# changelog

author: olaf@aepfle.de
changelog:
  - 2015.02.03
  - Trim .TH also in perl man pages (bnc#915941)
  - Trim first line of man page to catch overly verbose tools
  - Use correct offset for patching mtime out of .pyc files
  - Add BuildIgnore to allow bootstrap in sle11


author: olaf@aepfle.de
changelog:
  - 2015.02.04
  - Handle ruby gem files, they are tar archives (bnc#916047)
  - Remove Creator: and CreationDate: tags from .ps files (bnc#915952)
  - Correct regex for hostname in libtool (bnc#916268)


author: olaf@aepfle.de
changelog:
  - 2015.02.06
  - Remove more javadoc references (bnc#916161)
  - Handle *.war files like *.jar files
  - Trim name-version-release string in update-scripts


author: randy.e.witt@linux.intel.com
changelog:
  - Print section differences even if assembly has differences.
  - Add support for nested rpms.
  - Make rpm-check work for "packages" other than rpm.
  - Tell which section was different when doing ELF comparisons.
  - Error when one of the rpms is not found


author: olaf@aepfle.de
changelog:
  - 2015.02.10
  - Trim objdump output properly
  - Trim .TH also in localized man pages (bnc#915941)
  - Remove also DVIPSSource from .ps files


author: olaf@aepfle.de
changelog:
  - 2015.03.20
  - Convert correct png file before comparison
  - Avoid name clashes when comparing png files
  - Handle filename changes gracefully when comparing unknown filetypes
  - Use generic helper to compare png files


author: olaf@aepfle.de
changelog:
  - 2015.04.13
  - Show hint if pkg-diff.sh returns non-zero
  - Adjust intending in same-build-result.sh
  - Handle /usr/src/packages/OTHER
  - Handle "setuid directory"


author: olaf@aepfle.de
changelog:
  - 2015.04.28
  - Filter InitrdID in /linuxrc.config
  - Hexdump old and new file in parallel
  - Sort cpio file list with files to compare
  - Extract old and new files in parallel
  - Ignore block device nodes
  - Ignore character device nodes
  - Always clean tmpdir on exit in pkg-diff.sh
  - Handle squashfs files


author: puzel@novell.com
changelog:
  - update to ccache-3.0
    - notable changes:
    - The way the hashes are calculated has changed, so you won't get
    cache hits for compilation results stored by older ccache
    versions. Because of this, you might as well clear the old
    cache directory with `ccache --clear` if you want, unless you
    plan to keep using an older ccache version.
    - ccache now has a ``direct mode'' where it computes a hash of
    the source code (including all included files) and compiler
    options without running the preprocessor. By not running the
    preprocessor, CPU usage is reduced; the speed is somewhere
    between 1 and 5 times that of ccache running in traditional
    mode, depending on the circumstances. The speedup will be
    higher when I/O is fast (e.g., when files are in the disk
    cache).  The direct mode can be disabled by setting
    +CCACHE_NODIRECT+.
    - Support has been added for rewriting absolute paths to relative
    paths when hashing, in order to increase cache hit rate when
    building the same source code in different directories even
    when compiling with `-g` and when using absolute include
    directory paths. This is done by setting the `CCACHE_BASEDIR`
    environment variable to an absolute path that specifies which
    paths to rewrite.
    - Object files are now optionally stored compressed in the cache.
    The runtime cost is negligible, and more files will fit in the
    ccache directory and in the disk cache. Set `CCACHE_COMPRESS`
    to enable object file compression. Note that you can't use
    compression in combination with the hard link feature.
    - A `CCACHE_COMPILERCHECK` option has been added. This option
    tells ccache what compiler-identifying information to hash to
    ensure that results retrieved from the cache are accurate.
    Possible values are: none (don't hash anything), mtime (hash
    the compiler's mtime and size) and content (hash the content of
    the compiler binary). The default is mtime.
  - see /usr/share/doc/packages/ccache/NEWS.txt for complete
    release notes


author: puzel@novell.com
changelog:
  - update to ccache-3.0.1
    - bugfixes:
    - The statistics counter ``called for link'' is now correctly
      updated when linking with a single object file.
    - Fixed a problem with out-of-source builds.


author: puzel@novell.com
changelog:
  - update to ccache-3.1
    - features:
    - Added support for hashing the output of a custom command
      (e.g. `$compiler --version`) to identify the compiler
      instead of stat-ing or hashing the compiler binary.
    - Added support for caching compilations that use precompiled
      headers.
    - Locking of the files containing statistics counters is now
      done using symlinks instead of POSIX locks.
    - Manifest files are now updated without the need of taking
      locks.
    - Added `.cp` and `.CP` as known C++ suffixes.
    - Improved logging.
    - bugfixes:
    - Non-fatal error messages are now never printed to stderr but
      logged instead.
    - Fixed a bug affecting failing commands when `--ccache-skip` is
      used.
    - Made `--ccache-skip` work for all options.
    - EINTR is now handled correctly.


author: puzel@novell.com
changelog:
  - update to ccache-3.1.1
    - ccache now falls back to preprocessor mode when a non-regular
      include file (device, socket, etc) has been detected so that
      potential hanging due to blocking reads is avoided.
    - CRC errors are now detected when decompressing compressed files
      in the cache.
    - Fixed potential object file corruption race on NFS.
    - Minor documentation corrections.
    - Fixed configure detection of ar.
    - ccache development version (set by dev.mk) now works with gits
      whose `describe` command doesn't understand `--dirty`.


author: puzel@novell.com
changelog:
  - update to ccache-3.1.2
    - bail out on too hard compiler options '-fdump-*'
    - NULL return values from malloc/calloc of zero bytes are now
      handled correctly
    - improved documentation on which information is included in the
      hash sum
    - made the 'too new header file' test case work on file systems
      with unsynchronized clocks
    - the test suite now also works on systems that lack a /dev/zero


author: puzel@novell.com
changelog:
  - update to ccache-3.1.3
    - The -MFarg, -MTarg and -MQarg compiler options (i.e, without
      space between option and argument) are now handled correctly.


author: asterios.dramis@gmail.com
changelog:
  - update to ccache-3.1.4
    - Made a work-around for a bug in gzputc() in zlib 1.2.5.
    - Corrupt manifest files are now removed so that they won't block direct
      mode hits.
    - ccache now copes with file systems that don't know about symbolic links.
    - The file handle in now correctly closed on write error when trying to
      create a cache dir tag.
  - Spec file updates:
    - Changes based on rpmdevtools templates and spec-cleaner run.
    - Updated Summary: and %description.
    - Made it compile with external zlib instead of the bundled copy.
    - Added also the html files in the %doc section.


author: puzel@novell.com
changelog:
  - update to ccache-3.1.5
    - Added a new statistics counter named ``called for
      preprocessing''.
    - The original command line is now logged to the file specified
      with `CCACHE_LOGFILE`.
    - Improved error logging when system calls fail.
    - Added support for rewriting absolute paths in
      `-F`/`-iframework` GCC options.
    - Improved order of statistics counters in `ccache -s` output.
    - The `-MF`/`-MT`/`-MQ` options with concatenated argument are
      now handled correctly when they are last on the commandline.
    - ccache is now bug compatible with GCC for the `-MT`/`-MQ`
      options with concatenated arguments.
    - Fixed a minor memory leak.
    - Systems that lack (and don't need to be linked with) libm are
      now supported.


author: asterios.dramis@gmail.com
changelog:
  - update to ccache-3.1.6
    - Rewrite argument to --sysroot if CCACHE_BASEDIR is used.
    - Don't crash if getcwd() fails.
    - Fixed alignment of "called for preprocessing" counter.


author: Anas Nashif <anas.nashif@intel.com> submit/tizen/20130509.173821@7f395c5
changelog:
  - Set license using %license (4cd65558)
  - remove patches (7f395c54)
  - stdio          (272bfb8a)
  - remove patches (4f3ddb45)
  - add packaging  (b675d80d)


author: aj@suse.de
changelog:
  - Only remove file from catalog if it disappeared.
  - Do not use release numbers, they're not needed anymore.
  - Fix some rpmlint warnings: do not remove buildroot, use fdupes.


author: ke@suse.de
changelog:
  - spec: No longer Requires iso_ent (now Recommends) and xmlcharent
    (xml entities are shipped together with the DTD).


author: Rusty Lynch <rusty.lynch@intel.com> accepted/tizen_ivi_stable/20131116.085010@725b1e0
changelog:
  - TIVI-2017: create media and share directories
  - TIVI-2052: Create tizen dbspace directories
  - Add the creation of the app user home directory and soft link Add the developer home directory


author: coolo@suse.de
changelog:
  - update to 0.9.1
    - trying to support gentoo x86_64
    - -mcpu=native has to compile locally (gentoo bug 183586#c13)
    - don't compile C files with C++ compile if ICECC_CXX is set


author: coolo@suse.de
changelog:
  - update to 0.9.2 to include patches upstreamed
    - Add accessor for the hostname of the scheduler, so that we can
    show it in a tooltip in icemon in the future.
    - Only localize job if we find -Wa,.*-a[a-z]*= in an argument
    - also add accessor for network name
    - if called as "icecc" (i.e., not through a symlink) and the first
    argument starts with a slash, use that as the command to run.


author: coolo@suse.de
changelog:
  - Update to 0.9.4
    - don't leak file descriptor to create-env
    - don't use the shell to call simple commands
    - make a special exception for - in rest args (bnc#495786)
    - Fix way icecream changes permissions of /var/cache/icecream


author: coolo@novell.com
changelog:
  - Update to 0.9.5
    - fix: close the file descriptor (novell bug bnc#525799)
    - log PID even if no prefix is specified
    - allow get_msg() to fetch data from the kernel even if timeout is 0.
    - clean up event loop of gcc invocation
    - Install an "icerun" symlink that will serialize commands through
    icecream's local daemon


author: coolo@novell.com
changelog:
  - Update to 0.9.6
    - fix installation issues
    - add a value type of ticks in /proc - and make it long long
    - fix kFreeBSD build
    - fix run-failure with glibc 2.11
    - allow tgz as extension
    - support more local args (bnc#625621)


author: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org> upstream/1.3.1@be98490
changelog:
  * Fri Jun 14 2013 Anas Nashif <anas.nashif@intel.com> submit/tizen/20130509.181119@e374876
  - Provide libjpeg8-devel and fix groups


author: Patrick McCarty <patrick.mccarty@linux.intel.com> 86dca7a
changelog:
  - Fix ncurses build with tar 1.27: the -s option (equivalent to --same-order)
    can no longer be used with the -c option.


author: pascal.bleser@opensuse.org
changelog:
  - update to 1.35:
    * updated to SQLite 3.7.9
    * one small potential break case if you are using FTS4 and ^
  - cumulated changes from 1.34*:
    * adding an explicit dynamic_config => 1
    * bind_param SQL_INTEGER error now actually dies with RaiseError
    * CHANGES THAT MAY POSSIBLY BREAK YOUR OLD APPLICATIONS:
    - resolved RT#67581: bind_param SQL_INTEGER numifies value;
      now DBD::SQLite croaks if you explicitly specify datatype
      (with bind_param) and datatype mismatch happens
    - datatype set in the bind_param(_array) becomes sticky now
      (as per DBI spec); this potentially affects code depending on
      current undocumented and broken behavior
    * resolved RT#71311: binding output columns as SQL_BLOB returns nothing
    * fixed binding named parameters
    * moved check for bind_ph/is_inout so it always error-out
    * don't set imp_sth->stmt to NULL on error path
    * explained an issue of rollback with unfinished statements
    * made util/getsqlite.pl work properly for SQLite 3.7.5+
    * Cookbook: don't use globals
    * resolved RT#70135 and hopefully other mod_perl/CentOS issues like RT#63873
      and RT#47983


author: vcizek@suse.com
changelog:
  - update to 1.37
    - Updated to SQLite 3.7.12.1 (ISHIGAKI)
    - Tweaked Makefile.PL to behave better during the Bsymbolic
      check (HMBRAND)
    - Added SQLITE_WITHOUT_ZONEMALLOC for older MacOS X (ISHIGAKI)
    - Fix >32bit integer truncation and other sqlite_set_result
      condition issue (Yuriy Kaminskiy)
    - Fix integer overflow in passing argument to perl function
    - Convert unsigned -> int64 when possible (Yuriy Kaminskiy)
    - Turned datatype mismatch error (introduced in 1.34_02) into
      a warning (you can disable this warning by setting PrintWarn
      attribute to false). (ISHIGAKI)
    - Refactored sqlite_is_number to fix various corner cases
    - Downgraded SQLite to 3.7.9, as 3.7.10 turned out to be
      broken on the latest MacOS X (due to a missing symbol),
      and broke other modules that typically use temporary tables
      under a few environments too. As of this writing, would-be
      3.7.11 seems fine, but it would take another month to be
      released. (ISHIGAKI)
    * ** CHANGES THAT MAY POSSIBLY BREAK YOUR OLD APPLICATIONS ***
      Note that this release changed the default schema format
      number, that means newly created database files will be
      unreadable by SQLite version prior to 3.3.0 (2006-01-10)
      (or DBD::SQLite prior to 1.12) unless you explicitly issue
      "PRAGMA legacy_file_format=ON".
    - Enabled SQLITE_ENABLE_FTS4
    - Enabled SQLITE_ENABLE_STAT3
    - Resolved #73159: FTS tokenizer segfault (ISHIGAKI)
    - Resolved #73787: sqlite_see_if_its_a_number causes a buffer
      overflow (ISHIGAKI)
    - Resolved #73314 for DBD-SQLite: binding of 64bit integers fail
      on 1.34_02 (ISHIGAKI)
    - Implemented sqlite_trace and sqlite_profile methods for simpler
      tracing/profiling; use DBI_TRACE/DBI_PROFILE for more
      complicated cases (ISHIGAKI)


author: coolo@suse.com
changelog:
  - updated to 1.39
    1.39 Fri 31 May 2013
    - Production release, no changes from 1.38_05
    1.38_05 Fri 31 May 2013
    - OpenBSD doesn't like the previous _XOPEN_SOURCE hack (ISHIGAKI)
    - Disabled a unicode-related test for older perls (ISHIGAKI)
    1.38_04 Wed 29 May 2013
    - Tentatively defined _XOPEN_SOURCE under *BSD systems to see
      if it solves a compilation issue for threaded perls (ISHIGAKI)
    1.38_03 Mon 20 May 2013
    * ** NOTICE ON QUERY OPTIMIZER ENHANCEMENT ***
    - As of SQLite 3.7.15, SQLite's query optimizer was enhanced
      and the result order of a SELECT statement without an ORDER
      BY clause may be different from the one of the previous
      versions. If your applications or tests mistakenly depend
      on the arbitrary output order, they may be broken with this
      enhancement.
    - Updated to SQLite 3.7.17 (ISHIGAKI)
    - Fixed tests that mistakenly made invalid assumptions about
      the result order (ISHIGAKI)
    - Added a brief note on useful pragmata. (ISHIGAKI)
    - Resolved #85302: type fixes (ISHIGAKI)
    1.38_02 Thu 4 Apr 2013
    - Updated to SQLite 3.7.16.1 (ISHIGAKI)
    - Removed two obsolete pragma calls at login time (ISHIGAKI)
    - Resolved #80344: Set SQLITE_DISABLE_DIRSYNC on AIX (suggested
      by Steve Barnsley) (ISHIGAKI)
    - Resolved #81536: primary_key_info returns the wrong KEY_SEQ
      (VLYON)
    - Resolved #84027: Finalizer() not called in (D. Richard Hipp)
    - Resolved #84372: -Wpointer-sign warnings with utf8_hop
      (RURBAN)
    - Resolved #84373: Add test for RT #26775 "name)" key with
      DISTINCT (RURBAN/ISHIGAKI)
    - Resolved #70815: DBD::SQLite 1.33 build is broken under
      Solaris using Sun C (RURBAN)
    - Resolved #84380: Fix WINLIKE for mingw/msys (RURBAN)
    - Added a note on DBD::SQLite and File::Temp (suggested by
      TOKUHIROM) (ISHIGAKI)
    1.38_01 Mon 24 Sep 2012
    * ** CHANGES THAT MAY POSSIBLY BREAK YOUR OLD APPLICATIONS ***
    - Resolved #56444: immediate transaction should be on by
      default, and the doc be updated.
      If you really need the deferred transaction (which had long
      been the default), set sqlite_use_immediate_transaction
      to false explicitly. (ISHIGAKI)
    - Updated to SQLite 3.7.14 (ISHIGAKI)
    - Added support for foreign_key_info (DAMI/ISHIGAKI)
    - Added several methods to retrieve internal information such as
      table_column_metadata/db_filename/*_status (ISHIGAKI/VOVKASM)
    - Added sqlite_load_extension so that extensions can add
      functions internally (ISHIGAKI)
    - Resolved #77617: atoll () sometimes just is atol () (GAAS)
    - Resolved #48084: improper "require utf8" in tests (ISHIGAKI)
    - Resolved #77724: bug in primary_key_info with regard to column


author: coolo@suse.com
changelog:
  - updated to 1.40
    - NetBSD also doesn't like the _XOPEN_SOURCE hack (ISHIGAKI)
    - Resolved #86080: PATCH: statistics_info support (DDICK)


author: coolo@suse.com
changelog:
  - updated to 1.42
    - Switched to a production version. (ISHIGAKI)
    1.41_07 2014-03-13
    - Updated to SQLite 3.8.4.1, which fixed several obscure bugs on
      "ORDER BY" or "DISTINCT". (ISHIGAKI)
    1.41_06 2014-02-12
    - Updated to SQLite 3.8.3.1, which fixed a SQLite bug in 3.8.2
      (bundled in DBD::SQLite 1.41_04/5) that could cause queries to
      omit valid out rows. (ISHIGAKI)
    1.41_05 2014-01-22
    - Resolved #92322: Failure under heavily parallelized tests
      (ISHIGAKI)
    - Disabled Test::NoWarnings in a test
    1.41_04 2014-01-12
    - Updated to SQLite 3.8.2 (ISHIGAKI)
    - Resolved #90211: Error in documentation (Felix Li)
    - Resolved #89351: DBD-SQLite won't compile on Cygwin 64 bit
      (Warren Young++) (ISHIGAKI)
    - Tweaked sqlite_see_if_its_a_number not to guess data types of
      bind values with explicit type specification (via bind_param()
      etc) (mje++, ilmari++) (ISHIGAKI)
    1.41_03 2013-09-05
    - Updated to SQLite 3.8.0.2 (ISHIGAKI)
    1.41_02 2013-08-30
    - Updated to SQLite 3.8.0.1 to resolve #88228 (RIBASUSHI++)
      (ISHIGAKI)
    1.41_01 2013-08-27
    * ** NOTICE ON NEXT GENERATION QUERY PLANNER ***
    - As of SQLite 3.8.0, SQLite's query planner has been rewritten.
      According to the author, the new query planner should give
      exactly the same result (though perhaps with a little less CPU
      time spent planning) for simple queries, and for complex
      queries, it can in many cases provide a much faster answer.
      See http://www.sqlite.org/queryplanner-ng.html for details.
    * ** NOTICE ON PARTIAL INDICES ***
    - Database files created by SQLite 3.8.0 are still readable and
      writable by prior versions, but if you use partial indices
      introduced in SQLite 3.8.0, those files become unreadable and
      unwritable by older versions of (DBD::)SQLite. They'll be
      readable/writable again by dropping partial indices.
    - Resolved #87435: PATCH: statistics_info perldoc (DDICK)
    - Resolved #87297: URI filenames in DBD::SQLite (ISHIGAKI)


author: coolo@suse.com
changelog:
  - updated to 1.46
    see /usr/share/doc/packages/perl-DBD-SQLite/Changes
    1.46 2014-12-10
    - Switched to a production version. (ISHIGAKI)
    1.45_06 2014-11-26
    - Silenced a compile-time warning (Unescaped left brace
      in regex is deprecated) in PerlData virtual table
      under bleadperl
    1.45_05 2014-11-25
    - Updated to SQLite 3.8.7.2
    - Restored regexp support in PerlData virtual table
      by secure reimplementation using closure (DAMI++)
    1.45_04 2014-10-28
    * ** CHANGES THAT MAY POSSIBLY BREAK YOUR OLD APPLICATIONS ***
    - Changed to apply quotemeta() to parameters while building
      a query for a virtual table using PerlData for security.
      (RIBASUSHI++ and MAUKE++) (DAMI, ISHIGAKI)
    1.45_03 2014-10-25
    - Fixed regression of 0 as integer (ISHIGAKI)
    1.45_02 2014-10-23
    - Improved int overflow handling under 32bit strawberry perl
      (ISHIGAKI)
    1.45_01 2014-10-22
    - Updated to SQLite 3.8.7 (ISHIGAKI)
    - Resolved #76395 (hopefully): int values over 32 bit in length
      produce an error "datatype mismatch" (ISHIGAKI)
    1.44 2014-10-22
    - Switched to a production version. (ISHIGAKI)
    1.43_09 2014-10-20
    - Resolved #99583: Legacy DOS 8.3 filename support incompatible
      with SQLITE WAL journal mode (spotted by Pat Horton) (ISHIGAKI)
    - 1.43_07/08 were not VC6 compatible (ISHIGAKI)
    1.43_08 2014-08-21
    - Updated to SQLite 3.8.6, which should fix a unique index
      issue: see http://www.sqlite.org/src/info/9a6daf340df99ba93c
      for details (ISHIGAKI)
    1.43_07 2014-07-30
    - Resolved #97598: Crash on disconnect with virtual tables (FTS4)
      (patch and test code by Rob++) (ISHIGAKI)
    1.43_06 2014-07-22
    - Fixed compile error/warning for older perls (reported by ribasushi)
      (ISHIGAKI)
    1.43_05 2014-07-21
    - No significant code changes; removed unnecessary dependencies.
    1.43_04 2014-07-21
    * ** CHANGES THAT MAY POSSIBLY BREAK YOUR OLD APPLICATIONS ***
    - Resolved #96877: sql statements should be converted to utf8 (DAMI)
      If you set sqlite_unicode to true, SQL statements will be upgraded
      to avoid inconsistency between embedded params and bind params.
    - Resolved #96494: [PATCH] add SYSTEM TABLE to table_info() type
      list (MJP)
    - Supported virtual tables in Perl, and added two sample tables
      (DAMI++)
    1.43_03 2014-06-12
    - Updated to SQLite 3.8.5, which should fix query planner's
      issues in SQLite (ISHIGAKI)
    - Fixed busy_timeout to accept 0 to disable (reported by zdm)
      (ISHIGAKI)
    - Resolved #95511: primary_key_info fails to return names for
      named primary keys (Kenneth Kroenlein)
    - Resolved #96050: Segfault in disconnected sqlite_db_filename
      (reported by Alex Vandiver) (ISHIGAKI)
    1.43_02 2014-03-26
    - Limited -std=gnu99 to solaris gcc only, though it may be
      harmless in many cases (mattp++) (ISHIGAKI)
    1.43_01 2014-03-26
    - Added -std=gnu99 for solaris gcc users (reported by mattp++)
      (ISHIGAKI)


author: coolo@suse.com
changelog:
  - updated to 1.48
    see /usr/share/doc/packages/perl-DBD-SQLite/Changes
    1.48 2015-06-12
    - Switched to a production version. (ISHIGAKI)
    1.47_05 2015-05-08
    - Updated to SQLite 3.8.10
    1.47_04 2015-05-02
    - Used MY_CXT instead of a global variable
    1.47_03 2015-04-16
    - Added :all to EXPORT_TAGS in ::Constants
    1.47_02 2015-04-16
    - Updated to SQLite 3.8.9
    - Added DBD::SQLite::Constants, from which you can import any
      "useful" constants into your applications.
    - Removed previous Cygwin hack as SQLite 3.8.9 compiles well again
    - Now create_function/aggregate accepts an extra bit
      (SQLITE_DETERMINISTIC) for better performance.
    1.47_01 2015-02-17
    * ** (EXPERIMENTAL) CHANGES THAT MAY POSSIBLY BREAK YOUR OLD APPLICATIONS ***
    - Commented OPTIMIZE out of WriteMakefile (RT #94207).
      If your perl is not compiled with -O2, your DBD::SQLite may
      possibly behave differently under some circumstances.
      (This release is to find notable examples from CPAN Testers).
    - Set THREADSAFE to 0 under Cygwin to cope with an upstream
      regression since 3.8.7 (GH #7).
    - Updated to SQLite 3.8.8.2
    - Resolved #35449: Fast DBH->do (ptushnik, ISHIGAKI)


author: coolo@suse.com
changelog:
  - updated to 1.50
    see /usr/share/doc/packages/perl-DBD-SQLite/Changes
    1.50 2016-02-11
    - Switched to a production version.
    1.49_08 2016-01-30
    - no significant code changes
    - Resolved RT#111558: Virtual table tests depend on enhanced
      query syntax availability (vlmarek++)
    - Ingore FTS tests if FTS is not available
    1.49_07 2016-01-21
    - Updated to SQLite 3.10.2, which fixed a case-folding bug
      in the LIKE operator introduced in SQLite 3.10.0.
    1.49_06 2016-01-15
    - Updated to SQLite 3.10.1, which fixed an old bug that could
      generate incorrect results when a scalar subquery attempts
      to use the block sorting optimization.
    1.49_05 2016-01-11
    * ** CHANGES THAT MAY POSSIBLY BREAK YOUR OLD APPLICATIONS ***
    - Updated to SQLite 3.10.0.
      Because of the addition of LIKE/GLOB/REGEXP support on
      virtual tables, previous ::PerlData virtual table got broken.
      This is hopefully fixed by adding strlike/strglob functions
      to DBD::SQLite but if you use this virtual table, please
      test it carefully.
    - Now you can make a database connection read-only if you
      turn on the ReadOnly attribute when you connect. (RT #110439)
      If you set it after you connect to a database, DBD::SQLite
      warns because the database doesn't actually become read-only.
    - Improved ::Constants
    - to load DBD::SQLite by itself
    - to expose SQLITE_VERSION_NUMBER
    - introduced a few new (shorter) tags
    1.49_04 2015-11-24
    - Updated ::Constants
    - Fixed a sqlite version number in a test (GH-14; NANIS++)
    1.49_03 2015-11-05
    - Updated to SQLite 3.9.2, with JSON support
    1.49_02 2015-10-10
    - Added a workaround to resolve #106950 Extra warnings
      with savepoints (hopefully)
    - Not to run tests for table_column_metadata unless
      ENABLE_COLUMN_METADATA is set
    1.49_01 2015-08-04
    - Updated to SQLite 3.8.11.1
    - Resolved #106151 SAVEPOINT bug
    - Made sure to keep what's left in unprepared_statements when
      allow_multiple_statements is set. (GH #11)


author: chris@computersalat.de
changelog:
  - update to 1.613
    o Fixed Win32 prerequisite module from PathTools to File::Spec.
    o Changed attribute headings and fixed references in DBI pod (Martin J. Evans)
    o Corrected typos in DBI::FAQ and DBI::ProxyServer (Ansgar Burchardt)


author: anicka@suse.cz
changelog:
  - update to 1.614
    * Added $h->{AutoInactiveDestroy} as simpler safer form of
    $h->{InactiveDestroy}
    * Added ability for parallel testing "prove -j4 ..."
    * Added tests for delete in DBM
    * Added test for absolute filename as table to 51dbm_file
    * Added two initialization phases to DBI::DBD::SqlEngine
    * Added improved developers documentation for DBI::DBD::SqlEngine
    * Added guides how to write DBI drivers using DBI::DBD::SqlEngine
    or DBD::File
    * Added register_compat_map() and table_meta_attr_changed() to
    DBD::File::Table
    * bugfixes, test fixes


author: vcizek@novell.com
changelog:
  - update to 1.616
    * Fixed RT#61513 by catching attribute assignment to tied table access
      interface (Jens Rehsack)
    * Fixed compiler warnings RT#62640
    * Optimized connect() to remove redundant FETCH of \%attrib values.
    Improved initialization phases in DBI::DBD::SqlEngine (Jens Rehsack)
    * Added DBD::Gofer::Transport::corostream. An experimental proof-of-concept
      transport that enables asynchronous database calls with few code changes.
      It enables asynchronous use of DBI frameworks like DBIx::Class.


author: vcizek@suse.com
changelog:
  - update to 1.617
    * Fixed ParamTypes example in the pod (Martin J. Evans)
    * Fixed the definition of ArrayTupleStatus and remove confusion over
      rows affected in list context of execute_array (Martin J. Evans)
    * Fixed sql_type_cast example and typo in errors (Martin J. Evans)
    * Fixed Gofer error handling for keeperr methods like ping (Tim Bunce)
    * Fixed $dbh->clone({}) RT73250 (Tim Bunce)
    * Fixed is_nested_call logic error RT73118 (Reini Urban)
    * Enhanced performance for threaded perls (Dave Mitchell, Tim Bunce)
    * Enhanced and standardized driver trace level mechanism (Tim Bunce)
    * Removed old code that was an inneffective attempt to detect
      people doing DBI->{Attrib}.
    * Clear ParamValues on bind_param param count error RT66127 (Tim Bunce)
    * Changed DBI::ProxyServer to require DBI at compile-time RT62672 (Tim Bunce)
    * Added pod for default_user to DBI::DBD (Martin J. Evans)
    * Added CON, ENC and DBD trace flags and extended 09trace.t (Martin J. Evans)
    * Added TXN trace flags and applied CON and TXN to relevant methods (Tim Bunce)
    * Added some more fetchall_arrayref(..., $maxrows) tests (Tim Bunce)
    * Clarified docs for fetchall_arrayref called on an inactive handle.
    * Clarified docs for clone method (Tim Bunce)
    * Added note to DBI::Profile about async queries (Marcel Grunauer).
    * Reserved spatialite_ as a driver prefix for DBD::Spatialite
    * Reserved mo_ as a driver prefix for DBD::MO
    * Updated link to the SQL Reunion 95 docs, RT69577 (Ash Daminato)
    * Changed links for DBI recipes. RT73286 (Martin J. Evans)


author: coolo@suse.com
changelog:
  - updated to 1.627
    Fixed VERSION regression in DBI::SQL::Nano [Tim Bunce]
    Fixed pod text/link was reversed in a few cases RT#85168
    Handle aliasing of STORE'd attributes in DBI::DBD::SqlEngine
    Updated repository URI to git [Jens Rehsack]
    Fixed skip() count arg in t/48dbi_dbd_sqlengine.t [Tim Bunce]
    Fixed heap-use-after-free during global destruction RT#75614
      thanks to Reini Urban.
    Fixed ignoring RootClass attribute during connect() by
      DBI::DBD::SqlEngine reported in RT#84260 by Michael Schout
    Fixed Gofer for hash randomization in perl 5.17.10+ RT#84146
    Clarify docs for can() re RT#83207
    Fixed RT#64330 - ping wipes out errstr (Martin J. Evans).
    Fixed RT#75868 - DBD::Proxy shouldn't call connected() on the server.
    Fixed RT#80474 - segfault in DESTROY with threads.
    Fixed RT#81516 - Test failures due to hash randomisation in perl 5.17.6
      thanks to Jens Rehsack and H.Merijn Brand and feedback on IRC
    Fixed RT#81724 - Handle copy-on-write scalars (sprout)
    Fixed unused variable / self-assignment compiler warnings.
    Fixed default table_info in DBI::DBD::SqlEngine which passed NAMES
      attribute instead of NAME to DBD::Sponge RT72343 (Martin J. Evans)
    Corrected a spelling error thanks to Chris Sanders.
    Corrected typo in DBI->installed_versions docs RT#78825
      thanks to Jan Dubois.
    Refactored table meta information management from DBD::File into
      DBI::DBD::SqlEngine (H.Merijn Brand, Jens Rehsack)
    Prevent undefined f_dir being used in opendir (H.Merijn Brand)
    Added logic to force destruction of children before parents
      during global destruction. See RT#75614.
    Added DBD::File Plugin-Support for table names and data sources
      (Jens Rehsack, #dbi Team)
    Added new tests to 08keeperr for RT#64330


author: coolo@suse.com
changelog:
  - updated to 1.628
      Fixed missing fields on partial insert via DBI::DBD::SqlEngine
      engines (DBD::CSV, DBD::DBM etc.) [H.Merijn Brand, Jens Rehsack]
      Fixed stack corruption on callbacks RT#85562 RT#84974 [Aaron Schweiger]
      Fixed DBI::SQL::Nano_::Statement handling of "0" [Jens Rehsack]
      Fixed exit op precedence in test RT#87029 [Reni Urban]
      Added support for finding tables in multiple directories
      via new DBD::File f_dir_search attribute [H.Merijn Brand]
      Enable compiling by C++ RT#84285 [Kurt Jaeger]
      Typo fixes in pod and comment [David Steinbrunner]
      Change DBI's docs to refer to git not svn [H.Merijn Brand]
      Clarify bind_col TYPE attribute is sticky [Martin J. Evans]
      Fixed reference to $sth in selectall_arrayref docs RT#84873
      Spelling fixes [Ville Skytt344]
      Changed $VERSIONs to hardcoded strings [H.Merijn Brand]


author: Anas Nashif <anas.nashif@intel.com> accepted/tizen/20130710.215023@f56f704
changelog:
  - clean up groups/license
  - fix gcc 4.8 incompatibility
  - resetting manifest requested domain to floor


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.0-1
changelog:
  - Update to 2.0.
  - Adjusted source URL.
  - License changed to BSD only.
  - Upstream now provides a script to run markdown from the cmdline.


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.0.1-3
changelog:
  - Add requirement on python-elementtree, which was a separate package
    before Python 2.5.
  - Re-add changelog entries accidentally removed earlier.


author: Anas Nashif <anas.nashif@intel.com> accepted/tizen/20130520.094313@a3c78e0
changelog:
  - update macros from project conf
  - Security plugin: Adding configuration option --disable-dchecks
  - Security-plugin: Fix the null pointer comparison  possibility in msmXattrSupport
  - Set license using %license
  - Fix 32bit kernel builds by not using eu-strip
  - Cleaning up code identation
  - Fix the missing path prefix for Plugin init hook
  - Fixes to rpm security plugin  - stricter control over smack64exec label assigment  - strciter control over dbus interface labels
  - Add VCS tag into .src.rpm
  - add find-provides.ksyms


author: Anas Nashif <anas.nashif@intel.com> accepted/tizen/20130710.214747@675aeea
changelog:
  - Security plugin: support for --root option
  - Security plugin: pkg_name allocation in conflict
  - Security plugin: allowing multiple domains definition
  - resetting manifest requested domain to floor
  - update changelog


author: Anas Nashif <anas.nashif@intel.com> submit/tizen/20130820.223822@6ec9c11
changelog:
  - Security plugin: small fixes
  - Security plugin: removing disable-dchecks option
  - update changes and release


author: Rusty Lynch <rusty.lynch@intel.com> accepted/tizen/20131108.201843@93d4902
changelog:
  - Fix rpmlint error
  - PTREL-155: fix build python-rpm
  - armv7l:fix faulty line in rpmrc.in
  - msm: check libxml/{xmlreader,tree}.h
  - Security plugin: Removing definition of System domain from default device policy


author: Mikko Ylinen <mikko.ylinen@intel.com> accepted/tizen/generic/20140106.135159@e9e247d
changelog:
  - MSM: fix access type length and validation
  - Security plugin: change policy to advisory
  - Security plugin: adding support for l access type


author: Patrick McCarty <patrick.mccarty@linux.intel.com> 940f59b
changelog:
  - Add three new RPM macros to use in packages with build dependencies on a
    platform's kernel and/or kernel-devel package. The macros are
    '%kernel_devel_uname_r', '%kernel_release', and '%kernel_name'.


author: Patrick McCarty <patrick.mccarty@linux.intel.com> d9be8fb
changelog:
  - Add a user and group for polkitd, needed by the polkit package.
  - Make /etc/mtab a symbolic link to /proc/self/mounts, as systemd and
    util-linux tools expect.
  - Added missing systemd-journal group, required to fix systemd tmpfiles.d
    functionality.


author: Patrick McCarty <patrick.mccarty@linux.intel.com> 782b3e2
changelog:
  - Add packaging
  - use openat if available
  - Fix udev rules directory location
  - disable rds compilation
  - (TZPC-3088) Import upstream version 0.9.8, for Tizen SDK support


author: Ryan Ware <ware@linux.intel.com> upstream/1.2.19@3449eaf
changelog:
  - Move to xmlsec1 1.2.19 from 1.2.14 to address CVE-2011-1425
  - resetting manifest requested domain to floor
  - Set license using %license
  - add Tizen patch to support keys
  - move down to 1.2.14
  - remove docs
  - add packaging
  - add packaging


