint not found; unable to validate against schema. [ 99s] checking for a Python interpreter with version >= 2.5... python [ 99s] checking for python... /usr/bin/python [ 99s] checking for python version... 2.7 [ 99s] checking for python platform... linux3 [ 99s] checking for python script directory... ${prefix}/lib/python2.7/site-packages [ 99s] checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages [ 99s] configure: creating ./config.status [ 99s] config.status: creating Makefile [ 99s] config.status: creating src/Makefile [ 99s] config.status: creating xcbgen/Makefile [ 99s] config.status: creating xcb-proto.pc [ 99s] configure: WARNING: unrecognized options: --disable-shared [ 99s] + make -j4 [ 99s] Making all in src [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 99s] make[1]: Nothing to be done for `all'. [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 99s] Making all in xcbgen [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 99s] make[1]: Nothing to be done for `all'. [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 99s] make[1]: Nothing to be done for `all-am'. [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 99s] + exit 0 [ 99s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.m6cycS [ 99s] + umask 022 [ 99s] + cd /home/abuild/rpmbuild/BUILD [ 99s] + cd xcb-proto-1.7.1 [ 99s] + LANG=C [ 99s] + export LANG [ 99s] + unset DISPLAY [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 [ 99s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 [ 99s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 install [ 99s] Making install in src [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 99s] make[2]: Nothing to be done for `install-exec-am'. [ 99s] test -z "/usr/share/xcb" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/share/xcb" [ 99s] /usr/bin/install -c -m 644 xcb.xsd xproto.xml bigreq.xml composite.xml damage.xml dpms.xml dri2.xml ge.xml glx.xml randr.xml record.xml render.xml res.xml screensaver.xml shape.xml shm.xml sync.xml xc_misc.xml xevie.xml xf86dri.xml xf86vidmode.xml xfixes.xml xinerama.xml xinput.xml xkb.xml xprint.xml xselinux.xml xtest.xml xv.xml xvmc.xml '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/share/xcb' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 99s] Making install in xcbgen [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 99s] make[2]: Nothing to be done for `install-exec-am'. [ 99s] test -z "/usr/lib/python2.7/site-packages/xcbgen" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/lib/python2.7/site-packages/xcbgen" [ 99s] /usr/bin/install -c -m 644 __init__.py error.py expr.py matcher.py state.py xtypes.py '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/lib/python2.7/site-packages/xcbgen' [ 99s] Byte-compiling python modules... [ 99s] __init__.pyerror.pyexpr.pymatcher.pystate.pyxtypes.py [ 99s] Byte-compiling python modules (optimized versions) ... [ 99s] __init__.pyerror.pyexpr.pymatcher.pystate.pyxtypes.py [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 99s] make[2]: Nothing to be done for `install-exec-am'. [ 99s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/lib/pkgconfig" [ 99s] /usr/bin/install -c -m 644 xcb-proto.pc '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/lib/pkgconfig' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 99s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/share/info/dir [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 -regex '.*\.la$' [ 99s] + xargs rm -f -- [ 99s] + xargs rm -f -- [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 -regex '.*\.a$' [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/share/info [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/share/doc [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/share/doc/xcb-proto [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/share/gtk-doc [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/share/man [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 -regex '.*/man/man./.*.[0-9]' [ 99s] + xargs rm -f -- [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 -regex '.*/man/../man./.*.[0-9]' [ 99s] + xargs rm -f -- [ 99s] + xargs rm -f -- [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 -regex '.*/man/man./.*.[0-9]pm' [ 99s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1 [ 99s] + /usr/lib/rpm/check-buildroot [ 99s] + /usr/lib/rpm//brp-compress [ 99s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 99s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 99s] + /usr/lib/rpm/brp-python-bytecompile [ 100s] Bytecompiling .py files below /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386/usr/lib/python2.7/ using /usr/bin/python2.7 [ 100s] + /usr/lib/rpm/brp-python-hardlink [ 100s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 [ 100s] Processing files: xcb-proto-1.7.1-4.8.i586 [ 100s] Provides: pkgconfig(xcb-proto) = 1.7.1 [ 100s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 100s] Requires: /usr/bin/pkg-config python(abi) = 2.7 [ 100s] Processing files: xcb-proto-debuginfo-1.7.1-4.8.i586 [ 100s] Processing files: xcb-proto-debugsource-1.7.1-4.8.i586 [ 100s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 [ 100s] Wrote: /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-4.8.src.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-proto-1.7.1-4.8.i586.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debuginfo-1.7.1-4.8.i586.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debugsource-1.7.1-4.8.i586.rpm [ 100s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.17wJ3I [ 100s] + umask 022 [ 100s] + cd /home/abuild/rpmbuild/BUILD [ 100s] + cd xcb-proto-1.7.1 [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.i386 [ 100s] + exit 0 [ 100s] ... checking for files with abuild user/group [ 100s] ... creating baselibs [ 100s] ... comparing built packages with the former built [ 100s] /usr/lib/build/rpm-check.sh [ 100s] compare /.build.oldpackages/xcb-proto-1.7.1-4.7.src.rpm /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-4.8.src.rpm [ 100s] compare /.build.oldpackages/xcb-proto-1.7.1-4.7.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-proto-1.7.1-4.8.i586.rpm [ 100s] --- /tmp/tmp.KPi9w1N9kv 2013-11-07 04:45:55.879022443 +0000 [ 100s] +++ /tmp/tmp.xXaYWGoIJx 2013-11-07 04:45:55.891022443 +0000 [ 100s] @@ -5,7 +5,7 @@ [ 100s] This package contains the protocol descriptions themselves. Language [ 100s] bindings use these protocol descriptions to generate code for marshalling [ 100s] the protocol. [ 100s] - tizen Tizen:2.2:Main / emulator obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/emulator/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto MIT MIT [ 100s] + tizen Tizen:2.2:Main / emulator obs://w01.vlan200.tizendev.org/Tizen:2.2:Main/emulator/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto MIT MIT [ 100s] Development/Libraries http://xcb.freedesktop.org/ (none) (none) (none) [ 100s] (none) 4.9.1 i586-tizen-linux-gnu [ 100s] cpio gzip 9 [ 100s] RPM meta information is different [ 100s] compare /.build.oldpackages/xcb-proto-debuginfo-1.7.1-4.7.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debuginfo-1.7.1-4.8.i586.rpm [ 100s] --- /tmp/tmp.VjbwBr7Tgh 2013-11-07 04:45:55.955022444 +0000 [ 100s] +++ /tmp/tmp.gLJ0ulRDfF 2013-11-07 04:45:55.967022444 +0000 [ 100s] @@ -3,7 +3,7 @@ [ 100s] This package provides debug information for package xcb-proto. [ 100s] Debug information is useful when developing applications that use this [ 100s] package or when debugging this package. [ 100s] - tizen Tizen:2.2:Main / emulator obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/emulator/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto MIT MIT [ 100s] + tizen Tizen:2.2:Main / emulator obs://w01.vlan200.tizendev.org/Tizen:2.2:Main/emulator/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto MIT MIT [ 100s] Development/Debug http://xcb.freedesktop.org/ (none) (none) (none) [ 100s] (none) 4.9.1 i586-tizen-linux-gnu [ 100s] cpio gzip 9 [ 100s] RPM meta information is different [ 100s] compare /.build.oldpackages/xcb-proto-debugsource-1.7.1-4.7.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debugsource-1.7.1-4.8.i586.rpm [ 101s] --- /tmp/tmp.zzg16iHM9d 2013-11-07 04:45:56.007022445 +0000 [ 101s] +++ /tmp/tmp.9NFRSgUtfk 2013-11-07 04:45:56.019022445 +0000 [ 101s] @@ -3,7 +3,7 @@ [ 101s] This package provides debug sources for package xcb-proto. [ 101s] Debug sources are useful when developing applications that use this [ 101s] package or when debugging this package. [ 101s] - tizen Tizen:2.2:Main / emulator obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/emulator/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto MIT MIT [ 101s] + tizen Tizen:2.2:Main / emulator obs://w01.vlan200.tizendev.org/Tizen:2.2:Main/emulator/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto MIT MIT [ 101s] Development/Debug http://xcb.freedesktop.org/ (none) (none) (none) [ 101s] (none) 4.9.1 i586-tizen-linux-gnu [ 101s] cpio gzip 9 [ 101s] RPM meta information is different [ 101s] ... saving built statistics [ 101s] ... saving built packages [ 101s] /home/abuild/rpmbuild/RPMS/i586/xcb-proto-1.7.1-4.8.i586.rpm [ 101s] /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debuginfo-1.7.1-4.8.i586.rpm [ 101s] /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debugsource-1.7.1-4.8.i586.rpm [ 101s] /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-4.8.src.rpm [ 101s] /home/abuild/rpmbuild/OTHER/_statistics [ 101s] [ 101s] w01 finished "build xcb-proto.spec" at Thu Nov 7 04:45:56 UTC 2013. [ 101s] [ 108s] [ 100.928249] SysRq : Power Off [ 109s] [ 101.036296] Power down. [ 109s] build: extracting built packages... [ 109s] xcb-proto-1.7.1-4.8.i586.rpm [ 109s] xcb-proto-debuginfo-1.7.1-4.8.i586.rpm [ 109s] xcb-proto-debugsource-1.7.1-4.8.i586.rpm [ 109s] xcb-proto-1.7.1-4.8.src.rpm [ 109s] _statistics