[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 015f09843c48 started "build python-ply.spec" at Wed Aug 13 12:28:34 UTC 2025. [ 0s] [ 0s] Building python-ply for project 'Tizen-Base-SC' repository 'standard' arch 'armv7l' srcmd5 '90b737acd42a572116b40ab63ae1faa5' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/python-ply.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/python-ply.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/python-ply.spec build ... [ 2s] registering binfmt handlers for cross build [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] [1/42] preinstalling libmagic-data... [ 5s] [2/42] preinstalling libncurses... [ 5s] [3/42] preinstalling setup... [ 5s] [4/42] preinstalling filesystem... [ 5s] [5/42] preinstalling glibc... [ 6s] [6/42] preinstalling libgcc... [ 6s] [7/42] preinstalling bash... [ 6s] [8/42] preinstalling diffutils... [ 7s] [9/42] preinstalling grep... [ 7s] [10/42] preinstalling libattr... [ 7s] [11/42] preinstalling libblkid... [ 7s] [12/42] preinstalling libbz2... [ 7s] [13/42] preinstalling libcap... [ 8s] [14/42] preinstalling libfreebl3... [ 8s] [15/42] preinstalling liblua... [ 8s] [16/42] preinstalling liblzma... [ 8s] [17/42] preinstalling libpopt... [ 9s] [18/42] preinstalling libreadline... [ 9s] [19/42] preinstalling libsmack... [ 9s] [20/42] preinstalling libsqlite... [ 9s] [21/42] preinstalling libuuid... [ 10s] [22/42] preinstalling libxcrypt... [ 10s] [23/42] preinstalling libxml2... [ 10s] [24/42] preinstalling libzstd1... [ 10s] [25/42] preinstalling nspr... [ 11s] [26/42] preinstalling sed... [ 11s] [27/42] preinstalling zlib... [ 11s] [28/42] preinstalling qemu-accel-x86_64-armv7l... [ 27s] [29/42] preinstalling qemu-linux-user-x86_64-cross... [ 31s] [30/42] preinstalling coreutils... [ 32s] [31/42] preinstalling libacl... [ 32s] [32/42] preinstalling libelf... [ 32s] [33/42] preinstalling libmount... [ 32s] [34/42] preinstalling smack... [ 32s] [35/42] preinstalling bzip2... [ 32s] [36/42] preinstalling libmagic... [ 32s] [37/42] preinstalling tar... [ 32s] [38/42] preinstalling util-linux... [ 32s] [39/42] preinstalling util-linux-su... [ 32s] [40/42] preinstalling nss... [ 32s] [41/42] preinstalling libsoftokn3... [ 32s] [42/42] preinstalling rpm... [ 33s] running qemu-linux-user-x86_64-cross postinstall script [ 33s] running qemu-accel-x86_64-armv7l postinstall script [ 33s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 33s] running setup postinstall script [ 33s] chroot: failed to run command '': No such file or directory [ 33s] initializing rpm db... [ 34s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 34s] breaking dependency libxcrypt-devel -> glibc-devel [ 34s] cycle: libsoftokn3 -> nss [ 34s] breaking dependency nss -> libsoftokn3 [ 34s] done [ 34s] querying package ids... [ 34s] [1/108] cumulate libmagic-data-5.45-1.3 [ 34s] [2/108] cumulate setup-0.9-1.1 [ 34s] [3/108] cumulate filesystem-3.1-1.1 [ 34s] [4/108] cumulate glibc-2.40-1.6 [ 34s] [5/108] cumulate libatomic-14.2.0-1.6 [ 34s] [6/108] cumulate libgcc-14.2.0-1.6 [ 34s] [7/108] cumulate bash-3.2.57-1.1 [ 34s] [8/108] cumulate cpio-2.8-1.1 [ 34s] [9/108] cumulate diffutils-3.10-1.1 [ 34s] [10/108] cumulate fdupes-2.2.1-1.6 [ 34s] [11/108] cumulate findutils-4.3.8-1.5 [ 34s] [12/108] cumulate gdbm-1.8.3-1.6 [ 34s] [13/108] cumulate hostname-3.23-1.1 [ 34s] [14/108] cumulate libattr-2.5.1-1.5 [ 34s] [15/108] cumulate libblkid-2.39.3-1.4 [ 34s] [16/108] cumulate libbz2-1.0.8-1.6 [ 34s] [17/108] cumulate libcap-2.73-1.5 [ 34s] [18/108] cumulate libfreebl3-3.109-1.6 [ 34s] [19/108] cumulate libgfortran-14.2.0-1.6 [ 34s] [20/108] cumulate libgomp-14.2.0-1.6 [ 34s] [21/108] cumulate libitm-14.2.0-1.6 [ 34s] [22/108] cumulate libltdl-2.4.7-1.6 [ 34s] [23/108] cumulate liblua-5.1.5-1.3 [ 34s] [24/108] cumulate liblzma-5.6.3-1.6 [ 34s] [25/108] cumulate libopenssl11-1.1.1w-1.6 [ 34s] [26/108] cumulate libpcre-8.45-1.4 [ 34s] [27/108] cumulate libpopt-1.16-1.3 [ 34s] [28/108] cumulate libpython-2.7.18-1.5 [ 34s] [29/108] cumulate libsmack-1.3.1-1.3 [ 34s] [30/108] cumulate libsmartcols-2.39.3-1.4 [ 34s] [31/108] cumulate libsqlite-3.48.0-1.4 [ 34s] [32/108] cumulate libstdc++-14.2.0-1.6 [ 34s] [33/108] cumulate libuuid-2.39.3-1.4 [ 34s] [34/108] cumulate libxcrypt-4.4.36-1.6 [ 34s] [35/108] cumulate libxml2-2.13.5-1.5 [ 34s] [36/108] cumulate libzstd1-1.5.6-1.5 [ 34s] [37/108] cumulate m4-1.4.19-1.1 [ 34s] [38/108] cumulate net-tools-2.0_20121208git-1.3 [ 34s] [39/108] cumulate nspr-4.36-1.3 [ 34s] [40/108] cumulate patch-2.7.6-1.3 [ 34s] [41/108] cumulate pkg-config-0.29.2-1.5 [ 34s] [42/108] cumulate sed-4.1c-1.3 [ 34s] [43/108] cumulate update-alternatives-1.22.2-1.1 [ 34s] [44/108] cumulate which-2.17-1.1 [ 34s] [45/108] cumulate zlib-1.3.1-1.5 [ 34s] [46/108] cumulate build-compare-2023.06.18-1.1 [ 34s] [47/108] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 34s] [48/108] cumulate libstdc++-devel-14.2.0-1.6 [ 34s] [49/108] cumulate qemu-linux-user-x86_64-cross-8.2.2.1-1.1 [ 34s] [50/108] cumulate cpp-14.2.0-1.6 [ 34s] [51/108] cumulate gcc-c++-14.2.0-1.6 [ 34s] [52/108] cumulate binutils-libs-2.43-1.6 [ 34s] [53/108] cumulate coreutils-6.9-14.1 [ 34s] [54/108] cumulate db4-4.8.30.NC-1.6 [ 34s] [55/108] cumulate gawk-3.1.5-1.1 [ 34s] [56/108] cumulate grep-2.5.2-1.3 [ 34s] [57/108] cumulate libacl-2.3.2-1.4 [ 34s] [58/108] cumulate libcc1-14.2.0-1.6 [ 34s] [59/108] cumulate libelf-0.189-1.6 [ 34s] [60/108] cumulate libmount-2.39.3-1.4 [ 34s] [61/108] cumulate libubsan-14.2.0-1.6 [ 34s] [62/108] cumulate make-4.4.1-1.4 [ 34s] [63/108] cumulate nss-certs-3.109-1.6 [ 34s] [64/108] cumulate smack-1.3.1-1.3 [ 34s] [65/108] cumulate bzip2-1.0.8-1.6 [ 34s] [66/108] cumulate libfdisk-2.39.3-1.4 [ 34s] [67/108] cumulate libmagic-5.45-1.3 [ 34s] [68/108] cumulate xz-5.6.3-1.6 [ 34s] [69/108] cumulate perl-5.38.0-1.5 [ 34s] [70/108] cumulate build-mkbaselibs-20120927-1.1 [ 34s] [71/108] cumulate linux-glibc-devel-6.6-1.6 [ 34s] [72/108] cumulate terminfo-base-full-6.4-1.6 [ 34s] [73/108] cumulate autoconf-2.71-1.6 [ 34s] [74/108] cumulate file-5.45-1.3 [ 34s] [75/108] cumulate glibc-locale-2.40-1.6 [ 34s] [76/108] cumulate tar-1.17-1.1 [ 34s] [77/108] cumulate binutils-2.43-1.6 [ 34s] [78/108] cumulate gzip-1.3.12-1.3 [ 34s] [79/108] cumulate pam-1.1.6-1.4 [ 34s] [80/108] cumulate tzdata-2024b-1.1 [ 34s] [81/108] cumulate libdw-0.189-1.6 [ 34s] [82/108] cumulate libarchive-3.7.7-1.5 [ 34s] [83/108] cumulate gcc-14.2.0-1.6 [ 34s] [84/108] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 34s] [85/108] cumulate automake-1.16.5-1.6 [ 34s] [86/108] cumulate libasm-0.189-1.6 [ 34s] [87/108] cumulate libncurses6-6.4-1.6 [ 34s] [88/108] cumulate build-20120927-1.1 [ 34s] [89/108] cumulate libncurses-6.4-1.6 [ 34s] [90/108] cumulate less-668-1.1 [ 34s] [91/108] cumulate libreadline-5.2-1.5 [ 34s] [92/108] cumulate libtool-2.4.7-1.6 [ 34s] [93/108] cumulate elfutils-0.189-1.6 [ 34s] [94/108] cumulate python-2.7.18-1.5 [ 34s] [95/108] cumulate util-linux-2.39.3-1.4 [ 34s] [96/108] cumulate python-pyparsing-2.2.0-1.1 [ 34s] [97/108] cumulate python-six-1.15.0-1.1 [ 34s] [98/108] cumulate python-appdirs-1.4.0-1.1 [ 34s] [99/108] cumulate python-xml-2.7.18-1.5 [ 34s] [100/108] cumulate util-linux-su-2.39.3-1.4 [ 34s] [101/108] cumulate python-packaging-20.8-1.1 [ 34s] [102/108] cumulate python-setuptools-44.1.1-1.1 [ 34s] [103/108] cumulate libxcrypt-devel-4.4.36-1.6 [ 34s] [104/108] cumulate nss-3.109-1.6 [ 34s] [105/108] cumulate glibc-devel-2.40-1.6 [ 34s] [106/108] cumulate libsoftokn3-3.109-1.6 [ 34s] [107/108] cumulate rpm-4.14.1.1-1.6 [ 34s] [108/108] cumulate rpm-build-4.14.1.1-1.6 [ 34s] now installing cumulated packages [ 35s] Preparing... ######################################## [ 35s] Updating / installing... [ 36s] setup-0.9-1.1 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 36s] ########################## [ 36s] filesystem-3.1-1.1 ######################################## [ 36s] libmagic-data-5.45-1.3 ######################################## [ 36s] glibc-2.40-1.6 ######################################## [ 37s] libgcc-14.2.0-1.6 ######################################## [ 37s] bash-3.2.57-1.1 ######################################## [ 37s] zlib-1.3.1-1.5 ######################################## [ 38s] coreutils-6.9-14.1 ######################################## [ 38s] libstdc++-14.2.0-1.6 ######################################## [ 38s] libbz2-1.0.8-1.6 ######################################## [ 39s] libelf-0.189-1.6 ######################################## [ 39s] liblzma-5.6.3-1.6 ######################################## [ 39s] libxcrypt-4.4.36-1.6 ######################################## [ 39s] libdw-0.189-1.6 ######################################## [ 40s] libmagic-5.45-1.3 ######################################## [ 40s] libblkid-2.39.3-1.4 ######################################## [ 40s] nspr-4.36-1.3 ######################################## [ 41s] pam-1.1.6-1.4 ######################################## [ 41s] libcap-2.73-1.5 ######################################## [ 41s] libfreebl3-3.109-1.6 ######################################## [ 42s] liblua-5.1.5-1.3 ######################################## [ 42s] libopenssl11-1.1.1w-1.6 ######################################## [ 42s] libpopt-1.16-1.3 ######################################## [ 43s] libpython-2.7.18-1.5 ######################################## [ 43s] libsqlite-3.48.0-1.4 ######################################## [ 43s] libuuid-2.39.3-1.4 ######################################## [ 43s] libzstd1-1.5.6-1.5 ######################################## [ 44s] linux-glibc-devel-6.6-1.6 ######################################## [ 44s] terminfo-base-full-6.4-1.6 ######################################## [ 44s] libncurses6-6.4-1.6 ######################################## [ 44s] libreadline-5.2-1.5 ######################################## [ 44s] libfdisk-2.39.3-1.4 ######################################## [ 45s] nss-certs-3.109-1.6 ######################################## [ 45s] libsoftokn3-3.109-1.6 ######################################## [ 45s] nss-3.109-1.6 ######################################## [ 45s] libmount-2.39.3-1.4 ######################################## [ 46s] libasm-0.189-1.6 ######################################## [ 46s] xz-5.6.3-1.6 ######################################## [ 46s] bzip2-1.0.8-1.6 ######################################## [ 46s] db4-4.8.30.NC-1.6 ######################################## [ 47s] python-2.7.18-1.5 ######################################## [ 48s] python-six-1.15.0-1.1 ######################################## [ 48s] python-pyparsing-2.2.0-1.1 ######################################## [ 48s] python-packaging-20.8-1.1 ######################################## [ 48s] python-appdirs-1.4.0-1.1 ######################################## [ 48s] python-xml-2.7.18-1.5 ######################################## [ 48s] libcc1-14.2.0-1.6 ######################################## [ 48s] libubsan-14.2.0-1.6 ######################################## [ 48s] gzip-1.3.12-1.3 ######################################## [ 48s] binutils-libs-2.43-1.6 ######################################## [ 49s] binutils-2.43-1.6 ######################################## [ 49s] make-4.4.1-1.4 ######################################## [ 49s] findutils-4.3.8-1.5 ######################################## [ 49s] gdbm-1.8.3-1.6 ######################################## [ 52s] perl-5.38.0-1.5 ######################################## [ 52s] build-mkbaselibs-20120927-1.1 ######################################## [ 52s] libattr-2.5.1-1.5 ######################################## [ 52s] libacl-2.3.2-1.4 ######################################## [ 52s] tar-1.17-1.1 ######################################## [ 52s] libgfortran-14.2.0-1.6 ######################################## [ 53s] libgomp-14.2.0-1.6 ######################################## [ 53s] libitm-14.2.0-1.6 ######################################## [ 53s] libltdl-2.4.7-1.6 ######################################## [ 54s] libpcre-8.45-1.4 ######################################## [ 54s] libsmack-1.3.1-1.3 ######################################## [ 54s] libsmartcols-2.39.3-1.4 ######################################## [ 55s] libxml2-2.13.5-1.5 ######################################## [ 55s] libarchive-3.7.7-1.5 ######################################## [ 56s] rpm-4.14.1.1-1.6 ######################################## [ 56s] m4-1.4.19-1.1 ######################################## [ 57s] autoconf-2.71-1.6 ######################################## [ 57s] automake-1.16.5-1.6 ######################################## [ 57s] patch-2.7.6-1.3 ######################################## [ 57s] pkg-config-0.29.2-1.5 ######################################## [ 57s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 57s] glibc-devel-2.40-1.6 ######################################## [ 57s] sed-4.1c-1.3 ######################################## [ 58s] util-linux-2.39.3-1.4 ######################################## [ 58s] libatomic-14.2.0-1.6 ######################################## [ 58s] libtool-2.4.7-1.6 ######################################## [ 58s] build-20120927-1.1 ######################################## [ 58s] python-setuptools-44.1.1-1.1 ######################################## [ 58s] libncurses-6.4-1.6 ######################################## [ 59s] libstdc++-devel-14.2.0-1.6 ######################################## [ 59s] build-compare-2023.06.18-1.1 ######################################## [ 59s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 62s] qemu-linux-user-x86_64-cross-8.2.2.1-1######################################## [ 65s] gcc-14.2.0-1.6 ######################################## [ 81s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 82s] rpm-build-4.14.1.1-1.6 ######################################## [ 82s] util-linux-su-2.39.3-1.4 ######################################## [ 82s] smack-1.3.1-1.3 ######################################## [ 82s] grep-2.5.2-1.3 ######################################## [ 82s] elfutils-0.189-1.6 ######################################## [ 82s] less-668-1.1 ######################################## [ 82s] file-5.45-1.3 ######################################## [ 83s] glibc-locale-2.40-1.6 ######################################## [ 83s] tzdata-2024b-1.1 ######################################## [ 85s] cpp-14.2.0-1.6 ######################################## [ 86s] gcc-c++-14.2.0-1.6 ######################################## [ 86s] gawk-3.1.5-1.1 ######################################## [ 86s] cpio-2.8-1.1 ######################################## [ 86s] diffutils-3.10-1.1 ######################################## [ 86s] fdupes-2.2.1-1.6 ######################################## [ 86s] hostname-3.23-1.1 ######################################## [ 86s] net-tools-2.0_20121208git-1.3 ######################################## [ 86s] update-alternatives-1.22.2-1.1 ######################################## [ 86s] which-2.17-1.1 ######################################## [ 87s] now finalizing build dir... [ 88s] ----------------------------------------------------------------- [ 88s] I have the following modifications for python-ply.spec: [ 88s] 4c4 [ 88s] < Release: 0 [ 88s] --- [ 88s] > Release: 1.1 [ 88s] build target is armv7l-tizen-linux [ 89s] ----------------------------------------------------------------- [ 89s] ----- building python-ply.spec (user abuild) [ 89s] ----------------------------------------------------------------- [ 89s] ----------------------------------------------------------------- [ 89s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-SC/standard/90b737acd42a572116b40ab63ae1faa5-python-ply' /home/abuild/rpmbuild/SOURCES/python-ply.spec [ 90s] Building target platforms: armv7l-tizen-linux [ 90s] Building for target armv7l-tizen-linux [ 90s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.iBxR6Q [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + rm -rf ply-3.11 [ 90s] + /bin/tar -xof - [ 90s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ply-3.11.tar.gz [ 90s] + STATUS=0 [ 90s] + '[' 0 -ne 0 ']' [ 90s] + cd ply-3.11 [ 90s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 90s] + echo 'Patch #0 (0001-Bump-to-python-ply-3.11.patch):' [ 90s] Patch #0 (0001-Bump-to-python-ply-3.11.patch): [ 90s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 90s] patching file LICENSE [ 90s] + cp /home/abuild/rpmbuild/SOURCES/python-ply.manifest . [ 90s] + chmod -x test/testlex.py [ 90s] + find example -type f -name '*.py' -exec sed -i 's|#!/usr/bin/env python||' '{}' + [ 90s] + _target= [ 90s] + _symlinks=0 [ 90s] + _files=() [ 90s] + read _file [ 90s] + fdupes -q -n -r example [ 90s] + exit 0 [ 90s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.OwQ4x1 [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd ply-3.11 [ 90s] + ref=/usr/lib/rpm [ 90s] + mints=0 [ 90s] + case $(uname -m) in [ 90s] ++ uname -m [ 90s] + for s in guess sub [ 90s] ++ find -maxdepth 8 -name config.guess [ 90s] + for s in guess sub [ 90s] ++ find -maxdepth 8 -name config.sub [ 90s] + LANG=C [ 90s] + export LANG [ 90s] + unset DISPLAY [ 90s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fstack-clash-protection -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 90s] + export CFLAGS [ 90s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fstack-clash-protection -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 90s] + export CXXFLAGS [ 90s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fstack-clash-protection -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 90s] + export FFLAGS [ 90s] + LDFLAGS= [ 90s] + export LDFLAGS [ 90s] + /bin/python2 setup.py build [ 93s] running build [ 93s] running build_py [ 93s] creating build [ 93s] creating build/lib [ 93s] creating build/lib/ply [ 93s] copying ply/yacc.py -> build/lib/ply [ 93s] copying ply/__init__.py -> build/lib/ply [ 93s] copying ply/lex.py -> build/lib/ply [ 93s] copying ply/cpp.py -> build/lib/ply [ 93s] copying ply/ctokens.py -> build/lib/ply [ 93s] copying ply/ygen.py -> build/lib/ply [ 93s] + exit 0 [ 93s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.mUiBU2 [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + cd ply-3.11 [ 93s] + LANG=C [ 93s] + export LANG [ 93s] + unset DISPLAY [ 93s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm [ 93s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm [ 93s] + /bin/python2 setup.py install --prefix=/usr --root=/home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm [ 95s] running install [ 95s] running build [ 95s] running build_py [ 95s] running install_lib [ 95s] creating /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr [ 95s] creating /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib [ 95s] creating /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7 [ 95s] creating /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages [ 95s] creating /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 95s] copying build/lib/ply/yacc.py -> /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 95s] copying build/lib/ply/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 95s] copying build/lib/ply/lex.py -> /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 95s] copying build/lib/ply/cpp.py -> /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 95s] copying build/lib/ply/ctokens.py -> /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 95s] copying build/lib/ply/ygen.py -> /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 95s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply/yacc.py to yacc.pyc [ 95s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply/__init__.py to __init__.pyc [ 95s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply/lex.py to lex.pyc [ 96s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply/cpp.py to cpp.pyc [ 96s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply/ctokens.py to ctokens.pyc [ 96s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply/ygen.py to ygen.pyc [ 96s] running install_egg_info [ 96s] running egg_info [ 96s] writing ply.egg-info/PKG-INFO [ 96s] writing top-level names to ply.egg-info/top_level.txt [ 96s] writing dependency_links to ply.egg-info/dependency_links.txt [ 96s] reading manifest file 'ply.egg-info/SOURCES.txt' [ 96s] reading manifest template 'MANIFEST.in' [ 96s] warning: no previously-included files matching '*.pyc' found anywhere in distribution [ 96s] writing manifest file 'ply.egg-info/SOURCES.txt' [ 96s] Copying ply.egg-info to /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply-3.11-py2.7.egg-info [ 96s] running install_scripts [ 96s] + _target= [ 96s] + _symlinks=0 [ 96s] + _files=() [ 96s] + read _file [ 96s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages [ 96s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 3.11-1.1 --unique-debug-src-base python-ply-3.11-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/ply-3.11 [ 97s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ply-3.11/python-ply-debuginfo.manifest [ 97s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ply-3.11/python-ply-debugsource.manifest [ 97s] + /usr/lib/rpm/check-buildroot [ 97s] + /usr/lib/rpm//brp-compress [ 97s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 97s] + /usr/lib/rpm/brp-python-hardlink [ 98s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm [ 98s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/ply-3.11/isu.list [ 98s] ~/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm ~/rpmbuild/BUILD/ply-3.11 [ 98s] ~/rpmbuild/BUILD/ply-3.11 [ 98s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 99s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.2E6NqY [ 99s] Processing files: python-ply-3.11-1.1.noarch [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ttRfPg [ 99s] + umask 022 [ 99s] + cd /home/abuild/rpmbuild/BUILD [ 99s] + cd ply-3.11 [ 99s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/share/licenses/python-ply [ 99s] + export LC_ALL=C [ 99s] + LC_ALL=C [ 99s] + export LICENSEDIR [ 99s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/share/licenses/python-ply [ 99s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/share/licenses/python-ply [ 99s] + exit 0 [ 100s] Provides: python-ply = 3.11-1.1 [ 100s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 100s] Requires: python(abi) = 2.7 [ 100s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm [ 100s] Wrote: /home/abuild/rpmbuild/SRPMS/python-ply-3.11-1.1.src.rpm [ 101s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python-ply-3.11-1.1.noarch.rpm [ 101s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.9JGkKR [ 101s] + umask 022 [ 101s] + cd /home/abuild/rpmbuild/BUILD [ 101s] + cd ply-3.11 [ 101s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm [ 101s] + exit 0 [ 101s] ... checking for files with abuild user/group [ 101s] ... creating baselibs [ 102s] [ 102s] 015f09843c48 finished "build python-ply.spec" at Wed Aug 13 12:30:16 UTC 2025. [ 102s]