[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 58ddb04e8dc7 started "build configure-dumper.spec" at Fri Dec 27 08:13:58 UTC 2024. [ 0s] [ 0s] Building configure-dumper for project 'Tizen-Base' repository 'standard' arch 'armv7l' srcmd5 '8b72f7f7f31f11a165661df438555159' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8/.build-srcdir/configure-dumper.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8/.build-srcdir/configure-dumper.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/8/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8/.build-srcdir/configure-dumper.spec build ... [ 1s] registering binfmt handlers for cross build [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/42] preinstalling libmagic-data... [ 2s] [2/42] preinstalling libncurses... [ 2s] [3/42] preinstalling setup... [ 2s] [4/42] preinstalling filesystem... [ 3s] [5/42] preinstalling glibc... [ 3s] [6/42] preinstalling libgcc... [ 3s] [7/42] preinstalling bash... [ 3s] [8/42] preinstalling diffutils... [ 3s] [9/42] preinstalling grep... [ 3s] [10/42] preinstalling libattr... [ 3s] [11/42] preinstalling libblkid... [ 3s] [12/42] preinstalling libbz2... [ 3s] [13/42] preinstalling libcap... [ 3s] [14/42] preinstalling libfreebl3... [ 3s] [15/42] preinstalling liblua... [ 3s] [16/42] preinstalling liblzma... [ 3s] [17/42] preinstalling libpopt... [ 3s] [18/42] preinstalling libreadline... [ 3s] [19/42] preinstalling libsmack... [ 3s] [20/42] preinstalling libsqlite... [ 4s] [21/42] preinstalling libuuid... [ 4s] [22/42] preinstalling libxcrypt... [ 4s] [23/42] preinstalling libzstd1... [ 4s] [24/42] preinstalling nspr... [ 4s] [25/42] preinstalling sed... [ 4s] [26/42] preinstalling zlib... [ 4s] [27/42] preinstalling qemu-accel-x86_64-armv7l... [ 16s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 19s] [29/42] preinstalling coreutils... [ 19s] [30/42] preinstalling libacl... [ 19s] [31/42] preinstalling libelf... [ 19s] [32/42] preinstalling libmount... [ 19s] [33/42] preinstalling smack... [ 19s] [34/42] preinstalling bzip2... [ 20s] [35/42] preinstalling libmagic... [ 20s] [36/42] preinstalling libxml2... [ 20s] [37/42] preinstalling tar... [ 20s] [38/42] preinstalling util-linux... [ 20s] [39/42] preinstalling util-linux-su... [ 20s] [40/42] preinstalling nss... [ 20s] [41/42] preinstalling libsoftokn3... [ 20s] [42/42] preinstalling rpm... [ 21s] running qemu-linux-user-x86_64-cross postinstall script [ 21s] running qemu-accel-x86_64-armv7l postinstall script [ 21s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 21s] running setup postinstall script [ 21s] chroot: failed to run command '': No such file or directory [ 21s] initializing rpm db... [ 22s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 22s] breaking dependency libxcrypt-devel -> glibc-devel [ 22s] cycle: libsoftokn3 -> nss [ 22s] breaking dependency nss -> libsoftokn3 [ 22s] done [ 22s] querying package ids... [ 22s] [1/98] cumulate libmagic-data-5.45-1.8 [ 22s] [2/98] cumulate setup-0.9-1.4 [ 22s] [3/98] cumulate filesystem-3.1-1.1 [ 22s] [4/98] cumulate glibc-2.40-1.1 [ 22s] [5/98] cumulate libatomic-14.2.0-1.11 [ 22s] [6/98] cumulate libgcc-14.2.0-1.11 [ 22s] [7/98] cumulate bash-3.2.57-1.1 [ 22s] [8/98] cumulate cpio-2.8-1.1 [ 22s] [9/98] cumulate diffutils-3.10-1.1 [ 22s] [10/98] cumulate findutils-4.3.8-1.8 [ 22s] [11/98] cumulate gdbm-1.8.3-1.12 [ 22s] [12/98] cumulate hostname-3.23-1.1 [ 22s] [13/98] cumulate libattr-2.5.1-1.8 [ 22s] [14/98] cumulate libblkid-2.39.3-1.8 [ 22s] [15/98] cumulate libbz2-1.0.8-1.8 [ 22s] [16/98] cumulate libcap-2.69-1.9 [ 22s] [17/98] cumulate libfreebl3-3.98-1.13 [ 22s] [18/98] cumulate libgfortran-14.2.0-1.11 [ 22s] [19/98] cumulate libgomp-14.2.0-1.11 [ 22s] [20/98] cumulate libitm-14.2.0-1.11 [ 22s] [21/98] cumulate libltdl-2.4.7-1.12 [ 22s] [22/98] cumulate liblua-5.1.5-1.8 [ 22s] [23/98] cumulate liblzma-5.6.3-1.4 [ 22s] [24/98] cumulate libopenssl3-3.0.13-1.12 [ 22s] [25/98] cumulate libpcre-8.45-1.8 [ 22s] [26/98] cumulate libpopt-1.16-1.7 [ 22s] [27/98] cumulate libsmack-1.3.1-1.7 [ 22s] [28/98] cumulate libsmartcols-2.39.3-1.8 [ 22s] [29/98] cumulate libsqlite-3.48.0-1.4 [ 22s] [30/98] cumulate libstdc++-14.2.0-1.11 [ 22s] [31/98] cumulate libuuid-2.39.3-1.8 [ 22s] [32/98] cumulate libxcrypt-4.4.36-1.11 [ 22s] [33/98] cumulate libzstd1-1.5.6-1.4 [ 22s] [34/98] cumulate m4-1.4.19-1.1 [ 22s] [35/98] cumulate net-tools-2.0_20121208git-1.7 [ 22s] [36/98] cumulate nspr-4.35-1.8 [ 22s] [37/98] cumulate patch-2.7.6-1.7 [ 22s] [38/98] cumulate pkg-config-0.29.2-1.8 [ 22s] [39/98] cumulate sed-4.1c-1.8 [ 22s] [40/98] cumulate update-alternatives-1.22.2-1.1 [ 22s] [41/98] cumulate which-2.17-1.1 [ 22s] [42/98] cumulate zlib-1.3.1-1.4 [ 22s] [43/98] cumulate build-compare-2023.06.18-1.4 [ 22s] [44/98] cumulate hal-rootstrap-checker-0.1.0-2.1 [ 22s] [45/98] cumulate libstdc++-devel-14.2.0-1.11 [ 22s] [46/98] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-21.5 [ 22s] [47/98] cumulate cpp-14.2.0-1.11 [ 22s] [48/98] cumulate gcc-c++-14.2.0-1.11 [ 22s] [49/98] cumulate binutils-libs-2.43-1.12 [ 22s] [50/98] cumulate coreutils-6.9-14.4 [ 22s] [51/98] cumulate gawk-3.1.5-1.1 [ 22s] [52/98] cumulate grep-2.5.2-1.7 [ 22s] [53/98] cumulate libacl-2.3.2-1.9 [ 22s] [54/98] cumulate libcc1-14.2.0-1.11 [ 22s] [55/98] cumulate libelf-0.189-1.11 [ 22s] [56/98] cumulate libmount-2.39.3-1.8 [ 22s] [57/98] cumulate libubsan-14.2.0-1.11 [ 22s] [58/98] cumulate make-4.4-1.8 [ 22s] [59/98] cumulate nss-certs-3.98-1.13 [ 22s] [60/98] cumulate smack-1.3.1-1.7 [ 22s] [61/98] cumulate bzip2-1.0.8-1.8 [ 22s] [62/98] cumulate libfdisk-2.39.3-1.8 [ 22s] [63/98] cumulate libmagic-5.45-1.8 [ 22s] [64/98] cumulate libxml2-2.12.5-1.9 [ 22s] [65/98] cumulate xz-5.6.3-1.4 [ 22s] [66/98] cumulate perl-5.38.0-1.8 [ 22s] [67/98] cumulate build-mkbaselibs-20120927-1.1 [ 22s] [68/98] cumulate linux-glibc-devel-6.6-1.12 [ 22s] [69/98] cumulate terminfo-base-full-6.4-1.12 [ 22s] [70/98] cumulate autoconf-2.71-1.11 [ 22s] [71/98] cumulate file-5.45-1.8 [ 22s] [72/98] cumulate glibc-locale-2.40-1.1 [ 22s] [73/98] cumulate tar-1.17-1.1 [ 22s] [74/98] cumulate binutils-2.43-1.12 [ 22s] [75/98] cumulate gzip-1.3.12-1.8 [ 22s] [76/98] cumulate pam-1.1.6-1.7 [ 22s] [77/98] cumulate tzdata-2023c-1.1 [ 22s] [78/98] cumulate libdw-0.189-1.11 [ 22s] [79/98] cumulate libarchive-3.7.2-1.10 [ 22s] [80/98] cumulate gcc-14.2.0-1.11 [ 22s] [81/98] cumulate qemu-accel-x86_64-armv7l-0.4-1.4 [ 22s] [82/98] cumulate automake-1.16.5-1.12 [ 22s] [83/98] cumulate libasm-0.189-1.11 [ 22s] [84/98] cumulate libncurses6-6.4-1.12 [ 22s] [85/98] cumulate build-20120927-1.1 [ 22s] [86/98] cumulate libncurses-6.4-1.12 [ 22s] [87/98] cumulate less-668-1.1 [ 22s] [88/98] cumulate libreadline-5.2-1.8 [ 22s] [89/98] cumulate libtool-2.4.7-1.12 [ 22s] [90/98] cumulate elfutils-0.189-1.11 [ 22s] [91/98] cumulate util-linux-2.39.3-1.8 [ 22s] [92/98] cumulate util-linux-su-2.39.3-1.8 [ 22s] [93/98] cumulate libxcrypt-devel-4.4.36-1.11 [ 22s] [94/98] cumulate nss-3.98-1.13 [ 22s] [95/98] cumulate glibc-devel-2.40-1.1 [ 22s] [96/98] cumulate libsoftokn3-3.98-1.13 [ 22s] [97/98] cumulate rpm-4.14.1.1-1.12 [ 22s] [98/98] cumulate rpm-build-4.14.1.1-1.12 [ 22s] now installing cumulated packages [ 23s] Preparing... ######################################## [ 23s] Updating / installing... [ 23s] setup-0.9-1.4 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 23s] ########################## [ 23s] filesystem-3.1-1.1 ######################################## [ 23s] libmagic-data-5.45-1.8 ######################################## [ 24s] glibc-2.40-1.1 ######################################## [ 24s] libgcc-14.2.0-1.11 ######################################## [ 25s] bash-3.2.57-1.1 ######################################## [ 25s] zlib-1.3.1-1.4 ######################################## [ 25s] coreutils-6.9-14.4 ######################################## [ 26s] libstdc++-14.2.0-1.11 ######################################## [ 26s] libbz2-1.0.8-1.8 ######################################## [ 26s] liblzma-5.6.3-1.4 ######################################## [ 26s] libelf-0.189-1.11 ######################################## [ 27s] libdw-0.189-1.11 ######################################## [ 27s] libxcrypt-4.4.36-1.11 ######################################## [ 28s] libmagic-5.45-1.8 ######################################## [ 28s] libblkid-2.39.3-1.8 ######################################## [ 28s] nspr-4.35-1.8 ######################################## [ 28s] pam-1.1.6-1.7 ######################################## [ 29s] libcap-2.69-1.9 ######################################## [ 29s] libfreebl3-3.98-1.13 ######################################## [ 29s] liblua-5.1.5-1.8 ######################################## [ 30s] libpopt-1.16-1.7 ######################################## [ 30s] libuuid-2.39.3-1.8 ######################################## [ 30s] libzstd1-1.5.6-1.4 ######################################## [ 31s] linux-glibc-devel-6.6-1.12 ######################################## [ 31s] terminfo-base-full-6.4-1.12 ######################################## [ 31s] libncurses6-6.4-1.12 ######################################## [ 31s] libreadline-5.2-1.8 ######################################## [ 32s] libfdisk-2.39.3-1.8 ######################################## [ 32s] nss-certs-3.98-1.13 ######################################## [ 32s] libmount-2.39.3-1.8 ######################################## [ 32s] libasm-0.189-1.11 ######################################## [ 32s] libxml2-2.12.5-1.9 ######################################## [ 33s] xz-5.6.3-1.4 ######################################## [ 33s] bzip2-1.0.8-1.8 ######################################## [ 33s] libcc1-14.2.0-1.11 ######################################## [ 33s] libubsan-14.2.0-1.11 ######################################## [ 33s] gzip-1.3.12-1.8 ######################################## [ 33s] binutils-libs-2.43-1.12 ######################################## [ 34s] binutils-2.43-1.12 ######################################## [ 34s] make-4.4-1.8 ######################################## [ 34s] findutils-4.3.8-1.8 ######################################## [ 34s] gdbm-1.8.3-1.12 ######################################## [ 38s] perl-5.38.0-1.8 ######################################## [ 38s] build-mkbaselibs-20120927-1.1 ######################################## [ 38s] libattr-2.5.1-1.8 ######################################## [ 39s] libacl-2.3.2-1.9 ######################################## [ 39s] tar-1.17-1.1 ######################################## [ 39s] libgfortran-14.2.0-1.11 ######################################## [ 39s] libgomp-14.2.0-1.11 ######################################## [ 40s] libitm-14.2.0-1.11 ######################################## [ 40s] libltdl-2.4.7-1.12 ######################################## [ 40s] libopenssl3-3.0.13-1.12 ######################################## [ 40s] libarchive-3.7.2-1.10 ######################################## [ 41s] libpcre-8.45-1.8 ######################################## [ 41s] libsmack-1.3.1-1.7 ######################################## [ 41s] libsmartcols-2.39.3-1.8 ######################################## [ 42s] libsqlite-3.48.0-1.4 ######################################## [ 42s] libsoftokn3-3.98-1.13 ######################################## [ 42s] nss-3.98-1.13 ######################################## [ 44s] rpm-4.14.1.1-1.12 ######################################## [ 44s] m4-1.4.19-1.1 ######################################## [ 44s] autoconf-2.71-1.11 ######################################## [ 45s] automake-1.16.5-1.12 ######################################## [ 45s] patch-2.7.6-1.7 ######################################## [ 45s] pkg-config-0.29.2-1.8 ######################################## [ 45s] sed-4.1c-1.8 ######################################## [ 45s] util-linux-2.39.3-1.8 ######################################## [ 45s] libatomic-14.2.0-1.11 ######################################## [ 46s] libtool-2.4.7-1.12 ######################################## [ 46s] build-20120927-1.1 ######################################## [ 46s] libncurses-6.4-1.12 ######################################## [ 47s] libstdc++-devel-14.2.0-1.11 ######################################## [ 47s] build-compare-2023.06.18-1.4 ######################################## [ 47s] hal-rootstrap-checker-0.1.0-2.1 ######################################## [ 52s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 56s] gcc-14.2.0-1.11 ######################################## [ 56s] libxcrypt-devel-4.4.36-1.11 ######################################## [ 56s] glibc-devel-2.40-1.1 ######################################## [ 72s] qemu-accel-x86_64-armv7l-0.4-1.4 ######################################## [ 73s] rpm-build-4.14.1.1-1.12 ######################################## [ 73s] util-linux-su-2.39.3-1.8 ######################################## [ 73s] smack-1.3.1-1.7 ######################################## [ 73s] grep-2.5.2-1.7 ######################################## [ 73s] elfutils-0.189-1.11 ######################################## [ 73s] less-668-1.1 ######################################## [ 73s] file-5.45-1.8 ######################################## [ 73s] glibc-locale-2.40-1.1 ######################################## [ 74s] tzdata-2023c-1.1 ######################################## [ 75s] cpp-14.2.0-1.11 ######################################## [ 76s] gcc-c++-14.2.0-1.11 ######################################## [ 76s] gawk-3.1.5-1.1 ######################################## [ 76s] cpio-2.8-1.1 ######################################## [ 77s] diffutils-3.10-1.1 ######################################## [ 77s] hostname-3.23-1.1 ######################################## [ 77s] net-tools-2.0_20121208git-1.7 ######################################## [ 77s] update-alternatives-1.22.2-1.1 ######################################## [ 77s] which-2.17-1.1 ######################################## [ 77s] now finalizing build dir... [ 79s] ----------------------------------------------------------------- [ 79s] I have the following modifications for configure-dumper.spec: [ 79s] 21c21 [ 79s] < Release: 0 [ 79s] --- [ 79s] > Release: 2.1 [ 79s] build target is armv7l-tizen-linux [ 79s] ----------------------------------------------------------------- [ 79s] ----- building configure-dumper.spec (user abuild) [ 79s] ----------------------------------------------------------------- [ 79s] ----------------------------------------------------------------- [ 79s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/8b72f7f7f31f11a165661df438555159-configure-dumper' /home/abuild/rpmbuild/SOURCES/configure-dumper.spec [ 79s] Building target platforms: armv7l-tizen-linux [ 79s] Building for target armv7l-tizen-linux [ 79s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.TXBHON [ 79s] + umask 022 [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + rm -rf configure-dumper-1.1 [ 79s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/configure-dumper-1.1.tar.gz [ 79s] + /bin/tar -xof - [ 79s] + STATUS=0 [ 79s] + '[' 0 -ne 0 ']' [ 79s] + cd configure-dumper-1.1 [ 79s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 79s] + cp /home/abuild/rpmbuild/SOURCES/autoconf-2.64.tar.gz . [ 79s] + cp /home/abuild/rpmbuild/SOURCES/autoconf-2.69.tar.gz . [ 79s] + cp /home/abuild/rpmbuild/SOURCES/autoconf-2.72.tar.gz . [ 80s] + cp /home/abuild/rpmbuild/SOURCES/configure-dumper.manifest . [ 80s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 80s] + /bin/tar -xf autoconf-2.64.tar.gz [ 80s] + /bin/tar -xf autoconf-2.69.tar.gz [ 80s] + /bin/tar -xf autoconf-2.72.tar.gz [ 80s] + exit 0 [ 80s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.lIBcu0 [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd configure-dumper-1.1 [ 80s] + ref=/usr/lib/rpm [ 80s] + mints=0 [ 80s] + case $(uname -m) in [ 80s] ++ uname -m [ 80s] + for s in guess sub [ 80s] ++ find -maxdepth 8 -name config.guess [ 80s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 80s] + grep -q config-patches@ ./autoconf-2.69/build-aux/config.guess [ 80s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./autoconf-2.69/build-aux/config.guess [ 80s] ++ tr -d $'\r' [ 80s] + timestamp=20230101 [ 80s] + test -n 20230101 [ 80s] + test 20230101 -ge 0 [ 80s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 80s] + grep -q config-patches@ ./autoconf-2.64/build-aux/config.guess [ 80s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./autoconf-2.64/build-aux/config.guess [ 80s] ++ tr -d $'\r' [ 80s] + timestamp=20230101 [ 80s] + test -n 20230101 [ 80s] + test 20230101 -ge 0 [ 80s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 80s] + grep -q config-patches@ ./autoconf-2.72/build-aux/config.guess [ 80s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./autoconf-2.72/build-aux/config.guess [ 80s] ++ tr -d $'\r' [ 80s] + timestamp=20230822 [ 80s] + test -n 20230822 [ 80s] + test 20230822 -ge 0 [ 80s] + for s in guess sub [ 80s] ++ find -maxdepth 8 -name config.sub [ 80s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 80s] + grep -q config-patches@ ./autoconf-2.69/build-aux/config.sub [ 80s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./autoconf-2.69/build-aux/config.sub [ 80s] ++ tr -d $'\r' [ 80s] + timestamp=20230121 [ 80s] + test -n 20230121 [ 80s] + test 20230121 -ge 0 [ 80s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 80s] + grep -q config-patches@ ./autoconf-2.64/build-aux/config.sub [ 80s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./autoconf-2.64/build-aux/config.sub [ 80s] ++ tr -d $'\r' [ 80s] + timestamp=20230121 [ 80s] + test -n 20230121 [ 80s] + test 20230121 -ge 0 [ 80s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 80s] + grep -q config-patches@ ./autoconf-2.72/build-aux/config.sub [ 80s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./autoconf-2.72/build-aux/config.sub [ 80s] ++ tr -d $'\r' [ 80s] + timestamp=20230919 [ 80s] + test -n 20230919 [ 80s] + test 20230919 -ge 0 [ 80s] + LANG=C [ 80s] + export LANG [ 80s] + unset DISPLAY [ 80s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 80s] + export CFLAGS [ 80s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 80s] + export CXXFLAGS [ 80s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 80s] + export FFLAGS [ 80s] + LDFLAGS= [ 80s] + export LDFLAGS [ 80s] + cd autoconf-2.64 [ 80s] + ./configure --prefix=/usr/local/autoconf-2.64 [ 81s] checking for a BSD-compatible install... /bin/install -c [ 82s] checking whether build environment is sane... yes [ 82s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 82s] checking for gawk... gawk [ 82s] checking whether make sets $(MAKE)... yes [ 82s] checking whether /bin/sh -n is known to work... yes [ 82s] checking for characters that cannot appear in file names... none [ 82s] checking whether directories can have trailing spaces... yes [ 82s] checking for expr... /bin/expr [ 82s] checking for GNU M4 that supports accurate traces... /bin/m4 [ 82s] checking whether /bin/m4 accepts --gnu... yes [ 82s] checking how m4 supports trace files... --debugfile [ 82s] checking for perl... /bin/perl [ 82s] checking for emacs... no [ 82s] checking for xemacs... no [ 82s] checking for emacs... no [ 82s] checking where .elc files should go... ${datadir}/emacs/site-lisp [ 82s] checking for grep that handles long lines and -e... /bin/grep [ 82s] checking for egrep... /bin/grep -E [ 82s] checking for a sed that does not truncate output... /bin/sed [ 82s] checking whether make is case sensitive... yes [ 82s] configure: creating ./config.status [ 83s] config.status: creating tests/Makefile [ 83s] config.status: creating tests/atlocal [ 83s] config.status: creating man/Makefile [ 83s] config.status: creating lib/emacs/Makefile [ 83s] config.status: creating Makefile [ 83s] config.status: creating doc/Makefile [ 83s] config.status: creating lib/Makefile [ 83s] config.status: creating lib/Autom4te/Makefile [ 84s] config.status: creating lib/autoscan/Makefile [ 84s] config.status: creating lib/m4sugar/Makefile [ 84s] config.status: creating lib/autoconf/Makefile [ 84s] config.status: creating lib/autotest/Makefile [ 84s] config.status: creating bin/Makefile [ 84s] config.status: executing tests/atconfig commands [ 84s] + make -j12 [ 84s] make all-recursive [ 84s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64' [ 84s] Making all in bin [ 84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/bin' [ 84s] rm -f autom4te autom4te.tmp [ 84s] cd ../lib && make autom4te.cfg [ 84s] cd ../lib/m4sugar && make version.m4 [ 84s] rm -f autoheader autoheader.tmp [ 84s] rm -f autoreconf autoreconf.tmp [ 84s] srcdir=''; \ [ 84s] test -f ./autom4te.in || srcdir=./; \ [ 84s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@bindir[@]|/usr/local/autoconf-2.64/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.64/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.64|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autom4te.in; do not edit by hand.|g' ${srcdir}autom4te.in >autom4te.tmp [ 84s] rm -f ifnames ifnames.tmp [ 84s] srcdir=''; \ [ 84s] test -f ./autoheader.in || srcdir=./; \ [ 84s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@bindir[@]|/usr/local/autoconf-2.64/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.64/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.64|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoheader.in; do not edit by hand.|g' ${srcdir}autoheader.in >autoheader.tmp [ 84s] srcdir=''; \ [ 84s] test -f ./autoreconf.in || srcdir=./; \ [ 84s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@bindir[@]|/usr/local/autoconf-2.64/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.64/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.64|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoreconf.in; do not edit by hand.|g' ${srcdir}autoreconf.in >autoreconf.tmp [ 84s] srcdir=''; \ [ 84s] test -f ./ifnames.in || srcdir=./; \ [ 84s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@bindir[@]|/usr/local/autoconf-2.64/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.64/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.64|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from ifnames.in; do not edit by hand.|g' ${srcdir}ifnames.in >ifnames.tmp [ 84s] rm -f autoscan autoscan.tmp [ 84s] rm -f autoupdate autoupdate.tmp [ 84s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib' [ 84s] rm -f autom4te.cfg autom4te.tmp [ 84s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/m4sugar' [ 84s] :;{ \ [ 84s] echo '# This file is part of -*- Autoconf -*-.' && \ [ 84s] echo '# Version of Autoconf.' && \ [ 84s] echo '# Copyright (C) 1999, 2000, 2001, 2002, 2006, 2007, 2009' && \ [ 84s] echo '# Free Software Foundation, Inc.' && \ [ 84s] echo &&\ [ 84s] echo 'm4_define([m4_PACKAGE_NAME], [GNU Autoconf])' && \ [ 84s] echo 'm4_define([m4_PACKAGE_TARNAME], [autoconf])' && \ [ 84s] echo 'm4_define([m4_PACKAGE_VERSION], [2.64])' && \ [ 84s] echo 'm4_define([m4_PACKAGE_STRING], [GNU Autoconf 2.64])' && \ [ 84s] echo 'm4_define([m4_PACKAGE_BUGREPORT], [bug-autoconf@gnu.org])' && \ [ 84s] echo 'm4_define([m4_PACKAGE_URL], [http://www.gnu.org/software/autoconf/])' && \ [ 84s] echo 'm4_define([m4_PACKAGE_YEAR], ['`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../../ChangeLog`'])'; \ [ 84s] } > version.m4-t [ 84s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@bindir[@]|/usr/local/autoconf-2.64/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.64/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.64|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@AWK[@]|gawk|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' ./autom4te.in >autom4te.tmp [ 84s] mv version.m4-t version.m4 [ 84s] chmod a-w autom4te.tmp [ 84s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/m4sugar' [ 84s] chmod +x autom4te.tmp [ 84s] chmod +x autoheader.tmp [ 84s] chmod +x autoreconf.tmp [ 84s] chmod +x ifnames.tmp [ 84s] srcdir=''; \ [ 84s] test -f ./autoscan.in || srcdir=./; \ [ 84s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@bindir[@]|/usr/local/autoconf-2.64/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.64/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.64|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoscan.in; do not edit by hand.|g' ${srcdir}autoscan.in >autoscan.tmp [ 84s] srcdir=''; \ [ 84s] test -f ./autoupdate.in || srcdir=./; \ [ 84s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@bindir[@]|/usr/local/autoconf-2.64/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.64/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.64|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoupdate.in; do not edit by hand.|g' ${srcdir}autoupdate.in >autoupdate.tmp [ 84s] chmod a-w autoheader.tmp [ 84s] chmod +x autoscan.tmp [ 84s] chmod +x autoupdate.tmp [ 84s] mv autom4te.tmp autom4te.cfg [ 84s] chmod a-w ifnames.tmp [ 84s] chmod a-w autom4te.tmp [ 84s] chmod a-w autoreconf.tmp [ 84s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib' [ 84s] chmod a-w autoscan.tmp [ 84s] chmod a-w autoupdate.tmp [ 84s] mv ifnames.tmp ifnames [ 84s] mv autoreconf.tmp autoreconf [ 84s] mv autoheader.tmp autoheader [ 84s] mv autom4te.tmp autom4te [ 84s] autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language M4sh --cache '' --melt ./autoconf.as -o autoconf.in [ 84s] mv autoupdate.tmp autoupdate [ 84s] mv autoscan.tmp autoscan [ 85s] rm -f autoconf autoconf.tmp [ 85s] srcdir=''; \ [ 85s] test -f ./autoconf.in || srcdir=./; \ [ 85s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@bindir[@]|/usr/local/autoconf-2.64/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.64/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.64|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoconf.in; do not edit by hand.|g' ${srcdir}autoconf.in >autoconf.tmp [ 85s] chmod +x autoconf.tmp [ 85s] chmod a-w autoconf.tmp [ 85s] mv autoconf.tmp autoconf [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/bin' [ 85s] Making all in . [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64' [ 85s] make[2]: Nothing to be done for 'all-am'. [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64' [ 85s] Making all in lib [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib' [ 85s] Making all in Autom4te [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/Autom4te' [ 85s] make[3]: Nothing to be done for 'all'. [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/Autom4te' [ 85s] Making all in m4sugar [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/m4sugar' [ 85s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ [ 85s] --language=m4sugar \ [ 85s] --freeze \ [ 85s] --output=m4sugar.m4f [ 85s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ [ 85s] --language=m4sh \ [ 85s] --freeze \ [ 85s] --output=m4sh.m4f [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/m4sugar' [ 86s] Making all in autoconf [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autoconf' [ 86s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ [ 86s] --language=autoconf \ [ 86s] --freeze \ [ 86s] --output=autoconf.m4f [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autoconf' [ 87s] Making all in autotest [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autotest' [ 87s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ [ 87s] --language=autotest \ [ 87s] --freeze \ [ 87s] --output=autotest.m4f [ 88s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autotest' [ 88s] Making all in autoscan [ 88s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autoscan' [ 88s] echo '# Automatically Generated: do not edit this file' >autoscan.list [ 88s] sed '/^[#]/!q' ./autoscan.pre >>autoscan.list [ 88s] ( \ [ 88s] sed -n '/^[^#]/p' ./autoscan.pre; \ [ 88s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib --cache '' -M -l autoconf -t'AN_OUTPUT:$1: $2 $3' \ [ 88s] ) | LC_ALL=C sort >>autoscan.list [ 89s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autoscan' [ 89s] Making all in emacs [ 89s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/emacs' [ 89s] WARNING: Warnings can be ignored. :-) [ 89s] if test "no" != no; then \ [ 89s] set x; \ [ 89s] list='autoconf-mode.el autotest-mode.el'; for p in $list; do \ [ 89s] if test -f "$p"; then d=; else d="./"; fi; \ [ 89s] set x "$@" "$d$p"; shift; \ [ 89s] done; \ [ 89s] shift; \ [ 89s] EMACS="no" /bin/sh ../../build-aux/elisp-comp "$@" || exit 1; \ [ 89s] else : ; fi [ 89s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/emacs' [ 89s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib' [ 89s] make[3]: Nothing to be done for 'all-am'. [ 89s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib' [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib' [ 89s] Making all in doc [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/doc' [ 89s] make[2]: Nothing to be done for 'all'. [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/doc' [ 89s] Making all in tests [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/tests' [ 89s] autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language=M4sh ./wrapper.as -o wrapper.in [ 89s] rm -f autoconf autoconf.tmp [ 89s] rm -f autoheader autoheader.tmp [ 89s] rm -f autom4te autom4te.tmp [ 89s] rm -f autoreconf autoreconf.tmp [ 89s] rm -f autoscan autoscan.tmp [ 89s] rm -f autoupdate autoupdate.tmp [ 89s] input=wrapper.in; \ [ 89s] sed -e 's|@wrap_program[@]|autoconf|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoconf.tmp [ 89s] rm -f ifnames ifnames.tmp [ 89s] input=wrapper.in; \ [ 89s] sed -e 's|@wrap_program[@]|autoheader|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoheader.tmp [ 89s] input=wrapper.in; \ [ 89s] sed -e 's|@wrap_program[@]|autom4te|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autom4te.tmp [ 89s] input=wrapper.in; \ [ 89s] sed -e 's|@wrap_program[@]|autoreconf|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoreconf.tmp [ 89s] input=wrapper.in; \ [ 89s] sed -e 's|@wrap_program[@]|autoscan|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoscan.tmp [ 89s] input=wrapper.in; \ [ 89s] sed -e 's|@wrap_program[@]|autoupdate|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoupdate.tmp [ 89s] input=wrapper.in; \ [ 89s] sed -e 's|@wrap_program[@]|ifnames|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >ifnames.tmp [ 89s] chmod +x autoconf.tmp [ 89s] chmod +x autoreconf.tmp [ 89s] chmod +x autoheader.tmp [ 89s] chmod +x autom4te.tmp [ 89s] chmod +x autoscan.tmp [ 89s] chmod +x autoupdate.tmp [ 89s] chmod +x ifnames.tmp [ 89s] chmod a-w ifnames.tmp [ 89s] chmod a-w autoheader.tmp [ 89s] mv -f autoheader.tmp autoheader [ 89s] chmod a-w autoreconf.tmp [ 89s] chmod a-w autom4te.tmp [ 89s] chmod a-w autoconf.tmp [ 89s] chmod a-w autoscan.tmp [ 89s] chmod a-w autoupdate.tmp [ 89s] mv -f ifnames.tmp ifnames [ 89s] mv -f autom4te.tmp autom4te [ 89s] mv -f autoreconf.tmp autoreconf [ 89s] mv -f autoupdate.tmp autoupdate [ 89s] mv -f autoconf.tmp autoconf [ 89s] mv -f autoscan.tmp autoscan [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/tests' [ 89s] Making all in man [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/man' [ 89s] Updating man page config.guess.1 [ 89s] PATH="../tests:../build-aux:$PATH"; \ [ 89s] export PATH; \ [ 89s] /bin/sh /home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/build-aux/missing --run help2man \ [ 89s] --include=config.guess.x \ [ 89s] --include=./common.x \ [ 89s] --source='GNU Autoconf 2.64' \ [ 89s] --output=config.guess.1.t `echo 'config.guess' | sed 's,.*/,,'` [ 89s] Updating man page config.sub.1 [ 89s] PATH="../tests:../build-aux:$PATH"; \ [ 89s] export PATH; \ [ 89s] /bin/sh /home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/build-aux/missing --run help2man \ [ 89s] --include=config.sub.x \ [ 89s] --include=./common.x \ [ 89s] --source='GNU Autoconf 2.64' \ [ 89s] --output=config.sub.1.t `echo 'config.sub' | sed 's,.*/,,'` [ 89s] /home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/build-aux/missing: line 52: help2man: command not found [ 89s] /home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/build-aux/missing: line 52: help2man: command not found [ 89s] WARNING: `help2man' is missing on your system. You should only need it if [ 89s] you modified a dependency of a manual page. You may need the [ 89s] `Help2man' package in order for those modifications to take [ 89s] effect. You can get `Help2man' from any GNU archive site. [ 89s] WARNING: `help2man' is missing on your system. You should only need it if [ 89s] you modified a dependency of a manual page. You may need the [ 89s] `Help2man' package in order for those modifications to take [ 89s] effect. You can get `Help2man' from any GNU archive site. [ 89s] if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.sub.1 >config.sub.1a.t 2>/dev/null && \ [ 89s] sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.sub.1.t | cmp config.sub.1a.t - >/dev/null 2>&1; then \ [ 89s] touch config.sub.1; \ [ 89s] else \ [ 89s] mv config.sub.1.t config.sub.1; \ [ 89s] fi [ 89s] if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.guess.1 >config.guess.1a.t 2>/dev/null && \ [ 89s] sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.guess.1.t | cmp config.guess.1a.t - >/dev/null 2>&1; then \ [ 89s] touch config.guess.1; \ [ 89s] else \ [ 89s] mv config.guess.1.t config.guess.1; \ [ 89s] fi [ 89s] rm -f config.guess.1*.t [ 89s] rm -f config.sub.1*.t [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/man' [ 89s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64' [ 89s] + cd ../autoconf-2.69 [ 89s] + ./configure --prefix=/usr/local/autoconf-2.69 [ 90s] checking for a BSD-compatible install... /bin/install -c [ 91s] checking whether build environment is sane... yes [ 91s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 91s] checking for gawk... gawk [ 91s] checking whether make sets $(MAKE)... yes [ 91s] checking build system type... armv7l-unknown-linux-gnueabi [ 91s] checking host system type... armv7l-unknown-linux-gnueabi [ 91s] configure: autobuild project... GNU Autoconf [ 91s] configure: autobuild revision... 2.69 [ 91s] configure: autobuild hostname... 58ddb04e8dc7 [ 91s] configure: autobuild timestamp... 20241227T081529Z [ 91s] checking whether /bin/sh -n is known to work... yes [ 91s] checking for characters that cannot appear in file names... none [ 91s] checking whether directories can have trailing spaces... yes [ 91s] checking for expr... /bin/expr [ 91s] checking for GNU M4 that supports accurate traces... /bin/m4 [ 91s] checking whether /bin/m4 accepts --gnu... yes [ 91s] checking how m4 supports trace files... --debugfile [ 91s] checking for perl... /bin/perl [ 92s] checking whether /bin/perl Fcntl::flock is implemented... yes [ 92s] checking for emacs... no [ 92s] checking for xemacs... no [ 92s] checking for emacs... no [ 92s] checking where .elc files should go... ${datadir}/emacs/site-lisp [ 92s] checking for grep that handles long lines and -e... /bin/grep [ 92s] checking for egrep... /bin/grep -E [ 92s] checking for a sed that does not truncate output... /bin/sed [ 92s] checking whether make is case sensitive... yes [ 92s] configure: creating ./config.status [ 92s] config.status: creating tests/Makefile [ 92s] config.status: creating tests/atlocal [ 92s] config.status: creating man/Makefile [ 92s] config.status: creating lib/emacs/Makefile [ 92s] config.status: creating Makefile [ 92s] config.status: creating doc/Makefile [ 92s] config.status: creating lib/Makefile [ 92s] config.status: creating lib/Autom4te/Makefile [ 92s] config.status: creating lib/autoscan/Makefile [ 92s] config.status: creating lib/m4sugar/Makefile [ 92s] config.status: creating lib/autoconf/Makefile [ 92s] config.status: creating lib/autotest/Makefile [ 92s] config.status: creating bin/Makefile [ 93s] config.status: executing tests/atconfig commands [ 93s] + make -j12 [ 93s] make all-recursive [ 93s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69' [ 93s] Making all in bin [ 93s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/bin' [ 93s] rm -f autom4te autom4te.tmp [ 93s] cd ../lib && make autom4te.cfg [ 93s] cd ../lib/m4sugar && make version.m4 [ 93s] rm -f autoheader autoheader.tmp [ 93s] srcdir=''; \ [ 93s] test -f ./autom4te.in || srcdir=./; \ [ 93s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.69/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.69/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.69|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autom4te.in; do not edit by hand.|g' ${srcdir}autom4te.in >autom4te.tmp [ 93s] rm -f autoreconf autoreconf.tmp [ 93s] rm -f ifnames ifnames.tmp [ 93s] srcdir=''; \ [ 93s] test -f ./autoheader.in || srcdir=./; \ [ 93s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.69/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.69/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.69|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoheader.in; do not edit by hand.|g' ${srcdir}autoheader.in >autoheader.tmp [ 93s] rm -f autoscan autoscan.tmp [ 93s] srcdir=''; \ [ 93s] test -f ./autoreconf.in || srcdir=./; \ [ 93s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.69/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.69/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.69|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoreconf.in; do not edit by hand.|g' ${srcdir}autoreconf.in >autoreconf.tmp [ 93s] rm -f autoupdate autoupdate.tmp [ 93s] srcdir=''; \ [ 93s] test -f ./ifnames.in || srcdir=./; \ [ 93s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.69/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.69/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.69|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from ifnames.in; do not edit by hand.|g' ${srcdir}ifnames.in >ifnames.tmp [ 93s] srcdir=''; \ [ 93s] test -f ./autoscan.in || srcdir=./; \ [ 93s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.69/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.69/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.69|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoscan.in; do not edit by hand.|g' ${srcdir}autoscan.in >autoscan.tmp [ 93s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib' [ 93s] srcdir=''; \ [ 93s] test -f ./autoupdate.in || srcdir=./; \ [ 93s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.69/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.69/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.69|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoupdate.in; do not edit by hand.|g' ${srcdir}autoupdate.in >autoupdate.tmp [ 93s] rm -f autom4te.cfg autom4te.tmp [ 93s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/m4sugar' [ 93s] :;{ \ [ 93s] echo '# This file is part of -*- Autoconf -*-.' && \ [ 93s] echo '# Version of Autoconf.' && \ [ 93s] echo '# Copyright (C) 1999, 2000, 2001, 2002, 2006, 2007, 2009' && \ [ 93s] echo '# Free Software Foundation, Inc.' && \ [ 93s] echo &&\ [ 93s] echo 'm4_define([m4_PACKAGE_NAME], [GNU Autoconf])' && \ [ 93s] echo 'm4_define([m4_PACKAGE_TARNAME], [autoconf])' && \ [ 93s] echo 'm4_define([m4_PACKAGE_VERSION], [2.69])' && \ [ 93s] echo 'm4_define([m4_PACKAGE_STRING], [GNU Autoconf 2.69])' && \ [ 93s] echo 'm4_define([m4_PACKAGE_BUGREPORT], [bug-autoconf@gnu.org])' && \ [ 93s] echo 'm4_define([m4_PACKAGE_URL], [http://www.gnu.org/software/autoconf/])' && \ [ 93s] echo 'm4_define([m4_PACKAGE_YEAR], ['`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../../ChangeLog`'])'; \ [ 93s] } > version.m4-t [ 93s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@bindir[@]|/usr/local/autoconf-2.69/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.69/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.69|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@AWK[@]|gawk|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' ./autom4te.in >autom4te.tmp [ 93s] mv version.m4-t version.m4 [ 93s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/m4sugar' [ 93s] chmod +x ifnames.tmp [ 93s] chmod +x autoheader.tmp [ 93s] chmod +x autom4te.tmp [ 93s] chmod a-w autom4te.tmp [ 93s] chmod +x autoreconf.tmp [ 93s] chmod +x autoscan.tmp [ 93s] chmod +x autoupdate.tmp [ 93s] chmod a-w ifnames.tmp [ 93s] chmod a-w autom4te.tmp [ 93s] chmod a-w autoheader.tmp [ 93s] mv autom4te.tmp autom4te.cfg [ 93s] chmod a-w autoscan.tmp [ 93s] chmod a-w autoreconf.tmp [ 93s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib' [ 93s] chmod a-w autoupdate.tmp [ 93s] mv autoheader.tmp autoheader [ 93s] mv ifnames.tmp ifnames [ 93s] mv autom4te.tmp autom4te [ 93s] autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language M4sh --cache '' --melt ./autoconf.as -o autoconf.in [ 93s] mv autoscan.tmp autoscan [ 93s] mv autoupdate.tmp autoupdate [ 93s] mv autoreconf.tmp autoreconf [ 94s] rm -f autoconf autoconf.tmp [ 94s] srcdir=''; \ [ 94s] test -f ./autoconf.in || srcdir=./; \ [ 94s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.69/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.69/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.69|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoconf.in; do not edit by hand.|g' ${srcdir}autoconf.in >autoconf.tmp [ 94s] chmod +x autoconf.tmp [ 94s] chmod a-w autoconf.tmp [ 94s] mv autoconf.tmp autoconf [ 94s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/bin' [ 94s] Making all in . [ 94s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69' [ 94s] make[2]: Nothing to be done for 'all-am'. [ 94s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69' [ 94s] Making all in lib [ 94s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib' [ 94s] Making all in Autom4te [ 94s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/Autom4te' [ 94s] make[3]: Nothing to be done for 'all'. [ 94s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/Autom4te' [ 94s] Making all in m4sugar [ 94s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/m4sugar' [ 94s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ [ 94s] --language=m4sugar \ [ 94s] --freeze \ [ 94s] --output=m4sugar.m4f [ 94s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ [ 94s] --language=m4sh \ [ 94s] --freeze \ [ 94s] --output=m4sh.m4f [ 95s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/m4sugar' [ 95s] Making all in autoconf [ 95s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autoconf' [ 95s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ [ 95s] --language=autoconf \ [ 95s] --freeze \ [ 95s] --output=autoconf.m4f [ 95s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autoconf' [ 95s] Making all in autotest [ 95s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autotest' [ 95s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ [ 95s] --language=autotest \ [ 95s] --freeze \ [ 95s] --output=autotest.m4f [ 96s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autotest' [ 96s] Making all in autoscan [ 96s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autoscan' [ 96s] echo '# Automatically Generated: do not edit this file' >autoscan.list [ 96s] sed '/^[#]/!q' ./autoscan.pre >>autoscan.list [ 96s] ( \ [ 96s] sed -n '/^[^#]/p' ./autoscan.pre; \ [ 96s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib --cache '' -M -l autoconf -t'AN_OUTPUT:$1: $2 $3' \ [ 96s] ) | LC_ALL=C sort >>autoscan.list [ 97s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autoscan' [ 97s] Making all in emacs [ 97s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/emacs' [ 97s] WARNING: Warnings can be ignored. :-) [ 97s] if test "no" != no; then \ [ 97s] set x; \ [ 97s] list='autoconf-mode.el autotest-mode.el'; for p in $list; do \ [ 97s] if test -f "$p"; then d=; else d="./"; fi; \ [ 97s] set x "$@" "$d$p"; shift; \ [ 97s] done; \ [ 97s] shift; \ [ 97s] EMACS="no" /bin/sh ../../build-aux/elisp-comp "$@" || exit 1; \ [ 97s] else : ; fi [ 97s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/emacs' [ 97s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib' [ 97s] make[3]: Nothing to be done for 'all-am'. [ 97s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib' [ 97s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib' [ 97s] Making all in doc [ 97s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/doc' [ 97s] make[2]: Nothing to be done for 'all'. [ 97s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/doc' [ 97s] Making all in tests [ 97s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/tests' [ 97s] autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language=M4sh ./wrapper.as -o wrapper.in [ 98s] rm -f autoconf autoconf.tmp [ 98s] rm -f autoheader autoheader.tmp [ 98s] input=wrapper.in; \ [ 98s] sed -e 's|@wrap_program[@]|autoconf|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoconf.tmp [ 98s] input=wrapper.in; \ [ 98s] sed -e 's|@wrap_program[@]|autoheader|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoheader.tmp [ 98s] rm -f autom4te autom4te.tmp [ 98s] rm -f autoreconf autoreconf.tmp [ 98s] rm -f autoscan autoscan.tmp [ 98s] rm -f autoupdate autoupdate.tmp [ 98s] rm -f ifnames ifnames.tmp [ 98s] input=wrapper.in; \ [ 98s] sed -e 's|@wrap_program[@]|autom4te|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autom4te.tmp [ 98s] input=wrapper.in; \ [ 98s] sed -e 's|@wrap_program[@]|autoreconf|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoreconf.tmp [ 98s] input=wrapper.in; \ [ 98s] sed -e 's|@wrap_program[@]|autoscan|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoscan.tmp [ 98s] input=wrapper.in; \ [ 98s] sed -e 's|@wrap_program[@]|autoupdate|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoupdate.tmp [ 98s] input=wrapper.in; \ [ 98s] sed -e 's|@wrap_program[@]|ifnames|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >ifnames.tmp [ 98s] chmod +x autoheader.tmp [ 98s] chmod +x autoconf.tmp [ 98s] chmod +x autom4te.tmp [ 98s] chmod +x autoreconf.tmp [ 98s] chmod +x autoscan.tmp [ 98s] chmod +x autoupdate.tmp [ 98s] chmod +x ifnames.tmp [ 98s] chmod a-w autoheader.tmp [ 98s] chmod a-w autoconf.tmp [ 98s] chmod a-w autom4te.tmp [ 98s] chmod a-w ifnames.tmp [ 98s] chmod a-w autoscan.tmp [ 98s] mv -f autoheader.tmp autoheader [ 98s] mv -f autoconf.tmp autoconf [ 98s] mv -f autom4te.tmp autom4te [ 98s] chmod a-w autoreconf.tmp [ 98s] chmod a-w autoupdate.tmp [ 98s] mv -f ifnames.tmp ifnames [ 98s] mv -f autoscan.tmp autoscan [ 98s] mv -f autoreconf.tmp autoreconf [ 98s] mv -f autoupdate.tmp autoupdate [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/tests' [ 98s] Making all in man [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/man' [ 98s] Updating man page config.guess.1 [ 98s] PATH="../tests:../build-aux:$PATH"; \ [ 98s] export PATH; \ [ 98s] /bin/sh /home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/build-aux/missing --run help2man \ [ 98s] --include=config.guess.x \ [ 98s] --include=./common.x \ [ 98s] --source='GNU Autoconf 2.69' \ [ 98s] --output=config.guess.1.t `echo 'config.guess' | sed 's,.*/,,'` [ 98s] Updating man page config.sub.1 [ 98s] PATH="../tests:../build-aux:$PATH"; \ [ 98s] export PATH; \ [ 98s] /bin/sh /home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/build-aux/missing --run help2man \ [ 98s] --include=config.sub.x \ [ 98s] --include=./common.x \ [ 98s] --source='GNU Autoconf 2.69' \ [ 98s] --output=config.sub.1.t `echo 'config.sub' | sed 's,.*/,,'` [ 98s] /home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/build-aux/missing: line 51: help2man: command not found [ 98s] /home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/build-aux/missing: line 51: help2man: command not found [ 98s] WARNING: 'help2man' is missing on your system. You should only need it if [ 98s] you modified a dependency of a manual page. You may need the [ 98s] Help2man package in order for those modifications to take [ 98s] effect. You can get Help2man from any GNU archive site. [ 98s] if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.guess.1 >config.guess.1a.t 2>/dev/null && \ [ 98s] sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.guess.1.t | cmp config.guess.1a.t - >/dev/null 2>&1; then \ [ 98s] touch config.guess.1; \ [ 98s] else \ [ 98s] mv config.guess.1.t config.guess.1; \ [ 98s] fi [ 98s] WARNING: 'help2man' is missing on your system. You should only need it if [ 98s] you modified a dependency of a manual page. You may need the [ 98s] Help2man package in order for those modifications to take [ 98s] effect. You can get Help2man from any GNU archive site. [ 98s] if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.sub.1 >config.sub.1a.t 2>/dev/null && \ [ 98s] sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.sub.1.t | cmp config.sub.1a.t - >/dev/null 2>&1; then \ [ 98s] touch config.sub.1; \ [ 98s] else \ [ 98s] mv config.sub.1.t config.sub.1; \ [ 98s] fi [ 98s] rm -f config.guess.1*.t [ 98s] rm -f config.sub.1*.t [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/man' [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69' [ 98s] + cd ../autoconf-2.72 [ 98s] + ./configure --prefix=/usr/local/autoconf-2.72 [ 99s] checking for a BSD-compatible install... /bin/install -c [ 99s] checking whether build environment is sane... yes [ 99s] checking for a race-free mkdir -p... /bin/mkdir -p [ 99s] checking for gawk... gawk [ 99s] checking whether make sets $(MAKE)... yes [ 99s] checking whether make supports nested variables... yes [ 100s] checking build system type... armv7l-unknown-linux-gnueabi [ 100s] checking host system type... armv7l-unknown-linux-gnueabi [ 100s] configure: autobuild project... GNU Autoconf [ 100s] configure: autobuild revision... 2.72 [ 100s] configure: autobuild hostname... 58ddb04e8dc7 [ 100s] configure: autobuild timestamp... 20241227T081538Z [ 100s] checking for a shell whose -n mode is known to work... /bin/sh [ 100s] checking for characters that cannot appear in file names... none [ 100s] checking whether directories can have trailing spaces... yes [ 100s] checking for expr... /bin/expr [ 100s] checking for GNU M4 that supports accurate traces... /bin/m4 [ 100s] checking whether /bin/m4 accepts --gnu... yes [ 100s] checking how m4 supports trace files... --debugfile [ 100s] checking for perl... /bin/perl [ 101s] checking whether /bin/perl Fcntl::flock is implemented... yes [ 101s] checking for emacs... no [ 101s] checking for xemacs... no [ 101s] checking for emacs... no [ 101s] checking where .elc files should go... ${datadir}/emacs/site-lisp [ 101s] checking for grep that handles long lines and -e... /bin/grep [ 101s] checking for egrep... /bin/grep -E [ 101s] checking for a sed that does not truncate output... /bin/sed [ 101s] checking whether make is case sensitive... yes [ 101s] checking that generated files are newer than configure... done [ 101s] configure: creating ./config.status [ 101s] config.status: creating tests/atlocal [ 101s] config.status: creating Makefile [ 101s] config.status: creating lib/version.m4 [ 101s] config.status: executing tests/atconfig commands [ 101s] [ 101s] You are about to use an experimental version of Autoconf. Be sure to [ 101s] read the relevant mailing lists, most importantly . [ 101s] [ 101s] Below you will find information on the status of this version of Autoconf. [ 101s] [ 101s] * Status [ 101s] [ 101s] /*------------------------------------. [ 101s] | New features need further testing. | [ 101s] `------------------------------------*/ [ 101s] [ 101s] * Autotest parallel testsuite support is still a work in progress. [ 101s] There are known issues in job handling under dash and some ksh [ 101s] variants, where a parallel testsuite can hang or cause a 100% [ 101s] processor load. In the current release, the overall autoconf [ 101s] testsuite only exercises parallel autotest under bash and zsh, or if [ 101s] you have defined TEST_PARALLEL_AUTOTEST in the environment. [ 101s] Meanwhile, Cygwin has known problems with named fifos that cause [ 101s] failures when attempting parallel tests in an autotest suite. It is [ 101s] possible that other difficulties will be encountered, whether with [ 101s] shell or platform limitations; help is appreciated in improving [ 101s] parallel testsuite support. [ 101s] [ 102s] + make -j12 [ 102s] make all-am [ 102s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72' [ 102s] rm -f bin/autoconf bin/autoconf.tmp [ 102s] rm -f bin/autoheader bin/autoheader.tmp [ 102s] /bin/mkdir -p bin [ 102s] /bin/mkdir -p bin [ 102s] srcdir=''; \ [ 102s] test -f ./bin/autoconf.in || srcdir=./; \ [ 102s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.72/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.72/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.72|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|2023|g' -e 's|@VERSION[@]|2.72|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from bin/autoconf.in; do not edit by hand.|g' ${srcdir}bin/autoconf.in >bin/autoconf.tmp [ 102s] rm -f bin/autom4te bin/autom4te.tmp [ 102s] srcdir=''; \ [ 102s] test -f ./bin/autoheader.in || srcdir=./; \ [ 102s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.72/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.72/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.72|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|2023|g' -e 's|@VERSION[@]|2.72|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from bin/autoheader.in; do not edit by hand.|g' ${srcdir}bin/autoheader.in >bin/autoheader.tmp [ 102s] rm -f bin/autoreconf bin/autoreconf.tmp [ 102s] /bin/mkdir -p bin [ 102s] /bin/mkdir -p bin [ 102s] srcdir=''; \ [ 102s] test -f ./bin/autom4te.in || srcdir=./; \ [ 102s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.72/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.72/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.72|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|2023|g' -e 's|@VERSION[@]|2.72|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from bin/autom4te.in; do not edit by hand.|g' ${srcdir}bin/autom4te.in >bin/autom4te.tmp [ 102s] srcdir=''; \ [ 102s] test -f ./bin/autoreconf.in || srcdir=./; \ [ 102s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.72/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.72/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.72|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|2023|g' -e 's|@VERSION[@]|2.72|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from bin/autoreconf.in; do not edit by hand.|g' ${srcdir}bin/autoreconf.in >bin/autoreconf.tmp [ 102s] rm -f bin/autoscan bin/autoscan.tmp [ 102s] rm -f bin/autoupdate bin/autoupdate.tmp [ 102s] /bin/mkdir -p bin [ 102s] /bin/mkdir -p bin [ 102s] rm -f bin/ifnames bin/ifnames.tmp [ 102s] srcdir=''; \ [ 102s] test -f ./bin/autoscan.in || srcdir=./; \ [ 102s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.72/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.72/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.72|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|2023|g' -e 's|@VERSION[@]|2.72|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from bin/autoscan.in; do not edit by hand.|g' ${srcdir}bin/autoscan.in >bin/autoscan.tmp [ 102s] srcdir=''; \ [ 102s] test -f ./bin/autoupdate.in || srcdir=./; \ [ 102s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.72/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.72/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.72|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|2023|g' -e 's|@VERSION[@]|2.72|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from bin/autoupdate.in; do not edit by hand.|g' ${srcdir}bin/autoupdate.in >bin/autoupdate.tmp [ 102s] /bin/mkdir -p bin [ 102s] rm -f lib/autom4te.cfg lib/autom4te.cfg-t [ 102s] if test 'no' != no; then \ [ 102s] am__dir=. am__subdir_includes=''; \ [ 102s] case lib/emacs/autoconf-mode.elc in */*) \ [ 102s] am__dir=`echo 'lib/emacs/autoconf-mode.elc' | sed 's,/[^/]*$,,'`; \ [ 102s] am__subdir_includes="-L $am__dir -L ./$am__dir"; \ [ 102s] esac; \ [ 102s] test -d "$am__dir" || /bin/mkdir -p "$am__dir" || exit 1; \ [ 102s] no --batch \ [ 102s] \ [ 102s] $am__subdir_includes -L . -L . \ [ 102s] --eval '(if (boundp (quote byte-compile-dest-file-function)) (setq byte-compile-dest-file-function (lambda (_) "lib/emacs/autoconf-mode.elc")) (defun byte-compile-dest-file (_) "lib/emacs/autoconf-mode.elc") )' \ [ 102s] -f batch-byte-compile 'lib/emacs/autoconf-mode.el'; \ [ 102s] else :; fi [ 102s] srcdir=''; \ [ 102s] test -f ./bin/ifnames.in || srcdir=./; \ [ 102s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.72/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.72/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.72|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|2023|g' -e 's|@VERSION[@]|2.72|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from bin/ifnames.in; do not edit by hand.|g' ${srcdir}bin/ifnames.in >bin/ifnames.tmp [ 102s] /bin/mkdir -p lib [ 102s] chmod +x bin/autom4te.tmp [ 102s] chmod +x bin/autoconf.tmp [ 102s] chmod +x bin/autoheader.tmp [ 102s] chmod +x bin/autoreconf.tmp [ 102s] chmod +x bin/autoscan.tmp [ 102s] chmod +x bin/autoupdate.tmp [ 102s] chmod +x bin/ifnames.tmp [ 102s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/local/autoconf-2.72/bin|g' -e 's|@pkgdatadir[@]|/usr/local/autoconf-2.72/share/autoconf|g' -e 's|@prefix[@]|/usr/local/autoconf-2.72|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|2023|g' -e 's|@VERSION[@]|2.72|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from lib/autom4te.cfg.in; do not edit by hand.|g' ./lib/autom4te.in >lib/autom4te.cfg-t [ 102s] if test 'no' != no; then \ [ 102s] am__dir=. am__subdir_includes=''; \ [ 102s] case lib/emacs/autotest-mode.elc in */*) \ [ 102s] am__dir=`echo 'lib/emacs/autotest-mode.elc' | sed 's,/[^/]*$,,'`; \ [ 102s] am__subdir_includes="-L $am__dir -L ./$am__dir"; \ [ 102s] esac; \ [ 102s] test -d "$am__dir" || /bin/mkdir -p "$am__dir" || exit 1; \ [ 102s] no --batch \ [ 102s] \ [ 102s] $am__subdir_includes -L . -L . \ [ 102s] --eval '(if (boundp (quote byte-compile-dest-file-function)) (setq byte-compile-dest-file-function (lambda (_) "lib/emacs/autotest-mode.elc")) (defun byte-compile-dest-file (_) "lib/emacs/autotest-mode.elc") )' \ [ 102s] -f batch-byte-compile 'lib/emacs/autotest-mode.el'; \ [ 102s] else :; fi [ 102s] chmod a-w bin/autom4te.tmp [ 102s] chmod a-w bin/autoheader.tmp [ 102s] chmod a-w bin/autoreconf.tmp [ 102s] chmod a-w bin/autoconf.tmp [ 102s] chmod a-w bin/autoscan.tmp [ 102s] chmod a-w bin/autoupdate.tmp [ 102s] chmod a-w bin/ifnames.tmp [ 102s] chmod a-w lib/autom4te.cfg-t [ 102s] mv bin/autom4te.tmp bin/autom4te [ 102s] mv bin/autoheader.tmp bin/autoheader [ 102s] mv bin/autoreconf.tmp bin/autoreconf [ 102s] mv bin/autoconf.tmp bin/autoconf [ 102s] mv bin/autoscan.tmp bin/autoscan [ 102s] mv bin/ifnames.tmp bin/ifnames [ 102s] mv bin/autoupdate.tmp bin/autoupdate [ 102s] mv -f lib/autom4te.cfg-t lib/autom4te.cfg [ 102s] autom4te_perllibdir='.'/lib AUTOM4TE_CFG='lib/autom4te.cfg' bin/autom4te -B ''lib -B '.'/lib --language=M4sh ./tests/wrapper.as -o tests/wrapper.in [ 102s] /bin/mkdir -p lib/autoconf [ 102s] /bin/mkdir -p lib/autoscan [ 102s] /bin/mkdir -p lib/autotest [ 102s] lang=`echo 'lib/autoconf/autoconf' | sed 's,.*/,,'` \ [ 102s] && if test $lang = autoconf; then \ [ 102s] lang=autoconf-without-aclocal-m4; \ [ 102s] else :; fi \ [ 102s] && autom4te_perllibdir='.'/lib AUTOM4TE_CFG='lib/autom4te.cfg' bin/autom4te -B ''lib -B '.'/lib \ [ 102s] --language=$lang \ [ 102s] --freeze \ [ 102s] --output=lib/autoconf/autoconf.m4f [ 102s] echo '# Automatically Generated: do not edit this file' >lib/autoscan/autoscan.list [ 102s] lang=`echo 'lib/autotest/autotest' | sed 's,.*/,,'` \ [ 102s] && if test $lang = autoconf; then \ [ 102s] lang=autoconf-without-aclocal-m4; \ [ 102s] else :; fi \ [ 102s] && autom4te_perllibdir='.'/lib AUTOM4TE_CFG='lib/autom4te.cfg' bin/autom4te -B ''lib -B '.'/lib \ [ 102s] --language=$lang \ [ 102s] --freeze \ [ 102s] --output=lib/autotest/autotest.m4f [ 102s] /bin/mkdir -p lib/m4sugar [ 102s] /bin/mkdir -p lib/m4sugar [ 102s] lang=`echo 'lib/m4sugar/m4sugar' | sed 's,.*/,,'` \ [ 102s] && if test $lang = autoconf; then \ [ 102s] lang=autoconf-without-aclocal-m4; \ [ 102s] else :; fi \ [ 102s] && autom4te_perllibdir='.'/lib AUTOM4TE_CFG='lib/autom4te.cfg' bin/autom4te -B ''lib -B '.'/lib \ [ 102s] --language=$lang \ [ 102s] --freeze \ [ 102s] --output=lib/m4sugar/m4sugar.m4f [ 102s] lang=`echo 'lib/m4sugar/m4sh' | sed 's,.*/,,'` \ [ 102s] && if test $lang = autoconf; then \ [ 102s] lang=autoconf-without-aclocal-m4; \ [ 102s] else :; fi \ [ 102s] && autom4te_perllibdir='.'/lib AUTOM4TE_CFG='lib/autom4te.cfg' bin/autom4te -B ''lib -B '.'/lib \ [ 102s] --language=$lang \ [ 102s] --freeze \ [ 102s] --output=lib/m4sugar/m4sh.m4f [ 102s] sed '/^[#]/!q' ./lib/autoscan/autoscan.pre >>lib/autoscan/autoscan.list [ 102s] ( \ [ 102s] sed -n '/^[^#]/p' ./lib/autoscan/autoscan.pre; \ [ 102s] autom4te_perllibdir='.'/lib AUTOM4TE_CFG='lib/autom4te.cfg' bin/autom4te -B ''lib -B '.'/lib --cache '' -M -l autoconf-without-aclocal-m4 \ [ 102s] -t'AN_OUTPUT:$1: $2 $3' \ [ 102s] ) | LC_ALL=C sort >>lib/autoscan/autoscan.list [ 103s] rm -f tests/autoconf tests/autoconf.tmp [ 103s] rm -f tests/autoheader tests/autoheader.tmp [ 103s] input=tests/wrapper.in \ [ 103s] && sed -e 's|@wrap_program[@]|autoconf|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e "s|@configure_input[@]|Generated from $input.|g" tests/wrapper.in >tests/autoconf.tmp [ 103s] chmod +x tests/autoconf.tmp [ 103s] input=tests/wrapper.in \ [ 103s] && sed -e 's|@wrap_program[@]|autoheader|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e "s|@configure_input[@]|Generated from $input.|g" tests/wrapper.in >tests/autoheader.tmp [ 103s] rm -f tests/autom4te tests/autom4te.tmp [ 103s] rm -f tests/autoreconf tests/autoreconf.tmp [ 103s] rm -f tests/autoscan tests/autoscan.tmp [ 103s] rm -f tests/autoupdate tests/autoupdate.tmp [ 103s] input=tests/wrapper.in \ [ 103s] && sed -e 's|@wrap_program[@]|autoreconf|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e "s|@configure_input[@]|Generated from $input.|g" tests/wrapper.in >tests/autoreconf.tmp [ 103s] input=tests/wrapper.in \ [ 103s] && sed -e 's|@wrap_program[@]|autoscan|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e "s|@configure_input[@]|Generated from $input.|g" tests/wrapper.in >tests/autoscan.tmp [ 103s] input=tests/wrapper.in \ [ 103s] && sed -e 's|@wrap_program[@]|autoupdate|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e "s|@configure_input[@]|Generated from $input.|g" tests/wrapper.in >tests/autoupdate.tmp [ 103s] input=tests/wrapper.in \ [ 103s] && sed -e 's|@wrap_program[@]|autom4te|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e "s|@configure_input[@]|Generated from $input.|g" tests/wrapper.in >tests/autom4te.tmp [ 103s] rm -f tests/ifnames tests/ifnames.tmp [ 103s] chmod +x tests/autoupdate.tmp [ 103s] chmod +x tests/autoheader.tmp [ 103s] chmod +x tests/autom4te.tmp [ 103s] chmod +x tests/autoreconf.tmp [ 103s] chmod a-w tests/autoconf.tmp [ 103s] chmod +x tests/autoscan.tmp [ 103s] input=tests/wrapper.in \ [ 103s] && sed -e 's|@wrap_program[@]|ifnames|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72|g' -e "s|@configure_input[@]|Generated from $input.|g" tests/wrapper.in >tests/ifnames.tmp [ 103s] chmod +x tests/ifnames.tmp [ 103s] chmod a-w tests/autoreconf.tmp [ 103s] chmod a-w tests/autom4te.tmp [ 103s] chmod a-w tests/autoheader.tmp [ 103s] chmod a-w tests/autoupdate.tmp [ 103s] mv -f tests/autoconf.tmp tests/autoconf [ 103s] chmod a-w tests/autoscan.tmp [ 103s] chmod a-w tests/ifnames.tmp [ 103s] mv -f tests/autoreconf.tmp tests/autoreconf [ 103s] mv -f tests/autom4te.tmp tests/autom4te [ 103s] mv -f tests/autoscan.tmp tests/autoscan [ 103s] mv -f tests/autoheader.tmp tests/autoheader [ 103s] mv -f tests/autoupdate.tmp tests/autoupdate [ 103s] mv -f tests/ifnames.tmp tests/ifnames [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72' [ 103s] + exit 0 [ 103s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.F0eqsk [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd configure-dumper-1.1 [ 103s] + LANG=C [ 103s] + export LANG [ 103s] + unset DISPLAY [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm [ 103s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm [ 103s] + cd autoconf-2.64 [ 103s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm install [ 103s] /bin/make install-recursive [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64' [ 103s] Making install in bin [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/bin' [ 103s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/bin' [ 103s] test -z "/usr/local/autoconf-2.64/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/bin" [ 103s] /bin/install -c autom4te autoconf autoheader autoreconf ifnames autoscan autoupdate '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/bin' [ 103s] make[3]: Nothing to be done for 'install-data-am'. [ 103s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/bin' [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/bin' [ 103s] Making install in . [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64' [ 103s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64' [ 103s] make[3]: Nothing to be done for 'install-exec-am'. [ 103s] test -z "/usr/local/autoconf-2.64/share/autoconf" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf" [ 103s] /bin/install -c -m 644 ./INSTALL '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf' [ 103s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64' [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64' [ 103s] Making install in lib [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib' [ 104s] Making install in Autom4te [ 104s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/Autom4te' [ 104s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/Autom4te' [ 104s] make[4]: Nothing to be done for 'install-exec-am'. [ 104s] test -z "/usr/local/autoconf-2.64/share/autoconf/Autom4te" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/Autom4te" [ 104s] /bin/install -c -m 644 C4che.pm ChannelDefs.pm Channels.pm Configure_ac.pm FileUtils.pm General.pm Request.pm Struct.pm XFile.pm '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/Autom4te' [ 104s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/Autom4te' [ 104s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/Autom4te' [ 104s] Making install in m4sugar [ 104s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/m4sugar' [ 104s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/m4sugar' [ 104s] make[4]: Nothing to be done for 'install-exec-am'. [ 104s] test -z "/usr/local/autoconf-2.64/share/autoconf/m4sugar" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/m4sugar" [ 104s] /bin/install -c -m 644 m4sugar.m4 foreach.m4 m4sh.m4 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/m4sugar' [ 104s] test -z "/usr/local/autoconf-2.64/share/autoconf/m4sugar" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/m4sugar" [ 104s] /bin/install -c -m 644 version.m4 m4sugar.m4f m4sh.m4f '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/m4sugar' [ 104s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/m4sugar' [ 104s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/m4sugar' [ 104s] Making install in autoconf [ 104s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autoconf' [ 104s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autoconf' [ 104s] make[4]: Nothing to be done for 'install-exec-am'. [ 104s] test -z "/usr/local/autoconf-2.64/share/autoconf/autoconf" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/autoconf" [ 104s] /bin/install -c -m 644 autoconf.m4 general.m4 status.m4 oldnames.m4 specific.m4 autoheader.m4 autoupdate.m4 autotest.m4 autoscan.m4 lang.m4 c.m4 erlang.m4 fortran.m4 functions.m4 headers.m4 types.m4 libs.m4 programs.m4 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/autoconf' [ 104s] test -z "/usr/local/autoconf-2.64/share/autoconf/autoconf" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/autoconf" [ 104s] /bin/install -c -m 644 autoconf.m4f '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/autoconf' [ 104s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autoconf' [ 104s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autoconf' [ 104s] Making install in autotest [ 104s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autotest' [ 104s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autotest' [ 104s] make[4]: Nothing to be done for 'install-exec-am'. [ 104s] test -z "/usr/local/autoconf-2.64/share/autoconf/autotest" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/autotest" [ 104s] /bin/install -c -m 644 autotest.m4 general.m4 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/autotest' [ 104s] test -z "/usr/local/autoconf-2.64/share/autoconf/autotest" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/autotest" [ 104s] /bin/install -c -m 644 autotest.m4f '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/autotest' [ 104s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autotest' [ 104s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autotest' [ 104s] Making install in autoscan [ 104s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autoscan' [ 104s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autoscan' [ 104s] make[4]: Nothing to be done for 'install-exec-am'. [ 104s] test -z "/usr/local/autoconf-2.64/share/autoconf/autoscan" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/autoscan" [ 104s] /bin/install -c -m 644 autoscan.list '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf/autoscan' [ 104s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autoscan' [ 104s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/autoscan' [ 104s] Making install in emacs [ 104s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/emacs' [ 104s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/emacs' [ 104s] make[4]: Nothing to be done for 'install-exec-am'. [ 104s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/emacs' [ 104s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib/emacs' [ 104s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib' [ 104s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib' [ 104s] make[4]: Nothing to be done for 'install-exec-am'. [ 104s] test -z "/usr/local/autoconf-2.64/share/autoconf" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf" [ 104s] /bin/install -c -m 644 autom4te.cfg '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/autoconf' [ 104s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib' [ 104s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib' [ 104s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/lib' [ 104s] Making install in doc [ 104s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/doc' [ 104s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/doc' [ 104s] make[3]: Nothing to be done for 'install-exec-am'. [ 104s] test -z "/usr/local/autoconf-2.64/share/info" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/info" [ 104s] /bin/install -c -m 644 ./autoconf.info ./standards.info '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/info' [ 104s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/doc' [ 104s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/doc' [ 104s] Making install in tests [ 104s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/tests' [ 104s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/tests' [ 104s] make[3]: Nothing to be done for 'install-exec-am'. [ 104s] make[3]: Nothing to be done for 'install-data-am'. [ 104s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/tests' [ 104s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/tests' [ 104s] Making install in man [ 104s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/man' [ 105s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/man' [ 105s] make[3]: Nothing to be done for 'install-exec-am'. [ 105s] test -z "/usr/local/autoconf-2.64/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/man/man1" [ 105s] /bin/install -c -m 644 ./autoconf.1 ./autoheader.1 ./autom4te.1 ./autoreconf.1 ./autoscan.1 ./autoupdate.1 ./ifnames.1 ./config.guess.1 ./config.sub.1 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/man/man1' [ 105s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/man' [ 105s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64/man' [ 105s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.64' [ 105s] + rm -f /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/share/info/dir [ 105s] + find /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm -regex '.*\.la$' [ 105s] + xargs rm -f -- [ 105s] + xargs rm -f -- [ 105s] + find /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm -regex '.*\.a$' [ 105s] + cd ../autoconf-2.69 [ 105s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm install [ 105s] /bin/make install-recursive [ 105s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69' [ 105s] Making install in bin [ 105s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/bin' [ 105s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/bin' [ 105s] test -z "/usr/local/autoconf-2.69/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/bin" [ 105s] /bin/install -c autom4te autoconf autoheader autoreconf ifnames autoscan autoupdate '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/bin' [ 105s] make[3]: Nothing to be done for 'install-data-am'. [ 105s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/bin' [ 105s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/bin' [ 105s] Making install in . [ 105s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69' [ 105s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69' [ 105s] make[3]: Nothing to be done for 'install-exec-am'. [ 105s] test -z "/usr/local/autoconf-2.69/share/autoconf" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf" [ 105s] /bin/install -c -m 644 ./INSTALL '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf' [ 105s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69' [ 105s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69' [ 105s] Making install in lib [ 105s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib' [ 105s] Making install in Autom4te [ 106s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/Autom4te' [ 106s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/Autom4te' [ 106s] make[4]: Nothing to be done for 'install-exec-am'. [ 106s] test -z "/usr/local/autoconf-2.69/share/autoconf/Autom4te" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/Autom4te" [ 106s] /bin/install -c -m 644 C4che.pm ChannelDefs.pm Channels.pm Configure_ac.pm FileUtils.pm General.pm Getopt.pm Request.pm XFile.pm '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/Autom4te' [ 106s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/Autom4te' [ 106s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/Autom4te' [ 106s] Making install in m4sugar [ 106s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/m4sugar' [ 106s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/m4sugar' [ 106s] make[4]: Nothing to be done for 'install-exec-am'. [ 106s] test -z "/usr/local/autoconf-2.69/share/autoconf/m4sugar" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/m4sugar" [ 106s] /bin/install -c -m 644 m4sugar.m4 foreach.m4 m4sh.m4 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/m4sugar' [ 106s] test -z "/usr/local/autoconf-2.69/share/autoconf/m4sugar" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/m4sugar" [ 106s] /bin/install -c -m 644 version.m4 m4sugar.m4f m4sh.m4f '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/m4sugar' [ 106s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/m4sugar' [ 106s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/m4sugar' [ 106s] Making install in autoconf [ 106s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autoconf' [ 106s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autoconf' [ 106s] make[4]: Nothing to be done for 'install-exec-am'. [ 106s] test -z "/usr/local/autoconf-2.69/share/autoconf/autoconf" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/autoconf" [ 106s] /bin/install -c -m 644 autoconf.m4 general.m4 status.m4 oldnames.m4 specific.m4 autoheader.m4 autoupdate.m4 autotest.m4 autoscan.m4 lang.m4 c.m4 erlang.m4 fortran.m4 functions.m4 go.m4 headers.m4 types.m4 libs.m4 programs.m4 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/autoconf' [ 106s] test -z "/usr/local/autoconf-2.69/share/autoconf/autoconf" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/autoconf" [ 106s] /bin/install -c -m 644 autoconf.m4f '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/autoconf' [ 106s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autoconf' [ 106s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autoconf' [ 106s] Making install in autotest [ 106s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autotest' [ 106s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autotest' [ 106s] make[4]: Nothing to be done for 'install-exec-am'. [ 106s] test -z "/usr/local/autoconf-2.69/share/autoconf/autotest" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/autotest" [ 106s] /bin/install -c -m 644 autotest.m4 general.m4 specific.m4 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/autotest' [ 106s] test -z "/usr/local/autoconf-2.69/share/autoconf/autotest" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/autotest" [ 106s] /bin/install -c -m 644 autotest.m4f '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/autotest' [ 107s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autotest' [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autotest' [ 107s] Making install in autoscan [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autoscan' [ 107s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autoscan' [ 107s] make[4]: Nothing to be done for 'install-exec-am'. [ 107s] test -z "/usr/local/autoconf-2.69/share/autoconf/autoscan" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/autoscan" [ 107s] /bin/install -c -m 644 autoscan.list '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf/autoscan' [ 107s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autoscan' [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/autoscan' [ 107s] Making install in emacs [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/emacs' [ 107s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/emacs' [ 107s] make[4]: Nothing to be done for 'install-exec-am'. [ 107s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/emacs' [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib/emacs' [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib' [ 107s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib' [ 107s] make[4]: Nothing to be done for 'install-exec-am'. [ 107s] test -z "/usr/local/autoconf-2.69/share/autoconf" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf" [ 107s] /bin/install -c -m 644 autom4te.cfg '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/autoconf' [ 107s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib' [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/lib' [ 107s] Making install in doc [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/doc' [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/doc' [ 107s] make[3]: Nothing to be done for 'install-exec-am'. [ 107s] test -z "/usr/local/autoconf-2.69/share/info" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/info" [ 107s] /bin/install -c -m 644 ./autoconf.info ./standards.info '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/info' [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/doc' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/doc' [ 107s] Making install in tests [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/tests' [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/tests' [ 107s] make[3]: Nothing to be done for 'install-exec-am'. [ 107s] make[3]: Nothing to be done for 'install-data-am'. [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/tests' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/tests' [ 107s] Making install in man [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/man' [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/man' [ 107s] make[3]: Nothing to be done for 'install-exec-am'. [ 107s] test -z "/usr/local/autoconf-2.69/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/man/man1" [ 107s] /bin/install -c -m 644 ./autoconf.1 ./autoheader.1 ./autom4te.1 ./autoreconf.1 ./autoscan.1 ./autoupdate.1 ./ifnames.1 ./config.guess.1 ./config.sub.1 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/man/man1' [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/man' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69/man' [ 107s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.69' [ 107s] + rm -f /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/share/info/dir [ 107s] + find /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm -regex '.*\.la$' [ 107s] + xargs rm -f -- [ 107s] + find /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm -regex '.*\.a$' [ 107s] + xargs rm -f -- [ 107s] + cd ../autoconf-2.72 [ 107s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm install [ 107s] /bin/make install-am [ 107s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72' [ 107s] if test 'no' != no; then \ [ 107s] am__dir=. am__subdir_includes=''; \ [ 107s] case lib/emacs/autoconf-mode.elc in */*) \ [ 107s] am__dir=`echo 'lib/emacs/autoconf-mode.elc' | sed 's,/[^/]*$,,'`; \ [ 107s] am__subdir_includes="-L $am__dir -L ./$am__dir"; \ [ 107s] esac; \ [ 107s] test -d "$am__dir" || /bin/mkdir -p "$am__dir" || exit 1; \ [ 107s] no --batch \ [ 107s] \ [ 107s] $am__subdir_includes -L . -L . \ [ 107s] --eval '(if (boundp (quote byte-compile-dest-file-function)) (setq byte-compile-dest-file-function (lambda (_) "lib/emacs/autoconf-mode.elc")) (defun byte-compile-dest-file (_) "lib/emacs/autoconf-mode.elc") )' \ [ 107s] -f batch-byte-compile 'lib/emacs/autoconf-mode.el'; \ [ 107s] else :; fi [ 108s] if test 'no' != no; then \ [ 108s] am__dir=. am__subdir_includes=''; \ [ 108s] case lib/emacs/autotest-mode.elc in */*) \ [ 108s] am__dir=`echo 'lib/emacs/autotest-mode.elc' | sed 's,/[^/]*$,,'`; \ [ 108s] am__subdir_includes="-L $am__dir -L ./$am__dir"; \ [ 108s] esac; \ [ 108s] test -d "$am__dir" || /bin/mkdir -p "$am__dir" || exit 1; \ [ 108s] no --batch \ [ 108s] \ [ 108s] $am__subdir_includes -L . -L . \ [ 108s] --eval '(if (boundp (quote byte-compile-dest-file-function)) (setq byte-compile-dest-file-function (lambda (_) "lib/emacs/autotest-mode.elc")) (defun byte-compile-dest-file (_) "lib/emacs/autotest-mode.elc") )' \ [ 108s] -f batch-byte-compile 'lib/emacs/autotest-mode.el'; \ [ 108s] else :; fi [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/bin' [ 108s] /bin/install -c bin/autoconf bin/autoheader bin/autom4te bin/autoreconf bin/autoscan bin/autoupdate bin/ifnames '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/bin' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/autoconf' [ 108s] /bin/install -c -m 644 lib/autoconf/autoconf.m4 lib/autoconf/general.m4 lib/autoconf/status.m4 lib/autoconf/oldnames.m4 lib/autoconf/specific.m4 lib/autoconf/autoheader.m4 lib/autoconf/autoupdate.m4 lib/autoconf/autotest.m4 lib/autoconf/autoscan.m4 lib/autoconf/lang.m4 lib/autoconf/c.m4 lib/autoconf/erlang.m4 lib/autoconf/fortran.m4 lib/autoconf/functions.m4 lib/autoconf/go.m4 lib/autoconf/headers.m4 lib/autoconf/types.m4 lib/autoconf/libs.m4 lib/autoconf/programs.m4 lib/autoconf/trailer.m4 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/autoconf' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/autotest' [ 108s] /bin/install -c -m 644 lib/autotest/autotest.m4 lib/autotest/general.m4 lib/autotest/specific.m4 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/autotest' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/build-aux' [ 108s] /bin/install -c -m 644 build-aux/config.guess build-aux/config.sub build-aux/install-sh '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/build-aux' [ 108s] if test 'no' != no; then \ [ 108s] am__dir=. am__subdir_includes=''; \ [ 108s] case lib/emacs/autoconf-mode.elc in */*) \ [ 108s] am__dir=`echo 'lib/emacs/autoconf-mode.elc' | sed 's,/[^/]*$,,'`; \ [ 108s] am__subdir_includes="-L $am__dir -L ./$am__dir"; \ [ 108s] esac; \ [ 108s] test -d "$am__dir" || /bin/mkdir -p "$am__dir" || exit 1; \ [ 108s] no --batch \ [ 108s] \ [ 108s] $am__subdir_includes -L . -L . \ [ 108s] --eval '(if (boundp (quote byte-compile-dest-file-function)) (setq byte-compile-dest-file-function (lambda (_) "lib/emacs/autoconf-mode.elc")) (defun byte-compile-dest-file (_) "lib/emacs/autoconf-mode.elc") )' \ [ 108s] -f batch-byte-compile 'lib/emacs/autoconf-mode.el'; \ [ 108s] else :; fi [ 108s] if test 'no' != no; then \ [ 108s] am__dir=. am__subdir_includes=''; \ [ 108s] case lib/emacs/autotest-mode.elc in */*) \ [ 108s] am__dir=`echo 'lib/emacs/autotest-mode.elc' | sed 's,/[^/]*$,,'`; \ [ 108s] am__subdir_includes="-L $am__dir -L ./$am__dir"; \ [ 108s] esac; \ [ 108s] test -d "$am__dir" || /bin/mkdir -p "$am__dir" || exit 1; \ [ 108s] no --batch \ [ 108s] \ [ 108s] $am__subdir_includes -L . -L . \ [ 108s] --eval '(if (boundp (quote byte-compile-dest-file-function)) (setq byte-compile-dest-file-function (lambda (_) "lib/emacs/autotest-mode.elc")) (defun byte-compile-dest-file (_) "lib/emacs/autotest-mode.elc") )' \ [ 108s] -f batch-byte-compile 'lib/emacs/autotest-mode.el'; \ [ 108s] else :; fi [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/m4sugar' [ 108s] /bin/install -c -m 644 lib/m4sugar/m4sugar.m4 lib/m4sugar/foreach.m4 lib/m4sugar/m4sh.m4 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/m4sugar' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/Autom4te' [ 108s] /bin/install -c -m 644 lib/Autom4te/C4che.pm lib/Autom4te/ChannelDefs.pm lib/Autom4te/Channels.pm lib/Autom4te/Config.pm lib/Autom4te/Configure_ac.pm lib/Autom4te/FileUtils.pm lib/Autom4te/General.pm lib/Autom4te/Getopt.pm lib/Autom4te/Request.pm lib/Autom4te/XFile.pm '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/Autom4te' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/info' [ 108s] /bin/install -c -m 644 ./doc/autoconf.info ./doc/standards.info '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/info' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/man/man1' [ 109s] /bin/install -c -m 644 man/autoconf.1 man/autoheader.1 man/autom4te.1 man/autoreconf.1 man/autoscan.1 man/autoupdate.1 man/ifnames.1 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/man/man1' [ 109s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/autoconf' [ 109s] /bin/install -c -m 644 lib/autoconf/autoconf.m4f '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/autoconf' [ 109s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/autoscan' [ 109s] /bin/install -c -m 644 lib/autoscan/autoscan.list '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/autoscan' [ 109s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/autotest' [ 109s] /bin/install -c -m 644 lib/autotest/autotest.m4f '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/autotest' [ 109s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/m4sugar' [ 109s] /bin/install -c -m 644 lib/m4sugar/m4sugar.m4f lib/m4sugar/m4sh.m4f '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/m4sugar' [ 109s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf' [ 109s] /bin/install -c -m 644 lib/autom4te.cfg lib/version.m4 '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf' [ 109s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf' [ 109s] /bin/install -c -m 644 ./INSTALL '/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf' [ 109s] /bin/make install-data-hook [ 109s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72' [ 109s] for s in build-aux/config.guess build-aux/config.sub build-aux/install-sh; do \ [ 109s] chmod +x "/home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/autoconf/$s"; \ [ 109s] done [ 109s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72' [ 109s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72' [ 109s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/configure-dumper-1.1/autoconf-2.72' [ 109s] + rm -f /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/share/info/dir [ 109s] + xargs rm -f -- [ 109s] + find /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm -regex '.*\.la$' [ 109s] + find /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm -regex '.*\.a$' [ 109s] + xargs rm -f -- [ 109s] + cd .. [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/man /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.64/share/info [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/man /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.69/share/info [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/man /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/local/autoconf-2.72/share/info [ 109s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/usr/bin [ 109s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/etc/configure-dumper/modules [ 109s] + install -m 0755 patch_configure.pl /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm//usr/bin [ 109s] + install -m 0755 dump_configure.pl /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm//usr/bin [ 109s] + install -m 0755 dump_differ.pl /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm//usr/bin [ 109s] + install -m 0755 modules/CLOOGRules.pm modules/DumperCommon.pm modules/GCCRules.pm modules/GMPRules.pm modules/ISLRules.pm modules/MPCRules.pm modules/MPFRRules.pm modules/SpecialRules.pm /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm/etc/configure-dumper/modules [ 109s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.1-2.1 --unique-debug-src-base configure-dumper-1.1-2.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/configure-dumper-1.1 [ 111s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/configure-dumper-1.1/configure-dumper-debuginfo.manifest [ 111s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/configure-dumper-1.1/configure-dumper-debugsource.manifest [ 111s] + /usr/lib/rpm/check-buildroot [ 111s] + /usr/lib/rpm//brp-compress [ 111s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 112s] + /usr/lib/rpm/brp-python-hardlink [ 112s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm [ 112s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/configure-dumper-1.1/isu.list [ 112s] ~/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm ~/rpmbuild/BUILD/configure-dumper-1.1 [ 112s] ~/rpmbuild/BUILD/configure-dumper-1.1 [ 112s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 113s] Processing files: configure-dumper-1.1-2.1.noarch [ 113s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 113s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 113s] [ 118s] Provides: configure-dumper = 1.1-2.1 perl(Autom4te::C4che) perl(Autom4te::ChannelDefs) perl(Autom4te::Channels) perl(Autom4te::Config) perl(Autom4te::Configure_ac) perl(Autom4te::FileUtils) perl(Autom4te::General) perl(Autom4te::Getopt) perl(Autom4te::Request) perl(Autom4te::Struct) = 0.58 perl(Autom4te::Struct::Tie_ISA) perl(Autom4te::XFile) = 1.2 perl(CLOOGRules) perl(DumperCommon) perl(GCCRules) perl(GMPRules) perl(ISLRules) perl(MPCRules) perl(MPFRRules) perl(SpecialRules) [ 118s] Requires(interp): /bin/sh [ 118s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 118s] Requires(postun): /bin/sh [ 118s] Requires: /bin/perl /bin/sh /usr/bin/perl [ 118s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm [ 119s] Wrote: /home/abuild/rpmbuild/SRPMS/configure-dumper-1.1-2.1.src.rpm [ 121s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/configure-dumper-1.1-2.1.noarch.rpm [ 121s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.BbBzqc [ 121s] + umask 022 [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + cd configure-dumper-1.1 [ 121s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/configure-dumper-1.1-2.1.arm [ 121s] + exit 0 [ 121s] ... checking for files with abuild user/group [ 121s] ... creating baselibs [ 122s] ... comparing built packages with the former built [ 123s] /usr/lib/build/pkg-diff.sh [ 123s] compare /.build.oldpackages/configure-dumper-1.1-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/configure-dumper-1.1-2.1.src.rpm [ 123s] This is not a prerelease project. Compare the project name. [ 123s] comparing disturl_distribution [ 123s] --- old-disturl_distribution [ 123s] +++ new-disturl_distribution [ 123s] @@ -1 +1 @@ [ 123s] -obs://127.0.0.1/Tizen-Base/standard/998631150d0b72e862db88c4e5c32f63-configure-dumper Tizen-Base [ 123s] +obs://127.0.0.1/Tizen-Base/standard/8b72f7f7f31f11a165661df438555159-configure-dumper Tizen-Base [ 123s] RPM meta information is different [ 123s] [ 123s] 58ddb04e8dc7 finished "build configure-dumper.spec" at Fri Dec 27 08:16:01 UTC 2024. [ 123s] Retried build at Tue Dec 31 03:24:38 2024 returned same result, skipped Retried build at Tue Jan 7 04:15:32 2025 returned same result, skipped Retried build at Thu Jan 9 12:25:40 2025 returned same result, skipped Retried build at Fri Jan 10 02:35:11 2025 returned same result, skipped Retried build at Tue Jan 14 04:56:38 2025 returned same result, skipped Retried build at Fri Jan 17 14:36:45 2025 returned same result, skipped Retried build at Thu Jan 23 22:47:00 2025 returned same result, skipped Retried build at Thu Jan 30 22:53:12 2025 returned same result, skipped Retried build at Thu Feb 20 05:49:52 2025 returned same result, skipped Retried build at Fri Feb 21 04:17:08 2025 returned same result, skipped Retried build at Wed Feb 26 13:42:50 2025 returned same result, skipped Retried build at Mon Mar 3 03:15:27 2025 returned same result, skipped Retried build at Thu Mar 6 06:05:56 2025 returned same result, skipped Retried build at Mon Mar 10 00:41:53 2025 returned same result, skipped Retried build at Tue Mar 11 01:05:37 2025 returned same result, skipped Retried build at Wed Mar 12 23:55:20 2025 returned same result, skipped Retried build at Mon Mar 17 13:48:23 2025 returned same result, skipped Retried build at Fri Mar 21 00:00:38 2025 returned same result, skipped Retried build at Thu Apr 3 23:44:11 2025 returned same result, skipped Retried build at Mon Apr 7 11:55:25 2025 returned same result, skipped Retried build at Mon Apr 28 06:38:32 2025 returned same result, skipped Retried build at Tue Apr 29 23:33:32 2025 returned same result, skipped Retried build at Thu May 15 00:58:18 2025 returned same result, skipped Retried build at Fri May 23 13:00:43 2025 returned same result, skipped Retried build at Wed Jun 11 04:59:28 2025 returned same result, skipped Retried build at Tue Jun 17 10:21:25 2025 returned same result, skipped Retried build at Thu Jun 19 06:54:30 2025 returned same result, skipped Retried build at Fri Jul 4 01:05:54 2025 returned same result, skipped Retried build at Wed Jul 9 02:39:39 2025 returned same result, skipped Retried build at Mon Jul 14 02:23:05 2025 returned same result, skipped Retried build at Tue Jul 15 14:33:00 2025 returned same result, skipped Retried build at Mon Jul 21 01:21:39 2025 returned same result, skipped Retried build at Tue Jul 29 04:00:45 2025 returned same result, skipped Retried build at Wed Jul 30 00:07:45 2025 returned same result, skipped Retried build at Mon Sep 1 07:27:19 2025 returned same result, skipped Retried build at Tue Sep 2 07:51:51 2025 returned same result, skipped Retried build at Wed Sep 10 04:10:39 2025 returned same result, skipped