[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9 [ 0s] Using BUILD_ARCH=riscv64 [ 0s] [ 0s] [ 0s] f02de89838c5 started "build python3-ply.spec" at Sat Jul 12 19:03:24 UTC 2025. [ 0s] [ 0s] Building python3-ply for project 'Tizen-Base-Toolchain' repository 'standard' arch 'riscv64' srcmd5 '5867fa1722d1802c82e3ee69978a31ca' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9/.build-srcdir/python3-ply.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9/.build-srcdir/python3-ply.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/9/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9/.build-srcdir/python3-ply.spec build ... [ 4s] registering binfmt handlers for cross build [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] [1/43] preinstalling libmagic-data... [ 5s] [2/43] preinstalling libncurses... [ 5s] [3/43] preinstalling setup... [ 5s] [4/43] preinstalling filesystem... [ 5s] [5/43] preinstalling glibc... [ 6s] [6/43] preinstalling bash... [ 6s] [7/43] preinstalling diffutils... [ 6s] [8/43] preinstalling grep... [ 6s] [9/43] preinstalling libattr... [ 6s] [10/43] preinstalling libblkid... [ 6s] [11/43] preinstalling libbz2... [ 6s] [12/43] preinstalling libcap... [ 6s] [13/43] preinstalling libfreebl3... [ 6s] [14/43] preinstalling libgcc... [ 6s] [15/43] preinstalling liblua... [ 6s] [16/43] preinstalling liblzma... [ 6s] [17/43] preinstalling libpopt... [ 6s] [18/43] preinstalling libreadline... [ 6s] [19/43] preinstalling libsmack... [ 6s] [20/43] preinstalling libsqlite... [ 6s] [21/43] preinstalling libuuid... [ 6s] [22/43] preinstalling libxcrypt... [ 6s] [23/43] preinstalling libxml2... [ 6s] [24/43] preinstalling libzstd1... [ 6s] [25/43] preinstalling nspr... [ 7s] [26/43] preinstalling sed... [ 7s] [27/43] preinstalling zlib... [ 7s] [28/43] preinstalling clang-accel-x86_64-riscv64... [ 279s] [29/43] preinstalling qemu-accel-x86_64-riscv64... [ 319s] [30/43] preinstalling qemu-linux-user-x86_64-cross... [ 336s] [31/43] preinstalling coreutils... [ 336s] [32/43] preinstalling libacl... [ 336s] [33/43] preinstalling libelf... [ 336s] [34/43] preinstalling libmount... [ 336s] [35/43] preinstalling smack... [ 336s] [36/43] preinstalling bzip2... [ 336s] [37/43] preinstalling libmagic... [ 336s] [38/43] preinstalling tar... [ 336s] [39/43] preinstalling util-linux... [ 337s] [40/43] preinstalling util-linux-su... [ 337s] [41/43] preinstalling nss... [ 337s] [42/43] preinstalling libsoftokn3... [ 337s] [43/43] preinstalling rpm... [ 338s] running qemu-linux-user-x86_64-cross postinstall script [ 338s] running qemu-accel-x86_64-riscv64 postinstall script [ 338s] mv: cannot stat `/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 338s] running clang-accel-x86_64-riscv64 postinstall script [ 338s] running setup postinstall script [ 338s] chroot: failed to run command '': No such file or directory [ 338s] initializing rpm db... [ 338s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 338s] breaking dependency libxcrypt-devel -> glibc-devel [ 338s] cycle: libsoftokn3 -> nss [ 338s] breaking dependency nss -> libsoftokn3 [ 338s] done [ 338s] querying package ids... [ 339s] [1/106] cumulate libmagic-data-5.45-1.3 [ 339s] [2/106] cumulate setup-0.9-1.2 [ 339s] [3/106] cumulate filesystem-3.1-1.1 [ 339s] [4/106] cumulate glibc-2.40-1.6 [ 339s] [5/106] cumulate bash-3.2.57-1.1 [ 339s] [6/106] cumulate cpio-2.8-1.1 [ 339s] [7/106] cumulate diffutils-3.10-1.1 [ 339s] [8/106] cumulate fdupes-2.2.1-1.4 [ 339s] [9/106] cumulate findutils-4.3.8-1.3 [ 339s] [10/106] cumulate gdbm-1.8.3-1.6 [ 339s] [11/106] cumulate hostname-3.23-1.1 [ 339s] [12/106] cumulate libatomic-14.2.0-1.6 [ 339s] [13/106] cumulate libattr-2.5.1-1.3 [ 339s] [14/106] cumulate libblkid-2.39.3-1.4 [ 339s] [15/106] cumulate libbz2-1.0.8-1.4 [ 339s] [16/106] cumulate libcap-2.73-1.5 [ 339s] [17/106] cumulate libexpat-2.6.2-1.5 [ 339s] [18/106] cumulate libffi-3.4.7-1.5 [ 339s] [19/106] cumulate libfreebl3-3.109-1.6 [ 339s] [20/106] cumulate libgcc-14.2.0-1.6 [ 339s] [21/106] cumulate libgomp-14.2.0-1.6 [ 339s] [22/106] cumulate libitm-14.2.0-1.6 [ 339s] [23/106] cumulate libltdl-2.4.7-1.6 [ 339s] [24/106] cumulate liblua-5.1.5-1.3 [ 339s] [25/106] cumulate liblzma-5.6.3-1.6 [ 339s] [26/106] cumulate libopenssl3-3.5.0-1.6 [ 339s] [27/106] cumulate libpcre-8.45-1.3 [ 339s] [28/106] cumulate libpopt-1.16-1.3 [ 339s] [29/106] cumulate libpython3_131_0-3.13.1-1.5 [ 339s] [30/106] cumulate libsmack-1.3.1-1.3 [ 339s] [31/106] cumulate libsmartcols-2.39.3-1.4 [ 339s] [32/106] cumulate libsqlite-3.48.0-1.3 [ 339s] [33/106] cumulate libuuid-2.39.3-1.4 [ 339s] [34/106] cumulate libxcrypt-4.4.36-1.6 [ 339s] [35/106] cumulate libxml2-2.13.5-1.5 [ 339s] [36/106] cumulate libzstd1-1.5.6-1.6 [ 339s] [37/106] cumulate m4-1.4.19-1.1 [ 339s] [38/106] cumulate net-tools-2.0_20121208git-1.3 [ 339s] [39/106] cumulate nspr-4.36-1.3 [ 339s] [40/106] cumulate patch-2.7.6-1.3 [ 339s] [41/106] cumulate pkg-config-0.29.2-1.4 [ 339s] [42/106] cumulate sed-4.1c-1.3 [ 339s] [43/106] cumulate update-alternatives-1.22.2-1.1 [ 339s] [44/106] cumulate which-2.17-1.1 [ 339s] [45/106] cumulate zlib-1.3.1-1.5 [ 339s] [46/106] cumulate build-compare-2023.06.18-1.1 [ 339s] [47/106] cumulate clang-accel-x86_64-riscv64-0.4-1.1 [ 339s] [48/106] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 339s] [49/106] cumulate qemu-linux-user-x86_64-cross-8.2.2.1-1.1 [ 339s] [50/106] cumulate binutils-libs-2.43-1.6 [ 339s] [51/106] cumulate coreutils-6.9-14.1 [ 339s] [52/106] cumulate cpp-14.2.0-1.6 [ 339s] [53/106] cumulate gawk-3.1.5-1.1 [ 339s] [54/106] cumulate gcc-c++-14.2.0-1.6 [ 339s] [55/106] cumulate grep-2.5.2-1.3 [ 339s] [56/106] cumulate libacl-2.3.2-1.3 [ 339s] [57/106] cumulate libelf-0.189-1.6 [ 339s] [58/106] cumulate libgfortran-14.2.0-1.6 [ 339s] [59/106] cumulate libmount-2.39.3-1.4 [ 339s] [60/106] cumulate libstdc++-14.2.0-1.6 [ 339s] [61/106] cumulate make-4.4.1-1.3 [ 339s] [62/106] cumulate nss-certs-3.109-1.6 [ 339s] [63/106] cumulate smack-1.3.1-1.3 [ 339s] [64/106] cumulate bzip2-1.0.8-1.4 [ 339s] [65/106] cumulate libfdisk-2.39.3-1.4 [ 339s] [66/106] cumulate libmagic-5.45-1.3 [ 339s] [67/106] cumulate xz-5.6.3-1.6 [ 339s] [68/106] cumulate perl-5.38.0-1.5 [ 339s] [69/106] cumulate build-mkbaselibs-20120927-1.1 [ 339s] [70/106] cumulate libstdc++-devel-14.2.0-1.6 [ 339s] [71/106] cumulate linux-glibc-devel-6.6-1.6 [ 339s] [72/106] cumulate binutils-2.43-1.6 [ 339s] [73/106] cumulate file-5.45-1.3 [ 339s] [74/106] cumulate tar-1.17-1.1 [ 339s] [75/106] cumulate terminfo-base-full-6.4-1.6 [ 339s] [76/106] cumulate autoconf-2.71-1.6 [ 339s] [77/106] cumulate glibc-locale-2.40-1.6 [ 339s] [78/106] cumulate gzip-1.3.12-1.3 [ 339s] [79/106] cumulate libcc1-14.2.0-1.6 [ 339s] [80/106] cumulate libubsan-14.2.0-1.6 [ 339s] [81/106] cumulate pam-1.1.6-1.4 [ 339s] [82/106] cumulate tzdata-2024b-1.1 [ 339s] [83/106] cumulate libdw-0.189-1.6 [ 339s] [84/106] cumulate libarchive-3.7.7-1.5 [ 339s] [85/106] cumulate automake-1.16.5-1.6 [ 339s] [86/106] cumulate libasm-0.189-1.6 [ 339s] [87/106] cumulate libncurses6-6.4-1.6 [ 339s] [88/106] cumulate build-20120927-1.1 [ 339s] [89/106] cumulate gcc-14.2.0-1.6 [ 339s] [90/106] cumulate libncurses-6.4-1.6 [ 339s] [91/106] cumulate less-668-1.1 [ 339s] [92/106] cumulate libreadline-5.2-1.4 [ 339s] [93/106] cumulate qemu-accel-x86_64-riscv64-0.4-1.1 [ 339s] [94/106] cumulate libtool-2.4.7-1.6 [ 339s] [95/106] cumulate elfutils-0.189-1.6 [ 339s] [96/106] cumulate python3-base-3.13.1-1.5 [ 339s] [97/106] cumulate util-linux-2.39.3-1.4 [ 339s] [98/106] cumulate python3-3.13.1-1.1 [ 339s] [99/106] cumulate util-linux-su-2.39.3-1.4 [ 339s] [100/106] cumulate python3-setuptools-69.0.2-1.1 [ 339s] [101/106] cumulate libxcrypt-devel-4.4.36-1.6 [ 339s] [102/106] cumulate nss-3.109-1.6 [ 339s] [103/106] cumulate glibc-devel-2.40-1.6 [ 339s] [104/106] cumulate libsoftokn3-3.109-1.6 [ 339s] [105/106] cumulate rpm-4.14.1.1-1.6 [ 339s] [106/106] cumulate rpm-build-4.14.1.1-1.6 [ 339s] now installing cumulated packages [ 448s] Preparing... ######################################## [ 448s] Updating / installing... [ 448s] setup-0.9-1.2 ######################################## [ 448s] filesystem-3.1-1.1 ######################################## [ 449s] glibc-2.40-1.6 ######################################## [ 449s] bash-3.2.57-1.1 ######################################## [ 449s] zlib-1.3.1-1.5 ######################################## [ 451s] coreutils-6.9-14.1 ######################################## [ 451s] libbz2-1.0.8-1.4 ######################################## [ 451s] liblzma-5.6.3-1.6 ######################################## [ 452s] libelf-0.189-1.6 ######################################## [ 452s] libgcc-14.2.0-1.6 ######################################## [ 452s] libstdc++-14.2.0-1.6 ######################################## [ 453s] libdw-0.189-1.6 ######################################## [ 453s] libxcrypt-4.4.36-1.6 ######################################## [ 454s] libblkid-2.39.3-1.4 ######################################## [ 454s] nspr-4.36-1.3 ######################################## [ 454s] pam-1.1.6-1.4 ######################################## [ 455s] gdbm-1.8.3-1.6 ######################################## [ 467s] perl-5.38.0-1.5 ######################################## [ 467s] libcap-2.73-1.5 ######################################## [ 468s] libfreebl3-3.109-1.6 ######################################## [ 468s] liblua-5.1.5-1.3 ######################################## [ 468s] libopenssl3-3.5.0-1.6 ######################################## [ 468s] libpopt-1.16-1.3 ######################################## [ 469s] libsqlite-3.48.0-1.3 ######################################## [ 469s] libuuid-2.39.3-1.4 ######################################## [ 470s] libzstd1-1.5.6-1.6 ######################################## [ 470s] libfdisk-2.39.3-1.4 ######################################## [ 470s] build-mkbaselibs-20120927-1.1 ######################################## [ 470s] nss-certs-3.109-1.6 ######################################## [ 470s] libsoftokn3-3.109-1.6 ######################################## [ 471s] nss-3.109-1.6 ######################################## [ 471s] libmount-2.39.3-1.4 ######################################## [ 471s] libasm-0.189-1.6 ######################################## [ 471s] libcc1-14.2.0-1.6 ######################################## [ 472s] libubsan-14.2.0-1.6 ######################################## [ 472s] libgfortran-14.2.0-1.6 ######################################## [ 472s] xz-5.6.3-1.6 ######################################## [ 472s] bzip2-1.0.8-1.4 ######################################## [ 473s] linux-glibc-devel-6.6-1.6 ######################################## [ 473s] terminfo-base-full-6.4-1.6 ######################################## [ 473s] libncurses6-6.4-1.6 ######################################## [ 473s] libreadline-5.2-1.4 ######################################## [ 473s] gzip-1.3.12-1.3 ######################################## [ 474s] binutils-libs-2.43-1.6 ######################################## [ 477s] binutils-2.43-1.6 ######################################## [ 477s] make-4.4.1-1.3 ######################################## [ 477s] findutils-4.3.8-1.3 ######################################## [ 477s] libatomic-14.2.0-1.6 ######################################## [ 478s] libattr-2.5.1-1.3 ######################################## [ 478s] libacl-2.3.2-1.3 ######################################## [ 479s] tar-1.17-1.1 ######################################## [ 479s] libexpat-2.6.2-1.5 ######################################## [ 479s] libffi-3.4.7-1.5 ######################################## [ 479s] libgomp-14.2.0-1.6 ######################################## [ 480s] libitm-14.2.0-1.6 ######################################## [ 493s] gcc-14.2.0-1.6 ######################################## [ 493s] libltdl-2.4.7-1.6 ######################################## [ 494s] libpcre-8.45-1.3 ######################################## [ 494s] libpython3_131_0-3.13.1-1.5 ######################################## [ 498s] python3-base-3.13.1-1.5 ######################################## [ 499s] python3-3.13.1-1.1 ######################################## [ 499s] libsmack-1.3.1-1.3 ######################################## [ 499s] libsmartcols-2.39.3-1.4 ######################################## [ 500s] libxml2-2.13.5-1.5 ######################################## [ 500s] libarchive-3.7.7-1.5 ######################################## [ 500s] m4-1.4.19-1.1 ######################################## [ 501s] autoconf-2.71-1.6 ######################################## [ 501s] automake-1.16.5-1.6 ######################################## [ 501s] patch-2.7.6-1.3 ######################################## [ 501s] pkg-config-0.29.2-1.4 ######################################## [ 501s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 501s] glibc-devel-2.40-1.6 ######################################## [ 501s] sed-4.1c-1.3 ######################################## [ 502s] util-linux-2.39.3-1.4 ######################################## [ 503s] libmagic-data-5.45-1.3 ######################################## [ 503s] libmagic-5.45-1.3 ######################################## [ 504s] rpm-4.14.1.1-1.6 ######################################## [ 504s] rpm-build-4.14.1.1-1.6 ######################################## [ 504s] file-5.45-1.3 ######################################## [ 504s] util-linux-su-2.39.3-1.4 ######################################## [ 504s] libtool-2.4.7-1.6 ######################################## [ 504s] smack-1.3.1-1.3 ######################################## [ 505s] python3-setuptools-69.0.2-1.1 ######################################## [ 505s] grep-2.5.2-1.3 ######################################## [ 548s] qemu-accel-x86_64-riscv64-0.4-1.1 ######################################## [ 549s] build-20120927-1.1 ######################################## [ 549s] libncurses-6.4-1.6 ######################################## [ 549s] less-668-1.1 ######################################## [ 550s] elfutils-0.189-1.6 ######################################## [ 556s] libstdc++-devel-14.2.0-1.6 ######################################## [ 558s] glibc-locale-2.40-1.6 ######################################## [ 558s] tzdata-2024b-1.1 ######################################## [ 565s] cpp-14.2.0-1.6 ######################################## [ 572s] gcc-c++-14.2.0-1.6 ######################################## [ 572s] build-compare-2023.06.18-1.1 ######################################## [ 865s] clang-accel-x86_64-riscv64-0.4-1.1 ######################################## [ 870s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 885s] qemu-linux-user-x86_64-cross-8.2.2.1-1######################################## [ 885s] gawk-3.1.5-1.1 ######################################## [ 885s] cpio-2.8-1.1 ######################################## [ 886s] diffutils-3.10-1.1 ######################################## [ 886s] fdupes-2.2.1-1.4 ######################################## [ 886s] hostname-3.23-1.1 ######################################## [ 886s] net-tools-2.0_20121208git-1.3 ######################################## [ 886s] update-alternatives-1.22.2-1.1 ######################################## [ 886s] which-2.17-1.1 ######################################## [ 886s] now finalizing build dir... [ 888s] ----------------------------------------------------------------- [ 888s] I have the following modifications for python3-ply.spec: [ 888s] 4c4 [ 888s] < Release: 0 [ 888s] --- [ 888s] > Release: 1.1 [ 888s] build target is riscv64-tizen-linux [ 888s] ----------------------------------------------------------------- [ 888s] ----- building python3-ply.spec (user abuild) [ 888s] ----------------------------------------------------------------- [ 888s] ----------------------------------------------------------------- [ 888s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=riscv64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/5867fa1722d1802c82e3ee69978a31ca-python3-ply' /home/abuild/rpmbuild/SOURCES/python3-ply.spec [ 889s] Building target platforms: riscv64-tizen-linux [ 889s] Building for target riscv64-tizen-linux [ 889s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.jL2Z5C [ 889s] + umask 022 [ 889s] + cd /home/abuild/rpmbuild/BUILD [ 889s] + cd /home/abuild/rpmbuild/BUILD [ 889s] + rm -rf ply-3.11 [ 889s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ply-3.11.tar.gz [ 889s] + /bin/tar -xof - [ 889s] + STATUS=0 [ 889s] + '[' 0 -ne 0 ']' [ 889s] + cd ply-3.11 [ 889s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 889s] + echo 'Patch #0 (0001-Add-packaging-files.patch):' [ 889s] Patch #0 (0001-Add-packaging-files.patch): [ 889s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 889s] patching file LICENSE [ 889s] + cp /home/abuild/rpmbuild/SOURCES/python3-ply.manifest . [ 889s] + chmod -x test/testlex.py [ 889s] + find example -type f -name '*.py' -exec sed -i 's|#!/usr/bin/env python3||' '{}' + [ 889s] + _target= [ 889s] + _symlinks=0 [ 889s] + _files=() [ 889s] + fdupes -q -n -r example [ 889s] + read _file [ 889s] + exit 0 [ 889s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.NTbU8p [ 889s] + umask 022 [ 889s] + cd /home/abuild/rpmbuild/BUILD [ 889s] + cd ply-3.11 [ 889s] + ref=/usr/lib/rpm [ 889s] + mints=0 [ 889s] + case $(uname -m) in [ 889s] ++ uname -m [ 890s] + mints=20160911 [ 890s] + for s in guess sub [ 890s] ++ find -maxdepth 8 -name config.guess [ 890s] + for s in guess sub [ 890s] ++ find -maxdepth 8 -name config.sub [ 890s] + LANG=C [ 890s] + export LANG [ 890s] + unset DISPLAY [ 890s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gcv -g' [ 890s] + export CFLAGS [ 890s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gcv -g' [ 890s] + export CXXFLAGS [ 890s] + FFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gcv -g -I%_fmoddir' [ 890s] + export FFLAGS [ 890s] + LDFLAGS= [ 890s] + export LDFLAGS [ 890s] + /usr/bin/python3 setup.py build [ 894s] /usr/lib/python3.13/site-packages/setuptools/dist.py:472: SetuptoolsDeprecationWarning: Invalid dash-separated options [ 894s] !! [ 894s] [ 894s] ******************************************************************************** [ 894s] Usage of dash-separated 'description-file' will not be supported in future [ 894s] versions. Please use the underscore name 'description_file' instead. [ 894s] [ 894s] This deprecation is overdue, please update your project and remove deprecated [ 894s] calls to avoid build errors in the future. [ 894s] [ 894s] See https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details. [ 894s] ******************************************************************************** [ 894s] [ 894s] !! [ 894s] opt = self.warn_dash_deprecation(opt, section) [ 894s] running build [ 894s] running build_py [ 894s] creating build [ 894s] creating build/lib [ 894s] creating build/lib/ply [ 894s] copying ply/yacc.py -> build/lib/ply [ 894s] copying ply/__init__.py -> build/lib/ply [ 894s] copying ply/lex.py -> build/lib/ply [ 894s] copying ply/cpp.py -> build/lib/ply [ 895s] copying ply/ctokens.py -> build/lib/ply [ 895s] copying ply/ygen.py -> build/lib/ply [ 895s] + exit 0 [ 895s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.HNbp49 [ 895s] + umask 022 [ 895s] + cd /home/abuild/rpmbuild/BUILD [ 895s] + cd ply-3.11 [ 895s] + LANG=C [ 895s] + export LANG [ 895s] + unset DISPLAY [ 895s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64 [ 895s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64 [ 895s] + /usr/bin/python3 setup.py install --prefix=/usr --root=/home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64 [ 897s] /usr/lib/python3.13/site-packages/setuptools/dist.py:472: SetuptoolsDeprecationWarning: Invalid dash-separated options [ 897s] !! [ 897s] [ 897s] ******************************************************************************** [ 897s] Usage of dash-separated 'description-file' will not be supported in future [ 897s] versions. Please use the underscore name 'description_file' instead. [ 897s] [ 897s] This deprecation is overdue, please update your project and remove deprecated [ 897s] calls to avoid build errors in the future. [ 897s] [ 897s] See https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details. [ 897s] ******************************************************************************** [ 897s] [ 897s] !! [ 897s] opt = self.warn_dash_deprecation(opt, section) [ 897s] running install [ 897s] /usr/lib/python3.13/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. [ 897s] !! [ 897s] [ 897s] ******************************************************************************** [ 897s] Please avoid running ``setup.py`` directly. [ 897s] Instead, use pypa/build, pypa/installer or other [ 897s] standards-based tools. [ 897s] [ 897s] See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. [ 897s] ******************************************************************************** [ 897s] [ 897s] !! [ 897s] self.initialize_options() [ 898s] running build [ 898s] running build_py [ 898s] running install_lib [ 898s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr [ 898s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib [ 898s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13 [ 898s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages [ 898s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply [ 898s] copying build/lib/ply/yacc.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply [ 898s] copying build/lib/ply/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply [ 898s] copying build/lib/ply/lex.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply [ 898s] copying build/lib/ply/cpp.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply [ 898s] copying build/lib/ply/ctokens.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply [ 898s] copying build/lib/ply/ygen.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply [ 898s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply/yacc.py to yacc.cpython-313.pyc [ 898s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply/__init__.py to __init__.cpython-313.pyc [ 898s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply/lex.py to lex.cpython-313.pyc [ 898s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply/cpp.py to cpp.cpython-313.pyc [ 899s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply/ctokens.py to ctokens.cpython-313.pyc [ 899s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply/ygen.py to ygen.cpython-313.pyc [ 899s] running install_egg_info [ 899s] running egg_info [ 899s] writing ply.egg-info/PKG-INFO [ 899s] writing dependency_links to ply.egg-info/dependency_links.txt [ 899s] writing top-level names to ply.egg-info/top_level.txt [ 899s] reading manifest file 'ply.egg-info/SOURCES.txt' [ 899s] reading manifest template 'MANIFEST.in' [ 899s] warning: no previously-included files matching '*.pyc' found anywhere in distribution [ 899s] adding license file 'LICENSE' [ 899s] writing manifest file 'ply.egg-info/SOURCES.txt' [ 899s] Copying ply.egg-info to /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages/ply-3.11-py3.13.egg-info [ 899s] running install_scripts [ 901s] + _target= [ 901s] + _symlinks=0 [ 901s] + _files=() [ 901s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/lib/python3.13/site-packages [ 901s] + read _file [ 901s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 3.11-1.1 --unique-debug-src-base python3-ply-3.11-1.1.riscv64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/ply-3.11 [ 901s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ply-3.11/python3-ply-debuginfo.manifest [ 901s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ply-3.11/python3-ply-debugsource.manifest [ 901s] + /usr/lib/rpm/check-buildroot [ 901s] + /usr/lib/rpm//brp-compress [ 901s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 901s] + /usr/lib/rpm/brp-python-hardlink [ 901s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64 [ 902s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/ply-3.11/isu.list [ 902s] ~/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64 ~/rpmbuild/BUILD/ply-3.11 [ 902s] ~/rpmbuild/BUILD/ply-3.11 [ 902s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 902s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.h2Z83R [ 902s] Processing files: python3-ply-3.11-1.1.noarch [ 902s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 902s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 902s] [ 902s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.avfNF8 [ 902s] + umask 022 [ 902s] + cd /home/abuild/rpmbuild/BUILD [ 902s] + cd ply-3.11 [ 902s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/share/licenses/python3-ply [ 902s] + export LC_ALL=C [ 902s] + LC_ALL=C [ 902s] + export LICENSEDIR [ 902s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/share/licenses/python3-ply [ 902s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64/usr/share/licenses/python3-ply [ 902s] + exit 0 [ 902s] Provides: python3-ply = 3.11-1.1 [ 902s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 902s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64 [ 902s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-ply-3.11-1.1.src.rpm [ 902s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-ply-3.11-1.1.noarch.rpm [ 902s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.GooD2h [ 902s] + umask 022 [ 902s] + cd /home/abuild/rpmbuild/BUILD [ 902s] + cd ply-3.11 [ 902s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.riscv64 [ 902s] + exit 0 [ 902s] ... checking for files with abuild user/group [ 902s] ... creating baselibs [ 904s] [ 904s] f02de89838c5 finished "build python3-ply.spec" at Sat Jul 12 19:18:28 UTC 2025. [ 904s]