# packages

pkgId: b53d660d2a4dea54c59c354f2ae4527aa2d67bdafc5bdfbc757fc72927cc0af6
name: perl-Class-Inspector
arch: armv7l
version: 1.36
epoch: 0
release: 0
summary: Get information about a class and its structure
url: https://metacpan.org/pod/Class::Inspector
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Class-Inspector-1.36-0.src.rpm
location_href: armv7l/perl-Class-Inspector-1.36-0.armv7l.rpm
checksum_type: sha256
description:
  Class::Inspector allows you to get information about a loaded class.
  Most or all of this information can be found in other ways,
  but they aren't always very friendly, and usually involve a relatively
  high level of Perl wizardry, or strange and unusual looking code.
  Class::Inspector attempts to provide an easier,
  more friendly interface to this information.


pkgId: bc0b3b5ca399bdb602cf34cb2eb8ab85a29556c9b46ae5056ab0dd72406b9b36
name: perl-Class-Singleton
arch: armv7l
version: 1.6
epoch: 0
release: 0
summary: Implementation of a "Singleton" class
url: https://metacpan.org/pod/Class::Singleton
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Class-Singleton-1.6-0.src.rpm
location_href: armv7l/perl-Class-Singleton-1.6-0.armv7l.rpm
checksum_type: sha256
description:
  This is the Class::Singleton module. A Singleton describes
  an object class that can have only one instance in any system.
  An example of a Singleton might be a print spooler or
  system registry. This module implements a Singleton class
  from which other classes can be derived. By itself,
  the Class::Singleton module does very little other than manage
  the instantiation of a single object. In deriving a class
  from Class::Singleton, your module will inherit the Singleton
  instantiation method and can implement whatever specific
  functionality is required.

  For a description and discussion of the Singleton class,
  see "Design Patterns", Gamma et al, Addison-Wesley, 1995, ISBN 0-201-63361-2.


pkgId: f05e05229db25c7ddcf8075346da63d36e04149e86d854ecfb5d7e5561e3662c
name: perl-DateTime
arch: armv7l
version: 1.65
epoch: 0
release: 0
summary: A date and time object for Perl
url: https://metacpan.org/pod/DateTime
rpm_license: Artistic License 2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-DateTime-1.65-0.src.rpm
location_href: armv7l/perl-DateTime-1.65-0.armv7l.rpm
checksum_type: sha256
description:
  DateTime is a class for the representation of date/time
  combinations, and is part of the Perl DateTime project.
  It represents the Gregorian calendar, extended backwards
  in time before its creation (in 1582). This is sometimes
  known as the "proleptic Gregorian calendar". In this calendar,
  the first day of the calendar (the epoch),
  is the first day of year 1, which corresponds to the date which
  was (incorrectly) believed to be the birth of Jesus Christ.
  The calendar represented does have a year 0, and in that way differs
  from how dates are often written using "BCE/CE" or "BC/AD".
  For infinite datetimes, please see the DateTime::Infinite module.


pkgId: c25350b7c749463211aafb6574d3c5b36581ad136c5d09dbde4a2f5437e135a0
name: perl-DateTime-Locale
arch: armv7l
version: 1.44
epoch: 0
release: 1
summary: Class for locale objects instantiated from pre-defined data
url: https://metacpan.org/pod/DateTime::Locale::FromData
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-DateTime-Locale-1.44-1.src.rpm
location_href: armv7l/perl-DateTime-Locale-1.44-1.armv7l.rpm
checksum_type: sha256
description:
  This class is used to represent locales instantiated
  from the data in the DateTime::Locale::Data module.


pkgId: b7f587583b53ac52d42e71e3cadfaecc83a20440ef3506e10f74d20342d301e4
name: perl-DateTime-TimeZone
arch: armv7l
version: 2.63
epoch: 0
release: 1
summary: Time zone object base class and factory
url: https://metacpan.org/pod/DateTime::TimeZone
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-DateTime-TimeZone-2.63-1.src.rpm
location_href: armv7l/perl-DateTime-TimeZone-2.63-1.armv7l.rpm
checksum_type: sha256
description:
  This class is the base class for all time zone objects.
  A time zone is represented internally as a set of observances,
  each of which describes the offset from GMT for a given time period.

  Note that without the DateTime module, this module does not do much.
  It's primary interface is through a DateTime object,
  and most users will not need to directly use DateTime::TimeZone methods.


pkgId: 64dd8d5e3b8cffd70fa85297d47a47421f5344de79785db369488a0aa7ee3839
name: perl-Devel-StackTrace
arch: armv7l
version: 2.05
epoch: 0
release: 1
summary: An object representing a stack trace
url: https://metacpan.org/pod/Devel::StackTrace
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Devel-StackTrace-2.05-1.src.rpm
location_href: armv7l/perl-Devel-StackTrace-2.05-1.armv7l.rpm
checksum_type: sha256
description:
  The Devel::StackTrace module contains two classes,
  Devel::StackTrace and Devel::StackTrace::Frame. These
  objects encapsulate the information that can
  retrieved via Perl's caller function, as well as
  providing a simple interface to this data.

  The Devel::StackTrace object contains a set of
  Devel::StackTrace::Frame objects, one for each
  level of the stack. The frames contain all the
  data available from caller.
  This code was created to support my
  Exception::Class::Base class (part of
  Exception::Class) but may be useful in other contexts.


pkgId: 1414bd804687c1c312f1d66d610871e234cbbe1e05ba7c440fa652b318128707
name: perl-Error
arch: armv7l
version: 0.17029
epoch: 0
release: 0
summary: Error/exception handling in an OO-ish way
url: http://search.cpan.org/dist/Error/
rpm_license: GPL-1.0 or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-Error-0.17029-0.src.rpm
location_href: armv7l/perl-Error-0.17029-0.armv7l.rpm
checksum_type: sha256
description:
  The 'Error' package provides two interfaces. Firstly 'Error' provides a
  procedural interface to exception handling. Secondly 'Error' is a base
  class for errors/exceptions that can either be thrown, for subsequent
  catch, or can simply be recorded.

  Errors in the class 'Error' should not be thrown directly, but the user
  should throw errors from a sub-class of 'Error'.


pkgId: 01469875ef33488ba8e64e3d000d94bb89fb6f01803796cfb7738cee5b29c479
name: perl-Eval-Closure
arch: armv7l
version: 0.14
epoch: 0
release: 1
summary: safely and cleanly create closures via string eval
url: https://metacpan.org/pod/Eval::Closure
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Eval-Closure-0.14-1.src.rpm
location_href: armv7l/perl-Eval-Closure-0.14-1.armv7l.rpm
checksum_type: sha256
description:
  String eval is often used for dynamic code generation.
  For instance, Moose uses it heavily, to generate inlined
  versions of accessors and constructors, which speeds code up
  at runtime by a significant amount. String eval is not without
  its issues however - it's difficult to control the scope it's
  used in (which determines which variables are in scope inside the eval),
  and it's easy to miss compilation errors, since eval catches
  them and sticks them in $@ instead.

  This module attempts to solve these problems. It provides an
  eval_closure function, which evals a string in a clean environment,
  other than a fixed list of specified variables. Compilation errors
  are rethrown automatically.


pkgId: 04cc084a1c7d1426e0f4dfdfa8cf50d6c270a1f9513cfab32a40352e4f29f01e
name: perl-Exception-Class
arch: armv7l
version: 1.45
epoch: 0
release: 1
summary: A module that allows you to declare real exception classes in Perl
url: https://metacpan.org/pod/Exception::Class
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Exception-Class-1.45-1.src.rpm
location_href: armv7l/perl-Exception-Class-1.45-1.armv7l.rpm
checksum_type: sha256
description:
  RECOMMENDATION 1: If you are writing modern Perl
  code with Moose or Moo I highly recommend using Throwable
  instead of this module.
  RECOMMENDATION 2: Whether or not you use Throwable,
  you should use Try::Tiny.
  Exception::Class allows you to declare exception
  hierarchies in your modules in a "Java-esque" manner.
  It features a simple interface allowing programmers to 'declare'
  1exception classes at compile time. It also has a base exception
  class, Exception::Class::Base, that can be easily extended.
  It is designed to make structured exception handling simpler
  and better by encouraging people to use hierarchies of exceptions
  in their applications, as opposed to a single catch-all exception class.
  This module does not implement any try/catch syntax. Please see the
  "OTHER EXCEPTION MODULES (try/catch syntax)" section for more
  information on how to get this syntax.
  You will also want to look at the documentation for
  Exception::Class::Base, which is the default base class for
  all exception objects created by this module.


pkgId: c2510e8464e7789601affc8276110f8b9a55c4f27aa5f89efc4960d6b614d522
name: perl-FFI-CheckLib
arch: armv7l
version: 0.31
epoch: 0
release: 0
summary: Check that a library is available for FFI
url: https://metacpan.org/release/FFI-CheckLib
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-FFI-CheckLib-0.31-0.src.rpm
location_href: armv7l/perl-FFI-CheckLib-0.31-0.armv7l.rpm
checksum_type: sha256
description:
  This module checks whether a particular dynamic library is available for
  FFI to use. It is modeled heavily on Devel::CheckLib, but will find dynamic
  libraries even when development packages are not installed. It also
  provides a find_lib function that will return the full path to the found
  dynamic library, which can be feed directly into FFI::Platypus or another
  FFI system.


pkgId: c7aa0ab6414798fe0968bfb5f8471cebc5f76e2fd5e6cf7dc28168db1523ee7d
name: perl-File-ShareDir
arch: armv7l
version: 1.118
epoch: 0
release: 1
summary: Locate per-dist and per-module shared files
url: https://metacpan.org/pod/File::ShareDir
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-File-ShareDir-1.118-1.src.rpm
location_href: armv7l/perl-File-ShareDir-1.118-1.armv7l.rpm
checksum_type: sha256
description:
  The intent of File::ShareDir is to provide a companion to Class::Inspector
  and File::HomeDir, modules that take a process that is well-known
  by advanced Perl developers but gets a little tricky,
  and make it more available to the larger Perl community.

  Quite often you want or need your Perl module (CPAN or otherwise)
  to have access to a large amount of read-only data that is stored
  on the file-system at run-time.

  On a linux-like system, this would be in a place such as /usr/share,
  however Perl runs on a wide variety of different systems,
  and so the use of any one location is unreliable.

  Perl provides a little-known method for doing this,
  but almost nobody is aware that it exists. As a result, module authors
  often go through some very strange ways to make the data available to their code.

  The most common of these is to dump the data out to an enormous
  Perl data structure and save it into the module itself.
  The result are enormous multi-megabyte .pm files
  that chew up a lot of memory needlessly.

  Another method is to put the data "file" after the __DATA__
  compiler tag and limit yourself to access as a filehandle.

  The problem to solve is really quite simple.

   1. Write the data files to the system at install time.
   2. Know where you put them at run-time.

  Perl's install system creates an "auto" directory
  for both every distribution and for every module file.

  These are used by a couple of different auto-loading systems
  to store code fragments generated at install time,
  and various other modules written by the Perl "ancient masters".

  But the same mechanism is available to any dist or module to store any sort of data.


pkgId: bfce29aadd363e08edf0bf2e8275f89d995e1f314cf3df044f302a0363b4d26b
name: perl-File-ShareDir-Install
arch: armv7l
version: 0.14
epoch: 0
release: 1
summary: Install shared files
url: https://metacpan.org/pod/File::ShareDir::Install
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-File-ShareDir-Install-0.14-1.src.rpm
location_href: armv7l/perl-File-ShareDir-Install-0.14-1.armv7l.rpm
checksum_type: sha256
description:
  File::ShareDir::Install allows you to install read-only data
  files from a distribution. It is a companion module to File::ShareDir,
  which allows you to locate these files after installation.

  It is a port of Module::Install::Share to ExtUtils::MakeMaker
  with the improvement of only installing the files you want;
  .svn, .git and other source-control junk will be ignored.

  Please note that this module installs read-only data files;
  empty directories will be ignored.


pkgId: 52d28a4883a289f4ef3d2e30b2e7ceaf763856b0213a43913579f24341dd8871
name: perl-File-Which
arch: armv7l
version: 1.27
epoch: 0
release: 0
summary: Perl implementation of the which utility as an API
url: https://metacpan.org/release/File-Which
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-File-Which-1.27-0.src.rpm
location_href: armv7l/perl-File-Which-1.27-0.armv7l.rpm
checksum_type: sha256
description:
  File::Which finds the full or relative paths to executable programs on the
  system. This is normally the function of 'which' utility. 'which' is
  typically implemented as either a program or a built in shell command. On
  some platforms, such as Microsoft Windows it is not provided as part of the
  core operating system. This module provides a consistent API to this
  functionality regardless of the underlying platform.

  The focus of this module is correctness and portability. As a consequence
  platforms where the current directory is implicitly part of the search path
  such as Microsoft Windows will find executables in the current directory,
  whereas on platforms such as UNIX where this is not the case executables in
  the current directory will only be found if the current directory is
  explicitly added to the path.

  If you need a portable 'which' on the command line in an environment that
  does not provide it, install App::pwhich which provides a command line
  interface to this API.


pkgId: a8d1316d3e6215626304653268e5a889aedcad7aeeb6da888df1b7f2d9f144e5
name: perl-File-chdir
arch: armv7l
version: 0.1011
epoch: 0
release: 0
summary: More sensible way to change directories
url: https://metacpan.org/release/File-chdir
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-File-chdir-0.1011-0.src.rpm
location_href: armv7l/perl-File-chdir-0.1011-0.armv7l.rpm
checksum_type: sha256
description:
  Perl's 'chdir()' has the unfortunate problem of being very, very, very
  global. If any part of your program calls 'chdir()' or if any library you
  use calls 'chdir()', it changes the current working directory for the
  *whole* program.

  This sucks.

  File::chdir gives you an alternative, '$CWD' and '@CWD'. These two
  variables combine all the power of 'chdir()', File::Spec and Cwd.


pkgId: 750da80bf448a439ee741e2e09481501bac77719b50bad1913a79a4b230feebf
name: perl-JSON-PP
arch: armv7l
version: 4.16
epoch: 0
release: 1
summary: JSON::PP - JSON::XS compatible pure-Perl module.
url: https://metacpan.org/pod/JSON::PP
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-JSON-PP-4.16-1.src.rpm
location_href: armv7l/perl-JSON-PP-4.16-1.armv7l.rpm
checksum_type: sha256
description:
  JSON::PP is a pure perl JSON decoder/encoder, and (almost) compatible
  to much faster JSON::XS written by Marc Lehmann in C.
  JSON::PP works as a fallback module when you use JSON module
  without having installed JSON::XS.

  Because of this fallback feature of JSON.pm,
  JSON::PP tries not to be more JavaScript-friendly than JSON::XS
  (i.e. not to escape extra characters such as U+2028 and U+2029, etc),
  in order for you not to lose such JavaScript-friendliness silently
  when you use JSON.pm and install JSON::XS for speed or by accident.
  If you need JavaScript-friendly RFC7159-compliant pure perl module,
  try JSON::Tiny, which is derived from Mojolicious web framework and
  is also smaller and faster than JSON::PP.

  JSON::PP has been in the Perl core since Perl 5.14, mainly
  for CPAN toolchain modules to parse META.json.


pkgId: 7acd803830e9459b1a19f7b2b667303d1acc1cb94ec6f383f4e93c36ebc9094e
name: perl-MRO-Compat
arch: armv7l
version: 0.15
epoch: 0
release: 1
summary: Routines for manipulating stashes
url: https://metacpan.org/pod/MRO::Compat
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-MRO-Compat-0.15-1.src.rpm
location_href: armv7l/perl-MRO-Compat-0.15-1.armv7l.rpm
checksum_type: sha256
description:
  The "mro" namespace provides several utilities for dealing
  with method resolution order and method caching in general
  in Perl 5.9.5 and higher.
  This module provides those interfaces for earlier
  versions of Perl (back to 5.6.0 anyways).

  It is a harmless no-op to use this module on 5.9.5+.
  That is to say, code which properly uses MRO::Compat
  will work unmodified on both older Perls and 5.9.5+.

  If you're writing a piece of software that would like
  to use the parts of 5.9.5+'s mro:: interfaces that are
  supported here, and you want compatibility
  with older Perls, this is the module for you.

  Some parts of this code will work better and/or faster
  with Class::C3::XS installed (which is an optional
  prereq of Class::C3, which is in turn a prereq of
  this package), but it's not a requirement.

  This module never exports any functions.
  All calls must be fully qualified with the mro:: prefix.

  The interface documentation here serves only as a quick
  reference of what the function basically does, and what
  differences between MRO::Compat and 5.9.5+ one should look out for.
  The main docs in 5.9.5's mro are the real interface docs,
  and contain a lot of other useful information.


pkgId: b1dac969a3af0a46ead5bf8a20c7672d88f59107b7542e79067d004fd0f84b2e
name: perl-Module-Runtime
arch: armv7l
version: 0.016
epoch: 0
release: 1
summary: runtime module handling
url: https://metacpan.org/pod/Module::Runtime
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Module-Runtime-0.016-1.src.rpm
location_href: armv7l/perl-Module-Runtime-0.016-1.armv7l.rpm
checksum_type: sha256
description:
  The functions exported by this module deal with runtime handling of Perl modules,
  which are normally handled at compile time. This module avoids using any other modules,
  so that it can be used in low-level infrastructureb.

  The parts of this module that work with module names apply the same syntax
  that is used for barewords in Perl source. In principle this syntax can
  vary between versions of Perl, and this module applies the syntax of
  the Perl on which it is running. In practice the usable syntax hasn't changed yet.
  There's some intent for Unicode module names to be supported in the future,
  but this hasn't yet amounted to any consistent facility.

  The functions of this module whose purpose is to load modules include workarounds
  for three old Perl core bugs regarding require. These workarounds are applied on any Perl version
  where the bugs exist, except for a case where one of the bugs cannot be adequately worked around in pure Perl.


pkgId: 38258128e6103979cc9349229a2504b9bf2fee100e068b2c833269e7ca863040
name: perl-Net-DBus
arch: armv7l
version: 1.2.0
epoch: 0
release: 1
summary: Perl extension for the DBus message system
url: http://search.cpan.org/dist/Net-DBus/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Net-DBus-1.2.0-1.src.rpm
location_href: armv7l/perl-Net-DBus-1.2.0-1.armv7l.rpm
checksum_type: sha256
description:
  Net::DBus provides a Perl API for the DBus message system. The DBus Perl
  interface is currently operating against the 0.32 development version of
  DBus, but should work with later versions too, providing the API changes
  have not been too drastic.

  Users of this package are either typically, service providers in which case
  the the Net::DBus::Service manpage and the Net::DBus::Object manpage
  modules are of most relevance, or are client consumers, in which case the
  Net::DBus::RemoteService manpage and the Net::DBus::RemoteObject manpage
  are of most relevance.


pkgId: bd54d2b4c81b3fee71179f960360a00d0c74447005dad99b52cfc02fe10e0bf3
name: perl-Package-Stash
arch: armv7l
version: 0.40
epoch: 0
release: 1
summary: Routines for manipulating stashes
url: https://metacpan.org/pod/Package::Stash
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Package-Stash-0.40-1.src.rpm
location_href: armv7l/perl-Package-Stash-0.40-1.armv7l.rpm
checksum_type: sha256
description:
  Manipulating stashes (Perl's symbol tables) is occasionally
  necessary, but incredibly messy, and easy to get wrong.
  This module hides all of that behind a simple API.

  NOTE: Most methods in this class require a variable specification
  that includes a sigil. If this sigil is absent, it is assumed
  to represent the IO slot.

  Due to limitations in the typeglob API available to perl code,
  and to typeglob manipulation in perl being quite slow, this module
  provides two implementations - one in pure perl, and one using XS.
  The XS implementation is to be preferred for most usages; the pure
  perl one is provided for cases where XS modules are not a possibility.
  The current implementation in use can be set by setting
  $ENV{PACKAGE_STASH_IMPLEMENTATION} or $Package::Stash::IMPLEMENTATION
  before loading Package::Stash (with the environment variable
  taking precedence), otherwise, it will use the XS implementation
  if possible, falling back to the pure perl one.


pkgId: 4a9dd133dbacf8ba7cb6fc8b3f60590f347816e7a978f6067f4d23d6f425ef60
name: perl-Params-ValidationCompiler
arch: armv7l
version: 0.31
epoch: 0
release: 1
summary: Build an optimized subroutine parameter validator once, use it forever
url: https://metacpan.org/pod/Params::ValidationCompiler
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Params-ValidationCompiler-0.31-1.src.rpm
location_href: armv7l/perl-Params-ValidationCompiler-0.31-1.armv7l.rpm
checksum_type: sha256
description:
  This module creates a customized, highly efficient
  parameter checking subroutine. It can handle named
  or positional parameters, and can return the
  parameters as key/value pairs or a list of values.

  In addition to type checks, it also supports
  parameter defaults, optional parameters, and
  extra "slurpy" parameters.


pkgId: 4f845230234d01a07134fe2316aac9a038ae14a2ffe3727d703582fc15283869
name: perl-Path-Tiny
arch: armv7l
version: 0.146
epoch: 0
release: 0
summary: File path utility
url: https://metacpan.org/release/Path-Tiny
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Path-Tiny-0.146-0.src.rpm
location_href: armv7l/perl-Path-Tiny-0.146-0.armv7l.rpm
checksum_type: sha256
description:
  This module provides a small, fast utility for working with file paths. It
  is friendlier to use than File::Spec and provides easy access to functions
  from several other core file handling modules. It aims to be smaller and
  faster than many alternatives on CPAN, while helping people do many common
  things in consistent and less error-prone ways.

  Path::Tiny does not try to work for anything except Unix-like and Win32
  platforms. Even then, it might break if you try something particularly
  obscure or tortuous. (Quick! What does this mean:
  '///../../..//./././a//b/.././c/././'? And how does it differ on Win32?)

  All paths are forced to have Unix-style forward slashes. Stringifying the
  object gives you back the path (after some clean up).

  File input/output methods 'flock' handles before reading or writing, as
  appropriate (if supported by the platform and/or filesystem).

  The '*_utf8' methods ('slurp_utf8', 'lines_utf8', etc.) operate in raw
  mode. On Windows, that means they will not have CRLF translation from the
  ':crlf' IO layer. Installing Unicode::UTF8 0.58 or later will speed up
  '*_utf8' situations in many cases and is highly recommended. Alternatively,
  installing PerlIO::utf8_strict 0.003 or later will be used in place of the
  default ':encoding(UTF-8)'.

  This module depends heavily on PerlIO layers for correct operation and thus
  requires Perl 5.008001 or later.


pkgId: 772e1387ef49a941fb1f5691c6ac026c2e230d6ec16c46b187d360ff5b6ad111
name: perl-Specio
arch: armv7l
version: 0.48
epoch: 0
release: 1
summary: Base class for type libraries
url: https://metacpan.org/pod/Specio::Exporter
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Specio-0.48-1.src.rpm
location_href: armv7l/perl-Specio-0.48-1.armv7l.rpm
checksum_type: sha256
description:
  Inheriting from this package makes your package a type exporter.
  By default, types defined in a package are never visible outside
  of the package. When you inherit from this package, all the types
  you define internally become available via exports.

  The exported types are available through the importing package's t subroutine.

  By default, types your package imports are not re-exported:

   package MyApp::Type::Library;

   use parent 'Specio::Exporter';

   use Specio::Declare;
   use Specio::Library::Builtins;

  In this case, the types provided by Specio::Library::Builtins are not
  exported to packages which use MyApp::Type::Library.

  You can explicitly ask for types to be re-exported:

    package MyApp::Type::Library;

    use parent 'Specio::Exporter';

    use Specio::Declare;
    use Specio::Library::Builtins -reexport;

  In this case, packages which use MyApp::Type::Library will get
  all the types from Specio::Library::Builtins as well as any
  types defined in MyApp::Type::Library.


pkgId: 0a925fb94c54d679071b6d104458bf220821dc58caa6799dd259f4b8245c0c44
name: perl-Sub-Exporter-Progressive
arch: armv7l
version: 0.001013
epoch: 0
release: 1
summary: Only use Sub::Exporter if you need it
url: https://metacpan.org/pod/Sub::Exporter::Progressive
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Sub-Exporter-Progressive-0.001013-1.src.rpm
location_href: armv7l/perl-Sub-Exporter-Progressive-0.001013-1.armv7l.rpm
checksum_type: sha256
description:
  Sub::Exporter is an incredibly powerful module, but with that power
  comes great responsibility, er- as well as some runtime penalties.
  This module is a Sub::Exporter wrapper that will let your users just
  use Exporter if all they are doing is picking exports, but use Sub::Exporter
  if your users try to use Sub::Exporter's more advanced features,
  like renaming exports, if they try to use them.

  Note that this module will export @EXPORT, @EXPORT_OK and %EXPORT_TAGS
  package variables for Exporter to work. Additionally, if your package
  uses advanced Sub::Exporter features like currying, this module will
  only ever use Sub::Exporter, so you might as well use it directly.


pkgId: 958ff04bc7089555748374feaff4c7ff87203e323ea776c61027b86877c23627
name: perl-Sub-Identify
arch: armv7l
version: 0.14
epoch: 0
release: 1
summary: Retrieve names of code references
url: https://metacpan.org/pod/Sub::Identify
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Sub-Identify-0.14-1.src.rpm
location_href: armv7l/perl-Sub-Identify-0.14-1.armv7l.rpm
checksum_type: sha256
description:
  Sub::Identify allows you to retrieve the real name of code references.
  It provides six functions, all of them taking a code reference.
  sub_name returns the name of the code reference passed as an argument
  (or __ANON__ if it's an anonymous code reference), stash_name
  returns its package, and sub_fullname returns the concatenation of the two.

  get_code_info
  returns a list of two elements, the package and the subroutine name
  (in case of you want both and are worried by the speed.)

  In case of subroutine aliasing, those functions always return the original name.
  get_code_location returns a two-element list containing the file name
  and the line number where the subroutine has been defined.

  is_sub_constant returns a boolean value indicating whether
  the subroutine is a constant or not.


pkgId: 09a879f5bf22154c13e2362e39dea334fa93fa40217ae678b43ee28f67f19866
name: perl-Switch
arch: noarch
version: 2.17
epoch: 0
release: 1
summary: A switch statement for Perl
url: http://search.cpan.org/dist/Switch/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Switch-2.17-1.src.rpm
location_href: noarch/perl-Switch-2.17-1.noarch.rpm
checksum_type: sha256
description:
  The Switch.pm module implements a generalized case mechanism that covers
  most (but not all) of the numerous possible combinations of switch and case
  values described above.

  The module augments the standard Perl syntax with two new control
  statements: 'switch' and 'case'. The 'switch' statement takes a single
  scalar argument of any type, specified in parentheses. 'switch' stores this
  value as the current switch value in a (localized) control variable. The
  value is followed by a block which may contain one or more Perl statements
  (including the 'case' statement described below). The block is
  unconditionally executed once the switch value has been cached.


pkgId: 7f10a95e2a30c869bd0a5cf6b82c26ebf7dba316c26a789dd8d50cf2b1d9c37b
name: perl-Term-Table
arch: armv7l
version: 0.023
epoch: 0
release: 0
summary: Format a header and rows into a table
url: https://metacpan.org/release/Term-Table
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Term-Table-0.023-0.src.rpm
location_href: armv7l/perl-Term-Table-0.023-0.armv7l.rpm
checksum_type: sha256
description:
  This is used by some failing tests to provide diagnostics about what has
  gone wrong. This module is able to format rows of data into tables.


pkgId: 07b95e627410f15c54a40fc83e3b8fa8060286b126e014cbc42b3eb80ef6908e
name: perl-Test2-Suite
arch: armv7l
version: 0.000163
epoch: 0
release: 0
summary: Distribution with a rich set of tools built upon the Test2 framework
url: https://metacpan.org/release/Test2-Suite
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Test2-Suite-0.000163-0.src.rpm
location_href: armv7l/perl-Test2-Suite-0.000163-0.armv7l.rpm
checksum_type: sha256
description:
  Rich set of tools, plugins, bundles, etc built upon the Test2 testing
  library. If you are interested in writing tests, this is the distribution
  for you.


pkgId: af7bc0857858b55fd06affddd4df3405ae33ee39fc8da45dc5ed72c0d598c664
name: perl-Try-Tiny
arch: armv7l
version: 0.32
epoch: 0
release: 1
summary: Minimal try/catch with proper preservation of $@
url: https://metacpan.org/pod/Try::Tiny
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Try-Tiny-0.32-1.src.rpm
location_href: armv7l/perl-Try-Tiny-0.32-1.armv7l.rpm
checksum_type: sha256
description:
  This module provides bare bones try/catch/finally statements that are
  designed to minimize common mistakes with eval blocks, and NOTHING else.

  This is unlike TryCatch which provides a nice syntax and avoids adding
  another call stack layer, and supports calling return from the try block
  to return from the parent subroutine. These extra features come
  at a cost of a few dependencies, namely Devel::Declare and Scope::Upper
  which are occasionally problematic, and the additional catch filtering
  uses Moose type constraints which may not be desirable either.

  The main focus of this module is to provide simple and reliable error
  handling for those having a hard time installing TryCatch, but who still
  want to write correct eval blocks without 5 lines of boilerplate each time.

  It's designed to work as correctly as possible in light of the various
  pathological edge cases (see "BACKGROUND") and to be compatible with
  any style of error values (simple strings, references, objects, overloaded
  objects, etc).

  If the try block dies, it returns the value of the last statement executed
  in the catch block, if there is one. Otherwise, it returns undef in scalar
  context or the empty list in list context. The following examples
  all assign "bar" to $x:

  my $x = try { die "foo" } catch { "bar" };
  my $x = try { die "foo" } || "bar";
  my $x = (try { die "foo" }) // "bar";

   my $x = eval { die "foo" } || "bar";
   You can add finally blocks, yielding the following:

   my $x;
   try { die 'foo' } finally { $x = 'bar' };
   try { die 'foo' } catch { warn "Got a die: $_" } finally { $x = 'bar' };

   finally blocks are always executed making them suitable for cleanup code
   which cannot be handled using local. You can add as many finally blocks
   to a given try block as you like.

   Note that adding a finally block without a preceding catch block suppresses
   any errors. This behaviour is consistent with using a standalone eval,
   but it is not consistent with try/finally patterns found in other programming
   languages, such as Java, Python, Javascript or C#. If you learned
   the try/finally pattern from one of these languages, watch out for this.


pkgId: 4c06500a9d24997db312c2d1cba7ff3171b1098699e75f5ce42d3af7223b49b1
name: perl-Variable-Magic
arch: armv7l
version: 0.64
epoch: 0
release: 1
summary: Associate user-defined magic to variables from Perl.
url: https://metacpan.org/pod/Variable::Magic
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Variable-Magic-0.64-1.src.rpm
location_href: armv7l/perl-Variable-Magic-0.64-1.armv7l.rpm
checksum_type: sha256
description:
  Magic is Perl's way of enhancing variables. This mechanism
  lets the user add extra data to any variable and hook
  syntactical operations (such as access, assignment or destruction)
  that can be applied to it. With this module, you can add
  your own magic to any variable without having to write a single line of XS.

  You'll realize that these magic variables look a lot like tied variables.
  It is not surprising, as tied variables are implemented as a special
  kind of magic, just like any 'irregular' Perl variable : scalars like $!,
  $( or $^W, the %ENV and %SIG hashes, the @ISA array, vec() and substr()
  lvalues, threads::shared variables... They all share the same underlying
  C API, and this module gives you direct access to it.


pkgId: ff501f9f90d8157f2b3750095d8bbf28f03460db0f1407ffd2a4c2fed5664819
name: perl-XML-LibXML
arch: armv7l
version: 2.0210
epoch: 0
release: 0
summary: Perl Binding for libxml2
url: http://search.cpan.org/dist/XML-LibXML/
rpm_license: Artistic License ..
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-LibXML-2.0210-0.src.rpm
location_href: armv7l/perl-XML-LibXML-2.0210-0.armv7l.rpm
checksum_type: sha256
description:
  This module implements a Perl interface to the Gnome libxml2 library which
  provides interfaces for parsing and manipulating XML files. This module allows
  Perl programmers to make use of the highly capable validating XML parser and
  the high performance DOM implementation.

  Authors:
  	Matt Sergeant, Christian Glahn, Petr Pajas


pkgId: f758ca683785965e1594bccdecaacc5acca2912c7b1aa3e44ce9db3e16271ecf
name: perl-XML-NamespaceSupport
arch: armv7l
version: 1.12
epoch: 0
release: 0
summary: Simple Generic Namespace Processor
url: http://search.cpan.org/dist/XML-NamespaceSupport/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-NamespaceSupport-1.12-0.src.rpm
location_href: armv7l/perl-XML-NamespaceSupport-1.12-0.armv7l.rpm
checksum_type: sha256
description:
  This module offers a simple to process namespaced XML names (unames) from
  within any application that may need them. It also helps maintain a prefix
  to namespace URI map, and provides a number of basic checks.

  The model for this module is SAX2's NamespaceSupport class, readable at
  http://www.saxproject.org/namespaces.html It adds a few perlisations where
  we thought it appropriate.


pkgId: 51949b2d3483c16f1c2dcec64f6e4f7fbeff4e2c5687e325ab044bb0d94cba01
name: perl-XML-SAX
arch: armv7l
version: 1.02
epoch: 0
release: 6
summary: XML::SAX Perl Module
url: http://www.cpan.org/modules/by-module/XML/
rpm_license: Artistic License ..
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-SAX-1.02-6.src.rpm
location_href: armv7l/perl-XML-SAX-1.02-6.armv7l.rpm
checksum_type: sha256
description:
  XML::SAX consists of several framework classes for using and building
  Perl SAX2 XML parsers, filters, and drivers. It is designed around the
  need to be able to "plug in" different SAX parsers to an application
  without requiring programmer intervention. Those of you familiar with
  the DBI will be right at home. Some of the designs come from the Java
  JAXP specification (SAX part), only without the javaness.


pkgId: a29bf17d345feacef5ae07c94de05f3fad4651495a9ae41b7f41205e7f4e82c6
name: perl-XML-SAX-Base
arch: armv7l
version: 1.09
epoch: 0
release: 0
summary: Base class SAX Drivers and Filters
url: http://search.cpan.org/dist/XML-SAX-Base/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-SAX-Base-1.09-0.src.rpm
location_href: armv7l/perl-XML-SAX-Base-1.09-0.armv7l.rpm
checksum_type: sha256
description:
  This module has a very simple task - to be a base class for PerlSAX drivers
  and filters. It's default behaviour is to pass the input directly to the
  output unchanged. It can be useful to use this module as a base class so
  you don't have to, for example, implement the characters() callback.

  The main advantages that it provides are easy dispatching of events the
  right way (ie it takes care for you of checking that the handler has
  implemented that method, or has defined an AUTOLOAD), and the guarantee
  that filters will pass along events that they aren't implementing to
  handlers downstream that might nevertheless be interested in them.


pkgId: 50e00e4752e69944383f79de3abf861da9eaef9121a2fbf63bcdd151e5cb507d
name: perl-XML-Twig
arch: armv7l
version: 3.52
epoch: 0
release: 1
summary: Tree interface to XML documents
url: http://search.cpan.org/dist/XML::Twig
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-Twig-3.52-1.src.rpm
location_href: armv7l/perl-XML-Twig-3.52-1.armv7l.rpm
checksum_type: sha256
description:
  XML::Twig is (yet another!) XML transformation module.

  Its strong points: can be used to process huge documents while still
  being in tree mode; not bound by DOM or SAX, so it is very perlish and
  offers a very comprehensive set of methods; simple to use; DWIMs as
  much as possible

  What it doesn't offer: full SAX support (it can export SAX, but only
  reads XML), full XPath support (unless you use XML::Twig::XPath), nor
  DOM support.

  Other drawbacks: it is a big module, and with over 500 methods
  available it can be a bit overwhelming. A good starting point is the
  tutorial at http://xmltwig.com/xmltwig/tutorial/index.html. In fact the
  whole XML::Twig page at http://xmltwig.com/xmltwig/ has plenty of
  information to get you started with XML::Twig


pkgId: 69d1f67d5887c96feb9469e3a8129fcb58f59666a5474e9406e9f316965ec022
name: perl-YAML
arch: armv7l
version: 1.31
epoch: 0
release: 0
summary: YAML Ain't Markup Language (tm)
url: http://search.cpan.org/dist/YAML/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-YAML-1.31-0.src.rpm
location_href: armv7l/perl-YAML-1.31-0.armv7l.rpm
checksum_type: sha256
description:
  The YAML.pm module implements a YAML Loader and Dumper based on the YAML
  1.0 specification. the http://www.yaml.org/spec/ manpage

  YAML is a generic data serialization language that is optimized for human
  readability. It can be used to express the data structures of most modern
  programming languages. (Including Perl!!!)

  For information on the YAML syntax, please refer to the YAML specification.


pkgId: cf77ea551f1ceeb51b48b1dfbd1791828932b68daebe18818b3713c6541eea16
name: perl-namespace-autoclean
arch: armv7l
version: 0.31
epoch: 0
release: 1
summary: Keep imports out of your namespace
url: https://metacpan.org/pod/namespace::autoclean
rpm_license: perl_5
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-namespace-autoclean-0.31-1.src.rpm
location_href: armv7l/perl-namespace-autoclean-0.31-1.armv7l.rpm
checksum_type: sha256
description:
  When you import a function into a Perl package, it will naturally also be available as a method.
  The namespace::autoclean pragma will remove all imported symbols at the end of the current package's
  compile cycle. Functions called in the package itself will still be bound by their name,
  but they won't show up as methods on your class or instances.
  This module is very similar to namespace::clean, except it will clean all imported functions,
  no matter if you imported them before or after you used the pragma.
  It will also not touch anything that looks like a method.
  If you're writing an exporter and you want to clean up after yourself (and your peers),
  you can use the -cleanee switch to specify what package to clean:

  package My::MooseX::namespace::autoclean;
  use strict;

  use namespace::autoclean (); # no cleanup, just load

  sub import {
      namespace::autoclean->import(
        -cleanee => scalar(caller),
      );
  }


pkgId: 690015dbb74c8e5894e41890d5d53d550d60039ecf6bb2534b89cb290770c22f
name: perl-namespace-clean
arch: armv7l
version: 0.27
epoch: 0
release: 1
summary: Keep imports and functions out of your namespace
url: https://metacpan.org/pod/namespace::clean
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-namespace-clean-0.27-1.src.rpm
location_href: armv7l/perl-namespace-clean-0.27-1.armv7l.rpm
checksum_type: sha256
description:
  Keeping packages clean
  When you define a function, or import one, into a Perl package,
  it will naturally also be available as a method. This does not
  per se cause problems, but it can complicate subclassing and,
  for example, plugin classes that are included via multiple
  inheritance by loading them as base classes.

  The namespace::clean pragma will remove all previously declared
  or imported symbols at the end of the current package's compile cycle.
  Functions called in the package itself will still be bound by their name,
  but they won't show up as methods on your class or instances.

  By unimporting via no you can tell namespace::clean to start
  collecting functions for the next use namespace::clean; specification.

  You can use the -except flag to tell namespace::clean that you don't
  want it to remove a certain function or method. A common use would be
  a module exporting an import method along with some functions:


pkgId: d8cf126fca278cee6290ac30352c20ed04cc408efbdce8d58f3231ee45bfe6e1
name: prelink
arch: armv7l
version: 20130503
epoch: 0
release: 0
summary: An ELF Prelinking Utility
url: http://people.redhat.com/jakub/prelink/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: prelink-20130503-0.src.rpm
location_href: armv7l/prelink-20130503-0.armv7l.rpm
checksum_type: sha256
description:
  The prelink program is a utility that modifies shared libraries and
  executables in the ELF format so that far less relocations need to be
  resolved at run time.  This decreases program start-up time.

  Be aware that prelink can modify all libraries and executables on your
  system. Applications which monitor changes in files or RPM itself
  will no longer work.


pkgId: 3fd7ad2062e7b7c85b223b0cbdf24955548ac5ad114522b30eeda483e0da1406
name: privilege-verifier
arch: armv7l
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Verification Utility
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: armv7l/privilege-verifier-1.4.0-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Verifier Utility provides functions to verify privilege information of packages to be installed.


pkgId: a8213d9c22f3a7281f076e87e5d77e7a2077cc47d5d9821dfbed0ccf9391dc6c
name: protobuf
arch: armv7l
version: 25.0.0
epoch: 0
release: 1
summary: Protocol Buffers - Google's data interchange format
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-25.0.0-1.src.rpm
location_href: armv7l/protobuf-25.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  Protocol Buffers are a way of encoding structured data in an efficient
  yet extensible format. Google uses Protocol Buffers for almost all of
  its internal RPC protocols and file formats.

  Protocol buffers are a flexible, efficient, automated mechanism for
  serializing structured data – think XML, but smaller, faster, and
  simpler. You define how you want your data to be structured once, then
  you can use special generated source code to easily write and read
  your structured data to and from a variety of data streams and using a
  variety of languages. You can even update your data structure without
  breaking deployed programs that are compiled against the "old" format.


pkgId: d11f29f5a6fe46d9291c8d5675d58ed31756679c3739b02bc49b478862db361c
name: protobuf-lite
arch: armv7l
version: 25.0.0
epoch: 0
release: 1
summary: Protocol Buffers LITE_RUNTIME libraries
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-25.0.0-1.src.rpm
location_href: armv7l/protobuf-lite-25.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  Protocol Buffers built with optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: fc141761814e50c79c37e5c098112644ef221648afc7652b511d4009a4d43beb
name: protobuf-lite-devel
arch: armv7l
version: 25.0.0
epoch: 0
release: 1
summary: Protocol Buffers LITE_RUNTIME development libraries
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-25.0.0-1.src.rpm
location_href: armv7l/protobuf-lite-devel-25.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  This package contains development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: e3df6363dbe11f9d5205fee7de89f3d53dc7620664f31984b1312011f8c724e6
name: protobuf-lite-static
arch: armv7l
version: 25.0.0
epoch: 0
release: 1
summary: Static development files for protobuf-lite
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-25.0.0-1.src.rpm
location_href: armv7l/protobuf-lite-static-25.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  This package contains static development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: a94d71687141d7a15e9d5c80d18af7ba1cf99763f878ceef54a9d7fa0aad4c43
name: psmisc
arch: armv7l
version: 23.6
epoch: 0
release: 1
summary: Utilities for managing processes on your system
url: http://sourceforge.net/projects/psmisc/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: psmisc-23.6-1.src.rpm
location_href: armv7l/psmisc-23.6-1.armv7l.rpm
checksum_type: sha256
description:
  The psmisc package contains utilities for managing processes on your
  system: pstree, killall and fuser.  The pstree command displays a tree
  structure of all of the running processes on your system.  The killall
  command sends a specified signal (SIGTERM if nothing is specified) to
  processes identified by name.  The fuser command identifies the PIDs of
  processes that are using specified files or filesystems.


pkgId: 15f266590ae068ba05a1ebffd16326e12dd16c3d62bfc4ed4c7aacff9bee3e0e
name: pulseaudio
arch: armv7l
version: 15.0
epoch: 0
release: 40
summary: Improved Linux sound server
url: http://pulseaudio.org
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Audio
rpm_sourcerpm: pulseaudio-15.0-40.src.rpm
location_href: armv7l/pulseaudio-15.0-40.armv7l.rpm
checksum_type: sha256
description:
  PulseAudio is a sound server for Linux and other Unix like operating
  systems. It is intended to be an improved drop-in replacement for the
  Enlightened Sound Daemon (ESOUND).


pkgId: 1d94149c1456184ae342e5612da6dd1369c98c768c679cccfe10999a4b8becd3
name: pulseaudio-utils
arch: armv7l
version: 15.0
epoch: 0
release: 40
summary: Command line tools for the PulseAudio sound server
url: http://pulseaudio.org
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Audio
rpm_sourcerpm: pulseaudio-15.0-40.src.rpm
location_href: armv7l/pulseaudio-utils-15.0-40.armv7l.rpm
checksum_type: sha256
description:
  These tools provide command line access to various features of the
  PulseAudio sound server. Included tools are:
  pabrowse - Browse available PulseAudio servers on the local network.
  paplay - Playback a WAV file via a PulseAudio sink.
  pacat - Cat raw audio data to a PulseAudio sink.
  parec - Cat raw audio data from a PulseAudio source.
  pacmd - Connect to PulseAudio's built-in command line control interface.
  pactl - Send a control command to a PulseAudio server.
  padsp - /dev/dsp wrapper to transparently support OSS applications.
  pax11publish - Store/retrieve PulseAudio default server/sink/source
  settings in the X11 root window.


pkgId: 375a5822f36f913dac01504c0551e1eefa719bf7a4424b5f2e52a7b78702c8d4
name: pygobject
arch: armv7l
version: 3.46.0
epoch: 0
release: 1.1
summary: Python bindings for GObject
url: http://www.pygtk.org/
rpm_license: LGPLv2+
rpm_vendor: tizen
rpm_group: Development/Languages
rpm_sourcerpm: pygobject-3.46.0-1.1.src.rpm
location_href: armv7l/pygobject-3.46.0-1.1.armv7l.rpm
checksum_type: sha256
description:
  The pygobject package provides a convenient wrapper for the GObject library
  for use in Python programs.


pkgId: d92def925aab8cef68d4a28cbe354f7b98c38525b51be58d18acfcff70458d7a
name: pygobject-devel
arch: armv7l
version: 3.46.0
epoch: 0
release: 1.1
summary: Development files for building add-on libraries
url: http://www.pygtk.org/
rpm_license: LGPLv2+
rpm_vendor: tizen
rpm_group: Development/Languages
rpm_sourcerpm: pygobject-3.46.0-1.1.src.rpm
location_href: armv7l/pygobject-devel-3.46.0-1.1.armv7l.rpm
checksum_type: sha256
description:
  This package contains files required to build wrappers for pygobject-based
  libraries such as pygtk2.


pkgId: 439e75790377dd7b7c1d016b26466ff0955430f09ea543a2a4fd0f95819c519a
name: python-Cheetah
arch: armv7l
version: 2.4.4
epoch: 0
release: 0
summary: Cheetah is a template engine and code generation tool
url: http://www.cheetahtemplate.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-Cheetah-2.4.4-0.src.rpm
location_href: armv7l/python-Cheetah-2.4.4-0.armv7l.rpm
checksum_type: sha256
description:
  Cheetah is an open source template engine and code generation tool.

  It can be used standalone or combined with other tools and frameworks. Web
  development is its principle use, but Cheetah is very flexible and is also being
  used to generate C++ game code, Java, sql, form emails and even Python code.


pkgId: e90e8788f78f2e906e1102778aa6a140076471c9b79bc3dcf1151665cb448100
name: python-M2Crypto
arch: armv7l
version: 0.35.1.1
epoch: 0
release: 0
summary: Crypto and SSL toolkit for Python
url: http://chandlerproject.org/bin/view/Projects/MeTooCrypto
rpm_license: MIT and ZPL-2.0 and BSD-3-Clause
rpm_vendor: tizen
rpm_group: Platfrom Development/Python
rpm_sourcerpm: python-M2Crypto-0.35.1.1-0.src.rpm
location_href: armv7l/python-M2Crypto-0.35.1.1-0.armv7l.rpm
checksum_type: sha256
description:
  M2Crypto is a crypto and SSL toolkit for Python featuring the
  following:

  RSA, DSA, DH, HMACs, message digests, symmetric ciphers (including
  AES). SSL functionality to implement clients and servers. HTTPS
  extensions to Python's httplib, urllib, and xmlrpclib. Unforgeable
  HMAC'ing AuthCookies for web session management. FTP/TLS client and
  server. S/MIME. ZServerSSL: A HTTPS server for Zope. ZSmime: An S/MIME
  messenger for Zope.

  It currently lives at
  http://wiki.osafoundation.org/bin/view/Projects/MeTooCrypto. The
  original M2Crypto homepage is at http://sandbox.rulemaker.net/ngps/m2/.


pkgId: 3154b879bafb52e20c0996afd7d92c93b74aa84c75ea6590dd11acfe39f0a393
name: python-PyYAML
arch: armv7l
version: 3.10
epoch: 0
release: 0
summary: YAML parser and emitter for Python
url: http://pyyaml.org/wiki/PyYAML
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-PyYAML-3.10-0.src.rpm
location_href: armv7l/python-PyYAML-3.10-0.armv7l.rpm
checksum_type: sha256
description:
  YAML is a data serialization format designed for human readability
  and interaction with scripting languages.  PyYAML is a YAML parser
  and emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: ac646b7d849e0582425f875970ec279538cd87bf24be0cec8ce530ed5255eb9f
name: python-ZSI
arch: noarch
version: 2.1.a1
epoch: 0
release: 0
summary: Zolera SOAP Infrastructure
url: http://pywebsvcs.sf.net
rpm_license: Python
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-ZSI-2.1.a1-0.src.rpm
location_href: noarch/python-ZSI-2.1.a1-0.noarch.rpm
checksum_type: sha256
description:
  ZSI, the Zolera SOAP Infrastructure, is a pure-Python module that
  provides an implementation of SOAP messaging, as described in SOAP 1.1
  Specification (see http://www.w3.org/TR/soap).  It can also be used to
  build applications using SOAP Messages with Attachments (see
  http://www.w3.org/TR/SOAP-attachments).  ZSI is intended to make it
  easier to write web services in Python.

  In particular, ZSI parses and generates SOAP messages, and converts
  between native Python datatypes and SOAP syntax. Simple dispatch and
  invocation methods are supported.  There are no known bugs.  Its only
  known limitation is that it cannot handle multi-dimensional arrays.


pkgId: af48b021d9f27850983df7c6d76a41c00c66c2f74cb7b6a053f0064fb14dd3cc
name: python-coverage
arch: armv7l
version: 3.6
epoch: 0
release: 0
summary: Code coverage measurement for Python
url: http://nedbatchelder.com/code/coverage
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-coverage-3.6-0.src.rpm
location_href: armv7l/python-coverage-3.6-0.armv7l.rpm
checksum_type: sha256
description:
  Coverage.py measures code coverage, typically during test execution. It uses
  the code analysis tools and tracing hooks provided in the Python standard
  library to determine which lines are executable, and which have been executed.


pkgId: 8fd88627c661e952529f2d7f2f16c1a0898ebf40fd647f9ac8547ac9ec0a6b27
name: python-cython
arch: armv7l
version: 0.29.21
epoch: 0
release: 0
summary: The Cython compiler for writing C extensions for the Python language
url: http://www.cython.org
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-cython-0.29.21-0.src.rpm
location_href: armv7l/python-cython-0.29.21-0.armv7l.rpm
checksum_type: sha256
description:
  The Cython language makes writing C extensions for the Python language as
  easy as Python itself.  Cython is a source code translator based on the
  well-known Pyrex, but supports more cutting edge functionality and
  optimizations.

  The Cython language is very close to the Python language (and most Python
  code is also valid Cython code), but Cython additionally supports calling C
  functions and declaring C types on variables and class attributes. This
  allows the compiler to generate very efficient C code from Cython code.

  This makes Cython the ideal language for writing glue code for external C
  libraries, and for fast C modules that speed up the execution of Python
  code.


pkgId: 7ea9036d3dfe77e05ecd01ca55c8b1235c64e4c19988255643e44e287a40f452
name: python-distribute
arch: noarch
version: 0.6.32
epoch: 0
release: 0
summary: Easily download, build, install, upgrade, and uninstall Python packages
url: http://packages.python.org/distribute
rpm_license: Python-2.0 or ZPL-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-distribute-0.6.32-0.src.rpm
location_href: noarch/python-distribute-0.6.32-0.noarch.rpm
checksum_type: sha256
description:
  Distribute is a fork of the Setuptools project.

  Distribute is intended to replace Setuptools as the standard method for working
  with Python module distributions.


pkgId: 08bbbfead4e89ef71ed0b5a2f3dc5180822a464497d5f479750dba7a858ae1be
name: python-gobject-cairo
arch: armv7l
version: 3.36.1
epoch: 0
release: 0
summary: Python bindings for GObject -- Cairo bindings
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-gobject-3.36.1-0.src.rpm
location_href: armv7l/python-gobject-cairo-3.36.1-0.armv7l.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python that gives you access to
  GLib's GObjects.

  This package contains the Python Cairo bindings for GObject.


pkgId: 3a7bdef22db182b3038d379b9aef34f26342264d54b3f822ebe884898a0c0099
name: python-gobject-pygtkcompat
arch: armv7l
version: 3.36.1
epoch: 0
release: 0
summary: Python bindings for GObject -- PyGTK Backwards Compatibility
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-gobject-3.36.1-0.src.rpm
location_href: armv7l/python-gobject-pygtkcompat-3.36.1-0.armv7l.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python that gives you access to
  GLib's GObjects.

  This package contains a module providing backwards compatibility to
  pygtk.


pkgId: 21dc0db72788dd87c14a87473adf5d2bc07ca889c866843e8df4389d82c45495
name: python-gpgme
arch: armv7l
version: 0.1
epoch: 0
release: 0
summary: A Python module for working with OpenPGP messages
url: http://pypi.python.org/pypi/pygpgme
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-gpgme-0.1-0.src.rpm
location_href: armv7l/python-gpgme-0.1-0.armv7l.rpm
checksum_type: sha256
description:
  PyGPGME is a Python module that lets you sign, verify, encrypt and
  decrypt messages using the OpenPGP format.

  It is built on top of the GNU Privacy Guard and the GPGME library.


pkgId: 45059376575b96bea6daf4f75867ac0c0badf4311c31682e7d050165209a3637
name: python-iniparse
arch: noarch
version: 0.4
epoch: 0
release: 0
summary: Python Module for Accessing and Modifying Configuration Data in INI files
url: http://code.google.com/p/iniparse/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-iniparse-0.4-0.src.rpm
location_href: noarch/python-iniparse-0.4-0.noarch.rpm
checksum_type: sha256
description:
  iniparse is an INI parser for Python which is API compatible with the
  standard library's ConfigParser, preserves structure of INI files
  (order of sections & options, indentation, comments, and blank lines
  are preserved when data is updated), and is more convenient to use.


pkgId: e1ef8bf3028e122bdf056081cf1bbfcdcef81043da2fc3edd778466cf12e6eb8
name: python-numpy
arch: armv7l
version: 1.16.6
epoch: 0
release: 0
summary: NumPy array processing for numbers, strings, records and objects
url: http://www.numpy.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/Python
rpm_sourcerpm: python-numpy-1.16.6-0.src.rpm
location_href: armv7l/python-numpy-1.16.6-0.armv7l.rpm
checksum_type: sha256
description:
  NumPy is a general-purpose array-processing package designed to
  efficiently manipulate large multi-dimensional arrays of arbitrary
  records without sacrificing too much speed for small multi-dimensional
  arrays.  NumPy is built on the Numeric code base and adds features
  introduced by numarray as well as an extended C-API and the ability to
  create arrays of arbitrary type which also makes NumPy suitable for
  interfacing with general-purpose data-base applications.

  There are also basic facilities for discrete fourier transform,
  basic linear algebra and random number generation.


pkgId: 7a508d9f6110ecf594c9ea3581c72c8ea670d87f995b911e09b680ee48bee739
name: python-pyOpenSSL
arch: noarch
version: 19.0.0.0
epoch: 0
release: 0
summary: Python wrapper module around the OpenSSL library
url: https://github.com/pyca/pyopenssl
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-pyOpenSSL-19.0.0.0-0.src.rpm
location_href: noarch/python-pyOpenSSL-19.0.0.0-0.noarch.rpm
checksum_type: sha256
description:
  High-level wrapper around a subset of the OpenSSL library, includes
   * SSL.Connection objects, wrapping the methods of Python's portable
     sockets
   * Callbacks written in Python
   * Extensive error-handling mechanism, mirroring OpenSSL's error codes
  ...  and much more ;)


pkgId: 70cc990589b8e3b59cc28d996e8ad8efd7aeb882910864c2bfcc51a8aadad111
name: python-pycrypto
arch: armv7l
version: 2.6.1
epoch: 0
release: 0
summary: Cryptographic modules for Python
url: http://www.pycrypto.org/
rpm_license: Public Domain
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-pycrypto-2.6.1-0.src.rpm
location_href: armv7l/python-pycrypto-2.6.1-0.armv7l.rpm
checksum_type: sha256
description:
  The package contains:

    * Hash functions: MD2, MD4, RIPEMD, SHA256.
    * Block encryption algorithms: AES, ARC2, Blowfish, CAST, DES,
      Triple-DES, IDEA, RC5.
    * Stream encryption algorithms: ARC4, simple XOR.
    * Public-key algorithms: RSA, DSA, ElGamal, qNEW.
    * Protocols: All-or-nothing transforms, chaffing/winnowing.
    * Miscellaneous: RFC1751 module for converting 128-key keys into a
      set of English words, primality testing.
    * Some demo programs (currently all quite old and outdated).


pkgId: e2f51eaf2e147c21a0f65099fe8ca028f86d404f6c6e5b6b5b4168aa1d7fdcf1
name: python-pycurl
arch: armv7l
version: 7.19.0
epoch: 0
release: 0
summary: A Python interface to libcurl
url: http://pycurl.sourceforge.net/
rpm_license: LGPL-2.1+ or MIT/X11
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-pycurl-7.19.0-0.src.rpm
location_href: armv7l/python-pycurl-7.19.0-0.armv7l.rpm
checksum_type: sha256
description:
  PycURL is a Python interface to libcurl. PycURL can be used to fetch
  objects identified by a URL from a Python program, similar to the
  urllib Python module. PycURL is mature, very fast, and supports a lot
  of features.


pkgId: d2fba218199bf89bb7ecd5f2cb05cb596ae917f59fe73c0574327962e1c468db
name: python-sqlite
arch: armv7l
version: 2.6.3
epoch: 0
release: 0
summary: DB-API 2.0 interface for SQLite 3.x
url: http://pysqlite.googlecode.com/
rpm_license: Zlib
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-sqlite-2.6.3-0.src.rpm
location_href: armv7l/python-sqlite-2.6.3-0.armv7l.rpm
checksum_type: sha256
description:
  Python interface to SQLite 3

  pysqlite is an interface to the SQLite 3.x embedded relational database engine.
  It is almost fully compliant with the Python database API version 2.0 also
  exposes the unique features of SQLite.


pkgId: bc5afeb5406ff528c3ccce912510fe2b6841eefdef7170b9cbe50b93fff68ab9
name: python-urlgrabber
arch: noarch
version: 3.9.1
epoch: 0
release: 0
summary: A high-level cross-protocol url-grabber
url: http://urlgrabber.baseurl.org/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-urlgrabber-3.9.1-0.src.rpm
location_href: noarch/python-urlgrabber-3.9.1-0.noarch.rpm
checksum_type: sha256
description:
  A high-level cross-protocol url-grabber for python supporting HTTP, FTP
  and file locations.  Features include keepalive, byte ranges, throttling,
  authentication, proxies and more.


pkgId: f1c9c05ce8cce4c745cb5829a1a011d57a95be1c8a1de48d00bd1387f502c3a5
name: python3-Cheetah
arch: armv7l
version: 3.3.3b1
epoch: 0
release: 0
summary: Cheetah is a template engine and code generation tool
url: http://www.cheetahtemplate.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python3
rpm_sourcerpm: python3-Cheetah-3.3.3b1-0.src.rpm
location_href: armv7l/python3-Cheetah-3.3.3b1-0.armv7l.rpm
checksum_type: sha256
description:
  Cheetah is an open source template engine and code generation tool.

  It can be used standalone or combined with other tools and frameworks. Web
  development is its principle use, but Cheetah is very flexible and is also being
  used to generate C++ game code, Java, sql, form emails and even Python3 code.


pkgId: 1baddb83c6c40ff8196522aa7ed18926c4971c7bfd18b81878ee3a6f67c039a3
name: python3-PyYAML
arch: armv7l
version: 3.10
epoch: 0
release: 0
summary: YAML parser and emitter for Python3
url: http://pyyaml.org/wiki/PyYAML
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-PyYAML-3.10-0.src.rpm
location_href: armv7l/python3-PyYAML-3.10-0.armv7l.rpm
checksum_type: sha256
description:
  PyYAML for Python3

  YAML is a data serialization format designed for human readability
  and interaction with scripting languages.  PyYAML is a YAML parser
  and emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: 974c9fb603ec5697b3cda55a18dd8aec9af9c2242d7bfb49fa2a211bfd9496d7
name: python3-asn1crypto
arch: armv7l
version: 0.24.0
epoch: 0
release: 0
summary: python3-asn1crypto
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Testing
rpm_sourcerpm: python3-asn1crypto-0.24.0-0.src.rpm
location_href: armv7l/python3-asn1crypto-0.24.0-0.armv7l.rpm
checksum_type: sha256
description:
  ASN.1 parser and serializer with definitions for private keys, public keys,
  certificates, CRL, OCSP, CMS, PKCS#3, PKCS#7, PKCS#8, PKCS#12, PKCS#5, X509 and TSP


pkgId: d670b91ffc463293275df9307d8bd4097564cd389e4c6d0959865b5f59628008
name: python3-atomicwrites
arch: armv7l
version: 1.2.1
epoch: 0
release: 0
summary: Atomic file writes for Python
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-atomicwrites-1.2.1-0.src.rpm
location_href: armv7l/python3-atomicwrites-1.2.1-0.armv7l.rpm
checksum_type: sha256
description:
  Atomic file writes for python3.
  Features that distinguish it from other similar libraries:

  - Race-free assertion that the target file doesn't yet exist. This can be
    controlled with the 'overwrite' parameter.

  - High-level API that wraps a very flexible class-based API


pkgId: c92e1d865209233447e537686326a1a8fab737886a427281df1589efc26e858d
name: python3-catkin-pkg
arch: noarch
version: 0.4.23
epoch: 0
release: 1
summary: catkin package library
rpm_license: BSD
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-catkin-pkg-0.4.23-1.src.rpm
location_href: noarch/python3-catkin-pkg-0.4.23-1.noarch.rpm
checksum_type: sha256
description:
  The pytest framework makes it easy to write small tests, yet scales to support complex functional testing for applications and libraries.


pkgId: 09adeeb097f92308a7549831a110105e757253578f3d0d03c189fc77951fa72a
name: python3-cffi
arch: armv7l
version: 1.14.5
epoch: 0
release: 0
summary: Foreign Function Interface for Python calling C code
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-cffi-1.14.5-0.src.rpm
location_href: armv7l/python3-cffi-1.14.5-0.armv7l.rpm
checksum_type: sha256
description:
  Foreign Function Interface for Python calling C code. The aim of this project
  is to provide a convenient and reliable way of calling C code from Python.


pkgId: 67d43ad41d8285e841f7f56058f0bfca65e1aaa7bd0038398babcc25a10af27e
name: python3-cryptography
arch: armv7l
version: 2.3
epoch: 0
release: 0
summary: PyCA's cryptography library
rpm_license: Apache-2.0 or BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-cryptography-2.3-0.src.rpm
location_href: armv7l/python3-cryptography-2.3-0.armv7l.rpm
checksum_type: sha256
description:
  cryptography is a package designed to expose cryptographic primitives and
  recipes to Python developers.


pkgId: ee550cfcb4ae98bb3df092d411585e1782062f77cf8fcdbe30caf3b5a65137dc
name: python3-distlib
arch: noarch
version: 0.3.1
epoch: 0
release: 1
summary: packaging and distribution of Python software
rpm_license: Python-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-distlib-0.3.1-1.src.rpm
location_href: noarch/python3-distlib-0.3.1-1.noarch.rpm
checksum_type: sha256
description:
  Distlib is a library which implements low-level functions that relate to packaging and distribution of Python software.


pkgId: 07e49c13c17f0e7ec1d1a2f4d5295d330573dde092db38866f5d7f66a5acaaf7
name: python3-empy
arch: noarch
version: 3.3.2
epoch: 0
release: 0
summary: A powerful and robust template system for Python
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Languages
rpm_sourcerpm: python3-empy-3.3.2-0.src.rpm
location_href: noarch/python3-empy-3.3.2-0.noarch.rpm
checksum_type: sha256
description:
  EmPy is a system for embedding Python expressions and statements in template
  text; it takes an EmPy source file, processes it, and produces output.


pkgId: 20f6491b1b531d99b99b9f5370058cefd72d0c0a1993bb6afdf64a3130f366ac
name: python3-gobject-cairo
arch: armv7l
version: 3.46.0
epoch: 0
release: 0
summary: Python3 bindings for GObject -- Cairo bindings
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-gobject-3.46.0-0.src.rpm
location_href: armv7l/python3-gobject-cairo-3.46.0-0.armv7l.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python3 that gives you access to
  GLib's GObjects.

  This package contains the Python3 Cairo bindings for GObject.


pkgId: 125cf5df626cd0444d8387bd8ef4f04859b6c27626fcf6b3f055c5e87ef144eb
name: python3-gobject-pygtkcompat
arch: armv7l
version: 3.46.0
epoch: 0
release: 0
summary: Python3 bindings for GObject -- PyGTK Backwards Compatibility
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-gobject-3.46.0-0.src.rpm
location_href: armv7l/python3-gobject-pygtkcompat-3.46.0-0.armv7l.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python3 that gives you access to
  GLib's GObjects.

  This package contains a module providing backwards compatibility to
  pygtk.


pkgId: 2080ee1c38285fb5c37a1fa7fd4f05bb32548d0251ff5da6c74d64152be51472
name: python3-grpcio
arch: armv7l
version: 1.70.0
epoch: 0
release: 0
summary: HTTP/2-based Remote Procedure Call implementation
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-grpcio-1.70.0-0.src.rpm
location_href: armv7l/python3-grpcio-1.70.0-0.armv7l.rpm
checksum_type: sha256
description:
  gRPC is a remote procedure call (RPC) framework. gRPC enables client
  and server applications to communicate, and enables the building of
  connected systems.


pkgId: e3c86e9a74649fa4fefb4366fa0c79de567f9c951d04380072370a6483ff1199
name: python3-idna
arch: noarch
version: 2.7
epoch: 0
release: 0
summary: Internationalized Domain Names in Applications (IDNA)
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-idna-2.7-0.src.rpm
location_href: noarch/python3-idna-2.7-0.noarch.rpm
checksum_type: sha256
description:
  A library to support the Internationalised Domain Names in
  Applications (IDNA) protocol as specified in RFC 5891
  http://tools.ietf.org/html/rfc5891. This version of the protocol
  is often referred to as \A1\B0IDNA2008\A1\B1 and can produce different
  results from the earlier standard from 2003.

  The library is also intended to act as a suitable drop-in replacement
  for the \A1\B0encodings.idna\A1\B1 module that comes with the Python standard
  library but currently only supports the older 2003 specification.


pkgId: 6a4ca696230ac8b8028d87c591d494dfcfde449d5b9347a170a7d29f04dfee29
name: python3-iso8601
arch: noarch
version: 0.1.12
epoch: 0
release: 0
summary: Simple module to parse ISO 8601 dates
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-iso8601-0.1.12-0.src.rpm
location_href: noarch/python3-iso8601-0.1.12-0.noarch.rpm
checksum_type: sha256
description:
  Simple module to parse ISO 8601 dates

  This module parses the most common forms of ISO 8601 date strings (e.g.
  2007-01-14T20:34:22+00:00) into datetime objects.


pkgId: fd8e9008fffaa516d1c42afc73cadb328378dda6fcb3b487bc01180dc9983b06
name: python3-jinja2
arch: noarch
version: 3.1.3
epoch: 0
release: 1
summary: A syntax highlighting engine written in Python3
url: https://jinja.palletsprojects.com/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-jinja2-3.1.3-1.src.rpm
location_href: noarch/python3-jinja2-3.1.3-1.noarch.rpm
checksum_type: sha256
description:
  Jinja is a fast, expressive, extensible templating engine. Special
  placeholders in the template allow writing code similar to Python
  syntax. Then the template is passed data to render the final document.


pkgId: 2675a189705b38b3f8b44f9f67b060b05c5c7834948d2961106eccf722778ede
name: python3-more-itertools
arch: noarch
version: 5.0.0
epoch: 0
release: 0
summary: More routines for operating on iterables, beyond itertools
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-more-itertools-5.0.0-0.src.rpm
location_href: noarch/python3-more-itertools-5.0.0-0.noarch.rpm
checksum_type: sha256
description:
  I love itertools; it's one of the most beautiful, composable standard libs.
  Whenever I have an iteration problem, there's almost always an itertools
  routine that fits it perfectly. Sometimes, however, neither itertools nor the
  recipes included in its docs do quite what I need.

  Here I've collected several routines I've reached for but not found. Since
  they are deceptively tricky to get right, I've wrapped them up into a library.
  We've also included implementations of the recipes from the itertools
  documentation. Enjoy! Any additions are welcome; just file a pull request.


pkgId: 58a719d9352ccdc332343ef6a466f4a1ffd9dc90707716e00254135cc783ae04
name: python3-netifaces
arch: armv7l
version: 0.10.5
epoch: 0
release: 0
summary: Portable network interface information
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-netifaces-0.10.5-0.src.rpm
location_href: armv7l/python3-netifaces-0.10.5-0.armv7l.rpm
checksum_type: sha256
description:
  netifaces provides a (hopefully portable-ish) way for Python programmers to
  get access to a list of the network interfaces on the local machine, and to
  obtain the addresses of those network interfaces.

  The package has been tested on Mac OS X, Windows XP, Windows Vista, Linux and
  Solaris. On Windows, it is currently not able to retrieve IPv6 addresses,
  owing to shortcomings of the Windows API.

  It should work on other UNIX-like systems provided they implement either
  getifaddrs() or support the SIOCGIFxxx socket options, although the data
  provided by the socket options is normally less complete.


pkgId: 8f59ed4f8613bc2a2d4393e22e6f070d3e8cf7b1ccc635e3e498c66040a5c6e6
name: python3-opencv
arch: armv7l
version: 4.7.0
epoch: 0
release: 7
summary: OpenCV Python3 Library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: opencv-4.7.0-7.src.rpm
location_href: armv7l/python3-opencv-4.7.0-7.armv7l.rpm
checksum_type: sha256
description:
  The Open Computer Vision Library (Python3) includes various algorithms for computre vision problems.


pkgId: ea952469c50aaa365b1af4e9487a0edefcbf7c9c0c1dc2536549e009e34c1139
name: python3-pycparser
arch: armv7l
version: 2.18
epoch: 0
release: 0
summary: C parser in Python
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-pycparser-2.18-0.src.rpm
location_href: armv7l/python3-pycparser-2.18-0.armv7l.rpm
checksum_type: sha256
description:
  pycparser is a complete parser of the C language, written in pure Python using
  the PLY parsing library. It parses C code into an AST and can serve as a
  front-end for C compilers or analysis tools.


pkgId: 2aac27eabf4964ce2c1aa3e3e7d5fe281b47893f343d537162bde47f9072e4ad
name: python3-pytest-repeat
arch: noarch
version: 0.8.0
epoch: 0
release: 1
summary: pytest-repeat is a plugin for pytest
rpm_license: MPL-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-pytest-repeat-0.8.0-1.src.rpm
location_href: noarch/python3-pytest-repeat-0.8.0-1.noarch.rpm
checksum_type: sha256
description:
  pytest-repeat is a plugin for pytest that makes it easy to repeat a single test, or multiple tests, a specific number of times.


pkgId: 8c2722103668dc73965a456707a448c59abeb34811719aa7d0dada26973f6eca
name: python3-pytz
arch: armv7l
version: 2018.5
epoch: 0
release: 0
summary: World timezone definitions, modern and historical
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-pytz-2018.5-0.src.rpm
location_href: armv7l/python3-pytz-2018.5-0.armv7l.rpm
checksum_type: sha256
description:
  python-tz brings the Olson tz database into Python.
  This library allows accurate and cross platform timezone calculations
  using Python 2.3 or higher. It also solves the issue of ambiguous times
  at the end of daylight savings, which you can read more about in
  the Python Library Reference (datetime.tzinfo).


pkgId: 54d2980781f9eb8110176c78ce6b2ae551227c8305a26a31709d2d1dcdd29f42
name: python3-sqlite
arch: armv7l
version: 0.5.4
epoch: 0
release: 0
summary: DB-API 2.0 interface for SQLite 3.x
url: https://github.com/coleifer/pysqlite3
rpm_license: Zlib
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python3-sqlite-0.5.4-0.src.rpm
location_href: armv7l/python3-sqlite-0.5.4-0.armv7l.rpm
checksum_type: sha256
description:
  Python3 interface to SQLite 3
  pysqlite is an interface to the SQLite 3.x embedded relational database engine.
  It is almost fully compliant with the Python3 database API version 2.0 also
  exposes the unique features of SQLite.


pkgId: f495cd684ca0049924639c90504598c0c7b229604949ef24ceaf375dfca853f7
name: re2c
arch: armv7l
version: 4.0.2
epoch: 0
release: 0
summary: Tool for generating C-based recognizers from regular expressions
url: http://re2c.org/
rpm_license: PD
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: re2c-4.0.2-0.src.rpm
location_href: armv7l/re2c-4.0.2-0.armv7l.rpm
checksum_type: sha256
description:
  re2c is a tool for writing fast and flexible lexers. Unlike other such
  tools, it concentrates solely on generating efficient code for matching
  regular expressions. This makes it suitable for a wide variety of
  applications. The generated scanners approach hand-crafted ones in
  terms of size and speed.


pkgId: b7a6e4d1713a42e82c2de67204badb00771670e605ab69a5bd646b63b48b0cb9
name: rnnoise
arch: armv7l
version: 0
epoch: 0
release: 0.4
summary: Recurrent neural network for audio noise reduction
url: https://gitlab.xiph.org/xiph/rnnoise
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rnnoise-0-0.4.src.rpm
location_href: armv7l/rnnoise-0-0.4.armv7l.rpm
checksum_type: sha256
description:
  RNNoise is a noise suppression library based on a recurrent neural network.

  While it is meant to be used as a library, a simple command-line tool is
  provided as an example. It operates on RAW 16-bit (machine endian) mono PCM
  files sampled at 48 kHz. It can be used as:

  ./examples/rnnoise_demo <noisy speech> <output denoised>

  The output is also a 16-bit raw PCM file.


pkgId: 2b4b532c2fe1d80740e9fce8f76ab14d9744bdd789ccb5533d8bcda836324381
name: rsync
arch: armv7l
version: 3.2.7
epoch: 0
release: 0
summary: A program for synchronizing files over a network
url: http://rsync.samba.org/
rpm_license: GPL-3.0+
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: rsync-3.2.7-0.src.rpm
location_href: armv7l/rsync-3.2.7-0.armv7l.rpm
checksum_type: sha256
description:
  Rsync uses a reliable algorithm to bring remote and host files into
  sync very quickly. Rsync is fast because it just sends the differences
  in the files over the network instead of sending the complete
  files. Rsync is often used as a very powerful mirroring process or
  just as a more capable replacement for the rcp command. A technical
  report which describes the rsync algorithm is included in this
  package.


pkgId: 1323aebb94e63c8abdfd8c3db14ca78bef066f78827f2e8890eb526bfb5266df
name: rust
arch: armv7l
version: 1.90.0
epoch: 0
release: 1
summary: The Rust Programming Language
url: https://www.rust-lang.org
rpm_license: Apache-2.0 or MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-1.90.0-1.src.rpm
location_href: armv7l/rust-1.90.0-1.armv7l.rpm
checksum_type: sha256
description:
  Rust is a systems programming language that runs blazingly fast, prevents
  segfaults, and guarantees thread safety.

  This package includes the Rust compiler and documentation generator.


pkgId: 64b497a0d9d1a8f4d3d68e1c638ca2ca116bfa75ec1e270aad970807cce33f43
name: rust-cfg-if
arch: armv7l
version: 1.0.0
epoch: 0
release: 1
summary: Macro to ergonomically define an item depending on a large number of #[cfg] parameters
url: https://crates.io/crates/cfg-if
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-cfg-if-1.0.0-1.src.rpm
location_href: armv7l/rust-cfg-if-1.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  Macro to ergonomically define an item depending on a large number of #[cfg]
  parameters. Structured like an if-else chain, the first matching branch is the
  item that gets emitted.


pkgId: 8792d1e652e3d36c123bb77bf496385ba4daa1e1c3a2decce58c21c629d41068
name: rust-litrs
arch: armv7l
version: 0.4.0
epoch: 0
release: 1
summary: Parse and inspect Rust literals (i.e
url: https://crates.io/crates/litrs
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-litrs-0.4.0-1.src.rpm
location_href: armv7l/rust-litrs-0.4.0-1.armv7l.rpm
checksum_type: sha256
description:
  Parse and inspect Rust literals (i.e. tokens in the Rust programming language
  representing fixed values). Particularly useful for proc macros, but can also
  be used outside of a proc-macro context.


pkgId: 10a2dc25188757debae74c1a14032e078f9e7548d6d68e5756b6fc89b434b0a6
name: rust-normalize-line-endings
arch: armv7l
version: 0.3.0
epoch: 0
release: 1
url: https://crates.io/crates/normalize-line-endings
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-normalize-line-endings-0.3.0-1.src.rpm
location_href: armv7l/rust-normalize-line-endings-0.3.0-1.armv7l.rpm
checksum_type: sha256
summary:
  Takes an iterator over chars and returns a new iterator with all line endings (\r, \n, or \r\n) as \n

description:
  Takes an iterator over chars and returns a new iterator with all line endings
  (\r, \n, or \r\n) as \n.


pkgId: 895037b3c0caf6fc75b28fdd3c31a5888ae532682ca307084b4c76bb59bbbd8e
name: rust-proc-macro2
arch: armv7l
version: 1.0.51
epoch: 0
release: 1
url: https://crates.io/crates/proc-macro2
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-proc-macro2-1.0.51-1.src.rpm
location_href: armv7l/rust-proc-macro2-1.0.51-1.armv7l.rpm
checksum_type: sha256
summary:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-based libraries from the procedural macro use case

description:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-
  based libraries from the procedural macro use case.


pkgId: c44d7f1caa74c9a8a5236e5e07c8865598cc3018755ec3229c4964c0e5d8d890
name: rust-regex
arch: armv7l
version: 1.7.1
epoch: 0
release: 1
summary: Implementation of regular expressions for Rust
url: https://crates.io/crates/regex
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-regex-1.7.1-1.src.rpm
location_href: armv7l/rust-regex-1.7.1-1.armv7l.rpm
checksum_type: sha256
description:
  Implementation of regular expressions for Rust. This implementation uses finite
  automata and guarantees linear time matching on all inputs.


pkgId: 6f5572f77128b2c3529985fe8eab8439140e4ec80d594d240cae3a23e01cc547
name: rust-scopeguard
arch: armv7l
version: 1.1.0
epoch: 0
release: 1
url: https://crates.io/crates/scopeguard
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-scopeguard-1.1.0-1.src.rpm
location_href: armv7l/rust-scopeguard-1.1.0-1.armv7l.rpm
checksum_type: sha256
summary:
  RAII scope guard that will run a given closure when it goes out of scope, even if the code between panics (assuming unwinding panic)

description:
  RAII scope guard that will run a given closure when it goes out of scope, even
  if the code between panics (assuming unwinding panic).
  Defines the macros `defer!`, `defer_on_unwind!`, `defer_on_success!` as
  shorthands for guards with one of the implemented strategies.


pkgId: b18fdb8a8ae48e669bfffca8695ff663424656f8a39bd68fcd840dd88621b957
name: rust-serde_spanned
arch: armv7l
version: 0.6.1
epoch: 0
release: 1
summary: Native Rust encoder and decoder of TOML-formatted files and streams
url: https://crates.io/crates/serde_spanned
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-serde_spanned-0.6.1-1.src.rpm
location_href: armv7l/rust-serde_spanned-0.6.1-1.armv7l.rpm
checksum_type: sha256
description:
  Native Rust encoder and decoder of TOML-formatted files and streams. Provides
  implementations of the standard Serialize/Deserialize traits for TOML data to
  facilitate deserializing and serializing Rust structures.


pkgId: fe24368070d7dea3e5a1f2b60cf62ed9c0f3b23333cd7d6b868f974b625d8b1d
name: rust-stable_deref_trait
arch: armv7l
version: 1.2.0
epoch: 0
release: 1
url: https://crates.io/crates/stable_deref_trait
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-stable_deref_trait-1.2.0-1.src.rpm
location_href: armv7l/rust-stable_deref_trait-1.2.0-1.armv7l.rpm
checksum_type: sha256
summary:
  Unsafe marker trait for types like Box and Rc that dereference to a stable address even when moved, and hence can be used with libraries such as owning_ref and rental

description:
  Unsafe marker trait for types like Box and Rc that dereference to a stable
  address even when moved, and hence can be used with libraries such as
  owning_ref and rental.


pkgId: 87914a0f9ce5c8dcbf2e24d3699bcb4c70fa2dfe2d8d7a3dc1aacbcd0013b391
name: rust-unicode-ident
arch: armv7l
version: 1.0.6
epoch: 0
release: 1
url: https://crates.io/crates/unicode-ident
rpm_license: (MIT OR Apache-2.0) AND Unicode-DFS-2016
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-unicode-ident-1.0.6-1.src.rpm
location_href: armv7l/rust-unicode-ident-1.0.6-1.armv7l.rpm
checksum_type: sha256
summary:
  Determine whether characters have the XID_Start or XID_Continue properties according to Unicode Standard Annex #31

description:
  Determine whether characters have the XID_Start or XID_Continue properties
  according to Unicode Standard Annex #31.


pkgId: 71d62729ac6d76b6fb85fcfd049c8ac86dc6c4c6ca35e8f7ef6427c7571ef2bc
name: rust-version-compare
arch: armv7l
version: 0.1.1
epoch: 0
release: 1
url: https://crates.io/crates/version-compare
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-version-compare-0.1.1-1.src.rpm
location_href: armv7l/rust-version-compare-0.1.1-1.armv7l.rpm
checksum_type: sha256
summary:
  Rust library to easily compare version numbers with no specific format, and test against various comparison operators

description:
  Rust library to easily compare version numbers with no specific format, and
  test against various comparison operators.


pkgId: e01f2c7062f41ece0e0e7e0295ee37f3e269e34d4d0628383b22778a3d7bf9a3
name: scons
arch: armv7l
version: 4.4.0
epoch: 0
release: 0
summary: Replacement for Make
url: http://www.scons.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Tools/Building
rpm_sourcerpm: scons-4.4.0-0.src.rpm
location_href: armv7l/scons-4.4.0-0.armv7l.rpm
checksum_type: sha256
description:
  SCons is a make replacement that provides a range of enhanced features,
  such as automated dependency generation and built-in compilation cache
  support. SCons rule sets are Python scripts, which means that SCons
  provides itself as well as the features. SCons allows you to use the
  full power of Python to control compilation.


pkgId: 7566f16fee0c2cc93b3ef5b721bb41c1b3eb2571d14435d160c494661b185b0a
name: sdbd-profile_tv
arch: armv7l
version: 3.0.50
epoch: 0
release: 0
summary: SDB daemon extension for TV
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sdbd-3.0.50-0.src.rpm
location_href: armv7l/sdbd-profile_tv-3.0.50-0.armv7l.rpm
checksum_type: sha256
description:
  SDB daemon extension for TV.
  This changes the service unit files of the default SDB daemon service files.


pkgId: 8c6639ac6b988020433f52735da85b65f0d02153ba8834870c95dec0bf68e4b6
name: security-privilege-manager
arch: armv7l
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: armv7l/security-privilege-manager-1.4.0-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.


pkgId: eb819d97968362955aa39d2eac958df1cb26cd0cc040d8274c79569a9568c611
name: security-privilege-manager-extension-iot
arch: armv7l
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen IoT profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: armv7l/security-privilege-manager-extension-iot-1.4.0-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen IoT profile,
  which requires security-profile-manger to be installed before this.


pkgId: ae3fc84b10bfd0bd1f768cb0eed9f130e8a0dc63c2f7794a6bab268dad55c2d1
name: security-privilege-manager-extension-mobile
arch: armv7l
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen Mobile profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: armv7l/security-privilege-manager-extension-mobile-1.4.0-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen Mobile profile,
  which requires security-profile-manger to be installed before this.


pkgId: bf093155523f163297409bf47af8c4d178d42ebbfcfa8668824ba41db01ae368
name: security-privilege-manager-extension-tv
arch: armv7l
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen TV profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: armv7l/security-privilege-manager-extension-tv-1.4.0-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen TV profile,
  which requires security-profile-manger to be installed before this.


pkgId: ba7db1a5a0d2da92e9ea5cb8efa7dcbef7ec2e698defd7051ed0a5936b925435
name: security-privilege-manager-extension-wearable
arch: armv7l
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen Wearable profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: armv7l/security-privilege-manager-extension-wearable-1.4.0-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen Wearable profile,
  which requires security-profile-manger to be installed before this.


pkgId: 9800bea5e1ef121d99b55db2795eb02022959686aad7d1225eea641a676ee313
name: sensord
arch: armv7l
version: 10.0.0
epoch: 0
release: 1
summary: Sensor daemon
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Sensor Framework
rpm_sourcerpm: sensord-10.0.0-1.src.rpm
location_href: armv7l/sensord-10.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  This package provides the fully functional internal API library and the service daemon
  of the Sensor Framework. The library replaces the dummy library installed by sensord-dummy.


pkgId: 04a692eb1446e8e407939b2609669419d9cc14fed8842755c4156b6eb25ee92c
name: sensord-dummy
arch: armv7l
version: 10.0.0
epoch: 0
release: 1
summary: Sensor Framework 'dummy' library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Sensor Framework
rpm_sourcerpm: sensord-10.0.0-1.src.rpm
location_href: armv7l/sensord-dummy-10.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  This package provides the dummy library of the sensor internal API.
  Installing sensord replaces this dummy library with the actually functional library.


pkgId: b42326a9453448c6a892c8c86e49f6d580188b7563125c74bbedb23822d1ae1c
name: sgml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 0
summary: Common SGML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Applications/Text
rpm_sourcerpm: sgml-common-0.6.3-0.src.rpm
location_href: noarch/sgml-common-0.6.3-0.noarch.rpm
checksum_type: sha256
description:
  The sgml-common package contains a collection of entities and DTDs
  that are useful for processing SGML, but that don't need to be
  included in multiple packages.  Sgml-common also includes an
  up-to-date Open Catalog file.


pkgId: 39abcf7c91050d487f82cbad4e5ab1ec7de6812d7a3901cd427ed8b1d60887bf
name: shared-mime-info
arch: armv7l
version: 1.7
epoch: 0
release: 0
summary: Shared MIME Database
url: http://freedesktop.org/wiki/Software/shared-mime-info
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Base/Configuration
rpm_sourcerpm: shared-mime-info-1.7-0.src.rpm
location_href: armv7l/shared-mime-info-1.7-0.armv7l.rpm
checksum_type: sha256
description:
  This package contains:

  - The freedesktop.org shared MIME database spec.

  - The merged GNOME and KDE databases, in the new format.

  - The update-mime-database command, used to install new MIME data.


pkgId: e5ef234237b6971727e1a5ca3565d5ee8bb9d88433433dbd6b5357c3310ad5dc
name: snappy-devel
arch: armv7l
version: 1.1.7
epoch: 0
release: 0
summary: Development files for snappy
url: https://github.com/google/snappy/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: snappy-1.1.7-0.src.rpm
location_href: armv7l/snappy-devel-1.1.7-0.armv7l.rpm
checksum_type: sha256
description:
  Snappy is a compression/decompression library. It does not aim for maximum
  compression, or compatibility with any other compression library; instead, it
  aims for very high speeds and reasonable compression. For instance, compared to
  the fastest mode of zlib, Snappy is an order of magnitude faster for most
  inputs, but the resulting compressed files are anywhere from 20% to 100%
  bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy
  compresses at about 250 MB/sec or more and decompresses at about
  500 MB/sec or more.

  This package holds the development files for snappy.


pkgId: ad81c66158798e1f315b3ea5377c15080502194d76a8f2d7eda9a7e8c3a76f6d
name: snpe-devel
arch: armv7l
version: 1.53.2
epoch: 0
release: 1
summary: development package for snpe-dummy
rpm_license: BSD-2-Clause
rpm_vendor: tizen
rpm_group: Machine Learning/ML Framework
rpm_sourcerpm: snpe-1.53.2-1.src.rpm
rpm_packager: Sangjung Woo <sangjung.woo@samsung.com>
location_href: armv7l/snpe-devel-1.53.2-1.armv7l.rpm
checksum_type: sha256
description:
  This package in public Tizen.org is DUMMY (no contents) to keep the build system
  running w/o actual SNPE packages.


pkgId: 5ec37b11de814fba72dd97922267961d293158277fd15603c5811b7e12538d8c
name: soundtouch
arch: armv7l
version: 2.1.0
epoch: 0
release: 0
summary: Audio processing library
url: https://gitlab.com
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Libraries
rpm_sourcerpm: soundtouch-2.1.0-0.src.rpm
location_href: armv7l/soundtouch-2.1.0-0.armv7l.rpm
checksum_type: sha256
description:
  Soundtouch is an audio processing library that allows changing
  the sound tempo, pitch and playback rate parameters independently from eash other.


pkgId: a59ae7a1ef6abba93131051f781037277f66d443524d142d2ce0d03f15da8ef3
name: sqlcipher
arch: armv7l
version: 4.6.1
epoch: 0
release: 0
url: https://github.com/sqlcipher/sqlcipher
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Security/Crypto Libraries
rpm_sourcerpm: sqlcipher-4.6.1-0.src.rpm
location_href: armv7l/sqlcipher-4.6.1-0.armv7l.rpm
checksum_type: sha256
summary:
  SQLCipher is an open source extension to SQLite that provides transparent 256-bit AES encryption of database files

description:
  SQLCipher is an open source library that provides transparent, secure 256-bit
  AES encryption of SQLite database files. SQLCipher has been adopted as a secure
  database solution by many commercial and open source products, making it one of
  the most popular encrypted database platforms for Mobile, Embedded, and Desktop
  applications.


pkgId: 793793c835bc2eae1706fae7f39471151c6b391c299611bc45e5249d9495d7b3
name: ssat
arch: armv7l
version: 1.4.0
epoch: 0
release: 0
summary: Shell Script Automated Tester
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: ssat-1.4.0-0.src.rpm
rpm_packager: MyungJoo Ham <myungjoo.ham@samsung.com>
location_href: armv7l/ssat-1.4.0-0.armv7l.rpm
checksum_type: sha256
description:
  SSAT provides testing environment for shell scripts with Apache-2.0 license.
  This is created to avoid any complications related with GPL licenses.


pkgId: 2c513a19826dccbe5f5bb674e0588b846100b7a54172717ae0df49d67d82cb8b
name: sshfs
arch: armv7l
version: 2.10
epoch: 0
release: 0
summary: A network filesystem client to connect to SSH servers
url: https://github.com/libfuse/sshfs
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Base/File Systems
rpm_sourcerpm: sshfs-2.10-0.src.rpm
location_href: armv7l/sshfs-2.10-0.armv7l.rpm
checksum_type: sha256
description:
  SSHFS (Secure SHell FileSystem) allows you to mount a remote filesystem
  using SFTP. Now that most SSH servers support and enable this SFTP access
  by default, the SSHFS is very simple to use. It means that there is nothing
  to do on the server-side. Note that SSHFS requires FUSE (Filesystem in
  USErspace) filesystem, that lets non-privileged users create own file systems
  without editing Linux kernel code.


pkgId: 703fb47451a46b8b53dd029ee1e7c4e917517d5ef3ecb904bde43df7a65ee582
name: strace
arch: armv7l
version: 6.6
epoch: 0
release: 0
summary: A utility to trace the system calls of a program
url: http://sourceforge.net/projects/strace/
rpm_license: LGPL-2.1+ and GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: strace-6.6-0.src.rpm
location_href: armv7l/strace-6.6-0.armv7l.rpm
checksum_type: sha256
description:
  With strace, you can trace the activity of a program.  Information
  about any system calls the program makes and the signals it receives
  and processes can be seen.  Child processes can also be tracked.


pkgId: 9424dce5c38a47af2d62b27ced29468151591bd1538f3851ce3795248bef7bd6
name: sudo
arch: armv7l
version: 1.9.15p5
epoch: 0
release: 0
summary: Execute some commands as root
url: http://www.sudo.ws/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sudo-1.9.15p5-0.src.rpm
location_href: armv7l/sudo-1.9.15p5-0.armv7l.rpm
checksum_type: sha256
description:
  Sudo is a command that allows users to execute some commands as root.
  The /etc/sudoers file (edited with 'visudo') specifies which users have
  access to sudo and which commands they can run. Sudo logs all its
  activities to syslogd, so the system administrator can keep an eye on
  things. Sudo asks for the password for initializing a check period of a
  given time N (where N is defined at installation and is set to 5
  minutes by default).


pkgId: 43beb6a0ed029c9325aaa25bec777111b8d8c2d8651e7cad120e4fa9b9987584
name: sudo-rpm
arch: armv7l
version: 1.9.15p5
epoch: 0
release: 0
summary: Script making possible to run RPM as root from inside build
url: http://www.sudo.ws/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sudo-1.9.15p5-0.src.rpm
location_href: armv7l/sudo-rpm-1.9.15p5-0.armv7l.rpm
checksum_type: sha256
description:
  The package will add ALL ALL = (root) NOPASSWD: /usr/bin/rpm to sudoers and
  makes possible to install packages from inside build.


pkgId: 180ee1619141feade225b867310cae8f75d86832618d3c31dacf5cc70676ffb8
name: swig
arch: armv7l
version: 4.0.2
epoch: 0
release: 0
summary: Simplified Wrapper and Interface Generator
url: http://www.swig.org/
rpm_license: GPL-3.0+ and BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/C and C++
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: armv7l/swig-4.0.2-0.armv7l.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.


pkgId: faa16cf89d3285779ae6321a695441745b4bd7b2495d5acce774285777427592
name: swig-doc
arch: noarch
version: 4.0.2
epoch: 0
release: 0
summary: SWIG Manual
url: http://www.swig.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Documentation/Man
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: noarch/swig-doc-4.0.2-0.noarch.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.

  This package contains the SWIG manual.


pkgId: 81ee7b2ee383e797676a63aa9b7faf6d580c400dd2ab1468286b5c0fcd0a90c1
name: swig-examples
arch: armv7l
version: 4.0.2
epoch: 0
release: 0
summary: SWIG example files
url: http://www.swig.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Documentation/Howto
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: armv7l/swig-examples-4.0.2-0.armv7l.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.

  This package contains SWIG examples, useful both for testing and
  understandig SWIG usage.


pkgId: 38b3834dae735e8be91d1f9348996f74a82f0a89748a4987c99c6e7a79ac6e22
name: system-rw-update
arch: armv7l
version: 1.3.0
epoch: 0
release: 0
summary: System RW Update Manager
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: system-rw-update-1.3.0-0.src.rpm
location_href: armv7l/system-rw-update-1.3.0-0.armv7l.rpm
checksum_type: sha256
description:
  System RW update manager provides interface for running platform/application update scripts
  after software is updated to new version which is implemented by using systemd offline update.


pkgId: ec27e7a3af777597de9f64b965031e67c783b212059c368c0f6db98dc13d4209
name: system-servant-profile_common
arch: armv7l
version: 0.2.2
epoch: 0
release: 1
summary: System-servant configured for common profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: system-servant-0.2.2-1.src.rpm
location_href: armv7l/system-servant-profile_common-0.2.2-1.armv7l.rpm
checksum_type: sha256
description:
  System-popup (system-servant) configured for common profile.
  The binary is shared between common/tv.


pkgId: 7cbeac0fce6f068bf24fc037a2737e4aa3e07e4f40d93a475a37b271b998553e
name: systemd
arch: armv7l
version: 244
epoch: 0
release: 0
summary: A System and Service Manager
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+ and GPL-2.0+
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: armv7l/systemd-244-0.armv7l.rpm
checksum_type: sha256
description:
  systemd is a system and service manager for Linux, compatible with
  SysV and LSB init scripts. systemd provides aggressive parallelization
  capabilities, uses socket and D-Bus activation for starting services,
  offers on-demand starting of daemons, keeps track of processes using
  Linux cgroups, supports snapshotting and restoring of the system
  state, maintains mount and automount points and implements an
  elaborate transactional dependency-based service control logic. It can
  work as a drop-in replacement for sysvinit.


pkgId: 0a35576e0a2290cd30e64ca64671dcd9419ca7e2321d3917593b6143f1a553e8
name: systemd-analyze
arch: armv7l
version: 244
epoch: 0
release: 0
summary: Tool for processing systemd profiling information
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: armv7l/systemd-analyze-244-0.armv7l.rpm
checksum_type: sha256
description:
  'systemd-analyze blame' lists which systemd unit needed how much time to finish
  initialization at boot.
  'systemd-analyze plot' renders an SVG visualizing the parallel start of units
  at boot.


pkgId: 247470d131bd47c82cbbe980fa327f8f9dd4a3eb74688ed64f54d706f3e005fd
name: systemd-tests
arch: armv7l
version: 244
epoch: 0
release: 0
summary: Set of tests for sd-bus component
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+ and BSD-2-Clause
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: armv7l/systemd-tests-244-0.armv7l.rpm
checksum_type: sha256
description:
  This package is part of 'dbus-integratnion-tests' framework and contains set of tests
  for sd-bus component (DBUS API C library).


pkgId: 522fbb5dccd4e022a2b7628f6099c35421adb92c033bfedb2f589d50197605c0
name: sz2-devel
arch: armv7l
version: 1.0.1
epoch: 0
release: 0
summary: Development files for libsz2
url: https://gitlab.dkrz.de/k202009/libaec
rpm_license: BSD-2-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: libaec-1.0.1-0.src.rpm
location_href: armv7l/sz2-devel-1.0.1-0.armv7l.rpm
checksum_type: sha256
description:
  Header files for libsz2, a drop-in replacement for the
  SZIP library (http://www.hdfgroup.org/doc_resource/SZIP).


pkgId: 30b4e4b5b521bc89fe4bf2d532b6d03ed41fadffa055cf8655f06e069e6443de
name: tayga
arch: armv7l
version: 0.9.2
epoch: 0
release: 1
summary: Simple, no-fuss NAT64 for Linux
url: http://www.litech.org/tayga/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Tools
rpm_sourcerpm: tayga-0.9.2-1.src.rpm
location_href: armv7l/tayga-0.9.2-1.armv7l.rpm
checksum_type: sha256
description:
  TAYGA is an out-of-kernel stateless NAT64 implementation for Linux that uses
  the TUN driver to exchange IPv4 and IPv6 packets with the kernel.
  It is intended to provide production-quality NAT64 service for networks
  where dedicated NAT64 hardware would be overkill.


pkgId: 8c82dcf716390e818aee0e392d24eb88534743d4768de38b9be034d82a983ab5
name: tcpdump
arch: armv7l
version: 4.9.3
epoch: 0
release: 1
summary: A Packet Sniffer
url: http://www.tcpdump.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Productivity/Networking/Diagnostic
rpm_sourcerpm: tcpdump-4.9.3-1.src.rpm
location_href: armv7l/tcpdump-4.9.3-1.armv7l.rpm
checksum_type: sha256
description:
  This program can "read" all or only certain packets going over the
  ethernet. It can be used to debug specific network problems.


pkgId: 999c425f98b10884cad341516ec88031dd3c4f21fd35d15e61fa9ad8a9c6700a
name: tel-plugin-packetservice-dbinit-profile_common
arch: armv7l
version: 0.4.32
epoch: 0
release: 1
summary: DB Init Script for non-IVI tel-plugin-packetservice
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Telephony/Configuration
rpm_sourcerpm: tel-plugin-packetservice-0.4.32-1.src.rpm
location_href: armv7l/tel-plugin-packetservice-dbinit-profile_common-0.4.32-1.armv7l.rpm
checksum_type: sha256
description:
  Default DB init script for tel-plugin-packetservice installation.
  Common for common/mobile/wearable profiles.


pkgId: 7b6c7d4b7ee6a4241c90b934a1ac70d4ca69d056592715eed930b36bcbb00fb0
name: tizen-debug
arch: armv7l
version: 2.40
epoch: 0
release: 1
summary: libc debug information with .debug_frame section only and ld debug information
rpm_license: LGPL-2.1+ and LGPL-2.1+-with-GCC-exception and GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: tizen-debug-2.40-1.src.rpm
location_href: armv7l/tizen-debug-2.40-1.armv7l.rpm
checksum_type: sha256
description:
  The package contains the libc.so debug library with .debug_frame section only
  which can be helpful during signal frame backtrace.
  Also, the ld.so debug information is included for the debugging convenience.


pkgId: 46117926dc6aaad265df4514998eb063bbb377f3b17b1b0fea8f3f80ab006a6c
name: tlm
arch: armv7l
version: 1.0.3
epoch: 0
release: 1
summary: Login manager for Tizen
url: https://github.com/01org/tlm
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: System/Service
rpm_sourcerpm: tlm-1.0.3-1.src.rpm
location_href: armv7l/tlm-1.0.3-1.armv7l.rpm
checksum_type: sha256
description:
  TLM is a daemon that handles user logins in a multi-user, multi-seat system by
  authenticating the users through PAM, and setting up, launching, and tracking
  user sessions.


pkgId: 66719d46b5ea912b227579334c1054523957ba33859df6d1a0481b65fb0bfb1e
name: tolua++
arch: armv7l
version: 1.0.93
epoch: 0
release: 0
summary: C/C++ with Lua Integration Tool
url: http://www.codenix.com/~tolua/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: tolua++-1.0.93-0.src.rpm
location_href: armv7l/tolua++-1.0.93-0.armv7l.rpm
checksum_type: sha256
description:
  tolua++ is an extended version of tolua, a tool to integrate C/C++ code with
  Lua. tolua++ includes new features oriented to c++ such as:
  * support for std::string as a basic type (this can be turned off by a command
    line option)
  * support for class templates
  as well as other features and bugfixes.


pkgId: 841e50b58140f6e7c1c2bc33109fda8a0716179b3c05550f53720ac7d8435250
name: toybox
arch: armv7l
version: 0.6.0
epoch: 0
release: 1
summary: Single binary providing simplified versions of system commands
url: http://www.landley.net/toybox/
rpm_license: BSD-2.0
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: toybox-0.6.0-1.src.rpm
location_href: armv7l/toybox-0.6.0-1.armv7l.rpm
checksum_type: sha256
description:
  Toybox is a single binary which includes versions of a large number
  of system commands, including a shell.  This package can be very
  useful for recovering from certain types of system failures,
  particularly those involving broken shared libraries.


pkgId: 98d802b8854053b4dabe7c725b78304faba3e6cd133b9c98241ffee366d211ca
name: trust-anchor
arch: armv7l
version: 2.1.2
epoch: 0
release: 0
summary: Trust Anchor API
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Security/Certificate Management
rpm_sourcerpm: trust-anchor-2.1.2-0.src.rpm
location_href: armv7l/trust-anchor-2.1.2-0.armv7l.rpm
checksum_type: sha256
description:
  The package provides trust-anchor which the application can assign
  SSL root certificates for its HTTPS communication.


pkgId: bf7427568bcbbc0e9db0695f13bc868e62d6cf936902b1775dd26384869bfa56
name: tvm-runtime
arch: armv7l
version: 0.7.0
epoch: 0
release: 0
summary: TVM Runtime Library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: tvm-runtime-0.7.0-0.src.rpm
location_href: armv7l/tvm-runtime-0.7.0-0.armv7l.rpm
checksum_type: sha256
description:
  Apache TVM is a compiler stack for deep learning systems. It is designed to close the gap between the productivity-focused deep learning frameworks, and the performance- and efficiency-focused hardware backends. TVM works with deep learning frameworks to provide end to end compilation to different backends.


pkgId: 672897a528720a6e51217861eb304f529ba7a437b2ee0583f632226e4e617ba5
name: typelib-1_0-Atspi-2_0
arch: armv7l
version: 2.44.1
epoch: 0
release: 1
summary: An Accessibility ToolKit -- Introspection bindings
url: http://www.gnome.org/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: at-spi2-core-2.44.1-1.src.rpm
location_href: armv7l/typelib-1_0-Atspi-2_0-2.44.1-1.armv7l.rpm
checksum_type: sha256
description:
  AT-SPI is a general interface for applications to make use of the
  accessibility toolkit. This version is based on dbus.

  This package provides the GObject Introspection bindings for the
  libatspi library.


pkgId: e8be53748b5eac52c8bac36d766674c665788586a624cebdfe3a0a0678b33bd5
name: typelib-Json
arch: armv7l
version: 1.8.0
epoch: 0
release: 0
summary: Introspection bindings for libjson-glib
url: https://wiki.gnome.org/Projects/JsonGlib
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: json-glib-1.8.0-0.src.rpm
location_href: armv7l/typelib-Json-1.8.0-0.armv7l.rpm
checksum_type: sha256
description:
  JSON-GLib provides a parser and a generator GObject classes and various
  wrappers for the complex data types employed by JSON, such as arrays
  and objects.

  This package provides the GObject Introspection bindings for JSON-GLib.


pkgId: 28b0b01e6681b0ac2183ff00e6a0eb742c309ddd0199d5c9cf775237a84100a4
name: typelib-Soup
arch: armv7l
version: 2.72.0
epoch: 0
release: 1
summary: HTTP client/server library for GNOME -- Introspection bindings
url: http://www.gnome.org
rpm_license: LGPL-2.0+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: libsoup-2.72.0-1.src.rpm
location_href: armv7l/typelib-Soup-2.72.0-1.armv7l.rpm
checksum_type: sha256
description:
  Libsoup is an HTTP client/server library for GNOME. It uses GObjects
  and the glib main loop, to integrate well with GNOME applications.

  This package provides the GObject Introspection bindings for libsoup.


pkgId: cca60fb3280de44eadb06e5894333b83a0ad2b7f2a669feb021acfc281a72921
name: u-boot-tools
arch: armv7l
version: 2024.10
epoch: 0
release: 0
summary: Companion tools for Das U-Boot bootloader
url: https://source.denx.de/u-boot/u-boot.git
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Kernel
rpm_sourcerpm: u-boot-2024.10-0.src.rpm
location_href: armv7l/u-boot-tools-2024.10-0.armv7l.rpm
checksum_type: sha256
description:
  This package includes the mkimage program, which allows generation of U-Boot
  images in various formats, and the fw_printenv and fw_setenv programs to read
  and modify U-Boot's environment.


pkgId: d21ae067d4c81b873b61401c0dcf455a83889e010d4c279cb5c956c584700864
name: ug-nfc-efl-profile_common
arch: armv7l
version: 3.1.9
epoch: 0
release: 0
summary: NFC Setting UI for Common (+TV, +IVI)
rpm_license: Flora-1.1
rpm_vendor: tizen
rpm_group: App/Network
rpm_sourcerpm: ug-nfc-efl-3.1.9-0.src.rpm
location_href: armv7l/ug-nfc-efl-profile_common-3.1.9-0.armv7l.rpm
checksum_type: sha256
description:
  NFC Setting UI for common profile. TV/IVI profile may share this if needed.
  Note that as of 2016/10/07, TV/IVI do not include ug-nfc-efl.
  But, for future usage, we assume that they will be based on this profile
  if someone adds ug-nfc-efl for TV/IVI.


pkgId: d66dd99bdb2c007f4d82dcfb92c38bfb21cf9f93166adcf2cf602b5ecd770a72
name: united-service
arch: armv7l
version: 1.2.0
epoch: 0
release: 0
summary: United Service
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: App Framework/Application Core
rpm_sourcerpm: united-service-1.2.0-0.src.rpm
location_href: armv7l/united-service-1.2.0-0.armv7l.rpm
checksum_type: sha256
description:
  United service is to integrate multiple currently independent daemons into one process
  to improve management efficiency, optimize resource usage, and ensure consistency between services.


pkgId: 912416b3a853387680b8825d2039138bd3319a9dccbf4ea635f21d91d3404de2
name: update-desktop-files
arch: noarch
version: 12.1
epoch: 0
release: 0
summary: A Build Tool to Update Desktop Files
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: update-desktop-files-12.1-0.src.rpm
location_href: noarch/update-desktop-files-12.1-0.noarch.rpm
checksum_type: sha256
description:
  This package provides further translations and a shell script to update
  desktop files. It is used by the %tizen_update_desktop_file rpm macro.


pkgId: 613b66a21145d5fce788791186fa483770b9dbee5b3962bd45421c76fcc9ec99
name: upgrade-parse-dynparts
arch: armv7l
version: 10.0.0
epoch: 0
release: 0
summary: Utility needed to parse dynamic partition on-disk format
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: armv7l/upgrade-parse-dynparts-10.0.0-0.armv7l.rpm
checksum_type: sha256
description:
  This package provides utility needed to parse "super" on-disk format, and print
  out necessary device mapper maps, needed to later mount filesystems contained in
  dynamic partition area.


pkgId: b6a0e3ec6f1fdd8c4fd73d0b2ff9d9069c118758ad52a55bd0ea9f8caeee30a6
name: upgrade-resize-dynparts
arch: armv7l
version: 10.0.0
epoch: 0
release: 0
summary: Utility for modification of dynamic partitions size in super metadata
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: armv7l/upgrade-resize-dynparts-10.0.0-0.armv7l.rpm
checksum_type: sha256
description:
  This package provides utility needed to modify metadata of a super partition by
  changing size of dynamic partitions.


pkgId: 96a18ad68c5bb73f918ad757fc46acd1a87081d9f586a41f6a59acefe6829724
name: upgrade-ro
arch: armv7l
version: 10.0.0
epoch: 0
release: 0
summary: Contains all necessary tools to perform RO Upgrade
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: armv7l/upgrade-ro-10.0.0-0.armv7l.rpm
checksum_type: sha256
description:
  Update engine adding all necessary tools, scripts and configuration
  for updating Tizen platform images using delta files as generated by
  upgrade-tools.


pkgId: 0080a4a94e67f47180127f422803969478331ce20ce59aef73076811fa1e545a
name: usb-modeswitch
arch: armv7l
version: 2.2.6
epoch: 0
release: 2
summary: USB Modeswitch gets mobile broadband cards in operational mode
url: http://www.draisberghof.de/usb_modeswitch/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: System/Tools
rpm_sourcerpm: usb-modeswitch-2.2.6-2.src.rpm
location_href: armv7l/usb-modeswitch-2.2.6-2.armv7l.rpm
checksum_type: sha256
description:
  USB Modeswitch brings up your datacard into operational mode. When plugged
  in they identify themselves as cdrom and present some non-Linux compatible
  installation files. This tool deactivates this cdrom-devices and enables
  the real communication device. It supports most devices built and
  sold by Huawei, T-Mobile, Vodafone, Option, ZTE, Novatel.


pkgId: 09bf24b18fc416c9fe93b880bf1ebecc67e753757e608cf4694e3f1d39239556
name: valgrind
arch: armv7l
version: 3.25.0
epoch: 0
release: 0
summary: Memory Management Debugger
url: http://valgrind.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools/Debuggers
rpm_sourcerpm: valgrind-3.25.0-0.src.rpm
location_href: armv7l/valgrind-3.25.0-0.armv7l.rpm
checksum_type: sha256
description:
  Valgrind checks all memory operations in an application, like read,
  write, malloc, new, free, and delete. Valgrind can find uses of
  uninitialized memory, access to already freed memory, overflows,
  illegal stack operations, memory leaks, and any illegal
  new/malloc/free/delete commands. Another program in the package is
  "cachegrind," a profiler based on the valgrind engine.

  To use valgrind you should compile your application with "-g -O0"
  compiler options. Afterwards you can use it with:

  valgrind --tool=memcheck --sloppy-malloc=yes --leak-check=yes
  --db-attach=yes my_application, for example.

  More valgrind options can be listed via "valgrind --help". A
  debugged application runs slower and needs much more memory, but
  is usually still usable. Valgrind is still in development, but it
  has been successfully used to optimize several KDE applications.


pkgId: 49699fe280b3907e7896851d461ef2697d78a7dfdcd2f0bafd731bcf4d265d3d
name: vconf-internal-keys-config-profile_common
arch: armv7l
version: 0.0.194
epoch: 0
release: 0
summary: Configure vconf internal shared keys for common
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.194-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_common-0.0.194-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for common
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 827bc1523171c532c020c7634e68d4e2a542e6cbec1832d7ddf28f20b936099b
name: vconf-internal-keys-config-profile_ivi
arch: armv7l
version: 0.0.194
epoch: 0
release: 0
summary: Configure vconf internal shared keys for ivi
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.194-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_ivi-0.0.194-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for ivi
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 9a2e51fb9328bc63fb80e1dbf1da4ea8fcfc7394ea2203bbf8964babd851a7f8
name: vconf-internal-keys-config-profile_mobile
arch: armv7l
version: 0.0.194
epoch: 0
release: 0
summary: Configure vconf internal shared keys for mobile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.194-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_mobile-0.0.194-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for mobile.
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: bf2a67f9301e3020ab2ae8c5c496aa5e884dc26ef25f1788a4fece97e01bf10c
name: vconf-internal-keys-config-profile_tv
arch: armv7l
version: 0.0.194
epoch: 0
release: 0
summary: Configure vconf internal shared keys for tv
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.194-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_tv-0.0.194-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for tv
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 4ae39d4f086e317eeddef26279e32f6598ff30ebb7fd87325b179bddfc4fd652
name: vconf-internal-keys-config-profile_wearable
arch: armv7l
version: 0.0.194
epoch: 0
release: 0
summary: Configure vconf internal shared keys for wearable
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.194-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_wearable-0.0.194-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for wearable
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 7f2defb36a91077f6e8bbe6f5f64757e50413d49c729d71f53d9ee0ec9d3668e
name: verity-tools
arch: armv7l
version: 2.2
epoch: 0
release: 1
summary: A tool for dm-verity
rpm_license: MIT
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: initrd-2.2-1.src.rpm
location_href: armv7l/verity-tools-2.2-1.armv7l.rpm
checksum_type: sha256
description:
  verityctl tool for dm-verity. Similar with veritysetup of cryptsetup
  but it can handle with verity meta data block.


pkgId: 732749b5e6041fd0d04a1bd4c6f4363e8969c5a129e0b31de2de8a478a3b1970
name: vi
arch: armv7l
version: 050325
epoch: 0
release: 1
summary: The Traditional Vi
url: http://ex-vi.sourceforge.net/
rpm_license: BSD-4-Clause-UC and BSD-4-Clause-Caldera
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: vi-050325-1.src.rpm
location_href: armv7l/vi-050325-1.armv7l.rpm
checksum_type: sha256
description:
  Compared to most of its many clones, the traditional vi is a rather small
  program just with its extremely powerful editing interface, but lacking fancy
  features like multiple undo, multiple screens, or syntax highlighting.
  This port of vi has generally preserved the original style, terminal control,
  and feature set. It adds support for international character sets, including
  multibyte encodings such as UTF-8, and some minor enhancements that were not
  present in BSD vi 3.7, but had been included in later vi versions for System V
  or in POSIX.2.


pkgId: d836a1e5ffd7e9352c48301f4c5a7aa1916b4b26d24ebaa3f3b34e04f78dac52
name: vpx-tools
arch: armv7l
version: 1.12.0
epoch: 0
release: 2
summary: VP8 codec library - Utilities
url: http://www.webmproject.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Multimedia/Libraries
rpm_sourcerpm: libvpx-1.12.0-2.src.rpm
location_href: armv7l/vpx-tools-1.12.0-2.armv7l.rpm
checksum_type: sha256
description:
  This package contains utilities around the vp8 codec sdk.

  WebM is an open, royalty-free, media file format designed for the web.

  WebM defines the file container structure, video and audio formats.
  WebM files consist of video streams compressed with the VP8 video codec
  and audio streams compressed with the Vorbis audio codec.
  The WebM file structure is based on the Matroska container.


pkgId: 423d04b30a2625905cedcdf555e3ccdedd765a0728745f8a6edd1833f43346cc
name: vulkan-loader-devel
arch: armv7l
version: 1.3.296
epoch: 0
release: 0
summary: Development files for vulkan-loader
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-loader-1.3.296-0.src.rpm
location_href: armv7l/vulkan-loader-devel-1.3.296-0.armv7l.rpm
checksum_type: sha256
description:
  The vulkan-loader-devel package contains libraries and header files for
  developing applications that use vulkan-loader.


pkgId: 140133eb6c700aa75002342bef0251a7a922405357a9410c13b8170f808a1884
name: vulkan-utility-libraries
arch: armv7l
version: 1.3.296
epoch: 0
release: 0
summary: Vulkan utility libraries
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-utility-libraries-1.3.296-0.src.rpm
location_href: armv7l/vulkan-utility-libraries-1.3.296-0.armv7l.rpm
checksum_type: sha256
description:
  This repo was created to share code across various Vulkan repositories,
  solving long standing issues for Vulkan SDK developers and users.


pkgId: 331ed65c5c9886a2783ef8a568013ad0503f4e8de33dab4efa1b19149aa6d032
name: vulkan-validation-layers-devel
arch: armv7l
version: 1.3.296
epoch: 0
release: 0
summary: Development files for vulkan-validation-layers
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-validation-layers-1.3.296-0.src.rpm
location_href: armv7l/vulkan-validation-layers-devel-1.3.296-0.armv7l.rpm
checksum_type: sha256
description:
  The vulkan-validation-layers-devel package contains libraries and header files for
  developing applications that use vulkan-validation-layers.


pkgId: 7a7b7b74e677a397932cea2d30921443c8bc7c76e7fb83d0416cfe88e3ebec70
name: wayland-devel
arch: armv7l
version: 1.23.1
epoch: 0
release: 0
summary: Development files for the Wayland Compositor Infrastructure
url: http://wayland.freedesktop.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-1.23.1-0.src.rpm
location_href: armv7l/wayland-devel-1.23.1-0.armv7l.rpm
checksum_type: sha256
description:
  Wayland is a protocol for a compositor to talk to its clients as well
  as a C library implementation of that protocol. The compositor can be
  a standalone display server running on Linux kernel modesetting and
  evdev input devices, an X application, or a wayland client itself.
  The clients can be traditional applications, X servers (rootless or
  fullscreen) or other display servers.

  This package contains all necessary include files and libraries needed
  to develop applications that require these.


pkgId: ffdb2aab0f536d8c4156f874eaed6e842b2df32cc06f9218562f031827494da6
name: wayland-extension-client-devel
arch: armv7l
version: 1.3.73
epoch: 0
release: 0
summary: Client development files for the Wayland Extension Protocol
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.73-0.src.rpm
location_href: armv7l/wayland-extension-client-devel-1.3.73-0.armv7l.rpm
checksum_type: sha256
description:
  wayland-extension is a protocol for tizen window system.

  This package contains all necessary include files and libraries needed
  to develop applications that require these.


pkgId: 5006cc93a33157cdffebc15f8f9c1989a1d7de0edc0ab81d802c783069823a81
name: wayland-extension-server-devel
arch: armv7l
version: 1.3.73
epoch: 0
release: 0
summary: Server development files for the Wayland Extension Protocol
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.73-0.src.rpm
location_href: armv7l/wayland-extension-server-devel-1.3.73-0.armv7l.rpm
checksum_type: sha256
description:
  wayland-extension is a protocol for tizen window system.

  This package contains all necessary include files and libraries needed
  to develop a compositor that require these.


pkgId: 4cfad8e86e1a556cc5a6f5d01ac07a952217ce81cf877d5ef792af3584be73d6
name: wayland-protocols
arch: armv7l
version: 1.3.73
epoch: 0
release: 0
summary: Wayland upstream protocols
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.73-0.src.rpm
location_href: armv7l/wayland-protocols-1.3.73-0.armv7l.rpm
checksum_type: sha256
description:
  wayland-protocols contains Wayland upstream protocols that add functionality not available in the Wayland core protocol


pkgId: 49d00595adb8f048726a5f72d616d21afc06fb14d4af0f7a76e4edf9720ca621
name: wdiff
arch: armv7l
version: 1.2.2
epoch: 0
release: 1
summary: Display Word Differences Between Text Files
url: https://ftp.gnu.org/gnu/wdiff/
rpm_license: GPL-3.0+
rpm_vendor: tizen
rpm_group: Productivity/Text/Utilities
rpm_sourcerpm: wdiff-1.2.2-1.src.rpm
location_href: armv7l/wdiff-1.2.2-1.armv7l.rpm
checksum_type: sha256
description:
  wdiff compares two files and finds which words have been deleted or
  added to old_file to get new_file. A word is considered to be anything
  between whitespace.

  Xwdiff is a handy X Window System front-end, based on Tcl/Tk.


pkgId: c327a5be7249a0b7cd3363c38d1d91203be8f901479472bc5ec0c259ea1a20d4
name: webauthn-ble-manual-tests
arch: armv7l
version: 1.0.8
epoch: 0
release: 1
summary: Adaptation Layer of Web Authentication Service for BLE Authenticator (manual test)
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Security/Development
rpm_sourcerpm: webauthn-ble-1.0.8-1.src.rpm
location_href: armv7l/webauthn-ble-manual-tests-1.0.8-1.armv7l.rpm
checksum_type: sha256
description:
  Adaptation Layer of Web Authentication Service for BLE Authenticator (manual test)
  The webauthn-manual-tests required to use webauthn-image-viewer


pkgId: 473e1c825e18e952f0e12700162c032b1c33394181bef88bd9dc359d65a82ae7
name: webrtc-audio-processing
arch: armv7l
version: 0.3.1
epoch: 0
release: 2
summary: Library for echo cancellation
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: webrtc-audio-processing-0.3.1-2.src.rpm
location_href: armv7l/webrtc-audio-processing-0.3.1-2.armv7l.rpm
checksum_type: sha256
description:
  webrtc-audio-processing is a library derived from Google WebRTC project that
  provides echo cancellation functionality. This library is used by for example
  PulseAudio to provide echo cancellation.


pkgId: 32e45eadb9c3ad92ba7f5e6feb66cf9b7f30a72bfa3dfed15a14c2d6bf52c59c
name: webrtc-audio-processing-devel
arch: armv7l
version: 0.3.1
epoch: 0
release: 2
summary: Development files for webrtc-audio-processing
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: webrtc-audio-processing-0.3.1-2.src.rpm
location_href: armv7l/webrtc-audio-processing-devel-0.3.1-2.armv7l.rpm
checksum_type: sha256
description:
  The webrtc-audio-processing-devel package contains libraries and header
  files for developing applications that use webrtc-audio-processing.


pkgId: a01c62add1f714b84ddc16bca0ee29d394a074214a3fc9a76f08f279a1c7513f
name: wireless-regdb
arch: armv7l
version: 2013.01.11
epoch: 0
release: 0
summary: Linux wireless regulatory database
url: http://wireless.kernel.org/en/developers/Regulatory/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: wireless-regdb-2013.01.11-0.src.rpm
location_href: armv7l/wireless-regdb-2013.01.11-0.armv7l.rpm
checksum_type: sha256
description:
  This package contains the wireless regulatory database used by all
  cfg80211 based Linux wireless drivers. The wireless database being
  used is maintained by John Linville, the Linux wireless kernel maintainer
  http://wireless.kernel.org/en/developers/Regulatory/


pkgId: 74f8412b4153dcb6c78a8d85feb482d2a251f7ad6ab476fb13fd27996c08dedd
name: wpa_supplicant
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: WPA supplicant implementation
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  wpa_supplicant is an implementation of the WPA Supplicant component,
  i.e., the part that runs in the client stations. It implements key
  negotiation with a WPA Authenticator and it controls the roaming and
  IEEE 802.11 authentication/association of the wlan driver.


pkgId: 39e59a865d9c0adabb60ac2633d490dac139bcf71586e774fc8e380f502bf0dc
name: wpa_supplicant-client_tool
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: Text-based client tool for wpa_supplicant and hostapd
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-client_tool-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  Text-based frontend programs for interacting with wpa_supplicant and hostapd.
  It is used to query current status, change configuration,
  trigger events, and request interactive user input.


pkgId: 25c2d845e09e0dd154a280e2af8728db8cdd747a97de64ce5d2b1d0af2119015
name: wpa_supplicant-extension-TM1
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: Extension for mobile TM1
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-extension-TM1-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  Customized wpa_supplicant supporting SPRD-based boards including TM1.
  Having such ifdefs in public Tizen is really ugly, but for the sake
  of backward-compatibility, we have this subpackage. Please remove
  such variations later.


pkgId: 8ad382b91f1b0b973c76f378de1c6907b7c18667aa136584424a5d8777ee1fe5
name: wpa_supplicant-extension-TM2
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: Extension for mobile TM2
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-extension-TM2-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  Customized wpa_supplicant supporting BROADCOM-based boards including TM1.
  Having such ifdefs in public Tizen is really ugly, but for the sake
  of backward-compatibility, we have this subpackage. Please remove
  such variations later.


pkgId: 3153e197c26d944d71af71c0d6729f0d7ce1f0a55a5a737f4c31ce5937550163
name: wpa_supplicant-profile_tv
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: Patched wpa_supplicant for TV
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-profile_tv-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  TV-profile somehow wants to disable WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE
  unconditionally at wpa_supplicant/wpa_supplicant.c. It should later be
  determined at runtime/boottime, not at buildtime.


pkgId: f1e5a3444dca11cc40205a5db9b888bfa5b362af6291414695cfa63b069380e0
name: xdelta3
arch: armv7l
version: 3.0.11
epoch: 0
release: 1
summary: The xdelta3
url: http://xdelta.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: xdelta3-3.0.11-1.src.rpm
location_href: armv7l/xdelta3-3.0.11-1.armv7l.rpm
checksum_type: sha256
description:
  Xdelta3 is a set of tools designed to compute changes between
  binary files.  These changes (delta files) are similar to the output of the
  "diff" program, in that they may be used to store and transmit only the
  changes between files.  The "delta files" that Xdelta3 manages are
  stored in RFC3284 (VCDIFF) format.


pkgId: 368afcebfa3bd59ab1d9b6f50a4b0d449fc02033697cf520be4a47937dc4aafc
name: xkeyboard-config
arch: armv7l
version: 2.13
epoch: 0
release: 0
summary: The X Keyboard Extension
url: http://www.freedesktop.org/Software/XKeyboardConfig
rpm_license: MIT
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: xkeyboard-config-2.13-0.src.rpm
location_href: armv7l/xkeyboard-config-2.13-0.armv7l.rpm
checksum_type: sha256
description:
  The X Keyboard Extension essentially replaces the core protocol
  definition of keyboard. The extension makes possible to clearly and
  explicitly specify most aspects of keyboard behaviour on per-key basis
  and to more closely track the logical and physical state of the
  keyboard. It also includes a number of keyboard controls designed to
  make keyboards more accessible to people with physical impairments.


pkgId: 6247a36b057562176cf06d67402bf919ecd041ad38a2c823441cd475ef77b4b5
name: xml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 0
summary: Common XML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Applications/Text
rpm_sourcerpm: sgml-common-0.6.3-0.src.rpm
location_href: noarch/xml-common-0.6.3-0.noarch.rpm
checksum_type: sha256
description:
  The xml-common is a subpackage of sgml-common which contains
  a collection XML catalogs that are useful for processing XML,
  but that don't need to be included in main package.


pkgId: 4191cbce37b71164cd31ca9ff64d02ad7c20c700f7d508f3574a66997ea8a124
name: xmlto
arch: armv7l
version: 0.0.28
epoch: 0
release: 0
summary: Tool for Converting XML Files to Various Formats
url: https://fedorahosted.org/xmlto/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Productivity/Publishing/XML
rpm_sourcerpm: xmlto-0.0.28-0.src.rpm
location_href: armv7l/xmlto-0.0.28-0.armv7l.rpm
checksum_type: sha256
description:
  This is a package for converting XML files to various formats using XSL
  stylesheets.  As a processor it depends on xsltproc and as a formatter
  for print output it makes use of passivetex.


pkgId: 90f3130bdc990ac92d40415dfede5be0056aaa5d17514dafc5e8e480a9baa817
name: yum
arch: noarch
version: 3.4.3
epoch: 0
release: 0
summary: RPM package installer/updater/manager
url: http://yum.baseurl.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: yum-3.4.3-0.src.rpm
location_href: noarch/yum-3.4.3-0.noarch.rpm
checksum_type: sha256
description:
  Yum is a utility that can check for and automatically download and
  install updated RPM packages. Dependencies are obtained and downloaded
  automatically, prompting the user for permission as necessary.


pkgId: 24ba17db0cfbfc10e060f5917e1bf901883de708533be737fbfd67fc9ca30eb5
name: zbar
arch: armv7l
version: 0.10
epoch: 0
release: 23
summary: Bar code reader
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zbar-0.10-23.src.rpm
location_href: armv7l/zbar-0.10-23.armv7l.rpm
checksum_type: sha256
description:
  A layered barcode scanning and decoding library. Supports EAN, UPC, Code 128,
  Code 39 and Interleaved 2 of 5.
  Includes applications for decoding captured barcode images and using a video
  device (eg, webcam) as a barcode scanner.


pkgId: a8362e359cf3a9be4e0552084cad819dd2af1e82369ebabe45ed2ff60a1291d1
name: zbar-devel
arch: armv7l
version: 0.10
epoch: 0
release: 23
summary: Bar code library extra development files
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zbar-0.10-23.src.rpm
location_href: armv7l/zbar-devel-0.10-23.armv7l.rpm
checksum_type: sha256
description:
  This package contains header files and additional libraries used for
  developing applications that read bar codes with this library.


pkgId: 92513abc30686429419d5fa4ef14398a7043d9ee20e89fde77544e8797808654
name: zint
arch: armv7l
version: 2.6.7
epoch: 0
release: 2
summary: Barcode generator library
url: http://www.zint.org.uk
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zint-2.6.7-2.src.rpm
location_href: armv7l/zint-2.6.7-2.armv7l.rpm
checksum_type: sha256
description:
  Zint is a C library for encoding data in several barcode variants. The
  bundled command-line utility provides a simple interface to the library.
  Features of the library:
  - Over 50 symbologies including all ISO/IEC standards, like QR codes.
  - Unicode translation for symbologies which support Latin-1 and
    Kanji character sets.
  - Full GS1 support including data verification and automated insertion of
    FNC1 characters.
  - Support for encoding binary data including NULL (ASCII 0) characters.
  - Health Industry Barcode (HIBC) encoding capabilities.
  - Output in the following file formats: PNG, GIF, EPS, WMF, BMP, TIF, SVG.
  - Verification stage for SBN, ISBN and ISBN-13 data.


pkgId: 13cdbb2779d45ea00a35765ae8cdf62243f476193d0d4bb8733c01c98a51c436
name: zint-devel
arch: armv7l
version: 2.6.7
epoch: 0
release: 2
summary: Library and header files for zint
url: http://www.zint.org.uk
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zint-2.6.7-2.src.rpm
location_href: armv7l/zint-devel-2.6.7-2.armv7l.rpm
checksum_type: sha256
description:
  C library and header files needed to develop applications that use
  the Zint library. The API documentation can be found on the project website:
  http://www.zint.org.uk/zintSite/Manual.aspx


pkgId: 753bb7bc457e16228e3471e377396a7fa3eab8388e7197471b74d405f0afad0a
name: zypper
arch: armv7l
version: 1.14.38
epoch: 0
release: 0
summary: Command line software manager using libzypp
url: http://en.opensuse.org/Zypper
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Package Management
rpm_sourcerpm: zypper-1.14.38-0.src.rpm
location_href: armv7l/zypper-1.14.38-0.armv7l.rpm
checksum_type: sha256
description:
  Zypper is a command line tool for managing software. It can be used to add
  package repositories, search for packages, install, remove, or update packages,
  install patches, hardware drivers, verify dependencies, and more.

  Zypper can be used interactively or non-interactively by user, from scripts,
  or front-ends.

  Authors:
  --------
      Jan Kupec <jkupec@suse.cz>
      Duncan Mac-Vicar <dmacvicar@suse.de>
      Martin Vidner <mvidner@suse.cz>
      Josef Reidinger <jreidinger@suse.cz>


pkgId: 57bd7020b1731a5261b9e54d32422897fc6979b499fefe5a300eee5c750253ad
name: zypper-tizen-config
arch: noarch
version: 1.14.38
epoch: 0
release: 0
summary: zypper repo configuration for Tizen:Unified developers
url: http://en.opensuse.org/Zypper
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Packages
rpm_sourcerpm: zypper-1.14.38-0.src.rpm
location_href: noarch/zypper-tizen-config-1.14.38-0.noarch.rpm
checksum_type: sha256
description:
  Zypper repo configuration for Tizen:Unified developers.
  This is for Tizen device and platform development.


# files

type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/perf/scripts/python/bin/event_analyzing_sample-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/perf/scripts/python/bin/event_analyzing_sample-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-check-branches.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-get-cpus-script.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale-ftrace.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-recheck-refscale.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-remote-noreap.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/event_analyzing_sample-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/event_analyzing_sample-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/export-to-postgresql-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/export-to-postgresql-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/syscall-counts-by-pid-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/syscall-counts-by-pid-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/config_override.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/console-badness.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kcsan-collapse.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-assign-cpus.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-check-branches.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-get-cpus-script.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale-ftrace.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-refscale.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-scf.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-remote-noreap.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/perf/scripts/python/bin/event_analyzing_sample-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/perf/scripts/python/bin/event_analyzing_sample-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/perf/scripts/python/bin/syscall-counts-by-pid-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/perf/scripts/python/bin/syscall-counts-by-pid-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/coco_labels_list.txt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.2.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.2.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.3.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.3.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_result_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_result_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov10_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov10_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_track_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_obb_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_obb_decoder_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_custom/unittest_filter_custom.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_python3/unittest_filter_python3.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_reload/tensor_filter_reload_test.c


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.2


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/unittest_filter_tensorflow2_lite.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_repo_dynamicity/tensor_repo_dynamic_test.c


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/labels/google_lenet_ncsdk_caffe_1.labels


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/google_lenet_ncsdk_caffe_1.graph


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/invalid_class_custom_converter.py


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v1_1.0_224_quant.invalid


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v1_1.0_224_quant.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v2_1.0_224_quant.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/multi_person_mobilenet_v1_075_float.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/ncnn_models/squeezenet_v1.1.bin


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/ncnn_models/squeezenet_v1.1.param


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/openvino_mobilenetv2-int8-tf-0001.bin


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/openvino_mobilenetv2-int8-tf-0001.xml


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_3x4_two_input_two_output.pt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_3x4_two_input_two_output.pte


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.pt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.pte


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.tflite


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_batched.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_batched_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/bn_channels_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/bn_channels_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/bn_width_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_dilation.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_dilation.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/dropout_0_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/dropout_100_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/dropout_20_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/dropout_20_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/embedding_mixed_double_batch.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/embedding_mixed_single_batch.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/embedding_w32a32_single_batch.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_act.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_seq.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/grucell_reset_after_single_step.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/grucell_reset_after_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/lstm_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/lstmcell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_output_shape.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_output_shape_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_return_attention_scores.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_return_attention_scores_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_single_batch.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_single_batch_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_value_dim.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_value_dim_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_partial.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_partial_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/rnncell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/bidirectional_lstm_single.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/bidirectional_lstm_stacked.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/fc_unroll_stacked_clipped.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/gru_reset_after_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_gru_reset_after_return_sequence.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_gru_reset_after_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_gru_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_gru_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_disable_need_weights.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_kdim_vdim.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_self_attention.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_lstm_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_lstm_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_rnn_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_rnn_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/pooling_avg_same_padding_multi_stride.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/pooling_max_same_padding_multi_stride.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/split_axis2_split_number2.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/split_axis2_split_number4.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/split_axis3_split_number5.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_100.nnmodelgolden


type: file
name:
  /usr/lib/python3.13/site-packages/SCons/Tool/docbook/docbook-xsl-1.76.1/tools/bin/docbook-xsl-update


type: file
name:
  /usr/share/wgt-installer-ut/test_samples/smoke/ManifestDirectInstallMode/smokewgt40/bin/smokewgt40.ManifestDirectInstallMode


type: file
name:
  /usr/share/wgt-installer-ut/test_samples/smoke/ManifestDirectInstallMode_Hybrid/smokehyb12/bin/service2


type: file
name:
  /usr/share/wgt-installer-ut/test_samples/smoke/ManifestDirectInstallMode_Hybrid/smokehyb12/bin/smokehyb12.ManifestDirectInstallModeHybrid


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_none/config.xml


type: dir
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_use_decoration_invalid


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_use_decoration_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_mouse_event_not_bool/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_height_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_height_ood/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_width_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_touch_effect_not_bool/config.xml


