[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/data/workspace/gbsbuild-ROOT/GBS-ROOT/local/BUILD-ROOTS/scratch.riscv64.19 [ 0s] Using BUILD_ARCH=riscv64:noarch [ 0s] [ 0s] [ 0s] ip-192-168-56-50 started "build ise-engine-default.spec" at Mon Feb 10 09:18:06 UTC 2025. [ 0s] [ 0s] [ 0s] processing recipe /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/sources/tizen_unified_x_asan_standard/ise-engine-default-1.0.11-1/ise-engine-default.spec ... [ 0s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/cache --define jobs 8 --define _smp_mflags -j8 --repository /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/repos/tizen_unified_x_asan_standard/riscv64/RPMS --repository http://download.tizen.org/snapshots/TIZEN/Tizen/Tizen-Base-X-ASAN/reference/repos/standard/packages/ --repository http://download.tizen.org/snapshots/TIZEN/Tizen/Tizen-Base-X-ASAN/reference/repos/standard/debug/ --clean --nocumulate /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/sources/tizen_unified_x_asan_standard/ise-engine-default-1.0.11-1/ise-engine-default.spec build ... [ 6s] initializing /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/BUILD-ROOTS/scratch.riscv64.19/.srcfiles.cache ... [ 6s] /usr/lib/build/createdirdeps --oldfile /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/BUILD-ROOTS/scratch.riscv64.19/.srcfiles.cache /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/repos/tizen_unified_x_asan_standard/riscv64/RPMS [ 7s] /usr/lib/build/createrepomddeps --cachedir=/data/workspace/gbsbuild-ROOT/GBS-ROOT/local/cache http://download.tizen.org/snapshots/TIZEN/Tizen/Tizen-Base-X-ASAN/reference/repos/standard/packages/ [ 8s] /usr/lib/build/createrepomddeps --cachedir=/data/workspace/gbsbuild-ROOT/GBS-ROOT/local/cache http://download.tizen.org/snapshots/TIZEN/Tizen/Tizen-Base-X-ASAN/reference/repos/standard/debug/ [ 8s] expanding package dependencies... [ 9s] copying qemu [ 9s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 9s] [ 9s] registering binfmt handlers for cross build [ 9s] calculating packages to download... [ 11s] cycle: nss -> libsoftokn3 [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] [1/47] preinstalling libmagic-data... [ 12s] [2/47] preinstalling libncurses... [ 12s] [3/47] preinstalling setup... [ 12s] [4/47] preinstalling filesystem... [ 12s] [5/47] preinstalling glibc... [ 12s] [6/47] preinstalling libgcc... [ 12s] [7/47] preinstalling libstdc++... [ 12s] [8/47] preinstalling libasan... [ 12s] [9/47] preinstalling findutils... [ 12s] [10/47] preinstalling grep... [ 12s] [11/47] preinstalling libattr... [ 12s] [12/47] preinstalling libbz2... [ 12s] [13/47] preinstalling libcap... [ 12s] [14/47] preinstalling liblua... [ 12s] [15/47] preinstalling libpopt... [ 12s] [16/47] preinstalling libsmack... [ 12s] [17/47] preinstalling libuuid... [ 13s] [18/47] preinstalling libxcrypt... [ 13s] [19/47] preinstalling nspr... [ 13s] [20/47] preinstalling sed... [ 13s] [21/47] preinstalling zlib... [ 13s] [22/47] preinstalling bash... [ 13s] [23/47] preinstalling diffutils... [ 13s] [24/47] preinstalling libblkid... [ 13s] [25/47] preinstalling libfreebl3... [ 13s] [26/47] preinstalling liblzma... [ 13s] [27/47] preinstalling libreadline... [ 13s] [28/47] preinstalling libsqlite... [ 13s] [29/47] preinstalling libxml2... [ 13s] [30/47] preinstalling libzstd1... [ 13s] [31/47] preinstalling qemu-accel-x86_64-riscv64... [ 21s] [32/47] preinstalling qemu-linux-user-x86_64-cross... [ 21s] [33/47] preinstalling asan-build-env... [ 21s] [34/47] preinstalling libacl... [ 21s] [35/47] preinstalling libelf... [ 21s] [36/47] preinstalling smack... [ 21s] [37/47] preinstalling bzip2... [ 21s] [38/47] preinstalling coreutils... [ 22s] [39/47] preinstalling libmagic... [ 22s] [40/47] preinstalling libmount... [ 22s] [41/47] preinstalling tar... [ 22s] [42/47] preinstalling util-linux... [ 22s] [43/47] preinstalling util-linux-su... [ 22s] [44/47] preinstalling nss... [ 22s] [45/47] preinstalling libsoftokn3... [ 22s] [46/47] preinstalling rpm... [ 22s] [47/47] preinstalling asan-force-options... [ 23s] [ 23s] running qemu-linux-user-x86_64-cross postinstall script [ 23s] running qemu-accel-x86_64-riscv64 postinstall script [ 23s] mv: cannot stat `/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 23s] running setup postinstall script [ 23s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 23s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 23s] running asan-build-env postinstall script [ 23s] running asan-force-options postinstall script [ 26s] initializing rpm db... [ 27s] reordering...cycle: bash -> glibc -> filesystem -> setup -> asan-runtime-env [ 27s] breaking dependency bash -> glibc [ 27s] cycle: bash -> libasan -> glibc -> filesystem -> setup -> asan-runtime-env [ 27s] breaking dependency libasan -> glibc [ 27s] cycle: bash -> libasan -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env [ 27s] breaking dependency asan-runtime-env -> bash [ 27s] cycle: bash -> libasan -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 27s] breaking dependency coreutils -> bash [ 27s] cycle: glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 27s] breaking dependency coreutils -> glibc [ 27s] cycle: libasan -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 27s] breaking dependency libasan -> libgcc [ 27s] cycle: libasan -> libstdc++ -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 27s] breaking dependency libstdc++ -> glibc [ 27s] cycle: libasan -> libstdc++ -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 27s] breaking dependency coreutils -> libasan [ 27s] cycle: libgcc -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 27s] breaking dependency asan-runtime-env -> coreutils [ 27s] cycle: libasan -> libstdc++ -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env [ 27s] breaking dependency setup -> asan-runtime-env [ 27s] cycle: gio-branding-upstream -> libgio [ 27s] breaking dependency libgio -> gio-branding-upstream [ 27s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 27s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 27s] cycle: ecore-core -> efl [ 27s] breaking dependency ecore-core -> efl [ 27s] cycle: ecore-core -> eina -> efl [ 27s] breaking dependency efl -> ecore-core [ 27s] cycle: efl -> ecore-con [ 27s] breaking dependency ecore-con -> efl [ 27s] cycle: ecore-core -> eina -> efl -> ecore-con [ 27s] breaking dependency ecore-core -> eina [ 27s] cycle: ecore-core -> eo -> efl -> ecore-con [ 27s] breaking dependency ecore-con -> ecore-core [ 27s] cycle: efl -> ecore-con -> eet [ 27s] breaking dependency efl -> ecore-con [ 27s] cycle: efl -> eina [ 27s] breaking dependency efl -> eina [ 27s] cycle: eo -> efl [ 27s] breaking dependency efl -> eo [ 27s] cycle: ecore-evas -> ecore-input-evas -> evas [ 27s] breaking dependency evas -> ecore-evas [ 27s] cycle: libsecurity-manager-client -> security-manager [ 27s] breaking dependency security-manager -> libsecurity-manager-client [ 27s] cycle: libsecurity-manager-client -> security-manager -> security-license-manager [ 27s] breaking dependency security-manager -> security-license-manager [ 27s] cycle: security-manager -> security-manager-policy [ 27s] breaking dependency security-manager -> security-manager-policy [ 27s] cycle: isf -> org.tizen.isf-kbd-mode-changer [ 27s] breaking dependency isf -> org.tizen.isf-kbd-mode-changer [ 27s] cycle: glibc-devel -> libxcrypt-devel [ 27s] breaking dependency libxcrypt-devel -> glibc-devel [ 27s] cycle: nss -> libsoftokn3 [ 27s] breaking dependency nss -> libsoftokn3 [ 27s] reordering done [ 28s] [1/254] installing boost-license-1.83.0-1.4 [ 28s] [2/254] installing default-ac-domains-0.1-1.1 [ 28s] [3/254] installing dlog-config-persistent-logs-9.0.1-1 [ 28s] [4/254] installing libmagic-data-5.45-1.25 [ 28s] [5/254] installing pcre2-syntax-10.40-1 [ 29s] [6/254] installing setup-0.9-1.7 [ 29s] [7/254] installing filesystem-3.1-1.1 [ 29s] [8/254] installing glibc-2.40-2.6 [ 30s] [9/254] installing libatomic-14.2.0-3.6 [ 31s] [10/254] installing libgcc-14.2.0-3.6 [ 31s] [11/254] installing libgomp-14.2.0-3.6 [ 32s] [12/254] installing libitm-14.2.0-3.6 [ 32s] [13/254] installing libgfortran-14.2.0-3.6 [ 32s] [14/254] installing libstdc++-14.2.0-3.6 [ 33s] [15/254] installing coreutils-6.9-14.9 [ 34s] [16/254] installing libstdc++-devel-14.2.0-3.6 [ 36s] [17/254] installing linux-glibc-devel-6.6-1.27 [ 37s] [18/254] installing libasan-14.2.0-3.6 [ 37s] [19/254] installing libcc1-14.2.0-3.6 [ 38s] [20/254] installing libubsan-14.2.0-3.6 [ 38s] [21/254] installing capi-base-common-0.4.82-1 [ 39s] [22/254] installing cpio-2.8-1.2 [ 39s] [23/254] installing findutils-4.3.8-1.27 [ 40s] [24/254] installing fribidi-1.0.10-1.2 [ 40s] [25/254] installing gdbm-1.8.3-1.27 [ 41s] [26/254] installing giflib-5.2.2-1.9 [ 41s] [27/254] installing hostname-3.23-1.2 [ 41s] [28/254] installing iniparser-4.1-1.2 [ 42s] [29/254] installing libattr-2.5.1-1.27 [ 43s] [30/254] installing libbz2-1.0.8-1.27 [ 43s] [31/254] installing libcap-2.73-1.2 [ 44s] [32/254] installing libdrm-2.4.118-1.2 [ 44s] [33/254] installing libexpat-2.6.2-1.27 [ 45s] [34/254] installing libffi-3.4.2-2.16 [ 46s] [35/254] installing libhyphen-2.8.8-1 [ 46s] [36/254] installing libjpeg-8.2.2-1.7 [ 47s] [37/254] installing libjson-0.18-0 [ 47s] [38/254] installing libltdl-2.4.7-1.27 [ 48s] [39/254] installing liblua-5.1.5-1.25 [ 48s] [40/254] installing libpopt-1.16-1.24 [ 49s] [41/254] installing libsmack-1.3.1-1.24 [ 49s] [42/254] installing libsmartcols-2.39.3-2.6 [ 50s] [43/254] installing libuuid-2.39.3-2.6 [ 50s] [44/254] installing libwayland-egl-1.22.0-0 [ 51s] [45/254] installing libxcrypt-4.4.36-1.25 [ 51s] [46/254] installing libxkbcommon-1.6.0-0 [ 51s] [47/254] installing m4-1.4.19-1.2 [ 51s] [48/254] installing net-tools-2.0_20121208git-1.23 [ 52s] [49/254] installing nspr-4.35-1.24 [ 52s] [50/254] installing patch-2.7.6-1.24 [ 53s] [51/254] installing sed-4.1c-1.25 [ 53s] [52/254] installing which-2.17-1.2 [ 53s] [53/254] installing xdgmime-0.0.17-1.2 [ 54s] [54/254] installing zlib-1.3.1-2.6 [ 54s] [55/254] installing asan-runtime-env-14.2.0-1.12 [ 54s] [56/254] installing bash-3.2.57-1.2 [ 55s] [57/254] installing diffutils-3.10-1.2 [ 55s] [58/254] installing libblkid-2.39.3-2.6 [ 56s] [59/254] installing libfreebl3-3.98-1.24 [ 56s] [60/254] installing liblzma-5.6.3-1.20 [ 57s] [61/254] installing libopenssl11-1.1.1w-1.27 [ 58s] [62/254] installing libopenssl3-3.0.13-1.27 [ 58s] [63/254] installing libpcre-8.45-1.26 [ 59s] [64/254] installing libsqlite-3.48.0-1.27 [ 59s] [65/254] installing libunwind-1.6.2-1.7 [ 60s] [66/254] installing libwebp-1.4.0-1.3 [ 60s] [67/254] installing libxml2-2.13.5-1.2 [ 61s] [68/254] installing libzstd1-1.5.6-1.19 [ 62s] [69/254] installing pixman-0.38.4-0 [ 62s] [70/254] installing pkg-config-0.29.2-1.26 [ 62s] [71/254] installing update-alternatives-1.22.2-1.2 [ 62s] [72/254] installing libnss-security-manager-1.9.18-0 [ 63s] [73/254] installing pcre2-10.40-1 [ 63s] [74/254] installing boost-atomic-1.83.0-1.4 [ 64s] [75/254] installing boost-program-options-1.83.0-1.4 [ 64s] [76/254] installing build-compare-2023.06.18-1.9 [ 64s] [77/254] installing hal-rootstrap-checker-0.1.0-1.1 [ 64s] [78/254] installing qemu-linux-user-x86_64-cross-9.2.0-3.5 [ 66s] [79/254] installing asan-build-env-14.2.0-1.12 [ 66s] libasan.so is already preloaded [ 66s] [80/254] installing cpp-14.2.0-3.6 [ 67s] [81/254] installing gcc-c++-14.2.0-3.6 [ 69s] [82/254] installing terminfo-base-full-6.4-1.27 [ 69s] [83/254] installing gawk-3.1.5-1.2 [ 70s] [84/254] installing glibc-locale-2.40-2.6 [ 70s] [85/254] installing grep-2.5.2-1.23 [ 71s] [86/254] installing libacl-2.3.2-1.25 [ 71s] [87/254] installing libelf-0.189-1.25 [ 71s] [88/254] installing libpng-1.6.44-0 [ 72s] [89/254] installing libxcrypt-devel-4.4.36-1.25 [ 72s] [90/254] installing make-4.4.1-1.8 [ 72s] [91/254] installing minizip-1.3.1-2.6 [ 72s] [92/254] installing nss-certs-3.98-1.24 [ 73s] [93/254] installing smack-1.3.1-1.24 [ 73s] [94/254] installing binutils-libs-2.43-1.26 [ 73s] [95/254] installing bzip2-1.0.8-1.27 [ 73s] [96/254] installing gzip-1.13-1.25 [ 73s] [97/254] installing libcap-tools-2.73-1.2 [ 74s] [98/254] installing libglib-2.80.5-0 [ 74s] [99/254] installing libmagic-5.45-1.25 [ 74s] [100/254] installing libmount-2.39.3-2.6 [ 75s] [101/254] installing sqlite-3.48.0-1.27 [ 75s] [102/254] installing xz-5.6.3-1.20 [ 75s] [103/254] installing libfdisk-2.39.3-2.6 [ 76s] [104/254] installing libicu-76.1-1.3 [ 76s] [105/254] installing shadow-utils-4.1.4.2-7.9 [ 77s] [106/254] installing tzdata-2024b-1.1 [ 77s] [107/254] installing boost-filesystem-1.83.0-1.4 [ 77s] [108/254] installing dlog-9.0.1-1 [ 78s] [109/254] installing libkmod-33-1.1 [ 78s] [110/254] installing pam-1.1.6-1.23 [ 79s] [111/254] installing perl-5.38.0-1.20 [ 80s] [112/254] installing cynara-db-migration-0.19.7-1 [ 81s] [113/254] installing libtiff-4.7.0-1.3 [ 81s] [114/254] installing ttrace-1.1.0-1 [ 81s] [115/254] installing gcc-14.2.0-3.6 [ 82s] [116/254] installing build-mkbaselibs-20120927-1.1 [ 82s] [117/254] installing qemu-accel-x86_64-riscv64-0.4-1.8 [ 103s] [118/254] installing acl-2.3.2-1.25 [ 103s] [119/254] installing autoconf-2.71-1.27 [ 104s] [120/254] installing dlog-logger-9.0.1-1 [ 104s] [121/254] installing file-5.45-1.25 [ 105s] [122/254] installing glibc-devel-2.40-2.6 [ 105s] [123/254] installing libgmodule-2.80.5-0 [ 106s] [124/254] installing tizen-platform-config-5.0-1 [ 111s] [125/254] installing binutils-2.43-1.26 [ 113s] [126/254] installing tar-1.17-1.2 [ 114s] [127/254] installing libfreetype-2.13.2-1 [ 114s] [128/254] installing libgobject-2.80.5-0 [ 115s] [129/254] installing libncurses6-6.4-1.27 [ 115s] [130/254] installing libsystemd-244-0 [ 116s] [131/254] installing security-config-1.0-1 [ 137s] groupadd: group 'dbus' already exists [ 137s] groupadd: group 'priv_appdebugging' already exists [ 137s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 137s] cat: /etc/tizen-build.conf: No such file or directory [ 137s] [132/254] installing thorvg-0.8.17-1 [ 138s] [133/254] installing libdw-0.189-1.25 [ 138s] [134/254] installing nss-3.98-1.24 [ 138s] [135/254] installing shared-mime-info-1.7-0 [ 156s] [136/254] installing libarchive-3.7.7-1.7 [ 156s] [137/254] installing libncurses-6.4-1.27 [ 156s] [138/254] installing automake-1.16.5-1.27 [ 157s] [139/254] installing dbus-libs-1.12.20-3 [ 157s] [140/254] installing libtzplatform-config-5.0-1 [ 157s] [141/254] installing less-668-1.2 [ 158s] [142/254] installing libasm-0.189-1.25 [ 158s] [143/254] installing libreadline-5.2-1.27 [ 159s] [144/254] installing build-20120927-1.1 [ 159s] [145/254] installing libdlog-9.0.1-1 [ 160s] [146/254] installing libharfbuzz-8.2.2-0 [ 161s] [147/254] installing libsoftokn3-3.98-1.24 [ 161s] [148/254] installing fontconfig-2.14.2-1 [ 163s] [149/254] installing libgio-2.80.5-0 [ 163s] [150/254] installing rpm-4.14.1.1-1.24 [ 164s] [151/254] installing gio-branding-upstream-2.80.5-0 [ 164s] [152/254] installing capi-system-resource-1.0.0-0 [ 164s] [153/254] installing libwayland-egl-tizen-1.0.1-0 [ 165s] [154/254] installing tizen-platform-config-tools-5.0-1 [ 165s] [155/254] installing libwayland-client-1.22.0-0 [ 165s] [156/254] installing libwayland-server-1.22.0-0 [ 165s] [157/254] installing asan-force-options-14.2.0-1.12 [ 170s] [158/254] installing libjson-glib-1.8.0-0 [ 170s] [159/254] installing libtool-2.4.7-1.27 [ 170s] [160/254] installing lottie-player-0.2.3-1 [ 170s] [161/254] installing parcel-0.17.5-0 [ 170s] [162/254] installing elfutils-0.189-1.25 [ 170s] [163/254] installing hal-api-common-1.0.5-2 [ 171s] [164/254] installing libcynara-commons-0.19.7-1 [ 172s] [165/254] installing sessiond-0.7.8.0-1 [ 172s] /var/tmp/rpm-tmp.E30ugf: line 1: systemctl: command not found [ 172s] /var/tmp/rpm-tmp.E30ugf: line 2: systemctl: command not found [ 172s] warning: %post(sessiond-0.7.8.0-1.riscv64) scriptlet failed, exit status 127 [ 172s] [166/254] installing capi-system-info-0.5.2-1 [ 172s] Running capi-system-info %posttrans script [ 172s] I/O warning : failed to load "/etc/config/model-config.xml": No such file or directory [ 172s] iniparser: cannot open /etc/info.ini [ 172s] [167/254] installing util-linux-2.39.3-2.6 [ 173s] [168/254] installing systemd-244-0 [ 177s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 177s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 177s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 177s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 177s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 177s] [169/254] installing rpm-build-4.14.1.1-1.24 [ 177s] [170/254] installing libwayland-extension-client-1.3.61-0 [ 177s] [171/254] installing pkgmgr-0.20.21-0 [ 178s] Running pkgmgr %posttrans script [ 178s] /var/tmp/rpm-tmp.051Grb: line 5: pkg_initdb: command not found [ 178s] /var/tmp/rpm-tmp.051Grb: line 6: install_preload_pkg: command not found [ 178s] /var/tmp/rpm-tmp.051Grb: line 13: pkgcmd: command not found [ 178s] /var/tmp/rpm-tmp.051Grb: line 15: /etc/package-manager/pkgmgr-label-initial-image.sh: No such file or directory [ 178s] [172/254] installing libwayland-cursor-1.22.0-0 [ 178s] [173/254] installing util-linux-su-2.39.3-2.6 [ 179s] [174/254] installing libcynara-agent-0.19.7-1 [ 179s] [175/254] installing libcynara-creds-commons-0.19.7-1 [ 180s] [176/254] installing libcynara-session-0.19.7-1 [ 180s] [177/254] installing hal-api-tbm-1.0-1 [ 181s] [178/254] installing libcynara-client-0.19.7-1 [ 181s] [179/254] installing hal-api-sensor-0.0.1-1 [ 181s] [180/254] installing libcynara-admin-0.19.7-1 [ 181s] [181/254] installing libsessiond-0.7.8.0-1 [ 181s] [182/254] installing tizen-core-0.1.30-0 [ 182s] [183/254] installing bundle-0.17.5-0 [ 182s] [184/254] installing libsyscommon-5.0.0-0 [ 182s] [185/254] installing cynara-0.19.7-1 [ 183s] Running in chroot, ignoring request: daemon-reload [ 183s] Running in chroot, ignoring request: restart [ 183s] [186/254] installing cyad-0.19.7-1 [ 183s] [187/254] installing libcynara-creds-pid-0.19.7-1 [ 183s] [188/254] installing libcynara-creds-self-0.19.7-1 [ 183s] [189/254] installing libcynara-creds-socket-0.19.7-1 [ 183s] [190/254] installing efl-1.25.1-0 [ 183s] [191/254] installing libtbm-4.5.5-1 [ 184s] [192/254] installing buxton2-1.8.10-0 [ 186s] Running buxton2 %posttrans script [ 186s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 186s] /etc/buxton2/*: No such file or directory [ 186s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 186s] /var/lib/buxton2/*: No such file or directory [ 186s] [193/254] installing eina-1.25.1-0 [ 186s] [194/254] installing libwayland-tbm-client-0.8.14-0 [ 186s] [195/254] installing hal-api-tdm-1.0-1 [ 187s] [196/254] installing libwayland-tbm-server-0.8.14-0 [ 187s] [197/254] installing vconf-compat-1.8.10-0 [ 187s] [198/254] installing embryo-1.25.1-0 [ 188s] [199/254] installing eo-1.25.1-0 [ 188s] [200/254] installing emile-1.25.1-0 [ 188s] [201/254] installing libstorage-1.0.0-0 [ 188s] [202/254] installing libtdm-3.2.0-0 [ 189s] [203/254] installing sensord-4.0.54-1 [ 189s] /usr/lib64 / [ 189s] / [ 189s] [204/254] installing pkgmgr-info-0.28.7-1 [ 190s] [205/254] installing ector-1.25.1-0 [ 190s] [206/254] installing pkgmgr-info-parser-0.28.7-1 [ 190s] [207/254] installing eet-1.25.1-0 [ 190s] [208/254] installing libtdm-client-3.2.0-0 [ 190s] [209/254] installing ecore-core-1.25.1-0 [ 190s] [210/254] installing security-privilege-manager-1.3.1-0 [ 192s] mdm blacklist exist [ 192s] Check inserted data [ 192s] DPM blacklist... [ 192s] [ 192s] MDM blacklist... [ 192s] [211/254] installing aul-0.70.0-1 [ 193s] [212/254] installing ecore-imf-1.25.1-0 [ 193s] [213/254] installing ecore-audio-1.25.1-0 [ 193s] [214/254] installing eldbus-1.25.1-0 [ 193s] [215/254] installing capi-appfw-preference-0.6.22-0 [ 193s] [216/254] installing aul-rsc-mgr-0.70.0-1 [ 193s] [217/254] installing ecore-con-1.25.1-0 [ 194s] [218/254] installing app-core-common-1.25.10-0 [ 194s] [219/254] installing libtpl-egl-1.12.1-0 [ 194s] [220/254] installing rpc-port-1.19.6-0 [ 194s] [221/254] installing security-manager-1.9.18-0 [ 196s] Running in chroot, ignoring request: daemon-reload [ 196s] Running in chroot, ignoring request: start [ 196s] [222/254] installing coregl-0.2.0-0 [ 196s] [223/254] installing ecore-file-1.25.1-0 [ 196s] [224/254] installing security-manager-policy-1.9.18-0 [ 218s] Running in chroot, ignoring request: stop [ 218s] Running in chroot, ignoring request: start [ 218s] [225/254] installing ecore-ipc-1.25.1-0 [ 218s] [226/254] installing libsecurity-manager-client-1.9.18-0 [ 218s] [227/254] installing capi-appfw-app-common-0.12.3-0 [ 218s] [228/254] installing capi-appfw-app-control-0.23.0-0 [ 218s] [229/254] installing pkgmgr-client-0.20.21-0 [ 219s] [230/254] installing pkgmgr-installer-0.20.21-0 [ 219s] [231/254] installing eeze-1.25.1-0 [ 219s] [232/254] installing capi-appfw-app-manager-0.13.9-1 [ 220s] [233/254] installing efreet-1.25.1-0 [ 220s] [234/254] installing appcore-agent-1.4.2-1 [ 220s] [235/254] installing capi-appfw-package-manager-0.12.1-1 [ 220s] [236/254] installing security-license-manager-1.9.18-0 [ 221s] Running in chroot, ignoring request: daemon-reload [ 221s] Running in chroot, ignoring request: start [ 221s] [237/254] installing ecore-input-1.25.1-0 [ 221s] [238/254] installing eio-1.25.1-0 [ 221s] [239/254] installing notification-0.7.22-1 [ 221s] [240/254] installing ecore-fb-1.25.1-0 [ 221s] [241/254] installing ecore-wl2-1.25.1-0 [ 222s] [242/254] installing evas-1.25.1-0 [ 222s] [243/254] installing ecore-imf-evas-1.25.1-0 [ 222s] [244/254] installing ecore-input-evas-1.25.1-0 [ 222s] [245/254] installing ecore-evas-1.25.1-0 [ 222s] [246/254] installing edje-1.25.1-0 [ 222s] [247/254] installing emotion-1.25.1-0 [ 223s] [248/254] installing ethumb-1.25.1-0 [ 223s] [249/254] installing elementary-1.25.1-0 [ 224s] [250/254] installing capi-ui-efl-util-0.7.34-1 [ 224s] [251/254] installing efl-extension-0.1.8-1 [ 224s] [252/254] installing isf-10.0.6-1 [ 225s] [253/254] installing isf-devel-10.0.6-1 [ 225s] [254/254] installing org.tizen.isf-kbd-mode-changer-10.0.6-1 [ 225s] removing nis flags from /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/BUILD-ROOTS/scratch.riscv64.19/etc/nsswitch.conf... [ 225s] now finalizing build dir... [ 226s] ----------------------------------------------------------------- [ 226s] ----- building ise-engine-default.spec (user abuild) [ 226s] ----------------------------------------------------------------- [ 226s] ----------------------------------------------------------------- [ 227s] + exec rpmbuild --define 'jobs 8' --define '_smp_mflags -j8' --define '_srcdefattr (-,root,root)' --nosignature --target=riscv64-tizen-linux --define '_build_create_debug 1' -bb /home/abuild/rpmbuild/SOURCES/ise-engine-default.spec [ 227s] Building target platforms: riscv64-tizen-linux [ 227s] Building for target riscv64-tizen-linux [ 227s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.y0fqlh [ 227s] + umask 022 [ 227s] + cd /home/abuild/rpmbuild/BUILD [ 227s] + cd /home/abuild/rpmbuild/BUILD [ 227s] + rm -rf ise-engine-default-1.0.11 [ 227s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ise-engine-default-1.0.11.tar.gz [ 227s] + /bin/tar -xof - [ 227s] + STATUS=0 [ 227s] + '[' 0 -ne 0 ']' [ 227s] + cd ise-engine-default-1.0.11 [ 227s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 227s] + exit 0 [ 227s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.GREmGa [ 227s] + umask 022 [ 227s] + cd /home/abuild/rpmbuild/BUILD [ 227s] + cd ise-engine-default-1.0.11 [ 227s] + ref=/usr/lib/rpm [ 227s] + mints=0 [ 227s] + case $(uname -m) in [ 227s] ++ uname -m [ 227s] + mints=20160911 [ 227s] + for s in guess sub [ 227s] ++ find -maxdepth 8 -name config.guess [ 227s] + for s in guess sub [ 227s] ++ find -maxdepth 8 -name config.sub [ 227s] + LANG=C [ 227s] + export LANG [ 227s] + unset DISPLAY [ 227s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 227s] + export CFLAGS [ 227s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 227s] + export CXXFLAGS [ 227s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 227s] + export FFLAGS [ 227s] + LDFLAGS= [ 227s] + export LDFLAGS [ 227s] + export 'CFLAGS+= -Werror -fvisibility=hidden' [ 227s] + CFLAGS+=' -Werror -fvisibility=hidden' [ 227s] + export 'CXXFLAGS+= -Werror -fvisibility=hidden -fvisibility-inlines-hidden' [ 227s] + CXXFLAGS+=' -Werror -fvisibility=hidden -fvisibility-inlines-hidden' [ 227s] + AR=gcc-ar [ 227s] + export AR [ 227s] + NM=/bin/nm [ 227s] + export NM [ 227s] + RANLIB=gcc-ranlib [ 227s] + export RANLIB [ 227s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden' [ 227s] + export CFLAGS [ 227s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden -fvisibility-inlines-hidden' [ 227s] + export CXXFLAGS [ 227s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 227s] + export FFLAGS [ 227s] + ./autogen.sh --build=riscv64-tizen-linux-gnu --host=riscv64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 227s] + libtoolize --force [ 227s] libtoolize: putting auxiliary files in '.'. [ 227s] libtoolize: linking file './compile' [ 227s] libtoolize: linking file './config.guess' [ 228s] libtoolize: linking file './config.sub' [ 228s] libtoolize: linking file './depcomp' [ 228s] libtoolize: linking file './install-sh' [ 228s] libtoolize: linking file './missing' [ 228s] libtoolize: linking file './ltmain.sh' [ 228s] libtoolize: putting macros in 'm4'. [ 228s] libtoolize: linking file 'm4/libtool.m4' [ 228s] libtoolize: linking file 'm4/ltargz.m4' [ 228s] libtoolize: linking file 'm4/ltdl.m4' [ 228s] libtoolize: linking file 'm4/ltoptions.m4' [ 229s] libtoolize: linking file 'm4/ltsugar.m4' [ 229s] libtoolize: linking file 'm4/ltversion.m4' [ 229s] libtoolize: linking file 'm4/lt~obsolete.m4' [ 230s] libtoolize: putting libltdl files in 'libltdl'. [ 230s] libtoolize: linking file 'libltdl/COPYING.LIB' [ 230s] libtoolize: creating file 'libltdl/Makefile.am' [ 230s] libtoolize: linking file 'libltdl/README' [ 230s] libtoolize: creating file 'libltdl/configure.ac' [ 231s] libtoolize: copying file 'libltdl/aclocal.m4' [ 231s] libtoolize: creating file 'libltdl/Makefile.in' [ 231s] libtoolize: linking file 'libltdl/config-h.in' [ 231s] libtoolize: creating file 'libltdl/configure' [ 231s] libtoolize: linking file 'libltdl/libltdl/lt__alloc.h' [ 231s] libtoolize: linking file 'libltdl/libltdl/lt__argz_.h' [ 231s] libtoolize: linking file 'libltdl/libltdl/lt__dirent.h' [ 231s] libtoolize: linking file 'libltdl/libltdl/lt__glibc.h' [ 231s] libtoolize: linking file 'libltdl/libltdl/lt__private.h' [ 231s] libtoolize: linking file 'libltdl/libltdl/lt__strl.h' [ 231s] libtoolize: linking file 'libltdl/libltdl/lt_dlloader.h' [ 232s] libtoolize: linking file 'libltdl/libltdl/lt_error.h' [ 232s] libtoolize: linking file 'libltdl/libltdl/lt_system.h' [ 232s] libtoolize: linking file 'libltdl/libltdl/slist.h' [ 232s] libtoolize: linking file 'libltdl/loaders/dld_link.c' [ 232s] libtoolize: linking file 'libltdl/loaders/dlopen.c' [ 232s] libtoolize: linking file 'libltdl/loaders/dyld.c' [ 232s] libtoolize: linking file 'libltdl/loaders/load_add_on.c' [ 232s] libtoolize: linking file 'libltdl/loaders/loadlibrary.c' [ 232s] libtoolize: linking file 'libltdl/loaders/preopen.c' [ 232s] libtoolize: linking file 'libltdl/loaders/shl_load.c' [ 233s] libtoolize: linking file 'libltdl/lt__alloc.c' [ 233s] libtoolize: linking file 'libltdl/lt__argz.c' [ 233s] libtoolize: linking file 'libltdl/lt__dirent.c' [ 233s] libtoolize: linking file 'libltdl/lt__strl.c' [ 233s] libtoolize: linking file 'libltdl/lt_dlloader.c' [ 233s] libtoolize: linking file 'libltdl/lt_error.c' [ 233s] libtoolize: linking file 'libltdl/ltdl.c' [ 233s] libtoolize: linking file 'libltdl/ltdl.h' [ 233s] libtoolize: linking file 'libltdl/slist.c' [ 233s] libtoolize: Remember to add 'LT_CONFIG_LTDL_DIR([libltdl])' to 'configure.ac'. [ 233s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, [ 233s] libtoolize: and rerunning libtoolize and aclocal. [ 233s] + aclocal -I ./m4 [ 256s] + autoheader [ 267s] + libtoolize -c --automake [ 268s] libtoolize: error: './compile' exists: use '--force' to overwrite [ 268s] libtoolize: error: './depcomp' exists: use '--force' to overwrite [ 269s] libtoolize: error: './missing' exists: use '--force' to overwrite [ 273s] libtoolize: error: 'libltdl/COPYING.LIB' exists: use '--force' to overwrite [ 273s] libtoolize: error: 'libltdl/Makefile.am' exists: use '--force' to overwrite [ 273s] libtoolize: error: 'libltdl/README' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/configure.ac' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/aclocal.m4' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/Makefile.in' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/config-h.in' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/configure' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/libltdl/lt__alloc.h' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/libltdl/lt__argz_.h' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/libltdl/lt__dirent.h' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/libltdl/lt__glibc.h' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/libltdl/lt__private.h' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/libltdl/lt__strl.h' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/libltdl/lt_dlloader.h' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/libltdl/lt_error.h' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/libltdl/lt_system.h' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/libltdl/slist.h' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/loaders/dld_link.c' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/loaders/dlopen.c' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/loaders/dyld.c' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/loaders/load_add_on.c' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/loaders/loadlibrary.c' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/loaders/preopen.c' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/loaders/shl_load.c' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/lt__alloc.c' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/lt__argz.c' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/lt__dirent.c' exists: use '--force' to overwrite [ 274s] libtoolize: error: 'libltdl/lt__strl.c' exists: use '--force' to overwrite [ 275s] libtoolize: error: 'libltdl/lt_dlloader.c' exists: use '--force' to overwrite [ 275s] libtoolize: error: 'libltdl/lt_error.c' exists: use '--force' to overwrite [ 275s] libtoolize: error: 'libltdl/ltdl.c' exists: use '--force' to overwrite [ 275s] libtoolize: error: 'libltdl/ltdl.h' exists: use '--force' to overwrite [ 275s] libtoolize: error: 'libltdl/slist.c' exists: use '--force' to overwrite [ 275s] + automake --add-missing --copy --include-deps [ 287s] Makefile.am: installing './INSTALL' [ 287s] Makefile.am: installing './COPYING' using GNU General Public License v3 file [ 287s] Makefile.am: Consider adding the COPYING file to the version control system [ 287s] Makefile.am: for your code, to avoid questions about which license your project uses [ 290s] + autoconf [ 297s] configure.ac:22: warning: 'AM_CONFIG_HEADER': this macro is obsolete. [ 297s] configure.ac:22: You should use the 'AC_CONFIG_HEADERS' macro instead. [ 297s] ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... [ 297s] aclocal.m4:1021: AM_CONFIG_HEADER is expanded from... [ 297s] configure.ac:22: the top level [ 297s] configure.ac:29: warning: The macro `AC_LIBTOOL_DLOPEN' is obsolete. [ 297s] configure.ac:29: You should run autoupdate. [ 297s] m4/ltoptions.m4:113: AC_LIBTOOL_DLOPEN is expanded from... [ 297s] configure.ac:29: the top level [ 297s] configure.ac:29: warning: AC_LIBTOOL_DLOPEN: Remove this warning and the call to _LT_SET_OPTION when you [ 297s] configure.ac:29: put the 'dlopen' option into LT_INIT's first parameter. [ 297s] ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... [ 297s] m4/ltoptions.m4:113: AC_LIBTOOL_DLOPEN is expanded from... [ 297s] configure.ac:29: the top level [ 297s] configure.ac:31: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 297s] configure.ac:31: You should run autoupdate. [ 297s] m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... [ 297s] configure.ac:31: the top level [ 297s] configure.ac:32: warning: The macro `AC_LIB_LTDL' is obsolete. [ 297s] configure.ac:32: You should run autoupdate. [ 297s] m4/ltdl.m4:353: AC_LIB_LTDL is expanded from... [ 297s] configure.ac:32: the top level [ 297s] configure.ac:55: warning: The macro `AC_HEADER_STDC' is obsolete. [ 297s] configure.ac:55: You should run autoupdate. [ 297s] ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... [ 297s] configure.ac:55: the top level [ 306s] + [[ -e config.sub ]] [ 306s] ++ automake --print-libdir [ 311s] + install -m 0755 /usr/share/automake-1.16/config.sub config.sub [ 311s] + AR=gcc-ar [ 311s] + export AR [ 311s] + NM=/bin/nm [ 311s] + export NM [ 311s] + RANLIB=gcc-ranlib [ 311s] + export RANLIB [ 311s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden' [ 311s] + export CFLAGS [ 311s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden -fvisibility-inlines-hidden' [ 311s] + export CXXFLAGS [ 311s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 311s] + export FFLAGS [ 311s] + ./configure --build=riscv64-tizen-linux-gnu --host=riscv64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static [ 313s] checking for a BSD-compatible install... /bin/install -c [ 313s] checking whether build environment is sane... yes [ 313s] checking for a race-free mkdir -p... /bin/mkdir -p [ 313s] checking for gawk... gawk [ 313s] checking whether make sets $(MAKE)... yes [ 313s] checking whether make supports nested variables... yes [ 313s] ./configure: line 3737: PLATFORM_INIT: command not found [ 313s] checking build system type... riscv64-tizen-linux-gnu [ 313s] checking host system type... riscv64-tizen-linux-gnu [ 313s] checking how to print strings... printf [ 313s] checking whether make supports the include directive... yes (GNU style) [ 313s] checking for riscv64-tizen-linux-gnu-gcc... riscv64-tizen-linux-gnu-gcc [ 314s] checking whether the C compiler works... yes [ 314s] checking for C compiler default output file name... a.out [ 314s] checking for suffix of executables... [ 314s] checking whether we are cross compiling... no [ 315s] checking for suffix of object files... o [ 315s] checking whether the compiler supports GNU C... yes [ 315s] checking whether riscv64-tizen-linux-gnu-gcc accepts -g... yes [ 315s] checking for riscv64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 315s] checking whether riscv64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 315s] checking dependency style of riscv64-tizen-linux-gnu-gcc... gcc3 [ 316s] checking for a sed that does not truncate output... /bin/sed [ 316s] checking for grep that handles long lines and -e... /bin/grep [ 316s] checking for egrep... /bin/grep -E [ 316s] checking for fgrep... /bin/grep -F [ 316s] checking for ld used by riscv64-tizen-linux-gnu-gcc... /usr/riscv64-tizen-linux-gnu/bin/ld [ 316s] checking if the linker (/usr/riscv64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 316s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 316s] checking the name lister (/bin/nm) interface... BSD nm [ 316s] checking whether ln -s works... yes [ 316s] checking the maximum length of command line arguments... 1572864 [ 316s] checking how to convert riscv64-tizen-linux-gnu file names to riscv64-tizen-linux-gnu format... func_convert_file_noop [ 316s] checking how to convert riscv64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 316s] checking for /usr/riscv64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 316s] checking for riscv64-tizen-linux-gnu-file... no [ 316s] checking for file... file [ 316s] checking for riscv64-tizen-linux-gnu-objdump... no [ 316s] checking for objdump... objdump [ 316s] checking how to recognize dependent libraries... pass_all [ 316s] checking for riscv64-tizen-linux-gnu-dlltool... no [ 316s] checking for dlltool... no [ 316s] checking how to associate runtime and link libraries... printf %s\n [ 316s] checking for riscv64-tizen-linux-gnu-ar... gcc-ar [ 316s] checking for archiver @FILE support... @ [ 316s] checking for riscv64-tizen-linux-gnu-strip... no [ 316s] checking for strip... strip [ 316s] checking for riscv64-tizen-linux-gnu-ranlib... gcc-ranlib [ 317s] checking command to parse /bin/nm output from riscv64-tizen-linux-gnu-gcc object... ok [ 317s] checking for sysroot... no [ 317s] checking for a working dd... /bin/dd [ 317s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 317s] checking for riscv64-tizen-linux-gnu-mt... no [ 317s] checking for mt... no [ 317s] checking if : is a manifest tool... no [ 317s] checking for stdio.h... yes [ 317s] checking for stdlib.h... yes [ 318s] checking for string.h... yes [ 318s] checking for inttypes.h... yes [ 318s] checking for stdint.h... yes [ 318s] checking for strings.h... yes [ 318s] checking for sys/stat.h... yes [ 318s] checking for sys/types.h... yes [ 318s] checking for unistd.h... yes [ 318s] checking for dlfcn.h... yes [ 318s] checking for objdir... .libs [ 319s] checking if riscv64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 319s] checking for riscv64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 319s] checking if riscv64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 319s] checking if riscv64-tizen-linux-gnu-gcc static flag -static works... no [ 319s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 319s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 319s] checking whether the riscv64-tizen-linux-gnu-gcc linker (/usr/riscv64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 319s] checking whether -lc should be explicitly linked in... no [ 320s] checking dynamic linker characteristics... GNU/Linux ld.so [ 320s] checking how to hardcode library paths into programs... immediate [ 320s] checking for shl_load... no [ 320s] checking for shl_load in -ldld... no [ 321s] checking for dlopen... yes [ 321s] checking whether a program can dlopen itself... yes [ 321s] checking whether a statically linked program can dlopen itself... yes [ 321s] checking whether stripping libraries is possible... yes [ 321s] checking if libtool supports shared libraries... yes [ 321s] checking whether to build shared libraries... yes [ 321s] checking whether to build static libraries... no [ 321s] checking for riscv64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed [ 321s] checking what extension is used for runtime loadable modules... .so [ 321s] checking what variable specifies run-time module search path... LD_LIBRARY_PATH [ 321s] checking for the default library search path... /lib /usr/lib /usr/local/lib64 /usr/local/lib /usr/lib/hal /usr/lib64/hal [ 321s] checking for library containing dlopen... none required [ 322s] checking for dlerror... yes [ 322s] checking for shl_load... (cached) no [ 322s] checking for shl_load in -ldld... (cached) no [ 322s] checking for dld_link in -ldld... no [ 322s] checking for _ prefix in compiled symbols... no [ 322s] checking whether deplibs are loaded by dlopen... yes [ 322s] checking for argz.h... yes [ 322s] checking for error_t... yes [ 322s] checking for argz_add... yes [ 323s] checking for argz_append... yes [ 323s] checking for argz_count... yes [ 323s] checking for argz_create_sep... yes [ 323s] checking for argz_insert... yes [ 323s] checking for argz_next... yes [ 324s] checking for argz_stringify... yes [ 324s] checking if argz actually works... yes [ 324s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 324s] checking for ltdl.h... yes [ 324s] checking whether lt_dlinterface_register is declared... yes [ 324s] checking for lt_dladvise_preload in -lltdl... yes [ 324s] checking where to find libltdl headers... [ 324s] checking where to find libltdl library... -lltdl [ 324s] checking for unistd.h... (cached) yes [ 324s] checking for dl.h... no [ 324s] checking for sys/dl.h... no [ 324s] checking for dld.h... no [ 325s] checking for mach-o/dyld.h... no [ 325s] checking for dirent.h... yes [ 325s] checking for closedir... yes [ 325s] checking for opendir... yes [ 326s] checking for readdir... yes [ 326s] checking for strlcat... yes [ 326s] checking for strlcpy... yes [ 326s] checking for riscv64-tizen-linux-gnu-g++... riscv64-tizen-linux-gnu-g++ [ 327s] checking whether the compiler supports GNU C++... yes [ 327s] checking whether riscv64-tizen-linux-gnu-g++ accepts -g... yes [ 327s] checking for riscv64-tizen-linux-gnu-g++ option to enable C++11 features... none needed [ 327s] checking dependency style of riscv64-tizen-linux-gnu-g++... gcc3 [ 327s] checking how to run the C++ preprocessor... riscv64-tizen-linux-gnu-g++ -E [ 328s] checking for ld used by riscv64-tizen-linux-gnu-g++... /usr/riscv64-tizen-linux-gnu/bin/ld [ 328s] checking if the linker (/usr/riscv64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 328s] checking whether the riscv64-tizen-linux-gnu-g++ linker (/usr/riscv64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 329s] checking for riscv64-tizen-linux-gnu-g++ option to produce PIC... -fPIC -DPIC [ 329s] checking if riscv64-tizen-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes [ 329s] checking if riscv64-tizen-linux-gnu-g++ static flag -static works... no [ 329s] checking if riscv64-tizen-linux-gnu-g++ supports -c -o file.o... yes [ 329s] checking if riscv64-tizen-linux-gnu-g++ supports -c -o file.o... (cached) yes [ 329s] checking whether the riscv64-tizen-linux-gnu-g++ linker (/usr/riscv64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 329s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 329s] checking how to hardcode library paths into programs... immediate [ 329s] checking for riscv64-tizen-linux-gnu-gcc... (cached) riscv64-tizen-linux-gnu-gcc [ 329s] checking whether the compiler supports GNU C... (cached) yes [ 329s] checking whether riscv64-tizen-linux-gnu-gcc accepts -g... (cached) yes [ 329s] checking for riscv64-tizen-linux-gnu-gcc option to enable C11 features... (cached) none needed [ 329s] checking whether riscv64-tizen-linux-gnu-gcc understands -c and -o together... (cached) yes [ 329s] checking dependency style of riscv64-tizen-linux-gnu-gcc... (cached) gcc3 [ 329s] checking for an ANSI C-conforming const... yes [ 330s] checking for size_t... yes [ 330s] checking for riscv64-tizen-linux-gnu-pkg-config... /bin/riscv64-tizen-linux-gnu-pkg-config [ 330s] checking pkg-config is at least version 0.9.0... yes [ 330s] checking for isf >= 1.0.0... yes [ 330s] checking for egrep... (cached) /bin/grep -E [ 331s] checking that generated files are newer than configure... done [ 331s] configure: creating ./config.status [ 335s] config.status: creating Makefile [ 335s] config.status: creating src/Makefile [ 335s] config.status: creating data/Makefile [ 335s] config.status: creating config.h [ 336s] config.status: executing depfiles commands [ 336s] config.status: executing libtool commands [ 336s] === configuring in libltdl (/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/libltdl) [ 336s] configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr' '--build=riscv64-tizen-linux-gnu' '--host=riscv64-tizen-linux-gnu' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=riscv64-tizen-linux-gnu' 'host_alias=riscv64-tizen-linux-gnu' 'CFLAGS=-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden' 'LDFLAGS=' 'CXXFLAGS=-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden -fvisibility-inlines-hidden' 'PKG_CONFIG_PATH=:/usr/lib64/pkgconfig:/usr/share/pkgconfig' --cache-file=/dev/null --srcdir=. [ 338s] checking for a BSD-compatible install... /bin/install -c [ 338s] checking whether build environment is sane... yes [ 338s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 338s] checking for gawk... gawk [ 338s] checking whether make sets $(MAKE)... yes [ 338s] checking whether make supports nested variables... yes [ 338s] checking whether make supports nested variables... (cached) yes [ 338s] checking build system type... riscv64-tizen-linux-gnu [ 338s] checking host system type... riscv64-tizen-linux-gnu [ 338s] checking how to print strings... printf [ 338s] checking whether make supports the include directive... yes (GNU style) [ 338s] checking for riscv64-tizen-linux-gnu-gcc... riscv64-tizen-linux-gnu-gcc [ 338s] checking whether the C compiler works... yes [ 338s] checking for C compiler default output file name... a.out [ 338s] checking for suffix of executables... [ 339s] checking whether we are cross compiling... no [ 339s] checking for suffix of object files... o [ 339s] checking whether we are using the GNU C compiler... yes [ 339s] checking whether riscv64-tizen-linux-gnu-gcc accepts -g... yes [ 339s] checking for riscv64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 339s] checking whether riscv64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 340s] checking dependency style of riscv64-tizen-linux-gnu-gcc... gcc3 [ 340s] checking for a sed that does not truncate output... /bin/sed [ 340s] checking for grep that handles long lines and -e... /bin/grep [ 340s] checking for egrep... /bin/grep -E [ 340s] checking for fgrep... /bin/grep -F [ 340s] checking for ld used by riscv64-tizen-linux-gnu-gcc... /usr/riscv64-tizen-linux-gnu/bin/ld [ 340s] checking if the linker (/usr/riscv64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 340s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 340s] checking the name lister (/bin/nm) interface... BSD nm [ 340s] checking whether ln -s works... yes [ 340s] checking the maximum length of command line arguments... 1572864 [ 340s] checking how to convert riscv64-tizen-linux-gnu file names to riscv64-tizen-linux-gnu format... func_convert_file_noop [ 340s] checking how to convert riscv64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 340s] checking for /usr/riscv64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 340s] checking for riscv64-tizen-linux-gnu-file... no [ 340s] checking for file... file [ 340s] checking for riscv64-tizen-linux-gnu-objdump... no [ 340s] checking for objdump... objdump [ 340s] checking how to recognize dependent libraries... pass_all [ 340s] checking for riscv64-tizen-linux-gnu-dlltool... no [ 340s] checking for dlltool... no [ 340s] checking how to associate runtime and link libraries... printf %s\n [ 340s] checking for riscv64-tizen-linux-gnu-ar... gcc-ar [ 340s] checking for archiver @FILE support... @ [ 340s] checking for riscv64-tizen-linux-gnu-strip... no [ 340s] checking for strip... strip [ 340s] checking for riscv64-tizen-linux-gnu-ranlib... gcc-ranlib [ 341s] checking command to parse /bin/nm output from riscv64-tizen-linux-gnu-gcc object... ok [ 341s] checking for sysroot... no [ 341s] checking for a working dd... /bin/dd [ 341s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 341s] checking for riscv64-tizen-linux-gnu-mt... no [ 341s] checking for mt... no [ 341s] checking if : is a manifest tool... no [ 341s] checking how to run the C preprocessor... riscv64-tizen-linux-gnu-gcc -E [ 342s] checking for ANSI C header files... yes [ 342s] checking for sys/types.h... yes [ 342s] checking for sys/stat.h... yes [ 342s] checking for stdlib.h... yes [ 342s] checking for string.h... yes [ 342s] checking for memory.h... yes [ 342s] checking for strings.h... yes [ 342s] checking for inttypes.h... yes [ 342s] checking for stdint.h... yes [ 343s] checking for unistd.h... yes [ 343s] checking for dlfcn.h... yes [ 343s] checking for objdir... .libs [ 343s] checking if riscv64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 343s] checking for riscv64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 343s] checking if riscv64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 343s] checking if riscv64-tizen-linux-gnu-gcc static flag -static works... no [ 344s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 344s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 344s] checking whether the riscv64-tizen-linux-gnu-gcc linker (/usr/riscv64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 344s] checking whether -lc should be explicitly linked in... no [ 345s] checking dynamic linker characteristics... GNU/Linux ld.so [ 345s] checking how to hardcode library paths into programs... immediate [ 345s] checking for shl_load... no [ 345s] checking for shl_load in -ldld... no [ 345s] checking for dlopen... yes [ 346s] checking whether a program can dlopen itself... yes [ 346s] checking whether a statically linked program can dlopen itself... yes [ 346s] checking whether stripping libraries is possible... yes [ 346s] checking if libtool supports shared libraries... yes [ 346s] checking whether to build shared libraries... yes [ 346s] checking whether to build static libraries... no [ 346s] checking what extension is used for runtime loadable modules... .so [ 346s] checking what variable specifies run-time module search path... LD_LIBRARY_PATH [ 346s] checking for the default library search path... /lib /usr/lib /usr/local/lib64 /usr/local/lib /usr/lib/hal /usr/lib64/hal [ 346s] checking for library containing dlopen... none required [ 346s] checking for dlerror... yes [ 346s] checking for shl_load... (cached) no [ 346s] checking for shl_load in -ldld... (cached) no [ 347s] checking for dld_link in -ldld... no [ 347s] checking for _ prefix in compiled symbols... no [ 347s] checking whether deplibs are loaded by dlopen... yes [ 347s] checking for argz.h... yes [ 347s] checking for error_t... yes [ 347s] checking for argz_add... yes [ 348s] checking for argz_append... yes [ 348s] checking for argz_count... yes [ 348s] checking for argz_create_sep... yes [ 348s] checking for argz_insert... yes [ 349s] checking for argz_next... yes [ 349s] checking for argz_stringify... yes [ 349s] checking if argz actually works... yes [ 349s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 349s] checking for unistd.h... (cached) yes [ 349s] checking for dl.h... no [ 349s] checking for sys/dl.h... no [ 349s] checking for dld.h... no [ 349s] checking for mach-o/dyld.h... no [ 350s] checking for dirent.h... yes [ 350s] checking for closedir... yes [ 350s] checking for opendir... yes [ 350s] checking for readdir... yes [ 351s] checking for strlcat... yes [ 351s] checking for strlcpy... yes [ 351s] checking that generated files are newer than configure... done [ 351s] configure: creating ./config.status [ 354s] config.status: creating Makefile [ 354s] config.status: creating config.h [ 354s] config.status: executing depfiles commands [ 354s] config.status: executing libtool commands [ 355s] + make -j8 [ 355s] make all-recursive [ 355s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 355s] Making all in src [ 355s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/src' [ 355s] /bin/sh ../libtool --tag=CXX --mode=compile riscv64-tizen-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden -fvisibility-inlines-hidden -MT ise_engine_default_la-isf_default_imengine.lo -MD -MP -MF .deps/ise_engine_default_la-isf_default_imengine.Tpo -c -o ise_engine_default_la-isf_default_imengine.lo `test -f 'isf_default_imengine.cpp' || echo './'`isf_default_imengine.cpp [ 355s] libtool: compile: riscv64-tizen-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden -fvisibility-inlines-hidden -MT ise_engine_default_la-isf_default_imengine.lo -MD -MP -MF .deps/ise_engine_default_la-isf_default_imengine.Tpo -c isf_default_imengine.cpp -fPIC -DPIC -o .libs/ise_engine_default_la-isf_default_imengine.o [ 357s] mv -f .deps/ise_engine_default_la-isf_default_imengine.Tpo .deps/ise_engine_default_la-isf_default_imengine.Plo [ 357s] /bin/sh ../libtool --tag=CXX --mode=link riscv64-tizen-linux-gnu-g++ -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Werror -fvisibility=hidden -fvisibility-inlines-hidden -avoid-version -rpath /usr/lib64/scim-1.0/1.4.0/IMEngine -module -export-symbols-regex "^[^_].*" -lscim_imengine -lscim-1.0 -lisf-control -o ise-engine-default.la -rpath /usr/lib64/scim-1.0/1.4.0/IMEngine ise_engine_default_la-isf_default_imengine.lo [ 357s] libtool: link: /bin/nm .libs/ise_engine_default_la-isf_default_imengine.o | /bin/sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /bin/sed '/ __gnu_lto/d' | /bin/sed 's/.* //' | sort | uniq > .libs/ise-engine-default.exp [ 357s] libtool: link: /bin/grep -E -e "^[^_].*" ".libs/ise-engine-default.exp" > ".libs/ise-engine-default.expT" [ 357s] libtool: link: mv -f ".libs/ise-engine-default.expT" ".libs/ise-engine-default.exp" [ 357s] libtool: link: riscv64-tizen-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/crti.o /usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/crtbeginS.o .libs/ise_engine_default_la-isf_default_imengine.o -lscim_imengine -lscim-1.0 -lisf-control -L/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0 -L/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/../../../../riscv64-tizen-linux-gnu/lib -L/lib64 -L/usr/lib64 -lstdc++ -lm -lc -lgcc_s /usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/crtendS.o /usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/crtn.o -O2 -g2 -gdwarf-4 -fstack-protector-strong -Wl,-z -Wl,relro -Wl,--as-needed -mabi=lp64d -march=rv64gc -g -Wl,-soname -Wl,ise-engine-default.so -Wl,-retain-symbols-file -Wl,.libs/ise-engine-default.exp -o .libs/ise-engine-default.so [ 357s] libtool: link: ( cd ".libs" && rm -f "ise-engine-default.la" && ln -s "../ise-engine-default.la" "ise-engine-default.la" ) [ 357s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/src' [ 357s] Making all in data [ 357s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/data' [ 357s] make[2]: Nothing to be done for 'all'. [ 357s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/data' [ 357s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 357s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 357s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 357s] + exit 0 [ 357s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.sPdt9C [ 357s] + umask 022 [ 357s] + cd /home/abuild/rpmbuild/BUILD [ 357s] + cd ise-engine-default-1.0.11 [ 357s] + LANG=C [ 357s] + export LANG [ 357s] + unset DISPLAY [ 357s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 [ 357s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 [ 357s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 [ 357s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 install [ 357s] Making install in src [ 357s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/src' [ 357s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/src' [ 357s] make[2]: Nothing to be done for 'install-exec-am'. [ 357s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/lib64/scim-1.0/1.4.0/IMEngine' [ 357s] /bin/sh ../libtool --mode=install /bin/install -c ise-engine-default.la '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/lib64/scim-1.0/1.4.0/IMEngine' [ 358s] libtool: install: /bin/install -c .libs/ise-engine-default.so /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/lib64/scim-1.0/1.4.0/IMEngine/ise-engine-default.so [ 358s] libtool: install: /bin/install -c .libs/ise-engine-default.lai /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/lib64/scim-1.0/1.4.0/IMEngine/ise-engine-default.la [ 358s] libtool: warning: remember to run 'libtool --finish /usr/lib64/scim-1.0/1.4.0/IMEngine' [ 358s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/src' [ 358s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/src' [ 358s] Making install in data [ 358s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/data' [ 358s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/data' [ 358s] make[2]: Nothing to be done for 'install-exec-am'. [ 358s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/scim/icons' [ 358s] /bin/install -c -m 644 isf-default.png '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/scim/icons' [ 358s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/data' [ 358s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/data' [ 358s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 358s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 358s] make[2]: Nothing to be done for 'install-exec-am'. [ 358s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/packages' [ 358s] /bin/install -c -m 644 ise-engine-default.xml '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/packages' [ 358s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 358s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11' [ 358s] + rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/info/dir [ 358s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 -regex '.*\.la$' [ 358s] + xargs rm -f -- [ 358s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 -regex '.*\.a$' [ 358s] + xargs rm -f -- [ 358s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 1.0.11-1 --unique-debug-src-base ise-engine-default-1.0.11-1.riscv64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11 [ 359s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/lib64/scim-1.0/1.4.0/IMEngine/ise-engine-default.so [ 359s] 36 blocks [ 359s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/ise-engine-default-debuginfo.manifest [ 359s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/ise-engine-default-debugsource.manifest [ 359s] + /usr/lib/rpm/check-buildroot [ 359s] + /usr/lib/rpm//brp-compress [ 359s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 359s] + /usr/lib/rpm/brp-python-hardlink [ 359s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 [ 359s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/ise-engine-default-1.0.11/isu.list [ 359s] ~/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 ~/rpmbuild/BUILD/ise-engine-default-1.0.11 [ 359s] ~/rpmbuild/BUILD/ise-engine-default-1.0.11 [ 359s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 360s] Processing files: ise-engine-default-1.0.11-1.riscv64 [ 360s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 360s] cmVxdWVzdD4KPGFzc2lnbj4KICAgIDxmaWxlc3lzdGVtIHBhdGg9Ii91c3IvYmlu [ 360s] LyoiIGV4ZWNfbGFiZWw9Im5vbmUiIC8+CjwvYXNzaWduPgo8L21hbmlmZXN0Pgo= [ 360s] [ 360s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.e16txe [ 360s] + umask 022 [ 360s] + cd /home/abuild/rpmbuild/BUILD [ 360s] + cd ise-engine-default-1.0.11 [ 360s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/licenses/ise-engine-default [ 360s] + export LC_ALL=C [ 360s] + LC_ALL=C [ 360s] + export LICENSEDIR [ 360s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/licenses/ise-engine-default [ 360s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64/usr/share/licenses/ise-engine-default [ 360s] + exit 0 [ 360s] Provides: ise-engine-default = 1.0.11-1 ise-engine-default(riscv-64) = 1.0.11-1 [ 360s] Requires(interp): /bin/sh /bin/sh [ 360s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 360s] Requires(post): /bin/sh [ 360s] Requires(postun): /bin/sh [ 360s] Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libisf-control.so.8()(64bit) libm.so.6()(64bit) libscim-1.0.so.8()(64bit) libscim_imengine.so.8()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.9)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) libstdc++.so.6(GLIBCXX_3.4.32)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) [ 360s] Processing files: ise-engine-default-debugsource-1.0.11-1.riscv64 [ 360s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 360s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 360s] [ 361s] Provides: ise-engine-default-debugsource = 1.0.11-1 ise-engine-default-debugsource(riscv-64) = 1.0.11-1 [ 361s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 361s] Processing files: ise-engine-default-debuginfo-1.0.11-1.riscv64 [ 361s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 361s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 361s] [ 361s] Provides: ise-engine-default-debuginfo = 1.0.11-1 ise-engine-default-debuginfo(riscv-64) = 1.0.11-1 [ 361s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 361s] Recommends: ise-engine-default-debugsource(riscv-64) = 1.0.11-1 [ 361s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 [ 361s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/ise-engine-default-1.0.11-1.riscv64.rpm [ 361s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/ise-engine-default-debugsource-1.0.11-1.riscv64.rpm [ 361s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/ise-engine-default-debuginfo-1.0.11-1.riscv64.rpm [ 361s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.oDyeGS [ 361s] + umask 022 [ 361s] + cd /home/abuild/rpmbuild/BUILD [ 361s] + cd ise-engine-default-1.0.11 [ 361s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-1.0.11-1.riscv64 [ 361s] + exit 0 [ 361s] ... checking for files with abuild user/group [ 361s] ... creating baselibs [ 363s] [ 363s] ip-192-168-56-50 finished "build ise-engine-default.spec" at Mon Feb 10 09:24:09 UTC 2025. [ 363s]