# packages

pkgId: ebdb8851c2da800ba059be7a759d7b5b16d8c334db81b487d7341b55a6ccd1df
name: perl-MRO-Compat
arch: x86_64
version: 0.15
epoch: 0
release: 1
summary: Routines for manipulating stashes
url: https://metacpan.org/pod/MRO::Compat
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-MRO-Compat-0.15-1.src.rpm
location_href: x86_64/perl-MRO-Compat-0.15-1.x86_64.rpm
checksum_type: sha256
description:
  The "mro" namespace provides several utilities for dealing
  with method resolution order and method caching in general
  in Perl 5.9.5 and higher.
  This module provides those interfaces for earlier
  versions of Perl (back to 5.6.0 anyways).

  It is a harmless no-op to use this module on 5.9.5+.
  That is to say, code which properly uses MRO::Compat
  will work unmodified on both older Perls and 5.9.5+.

  If you're writing a piece of software that would like
  to use the parts of 5.9.5+'s mro:: interfaces that are
  supported here, and you want compatibility
  with older Perls, this is the module for you.

  Some parts of this code will work better and/or faster
  with Class::C3::XS installed (which is an optional
  prereq of Class::C3, which is in turn a prereq of
  this package), but it's not a requirement.

  This module never exports any functions.
  All calls must be fully qualified with the mro:: prefix.

  The interface documentation here serves only as a quick
  reference of what the function basically does, and what
  differences between MRO::Compat and 5.9.5+ one should look out for.
  The main docs in 5.9.5's mro are the real interface docs,
  and contain a lot of other useful information.


pkgId: 84e20aad947e146e52c476426ee9d1ce50c802b06bfe3c81cbc2fed770ea2cde
name: perl-Module-Runtime
arch: x86_64
version: 0.016
epoch: 0
release: 1
summary: runtime module handling
url: https://metacpan.org/pod/Module::Runtime
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Module-Runtime-0.016-1.src.rpm
location_href: x86_64/perl-Module-Runtime-0.016-1.x86_64.rpm
checksum_type: sha256
description:
  The functions exported by this module deal with runtime handling of Perl modules,
  which are normally handled at compile time. This module avoids using any other modules,
  so that it can be used in low-level infrastructureb.

  The parts of this module that work with module names apply the same syntax
  that is used for barewords in Perl source. In principle this syntax can
  vary between versions of Perl, and this module applies the syntax of
  the Perl on which it is running. In practice the usable syntax hasn't changed yet.
  There's some intent for Unicode module names to be supported in the future,
  but this hasn't yet amounted to any consistent facility.

  The functions of this module whose purpose is to load modules include workarounds
  for three old Perl core bugs regarding require. These workarounds are applied on any Perl version
  where the bugs exist, except for a case where one of the bugs cannot be adequately worked around in pure Perl.


pkgId: 57bad524aa0fce77fe5ea01e8c0fbf7ad61bb8f0d540c1b829fc1affc15188fd
name: perl-Net-DBus
arch: x86_64
version: 1.2.0
epoch: 0
release: 1
summary: Perl extension for the DBus message system
url: http://search.cpan.org/dist/Net-DBus/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Net-DBus-1.2.0-1.src.rpm
location_href: x86_64/perl-Net-DBus-1.2.0-1.x86_64.rpm
checksum_type: sha256
description:
  Net::DBus provides a Perl API for the DBus message system. The DBus Perl
  interface is currently operating against the 0.32 development version of
  DBus, but should work with later versions too, providing the API changes
  have not been too drastic.

  Users of this package are either typically, service providers in which case
  the the Net::DBus::Service manpage and the Net::DBus::Object manpage
  modules are of most relevance, or are client consumers, in which case the
  Net::DBus::RemoteService manpage and the Net::DBus::RemoteObject manpage
  are of most relevance.


pkgId: 32fb5ccd968113ac8a5ba1c99fa772105c5db2b6a2b0b0946a9f34dc33250563
name: perl-Package-Stash
arch: x86_64
version: 0.40
epoch: 0
release: 1
summary: Routines for manipulating stashes
url: https://metacpan.org/pod/Package::Stash
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Package-Stash-0.40-1.src.rpm
location_href: x86_64/perl-Package-Stash-0.40-1.x86_64.rpm
checksum_type: sha256
description:
  Manipulating stashes (Perl's symbol tables) is occasionally
  necessary, but incredibly messy, and easy to get wrong.
  This module hides all of that behind a simple API.

  NOTE: Most methods in this class require a variable specification
  that includes a sigil. If this sigil is absent, it is assumed
  to represent the IO slot.

  Due to limitations in the typeglob API available to perl code,
  and to typeglob manipulation in perl being quite slow, this module
  provides two implementations - one in pure perl, and one using XS.
  The XS implementation is to be preferred for most usages; the pure
  perl one is provided for cases where XS modules are not a possibility.
  The current implementation in use can be set by setting
  $ENV{PACKAGE_STASH_IMPLEMENTATION} or $Package::Stash::IMPLEMENTATION
  before loading Package::Stash (with the environment variable
  taking precedence), otherwise, it will use the XS implementation
  if possible, falling back to the pure perl one.


pkgId: bd93ea857aa8b20bdea5b7c5faf97bcbd4491709978962f6feb28b50724df1da
name: perl-Params-ValidationCompiler
arch: x86_64
version: 0.31
epoch: 0
release: 1
summary: Build an optimized subroutine parameter validator once, use it forever
url: https://metacpan.org/pod/Params::ValidationCompiler
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Params-ValidationCompiler-0.31-1.src.rpm
location_href: x86_64/perl-Params-ValidationCompiler-0.31-1.x86_64.rpm
checksum_type: sha256
description:
  This module creates a customized, highly efficient
  parameter checking subroutine. It can handle named
  or positional parameters, and can return the
  parameters as key/value pairs or a list of values.

  In addition to type checks, it also supports
  parameter defaults, optional parameters, and
  extra "slurpy" parameters.


pkgId: 5c63ce149d09c0c6928258d559f2702333401806ce88e97c098829996d4ff687
name: perl-Path-Tiny
arch: x86_64
version: 0.150
epoch: 0
release: 0
summary: File path utility
url: https://metacpan.org/release/Path-Tiny
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Path-Tiny-0.150-0.src.rpm
location_href: x86_64/perl-Path-Tiny-0.150-0.x86_64.rpm
checksum_type: sha256
description:
  This module provides a small, fast utility for working with file paths. It
  is friendlier to use than File::Spec and provides easy access to functions
  from several other core file handling modules. It aims to be smaller and
  faster than many alternatives on CPAN, while helping people do many common
  things in consistent and less error-prone ways.

  Path::Tiny does not try to work for anything except Unix-like and Win32
  platforms. Even then, it might break if you try something particularly
  obscure or tortuous. (Quick! What does this mean:
  '///../../..//./././a//b/.././c/././'? And how does it differ on Win32?)

  All paths are forced to have Unix-style forward slashes. Stringifying the
  object gives you back the path (after some clean up).

  File input/output methods 'flock' handles before reading or writing, as
  appropriate (if supported by the platform and/or filesystem).

  The '*_utf8' methods ('slurp_utf8', 'lines_utf8', etc.) operate in raw
  mode. On Windows, that means they will not have CRLF translation from the
  ':crlf' IO layer. Installing Unicode::UTF8 0.58 or later will speed up
  '*_utf8' situations in many cases and is highly recommended. Alternatively,
  installing PerlIO::utf8_strict 0.003 or later will be used in place of the
  default ':encoding(UTF-8)'.

  This module depends heavily on PerlIO layers for correct operation and thus
  requires Perl 5.008001 or later.


pkgId: cb233307ac265fd731bcd7afd0210fd8468a54877deedba8fbafc155e02d2893
name: perl-Specio
arch: x86_64
version: 0.48
epoch: 0
release: 1
summary: Base class for type libraries
url: https://metacpan.org/pod/Specio::Exporter
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Specio-0.48-1.src.rpm
location_href: x86_64/perl-Specio-0.48-1.x86_64.rpm
checksum_type: sha256
description:
  Inheriting from this package makes your package a type exporter.
  By default, types defined in a package are never visible outside
  of the package. When you inherit from this package, all the types
  you define internally become available via exports.

  The exported types are available through the importing package's t subroutine.

  By default, types your package imports are not re-exported:

   package MyApp::Type::Library;

   use parent 'Specio::Exporter';

   use Specio::Declare;
   use Specio::Library::Builtins;

  In this case, the types provided by Specio::Library::Builtins are not
  exported to packages which use MyApp::Type::Library.

  You can explicitly ask for types to be re-exported:

    package MyApp::Type::Library;

    use parent 'Specio::Exporter';

    use Specio::Declare;
    use Specio::Library::Builtins -reexport;

  In this case, packages which use MyApp::Type::Library will get
  all the types from Specio::Library::Builtins as well as any
  types defined in MyApp::Type::Library.


pkgId: 617518b291f317cec7606e2e1a1d80ea43c8353bf5d82d370299ebb8686144fb
name: perl-Sub-Exporter-Progressive
arch: x86_64
version: 0.001013
epoch: 0
release: 1
summary: Only use Sub::Exporter if you need it
url: https://metacpan.org/pod/Sub::Exporter::Progressive
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Sub-Exporter-Progressive-0.001013-1.src.rpm
location_href: x86_64/perl-Sub-Exporter-Progressive-0.001013-1.x86_64.rpm
checksum_type: sha256
description:
  Sub::Exporter is an incredibly powerful module, but with that power
  comes great responsibility, er- as well as some runtime penalties.
  This module is a Sub::Exporter wrapper that will let your users just
  use Exporter if all they are doing is picking exports, but use Sub::Exporter
  if your users try to use Sub::Exporter's more advanced features,
  like renaming exports, if they try to use them.

  Note that this module will export @EXPORT, @EXPORT_OK and %EXPORT_TAGS
  package variables for Exporter to work. Additionally, if your package
  uses advanced Sub::Exporter features like currying, this module will
  only ever use Sub::Exporter, so you might as well use it directly.


pkgId: 9ec5fa6f60ebb5b5cdf01c56a750d2249e912039de62876f8dd381f1542a0b3d
name: perl-Sub-Identify
arch: x86_64
version: 0.14
epoch: 0
release: 1
summary: Retrieve names of code references
url: https://metacpan.org/pod/Sub::Identify
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Sub-Identify-0.14-1.src.rpm
location_href: x86_64/perl-Sub-Identify-0.14-1.x86_64.rpm
checksum_type: sha256
description:
  Sub::Identify allows you to retrieve the real name of code references.
  It provides six functions, all of them taking a code reference.
  sub_name returns the name of the code reference passed as an argument
  (or __ANON__ if it's an anonymous code reference), stash_name
  returns its package, and sub_fullname returns the concatenation of the two.

  get_code_info
  returns a list of two elements, the package and the subroutine name
  (in case of you want both and are worried by the speed.)

  In case of subroutine aliasing, those functions always return the original name.
  get_code_location returns a two-element list containing the file name
  and the line number where the subroutine has been defined.

  is_sub_constant returns a boolean value indicating whether
  the subroutine is a constant or not.


pkgId: 8f7a6038cea4d5c19038c1cc10e0547a6203b8be1a09bf51b965db4ca725b12e
name: perl-Switch
arch: noarch
version: 2.17
epoch: 0
release: 1
summary: A switch statement for Perl
url: http://search.cpan.org/dist/Switch/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Switch-2.17-1.src.rpm
location_href: noarch/perl-Switch-2.17-1.noarch.rpm
checksum_type: sha256
description:
  The Switch.pm module implements a generalized case mechanism that covers
  most (but not all) of the numerous possible combinations of switch and case
  values described above.

  The module augments the standard Perl syntax with two new control
  statements: 'switch' and 'case'. The 'switch' statement takes a single
  scalar argument of any type, specified in parentheses. 'switch' stores this
  value as the current switch value in a (localized) control variable. The
  value is followed by a block which may contain one or more Perl statements
  (including the 'case' statement described below). The block is
  unconditionally executed once the switch value has been cached.


pkgId: a365b29c10e8e05ea8cce10ad3ec68fe7a433d632f1dd7fb01252d2a90ee7c37
name: perl-Term-Table
arch: x86_64
version: 0.023
epoch: 0
release: 0
summary: Format a header and rows into a table
url: https://metacpan.org/release/Term-Table
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Term-Table-0.023-0.src.rpm
location_href: x86_64/perl-Term-Table-0.023-0.x86_64.rpm
checksum_type: sha256
description:
  This is used by some failing tests to provide diagnostics about what has
  gone wrong. This module is able to format rows of data into tables.


pkgId: 8079633cd1f4ba340b1eb92dd6814686e8e8aed39cd2f7ce46bf0b7a41542703
name: perl-Test2-Suite
arch: x86_64
version: 1.302216
epoch: 0
release: 0
summary: Distribution with a rich set of tools built upon the Test2 framework
url: https://metacpan.org/release/Test2-Suite
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Test2-Suite-1.302216-0.src.rpm
location_href: x86_64/perl-Test2-Suite-1.302216-0.x86_64.rpm
checksum_type: sha256
description:
  Rich set of tools, plugins, bundles, etc built upon the Test2 testing
  library. If you are interested in writing tests, this is the distribution
  for you.


pkgId: ce318ea7591f72796730c556629fb1ce5565684feea67fc7293dd8447adee75e
name: perl-Try-Tiny
arch: x86_64
version: 0.32
epoch: 0
release: 1
summary: Minimal try/catch with proper preservation of $@
url: https://metacpan.org/pod/Try::Tiny
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Try-Tiny-0.32-1.src.rpm
location_href: x86_64/perl-Try-Tiny-0.32-1.x86_64.rpm
checksum_type: sha256
description:
  This module provides bare bones try/catch/finally statements that are
  designed to minimize common mistakes with eval blocks, and NOTHING else.

  This is unlike TryCatch which provides a nice syntax and avoids adding
  another call stack layer, and supports calling return from the try block
  to return from the parent subroutine. These extra features come
  at a cost of a few dependencies, namely Devel::Declare and Scope::Upper
  which are occasionally problematic, and the additional catch filtering
  uses Moose type constraints which may not be desirable either.

  The main focus of this module is to provide simple and reliable error
  handling for those having a hard time installing TryCatch, but who still
  want to write correct eval blocks without 5 lines of boilerplate each time.

  It's designed to work as correctly as possible in light of the various
  pathological edge cases (see "BACKGROUND") and to be compatible with
  any style of error values (simple strings, references, objects, overloaded
  objects, etc).

  If the try block dies, it returns the value of the last statement executed
  in the catch block, if there is one. Otherwise, it returns undef in scalar
  context or the empty list in list context. The following examples
  all assign "bar" to $x:

  my $x = try { die "foo" } catch { "bar" };
  my $x = try { die "foo" } || "bar";
  my $x = (try { die "foo" }) // "bar";

   my $x = eval { die "foo" } || "bar";
   You can add finally blocks, yielding the following:

   my $x;
   try { die 'foo' } finally { $x = 'bar' };
   try { die 'foo' } catch { warn "Got a die: $_" } finally { $x = 'bar' };

   finally blocks are always executed making them suitable for cleanup code
   which cannot be handled using local. You can add as many finally blocks
   to a given try block as you like.

   Note that adding a finally block without a preceding catch block suppresses
   any errors. This behaviour is consistent with using a standalone eval,
   but it is not consistent with try/finally patterns found in other programming
   languages, such as Java, Python, Javascript or C#. If you learned
   the try/finally pattern from one of these languages, watch out for this.


pkgId: 27d78b7689cf50d8db2d2fa18bb7823f6f72dc7d4610d6411c22da7f30b09886
name: perl-Variable-Magic
arch: x86_64
version: 0.64
epoch: 0
release: 1
summary: Associate user-defined magic to variables from Perl.
url: https://metacpan.org/pod/Variable::Magic
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Variable-Magic-0.64-1.src.rpm
location_href: x86_64/perl-Variable-Magic-0.64-1.x86_64.rpm
checksum_type: sha256
description:
  Magic is Perl's way of enhancing variables. This mechanism
  lets the user add extra data to any variable and hook
  syntactical operations (such as access, assignment or destruction)
  that can be applied to it. With this module, you can add
  your own magic to any variable without having to write a single line of XS.

  You'll realize that these magic variables look a lot like tied variables.
  It is not surprising, as tied variables are implemented as a special
  kind of magic, just like any 'irregular' Perl variable : scalars like $!,
  $( or $^W, the %ENV and %SIG hashes, the @ISA array, vec() and substr()
  lvalues, threads::shared variables... They all share the same underlying
  C API, and this module gives you direct access to it.


pkgId: ff5406cd39f8ccddd4e89d9008180079dc506757aef0cc1773bcf16ce6cb383a
name: perl-XML-LibXML
arch: x86_64
version: 2.0210
epoch: 0
release: 0
summary: Perl Binding for libxml2
url: http://search.cpan.org/dist/XML-LibXML/
rpm_license: Artistic License ..
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-LibXML-2.0210-0.src.rpm
location_href: x86_64/perl-XML-LibXML-2.0210-0.x86_64.rpm
checksum_type: sha256
description:
  This module implements a Perl interface to the Gnome libxml2 library which
  provides interfaces for parsing and manipulating XML files. This module allows
  Perl programmers to make use of the highly capable validating XML parser and
  the high performance DOM implementation.

  Authors:
  	Matt Sergeant, Christian Glahn, Petr Pajas


pkgId: e89a6c47888360bf2abd54895f7766118d6164518a8df32c856e7b00785ad7fc
name: perl-XML-NamespaceSupport
arch: x86_64
version: 1.12
epoch: 0
release: 0
summary: Simple Generic Namespace Processor
url: http://search.cpan.org/dist/XML-NamespaceSupport/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-NamespaceSupport-1.12-0.src.rpm
location_href: x86_64/perl-XML-NamespaceSupport-1.12-0.x86_64.rpm
checksum_type: sha256
description:
  This module offers a simple to process namespaced XML names (unames) from
  within any application that may need them. It also helps maintain a prefix
  to namespace URI map, and provides a number of basic checks.

  The model for this module is SAX2's NamespaceSupport class, readable at
  http://www.saxproject.org/namespaces.html It adds a few perlisations where
  we thought it appropriate.


pkgId: fe9edcbd0a4ccbf0dcc52e9a781b5fc76f5903e244d14c21b5fd8396a21da1b1
name: perl-XML-SAX
arch: x86_64
version: 1.02
epoch: 0
release: 6
summary: XML::SAX Perl Module
url: http://www.cpan.org/modules/by-module/XML/
rpm_license: Artistic License ..
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-SAX-1.02-6.src.rpm
location_href: x86_64/perl-XML-SAX-1.02-6.x86_64.rpm
checksum_type: sha256
description:
  XML::SAX consists of several framework classes for using and building
  Perl SAX2 XML parsers, filters, and drivers. It is designed around the
  need to be able to "plug in" different SAX parsers to an application
  without requiring programmer intervention. Those of you familiar with
  the DBI will be right at home. Some of the designs come from the Java
  JAXP specification (SAX part), only without the javaness.


pkgId: 2947d3f48df9dcc526cab1080af2ad1c859e94852a8f15c88470496ab2140655
name: perl-XML-SAX-Base
arch: x86_64
version: 1.09
epoch: 0
release: 0
summary: Base class SAX Drivers and Filters
url: http://search.cpan.org/dist/XML-SAX-Base/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-SAX-Base-1.09-0.src.rpm
location_href: x86_64/perl-XML-SAX-Base-1.09-0.x86_64.rpm
checksum_type: sha256
description:
  This module has a very simple task - to be a base class for PerlSAX drivers
  and filters. It's default behaviour is to pass the input directly to the
  output unchanged. It can be useful to use this module as a base class so
  you don't have to, for example, implement the characters() callback.

  The main advantages that it provides are easy dispatching of events the
  right way (ie it takes care for you of checking that the handler has
  implemented that method, or has defined an AUTOLOAD), and the guarantee
  that filters will pass along events that they aren't implementing to
  handlers downstream that might nevertheless be interested in them.


pkgId: 4463c22a798b434451c7eaf67eb9a728f37e9ffd7d17bbc67942fd58e83b6c5b
name: perl-XML-Twig
arch: x86_64
version: 3.52
epoch: 0
release: 1
summary: Tree interface to XML documents
url: http://search.cpan.org/dist/XML::Twig
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-Twig-3.52-1.src.rpm
location_href: x86_64/perl-XML-Twig-3.52-1.x86_64.rpm
checksum_type: sha256
description:
  XML::Twig is (yet another!) XML transformation module.

  Its strong points: can be used to process huge documents while still
  being in tree mode; not bound by DOM or SAX, so it is very perlish and
  offers a very comprehensive set of methods; simple to use; DWIMs as
  much as possible

  What it doesn't offer: full SAX support (it can export SAX, but only
  reads XML), full XPath support (unless you use XML::Twig::XPath), nor
  DOM support.

  Other drawbacks: it is a big module, and with over 500 methods
  available it can be a bit overwhelming. A good starting point is the
  tutorial at http://xmltwig.com/xmltwig/tutorial/index.html. In fact the
  whole XML::Twig page at http://xmltwig.com/xmltwig/ has plenty of
  information to get you started with XML::Twig


pkgId: 2f4d5fe0675e2b313bfa32b084dfde2d33b1c8a31d2f2c2594776b05bce899c3
name: perl-YAML
arch: x86_64
version: 1.31
epoch: 0
release: 0
summary: YAML Ain't Markup Language (tm)
url: http://search.cpan.org/dist/YAML/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-YAML-1.31-0.src.rpm
location_href: x86_64/perl-YAML-1.31-0.x86_64.rpm
checksum_type: sha256
description:
  The YAML.pm module implements a YAML Loader and Dumper based on the YAML
  1.0 specification. the http://www.yaml.org/spec/ manpage

  YAML is a generic data serialization language that is optimized for human
  readability. It can be used to express the data structures of most modern
  programming languages. (Including Perl!!!)

  For information on the YAML syntax, please refer to the YAML specification.


pkgId: e5730877604b68e3e4abf7b87e7db85b1462a90821ce4cc8ae7b489105135e0d
name: perl-namespace-autoclean
arch: x86_64
version: 0.31
epoch: 0
release: 1
summary: Keep imports out of your namespace
url: https://metacpan.org/pod/namespace::autoclean
rpm_license: perl_5
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-namespace-autoclean-0.31-1.src.rpm
location_href: x86_64/perl-namespace-autoclean-0.31-1.x86_64.rpm
checksum_type: sha256
description:
  When you import a function into a Perl package, it will naturally also be available as a method.
  The namespace::autoclean pragma will remove all imported symbols at the end of the current package's
  compile cycle. Functions called in the package itself will still be bound by their name,
  but they won't show up as methods on your class or instances.
  This module is very similar to namespace::clean, except it will clean all imported functions,
  no matter if you imported them before or after you used the pragma.
  It will also not touch anything that looks like a method.
  If you're writing an exporter and you want to clean up after yourself (and your peers),
  you can use the -cleanee switch to specify what package to clean:

  package My::MooseX::namespace::autoclean;
  use strict;

  use namespace::autoclean (); # no cleanup, just load

  sub import {
      namespace::autoclean->import(
        -cleanee => scalar(caller),
      );
  }


pkgId: 88e571bf477e9a2b8a90d3aafc933a2f4b2c085889d0a3568b8bb0453ddbea3a
name: perl-namespace-clean
arch: x86_64
version: 0.27
epoch: 0
release: 1
summary: Keep imports and functions out of your namespace
url: https://metacpan.org/pod/namespace::clean
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-namespace-clean-0.27-1.src.rpm
location_href: x86_64/perl-namespace-clean-0.27-1.x86_64.rpm
checksum_type: sha256
description:
  Keeping packages clean
  When you define a function, or import one, into a Perl package,
  it will naturally also be available as a method. This does not
  per se cause problems, but it can complicate subclassing and,
  for example, plugin classes that are included via multiple
  inheritance by loading them as base classes.

  The namespace::clean pragma will remove all previously declared
  or imported symbols at the end of the current package's compile cycle.
  Functions called in the package itself will still be bound by their name,
  but they won't show up as methods on your class or instances.

  By unimporting via no you can tell namespace::clean to start
  collecting functions for the next use namespace::clean; specification.

  You can use the -except flag to tell namespace::clean that you don't
  want it to remove a certain function or method. A common use would be
  a module exporting an import method along with some functions:


pkgId: 11c6de6932153ce8318e90649d92223de667d46b5af4938b07638289b28ffa16
name: prelink
arch: x86_64
version: 20130503
epoch: 0
release: 0
summary: An ELF Prelinking Utility
url: http://people.redhat.com/jakub/prelink/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: prelink-20130503-0.src.rpm
location_href: x86_64/prelink-20130503-0.x86_64.rpm
checksum_type: sha256
description:
  The prelink program is a utility that modifies shared libraries and
  executables in the ELF format so that far less relocations need to be
  resolved at run time.  This decreases program start-up time.

  Be aware that prelink can modify all libraries and executables on your
  system. Applications which monitor changes in files or RPM itself
  will no longer work.


pkgId: 9ed4e8375068d84011c89ed56a859b6c177eaa8e38062947d040c8c0c3e46290
name: privilege-verifier
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Verification Utility
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/privilege-verifier-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Verifier Utility provides functions to verify privilege information of packages to be installed.


pkgId: 387fdedc7a2e4232120e613c97b85752e8f8bb938414b9218e3ddbc39334f3b7
name: protobuf
arch: x86_64
version: 33.1
epoch: 0
release: 1
summary: Protocol Buffers - Google's data interchange format
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: x86_64/protobuf-33.1-1.x86_64.rpm
checksum_type: sha256
description:
  Protocol Buffers are a way of encoding structured data in an efficient
  yet extensible format. Google uses Protocol Buffers for almost all of
  its internal RPC protocols and file formats.

  Protocol buffers are a flexible, efficient, automated mechanism for
  serializing structured data – think XML, but smaller, faster, and
  simpler. You define how you want your data to be structured once, then
  you can use special generated source code to easily write and read
  your structured data to and from a variety of data streams and using a
  variety of languages. You can even update your data structure without
  breaking deployed programs that are compiled against the "old" format.


pkgId: b188e7f3ac93869255a794b9eb5d9d7c82e6971726b184f826c5e219314d9167
name: protobuf-lite
arch: x86_64
version: 33.1
epoch: 0
release: 1
summary: Protocol Buffers LITE_RUNTIME libraries
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: x86_64/protobuf-lite-33.1-1.x86_64.rpm
checksum_type: sha256
description:
  Protocol Buffers built with optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: f4fdebbb6232bbab1264ce0a1859a59ab1b49bb830e8f12460461080a65f626b
name: protobuf-lite-devel
arch: x86_64
version: 33.1
epoch: 0
release: 1
summary: Protocol Buffers LITE_RUNTIME development libraries
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: x86_64/protobuf-lite-devel-33.1-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 5c3f45b3e66321dce2c1e05e9246a35f168e4f57f02d6f12ecbb2780b288975f
name: protobuf-lite-static
arch: x86_64
version: 33.1
epoch: 0
release: 1
summary: Static development files for protobuf-lite
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: x86_64/protobuf-lite-static-33.1-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains static development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: db24ff376ccc4d52ad561f07b778fc5abc8851687a0ff7f608562545ffe9878b
name: psmisc
arch: x86_64
version: 23.7
epoch: 0
release: 1
summary: Utilities for managing processes on your system
url: http://sourceforge.net/projects/psmisc/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: psmisc-23.7-1.src.rpm
location_href: x86_64/psmisc-23.7-1.x86_64.rpm
checksum_type: sha256
description:
  The psmisc package contains utilities for managing processes on your
  system: pstree, killall and fuser.  The pstree command displays a tree
  structure of all of the running processes on your system.  The killall
  command sends a specified signal (SIGTERM if nothing is specified) to
  processes identified by name.  The fuser command identifies the PIDs of
  processes that are using specified files or filesystems.


pkgId: 631dddd1efeb596c9b6073cb707e7974f4b7235eae52c5759cd48f1fb19e1ea3
name: pulseaudio
arch: x86_64
version: 15.0
epoch: 0
release: 41
summary: Improved Linux sound server
url: http://pulseaudio.org
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Audio
rpm_sourcerpm: pulseaudio-15.0-41.src.rpm
location_href: x86_64/pulseaudio-15.0-41.x86_64.rpm
checksum_type: sha256
description:
  PulseAudio is a sound server for Linux and other Unix like operating
  systems. It is intended to be an improved drop-in replacement for the
  Enlightened Sound Daemon (ESOUND).


pkgId: a6371fe7f438dc195f9ec8bbb6657355adbe88ca87f7861f37112a7ac94ca92d
name: pulseaudio-utils
arch: x86_64
version: 15.0
epoch: 0
release: 41
summary: Command line tools for the PulseAudio sound server
url: http://pulseaudio.org
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Audio
rpm_sourcerpm: pulseaudio-15.0-41.src.rpm
location_href: x86_64/pulseaudio-utils-15.0-41.x86_64.rpm
checksum_type: sha256
description:
  These tools provide command line access to various features of the
  PulseAudio sound server. Included tools are:
  pabrowse - Browse available PulseAudio servers on the local network.
  paplay - Playback a WAV file via a PulseAudio sink.
  pacat - Cat raw audio data to a PulseAudio sink.
  parec - Cat raw audio data from a PulseAudio source.
  pacmd - Connect to PulseAudio's built-in command line control interface.
  pactl - Send a control command to a PulseAudio server.
  padsp - /dev/dsp wrapper to transparently support OSS applications.
  pax11publish - Store/retrieve PulseAudio default server/sink/source
  settings in the X11 root window.


pkgId: bf789860f0eee54f0f47e1e5c804e19be2b8723f99febd5a7adf5f7dd8b7f411
name: pygobject2
arch: x86_64
version: 3.55.0
epoch: 0
release: 1
summary: Python bindings for GObject
url: http://www.pygtk.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: pygobject2-3.55.0-1.src.rpm
location_href: x86_64/pygobject2-3.55.0-1.x86_64.rpm
checksum_type: sha256
description:
  The pygobject2 package provides a convenient wrapper for the GObject library
  for use in Python programs. This is version 3.55.0, an upgrade from the
  Tizen base version 3.46.0.


pkgId: 5d196ac39d4fbd6dfea12eb8719c2485533b1d7f26ea26c4706b7ff23c100e87
name: pygobject2-devel
arch: x86_64
version: 3.55.0
epoch: 0
release: 1
summary: Development files for building add-on libraries
url: http://www.pygtk.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: pygobject2-3.55.0-1.src.rpm
location_href: x86_64/pygobject2-devel-3.55.0-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains files required to build wrappers for pygobject2-based
  libraries such as pygtk2.


pkgId: 94e3e305e745463aee506b22f9fad40efdac0703c29c53a2af53703d93a25d7a
name: python-Cheetah
arch: x86_64
version: 2.4.4
epoch: 0
release: 0
summary: Cheetah is a template engine and code generation tool
url: http://www.cheetahtemplate.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-Cheetah-2.4.4-0.src.rpm
location_href: x86_64/python-Cheetah-2.4.4-0.x86_64.rpm
checksum_type: sha256
description:
  Cheetah is an open source template engine and code generation tool.

  It can be used standalone or combined with other tools and frameworks. Web
  development is its principle use, but Cheetah is very flexible and is also being
  used to generate C++ game code, Java, sql, form emails and even Python code.


pkgId: cabcd00b71ef98bb3e36b23968f2686bc01aef60743b32cb3108b0030c6686d9
name: python-PyYAML
arch: x86_64
version: 3.10
epoch: 0
release: 0
summary: YAML parser and emitter for Python
url: http://pyyaml.org/wiki/PyYAML
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-PyYAML-3.10-0.src.rpm
location_href: x86_64/python-PyYAML-3.10-0.x86_64.rpm
checksum_type: sha256
description:
  YAML is a data serialization format designed for human readability
  and interaction with scripting languages.  PyYAML is a YAML parser
  and emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: 3fe8cfc5d5405f28f1e1b85a43835eee88078878c582aee47e7288fce1014e7f
name: python-ZSI
arch: noarch
version: 2.1.a1
epoch: 0
release: 0
summary: Zolera SOAP Infrastructure
url: http://pywebsvcs.sf.net
rpm_license: Python
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-ZSI-2.1.a1-0.src.rpm
location_href: noarch/python-ZSI-2.1.a1-0.noarch.rpm
checksum_type: sha256
description:
  ZSI, the Zolera SOAP Infrastructure, is a pure-Python module that
  provides an implementation of SOAP messaging, as described in SOAP 1.1
  Specification (see http://www.w3.org/TR/soap).  It can also be used to
  build applications using SOAP Messages with Attachments (see
  http://www.w3.org/TR/SOAP-attachments).  ZSI is intended to make it
  easier to write web services in Python.

  In particular, ZSI parses and generates SOAP messages, and converts
  between native Python datatypes and SOAP syntax. Simple dispatch and
  invocation methods are supported.  There are no known bugs.  Its only
  known limitation is that it cannot handle multi-dimensional arrays.


pkgId: bf4b68a9132f8201509a3629dc387546843836f213652cbcb0d9bc130c759ae6
name: python-coverage
arch: x86_64
version: 3.6
epoch: 0
release: 0
summary: Code coverage measurement for Python
url: http://nedbatchelder.com/code/coverage
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-coverage-3.6-0.src.rpm
location_href: x86_64/python-coverage-3.6-0.x86_64.rpm
checksum_type: sha256
description:
  Coverage.py measures code coverage, typically during test execution. It uses
  the code analysis tools and tracing hooks provided in the Python standard
  library to determine which lines are executable, and which have been executed.


pkgId: 11e230ce89f08da58875323b889edfa163448529d57edbdb0b60fa9a3674ab42
name: python-cython
arch: x86_64
version: 0.29.21
epoch: 0
release: 0
summary: The Cython compiler for writing C extensions for the Python language
url: http://www.cython.org
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-cython-0.29.21-0.src.rpm
location_href: x86_64/python-cython-0.29.21-0.x86_64.rpm
checksum_type: sha256
description:
  The Cython language makes writing C extensions for the Python language as
  easy as Python itself.  Cython is a source code translator based on the
  well-known Pyrex, but supports more cutting edge functionality and
  optimizations.

  The Cython language is very close to the Python language (and most Python
  code is also valid Cython code), but Cython additionally supports calling C
  functions and declaring C types on variables and class attributes. This
  allows the compiler to generate very efficient C code from Cython code.

  This makes Cython the ideal language for writing glue code for external C
  libraries, and for fast C modules that speed up the execution of Python
  code.


pkgId: 4d2d6a4afe0033a4cd86481b786dafdea9bd2eb3e443cbfcae3dd61f581c0d25
name: python-distribute
arch: noarch
version: 0.6.32
epoch: 0
release: 0
summary: Easily download, build, install, upgrade, and uninstall Python packages
url: http://packages.python.org/distribute
rpm_license: Python-2.0 or ZPL-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-distribute-0.6.32-0.src.rpm
location_href: noarch/python-distribute-0.6.32-0.noarch.rpm
checksum_type: sha256
description:
  Distribute is a fork of the Setuptools project.

  Distribute is intended to replace Setuptools as the standard method for working
  with Python module distributions.


pkgId: a4e3f452f77f2b9eb1e22fb87ca1a0d5562fcac59b1466dbdfd4caefcd5d0668
name: python-gobject-cairo
arch: x86_64
version: 3.36.1
epoch: 0
release: 0
summary: Python bindings for GObject -- Cairo bindings
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-gobject-3.36.1-0.src.rpm
location_href: x86_64/python-gobject-cairo-3.36.1-0.x86_64.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python that gives you access to
  GLib's GObjects.

  This package contains the Python Cairo bindings for GObject.


pkgId: 29c91928d9b2c5bcc5cdfe5966f2a3ec660ffdff5d07530e406bcd74a3749d63
name: python-gobject-pygtkcompat
arch: x86_64
version: 3.36.1
epoch: 0
release: 0
summary: Python bindings for GObject -- PyGTK Backwards Compatibility
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-gobject-3.36.1-0.src.rpm
location_href: x86_64/python-gobject-pygtkcompat-3.36.1-0.x86_64.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python that gives you access to
  GLib's GObjects.

  This package contains a module providing backwards compatibility to
  pygtk.


pkgId: 86f7bd2447cda3dc4068f6530b34048ec1b02301d09021ba5b3b7ab071a48f1d
name: python-gpgme
arch: x86_64
version: 0.1
epoch: 0
release: 0
summary: A Python module for working with OpenPGP messages
url: http://pypi.python.org/pypi/pygpgme
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-gpgme-0.1-0.src.rpm
location_href: x86_64/python-gpgme-0.1-0.x86_64.rpm
checksum_type: sha256
description:
  PyGPGME is a Python module that lets you sign, verify, encrypt and
  decrypt messages using the OpenPGP format.

  It is built on top of the GNU Privacy Guard and the GPGME library.


pkgId: 924e084f0376c53401c1a2d98bc9b76edb56a28beb55c09242720338ad7c5d5e
name: python-iniparse
arch: noarch
version: 0.4
epoch: 0
release: 0
summary: Python Module for Accessing and Modifying Configuration Data in INI files
url: http://code.google.com/p/iniparse/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-iniparse-0.4-0.src.rpm
location_href: noarch/python-iniparse-0.4-0.noarch.rpm
checksum_type: sha256
description:
  iniparse is an INI parser for Python which is API compatible with the
  standard library's ConfigParser, preserves structure of INI files
  (order of sections & options, indentation, comments, and blank lines
  are preserved when data is updated), and is more convenient to use.


pkgId: b89393b1511d28ae6a6406106b4e10aa0d47777b4522e87a9c9ae9771b80418e
name: python-numpy
arch: x86_64
version: 1.16.6
epoch: 0
release: 0
summary: NumPy array processing for numbers, strings, records and objects
url: http://www.numpy.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/Python
rpm_sourcerpm: python-numpy-1.16.6-0.src.rpm
location_href: x86_64/python-numpy-1.16.6-0.x86_64.rpm
checksum_type: sha256
description:
  NumPy is a general-purpose array-processing package designed to
  efficiently manipulate large multi-dimensional arrays of arbitrary
  records without sacrificing too much speed for small multi-dimensional
  arrays.  NumPy is built on the Numeric code base and adds features
  introduced by numarray as well as an extended C-API and the ability to
  create arrays of arbitrary type which also makes NumPy suitable for
  interfacing with general-purpose data-base applications.

  There are also basic facilities for discrete fourier transform,
  basic linear algebra and random number generation.


pkgId: c6216e5d4798bcd05fe06778b65a1584b884a3a62290abef5458d967cda465d3
name: python-pyOpenSSL
arch: noarch
version: 19.0.0.0
epoch: 0
release: 0
summary: Python wrapper module around the OpenSSL library
url: https://github.com/pyca/pyopenssl
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-pyOpenSSL-19.0.0.0-0.src.rpm
location_href: noarch/python-pyOpenSSL-19.0.0.0-0.noarch.rpm
checksum_type: sha256
description:
  High-level wrapper around a subset of the OpenSSL library, includes
   * SSL.Connection objects, wrapping the methods of Python's portable
     sockets
   * Callbacks written in Python
   * Extensive error-handling mechanism, mirroring OpenSSL's error codes
  ...  and much more ;)


pkgId: aa776592597a9087cb86030ccbee9d0830426d848b29795f5e20a0cb6dbee0bc
name: python-pycrypto
arch: x86_64
version: 2.6.1
epoch: 0
release: 0
summary: Cryptographic modules for Python
url: http://www.pycrypto.org/
rpm_license: Public Domain
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-pycrypto-2.6.1-0.src.rpm
location_href: x86_64/python-pycrypto-2.6.1-0.x86_64.rpm
checksum_type: sha256
description:
  The package contains:

    * Hash functions: MD2, MD4, RIPEMD, SHA256.
    * Block encryption algorithms: AES, ARC2, Blowfish, CAST, DES,
      Triple-DES, IDEA, RC5.
    * Stream encryption algorithms: ARC4, simple XOR.
    * Public-key algorithms: RSA, DSA, ElGamal, qNEW.
    * Protocols: All-or-nothing transforms, chaffing/winnowing.
    * Miscellaneous: RFC1751 module for converting 128-key keys into a
      set of English words, primality testing.
    * Some demo programs (currently all quite old and outdated).


pkgId: 068821936727456a263421c05ea3ef2d86c6138846afb9da10f90891aac7a99b
name: python-pycurl
arch: x86_64
version: 7.19.0
epoch: 0
release: 0
summary: A Python interface to libcurl
url: http://pycurl.sourceforge.net/
rpm_license: LGPL-2.1+ or MIT/X11
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-pycurl-7.19.0-0.src.rpm
location_href: x86_64/python-pycurl-7.19.0-0.x86_64.rpm
checksum_type: sha256
description:
  PycURL is a Python interface to libcurl. PycURL can be used to fetch
  objects identified by a URL from a Python program, similar to the
  urllib Python module. PycURL is mature, very fast, and supports a lot
  of features.


pkgId: 46f1d1a442ec1678a96c118a52340960238017e666a41be790cf792ddd65e7fa
name: python-sqlite
arch: x86_64
version: 2.6.3
epoch: 0
release: 0
summary: DB-API 2.0 interface for SQLite 3.x
url: http://pysqlite.googlecode.com/
rpm_license: Zlib
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-sqlite-2.6.3-0.src.rpm
location_href: x86_64/python-sqlite-2.6.3-0.x86_64.rpm
checksum_type: sha256
description:
  Python interface to SQLite 3

  pysqlite is an interface to the SQLite 3.x embedded relational database engine.
  It is almost fully compliant with the Python database API version 2.0 also
  exposes the unique features of SQLite.


pkgId: cabd26abaf90812dd4a2228c2e59f18d1198c3e74bcd8a70b281866b38f4e482
name: python-urlgrabber
arch: noarch
version: 3.9.1
epoch: 0
release: 0
summary: A high-level cross-protocol url-grabber
url: http://urlgrabber.baseurl.org/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-urlgrabber-3.9.1-0.src.rpm
location_href: noarch/python-urlgrabber-3.9.1-0.noarch.rpm
checksum_type: sha256
description:
  A high-level cross-protocol url-grabber for python supporting HTTP, FTP
  and file locations.  Features include keepalive, byte ranges, throttling,
  authentication, proxies and more.


pkgId: e315448bdd5413cc07356fc5ae46d5605b031b5b10914385dc280fd080917420
name: python3-Cheetah
arch: x86_64
version: 3.4.0.post5
epoch: 0
release: 0
summary: Cheetah is a template engine and code generation tool
url: http://www.cheetahtemplate.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python3
rpm_sourcerpm: python3-Cheetah-3.4.0.post5-0.src.rpm
location_href: x86_64/python3-Cheetah-3.4.0.post5-0.x86_64.rpm
checksum_type: sha256
description:
  Cheetah is an open source template engine and code generation tool.

  It can be used standalone or combined with other tools and frameworks. Web
  development is its principle use, but Cheetah is very flexible and is also being
  used to generate C++ game code, Java, sql, form emails and even Python3 code.


pkgId: ce2bb0959f771a83a5c47f66fccef6c6417d9672d8b0402d78a3cdaa892157f7
name: python3-PyYAML
arch: x86_64
version: 3.10
epoch: 0
release: 0
summary: YAML parser and emitter for Python3
url: http://pyyaml.org/wiki/PyYAML
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-PyYAML-3.10-0.src.rpm
location_href: x86_64/python3-PyYAML-3.10-0.x86_64.rpm
checksum_type: sha256
description:
  PyYAML for Python3

  YAML is a data serialization format designed for human readability
  and interaction with scripting languages.  PyYAML is a YAML parser
  and emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: b72bd48d99d5b558c75de31a9d173e13f7cdeead34dc44533322c332367479df
name: python3-asn1crypto
arch: x86_64
version: 1.5.1
epoch: 0
release: 0
summary: python3-asn1crypto
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Testing
rpm_sourcerpm: python3-asn1crypto-1.5.1-0.src.rpm
location_href: x86_64/python3-asn1crypto-1.5.1-0.x86_64.rpm
checksum_type: sha256
description:
  ASN.1 parser and serializer with definitions for private keys, public keys,
  certificates, CRL, OCSP, CMS, PKCS#3, PKCS#7, PKCS#8, PKCS#12, PKCS#5, X509 and TSP


pkgId: 8e684dd0d822bacda2d6e5d1419b05031b9aeb23e810d7a10c55aa64d6f28d96
name: python3-atomicwrites
arch: x86_64
version: 1.4.1
epoch: 0
release: 0
summary: Atomic file writes for Python
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-atomicwrites-1.4.1-0.src.rpm
location_href: x86_64/python3-atomicwrites-1.4.1-0.x86_64.rpm
checksum_type: sha256
description:
  Atomic file writes for python3.
  Features that distinguish it from other similar libraries:

  - Race-free assertion that the target file doesn't yet exist. This can be
    controlled with the 'overwrite' parameter.

  - High-level API that wraps a very flexible class-based API


pkgId: a880e1097daa0ee0011a3e00972512fed5b676f244c7e31e31cec876027be06f
name: python3-catkin-pkg
arch: noarch
version: 1.1.0
epoch: 0
release: 1
summary: catkin package library
rpm_license: BSD
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-catkin-pkg-1.1.0-1.src.rpm
location_href: noarch/python3-catkin-pkg-1.1.0-1.noarch.rpm
checksum_type: sha256
description:
  The pytest framework makes it easy to write small tests, yet scales to support complex functional testing for applications and libraries.


pkgId: e200a72807b7d0a8849499f2aa0751c2afc0d4122178154427e60c7a97a6856c
name: python3-cffi
arch: x86_64
version: 2.0.0
epoch: 0
release: 0
summary: Foreign Function Interface for Python calling C code
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-cffi-2.0.0-0.src.rpm
location_href: x86_64/python3-cffi-2.0.0-0.x86_64.rpm
checksum_type: sha256
description:
  Foreign Function Interface for Python calling C code. The aim of this project
  is to provide a convenient and reliable way of calling C code from Python.


pkgId: f9c3e4b9fa4769143361443e415876ea87361ae29c25d317cf35b3766cb6bdce
name: python3-cryptography
arch: x86_64
version: 2.3
epoch: 0
release: 0
summary: PyCA's cryptography library
rpm_license: Apache-2.0 or BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-cryptography-2.3-0.src.rpm
location_href: x86_64/python3-cryptography-2.3-0.x86_64.rpm
checksum_type: sha256
description:
  cryptography is a package designed to expose cryptographic primitives and
  recipes to Python developers.


pkgId: 8333fef5e895c673f00e3952e9fc3b67b0d1fa76b9a1117c3c16ef7b8ddb26b1
name: python3-distlib
arch: noarch
version: 0.4.0
epoch: 0
release: 1
summary: packaging and distribution of Python software
rpm_license: Python-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-distlib-0.4.0-1.src.rpm
location_href: noarch/python3-distlib-0.4.0-1.noarch.rpm
checksum_type: sha256
description:
  Distlib is a library which implements low-level functions that relate to packaging and distribution of Python software.


pkgId: b2cb7aada40ea7db3f8f4bcf55c8ed5ef5d6530060716a83507135be5c27a7de
name: python3-empy
arch: noarch
version: 4.2
epoch: 0
release: 0
summary: A powerful and robust template system for Python
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages
rpm_sourcerpm: python3-empy-4.2-0.src.rpm
location_href: noarch/python3-empy-4.2-0.noarch.rpm
checksum_type: sha256
description:
  EmPy is a system for embedding Python expressions and statements in template
  text; it takes an EmPy source file, processes it, and produces output.


pkgId: 8918673ec4f2def1d30f36a39c04d61f6bbc603c81f25c122f091ceefe39fa71
name: python3-gobject-cairo
arch: x86_64
version: 3.46.0
epoch: 0
release: 0
summary: Python3 bindings for GObject -- Cairo bindings
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-gobject-3.46.0-0.src.rpm
location_href: x86_64/python3-gobject-cairo-3.46.0-0.x86_64.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python3 that gives you access to
  GLib's GObjects.

  This package contains the Python3 Cairo bindings for GObject.


pkgId: 6288c66aebbd188c08203334f5d65a91f72fb6fc39df822441585daccf299858
name: python3-gobject-pygtkcompat
arch: x86_64
version: 3.46.0
epoch: 0
release: 0
summary: Python3 bindings for GObject -- PyGTK Backwards Compatibility
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-gobject-3.46.0-0.src.rpm
location_href: x86_64/python3-gobject-pygtkcompat-3.46.0-0.x86_64.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python3 that gives you access to
  GLib's GObjects.

  This package contains a module providing backwards compatibility to
  pygtk.


pkgId: 26c75e8940aac91ac782e9c14d276beba39567c8c70327862faefbdc94dfeee3
name: python3-grpcio
arch: x86_64
version: 1.76.0
epoch: 0
release: 0
summary: HTTP/2-based Remote Procedure Call implementation
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-grpcio-1.76.0-0.src.rpm
location_href: x86_64/python3-grpcio-1.76.0-0.x86_64.rpm
checksum_type: sha256
description:
  gRPC is a remote procedure call (RPC) framework. gRPC enables client
  and server applications to communicate, and enables the building of
  connected systems.


pkgId: 1eca315a206239fea4492dbe1917a03157b27bf5a95fefb75482931fcb0828d0
name: python3-hatch-fancy-pypi-readme
arch: x86_64
version: 25.1.0
epoch: 0
release: 1
summary: Hatch plugin for writing fancy PyPI readmes
url: https://github.com/hynek/hatch-fancy-pypi-readme
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-hatch-fancy-pypi-readme-25.1.0-1.src.rpm
location_href: x86_64/python3-hatch-fancy-pypi-readme-25.1.0-1.x86_64.rpm
checksum_type: sha256
description:
  This provides a Hatch metadata plugin for everyone who cares about the
  first impression of their projectâ€™s PyPI landing page. It allows you to
  define your PyPI project description in terms of concatenated fragments
  that are based on static strings, files, and most importantly: parts of
  files defined using cut-off points or regular expressions.


pkgId: 386a11d11ee6e960e5c56dc357a9290704c1b0d0b2eb4e2df9a68e988ed8a91d
name: python3-hatch-vcs
arch: x86_64
version: 0.5.0
epoch: 0
release: 1
summary: Hatch plugin for versioning with your preferred VCS
url: https://github.com/ofek/hatch-vcs
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-hatch-vcs-0.5.0-1.src.rpm
location_href: x86_64/python3-hatch-vcs-0.5.0-1.x86_64.rpm
checksum_type: sha256
description:
  This provides a plugin for Hatch that uses your preferred version control
  system (like Git) to determine project versions.


pkgId: cccede9295b895b07b9da1b348f03d7ead00707008c4da74c7fc05e40a97f01a
name: python3-idna
arch: noarch
version: 3.11
epoch: 0
release: 0
summary: Internationalized Domain Names in Applications (IDNA)
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-idna-3.11-0.src.rpm
location_href: noarch/python3-idna-3.11-0.noarch.rpm
checksum_type: sha256
description:
  A library to support the Internationalised Domain Names in
  Applications (IDNA) protocol as specified in RFC 5891
  http://tools.ietf.org/html/rfc5891. This version of the protocol
  is often referred to as \A1\B0IDNA2008\A1\B1 and can produce different
  results from the earlier standard from 2003.

  The library is also intended to act as a suitable drop-in replacement
  for the \A1\B0encodings.idna\A1\B1 module that comes with the Python standard
  library but currently only supports the older 2003 specification.


pkgId: 308b7a579029a5221038101c68607714f9498128c45a2a906e860f8f15f16fa5
name: python3-iso8601
arch: noarch
version: 2.1.0
epoch: 0
release: 0
summary: Simple module to parse ISO 8601 dates
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-iso8601-2.1.0-0.src.rpm
location_href: noarch/python3-iso8601-2.1.0-0.noarch.rpm
checksum_type: sha256
description:
  Simple module to parse ISO 8601 dates

  This module parses the most common forms of ISO 8601 date strings (e.g.
  2007-01-14T20:34:22+00:00) into datetime objects.


pkgId: ef5585c8a6310574d196299196611e0df19c1beb3cd3bbc62fc25ba24fa0c2d7
name: python3-jinja2
arch: noarch
version: 3.1.3
epoch: 0
release: 1
summary: A syntax highlighting engine written in Python3
url: https://jinja.palletsprojects.com/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-jinja2-3.1.3-1.src.rpm
location_href: noarch/python3-jinja2-3.1.3-1.noarch.rpm
checksum_type: sha256
description:
  Jinja is a fast, expressive, extensible templating engine. Special
  placeholders in the template allow writing code similar to Python
  syntax. Then the template is passed data to render the final document.


pkgId: bd4ea128d2c5b3fc733dd6751a8ce50efd3e500d69c62b12e99c72771f7223a8
name: python3-meson-python
arch: noarch
version: 0.18.0
epoch: 0
release: 0
summary: Meson Python build backend (PEP 517)
url: https://github.com/mesonbuild/meson-python
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-meson-python-0.18.0-0.src.rpm
location_href: noarch/python3-meson-python-0.18.0-0.noarch.rpm
checksum_type: sha256
description:
  meson-python is a Python build backend built on top of the Meson build system.
  It enables to use Meson for the configuration and build steps of Python
  packages. Meson is an open source build system meant to be both extremely fast,
  and, even more importantly, as user friendly as possible. meson-python is best
  suited for building Python packages containing extension modules implemented in
  languages such as C, C++, Cython, Fortran, Pythran, or Rust. Consult the
  documentation for more details.


pkgId: 9b29a06c61995da0ff9c8860ed28d598ef566148c074466df2db13b5c87c7b68
name: python3-more-itertools
arch: noarch
version: 10.8.0
epoch: 0
release: 0
summary: More routines for operating on iterables, beyond itertools
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-more-itertools-10.8.0-0.src.rpm
location_href: noarch/python3-more-itertools-10.8.0-0.noarch.rpm
checksum_type: sha256
description:
  I love itertools; it's one of the most beautiful, composable standard libs.
  Whenever I have an iteration problem, there's almost always an itertools
  routine that fits it perfectly. Sometimes, however, neither itertools nor the
  recipes included in its docs do quite what I need.

  Here I've collected several routines I've reached for but not found. Since
  they are deceptively tricky to get right, I've wrapped them up into a library.
  We've also included implementations of the recipes from the itertools
  documentation. Enjoy! Any additions are welcome; just file a pull request.


pkgId: 5c2bd37c3657e9461dc36626d1b1fd0f7549ba531fa6283762a1fbd794812f40
name: python3-netifaces
arch: x86_64
version: 0.11.0
epoch: 0
release: 0
summary: Portable network interface information
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-netifaces-0.11.0-0.src.rpm
location_href: x86_64/python3-netifaces-0.11.0-0.x86_64.rpm
checksum_type: sha256
description:
  netifaces provides a (hopefully portable-ish) way for Python programmers to
  get access to a list of the network interfaces on the local machine, and to
  obtain the addresses of those network interfaces.

  The package has been tested on Mac OS X, Windows XP, Windows Vista, Linux and
  Solaris. On Windows, it is currently not able to retrieve IPv6 addresses,
  owing to shortcomings of the Windows API.

  It should work on other UNIX-like systems provided they implement either
  getifaddrs() or support the SIOCGIFxxx socket options, although the data
  provided by the socket options is normally less complete.


pkgId: 3642257940ea4a52ea30b3caa120adab680a4cdcf8b2e5a3d1976a507215c8c2
name: python3-opencv
arch: x86_64
version: 4.7.0
epoch: 0
release: 8
summary: OpenCV Python3 Library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: opencv-4.7.0-8.src.rpm
location_href: x86_64/python3-opencv-4.7.0-8.x86_64.rpm
checksum_type: sha256
description:
  The Open Computer Vision Library (Python3) includes various algorithms for computre vision problems.


pkgId: 1f0bb422d8f98e86c626f3d4ab24571488adaea7f57a2cf64e754d1deed249c2
name: python3-pathlib2
arch: x86_64
version: 2.3.7.post1
epoch: 0
release: 0
summary: Object-oriented filesystem paths
rpm_license: MIT
rpm_vendor: tizen
rpm_group: devel/python
rpm_sourcerpm: python3-pathlib2-2.3.7.post1-0.src.rpm
location_href: x86_64/python3-pathlib2-2.3.7.post1-0.x86_64.rpm
checksum_type: sha256
description:
  pathlib2 offers a set of classes to handle filesystem paths in an
  object-oriented fashion. This is a backport of the Python 3.4+ pathlib
  module for older Python versions.


pkgId: 877fec292ea6de3de4997be56b41b7804e46f5148022a2f7a0e56a66436ecf12
name: python3-pycparser
arch: x86_64
version: 2.23
epoch: 0
release: 0
summary: C parser in Python
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-pycparser-2.23-0.src.rpm
location_href: x86_64/python3-pycparser-2.23-0.x86_64.rpm
checksum_type: sha256
description:
  pycparser is a complete parser of the C language, written in pure Python using
  the PLY parsing library. It parses C code into an AST and can serve as a
  front-end for C compilers or analysis tools.


pkgId: f0f7967c7a3305e7afe81df1be70b637005366529770436c3027a8d166a8b8ec
name: python3-pyproject-metadata
arch: noarch
version: 0.10.0
epoch: 0
release: 0
summary: PEP 621 metadata parsing
url: https://github.com/FFY00/python-pyproject-metadata
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-pyproject-metadata-0.10.0-0.src.rpm
location_href: noarch/python3-pyproject-metadata-0.10.0-0.noarch.rpm
checksum_type: sha256
description:
  Dataclass for PEP 621 metadata with support for core metadata generation.

  This project does not implement the parsing of pyproject.toml containing PEP
  621 metadata.  Instead, given a Python data structure representing PEP 621
  metadata (already parsed), it will validate this input and generate a PEP
  643-compliant metadata file (e.g. PKG-INFO).


pkgId: 8a7ca39da80a6126ed8218a2232bc557a4590d87ca0188b0cdb00bc41bb95671
name: python3-pytest-repeat
arch: noarch
version: 0.9.4
epoch: 0
release: 1
summary: pytest-repeat is a plugin for pytest
rpm_license: MPL-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-pytest-repeat-0.9.4-1.src.rpm
location_href: noarch/python3-pytest-repeat-0.9.4-1.noarch.rpm
checksum_type: sha256
description:
  pytest-repeat is a plugin for pytest that makes it easy to repeat a single test, or multiple tests, a specific number of times.


pkgId: f35a547219852bee9c6a3d14e5a0fc569c9662ba93978739428b42f6d217f679
name: python3-pytz
arch: x86_64
version: 2025.2
epoch: 0
release: 0
summary: World timezone definitions, modern and historical
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-pytz-2025.2-0.src.rpm
location_href: x86_64/python3-pytz-2025.2-0.x86_64.rpm
checksum_type: sha256
description:
  python-tz brings the Olson tz database into Python.
  This library allows accurate and cross platform timezone calculations
  using Python 2.3 or higher. It also solves the issue of ambiguous times
  at the end of daylight savings, which you can read more about in
  the Python Library Reference (datetime.tzinfo).


pkgId: 3b9eb2e8440b73245bbb2a49060be3e2ae3f86b458420684e62220073a29d71d
name: python3-sqlite
arch: x86_64
version: 0.5.4
epoch: 0
release: 0
summary: DB-API 2.0 interface for SQLite 3.x
url: https://github.com/coleifer/pysqlite3
rpm_license: Zlib
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python3-sqlite-0.5.4-0.src.rpm
location_href: x86_64/python3-sqlite-0.5.4-0.x86_64.rpm
checksum_type: sha256
description:
  Python3 interface to SQLite 3
  pysqlite is an interface to the SQLite 3.x embedded relational database engine.
  It is almost fully compliant with the Python3 database API version 2.0 also
  exposes the unique features of SQLite.


pkgId: f5f8360e81e84cc8e8b4aa9c7a293695dbd8e2008771a07b0e133638240a8756
name: re2c
arch: x86_64
version: 4.3
epoch: 0
release: 1
summary: Tool for generating C-based recognizers from regular expressions
url: https://re2c.org/
rpm_license: PD
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: re2c-4.3-1.src.rpm
location_href: x86_64/re2c-4.3-1.x86_64.rpm
checksum_type: sha256
description:
  re2c is a tool for writing fast and flexible lexers. Unlike other such
  tools, it concentrates solely on generating efficient code for matching
  regular expressions. This makes it suitable for a wide variety of
  applications. The generated scanners approach hand-crafted ones in
  terms of size and speed.


pkgId: 5fc20c5d4cff2c481de965ce91a57d6cd7d57b043dc9257ddd5eb314c055773e
name: rnnoise
arch: x86_64
version: 0
epoch: 0
release: 0.4
summary: Recurrent neural network for audio noise reduction
url: https://gitlab.xiph.org/xiph/rnnoise
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rnnoise-0-0.4.src.rpm
location_href: x86_64/rnnoise-0-0.4.x86_64.rpm
checksum_type: sha256
description:
  RNNoise is a noise suppression library based on a recurrent neural network.

  While it is meant to be used as a library, a simple command-line tool is
  provided as an example. It operates on RAW 16-bit (machine endian) mono PCM
  files sampled at 48 kHz. It can be used as:

  ./examples/rnnoise_demo <noisy speech> <output denoised>

  The output is also a 16-bit raw PCM file.


pkgId: 45445a3b07900a1db8e0289e28a0656d94663cd52e5140cd356132ccc942e8ef
name: rsync
arch: x86_64
version: 3.4.1
epoch: 0
release: 1
summary: A program for synchronizing files over a network
url: http://rsync.samba.org/
rpm_license: GPL-3.0-or-later
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: rsync-3.4.1-1.src.rpm
location_href: x86_64/rsync-3.4.1-1.x86_64.rpm
checksum_type: sha256
description:
  Rsync uses a reliable algorithm to bring remote and host files into
  sync very quickly. Rsync is fast because it just sends the differences
  in the files over the network instead of sending the complete
  files. Rsync is often used as a very powerful mirroring process or
  just as a more capable replacement for the rcp command. A technical
  report which describes the rsync algorithm is included in this
  package.


pkgId: de980ea586cd17b6bafc1beec47b6573b055ee596d3a7753be3b802294966ff9
name: rust
arch: x86_64
version: 1.90.0
epoch: 0
release: 1
summary: The Rust Programming Language
url: https://www.rust-lang.org
rpm_license: Apache-2.0 or MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-1.90.0-1.src.rpm
location_href: x86_64/rust-1.90.0-1.x86_64.rpm
checksum_type: sha256
description:
  Rust is a systems programming language that runs blazingly fast, prevents
  segfaults, and guarantees thread safety.

  This package includes the Rust compiler and documentation generator.


pkgId: 6eac824db0e0f1af1c13c66a0159b2a79415156a4aecdff9acf0d463f3a5c69b
name: rust-cfg-if
arch: x86_64
version: 1.0.0
epoch: 0
release: 1
summary: Macro to ergonomically define an item depending on a large number of #[cfg] parameters
url: https://crates.io/crates/cfg-if
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-cfg-if-1.0.0-1.src.rpm
location_href: x86_64/rust-cfg-if-1.0.0-1.x86_64.rpm
checksum_type: sha256
description:
  Macro to ergonomically define an item depending on a large number of #[cfg]
  parameters. Structured like an if-else chain, the first matching branch is the
  item that gets emitted.


pkgId: 1e42c77a10695f6ab93faf4e7ae50b787785e8cc83b4e2762142c2baff7d0c54
name: rust-litrs
arch: x86_64
version: 0.4.0
epoch: 0
release: 1
summary: Parse and inspect Rust literals (i.e
url: https://crates.io/crates/litrs
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-litrs-0.4.0-1.src.rpm
location_href: x86_64/rust-litrs-0.4.0-1.x86_64.rpm
checksum_type: sha256
description:
  Parse and inspect Rust literals (i.e. tokens in the Rust programming language
  representing fixed values). Particularly useful for proc macros, but can also
  be used outside of a proc-macro context.


pkgId: 57572844761889b352775beecb98830406c85ce32236f9965ee6b8dbfec9f56a
name: rust-normalize-line-endings
arch: x86_64
version: 0.3.0
epoch: 0
release: 1
url: https://crates.io/crates/normalize-line-endings
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-normalize-line-endings-0.3.0-1.src.rpm
location_href: x86_64/rust-normalize-line-endings-0.3.0-1.x86_64.rpm
checksum_type: sha256
summary:
  Takes an iterator over chars and returns a new iterator with all line endings (\r, \n, or \r\n) as \n

description:
  Takes an iterator over chars and returns a new iterator with all line endings
  (\r, \n, or \r\n) as \n.


pkgId: c08da028986d9c1aa6a2d9db461edd3cf91a875ce64199056e3a79164cf16ba0
name: rust-proc-macro2
arch: x86_64
version: 1.0.51
epoch: 0
release: 1
url: https://crates.io/crates/proc-macro2
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-proc-macro2-1.0.51-1.src.rpm
location_href: x86_64/rust-proc-macro2-1.0.51-1.x86_64.rpm
checksum_type: sha256
summary:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-based libraries from the procedural macro use case

description:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-
  based libraries from the procedural macro use case.


pkgId: a9528aefb273f98909629ae6362770f2913e6ebde7d2c75d86b67f0fc7e3fc84
name: rust-regex
arch: x86_64
version: 1.7.1
epoch: 0
release: 1
summary: Implementation of regular expressions for Rust
url: https://crates.io/crates/regex
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-regex-1.7.1-1.src.rpm
location_href: x86_64/rust-regex-1.7.1-1.x86_64.rpm
checksum_type: sha256
description:
  Implementation of regular expressions for Rust. This implementation uses finite
  automata and guarantees linear time matching on all inputs.


pkgId: a76a76d408181f1b2e4fea8404dadd4b7ba647265d3ac8d82330367cb265cbfd
name: rust-scopeguard
arch: x86_64
version: 1.1.0
epoch: 0
release: 1
url: https://crates.io/crates/scopeguard
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-scopeguard-1.1.0-1.src.rpm
location_href: x86_64/rust-scopeguard-1.1.0-1.x86_64.rpm
checksum_type: sha256
summary:
  RAII scope guard that will run a given closure when it goes out of scope, even if the code between panics (assuming unwinding panic)

description:
  RAII scope guard that will run a given closure when it goes out of scope, even
  if the code between panics (assuming unwinding panic).
  Defines the macros `defer!`, `defer_on_unwind!`, `defer_on_success!` as
  shorthands for guards with one of the implemented strategies.


pkgId: 1a931a072261e1fc7e95bfd4cbd8e5211efea20c8b1dbcff56efe6de9bcbf110
name: rust-serde_spanned
arch: x86_64
version: 0.6.1
epoch: 0
release: 1
summary: Native Rust encoder and decoder of TOML-formatted files and streams
url: https://crates.io/crates/serde_spanned
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-serde_spanned-0.6.1-1.src.rpm
location_href: x86_64/rust-serde_spanned-0.6.1-1.x86_64.rpm
checksum_type: sha256
description:
  Native Rust encoder and decoder of TOML-formatted files and streams. Provides
  implementations of the standard Serialize/Deserialize traits for TOML data to
  facilitate deserializing and serializing Rust structures.


pkgId: bdfc42d549ebd36314e1137d93509aed4eff921954542eb7e8ba73a6c5a0243c
name: rust-stable_deref_trait
arch: x86_64
version: 1.2.0
epoch: 0
release: 1
url: https://crates.io/crates/stable_deref_trait
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-stable_deref_trait-1.2.0-1.src.rpm
location_href: x86_64/rust-stable_deref_trait-1.2.0-1.x86_64.rpm
checksum_type: sha256
summary:
  Unsafe marker trait for types like Box and Rc that dereference to a stable address even when moved, and hence can be used with libraries such as owning_ref and rental

description:
  Unsafe marker trait for types like Box and Rc that dereference to a stable
  address even when moved, and hence can be used with libraries such as
  owning_ref and rental.


pkgId: e3a45fe696a148ff20d70d3d2145a096a92ada2f7ab78a647d9036f5a5e7660a
name: rust-unicode-ident
arch: x86_64
version: 1.0.6
epoch: 0
release: 1
url: https://crates.io/crates/unicode-ident
rpm_license: (MIT OR Apache-2.0) AND Unicode-DFS-2016
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-unicode-ident-1.0.6-1.src.rpm
location_href: x86_64/rust-unicode-ident-1.0.6-1.x86_64.rpm
checksum_type: sha256
summary:
  Determine whether characters have the XID_Start or XID_Continue properties according to Unicode Standard Annex #31

description:
  Determine whether characters have the XID_Start or XID_Continue properties
  according to Unicode Standard Annex #31.


pkgId: 593f0ca9dbe278bce625eb82539bd8e5d7463ba7e3c29834f91e61c77211cd0b
name: rust-version-compare
arch: x86_64
version: 0.1.1
epoch: 0
release: 1
url: https://crates.io/crates/version-compare
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-version-compare-0.1.1-1.src.rpm
location_href: x86_64/rust-version-compare-0.1.1-1.x86_64.rpm
checksum_type: sha256
summary:
  Rust library to easily compare version numbers with no specific format, and test against various comparison operators

description:
  Rust library to easily compare version numbers with no specific format, and
  test against various comparison operators.


pkgId: eb378a3a34527c0a33d28b5e5ffb7a5f03e6cac5ca411ff648557de766b6d0de
name: scons
arch: x86_64
version: 4.4.0
epoch: 0
release: 0
summary: Replacement for Make
url: http://www.scons.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Tools/Building
rpm_sourcerpm: scons-4.4.0-0.src.rpm
location_href: x86_64/scons-4.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  SCons is a make replacement that provides a range of enhanced features,
  such as automated dependency generation and built-in compilation cache
  support. SCons rule sets are Python scripts, which means that SCons
  provides itself as well as the features. SCons allows you to use the
  full power of Python to control compilation.


pkgId: fb8f9cf7d87ec04e4c3a4acdf3e96838019fcf58eb3d7e7aa5b703bab49ab06f
name: sdbd-profile_tv
arch: x86_64
version: 3.0.50
epoch: 0
release: 0
summary: SDB daemon extension for TV
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sdbd-3.0.50-0.src.rpm
location_href: x86_64/sdbd-profile_tv-3.0.50-0.x86_64.rpm
checksum_type: sha256
description:
  SDB daemon extension for TV.
  This changes the service unit files of the default SDB daemon service files.


pkgId: ea9d6ca20c5e88401da26696410fd06694fc4d29103e165d19a535b7d195c455
name: security-privilege-manager
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.


pkgId: 0941e3194cb3492bde6d0900ef392dfc90045223de3934519eec036a6445d41b
name: security-privilege-manager-extension-iot
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen IoT profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-extension-iot-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen IoT profile,
  which requires security-profile-manger to be installed before this.


pkgId: 9e8cf516f133506926baeb8ca43eb74e62c110ba48cead07ec91b8eb12d74f76
name: security-privilege-manager-extension-mobile
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen Mobile profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-extension-mobile-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen Mobile profile,
  which requires security-profile-manger to be installed before this.


pkgId: 90425d27f36a6bd064abb7a7ab29ef365a0ff43fe4a8af34ed7d159002327464
name: security-privilege-manager-extension-tv
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen TV profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-extension-tv-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen TV profile,
  which requires security-profile-manger to be installed before this.


pkgId: 7de2beb62a035ca9438e26ed60d74e0ba2f1a931360cf83cf8afd162ff6ceb46
name: security-privilege-manager-extension-wearable
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen Wearable profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-extension-wearable-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen Wearable profile,
  which requires security-profile-manger to be installed before this.


pkgId: bfd836da40e66c50703e55283f91355861da2ebbc06b2f1264707462dc875e2f
name: sensord
arch: x86_64
version: 10.0.0
epoch: 0
release: 1
summary: Sensor daemon
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Sensor Framework
rpm_sourcerpm: sensord-10.0.0-1.src.rpm
location_href: x86_64/sensord-10.0.0-1.x86_64.rpm
checksum_type: sha256
description:
  This package provides the fully functional internal API library and the service daemon
  of the Sensor Framework. The library replaces the dummy library installed by sensord-dummy.


pkgId: c219c5de49cf1ec6546a2476fc8f422f872437c57641b309399a2d6a3883fdf4
name: sensord-dummy
arch: x86_64
version: 10.0.0
epoch: 0
release: 1
summary: Sensor Framework 'dummy' library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Sensor Framework
rpm_sourcerpm: sensord-10.0.0-1.src.rpm
location_href: x86_64/sensord-dummy-10.0.0-1.x86_64.rpm
checksum_type: sha256
description:
  This package provides the dummy library of the sensor internal API.
  Installing sensord replaces this dummy library with the actually functional library.


pkgId: a3d76ce46369eca0af60b7ab395f76e5f0a0ff072dcd9df5473d2fb86bf5eeeb
name: sgml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 0
summary: Common SGML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Applications/Text
rpm_sourcerpm: sgml-common-0.6.3-0.src.rpm
location_href: noarch/sgml-common-0.6.3-0.noarch.rpm
checksum_type: sha256
description:
  The sgml-common package contains a collection of entities and DTDs
  that are useful for processing SGML, but that don't need to be
  included in multiple packages.  Sgml-common also includes an
  up-to-date Open Catalog file.


pkgId: 21cc3e28062cc2f6dc214c7b0c4bf1f045e0f1d5df9c1a2b2b91d532790e7f27
name: shared-mime-info
arch: x86_64
version: 1.7
epoch: 0
release: 0
summary: Shared MIME Database
url: http://freedesktop.org/wiki/Software/shared-mime-info
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Base/Configuration
rpm_sourcerpm: shared-mime-info-1.7-0.src.rpm
location_href: x86_64/shared-mime-info-1.7-0.x86_64.rpm
checksum_type: sha256
description:
  This package contains:

  - The freedesktop.org shared MIME database spec.

  - The merged GNOME and KDE databases, in the new format.

  - The update-mime-database command, used to install new MIME data.


pkgId: 950a730f0bc018e151f8c399656ff3832424af10288586c1c24ad46e9846d704
name: snappy-devel
arch: x86_64
version: 1.1.7
epoch: 0
release: 0
summary: Development files for snappy
url: https://github.com/google/snappy/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: snappy-1.1.7-0.src.rpm
location_href: x86_64/snappy-devel-1.1.7-0.x86_64.rpm
checksum_type: sha256
description:
  Snappy is a compression/decompression library. It does not aim for maximum
  compression, or compatibility with any other compression library; instead, it
  aims for very high speeds and reasonable compression. For instance, compared to
  the fastest mode of zlib, Snappy is an order of magnitude faster for most
  inputs, but the resulting compressed files are anywhere from 20% to 100%
  bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy
  compresses at about 250 MB/sec or more and decompresses at about
  500 MB/sec or more.

  This package holds the development files for snappy.


pkgId: d079378b92be4057577468e85b6e4bc0642cc32b0fcffdf99eb7d5df788f4296
name: soundtouch
arch: x86_64
version: 2.1.0
epoch: 0
release: 0
summary: Audio processing library
url: https://gitlab.com
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Libraries
rpm_sourcerpm: soundtouch-2.1.0-0.src.rpm
location_href: x86_64/soundtouch-2.1.0-0.x86_64.rpm
checksum_type: sha256
description:
  Soundtouch is an audio processing library that allows changing
  the sound tempo, pitch and playback rate parameters independently from eash other.


pkgId: e9da04b7b589ecd74be106a2e95dc81829bb941d81705448b36881efbad21aa4
name: sqlcipher
arch: x86_64
version: 4.6.1
epoch: 0
release: 0
url: https://github.com/sqlcipher/sqlcipher
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Security/Crypto Libraries
rpm_sourcerpm: sqlcipher-4.6.1-0.src.rpm
location_href: x86_64/sqlcipher-4.6.1-0.x86_64.rpm
checksum_type: sha256
summary:
  SQLCipher is an open source extension to SQLite that provides transparent 256-bit AES encryption of database files

description:
  SQLCipher is an open source library that provides transparent, secure 256-bit
  AES encryption of SQLite database files. SQLCipher has been adopted as a secure
  database solution by many commercial and open source products, making it one of
  the most popular encrypted database platforms for Mobile, Embedded, and Desktop
  applications.


pkgId: 3638320756fcb7151ee49f2b17f688b74a75f2e9b33ff74721f839fa6b4feefd
name: ssat
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Shell Script Automated Tester
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: ssat-1.4.0-0.src.rpm
rpm_packager: MyungJoo Ham <myungjoo.ham@samsung.com>
location_href: x86_64/ssat-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  SSAT provides testing environment for shell scripts with Apache-2.0 license.
  This is created to avoid any complications related with GPL licenses.


pkgId: 807770476eeeda8250c2a06abdac5dc0ad4c1a7ab2100b1628c5c4f248e70de2
name: sshfs
arch: x86_64
version: 2.10
epoch: 0
release: 0
summary: A network filesystem client to connect to SSH servers
url: https://github.com/libfuse/sshfs
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Base/File Systems
rpm_sourcerpm: sshfs-2.10-0.src.rpm
location_href: x86_64/sshfs-2.10-0.x86_64.rpm
checksum_type: sha256
description:
  SSHFS (Secure SHell FileSystem) allows you to mount a remote filesystem
  using SFTP. Now that most SSH servers support and enable this SFTP access
  by default, the SSHFS is very simple to use. It means that there is nothing
  to do on the server-side. Note that SSHFS requires FUSE (Filesystem in
  USErspace) filesystem, that lets non-privileged users create own file systems
  without editing Linux kernel code.


pkgId: ef6db9d5546ca42857147817dc18b9070be0faefc864d6c1f72bbdf62e72c8f8
name: strace
arch: x86_64
version: 6.6
epoch: 0
release: 0
summary: A utility to trace the system calls of a program
url: http://sourceforge.net/projects/strace/
rpm_license: LGPL-2.1+ and GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: strace-6.6-0.src.rpm
location_href: x86_64/strace-6.6-0.x86_64.rpm
checksum_type: sha256
description:
  With strace, you can trace the activity of a program.  Information
  about any system calls the program makes and the signals it receives
  and processes can be seen.  Child processes can also be tracked.


pkgId: df7831f20667fa1541b52efeeb47be68d33067b63295bae7bd80ea658e9ee15c
name: sudo
arch: x86_64
version: 1.9.17p2
epoch: 0
release: 0
summary: Execute some commands as root
url: http://www.sudo.ws/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sudo-1.9.17p2-0.src.rpm
location_href: x86_64/sudo-1.9.17p2-0.x86_64.rpm
checksum_type: sha256
description:
  Sudo is a command that allows users to execute some commands as root.
  The /etc/sudoers file (edited with 'visudo') specifies which users have
  access to sudo and which commands they can run. Sudo logs all its
  activities to syslogd, so the system administrator can keep an eye on
  things. Sudo asks for the password for initializing a check period of a
  given time N (where N is defined at installation and is set to 5
  minutes by default).


pkgId: 3284e8b5e2530c672f39f77e1a9b70903d0d965dccca73b832309745b3d71bc8
name: sudo-rpm
arch: x86_64
version: 1.9.17p2
epoch: 0
release: 0
summary: Script making possible to run RPM as root from inside build
url: http://www.sudo.ws/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sudo-1.9.17p2-0.src.rpm
location_href: x86_64/sudo-rpm-1.9.17p2-0.x86_64.rpm
checksum_type: sha256
description:
  The package will add ALL ALL = (root) NOPASSWD: /usr/bin/rpm to sudoers and
  makes possible to install packages from inside build.


pkgId: c4f0d32ed0464fa443e7db32631306bfd096261ba246b3aae6f339f2bfe785f7
name: swig
arch: x86_64
version: 4.0.2
epoch: 0
release: 0
summary: Simplified Wrapper and Interface Generator
url: http://www.swig.org/
rpm_license: GPL-3.0+ and BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/C and C++
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: x86_64/swig-4.0.2-0.x86_64.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.


pkgId: afdeb99e65df2625b4f683fa9f2c51189587f2784feb230d1ca32b47ed36c1a2
name: swig-doc
arch: noarch
version: 4.0.2
epoch: 0
release: 0
summary: SWIG Manual
url: http://www.swig.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Documentation/Man
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: noarch/swig-doc-4.0.2-0.noarch.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.

  This package contains the SWIG manual.


pkgId: 7b977770ad41958a9ebbd5bda8f80512177224daa33e178425dc5116ad2bb067
name: swig-examples
arch: x86_64
version: 4.0.2
epoch: 0
release: 0
summary: SWIG example files
url: http://www.swig.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Documentation/Howto
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: x86_64/swig-examples-4.0.2-0.x86_64.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.

  This package contains SWIG examples, useful both for testing and
  understandig SWIG usage.


pkgId: 4caa40890024a66b8b3da37c292332240b4487222aaa458d7af9ceaf3d8fd692
name: sysprof-cli
arch: x86_64
version: 1.2.0
epoch: 0
release: 0
summary: Sampling CPU profiler (CLI)
url: http://sysprof.com/
rpm_license: GPL v2 or later
rpm_vendor: tizen
rpm_group: Development/Tools/Debuggers
rpm_sourcerpm: sysprof-1.2.0-0.src.rpm
location_href: x86_64/sysprof-cli-1.2.0-0.x86_64.rpm
checksum_type: sha256
description:
  Sysprof is a sampling CPU profiler for Linux.
  This package contains the command-line data-collection part only.


pkgId: 3309c3547aa4e152d726106bb415760151d20e38ace6baffd8167c7a8a1d929a
name: system-rw-update
arch: x86_64
version: 1.3.0
epoch: 0
release: 0
summary: System RW Update Manager
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: system-rw-update-1.3.0-0.src.rpm
location_href: x86_64/system-rw-update-1.3.0-0.x86_64.rpm
checksum_type: sha256
description:
  System RW update manager provides interface for running platform/application update scripts
  after software is updated to new version which is implemented by using systemd offline update.


pkgId: 01817b9f4b0c504fed55ab6ec6357cb549fa257b812617c225721d87dad63dd0
name: system-servant-profile_common
arch: x86_64
version: 0.2.2
epoch: 0
release: 1
summary: System-servant configured for common profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: system-servant-0.2.2-1.src.rpm
location_href: x86_64/system-servant-profile_common-0.2.2-1.x86_64.rpm
checksum_type: sha256
description:
  System-popup (system-servant) configured for common profile.
  The binary is shared between common/tv.


pkgId: e1318c746fbaa401e9d039b6e2810fc37ca71c4fd27524cce98c5d88805081db
name: systemd
arch: x86_64
version: 244
epoch: 0
release: 0
summary: A System and Service Manager
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+ and GPL-2.0+
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: x86_64/systemd-244-0.x86_64.rpm
checksum_type: sha256
description:
  systemd is a system and service manager for Linux, compatible with
  SysV and LSB init scripts. systemd provides aggressive parallelization
  capabilities, uses socket and D-Bus activation for starting services,
  offers on-demand starting of daemons, keeps track of processes using
  Linux cgroups, supports snapshotting and restoring of the system
  state, maintains mount and automount points and implements an
  elaborate transactional dependency-based service control logic. It can
  work as a drop-in replacement for sysvinit.


pkgId: 5810fcf2591113a94e91e074ca571ad95adea9b694954cf88d0b01e7f168b1ab
name: systemd-analyze
arch: x86_64
version: 244
epoch: 0
release: 0
summary: Tool for processing systemd profiling information
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: x86_64/systemd-analyze-244-0.x86_64.rpm
checksum_type: sha256
description:
  'systemd-analyze blame' lists which systemd unit needed how much time to finish
  initialization at boot.
  'systemd-analyze plot' renders an SVG visualizing the parallel start of units
  at boot.


pkgId: 0afe58aaf7bc30547e30c90321022154ea999c83e7649ba3ae82547f998e7c01
name: systemd-tests
arch: x86_64
version: 244
epoch: 0
release: 0
summary: Set of tests for sd-bus component
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+ and BSD-2-Clause
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: x86_64/systemd-tests-244-0.x86_64.rpm
checksum_type: sha256
description:
  This package is part of 'dbus-integratnion-tests' framework and contains set of tests
  for sd-bus component (DBUS API C library).


pkgId: 236e9b9b5412359b1d7be6f557c9d5622c1a4594161dbc9709c40f3a15f2496f
name: sz2-devel
arch: x86_64
version: 1.0.1
epoch: 0
release: 0
summary: Development files for libsz2
url: https://gitlab.dkrz.de/k202009/libaec
rpm_license: BSD-2-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: libaec-1.0.1-0.src.rpm
location_href: x86_64/sz2-devel-1.0.1-0.x86_64.rpm
checksum_type: sha256
description:
  Header files for libsz2, a drop-in replacement for the
  SZIP library (http://www.hdfgroup.org/doc_resource/SZIP).


pkgId: 35a150ba71528c8abbd65e1ec4a5992db8a9c3653e3ee4ddbce5d235e1c5e425
name: tayga
arch: x86_64
version: 0.9.2
epoch: 0
release: 1
summary: Simple, no-fuss NAT64 for Linux
url: http://www.litech.org/tayga/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Tools
rpm_sourcerpm: tayga-0.9.2-1.src.rpm
location_href: x86_64/tayga-0.9.2-1.x86_64.rpm
checksum_type: sha256
description:
  TAYGA is an out-of-kernel stateless NAT64 implementation for Linux that uses
  the TUN driver to exchange IPv4 and IPv6 packets with the kernel.
  It is intended to provide production-quality NAT64 service for networks
  where dedicated NAT64 hardware would be overkill.


pkgId: 7dbd622c9d0e4a55f622b245838a89013d47a68b9c71bee180403a2c75fc128a
name: tcpdump
arch: x86_64
version: 4.9.3
epoch: 0
release: 1
summary: A Packet Sniffer
url: http://www.tcpdump.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Productivity/Networking/Diagnostic
rpm_sourcerpm: tcpdump-4.9.3-1.src.rpm
location_href: x86_64/tcpdump-4.9.3-1.x86_64.rpm
checksum_type: sha256
description:
  This program can "read" all or only certain packets going over the
  ethernet. It can be used to debug specific network problems.


pkgId: d81d8f45dfa43e5cbfca0498ab1a260cd6b2197b89b6321946e7aac0894d42d1
name: tidl-action-toolchain
arch: x86_64
version: 2.7.1
epoch: 0
release: 1
summary: Tizen Action toolchain for TIDL
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Building
rpm_sourcerpm: tidl-2.7.1-1.src.rpm
location_href: x86_64/tidl-action-toolchain-2.7.1-1.x86_64.rpm
checksum_type: sha256
description:
  Tizen Action toolchain utilities for converting .action and .entity schemas
  to TIDL and generating service stubs through tidlc.


pkgId: e26b9b077c6f719167f9938d825b6a3480dde118b551cf3d274719457d1769ae
name: tizen-debug
arch: x86_64
version: 2.40
epoch: 0
release: 1
summary: libc debug information with .debug_frame section only and ld debug information
rpm_license: LGPL-2.1+ and LGPL-2.1+-with-GCC-exception and GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: tizen-debug-2.40-1.src.rpm
location_href: x86_64/tizen-debug-2.40-1.x86_64.rpm
checksum_type: sha256
description:
  The package contains the libc.so debug library with .debug_frame section only
  which can be helpful during signal frame backtrace.
  Also, the ld.so debug information is included for the debugging convenience.


pkgId: 4eec90aa35610a2844c580fb97766edb203484b38367f8fe3b4e89069395fd2d
name: tlm
arch: x86_64
version: 1.0.3
epoch: 0
release: 1
summary: Login manager for Tizen
url: https://github.com/01org/tlm
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: System/Service
rpm_sourcerpm: tlm-1.0.3-1.src.rpm
location_href: x86_64/tlm-1.0.3-1.x86_64.rpm
checksum_type: sha256
description:
  TLM is a daemon that handles user logins in a multi-user, multi-seat system by
  authenticating the users through PAM, and setting up, launching, and tracking
  user sessions.


pkgId: 0cfb0047c194b5fe09c65a0c5f97b40c7d3a9b54a78e01c892d535dd1e0431d2
name: tolua++
arch: x86_64
version: 1.0.93
epoch: 0
release: 0
summary: C/C++ with Lua Integration Tool
url: http://www.codenix.com/~tolua/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: tolua++-1.0.93-0.src.rpm
location_href: x86_64/tolua++-1.0.93-0.x86_64.rpm
checksum_type: sha256
description:
  tolua++ is an extended version of tolua, a tool to integrate C/C++ code with
  Lua. tolua++ includes new features oriented to c++ such as:
  * support for std::string as a basic type (this can be turned off by a command
    line option)
  * support for class templates
  as well as other features and bugfixes.


pkgId: af90596fc621ece0973fe80b713c523c2e00eb670b47e4002cc103a470f37b1a
name: toybox
arch: x86_64
version: 0.6.0
epoch: 0
release: 1
summary: Single binary providing simplified versions of system commands
url: http://www.landley.net/toybox/
rpm_license: BSD-2.0
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: toybox-0.6.0-1.src.rpm
location_href: x86_64/toybox-0.6.0-1.x86_64.rpm
checksum_type: sha256
description:
  Toybox is a single binary which includes versions of a large number
  of system commands, including a shell.  This package can be very
  useful for recovering from certain types of system failures,
  particularly those involving broken shared libraries.


pkgId: 2fda6dffa42f5465921d1df9f997c9692efdcc7b57fdae673475335e478dac2e
name: trust-anchor
arch: x86_64
version: 2.1.2
epoch: 0
release: 0
summary: Trust Anchor API
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Security/Certificate Management
rpm_sourcerpm: trust-anchor-2.1.2-0.src.rpm
location_href: x86_64/trust-anchor-2.1.2-0.x86_64.rpm
checksum_type: sha256
description:
  The package provides trust-anchor which the application can assign
  SSL root certificates for its HTTPS communication.


pkgId: 6e0070c1bf843e59bc76929e30d08b93835cd021e3ff18049e52002a9a2f3671
name: tvm-runtime
arch: x86_64
version: 0.7.0
epoch: 0
release: 0
summary: TVM Runtime Library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: tvm-runtime-0.7.0-0.src.rpm
location_href: x86_64/tvm-runtime-0.7.0-0.x86_64.rpm
checksum_type: sha256
description:
  Apache TVM is a compiler stack for deep learning systems. It is designed to close the gap between the productivity-focused deep learning frameworks, and the performance- and efficiency-focused hardware backends. TVM works with deep learning frameworks to provide end to end compilation to different backends.


pkgId: b83d6cca8ebe4967ac31b5e44d3c573fa966da98c2a3ab6a34460802f9733e79
name: typelib-1_0-Atspi-2_0
arch: x86_64
version: 2.44.1
epoch: 0
release: 1
summary: An Accessibility ToolKit -- Introspection bindings
url: http://www.gnome.org/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: at-spi2-core-2.44.1-1.src.rpm
location_href: x86_64/typelib-1_0-Atspi-2_0-2.44.1-1.x86_64.rpm
checksum_type: sha256
description:
  AT-SPI is a general interface for applications to make use of the
  accessibility toolkit. This version is based on dbus.

  This package provides the GObject Introspection bindings for the
  libatspi library.


pkgId: d5bfbdd00b443edb6572c05722d3cf96fa929116ccc4c8b16622808cfd515817
name: typelib-Json
arch: x86_64
version: 1.8.0
epoch: 0
release: 0
summary: Introspection bindings for libjson-glib
url: https://wiki.gnome.org/Projects/JsonGlib
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: json-glib-1.8.0-0.src.rpm
location_href: x86_64/typelib-Json-1.8.0-0.x86_64.rpm
checksum_type: sha256
description:
  JSON-GLib provides a parser and a generator GObject classes and various
  wrappers for the complex data types employed by JSON, such as arrays
  and objects.

  This package provides the GObject Introspection bindings for JSON-GLib.


pkgId: 45ae931eadb3fab95b7e67c0a4ab2970f17beb2c6e23bb5a6724c9d87ccc10b7
name: typelib-Soup
arch: x86_64
version: 2.72.0
epoch: 0
release: 1
summary: HTTP client/server library for GNOME -- Introspection bindings
url: http://www.gnome.org
rpm_license: LGPL-2.0+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: libsoup-2.72.0-1.src.rpm
location_href: x86_64/typelib-Soup-2.72.0-1.x86_64.rpm
checksum_type: sha256
description:
  Libsoup is an HTTP client/server library for GNOME. It uses GObjects
  and the glib main loop, to integrate well with GNOME applications.

  This package provides the GObject Introspection bindings for libsoup.


pkgId: bcf13352916118ec212a717c94bf79ae9749c06385d007da468033b5c6370f97
name: united-service
arch: x86_64
version: 1.3.1
epoch: 0
release: 0
summary: United Service
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: App Framework/Application Core
rpm_sourcerpm: united-service-1.3.1-0.src.rpm
location_href: x86_64/united-service-1.3.1-0.x86_64.rpm
checksum_type: sha256
description:
  United service is to integrate multiple currently independent daemons into one process
  to improve management efficiency, optimize resource usage, and ensure consistency between services.


pkgId: 7e35bd978aa5dad3e2612f23d69dea3957667f01fcb3996ec9103fe5fc1b4428
name: update-desktop-files
arch: noarch
version: 12.1
epoch: 0
release: 0
summary: A Build Tool to Update Desktop Files
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: update-desktop-files-12.1-0.src.rpm
location_href: noarch/update-desktop-files-12.1-0.noarch.rpm
checksum_type: sha256
description:
  This package provides further translations and a shell script to update
  desktop files. It is used by the %tizen_update_desktop_file rpm macro.


pkgId: 8c31fe0b2bf11fbfbaa9a341fd2617ed3c8b7d765898eba16aa9e91083b2bd2d
name: upgrade-parse-dynparts
arch: x86_64
version: 10.0.0
epoch: 0
release: 0
summary: Utility needed to parse dynamic partition on-disk format
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: x86_64/upgrade-parse-dynparts-10.0.0-0.x86_64.rpm
checksum_type: sha256
description:
  This package provides utility needed to parse "super" on-disk format, and print
  out necessary device mapper maps, needed to later mount filesystems contained in
  dynamic partition area.


pkgId: 574136fdcfd3de221d96c447caaf07e91d3d9c062b148c8a4149e3038d5d020b
name: upgrade-resize-dynparts
arch: x86_64
version: 10.0.0
epoch: 0
release: 0
summary: Utility for modification of dynamic partitions size in super metadata
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: x86_64/upgrade-resize-dynparts-10.0.0-0.x86_64.rpm
checksum_type: sha256
description:
  This package provides utility needed to modify metadata of a super partition by
  changing size of dynamic partitions.


pkgId: d60298ad1e9c433c24f220725a52e9c4e4dad1a1a5e9fc93484a9e6850b58ebf
name: upgrade-ro
arch: x86_64
version: 10.0.0
epoch: 0
release: 0
summary: Contains all necessary tools to perform RO Upgrade
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: x86_64/upgrade-ro-10.0.0-0.x86_64.rpm
checksum_type: sha256
description:
  Update engine adding all necessary tools, scripts and configuration
  for updating Tizen platform images using delta files as generated by
  upgrade-tools.


pkgId: 79b959505e020327aa429ca5c6febf394f01a8c9c71e10cf25483b6f2cdc5096
name: valgrind
arch: x86_64
version: 3.25.0
epoch: 0
release: 0
summary: Memory Management Debugger
url: http://valgrind.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools/Debuggers
rpm_sourcerpm: valgrind-3.25.0-0.src.rpm
location_href: x86_64/valgrind-3.25.0-0.x86_64.rpm
checksum_type: sha256
description:
  Valgrind checks all memory operations in an application, like read,
  write, malloc, new, free, and delete. Valgrind can find uses of
  uninitialized memory, access to already freed memory, overflows,
  illegal stack operations, memory leaks, and any illegal
  new/malloc/free/delete commands. Another program in the package is
  "cachegrind," a profiler based on the valgrind engine.

  To use valgrind you should compile your application with "-g -O0"
  compiler options. Afterwards you can use it with:

  valgrind --tool=memcheck --sloppy-malloc=yes --leak-check=yes
  --db-attach=yes my_application, for example.

  More valgrind options can be listed via "valgrind --help". A
  debugged application runs slower and needs much more memory, but
  is usually still usable. Valgrind is still in development, but it
  has been successfully used to optimize several KDE applications.


pkgId: 155608a179d514a08198a0b2d500fdd28e166fb2fbbb3a1b9186173eea4121a3
name: vconf-internal-keys-config-profile_common
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for common
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_common-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for common
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 6b5917b5e2e6539bc7096ccc4bf1500cef15be2cc896531fdb09a960d1d4d84e
name: vconf-internal-keys-config-profile_ivi
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for ivi
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_ivi-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for ivi
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 3e966ead709f0c44c82969a36ba8e982a4ead134d9608e8a83c1e16ddadcca3b
name: vconf-internal-keys-config-profile_mobile
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for mobile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_mobile-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for mobile.
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 45ef1b0616e27a0b01d5e64debe0fc6a77027d0f5b0e2f1f5be1d28bc5e90502
name: vconf-internal-keys-config-profile_tv
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for tv
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_tv-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for tv
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 4c9e8ff47e52243006e23b70bcf696eea4b346b780434558159485849bd9d9d4
name: vconf-internal-keys-config-profile_wearable
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for wearable
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_wearable-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for wearable
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: a1ac1bf30917917bfabf94aa3d74ce49266feaf6995562650088587ca41bc8c6
name: verity-tools
arch: x86_64
version: 2.2
epoch: 0
release: 1
summary: A tool for dm-verity
rpm_license: MIT
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: initrd-2.2-1.src.rpm
location_href: x86_64/verity-tools-2.2-1.x86_64.rpm
checksum_type: sha256
description:
  verityctl tool for dm-verity. Similar with veritysetup of cryptsetup
  but it can handle with verity meta data block.


pkgId: 872277adac18fffe695988fc535f77595850c5e7aad038ca97b03f780f57c549
name: vi
arch: x86_64
version: 050325
epoch: 0
release: 1
summary: The Traditional Vi
url: http://ex-vi.sourceforge.net/
rpm_license: BSD-4-Clause-UC and BSD-4-Clause-Caldera
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: vi-050325-1.src.rpm
location_href: x86_64/vi-050325-1.x86_64.rpm
checksum_type: sha256
description:
  Compared to most of its many clones, the traditional vi is a rather small
  program just with its extremely powerful editing interface, but lacking fancy
  features like multiple undo, multiple screens, or syntax highlighting.
  This port of vi has generally preserved the original style, terminal control,
  and feature set. It adds support for international character sets, including
  multibyte encodings such as UTF-8, and some minor enhancements that were not
  present in BSD vi 3.7, but had been included in later vi versions for System V
  or in POSIX.2.


pkgId: bf67fb560d0c431b3429af534692fca1d0b9fe558509d78c68bf29a2f69d80fe
name: vpx-tools
arch: x86_64
version: 1.12.0
epoch: 0
release: 2
summary: VP8 codec library - Utilities
url: http://www.webmproject.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Multimedia/Libraries
rpm_sourcerpm: libvpx-1.12.0-2.src.rpm
location_href: x86_64/vpx-tools-1.12.0-2.x86_64.rpm
checksum_type: sha256
description:
  This package contains utilities around the vp8 codec sdk.

  WebM is an open, royalty-free, media file format designed for the web.

  WebM defines the file container structure, video and audio formats.
  WebM files consist of video streams compressed with the VP8 video codec
  and audio streams compressed with the Vorbis audio codec.
  The WebM file structure is based on the Matroska container.


pkgId: e89799cc4f8c0b4f0b5a99e291ef938fe5fc698fdc5e3fdbc534191f074e08a1
name: vulkan-loader-devel
arch: x86_64
version: 1.3.296
epoch: 0
release: 0
summary: Development files for vulkan-loader
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-loader-1.3.296-0.src.rpm
location_href: x86_64/vulkan-loader-devel-1.3.296-0.x86_64.rpm
checksum_type: sha256
description:
  The vulkan-loader-devel package contains libraries and header files for
  developing applications that use vulkan-loader.


pkgId: aca4ac66bafaf0fecf7e9db13f5d8e1d8b2c9be21afaf877fa5a9b617d0bc6e9
name: vulkan-utility-libraries
arch: x86_64
version: 1.3.296
epoch: 0
release: 0
summary: Vulkan utility libraries
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-utility-libraries-1.3.296-0.src.rpm
location_href: x86_64/vulkan-utility-libraries-1.3.296-0.x86_64.rpm
checksum_type: sha256
description:
  This repo was created to share code across various Vulkan repositories,
  solving long standing issues for Vulkan SDK developers and users.


pkgId: 99503c6af9778b131e4e3571a3e949c4753e7c0e65cb4b870d1c3f47acf288e6
name: vulkan-validation-layers-devel
arch: x86_64
version: 1.3.296
epoch: 0
release: 0
summary: Development files for vulkan-validation-layers
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-validation-layers-1.3.296-0.src.rpm
location_href: x86_64/vulkan-validation-layers-devel-1.3.296-0.x86_64.rpm
checksum_type: sha256
description:
  The vulkan-validation-layers-devel package contains libraries and header files for
  developing applications that use vulkan-validation-layers.


pkgId: a6ffccf9a024ba8f8e372a61e67f1529096b3602d9649d05e4a33099ef0cadaa
name: wayland-devel
arch: x86_64
version: 1.23.1
epoch: 0
release: 0
summary: Development files for the Wayland Compositor Infrastructure
url: http://wayland.freedesktop.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-1.23.1-0.src.rpm
location_href: x86_64/wayland-devel-1.23.1-0.x86_64.rpm
checksum_type: sha256
description:
  Wayland is a protocol for a compositor to talk to its clients as well
  as a C library implementation of that protocol. The compositor can be
  a standalone display server running on Linux kernel modesetting and
  evdev input devices, an X application, or a wayland client itself.
  The clients can be traditional applications, X servers (rootless or
  fullscreen) or other display servers.

  This package contains all necessary include files and libraries needed
  to develop applications that require these.


pkgId: 2b71eaa69dc691cb224a75b31f5b626e0574ed59b35b65a2bfdfd9306fa2da6d
name: wayland-extension-client-devel
arch: x86_64
version: 1.3.82
epoch: 0
release: 0
summary: Client development files for the Wayland Extension Protocol
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.82-0.src.rpm
location_href: x86_64/wayland-extension-client-devel-1.3.82-0.x86_64.rpm
checksum_type: sha256
description:
  wayland-extension is a protocol for tizen window system.

  This package contains all necessary include files and libraries needed
  to develop applications that require these.


pkgId: dde4543e56d50e79203da5f9502989946e17543de33f2422fa056ee19a825a9f
name: wayland-extension-server-devel
arch: x86_64
version: 1.3.82
epoch: 0
release: 0
summary: Server development files for the Wayland Extension Protocol
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.82-0.src.rpm
location_href: x86_64/wayland-extension-server-devel-1.3.82-0.x86_64.rpm
checksum_type: sha256
description:
  wayland-extension is a protocol for tizen window system.

  This package contains all necessary include files and libraries needed
  to develop a compositor that require these.


pkgId: b66bd8ba70b9b49c620f61f8b603c25c6cd603a237cadf5c0c7b96f9ce7856c0
name: wayland-protocols
arch: x86_64
version: 1.3.82
epoch: 0
release: 0
summary: Wayland upstream protocols
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.82-0.src.rpm
location_href: x86_64/wayland-protocols-1.3.82-0.x86_64.rpm
checksum_type: sha256
description:
  wayland-protocols contains Wayland upstream protocols that add functionality not available in the Wayland core protocol


pkgId: 4fdbf2402b05a9f4e4aca3ad2996f0e5c63e03cb63875f9d631b50d0f87749dd
name: wdiff
arch: x86_64
version: 1.2.2
epoch: 0
release: 1
summary: Display Word Differences Between Text Files
url: https://ftp.gnu.org/gnu/wdiff/
rpm_license: GPL-3.0+
rpm_vendor: tizen
rpm_group: Productivity/Text/Utilities
rpm_sourcerpm: wdiff-1.2.2-1.src.rpm
location_href: x86_64/wdiff-1.2.2-1.x86_64.rpm
checksum_type: sha256
description:
  wdiff compares two files and finds which words have been deleted or
  added to old_file to get new_file. A word is considered to be anything
  between whitespace.

  Xwdiff is a handy X Window System front-end, based on Tcl/Tk.


pkgId: 90d8f10dd750f93dafe61ac1a04c73e2f4b5e0ac9a59bc4308b37b0c2f33bc0f
name: webauthn-ble-manual-tests
arch: x86_64
version: 1.0.8
epoch: 0
release: 1
summary: Adaptation Layer of Web Authentication Service for BLE Authenticator (manual test)
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Security/Development
rpm_sourcerpm: webauthn-ble-1.0.8-1.src.rpm
location_href: x86_64/webauthn-ble-manual-tests-1.0.8-1.x86_64.rpm
checksum_type: sha256
description:
  Adaptation Layer of Web Authentication Service for BLE Authenticator (manual test)
  The webauthn-manual-tests required to use webauthn-image-viewer


pkgId: a5552de8cb23c514553c80978a52c5581c6d23aa8eed07ca6e00b174974d4669
name: webrtc-audio-processing
arch: x86_64
version: 0.3.1
epoch: 0
release: 2
summary: Library for echo cancellation
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: webrtc-audio-processing-0.3.1-2.src.rpm
location_href: x86_64/webrtc-audio-processing-0.3.1-2.x86_64.rpm
checksum_type: sha256
description:
  webrtc-audio-processing is a library derived from Google WebRTC project that
  provides echo cancellation functionality. This library is used by for example
  PulseAudio to provide echo cancellation.


pkgId: 8dc0e134a2a68f5e5be34382f66f411e38c45dd0cde11f86fc7f4bbba1526f95
name: webrtc-audio-processing-devel
arch: x86_64
version: 0.3.1
epoch: 0
release: 2
summary: Development files for webrtc-audio-processing
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: webrtc-audio-processing-0.3.1-2.src.rpm
location_href: x86_64/webrtc-audio-processing-devel-0.3.1-2.x86_64.rpm
checksum_type: sha256
description:
  The webrtc-audio-processing-devel package contains libraries and header
  files for developing applications that use webrtc-audio-processing.


pkgId: f5dc095c13081587d058fb407e022c1d2b9090a9a44daede91f5e7e46c66aca4
name: wireless-regdb
arch: x86_64
version: 2013.01.11
epoch: 0
release: 0
summary: Linux wireless regulatory database
url: http://wireless.kernel.org/en/developers/Regulatory/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: wireless-regdb-2013.01.11-0.src.rpm
location_href: x86_64/wireless-regdb-2013.01.11-0.x86_64.rpm
checksum_type: sha256
description:
  This package contains the wireless regulatory database used by all
  cfg80211 based Linux wireless drivers. The wireless database being
  used is maintained by John Linville, the Linux wireless kernel maintainer
  http://wireless.kernel.org/en/developers/Regulatory/


pkgId: dd91b3b85d46f3ff5543ae1c8612cd4eb94ae1dfeca42075e5ec4b3f4aecda5e
name: wpa_supplicant
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: WPA supplicant implementation
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  wpa_supplicant is an implementation of the WPA Supplicant component,
  i.e., the part that runs in the client stations. It implements key
  negotiation with a WPA Authenticator and it controls the roaming and
  IEEE 802.11 authentication/association of the wlan driver.


pkgId: d094540032a759589789d2b8fef7ecb16ca9254d6a3232af1150f2976a1f2fff
name: wpa_supplicant-client_tool
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: Text-based client tool for wpa_supplicant and hostapd
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-client_tool-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  Text-based frontend programs for interacting with wpa_supplicant and hostapd.
  It is used to query current status, change configuration,
  trigger events, and request interactive user input.


pkgId: c70482cc1fc7e171560cc6abf61e29d11b7738ba3180c3ebb19bfd25c86855af
name: wpa_supplicant-extension-TM1
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: Extension for mobile TM1
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-extension-TM1-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  Customized wpa_supplicant supporting SPRD-based boards including TM1.
  Having such ifdefs in public Tizen is really ugly, but for the sake
  of backward-compatibility, we have this subpackage. Please remove
  such variations later.


pkgId: cf8a50ce358ab5e8feaec0daed8256d4436dd26f8e95ca09e574f347f7d77c0d
name: wpa_supplicant-extension-TM2
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: Extension for mobile TM2
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-extension-TM2-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  Customized wpa_supplicant supporting BROADCOM-based boards including TM1.
  Having such ifdefs in public Tizen is really ugly, but for the sake
  of backward-compatibility, we have this subpackage. Please remove
  such variations later.


pkgId: 0c63f9fe6e0d06fa94da54df2a2b3ebd0a90d43657c69f34bb251b82523e99a9
name: wpa_supplicant-profile_tv
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: Patched wpa_supplicant for TV
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-profile_tv-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  TV-profile somehow wants to disable WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE
  unconditionally at wpa_supplicant/wpa_supplicant.c. It should later be
  determined at runtime/boottime, not at buildtime.


pkgId: 755405b8f217c5aad18633c29603ff544dee703a3f68c811fbfb793a44ec7ba9
name: xdelta3
arch: x86_64
version: 3.0.11
epoch: 0
release: 1
summary: The xdelta3
url: http://xdelta.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: xdelta3-3.0.11-1.src.rpm
location_href: x86_64/xdelta3-3.0.11-1.x86_64.rpm
checksum_type: sha256
description:
  Xdelta3 is a set of tools designed to compute changes between
  binary files.  These changes (delta files) are similar to the output of the
  "diff" program, in that they may be used to store and transmit only the
  changes between files.  The "delta files" that Xdelta3 manages are
  stored in RFC3284 (VCDIFF) format.


pkgId: 9b11147809e0eeda5e03abc349ca8251a6e5134d98a8e269132925112fdf3af1
name: xkeyboard-config
arch: x86_64
version: 2.13
epoch: 0
release: 0
summary: The X Keyboard Extension
url: http://www.freedesktop.org/Software/XKeyboardConfig
rpm_license: MIT
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: xkeyboard-config-2.13-0.src.rpm
location_href: x86_64/xkeyboard-config-2.13-0.x86_64.rpm
checksum_type: sha256
description:
  The X Keyboard Extension essentially replaces the core protocol
  definition of keyboard. The extension makes possible to clearly and
  explicitly specify most aspects of keyboard behaviour on per-key basis
  and to more closely track the logical and physical state of the
  keyboard. It also includes a number of keyboard controls designed to
  make keyboards more accessible to people with physical impairments.


pkgId: 08df8aa80b5cbe232442baa57c6ca7ff90d7539dfd6f6f922ed9cd9f11b301bd
name: xml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 0
summary: Common XML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Applications/Text
rpm_sourcerpm: sgml-common-0.6.3-0.src.rpm
location_href: noarch/xml-common-0.6.3-0.noarch.rpm
checksum_type: sha256
description:
  The xml-common is a subpackage of sgml-common which contains
  a collection XML catalogs that are useful for processing XML,
  but that don't need to be included in main package.


pkgId: 54234bdddf77ddf63d58fe078df1526ba27785af9e02e30f69a32d4cdf74f569
name: xmlto
arch: x86_64
version: 0.0.28
epoch: 0
release: 0
summary: Tool for Converting XML Files to Various Formats
url: https://fedorahosted.org/xmlto/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Productivity/Publishing/XML
rpm_sourcerpm: xmlto-0.0.28-0.src.rpm
location_href: x86_64/xmlto-0.0.28-0.x86_64.rpm
checksum_type: sha256
description:
  This is a package for converting XML files to various formats using XSL
  stylesheets.  As a processor it depends on xsltproc and as a formatter
  for print output it makes use of passivetex.


pkgId: 04a7135bc4617c324ba66332b767ce9a43ae7f00835abc6f091ebbca08304659
name: yum
arch: noarch
version: 3.4.3
epoch: 0
release: 0
summary: RPM package installer/updater/manager
url: http://yum.baseurl.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: yum-3.4.3-0.src.rpm
location_href: noarch/yum-3.4.3-0.noarch.rpm
checksum_type: sha256
description:
  Yum is a utility that can check for and automatically download and
  install updated RPM packages. Dependencies are obtained and downloaded
  automatically, prompting the user for permission as necessary.


pkgId: f08aa27ea0c14d96034c218533ad424d3d8b72d634a7cb2eae7f9df07cb97cad
name: zbar
arch: x86_64
version: 0.10
epoch: 0
release: 23
summary: Bar code reader
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zbar-0.10-23.src.rpm
location_href: x86_64/zbar-0.10-23.x86_64.rpm
checksum_type: sha256
description:
  A layered barcode scanning and decoding library. Supports EAN, UPC, Code 128,
  Code 39 and Interleaved 2 of 5.
  Includes applications for decoding captured barcode images and using a video
  device (eg, webcam) as a barcode scanner.


pkgId: 405f3d156aec2caf3a4a336efbdb392a10ee18e4af1f066dd314f71b26d0bfa1
name: zbar-devel
arch: x86_64
version: 0.10
epoch: 0
release: 23
summary: Bar code library extra development files
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zbar-0.10-23.src.rpm
location_href: x86_64/zbar-devel-0.10-23.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files and additional libraries used for
  developing applications that read bar codes with this library.


pkgId: 2af2ac32edc2e82e62d816707dcc57f5fb230006dab00164961bb0158190defb
name: zint
arch: x86_64
version: 2.6.7
epoch: 0
release: 2
summary: Barcode generator library
url: http://www.zint.org.uk
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zint-2.6.7-2.src.rpm
location_href: x86_64/zint-2.6.7-2.x86_64.rpm
checksum_type: sha256
description:
  Zint is a C library for encoding data in several barcode variants. The
  bundled command-line utility provides a simple interface to the library.
  Features of the library:
  - Over 50 symbologies including all ISO/IEC standards, like QR codes.
  - Unicode translation for symbologies which support Latin-1 and
    Kanji character sets.
  - Full GS1 support including data verification and automated insertion of
    FNC1 characters.
  - Support for encoding binary data including NULL (ASCII 0) characters.
  - Health Industry Barcode (HIBC) encoding capabilities.
  - Output in the following file formats: PNG, GIF, EPS, WMF, BMP, TIF, SVG.
  - Verification stage for SBN, ISBN and ISBN-13 data.


pkgId: 073d495dd40de5c89f357d6a95f8f0bf30943e6485883c2eaf4016e162bcd5c4
name: zint-devel
arch: x86_64
version: 2.6.7
epoch: 0
release: 2
summary: Library and header files for zint
url: http://www.zint.org.uk
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zint-2.6.7-2.src.rpm
location_href: x86_64/zint-devel-2.6.7-2.x86_64.rpm
checksum_type: sha256
description:
  C library and header files needed to develop applications that use
  the Zint library. The API documentation can be found on the project website:
  http://www.zint.org.uk/zintSite/Manual.aspx


pkgId: 011d4551ad731537b7b1ffed8654d468c97b65cf2ffc6e66529ac9dee5965a68
name: zypper
arch: x86_64
version: 1.14.38
epoch: 0
release: 0
summary: Command line software manager using libzypp
url: http://en.opensuse.org/Zypper
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Package Management
rpm_sourcerpm: zypper-1.14.38-0.src.rpm
location_href: x86_64/zypper-1.14.38-0.x86_64.rpm
checksum_type: sha256
description:
  Zypper is a command line tool for managing software. It can be used to add
  package repositories, search for packages, install, remove, or update packages,
  install patches, hardware drivers, verify dependencies, and more.

  Zypper can be used interactively or non-interactively by user, from scripts,
  or front-ends.

  Authors:
  --------
      Jan Kupec <jkupec@suse.cz>
      Duncan Mac-Vicar <dmacvicar@suse.de>
      Martin Vidner <mvidner@suse.cz>
      Josef Reidinger <jreidinger@suse.cz>


pkgId: 9a307775fabaf9338568a7b1f8d8a0144b6c47bcdd63924c7f73ecaeac5995fe
name: zypper-tizen-config
arch: noarch
version: 1.14.38
epoch: 0
release: 0
summary: zypper repo configuration for Tizen:Unified developers
url: http://en.opensuse.org/Zypper
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Packages
rpm_sourcerpm: zypper-1.14.38-0.src.rpm
location_href: noarch/zypper-tizen-config-1.14.38-0.noarch.rpm
checksum_type: sha256
description:
  Zypper repo configuration for Tizen:Unified developers.
  This is for Tizen device and platform development.


# files

type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/compaction-times-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/compaction-times-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/event_analyzing_sample-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/event_analyzing_sample-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/export-to-postgresql-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/export-to-postgresql-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/export-to-sqlite-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/export-to-sqlite-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/futex-contention-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/futex-contention-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/intel-pt-events-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/intel-pt-events-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/net_dropmonitor-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/net_dropmonitor-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/sched-migration-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/sched-migration-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/syscall-counts-by-pid-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/syscall-counts-by-pid-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/config2csv.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/config_override.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/configcheck.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/configinit.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/console-badness.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/jitterstart.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/jitterstop.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kcsan-collapse.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-assign-cpus.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-check-branches.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-get-cpus-script.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale-ftrace.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-refscale.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-scf.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-remote-noreap.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-remote.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-transform.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/parse-build.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/parse-console.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/srcu_lockdep.sh


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/coco_labels_list.txt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.2.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.2.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.3.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.3.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_result_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_result_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov10_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov10_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_track_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_obb_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_obb_decoder_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_custom/unittest_filter_custom.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_python3/unittest_filter_python3.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_reload/tensor_filter_reload_test.c


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.2


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/unittest_filter_tensorflow2_lite.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_repo_dynamicity/tensor_repo_dynamic_test.c


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/labels/google_lenet_ncsdk_caffe_1.labels


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/google_lenet_ncsdk_caffe_1.graph


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/invalid_class_custom_converter.py


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v1_1.0_224_quant.invalid


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v1_1.0_224_quant.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v2_1.0_224_quant.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/multi_person_mobilenet_v1_075_float.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/ncnn_models/squeezenet_v1.1.bin


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/ncnn_models/squeezenet_v1.1.param


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/openvino_mobilenetv2-int8-tf-0001.bin


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/openvino_mobilenetv2-int8-tf-0001.xml


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_3x4_two_input_two_output.pt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_3x4_two_input_two_output.pte


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.pt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.pte


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.tflite


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/attention_batched_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_batched.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_batched_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/bn_channels_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/bn_channels_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/bn_width_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/bn_width_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_minimum_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_minimum_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_minimum_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_minimum_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/dropout_0_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/dropout_100_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/dropout_20_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/dropout_20_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/embedding_mixed_double_batch.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/embedding_mixed_single_batch.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/embedding_w32a32_single_batch.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_act.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_seq.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_reset_after_single_step.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_reset_after_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_act.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_act.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstmcell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_output_shape.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_output_shape_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_return_attention_scores.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_return_attention_scores_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_single_batch.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_single_batch_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_value_dim.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_value_dim_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_partial.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_partial_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/rnncell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/upsample2d_2x2_bilinear.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/upsample2d_3x3_bilinear.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/upsample2d_big_bilinear.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/bidirectional_lstm_single.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/bidirectional_lstm_stacked.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/fc_unroll_stacked_clipped.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/gru_reset_after_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/gru_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/lstm_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_gru_reset_after_return_sequence.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_gru_reset_after_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_gru_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_gru_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_disable_need_weights.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_kdim_vdim.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_self_attention.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_lstm_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_lstm_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_rnn_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_rnn_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/pooling_avg_same_padding_multi_stride.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/pooling_max_same_padding_multi_stride.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/rnn_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/split_axis2_split_number2.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/split_axis2_split_number4.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/split_axis3_split_number5.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_100.nnmodelgolden


type: file
name:
  /usr/lib64/python3.14/site-packages/SCons/Tool/docbook/docbook-xsl-1.76.1/epub/bin/xslt/obfuscate.xsl


type: file
name:
  /usr/lib64/python3.14/site-packages/SCons/Tool/docbook/docbook-xsl-1.76.1/tools/bin/docbook-xsl-update


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_none/config.xml


type: dir
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_use_decoration_invalid


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_use_decoration_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_mouse_event_not_bool/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_height_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_height_ood/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_width_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_touch_effect_not_bool/config.xml


