[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.16 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] b3cd3554859e started "build libpciaccess.spec" at Fri May 16 09:28:22 UTC 2025. [ 0s] [ 0s] Building libpciaccess for project 'Tizen-Base-X-ASAN' repository 'standard' arch 'aarch64' srcmd5 '7325d11798514e0e18cf29ffc56035ff' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.16/.build-srcdir/libpciaccess.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.16/.build-srcdir/libpciaccess.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/16/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.16/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.16/.build-srcdir/libpciaccess.spec build ... [ 2s] registering binfmt handlers for cross build [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] [1/47] preinstalling libmagic-data... [ 3s] [2/47] preinstalling libncurses... [ 3s] [3/47] preinstalling setup... [ 3s] [4/47] preinstalling filesystem... [ 3s] [5/47] preinstalling glibc... [ 3s] [6/47] preinstalling diffutils... [ 3s] [7/47] preinstalling libgcc... [ 4s] [8/47] preinstalling libstdc++... [ 4s] [9/47] preinstalling libasan... [ 4s] [10/47] preinstalling findutils... [ 4s] [11/47] preinstalling grep... [ 4s] [12/47] preinstalling libattr... [ 4s] [13/47] preinstalling libbz2... [ 4s] [14/47] preinstalling libcap... [ 4s] [15/47] preinstalling liblua... [ 4s] [16/47] preinstalling libpopt... [ 4s] [17/47] preinstalling libsmack... [ 4s] [18/47] preinstalling libuuid... [ 4s] [19/47] preinstalling libxcrypt... [ 4s] [20/47] preinstalling nspr... [ 4s] [21/47] preinstalling sed... [ 5s] [22/47] preinstalling zlib... [ 5s] [23/47] preinstalling bash... [ 5s] [24/47] preinstalling libblkid... [ 5s] [25/47] preinstalling libfreebl3... [ 5s] [26/47] preinstalling liblzma... [ 5s] [27/47] preinstalling libreadline... [ 5s] [28/47] preinstalling libsqlite... [ 5s] [29/47] preinstalling libxml2... [ 5s] [30/47] preinstalling libzstd1... [ 5s] [31/47] preinstalling qemu-accel-x86_64-aarch64... [ 9s] [32/47] preinstalling qemu-linux-user-x86_64-cross... [ 12s] [33/47] preinstalling asan-build-env... [ 12s] [34/47] preinstalling coreutils... [ 12s] [35/47] preinstalling libacl... [ 12s] [36/47] preinstalling libelf... [ 12s] [37/47] preinstalling smack... [ 12s] [38/47] preinstalling bzip2... [ 12s] [39/47] preinstalling libmagic... [ 12s] [40/47] preinstalling libmount... [ 12s] [41/47] preinstalling tar... [ 12s] [42/47] preinstalling util-linux... [ 13s] [43/47] preinstalling util-linux-su... [ 13s] [44/47] preinstalling nss... [ 13s] [45/47] preinstalling libsoftokn3... [ 13s] [46/47] preinstalling rpm... [ 13s] [47/47] preinstalling asan-force-options... [ 13s] running qemu-linux-user-x86_64-cross postinstall script [ 13s] running qemu-accel-x86_64-aarch64 postinstall script [ 14s] mv: cannot stat `/usr/lib64/gcc/aarch64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 14s] running setup postinstall script [ 14s] chroot: failed to run command '': No such file or directory [ 14s] running asan-build-env postinstall script [ 14s] running asan-force-options postinstall script [ 19s] initializing rpm db... [ 20s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 20s] breaking dependency libxcrypt-devel -> glibc-devel [ 20s] cycle: nss -> libsoftokn3 [ 20s] breaking dependency nss -> libsoftokn3 [ 20s] done [ 20s] querying package ids... [ 20s] [1/104] installing libmagic-data-5.45-1.5 [ 21s] [2/104] installing setup-0.9-1.28 [ 21s] [3/104] installing filesystem-3.1-1.1 [ 22s] [4/104] installing glibc-2.40-2.5 [ 23s] [5/104] installing diffutils-3.10-1.1 [ 23s] [6/104] installing libatomic-14.2.0-3.6 [ 24s] [7/104] installing libgcc-14.2.0-3.6 [ 24s] [8/104] installing libgomp-14.2.0-3.6 [ 25s] [9/104] installing libitm-14.2.0-3.6 [ 25s] [10/104] installing update-alternatives-1.22.2-1.1 [ 26s] [11/104] installing libgfortran-14.2.0-3.6 [ 26s] [12/104] installing libstdc++-14.2.0-3.6 [ 27s] [13/104] installing libstdc++-devel-14.2.0-3.6 [ 28s] [14/104] installing libasan-14.2.0-3.6 [ 28s] [15/104] installing libcc1-14.2.0-3.6 [ 29s] [16/104] installing libhwasan-14.2.0-3.6 [ 29s] [17/104] installing libubsan-14.2.0-3.6 [ 30s] [18/104] installing cpio-2.8-1.1 [ 30s] [19/104] installing findutils-4.3.8-1.6 [ 30s] [20/104] installing gdbm-1.8.3-1.6 [ 31s] [21/104] installing hostname-3.23-1.1 [ 31s] [22/104] installing libattr-2.5.1-1.6 [ 32s] [23/104] installing libbz2-1.0.8-1.6 [ 32s] [24/104] installing libcap-2.73-1.5 [ 32s] [25/104] installing libltdl-2.4.7-1.6 [ 33s] [26/104] installing liblua-5.1.5-1.5 [ 34s] [27/104] installing libpopt-1.16-1.5 [ 34s] [28/104] installing libsmack-1.3.1-1.5 [ 35s] [29/104] installing libsmartcols-2.39.3-2.5 [ 36s] [30/104] installing libuuid-2.39.3-2.5 [ 36s] [31/104] installing libxcrypt-4.4.36-1.6 [ 37s] [32/104] installing m4-1.4.19-1.1 [ 37s] [33/104] installing net-tools-2.0_20121208git-1.6 [ 37s] [34/104] installing nspr-4.35-1.5 [ 38s] [35/104] installing patch-2.7.6-1.5 [ 38s] [36/104] installing sed-4.1c-1.5 [ 38s] [37/104] installing which-2.17-1.1 [ 38s] [38/104] installing zlib-1.3.1-2.6 [ 39s] [39/104] installing bash-3.2.57-1.1 [ 39s] [40/104] installing libblkid-2.39.3-2.5 [ 40s] [41/104] installing libfreebl3-3.98-1.6 [ 40s] [42/104] installing liblzma-5.6.3-1.6 [ 41s] [43/104] installing libopenssl11-1.1.1w-1.6 [ 42s] [44/104] installing libpcre-8.45-1.6 [ 42s] [45/104] installing libsqlite-3.48.0-1.6 [ 43s] [46/104] installing libxml2-2.13.5-1.5 [ 44s] [47/104] installing libzstd1-1.5.6-1.6 [ 44s] [48/104] installing pkg-config-0.29.2-1.6 [ 44s] [49/104] installing build-compare-2023.06.18-1.1 [ 45s] [50/104] installing hal-rootstrap-checker-0.1.0-1.1 [ 45s] [51/104] installing qemu-linux-user-x86_64-cross-8.2.2.1-1.8 [ 54s] [52/104] installing util-macros-1.19.0-1.1 [ 54s] [53/104] installing asan-build-env-14.2.0-1.1 [ 54s] libasan.so is already preloaded [ 54s] [54/104] installing coreutils-6.9-14.27 [ 55s] [55/104] installing cpp-14.2.0-3.6 [ 56s] [56/104] installing gcc-c++-14.2.0-3.6 [ 56s] [57/104] installing gawk-3.1.5-1.1 [ 57s] [58/104] installing grep-2.5.2-1.5 [ 57s] [59/104] installing libacl-2.3.2-1.5 [ 57s] [60/104] installing libelf-0.189-1.6 [ 58s] [61/104] installing make-4.4.1-1.6 [ 58s] [62/104] installing nss-certs-3.98-1.6 [ 58s] [63/104] installing smack-1.3.1-1.5 [ 58s] [64/104] installing binutils-libs-2.43-1.6 [ 59s] [65/104] installing bzip2-1.0.8-1.6 [ 59s] [66/104] installing libmagic-5.45-1.5 [ 59s] [67/104] installing libmount-2.39.3-2.5 [ 59s] [68/104] installing perl-5.38.0-1.5 [ 60s] [69/104] installing xz-5.6.3-1.6 [ 61s] [70/104] installing libfdisk-2.39.3-2.5 [ 61s] [71/104] installing gcc-14.2.0-3.6 [ 62s] [72/104] installing build-mkbaselibs-20120927-1.1 [ 62s] [73/104] installing linux-glibc-devel-6.6-1.6 [ 62s] [74/104] installing qemu-accel-x86_64-aarch64-0.4-1.1 [ 72s] [75/104] installing tar-1.17-1.1 [ 72s] [76/104] installing terminfo-base-full-6.4-1.6 [ 73s] [77/104] installing autoconf-2.71-1.6 [ 73s] [78/104] installing file-5.45-1.5 [ 73s] [79/104] installing glibc-locale-2.40-2.5 [ 74s] [80/104] installing gzip-1.13-1.5 [ 74s] [81/104] installing binutils-2.43-1.6 [ 74s] [82/104] installing tzdata-2024b-1.1 [ 75s] [83/104] installing pam-1.1.6-1.5 [ 75s] [84/104] installing libdw-0.189-1.6 [ 75s] [85/104] installing libarchive-3.7.7-1.5 [ 76s] [86/104] installing automake-1.16.5-1.6 [ 76s] [87/104] installing libasm-0.189-1.6 [ 76s] [88/104] installing build-20120927-1.1 [ 77s] [89/104] installing libncurses6-6.4-1.6 [ 77s] [90/104] installing libncurses-6.4-1.6 [ 77s] [91/104] installing less-668-1.1 [ 77s] [92/104] installing libreadline-5.2-1.6 [ 78s] [93/104] installing libtool-2.4.7-1.6 [ 78s] [94/104] installing elfutils-0.189-1.6 [ 78s] [95/104] installing util-linux-2.39.3-2.5 [ 78s] [96/104] installing util-linux-su-2.39.3-2.5 [ 78s] [97/104] installing libxcrypt-devel-4.4.36-1.6 [ 78s] [98/104] installing nss-3.98-1.6 [ 78s] [99/104] installing glibc-devel-2.40-2.5 [ 79s] [100/104] installing libsoftokn3-3.98-1.6 [ 79s] [101/104] installing rpm-4.14.1.1-1.6 [ 80s] [102/104] installing zlib-devel-1.3.1-2.6 [ 80s] [103/104] installing asan-force-options-14.2.0-1.1 [ 87s] [104/104] installing rpm-build-4.14.1.1-1.6 [ 87s] now finalizing build dir... [ 89s] ----------------------------------------------------------------- [ 89s] I have the following modifications for libpciaccess.spec: [ 89s] 6c6 [ 89s] < Release: 0 [ 89s] --- [ 89s] > Release: 1.1 [ 89s] 84a85 [ 89s] > %changelog [ 90s] build target is aarch64-tizen-linux [ 90s] ----------------------------------------------------------------- [ 90s] ----- building libpciaccess.spec (user abuild) [ 90s] ----------------------------------------------------------------- [ 90s] ----------------------------------------------------------------- [ 91s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-X-ASAN/standard/7325d11798514e0e18cf29ffc56035ff-libpciaccess' /home/abuild/rpmbuild/SOURCES/libpciaccess.spec [ 91s] Building target platforms: aarch64-tizen-linux [ 91s] Building for target aarch64-tizen-linux [ 91s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.v7K4Y0 [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + rm -rf libpciaccess-0.13.2 [ 91s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/libpciaccess-0.13.2.tar.bz2 [ 91s] + /bin/tar -xof - [ 91s] + STATUS=0 [ 91s] + '[' 0 -ne 0 ']' [ 91s] + cd libpciaccess-0.13.2 [ 91s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 91s] + echo 'Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch):' [ 91s] Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch): [ 91s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 91s] patching file src/Makefile.am [ 91s] + echo 'Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch):' [ 91s] Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch): [ 91s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 91s] patching file src/common_bridge.c [ 91s] patching file src/linux_sysfs.c [ 91s] + echo 'Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch):' [ 91s] Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch): [ 91s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 91s] patching file src/linux_sysfs.c [ 91s] + cp /home/abuild/rpmbuild/SOURCES/libpciaccess.manifest . [ 91s] + exit 0 [ 91s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.U0UsGT [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd libpciaccess-0.13.2 [ 91s] + ref=/usr/lib/rpm [ 91s] + mints=0 [ 91s] + case $(uname -m) in [ 91s] ++ uname -m [ 91s] + mints=20120610 [ 91s] + for s in guess sub [ 91s] ++ find -maxdepth 8 -name config.guess [ 91s] + for s in guess sub [ 91s] ++ find -maxdepth 8 -name config.sub [ 91s] + LANG=C [ 91s] + export LANG [ 91s] + unset DISPLAY [ 91s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 91s] + export CFLAGS [ 91s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 91s] + export CXXFLAGS [ 91s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 91s] + export FFLAGS [ 91s] + LDFLAGS= [ 91s] + export LDFLAGS [ 91s] + NOCONFIGURE=1 [ 91s] + AR=gcc-ar [ 91s] + export AR [ 91s] + NM=/bin/nm [ 91s] + export NM [ 91s] + RANLIB=gcc-ranlib [ 91s] + export RANLIB [ 91s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 91s] + export CFLAGS [ 91s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 91s] + export CXXFLAGS [ 91s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 91s] + export FFLAGS [ 91s] + ./autogen.sh --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 93s] autoreconf: export WARNINGS= [ 93s] autoreconf: Entering directory '.' [ 93s] autoreconf: configure.ac: not using Gettext [ 94s] autoreconf: running: aclocal -I m4 [ 103s] autoreconf: configure.ac: tracing [ 108s] autoreconf: running: libtoolize --copy [ 111s] libtoolize: putting auxiliary files in '.'. [ 111s] libtoolize: copying file './ltmain.sh' [ 111s] libtoolize: putting macros in 'm4'. [ 111s] libtoolize: copying file 'm4/libtool.m4' [ 112s] libtoolize: copying file 'm4/ltoptions.m4' [ 112s] libtoolize: copying file 'm4/ltsugar.m4' [ 113s] libtoolize: copying file 'm4/ltversion.m4' [ 113s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 114s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, [ 114s] libtoolize: and rerunning libtoolize and aclocal. [ 114s] autoreconf: configure.ac: not using Intltool [ 114s] autoreconf: configure.ac: not using Gtkdoc [ 114s] autoreconf: running: aclocal -I m4 [ 123s] autoreconf: running: /usr/bin/autoconf [ 128s] configure.ac:36: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 128s] configure.ac:36: You should run autoupdate. [ 128s] m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... [ 128s] configure.ac:36: the top level [ 128s] configure.ac:42: warning: The macro `AC_PROG_CC_C99' is obsolete. [ 128s] configure.ac:42: You should run autoupdate. [ 128s] ./lib/autoconf/c.m4:1659: AC_PROG_CC_C99 is expanded from... [ 128s] aclocal.m4:1809: XORG_COMPILER_BRAND is expanded from... [ 128s] aclocal.m4:1928: XORG_COMPILER_FLAGS is expanded from... [ 128s] aclocal.m4:2100: XORG_DEFAULT_OPTIONS is expanded from... [ 128s] configure.ac:42: the top level [ 133s] autoreconf: running: /usr/bin/autoheader [ 139s] autoreconf: running: automake --add-missing --copy --no-force [ 146s] configure.ac:33: installing './compile' [ 147s] configure.ac:36: installing './config.guess' [ 147s] configure.ac:36: installing './config.sub' [ 147s] configure.ac:32: installing './install-sh' [ 147s] configure.ac:32: installing './missing' [ 149s] scanpci/Makefile.am: installing './depcomp' [ 150s] autoreconf: Leaving directory '.' [ 153s] checking for a BSD-compatible install... /bin/install -c [ 153s] checking whether build environment is sane... yes [ 153s] checking for a race-free mkdir -p... /bin/mkdir -p [ 153s] checking for gawk... gawk [ 153s] checking whether make sets $(MAKE)... yes [ 153s] checking whether make supports nested variables... yes [ 153s] checking whether make supports the include directive... yes (GNU style) [ 153s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 154s] checking whether the C compiler works... yes [ 154s] checking for C compiler default output file name... a.out [ 155s] checking for suffix of executables... [ 155s] checking whether we are cross compiling... no [ 155s] checking for suffix of object files... o [ 156s] checking whether the compiler supports GNU C... yes [ 156s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 156s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 157s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 157s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 157s] checking for stdio.h... yes [ 158s] checking for stdlib.h... yes [ 158s] checking for string.h... yes [ 158s] checking for inttypes.h... yes [ 158s] checking for stdint.h... yes [ 158s] checking for strings.h... yes [ 159s] checking for sys/stat.h... yes [ 159s] checking for sys/types.h... yes [ 159s] checking for unistd.h... yes [ 159s] checking for wchar.h... yes [ 159s] checking for minix/config.h... no [ 159s] checking whether it is safe to define __EXTENSIONS__... yes [ 160s] checking whether _XOPEN_SOURCE should be defined... no [ 160s] checking build system type... aarch64-tizen-linux-gnu [ 160s] checking host system type... aarch64-tizen-linux-gnu [ 160s] checking how to print strings... printf [ 160s] checking for a sed that does not truncate output... /bin/sed [ 160s] checking for grep that handles long lines and -e... /bin/grep [ 160s] checking for egrep... /bin/grep -E [ 160s] checking for fgrep... /bin/grep -F [ 160s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 160s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 160s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 160s] checking the name lister (/bin/nm) interface... BSD nm [ 160s] checking whether ln -s works... yes [ 160s] checking the maximum length of command line arguments... 1572864 [ 161s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 161s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 161s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 161s] checking for aarch64-tizen-linux-gnu-file... no [ 161s] checking for file... file [ 161s] checking for aarch64-tizen-linux-gnu-objdump... no [ 161s] checking for objdump... objdump [ 161s] checking how to recognize dependent libraries... pass_all [ 161s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 161s] checking for dlltool... no [ 161s] checking how to associate runtime and link libraries... printf %s\n [ 161s] checking for aarch64-tizen-linux-gnu-ar... gcc-ar [ 161s] checking for archiver @FILE support... @ [ 161s] checking for aarch64-tizen-linux-gnu-strip... no [ 161s] checking for strip... strip [ 161s] checking for aarch64-tizen-linux-gnu-ranlib... gcc-ranlib [ 162s] checking command to parse /bin/nm output from aarch64-tizen-linux-gnu-gcc object... ok [ 162s] checking for sysroot... no [ 162s] checking for a working dd... /bin/dd [ 162s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 162s] checking for aarch64-tizen-linux-gnu-mt... no [ 162s] checking for mt... no [ 162s] checking if : is a manifest tool... no [ 162s] checking for dlfcn.h... yes [ 162s] checking for objdir... .libs [ 163s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 163s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 163s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 164s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 164s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 164s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 164s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 164s] checking whether -lc should be explicitly linked in... no [ 165s] checking dynamic linker characteristics... GNU/Linux ld.so [ 165s] checking how to hardcode library paths into programs... immediate [ 165s] checking whether stripping libraries is possible... yes [ 165s] checking if libtool supports shared libraries... yes [ 165s] checking whether to build shared libraries... yes [ 165s] checking whether to build static libraries... yes [ 165s] checking for aarch64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed [ 166s] checking whether __clang__ is declared... no [ 166s] checking whether __INTEL_COMPILER is declared... no [ 166s] checking whether __SUNPRO_C is declared... no [ 166s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 166s] checking pkg-config is at least version 0.9.0... yes [ 167s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=unknown-warning-option... no [ 167s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=unused-command-line-argument... no [ 167s] checking if aarch64-tizen-linux-gnu-gcc supports -Wall... yes [ 168s] checking if aarch64-tizen-linux-gnu-gcc supports -Wpointer-arith... yes [ 169s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-declarations... yes [ 169s] checking if aarch64-tizen-linux-gnu-gcc supports -Wformat=2... yes [ 170s] checking if aarch64-tizen-linux-gnu-gcc supports -Wstrict-prototypes... yes [ 170s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-prototypes... yes [ 171s] checking if aarch64-tizen-linux-gnu-gcc supports -Wnested-externs... yes [ 171s] checking if aarch64-tizen-linux-gnu-gcc supports -Wbad-function-cast... yes [ 171s] checking if aarch64-tizen-linux-gnu-gcc supports -Wold-style-definition... yes [ 172s] checking if aarch64-tizen-linux-gnu-gcc supports -Wdeclaration-after-statement... yes [ 172s] checking if aarch64-tizen-linux-gnu-gcc supports -Wunused... yes [ 173s] checking if aarch64-tizen-linux-gnu-gcc supports -Wuninitialized... yes [ 173s] checking if aarch64-tizen-linux-gnu-gcc supports -Wshadow... yes [ 173s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-noreturn... yes [ 174s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-format-attribute... yes [ 174s] checking if aarch64-tizen-linux-gnu-gcc supports -Wredundant-decls... yes [ 174s] checking if aarch64-tizen-linux-gnu-gcc supports -Wlogical-op... yes [ 175s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=implicit... yes [ 175s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=nonnull... yes [ 176s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=init-self... yes [ 177s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=main... yes [ 177s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=missing-braces... yes [ 177s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=sequence-point... yes [ 178s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=return-type... yes [ 178s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=trigraphs... yes [ 179s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=array-bounds... yes [ 179s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=write-strings... yes [ 179s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=address... yes [ 180s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=int-to-pointer-cast... yes [ 180s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=pointer-to-int-cast... yes [ 181s] checking if aarch64-tizen-linux-gnu-gcc supports -pedantic... yes [ 181s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror... yes [ 181s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=attributes... yes [ 182s] checking whether make supports nested variables... (cached) yes [ 182s] checking for special C compiler options needed for large files... no [ 182s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 182s] checking for err.h... yes [ 183s] checking for asm/mtrr.h... no [ 183s] checking for struct pci_io.pi_sel.pc_domain... no [ 183s] checking that generated files are newer than configure... done [ 183s] configure: creating ./config.status [ 187s] config.status: creating Makefile [ 187s] config.status: creating include/Makefile [ 188s] config.status: creating man/Makefile [ 188s] config.status: creating src/Makefile [ 188s] config.status: creating scanpci/Makefile [ 188s] config.status: creating pciaccess.pc [ 188s] config.status: creating config.h [ 189s] config.status: executing depfiles commands [ 190s] config.status: executing libtool commands [ 191s] + export 'CFLAGS=-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -w' [ 191s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -w' [ 191s] + export 'CFLAGS=-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 191s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 191s] + AR=gcc-ar [ 191s] + export AR [ 191s] + NM=/bin/nm [ 191s] + export NM [ 191s] + RANLIB=gcc-ranlib [ 191s] + export RANLIB [ 191s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 191s] + export CFLAGS [ 191s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 191s] + export CXXFLAGS [ 191s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 191s] + export FFLAGS [ 191s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --with-pciids-path=/usr/share/misc --with-zlib [ 193s] checking for a BSD-compatible install... /bin/install -c [ 193s] checking whether build environment is sane... yes [ 193s] checking for a race-free mkdir -p... /bin/mkdir -p [ 193s] checking for gawk... gawk [ 193s] checking whether make sets $(MAKE)... yes [ 194s] checking whether make supports nested variables... yes [ 194s] checking whether make supports the include directive... yes (GNU style) [ 194s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 195s] checking whether the C compiler works... yes [ 195s] checking for C compiler default output file name... a.out [ 195s] checking for suffix of executables... [ 195s] checking whether we are cross compiling... no [ 196s] checking for suffix of object files... o [ 196s] checking whether the compiler supports GNU C... yes [ 196s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 196s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 196s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 197s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 197s] checking for stdio.h... yes [ 197s] checking for stdlib.h... yes [ 197s] checking for string.h... yes [ 198s] checking for inttypes.h... yes [ 198s] checking for stdint.h... yes [ 198s] checking for strings.h... yes [ 198s] checking for sys/stat.h... yes [ 198s] checking for sys/types.h... yes [ 198s] checking for unistd.h... yes [ 199s] checking for wchar.h... yes [ 199s] checking for minix/config.h... no [ 199s] checking whether it is safe to define __EXTENSIONS__... yes [ 199s] checking whether _XOPEN_SOURCE should be defined... no [ 199s] checking build system type... aarch64-tizen-linux-gnu [ 199s] checking host system type... aarch64-tizen-linux-gnu [ 199s] checking how to print strings... printf [ 199s] checking for a sed that does not truncate output... /bin/sed [ 199s] checking for grep that handles long lines and -e... /bin/grep [ 199s] checking for egrep... /bin/grep -E [ 199s] checking for fgrep... /bin/grep -F [ 199s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 199s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 199s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 199s] checking the name lister (/bin/nm) interface... BSD nm [ 199s] checking whether ln -s works... yes [ 200s] checking the maximum length of command line arguments... 1572864 [ 200s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 200s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 200s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 200s] checking for aarch64-tizen-linux-gnu-file... no [ 200s] checking for file... file [ 200s] checking for aarch64-tizen-linux-gnu-objdump... no [ 200s] checking for objdump... objdump [ 200s] checking how to recognize dependent libraries... pass_all [ 200s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 200s] checking for dlltool... no [ 200s] checking how to associate runtime and link libraries... printf %s\n [ 200s] checking for aarch64-tizen-linux-gnu-ar... gcc-ar [ 200s] checking for archiver @FILE support... @ [ 200s] checking for aarch64-tizen-linux-gnu-strip... no [ 200s] checking for strip... strip [ 200s] checking for aarch64-tizen-linux-gnu-ranlib... gcc-ranlib [ 201s] checking command to parse /bin/nm output from aarch64-tizen-linux-gnu-gcc object... ok [ 201s] checking for sysroot... no [ 201s] checking for a working dd... /bin/dd [ 201s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 201s] checking for aarch64-tizen-linux-gnu-mt... no [ 201s] checking for mt... no [ 201s] checking if : is a manifest tool... no [ 202s] checking for dlfcn.h... yes [ 202s] checking for objdir... .libs [ 202s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... yes [ 202s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 202s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 203s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 203s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 203s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 203s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 203s] checking whether -lc should be explicitly linked in... no [ 204s] checking dynamic linker characteristics... GNU/Linux ld.so [ 204s] checking how to hardcode library paths into programs... immediate [ 204s] checking whether stripping libraries is possible... yes [ 204s] checking if libtool supports shared libraries... yes [ 204s] checking whether to build shared libraries... yes [ 204s] checking whether to build static libraries... no [ 204s] checking for aarch64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed [ 205s] checking whether __clang__ is declared... no [ 205s] checking whether __INTEL_COMPILER is declared... no [ 205s] checking whether __SUNPRO_C is declared... no [ 205s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 206s] checking pkg-config is at least version 0.9.0... yes [ 206s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=unknown-warning-option... no [ 206s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=unused-command-line-argument... no [ 207s] checking if aarch64-tizen-linux-gnu-gcc supports -Wall... yes [ 207s] checking if aarch64-tizen-linux-gnu-gcc supports -Wpointer-arith... yes [ 207s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-declarations... yes [ 208s] checking if aarch64-tizen-linux-gnu-gcc supports -Wformat=2... yes [ 208s] checking if aarch64-tizen-linux-gnu-gcc supports -Wstrict-prototypes... yes [ 208s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-prototypes... yes [ 209s] checking if aarch64-tizen-linux-gnu-gcc supports -Wnested-externs... yes [ 209s] checking if aarch64-tizen-linux-gnu-gcc supports -Wbad-function-cast... yes [ 209s] checking if aarch64-tizen-linux-gnu-gcc supports -Wold-style-definition... yes [ 209s] checking if aarch64-tizen-linux-gnu-gcc supports -Wdeclaration-after-statement... yes [ 210s] checking if aarch64-tizen-linux-gnu-gcc supports -Wunused... yes [ 210s] checking if aarch64-tizen-linux-gnu-gcc supports -Wuninitialized... yes [ 210s] checking if aarch64-tizen-linux-gnu-gcc supports -Wshadow... yes [ 211s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-noreturn... yes [ 211s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-format-attribute... yes [ 211s] checking if aarch64-tizen-linux-gnu-gcc supports -Wredundant-decls... yes [ 212s] checking if aarch64-tizen-linux-gnu-gcc supports -Wlogical-op... yes [ 212s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=implicit... yes [ 212s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=nonnull... yes [ 213s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=init-self... yes [ 213s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=main... yes [ 214s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=missing-braces... yes [ 214s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=sequence-point... yes [ 214s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=return-type... yes [ 215s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=trigraphs... yes [ 215s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=array-bounds... yes [ 215s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=write-strings... yes [ 215s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=address... yes [ 216s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=int-to-pointer-cast... yes [ 216s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=pointer-to-int-cast... yes [ 216s] checking if aarch64-tizen-linux-gnu-gcc supports -pedantic... yes [ 216s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror... yes [ 217s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=attributes... yes [ 217s] checking whether make supports nested variables... (cached) yes [ 217s] checking for gzopen in -lz... yes [ 217s] checking for zlib.h... yes [ 217s] checking for special C compiler options needed for large files... no [ 218s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 218s] checking for err.h... yes [ 218s] checking for asm/mtrr.h... no [ 218s] checking for struct pci_io.pi_sel.pc_domain... no [ 218s] checking that generated files are newer than configure... done [ 218s] configure: creating ./config.status [ 221s] config.status: creating Makefile [ 221s] config.status: creating include/Makefile [ 222s] config.status: creating man/Makefile [ 222s] config.status: creating src/Makefile [ 222s] config.status: creating scanpci/Makefile [ 222s] config.status: creating pciaccess.pc [ 222s] config.status: creating config.h [ 223s] config.status: executing depfiles commands [ 223s] config.status: executing libtool commands [ 224s] + make -j12 [ 224s] make all-recursive [ 224s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 224s] Making all in include [ 224s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 224s] make[2]: Nothing to be done for 'all'. [ 224s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 224s] Making all in man [ 224s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 224s] GEN scanpci.1 [ 224s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 224s] Making all in src [ 224s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 224s] CC common_bridge.lo [ 224s] CC common_iterator.lo [ 224s] CC common_init.lo [ 224s] CC common_interface.lo [ 224s] CC common_io.lo [ 224s] CC common_capability.lo [ 224s] CC common_device_name.lo [ 224s] CC common_map.lo [ 224s] CC common_vgaarb.lo [ 224s] CC linux_sysfs.lo [ 224s] CC linux_devmem.lo [ 225s] CCLD libpciaccess.la [ 226s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 226s] Making all in scanpci [ 226s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 226s] CC scanpci.o [ 227s] CCLD scanpci [ 227s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 227s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 227s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 227s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 227s] + exit 0 [ 227s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.0cr16c [ 227s] + umask 022 [ 228s] + cd /home/abuild/rpmbuild/BUILD [ 228s] + cd libpciaccess-0.13.2 [ 228s] + LANG=C [ 228s] + export LANG [ 228s] + unset DISPLAY [ 228s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 228s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 228s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 228s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 install [ 228s] Making install in include [ 228s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 228s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 228s] make[2]: Nothing to be done for 'install-exec-am'. [ 228s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/include' [ 228s] /bin/install -c -m 644 pciaccess.h '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/include' [ 228s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 228s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 228s] Making install in man [ 228s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 228s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 228s] make[2]: Nothing to be done for 'install-exec-am'. [ 228s] make[2]: Nothing to be done for 'install-data-am'. [ 228s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 228s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 228s] Making install in src [ 228s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 228s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 228s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64' [ 228s] /bin/sh ../libtool --mode=install /bin/install -c libpciaccess.la '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64' [ 228s] libtool: install: /bin/install -c .libs/libpciaccess.so.0.13.2 /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.so.0.13.2 [ 228s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64 && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.13.2 libpciaccess.so.0; }; }) [ 228s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64 && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.13.2 libpciaccess.so; }; }) [ 228s] libtool: install: /bin/install -c .libs/libpciaccess.lai /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.la [ 228s] libtool: warning: remember to run 'libtool --finish /usr/lib64' [ 228s] make[2]: Nothing to be done for 'install-data-am'. [ 228s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 228s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 228s] Making install in scanpci [ 228s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 228s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 228s] make[2]: Nothing to be done for 'install-exec-am'. [ 228s] make[2]: Nothing to be done for 'install-data-am'. [ 228s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 228s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 228s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 229s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 229s] make[2]: Nothing to be done for 'install-exec-am'. [ 229s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/pkgconfig' [ 229s] /bin/install -c -m 644 pciaccess.pc '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/pkgconfig' [ 229s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 229s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 229s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/info/dir [ 229s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 -regex '.*\.la$' [ 229s] + xargs rm -f -- [ 229s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 -regex '.*\.a$' [ 229s] + xargs rm -f -- [ 229s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/info [ 229s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/doc/packages [ 229s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/doc/libpciaccess [ 229s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/doc/libpciaccess-0.13.2 [ 229s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/gtk-doc [ 229s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/doc [ 229s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/man [ 229s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 -regex '.*/man/man./.*.[0-9]' [ 229s] + xargs rm -f -- [ 229s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 -regex '.*/man/../man./.*.[0-9]' [ 229s] + xargs rm -f -- [ 229s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 -regex '.*/man/man./.*.[0-9]pm' [ 229s] + xargs rm -f -- [ 229s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.13.2-1.1 --unique-debug-src-base libpciaccess-0.13.2-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2 [ 230s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.so.0.13.2 [ 230s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.so.0.13.2: Unknown debugging section .debug_line_str [ 230s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.so.0.13.2: Unknown debugging section .debug_loclists [ 230s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.so.0.13.2: Unknown debugging section .debug_rnglists [ 230s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.so.0.13.2: DWARF version 5 unhandled [ 230s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debuginfo.manifest [ 230s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debugsource.manifest [ 230s] + /usr/lib/rpm/check-buildroot [ 231s] + /usr/lib/rpm//brp-compress [ 231s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 231s] + /usr/lib/rpm/brp-python-hardlink [ 231s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 231s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/isu.list [ 231s] ~/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 231s] ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 231s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 232s] Processing files: libpciaccess-0.13.2-1.1.aarch64 [ 232s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 232s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 232s] [ 232s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.2mDiZq [ 232s] + umask 022 [ 232s] + cd /home/abuild/rpmbuild/BUILD [ 232s] + cd libpciaccess-0.13.2 [ 232s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/licenses/libpciaccess [ 232s] + export LC_ALL=C [ 232s] + LC_ALL=C [ 232s] + export LICENSEDIR [ 232s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/licenses/libpciaccess [ 232s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/licenses/libpciaccess [ 232s] + exit 0 [ 232s] Provides: libpciaccess = 0.13.2-1.1 libpciaccess(aarch-64) = 0.13.2-1.1 libpciaccess.so.0()(64bit) [ 232s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 232s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 232s] Requires(post): /sbin/ldconfig [ 232s] Requires(postun): /sbin/ldconfig [ 232s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libasan.so.8()(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.38)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libgcc_s.so.1(GCC_3.3.1)(64bit) libz.so.1()(64bit) libz.so.1(ZLIB_1.2.3.3)(64bit) [ 232s] Processing files: libpciaccess-debugsource-0.13.2-1.1.aarch64 [ 232s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/debugsourcefiles.list [ 232s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 232s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 232s] [ 232s] Processing files: libpciaccess-devel-0.13.2-1.1.aarch64 [ 232s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 232s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 232s] [ 232s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.rf7jc8 [ 232s] + umask 022 [ 232s] + cd /home/abuild/rpmbuild/BUILD [ 232s] + cd libpciaccess-0.13.2 [ 232s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/licenses/libpciaccess-devel [ 232s] + export LC_ALL=C [ 232s] + LC_ALL=C [ 232s] + export LICENSEDIR [ 232s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/licenses/libpciaccess-devel [ 232s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/licenses/libpciaccess-devel [ 232s] + exit 0 [ 233s] Provides: libpciaccess-devel = 0.13.2-1.1 libpciaccess-devel(aarch-64) = 0.13.2-1.1 pkgconfig(pciaccess) = 0.13.2 [ 233s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 233s] Requires: /usr/bin/pkg-config libpciaccess.so.0()(64bit) [ 233s] Processing files: libpciaccess-debuginfo-0.13.2-1.1.aarch64 [ 233s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 233s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 233s] [ 233s] Provides: libpciaccess-debuginfo = 0.13.2-1.1 libpciaccess-debuginfo(aarch-64) = 0.13.2-1.1 [ 233s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 233s] Recommends: libpciaccess-debugsource(aarch-64) = 0.13.2-1.1 [ 233s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 234s] Wrote: /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-1.1.src.rpm [ 234s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-0.13.2-1.1.aarch64.rpm [ 234s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-debugsource-0.13.2-1.1.aarch64.rpm [ 234s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-devel-0.13.2-1.1.aarch64.rpm [ 234s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-debuginfo-0.13.2-1.1.aarch64.rpm [ 234s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.IP0fJ2 [ 234s] + umask 022 [ 234s] + cd /home/abuild/rpmbuild/BUILD [ 234s] + cd libpciaccess-0.13.2 [ 234s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 234s] + exit 0 [ 234s] ... checking for files with abuild user/group [ 234s] ... creating baselibs [ 236s] no targets for arch aarch64, nothing to do [ 236s] [ 236s] b3cd3554859e finished "build libpciaccess.spec" at Fri May 16 09:32:18 UTC 2025. [ 236s] Retried build at Fri May 16 10:54:17 2025 returned same result, skipped