# packages

pkgId: 0f80fd7ac0515dd20587c4556cbc50f89cf8f0db21619395434df4fbc9ea1d69
name: org.tizen.widget_viewer_sdk
arch: armv7l
version: 0.0.1
epoch: 0
release: 1
summary: The widget viewer for development using SDK(IDE)
rpm_license: Flora-1.1
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: libwidget_viewer-1.10.1-1.src.rpm
location_href: armv7l/org.tizen.widget_viewer_sdk-0.0.1-1.armv7l.rpm
checksum_type: sha256
description:
  While developing the widget applications, this viewer will load it and execute it to help you to see it on the screen.


pkgId: c61f7e043be3e1f26fac5dff7d8ff5b43fbf75a4be9c61e1b9998509f90be0e6
name: org.tizen.xamediahub
arch: armv7l
version: 1.0.0
epoch: 0
release: 1
summary: mediahub application
rpm_license: Flora-1.1
rpm_vendor: tizen
rpm_group: Applications
rpm_sourcerpm: org.tizen.xamediahub-1.0.0-1.src.rpm
location_href: armv7l/org.tizen.xamediahub-1.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  This is a container package which includes preloaded application package as the TPK file format.
  During installation of this package, the preloaded application package would be dropped into a specific folder.
  The folder will be searched by the system and the system will install the TPK files in the folder automatically.


pkgId: 811278425c088971825680555bbcae442b7a4f3a375ecb25f005936dceb27015
name: paho-mqtt-c-devel
arch: armv7l
version: 1.3.13
epoch: 0
release: 0
summary: MQTT C Client development files
url: https://www.eclipse.org/paho/clients/c/
rpm_license: EPL-2.0
rpm_vendor: tizen
rpm_group: Productivity/Networking/Other
rpm_sourcerpm: paho-mqtt-c-1.3.13-0.src.rpm
location_href: armv7l/paho-mqtt-c-devel-1.3.13-0.armv7l.rpm
checksum_type: sha256
description:
  The Paho MQTT C Client is a fully featured MQTT client written in ANSI standard
  C. C was chosen rather than C++ to maximize portability. A C++ API over this
  library is also available in Paho.

  In fact there are two C APIs. "Synchronous" and "asynchronous" for which the
  API calls start with MQTTClient and MQTTAsync respectively. The synchronous API
  is intended to be simpler and more helpful. To this end, some of the calls will
  block until the operation has completed, which makes programming easier. In
  contrast, only one call blocks in the asynchronous API - waitForCompletion.
  Notifications of results are made by callbacks which makes the API suitable for
  use in environments where the application is not the main thread of control.

  This package contains development files.


pkgId: b65bf1f709e42997a21a6d98461fd94f33fc4a85d928c19bfdc7c8bed05f378a
name: parted
arch: armv7l
version: 3.6
epoch: 0
release: 1
summary: The GNU disk partition manipulation program
url: http://www.gnu.org/software/parted
rpm_license: GPL-3.0+
rpm_vendor: tizen
rpm_group: Applications/System
rpm_sourcerpm: parted-3.6-1.src.rpm
location_href: armv7l/parted-3.6-1.armv7l.rpm
checksum_type: sha256
description:
  The GNU Parted program allows you to create, destroy, resize, move,
  and copy hard disk partitions. Parted can be used for creating space
  for new operating systems, reorganizing disk usage, and copying data
  to new hard disks.


pkgId: b6db4ea8036659ddfbe0991e7053d8920b77edd5b1ae4275e6f6b08a36cf9c03
name: parted-devel
arch: armv7l
version: 3.6
epoch: 0
release: 1
summary: Files for developing apps which will manipulate disk partitions
url: http://www.gnu.org/software/parted
rpm_license: GPL-3.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: parted-3.6-1.src.rpm
location_href: armv7l/parted-devel-3.6-1.armv7l.rpm
checksum_type: sha256
description:
  The GNU Parted library is a set of routines for hard disk partition
  manipulation. If you want to develop programs that manipulate disk
  partitions and filesystems using the routines provided by the GNU
  Parted library, you need to install this package.


pkgId: cc85488a6236927c5c61461c2b6be31c24b9e589e680340bf0e28101593ffb5c
name: pen-wave-devel
arch: armv7l
version: 1.4.0
epoch: 0
release: 2
summary: PenWave Engine(Development)
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: DALI/NUI
rpm_sourcerpm: pen-wave-1.4.0-2.src.rpm
location_href: armv7l/pen-wave-devel-1.4.0-2.armv7l.rpm
checksum_type: sha256
description:
  This package contains all necessary include files and libraries needed
  to develop applications that require pen-wave.


pkgId: c8eccd21924088a0129ebbae4d4f38afcd58b6daa2e8b1e2d4dcca49a7dc65f0
name: perl-Capture-Tiny
arch: armv7l
version: 0.48
epoch: 0
release: 0
summary: Capture STDOUT and STDERR from Perl, XS or external programs
url: https://metacpan.org/pod/Capture::Tiny
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Capture-Tiny-0.48-0.src.rpm
location_href: armv7l/perl-Capture-Tiny-0.48-0.armv7l.rpm
checksum_type: sha256
description:
  Capture::Tiny provides a simple, portable way to capture almost anything
  sent to STDOUT or STDERR, regardless of whether it comes from Perl,
  from XS code or from an external program. Optionally, output can be teed
  so that it is captured while being passed through to the original filehandles.
   Yes, it even works on Windows (usually). Stop guessing which of a dozen
  capturing modules to use in any particular situation and just use this one.


pkgId: ce56ce5224843c4948defaa882a650b771750c131a65454c2d6b7f271417d224
name: perl-Class-Data-Inheritable
arch: armv7l
version: 0.10
epoch: 0
release: 0
summary: Inheritable, overridable class data
url: https://metacpan.org/pod/Class::Data::Inheritable
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Class-Data-Inheritable-0.10-0.src.rpm
location_href: armv7l/perl-Class-Data-Inheritable-0.10-0.armv7l.rpm
checksum_type: sha256
description:
  Class::Data::Inheritable is for creating accessor/mutators to class data.
  That is, if you want to store something about your class as a whole
  (instead of about a single object).
  This data is then inherited by your subclasses and can be overridden.

  For example:
    Pere::Ubu->mk_classdata('Suitcase');

  will generate the method Suitcase() in the class Pere::Ubu.

  This new method can be used to get and set a piece of class data.

   Pere::Ubu->Suitcase('Red');
   $suitcase = Pere::Ubu->Suitcase;

  The interesting part happens when a class inherits from Pere::Ubu:

   package Raygun;
   use base qw(Pere::Ubu);

   
   $suitcase = Raygun->Suitcase;

  Raygun inherits its Suitcase class data from Pere::Ubu.

  Inheritance of class data works analogous to method inheritance.
  As long as Raygun does not "override" its inherited class data
  (by using Suitcase() to set a new value) it will continue
  to use whatever is set in Pere::Ubu and inherit further changes:

   
   Pere::Ubu->Suitcase('Blue');

  However, should Raygun decide to set its own Suitcase()
  it has now "overridden" Pere::Ubu and is on its own,
  just like if it had overridden a method:

   
   Raygun->Suitcase('Orange');

  Now that Raygun has overridden Pere::Ubu further
  changes by Pere::Ubu no longer effect Raygun.

   
   Pere::Ubu->Suitcase('Samsonite');


pkgId: 6402bc741d85b3adc772b67b4d695bfc45eca42305608b486f5073594b36f2f4
name: perl-Class-Inspector
arch: armv7l
version: 1.36
epoch: 0
release: 0
summary: Get information about a class and its structure
url: https://metacpan.org/pod/Class::Inspector
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Class-Inspector-1.36-0.src.rpm
location_href: armv7l/perl-Class-Inspector-1.36-0.armv7l.rpm
checksum_type: sha256
description:
  Class::Inspector allows you to get information about a loaded class.
  Most or all of this information can be found in other ways,
  but they aren't always very friendly, and usually involve a relatively
  high level of Perl wizardry, or strange and unusual looking code.
  Class::Inspector attempts to provide an easier,
  more friendly interface to this information.


pkgId: 5cf36329ba5d7da4ab57c1d9ddabfdf759662b75926a71e5a7a9d9a5dd6caf2c
name: perl-Class-Singleton
arch: armv7l
version: 1.6
epoch: 0
release: 0
summary: Implementation of a "Singleton" class
url: https://metacpan.org/pod/Class::Singleton
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Class-Singleton-1.6-0.src.rpm
location_href: armv7l/perl-Class-Singleton-1.6-0.armv7l.rpm
checksum_type: sha256
description:
  This is the Class::Singleton module. A Singleton describes
  an object class that can have only one instance in any system.
  An example of a Singleton might be a print spooler or
  system registry. This module implements a Singleton class
  from which other classes can be derived. By itself,
  the Class::Singleton module does very little other than manage
  the instantiation of a single object. In deriving a class
  from Class::Singleton, your module will inherit the Singleton
  instantiation method and can implement whatever specific
  functionality is required.

  For a description and discussion of the Singleton class,
  see "Design Patterns", Gamma et al, Addison-Wesley, 1995, ISBN 0-201-63361-2.


pkgId: d809abe627e800336174c8b3f51ab9663da5e3209622f3f97cc4b7ba3f15fcb1
name: perl-DateTime
arch: armv7l
version: 1.65
epoch: 0
release: 0
summary: A date and time object for Perl
url: https://metacpan.org/pod/DateTime
rpm_license: Artistic License 2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-DateTime-1.65-0.src.rpm
location_href: armv7l/perl-DateTime-1.65-0.armv7l.rpm
checksum_type: sha256
description:
  DateTime is a class for the representation of date/time
  combinations, and is part of the Perl DateTime project.
  It represents the Gregorian calendar, extended backwards
  in time before its creation (in 1582). This is sometimes
  known as the "proleptic Gregorian calendar". In this calendar,
  the first day of the calendar (the epoch),
  is the first day of year 1, which corresponds to the date which
  was (incorrectly) believed to be the birth of Jesus Christ.
  The calendar represented does have a year 0, and in that way differs
  from how dates are often written using "BCE/CE" or "BC/AD".
  For infinite datetimes, please see the DateTime::Infinite module.


pkgId: 73fc5270c4f6033e0c254e97cee59803f3326cd5460dbc40e1d2ef782c05b358
name: perl-DateTime-Locale
arch: armv7l
version: 1.44
epoch: 0
release: 1
summary: Class for locale objects instantiated from pre-defined data
url: https://metacpan.org/pod/DateTime::Locale::FromData
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-DateTime-Locale-1.44-1.src.rpm
location_href: armv7l/perl-DateTime-Locale-1.44-1.armv7l.rpm
checksum_type: sha256
description:
  This class is used to represent locales instantiated
  from the data in the DateTime::Locale::Data module.


pkgId: 95ade2ba329355b44ffe7034af6fc78609a55adb2f2edffb6f7ae98103521f8d
name: perl-DateTime-TimeZone
arch: armv7l
version: 2.63
epoch: 0
release: 1
summary: Time zone object base class and factory
url: https://metacpan.org/pod/DateTime::TimeZone
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-DateTime-TimeZone-2.63-1.src.rpm
location_href: armv7l/perl-DateTime-TimeZone-2.63-1.armv7l.rpm
checksum_type: sha256
description:
  This class is the base class for all time zone objects.
  A time zone is represented internally as a set of observances,
  each of which describes the offset from GMT for a given time period.

  Note that without the DateTime module, this module does not do much.
  It's primary interface is through a DateTime object,
  and most users will not need to directly use DateTime::TimeZone methods.


pkgId: baa316efb1ce9a1e80a2385f736dda200e94a33b10e073fd17f15ceefc9d2a86
name: perl-Devel-StackTrace
arch: armv7l
version: 2.05
epoch: 0
release: 1
summary: An object representing a stack trace
url: https://metacpan.org/pod/Devel::StackTrace
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Devel-StackTrace-2.05-1.src.rpm
location_href: armv7l/perl-Devel-StackTrace-2.05-1.armv7l.rpm
checksum_type: sha256
description:
  The Devel::StackTrace module contains two classes,
  Devel::StackTrace and Devel::StackTrace::Frame. These
  objects encapsulate the information that can
  retrieved via Perl's caller function, as well as
  providing a simple interface to this data.

  The Devel::StackTrace object contains a set of
  Devel::StackTrace::Frame objects, one for each
  level of the stack. The frames contain all the
  data available from caller.
  This code was created to support my
  Exception::Class::Base class (part of
  Exception::Class) but may be useful in other contexts.


pkgId: c44260e7b04aeee96a964ae4a951ee69c01c736e5647456fa06da96813e1bb7e
name: perl-Error
arch: armv7l
version: 0.17029
epoch: 0
release: 0
summary: Error/exception handling in an OO-ish way
url: http://search.cpan.org/dist/Error/
rpm_license: GPL-1.0 or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-Error-0.17029-0.src.rpm
location_href: armv7l/perl-Error-0.17029-0.armv7l.rpm
checksum_type: sha256
description:
  The 'Error' package provides two interfaces. Firstly 'Error' provides a
  procedural interface to exception handling. Secondly 'Error' is a base
  class for errors/exceptions that can either be thrown, for subsequent
  catch, or can simply be recorded.

  Errors in the class 'Error' should not be thrown directly, but the user
  should throw errors from a sub-class of 'Error'.


pkgId: 1c2cff7e38ed6b9e32e22ed0ea745aa158283d02202fa8c6f1cefb99705599ce
name: perl-Eval-Closure
arch: armv7l
version: 0.14
epoch: 0
release: 1
summary: safely and cleanly create closures via string eval
url: https://metacpan.org/pod/Eval::Closure
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Eval-Closure-0.14-1.src.rpm
location_href: armv7l/perl-Eval-Closure-0.14-1.armv7l.rpm
checksum_type: sha256
description:
  String eval is often used for dynamic code generation.
  For instance, Moose uses it heavily, to generate inlined
  versions of accessors and constructors, which speeds code up
  at runtime by a significant amount. String eval is not without
  its issues however - it's difficult to control the scope it's
  used in (which determines which variables are in scope inside the eval),
  and it's easy to miss compilation errors, since eval catches
  them and sticks them in $@ instead.

  This module attempts to solve these problems. It provides an
  eval_closure function, which evals a string in a clean environment,
  other than a fixed list of specified variables. Compilation errors
  are rethrown automatically.


pkgId: 8190b91d8f3bf7a5fd5304b6e7f92df49d1c38919b561bbdb8424a2539eec533
name: perl-Exception-Class
arch: armv7l
version: 1.45
epoch: 0
release: 1
summary: A module that allows you to declare real exception classes in Perl
url: https://metacpan.org/pod/Exception::Class
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Exception-Class-1.45-1.src.rpm
location_href: armv7l/perl-Exception-Class-1.45-1.armv7l.rpm
checksum_type: sha256
description:
  RECOMMENDATION 1: If you are writing modern Perl
  code with Moose or Moo I highly recommend using Throwable
  instead of this module.
  RECOMMENDATION 2: Whether or not you use Throwable,
  you should use Try::Tiny.
  Exception::Class allows you to declare exception
  hierarchies in your modules in a "Java-esque" manner.
  It features a simple interface allowing programmers to 'declare'
  1exception classes at compile time. It also has a base exception
  class, Exception::Class::Base, that can be easily extended.
  It is designed to make structured exception handling simpler
  and better by encouraging people to use hierarchies of exceptions
  in their applications, as opposed to a single catch-all exception class.
  This module does not implement any try/catch syntax. Please see the
  "OTHER EXCEPTION MODULES (try/catch syntax)" section for more
  information on how to get this syntax.
  You will also want to look at the documentation for
  Exception::Class::Base, which is the default base class for
  all exception objects created by this module.


pkgId: 3c95e1bb8e0ac6e2ed786987a3b4b4c6bd0aff174fe5393aa945fdf6d617dd5f
name: perl-FFI-CheckLib
arch: armv7l
version: 0.31
epoch: 0
release: 0
summary: Check that a library is available for FFI
url: https://metacpan.org/release/FFI-CheckLib
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-FFI-CheckLib-0.31-0.src.rpm
location_href: armv7l/perl-FFI-CheckLib-0.31-0.armv7l.rpm
checksum_type: sha256
description:
  This module checks whether a particular dynamic library is available for
  FFI to use. It is modeled heavily on Devel::CheckLib, but will find dynamic
  libraries even when development packages are not installed. It also
  provides a find_lib function that will return the full path to the found
  dynamic library, which can be feed directly into FFI::Platypus or another
  FFI system.


pkgId: 288199acbbb3c46aa57ed1ab1c69e88b9e616fae4c95103e68b83560ce81bb9c
name: perl-File-ShareDir
arch: armv7l
version: 1.118
epoch: 0
release: 1
summary: Locate per-dist and per-module shared files
url: https://metacpan.org/pod/File::ShareDir
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-File-ShareDir-1.118-1.src.rpm
location_href: armv7l/perl-File-ShareDir-1.118-1.armv7l.rpm
checksum_type: sha256
description:
  The intent of File::ShareDir is to provide a companion to Class::Inspector
  and File::HomeDir, modules that take a process that is well-known
  by advanced Perl developers but gets a little tricky,
  and make it more available to the larger Perl community.

  Quite often you want or need your Perl module (CPAN or otherwise)
  to have access to a large amount of read-only data that is stored
  on the file-system at run-time.

  On a linux-like system, this would be in a place such as /usr/share,
  however Perl runs on a wide variety of different systems,
  and so the use of any one location is unreliable.

  Perl provides a little-known method for doing this,
  but almost nobody is aware that it exists. As a result, module authors
  often go through some very strange ways to make the data available to their code.

  The most common of these is to dump the data out to an enormous
  Perl data structure and save it into the module itself.
  The result are enormous multi-megabyte .pm files
  that chew up a lot of memory needlessly.

  Another method is to put the data "file" after the __DATA__
  compiler tag and limit yourself to access as a filehandle.

  The problem to solve is really quite simple.

   1. Write the data files to the system at install time.
   2. Know where you put them at run-time.

  Perl's install system creates an "auto" directory
  for both every distribution and for every module file.

  These are used by a couple of different auto-loading systems
  to store code fragments generated at install time,
  and various other modules written by the Perl "ancient masters".

  But the same mechanism is available to any dist or module to store any sort of data.


pkgId: 6583cd47b2f236bc4624dcdb05b501aae4f1819e2d792d9befb2bc69d7bd269e
name: perl-File-ShareDir-Install
arch: armv7l
version: 0.14
epoch: 0
release: 1
summary: Install shared files
url: https://metacpan.org/pod/File::ShareDir::Install
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-File-ShareDir-Install-0.14-1.src.rpm
location_href: armv7l/perl-File-ShareDir-Install-0.14-1.armv7l.rpm
checksum_type: sha256
description:
  File::ShareDir::Install allows you to install read-only data
  files from a distribution. It is a companion module to File::ShareDir,
  which allows you to locate these files after installation.

  It is a port of Module::Install::Share to ExtUtils::MakeMaker
  with the improvement of only installing the files you want;
  .svn, .git and other source-control junk will be ignored.

  Please note that this module installs read-only data files;
  empty directories will be ignored.


pkgId: e5434b61738201a261a5dcb31e2a6dd9083e60f0e621e30b3ac9b87c23fbff58
name: perl-File-Which
arch: armv7l
version: 1.27
epoch: 0
release: 0
summary: Perl implementation of the which utility as an API
url: https://metacpan.org/release/File-Which
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-File-Which-1.27-0.src.rpm
location_href: armv7l/perl-File-Which-1.27-0.armv7l.rpm
checksum_type: sha256
description:
  File::Which finds the full or relative paths to executable programs on the
  system. This is normally the function of 'which' utility. 'which' is
  typically implemented as either a program or a built in shell command. On
  some platforms, such as Microsoft Windows it is not provided as part of the
  core operating system. This module provides a consistent API to this
  functionality regardless of the underlying platform.

  The focus of this module is correctness and portability. As a consequence
  platforms where the current directory is implicitly part of the search path
  such as Microsoft Windows will find executables in the current directory,
  whereas on platforms such as UNIX where this is not the case executables in
  the current directory will only be found if the current directory is
  explicitly added to the path.

  If you need a portable 'which' on the command line in an environment that
  does not provide it, install App::pwhich which provides a command line
  interface to this API.


pkgId: fe94a83d204eb095a990cd8eb9088ee6f1670dc4c047973cdb71c04ab8aaf244
name: perl-File-chdir
arch: armv7l
version: 0.1011
epoch: 0
release: 0
summary: More sensible way to change directories
url: https://metacpan.org/release/File-chdir
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-File-chdir-0.1011-0.src.rpm
location_href: armv7l/perl-File-chdir-0.1011-0.armv7l.rpm
checksum_type: sha256
description:
  Perl's 'chdir()' has the unfortunate problem of being very, very, very
  global. If any part of your program calls 'chdir()' or if any library you
  use calls 'chdir()', it changes the current working directory for the
  *whole* program.

  This sucks.

  File::chdir gives you an alternative, '$CWD' and '@CWD'. These two
  variables combine all the power of 'chdir()', File::Spec and Cwd.


pkgId: e4b93444f9ece17a78dbb1d0aecc98a6abe75679c4df6f2cc790e97e7bcbc3d1
name: perl-JSON-PP
arch: armv7l
version: 4.16
epoch: 0
release: 1
summary: JSON::PP - JSON::XS compatible pure-Perl module.
url: https://metacpan.org/pod/JSON::PP
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-JSON-PP-4.16-1.src.rpm
location_href: armv7l/perl-JSON-PP-4.16-1.armv7l.rpm
checksum_type: sha256
description:
  JSON::PP is a pure perl JSON decoder/encoder, and (almost) compatible
  to much faster JSON::XS written by Marc Lehmann in C.
  JSON::PP works as a fallback module when you use JSON module
  without having installed JSON::XS.

  Because of this fallback feature of JSON.pm,
  JSON::PP tries not to be more JavaScript-friendly than JSON::XS
  (i.e. not to escape extra characters such as U+2028 and U+2029, etc),
  in order for you not to lose such JavaScript-friendliness silently
  when you use JSON.pm and install JSON::XS for speed or by accident.
  If you need JavaScript-friendly RFC7159-compliant pure perl module,
  try JSON::Tiny, which is derived from Mojolicious web framework and
  is also smaller and faster than JSON::PP.

  JSON::PP has been in the Perl core since Perl 5.14, mainly
  for CPAN toolchain modules to parse META.json.


pkgId: eaa6b3d8b4bb401800e3fd3f685a79db3ed299221321c49dcb871efdc9ba8d58
name: perl-MRO-Compat
arch: armv7l
version: 0.15
epoch: 0
release: 1
summary: Routines for manipulating stashes
url: https://metacpan.org/pod/MRO::Compat
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-MRO-Compat-0.15-1.src.rpm
location_href: armv7l/perl-MRO-Compat-0.15-1.armv7l.rpm
checksum_type: sha256
description:
  The "mro" namespace provides several utilities for dealing
  with method resolution order and method caching in general
  in Perl 5.9.5 and higher.
  This module provides those interfaces for earlier
  versions of Perl (back to 5.6.0 anyways).

  It is a harmless no-op to use this module on 5.9.5+.
  That is to say, code which properly uses MRO::Compat
  will work unmodified on both older Perls and 5.9.5+.

  If you're writing a piece of software that would like
  to use the parts of 5.9.5+'s mro:: interfaces that are
  supported here, and you want compatibility
  with older Perls, this is the module for you.

  Some parts of this code will work better and/or faster
  with Class::C3::XS installed (which is an optional
  prereq of Class::C3, which is in turn a prereq of
  this package), but it's not a requirement.

  This module never exports any functions.
  All calls must be fully qualified with the mro:: prefix.

  The interface documentation here serves only as a quick
  reference of what the function basically does, and what
  differences between MRO::Compat and 5.9.5+ one should look out for.
  The main docs in 5.9.5's mro are the real interface docs,
  and contain a lot of other useful information.


pkgId: e520a5b025e9f4f0254a006686f72d6ecc70247540b78ebe37180071a3a35085
name: perl-Module-Runtime
arch: armv7l
version: 0.016
epoch: 0
release: 1
summary: runtime module handling
url: https://metacpan.org/pod/Module::Runtime
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Module-Runtime-0.016-1.src.rpm
location_href: armv7l/perl-Module-Runtime-0.016-1.armv7l.rpm
checksum_type: sha256
description:
  The functions exported by this module deal with runtime handling of Perl modules,
  which are normally handled at compile time. This module avoids using any other modules,
  so that it can be used in low-level infrastructureb.

  The parts of this module that work with module names apply the same syntax
  that is used for barewords in Perl source. In principle this syntax can
  vary between versions of Perl, and this module applies the syntax of
  the Perl on which it is running. In practice the usable syntax hasn't changed yet.
  There's some intent for Unicode module names to be supported in the future,
  but this hasn't yet amounted to any consistent facility.

  The functions of this module whose purpose is to load modules include workarounds
  for three old Perl core bugs regarding require. These workarounds are applied on any Perl version
  where the bugs exist, except for a case where one of the bugs cannot be adequately worked around in pure Perl.


pkgId: 73272d5ef1cfa1409fb2d30a9c03370dbfc5c6e33e38ce0c34210592ef356238
name: perl-Net-DBus
arch: armv7l
version: 1.2.0
epoch: 0
release: 1
summary: Perl extension for the DBus message system
url: http://search.cpan.org/dist/Net-DBus/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Net-DBus-1.2.0-1.src.rpm
location_href: armv7l/perl-Net-DBus-1.2.0-1.armv7l.rpm
checksum_type: sha256
description:
  Net::DBus provides a Perl API for the DBus message system. The DBus Perl
  interface is currently operating against the 0.32 development version of
  DBus, but should work with later versions too, providing the API changes
  have not been too drastic.

  Users of this package are either typically, service providers in which case
  the the Net::DBus::Service manpage and the Net::DBus::Object manpage
  modules are of most relevance, or are client consumers, in which case the
  Net::DBus::RemoteService manpage and the Net::DBus::RemoteObject manpage
  are of most relevance.


pkgId: 137a8850f43f17109537db9cc03b550885a010ff6233b093aea43ef9fdda4e11
name: perl-Package-Stash
arch: armv7l
version: 0.40
epoch: 0
release: 1
summary: Routines for manipulating stashes
url: https://metacpan.org/pod/Package::Stash
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Package-Stash-0.40-1.src.rpm
location_href: armv7l/perl-Package-Stash-0.40-1.armv7l.rpm
checksum_type: sha256
description:
  Manipulating stashes (Perl's symbol tables) is occasionally
  necessary, but incredibly messy, and easy to get wrong.
  This module hides all of that behind a simple API.

  NOTE: Most methods in this class require a variable specification
  that includes a sigil. If this sigil is absent, it is assumed
  to represent the IO slot.

  Due to limitations in the typeglob API available to perl code,
  and to typeglob manipulation in perl being quite slow, this module
  provides two implementations - one in pure perl, and one using XS.
  The XS implementation is to be preferred for most usages; the pure
  perl one is provided for cases where XS modules are not a possibility.
  The current implementation in use can be set by setting
  $ENV{PACKAGE_STASH_IMPLEMENTATION} or $Package::Stash::IMPLEMENTATION
  before loading Package::Stash (with the environment variable
  taking precedence), otherwise, it will use the XS implementation
  if possible, falling back to the pure perl one.


pkgId: 1cf6d290b5ffc47fabe9c8119f7ee8b1a4c1f4e3b7fcc484abd2c6d7c13e423a
name: perl-Params-ValidationCompiler
arch: armv7l
version: 0.31
epoch: 0
release: 1
summary: Build an optimized subroutine parameter validator once, use it forever
url: https://metacpan.org/pod/Params::ValidationCompiler
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Params-ValidationCompiler-0.31-1.src.rpm
location_href: armv7l/perl-Params-ValidationCompiler-0.31-1.armv7l.rpm
checksum_type: sha256
description:
  This module creates a customized, highly efficient
  parameter checking subroutine. It can handle named
  or positional parameters, and can return the
  parameters as key/value pairs or a list of values.

  In addition to type checks, it also supports
  parameter defaults, optional parameters, and
  extra "slurpy" parameters.


pkgId: 2a6805bc7530f602ccfef1e44d38376c6a839cb3aa9a89695214f5fb54c58384
name: perl-Path-Tiny
arch: armv7l
version: 0.146
epoch: 0
release: 0
summary: File path utility
url: https://metacpan.org/release/Path-Tiny
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Path-Tiny-0.146-0.src.rpm
location_href: armv7l/perl-Path-Tiny-0.146-0.armv7l.rpm
checksum_type: sha256
description:
  This module provides a small, fast utility for working with file paths. It
  is friendlier to use than File::Spec and provides easy access to functions
  from several other core file handling modules. It aims to be smaller and
  faster than many alternatives on CPAN, while helping people do many common
  things in consistent and less error-prone ways.

  Path::Tiny does not try to work for anything except Unix-like and Win32
  platforms. Even then, it might break if you try something particularly
  obscure or tortuous. (Quick! What does this mean:
  '///../../..//./././a//b/.././c/././'? And how does it differ on Win32?)

  All paths are forced to have Unix-style forward slashes. Stringifying the
  object gives you back the path (after some clean up).

  File input/output methods 'flock' handles before reading or writing, as
  appropriate (if supported by the platform and/or filesystem).

  The '*_utf8' methods ('slurp_utf8', 'lines_utf8', etc.) operate in raw
  mode. On Windows, that means they will not have CRLF translation from the
  ':crlf' IO layer. Installing Unicode::UTF8 0.58 or later will speed up
  '*_utf8' situations in many cases and is highly recommended. Alternatively,
  installing PerlIO::utf8_strict 0.003 or later will be used in place of the
  default ':encoding(UTF-8)'.

  This module depends heavily on PerlIO layers for correct operation and thus
  requires Perl 5.008001 or later.


pkgId: b3686cc762ff1b830a75c3bc27f35808a70b79161d90cde945cda93afd33a38d
name: perl-Specio
arch: armv7l
version: 0.48
epoch: 0
release: 1
summary: Base class for type libraries
url: https://metacpan.org/pod/Specio::Exporter
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Specio-0.48-1.src.rpm
location_href: armv7l/perl-Specio-0.48-1.armv7l.rpm
checksum_type: sha256
description:
  Inheriting from this package makes your package a type exporter.
  By default, types defined in a package are never visible outside
  of the package. When you inherit from this package, all the types
  you define internally become available via exports.

  The exported types are available through the importing package's t subroutine.

  By default, types your package imports are not re-exported:

   package MyApp::Type::Library;

   use parent 'Specio::Exporter';

   use Specio::Declare;
   use Specio::Library::Builtins;

  In this case, the types provided by Specio::Library::Builtins are not
  exported to packages which use MyApp::Type::Library.

  You can explicitly ask for types to be re-exported:

    package MyApp::Type::Library;

    use parent 'Specio::Exporter';

    use Specio::Declare;
    use Specio::Library::Builtins -reexport;

  In this case, packages which use MyApp::Type::Library will get
  all the types from Specio::Library::Builtins as well as any
  types defined in MyApp::Type::Library.


pkgId: 85167c278c9776af506d30b382d49cf078297b56763a154401a5c80117ec5fb8
name: perl-Sub-Exporter-Progressive
arch: armv7l
version: 0.001013
epoch: 0
release: 1
summary: Only use Sub::Exporter if you need it
url: https://metacpan.org/pod/Sub::Exporter::Progressive
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Sub-Exporter-Progressive-0.001013-1.src.rpm
location_href: armv7l/perl-Sub-Exporter-Progressive-0.001013-1.armv7l.rpm
checksum_type: sha256
description:
  Sub::Exporter is an incredibly powerful module, but with that power
  comes great responsibility, er- as well as some runtime penalties.
  This module is a Sub::Exporter wrapper that will let your users just
  use Exporter if all they are doing is picking exports, but use Sub::Exporter
  if your users try to use Sub::Exporter's more advanced features,
  like renaming exports, if they try to use them.

  Note that this module will export @EXPORT, @EXPORT_OK and %EXPORT_TAGS
  package variables for Exporter to work. Additionally, if your package
  uses advanced Sub::Exporter features like currying, this module will
  only ever use Sub::Exporter, so you might as well use it directly.


pkgId: 97f11743e268b88167cf04d97cd6898a58a4b7e59d6f6466d4ef1beb97da0ee4
name: perl-Sub-Identify
arch: armv7l
version: 0.14
epoch: 0
release: 1
summary: Retrieve names of code references
url: https://metacpan.org/pod/Sub::Identify
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Sub-Identify-0.14-1.src.rpm
location_href: armv7l/perl-Sub-Identify-0.14-1.armv7l.rpm
checksum_type: sha256
description:
  Sub::Identify allows you to retrieve the real name of code references.
  It provides six functions, all of them taking a code reference.
  sub_name returns the name of the code reference passed as an argument
  (or __ANON__ if it's an anonymous code reference), stash_name
  returns its package, and sub_fullname returns the concatenation of the two.

  get_code_info
  returns a list of two elements, the package and the subroutine name
  (in case of you want both and are worried by the speed.)

  In case of subroutine aliasing, those functions always return the original name.
  get_code_location returns a two-element list containing the file name
  and the line number where the subroutine has been defined.

  is_sub_constant returns a boolean value indicating whether
  the subroutine is a constant or not.


pkgId: dcbfbf9a4fda14a639d11a29fd8b82a60a73e29cf1d871ef69f91688376b7ee8
name: perl-Switch
arch: noarch
version: 2.17
epoch: 0
release: 1
summary: A switch statement for Perl
url: http://search.cpan.org/dist/Switch/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Switch-2.17-1.src.rpm
location_href: noarch/perl-Switch-2.17-1.noarch.rpm
checksum_type: sha256
description:
  The Switch.pm module implements a generalized case mechanism that covers
  most (but not all) of the numerous possible combinations of switch and case
  values described above.

  The module augments the standard Perl syntax with two new control
  statements: 'switch' and 'case'. The 'switch' statement takes a single
  scalar argument of any type, specified in parentheses. 'switch' stores this
  value as the current switch value in a (localized) control variable. The
  value is followed by a block which may contain one or more Perl statements
  (including the 'case' statement described below). The block is
  unconditionally executed once the switch value has been cached.


pkgId: f9bc7b42d4de9e199a296aa8ed4ea346458baac8b81360eb6f60afb11b3321c0
name: perl-Term-Table
arch: armv7l
version: 0.023
epoch: 0
release: 0
summary: Format a header and rows into a table
url: https://metacpan.org/release/Term-Table
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Term-Table-0.023-0.src.rpm
location_href: armv7l/perl-Term-Table-0.023-0.armv7l.rpm
checksum_type: sha256
description:
  This is used by some failing tests to provide diagnostics about what has
  gone wrong. This module is able to format rows of data into tables.


pkgId: bc21e9f6bdec4a74ac411154218e647b32e1aa332d5abc9f8304abe42a71fbfb
name: perl-Test2-Suite
arch: armv7l
version: 0.000163
epoch: 0
release: 0
summary: Distribution with a rich set of tools built upon the Test2 framework
url: https://metacpan.org/release/Test2-Suite
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Test2-Suite-0.000163-0.src.rpm
location_href: armv7l/perl-Test2-Suite-0.000163-0.armv7l.rpm
checksum_type: sha256
description:
  Rich set of tools, plugins, bundles, etc built upon the Test2 testing
  library. If you are interested in writing tests, this is the distribution
  for you.


pkgId: ed4b7a928f646ec16c9d4897c195c8a685ffe8b3b7e8bd6f2fb1c62984e2ff66
name: perl-Try-Tiny
arch: armv7l
version: 0.32
epoch: 0
release: 1
summary: Minimal try/catch with proper preservation of $@
url: https://metacpan.org/pod/Try::Tiny
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Try-Tiny-0.32-1.src.rpm
location_href: armv7l/perl-Try-Tiny-0.32-1.armv7l.rpm
checksum_type: sha256
description:
  This module provides bare bones try/catch/finally statements that are
  designed to minimize common mistakes with eval blocks, and NOTHING else.

  This is unlike TryCatch which provides a nice syntax and avoids adding
  another call stack layer, and supports calling return from the try block
  to return from the parent subroutine. These extra features come
  at a cost of a few dependencies, namely Devel::Declare and Scope::Upper
  which are occasionally problematic, and the additional catch filtering
  uses Moose type constraints which may not be desirable either.

  The main focus of this module is to provide simple and reliable error
  handling for those having a hard time installing TryCatch, but who still
  want to write correct eval blocks without 5 lines of boilerplate each time.

  It's designed to work as correctly as possible in light of the various
  pathological edge cases (see "BACKGROUND") and to be compatible with
  any style of error values (simple strings, references, objects, overloaded
  objects, etc).

  If the try block dies, it returns the value of the last statement executed
  in the catch block, if there is one. Otherwise, it returns undef in scalar
  context or the empty list in list context. The following examples
  all assign "bar" to $x:

  my $x = try { die "foo" } catch { "bar" };
  my $x = try { die "foo" } || "bar";
  my $x = (try { die "foo" }) // "bar";

   my $x = eval { die "foo" } || "bar";
   You can add finally blocks, yielding the following:

   my $x;
   try { die 'foo' } finally { $x = 'bar' };
   try { die 'foo' } catch { warn "Got a die: $_" } finally { $x = 'bar' };

   finally blocks are always executed making them suitable for cleanup code
   which cannot be handled using local. You can add as many finally blocks
   to a given try block as you like.

   Note that adding a finally block without a preceding catch block suppresses
   any errors. This behaviour is consistent with using a standalone eval,
   but it is not consistent with try/finally patterns found in other programming
   languages, such as Java, Python, Javascript or C#. If you learned
   the try/finally pattern from one of these languages, watch out for this.


pkgId: 79ba72f8fb4f79c822a567f39d2e13a94a8f14bf7ff8cb9496a3f471c04a2f80
name: perl-Variable-Magic
arch: armv7l
version: 0.64
epoch: 0
release: 1
summary: Associate user-defined magic to variables from Perl.
url: https://metacpan.org/pod/Variable::Magic
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Variable-Magic-0.64-1.src.rpm
location_href: armv7l/perl-Variable-Magic-0.64-1.armv7l.rpm
checksum_type: sha256
description:
  Magic is Perl's way of enhancing variables. This mechanism
  lets the user add extra data to any variable and hook
  syntactical operations (such as access, assignment or destruction)
  that can be applied to it. With this module, you can add
  your own magic to any variable without having to write a single line of XS.

  You'll realize that these magic variables look a lot like tied variables.
  It is not surprising, as tied variables are implemented as a special
  kind of magic, just like any 'irregular' Perl variable : scalars like $!,
  $( or $^W, the %ENV and %SIG hashes, the @ISA array, vec() and substr()
  lvalues, threads::shared variables... They all share the same underlying
  C API, and this module gives you direct access to it.


pkgId: 789063fa6cf777f9dbc7efc9bc8320c3e17056ea787e7a5393c09ca7fff297f6
name: perl-XML-LibXML
arch: armv7l
version: 2.0210
epoch: 0
release: 0
summary: Perl Binding for libxml2
url: http://search.cpan.org/dist/XML-LibXML/
rpm_license: Artistic License ..
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-LibXML-2.0210-0.src.rpm
location_href: armv7l/perl-XML-LibXML-2.0210-0.armv7l.rpm
checksum_type: sha256
description:
  This module implements a Perl interface to the Gnome libxml2 library which
  provides interfaces for parsing and manipulating XML files. This module allows
  Perl programmers to make use of the highly capable validating XML parser and
  the high performance DOM implementation.

  Authors:
  	Matt Sergeant, Christian Glahn, Petr Pajas


pkgId: 77d18d6278dcf0d1953735d8a9d94e1e592edd6532a6f5e1ce640320a95a65c6
name: perl-XML-NamespaceSupport
arch: armv7l
version: 1.12
epoch: 0
release: 0
summary: Simple Generic Namespace Processor
url: http://search.cpan.org/dist/XML-NamespaceSupport/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-NamespaceSupport-1.12-0.src.rpm
location_href: armv7l/perl-XML-NamespaceSupport-1.12-0.armv7l.rpm
checksum_type: sha256
description:
  This module offers a simple to process namespaced XML names (unames) from
  within any application that may need them. It also helps maintain a prefix
  to namespace URI map, and provides a number of basic checks.

  The model for this module is SAX2's NamespaceSupport class, readable at
  http://www.saxproject.org/namespaces.html It adds a few perlisations where
  we thought it appropriate.


pkgId: 7cd5f18adeae50e2c26ca51f675224c12eec25f981d8999905ec9989046a51fb
name: perl-XML-SAX
arch: armv7l
version: 1.02
epoch: 0
release: 6
summary: XML::SAX Perl Module
url: http://www.cpan.org/modules/by-module/XML/
rpm_license: Artistic License ..
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-SAX-1.02-6.src.rpm
location_href: armv7l/perl-XML-SAX-1.02-6.armv7l.rpm
checksum_type: sha256
description:
  XML::SAX consists of several framework classes for using and building
  Perl SAX2 XML parsers, filters, and drivers. It is designed around the
  need to be able to "plug in" different SAX parsers to an application
  without requiring programmer intervention. Those of you familiar with
  the DBI will be right at home. Some of the designs come from the Java
  JAXP specification (SAX part), only without the javaness.


pkgId: ccec87bd736dcfbe913b470fa94d957982bae65b870f75a486fa8df7e1076b09
name: perl-XML-SAX-Base
arch: armv7l
version: 1.09
epoch: 0
release: 0
summary: Base class SAX Drivers and Filters
url: http://search.cpan.org/dist/XML-SAX-Base/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-SAX-Base-1.09-0.src.rpm
location_href: armv7l/perl-XML-SAX-Base-1.09-0.armv7l.rpm
checksum_type: sha256
description:
  This module has a very simple task - to be a base class for PerlSAX drivers
  and filters. It's default behaviour is to pass the input directly to the
  output unchanged. It can be useful to use this module as a base class so
  you don't have to, for example, implement the characters() callback.

  The main advantages that it provides are easy dispatching of events the
  right way (ie it takes care for you of checking that the handler has
  implemented that method, or has defined an AUTOLOAD), and the guarantee
  that filters will pass along events that they aren't implementing to
  handlers downstream that might nevertheless be interested in them.


pkgId: e2fcd17a4dc96e1399a6226586b66d87755347438b097597e966cdf65b81a747
name: perl-XML-Twig
arch: armv7l
version: 3.52
epoch: 0
release: 1
summary: Tree interface to XML documents
url: http://search.cpan.org/dist/XML::Twig
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-Twig-3.52-1.src.rpm
location_href: armv7l/perl-XML-Twig-3.52-1.armv7l.rpm
checksum_type: sha256
description:
  XML::Twig is (yet another!) XML transformation module.

  Its strong points: can be used to process huge documents while still
  being in tree mode; not bound by DOM or SAX, so it is very perlish and
  offers a very comprehensive set of methods; simple to use; DWIMs as
  much as possible

  What it doesn't offer: full SAX support (it can export SAX, but only
  reads XML), full XPath support (unless you use XML::Twig::XPath), nor
  DOM support.

  Other drawbacks: it is a big module, and with over 500 methods
  available it can be a bit overwhelming. A good starting point is the
  tutorial at http://xmltwig.com/xmltwig/tutorial/index.html. In fact the
  whole XML::Twig page at http://xmltwig.com/xmltwig/ has plenty of
  information to get you started with XML::Twig


pkgId: ed674e535c8a71415173ba1edd4d2a1570960245cac3c64f975d6eb9a9d66eb6
name: perl-YAML
arch: armv7l
version: 1.31
epoch: 0
release: 0
summary: YAML Ain't Markup Language (tm)
url: http://search.cpan.org/dist/YAML/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-YAML-1.31-0.src.rpm
location_href: armv7l/perl-YAML-1.31-0.armv7l.rpm
checksum_type: sha256
description:
  The YAML.pm module implements a YAML Loader and Dumper based on the YAML
  1.0 specification. the http://www.yaml.org/spec/ manpage

  YAML is a generic data serialization language that is optimized for human
  readability. It can be used to express the data structures of most modern
  programming languages. (Including Perl!!!)

  For information on the YAML syntax, please refer to the YAML specification.


pkgId: e75547a05a284a6a6d492848d00a7e81f6d9131f1d26ab89c667808e07ca8e90
name: perl-namespace-autoclean
arch: armv7l
version: 0.31
epoch: 0
release: 1
summary: Keep imports out of your namespace
url: https://metacpan.org/pod/namespace::autoclean
rpm_license: perl_5
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-namespace-autoclean-0.31-1.src.rpm
location_href: armv7l/perl-namespace-autoclean-0.31-1.armv7l.rpm
checksum_type: sha256
description:
  When you import a function into a Perl package, it will naturally also be available as a method.
  The namespace::autoclean pragma will remove all imported symbols at the end of the current package's
  compile cycle. Functions called in the package itself will still be bound by their name,
  but they won't show up as methods on your class or instances.
  This module is very similar to namespace::clean, except it will clean all imported functions,
  no matter if you imported them before or after you used the pragma.
  It will also not touch anything that looks like a method.
  If you're writing an exporter and you want to clean up after yourself (and your peers),
  you can use the -cleanee switch to specify what package to clean:

  package My::MooseX::namespace::autoclean;
  use strict;

  use namespace::autoclean (); # no cleanup, just load

  sub import {
      namespace::autoclean->import(
        -cleanee => scalar(caller),
      );
  }


pkgId: d5dbfddc2bac791048d0d073a5443855777df5c2d27300490fefec64e18307e0
name: perl-namespace-clean
arch: armv7l
version: 0.27
epoch: 0
release: 1
summary: Keep imports and functions out of your namespace
url: https://metacpan.org/pod/namespace::clean
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-namespace-clean-0.27-1.src.rpm
location_href: armv7l/perl-namespace-clean-0.27-1.armv7l.rpm
checksum_type: sha256
description:
  Keeping packages clean
  When you define a function, or import one, into a Perl package,
  it will naturally also be available as a method. This does not
  per se cause problems, but it can complicate subclassing and,
  for example, plugin classes that are included via multiple
  inheritance by loading them as base classes.

  The namespace::clean pragma will remove all previously declared
  or imported symbols at the end of the current package's compile cycle.
  Functions called in the package itself will still be bound by their name,
  but they won't show up as methods on your class or instances.

  By unimporting via no you can tell namespace::clean to start
  collecting functions for the next use namespace::clean; specification.

  You can use the -except flag to tell namespace::clean that you don't
  want it to remove a certain function or method. A common use would be
  a module exporting an import method along with some functions:


pkgId: c518c857dac71cfd979a794ccf5dcf9d62ddf231a1dfda1863231c7e2008c280
name: prelink
arch: armv7l
version: 20130503
epoch: 0
release: 0
summary: An ELF Prelinking Utility
url: http://people.redhat.com/jakub/prelink/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: prelink-20130503-0.src.rpm
location_href: armv7l/prelink-20130503-0.armv7l.rpm
checksum_type: sha256
description:
  The prelink program is a utility that modifies shared libraries and
  executables in the ELF format so that far less relocations need to be
  resolved at run time.  This decreases program start-up time.

  Be aware that prelink can modify all libraries and executables on your
  system. Applications which monitor changes in files or RPM itself
  will no longer work.


pkgId: 0005c32a0f8e955cc5a93c8c96282177906e277cedf4927d59032d61d9f5ccc0
name: privilege-verifier
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: Privilege Verification Utility
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.3.1-0.src.rpm
location_href: armv7l/privilege-verifier-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Verifier Utility provides functions to verify privilege information of packages to be installed.


pkgId: c71aa9fe1cd032d2dd894c4830782165ac7c7770ad224e8d4aaf1d9d3179fd6a
name: protobuf
arch: armv7l
version: 25.0.0
epoch: 0
release: 1
summary: Protocol Buffers - Google's data interchange format
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-25.0.0-1.src.rpm
location_href: armv7l/protobuf-25.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  Protocol Buffers are a way of encoding structured data in an efficient
  yet extensible format. Google uses Protocol Buffers for almost all of
  its internal RPC protocols and file formats.

  Protocol buffers are a flexible, efficient, automated mechanism for
  serializing structured data – think XML, but smaller, faster, and
  simpler. You define how you want your data to be structured once, then
  you can use special generated source code to easily write and read
  your structured data to and from a variety of data streams and using a
  variety of languages. You can even update your data structure without
  breaking deployed programs that are compiled against the "old" format.


pkgId: a86f201148f8d75135438cdc2479f112b5759459daba6d5155197067f4e09e82
name: protobuf-lite
arch: armv7l
version: 25.0.0
epoch: 0
release: 1
summary: Protocol Buffers LITE_RUNTIME libraries
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-25.0.0-1.src.rpm
location_href: armv7l/protobuf-lite-25.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  Protocol Buffers built with optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 81e5538579e4b63641ebc2f133ca5580e5d6ced9557023e2a0b1e815280acd6a
name: protobuf-lite-devel
arch: armv7l
version: 25.0.0
epoch: 0
release: 1
summary: Protocol Buffers LITE_RUNTIME development libraries
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-25.0.0-1.src.rpm
location_href: armv7l/protobuf-lite-devel-25.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  This package contains development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 44ac3f376395c13d4d3e76262015fe723b45056c4ca702c54a785d785f7ca1a4
name: protobuf-lite-static
arch: armv7l
version: 25.0.0
epoch: 0
release: 1
summary: Static development files for protobuf-lite
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-25.0.0-1.src.rpm
location_href: armv7l/protobuf-lite-static-25.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  This package contains static development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 34041c92cac24f8b41821e537410b401d184c88db1bcbb09d93582970babb422
name: psmisc
arch: armv7l
version: 23.6
epoch: 0
release: 1
summary: Utilities for managing processes on your system
url: http://sourceforge.net/projects/psmisc/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: psmisc-23.6-1.src.rpm
location_href: armv7l/psmisc-23.6-1.armv7l.rpm
checksum_type: sha256
description:
  The psmisc package contains utilities for managing processes on your
  system: pstree, killall and fuser.  The pstree command displays a tree
  structure of all of the running processes on your system.  The killall
  command sends a specified signal (SIGTERM if nothing is specified) to
  processes identified by name.  The fuser command identifies the PIDs of
  processes that are using specified files or filesystems.


pkgId: e33e8d8df529a6829d3b5bd4280dc1aa785660ab3f40471e95d2327ff775513c
name: pulseaudio
arch: armv7l
version: 15.0
epoch: 0
release: 36
summary: Improved Linux sound server
url: http://pulseaudio.org
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Audio
rpm_sourcerpm: pulseaudio-15.0-36.src.rpm
location_href: armv7l/pulseaudio-15.0-36.armv7l.rpm
checksum_type: sha256
description:
  PulseAudio is a sound server for Linux and other Unix like operating
  systems. It is intended to be an improved drop-in replacement for the
  Enlightened Sound Daemon (ESOUND).


pkgId: 92a83f08ceec02498195347262c7c81151b6db76ce288d0936d1039abc095429
name: pulseaudio-utils
arch: armv7l
version: 15.0
epoch: 0
release: 36
summary: Command line tools for the PulseAudio sound server
url: http://pulseaudio.org
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Audio
rpm_sourcerpm: pulseaudio-15.0-36.src.rpm
location_href: armv7l/pulseaudio-utils-15.0-36.armv7l.rpm
checksum_type: sha256
description:
  These tools provide command line access to various features of the
  PulseAudio sound server. Included tools are:
  pabrowse - Browse available PulseAudio servers on the local network.
  paplay - Playback a WAV file via a PulseAudio sink.
  pacat - Cat raw audio data to a PulseAudio sink.
  parec - Cat raw audio data from a PulseAudio source.
  pacmd - Connect to PulseAudio's built-in command line control interface.
  pactl - Send a control command to a PulseAudio server.
  padsp - /dev/dsp wrapper to transparently support OSS applications.
  pax11publish - Store/retrieve PulseAudio default server/sink/source
  settings in the X11 root window.


pkgId: 7dffde180af4a8f742f6ef4ab6442e08d40d7853465b652a7173260d4e341240
name: pygobject
arch: armv7l
version: 3.46.0
epoch: 0
release: 1.1
summary: Python bindings for GObject
url: http://www.pygtk.org/
rpm_license: LGPLv2+
rpm_vendor: tizen
rpm_group: Development/Languages
rpm_sourcerpm: pygobject-3.46.0-1.1.src.rpm
location_href: armv7l/pygobject-3.46.0-1.1.armv7l.rpm
checksum_type: sha256
description:
  The pygobject package provides a convenient wrapper for the GObject library
  for use in Python programs.


pkgId: 3e76559c14516f5b80a663a22b971148f932aba1daa4d81b01a06c6370ac7707
name: pygobject-devel
arch: armv7l
version: 3.46.0
epoch: 0
release: 1.1
summary: Development files for building add-on libraries
url: http://www.pygtk.org/
rpm_license: LGPLv2+
rpm_vendor: tizen
rpm_group: Development/Languages
rpm_sourcerpm: pygobject-3.46.0-1.1.src.rpm
location_href: armv7l/pygobject-devel-3.46.0-1.1.armv7l.rpm
checksum_type: sha256
description:
  This package contains files required to build wrappers for pygobject-based
  libraries such as pygtk2.


pkgId: c0c37fddac7aad53d7684f1e21c14bc60acb2b11239e5ca6e00381cf02bf1540
name: python-Cheetah
arch: armv7l
version: 2.4.4
epoch: 0
release: 0
summary: Cheetah is a template engine and code generation tool
url: http://www.cheetahtemplate.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-Cheetah-2.4.4-0.src.rpm
location_href: armv7l/python-Cheetah-2.4.4-0.armv7l.rpm
checksum_type: sha256
description:
  Cheetah is an open source template engine and code generation tool.

  It can be used standalone or combined with other tools and frameworks. Web
  development is its principle use, but Cheetah is very flexible and is also being
  used to generate C++ game code, Java, sql, form emails and even Python code.


pkgId: e0b0579643630b0eee1bcc772e9d05c9a843fd339cd50af71c3ad6e89df057da
name: python-M2Crypto
arch: armv7l
version: 0.35.1.1
epoch: 0
release: 0
summary: Crypto and SSL toolkit for Python
url: http://chandlerproject.org/bin/view/Projects/MeTooCrypto
rpm_license: MIT and ZPL-2.0 and BSD-3-Clause
rpm_vendor: tizen
rpm_group: Platfrom Development/Python
rpm_sourcerpm: python-M2Crypto-0.35.1.1-0.src.rpm
location_href: armv7l/python-M2Crypto-0.35.1.1-0.armv7l.rpm
checksum_type: sha256
description:
  M2Crypto is a crypto and SSL toolkit for Python featuring the
  following:

  RSA, DSA, DH, HMACs, message digests, symmetric ciphers (including
  AES). SSL functionality to implement clients and servers. HTTPS
  extensions to Python's httplib, urllib, and xmlrpclib. Unforgeable
  HMAC'ing AuthCookies for web session management. FTP/TLS client and
  server. S/MIME. ZServerSSL: A HTTPS server for Zope. ZSmime: An S/MIME
  messenger for Zope.

  It currently lives at
  http://wiki.osafoundation.org/bin/view/Projects/MeTooCrypto. The
  original M2Crypto homepage is at http://sandbox.rulemaker.net/ngps/m2/.


pkgId: e909f008fd3d4342e8342720d7b64540d8c457fd0a7771bdb0a0730ee33b3f3f
name: python-PyYAML
arch: armv7l
version: 3.10
epoch: 0
release: 0
summary: YAML parser and emitter for Python
url: http://pyyaml.org/wiki/PyYAML
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-PyYAML-3.10-0.src.rpm
location_href: armv7l/python-PyYAML-3.10-0.armv7l.rpm
checksum_type: sha256
description:
  YAML is a data serialization format designed for human readability
  and interaction with scripting languages.  PyYAML is a YAML parser
  and emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: 5e7b14ba43f60bca5457161ac8a1a2a4d4044ba95cc339816433482ce649627a
name: python-ZSI
arch: noarch
version: 2.1.a1
epoch: 0
release: 0
summary: Zolera SOAP Infrastructure
url: http://pywebsvcs.sf.net
rpm_license: Python
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-ZSI-2.1.a1-0.src.rpm
location_href: noarch/python-ZSI-2.1.a1-0.noarch.rpm
checksum_type: sha256
description:
  ZSI, the Zolera SOAP Infrastructure, is a pure-Python module that
  provides an implementation of SOAP messaging, as described in SOAP 1.1
  Specification (see http://www.w3.org/TR/soap).  It can also be used to
  build applications using SOAP Messages with Attachments (see
  http://www.w3.org/TR/SOAP-attachments).  ZSI is intended to make it
  easier to write web services in Python.

  In particular, ZSI parses and generates SOAP messages, and converts
  between native Python datatypes and SOAP syntax. Simple dispatch and
  invocation methods are supported.  There are no known bugs.  Its only
  known limitation is that it cannot handle multi-dimensional arrays.


pkgId: 8cbe58e1e6f1e22462eb6bd61f88d313dbd225e53b39b89762caa552aca418dc
name: python-coverage
arch: armv7l
version: 3.6
epoch: 0
release: 0
summary: Code coverage measurement for Python
url: http://nedbatchelder.com/code/coverage
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-coverage-3.6-0.src.rpm
location_href: armv7l/python-coverage-3.6-0.armv7l.rpm
checksum_type: sha256
description:
  Coverage.py measures code coverage, typically during test execution. It uses
  the code analysis tools and tracing hooks provided in the Python standard
  library to determine which lines are executable, and which have been executed.


pkgId: a7013b967e6b1a7e9e879bbe3ae007dacf9132278697f9a89b7b34a90f4753d7
name: python-cython
arch: armv7l
version: 0.29.21
epoch: 0
release: 0
summary: The Cython compiler for writing C extensions for the Python language
url: http://www.cython.org
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-cython-0.29.21-0.src.rpm
location_href: armv7l/python-cython-0.29.21-0.armv7l.rpm
checksum_type: sha256
description:
  The Cython language makes writing C extensions for the Python language as
  easy as Python itself.  Cython is a source code translator based on the
  well-known Pyrex, but supports more cutting edge functionality and
  optimizations.

  The Cython language is very close to the Python language (and most Python
  code is also valid Cython code), but Cython additionally supports calling C
  functions and declaring C types on variables and class attributes. This
  allows the compiler to generate very efficient C code from Cython code.

  This makes Cython the ideal language for writing glue code for external C
  libraries, and for fast C modules that speed up the execution of Python
  code.


pkgId: daeb874bd4d9679e3800976b3b6841fa74cc7b0c90d35f75c95fbec99277c7ce
name: python-distribute
arch: noarch
version: 0.6.32
epoch: 0
release: 0
summary: Easily download, build, install, upgrade, and uninstall Python packages
url: http://packages.python.org/distribute
rpm_license: Python-2.0 or ZPL-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-distribute-0.6.32-0.src.rpm
location_href: noarch/python-distribute-0.6.32-0.noarch.rpm
checksum_type: sha256
description:
  Distribute is a fork of the Setuptools project.

  Distribute is intended to replace Setuptools as the standard method for working
  with Python module distributions.


pkgId: 2d04d7267325cda77d20316de68dffbdfd0d148e92dcb1317c81d2046ec41baf
name: python-gobject-cairo
arch: armv7l
version: 3.36.1
epoch: 0
release: 0
summary: Python bindings for GObject -- Cairo bindings
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-gobject-3.36.1-0.src.rpm
location_href: armv7l/python-gobject-cairo-3.36.1-0.armv7l.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python that gives you access to
  GLib's GObjects.

  This package contains the Python Cairo bindings for GObject.


pkgId: 75ca33402480ffe08e36039fa343a8f701cdcca0f4863ed73b1f6f18a88a2f5e
name: python-gobject-pygtkcompat
arch: armv7l
version: 3.36.1
epoch: 0
release: 0
summary: Python bindings for GObject -- PyGTK Backwards Compatibility
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-gobject-3.36.1-0.src.rpm
location_href: armv7l/python-gobject-pygtkcompat-3.36.1-0.armv7l.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python that gives you access to
  GLib's GObjects.

  This package contains a module providing backwards compatibility to
  pygtk.


pkgId: 5ed621942377c76043de5754a0ad3c8445845aa33f09af3479ca10255f30de8c
name: python-gpgme
arch: armv7l
version: 0.1
epoch: 0
release: 0
summary: A Python module for working with OpenPGP messages
url: http://pypi.python.org/pypi/pygpgme
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-gpgme-0.1-0.src.rpm
location_href: armv7l/python-gpgme-0.1-0.armv7l.rpm
checksum_type: sha256
description:
  PyGPGME is a Python module that lets you sign, verify, encrypt and
  decrypt messages using the OpenPGP format.

  It is built on top of the GNU Privacy Guard and the GPGME library.


pkgId: 446dd0e8146cf555351e32bd9fc0e032e8e82cd75aeac9408eb61d8b7accf321
name: python-iniparse
arch: noarch
version: 0.4
epoch: 0
release: 0
summary: Python Module for Accessing and Modifying Configuration Data in INI files
url: http://code.google.com/p/iniparse/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-iniparse-0.4-0.src.rpm
location_href: noarch/python-iniparse-0.4-0.noarch.rpm
checksum_type: sha256
description:
  iniparse is an INI parser for Python which is API compatible with the
  standard library's ConfigParser, preserves structure of INI files
  (order of sections & options, indentation, comments, and blank lines
  are preserved when data is updated), and is more convenient to use.


pkgId: a4d36177db0de17cc26c366e517e09b074e21a6b58316fb71ebb270c257549a7
name: python-numpy
arch: armv7l
version: 1.16.6
epoch: 0
release: 0
summary: NumPy array processing for numbers, strings, records and objects
url: http://www.numpy.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/Python
rpm_sourcerpm: python-numpy-1.16.6-0.src.rpm
location_href: armv7l/python-numpy-1.16.6-0.armv7l.rpm
checksum_type: sha256
description:
  NumPy is a general-purpose array-processing package designed to
  efficiently manipulate large multi-dimensional arrays of arbitrary
  records without sacrificing too much speed for small multi-dimensional
  arrays.  NumPy is built on the Numeric code base and adds features
  introduced by numarray as well as an extended C-API and the ability to
  create arrays of arbitrary type which also makes NumPy suitable for
  interfacing with general-purpose data-base applications.

  There are also basic facilities for discrete fourier transform,
  basic linear algebra and random number generation.


pkgId: 0101207f0334b3275802e7443d672ea61aaeb225d42b8a39c3f7703f66caa90f
name: python-pyOpenSSL
arch: noarch
version: 19.0.0.0
epoch: 0
release: 0
summary: Python wrapper module around the OpenSSL library
url: https://github.com/pyca/pyopenssl
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-pyOpenSSL-19.0.0.0-0.src.rpm
location_href: noarch/python-pyOpenSSL-19.0.0.0-0.noarch.rpm
checksum_type: sha256
description:
  High-level wrapper around a subset of the OpenSSL library, includes
   * SSL.Connection objects, wrapping the methods of Python's portable
     sockets
   * Callbacks written in Python
   * Extensive error-handling mechanism, mirroring OpenSSL's error codes
  ...  and much more ;)


pkgId: 4faf0128e11b3e8930cd56f6a8d562dab0932be304e2784a0cb96ca59bcf637f
name: python-pycrypto
arch: armv7l
version: 2.6.1
epoch: 0
release: 0
summary: Cryptographic modules for Python
url: http://www.pycrypto.org/
rpm_license: Public Domain
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-pycrypto-2.6.1-0.src.rpm
location_href: armv7l/python-pycrypto-2.6.1-0.armv7l.rpm
checksum_type: sha256
description:
  The package contains:

    * Hash functions: MD2, MD4, RIPEMD, SHA256.
    * Block encryption algorithms: AES, ARC2, Blowfish, CAST, DES,
      Triple-DES, IDEA, RC5.
    * Stream encryption algorithms: ARC4, simple XOR.
    * Public-key algorithms: RSA, DSA, ElGamal, qNEW.
    * Protocols: All-or-nothing transforms, chaffing/winnowing.
    * Miscellaneous: RFC1751 module for converting 128-key keys into a
      set of English words, primality testing.
    * Some demo programs (currently all quite old and outdated).


pkgId: d099404ba7404839c34671991068d6e98ff3d0973f7b13de8392f2625247b6f5
name: python-pycurl
arch: armv7l
version: 7.19.0
epoch: 0
release: 0
summary: A Python interface to libcurl
url: http://pycurl.sourceforge.net/
rpm_license: LGPL-2.1+ or MIT/X11
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-pycurl-7.19.0-0.src.rpm
location_href: armv7l/python-pycurl-7.19.0-0.armv7l.rpm
checksum_type: sha256
description:
  PycURL is a Python interface to libcurl. PycURL can be used to fetch
  objects identified by a URL from a Python program, similar to the
  urllib Python module. PycURL is mature, very fast, and supports a lot
  of features.


pkgId: a794082c62975f3c64d7f72bf6fc48cf3b1e26aa69727445c6e4346f88915bb8
name: python-sqlite
arch: armv7l
version: 2.6.3
epoch: 0
release: 0
summary: DB-API 2.0 interface for SQLite 3.x
url: http://pysqlite.googlecode.com/
rpm_license: Zlib
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-sqlite-2.6.3-0.src.rpm
location_href: armv7l/python-sqlite-2.6.3-0.armv7l.rpm
checksum_type: sha256
description:
  Python interface to SQLite 3

  pysqlite is an interface to the SQLite 3.x embedded relational database engine.
  It is almost fully compliant with the Python database API version 2.0 also
  exposes the unique features of SQLite.


pkgId: 72d07bfebe62b60710292f76dd6e2dc445226f116f15358ec31987e2ef27a7a0
name: python-urlgrabber
arch: noarch
version: 3.9.1
epoch: 0
release: 0
summary: A high-level cross-protocol url-grabber
url: http://urlgrabber.baseurl.org/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-urlgrabber-3.9.1-0.src.rpm
location_href: noarch/python-urlgrabber-3.9.1-0.noarch.rpm
checksum_type: sha256
description:
  A high-level cross-protocol url-grabber for python supporting HTTP, FTP
  and file locations.  Features include keepalive, byte ranges, throttling,
  authentication, proxies and more.


pkgId: c6a28aa18bfd20ab6d43eed6641cab7cc6db8ee643c36e6a56dee51565f5b5da
name: python3-Cheetah
arch: armv7l
version: 3.3.3b1
epoch: 0
release: 0
summary: Cheetah is a template engine and code generation tool
url: http://www.cheetahtemplate.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python3
rpm_sourcerpm: python3-Cheetah-3.3.3b1-0.src.rpm
location_href: armv7l/python3-Cheetah-3.3.3b1-0.armv7l.rpm
checksum_type: sha256
description:
  Cheetah is an open source template engine and code generation tool.

  It can be used standalone or combined with other tools and frameworks. Web
  development is its principle use, but Cheetah is very flexible and is also being
  used to generate C++ game code, Java, sql, form emails and even Python3 code.


pkgId: d0a5f445ac97fb8fc1491b09a527a1c8f6ac8c04d0a8b04b5cf398bf1932d60d
name: python3-PyYAML
arch: armv7l
version: 3.10
epoch: 0
release: 0
summary: YAML parser and emitter for Python3
url: http://pyyaml.org/wiki/PyYAML
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-PyYAML-3.10-0.src.rpm
location_href: armv7l/python3-PyYAML-3.10-0.armv7l.rpm
checksum_type: sha256
description:
  PyYAML for Python3

  YAML is a data serialization format designed for human readability
  and interaction with scripting languages.  PyYAML is a YAML parser
  and emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: 70f3c6fff7fa2bf54387010fe8d421fbea206e492e3aa216ebc8ce00958a6023
name: python3-asn1crypto
arch: armv7l
version: 0.24.0
epoch: 0
release: 0
summary: python3-asn1crypto
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Testing
rpm_sourcerpm: python3-asn1crypto-0.24.0-0.src.rpm
location_href: armv7l/python3-asn1crypto-0.24.0-0.armv7l.rpm
checksum_type: sha256
description:
  ASN.1 parser and serializer with definitions for private keys, public keys,
  certificates, CRL, OCSP, CMS, PKCS#3, PKCS#7, PKCS#8, PKCS#12, PKCS#5, X509 and TSP


pkgId: 553d4d1ef502875475ee12e6f1508c587eb75046a4b70f119918fc9c4b943039
name: python3-atomicwrites
arch: armv7l
version: 1.2.1
epoch: 0
release: 0
summary: Atomic file writes for Python
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-atomicwrites-1.2.1-0.src.rpm
location_href: armv7l/python3-atomicwrites-1.2.1-0.armv7l.rpm
checksum_type: sha256
description:
  Atomic file writes for python3.
  Features that distinguish it from other similar libraries:

  - Race-free assertion that the target file doesn't yet exist. This can be
    controlled with the 'overwrite' parameter.

  - High-level API that wraps a very flexible class-based API


pkgId: 13687122f33b97e279461862cb28d5e60f7145937f3eb11c30cb360476213a2d
name: python3-catkin-pkg
arch: noarch
version: 0.4.23
epoch: 0
release: 1
summary: catkin package library
rpm_license: BSD
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-catkin-pkg-0.4.23-1.src.rpm
location_href: noarch/python3-catkin-pkg-0.4.23-1.noarch.rpm
checksum_type: sha256
description:
  The pytest framework makes it easy to write small tests, yet scales to support complex functional testing for applications and libraries.


pkgId: 397875e478f32f78409136df4829ef463645a2097c1701a23a9b5fc4221ed37e
name: python3-cffi
arch: armv7l
version: 1.14.5
epoch: 0
release: 0
summary: Foreign Function Interface for Python calling C code
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-cffi-1.14.5-0.src.rpm
location_href: armv7l/python3-cffi-1.14.5-0.armv7l.rpm
checksum_type: sha256
description:
  Foreign Function Interface for Python calling C code. The aim of this project
  is to provide a convenient and reliable way of calling C code from Python.


pkgId: 6814e6c31eaebaf62742f0164e4921f983f2661d855eaf857d7b94dadd6b726e
name: python3-cryptography
arch: armv7l
version: 2.3
epoch: 0
release: 0
summary: PyCA's cryptography library
rpm_license: Apache-2.0 or BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-cryptography-2.3-0.src.rpm
location_href: armv7l/python3-cryptography-2.3-0.armv7l.rpm
checksum_type: sha256
description:
  cryptography is a package designed to expose cryptographic primitives and
  recipes to Python developers.


pkgId: eee7315055b2771d11f2db088bd7ac3430d212ef602a3e7bc06ece8f53da95cf
name: python3-distlib
arch: noarch
version: 0.3.1
epoch: 0
release: 1
summary: packaging and distribution of Python software
rpm_license: Python-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-distlib-0.3.1-1.src.rpm
location_href: noarch/python3-distlib-0.3.1-1.noarch.rpm
checksum_type: sha256
description:
  Distlib is a library which implements low-level functions that relate to packaging and distribution of Python software.


pkgId: 69333ae19962de809f78c01a21cbe9e762dd832acf028e98b6bae71d9d9503a9
name: python3-empy
arch: noarch
version: 3.3.2
epoch: 0
release: 0
summary: A powerful and robust template system for Python
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Languages
rpm_sourcerpm: python3-empy-3.3.2-0.src.rpm
location_href: noarch/python3-empy-3.3.2-0.noarch.rpm
checksum_type: sha256
description:
  EmPy is a system for embedding Python expressions and statements in template
  text; it takes an EmPy source file, processes it, and produces output.


pkgId: ed8f67a472c44ccd09d4d6c78c0d845b30daea15f5ad60a526de03ce46083b2f
name: python3-gobject-cairo
arch: armv7l
version: 3.46.0
epoch: 0
release: 0
summary: Python3 bindings for GObject -- Cairo bindings
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-gobject-3.46.0-0.src.rpm
location_href: armv7l/python3-gobject-cairo-3.46.0-0.armv7l.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python3 that gives you access to
  GLib's GObjects.

  This package contains the Python3 Cairo bindings for GObject.


pkgId: 921e8ee575847cc4b90eca7094a6a11a67e6e0d2b8950347fd644a1020eda1a2
name: python3-gobject-pygtkcompat
arch: armv7l
version: 3.46.0
epoch: 0
release: 0
summary: Python3 bindings for GObject -- PyGTK Backwards Compatibility
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-gobject-3.46.0-0.src.rpm
location_href: armv7l/python3-gobject-pygtkcompat-3.46.0-0.armv7l.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python3 that gives you access to
  GLib's GObjects.

  This package contains a module providing backwards compatibility to
  pygtk.


pkgId: 0f7f35bc32e90259609351b0331711eed830e34ab6a3ea7df0c57e4925338036
name: python3-grpcio
arch: armv7l
version: 1.70.0
epoch: 0
release: 0
summary: HTTP/2-based Remote Procedure Call implementation
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-grpcio-1.70.0-0.src.rpm
location_href: armv7l/python3-grpcio-1.70.0-0.armv7l.rpm
checksum_type: sha256
description:
  gRPC is a remote procedure call (RPC) framework. gRPC enables client
  and server applications to communicate, and enables the building of
  connected systems.


pkgId: 27639033380bfeffd2a9c8de71b6732446c2e74e4e2f685ddec0ee0843086949
name: python3-idna
arch: noarch
version: 2.7
epoch: 0
release: 0
summary: Internationalized Domain Names in Applications (IDNA)
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-idna-2.7-0.src.rpm
location_href: noarch/python3-idna-2.7-0.noarch.rpm
checksum_type: sha256
description:
  A library to support the Internationalised Domain Names in
  Applications (IDNA) protocol as specified in RFC 5891
  http://tools.ietf.org/html/rfc5891. This version of the protocol
  is often referred to as \A1\B0IDNA2008\A1\B1 and can produce different
  results from the earlier standard from 2003.

  The library is also intended to act as a suitable drop-in replacement
  for the \A1\B0encodings.idna\A1\B1 module that comes with the Python standard
  library but currently only supports the older 2003 specification.


pkgId: f209065cdc5b39393017fa00243428c0b2347d7b036d258a01bc31c89cd00d94
name: python3-iso8601
arch: noarch
version: 0.1.12
epoch: 0
release: 0
summary: Simple module to parse ISO 8601 dates
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-iso8601-0.1.12-0.src.rpm
location_href: noarch/python3-iso8601-0.1.12-0.noarch.rpm
checksum_type: sha256
description:
  Simple module to parse ISO 8601 dates

  This module parses the most common forms of ISO 8601 date strings (e.g.
  2007-01-14T20:34:22+00:00) into datetime objects.


pkgId: cf13624e02c7b3115536db90ffda04288446e522025595b0de1c621a3491304a
name: python3-jinja2
arch: noarch
version: 3.1.3
epoch: 0
release: 1
summary: A syntax highlighting engine written in Python3
url: https://jinja.palletsprojects.com/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-jinja2-3.1.3-1.src.rpm
location_href: noarch/python3-jinja2-3.1.3-1.noarch.rpm
checksum_type: sha256
description:
  Jinja is a fast, expressive, extensible templating engine. Special
  placeholders in the template allow writing code similar to Python
  syntax. Then the template is passed data to render the final document.


pkgId: 46569d8772b27a1cbe685a87212dd80a2c4bee27f9f19d3c4cf3a0ba2850e670
name: python3-more-itertools
arch: noarch
version: 5.0.0
epoch: 0
release: 0
summary: More routines for operating on iterables, beyond itertools
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-more-itertools-5.0.0-0.src.rpm
location_href: noarch/python3-more-itertools-5.0.0-0.noarch.rpm
checksum_type: sha256
description:
  I love itertools; it's one of the most beautiful, composable standard libs.
  Whenever I have an iteration problem, there's almost always an itertools
  routine that fits it perfectly. Sometimes, however, neither itertools nor the
  recipes included in its docs do quite what I need.

  Here I've collected several routines I've reached for but not found. Since
  they are deceptively tricky to get right, I've wrapped them up into a library.
  We've also included implementations of the recipes from the itertools
  documentation. Enjoy! Any additions are welcome; just file a pull request.


pkgId: 5cfdc57b286cf80ceff82784aaade7ac95da0af07e0c0bade4ad8f6134b9ebad
name: python3-netifaces
arch: armv7l
version: 0.10.5
epoch: 0
release: 0
summary: Portable network interface information
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-netifaces-0.10.5-0.src.rpm
location_href: armv7l/python3-netifaces-0.10.5-0.armv7l.rpm
checksum_type: sha256
description:
  netifaces provides a (hopefully portable-ish) way for Python programmers to
  get access to a list of the network interfaces on the local machine, and to
  obtain the addresses of those network interfaces.

  The package has been tested on Mac OS X, Windows XP, Windows Vista, Linux and
  Solaris. On Windows, it is currently not able to retrieve IPv6 addresses,
  owing to shortcomings of the Windows API.

  It should work on other UNIX-like systems provided they implement either
  getifaddrs() or support the SIOCGIFxxx socket options, although the data
  provided by the socket options is normally less complete.


pkgId: 3c8c3e913bef64378bdf36cd2a083d6c0390cc182c1eab5c712c6c01928ff239
name: python3-opencv
arch: armv7l
version: 4.7.0
epoch: 0
release: 7
summary: OpenCV Python3 Library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: opencv-4.7.0-7.src.rpm
location_href: armv7l/python3-opencv-4.7.0-7.armv7l.rpm
checksum_type: sha256
description:
  The Open Computer Vision Library (Python3) includes various algorithms for computre vision problems.


pkgId: ebb084e593adba3ef7e5fd0a0b7c9021c7458711a291ed61ce3273bcb2245229
name: python3-pycparser
arch: armv7l
version: 2.18
epoch: 0
release: 0
summary: C parser in Python
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-pycparser-2.18-0.src.rpm
location_href: armv7l/python3-pycparser-2.18-0.armv7l.rpm
checksum_type: sha256
description:
  pycparser is a complete parser of the C language, written in pure Python using
  the PLY parsing library. It parses C code into an AST and can serve as a
  front-end for C compilers or analysis tools.


pkgId: b92d18430e69c69d6d65a07824e456f01d75861279658c8775d4f0c2334b9929
name: python3-pytest-repeat
arch: noarch
version: 0.8.0
epoch: 0
release: 1
summary: pytest-repeat is a plugin for pytest
rpm_license: MPL-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-pytest-repeat-0.8.0-1.src.rpm
location_href: noarch/python3-pytest-repeat-0.8.0-1.noarch.rpm
checksum_type: sha256
description:
  pytest-repeat is a plugin for pytest that makes it easy to repeat a single test, or multiple tests, a specific number of times.


pkgId: 6290f13ba3c6ab5c6e7ada43740de24f3e5ee5354cc7ec27838911ce5767192f
name: python3-pytz
arch: armv7l
version: 2018.5
epoch: 0
release: 0
summary: World timezone definitions, modern and historical
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-pytz-2018.5-0.src.rpm
location_href: armv7l/python3-pytz-2018.5-0.armv7l.rpm
checksum_type: sha256
description:
  python-tz brings the Olson tz database into Python.
  This library allows accurate and cross platform timezone calculations
  using Python 2.3 or higher. It also solves the issue of ambiguous times
  at the end of daylight savings, which you can read more about in
  the Python Library Reference (datetime.tzinfo).


pkgId: c795e10cc2d15c0c1eeba06c6f6356efa81d16533585cb14de1824b319078834
name: python3-sqlite
arch: armv7l
version: 0.5.4
epoch: 0
release: 0
summary: DB-API 2.0 interface for SQLite 3.x
url: https://github.com/coleifer/pysqlite3
rpm_license: Zlib
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python3-sqlite-0.5.4-0.src.rpm
location_href: armv7l/python3-sqlite-0.5.4-0.armv7l.rpm
checksum_type: sha256
description:
  Python3 interface to SQLite 3
  pysqlite is an interface to the SQLite 3.x embedded relational database engine.
  It is almost fully compliant with the Python3 database API version 2.0 also
  exposes the unique features of SQLite.


pkgId: 7ca47c3cc887e069e75e6b8226680931d10dbbab0c974bc0111e07dbc462eb0a
name: re2c
arch: armv7l
version: 4.0.2
epoch: 0
release: 0
summary: Tool for generating C-based recognizers from regular expressions
url: http://re2c.org/
rpm_license: PD
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: re2c-4.0.2-0.src.rpm
location_href: armv7l/re2c-4.0.2-0.armv7l.rpm
checksum_type: sha256
description:
  re2c is a tool for writing fast and flexible lexers. Unlike other such
  tools, it concentrates solely on generating efficient code for matching
  regular expressions. This makes it suitable for a wide variety of
  applications. The generated scanners approach hand-crafted ones in
  terms of size and speed.


pkgId: 6fb1456e19d67c5475daefeab8b72c8a077324ab9a64464bbd274d5d6c44d718
name: rnnoise
arch: armv7l
version: 0
epoch: 0
release: 0.4
summary: Recurrent neural network for audio noise reduction
url: https://gitlab.xiph.org/xiph/rnnoise
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rnnoise-0-0.4.src.rpm
location_href: armv7l/rnnoise-0-0.4.armv7l.rpm
checksum_type: sha256
description:
  RNNoise is a noise suppression library based on a recurrent neural network.

  While it is meant to be used as a library, a simple command-line tool is
  provided as an example. It operates on RAW 16-bit (machine endian) mono PCM
  files sampled at 48 kHz. It can be used as:

  ./examples/rnnoise_demo <noisy speech> <output denoised>

  The output is also a 16-bit raw PCM file.


pkgId: 65c5ec1e90b6b119c53d9e66d5e61d01bbba6f71a42eb202c569c579150d3183
name: rsync
arch: armv7l
version: 3.2.7
epoch: 0
release: 0
summary: A program for synchronizing files over a network
url: http://rsync.samba.org/
rpm_license: GPL-3.0+
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: rsync-3.2.7-0.src.rpm
location_href: armv7l/rsync-3.2.7-0.armv7l.rpm
checksum_type: sha256
description:
  Rsync uses a reliable algorithm to bring remote and host files into
  sync very quickly. Rsync is fast because it just sends the differences
  in the files over the network instead of sending the complete
  files. Rsync is often used as a very powerful mirroring process or
  just as a more capable replacement for the rcp command. A technical
  report which describes the rsync algorithm is included in this
  package.


pkgId: 7a46c606959e8e0f9b8c7691628125881ed113b55f4f7b36cbb3dd43047642a6
name: rust
arch: armv7l
version: 1.74.0
epoch: 0
release: 1
summary: The Rust Programming Language
url: https://www.rust-lang.org
rpm_license: Apache-2.0 or MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-1.74.0-1.src.rpm
location_href: armv7l/rust-1.74.0-1.armv7l.rpm
checksum_type: sha256
description:
  Rust is a systems programming language that runs blazingly fast, prevents
  segfaults, and guarantees thread safety.

  This package includes the Rust compiler and documentation generator.


pkgId: 762cef532e8bb48ebc4844a2b731210bdc00bc08c0a6b64eb10528b357a77ec2
name: rust-cfg-if
arch: armv7l
version: 1.0.0
epoch: 0
release: 1
summary: Macro to ergonomically define an item depending on a large number of #[cfg] parameters
url: https://crates.io/crates/cfg-if
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-cfg-if-1.0.0-1.src.rpm
location_href: armv7l/rust-cfg-if-1.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  Macro to ergonomically define an item depending on a large number of #[cfg]
  parameters. Structured like an if-else chain, the first matching branch is the
  item that gets emitted.


pkgId: 44c14d7373d2b20453ff66c93f6bdc782c9ba9a4b38ed7fa52c9a0765ca082d4
name: rust-litrs
arch: armv7l
version: 0.4.0
epoch: 0
release: 1
summary: Parse and inspect Rust literals (i.e
url: https://crates.io/crates/litrs
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-litrs-0.4.0-1.src.rpm
location_href: armv7l/rust-litrs-0.4.0-1.armv7l.rpm
checksum_type: sha256
description:
  Parse and inspect Rust literals (i.e. tokens in the Rust programming language
  representing fixed values). Particularly useful for proc macros, but can also
  be used outside of a proc-macro context.


pkgId: ab2006c08730fd12a7677a4b113961e28e2970e1685610d667a0a46bac8df654
name: rust-normalize-line-endings
arch: armv7l
version: 0.3.0
epoch: 0
release: 1
url: https://crates.io/crates/normalize-line-endings
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-normalize-line-endings-0.3.0-1.src.rpm
location_href: armv7l/rust-normalize-line-endings-0.3.0-1.armv7l.rpm
checksum_type: sha256
summary:
  Takes an iterator over chars and returns a new iterator with all line endings (\r, \n, or \r\n) as \n

description:
  Takes an iterator over chars and returns a new iterator with all line endings
  (\r, \n, or \r\n) as \n.


pkgId: 1ed47a52530f3447be5a4540a95e26acfa0304e219d9fa7760712deb5e494dc6
name: rust-proc-macro2
arch: armv7l
version: 1.0.51
epoch: 0
release: 1
url: https://crates.io/crates/proc-macro2
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-proc-macro2-1.0.51-1.src.rpm
location_href: armv7l/rust-proc-macro2-1.0.51-1.armv7l.rpm
checksum_type: sha256
summary:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-based libraries from the procedural macro use case

description:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-
  based libraries from the procedural macro use case.


pkgId: 906284cff9a5eb6befc17e4ecf6c00b676d2c097ad995f87c92a1f0e80b11a4f
name: rust-regex
arch: armv7l
version: 1.7.1
epoch: 0
release: 1
summary: Implementation of regular expressions for Rust
url: https://crates.io/crates/regex
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-regex-1.7.1-1.src.rpm
location_href: armv7l/rust-regex-1.7.1-1.armv7l.rpm
checksum_type: sha256
description:
  Implementation of regular expressions for Rust. This implementation uses finite
  automata and guarantees linear time matching on all inputs.


pkgId: 46346b52fc5b2e2b7209cc21d293b450ea948a236e681ff74e9bbb551693fa8c
name: rust-scopeguard
arch: armv7l
version: 1.1.0
epoch: 0
release: 1
url: https://crates.io/crates/scopeguard
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-scopeguard-1.1.0-1.src.rpm
location_href: armv7l/rust-scopeguard-1.1.0-1.armv7l.rpm
checksum_type: sha256
summary:
  RAII scope guard that will run a given closure when it goes out of scope, even if the code between panics (assuming unwinding panic)

description:
  RAII scope guard that will run a given closure when it goes out of scope, even
  if the code between panics (assuming unwinding panic).
  Defines the macros `defer!`, `defer_on_unwind!`, `defer_on_success!` as
  shorthands for guards with one of the implemented strategies.


pkgId: 9391c21952402fd8b3b87292e4b7a49ae90e3c56f4664403126c55b74a7ec2d9
name: rust-serde_spanned
arch: armv7l
version: 0.6.1
epoch: 0
release: 1
summary: Native Rust encoder and decoder of TOML-formatted files and streams
url: https://crates.io/crates/serde_spanned
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-serde_spanned-0.6.1-1.src.rpm
location_href: armv7l/rust-serde_spanned-0.6.1-1.armv7l.rpm
checksum_type: sha256
description:
  Native Rust encoder and decoder of TOML-formatted files and streams. Provides
  implementations of the standard Serialize/Deserialize traits for TOML data to
  facilitate deserializing and serializing Rust structures.


pkgId: 4e3a6d08c965d7eb9b34249b37da1ce7001d7c105186e858a5f0e2ed3214a841
name: rust-stable_deref_trait
arch: armv7l
version: 1.2.0
epoch: 0
release: 1
url: https://crates.io/crates/stable_deref_trait
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-stable_deref_trait-1.2.0-1.src.rpm
location_href: armv7l/rust-stable_deref_trait-1.2.0-1.armv7l.rpm
checksum_type: sha256
summary:
  Unsafe marker trait for types like Box and Rc that dereference to a stable address even when moved, and hence can be used with libraries such as owning_ref and rental

description:
  Unsafe marker trait for types like Box and Rc that dereference to a stable
  address even when moved, and hence can be used with libraries such as
  owning_ref and rental.


pkgId: 667fe8b3982945b331baeea40033e2c4603961734381728ec057a49b83a616c1
name: rust-unicode-ident
arch: armv7l
version: 1.0.6
epoch: 0
release: 1
url: https://crates.io/crates/unicode-ident
rpm_license: (MIT OR Apache-2.0) AND Unicode-DFS-2016
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-unicode-ident-1.0.6-1.src.rpm
location_href: armv7l/rust-unicode-ident-1.0.6-1.armv7l.rpm
checksum_type: sha256
summary:
  Determine whether characters have the XID_Start or XID_Continue properties according to Unicode Standard Annex #31

description:
  Determine whether characters have the XID_Start or XID_Continue properties
  according to Unicode Standard Annex #31.


pkgId: 27719dde5fc35c2b0214263caec4bd481b9d7ddc5025bfe1e31c6f7f3fdfbc87
name: rust-version-compare
arch: armv7l
version: 0.1.1
epoch: 0
release: 1
url: https://crates.io/crates/version-compare
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-version-compare-0.1.1-1.src.rpm
location_href: armv7l/rust-version-compare-0.1.1-1.armv7l.rpm
checksum_type: sha256
summary:
  Rust library to easily compare version numbers with no specific format, and test against various comparison operators

description:
  Rust library to easily compare version numbers with no specific format, and
  test against various comparison operators.


pkgId: c3471d86acdbea838df506ab0192335c4f610c196c86080ca22a607a70f49c6a
name: scons
arch: armv7l
version: 4.4.0
epoch: 0
release: 0
summary: Replacement for Make
url: http://www.scons.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Tools/Building
rpm_sourcerpm: scons-4.4.0-0.src.rpm
location_href: armv7l/scons-4.4.0-0.armv7l.rpm
checksum_type: sha256
description:
  SCons is a make replacement that provides a range of enhanced features,
  such as automated dependency generation and built-in compilation cache
  support. SCons rule sets are Python scripts, which means that SCons
  provides itself as well as the features. SCons allows you to use the
  full power of Python to control compilation.


pkgId: 62368b2ef74b5c6f6da3b1393591e6fc78a033de7ec79fbea298d2324174f4ee
name: sdbd-profile_tv
arch: armv7l
version: 3.0.50
epoch: 0
release: 0
summary: SDB daemon extension for TV
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sdbd-3.0.50-0.src.rpm
location_href: armv7l/sdbd-profile_tv-3.0.50-0.armv7l.rpm
checksum_type: sha256
description:
  SDB daemon extension for TV.
  This changes the service unit files of the default SDB daemon service files.


pkgId: 6919434d9ad42402ea1f72c2797fd4d1a6e0c17d89ad89d9d425b0a36ede3879
name: security-privilege-manager
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: Privilege Manager API
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.3.1-0.src.rpm
location_href: armv7l/security-privilege-manager-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.


pkgId: 4b5dca8c7c577c5599e3ef113cb049a225558132451c7938f819a689fa2ce853
name: security-privilege-manager-extension-iot
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen IoT profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.3.1-0.src.rpm
location_href: armv7l/security-privilege-manager-extension-iot-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen IoT profile,
  which requires security-profile-manger to be installed before this.


pkgId: c50b4c18de28d2f89c8e07be4de0f35427138feb0354bbaa85a7f7fdc47ad28d
name: security-privilege-manager-extension-mobile
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen Mobile profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.3.1-0.src.rpm
location_href: armv7l/security-privilege-manager-extension-mobile-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen Mobile profile,
  which requires security-profile-manger to be installed before this.


pkgId: a71162deda962dfeeb9fd78507e50eabec67340f1e9f206854cf63aa211a6c7e
name: security-privilege-manager-extension-tv
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen TV profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.3.1-0.src.rpm
location_href: armv7l/security-privilege-manager-extension-tv-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen TV profile,
  which requires security-profile-manger to be installed before this.


pkgId: b2b73f3b7a9b18cf23d0be778cb3fc49365eba41c08afddc82b892148ecc6160
name: security-privilege-manager-extension-wearable
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen Wearable profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.3.1-0.src.rpm
location_href: armv7l/security-privilege-manager-extension-wearable-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen Wearable profile,
  which requires security-profile-manger to be installed before this.


pkgId: b90f6ee95d295ee908de3bc97168e2d59438c2bcd9d1b413cf616748d6aa3f50
name: sensord
arch: armv7l
version: 10.0.0
epoch: 0
release: 1
summary: Sensor daemon
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Sensor Framework
rpm_sourcerpm: sensord-10.0.0-1.src.rpm
location_href: armv7l/sensord-10.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  This package provides the fully functional internal API library and the service daemon
  of the Sensor Framework. The library replaces the dummy library installed by sensord-dummy.


pkgId: 2055f0503ac572e6457b068b7a121387355370836b339426d35d16a1cbc6a72e
name: sensord-dummy
arch: armv7l
version: 10.0.0
epoch: 0
release: 1
summary: Sensor Framework 'dummy' library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Sensor Framework
rpm_sourcerpm: sensord-10.0.0-1.src.rpm
location_href: armv7l/sensord-dummy-10.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  This package provides the dummy library of the sensor internal API.
  Installing sensord replaces this dummy library with the actually functional library.


pkgId: 8f2369cf3f075d85719ae752af68ab4cc4ab88d18de365107e09df12e2d628b3
name: sgml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 0
summary: Common SGML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Applications/Text
rpm_sourcerpm: sgml-common-0.6.3-0.src.rpm
location_href: noarch/sgml-common-0.6.3-0.noarch.rpm
checksum_type: sha256
description:
  The sgml-common package contains a collection of entities and DTDs
  that are useful for processing SGML, but that don't need to be
  included in multiple packages.  Sgml-common also includes an
  up-to-date Open Catalog file.


pkgId: fa0ed9414b6217b62e384ff42965536e75fada0db83835563d3f0f7f80693120
name: shared-mime-info
arch: armv7l
version: 1.7
epoch: 0
release: 0
summary: Shared MIME Database
url: http://freedesktop.org/wiki/Software/shared-mime-info
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Base/Configuration
rpm_sourcerpm: shared-mime-info-1.7-0.src.rpm
location_href: armv7l/shared-mime-info-1.7-0.armv7l.rpm
checksum_type: sha256
description:
  This package contains:

  - The freedesktop.org shared MIME database spec.

  - The merged GNOME and KDE databases, in the new format.

  - The update-mime-database command, used to install new MIME data.


pkgId: 745669bec90cf9794f74f77af5fb5cda968c0ddc4f44e746e45a1803d5c3513d
name: snappy-devel
arch: armv7l
version: 1.1.7
epoch: 0
release: 0
summary: Development files for snappy
url: https://github.com/google/snappy/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: snappy-1.1.7-0.src.rpm
location_href: armv7l/snappy-devel-1.1.7-0.armv7l.rpm
checksum_type: sha256
description:
  Snappy is a compression/decompression library. It does not aim for maximum
  compression, or compatibility with any other compression library; instead, it
  aims for very high speeds and reasonable compression. For instance, compared to
  the fastest mode of zlib, Snappy is an order of magnitude faster for most
  inputs, but the resulting compressed files are anywhere from 20% to 100%
  bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy
  compresses at about 250 MB/sec or more and decompresses at about
  500 MB/sec or more.

  This package holds the development files for snappy.


pkgId: 54b23dde83947dfded466b12bd4211822658fc545ddcbe7c39fe6cbd04bb6a60
name: snpe-devel
arch: armv7l
version: 1.53.2
epoch: 0
release: 1
summary: development package for snpe-dummy
rpm_license: BSD-2-Clause
rpm_vendor: tizen
rpm_group: Machine Learning/ML Framework
rpm_sourcerpm: snpe-1.53.2-1.src.rpm
rpm_packager: Sangjung Woo <sangjung.woo@samsung.com>
location_href: armv7l/snpe-devel-1.53.2-1.armv7l.rpm
checksum_type: sha256
description:
  This package in public Tizen.org is DUMMY (no contents) to keep the build system
  running w/o actual SNPE packages.


pkgId: 0e268f863f1ff962f15edc18a1172acba3b08801c6476e579a1e68ebb706adbc
name: soundtouch
arch: armv7l
version: 2.1.0
epoch: 0
release: 0
summary: Audio processing library
url: https://gitlab.com
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Libraries
rpm_sourcerpm: soundtouch-2.1.0-0.src.rpm
location_href: armv7l/soundtouch-2.1.0-0.armv7l.rpm
checksum_type: sha256
description:
  Soundtouch is an audio processing library that allows changing
  the sound tempo, pitch and playback rate parameters independently from eash other.


pkgId: 0a0c0ab1f50a9bce2ca4da556e20e0974a3cda7b100d2e16ce22eca5fb76d464
name: sqlcipher
arch: armv7l
version: 4.6.1
epoch: 0
release: 0
url: https://github.com/sqlcipher/sqlcipher
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Security/Crypto Libraries
rpm_sourcerpm: sqlcipher-4.6.1-0.src.rpm
location_href: armv7l/sqlcipher-4.6.1-0.armv7l.rpm
checksum_type: sha256
summary:
  SQLCipher is an open source extension to SQLite that provides transparent 256-bit AES encryption of database files

description:
  SQLCipher is an open source library that provides transparent, secure 256-bit
  AES encryption of SQLite database files. SQLCipher has been adopted as a secure
  database solution by many commercial and open source products, making it one of
  the most popular encrypted database platforms for Mobile, Embedded, and Desktop
  applications.


pkgId: 68e1d74dddd9f1abece551ba202ca12cd1489f8b7b49ed026570f94b422d8f32
name: ssat
arch: armv7l
version: 1.4.0
epoch: 0
release: 0
summary: Shell Script Automated Tester
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: ssat-1.4.0-0.src.rpm
rpm_packager: MyungJoo Ham <myungjoo.ham@samsung.com>
location_href: armv7l/ssat-1.4.0-0.armv7l.rpm
checksum_type: sha256
description:
  SSAT provides testing environment for shell scripts with Apache-2.0 license.
  This is created to avoid any complications related with GPL licenses.


pkgId: 14f995ad886340d19d5400e48313071598fc83a96e1b0fc625ecb0683c2bbc7c
name: sshfs
arch: armv7l
version: 2.10
epoch: 0
release: 0
summary: A network filesystem client to connect to SSH servers
url: https://github.com/libfuse/sshfs
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Base/File Systems
rpm_sourcerpm: sshfs-2.10-0.src.rpm
location_href: armv7l/sshfs-2.10-0.armv7l.rpm
checksum_type: sha256
description:
  SSHFS (Secure SHell FileSystem) allows you to mount a remote filesystem
  using SFTP. Now that most SSH servers support and enable this SFTP access
  by default, the SSHFS is very simple to use. It means that there is nothing
  to do on the server-side. Note that SSHFS requires FUSE (Filesystem in
  USErspace) filesystem, that lets non-privileged users create own file systems
  without editing Linux kernel code.


pkgId: 2179b2157d765b580422910ec575129be8f76f1bbe0b65e6623ba4cc25c594c5
name: strace
arch: armv7l
version: 6.6
epoch: 0
release: 0
summary: A utility to trace the system calls of a program
url: http://sourceforge.net/projects/strace/
rpm_license: LGPL-2.1+ and GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: strace-6.6-0.src.rpm
location_href: armv7l/strace-6.6-0.armv7l.rpm
checksum_type: sha256
description:
  With strace, you can trace the activity of a program.  Information
  about any system calls the program makes and the signals it receives
  and processes can be seen.  Child processes can also be tracked.


pkgId: 7c92874939433df18cbc7f8383ed36b74c732588e1525b975cbd55496215d317
name: sudo
arch: armv7l
version: 1.9.15p5
epoch: 0
release: 0
summary: Execute some commands as root
url: http://www.sudo.ws/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sudo-1.9.15p5-0.src.rpm
location_href: armv7l/sudo-1.9.15p5-0.armv7l.rpm
checksum_type: sha256
description:
  Sudo is a command that allows users to execute some commands as root.
  The /etc/sudoers file (edited with 'visudo') specifies which users have
  access to sudo and which commands they can run. Sudo logs all its
  activities to syslogd, so the system administrator can keep an eye on
  things. Sudo asks for the password for initializing a check period of a
  given time N (where N is defined at installation and is set to 5
  minutes by default).


pkgId: b87fc0a48200814ce6e92e5f24a72e8a58bdfe675c3002843b63a9e46a4dbda7
name: sudo-rpm
arch: armv7l
version: 1.9.15p5
epoch: 0
release: 0
summary: Script making possible to run RPM as root from inside build
url: http://www.sudo.ws/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sudo-1.9.15p5-0.src.rpm
location_href: armv7l/sudo-rpm-1.9.15p5-0.armv7l.rpm
checksum_type: sha256
description:
  The package will add ALL ALL = (root) NOPASSWD: /usr/bin/rpm to sudoers and
  makes possible to install packages from inside build.


pkgId: dfbda475f43288dd614aa4fb2fc1256d056a50e69ab952c68442dc8f8257a368
name: swig
arch: armv7l
version: 4.0.2
epoch: 0
release: 0
summary: Simplified Wrapper and Interface Generator
url: http://www.swig.org/
rpm_license: GPL-3.0+ and BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/C and C++
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: armv7l/swig-4.0.2-0.armv7l.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.


pkgId: 0936c1e5d6e62aebbc22f718a8a1d63f1f07779bdf0e46a2bc7d4618a4d3a2e2
name: swig-doc
arch: noarch
version: 4.0.2
epoch: 0
release: 0
summary: SWIG Manual
url: http://www.swig.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Documentation/Man
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: noarch/swig-doc-4.0.2-0.noarch.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.

  This package contains the SWIG manual.


pkgId: 42d135cbf98309b2c17a8696a1f8c40d3582f60351d12be7997c1a39def65685
name: swig-examples
arch: armv7l
version: 4.0.2
epoch: 0
release: 0
summary: SWIG example files
url: http://www.swig.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Documentation/Howto
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: armv7l/swig-examples-4.0.2-0.armv7l.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.

  This package contains SWIG examples, useful both for testing and
  understandig SWIG usage.


pkgId: 7a5cd49a9857b0ecc952a5a92bd6a0aa7e31836236932232265344f901e3ad3b
name: system-rw-update
arch: armv7l
version: 1.3.0
epoch: 0
release: 0
summary: System RW Update Manager
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: system-rw-update-1.3.0-0.src.rpm
location_href: armv7l/system-rw-update-1.3.0-0.armv7l.rpm
checksum_type: sha256
description:
  System RW update manager provides interface for running platform/application update scripts
  after software is updated to new version which is implemented by using systemd offline update.


pkgId: 2aeab4d09f1d1c4021b184ede7fe8119be756bd2b648269364d291cc0abc34a2
name: system-servant-profile_common
arch: armv7l
version: 0.2.2
epoch: 0
release: 1
summary: System-servant configured for common profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: system-servant-0.2.2-1.src.rpm
location_href: armv7l/system-servant-profile_common-0.2.2-1.armv7l.rpm
checksum_type: sha256
description:
  System-popup (system-servant) configured for common profile.
  The binary is shared between common/tv.


pkgId: 813b9ea5780135ec62be2b88a5eed376884332b7719c93941426f10f56accf82
name: systemd
arch: armv7l
version: 244
epoch: 0
release: 0
summary: A System and Service Manager
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+ and GPL-2.0+
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: armv7l/systemd-244-0.armv7l.rpm
checksum_type: sha256
description:
  systemd is a system and service manager for Linux, compatible with
  SysV and LSB init scripts. systemd provides aggressive parallelization
  capabilities, uses socket and D-Bus activation for starting services,
  offers on-demand starting of daemons, keeps track of processes using
  Linux cgroups, supports snapshotting and restoring of the system
  state, maintains mount and automount points and implements an
  elaborate transactional dependency-based service control logic. It can
  work as a drop-in replacement for sysvinit.


pkgId: a7aab6b5fae71a295cb6c86fb55dbe15c115bf4a2f0921e3a3d9d9a92286a2d5
name: systemd-analyze
arch: armv7l
version: 244
epoch: 0
release: 0
summary: Tool for processing systemd profiling information
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: armv7l/systemd-analyze-244-0.armv7l.rpm
checksum_type: sha256
description:
  'systemd-analyze blame' lists which systemd unit needed how much time to finish
  initialization at boot.
  'systemd-analyze plot' renders an SVG visualizing the parallel start of units
  at boot.


pkgId: 5bc30826621be629698ba7c04252c9b0ceba599c50ea4181d65117ed53788d01
name: systemd-tests
arch: armv7l
version: 244
epoch: 0
release: 0
summary: Set of tests for sd-bus component
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+ and BSD-2-Clause
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: armv7l/systemd-tests-244-0.armv7l.rpm
checksum_type: sha256
description:
  This package is part of 'dbus-integratnion-tests' framework and contains set of tests
  for sd-bus component (DBUS API C library).


pkgId: 9994ba37e1c36577bddbd9691c3e241bd8e51af543932cf1c27b64249fba6564
name: sz2-devel
arch: armv7l
version: 1.0.1
epoch: 0
release: 0
summary: Development files for libsz2
url: https://gitlab.dkrz.de/k202009/libaec
rpm_license: BSD-2-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: libaec-1.0.1-0.src.rpm
location_href: armv7l/sz2-devel-1.0.1-0.armv7l.rpm
checksum_type: sha256
description:
  Header files for libsz2, a drop-in replacement for the
  SZIP library (http://www.hdfgroup.org/doc_resource/SZIP).


pkgId: 727064de3057556d0687ef2d919d249ab40ed2db48359f76936316c38d07d222
name: tayga
arch: armv7l
version: 0.9.2
epoch: 0
release: 1
summary: Simple, no-fuss NAT64 for Linux
url: http://www.litech.org/tayga/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Tools
rpm_sourcerpm: tayga-0.9.2-1.src.rpm
location_href: armv7l/tayga-0.9.2-1.armv7l.rpm
checksum_type: sha256
description:
  TAYGA is an out-of-kernel stateless NAT64 implementation for Linux that uses
  the TUN driver to exchange IPv4 and IPv6 packets with the kernel.
  It is intended to provide production-quality NAT64 service for networks
  where dedicated NAT64 hardware would be overkill.


pkgId: f3706e7be7dbd6a5b988d210da208ee68e5ef790f6b456ce454e50e3bc9c2500
name: tcpdump
arch: armv7l
version: 4.9.3
epoch: 0
release: 1
summary: A Packet Sniffer
url: http://www.tcpdump.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Productivity/Networking/Diagnostic
rpm_sourcerpm: tcpdump-4.9.3-1.src.rpm
location_href: armv7l/tcpdump-4.9.3-1.armv7l.rpm
checksum_type: sha256
description:
  This program can "read" all or only certain packets going over the
  ethernet. It can be used to debug specific network problems.


pkgId: d1ddb4f8f521e717dbe330cbe20bada147c2e7b0c6a6f7d38463494e5d7f30c8
name: tel-plugin-packetservice-dbinit-profile_common
arch: armv7l
version: 0.4.32
epoch: 0
release: 1
summary: DB Init Script for non-IVI tel-plugin-packetservice
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Telephony/Configuration
rpm_sourcerpm: tel-plugin-packetservice-0.4.32-1.src.rpm
location_href: armv7l/tel-plugin-packetservice-dbinit-profile_common-0.4.32-1.armv7l.rpm
checksum_type: sha256
description:
  Default DB init script for tel-plugin-packetservice installation.
  Common for common/mobile/wearable profiles.


pkgId: 64512a163758787eb35d7eec3d8c5537045f3ec9df72bd20572a4bbcdb4a3e45
name: tizen-debug
arch: armv7l
version: 2.40
epoch: 0
release: 1
summary: libc debug information with .debug_frame section only and ld debug information
rpm_license: LGPL-2.1+ and LGPL-2.1+-with-GCC-exception and GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: tizen-debug-2.40-1.src.rpm
location_href: armv7l/tizen-debug-2.40-1.armv7l.rpm
checksum_type: sha256
description:
  The package contains the libc.so debug library with .debug_frame section only
  which can be helpful during signal frame backtrace.
  Also, the ld.so debug information is included for the debugging convenience.


pkgId: e6656c738bad2662aa17cce643a2ec6b762964da209c4fbf0d3cec672f0df92c
name: tlm
arch: armv7l
version: 1.0.3
epoch: 0
release: 1
summary: Login manager for Tizen
url: https://github.com/01org/tlm
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: System/Service
rpm_sourcerpm: tlm-1.0.3-1.src.rpm
location_href: armv7l/tlm-1.0.3-1.armv7l.rpm
checksum_type: sha256
description:
  TLM is a daemon that handles user logins in a multi-user, multi-seat system by
  authenticating the users through PAM, and setting up, launching, and tracking
  user sessions.


pkgId: 56cb4acfc7a64cc15b9386dee2851f9e70bb7f1b4467c558f4898bb19b8558c1
name: tolua++
arch: armv7l
version: 1.0.93
epoch: 0
release: 0
summary: C/C++ with Lua Integration Tool
url: http://www.codenix.com/~tolua/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: tolua++-1.0.93-0.src.rpm
location_href: armv7l/tolua++-1.0.93-0.armv7l.rpm
checksum_type: sha256
description:
  tolua++ is an extended version of tolua, a tool to integrate C/C++ code with
  Lua. tolua++ includes new features oriented to c++ such as:
  * support for std::string as a basic type (this can be turned off by a command
    line option)
  * support for class templates
  as well as other features and bugfixes.


pkgId: cdbd83f7ab2a72e609e30b512562a3fe2234d89a10521bf83b4d0681da232a36
name: toybox
arch: armv7l
version: 0.6.0
epoch: 0
release: 1
summary: Single binary providing simplified versions of system commands
url: http://www.landley.net/toybox/
rpm_license: BSD-2.0
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: toybox-0.6.0-1.src.rpm
location_href: armv7l/toybox-0.6.0-1.armv7l.rpm
checksum_type: sha256
description:
  Toybox is a single binary which includes versions of a large number
  of system commands, including a shell.  This package can be very
  useful for recovering from certain types of system failures,
  particularly those involving broken shared libraries.


pkgId: 7dbede09a6234967166b2ffa82e3f14104f3188be9a87313c5800828aa43bede
name: trust-anchor
arch: armv7l
version: 2.1.2
epoch: 0
release: 0
summary: Trust Anchor API
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Security/Certificate Management
rpm_sourcerpm: trust-anchor-2.1.2-0.src.rpm
location_href: armv7l/trust-anchor-2.1.2-0.armv7l.rpm
checksum_type: sha256
description:
  The package provides trust-anchor which the application can assign
  SSL root certificates for its HTTPS communication.


pkgId: 087cb7896750679562245adb68ad4504f637054aea8a861a45cd3c41d7e7a199
name: tvm-runtime
arch: armv7l
version: 0.7.0
epoch: 0
release: 0
summary: TVM Runtime Library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: tvm-runtime-0.7.0-0.src.rpm
location_href: armv7l/tvm-runtime-0.7.0-0.armv7l.rpm
checksum_type: sha256
description:
  Apache TVM is a compiler stack for deep learning systems. It is designed to close the gap between the productivity-focused deep learning frameworks, and the performance- and efficiency-focused hardware backends. TVM works with deep learning frameworks to provide end to end compilation to different backends.


pkgId: 6a89c0aa59d927ca8ba941ed1d3b6e1b7c1fd8ba9b011ba481e58df921184d02
name: typelib-1_0-Atspi-2_0
arch: armv7l
version: 2.44.1
epoch: 0
release: 1
summary: An Accessibility ToolKit -- Introspection bindings
url: http://www.gnome.org/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: at-spi2-core-2.44.1-1.src.rpm
location_href: armv7l/typelib-1_0-Atspi-2_0-2.44.1-1.armv7l.rpm
checksum_type: sha256
description:
  AT-SPI is a general interface for applications to make use of the
  accessibility toolkit. This version is based on dbus.

  This package provides the GObject Introspection bindings for the
  libatspi library.


pkgId: 1325074cb5b8cb82daeb79d462d48b46e735e72423ec8ecc3129af73e21cbac2
name: typelib-Json
arch: armv7l
version: 1.8.0
epoch: 0
release: 0
summary: Introspection bindings for libjson-glib
url: https://wiki.gnome.org/Projects/JsonGlib
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: json-glib-1.8.0-0.src.rpm
location_href: armv7l/typelib-Json-1.8.0-0.armv7l.rpm
checksum_type: sha256
description:
  JSON-GLib provides a parser and a generator GObject classes and various
  wrappers for the complex data types employed by JSON, such as arrays
  and objects.

  This package provides the GObject Introspection bindings for JSON-GLib.


pkgId: 3d4ddb6123d09e41f35548bc957fb8a323cbc8d88902610916489432d5dac46c
name: typelib-Soup
arch: armv7l
version: 2.72.0
epoch: 0
release: 1
summary: HTTP client/server library for GNOME -- Introspection bindings
url: http://www.gnome.org
rpm_license: LGPL-2.0+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: libsoup-2.72.0-1.src.rpm
location_href: armv7l/typelib-Soup-2.72.0-1.armv7l.rpm
checksum_type: sha256
description:
  Libsoup is an HTTP client/server library for GNOME. It uses GObjects
  and the glib main loop, to integrate well with GNOME applications.

  This package provides the GObject Introspection bindings for libsoup.


pkgId: 2dd4e390da7e117ceba80db906c7e7e2c2f5bc3e0c77eed05e770a031a6089e9
name: u-boot-tools
arch: armv7l
version: 2024.10
epoch: 0
release: 0
summary: Companion tools for Das U-Boot bootloader
url: https://source.denx.de/u-boot/u-boot.git
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Kernel
rpm_sourcerpm: u-boot-2024.10-0.src.rpm
location_href: armv7l/u-boot-tools-2024.10-0.armv7l.rpm
checksum_type: sha256
description:
  This package includes the mkimage program, which allows generation of U-Boot
  images in various formats, and the fw_printenv and fw_setenv programs to read
  and modify U-Boot's environment.


pkgId: b99babd01ab3c1ac095891878822b674a45aa4883c4a9d2d6fa2cc2cf41b8a0f
name: ug-nfc-efl-profile_common
arch: armv7l
version: 3.1.9
epoch: 0
release: 0
summary: NFC Setting UI for Common (+TV, +IVI)
rpm_license: Flora-1.1
rpm_vendor: tizen
rpm_group: App/Network
rpm_sourcerpm: ug-nfc-efl-3.1.9-0.src.rpm
location_href: armv7l/ug-nfc-efl-profile_common-3.1.9-0.armv7l.rpm
checksum_type: sha256
description:
  NFC Setting UI for common profile. TV/IVI profile may share this if needed.
  Note that as of 2016/10/07, TV/IVI do not include ug-nfc-efl.
  But, for future usage, we assume that they will be based on this profile
  if someone adds ug-nfc-efl for TV/IVI.


pkgId: 8b8a1d33916de1d2e3ff50e94241534a81eeddc75c8b78e9847feb9703626bc7
name: united-service
arch: armv7l
version: 1.2.0
epoch: 0
release: 0
summary: United Service
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: App Framework/Application Core
rpm_sourcerpm: united-service-1.2.0-0.src.rpm
location_href: armv7l/united-service-1.2.0-0.armv7l.rpm
checksum_type: sha256
description:
  United service is to integrate multiple currently independent daemons into one process
  to improve management efficiency, optimize resource usage, and ensure consistency between services.


pkgId: 80200dc28ece44a8555aed9fb68d5fd81248a1d97a7b846f03de4abbddd41938
name: update-desktop-files
arch: noarch
version: 12.1
epoch: 0
release: 0
summary: A Build Tool to Update Desktop Files
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: update-desktop-files-12.1-0.src.rpm
location_href: noarch/update-desktop-files-12.1-0.noarch.rpm
checksum_type: sha256
description:
  This package provides further translations and a shell script to update
  desktop files. It is used by the %tizen_update_desktop_file rpm macro.


pkgId: 13bab7d2c8256dfd6c48cbef053861073d6dd1a8a408ee004e9d7240d1560a64
name: upgrade-parse-dynparts
arch: armv7l
version: 10.0.0
epoch: 0
release: 0
summary: Utility needed to parse dynamic partition on-disk format
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: armv7l/upgrade-parse-dynparts-10.0.0-0.armv7l.rpm
checksum_type: sha256
description:
  This package provides utility needed to parse "super" on-disk format, and print
  out necessary device mapper maps, needed to later mount filesystems contained in
  dynamic partition area.


pkgId: ea84d510740dc57218b87261e4791255827545babd6a54131eed07be4601bd04
name: upgrade-resize-dynparts
arch: armv7l
version: 10.0.0
epoch: 0
release: 0
summary: Utility for modification of dynamic partitions size in super metadata
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: armv7l/upgrade-resize-dynparts-10.0.0-0.armv7l.rpm
checksum_type: sha256
description:
  This package provides utility needed to modify metadata of a super partition by
  changing size of dynamic partitions.


pkgId: 43465ac56bb3a2759d99771eaac5102a3ffbdc78550921b56261d0f73a9917dd
name: upgrade-ro
arch: armv7l
version: 10.0.0
epoch: 0
release: 0
summary: Contains all necessary tools to perform RO Upgrade
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: armv7l/upgrade-ro-10.0.0-0.armv7l.rpm
checksum_type: sha256
description:
  Update engine adding all necessary tools, scripts and configuration
  for updating Tizen platform images using delta files as generated by
  upgrade-tools.


pkgId: 16a91041b58e4da3210ba12897108c6126e175ce2e991700aa5e4aadf7513e42
name: usb-modeswitch
arch: armv7l
version: 2.2.6
epoch: 0
release: 2
summary: USB Modeswitch gets mobile broadband cards in operational mode
url: http://www.draisberghof.de/usb_modeswitch/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: System/Tools
rpm_sourcerpm: usb-modeswitch-2.2.6-2.src.rpm
location_href: armv7l/usb-modeswitch-2.2.6-2.armv7l.rpm
checksum_type: sha256
description:
  USB Modeswitch brings up your datacard into operational mode. When plugged
  in they identify themselves as cdrom and present some non-Linux compatible
  installation files. This tool deactivates this cdrom-devices and enables
  the real communication device. It supports most devices built and
  sold by Huawei, T-Mobile, Vodafone, Option, ZTE, Novatel.


pkgId: 11cae2b8180e516fab30263223f2a657d62ed6e33e2a85a99f8808bb613200f2
name: valgrind
arch: armv7l
version: 3.25.0
epoch: 0
release: 0
summary: Memory Management Debugger
url: http://valgrind.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools/Debuggers
rpm_sourcerpm: valgrind-3.25.0-0.src.rpm
location_href: armv7l/valgrind-3.25.0-0.armv7l.rpm
checksum_type: sha256
description:
  Valgrind checks all memory operations in an application, like read,
  write, malloc, new, free, and delete. Valgrind can find uses of
  uninitialized memory, access to already freed memory, overflows,
  illegal stack operations, memory leaks, and any illegal
  new/malloc/free/delete commands. Another program in the package is
  "cachegrind," a profiler based on the valgrind engine.

  To use valgrind you should compile your application with "-g -O0"
  compiler options. Afterwards you can use it with:

  valgrind --tool=memcheck --sloppy-malloc=yes --leak-check=yes
  --db-attach=yes my_application, for example.

  More valgrind options can be listed via "valgrind --help". A
  debugged application runs slower and needs much more memory, but
  is usually still usable. Valgrind is still in development, but it
  has been successfully used to optimize several KDE applications.


pkgId: abf38338207eb6099883b3888684b31faae3b291614e2859b17f0181d6eac9d1
name: vcgencmd
arch: armv7l
version: 0.0.1
epoch: 0
release: 4
summary: vcgencmd tools for the Raspberry Pi
url: https://github.com/raspberrypi/userland
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: System/Tools
rpm_sourcerpm: libomxil-vc4-0.0.1-4.src.rpm
location_href: armv7l/vcgencmd-0.0.1-4.armv7l.rpm
checksum_type: sha256
description:
  This package contains vcgencmd system tools for the Raspberry Pi.
  Source: https://github.com/raspberrypi/userland.git


pkgId: e1337127ceac6d2b398be36b658c93a96bf4a103b2734074d548b7e563722ea3
name: vconf-internal-keys-config-profile_common
arch: armv7l
version: 0.0.194
epoch: 0
release: 0
summary: Configure vconf internal shared keys for common
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.194-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_common-0.0.194-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for common
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 8e6c1b1c33cb6d17acf1facf027a886548b1d097720ec993608d2a3dc0985523
name: vconf-internal-keys-config-profile_ivi
arch: armv7l
version: 0.0.194
epoch: 0
release: 0
summary: Configure vconf internal shared keys for ivi
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.194-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_ivi-0.0.194-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for ivi
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 16a751b0573064e220c4981d90315496c51923a9ccb06a3fe9ef0621d53a991b
name: vconf-internal-keys-config-profile_mobile
arch: armv7l
version: 0.0.194
epoch: 0
release: 0
summary: Configure vconf internal shared keys for mobile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.194-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_mobile-0.0.194-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for mobile.
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 514dbd9903f11de60ba08f4803470b9e46077ae8ba52788cb3bcff0ab93f0923
name: vconf-internal-keys-config-profile_tv
arch: armv7l
version: 0.0.194
epoch: 0
release: 0
summary: Configure vconf internal shared keys for tv
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.194-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_tv-0.0.194-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for tv
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: d0fc09495536204463d02762dcf8990cdf901121a8d8220ea25c227e4aa13ca5
name: vconf-internal-keys-config-profile_wearable
arch: armv7l
version: 0.0.194
epoch: 0
release: 0
summary: Configure vconf internal shared keys for wearable
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.194-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_wearable-0.0.194-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for wearable
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 16cb25b9475e55563d9ced69b19e9707fe726bcf6c4686fde71985ff894ce9f5
name: verity-tools
arch: armv7l
version: 2.2
epoch: 0
release: 1
summary: A tool for dm-verity
rpm_license: MIT
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: initrd-2.2-1.src.rpm
location_href: armv7l/verity-tools-2.2-1.armv7l.rpm
checksum_type: sha256
description:
  verityctl tool for dm-verity. Similar with veritysetup of cryptsetup
  but it can handle with verity meta data block.


pkgId: 309f0a57ae2acbbb60dba5362e77048ecf103a581462e4f6a32c0a1ed9e7c8ae
name: vi
arch: armv7l
version: 050325
epoch: 0
release: 1
summary: The Traditional Vi
url: http://ex-vi.sourceforge.net/
rpm_license: BSD-4-Clause-UC and BSD-4-Clause-Caldera
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: vi-050325-1.src.rpm
location_href: armv7l/vi-050325-1.armv7l.rpm
checksum_type: sha256
description:
  Compared to most of its many clones, the traditional vi is a rather small
  program just with its extremely powerful editing interface, but lacking fancy
  features like multiple undo, multiple screens, or syntax highlighting.
  This port of vi has generally preserved the original style, terminal control,
  and feature set. It adds support for international character sets, including
  multibyte encodings such as UTF-8, and some minor enhancements that were not
  present in BSD vi 3.7, but had been included in later vi versions for System V
  or in POSIX.2.


pkgId: 69393975134c81c57263caeaade636bf4ccd7f70df483d70d1676777c6f270aa
name: vpx-tools
arch: armv7l
version: 1.12.0
epoch: 0
release: 2
summary: VP8 codec library - Utilities
url: http://www.webmproject.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Multimedia/Libraries
rpm_sourcerpm: libvpx-1.12.0-2.src.rpm
location_href: armv7l/vpx-tools-1.12.0-2.armv7l.rpm
checksum_type: sha256
description:
  This package contains utilities around the vp8 codec sdk.

  WebM is an open, royalty-free, media file format designed for the web.

  WebM defines the file container structure, video and audio formats.
  WebM files consist of video streams compressed with the VP8 video codec
  and audio streams compressed with the Vorbis audio codec.
  The WebM file structure is based on the Matroska container.


pkgId: a8cb04c7fe0509fb140ca8860ed3234183ba59f213accf78f8f5ce0393e74f87
name: vulkan-loader-devel
arch: armv7l
version: 1.3.296
epoch: 0
release: 0
summary: Development files for vulkan-loader
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-loader-1.3.296-0.src.rpm
location_href: armv7l/vulkan-loader-devel-1.3.296-0.armv7l.rpm
checksum_type: sha256
description:
  The vulkan-loader-devel package contains libraries and header files for
  developing applications that use vulkan-loader.


pkgId: b6261ebcd25b950548539070e5b5902a4080033dca966c28c7fc08450bb90997
name: vulkan-utility-libraries
arch: armv7l
version: 1.3.296
epoch: 0
release: 0
summary: Vulkan utility libraries
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-utility-libraries-1.3.296-0.src.rpm
location_href: armv7l/vulkan-utility-libraries-1.3.296-0.armv7l.rpm
checksum_type: sha256
description:
  This repo was created to share code across various Vulkan repositories,
  solving long standing issues for Vulkan SDK developers and users.


pkgId: 13776efeff917011ae5819602ebe1b7d89dfefd057edbe825c530765300596e1
name: vulkan-validation-layers-devel
arch: armv7l
version: 1.3.296
epoch: 0
release: 0
summary: Development files for vulkan-validation-layers
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-validation-layers-1.3.296-0.src.rpm
location_href: armv7l/vulkan-validation-layers-devel-1.3.296-0.armv7l.rpm
checksum_type: sha256
description:
  The vulkan-validation-layers-devel package contains libraries and header files for
  developing applications that use vulkan-validation-layers.


pkgId: ad713bcf9d769e1609688b6b02127afb9150c16fe978ca62811ab7ca929e8963
name: wayland-devel
arch: armv7l
version: 1.23.1
epoch: 0
release: 0
summary: Development files for the Wayland Compositor Infrastructure
url: http://wayland.freedesktop.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-1.23.1-0.src.rpm
location_href: armv7l/wayland-devel-1.23.1-0.armv7l.rpm
checksum_type: sha256
description:
  Wayland is a protocol for a compositor to talk to its clients as well
  as a C library implementation of that protocol. The compositor can be
  a standalone display server running on Linux kernel modesetting and
  evdev input devices, an X application, or a wayland client itself.
  The clients can be traditional applications, X servers (rootless or
  fullscreen) or other display servers.

  This package contains all necessary include files and libraries needed
  to develop applications that require these.


pkgId: 0bca3e70d55f54b6e943dfb74a0f3b25696c869d05714ba58b52bd2360389ca9
name: wayland-extension-client-devel
arch: armv7l
version: 1.3.68
epoch: 0
release: 0
summary: Client development files for the Wayland Extension Protocol
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.68-0.src.rpm
location_href: armv7l/wayland-extension-client-devel-1.3.68-0.armv7l.rpm
checksum_type: sha256
description:
  wayland-extension is a protocol for tizen window system.

  This package contains all necessary include files and libraries needed
  to develop applications that require these.


pkgId: f85b78dab0a225e07eaccb63bdca246a1639b2f37ca392b17d379c058d7cc640
name: wayland-extension-server-devel
arch: armv7l
version: 1.3.68
epoch: 0
release: 0
summary: Server development files for the Wayland Extension Protocol
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.68-0.src.rpm
location_href: armv7l/wayland-extension-server-devel-1.3.68-0.armv7l.rpm
checksum_type: sha256
description:
  wayland-extension is a protocol for tizen window system.

  This package contains all necessary include files and libraries needed
  to develop a compositor that require these.


pkgId: 42792a4cde6196695b1cd7659f73b41ac428d1b104c849b0b733542ab8d00cfe
name: wayland-protocols
arch: armv7l
version: 1.3.68
epoch: 0
release: 0
summary: Wayland upstream protocols
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.68-0.src.rpm
location_href: armv7l/wayland-protocols-1.3.68-0.armv7l.rpm
checksum_type: sha256
description:
  wayland-protocols contains Wayland upstream protocols that add functionality not available in the Wayland core protocol


pkgId: 4f8f1553305095f3fd6c6f365e4cd54201d31974afd666f39def266a4574b5fe
name: wdiff
arch: armv7l
version: 1.2.2
epoch: 0
release: 1
summary: Display Word Differences Between Text Files
url: https://ftp.gnu.org/gnu/wdiff/
rpm_license: GPL-3.0+
rpm_vendor: tizen
rpm_group: Productivity/Text/Utilities
rpm_sourcerpm: wdiff-1.2.2-1.src.rpm
location_href: armv7l/wdiff-1.2.2-1.armv7l.rpm
checksum_type: sha256
description:
  wdiff compares two files and finds which words have been deleted or
  added to old_file to get new_file. A word is considered to be anything
  between whitespace.

  Xwdiff is a handy X Window System front-end, based on Tcl/Tk.


pkgId: d6731e463ecbf30c23aef12b6017a7d3a15ef4ec9a5536a38fe781205747ad00
name: webauthn-ble-manual-tests
arch: armv7l
version: 1.0.6
epoch: 0
release: 1
summary: Adaptation Layer of Web Authentication Service for BLE Authenticator (manual test)
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Security/Development
rpm_sourcerpm: webauthn-ble-1.0.6-1.src.rpm
location_href: armv7l/webauthn-ble-manual-tests-1.0.6-1.armv7l.rpm
checksum_type: sha256
description:
  Adaptation Layer of Web Authentication Service for BLE Authenticator (manual test)
  The webauthn-manual-tests required to use webauthn-image-viewer


pkgId: 66ab0846bca8a8d651abd30e125e950a613597c91536f607cf72e37ee66538e6
name: webrtc-audio-processing
arch: armv7l
version: 0.3.1
epoch: 0
release: 2
summary: Library for echo cancellation
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: webrtc-audio-processing-0.3.1-2.src.rpm
location_href: armv7l/webrtc-audio-processing-0.3.1-2.armv7l.rpm
checksum_type: sha256
description:
  webrtc-audio-processing is a library derived from Google WebRTC project that
  provides echo cancellation functionality. This library is used by for example
  PulseAudio to provide echo cancellation.


pkgId: 59234eafeede3c84907a436b3e15d2d93de3adb071ca772b9458fd0c0a282ba9
name: webrtc-audio-processing-devel
arch: armv7l
version: 0.3.1
epoch: 0
release: 2
summary: Development files for webrtc-audio-processing
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: webrtc-audio-processing-0.3.1-2.src.rpm
location_href: armv7l/webrtc-audio-processing-devel-0.3.1-2.armv7l.rpm
checksum_type: sha256
description:
  The webrtc-audio-processing-devel package contains libraries and header
  files for developing applications that use webrtc-audio-processing.


pkgId: 654659e76ad5110f938e52a59a461d28cc4c65e120e70a371690c0297b356706
name: wireless-regdb
arch: armv7l
version: 2013.01.11
epoch: 0
release: 0
summary: Linux wireless regulatory database
url: http://wireless.kernel.org/en/developers/Regulatory/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: wireless-regdb-2013.01.11-0.src.rpm
location_href: armv7l/wireless-regdb-2013.01.11-0.armv7l.rpm
checksum_type: sha256
description:
  This package contains the wireless regulatory database used by all
  cfg80211 based Linux wireless drivers. The wireless database being
  used is maintained by John Linville, the Linux wireless kernel maintainer
  http://wireless.kernel.org/en/developers/Regulatory/


pkgId: 8b1a15514412438fa430e3223d3618deebc9eab417073e0539f63a5eaea87178
name: wpa_supplicant
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: WPA supplicant implementation
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  wpa_supplicant is an implementation of the WPA Supplicant component,
  i.e., the part that runs in the client stations. It implements key
  negotiation with a WPA Authenticator and it controls the roaming and
  IEEE 802.11 authentication/association of the wlan driver.


pkgId: d48804a7ff85982b284729a293a7ced13fa5df9dd74fedfaec978cb584aab2f1
name: wpa_supplicant-client_tool
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: Text-based client tool for wpa_supplicant and hostapd
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-client_tool-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  Text-based frontend programs for interacting with wpa_supplicant and hostapd.
  It is used to query current status, change configuration,
  trigger events, and request interactive user input.


pkgId: e9e5c3f50266666bba3c172bc7c488df6dbf24a90c672c5aae49e7d6d1a716c4
name: wpa_supplicant-extension-TM1
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: Extension for mobile TM1
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-extension-TM1-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  Customized wpa_supplicant supporting SPRD-based boards including TM1.
  Having such ifdefs in public Tizen is really ugly, but for the sake
  of backward-compatibility, we have this subpackage. Please remove
  such variations later.


pkgId: a0344b27e8e16ec1b5bb52fd7d5e0d67966d3614c2ca65b5e66f98141ccecb39
name: wpa_supplicant-extension-TM2
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: Extension for mobile TM2
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-extension-TM2-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  Customized wpa_supplicant supporting BROADCOM-based boards including TM1.
  Having such ifdefs in public Tizen is really ugly, but for the sake
  of backward-compatibility, we have this subpackage. Please remove
  such variations later.


pkgId: 4c49555029d6784be4e3b5484b700e92b056bc55385cc4fdfa2153be5b4784b9
name: wpa_supplicant-profile_tv
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: Patched wpa_supplicant for TV
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-profile_tv-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  TV-profile somehow wants to disable WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE
  unconditionally at wpa_supplicant/wpa_supplicant.c. It should later be
  determined at runtime/boottime, not at buildtime.


pkgId: cd9cae4de6018d273db3396e10cda860479695a809fbbb5f1c2b351b2c0e8bcb
name: xdelta3
arch: armv7l
version: 3.0.11
epoch: 0
release: 1
summary: The xdelta3
url: http://xdelta.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: xdelta3-3.0.11-1.src.rpm
location_href: armv7l/xdelta3-3.0.11-1.armv7l.rpm
checksum_type: sha256
description:
  Xdelta3 is a set of tools designed to compute changes between
  binary files.  These changes (delta files) are similar to the output of the
  "diff" program, in that they may be used to store and transmit only the
  changes between files.  The "delta files" that Xdelta3 manages are
  stored in RFC3284 (VCDIFF) format.


pkgId: dd80201664ef74acf7076a5fd81052745dd0bdb281d799a3df69e2f7fb3f0305
name: xkeyboard-config
arch: armv7l
version: 2.13
epoch: 0
release: 0
summary: The X Keyboard Extension
url: http://www.freedesktop.org/Software/XKeyboardConfig
rpm_license: MIT
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: xkeyboard-config-2.13-0.src.rpm
location_href: armv7l/xkeyboard-config-2.13-0.armv7l.rpm
checksum_type: sha256
description:
  The X Keyboard Extension essentially replaces the core protocol
  definition of keyboard. The extension makes possible to clearly and
  explicitly specify most aspects of keyboard behaviour on per-key basis
  and to more closely track the logical and physical state of the
  keyboard. It also includes a number of keyboard controls designed to
  make keyboards more accessible to people with physical impairments.


pkgId: d97fe7657c4b5c87f56d001f96b89de5108c5f7e8dd91f0b96fcc184ec6b18ea
name: xml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 0
summary: Common XML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Applications/Text
rpm_sourcerpm: sgml-common-0.6.3-0.src.rpm
location_href: noarch/xml-common-0.6.3-0.noarch.rpm
checksum_type: sha256
description:
  The xml-common is a subpackage of sgml-common which contains
  a collection XML catalogs that are useful for processing XML,
  but that don't need to be included in main package.


pkgId: f64a1dc8b9d7a6323d06d9107e616666e3efaa0a17751450b3f082775d6cc510
name: xmlto
arch: armv7l
version: 0.0.28
epoch: 0
release: 0
summary: Tool for Converting XML Files to Various Formats
url: https://fedorahosted.org/xmlto/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Productivity/Publishing/XML
rpm_sourcerpm: xmlto-0.0.28-0.src.rpm
location_href: armv7l/xmlto-0.0.28-0.armv7l.rpm
checksum_type: sha256
description:
  This is a package for converting XML files to various formats using XSL
  stylesheets.  As a processor it depends on xsltproc and as a formatter
  for print output it makes use of passivetex.


pkgId: dd8945795c9595347f7c35d650acef4f7587963dd09c42ec422201beb32ec6fa
name: yum
arch: noarch
version: 3.4.3
epoch: 0
release: 0
summary: RPM package installer/updater/manager
url: http://yum.baseurl.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: yum-3.4.3-0.src.rpm
location_href: noarch/yum-3.4.3-0.noarch.rpm
checksum_type: sha256
description:
  Yum is a utility that can check for and automatically download and
  install updated RPM packages. Dependencies are obtained and downloaded
  automatically, prompting the user for permission as necessary.


pkgId: 5ad167afbc7f820f501f37b2ac374a480abe085ff0d7779ed53c9fe3675f49ea
name: zbar
arch: armv7l
version: 0.10
epoch: 0
release: 23
summary: Bar code reader
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zbar-0.10-23.src.rpm
location_href: armv7l/zbar-0.10-23.armv7l.rpm
checksum_type: sha256
description:
  A layered barcode scanning and decoding library. Supports EAN, UPC, Code 128,
  Code 39 and Interleaved 2 of 5.
  Includes applications for decoding captured barcode images and using a video
  device (eg, webcam) as a barcode scanner.


pkgId: 4f96114d20bf3313d4c945a53a857cb6a7aafc7aa37fac30a8bff045b7551097
name: zbar-devel
arch: armv7l
version: 0.10
epoch: 0
release: 23
summary: Bar code library extra development files
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zbar-0.10-23.src.rpm
location_href: armv7l/zbar-devel-0.10-23.armv7l.rpm
checksum_type: sha256
description:
  This package contains header files and additional libraries used for
  developing applications that read bar codes with this library.


pkgId: 736beafd4b2a4b5312e1c646f1a656bbc4cbf4f0600679894dee23bc16bf6e1c
name: zint
arch: armv7l
version: 2.6.7
epoch: 0
release: 2
summary: Barcode generator library
url: http://www.zint.org.uk
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zint-2.6.7-2.src.rpm
location_href: armv7l/zint-2.6.7-2.armv7l.rpm
checksum_type: sha256
description:
  Zint is a C library for encoding data in several barcode variants. The
  bundled command-line utility provides a simple interface to the library.
  Features of the library:
  - Over 50 symbologies including all ISO/IEC standards, like QR codes.
  - Unicode translation for symbologies which support Latin-1 and
    Kanji character sets.
  - Full GS1 support including data verification and automated insertion of
    FNC1 characters.
  - Support for encoding binary data including NULL (ASCII 0) characters.
  - Health Industry Barcode (HIBC) encoding capabilities.
  - Output in the following file formats: PNG, GIF, EPS, WMF, BMP, TIF, SVG.
  - Verification stage for SBN, ISBN and ISBN-13 data.


pkgId: cc074ae6300badf202a6fe42f8b052c85cb06eba6cf6d79bcdc95d5310cb408d
name: zint-devel
arch: armv7l
version: 2.6.7
epoch: 0
release: 2
summary: Library and header files for zint
url: http://www.zint.org.uk
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zint-2.6.7-2.src.rpm
location_href: armv7l/zint-devel-2.6.7-2.armv7l.rpm
checksum_type: sha256
description:
  C library and header files needed to develop applications that use
  the Zint library. The API documentation can be found on the project website:
  http://www.zint.org.uk/zintSite/Manual.aspx


pkgId: a0fdbb238204dfbbdeef5a4e0677dacb5e7be50a5c23cdeacc20803e30b6103a
name: zypper
arch: armv7l
version: 1.14.38
epoch: 0
release: 0
summary: Command line software manager using libzypp
url: http://en.opensuse.org/Zypper
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Package Management
rpm_sourcerpm: zypper-1.14.38-0.src.rpm
location_href: armv7l/zypper-1.14.38-0.armv7l.rpm
checksum_type: sha256
description:
  Zypper is a command line tool for managing software. It can be used to add
  package repositories, search for packages, install, remove, or update packages,
  install patches, hardware drivers, verify dependencies, and more.

  Zypper can be used interactively or non-interactively by user, from scripts,
  or front-ends.

  Authors:
  --------
      Jan Kupec <jkupec@suse.cz>
      Duncan Mac-Vicar <dmacvicar@suse.de>
      Martin Vidner <mvidner@suse.cz>
      Josef Reidinger <jreidinger@suse.cz>


pkgId: a98763b7e866d9fd683918003482c0f3368b804261e41151346968126f9f68ea
name: zypper-tizen-config
arch: noarch
version: 1.14.38
epoch: 0
release: 0
summary: zypper repo configuration for Tizen:Unified developers
url: http://en.opensuse.org/Zypper
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Packages
rpm_sourcerpm: zypper-1.14.38-0.src.rpm
location_href: noarch/zypper-tizen-config-1.14.38-0.noarch.rpm
checksum_type: sha256
description:
  Zypper repo configuration for Tizen:Unified developers.
  This is for Tizen device and platform development.


# files

type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/perf/scripts/python/bin/event_analyzing_sample-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/perf/scripts/python/bin/event_analyzing_sample-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-check-branches.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-get-cpus-script.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale-ftrace.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-recheck-refscale.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-remote-noreap.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/event_analyzing_sample-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/event_analyzing_sample-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/export-to-postgresql-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/export-to-postgresql-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/syscall-counts-by-pid-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/syscall-counts-by-pid-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/config_override.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/console-badness.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kcsan-collapse.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-assign-cpus.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-check-branches.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-get-cpus-script.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale-ftrace.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-refscale.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-scf.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-remote-noreap.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/perf/scripts/python/bin/event_analyzing_sample-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/perf/scripts/python/bin/event_analyzing_sample-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/perf/scripts/python/bin/syscall-counts-by-pid-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/perf/scripts/python/bin/syscall-counts-by-pid-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-4.4.35/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/coco_labels_list.txt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.2.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.2.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.3.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.3.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_result_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_result_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov10_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov10_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_track_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_obb_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_obb_decoder_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_custom/unittest_filter_custom.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_python3/unittest_filter_python3.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_reload/tensor_filter_reload_test.c


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.2


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/unittest_filter_tensorflow2_lite.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_repo_dynamicity/tensor_repo_dynamic_test.c


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/labels/google_lenet_ncsdk_caffe_1.labels


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/google_lenet_ncsdk_caffe_1.graph


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/invalid_class_custom_converter.py


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v1_1.0_224_quant.invalid


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v1_1.0_224_quant.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v2_1.0_224_quant.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/multi_person_mobilenet_v1_075_float.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/ncnn_models/squeezenet_v1.1.bin


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/ncnn_models/squeezenet_v1.1.param


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/openvino_mobilenetv2-int8-tf-0001.bin


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/openvino_mobilenetv2-int8-tf-0001.xml


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_3x4_two_input_two_output.pt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_3x4_two_input_two_output.pte


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.pt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.pte


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.tflite


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_batched.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_batched_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/bn_channels_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/bn_channels_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/bn_width_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_dilation.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_dilation.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/dropout_0_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/dropout_100_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/dropout_20_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/dropout_20_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/embedding_mixed_double_batch.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/embedding_mixed_single_batch.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/embedding_w32a32_single_batch.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_act.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_seq.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/grucell_reset_after_single_step.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/grucell_reset_after_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/lstm_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/lstmcell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_output_shape.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_output_shape_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_return_attention_scores.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_return_attention_scores_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_single_batch.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_single_batch_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_value_dim.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_value_dim_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_partial.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_partial_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/rnncell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/bidirectional_lstm_single.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/bidirectional_lstm_stacked.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/fc_unroll_stacked_clipped.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/gru_reset_after_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_gru_reset_after_return_sequence.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_gru_reset_after_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_gru_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_gru_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_disable_need_weights.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_kdim_vdim.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_self_attention.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_lstm_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_lstm_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_rnn_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_rnn_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/pooling_avg_same_padding_multi_stride.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/pooling_max_same_padding_multi_stride.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/split_axis2_split_number2.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/split_axis2_split_number4.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/split_axis3_split_number5.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_100.nnmodelgolden


type: file
name:
  /usr/lib/python3.13/site-packages/SCons/Tool/docbook/docbook-xsl-1.76.1/tools/bin/docbook-xsl-update


type: file
name:
  /usr/share/wgt-installer-ut/test_samples/smoke/ManifestDirectInstallMode/smokewgt40/bin/smokewgt40.ManifestDirectInstallMode


type: file
name:
  /usr/share/wgt-installer-ut/test_samples/smoke/ManifestDirectInstallMode_Hybrid/smokehyb12/bin/service2


type: file
name:
  /usr/share/wgt-installer-ut/test_samples/smoke/ManifestDirectInstallMode_Hybrid/smokehyb12/bin/smokehyb12.ManifestDirectInstallModeHybrid


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_none/config.xml


type: dir
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_use_decoration_invalid


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_use_decoration_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_mouse_event_not_bool/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_height_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_height_ood/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_width_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_touch_effect_not_bool/config.xml


