[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.5 [ 0s] Using BUILD_ARCH=riscv64 [ 0s] [ 0s] [ 0s] 9b3d024ddc55 started "build python3-libxml2.spec" at Fri Dec 5 05:19:20 UTC 2025. [ 0s] [ 0s] Building python3-libxml2 for project 'Tizen-Base-Toolchain' repository 'standard' arch 'riscv64' srcmd5 '970d2d0bbdce2b433057d5956cb9196e' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.5/.build-srcdir/python3-libxml2.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.5/.build-srcdir/python3-libxml2.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/5/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.5/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.5/.build-srcdir/python3-libxml2.spec build ... [ 1s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/43] preinstalling libmagic-data... [ 2s] [2/43] preinstalling libncurses... [ 2s] [3/43] preinstalling setup... [ 2s] [4/43] preinstalling filesystem... [ 2s] [5/43] preinstalling glibc... [ 2s] [6/43] preinstalling bash... [ 2s] [7/43] preinstalling diffutils... [ 2s] [8/43] preinstalling grep... [ 3s] [9/43] preinstalling libattr... [ 3s] [10/43] preinstalling libblkid... [ 3s] [11/43] preinstalling libbz2... [ 3s] [12/43] preinstalling libcap... [ 3s] [13/43] preinstalling libfreebl3... [ 3s] [14/43] preinstalling libgcc... [ 3s] [15/43] preinstalling liblua... [ 3s] [16/43] preinstalling liblzma... [ 3s] [17/43] preinstalling libpopt... [ 3s] [18/43] preinstalling libreadline... [ 3s] [19/43] preinstalling libsmack... [ 3s] [20/43] preinstalling libsqlite... [ 3s] [21/43] preinstalling libuuid... [ 3s] [22/43] preinstalling libxcrypt... [ 3s] [23/43] preinstalling libxml2... [ 3s] [24/43] preinstalling libzstd1... [ 3s] [25/43] preinstalling nspr... [ 3s] [26/43] preinstalling sed... [ 3s] [27/43] preinstalling zlib... [ 3s] [28/43] preinstalling clang-accel-x86_64-riscv64... [ 24s] [29/43] preinstalling qemu-accel-x86_64-riscv64... [ 59s] [30/43] preinstalling qemu-linux-user-x86_64-cross... [ 73s] [31/43] preinstalling coreutils... [ 73s] [32/43] preinstalling libacl... [ 73s] [33/43] preinstalling libelf... [ 73s] [34/43] preinstalling libmount... [ 73s] [35/43] preinstalling smack... [ 73s] [36/43] preinstalling bzip2... [ 73s] [37/43] preinstalling libmagic... [ 73s] [38/43] preinstalling tar... [ 73s] [39/43] preinstalling util-linux... [ 74s] [40/43] preinstalling util-linux-su... [ 74s] [41/43] preinstalling nss... [ 74s] [42/43] preinstalling libsoftokn3... [ 74s] [43/43] preinstalling rpm... [ 75s] running qemu-linux-user-x86_64-cross postinstall script [ 75s] running qemu-accel-x86_64-riscv64 postinstall script [ 75s] mv: cannot stat `/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 75s] running clang-accel-x86_64-riscv64 postinstall script [ 75s] running setup postinstall script [ 75s] chroot: failed to run command '': No such file or directory [ 75s] initializing rpm db... [ 76s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 76s] breaking dependency libxcrypt-devel -> glibc-devel [ 76s] cycle: libsoftokn3 -> nss [ 76s] breaking dependency nss -> libsoftokn3 [ 76s] cycle: llvm -> clang [ 76s] breaking dependency llvm -> clang [ 76s] cycle: llvm -> lldb -> clang [ 76s] breaking dependency llvm -> lldb [ 76s] done [ 76s] querying package ids... [ 76s] [1/116] cumulate libmagic-data-5.45-1.10 [ 76s] [2/116] cumulate setup-0.9-1.4 [ 76s] [3/116] cumulate filesystem-3.1-1.1 [ 76s] [4/116] cumulate glibc-2.40-1.11 [ 76s] [5/116] cumulate bash-3.2.57-1.1 [ 76s] [6/116] cumulate cpio-2.8-1.1 [ 76s] [7/116] cumulate diffutils-3.10-1.1 [ 76s] [8/116] cumulate findutils-4.3.8-1.11 [ 76s] [9/116] cumulate gdbm-1.8.3-1.14 [ 76s] [10/116] cumulate hostname-3.23-1.1 [ 76s] [11/116] cumulate libatomic-14.2.0-1.11 [ 76s] [12/116] cumulate libattr-2.5.1-1.11 [ 76s] [13/116] cumulate libblkid-2.39.3-1.12 [ 76s] [14/116] cumulate libbz2-1.0.8-1.9 [ 76s] [15/116] cumulate libcap-2.73-1.12 [ 76s] [16/116] cumulate libexpat-2.6.2-1.12 [ 76s] [17/116] cumulate libffi-3.4.7-1.14 [ 76s] [18/116] cumulate libfreebl3-3.109-1.12 [ 76s] [19/116] cumulate libgcc-14.2.0-1.11 [ 76s] [20/116] cumulate libgomp-14.2.0-1.11 [ 76s] [21/116] cumulate libitm-14.2.0-1.11 [ 76s] [22/116] cumulate libltdl-2.4.7-1.13 [ 76s] [23/116] cumulate liblua-5.1.5-1.10 [ 76s] [24/116] cumulate liblzma-5.6.3-1.11 [ 76s] [25/116] cumulate libopenssl3-3.0.16-1.14 [ 76s] [26/116] cumulate libpcre-8.45-1.11 [ 76s] [27/116] cumulate libpopt-1.16-1.9 [ 76s] [28/116] cumulate libpython3_131_0-3.13.1-1.10 [ 76s] [29/116] cumulate libsmack-1.3.1-1.8 [ 76s] [30/116] cumulate libsmartcols-2.39.3-1.12 [ 76s] [31/116] cumulate libsqlite-3.50.2-1.11 [ 76s] [32/116] cumulate libuuid-2.39.3-1.12 [ 76s] [33/116] cumulate libxcrypt-4.4.36-1.14 [ 76s] [34/116] cumulate libxml2-2.13.5-1.11 [ 76s] [35/116] cumulate libzstd1-1.5.6-1.12 [ 76s] [36/116] cumulate m4-1.4.19-1.1 [ 76s] [37/116] cumulate net-tools-2.0_20121208git-1.9 [ 76s] [38/116] cumulate nspr-4.36-1.10 [ 76s] [39/116] cumulate patch-2.7.6-1.9 [ 76s] [40/116] cumulate pkg-config-0.29.2-1.9 [ 76s] [41/116] cumulate sed-4.1c-1.10 [ 76s] [42/116] cumulate update-alternatives-1.22.2-1.1 [ 76s] [43/116] cumulate which-2.17-1.1 [ 76s] [44/116] cumulate zlib-1.3.1-1.13 [ 76s] [45/116] cumulate build-compare-2023.06.18-1.5 [ 76s] [46/116] cumulate clang-accel-x86_64-riscv64-0.4-1.5 [ 76s] [47/116] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 76s] [48/116] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-2.5 [ 76s] [49/116] cumulate binutils-libs-2.43-1.11 [ 76s] [50/116] cumulate coreutils-6.9-14.4 [ 76s] [51/116] cumulate cpp-14.2.0-1.11 [ 76s] [52/116] cumulate gawk-3.1.5-1.1 [ 76s] [53/116] cumulate gcc-c++-14.2.0-1.11 [ 76s] [54/116] cumulate grep-2.5.2-1.9 [ 76s] [55/116] cumulate libacl-2.3.2-1.10 [ 76s] [56/116] cumulate libelf-0.189-1.12 [ 76s] [57/116] cumulate libgfortran-14.2.0-1.11 [ 76s] [58/116] cumulate libmount-2.39.3-1.12 [ 76s] [59/116] cumulate libstdc++-14.2.0-1.11 [ 76s] [60/116] cumulate make-4.4.1-1.10 [ 76s] [61/116] cumulate nss-certs-3.109-1.12 [ 76s] [62/116] cumulate smack-1.3.1-1.8 [ 76s] [63/116] cumulate xz-devel-5.6.3-1.11 [ 76s] [64/116] cumulate bzip2-1.0.8-1.9 [ 76s] [65/116] cumulate libfdisk-2.39.3-1.12 [ 76s] [66/116] cumulate libmagic-5.45-1.10 [ 76s] [67/116] cumulate xz-5.6.3-1.11 [ 76s] [68/116] cumulate perl-5.38.0-1.10 [ 76s] [69/116] cumulate build-mkbaselibs-20120927-1.1 [ 76s] [70/116] cumulate libstdc++-devel-14.2.0-1.11 [ 76s] [71/116] cumulate linux-glibc-devel-6.6-1.14 [ 76s] [72/116] cumulate binutils-2.43-1.11 [ 76s] [73/116] cumulate tar-1.17-1.1 [ 76s] [74/116] cumulate terminfo-base-full-6.4-1.12 [ 76s] [75/116] cumulate autoconf-2.71-1.14 [ 76s] [76/116] cumulate file-5.45-1.10 [ 76s] [77/116] cumulate glibc-locale-2.40-1.11 [ 76s] [78/116] cumulate gzip-1.3.12-1.10 [ 76s] [79/116] cumulate libcc1-14.2.0-1.11 [ 76s] [80/116] cumulate pam-1.1.6-1.11 [ 76s] [81/116] cumulate tzdata-2024b-1.1 [ 76s] [82/116] cumulate libdw-0.189-1.12 [ 76s] [83/116] cumulate libllvm-21.1.1-3.1 [ 76s] [84/116] cumulate libarchive-3.8.1-1.12 [ 76s] [85/116] cumulate automake-1.16.5-1.13 [ 76s] [86/116] cumulate libasm-0.189-1.12 [ 76s] [87/116] cumulate libncurses5-6.4-1.12 [ 76s] [88/116] cumulate libncurses6-6.4-1.12 [ 76s] [89/116] cumulate build-20120927-1.1 [ 76s] [90/116] cumulate gcc-14.2.0-1.11 [ 76s] [91/116] cumulate libncurses-6.4-1.12 [ 76s] [92/116] cumulate less-668-1.1 [ 76s] [93/116] cumulate libreadline-5.2-1.10 [ 76s] [94/116] cumulate qemu-accel-x86_64-riscv64-0.4-1.5 [ 76s] [95/116] cumulate libtool-2.4.7-1.13 [ 76s] [96/116] cumulate ncurses-devel-6.4-1.12 [ 76s] [97/116] cumulate elfutils-0.189-1.12 [ 76s] [98/116] cumulate readline-devel-5.2-1.10 [ 76s] [99/116] cumulate libxml2-tools-2.13.5-1.11 [ 76s] [100/116] cumulate python3-base-3.13.1-1.10 [ 76s] [101/116] cumulate util-linux-2.39.3-1.12 [ 76s] [102/116] cumulate python3-3.13.1-1.9 [ 76s] [103/116] cumulate util-linux-su-2.39.3-1.12 [ 76s] [104/116] cumulate python3-devel-3.13.1-1.10 [ 76s] [105/116] cumulate libxcrypt-devel-4.4.36-1.14 [ 76s] [106/116] cumulate nss-3.109-1.12 [ 76s] [107/116] cumulate llvm-21.1.1-3.1 [ 76s] [108/116] cumulate glibc-devel-2.40-1.11 [ 76s] [109/116] cumulate libsoftokn3-3.109-1.12 [ 76s] [110/116] cumulate llvm-devel-21.1.1-3.1 [ 76s] [111/116] cumulate clang-21.1.1-3.1 [ 76s] [112/116] cumulate rpm-4.14.1.1-3.3 [ 76s] [113/116] cumulate zlib-devel-1.3.1-1.13 [ 76s] [114/116] cumulate lldb-21.1.1-3.1 [ 76s] [115/116] cumulate rpm-build-4.14.1.1-3.3 [ 76s] [116/116] cumulate libxml2-devel-2.13.5-1.11 [ 76s] now installing cumulated packages [ 110s] Preparing... ######################################## [ 110s] Updating / installing... [ 110s] setup-0.9-1.4 ######################################## [ 110s] filesystem-3.1-1.1 ######################################## [ 111s] glibc-2.40-1.11 ######################################## [ 111s] bash-3.2.57-1.1 ######################################## [ 111s] zlib-1.3.1-1.13 ######################################## [ 113s] coreutils-6.9-14.4 ######################################## [ 113s] libgcc-14.2.0-1.11 ######################################## [ 113s] libstdc++-14.2.0-1.11 ######################################## [ 114s] liblzma-5.6.3-1.11 ######################################## [ 114s] libbz2-1.0.8-1.9 ######################################## [ 115s] libxml2-2.13.5-1.11 ######################################## [ 115s] pkg-config-0.29.2-1.9 ######################################## [ 115s] libelf-0.189-1.12 ######################################## [ 115s] libdw-0.189-1.12 ######################################## [ 122s] libllvm-21.1.1-3.1 ######################################## [ 122s] libxcrypt-4.4.36-1.14 ######################################## [ 122s] libblkid-2.39.3-1.12 ######################################## [ 122s] nspr-4.36-1.10 ######################################## [ 123s] pam-1.1.6-1.11 ######################################## [ 123s] terminfo-base-full-6.4-1.12 ######################################## [ 123s] libncurses6-6.4-1.12 ######################################## [ 123s] libreadline-5.2-1.10 ######################################## [ 124s] gdbm-1.8.3-1.14 ######################################## [ 132s] perl-5.38.0-1.10 ######################################## [ 132s] libfreebl3-3.109-1.12 ######################################## [ 133s] libopenssl3-3.0.16-1.14 ######################################## [ 133s] libpopt-1.16-1.9 ######################################## [ 134s] libpython3_131_0-3.13.1-1.10 ######################################## [ 135s] libsqlite-3.50.2-1.11 ######################################## [ 135s] libuuid-2.39.3-1.12 ######################################## [ 135s] libfdisk-2.39.3-1.12 ######################################## [ 136s] build-mkbaselibs-20120927-1.1 ######################################## [ 136s] libxml2-tools-2.13.5-1.11 ######################################## [ 150s] clang-21.1.1-3.1 ######################################## [ 151s] lldb-21.1.1-3.1 ######################################## [ 157s] llvm-21.1.1-3.1 ######################################## [ 157s] libncurses5-6.4-1.12 ######################################## [ 159s] ncurses-devel-6.4-1.12 ######################################## [ 159s] readline-devel-5.2-1.10 ######################################## [ 159s] nss-certs-3.109-1.12 ######################################## [ 159s] libsoftokn3-3.109-1.12 ######################################## [ 159s] nss-3.109-1.12 ######################################## [ 160s] libmount-2.39.3-1.12 ######################################## [ 160s] libasm-0.189-1.12 ######################################## [ 160s] xz-devel-5.6.3-1.11 ######################################## [ 160s] bzip2-1.0.8-1.9 ######################################## [ 160s] xz-5.6.3-1.11 ######################################## [ 160s] libcc1-14.2.0-1.11 ######################################## [ 160s] libgfortran-14.2.0-1.11 ######################################## [ 161s] linux-glibc-devel-6.6-1.14 ######################################## [ 161s] libxcrypt-devel-4.4.36-1.14 ######################################## [ 162s] glibc-devel-2.40-1.11 ######################################## [ 162s] zlib-devel-1.3.1-1.13 ######################################## [ 162s] gzip-1.3.12-1.10 ######################################## [ 162s] binutils-libs-2.43-1.11 ######################################## [ 165s] binutils-2.43-1.11 ######################################## [ 165s] make-4.4.1-1.10 ######################################## [ 165s] findutils-4.3.8-1.11 ######################################## [ 165s] libatomic-14.2.0-1.11 ######################################## [ 165s] libattr-2.5.1-1.11 ######################################## [ 166s] libacl-2.3.2-1.10 ######################################## [ 166s] tar-1.17-1.1 ######################################## [ 166s] libarchive-3.8.1-1.12 ######################################## [ 166s] libcap-2.73-1.12 ######################################## [ 167s] libexpat-2.6.2-1.12 ######################################## [ 167s] libffi-3.4.7-1.14 ######################################## [ 170s] python3-base-3.13.1-1.10 ######################################## [ 170s] libgomp-14.2.0-1.11 ######################################## [ 170s] libitm-14.2.0-1.11 ######################################## [ 180s] gcc-14.2.0-1.11 ######################################## [ 180s] libltdl-2.4.7-1.13 ######################################## [ 181s] liblua-5.1.5-1.10 ######################################## [ 181s] libpcre-8.45-1.11 ######################################## [ 181s] libsmack-1.3.1-1.8 ######################################## [ 182s] libsmartcols-2.39.3-1.12 ######################################## [ 182s] libzstd1-1.5.6-1.12 ######################################## [ 182s] m4-1.4.19-1.1 ######################################## [ 183s] autoconf-2.71-1.14 ######################################## [ 183s] automake-1.16.5-1.13 ######################################## [ 183s] patch-2.7.6-1.9 ######################################## [ 183s] sed-4.1c-1.10 ######################################## [ 184s] util-linux-2.39.3-1.12 ######################################## [ 184s] libmagic-data-5.45-1.10 ######################################## [ 185s] libmagic-5.45-1.10 ######################################## [ 186s] rpm-4.14.1.1-3.3 ######################################## [ 186s] rpm-build-4.14.1.1-3.3 ######################################## [ 186s] file-5.45-1.10 ######################################## [ 186s] util-linux-su-2.39.3-1.12 ######################################## [ 186s] libtool-2.4.7-1.13 ######################################## [ 186s] smack-1.3.1-1.8 ######################################## [ 186s] grep-2.5.2-1.9 ######################################## [ 216s] qemu-accel-x86_64-riscv64-0.4-1.5 ######################################## [ 217s] python3-3.13.1-1.9 ######################################## [ 217s] python3-devel-3.13.1-1.10 ######################################## [ 217s] build-20120927-1.1 ######################################## [ 217s] libxml2-devel-2.13.5-1.11 ######################################## [ 217s] elfutils-0.189-1.12 ######################################## [ 220s] llvm-devel-21.1.1-3.1 ######################################## [ 220s] libncurses-6.4-1.12 ######################################## [ 220s] less-668-1.1 ######################################## [ 223s] libstdc++-devel-14.2.0-1.11 ######################################## [ 224s] glibc-locale-2.40-1.11 ######################################## [ 224s] tzdata-2024b-1.1 ######################################## [ 228s] cpp-14.2.0-1.11 ######################################## [ 232s] gcc-c++-14.2.0-1.11 ######################################## [ 232s] build-compare-2023.06.18-1.5 ######################################## [ 251s] clang-accel-x86_64-riscv64-0.4-1.5 ######################################## [ 251s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 262s] qemu-linux-user-x86_64-cross-9.2.3.1-2######################################## [ 262s] gawk-3.1.5-1.1 ######################################## [ 262s] cpio-2.8-1.1 ######################################## [ 262s] diffutils-3.10-1.1 ######################################## [ 262s] hostname-3.23-1.1 ######################################## [ 262s] net-tools-2.0_20121208git-1.9 ######################################## [ 262s] update-alternatives-1.22.2-1.1 ######################################## [ 262s] which-2.17-1.1 ######################################## [ 263s] now finalizing build dir... [ 264s] ----------------------------------------------------------------- [ 264s] I have the following modifications for python3-libxml2.spec: [ 264s] 4c4 [ 264s] < Release: 0 [ 264s] --- [ 264s] > Release: 1.5 [ 265s] build target is riscv64-tizen-linux [ 265s] ----------------------------------------------------------------- [ 265s] ----- building python3-libxml2.spec (user abuild) [ 265s] ----------------------------------------------------------------- [ 265s] ----------------------------------------------------------------- [ 265s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=riscv64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/970d2d0bbdce2b433057d5956cb9196e-python3-libxml2' /home/abuild/rpmbuild/SOURCES/python3-libxml2.spec [ 265s] Building target platforms: riscv64-tizen-linux [ 265s] Building for target riscv64-tizen-linux [ 265s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.QkzFA0 [ 265s] + umask 022 [ 265s] + cd /home/abuild/rpmbuild/BUILD [ 265s] + cd /home/abuild/rpmbuild/BUILD [ 265s] + rm -rf python3-libxml2-2.13.5 [ 265s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python3-libxml2-2.13.5.tar.gz [ 265s] + /bin/tar -xof - [ 268s] + STATUS=0 [ 268s] + '[' 0 -ne 0 ']' [ 268s] + cd python3-libxml2-2.13.5 [ 268s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 268s] + echo 'Patch #0 (0001-Bump-to-2.13.5.patch):' [ 268s] Patch #0 (0001-Bump-to-2.13.5.patch): [ 268s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 268s] patching file .gitignore [ 268s] + cp /home/abuild/rpmbuild/SOURCES/python3-libxml2.manifest . [ 268s] + exit 0 [ 268s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.tdgbcn [ 268s] + umask 022 [ 269s] + cd /home/abuild/rpmbuild/BUILD [ 269s] + CFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -mabi=lp64d -march=rv64gc -g -Wformat' [ 269s] + export CFLAGS [ 269s] + CXXFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -mabi=lp64d -march=rv64gc -g -Wformat' [ 269s] + export CXXFLAGS [ 269s] + LDFLAGS=-Wl,-z,relro,--as-needed [ 269s] + export LDFLAGS [ 269s] + cd python3-libxml2-2.13.5 [ 269s] + ref=/usr/lib/rpm [ 269s] + mints=0 [ 269s] + case $(uname -m) in [ 269s] ++ uname -m [ 269s] + mints=20160911 [ 269s] + for s in guess sub [ 269s] ++ find -maxdepth 8 -name config.guess [ 269s] + for s in guess sub [ 269s] ++ find -maxdepth 8 -name config.sub [ 269s] + export AR=llvm-ar RANLIB=llvm-ranlib [ 269s] + AR=llvm-ar [ 269s] + RANLIB=llvm-ranlib [ 269s] + export CC=riscv64-tizen-linux-gnu-clang CXX=riscv64-tizen-linux-gnu-clang++ [ 269s] + CC=riscv64-tizen-linux-gnu-clang [ 269s] + CXX=riscv64-tizen-linux-gnu-clang++ [ 269s] + export 'CFLAGS=-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -mabi=lp64d -march=rv64gc -g -fno-strict-aliasing' [ 269s] + CFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -mabi=lp64d -march=rv64gc -g -fno-strict-aliasing' [ 269s] + export PYTHON=/usr/bin/python3 [ 269s] + PYTHON=/usr/bin/python3 [ 269s] + CFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -mabi=lp64d -march=rv64gc -g -fno-strict-aliasing' [ 269s] + export CFLAGS [ 269s] + CXXFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -mabi=lp64d -march=rv64gc -g -Wformat' [ 269s] + export CXXFLAGS [ 269s] + LDFLAGS=-Wl,-z,relro,--as-needed [ 269s] + export LDFLAGS [ 269s] + ./autogen.sh --build=riscv64-tizen-linux-gnu --host=riscv64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 279s] libtoolize: putting auxiliary files in '.'. [ 279s] libtoolize: copying file './ltmain.sh' [ 279s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 279s] libtoolize: copying file 'm4/libtool.m4' [ 279s] libtoolize: copying file 'm4/ltoptions.m4' [ 279s] libtoolize: copying file 'm4/ltsugar.m4' [ 279s] libtoolize: copying file 'm4/ltversion.m4' [ 279s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 292s] configure.ac:47: installing './compile' [ 292s] configure.ac:12: installing './config.guess' [ 292s] configure.ac:12: installing './config.sub' [ 292s] configure.ac:42: installing './install-sh' [ 292s] configure.ac:42: installing './missing' [ 292s] Makefile.am: installing './depcomp' [ 295s] python/Makefile.am:31: installing './py-compile' [ 295s] checking build system type... riscv64-tizen-linux-gnu [ 295s] checking host system type... riscv64-tizen-linux-gnu [ 295s] checking for a BSD-compatible install... /bin/install -c [ 295s] checking whether build environment is sane... yes [ 295s] checking for a race-free mkdir -p... /bin/mkdir -p [ 295s] checking for gawk... gawk [ 295s] checking whether make sets $(MAKE)... yes [ 295s] checking whether make supports nested variables... yes [ 296s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 296s] checking whether make supports nested variables... (cached) yes [ 296s] checking for riscv64-tizen-linux-gnu-gcc... riscv64-tizen-linux-gnu-clang [ 296s] checking whether the C compiler works... yes [ 296s] checking for C compiler default output file name... a.out [ 296s] checking for suffix of executables... [ 296s] checking whether we are cross compiling... no [ 296s] checking for suffix of object files... o [ 296s] checking whether the compiler supports GNU C... yes [ 296s] checking whether riscv64-tizen-linux-gnu-clang accepts -g... yes [ 296s] checking for riscv64-tizen-linux-gnu-clang option to enable C11 features... none needed [ 297s] checking whether riscv64-tizen-linux-gnu-clang understands -c and -o together... yes [ 297s] checking whether make supports the include directive... yes (GNU style) [ 297s] checking dependency style of riscv64-tizen-linux-gnu-clang... gcc3 [ 297s] checking whether ln -s works... yes [ 297s] checking for tar... /bin/tar [ 297s] checking for perl... /bin/perl [ 297s] checking for wget... /usr/bin/wget [ 297s] checking for xsltproc... /usr/bin/xsltproc [ 297s] checking for riscv64-tizen-linux-gnu-pkg-config... /bin/riscv64-tizen-linux-gnu-pkg-config [ 297s] checking pkg-config is at least version 0.9.0... yes [ 297s] checking how to print strings... printf [ 297s] checking for a sed that does not truncate output... /bin/sed [ 297s] checking for grep that handles long lines and -e... /bin/grep [ 297s] checking for egrep... /bin/grep -E [ 297s] checking for fgrep... /bin/grep -F [ 297s] checking for ld used by riscv64-tizen-linux-gnu-clang... /usr/bin/ld [ 297s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 297s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 297s] checking the name lister (/bin/nm -B) interface... BSD nm [ 297s] checking the maximum length of command line arguments... 1572864 [ 297s] checking how to convert riscv64-tizen-linux-gnu file names to riscv64-tizen-linux-gnu format... func_convert_file_noop [ 297s] checking how to convert riscv64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 297s] checking for /usr/bin/ld option to reload object files... -r [ 297s] checking for riscv64-tizen-linux-gnu-file... no [ 297s] checking for file... file [ 297s] checking for riscv64-tizen-linux-gnu-objdump... no [ 297s] checking for objdump... objdump [ 297s] checking how to recognize dependent libraries... pass_all [ 297s] checking for riscv64-tizen-linux-gnu-dlltool... no [ 297s] checking for dlltool... no [ 297s] checking how to associate runtime and link libraries... printf %s\n [ 297s] checking for riscv64-tizen-linux-gnu-ar... llvm-ar [ 297s] checking for archiver @FILE support... @ [ 297s] checking for riscv64-tizen-linux-gnu-strip... no [ 297s] checking for strip... strip [ 297s] checking for riscv64-tizen-linux-gnu-ranlib... llvm-ranlib [ 297s] checking command to parse /bin/nm -B output from riscv64-tizen-linux-gnu-clang object... ok [ 297s] checking for sysroot... no [ 297s] checking for a working dd... /bin/dd [ 297s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 297s] checking for riscv64-tizen-linux-gnu-mt... no [ 297s] checking for mt... no [ 297s] checking if : is a manifest tool... no [ 297s] checking for stdio.h... yes [ 297s] checking for stdlib.h... yes [ 298s] checking for string.h... yes [ 298s] checking for inttypes.h... yes [ 298s] checking for stdint.h... yes [ 298s] checking for strings.h... yes [ 298s] checking for sys/stat.h... yes [ 298s] checking for sys/types.h... yes [ 298s] checking for unistd.h... yes [ 298s] checking for dlfcn.h... yes [ 298s] checking for objdir... .libs [ 298s] checking if riscv64-tizen-linux-gnu-clang supports -fno-rtti -fno-exceptions... yes [ 298s] checking for riscv64-tizen-linux-gnu-clang option to produce PIC... -fPIC -DPIC [ 298s] checking if riscv64-tizen-linux-gnu-clang PIC flag -fPIC -DPIC works... yes [ 299s] checking if riscv64-tizen-linux-gnu-clang static flag -static works... no [ 299s] checking if riscv64-tizen-linux-gnu-clang supports -c -o file.o... yes [ 299s] checking if riscv64-tizen-linux-gnu-clang supports -c -o file.o... (cached) yes [ 299s] checking whether the riscv64-tizen-linux-gnu-clang linker (/usr/bin/ld) supports shared libraries... yes [ 299s] checking whether -lc should be explicitly linked in... no [ 299s] checking dynamic linker characteristics... GNU/Linux ld.so [ 299s] checking how to hardcode library paths into programs... immediate [ 299s] checking whether stripping libraries is possible... yes [ 299s] checking if libtool supports shared libraries... yes [ 299s] checking whether to build shared libraries... yes [ 299s] checking whether to build static libraries... no [ 299s] checking for cos in -lm... yes [ 299s] checking for stdint.h... (cached) yes [ 299s] checking for fcntl.h... yes [ 299s] checking for unistd.h... (cached) yes [ 299s] checking for sys/stat.h... (cached) yes [ 299s] checking for sys/mman.h... yes [ 299s] checking for sys/time.h... yes [ 299s] checking for sys/timeb.h... yes [ 299s] checking for sys/random.h... yes [ 299s] checking for dl.h... no [ 299s] checking for dlfcn.h... (cached) yes [ 300s] checking for glob.h... yes [ 300s] checking for gettimeofday... yes [ 300s] checking for ftime... yes [ 300s] checking for stat... yes [ 300s] checking for mmap... yes [ 300s] checking for munmap... yes [ 300s] checking for riscv64-tizen-linux-gnu-clang options needed to detect all undeclared functions... none needed [ 300s] checking whether getentropy is declared... yes [ 300s] checking whether __attribute__((destructor)) is accepted... yes [ 300s] checking whether the linker accepts -Wl,--undefined-version... yes [ 301s] checking for python version... 3.13 [ 301s] checking for python platform... linux [ 301s] checking for GNU default python prefix... ${prefix} [ 301s] checking for GNU default python exec_prefix... ${exec_prefix} [ 301s] checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.13/site-packages [ 302s] checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.13/site-packages [ 302s] checking for python-3.13... yes [ 302s] checking for library containing dlopen... none required [ 302s] checking for pthread.h... yes [ 302s] checking for library containing pthread_create... none required [ 302s] checking for libiconv... none required [ 302s] checking that generated files are newer than configure... done [ 302s] configure: creating ./config.status [ 303s] config.status: creating Makefile [ 303s] config.status: creating include/Makefile [ 303s] config.status: creating include/libxml/Makefile [ 303s] config.status: creating include/private/Makefile [ 303s] config.status: creating doc/Makefile [ 303s] config.status: creating doc/devhelp/Makefile [ 303s] config.status: creating example/Makefile [ 303s] config.status: creating fuzz/Makefile [ 303s] config.status: creating python/Makefile [ 303s] config.status: creating python/tests/Makefile [ 303s] config.status: creating xstc/Makefile [ 303s] config.status: creating include/libxml/xmlversion.h [ 303s] config.status: creating libxml-2.0.pc [ 303s] config.status: creating libxml-2.0-uninstalled.pc [ 303s] config.status: creating libxml2-config.cmake [ 303s] config.status: creating python/setup.py [ 303s] config.status: creating xml2-config [ 303s] config.status: creating config.h [ 303s] config.status: executing depfiles commands [ 304s] config.status: executing libtool commands [ 304s] [ 304s] Now type 'make' to compile libxml2. [ 304s] + [[ -e config.sub ]] [ 304s] ++ automake --print-libdir [ 304s] + install -m 0755 /usr/share/automake-1.16/config.sub config.sub [ 304s] + CFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -mabi=lp64d -march=rv64gc -g -fno-strict-aliasing' [ 304s] + export CFLAGS [ 304s] + CXXFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -mabi=lp64d -march=rv64gc -g -Wformat' [ 304s] + export CXXFLAGS [ 304s] + LDFLAGS=-Wl,-z,relro,--as-needed [ 304s] + export LDFLAGS [ 304s] + ./configure --build=riscv64-tizen-linux-gnu --host=riscv64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-fexceptions --with-history --enable-ipv6 --with-sax1 --with-regexps --with-threads --with-reader --with-http [ 305s] configure: WARNING: unrecognized options: --with-fexceptions [ 305s] checking build system type... riscv64-tizen-linux-gnu [ 305s] checking host system type... riscv64-tizen-linux-gnu [ 305s] checking for a BSD-compatible install... /bin/install -c [ 305s] checking whether build environment is sane... yes [ 305s] checking for a race-free mkdir -p... /bin/mkdir -p [ 305s] checking for gawk... gawk [ 305s] checking whether make sets $(MAKE)... yes [ 305s] checking whether make supports nested variables... yes [ 305s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 305s] checking whether make supports nested variables... (cached) yes [ 305s] checking for riscv64-tizen-linux-gnu-gcc... riscv64-tizen-linux-gnu-clang [ 305s] checking whether the C compiler works... yes [ 305s] checking for C compiler default output file name... a.out [ 305s] checking for suffix of executables... [ 305s] checking whether we are cross compiling... no [ 305s] checking for suffix of object files... o [ 305s] checking whether the compiler supports GNU C... yes [ 305s] checking whether riscv64-tizen-linux-gnu-clang accepts -g... yes [ 305s] checking for riscv64-tizen-linux-gnu-clang option to enable C11 features... none needed [ 305s] checking whether riscv64-tizen-linux-gnu-clang understands -c and -o together... yes [ 305s] checking whether make supports the include directive... yes (GNU style) [ 306s] checking dependency style of riscv64-tizen-linux-gnu-clang... gcc3 [ 306s] checking whether ln -s works... yes [ 306s] checking for tar... /bin/tar [ 306s] checking for perl... /bin/perl [ 306s] checking for wget... /usr/bin/wget [ 306s] checking for xsltproc... /usr/bin/xsltproc [ 306s] checking for riscv64-tizen-linux-gnu-pkg-config... /bin/riscv64-tizen-linux-gnu-pkg-config [ 306s] checking pkg-config is at least version 0.9.0... yes [ 306s] checking how to print strings... printf [ 306s] checking for a sed that does not truncate output... /bin/sed [ 306s] checking for grep that handles long lines and -e... /bin/grep [ 306s] checking for egrep... /bin/grep -E [ 306s] checking for fgrep... /bin/grep -F [ 306s] checking for ld used by riscv64-tizen-linux-gnu-clang... /usr/bin/ld [ 306s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 306s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 306s] checking the name lister (/bin/nm -B) interface... BSD nm [ 306s] checking the maximum length of command line arguments... 1572864 [ 306s] checking how to convert riscv64-tizen-linux-gnu file names to riscv64-tizen-linux-gnu format... func_convert_file_noop [ 306s] checking how to convert riscv64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 306s] checking for /usr/bin/ld option to reload object files... -r [ 306s] checking for riscv64-tizen-linux-gnu-file... no [ 306s] checking for file... file [ 306s] checking for riscv64-tizen-linux-gnu-objdump... no [ 306s] checking for objdump... objdump [ 306s] checking how to recognize dependent libraries... pass_all [ 306s] checking for riscv64-tizen-linux-gnu-dlltool... no [ 306s] checking for dlltool... no [ 306s] checking how to associate runtime and link libraries... printf %s\n [ 306s] checking for riscv64-tizen-linux-gnu-ar... llvm-ar [ 306s] checking for archiver @FILE support... @ [ 306s] checking for riscv64-tizen-linux-gnu-strip... no [ 306s] checking for strip... strip [ 306s] checking for riscv64-tizen-linux-gnu-ranlib... llvm-ranlib [ 306s] checking command to parse /bin/nm -B output from riscv64-tizen-linux-gnu-clang object... ok [ 306s] checking for sysroot... no [ 306s] checking for a working dd... /bin/dd [ 306s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 306s] checking for riscv64-tizen-linux-gnu-mt... no [ 306s] checking for mt... no [ 306s] checking if : is a manifest tool... no [ 306s] checking for stdio.h... yes [ 306s] checking for stdlib.h... yes [ 306s] checking for string.h... yes [ 306s] checking for inttypes.h... yes [ 306s] checking for stdint.h... yes [ 306s] checking for strings.h... yes [ 306s] checking for sys/stat.h... yes [ 306s] checking for sys/types.h... yes [ 306s] checking for unistd.h... yes [ 306s] checking for dlfcn.h... yes [ 306s] checking for objdir... .libs [ 306s] checking if riscv64-tizen-linux-gnu-clang supports -fno-rtti -fno-exceptions... yes [ 306s] checking for riscv64-tizen-linux-gnu-clang option to produce PIC... -fPIC -DPIC [ 306s] checking if riscv64-tizen-linux-gnu-clang PIC flag -fPIC -DPIC works... yes [ 306s] checking if riscv64-tizen-linux-gnu-clang static flag -static works... no [ 306s] checking if riscv64-tizen-linux-gnu-clang supports -c -o file.o... yes [ 306s] checking if riscv64-tizen-linux-gnu-clang supports -c -o file.o... (cached) yes [ 307s] checking whether the riscv64-tizen-linux-gnu-clang linker (/usr/bin/ld) supports shared libraries... yes [ 307s] checking whether -lc should be explicitly linked in... no [ 307s] checking dynamic linker characteristics... GNU/Linux ld.so [ 307s] checking how to hardcode library paths into programs... immediate [ 307s] checking whether stripping libraries is possible... yes [ 307s] checking if libtool supports shared libraries... yes [ 307s] checking whether to build shared libraries... yes [ 307s] checking whether to build static libraries... no [ 307s] checking for cos in -lm... yes [ 307s] checking for stdint.h... (cached) yes [ 307s] checking for fcntl.h... yes [ 307s] checking for unistd.h... (cached) yes [ 307s] checking for sys/stat.h... (cached) yes [ 307s] checking for sys/mman.h... yes [ 307s] checking for sys/time.h... yes [ 307s] checking for sys/timeb.h... yes [ 307s] checking for sys/random.h... yes [ 307s] checking for dl.h... no [ 307s] checking for dlfcn.h... (cached) yes [ 307s] checking for glob.h... yes [ 307s] checking for gettimeofday... yes [ 308s] checking for ftime... yes [ 308s] checking for stat... yes [ 308s] checking for mmap... yes [ 308s] checking for munmap... yes [ 308s] checking for riscv64-tizen-linux-gnu-clang options needed to detect all undeclared functions... none needed [ 308s] checking whether getentropy is declared... yes [ 308s] checking for sys/socket.h... yes [ 308s] checking for netinet/in.h... yes [ 308s] checking for arpa/inet.h... yes [ 308s] checking for netdb.h... yes [ 308s] checking for sys/select.h... yes [ 308s] checking for poll.h... yes [ 309s] checking for library containing gethostbyname... none required [ 309s] checking for library containing connect... none required [ 309s] checking for type of socket length (socklen_t)... socklen_t * [ 309s] checking whether to enable IPv6... yes [ 309s] checking whether __attribute__((destructor)) is accepted... yes [ 309s] checking whether the linker accepts -Wl,--undefined-version... yes [ 309s] Enabling HTTP support [ 309s] checking for python version... 3.13 [ 310s] checking for python platform... linux [ 310s] checking for GNU default python prefix... ${prefix} [ 310s] checking for GNU default python exec_prefix... ${exec_prefix} [ 310s] checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.13/site-packages [ 310s] checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.13/site-packages [ 311s] checking for python-3.13... yes [ 311s] checking for library containing dlopen... none required [ 311s] checking for pthread.h... yes [ 311s] checking for library containing pthread_create... none required [ 311s] Enabling xmllint shell history [ 311s] checking for tputs in -lncurses... no [ 311s] checking for tputs in -lcurses... no [ 311s] checking for tputs in -ltermcap... no [ 311s] checking for tputs in -lterminfo... no [ 312s] checking for tputs in -ltermlib... no [ 312s] checking for readline/history.h... yes [ 312s] checking for append_history in -lhistory... yes [ 312s] checking for readline/readline.h... yes [ 312s] checking for readline in -lreadline... yes [ 312s] checking for libiconv... none required [ 312s] checking that generated files are newer than configure... done [ 312s] configure: creating ./config.status [ 313s] config.status: creating Makefile [ 313s] config.status: creating include/Makefile [ 313s] config.status: creating include/libxml/Makefile [ 313s] config.status: creating include/private/Makefile [ 313s] config.status: creating doc/Makefile [ 313s] config.status: creating doc/devhelp/Makefile [ 313s] config.status: creating example/Makefile [ 313s] config.status: creating fuzz/Makefile [ 313s] config.status: creating python/Makefile [ 313s] config.status: creating python/tests/Makefile [ 313s] config.status: creating xstc/Makefile [ 313s] config.status: creating include/libxml/xmlversion.h [ 313s] config.status: creating libxml-2.0.pc [ 313s] config.status: creating libxml-2.0-uninstalled.pc [ 313s] config.status: creating libxml2-config.cmake [ 313s] config.status: creating python/setup.py [ 313s] config.status: creating xml2-config [ 313s] config.status: creating config.h [ 313s] config.status: executing depfiles commands [ 314s] config.status: executing libtool commands [ 314s] configure: WARNING: unrecognized options: --with-fexceptions [ 314s] + mkdir .libs [ 314s] + cp -v /usr/lib64/libxml2.la . [ 314s] `/usr/lib64/libxml2.la' -> `./libxml2.la' [ 314s] + make -C python -j12 [ 314s] make: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 314s] /usr/bin/python3 ./generator.py . [ 315s] Found 1644 functions in libxml2-api.xml [ 315s] Found 53 functions in libxml2-python-api.xml [ 315s] Generated 894 wrapper functions, 593 failed, 210 skipped [ 315s] make all-recursive [ 315s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 315s] Making all in . [ 315s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 315s] CC libxml.lo [ 316s] CC types.lo [ 316s] CC libxml2-py.lo [ 318s] CCLD libxml2mod.la [ 318s] cat ./libxml.py `test -f libxml2class.py || echo ./`libxml2class.py > libxml2.py [ 318s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 318s] Making all in tests [ 318s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 318s] make[2]: Nothing to be done for 'all'. [ 318s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 318s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 318s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 318s] + exit 0 [ 318s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.gzWxvJ [ 318s] + umask 022 [ 318s] + cd /home/abuild/rpmbuild/BUILD [ 318s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64 [ 318s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64 [ 318s] + cd python3-libxml2-2.13.5 [ 318s] + export AR=llvm-ar RANLIB=llvm-ranlib [ 318s] + AR=llvm-ar [ 318s] + RANLIB=llvm-ranlib [ 318s] + export CC=riscv64-tizen-linux-gnu-clang CXX=riscv64-tizen-linux-gnu-clang++ [ 318s] + CC=riscv64-tizen-linux-gnu-clang [ 318s] + CXX=riscv64-tizen-linux-gnu-clang++ [ 318s] + make -C python install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64 pythondir=/usr/lib/python3.13/site-packages PYTHON_SITE_PACKAGES=/usr/lib/python3.13/site-packages [ 318s] make: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 318s] make install-recursive [ 318s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 318s] Making install in . [ 319s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 319s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 319s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib64/python3.13/site-packages' [ 319s] /bin/sh ../libtool --mode=install /bin/install -c libxml2mod.la '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib64/python3.13/site-packages' [ 319s] libtool: install: /bin/install -c .libs/libxml2mod.so /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib64/python3.13/site-packages/libxml2mod.so [ 319s] libtool: install: /bin/install -c .libs/libxml2mod.lai /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib64/python3.13/site-packages/libxml2mod.la [ 319s] libtool: warning: remember to run 'libtool --finish /usr/lib64/python3.13/site-packages' [ 319s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib/python3.13/site-packages' [ 319s] /bin/install -c -m 644 libxml2.py '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib/python3.13/site-packages' [ 319s] Byte-compiling python modules... [ 320s] libxml2.py [ 320s] Byte-compiling python modules (optimized versions) ... [ 321s] libxml2.py [ 321s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib/python3.13/site-packages' [ 321s] /bin/install -c -m 644 drv_libxml2.py '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib/python3.13/site-packages' [ 321s] Byte-compiling python modules... [ 321s] drv_libxml2.py [ 321s] Byte-compiling python modules (optimized versions) ... [ 321s] drv_libxml2.py [ 321s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 321s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 321s] Making install in tests [ 321s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 321s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 321s] make[3]: Nothing to be done for 'install-exec-am'. [ 321s] make[3]: Nothing to be done for 'install-data-am'. [ 321s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 321s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 321s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 321s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 321s] + chmod a-x python/tests/attribs.py python/tests/build.py python/tests/compareNodes.py python/tests/ctxterror.py python/tests/cutnpaste.py python/tests/dtdvalid.py python/tests/error.py python/tests/inbuf.py python/tests/indexes.py python/tests/input_callback.py python/tests/nsdel.py python/tests/outbuf.py python/tests/push.py python/tests/pushSAX.py python/tests/pushSAXhtml.py python/tests/reader.py python/tests/reader2.py python/tests/reader3.py python/tests/reader4.py python/tests/reader5.py python/tests/reader6.py python/tests/reader7.py python/tests/reader8.py python/tests/readererr.py python/tests/readernext.py python/tests/regexp.py python/tests/relaxng.py python/tests/resolver.py python/tests/schema.py python/tests/serialize.py python/tests/setup_test.py python/tests/sync.py python/tests/thread2.py python/tests/tst.py python/tests/tstLastError.py python/tests/tstURI.py python/tests/tstmem.py python/tests/tstxpath.py python/tests/validDTD.py python/tests/validRNG.py python/tests/validSchemas.py python/tests/validate.py python/tests/walker.py python/tests/xpath.py python/tests/xpathext.py python/tests/xpathleak.py python/tests/xpathns.py python/tests/xpathret.py [ 322s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/share/doc [ 322s] + rm -f /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib64/python3.13/site-packages/libxml2mod.la '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib64/python3.13/site-packages/*.a' [ 322s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.13.5-1.5 --unique-debug-src-base python3-libxml2-2.13.5-1.5.riscv64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 322s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib64/python3.13/site-packages/libxml2mod.so [ 322s] *** WARNING: No build ID note found in /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib64/python3.13/site-packages/libxml2mod.so [ 322s] 2154 blocks [ 322s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python3-libxml2-debuginfo.manifest [ 322s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python3-libxml2-debugsource.manifest [ 322s] + /usr/lib/rpm/check-buildroot [ 322s] + /usr/lib/rpm//brp-compress [ 322s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 322s] + /usr/lib/rpm/brp-python-hardlink [ 323s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64 [ 323s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/isu.list [ 323s] ~/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64 ~/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 323s] ~/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 323s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 323s] Processing files: python3-libxml2-2.13.5-1.5.riscv64 [ 323s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 323s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 323s] [ 323s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.4DGaRY [ 323s] + umask 022 [ 323s] + cd /home/abuild/rpmbuild/BUILD [ 323s] + cd python3-libxml2-2.13.5 [ 323s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/share/doc/packages/python3-libxml2 [ 323s] + export LC_ALL=C [ 323s] + LC_ALL=C [ 323s] + export DOCDIR [ 323s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/share/doc/packages/python3-libxml2 [ 323s] + cp -pr python/libxml2class.txt /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/share/doc/packages/python3-libxml2 [ 323s] + cp -pr python/tests /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/share/doc/packages/python3-libxml2 [ 323s] + exit 0 [ 323s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.RReOKB [ 323s] + umask 022 [ 323s] + cd /home/abuild/rpmbuild/BUILD [ 323s] + cd python3-libxml2-2.13.5 [ 323s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/share/licenses/python3-libxml2 [ 323s] + export LC_ALL=C [ 323s] + LC_ALL=C [ 323s] + export LICENSEDIR [ 323s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/share/licenses/python3-libxml2 [ 323s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/share/licenses/python3-libxml2 [ 323s] + exit 0 [ 323s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib64/python3.13/site-packages/libxml2mod.so [ 323s] Provides: libxml2-python3 = 2.13.5 libxml2mod.so()(64bit) python3-libxml2 = 2.13.5-1.5 python3-libxml2(riscv-64) = 2.13.5-1.5 [ 323s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 323s] Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libc.so.6(GLIBC_2.28)(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.5.0)(64bit) libxml2.so.2(LIBXML2_2.5.2)(64bit) libxml2.so.2(LIBXML2_2.5.4)(64bit) libxml2.so.2(LIBXML2_2.5.6)(64bit) libxml2.so.2(LIBXML2_2.5.7)(64bit) libxml2.so.2(LIBXML2_2.5.8)(64bit) libxml2.so.2(LIBXML2_2.5.9)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) libxml2.so.2(LIBXML2_2.6.1)(64bit) libxml2.so.2(LIBXML2_2.6.10)(64bit) libxml2.so.2(LIBXML2_2.6.11)(64bit) libxml2.so.2(LIBXML2_2.6.12)(64bit) libxml2.so.2(LIBXML2_2.6.14)(64bit) libxml2.so.2(LIBXML2_2.6.15)(64bit) libxml2.so.2(LIBXML2_2.6.16)(64bit) libxml2.so.2(LIBXML2_2.6.17)(64bit) libxml2.so.2(LIBXML2_2.6.18)(64bit) libxml2.so.2(LIBXML2_2.6.2)(64bit) libxml2.so.2(LIBXML2_2.6.20)(64bit) libxml2.so.2(LIBXML2_2.6.21)(64bit) libxml2.so.2(LIBXML2_2.6.23)(64bit) libxml2.so.2(LIBXML2_2.6.25)(64bit) libxml2.so.2(LIBXML2_2.6.27)(64bit) libxml2.so.2(LIBXML2_2.6.28)(64bit) libxml2.so.2(LIBXML2_2.6.3)(64bit) libxml2.so.2(LIBXML2_2.6.5)(64bit) libxml2.so.2(LIBXML2_2.6.6)(64bit) libxml2.so.2(LIBXML2_2.6.8)(64bit) libxml2.so.2(LIBXML2_2.7.0)(64bit) libxml2.so.2(LIBXML2_2.7.3)(64bit) libxml2.so.2(LIBXML2_2.8.0)(64bit) libxml2.so.2(LIBXML2_2.9.0)(64bit) libxml2.so.2(LIBXML2_2.9.1)(64bit) libxml2.so.2(LIBXML2_2.9.11)(64bit) rtld(GNU_HASH) [ 323s] Obsoletes: libxml2-python3 < 2.13.5 [ 323s] Processing files: python3-libxml2-debugsource-2.13.5-1.5.riscv64 [ 323s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 323s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 323s] [ 323s] Provides: python3-libxml2-debugsource = 2.13.5-1.5 python3-libxml2-debugsource(riscv-64) = 2.13.5-1.5 [ 323s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 323s] Processing files: python3-libxml2-debuginfo-2.13.5-1.5.riscv64 [ 323s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 323s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 323s] [ 323s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64/usr/lib/debug/usr/lib64/python3.13/site-packages/libxml2mod.so.debug [ 323s] Provides: python3-libxml2-debuginfo = 2.13.5-1.5 python3-libxml2-debuginfo(riscv-64) = 2.13.5-1.5 [ 323s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 323s] Recommends: python3-libxml2-debugsource(riscv-64) = 2.13.5-1.5 [ 323s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64 [ 324s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-libxml2-2.13.5-1.5.src.rpm [ 324s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/python3-libxml2-2.13.5-1.5.riscv64.rpm [ 324s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/python3-libxml2-debugsource-2.13.5-1.5.riscv64.rpm [ 324s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/python3-libxml2-debuginfo-2.13.5-1.5.riscv64.rpm [ 324s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.DSNg8S [ 324s] + umask 022 [ 324s] + cd /home/abuild/rpmbuild/BUILD [ 324s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64 [ 324s] + cd python3-libxml2-2.13.5 [ 324s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.5.riscv64 [ 324s] + exit 0 [ 325s] ... checking for files with abuild user/group [ 325s] ... creating baselibs [ 325s] ... comparing built packages with the former built [ 325s] /usr/lib/build/pkg-diff.sh [ 325s] compare /.build.oldpackages/python3-libxml2-2.13.5-1.4.src.rpm /home/abuild/rpmbuild/SRPMS/python3-libxml2-2.13.5-1.5.src.rpm [ 325s] This is not a prerelease project. Compare the project name. [ 325s] comparing disturl_distribution [ 325s] comparing the rpm tags of python3-libxml2 [ 325s] --- old-rpm-tags [ 325s] +++ new-rpm-tags [ 325s] @@ -90 +90 @@ [ 325s] -python3-libxml2.spec 8a44787c247d1da5d2ee1f30f0f6ee35025b2c5c8c12bd31ca0d3a537f2ac358 32 [ 325s] +python3-libxml2.spec 14d451b7446b39622aa463734c30ed32f626096565a5edef69b4ecac97e0e4ac 32 [ 325s] comparing rpmtags [ 325s] comparing RELEASE [ 326s] comparing PROVIDES [ 326s] comparing scripts [ 326s] comparing filelist [ 326s] comparing file checksum [ 326s] compare /.build.oldpackages/python3-libxml2-2.13.5-1.4.riscv64.rpm /home/abuild/rpmbuild/RPMS/riscv64/python3-libxml2-2.13.5-1.5.riscv64.rpm [ 326s] Comparing python3-libxml2-2.13.5-1.4.riscv64.rpm to python3-libxml2-2.13.5-1.5.riscv64.rpm [ 326s] This is not a prerelease project. Compare the project name. [ 326s] comparing disturl_distribution [ 327s] comparing the rpm tags of python3-libxml2 [ 327s] --- old-rpm-tags [ 327s] +++ new-rpm-tags [ 327s] @@ -201,4 +201,4 @@ [ 327s] -/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.opt-1.pyc af7647ebeabfaedfe3462414db67a983a28b02686a5863a095a0e707ff25ad1e 0 [ 327s] -/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.pyc af7647ebeabfaedfe3462414db67a983a28b02686a5863a095a0e707ff25ad1e 0 [ 327s] -/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.opt-1.pyc 3dd2380f3da56d41ce06a6c1fc40d04527cc3cc442b23777ea62eb9a83250940 0 [ 327s] -/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.pyc 3dd2380f3da56d41ce06a6c1fc40d04527cc3cc442b23777ea62eb9a83250940 0 [ 327s] +/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.opt-1.pyc 4e6a06b9a7a7d263e6905df23b8d31236a12bb2820d21b556958faa62584a416 0 [ 327s] +/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.pyc 4e6a06b9a7a7d263e6905df23b8d31236a12bb2820d21b556958faa62584a416 0 [ 327s] +/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.opt-1.pyc 2ef6210a71e7eda5bea11c865ffd59a3415037786f4767fd5a1b3d71c0c4b804 0 [ 327s] +/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.pyc 2ef6210a71e7eda5bea11c865ffd59a3415037786f4767fd5a1b3d71c0c4b804 0 [ 327s] @@ -207 +207 @@ [ 327s] -/usr/lib64/python3.13/site-packages/libxml2mod.so 582d496b2c8e8731fb8c3d465cf23665a4c8c748dc9ab8b6f5f6838ef3578e05 0 [ 327s] +/usr/lib64/python3.13/site-packages/libxml2mod.so 55bb979bfdddec8166a800645d31fe3275a9afbd193c2b8c09d9eaa208dc70c4 0 [ 327s] @@ -211 +211 @@ [ 327s] -/usr/share/doc/packages/python3-libxml2/tests/Makefile 601a1a7f595078eab8f75d60ef59f97e899b8dbff97982770f2579c66d88be62 2 [ 327s] +/usr/share/doc/packages/python3-libxml2/tests/Makefile d62aaf4e57849307afa63d565985ead3aac9b783d3411aafe1df19f78fa860ce 2 [ 327s] @@ -274 +274 @@ [ 327s] -python3-libxml2-2.13.5-1.4.src.rpm [ 327s] +python3-libxml2-2.13.5-1.5.src.rpm [ 327s] comparing rpmtags [ 327s] comparing RELEASE [ 327s] comparing PROVIDES [ 327s] comparing scripts [ 327s] comparing filelist [ 327s] comparing file checksum [ 327s] creating rename script [ 327s] RPM file checksum differs. [ 327s] Extracting packages [ 328s] /usr/share/doc/packages/python3-libxml2/tests/Makefile differs (ASCII text) [ 328s] --- old//usr/share/doc/packages/python3-libxml2/tests/Makefile 2025-12-03 02:42:55.000000000 +0900 [ 328s] +++ new//usr/share/doc/packages/python3-libxml2/tests/Makefile 2025-12-05 14:24:33.000000000 +0900 [ 328s] @@ -221,7 +221,7 @@ [ 328s] RANLIB = llvm-ranlib [ 328s] RDL_CFLAGS = [ 328s] RDL_LIBS = -lreadline -lhistory [ 328s] -RELDATE = Tue Dec 2 2025 [ 328s] +RELDATE = Fri Dec 5 2025 [ 328s] SED = /bin/sed [ 328s] SET_MAKE = [ 328s] SHELL = /bin/sh [ 328s] compare /.build.oldpackages/python3-libxml2-debuginfo-2.13.5-1.4.riscv64.rpm /home/abuild/rpmbuild/RPMS/riscv64/python3-libxml2-debuginfo-2.13.5-1.5.riscv64.rpm [ 328s] skipping -debuginfo package [ 328s] compare /.build.oldpackages/python3-libxml2-debugsource-2.13.5-1.4.riscv64.rpm /home/abuild/rpmbuild/RPMS/riscv64/python3-libxml2-debugsource-2.13.5-1.5.riscv64.rpm [ 328s] Comparing python3-libxml2-debugsource-2.13.5-1.4.riscv64.rpm to python3-libxml2-debugsource-2.13.5-1.5.riscv64.rpm [ 328s] This is not a prerelease project. Compare the project name. [ 328s] comparing disturl_distribution [ 328s] comparing the rpm tags of python3-libxml2-debugsource [ 328s] --- old-rpm-tags [ 328s] +++ new-rpm-tags [ 328s] @@ -170 +170 @@ [ 328s] -python3-libxml2-2.13.5-1.4.src.rpm [ 328s] +python3-libxml2-2.13.5-1.5.src.rpm [ 328s] comparing rpmtags [ 328s] comparing RELEASE [ 328s] comparing PROVIDES [ 328s] comparing scripts [ 329s] comparing filelist [ 329s] comparing file checksum [ 329s] creating rename script [ 329s] RPM meta information is identical [ 329s] No rpmlint.log available [ 329s] [ 329s] 9b3d024ddc55 finished "build python3-libxml2.spec" at Fri Dec 5 05:24:49 UTC 2025. [ 329s]