[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2 [ 0s] Using BUILD_ARCH=riscv64 [ 0s] [ 1s] [ 1s] 06a7e1edff13 started "build python3-libxml2.spec" at Fri Dec 26 06:10:48 UTC 2025. [ 1s] [ 1s] Building python3-libxml2 for project 'Tizen-Base-X' repository 'standard' arch 'riscv64' srcmd5 '970d2d0bbdce2b433057d5956cb9196e' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build-srcdir/python3-libxml2.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build-srcdir/python3-libxml2.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build-srcdir/python3-libxml2.spec build ... [ 2s] registering binfmt handlers for cross build [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/43] preinstalling libmagic-data... [ 3s] [2/43] preinstalling libncurses... [ 3s] [3/43] preinstalling setup... [ 3s] [4/43] preinstalling filesystem... [ 3s] [5/43] preinstalling glibc... [ 3s] [6/43] preinstalling bash... [ 3s] [7/43] preinstalling diffutils... [ 3s] [8/43] preinstalling grep... [ 3s] [9/43] preinstalling libattr... [ 3s] [10/43] preinstalling libblkid... [ 3s] [11/43] preinstalling libbz2... [ 3s] [12/43] preinstalling libcap... [ 3s] [13/43] preinstalling libfreebl3... [ 4s] [14/43] preinstalling libgcc... [ 4s] [15/43] preinstalling liblua... [ 4s] [16/43] preinstalling liblzma... [ 4s] [17/43] preinstalling libopenssl3... [ 4s] [18/43] preinstalling libpopt... [ 4s] [19/43] preinstalling libreadline... [ 4s] [20/43] preinstalling libsmack... [ 4s] [21/43] preinstalling libsqlite... [ 4s] [22/43] preinstalling libuuid... [ 4s] [23/43] preinstalling libxcrypt... [ 4s] [24/43] preinstalling libxml2... [ 5s] [25/43] preinstalling libzstd1... [ 5s] [26/43] preinstalling nspr... [ 5s] [27/43] preinstalling sed... [ 5s] [28/43] preinstalling zlib... [ 5s] [29/43] preinstalling qemu-accel-x86_64-riscv64... [ 17s] [30/43] preinstalling qemu-linux-user-x86_64-cross... [ 21s] [31/43] preinstalling coreutils... [ 21s] [32/43] preinstalling libacl... [ 21s] [33/43] preinstalling libelf... [ 21s] [34/43] preinstalling libmount... [ 21s] [35/43] preinstalling smack... [ 21s] [36/43] preinstalling bzip2... [ 21s] [37/43] preinstalling libmagic... [ 21s] [38/43] preinstalling tar... [ 21s] [39/43] preinstalling util-linux... [ 21s] [40/43] preinstalling rpm... [ 22s] [41/43] preinstalling util-linux-su... [ 22s] [42/43] preinstalling nss... [ 22s] [43/43] preinstalling libsoftokn3... [ 22s] running qemu-linux-user-x86_64-cross postinstall script [ 22s] running qemu-accel-x86_64-riscv64 postinstall script [ 23s] mv: cannot stat `/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 23s] running setup postinstall script [ 23s] chroot: failed to run command '': No such file or directory [ 23s] initializing rpm db... [ 23s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 23s] breaking dependency libxcrypt-devel -> glibc-devel [ 23s] cycle: libsoftokn3 -> nss [ 23s] breaking dependency nss -> libsoftokn3 [ 23s] done [ 23s] querying package ids... [ 24s] [1/111] cumulate libmagic-data-5.46-1.11 [ 24s] [2/111] cumulate setup-0.9-1.7 [ 24s] [3/111] cumulate filesystem-3.1-1.1 [ 24s] [4/111] cumulate glibc-2.40-1.19 [ 24s] [5/111] cumulate bash-3.2.57-1.1 [ 24s] [6/111] cumulate cpio-2.8-1.1 [ 24s] [7/111] cumulate diffutils-3.10-1.2 [ 24s] [8/111] cumulate findutils-4.3.8-1.18 [ 24s] [9/111] cumulate gdbm-1.8.3-1.20 [ 24s] [10/111] cumulate hostname-3.23-1.1 [ 24s] [11/111] cumulate libatomic-14.2.0-2.7 [ 24s] [12/111] cumulate libattr-2.5.1-1.18 [ 24s] [13/111] cumulate libblkid-2.41.2-1.5 [ 24s] [14/111] cumulate libbz2-1.0.8-1.18 [ 24s] [15/111] cumulate libcap-2.73-1.17 [ 24s] [16/111] cumulate libexpat-2.7.3-1.14 [ 24s] [17/111] cumulate libffi-3.4.7-1.20 [ 24s] [18/111] cumulate libfreebl3-3.109-1.16 [ 24s] [19/111] cumulate libgcc-14.2.0-2.7 [ 24s] [20/111] cumulate libgomp-14.2.0-2.7 [ 24s] [21/111] cumulate libitm-14.2.0-2.7 [ 24s] [22/111] cumulate libltdl-2.5.4-1.11 [ 24s] [23/111] cumulate liblua-5.1.5-1.15 [ 24s] [24/111] cumulate liblzma-5.8.1-1.2 [ 24s] [25/111] cumulate libopenssl3-3.0.18-1.19 [ 24s] [26/111] cumulate libpcre-8.45-1.18 [ 24s] [27/111] cumulate libpopt-1.16-1.13 [ 24s] [28/111] cumulate libpython3_131_0-3.13.1-1.21 [ 24s] [29/111] cumulate libsmack-1.3.1-1.13 [ 24s] [30/111] cumulate libsmartcols-2.41.2-1.5 [ 24s] [31/111] cumulate libsqlite-3.51.0-1.4 [ 24s] [32/111] cumulate libuuid-2.41.2-1.5 [ 24s] [33/111] cumulate libxcrypt-4.4.36-1.20 [ 24s] [34/111] cumulate libxml2-2.13.5-1.20 [ 24s] [35/111] cumulate libzstd1-1.5.7-1.3 [ 24s] [36/111] cumulate m4-1.4.20-1.1 [ 24s] [37/111] cumulate net-tools-2.0_20121208git-1.13 [ 24s] [38/111] cumulate nspr-4.36-1.14 [ 24s] [39/111] cumulate patch-2.8-1.2 [ 24s] [40/111] cumulate pkg-config-0.29.2-1.19 [ 24s] [41/111] cumulate sed-4.1c-1.17 [ 24s] [42/111] cumulate update-alternatives-1.22.2-1.1 [ 24s] [43/111] cumulate which-2.17-1.1 [ 24s] [44/111] cumulate zlib-1.3.1-1.20 [ 24s] [45/111] cumulate build-compare-2023.06.18-1.9 [ 24s] [46/111] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 24s] [47/111] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-2.9 [ 24s] [48/111] cumulate binutils-libs-2.43-1.20 [ 24s] [49/111] cumulate coreutils-6.9-14.8 [ 24s] [50/111] cumulate cpp-14.2.0-2.7 [ 24s] [51/111] cumulate gawk-3.1.5-1.1 [ 24s] [52/111] cumulate gcc-c++-14.2.0-2.7 [ 24s] [53/111] cumulate grep-2.5.2-1.13 [ 24s] [54/111] cumulate libacl-2.3.2-1.18 [ 24s] [55/111] cumulate libelf-0.189-1.19 [ 24s] [56/111] cumulate libgfortran-14.2.0-2.7 [ 24s] [57/111] cumulate liblastlog2-2.41.2-1.5 [ 24s] [58/111] cumulate libmount-2.41.2-1.5 [ 24s] [59/111] cumulate libstdc++-14.2.0-2.7 [ 24s] [60/111] cumulate make-4.4.1-1.17 [ 24s] [61/111] cumulate nss-certs-3.109-1.16 [ 24s] [62/111] cumulate smack-1.3.1-1.13 [ 24s] [63/111] cumulate xz-devel-5.8.1-1.2 [ 24s] [64/111] cumulate bzip2-1.0.8-1.18 [ 24s] [65/111] cumulate libfdisk-2.41.2-1.5 [ 24s] [66/111] cumulate libmagic-5.46-1.11 [ 24s] [67/111] cumulate xz-5.8.1-1.2 [ 24s] [68/111] cumulate perl-5.38.0-1.19 [ 24s] [69/111] cumulate build-mkbaselibs-20120927-1.1 [ 24s] [70/111] cumulate libstdc++-devel-14.2.0-2.7 [ 24s] [71/111] cumulate linux-glibc-devel-6.6-1.20 [ 24s] [72/111] cumulate binutils-2.43-1.20 [ 24s] [73/111] cumulate file-5.46-1.11 [ 24s] [74/111] cumulate tar-1.17-1.1 [ 24s] [75/111] cumulate terminfo-base-full-6.4-1.20 [ 24s] [76/111] cumulate autoconf-2.71-1.20 [ 24s] [77/111] cumulate glibc-locale-2.40-1.19 [ 24s] [78/111] cumulate gzip-1.3.12-1.14 [ 24s] [79/111] cumulate libcc1-14.2.0-2.7 [ 24s] [80/111] cumulate pam-1.1.6-1.16 [ 24s] [81/111] cumulate tzdata-2025b-1.1 [ 24s] [82/111] cumulate libdw-0.189-1.19 [ 24s] [83/111] cumulate libarchive-3.8.1-1.19 [ 24s] [84/111] cumulate automake-1.16.5-1.20 [ 24s] [85/111] cumulate libasm-0.189-1.19 [ 24s] [86/111] cumulate libncurses5-6.4-1.20 [ 24s] [87/111] cumulate libncurses6-6.4-1.20 [ 24s] [88/111] cumulate build-20120927-1.1 [ 24s] [89/111] cumulate gcc-14.2.0-2.7 [ 24s] [90/111] cumulate rpm-4.14.1.1-2.9 [ 24s] [91/111] cumulate libncurses-6.4-1.20 [ 24s] [92/111] cumulate less-685-1.1 [ 24s] [93/111] cumulate libreadline-5.2-1.19 [ 24s] [94/111] cumulate qemu-accel-x86_64-riscv64-0.4-1.11 [ 24s] [95/111] cumulate libtool-2.5.4-1.11 [ 24s] [96/111] cumulate ncurses-devel-6.4-1.20 [ 24s] [97/111] cumulate elfutils-0.189-1.19 [ 24s] [98/111] cumulate readline-devel-5.2-1.19 [ 24s] [99/111] cumulate libxml2-tools-2.13.5-1.20 [ 24s] [100/111] cumulate python3-base-3.13.1-1.21 [ 24s] [101/111] cumulate util-linux-2.41.2-1.5 [ 24s] [102/111] cumulate python3-3.13.1-1.1 [ 24s] [103/111] cumulate util-linux-su-2.41.2-1.5 [ 24s] [104/111] cumulate python3-devel-3.13.1-1.21 [ 24s] [105/111] cumulate libxcrypt-devel-4.4.36-1.20 [ 24s] [106/111] cumulate nss-3.109-1.16 [ 24s] [107/111] cumulate glibc-devel-2.40-1.19 [ 24s] [108/111] cumulate libsoftokn3-3.109-1.16 [ 24s] [109/111] cumulate zlib-devel-1.3.1-1.20 [ 24s] [110/111] cumulate rpm-build-4.14.1.1-2.9 [ 24s] [111/111] cumulate libxml2-devel-2.13.5-1.20 [ 24s] now installing cumulated packages [ 25s] Preparing... ######################################## [ 25s] Updating / installing... [ 25s] setup-0.9-1.7 ######################################## [ 25s] filesystem-3.1-1.1 ######################################## [ 25s] glibc-2.40-1.19 ######################################## [ 26s] bash-3.2.57-1.1 ######################################## [ 26s] zlib-1.3.1-1.20 ######################################## [ 27s] coreutils-6.9-14.8 ######################################## [ 27s] libbz2-1.0.8-1.18 ######################################## [ 27s] liblzma-5.8.1-1.2 ######################################## [ 27s] libgcc-14.2.0-2.7 ######################################## [ 28s] libstdc++-14.2.0-2.7 ######################################## [ 28s] pkg-config-0.29.2-1.19 ######################################## [ 28s] libelf-0.189-1.19 ######################################## [ 28s] libdw-0.189-1.19 ######################################## [ 29s] libopenssl3-3.0.18-1.19 ######################################## [ 29s] libxcrypt-4.4.36-1.20 ######################################## [ 30s] libblkid-2.41.2-1.5 ######################################## [ 30s] libsqlite-3.51.0-1.4 ######################################## [ 30s] libxml2-2.13.5-1.20 ######################################## [ 31s] nspr-4.36-1.14 ######################################## [ 31s] pam-1.1.6-1.16 ######################################## [ 31s] terminfo-base-full-6.4-1.20 ######################################## [ 31s] libncurses6-6.4-1.20 ######################################## [ 32s] libreadline-5.2-1.19 ######################################## [ 32s] gdbm-1.8.3-1.20 ######################################## [ 36s] perl-5.38.0-1.19 ######################################## [ 36s] libcap-2.73-1.17 ######################################## [ 36s] libfreebl3-3.109-1.16 ######################################## [ 36s] liblua-5.1.5-1.15 ######################################## [ 36s] libpopt-1.16-1.13 ######################################## [ 37s] libpython3_131_0-3.13.1-1.21 ######################################## [ 37s] libuuid-2.41.2-1.5 ######################################## [ 37s] libzstd1-1.5.7-1.3 ######################################## [ 38s] libfdisk-2.41.2-1.5 ######################################## [ 38s] build-mkbaselibs-20120927-1.1 ######################################## [ 38s] libxml2-tools-2.13.5-1.20 ######################################## [ 38s] libncurses5-6.4-1.20 ######################################## [ 39s] ncurses-devel-6.4-1.20 ######################################## [ 39s] readline-devel-5.2-1.19 ######################################## [ 39s] nss-certs-3.109-1.16 ######################################## [ 39s] libsoftokn3-3.109-1.16 ######################################## [ 40s] nss-3.109-1.16 ######################################## [ 40s] liblastlog2-2.41.2-1.5 ######################################## [ 40s] libmount-2.41.2-1.5 ######################################## [ 40s] libasm-0.189-1.19 ######################################## [ 40s] xz-devel-5.8.1-1.2 ######################################## [ 40s] libcc1-14.2.0-2.7 ######################################## [ 41s] libgfortran-14.2.0-2.7 ######################################## [ 41s] xz-5.8.1-1.2 ######################################## [ 41s] bzip2-1.0.8-1.18 ######################################## [ 41s] linux-glibc-devel-6.6-1.20 ######################################## [ 41s] libxcrypt-devel-4.4.36-1.20 ######################################## [ 41s] glibc-devel-2.40-1.19 ######################################## [ 41s] zlib-devel-1.3.1-1.20 ######################################## [ 41s] gzip-1.3.12-1.14 ######################################## [ 42s] binutils-libs-2.43-1.20 ######################################## [ 42s] binutils-2.43-1.20 ######################################## [ 42s] make-4.4.1-1.17 ######################################## [ 42s] findutils-4.3.8-1.18 ######################################## [ 42s] libatomic-14.2.0-2.7 ######################################## [ 42s] libattr-2.5.1-1.18 ######################################## [ 42s] libacl-2.3.2-1.18 ######################################## [ 43s] tar-1.17-1.1 ######################################## [ 43s] libarchive-3.8.1-1.19 ######################################## [ 43s] libexpat-2.7.3-1.14 ######################################## [ 43s] libffi-3.4.7-1.20 ######################################## [ 45s] python3-base-3.13.1-1.21 ######################################## [ 45s] libgomp-14.2.0-2.7 ######################################## [ 45s] libitm-14.2.0-2.7 ######################################## [ 49s] gcc-14.2.0-2.7 ######################################## [ 49s] libltdl-2.5.4-1.11 ######################################## [ 49s] libpcre-8.45-1.18 ######################################## [ 49s] libsmack-1.3.1-1.13 ######################################## [ 50s] libsmartcols-2.41.2-1.5 ######################################## [ 50s] m4-1.4.20-1.1 ######################################## [ 50s] autoconf-2.71-1.20 ######################################## [ 50s] automake-1.16.5-1.20 ######################################## [ 50s] patch-2.8-1.2 ######################################## [ 50s] sed-4.1c-1.17 ######################################## [ 51s] util-linux-2.41.2-1.5 ######################################## [ 51s] libmagic-data-5.46-1.11 ######################################## [ 51s] libmagic-5.46-1.11 ######################################## [ 52s] rpm-4.14.1.1-2.9 ######################################## [ 52s] rpm-build-4.14.1.1-2.9 ######################################## [ 52s] file-5.46-1.11 ######################################## [ 52s] util-linux-su-2.41.2-1.5 ######################################## [ 52s] libtool-2.5.4-1.11 ######################################## [ 52s] smack-1.3.1-1.13 ######################################## [ 52s] grep-2.5.2-1.13 ######################################## [ 68s] qemu-accel-x86_64-riscv64-0.4-1.11 ######################################## [ 69s] python3-3.13.1-1.1 ######################################## [ 69s] python3-devel-3.13.1-1.21 ######################################## [ 69s] build-20120927-1.1 ######################################## [ 69s] libxml2-devel-2.13.5-1.20 ######################################## [ 69s] elfutils-0.189-1.19 ######################################## [ 69s] libncurses-6.4-1.20 ######################################## [ 69s] less-685-1.1 ######################################## [ 70s] libstdc++-devel-14.2.0-2.7 ######################################## [ 71s] glibc-locale-2.40-1.19 ######################################## [ 71s] tzdata-2025b-1.1 ######################################## [ 73s] cpp-14.2.0-2.7 ######################################## [ 74s] gcc-c++-14.2.0-2.7 ######################################## [ 74s] build-compare-2023.06.18-1.9 ######################################## [ 74s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 79s] qemu-linux-user-x86_64-cross-9.2.3.1-2######################################## [ 79s] gawk-3.1.5-1.1 ######################################## [ 79s] cpio-2.8-1.1 ######################################## [ 79s] diffutils-3.10-1.2 ######################################## [ 79s] hostname-3.23-1.1 ######################################## [ 79s] net-tools-2.0_20121208git-1.13 ######################################## [ 79s] update-alternatives-1.22.2-1.1 ######################################## [ 79s] which-2.17-1.1 ######################################## [ 80s] now finalizing build dir... [ 81s] ----------------------------------------------------------------- [ 81s] I have the following modifications for python3-libxml2.spec: [ 81s] 4c4 [ 81s] < Release: 0 [ 81s] --- [ 81s] > Release: 1.8 [ 81s] build target is riscv64-tizen-linux [ 81s] ----------------------------------------------------------------- [ 81s] ----- building python3-libxml2.spec (user abuild) [ 81s] ----------------------------------------------------------------- [ 81s] ----------------------------------------------------------------- [ 81s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=riscv64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-X/standard/970d2d0bbdce2b433057d5956cb9196e-python3-libxml2' /home/abuild/rpmbuild/SOURCES/python3-libxml2.spec [ 81s] Building target platforms: riscv64-tizen-linux [ 81s] Building for target riscv64-tizen-linux [ 81s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.piP54d [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + rm -rf python3-libxml2-2.13.5 [ 81s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python3-libxml2-2.13.5.tar.gz [ 81s] + /bin/tar -xof - [ 81s] + STATUS=0 [ 81s] + '[' 0 -ne 0 ']' [ 81s] + cd python3-libxml2-2.13.5 [ 81s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 81s] + echo 'Patch #0 (0001-Bump-to-2.13.5.patch):' [ 81s] Patch #0 (0001-Bump-to-2.13.5.patch): [ 81s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 81s] patching file .gitignore [ 81s] + cp /home/abuild/rpmbuild/SOURCES/python3-libxml2.manifest . [ 82s] + exit 0 [ 82s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.bBgzmk [ 82s] + umask 022 [ 82s] + cd /home/abuild/rpmbuild/BUILD [ 82s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 82s] + export CFLAGS [ 82s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 82s] + export CXXFLAGS [ 82s] + LDFLAGS= [ 82s] + export LDFLAGS [ 82s] + cd python3-libxml2-2.13.5 [ 82s] + ref=/usr/lib/rpm [ 82s] + mints=0 [ 82s] + case $(uname -m) in [ 82s] ++ uname -m [ 82s] + mints=20160911 [ 82s] + for s in guess sub [ 82s] ++ find -maxdepth 8 -name config.guess [ 82s] + for s in guess sub [ 82s] ++ find -maxdepth 8 -name config.sub [ 82s] + export 'CFLAGS=-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -fno-strict-aliasing' [ 82s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -fno-strict-aliasing' [ 82s] + export PYTHON=/usr/bin/python3 [ 82s] + PYTHON=/usr/bin/python3 [ 82s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -fno-strict-aliasing' [ 82s] + export CFLAGS [ 82s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 82s] + export CXXFLAGS [ 82s] + LDFLAGS= [ 82s] + export LDFLAGS [ 82s] + ./autogen.sh --build=riscv64-tizen-linux-gnu --host=riscv64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 94s] libtoolize: putting auxiliary files in '.'. [ 94s] libtoolize: copying file './ltmain.sh' [ 94s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 94s] libtoolize: copying file 'm4/libtool.m4' [ 94s] libtoolize: copying file 'm4/ltoptions.m4' [ 94s] libtoolize: copying file 'm4/ltsugar.m4' [ 94s] libtoolize: copying file 'm4/ltversion.m4' [ 94s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 108s] configure.ac:47: installing './compile' [ 108s] configure.ac:12: installing './config.guess' [ 108s] configure.ac:12: installing './config.sub' [ 108s] configure.ac:42: installing './install-sh' [ 108s] configure.ac:42: installing './missing' [ 109s] Makefile.am: installing './depcomp' [ 112s] python/Makefile.am:31: installing './py-compile' [ 114s] checking build system type... riscv64-tizen-linux-gnu [ 114s] checking host system type... riscv64-tizen-linux-gnu [ 114s] checking for a BSD-compatible install... /bin/install -c [ 114s] checking whether build environment is sane... yes [ 114s] checking for a race-free mkdir -p... /bin/mkdir -p [ 114s] checking for gawk... gawk [ 114s] checking whether make sets $(MAKE)... yes [ 114s] checking whether make supports nested variables... yes [ 114s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 114s] checking whether make supports nested variables... (cached) yes [ 114s] checking for riscv64-tizen-linux-gnu-gcc... riscv64-tizen-linux-gnu-gcc [ 114s] checking whether the C compiler works... yes [ 114s] checking for C compiler default output file name... a.out [ 114s] checking for suffix of executables... [ 114s] checking whether we are cross compiling... no [ 114s] checking for suffix of object files... o [ 114s] checking whether the compiler supports GNU C... yes [ 114s] checking whether riscv64-tizen-linux-gnu-gcc accepts -g... yes [ 115s] checking for riscv64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 115s] checking whether riscv64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 115s] checking whether make supports the include directive... yes (GNU style) [ 115s] checking dependency style of riscv64-tizen-linux-gnu-gcc... gcc3 [ 115s] checking whether ln -s works... yes [ 115s] checking for tar... /bin/tar [ 115s] checking for perl... /bin/perl [ 115s] checking for wget... /usr/bin/wget [ 115s] checking for xsltproc... /usr/bin/xsltproc [ 115s] checking for riscv64-tizen-linux-gnu-pkg-config... /bin/riscv64-tizen-linux-gnu-pkg-config [ 115s] checking pkg-config is at least version 0.9.0... yes [ 115s] checking how to print strings... printf [ 115s] checking for a sed that does not truncate output... /bin/sed [ 115s] checking for grep that handles long lines and -e... /bin/grep [ 115s] checking for egrep... /bin/grep -E [ 115s] checking for fgrep... /bin/grep -F [ 115s] checking for ld used by riscv64-tizen-linux-gnu-gcc... /usr/riscv64-tizen-linux-gnu/bin/ld [ 115s] checking if the linker (/usr/riscv64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 115s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 115s] checking the name lister (/bin/nm -B) interface... BSD nm [ 115s] checking the maximum length of command line arguments... 1572864 [ 115s] checking how to convert riscv64-tizen-linux-gnu file names to riscv64-tizen-linux-gnu format... func_convert_file_noop [ 115s] checking how to convert riscv64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 115s] checking for /usr/riscv64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 115s] checking for file... file [ 115s] checking for riscv64-tizen-linux-gnu-objdump... no [ 115s] checking for objdump... objdump [ 115s] checking how to recognize dependent libraries... pass_all [ 115s] checking for riscv64-tizen-linux-gnu-dlltool... no [ 115s] checking for dlltool... no [ 115s] checking how to associate runtime and link libraries... printf %s\n [ 115s] checking for riscv64-tizen-linux-gnu-ranlib... no [ 115s] checking for ranlib... ranlib [ 115s] checking for riscv64-tizen-linux-gnu-ar... no [ 115s] checking for ar... ar [ 115s] checking for archiver @FILE support... @ [ 115s] checking for riscv64-tizen-linux-gnu-strip... no [ 115s] checking for strip... strip [ 115s] checking command to parse /bin/nm -B output from riscv64-tizen-linux-gnu-gcc object... ok [ 115s] checking for sysroot... no [ 115s] checking for a working dd... /bin/dd [ 115s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 115s] checking for riscv64-tizen-linux-gnu-mt... no [ 115s] checking for mt... no [ 115s] checking if : is a manifest tool... no [ 115s] checking for stdio.h... yes [ 115s] checking for stdlib.h... yes [ 115s] checking for string.h... yes [ 115s] checking for inttypes.h... yes [ 115s] checking for stdint.h... yes [ 116s] checking for strings.h... yes [ 116s] checking for sys/stat.h... yes [ 116s] checking for sys/types.h... yes [ 116s] checking for unistd.h... yes [ 116s] checking for dlfcn.h... yes [ 116s] checking for objdir... .libs [ 116s] checking if riscv64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 116s] checking for riscv64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 116s] checking if riscv64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 116s] checking if riscv64-tizen-linux-gnu-gcc static flag -static works... no [ 116s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 116s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 116s] checking whether the riscv64-tizen-linux-gnu-gcc linker (/usr/riscv64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 116s] checking whether -lc should be explicitly linked in... no [ 116s] checking dynamic linker characteristics... GNU/Linux ld.so [ 116s] checking how to hardcode library paths into programs... immediate [ 116s] checking whether stripping libraries is possible... yes [ 116s] checking if libtool supports shared libraries... yes [ 116s] checking whether to build shared libraries... yes [ 116s] checking whether to build static libraries... no [ 117s] checking for cos in -lm... yes [ 117s] checking for stdint.h... (cached) yes [ 117s] checking for fcntl.h... yes [ 117s] checking for unistd.h... (cached) yes [ 117s] checking for sys/stat.h... (cached) yes [ 117s] checking for sys/mman.h... yes [ 117s] checking for sys/time.h... yes [ 117s] checking for sys/timeb.h... yes [ 117s] checking for sys/random.h... yes [ 117s] checking for dl.h... no [ 117s] checking for dlfcn.h... (cached) yes [ 117s] checking for glob.h... yes [ 117s] checking for gettimeofday... yes [ 117s] checking for ftime... yes [ 117s] checking for stat... yes [ 118s] checking for mmap... yes [ 118s] checking for munmap... yes [ 118s] checking for riscv64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed [ 118s] checking whether getentropy is declared... yes [ 118s] checking whether __attribute__((destructor)) is accepted... yes [ 118s] checking whether the linker accepts -Wl,--undefined-version... yes [ 119s] checking for python version... 3.13 [ 119s] checking for python platform... linux [ 119s] checking for GNU default python prefix... ${prefix} [ 119s] checking for GNU default python exec_prefix... ${exec_prefix} [ 120s] checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.13/site-packages [ 120s] checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.13/site-packages [ 121s] checking for python-3.13... yes [ 121s] checking for library containing dlopen... none required [ 121s] checking for pthread.h... yes [ 121s] checking for library containing pthread_create... none required [ 121s] checking for libiconv... none required [ 121s] checking that generated files are newer than configure... done [ 121s] configure: creating ./config.status [ 122s] config.status: creating Makefile [ 122s] config.status: creating include/Makefile [ 122s] config.status: creating include/libxml/Makefile [ 122s] config.status: creating include/private/Makefile [ 122s] config.status: creating doc/Makefile [ 122s] config.status: creating doc/devhelp/Makefile [ 122s] config.status: creating example/Makefile [ 122s] config.status: creating fuzz/Makefile [ 122s] config.status: creating python/Makefile [ 122s] config.status: creating python/tests/Makefile [ 122s] config.status: creating xstc/Makefile [ 122s] config.status: creating include/libxml/xmlversion.h [ 122s] config.status: creating libxml-2.0.pc [ 122s] config.status: creating libxml-2.0-uninstalled.pc [ 122s] config.status: creating libxml2-config.cmake [ 123s] config.status: creating python/setup.py [ 123s] config.status: creating xml2-config [ 123s] config.status: creating config.h [ 123s] config.status: executing depfiles commands [ 124s] config.status: executing libtool commands [ 124s] [ 124s] Now type 'make' to compile libxml2. [ 124s] + [[ -e config.sub ]] [ 124s] ++ automake --print-libdir [ 125s] + install -m 0755 /usr/share/automake-1.16/config.sub config.sub [ 125s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -fno-strict-aliasing' [ 125s] + export CFLAGS [ 125s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 125s] + export CXXFLAGS [ 125s] + LDFLAGS= [ 125s] + export LDFLAGS [ 125s] + ./configure --build=riscv64-tizen-linux-gnu --host=riscv64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-fexceptions --with-history --enable-ipv6 --with-sax1 --with-regexps --with-threads --with-reader --with-http [ 125s] configure: WARNING: unrecognized options: --with-fexceptions [ 125s] checking build system type... riscv64-tizen-linux-gnu [ 125s] checking host system type... riscv64-tizen-linux-gnu [ 125s] checking for a BSD-compatible install... /bin/install -c [ 125s] checking whether build environment is sane... yes [ 125s] checking for a race-free mkdir -p... /bin/mkdir -p [ 125s] checking for gawk... gawk [ 125s] checking whether make sets $(MAKE)... yes [ 125s] checking whether make supports nested variables... yes [ 126s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 126s] checking whether make supports nested variables... (cached) yes [ 126s] checking for riscv64-tizen-linux-gnu-gcc... riscv64-tizen-linux-gnu-gcc [ 126s] checking whether the C compiler works... yes [ 126s] checking for C compiler default output file name... a.out [ 126s] checking for suffix of executables... [ 126s] checking whether we are cross compiling... no [ 126s] checking for suffix of object files... o [ 126s] checking whether the compiler supports GNU C... yes [ 126s] checking whether riscv64-tizen-linux-gnu-gcc accepts -g... yes [ 126s] checking for riscv64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 126s] checking whether riscv64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 126s] checking whether make supports the include directive... yes (GNU style) [ 126s] checking dependency style of riscv64-tizen-linux-gnu-gcc... gcc3 [ 126s] checking whether ln -s works... yes [ 126s] checking for tar... /bin/tar [ 126s] checking for perl... /bin/perl [ 126s] checking for wget... /usr/bin/wget [ 126s] checking for xsltproc... /usr/bin/xsltproc [ 126s] checking for riscv64-tizen-linux-gnu-pkg-config... /bin/riscv64-tizen-linux-gnu-pkg-config [ 126s] checking pkg-config is at least version 0.9.0... yes [ 126s] checking how to print strings... printf [ 126s] checking for a sed that does not truncate output... /bin/sed [ 126s] checking for grep that handles long lines and -e... /bin/grep [ 126s] checking for egrep... /bin/grep -E [ 126s] checking for fgrep... /bin/grep -F [ 127s] checking for ld used by riscv64-tizen-linux-gnu-gcc... /usr/riscv64-tizen-linux-gnu/bin/ld [ 127s] checking if the linker (/usr/riscv64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 127s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 127s] checking the name lister (/bin/nm -B) interface... BSD nm [ 127s] checking the maximum length of command line arguments... 1572864 [ 127s] checking how to convert riscv64-tizen-linux-gnu file names to riscv64-tizen-linux-gnu format... func_convert_file_noop [ 127s] checking how to convert riscv64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 127s] checking for /usr/riscv64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 127s] checking for file... file [ 127s] checking for riscv64-tizen-linux-gnu-objdump... no [ 127s] checking for objdump... objdump [ 127s] checking how to recognize dependent libraries... pass_all [ 127s] checking for riscv64-tizen-linux-gnu-dlltool... no [ 127s] checking for dlltool... no [ 127s] checking how to associate runtime and link libraries... printf %s\n [ 127s] checking for riscv64-tizen-linux-gnu-ranlib... no [ 127s] checking for ranlib... ranlib [ 127s] checking for riscv64-tizen-linux-gnu-ar... no [ 127s] checking for ar... ar [ 127s] checking for archiver @FILE support... @ [ 127s] checking for riscv64-tizen-linux-gnu-strip... no [ 127s] checking for strip... strip [ 127s] checking command to parse /bin/nm -B output from riscv64-tizen-linux-gnu-gcc object... ok [ 127s] checking for sysroot... no [ 127s] checking for a working dd... /bin/dd [ 127s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 127s] checking for riscv64-tizen-linux-gnu-mt... no [ 127s] checking for mt... no [ 127s] checking if : is a manifest tool... no [ 127s] checking for stdio.h... yes [ 127s] checking for stdlib.h... yes [ 127s] checking for string.h... yes [ 127s] checking for inttypes.h... yes [ 127s] checking for stdint.h... yes [ 127s] checking for strings.h... yes [ 127s] checking for sys/stat.h... yes [ 127s] checking for sys/types.h... yes [ 128s] checking for unistd.h... yes [ 128s] checking for dlfcn.h... yes [ 128s] checking for objdir... .libs [ 128s] checking if riscv64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 128s] checking for riscv64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 128s] checking if riscv64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 128s] checking if riscv64-tizen-linux-gnu-gcc static flag -static works... no [ 128s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 128s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 128s] checking whether the riscv64-tizen-linux-gnu-gcc linker (/usr/riscv64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 128s] checking whether -lc should be explicitly linked in... no [ 128s] checking dynamic linker characteristics... GNU/Linux ld.so [ 128s] checking how to hardcode library paths into programs... immediate [ 128s] checking whether stripping libraries is possible... yes [ 128s] checking if libtool supports shared libraries... yes [ 128s] checking whether to build shared libraries... yes [ 128s] checking whether to build static libraries... no [ 129s] checking for cos in -lm... yes [ 129s] checking for stdint.h... (cached) yes [ 129s] checking for fcntl.h... yes [ 129s] checking for unistd.h... (cached) yes [ 129s] checking for sys/stat.h... (cached) yes [ 129s] checking for sys/mman.h... yes [ 129s] checking for sys/time.h... yes [ 129s] checking for sys/timeb.h... yes [ 129s] checking for sys/random.h... yes [ 129s] checking for dl.h... no [ 129s] checking for dlfcn.h... (cached) yes [ 129s] checking for glob.h... yes [ 129s] checking for gettimeofday... yes [ 129s] checking for ftime... yes [ 129s] checking for stat... yes [ 130s] checking for mmap... yes [ 130s] checking for munmap... yes [ 130s] checking for riscv64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed [ 130s] checking whether getentropy is declared... yes [ 130s] checking for sys/socket.h... yes [ 130s] checking for netinet/in.h... yes [ 130s] checking for arpa/inet.h... yes [ 130s] checking for netdb.h... yes [ 131s] checking for sys/select.h... yes [ 131s] checking for poll.h... yes [ 131s] checking for library containing gethostbyname... none required [ 131s] checking for library containing connect... none required [ 131s] checking for type of socket length (socklen_t)... socklen_t * [ 131s] checking whether to enable IPv6... yes [ 131s] checking whether __attribute__((destructor)) is accepted... yes [ 132s] checking whether the linker accepts -Wl,--undefined-version... yes [ 132s] Enabling HTTP support [ 132s] checking for python version... 3.13 [ 132s] checking for python platform... linux [ 132s] checking for GNU default python prefix... ${prefix} [ 132s] checking for GNU default python exec_prefix... ${exec_prefix} [ 133s] checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.13/site-packages [ 133s] checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.13/site-packages [ 133s] checking for python-3.13... yes [ 133s] checking for library containing dlopen... none required [ 133s] checking for pthread.h... yes [ 134s] checking for library containing pthread_create... none required [ 134s] Enabling xmllint shell history [ 134s] checking for tputs in -lncurses... no [ 134s] checking for tputs in -lcurses... no [ 134s] checking for tputs in -ltermcap... no [ 134s] checking for tputs in -lterminfo... no [ 134s] checking for tputs in -ltermlib... no [ 134s] checking for readline/history.h... yes [ 134s] checking for append_history in -lhistory... yes [ 134s] checking for readline/readline.h... yes [ 135s] checking for readline in -lreadline... yes [ 135s] checking for libiconv... none required [ 135s] checking that generated files are newer than configure... done [ 135s] configure: creating ./config.status [ 135s] config.status: creating Makefile [ 136s] config.status: creating include/Makefile [ 136s] config.status: creating include/libxml/Makefile [ 136s] config.status: creating include/private/Makefile [ 136s] config.status: creating doc/Makefile [ 136s] config.status: creating doc/devhelp/Makefile [ 136s] config.status: creating example/Makefile [ 136s] config.status: creating fuzz/Makefile [ 136s] config.status: creating python/Makefile [ 136s] config.status: creating python/tests/Makefile [ 136s] config.status: creating xstc/Makefile [ 136s] config.status: creating include/libxml/xmlversion.h [ 136s] config.status: creating libxml-2.0.pc [ 136s] config.status: creating libxml-2.0-uninstalled.pc [ 136s] config.status: creating libxml2-config.cmake [ 136s] config.status: creating python/setup.py [ 136s] config.status: creating xml2-config [ 136s] config.status: creating config.h [ 136s] config.status: executing depfiles commands [ 137s] config.status: executing libtool commands [ 137s] configure: WARNING: unrecognized options: --with-fexceptions [ 137s] + mkdir .libs [ 137s] + cp -v /usr/lib64/libxml2.la . [ 137s] `/usr/lib64/libxml2.la' -> `./libxml2.la' [ 137s] + make -C python -j12 [ 137s] make: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 137s] /usr/bin/python3 ./generator.py . [ 139s] Found 1644 functions in libxml2-api.xml [ 139s] Found 53 functions in libxml2-python-api.xml [ 139s] Generated 894 wrapper functions, 593 failed, 210 skipped [ 139s] make all-recursive [ 139s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 139s] Making all in . [ 139s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 139s] CC libxml.lo [ 140s] CC types.lo [ 141s] CC libxml2-py.lo [ 146s] CCLD libxml2mod.la [ 147s] cat ./libxml.py `test -f libxml2class.py || echo ./`libxml2class.py > libxml2.py [ 147s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 147s] Making all in tests [ 147s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 147s] make[2]: Nothing to be done for 'all'. [ 147s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 147s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 147s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 147s] + exit 0 [ 147s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ndseKu [ 147s] + umask 022 [ 147s] + cd /home/abuild/rpmbuild/BUILD [ 147s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64 [ 147s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64 [ 147s] + cd python3-libxml2-2.13.5 [ 147s] + make -C python install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64 pythondir=/usr/lib/python3.13/site-packages PYTHON_SITE_PACKAGES=/usr/lib/python3.13/site-packages [ 147s] make: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 147s] make install-recursive [ 147s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 147s] Making install in . [ 147s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 147s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 147s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/lib64/python3.13/site-packages' [ 147s] /bin/sh ../libtool --mode=install /bin/install -c libxml2mod.la '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/lib64/python3.13/site-packages' [ 147s] libtool: install: /bin/install -c .libs/libxml2mod.so /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/lib64/python3.13/site-packages/libxml2mod.so [ 147s] libtool: install: /bin/install -c .libs/libxml2mod.lai /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/lib64/python3.13/site-packages/libxml2mod.la [ 147s] libtool: warning: remember to run 'libtool --finish /usr/lib64/python3.13/site-packages' [ 147s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/lib/python3.13/site-packages' [ 147s] /bin/install -c -m 644 libxml2.py '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/lib/python3.13/site-packages' [ 147s] Byte-compiling python modules... [ 148s] libxml2.py [ 149s] Byte-compiling python modules (optimized versions) ... [ 149s] libxml2.py [ 149s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/lib/python3.13/site-packages' [ 149s] /bin/install -c -m 644 drv_libxml2.py '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/lib/python3.13/site-packages' [ 150s] Byte-compiling python modules... [ 150s] drv_libxml2.py [ 150s] Byte-compiling python modules (optimized versions) ... [ 150s] drv_libxml2.py [ 151s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 151s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 151s] Making install in tests [ 151s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 151s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 151s] make[3]: Nothing to be done for 'install-exec-am'. [ 151s] make[3]: Nothing to be done for 'install-data-am'. [ 151s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 151s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 151s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 151s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 151s] + chmod a-x python/tests/attribs.py python/tests/build.py python/tests/compareNodes.py python/tests/ctxterror.py python/tests/cutnpaste.py python/tests/dtdvalid.py python/tests/error.py python/tests/inbuf.py python/tests/indexes.py python/tests/input_callback.py python/tests/nsdel.py python/tests/outbuf.py python/tests/push.py python/tests/pushSAX.py python/tests/pushSAXhtml.py python/tests/reader.py python/tests/reader2.py python/tests/reader3.py python/tests/reader4.py python/tests/reader5.py python/tests/reader6.py python/tests/reader7.py python/tests/reader8.py python/tests/readererr.py python/tests/readernext.py python/tests/regexp.py python/tests/relaxng.py python/tests/resolver.py python/tests/schema.py python/tests/serialize.py python/tests/setup_test.py python/tests/sync.py python/tests/thread2.py python/tests/tst.py python/tests/tstLastError.py python/tests/tstURI.py python/tests/tstmem.py python/tests/tstxpath.py python/tests/validDTD.py python/tests/validRNG.py python/tests/validSchemas.py python/tests/validate.py python/tests/walker.py python/tests/xpath.py python/tests/xpathext.py python/tests/xpathleak.py python/tests/xpathns.py python/tests/xpathret.py [ 151s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/share/doc [ 151s] + rm -f /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/lib64/python3.13/site-packages/libxml2mod.la '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/lib64/python3.13/site-packages/*.a' [ 151s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.13.5-1.8 --unique-debug-src-base python3-libxml2-2.13.5-1.8.riscv64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 151s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/lib64/python3.13/site-packages/libxml2mod.so [ 151s] 2127 blocks [ 151s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python3-libxml2-debuginfo.manifest [ 151s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python3-libxml2-debugsource.manifest [ 151s] + /usr/lib/rpm/check-buildroot [ 152s] + /usr/lib/rpm//brp-compress [ 152s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 152s] + /usr/lib/rpm/brp-python-hardlink [ 152s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64 [ 152s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/isu.list [ 152s] ~/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64 ~/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 152s] ~/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 152s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 152s] Processing files: python3-libxml2-2.13.5-1.8.riscv64 [ 152s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 152s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 152s] [ 152s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.Y2Ucyn [ 152s] + umask 022 [ 152s] + cd /home/abuild/rpmbuild/BUILD [ 152s] + cd python3-libxml2-2.13.5 [ 152s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/share/doc/packages/python3-libxml2 [ 152s] + export LC_ALL=C [ 152s] + LC_ALL=C [ 152s] + export DOCDIR [ 152s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/share/doc/packages/python3-libxml2 [ 152s] + cp -pr python/libxml2class.txt /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/share/doc/packages/python3-libxml2 [ 152s] + cp -pr python/tests /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/share/doc/packages/python3-libxml2 [ 152s] + exit 0 [ 152s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ciSL8W [ 152s] + umask 022 [ 152s] + cd /home/abuild/rpmbuild/BUILD [ 152s] + cd python3-libxml2-2.13.5 [ 152s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/share/licenses/python3-libxml2 [ 152s] + export LC_ALL=C [ 152s] + LC_ALL=C [ 152s] + export LICENSEDIR [ 152s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/share/licenses/python3-libxml2 [ 152s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64/usr/share/licenses/python3-libxml2 [ 152s] + exit 0 [ 153s] Provides: libxml2-python3 = 2.13.5 libxml2mod.so()(64bit) python3-libxml2 = 2.13.5-1.8 python3-libxml2(riscv-64) = 2.13.5-1.8 [ 153s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 153s] Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libc.so.6(GLIBC_2.28)(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.5.0)(64bit) libxml2.so.2(LIBXML2_2.5.2)(64bit) libxml2.so.2(LIBXML2_2.5.4)(64bit) libxml2.so.2(LIBXML2_2.5.6)(64bit) libxml2.so.2(LIBXML2_2.5.7)(64bit) libxml2.so.2(LIBXML2_2.5.8)(64bit) libxml2.so.2(LIBXML2_2.5.9)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) libxml2.so.2(LIBXML2_2.6.1)(64bit) libxml2.so.2(LIBXML2_2.6.10)(64bit) libxml2.so.2(LIBXML2_2.6.11)(64bit) libxml2.so.2(LIBXML2_2.6.12)(64bit) libxml2.so.2(LIBXML2_2.6.14)(64bit) libxml2.so.2(LIBXML2_2.6.15)(64bit) libxml2.so.2(LIBXML2_2.6.16)(64bit) libxml2.so.2(LIBXML2_2.6.17)(64bit) libxml2.so.2(LIBXML2_2.6.18)(64bit) libxml2.so.2(LIBXML2_2.6.2)(64bit) libxml2.so.2(LIBXML2_2.6.20)(64bit) libxml2.so.2(LIBXML2_2.6.21)(64bit) libxml2.so.2(LIBXML2_2.6.23)(64bit) libxml2.so.2(LIBXML2_2.6.25)(64bit) libxml2.so.2(LIBXML2_2.6.27)(64bit) libxml2.so.2(LIBXML2_2.6.28)(64bit) libxml2.so.2(LIBXML2_2.6.3)(64bit) libxml2.so.2(LIBXML2_2.6.5)(64bit) libxml2.so.2(LIBXML2_2.6.6)(64bit) libxml2.so.2(LIBXML2_2.6.8)(64bit) libxml2.so.2(LIBXML2_2.7.0)(64bit) libxml2.so.2(LIBXML2_2.7.3)(64bit) libxml2.so.2(LIBXML2_2.8.0)(64bit) libxml2.so.2(LIBXML2_2.9.0)(64bit) libxml2.so.2(LIBXML2_2.9.1)(64bit) libxml2.so.2(LIBXML2_2.9.11)(64bit) [ 153s] Obsoletes: libxml2-python3 < 2.13.5 [ 153s] Processing files: python3-libxml2-debugsource-2.13.5-1.8.riscv64 [ 153s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 153s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 153s] [ 153s] Provides: python3-libxml2-debugsource = 2.13.5-1.8 python3-libxml2-debugsource(riscv-64) = 2.13.5-1.8 [ 153s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 153s] Processing files: python3-libxml2-debuginfo-2.13.5-1.8.riscv64 [ 153s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 153s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 153s] [ 153s] Provides: python3-libxml2-debuginfo = 2.13.5-1.8 python3-libxml2-debuginfo(riscv-64) = 2.13.5-1.8 [ 153s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 153s] Recommends: python3-libxml2-debugsource(riscv-64) = 2.13.5-1.8 [ 153s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64 [ 153s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-libxml2-2.13.5-1.8.src.rpm [ 154s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/python3-libxml2-2.13.5-1.8.riscv64.rpm [ 154s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/python3-libxml2-debugsource-2.13.5-1.8.riscv64.rpm [ 154s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/python3-libxml2-debuginfo-2.13.5-1.8.riscv64.rpm [ 154s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.JD13xl [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64 [ 154s] + cd python3-libxml2-2.13.5 [ 154s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.8.riscv64 [ 154s] + exit 0 [ 154s] ... checking for files with abuild user/group [ 154s] ... creating baselibs [ 155s] ... comparing built packages with the former built [ 155s] /usr/lib/build/pkg-diff.sh [ 155s] compare /.build.oldpackages/python3-libxml2-2.13.5-1.7.src.rpm /home/abuild/rpmbuild/SRPMS/python3-libxml2-2.13.5-1.8.src.rpm [ 155s] This is not a prerelease project. Compare the project name. [ 155s] comparing disturl_distribution [ 155s] comparing the rpm tags of python3-libxml2 [ 155s] --- old-rpm-tags [ 155s] +++ new-rpm-tags [ 155s] @@ -90 +90 @@ [ 155s] -python3-libxml2.spec cfbeba0dbdd4aecb6ad111d28c38defea666a1eac17b7b1a2351acd8e7728656 32 [ 155s] +python3-libxml2.spec 44a0a6fd280d41876f863df7e4c053bd31318113129182f8633d82893d040b2d 32 [ 155s] comparing rpmtags [ 155s] comparing RELEASE [ 155s] comparing PROVIDES [ 155s] comparing scripts [ 155s] comparing filelist [ 156s] comparing file checksum [ 156s] compare /.build.oldpackages/python3-libxml2-2.13.5-1.7.riscv64.rpm /home/abuild/rpmbuild/RPMS/riscv64/python3-libxml2-2.13.5-1.8.riscv64.rpm [ 156s] Comparing python3-libxml2-2.13.5-1.7.riscv64.rpm to python3-libxml2-2.13.5-1.8.riscv64.rpm [ 156s] This is not a prerelease project. Compare the project name. [ 156s] comparing disturl_distribution [ 156s] comparing the rpm tags of python3-libxml2 [ 156s] --- old-rpm-tags [ 156s] +++ new-rpm-tags [ 156s] @@ -200,4 +200,4 @@ [ 156s] -/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.opt-1.pyc d9409b52004d02cdd6347847f84e87beb4a0c75aa139a920042fb386209d25f6 0 [ 156s] -/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.pyc d9409b52004d02cdd6347847f84e87beb4a0c75aa139a920042fb386209d25f6 0 [ 156s] -/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.opt-1.pyc 79b811fe3e5ff789ad9bda280c4a25acac958b3b5d831b4bd3046c403eaed1f0 0 [ 156s] -/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.pyc 79b811fe3e5ff789ad9bda280c4a25acac958b3b5d831b4bd3046c403eaed1f0 0 [ 156s] +/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.opt-1.pyc 024ecde4cc238040ec8367d65ab3fa5d085d096a1fd5d6e67c9306b1a1cb456b 0 [ 156s] +/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.pyc 024ecde4cc238040ec8367d65ab3fa5d085d096a1fd5d6e67c9306b1a1cb456b 0 [ 156s] +/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.opt-1.pyc e070333c6906bec748d783106f8f996ed9023a14c1d3e62090ce5233919af2f2 0 [ 156s] +/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.pyc e070333c6906bec748d783106f8f996ed9023a14c1d3e62090ce5233919af2f2 0 [ 156s] @@ -206 +206 @@ [ 156s] -/usr/lib64/python3.13/site-packages/libxml2mod.so 558f43a09f1f4d46ae5e13b74ef60f97692234563792b5a11ec1177479f95188 0 [ 156s] +/usr/lib64/python3.13/site-packages/libxml2mod.so 10afe1364a3da4eeb921b7206f60e85a0cabd9714c27d170a94a312b4d430dd9 0 [ 156s] @@ -210 +210 @@ [ 156s] -/usr/share/doc/packages/python3-libxml2/tests/Makefile cbc549e1a4c1cd8c7c8226167c5310c3bc9153ff1adb1d8684eba26cc24cd8cd 2 [ 156s] +/usr/share/doc/packages/python3-libxml2/tests/Makefile 9bfac58a273040e22fe8a38470b3370dc9af819d9938ac61ce2f895289f71ceb 2 [ 156s] @@ -273 +273 @@ [ 156s] -python3-libxml2-2.13.5-1.7.src.rpm [ 156s] +python3-libxml2-2.13.5-1.8.src.rpm [ 156s] comparing rpmtags [ 156s] comparing RELEASE [ 157s] comparing PROVIDES [ 157s] comparing scripts [ 157s] comparing filelist [ 157s] comparing file checksum [ 157s] creating rename script [ 157s] RPM file checksum differs. [ 157s] Extracting packages [ 158s] /usr/share/doc/packages/python3-libxml2/tests/Makefile differs (ASCII text) [ 158s] --- old//usr/share/doc/packages/python3-libxml2/tests/Makefile 2025-12-22 10:07:47.000000000 +0900 [ 158s] +++ new//usr/share/doc/packages/python3-libxml2/tests/Makefile 2025-12-26 15:13:03.000000000 +0900 [ 158s] @@ -221,7 +221,7 @@ [ 158s] RANLIB = ranlib [ 158s] RDL_CFLAGS = [ 158s] RDL_LIBS = -lreadline -lhistory [ 158s] -RELDATE = Mon Dec 22 2025 [ 158s] +RELDATE = Fri Dec 26 2025 [ 158s] SED = /bin/sed [ 158s] SET_MAKE = [ 158s] SHELL = /bin/sh [ 158s] compare /.build.oldpackages/python3-libxml2-debuginfo-2.13.5-1.7.riscv64.rpm /home/abuild/rpmbuild/RPMS/riscv64/python3-libxml2-debuginfo-2.13.5-1.8.riscv64.rpm [ 158s] skipping -debuginfo package [ 158s] compare /.build.oldpackages/python3-libxml2-debugsource-2.13.5-1.7.riscv64.rpm /home/abuild/rpmbuild/RPMS/riscv64/python3-libxml2-debugsource-2.13.5-1.8.riscv64.rpm [ 158s] Comparing python3-libxml2-debugsource-2.13.5-1.7.riscv64.rpm to python3-libxml2-debugsource-2.13.5-1.8.riscv64.rpm [ 158s] This is not a prerelease project. Compare the project name. [ 158s] comparing disturl_distribution [ 158s] comparing the rpm tags of python3-libxml2-debugsource [ 158s] --- old-rpm-tags [ 158s] +++ new-rpm-tags [ 158s] @@ -170 +170 @@ [ 158s] -python3-libxml2-2.13.5-1.7.src.rpm [ 158s] +python3-libxml2-2.13.5-1.8.src.rpm [ 158s] comparing rpmtags [ 158s] comparing RELEASE [ 158s] comparing PROVIDES [ 158s] comparing scripts [ 158s] comparing filelist [ 158s] comparing file checksum [ 158s] creating rename script [ 158s] RPM meta information is identical [ 158s] No rpmlint.log available [ 158s] [ 158s] 06a7e1edff13 finished "build python3-libxml2.spec" at Fri Dec 26 06:13:25 UTC 2025. [ 158s]