[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] db4add51c2d9 started "build python3-libxml2.spec" at Fri Dec 26 06:33:25 UTC 2025. [ 0s] [ 0s] Building python3-libxml2 for project 'Tizen-Base' repository 'standard' arch 'aarch64' srcmd5 '970d2d0bbdce2b433057d5956cb9196e' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8/.build-srcdir/python3-libxml2.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8/.build-srcdir/python3-libxml2.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/8/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8/.build-srcdir/python3-libxml2.spec build ... [ 2s] registering binfmt handlers for cross build [ 5s] cycle: nss -> libsoftokn3 [ 5s] breaking dependency nss -> libsoftokn3 [ 5s] [1/43] preinstalling libmagic-data... [ 5s] [2/43] preinstalling libncurses... [ 5s] [3/43] preinstalling setup... [ 6s] [4/43] preinstalling filesystem... [ 6s] [5/43] preinstalling glibc... [ 7s] [6/43] preinstalling bash... [ 7s] [7/43] preinstalling diffutils... [ 7s] [8/43] preinstalling grep... [ 7s] [9/43] preinstalling libattr... [ 7s] [10/43] preinstalling libblkid... [ 8s] [11/43] preinstalling libbz2... [ 8s] [12/43] preinstalling libcap... [ 8s] [13/43] preinstalling libfreebl3... [ 8s] [14/43] preinstalling libgcc... [ 9s] [15/43] preinstalling liblua... [ 9s] [16/43] preinstalling liblzma... [ 9s] [17/43] preinstalling libopenssl3... [ 10s] [18/43] preinstalling libpopt... [ 10s] [19/43] preinstalling libreadline... [ 10s] [20/43] preinstalling libsmack... [ 10s] [21/43] preinstalling libsqlite... [ 11s] [22/43] preinstalling libuuid... [ 11s] [23/43] preinstalling libxcrypt... [ 11s] [24/43] preinstalling libxml2... [ 11s] [25/43] preinstalling libzstd1... [ 11s] [26/43] preinstalling nspr... [ 12s] [27/43] preinstalling sed... [ 12s] [28/43] preinstalling zlib... [ 12s] [29/43] preinstalling qemu-accel-x86_64-aarch64... [ 37s] [30/43] preinstalling qemu-linux-user-x86_64-cross... [ 43s] [31/43] preinstalling coreutils... [ 43s] [32/43] preinstalling libacl... [ 43s] [33/43] preinstalling libelf... [ 43s] [34/43] preinstalling libmount... [ 43s] [35/43] preinstalling smack... [ 43s] [36/43] preinstalling bzip2... [ 44s] [37/43] preinstalling libmagic... [ 44s] [38/43] preinstalling tar... [ 44s] [39/43] preinstalling util-linux... [ 44s] [40/43] preinstalling rpm... [ 45s] [41/43] preinstalling util-linux-su... [ 45s] [42/43] preinstalling nss... [ 46s] [43/43] preinstalling libsoftokn3... [ 47s] running qemu-linux-user-x86_64-cross postinstall script [ 48s] running qemu-accel-x86_64-aarch64 postinstall script [ 48s] mv: cannot stat `/usr/lib64/gcc/aarch64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 48s] running setup postinstall script [ 48s] chroot: failed to run command '': No such file or directory [ 48s] initializing rpm db... [ 49s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 49s] breaking dependency libxcrypt-devel -> glibc-devel [ 49s] cycle: libsoftokn3 -> nss [ 49s] breaking dependency nss -> libsoftokn3 [ 49s] done [ 49s] querying package ids... [ 50s] [1/111] cumulate libmagic-data-5.46-1.13 [ 50s] [2/111] cumulate setup-0.9-1.10 [ 50s] [3/111] cumulate filesystem-3.1-1.1 [ 50s] [4/111] cumulate glibc-2.40-2.16 [ 50s] [5/111] cumulate bash-3.2.57-1.1 [ 50s] [6/111] cumulate cpio-2.8-1.1 [ 50s] [7/111] cumulate diffutils-3.10-1.2 [ 50s] [8/111] cumulate findutils-4.3.8-1.17 [ 50s] [9/111] cumulate gdbm-1.8.3-1.26 [ 50s] [10/111] cumulate hostname-3.23-1.1 [ 50s] [11/111] cumulate libatomic-14.2.0-2.7 [ 50s] [12/111] cumulate libattr-2.5.1-1.17 [ 50s] [13/111] cumulate libblkid-2.41.2-1.4 [ 50s] [14/111] cumulate libbz2-1.0.8-1.23 [ 50s] [15/111] cumulate libcap-2.73-1.21 [ 50s] [16/111] cumulate libexpat-2.7.3-1.17 [ 50s] [17/111] cumulate libffi-3.4.7-1.23 [ 50s] [18/111] cumulate libfreebl3-3.109-1.19 [ 50s] [19/111] cumulate libgcc-14.2.0-2.7 [ 50s] [20/111] cumulate libgomp-14.2.0-2.7 [ 50s] [21/111] cumulate libitm-14.2.0-2.7 [ 50s] [22/111] cumulate libltdl-2.5.4-1.11 [ 50s] [23/111] cumulate liblua-5.1.5-1.16 [ 50s] [24/111] cumulate liblzma-5.8.1-1.2 [ 50s] [25/111] cumulate libopenssl3-3.0.18-1.19 [ 50s] [26/111] cumulate libpcre-8.45-1.17 [ 50s] [27/111] cumulate libpopt-1.16-1.16 [ 50s] [28/111] cumulate libpython3_131_0-3.13.1-1.26 [ 50s] [29/111] cumulate libsmack-1.3.1-1.16 [ 50s] [30/111] cumulate libsmartcols-2.41.2-1.4 [ 50s] [31/111] cumulate libsqlite-3.51.0-1.6 [ 50s] [32/111] cumulate libuuid-2.41.2-1.4 [ 50s] [33/111] cumulate libxcrypt-4.4.36-1.24 [ 50s] [34/111] cumulate libxml2-2.13.5-1.24 [ 50s] [35/111] cumulate libzstd1-1.5.7-1.3 [ 50s] [36/111] cumulate m4-1.4.20-1.1 [ 50s] [37/111] cumulate net-tools-2.0_20121208git-1.17 [ 50s] [38/111] cumulate nspr-4.36-1.14 [ 50s] [39/111] cumulate patch-2.8-1.2 [ 50s] [40/111] cumulate pkg-config-0.29.2-1.23 [ 50s] [41/111] cumulate sed-4.1c-1.16 [ 50s] [42/111] cumulate update-alternatives-1.22.2-1.1 [ 50s] [43/111] cumulate which-2.17-1.1 [ 50s] [44/111] cumulate zlib-1.3.1-1.23 [ 50s] [45/111] cumulate build-compare-2023.06.18-1.11 [ 50s] [46/111] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 50s] [47/111] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-2.11 [ 50s] [48/111] cumulate binutils-libs-2.43-1.24 [ 50s] [49/111] cumulate coreutils-6.9-14.9 [ 50s] [50/111] cumulate cpp-14.2.0-2.7 [ 50s] [51/111] cumulate gawk-3.1.5-1.1 [ 50s] [52/111] cumulate gcc-c++-14.2.0-2.7 [ 50s] [53/111] cumulate grep-2.5.2-1.14 [ 50s] [54/111] cumulate libacl-2.3.2-1.16 [ 50s] [55/111] cumulate libelf-0.189-1.25 [ 50s] [56/111] cumulate libgfortran-14.2.0-2.7 [ 50s] [57/111] cumulate liblastlog2-2.41.2-1.4 [ 50s] [58/111] cumulate libmount-2.41.2-1.4 [ 50s] [59/111] cumulate libstdc++-14.2.0-2.7 [ 50s] [60/111] cumulate make-4.4.1-1.15 [ 50s] [61/111] cumulate nss-certs-3.109-1.19 [ 50s] [62/111] cumulate smack-1.3.1-1.16 [ 50s] [63/111] cumulate xz-devel-5.8.1-1.2 [ 50s] [64/111] cumulate bzip2-1.0.8-1.23 [ 50s] [65/111] cumulate libfdisk-2.41.2-1.4 [ 50s] [66/111] cumulate libmagic-5.46-1.13 [ 50s] [67/111] cumulate xz-5.8.1-1.2 [ 50s] [68/111] cumulate perl-5.38.0-1.23 [ 50s] [69/111] cumulate build-mkbaselibs-20120927-1.1 [ 50s] [70/111] cumulate libstdc++-devel-14.2.0-2.7 [ 50s] [71/111] cumulate linux-glibc-devel-6.6-1.26 [ 50s] [72/111] cumulate file-5.46-1.13 [ 50s] [73/111] cumulate tar-1.17-1.1 [ 50s] [74/111] cumulate terminfo-base-full-6.4-1.26 [ 50s] [75/111] cumulate autoconf-2.71-1.26 [ 50s] [76/111] cumulate glibc-locale-2.40-2.16 [ 50s] [77/111] cumulate gzip-1.3.12-1.16 [ 50s] [78/111] cumulate libcc1-14.2.0-2.7 [ 50s] [79/111] cumulate binutils-2.43-1.24 [ 50s] [80/111] cumulate pam-1.1.6-1.20 [ 50s] [81/111] cumulate tzdata-2025b-1.1 [ 50s] [82/111] cumulate libdw-0.189-1.25 [ 50s] [83/111] cumulate libarchive-3.8.1-1.24 [ 50s] [84/111] cumulate automake-1.16.5-1.24 [ 50s] [85/111] cumulate libasm-0.189-1.25 [ 50s] [86/111] cumulate libncurses5-6.4-1.26 [ 50s] [87/111] cumulate libncurses6-6.4-1.26 [ 50s] [88/111] cumulate build-20120927-1.1 [ 50s] [89/111] cumulate gcc-14.2.0-2.7 [ 50s] [90/111] cumulate rpm-4.14.1.1-2.11 [ 50s] [91/111] cumulate libncurses-6.4-1.26 [ 50s] [92/111] cumulate less-685-1.1 [ 50s] [93/111] cumulate libreadline-5.2-1.24 [ 50s] [94/111] cumulate qemu-accel-x86_64-aarch64-0.4-1.12 [ 50s] [95/111] cumulate libtool-2.5.4-1.11 [ 50s] [96/111] cumulate ncurses-devel-6.4-1.26 [ 50s] [97/111] cumulate elfutils-0.189-1.25 [ 50s] [98/111] cumulate readline-devel-5.2-1.24 [ 50s] [99/111] cumulate libxml2-tools-2.13.5-1.24 [ 50s] [100/111] cumulate python3-base-3.13.1-1.26 [ 50s] [101/111] cumulate util-linux-2.41.2-1.4 [ 50s] [102/111] cumulate python3-3.13.1-1.1 [ 50s] [103/111] cumulate util-linux-su-2.41.2-1.4 [ 50s] [104/111] cumulate python3-devel-3.13.1-1.26 [ 50s] [105/111] cumulate libxcrypt-devel-4.4.36-1.24 [ 50s] [106/111] cumulate nss-3.109-1.19 [ 50s] [107/111] cumulate glibc-devel-2.40-2.16 [ 50s] [108/111] cumulate libsoftokn3-3.109-1.19 [ 50s] [109/111] cumulate zlib-devel-1.3.1-1.23 [ 50s] [110/111] cumulate rpm-build-4.14.1.1-2.11 [ 50s] [111/111] cumulate libxml2-devel-2.13.5-1.24 [ 50s] now installing cumulated packages [ 52s] Preparing... ######################################## [ 52s] Updating / installing... [ 52s] setup-0.9-1.10 ######################################## [ 52s] filesystem-3.1-1.1 ######################################## [ 53s] glibc-2.40-2.16 ######################################## [ 53s] bash-3.2.57-1.1 ######################################## [ 53s] zlib-1.3.1-1.23 ######################################## [ 54s] coreutils-6.9-14.9 ######################################## [ 54s] libbz2-1.0.8-1.23 ######################################## [ 54s] libgcc-14.2.0-2.7 ######################################## [ 55s] libstdc++-14.2.0-2.7 ######################################## [ 55s] liblzma-5.8.1-1.2 ######################################## [ 55s] pkg-config-0.29.2-1.23 ######################################## [ 55s] libelf-0.189-1.25 ######################################## [ 56s] libdw-0.189-1.25 ######################################## [ 56s] libopenssl3-3.0.18-1.19 ######################################## [ 57s] libxcrypt-4.4.36-1.24 ######################################## [ 57s] libblkid-2.41.2-1.4 ######################################## [ 57s] libsqlite-3.51.0-1.6 ######################################## [ 58s] libxml2-2.13.5-1.24 ######################################## [ 58s] nspr-4.36-1.14 ######################################## [ 59s] pam-1.1.6-1.20 ######################################## [ 59s] terminfo-base-full-6.4-1.26 ######################################## [ 60s] libncurses6-6.4-1.26 ######################################## [ 60s] libreadline-5.2-1.24 ######################################## [ 60s] gdbm-1.8.3-1.26 ######################################## [ 65s] perl-5.38.0-1.23 ######################################## [ 65s] libcap-2.73-1.21 ######################################## [ 65s] libfreebl3-3.109-1.19 ######################################## [ 66s] liblua-5.1.5-1.16 ######################################## [ 66s] libpopt-1.16-1.16 ######################################## [ 67s] libpython3_131_0-3.13.1-1.26 ######################################## [ 67s] libuuid-2.41.2-1.4 ######################################## [ 67s] libzstd1-1.5.7-1.3 ######################################## [ 68s] libfdisk-2.41.2-1.4 ######################################## [ 68s] build-mkbaselibs-20120927-1.1 ######################################## [ 68s] libxml2-tools-2.13.5-1.24 ######################################## [ 68s] libncurses5-6.4-1.26 ######################################## [ 69s] ncurses-devel-6.4-1.26 ######################################## [ 69s] readline-devel-5.2-1.24 ######################################## [ 69s] nss-certs-3.109-1.19 ######################################## [ 69s] libsoftokn3-3.109-1.19 ######################################## [ 70s] nss-3.109-1.19 ######################################## [ 70s] liblastlog2-2.41.2-1.4 ######################################## [ 70s] libmount-2.41.2-1.4 ######################################## [ 71s] libasm-0.189-1.25 ######################################## [ 71s] xz-devel-5.8.1-1.2 ######################################## [ 71s] xz-5.8.1-1.2 ######################################## [ 71s] libcc1-14.2.0-2.7 ######################################## [ 72s] libgfortran-14.2.0-2.7 ######################################## [ 72s] bzip2-1.0.8-1.23 ######################################## [ 72s] linux-glibc-devel-6.6-1.26 ######################################## [ 72s] libxcrypt-devel-4.4.36-1.24 ######################################## [ 73s] glibc-devel-2.40-2.16 ######################################## [ 73s] zlib-devel-1.3.1-1.23 ######################################## [ 73s] gzip-1.3.12-1.16 ######################################## [ 73s] binutils-libs-2.43-1.24 ######################################## [ 74s] binutils-2.43-1.24 ######################################## [ 74s] make-4.4.1-1.15 ######################################## [ 74s] findutils-4.3.8-1.17 ######################################## [ 74s] libatomic-14.2.0-2.7 ######################################## [ 74s] libattr-2.5.1-1.17 ######################################## [ 75s] libacl-2.3.2-1.16 ######################################## [ 75s] tar-1.17-1.1 ######################################## [ 75s] libarchive-3.8.1-1.24 ######################################## [ 76s] libexpat-2.7.3-1.17 ######################################## [ 76s] libffi-3.4.7-1.23 ######################################## [ 79s] python3-base-3.13.1-1.26 ######################################## [ 79s] libgomp-14.2.0-2.7 ######################################## [ 79s] libitm-14.2.0-2.7 ######################################## [ 86s] gcc-14.2.0-2.7 ######################################## [ 86s] libltdl-2.5.4-1.11 ######################################## [ 87s] libpcre-8.45-1.17 ######################################## [ 87s] libsmack-1.3.1-1.16 ######################################## [ 88s] libsmartcols-2.41.2-1.4 ######################################## [ 88s] m4-1.4.20-1.1 ######################################## [ 88s] autoconf-2.71-1.26 ######################################## [ 89s] automake-1.16.5-1.24 ######################################## [ 89s] patch-2.8-1.2 ######################################## [ 89s] sed-4.1c-1.16 ######################################## [ 90s] util-linux-2.41.2-1.4 ######################################## [ 90s] libmagic-data-5.46-1.13 ######################################## [ 90s] libmagic-5.46-1.13 ######################################## [ 91s] rpm-4.14.1.1-2.11 ######################################## [ 92s] rpm-build-4.14.1.1-2.11 ######################################## [ 92s] file-5.46-1.13 ######################################## [ 92s] util-linux-su-2.41.2-1.4 ######################################## [ 92s] libtool-2.5.4-1.11 ######################################## [ 92s] smack-1.3.1-1.16 ######################################## [ 92s] grep-2.5.2-1.14 ######################################## [ 110s] qemu-accel-x86_64-aarch64-0.4-1.12 ######################################## [ 111s] python3-3.13.1-1.1 ######################################## [ 111s] python3-devel-3.13.1-1.26 ######################################## [ 111s] build-20120927-1.1 ######################################## [ 111s] libxml2-devel-2.13.5-1.24 ######################################## [ 112s] elfutils-0.189-1.25 ######################################## [ 112s] libncurses-6.4-1.26 ######################################## [ 112s] less-685-1.1 ######################################## [ 113s] libstdc++-devel-14.2.0-2.7 ######################################## [ 114s] glibc-locale-2.40-2.16 ######################################## [ 114s] tzdata-2025b-1.1 ######################################## [ 117s] cpp-14.2.0-2.7 ######################################## [ 120s] gcc-c++-14.2.0-2.7 ######################################## [ 120s] build-compare-2023.06.18-1.11 ######################################## [ 120s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 128s] qemu-linux-user-x86_64-cross-9.2.3.1-2######################################## [ 129s] gawk-3.1.5-1.1 ######################################## [ 129s] cpio-2.8-1.1 ######################################## [ 129s] diffutils-3.10-1.2 ######################################## [ 129s] hostname-3.23-1.1 ######################################## [ 129s] net-tools-2.0_20121208git-1.17 ######################################## [ 129s] update-alternatives-1.22.2-1.1 ######################################## [ 129s] which-2.17-1.1 ######################################## [ 132s] now finalizing build dir... [ 135s] ----------------------------------------------------------------- [ 135s] I have the following modifications for python3-libxml2.spec: [ 135s] 4c4 [ 135s] < Release: 0 [ 135s] --- [ 135s] > Release: 1.11 [ 136s] build target is aarch64-tizen-linux [ 136s] ----------------------------------------------------------------- [ 136s] ----- building python3-libxml2.spec (user abuild) [ 136s] ----------------------------------------------------------------- [ 136s] ----------------------------------------------------------------- [ 137s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/970d2d0bbdce2b433057d5956cb9196e-python3-libxml2' /home/abuild/rpmbuild/SOURCES/python3-libxml2.spec [ 137s] Building target platforms: aarch64-tizen-linux [ 137s] Building for target aarch64-tizen-linux [ 137s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.EODERv [ 137s] + umask 022 [ 137s] + cd /home/abuild/rpmbuild/BUILD [ 137s] + cd /home/abuild/rpmbuild/BUILD [ 137s] + rm -rf python3-libxml2-2.13.5 [ 137s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python3-libxml2-2.13.5.tar.gz [ 137s] + /bin/tar -xof - [ 138s] + STATUS=0 [ 138s] + '[' 0 -ne 0 ']' [ 138s] + cd python3-libxml2-2.13.5 [ 138s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 138s] + echo 'Patch #0 (0001-Bump-to-2.13.5.patch):' [ 138s] Patch #0 (0001-Bump-to-2.13.5.patch): [ 138s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 138s] patching file .gitignore [ 138s] + cp /home/abuild/rpmbuild/SOURCES/python3-libxml2.manifest . [ 138s] + exit 0 [ 138s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.5WTj78 [ 138s] + umask 022 [ 138s] + cd /home/abuild/rpmbuild/BUILD [ 138s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 138s] + export CFLAGS [ 138s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 138s] + export CXXFLAGS [ 138s] + LDFLAGS= [ 138s] + export LDFLAGS [ 138s] + cd python3-libxml2-2.13.5 [ 138s] + ref=/usr/lib/rpm [ 138s] + mints=0 [ 138s] + case $(uname -m) in [ 138s] ++ uname -m [ 139s] + mints=20120610 [ 139s] + for s in guess sub [ 139s] ++ find -maxdepth 8 -name config.guess [ 139s] + for s in guess sub [ 139s] ++ find -maxdepth 8 -name config.sub [ 139s] + export 'CFLAGS=-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fno-strict-aliasing' [ 139s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fno-strict-aliasing' [ 139s] + export PYTHON=/usr/bin/python3 [ 139s] + PYTHON=/usr/bin/python3 [ 139s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fno-strict-aliasing' [ 139s] + export CFLAGS [ 139s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 139s] + export CXXFLAGS [ 139s] + LDFLAGS= [ 139s] + export LDFLAGS [ 139s] + ./autogen.sh --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 181s] libtoolize: putting auxiliary files in '.'. [ 181s] libtoolize: copying file './ltmain.sh' [ 182s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 182s] libtoolize: copying file 'm4/libtool.m4' [ 182s] libtoolize: copying file 'm4/ltoptions.m4' [ 183s] libtoolize: copying file 'm4/ltsugar.m4' [ 183s] libtoolize: copying file 'm4/ltversion.m4' [ 184s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 233s] configure.ac:47: installing './compile' [ 233s] configure.ac:12: installing './config.guess' [ 233s] configure.ac:12: installing './config.sub' [ 233s] configure.ac:42: installing './install-sh' [ 233s] configure.ac:42: installing './missing' [ 235s] Makefile.am: installing './depcomp' [ 242s] python/Makefile.am:31: installing './py-compile' [ 245s] checking build system type... aarch64-tizen-linux-gnu [ 245s] checking host system type... aarch64-tizen-linux-gnu [ 245s] checking for a BSD-compatible install... /bin/install -c [ 245s] checking whether build environment is sane... yes [ 245s] checking for a race-free mkdir -p... /bin/mkdir -p [ 245s] checking for gawk... gawk [ 245s] checking whether make sets $(MAKE)... yes [ 245s] checking whether make supports nested variables... yes [ 246s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 246s] checking whether make supports nested variables... (cached) yes [ 246s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 246s] checking whether the C compiler works... yes [ 246s] checking for C compiler default output file name... a.out [ 246s] checking for suffix of executables... [ 247s] checking whether we are cross compiling... no [ 247s] checking for suffix of object files... o [ 247s] checking whether the compiler supports GNU C... yes [ 247s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 248s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 248s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 248s] checking whether make supports the include directive... yes (GNU style) [ 249s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 249s] checking whether ln -s works... yes [ 249s] checking for tar... /bin/tar [ 249s] checking for perl... /bin/perl [ 249s] checking for wget... /usr/bin/wget [ 249s] checking for xsltproc... /usr/bin/xsltproc [ 249s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 249s] checking pkg-config is at least version 0.9.0... yes [ 249s] checking how to print strings... printf [ 249s] checking for a sed that does not truncate output... /bin/sed [ 249s] checking for grep that handles long lines and -e... /bin/grep [ 249s] checking for egrep... /bin/grep -E [ 249s] checking for fgrep... /bin/grep -F [ 249s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 249s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 249s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 249s] checking the name lister (/bin/nm -B) interface... BSD nm [ 250s] checking the maximum length of command line arguments... 1572864 [ 250s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 250s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 250s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 250s] checking for file... file [ 250s] checking for aarch64-tizen-linux-gnu-objdump... no [ 250s] checking for objdump... objdump [ 250s] checking how to recognize dependent libraries... pass_all [ 250s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 250s] checking for dlltool... no [ 250s] checking how to associate runtime and link libraries... printf %s\n [ 250s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 250s] checking for ranlib... ranlib [ 250s] checking for aarch64-tizen-linux-gnu-ar... no [ 250s] checking for ar... ar [ 250s] checking for archiver @FILE support... @ [ 250s] checking for aarch64-tizen-linux-gnu-strip... no [ 250s] checking for strip... strip [ 250s] checking command to parse /bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 250s] checking for sysroot... no [ 251s] checking for a working dd... /bin/dd [ 251s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 251s] checking for aarch64-tizen-linux-gnu-mt... no [ 251s] checking for mt... no [ 251s] checking if : is a manifest tool... no [ 251s] checking for stdio.h... yes [ 251s] checking for stdlib.h... yes [ 251s] checking for string.h... yes [ 252s] checking for inttypes.h... yes [ 252s] checking for stdint.h... yes [ 252s] checking for strings.h... yes [ 252s] checking for sys/stat.h... yes [ 252s] checking for sys/types.h... yes [ 253s] checking for unistd.h... yes [ 253s] checking for dlfcn.h... yes [ 253s] checking for objdir... .libs [ 253s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 253s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 254s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 254s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 254s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 254s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 255s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 255s] checking whether -lc should be explicitly linked in... no [ 256s] checking dynamic linker characteristics... GNU/Linux ld.so [ 256s] checking how to hardcode library paths into programs... immediate [ 256s] checking whether stripping libraries is possible... yes [ 256s] checking if libtool supports shared libraries... yes [ 256s] checking whether to build shared libraries... yes [ 256s] checking whether to build static libraries... no [ 256s] checking for cos in -lm... yes [ 256s] checking for stdint.h... (cached) yes [ 256s] checking for fcntl.h... yes [ 256s] checking for unistd.h... (cached) yes [ 256s] checking for sys/stat.h... (cached) yes [ 256s] checking for sys/mman.h... yes [ 256s] checking for sys/time.h... yes [ 257s] checking for sys/timeb.h... yes [ 257s] checking for sys/random.h... yes [ 257s] checking for dl.h... no [ 257s] checking for dlfcn.h... (cached) yes [ 257s] checking for glob.h... yes [ 258s] checking for gettimeofday... yes [ 258s] checking for ftime... yes [ 258s] checking for stat... yes [ 258s] checking for mmap... yes [ 258s] checking for munmap... yes [ 259s] checking for aarch64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed [ 259s] checking whether getentropy is declared... yes [ 259s] checking whether __attribute__((destructor)) is accepted... yes [ 260s] checking whether the linker accepts -Wl,--undefined-version... yes [ 260s] checking for python version... 3.13 [ 261s] checking for python platform... linux [ 261s] checking for GNU default python prefix... ${prefix} [ 261s] checking for GNU default python exec_prefix... ${exec_prefix} [ 263s] checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.13/site-packages [ 264s] checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.13/site-packages [ 265s] checking for python-3.13... yes [ 265s] checking for library containing dlopen... none required [ 265s] checking for pthread.h... yes [ 266s] checking for library containing pthread_create... none required [ 266s] checking for libiconv... none required [ 266s] checking that generated files are newer than configure... done [ 266s] configure: creating ./config.status [ 275s] config.status: creating Makefile [ 275s] config.status: creating include/Makefile [ 276s] config.status: creating include/libxml/Makefile [ 276s] config.status: creating include/private/Makefile [ 276s] config.status: creating doc/Makefile [ 277s] config.status: creating doc/devhelp/Makefile [ 277s] config.status: creating example/Makefile [ 277s] config.status: creating fuzz/Makefile [ 278s] config.status: creating python/Makefile [ 278s] config.status: creating python/tests/Makefile [ 278s] config.status: creating xstc/Makefile [ 278s] config.status: creating include/libxml/xmlversion.h [ 279s] config.status: creating libxml-2.0.pc [ 279s] config.status: creating libxml-2.0-uninstalled.pc [ 279s] config.status: creating libxml2-config.cmake [ 279s] config.status: creating python/setup.py [ 280s] config.status: creating xml2-config [ 280s] config.status: creating config.h [ 281s] config.status: executing depfiles commands [ 288s] config.status: executing libtool commands [ 289s] [ 289s] Now type 'make' to compile libxml2. [ 289s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fno-strict-aliasing' [ 289s] + export CFLAGS [ 289s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 289s] + export CXXFLAGS [ 289s] + LDFLAGS= [ 289s] + export LDFLAGS [ 289s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-fexceptions --with-history --enable-ipv6 --with-sax1 --with-regexps --with-threads --with-reader --with-http [ 291s] configure: WARNING: unrecognized options: --with-fexceptions [ 292s] checking build system type... aarch64-tizen-linux-gnu [ 292s] checking host system type... aarch64-tizen-linux-gnu [ 292s] checking for a BSD-compatible install... /bin/install -c [ 292s] checking whether build environment is sane... yes [ 292s] checking for a race-free mkdir -p... /bin/mkdir -p [ 292s] checking for gawk... gawk [ 292s] checking whether make sets $(MAKE)... yes [ 293s] checking whether make supports nested variables... yes [ 293s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 293s] checking whether make supports nested variables... (cached) yes [ 293s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 293s] checking whether the C compiler works... yes [ 293s] checking for C compiler default output file name... a.out [ 294s] checking for suffix of executables... [ 294s] checking whether we are cross compiling... no [ 294s] checking for suffix of object files... o [ 294s] checking whether the compiler supports GNU C... yes [ 294s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 295s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 295s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 295s] checking whether make supports the include directive... yes (GNU style) [ 295s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 295s] checking whether ln -s works... yes [ 295s] checking for tar... /bin/tar [ 295s] checking for perl... /bin/perl [ 295s] checking for wget... /usr/bin/wget [ 295s] checking for xsltproc... /usr/bin/xsltproc [ 295s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 295s] checking pkg-config is at least version 0.9.0... yes [ 295s] checking how to print strings... printf [ 296s] checking for a sed that does not truncate output... /bin/sed [ 296s] checking for grep that handles long lines and -e... /bin/grep [ 296s] checking for egrep... /bin/grep -E [ 296s] checking for fgrep... /bin/grep -F [ 296s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 296s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 296s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 296s] checking the name lister (/bin/nm -B) interface... BSD nm [ 296s] checking the maximum length of command line arguments... 1572864 [ 296s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 296s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 296s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 296s] checking for file... file [ 296s] checking for aarch64-tizen-linux-gnu-objdump... no [ 296s] checking for objdump... objdump [ 296s] checking how to recognize dependent libraries... pass_all [ 296s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 296s] checking for dlltool... no [ 296s] checking how to associate runtime and link libraries... printf %s\n [ 296s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 296s] checking for ranlib... ranlib [ 296s] checking for aarch64-tizen-linux-gnu-ar... no [ 296s] checking for ar... ar [ 297s] checking for archiver @FILE support... @ [ 297s] checking for aarch64-tizen-linux-gnu-strip... no [ 297s] checking for strip... strip [ 297s] checking command to parse /bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 297s] checking for sysroot... no [ 297s] checking for a working dd... /bin/dd [ 298s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 298s] checking for aarch64-tizen-linux-gnu-mt... no [ 298s] checking for mt... no [ 298s] checking if : is a manifest tool... no [ 298s] checking for stdio.h... yes [ 298s] checking for stdlib.h... yes [ 298s] checking for string.h... yes [ 298s] checking for inttypes.h... yes [ 298s] checking for stdint.h... yes [ 299s] checking for strings.h... yes [ 299s] checking for sys/stat.h... yes [ 299s] checking for sys/types.h... yes [ 299s] checking for unistd.h... yes [ 299s] checking for dlfcn.h... yes [ 299s] checking for objdir... .libs [ 300s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 300s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 300s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 300s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 301s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 301s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 301s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 301s] checking whether -lc should be explicitly linked in... no [ 301s] checking dynamic linker characteristics... GNU/Linux ld.so [ 301s] checking how to hardcode library paths into programs... immediate [ 301s] checking whether stripping libraries is possible... yes [ 301s] checking if libtool supports shared libraries... yes [ 301s] checking whether to build shared libraries... yes [ 301s] checking whether to build static libraries... no [ 302s] checking for cos in -lm... yes [ 302s] checking for stdint.h... (cached) yes [ 302s] checking for fcntl.h... yes [ 302s] checking for unistd.h... (cached) yes [ 302s] checking for sys/stat.h... (cached) yes [ 302s] checking for sys/mman.h... yes [ 302s] checking for sys/time.h... yes [ 302s] checking for sys/timeb.h... yes [ 302s] checking for sys/random.h... yes [ 303s] checking for dl.h... no [ 303s] checking for dlfcn.h... (cached) yes [ 303s] checking for glob.h... yes [ 303s] checking for gettimeofday... yes [ 304s] checking for ftime... yes [ 304s] checking for stat... yes [ 304s] checking for mmap... yes [ 304s] checking for munmap... yes [ 304s] checking for aarch64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed [ 305s] checking whether getentropy is declared... yes [ 305s] checking for sys/socket.h... yes [ 305s] checking for netinet/in.h... yes [ 305s] checking for arpa/inet.h... yes [ 305s] checking for netdb.h... yes [ 306s] checking for sys/select.h... yes [ 306s] checking for poll.h... yes [ 306s] checking for library containing gethostbyname... none required [ 306s] checking for library containing connect... none required [ 306s] checking for type of socket length (socklen_t)... socklen_t * [ 307s] checking whether to enable IPv6... yes [ 307s] checking whether __attribute__((destructor)) is accepted... yes [ 307s] checking whether the linker accepts -Wl,--undefined-version... yes [ 307s] Enabling HTTP support [ 308s] checking for python version... 3.13 [ 309s] checking for python platform... linux [ 309s] checking for GNU default python prefix... ${prefix} [ 309s] checking for GNU default python exec_prefix... ${exec_prefix} [ 310s] checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.13/site-packages [ 311s] checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.13/site-packages [ 311s] checking for python-3.13... yes [ 312s] checking for library containing dlopen... none required [ 312s] checking for pthread.h... yes [ 312s] checking for library containing pthread_create... none required [ 312s] Enabling xmllint shell history [ 312s] checking for tputs in -lncurses... no [ 313s] checking for tputs in -lcurses... no [ 313s] checking for tputs in -ltermcap... no [ 313s] checking for tputs in -lterminfo... no [ 314s] checking for tputs in -ltermlib... no [ 314s] checking for readline/history.h... yes [ 314s] checking for append_history in -lhistory... yes [ 314s] checking for readline/readline.h... yes [ 315s] checking for readline in -lreadline... yes [ 315s] checking for libiconv... none required [ 315s] checking that generated files are newer than configure... done [ 315s] configure: creating ./config.status [ 323s] config.status: creating Makefile [ 323s] config.status: creating include/Makefile [ 324s] config.status: creating include/libxml/Makefile [ 324s] config.status: creating include/private/Makefile [ 324s] config.status: creating doc/Makefile [ 325s] config.status: creating doc/devhelp/Makefile [ 325s] config.status: creating example/Makefile [ 325s] config.status: creating fuzz/Makefile [ 326s] config.status: creating python/Makefile [ 326s] config.status: creating python/tests/Makefile [ 326s] config.status: creating xstc/Makefile [ 326s] config.status: creating include/libxml/xmlversion.h [ 327s] config.status: creating libxml-2.0.pc [ 327s] config.status: creating libxml-2.0-uninstalled.pc [ 327s] config.status: creating libxml2-config.cmake [ 328s] config.status: creating python/setup.py [ 328s] config.status: creating xml2-config [ 328s] config.status: creating config.h [ 329s] config.status: executing depfiles commands [ 331s] config.status: executing libtool commands [ 331s] configure: WARNING: unrecognized options: --with-fexceptions [ 332s] + mkdir .libs [ 332s] + cp -v /usr/lib64/libxml2.la . [ 332s] `/usr/lib64/libxml2.la' -> `./libxml2.la' [ 332s] + make -C python -j12 [ 332s] make: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 332s] /usr/bin/python3 ./generator.py . [ 336s] Found 1644 functions in libxml2-api.xml [ 336s] Found 53 functions in libxml2-python-api.xml [ 336s] Generated 894 wrapper functions, 593 failed, 210 skipped [ 337s] make all-recursive [ 337s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 337s] Making all in . [ 337s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 337s] CC libxml.lo [ 339s] CC types.lo [ 341s] CC libxml2-py.lo [ 350s] CCLD libxml2mod.la [ 351s] cat ./libxml.py `test -f libxml2class.py || echo ./`libxml2class.py > libxml2.py [ 351s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 351s] Making all in tests [ 351s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 351s] make[2]: Nothing to be done for 'all'. [ 351s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 351s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 351s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 351s] + exit 0 [ 351s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.lkJqQq [ 351s] + umask 022 [ 351s] + cd /home/abuild/rpmbuild/BUILD [ 351s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64 [ 351s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64 [ 351s] + cd python3-libxml2-2.13.5 [ 351s] + make -C python install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64 pythondir=/usr/lib/python3.13/site-packages PYTHON_SITE_PACKAGES=/usr/lib/python3.13/site-packages [ 351s] make: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 351s] make install-recursive [ 351s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 351s] Making install in . [ 352s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 352s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 352s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/lib64/python3.13/site-packages' [ 352s] /bin/sh ../libtool --mode=install /bin/install -c libxml2mod.la '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/lib64/python3.13/site-packages' [ 352s] libtool: install: /bin/install -c .libs/libxml2mod.so /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/lib64/python3.13/site-packages/libxml2mod.so [ 352s] libtool: install: /bin/install -c .libs/libxml2mod.lai /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/lib64/python3.13/site-packages/libxml2mod.la [ 352s] libtool: warning: remember to run 'libtool --finish /usr/lib64/python3.13/site-packages' [ 352s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/lib/python3.13/site-packages' [ 352s] /bin/install -c -m 644 libxml2.py '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/lib/python3.13/site-packages' [ 353s] Byte-compiling python modules... [ 355s] libxml2.py [ 356s] Byte-compiling python modules (optimized versions) ... [ 357s] libxml2.py [ 357s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/lib/python3.13/site-packages' [ 357s] /bin/install -c -m 644 drv_libxml2.py '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/lib/python3.13/site-packages' [ 358s] Byte-compiling python modules... [ 358s] drv_libxml2.py [ 359s] Byte-compiling python modules (optimized versions) ... [ 359s] drv_libxml2.py [ 360s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 360s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 360s] Making install in tests [ 360s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 360s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 360s] make[3]: Nothing to be done for 'install-exec-am'. [ 360s] make[3]: Nothing to be done for 'install-data-am'. [ 360s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 360s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python/tests' [ 360s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 360s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python' [ 360s] + chmod a-x python/tests/attribs.py python/tests/build.py python/tests/compareNodes.py python/tests/ctxterror.py python/tests/cutnpaste.py python/tests/dtdvalid.py python/tests/error.py python/tests/inbuf.py python/tests/indexes.py python/tests/input_callback.py python/tests/nsdel.py python/tests/outbuf.py python/tests/push.py python/tests/pushSAX.py python/tests/pushSAXhtml.py python/tests/reader.py python/tests/reader2.py python/tests/reader3.py python/tests/reader4.py python/tests/reader5.py python/tests/reader6.py python/tests/reader7.py python/tests/reader8.py python/tests/readererr.py python/tests/readernext.py python/tests/regexp.py python/tests/relaxng.py python/tests/resolver.py python/tests/schema.py python/tests/serialize.py python/tests/setup_test.py python/tests/sync.py python/tests/thread2.py python/tests/tst.py python/tests/tstLastError.py python/tests/tstURI.py python/tests/tstmem.py python/tests/tstxpath.py python/tests/validDTD.py python/tests/validRNG.py python/tests/validSchemas.py python/tests/validate.py python/tests/walker.py python/tests/xpath.py python/tests/xpathext.py python/tests/xpathleak.py python/tests/xpathns.py python/tests/xpathret.py [ 360s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/share/doc [ 360s] + rm -f /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/lib64/python3.13/site-packages/libxml2mod.la '/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/lib64/python3.13/site-packages/*.a' [ 360s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.13.5-1.11 --unique-debug-src-base python3-libxml2-2.13.5-1.11.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 361s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/lib64/python3.13/site-packages/libxml2mod.so [ 361s] 2127 blocks [ 361s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python3-libxml2-debuginfo.manifest [ 362s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/python3-libxml2-debugsource.manifest [ 362s] + /usr/lib/rpm/check-buildroot [ 362s] + /usr/lib/rpm//brp-compress [ 362s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 363s] + /usr/lib/rpm/brp-python-hardlink [ 364s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64 [ 364s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/python3-libxml2-2.13.5/isu.list [ 364s] ~/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64 ~/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 364s] ~/rpmbuild/BUILD/python3-libxml2-2.13.5 [ 364s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 368s] Processing files: python3-libxml2-2.13.5-1.11.aarch64 [ 368s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 368s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 368s] [ 368s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.3g1lA2 [ 368s] + umask 022 [ 368s] + cd /home/abuild/rpmbuild/BUILD [ 368s] + cd python3-libxml2-2.13.5 [ 368s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/share/doc/packages/python3-libxml2 [ 368s] + export LC_ALL=C [ 368s] + LC_ALL=C [ 368s] + export DOCDIR [ 368s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/share/doc/packages/python3-libxml2 [ 368s] + cp -pr python/libxml2class.txt /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/share/doc/packages/python3-libxml2 [ 368s] + cp -pr python/tests /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/share/doc/packages/python3-libxml2 [ 368s] + exit 0 [ 368s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.wc8DwF [ 368s] + umask 022 [ 368s] + cd /home/abuild/rpmbuild/BUILD [ 368s] + cd python3-libxml2-2.13.5 [ 368s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/share/licenses/python3-libxml2 [ 368s] + export LC_ALL=C [ 368s] + LC_ALL=C [ 368s] + export LICENSEDIR [ 368s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/share/licenses/python3-libxml2 [ 368s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64/usr/share/licenses/python3-libxml2 [ 368s] + exit 0 [ 369s] Provides: libxml2-python3 = 2.13.5 libxml2mod.so()(64bit) python3-libxml2 = 2.13.5-1.11 python3-libxml2(aarch-64) = 2.13.5-1.11 [ 369s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 369s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.28)(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.5.0)(64bit) libxml2.so.2(LIBXML2_2.5.2)(64bit) libxml2.so.2(LIBXML2_2.5.4)(64bit) libxml2.so.2(LIBXML2_2.5.6)(64bit) libxml2.so.2(LIBXML2_2.5.7)(64bit) libxml2.so.2(LIBXML2_2.5.8)(64bit) libxml2.so.2(LIBXML2_2.5.9)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) libxml2.so.2(LIBXML2_2.6.1)(64bit) libxml2.so.2(LIBXML2_2.6.10)(64bit) libxml2.so.2(LIBXML2_2.6.11)(64bit) libxml2.so.2(LIBXML2_2.6.12)(64bit) libxml2.so.2(LIBXML2_2.6.14)(64bit) libxml2.so.2(LIBXML2_2.6.15)(64bit) libxml2.so.2(LIBXML2_2.6.16)(64bit) libxml2.so.2(LIBXML2_2.6.17)(64bit) libxml2.so.2(LIBXML2_2.6.18)(64bit) libxml2.so.2(LIBXML2_2.6.2)(64bit) libxml2.so.2(LIBXML2_2.6.20)(64bit) libxml2.so.2(LIBXML2_2.6.21)(64bit) libxml2.so.2(LIBXML2_2.6.23)(64bit) libxml2.so.2(LIBXML2_2.6.25)(64bit) libxml2.so.2(LIBXML2_2.6.27)(64bit) libxml2.so.2(LIBXML2_2.6.28)(64bit) libxml2.so.2(LIBXML2_2.6.3)(64bit) libxml2.so.2(LIBXML2_2.6.5)(64bit) libxml2.so.2(LIBXML2_2.6.6)(64bit) libxml2.so.2(LIBXML2_2.6.8)(64bit) libxml2.so.2(LIBXML2_2.7.0)(64bit) libxml2.so.2(LIBXML2_2.7.3)(64bit) libxml2.so.2(LIBXML2_2.8.0)(64bit) libxml2.so.2(LIBXML2_2.9.0)(64bit) libxml2.so.2(LIBXML2_2.9.1)(64bit) libxml2.so.2(LIBXML2_2.9.11)(64bit) [ 369s] Obsoletes: libxml2-python3 < 2.13.5 [ 369s] Processing files: python3-libxml2-debugsource-2.13.5-1.11.aarch64 [ 369s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 369s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 369s] [ 369s] Provides: python3-libxml2-debugsource = 2.13.5-1.11 python3-libxml2-debugsource(aarch-64) = 2.13.5-1.11 [ 369s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 369s] Processing files: python3-libxml2-debuginfo-2.13.5-1.11.aarch64 [ 369s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 369s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 369s] [ 369s] Provides: python3-libxml2-debuginfo = 2.13.5-1.11 python3-libxml2-debuginfo(aarch-64) = 2.13.5-1.11 [ 369s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 369s] Recommends: python3-libxml2-debugsource(aarch-64) = 2.13.5-1.11 [ 369s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64 [ 370s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-libxml2-2.13.5-1.11.src.rpm [ 371s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/python3-libxml2-2.13.5-1.11.aarch64.rpm [ 371s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/python3-libxml2-debugsource-2.13.5-1.11.aarch64.rpm [ 371s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/python3-libxml2-debuginfo-2.13.5-1.11.aarch64.rpm [ 371s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.AR99os [ 371s] + umask 022 [ 371s] + cd /home/abuild/rpmbuild/BUILD [ 371s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64 [ 371s] + cd python3-libxml2-2.13.5 [ 371s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-libxml2-2.13.5-1.11.aarch64 [ 371s] + exit 0 [ 372s] ... checking for files with abuild user/group [ 372s] ... creating baselibs [ 374s] ... comparing built packages with the former built [ 374s] /usr/lib/build/pkg-diff.sh [ 374s] compare /.build.oldpackages/python3-libxml2-2.13.5-1.10.src.rpm /home/abuild/rpmbuild/SRPMS/python3-libxml2-2.13.5-1.11.src.rpm [ 374s] This is not a prerelease project. Compare the project name. [ 374s] comparing disturl_distribution [ 375s] comparing the rpm tags of python3-libxml2 [ 375s] --- old-rpm-tags [ 375s] +++ new-rpm-tags [ 375s] @@ -90 +90 @@ [ 375s] -python3-libxml2.spec a2a0c42a87f6cbaf9178f89a19fb45f1b85d36e5ad4338844569c81922dcefe8 32 [ 375s] +python3-libxml2.spec 0f86f94cfebd3d6f23aa2f5307004db26b9a87deb808dd202d5e7877aca0498c 32 [ 375s] comparing rpmtags [ 375s] comparing RELEASE [ 375s] comparing PROVIDES [ 375s] comparing scripts [ 375s] comparing filelist [ 375s] comparing file checksum [ 376s] compare /.build.oldpackages/python3-libxml2-2.13.5-1.10.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/python3-libxml2-2.13.5-1.11.aarch64.rpm [ 377s] Comparing python3-libxml2-2.13.5-1.10.aarch64.rpm to python3-libxml2-2.13.5-1.11.aarch64.rpm [ 377s] This is not a prerelease project. Compare the project name. [ 377s] comparing disturl_distribution [ 377s] comparing the rpm tags of python3-libxml2 [ 377s] --- old-rpm-tags [ 377s] +++ new-rpm-tags [ 377s] @@ -200,4 +200,4 @@ [ 377s] -/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.opt-1.pyc d7185ec9645bc3bf4cbecc2a589a6aa5b55f7ab95360923d3a30e0c75c402c0c 0 [ 377s] -/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.pyc d7185ec9645bc3bf4cbecc2a589a6aa5b55f7ab95360923d3a30e0c75c402c0c 0 [ 377s] -/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.opt-1.pyc e4bcb4da11e06621cca00cac142ae9efa88f4cb1e0b66fdcd8fde65ba900abb2 0 [ 377s] -/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.pyc e4bcb4da11e06621cca00cac142ae9efa88f4cb1e0b66fdcd8fde65ba900abb2 0 [ 377s] +/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.opt-1.pyc 70b0bfc7e21578777f27a970038c83fea9e2c861ec38f447cae76b844f77b267 0 [ 377s] +/usr/lib/python3.13/site-packages/__pycache__/drv_libxml2.cpython-313.pyc 70b0bfc7e21578777f27a970038c83fea9e2c861ec38f447cae76b844f77b267 0 [ 377s] +/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.opt-1.pyc db8712a78918a00e21c40289f509b7d7d7794ef1edffd580ed5abff2b3d6faa6 0 [ 377s] +/usr/lib/python3.13/site-packages/__pycache__/libxml2.cpython-313.pyc db8712a78918a00e21c40289f509b7d7d7794ef1edffd580ed5abff2b3d6faa6 0 [ 377s] @@ -206 +206 @@ [ 377s] -/usr/lib64/python3.13/site-packages/libxml2mod.so c5a6b74f1d05d2f12219752bf4c30d78dc0855973b35c0fdccad00b865121a03 0 [ 377s] +/usr/lib64/python3.13/site-packages/libxml2mod.so db57678876d2e339d0a1103344957d2acdf4c7f429f6293841bf8438f30d5f54 0 [ 377s] @@ -210 +210 @@ [ 377s] -/usr/share/doc/packages/python3-libxml2/tests/Makefile 9a9e9be7299dfee61bae85611b86c076c14ace955e5ba9837ba524f986cc5c28 2 [ 377s] +/usr/share/doc/packages/python3-libxml2/tests/Makefile 426e9ddb78489a8423a43c9f9726b1e4e99fa43a9882946b04e9d4d5a5f6001c 2 [ 377s] @@ -273 +273 @@ [ 377s] -python3-libxml2-2.13.5-1.10.src.rpm [ 377s] +python3-libxml2-2.13.5-1.11.src.rpm [ 377s] comparing rpmtags [ 377s] comparing RELEASE [ 378s] comparing PROVIDES [ 378s] comparing scripts [ 378s] comparing filelist [ 378s] comparing file checksum [ 378s] creating rename script [ 378s] RPM file checksum differs. [ 378s] Extracting packages [ 380s] /usr/share/doc/packages/python3-libxml2/tests/Makefile differs (ASCII text, with very long lines (333)) [ 380s] --- old//usr/share/doc/packages/python3-libxml2/tests/Makefile 2025-12-24 11:33:48.000000000 +0900 [ 380s] +++ new//usr/share/doc/packages/python3-libxml2/tests/Makefile 2025-12-26 15:38:51.000000000 +0900 [ 380s] @@ -221,7 +221,7 @@ [ 380s] RANLIB = ranlib [ 380s] RDL_CFLAGS = [ 380s] RDL_LIBS = -lreadline -lhistory [ 380s] -RELDATE = Wed Dec 24 2025 [ 380s] +RELDATE = Fri Dec 26 2025 [ 380s] SED = /bin/sed [ 380s] SET_MAKE = [ 380s] SHELL = /bin/sh [ 380s] compare /.build.oldpackages/python3-libxml2-debuginfo-2.13.5-1.10.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/python3-libxml2-debuginfo-2.13.5-1.11.aarch64.rpm [ 380s] skipping -debuginfo package [ 380s] compare /.build.oldpackages/python3-libxml2-debugsource-2.13.5-1.10.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/python3-libxml2-debugsource-2.13.5-1.11.aarch64.rpm [ 381s] Comparing python3-libxml2-debugsource-2.13.5-1.10.aarch64.rpm to python3-libxml2-debugsource-2.13.5-1.11.aarch64.rpm [ 381s] This is not a prerelease project. Compare the project name. [ 381s] comparing disturl_distribution [ 381s] comparing the rpm tags of python3-libxml2-debugsource [ 381s] --- old-rpm-tags [ 381s] +++ new-rpm-tags [ 381s] @@ -170 +170 @@ [ 381s] -python3-libxml2-2.13.5-1.10.src.rpm [ 381s] +python3-libxml2-2.13.5-1.11.src.rpm [ 381s] comparing rpmtags [ 381s] comparing RELEASE [ 381s] comparing PROVIDES [ 382s] comparing scripts [ 382s] comparing filelist [ 382s] comparing file checksum [ 382s] creating rename script [ 382s] RPM meta information is identical [ 382s] No rpmlint.log available [ 382s] [ 382s] db4add51c2d9 finished "build python3-libxml2.spec" at Fri Dec 26 06:39:47 UTC 2025. [ 382s]