[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15 [ 0s] Using BUILD_ARCH=riscv64 [ 0s] [ 0s] [ 1s] 105e56e8a9c3 started "build python3-nose.spec" at Fri Dec 27 12:53:12 UTC 2024. [ 1s] [ 1s] Building python3-nose for project 'Tizen-Base-X-ASAN' repository 'standard' arch 'riscv64' srcmd5 '21fabebcca7f55a09c8b45ef1a2586c3' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15/.build-srcdir/python3-nose.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15/.build-srcdir/python3-nose.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/15/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.15/.build-srcdir/python3-nose.spec build ... [ 6s] registering binfmt handlers for cross build [ 7s] cycle: nss -> libsoftokn3 [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] [1/42] preinstalling libmagic-data... [ 7s] [2/42] preinstalling libncurses... [ 7s] [3/42] preinstalling setup... [ 7s] [4/42] preinstalling filesystem... [ 7s] [5/42] preinstalling glibc... [ 7s] [6/42] preinstalling bash... [ 7s] [7/42] preinstalling diffutils... [ 7s] [8/42] preinstalling grep... [ 7s] [9/42] preinstalling libattr... [ 7s] [10/42] preinstalling libblkid... [ 7s] [11/42] preinstalling libbz2... [ 7s] [12/42] preinstalling libfreebl3... [ 7s] [13/42] preinstalling libgcc... [ 7s] [14/42] preinstalling liblua... [ 8s] [15/42] preinstalling liblzma... [ 8s] [16/42] preinstalling libpopt... [ 8s] [17/42] preinstalling libreadline... [ 8s] [18/42] preinstalling libsmack... [ 8s] [19/42] preinstalling libsqlite... [ 8s] [20/42] preinstalling libuuid... [ 8s] [21/42] preinstalling libxcrypt... [ 8s] [22/42] preinstalling libzstd1... [ 8s] [23/42] preinstalling nspr... [ 8s] [24/42] preinstalling sed... [ 8s] [25/42] preinstalling zlib... [ 8s] [26/42] preinstalling qemu-accel-x86_64-riscv64... [ 10s] [27/42] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [28/42] preinstalling coreutils... [ 10s] [29/42] preinstalling libacl... [ 10s] [30/42] preinstalling libcap... [ 10s] [31/42] preinstalling libelf... [ 10s] [32/42] preinstalling libmount... [ 10s] [33/42] preinstalling smack... [ 10s] [34/42] preinstalling bzip2... [ 10s] [35/42] preinstalling libmagic... [ 10s] [36/42] preinstalling libxml2... [ 10s] [37/42] preinstalling tar... [ 11s] [38/42] preinstalling util-linux... [ 11s] [39/42] preinstalling util-linux-su... [ 11s] [40/42] preinstalling nss... [ 11s] [41/42] preinstalling libsoftokn3... [ 11s] [42/42] preinstalling rpm... [ 11s] running qemu-linux-user-x86_64-cross postinstall script [ 12s] running qemu-accel-x86_64-riscv64 postinstall script [ 12s] mv: cannot stat `/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 12s] running setup postinstall script [ 12s] chroot: failed to run command '': No such file or directory [ 12s] initializing rpm db... [ 12s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 12s] breaking dependency libxcrypt-devel -> glibc-devel [ 12s] cycle: libsoftokn3 -> nss [ 12s] breaking dependency nss -> libsoftokn3 [ 12s] done [ 12s] querying package ids... [ 13s] [1/105] installing libmagic-data-5.45-1.7 [ 13s] [2/105] installing setup-0.9-1.1 [ 13s] [3/105] installing filesystem-3.1-1.1 [ 14s] [4/105] installing glibc-2.40-1.7 [ 14s] [5/105] installing bash-3.2.57-1.1 [ 14s] [6/105] installing cpio-2.8-1.1 [ 14s] [7/105] installing diffutils-3.10-1.1 [ 15s] [8/105] installing findutils-4.3.8-1.7 [ 15s] [9/105] installing gdbm-1.8.3-1.7 [ 15s] [10/105] installing hostname-3.23-1.1 [ 15s] [11/105] installing libatomic-14.2.0-1.7 [ 16s] [12/105] installing libattr-2.5.1-1.7 [ 16s] [13/105] installing libblkid-2.39.3-1.5 [ 17s] [14/105] installing libbz2-1.0.8-1.7 [ 17s] [15/105] installing libexpat-2.6.2-1.7 [ 18s] [16/105] installing libffi-3.4.2-1.7 [ 18s] [17/105] installing libfreebl3-3.98-1.6 [ 18s] [18/105] installing libgcc-14.2.0-1.7 [ 19s] [19/105] installing libgomp-14.2.0-1.7 [ 20s] [20/105] installing libitm-14.2.0-1.7 [ 20s] [21/105] installing libltdl-2.4.7-1.7 [ 20s] [22/105] installing liblua-5.1.5-1.6 [ 21s] [23/105] installing liblzma-5.4.5-1.7 [ 21s] [24/105] installing libopenssl3-3.0.13-1.7 [ 21s] [25/105] installing libpcre-8.45-1.6 [ 21s] [26/105] installing libpopt-1.16-1.6 [ 21s] [27/105] installing libpython3_121_0-3.12.0-1.6 [ 22s] [28/105] installing libsmack-1.3.1-1.6 [ 22s] [29/105] installing libsmartcols-2.39.3-1.5 [ 23s] [30/105] installing libsqlite-3.48.0-1.7 [ 23s] [31/105] installing libuuid-2.39.3-1.5 [ 24s] [32/105] installing libxcrypt-4.4.36-1.7 [ 24s] [33/105] installing libzstd1-1.5.6-1.2 [ 25s] [34/105] installing m4-1.4.19-1.1 [ 25s] [35/105] installing net-tools-2.0_20121208git-1.6 [ 25s] [36/105] installing nspr-4.35-1.6 [ 26s] [37/105] installing patch-2.7.6-1.6 [ 26s] [38/105] installing pkg-config-0.29.2-1.6 [ 26s] [39/105] installing sed-4.1c-1.7 [ 26s] [40/105] installing update-alternatives-1.22.2-1.1 [ 27s] [41/105] installing which-2.17-1.1 [ 27s] [42/105] installing zlib-1.3-1.7 [ 27s] [43/105] installing build-compare-2023.06.18-1.1 [ 28s] [44/105] installing hal-rootstrap-checker-0.1.0-1.1 [ 28s] [45/105] installing qemu-linux-user-x86_64-cross-9.2.0-1.1 [ 30s] [46/105] installing binutils-libs-2.43-1.7 [ 30s] [47/105] installing coreutils-6.9-14.1 [ 31s] [48/105] installing cpp-14.2.0-1.7 [ 32s] [49/105] installing gawk-3.1.5-1.1 [ 32s] [50/105] installing gcc-c++-14.2.0-1.7 [ 33s] [51/105] installing grep-2.5.2-1.7 [ 33s] [52/105] installing libacl-2.3.2-1.7 [ 33s] [53/105] installing libcap-2.69-1.7 [ 34s] [54/105] installing libelf-0.189-1.7 [ 34s] [55/105] installing libgfortran-14.2.0-1.7 [ 34s] [56/105] installing libmount-2.39.3-1.5 [ 35s] [57/105] installing libstdc++-14.2.0-1.7 [ 35s] [58/105] installing make-4.4-1.7 [ 35s] [59/105] installing nss-certs-3.98-1.6 [ 36s] [60/105] installing smack-1.3.1-1.6 [ 36s] [61/105] installing bzip2-1.0.8-1.7 [ 36s] [62/105] installing libfdisk-2.39.3-1.5 [ 36s] [63/105] installing libmagic-5.45-1.7 [ 37s] [64/105] installing libxml2-2.12.5-1.6 [ 37s] [65/105] installing xz-5.4.5-1.7 [ 37s] [66/105] installing perl-5.38.0-1.7 [ 40s] [67/105] installing build-mkbaselibs-20120927-1.1 [ 40s] [68/105] installing libstdc++-devel-14.2.0-1.7 [ 41s] [69/105] installing linux-glibc-devel-6.6-1.7 [ 41s] [70/105] installing binutils-2.43-1.7 [ 42s] [71/105] installing file-5.45-1.7 [ 42s] [72/105] installing tar-1.17-1.1 [ 42s] [73/105] installing terminfo-base-full-6.4-1.7 [ 43s] [74/105] installing autoconf-2.71-1.7 [ 43s] [75/105] installing glibc-locale-2.40-1.7 [ 44s] [76/105] installing gzip-1.13-1.7 [ 44s] [77/105] installing libcc1-14.2.0-1.7 [ 45s] [78/105] installing libubsan-14.2.0-1.7 [ 45s] [79/105] installing pam-1.1.6-1.6 [ 46s] [80/105] installing tzdata-2023c-1.1 [ 47s] [81/105] installing libdw-0.189-1.7 [ 47s] [82/105] installing libarchive-3.7.2-1.6 [ 47s] [83/105] installing automake-1.16.5-1.7 [ 48s] [84/105] installing libasm-0.189-1.7 [ 48s] [85/105] installing libncurses6-6.4-1.7 [ 49s] [86/105] installing build-20120927-1.1 [ 49s] [87/105] installing gcc-14.2.0-1.7 [ 51s] [88/105] installing libncurses-6.4-1.7 [ 51s] [89/105] installing less-668-1.1 [ 51s] [90/105] installing libreadline-5.2-1.7 [ 52s] [91/105] installing qemu-accel-x86_64-riscv64-0.4-1.1 [ 74s] [92/105] installing libtool-2.4.7-1.7 [ 74s] [93/105] installing elfutils-0.189-1.7 [ 74s] [94/105] installing python3-base-3.12.0-1.6 [ 75s] [95/105] installing util-linux-2.39.3-1.5 [ 76s] [96/105] installing python3-3.12.0-1.1 [ 76s] [97/105] installing util-linux-su-2.39.3-1.5 [ 76s] [98/105] installing python3-devel-3.12.0-1.6 [ 76s] [99/105] installing python3-setuptools-69.0.2-1.1 [ 77s] [100/105] installing libxcrypt-devel-4.4.36-1.7 [ 77s] [101/105] installing nss-3.98-1.6 [ 78s] [102/105] installing glibc-devel-2.40-1.7 [ 78s] [103/105] installing libsoftokn3-3.98-1.6 [ 79s] [104/105] installing rpm-4.14.1.1-1.6 [ 80s] [105/105] installing rpm-build-4.14.1.1-1.6 [ 80s] now finalizing build dir... [ 81s] ----------------------------------------------------------------- [ 81s] I have the following modifications for python3-nose.spec: [ 81s] 4c4 [ 81s] < Release: 0 [ 81s] --- [ 81s] > Release: 1.1 [ 81s] build target is riscv64-tizen-linux [ 81s] ----------------------------------------------------------------- [ 81s] ----- building python3-nose.spec (user abuild) [ 81s] ----------------------------------------------------------------- [ 81s] ----------------------------------------------------------------- [ 81s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=riscv64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-X-ASAN/standard/21fabebcca7f55a09c8b45ef1a2586c3-python3-nose' /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 81s] Building target platforms: riscv64-tizen-linux [ 81s] Building for target riscv64-tizen-linux [ 81s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.cgeqRO [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + rm -rf nose-1.2.1 [ 81s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/nose-1.2.1.tar.gz [ 81s] + /bin/tar -xof - [ 81s] + STATUS=0 [ 81s] + '[' 0 -ne 0 ']' [ 81s] + cd nose-1.2.1 [ 81s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 81s] + cp /home/abuild/rpmbuild/SOURCES/python3-nose.manifest . [ 81s] + sed -i s,man/man1,share/man/man1, setup.py [ 81s] + exit 0 [ 81s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.xRfefb [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + cd nose-1.2.1 [ 81s] + ref=/usr/lib/rpm [ 81s] + mints=0 [ 81s] + case $(uname -m) in [ 81s] ++ uname -m [ 81s] + mints=20160911 [ 81s] + for s in guess sub [ 81s] ++ find -maxdepth 8 -name config.guess [ 81s] + for s in guess sub [ 81s] ++ find -maxdepth 8 -name config.sub [ 81s] + LANG=C [ 81s] + export LANG [ 81s] + unset DISPLAY [ 81s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 81s] + export CFLAGS [ 81s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 81s] + export CXXFLAGS [ 81s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 81s] + export FFLAGS [ 81s] + LDFLAGS= [ 81s] + export LDFLAGS [ 81s] + /usr/bin/python3 setup.py build [ 82s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:53: SyntaxWarning: invalid escape sequence '\(' [ 82s] "sys.exit\(\n" [ 82s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:54: SyntaxWarning: invalid escape sequence '\(' [ 82s] " load_entry_point\(([^\)]+)\)\(\)\n" [ 82s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:55: SyntaxWarning: invalid escape sequence '\)' [ 82s] "\)\n") [ 83s] + exit 0 [ 83s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.7MVIhs [ 83s] + umask 022 [ 83s] + cd /home/abuild/rpmbuild/BUILD [ 83s] + cd nose-1.2.1 [ 83s] + LANG=C [ 83s] + export LANG [ 83s] + unset DISPLAY [ 83s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 [ 83s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 [ 83s] + /usr/bin/python3 setup.py install --prefix=/usr --root=/home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 [ 83s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:53: SyntaxWarning: invalid escape sequence '\(' [ 83s] "sys.exit\(\n" [ 83s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:54: SyntaxWarning: invalid escape sequence '\(' [ 83s] " load_entry_point\(([^\)]+)\)\(\)\n" [ 83s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:55: SyntaxWarning: invalid escape sequence '\)' [ 83s] "\)\n") [ 85s] /usr/lib/python3.12/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. [ 85s] !! [ 85s] [ 85s] ******************************************************************************** [ 85s] Please avoid running ``setup.py`` directly. [ 85s] Instead, use pypa/build, pypa/installer or other [ 85s] standards-based tools. [ 85s] [ 85s] See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. [ 85s] ******************************************************************************** [ 85s] [ 85s] !! [ 85s] self.initialize_options() [ 85s] File "/usr/lib/python3.12/site-packages/nose/ext/dtcompat.py", line 344 [ 85s] raise TypeError, 'Expected a module: %r' % module [ 85s] ^ [ 85s] SyntaxError: invalid syntax [ 85s] [ 85s] File "/usr/lib/python3.12/site-packages/nose/failure.py", line 37 [ 85s] raise self.exc_class, self.exc_val, self.tb [ 85s] ^ [ 85s] SyntaxError: invalid syntax [ 85s] [ 85s] File "/usr/lib/python3.12/site-packages/nose/twistedtools.py", line 169 [ 85s] raise exc_type, exc_value, tb [ 85s] ^ [ 85s] SyntaxError: invalid syntax [ 85s] [ 85s] File "/usr/lib/python3.12/site-packages/nose/inspector.py", line 41 [ 85s] except tokenize.TokenError, e: [ 85s] ^^^^^^^^^^^^^^^^^^^^^^ [ 85s] SyntaxError: multiple exception types must be parenthesized [ 85s] [ 85s] File "/usr/lib/python3.12/site-packages/nose/core.py", line 143 [ 85s] print "%s version %s" % (os.path.basename(sys.argv[0]), __version__) [ 85s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 85s] SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)? [ 85s] [ 85s] File "/usr/lib/python3.12/site-packages/nose/plugins/plugintest.py", line 407 [ 85s] print munge_nose_output_for_doctest(out) [ 85s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 85s] SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)? [ 85s] [ 85s] File "/usr/lib/python3.12/site-packages/nose/plugins/doctests.py", line 277 [ 85s] except ImportError, e: [ 85s] ^^^^^^^^^^^^^^ [ 85s] SyntaxError: multiple exception types must be parenthesized [ 85s] [ 86s] File "/usr/lib/python3.12/site-packages/nose/plugins/multiprocess.py", line 466 [ 86s] except (KeyboardInterrupt, SystemExit), e: [ 86s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 86s] SyntaxError: multiple exception types must be parenthesized [ 86s] [ 86s] File "/usr/lib/python3.12/site-packages/nose/plugins/manager.py", line 390 [ 86s] except Exception, e: [ 86s] ^^^^^^^^^^^^ [ 86s] SyntaxError: multiple exception types must be parenthesized [ 86s] [ 86s] File "/usr/lib/python3.12/site-packages/nose/plugins/base.py", line 70 [ 86s] except OptionConflictError, e: [ 86s] ^^^^^^^^^^^^^^^^^^^^^^ [ 86s] SyntaxError: multiple exception types must be parenthesized [ 86s] [ 86s] File "/usr/lib/python3.12/site-packages/nose/config.py", line 66 [ 86s] except ConfigParser.Error, exc: [ 86s] ^^^^^^^^^^^^^^^^^^^^^^^ [ 86s] SyntaxError: multiple exception types must be parenthesized [ 86s] [ 86s] no previously-included directories found matching 'doc/.build' [ 87s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.2.1-1.1 --unique-debug-src-base python3-nose-1.2.1-1.1.riscv64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/nose-1.2.1 [ 87s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/nose-1.2.1/python3-nose-debuginfo.manifest [ 87s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/nose-1.2.1/python3-nose-debugsource.manifest [ 87s] + /usr/lib/rpm/check-buildroot [ 87s] + /usr/lib/rpm//brp-compress [ 87s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 87s] + /usr/lib/rpm/brp-python-hardlink [ 89s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 [ 89s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/nose-1.2.1/isu.list [ 89s] ~/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 ~/rpmbuild/BUILD/nose-1.2.1 [ 89s] ~/rpmbuild/BUILD/nose-1.2.1 [ 89s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 90s] error: Unable to open /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 90s] /home/abuild/rpmbuild/SOURCES/python-nose.spec: No such file or directory [ 90s] error: query of specfile /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 90s] /home/abuild/rpmbuild/SOURCES/python-nose.spec failed, can't parse [ 90s] error: Unable to open /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 90s] /home/abuild/rpmbuild/SOURCES/python-nose.spec: No such file or directory [ 90s] error: query of specfile /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 90s] /home/abuild/rpmbuild/SOURCES/python-nose.spec failed, can't parse [ 90s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.UCUvSB [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd nose-1.2.1 [ 90s] + exit 0 [ 90s] Processing files: python3-nose-1.2.1-1.1.noarch [ 90s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 90s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 90s] [ 90s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.oYNMSy [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd nose-1.2.1 [ 90s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64/usr/share/doc/packages/python3-nose [ 90s] + export LC_ALL=C [ 90s] + LC_ALL=C [ 90s] + export DOCDIR [ 90s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64/usr/share/doc/packages/python3-nose [ 90s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64/usr/share/doc/packages/python3-nose [ 90s] + cp -pr README.txt /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64/usr/share/doc/packages/python3-nose [ 90s] + cp -pr lgpl.txt /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64/usr/share/doc/packages/python3-nose [ 90s] + exit 0 [ 91s] Provides: python3-nose = 1.2.1-1.1 [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Requires: /usr/bin/python3 [ 91s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 [ 91s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-nose-1.2.1-1.1.src.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-nose-1.2.1-1.1.noarch.rpm [ 91s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.kZulq1 [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd nose-1.2.1 [ 91s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 [ 91s] + exit 0 [ 91s] ... checking for files with abuild user/group [ 91s] ... creating baselibs [ 92s] [ 92s] 105e56e8a9c3 finished "build python3-nose.spec" at Fri Dec 27 12:54:44 UTC 2024. [ 92s] Retried build at Mon Dec 30 02:46:52 2024 returned same result, skipped Retried build at Mon Dec 30 15:50:24 2024 returned same result, skipped Retried build at Tue Jan 7 16:00:55 2025 returned same result, skipped Retried build at Thu Jan 9 04:27:29 2025 returned same result, skipped Retried build at Mon Jan 20 14:43:54 2025 returned same result, skipped Retried build at Sun Jan 26 23:09:49 2025 returned same result, skipped Retried build at Fri Jan 31 12:24:49 2025 returned same result, skipped