[    0s] on X86_64, no limit mem size
[    0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.13
[    0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel
[    0s] 
[    0s] 
[    0s] 9d78050e774c started "build perl-DBD-SQLite.spec" at Tue Dec 17 04:51:40 UTC 2024.
[    0s] 
[    0s] Building perl-DBD-SQLite for project 'Tizen-Base-Toolchain' repository 'standard' arch 'armv7l' srcmd5 '4fb418fbb3d4945c6ef63c7af57f58a8'
[    0s] 
[    0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.13/.build-srcdir/perl-DBD-SQLite.spec ...
[    1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.13/.build-srcdir/perl-DBD-SQLite.spec
[    1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/13/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.13/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.13/.build-srcdir/perl-DBD-SQLite.spec build ...
[    2s] registering binfmt handlers for cross build
[    2s] cycle: nss -> libsoftokn3
[    2s]   breaking dependency nss -> libsoftokn3
[    2s] [1/42] preinstalling libmagic-data...
[    3s] [2/42] preinstalling libncurses...
[    3s] [3/42] preinstalling setup...
[    3s] [4/42] preinstalling filesystem...
[    3s] [5/42] preinstalling glibc...
[    3s] [6/42] preinstalling libgcc...
[    3s] [7/42] preinstalling bash...
[    4s] [8/42] preinstalling diffutils...
[    4s] [9/42] preinstalling grep...
[    4s] [10/42] preinstalling libattr...
[    4s] [11/42] preinstalling libblkid...
[    4s] [12/42] preinstalling libbz2...
[    4s] [13/42] preinstalling libcap...
[    4s] [14/42] preinstalling libfreebl3...
[    4s] [15/42] preinstalling liblua...
[    4s] [16/42] preinstalling liblzma...
[    4s] [17/42] preinstalling libpopt...
[    4s] [18/42] preinstalling libreadline...
[    4s] [19/42] preinstalling libsmack...
[    5s] [20/42] preinstalling libsqlite...
[    5s] [21/42] preinstalling libuuid...
[    5s] [22/42] preinstalling libxcrypt...
[    5s] [23/42] preinstalling libzstd1...
[    5s] [24/42] preinstalling nspr...
[    5s] [25/42] preinstalling sed...
[    5s] [26/42] preinstalling zlib...
[    5s] [27/42] preinstalling qemu-accel-x86_64-armv7l...
[   28s] [28/42] preinstalling qemu-linux-user-x86_64-cross...
[   33s] [29/42] preinstalling coreutils...
[   34s] [30/42] preinstalling libacl...
[   34s] [31/42] preinstalling libelf...
[   34s] [32/42] preinstalling libmount...
[   34s] [33/42] preinstalling smack...
[   34s] [34/42] preinstalling bzip2...
[   34s] [35/42] preinstalling libmagic...
[   34s] [36/42] preinstalling libxml2...
[   34s] [37/42] preinstalling tar...
[   34s] [38/42] preinstalling util-linux...
[   35s] [39/42] preinstalling util-linux-su...
[   35s] [40/42] preinstalling nss...
[   35s] [41/42] preinstalling libsoftokn3...
[   35s] [42/42] preinstalling rpm...
[   36s] running qemu-linux-user-x86_64-cross postinstall script
[   36s] running qemu-accel-x86_64-armv7l postinstall script
[   36s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory
[   36s] running setup postinstall script
[   36s] chroot: failed to run command '<lua>': No such file or directory
[   36s] initializing rpm db...
[   37s] reordering...cycle: libxcrypt-devel -> glibc-devel
[   37s]   breaking dependency libxcrypt-devel -> glibc-devel
[   37s] cycle: libsoftokn3 -> nss
[   37s]   breaking dependency nss -> libsoftokn3
[   37s] done
[   37s] querying package ids...
[   38s] [1/99] cumulate libmagic-data-5.45-1.19
[   38s] [2/99] cumulate setup-0.9-1.12
[   38s] [3/99] cumulate filesystem-3.1-1.1
[   38s] [4/99] cumulate glibc-2.40-1.1
[   38s] [5/99] cumulate libatomic-14.2.0-1.3
[   38s] [6/99] cumulate libgcc-14.2.0-1.3
[   38s] [7/99] cumulate bash-3.2.57-1.3
[   38s] [8/99] cumulate cpio-2.8-1.4
[   38s] [9/99] cumulate diffutils-3.10-1.3
[   38s] [10/99] cumulate findutils-4.3.8-1.19
[   38s] [11/99] cumulate gdbm-1.8.3-1.29
[   38s] [12/99] cumulate hostname-3.23-1.4
[   38s] [13/99] cumulate libattr-2.5.1-1.19
[   38s] [14/99] cumulate libblkid-2.39.3-1.16
[   38s] [15/99] cumulate libbz2-1.0.8-1.21
[   38s] [16/99] cumulate libcap-2.69-1.19
[   38s] [17/99] cumulate libfreebl3-3.98-1.28
[   38s] [18/99] cumulate libgfortran-14.2.0-1.3
[   38s] [19/99] cumulate libgomp-14.2.0-1.3
[   38s] [20/99] cumulate libitm-14.2.0-1.3
[   38s] [21/99] cumulate libltdl-2.4.7-1.28
[   38s] [22/99] cumulate liblua-5.1.5-1.18
[   38s] [23/99] cumulate liblzma-5.4.5-1.29
[   38s] [24/99] cumulate libopenssl3-3.0.13-1.29
[   38s] [25/99] cumulate libpcre-8.45-1.18
[   38s] [26/99] cumulate libpopt-1.16-1.18
[   38s] [27/99] cumulate libsmack-1.3.1-1.18
[   38s] [28/99] cumulate libsmartcols-2.39.3-1.16
[   38s] [29/99] cumulate libsqlite-3.44.0-1.18
[   38s] [30/99] cumulate libstdc++-14.2.0-1.3
[   38s] [31/99] cumulate libuuid-2.39.3-1.16
[   38s] [32/99] cumulate libxcrypt-4.4.36-1.26
[   38s] [33/99] cumulate libzstd1-1.5.5-1.20
[   38s] [34/99] cumulate m4-1.4.19-1.3
[   38s] [35/99] cumulate net-tools-2.0_20121208git-1.18
[   38s] [36/99] cumulate nspr-4.35-1.18
[   38s] [37/99] cumulate patch-2.7.6-1.18
[   38s] [38/99] cumulate pkg-config-0.29.2-1.21
[   38s] [39/99] cumulate sed-4.1c-1.18
[   38s] [40/99] cumulate update-alternatives-1.22.2-1.3
[   38s] [41/99] cumulate which-2.17-1.4
[   38s] [42/99] cumulate zlib-1.3-1.26
[   38s] [43/99] cumulate build-compare-2023.06.18-1.12
[   38s] [44/99] cumulate hal-rootstrap-checker-0.1.0-1.1
[   38s] [45/99] cumulate libstdc++-devel-14.2.0-1.3
[   38s] [46/99] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-23.7
[   38s] [47/99] cumulate cpp-14.2.0-1.3
[   38s] [48/99] cumulate gcc-c++-14.2.0-1.3
[   38s] [49/99] cumulate binutils-libs-2.43-1.18
[   38s] [50/99] cumulate coreutils-6.9-14.10
[   38s] [51/99] cumulate gawk-3.1.5-1.3
[   38s] [52/99] cumulate grep-2.5.2-1.17
[   38s] [53/99] cumulate libacl-2.3.2-1.20
[   38s] [54/99] cumulate libcc1-14.2.0-1.3
[   38s] [55/99] cumulate libelf-0.189-1.29
[   38s] [56/99] cumulate libmount-2.39.3-1.16
[   38s] [57/99] cumulate libubsan-14.2.0-1.3
[   38s] [58/99] cumulate make-4.4-1.18
[   38s] [59/99] cumulate nss-certs-3.98-1.28
[   38s] [60/99] cumulate smack-1.3.1-1.18
[   38s] [61/99] cumulate bzip2-1.0.8-1.21
[   38s] [62/99] cumulate libfdisk-2.39.3-1.16
[   38s] [63/99] cumulate libmagic-5.45-1.19
[   38s] [64/99] cumulate libxml2-2.12.5-1.23
[   38s] [65/99] cumulate xz-5.4.5-1.29
[   38s] [66/99] cumulate perl-5.38.0-1.21
[   38s] [67/99] cumulate build-mkbaselibs-20120927-1.1
[   38s] [68/99] cumulate linux-glibc-devel-6.6-1.28
[   38s] [69/99] cumulate terminfo-base-full-6.4-1.29
[   38s] [70/99] cumulate autoconf-2.71-1.29
[   38s] [71/99] cumulate file-5.45-1.19
[   38s] [72/99] cumulate glibc-locale-2.40-1.1
[   38s] [73/99] cumulate perl-DBI-1.628-1.3
[   38s] [74/99] cumulate tar-1.17-1.3
[   38s] [75/99] cumulate binutils-2.43-1.18
[   38s] [76/99] cumulate gzip-1.3.12-1.18
[   38s] [77/99] cumulate pam-1.1.6-1.17
[   38s] [78/99] cumulate tzdata-2023c-1.3
[   38s] [79/99] cumulate libdw-0.189-1.29
[   38s] [80/99] cumulate libarchive-3.7.2-1.27
[   38s] [81/99] cumulate gcc-14.2.0-1.3
[   38s] [82/99] cumulate qemu-accel-x86_64-armv7l-0.4-3.12
[   38s] [83/99] cumulate automake-1.16.5-1.29
[   38s] [84/99] cumulate libasm-0.189-1.29
[   38s] [85/99] cumulate libncurses6-6.4-1.29
[   38s] [86/99] cumulate build-20120927-1.1
[   38s] [87/99] cumulate libncurses-6.4-1.29
[   38s] [88/99] cumulate less-643-1.3
[   38s] [89/99] cumulate libreadline-5.2-1.20
[   38s] [90/99] cumulate libtool-2.4.7-1.28
[   38s] [91/99] cumulate elfutils-0.189-1.29
[   38s] [92/99] cumulate util-linux-2.39.3-1.16
[   38s] [93/99] cumulate util-linux-su-2.39.3-1.16
[   38s] [94/99] cumulate libxcrypt-devel-4.4.36-1.26
[   38s] [95/99] cumulate nss-3.98-1.28
[   38s] [96/99] cumulate glibc-devel-2.40-1.1
[   38s] [97/99] cumulate libsoftokn3-3.98-1.28
[   38s] [98/99] cumulate rpm-4.14.1.1-3.16
[   38s] [99/99] cumulate rpm-build-4.14.1.1-3.16
[   38s] now installing cumulated packages
[   39s] Preparing...                          ########################################
[   39s] Updating / installing...
[   39s] setup-0.9-1.12                        ##############warning: /etc/profile created as /etc/profile.rpmnew
[   39s] ##########################
[   39s] filesystem-3.1-1.1                    ########################################
[   40s] libmagic-data-5.45-1.19               ########################################
[   40s] glibc-2.40-1.1                        warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig
[   40s] ########################################
[   41s] libgcc-14.2.0-1.3                     ########################################
[   41s] bash-3.2.57-1.3                       ########################################
[   41s] zlib-1.3-1.26                         ########################################
[   42s] coreutils-6.9-14.10                   ########################################
[   42s] libstdc++-14.2.0-1.3                  ########################################
[   43s] libbz2-1.0.8-1.21                     ########################################
[   43s] liblzma-5.4.5-1.29                    ########################################
[   43s] libelf-0.189-1.29                     ########################################
[   43s] libdw-0.189-1.29                      ########################################
[   44s] libxcrypt-4.4.36-1.26                 ########################################
[   44s] libmagic-5.45-1.19                    ########################################
[   44s] libblkid-2.39.3-1.16                  ########################################
[   44s] nspr-4.35-1.18                        ########################################
[   45s] pam-1.1.6-1.17                        ########################################
[   45s] libcap-2.69-1.19                      ########################################
[   45s] libfreebl3-3.98-1.28                  ########################################
[   46s] liblua-5.1.5-1.18                     ########################################
[   46s] libpopt-1.16-1.18                     ########################################
[   46s] libuuid-2.39.3-1.16                   ########################################
[   47s] libzstd1-1.5.5-1.20                   ########################################
[   48s] linux-glibc-devel-6.6-1.28            ########################################
[   48s] terminfo-base-full-6.4-1.29           ########################################
[   48s] libncurses6-6.4-1.29                  ########################################
[   48s] libreadline-5.2-1.20                  ########################################
[   48s] libfdisk-2.39.3-1.16                  ########################################
[   49s] nss-certs-3.98-1.28                   ########################################
[   49s] libmount-2.39.3-1.16                  ########################################
[   49s] libasm-0.189-1.29                     ########################################
[   49s] libxml2-2.12.5-1.23                   ########################################
[   50s] xz-5.4.5-1.29                         ########################################
[   50s] bzip2-1.0.8-1.21                      ########################################
[   50s] libcc1-14.2.0-1.3                     ########################################
[   50s] libubsan-14.2.0-1.3                   ########################################
[   50s] gzip-1.3.12-1.18                      ########################################
[   51s] binutils-libs-2.43-1.18               ########################################
[   51s] binutils-2.43-1.18                    ########################################
[   52s] make-4.4-1.18                         ########################################
[   52s] findutils-4.3.8-1.19                  ########################################
[   52s] gdbm-1.8.3-1.29                       ########################################
[   57s] perl-5.38.0-1.21                      ########################################
[   57s] build-mkbaselibs-20120927-1.1         ########################################
[   57s] libattr-2.5.1-1.19                    ########################################
[   57s] libacl-2.3.2-1.20                     ########################################
[   57s] tar-1.17-1.3                          ########################################
[   57s] libgfortran-14.2.0-1.3                ########################################
[   58s] libgomp-14.2.0-1.3                    ########################################
[   58s] libitm-14.2.0-1.3                     ########################################
[   58s] libltdl-2.4.7-1.28                    ########################################
[   59s] libopenssl3-3.0.13-1.29               ########################################
[   59s] libarchive-3.7.2-1.27                 ########################################
[   60s] libpcre-8.45-1.18                     ########################################
[   60s] libsmack-1.3.1-1.18                   ########################################
[   60s] libsmartcols-2.39.3-1.16              ########################################
[   60s] libsqlite-3.44.0-1.18                 ########################################
[   61s] libsoftokn3-3.98-1.28                 ########################################
[   61s] nss-3.98-1.28                         ########################################
[   63s] rpm-4.14.1.1-3.16                     ########################################
[   63s] m4-1.4.19-1.3                         ########################################
[   63s] autoconf-2.71-1.29                    ########################################
[   64s] automake-1.16.5-1.29                  ########################################
[   64s] patch-2.7.6-1.18                      ########################################
[   64s] pkg-config-0.29.2-1.21                ########################################
[   64s] sed-4.1c-1.18                         ########################################
[   65s] util-linux-2.39.3-1.16                ########################################
[   65s] libatomic-14.2.0-1.3                  ########################################
[   66s] libtool-2.4.7-1.28                    ########################################
[   66s] build-20120927-1.1                    ########################################
[   66s] libncurses-6.4-1.29                   ########################################
[   68s] libstdc++-devel-14.2.0-1.3            ########################################
[   68s] build-compare-2023.06.18-1.12         ########################################
[   68s] hal-rootstrap-checker-0.1.0-1.1       ########################################
[   76s] qemu-linux-user-x86_64-cross-5.2.0.2-2########################################
[   82s] gcc-14.2.0-1.3                        ########################################
[   82s] libxcrypt-devel-4.4.36-1.26           ########################################
[   82s] glibc-devel-2.40-1.1                  ########################################
[  106s] qemu-accel-x86_64-armv7l-0.4-3.12     ########################################
[  107s] rpm-build-4.14.1.1-3.16               ########################################
[  107s] util-linux-su-2.39.3-1.16             ########################################
[  107s] smack-1.3.1-1.18                      ########################################
[  107s] grep-2.5.2-1.17                       ########################################
[  107s] perl-DBI-1.628-1.3                    ########################################
[  107s] elfutils-0.189-1.29                   ########################################
[  107s] less-643-1.3                          ########################################
[  107s] file-5.45-1.19                        ########################################
[  108s] glibc-locale-2.40-1.1                 ########################################
[  108s] tzdata-2023c-1.3                      ########################################
[  110s] cpp-14.2.0-1.3                        ########################################
[  112s] gcc-c++-14.2.0-1.3                    ########################################
[  112s] gawk-3.1.5-1.3                        ########################################
[  112s] cpio-2.8-1.4                          ########################################
[  112s] diffutils-3.10-1.3                    ########################################
[  112s] hostname-3.23-1.4                     ########################################
[  112s] net-tools-2.0_20121208git-1.18        ########################################
[  112s] update-alternatives-1.22.2-1.3        ########################################
[  112s] which-2.17-1.4                        ########################################
[  114s] now finalizing build dir...
[  115s] -----------------------------------------------------------------
[  115s] I have the following modifications for perl-DBD-SQLite.spec:
[  115s] 22c22
[  115s] < Release:        0
[  115s] ---
[  115s] > Release:        1.3
[  115s] build target is armv7l-tizen-linux
[  115s] -----------------------------------------------------------------
[  115s] ----- building perl-DBD-SQLite.spec (user abuild)
[  115s] -----------------------------------------------------------------
[  115s] -----------------------------------------------------------------
[  116s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/4fb418fbb3d4945c6ef63c7af57f58a8-perl-DBD-SQLite' /home/abuild/rpmbuild/SOURCES/perl-DBD-SQLite.spec
[  118s] Building target platforms: armv7l-tizen-linux
[  118s] Building for target armv7l-tizen-linux
[  118s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.38CYO3
[  118s] + umask 022
[  118s] + cd /home/abuild/rpmbuild/BUILD
[  118s] + cd /home/abuild/rpmbuild/BUILD
[  118s] + rm -rf DBD-SQLite-1.50
[  118s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/DBD-SQLite-1.50.tar.gz
[  118s] + /bin/tar -xof -
[  118s] + STATUS=0
[  118s] + '[' 0 -ne 0 ']'
[  118s] + cd DBD-SQLite-1.50
[  118s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[  118s] + echo 'Patch #0 (0001-SQLite-fix-error-by-Wimplicit-function-declaration.patch):'
[  118s] Patch #0 (0001-SQLite-fix-error-by-Wimplicit-function-declaration.patch):
[  118s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2
[  118s] patching file SQLite.xs
[  118s] + find . -type f '!' -name '*.pl' -print0
[  118s] + xargs -0 chmod 644
[  119s] + exit 0
[  119s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Ns6WS9
[  119s] + umask 022
[  119s] + cd /home/abuild/rpmbuild/BUILD
[  119s] + cd DBD-SQLite-1.50
[  119s] + ref=/usr/lib/rpm
[  119s] + mints=0
[  119s] + case $(uname -m) in
[  119s] ++ uname -m
[  119s] + for s in guess sub
[  119s] ++ find -maxdepth 8 -name config.guess
[  119s] + for s in guess sub
[  119s] ++ find -maxdepth 8 -name config.sub
[  119s] + LANG=C
[  119s] + export LANG
[  119s] + unset DISPLAY
[  119s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g'
[  119s] + export CFLAGS
[  119s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g'
[  119s] + export CXXFLAGS
[  119s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir'
[  119s] + export FFLAGS
[  119s] + LDFLAGS=
[  119s] + export LDFLAGS
[  119s] + /bin/perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g'
[  121s] Checking if your kit is complete...
[  121s] Looks good
[  122s] Using DBI 1.628 (for perl 5.038000 on armv7l-linux-thread-multi) installed in /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBI/
[  122s] Generating a Unix-style Makefile
[  122s] Writing Makefile for DBD::SQLite
[  122s] Writing MYMETA.yml and MYMETA.json
[  122s] + /bin/make -j12
[  122s] "/usr/bin/perl" -p -e "s/~DRIVER~/SQLite/g" /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBI/Driver.xst > SQLite.xsi
[  122s] Running Mkbootstrap for SQLite ()
[  122s] cc -c  -I. -I/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g   -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE"  -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 dbdimp.c
[  122s] In file included from SQLiteXS.h:11,
[  122s]                  from dbdimp.c:6:
[  122s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined
[  122s]  1059 | #define PERL_USE_SAFE_PUTENV
[  122s]       |         ^~~~~~~~~~~~~~~~~~~~
[  122s] <command-line>: note: this is the location of the previous definition
[  122s] cc -c  -I. -I/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g   -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE"  -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 sqlite3.c
[  123s] "/usr/bin/perl" "/usr/lib/perl5/5.38.0/ExtUtils/xsubpp"  -typemap '/usr/lib/perl5/5.38.0/ExtUtils/typemap' -typemap '/home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/typemap'  SQLite.xs > SQLite.xsc
[  123s] chmod 644 "SQLite.bs"
[  123s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644
[  123s] cp lib/DBD/SQLite/VirtualTable/FileContent.pm blib/lib/DBD/SQLite/VirtualTable/FileContent.pm
[  123s] cp lib/DBD/SQLite/Constants.pm blib/lib/DBD/SQLite/Constants.pm
[  123s] cp lib/DBD/SQLite.pm blib/lib/DBD/SQLite.pm
[  123s] cp lib/DBD/SQLite/Cookbook.pod blib/lib/DBD/SQLite/Cookbook.pod
[  123s] cp lib/DBD/SQLite/Fulltext_search.pod blib/lib/DBD/SQLite/Fulltext_search.pod
[  123s] cp lib/DBD/SQLite/VirtualTable/PerlData.pm blib/lib/DBD/SQLite/VirtualTable/PerlData.pm
[  123s] cp lib/DBD/SQLite/VirtualTable.pm blib/lib/DBD/SQLite/VirtualTable.pm
[  123s] dbdimp.c: In function 'sqlite_db_do_sv':
[  123s] dbdimp.c:485:9: warning: unused variable 'i' [-Wunused-variable]
[  123s]   485 |     int i;
[  123s]       |         ^
[  123s] dbdimp.c: In function 'sqlite_db_disconnect':
[  123s] dbdimp.c:636:17: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
[  123s]   636 |         while ( s = imp_dbh->stmt_list ) {
[  123s]       |                 ^
[  123s] dbdimp.c:651:12: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
[  123s]   651 |     while( s = imp_dbh->stmt_list ) {
[  123s]       |            ^
[  123s] dbdimp.c: In function 'sqlite_st_prepare_sv':
[  123s] dbdimp.c:865:9: warning: the address of 'extra' will always evaluate as 'true' [-Waddress]
[  123s]   865 |     if (&extra && imp_dbh->allow_multiple_statements) {
[  123s]       |         ^
[  123s] In file included from /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:6168:
[  123s] dbdimp.c: In function 'sqlite_db_func_dispatcher':
[  123s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  123s]   162 | #define POPs            (*sp--)
[  123s]       |                         ~^~~~~~
[  123s] dbdimp.c:1635:9: note: in expansion of macro 'POPs'
[  123s]  1635 |         POPs;
[  123s]       |         ^~~~
[  123s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  123s]   162 | #define POPs            (*sp--)
[  123s]       |                         ~^~~~~~
[  123s] dbdimp.c:1643:13: note: in expansion of macro 'POPs'
[  123s]  1643 |             POPs;
[  123s]       |             ^~~~
[  123s] dbdimp.c: In function 'sqlite_db_aggr_new_dispatcher':
[  123s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  123s]   162 | #define POPs            (*sp--)
[  123s]       |                         ~^~~~~~
[  123s] dbdimp.c:1820:9: note: in expansion of macro 'POPs'
[  123s]  1820 |         POPs;
[  123s]       |         ^~~~
[  123s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  123s]   162 | #define POPs            (*sp--)
[  123s]       |                         ~^~~~~~
[  123s] dbdimp.c:1828:13: note: in expansion of macro 'POPs'
[  123s]  1828 |             POPs;
[  123s]       |             ^~~~
[  123s] dbdimp.c: In function 'sqlite_db_aggr_step_dispatcher':
[  123s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  123s]   162 | #define POPs            (*sp--)
[  123s]       |                         ~^~~~~~
[  123s] dbdimp.c:1885:7: note: in expansion of macro 'POPs'
[  123s]  1885 |       POPs;
[  123s]       |       ^~~~
[  123s] dbdimp.c: In function 'sqlite_db_aggr_finalize_dispatcher':
[  123s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  123s]   162 | #define POPs            (*sp--)
[  123s]       |                         ~^~~~~~
[  123s] dbdimp.c:1926:13: note: in expansion of macro 'POPs'
[  123s]  1926 |             POPs;
[  123s]       |             ^~~~
[  123s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  123s]   162 | #define POPs            (*sp--)
[  123s]       |                         ~^~~~~~
[  123s] dbdimp.c:1933:17: note: in expansion of macro 'POPs'
[  123s]  1933 |                 POPs;
[  123s]       |                 ^~~~
[  123s] dbdimp.c: In function 'sqlite_db_trace_dispatcher':
[  123s] dbdimp.c:2413:9: warning: variable 'retval' set but not used [-Wunused-but-set-variable]
[  123s]  2413 |     int retval = 0;
[  123s]       |         ^~~~~~
[  123s] dbdimp.c: In function 'sqlite_db_profile_dispatcher':
[  123s] dbdimp.c:2471:9: warning: variable 'retval' set but not used [-Wunused-but-set-variable]
[  123s]  2471 |     int retval = 0;
[  123s]       |         ^~~~~~
[  123s] dbdimp.c: In function 'perl_tokenizer_Next':
[  123s] dbdimp.c:2803:12: warning: unused variable 'n_a' [-Wunused-variable]
[  123s]  2803 |     STRLEN n_a; /* this is required for older perls < 5.8.8 */
[  123s]       |            ^~~
[  124s] dbdimp.c: In function 'sqlite_db_destroy_module_data':
[  124s] dbdimp.c:3664:9: warning: unused variable 'rc' [-Wunused-variable]
[  124s]  3664 |     int rc = SQLITE_ERROR;
[  124s]       |         ^~
[  124s] In file included from SQLiteXS.h:17:
[  124s] dbdimp.h: At top level:
[  124s] dbdimp.h:149:1: warning: 'newUTF8SVpvn' defined but not used [-Wunused-function]
[  124s]   149 | newUTF8SVpvn(char *s, STRLEN len) {
[  124s]       | ^~~~~~~~~~~~
[  124s] dbdimp.h:139:1: warning: 'newUTF8SVpv' defined but not used [-Wunused-function]
[  124s]   139 | newUTF8SVpv(char *s, STRLEN len) {
[  124s]       | ^~~~~~~~~~~
[  124s] dbdimp.c: In function 'perl_vt_Eof':
[  124s] dbdimp.c:3378:12: warning: 'eof' may be used uninitialized [-Wmaybe-uninitialized]
[  124s]  3378 |     return eof;
[  124s]       |            ^~~
[  124s] dbdimp.c:3354:16: note: 'eof' was declared here
[  124s]  3354 |     int count, eof;
[  124s]       |                ^~~
[  125s] mv SQLite.xsc SQLite.c
[  125s] cc -c  -I. -I/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g   -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE"  -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 SQLite.c
[  125s] In file included from SQLiteXS.h:11,
[  125s]                  from SQLite.xs:3:
[  125s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined
[  125s]  1059 | #define PERL_USE_SAFE_PUTENV
[  125s]       |         ^~~~~~~~~~~~~~~~~~~~
[  125s] <command-line>: note: this is the location of the previous definition
[  126s] In file included from SQLiteXS.h:12:
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_last_insert_rowid':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:198:5: note: in expansion of macro 'dXSI32'
[  126s]   198 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_create_function':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:223:5: note: in expansion of macro 'dXSI32'
[  126s]   223 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_enable_load_extension':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:264:5: note: in expansion of macro 'dXSI32'
[  126s]   264 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_load_extension':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:290:5: note: in expansion of macro 'dXSI32'
[  126s]   290 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_create_aggregate':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:325:5: note: in expansion of macro 'dXSI32'
[  126s]   325 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_create_collation':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:363:5: note: in expansion of macro 'dXSI32'
[  126s]   363 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_collation_needed':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:391:5: note: in expansion of macro 'dXSI32'
[  126s]   391 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_progress_handler':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:413:5: note: in expansion of macro 'dXSI32'
[  126s]   413 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_profile':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:466:5: note: in expansion of macro 'dXSI32'
[  126s]   466 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_commit_hook':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:492:5: note: in expansion of macro 'dXSI32'
[  126s]   492 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_rollback_hook':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:517:5: note: in expansion of macro 'dXSI32'
[  126s]   517 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_update_hook':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:542:5: note: in expansion of macro 'dXSI32'
[  126s]   542 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_set_authorizer':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:567:5: note: in expansion of macro 'dXSI32'
[  126s]   567 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_busy_timeout':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:593:5: note: in expansion of macro 'dXSI32'
[  126s]   593 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_backup_from_file':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:623:5: note: in expansion of macro 'dXSI32'
[  126s]   623 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_backup_to_file':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:647:5: note: in expansion of macro 'dXSI32'
[  126s]   647 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_table_column_metadata':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:671:5: note: in expansion of macro 'dXSI32'
[  126s]   671 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_db_filename':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:702:5: note: in expansion of macro 'dXSI32'
[  126s]   702 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_register_fts3_perl_tokenizer':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:723:5: note: in expansion of macro 'dXSI32'
[  126s]   723 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_db_status':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:745:5: note: in expansion of macro 'dXSI32'
[  126s]   745 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__db_create_module':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:778:5: note: in expansion of macro 'dXSI32'
[  126s]   778 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite__st_st_status':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  126s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  126s]       |                    ^~
[  126s] SQLite.c:806:5: note: in expansion of macro 'dXSI32'
[  126s]   806 |     dXSI32;
[  126s]       |     ^~~~~~
[  126s] SQLite.c: In function 'XS_DBD__SQLite_compile_options':
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/XSUB.h:189:28: warning: unused variable 'targ' [-Wunused-variable]
[  126s]   189 | #define dXSTARG SV * const targ = ((PL_op->op_private & OPpENTERSUB_HASTARG) \
[  126s]       |                            ^~~~
[  126s] SQLite.c:843:9: note: in expansion of macro 'dXSTARG'
[  126s]   843 |         dXSTARG;
[  126s]       |         ^~~~~~~
[  126s] SQLite.c:842:17: warning: unused variable 'RETVAL' [-Wunused-variable]
[  126s]   842 |         int     RETVAL;
[  126s]       |                 ^~~~~~
[  126s] ./SQLite.xsi: In function 'XS_DBD__SQLite__db_selectrow_arrayref':
[  126s] ./SQLite.xsi:208:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations]
[  126s]   208 |         if (GIMME == G_SCALAR)
[  126s]       |         ^~
[  126s] In file included from /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:6188:
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/proto.h:1019:1: note: declared here
[  126s]  1019 | Perl_dowantarray(pTHX)
[  126s]       | ^~~~~~~~~~~~~~~~
[  126s] ./SQLite.xsi:214:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations]
[  126s]   214 |         if (GIMME == G_SCALAR)
[  126s]       |         ^~
[  126s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/proto.h:1019:1: note: declared here
[  126s]  1019 | Perl_dowantarray(pTHX)
[  126s]       | ^~~~~~~~~~~~~~~~
[  126s] In file included from SQLiteXS.h:17:
[  126s] dbdimp.h: At top level:
[  126s] dbdimp.h:149:1: warning: 'newUTF8SVpvn' defined but not used [-Wunused-function]
[  126s]   149 | newUTF8SVpvn(char *s, STRLEN len) {
[  126s]       | ^~~~~~~~~~~~
[  126s] dbdimp.h:139:1: warning: 'newUTF8SVpv' defined but not used [-Wunused-function]
[  126s]   139 | newUTF8SVpv(char *s, STRLEN len) {
[  126s]       | ^~~~~~~~~~~
[  128s] sqlite3.c: In function 'sqlite3DefaultRowEst':
[  128s] sqlite3.c:97173:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
[  128s] 97173 |   if( a[0]<33 ) a[0] = 33;        assert( 33==sqlite3LogEst(10) );
[  128s]       |   ^~
[  128s] In file included from sqlite3.c:9670:
[  128s] sqlite3.c:97173:35: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if'
[  128s] 97173 |   if( a[0]<33 ) a[0] = 33;        assert( 33==sqlite3LogEst(10) );
[  128s]       |                                   ^~~~~~
[  134s] sqlite3.c: In function 'whereRangeScanEst':
[  134s] sqlite3.c:124048:11: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
[  134s] 124048 |           if( iLwrIdx==iUprIdx ) nNew -= 20;  assert( 20==sqlite3LogEst(4) );
[  134s]        |           ^~
[  134s] sqlite3.c:124048:47: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if'
[  134s] 124048 |           if( iLwrIdx==iUprIdx ) nNew -= 20;  assert( 20==sqlite3LogEst(4) );
[  134s]        |                                               ^~~~~~
[  158s] sqlite3.c: In function 'sqlite3SelectNew':
[  158s] sqlite3.c:109810:10: warning: function may return address of local variable [-Wreturn-local-addr]
[  158s] 109810 |   return pNew;
[  158s]        |          ^~~~
[  158s] sqlite3.c:109778:10: note: declared here
[  158s] 109778 |   Select standin;
[  158s]        |          ^~~~~~~
[  194s] rm -f blib/arch/auto/DBD/SQLite/SQLite.so
[  194s] cc  -shared -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -Wall -pipe -L/usr/local/lib -Wl,-Bsymbolic  SQLite.o dbdimp.o sqlite3.o  -o blib/arch/auto/DBD/SQLite/SQLite.so  \
[  194s]       \
[  194s]   
[  195s] chmod 755 blib/arch/auto/DBD/SQLite/SQLite.so
[  198s] Manifying 7 pod documents
[  198s] + exit 0
[  198s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.mrUrOV
[  198s] + umask 022
[  198s] + cd /home/abuild/rpmbuild/BUILD
[  198s] + cd DBD-SQLite-1.50
[  198s] + LANG=C
[  198s] + export LANG
[  198s] + unset DISPLAY
[  198s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm
[  198s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm
[  198s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm install_vendor
[  199s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644
[  200s] Manifying 7 pod documents
[  201s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite.pm
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/Constants.pm
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/man/man3/DBD::SQLite::VirtualTable.3
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/man/man3/DBD::SQLite::VirtualTable::PerlData.3
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/man/man3/DBD::SQLite.3
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/man/man3/DBD::SQLite::Fulltext_search.3
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/man/man3/DBD::SQLite::VirtualTable::FileContent.3
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/man/man3/DBD::SQLite::Constants.3
[  201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/man/man3/DBD::SQLite::Cookbook.3
[  201s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod
[  202s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto
[  202s] + xargs -0 -r rm
[  202s] + find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto -name .packlist -print0
[  202s] + '[' armv7l == noarch ']'
[  202s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod
[  202s] + FILES=perl-DBD-SQLite.files
[  202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f
[  202s] + RES=
[  202s] + '[' -n '' ']'
[  202s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/
[  202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ -type d
[  202s] ++ sort
[  202s] + for dir in '`find ${base_dir} -type d | sort`'
[  202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[  202s] + continue
[  202s] + for dir in '`find ${base_dir} -type d | sort`'
[  202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[  202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[  202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi
[  202s] + el=armv7l-linux-thread-multi
[  202s] + all_dir=(${all_dir[@]} $el)
[  202s] + for dir in '`find ${base_dir} -type d | sort`'
[  202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[  202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[  202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD
[  202s] + el=armv7l-linux-thread-multi/DBD
[  202s] + all_dir=(${all_dir[@]} $el)
[  202s] + for dir in '`find ${base_dir} -type d | sort`'
[  202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[  202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[  202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite
[  202s] + el=armv7l-linux-thread-multi/DBD/SQLite
[  202s] + all_dir=(${all_dir[@]} $el)
[  202s] + for dir in '`find ${base_dir} -type d | sort`'
[  202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[  203s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[  203s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable
[  203s] + el=armv7l-linux-thread-multi/DBD/SQLite/VirtualTable
[  203s] + all_dir=(${all_dir[@]} $el)
[  203s] + for dir in '`find ${base_dir} -type d | sort`'
[  203s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[  203s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[  203s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto
[  203s] + el=armv7l-linux-thread-multi/auto
[  203s] + all_dir=(${all_dir[@]} $el)
[  203s] + for dir in '`find ${base_dir} -type d | sort`'
[  203s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[  203s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[  203s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD
[  203s] + el=armv7l-linux-thread-multi/auto/DBD
[  203s] + all_dir=(${all_dir[@]} $el)
[  203s] + for dir in '`find ${base_dir} -type d | sort`'
[  203s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[  203s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[  203s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite
[  203s] + el=armv7l-linux-thread-multi/auto/DBD/SQLite
[  203s] + all_dir=(${all_dir[@]} $el)
[  203s] + for dir in '`find ${base_dir} -type d | sort`'
[  203s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[  203s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[  203s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share
[  203s] + el=armv7l-linux-thread-multi/auto/share
[  203s] + all_dir=(${all_dir[@]} $el)
[  203s] + for dir in '`find ${base_dir} -type d | sort`'
[  203s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[  203s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist
[  203s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[  203s] + el=armv7l-linux-thread-multi/auto/share/dist
[  203s] + all_dir=(${all_dir[@]} $el)
[  203s] + for dir in '`find ${base_dir} -type d | sort`'
[  203s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[  203s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite
[  203s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[  203s] + el=armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite
[  203s] + all_dir=(${all_dir[@]} $el)
[  203s] + for i in '${all_dir[@]}'
[  203s] + '[' armv7l-linux-thread-multi = auto ']'
[  203s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']'
[  203s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi ']'
[  203s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi -maxdepth 1 -type f
[  203s] + RES=
[  203s] + '[' -n '' ']'
[  203s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi
[  203s] + /bin/cat
[  203s] + for i in '${all_dir[@]}'
[  203s] + '[' armv7l-linux-thread-multi/DBD = auto ']'
[  203s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']'
[  203s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD ']'
[  203s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD -maxdepth 1 -type f
[  203s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite.pm
[  203s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite.pm ']'
[  203s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD
[  203s] + /bin/cat
[  203s] + for file in '$RES'
[  203s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite.pm
[  203s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite.pm
[  203s] + /bin/cat
[  203s] + for i in '${all_dir[@]}'
[  203s] + '[' armv7l-linux-thread-multi/DBD/SQLite = auto ']'
[  203s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']'
[  203s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite ']'
[  203s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite -maxdepth 1 -type f
[  203s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  203s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Constants.pm
[  203s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  203s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod'
[  203s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  203s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Constants.pm
[  203s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  203s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod' ']'
[  203s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite
[  203s] + /bin/cat
[  203s] + for file in '$RES'
[  203s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  203s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  203s] + /bin/cat
[  203s] + for file in '$RES'
[  203s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Constants.pm
[  203s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/Constants.pm
[  203s] + /bin/cat
[  203s] + for file in '$RES'
[  203s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  203s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  203s] + /bin/cat
[  203s] + for file in '$RES'
[  203s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod
[  203s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod
[  203s] + /bin/cat
[  203s] + for i in '${all_dir[@]}'
[  203s] + '[' armv7l-linux-thread-multi/DBD/SQLite/VirtualTable = auto ']'
[  203s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']'
[  203s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable ']'
[  203s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable -maxdepth 1 -type f
[  203s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  203s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm'
[  203s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  203s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm' ']'
[  203s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable
[  203s] + /bin/cat
[  203s] + for file in '$RES'
[  203s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  203s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  203s] + /bin/cat
[  203s] + for file in '$RES'
[  203s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm
[  203s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm
[  203s] + /bin/cat
[  203s] + for i in '${all_dir[@]}'
[  203s] + '[' armv7l-linux-thread-multi/auto = auto ']'
[  203s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']'
[  203s] + continue
[  203s] + for i in '${all_dir[@]}'
[  203s] + '[' armv7l-linux-thread-multi/auto/DBD = auto ']'
[  203s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']'
[  203s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD ']'
[  203s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD -maxdepth 1 -type f
[  203s] + RES=
[  203s] + '[' -n '' ']'
[  203s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD
[  203s] + /bin/cat
[  203s] + for i in '${all_dir[@]}'
[  203s] + '[' armv7l-linux-thread-multi/auto/DBD/SQLite = auto ']'
[  203s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']'
[  203s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD/SQLite ']'
[  203s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD/SQLite -maxdepth 1 -type f
[  203s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  203s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so ']'
[  203s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite
[  203s] + /bin/cat
[  203s] + for file in '$RES'
[  203s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  204s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  204s] + /bin/cat
[  204s] + for i in '${all_dir[@]}'
[  204s] + '[' armv7l-linux-thread-multi/auto/share = auto ']'
[  204s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']'
[  204s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share ']'
[  204s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share -maxdepth 1 -type f
[  204s] + RES=
[  204s] + '[' -n '' ']'
[  204s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share
[  204s] + /bin/cat
[  204s] + for i in '${all_dir[@]}'
[  204s] + '[' armv7l-linux-thread-multi/auto/share/dist = auto ']'
[  204s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']'
[  204s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist ']'
[  204s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist -maxdepth 1 -type f
[  204s] + RES=
[  204s] + '[' -n '' ']'
[  204s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist
[  204s] + /bin/cat
[  204s] + for i in '${all_dir[@]}'
[  204s] + '[' armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite = auto ']'
[  204s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']'
[  204s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite ']'
[  204s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite -maxdepth 1 -type f
[  204s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  204s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  204s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h'
[  204s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  204s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  204s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h' ']'
[  204s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite
[  204s] + /bin/cat
[  204s] + for file in '$RES'
[  204s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  204s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  204s] + /bin/cat
[  204s] + for file in '$RES'
[  204s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  204s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  204s] + /bin/cat
[  204s] + for file in '$RES'
[  204s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h
[  204s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h
[  204s] + /bin/cat
[  204s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/man ']'
[  204s] + fgen_file '/usr/share/man/man?/*'
[  204s] + /bin/cat
[  204s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/var/adm/perl-modules/perl-DBD-SQLite ']'
[  204s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/bin ']'
[  204s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.50-1.3 --unique-debug-src-base perl-DBD-SQLite-1.50-1.3.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50
[  205s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  205s] 14208 blocks
[  206s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/perl-DBD-SQLite-debuginfo.manifest
[  206s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/perl-DBD-SQLite-debugsource.manifest
[  206s] + /usr/lib/rpm/check-buildroot
[  206s] + /usr/lib/rpm//brp-compress
[  206s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip
[  207s] + /usr/lib/rpm/brp-python-hardlink
[  207s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm
[  207s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/isu.list
[  207s] ~/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm ~/rpmbuild/BUILD/DBD-SQLite-1.50
[  207s] ~/rpmbuild/BUILD/DBD-SQLite-1.50
[  207s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES
[  219s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.RrBTcg
[  219s] + umask 022
[  219s] + cd /home/abuild/rpmbuild/BUILD
[  219s] + cd DBD-SQLite-1.50
[  219s] + /bin/make test
[  220s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644
[  220s] PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/**/*.t
[  224s] # $DBI::VERSION=1.628
[  224s] # Compile Options:
[  224s] #   ENABLE_COLUMN_METADATA
[  224s] #   ENABLE_FTS3
[  224s] #   ENABLE_FTS3_PARENTHESIS
[  224s] #   ENABLE_FTS4
[  224s] #   ENABLE_JSON1
[  224s] #   ENABLE_RTREE
[  224s] #   ENABLE_STAT4
[  224s] #   SYSTEM_MALLOC
[  224s] #   THREADSAFE=1
[  224s] t/01_compile.t ........................................ ok
[  225s] # sqlite_version=3.10.2
[  225s] t/02_logon.t .......................................... ok
[  226s] t/03_create_table.t ................................... ok
[  227s] t/04_insert.t ......................................... ok
[  229s] t/05_select.t ......................................... ok
[  231s] t/06_tran.t ........................................... ok
[  232s] t/07_error.t .......................................... ok
[  240s] t/08_busy.t ........................................... ok
[  241s] t/09_create_function.t ................................ ok
[  243s] t/10_create_aggregate.t ............................... ok
[  246s] t/12_unicode.t ........................................ ok
[  247s] t/13_create_collation.t ............................... ok
[  249s] t/14_progress_handler.t ............................... ok
[  251s] t/15_ak_dbd.t ......................................... ok
[  252s] t/16_column_info.t .................................... ok
[  254s] t/17_createdrop.t ..................................... ok
[  255s] t/18_insertfetch.t .................................... ok
[  257s] t/19_bindparam.t ...................................... ok
[  259s] t/20_blobs.t .......................................... ok
[  260s] t/21_blobtext.t ....................................... ok
[  261s] t/22_listfields.t ..................................... ok
[  262s] t/23_nulls.t .......................................... ok
[  264s] t/24_numrows.t ........................................ ok
[  265s] t/25_chopblanks.t ..................................... ok
[  267s] t/26_commit.t ......................................... ok
[  269s] t/27_metadata.t ....................................... ok
[  273s] t/28_schemachange.t ................................... ok
[  274s] t/30_auto_rollback.t .................................. ok
[  275s] t/31_bind_weird_number_param.t ........................ ok
[  276s] t/32_inactive_error.t ................................. ok
[  278s] t/33_non_latin_path.t ................................. ok
[  280s] t/34_online_backup.t .................................. ok
[  283s] t/35_table_info.t ..................................... ok
[  284s] t/36_hooks.t .......................................... ok
[  286s] t/37_regexp.t ......................................... ok
[  287s] t/38_empty_statement.t ................................ ok
[  289s] t/39_foreign_keys.t ................................... ok
[  291s] t/40_multiple_statements.t ............................ ok
[  292s] t/41_placeholders.t ................................... ok
[  294s] t/42_primary_key_info.t ............................... ok
[  295s] t/43_fts3.t ........................................... ok
[  297s] t/44_rtree.t .......................................... ok
[  299s] t/45_savepoints.t ..................................... ok
[  300s] t/46_mod_perl.t ....................................... skipped: requires APR::Table
[  302s] t/47_execute.t ........................................ ok
[  303s] t/48_bind_param_is_sticky.t ........................... ok
[  305s] t/49_trace_and_profile.t .............................. ok
[  307s] t/50_foreign_key_info.t ............................... ok
[  309s] t/51_table_column_metadata.t .......................... ok
[  310s] t/52_db_filename.t .................................... ok
[  313s] t/53_status.t ......................................... ok
[  314s] t/54_literal_txn.t .................................... ok
[  317s] t/55_statistics_info.t ................................ ok
[  319s] t/56_open_flags.t ..................................... ok
[  322s] t/57_uri_filename.t ................................... ok
[  323s] t/58_see_if_its_a_number_and_explicit_binding.t ....... ok
[  324s] t/59_extended_result_codes.t .......................... skipped: this test is for Win32 only
[  326s] t/60_readonly.t ....................................... ok
[  328s] t/61_strlike.t ........................................ ok
[  330s] t/cookbook_variance.t ................................. ok
[  332s] t/rt_106151_outermost_savepoint.t ..................... ok
[  333s] t/rt_106950_extra_warnings_with_savepoints.t .......... ok
[  335s] t/rt_15186_prepcached.t ............................... ok
[  337s] t/rt_21406_auto_finish.t .............................. ok
[  340s] t/rt_25371_asymmetric_unicode.t ....................... ok
[  342s] t/rt_25460_numeric_aggregate.t ........................ ok
[  344s] t/rt_25924_user_defined_func_unicode.t ................ ok
[  346s] t/rt_26775_distinct.t ................................. ok
[  348s] t/rt_27553_prepared_cache_and_analyze.t ............... ok
[  349s] t/rt_29058_group_by.t ................................. ok
[  352s] t/rt_29629_sqlite_where_length.t ...................... ok
[  353s] t/rt_31324_full_names.t ............................... ok
[  356s] t/rt_32889_prepare_cached_reexecute.t ................. ok
[  358s] t/rt_36836_duplicate_key.t ............................ ok
[  360s] t/rt_36838_unique_and_bus_error.t ..................... ok
[  362s] t/rt_40594_nullable.t ................................. ok
[  364s] t/rt_48393_debug_panic_with_commit.t .................. skipped: set $ENV{TEST_DBD_SQLITE_WITH_DEBUGGER} to enable this test
[  368s] t/rt_50503_fts3.t ..................................... ok
[  370s] t/rt_52573_manual_exclusive_lock.t .................... ok
[  372s] t/rt_53235_icu_compatibility.t ........................ skipped: requires SQLite ICU plugin to be enabled
[  375s] t/rt_62370_diconnected_handles_operation.t ............ ok
[  377s] t/rt_64177_ping_wipes_out_the_errstr.t ................ ok
[  380s] t/rt_67581_bind_params_mismatch.t ..................... ok
[  382s] t/rt_71311_bind_col_and_unicode.t ..................... ok
[  384s] t/rt_73159_fts_tokenizer_segfault.t ................... ok
[  386s] t/rt_73787_exponential_buffer_overflow.t .............. ok
[  391s] t/rt_76395_int_overflow.t ............................. ok
[  393s] t/rt_77724_primary_key_with_a_whitespace.t ............ ok
[  395s] t/rt_78833_utf8_flag_for_column_names.t ............... ok
[  397s] t/rt_81536_multi_column_primary_key_info.t ............ ok
[  400s] t/rt_88228_sqlite_3_8_0_crash.t ....................... ok
[  402s] t/rt_96050_db_filename_for_a_closed_database.t ........ ok
[  404s] t/rt_96877_unicode_statements.t ....................... ok
[  407s] t/rt_96878_fts_contentless_table.t .................... ok
[  409s] t/rt_97598_crash_on_disconnect_with_virtual_tables.t .. ok
[  412s] t/virtual_table/00_base.t ............................. ok
[  414s] t/virtual_table/01_destroy.t .......................... ok
[  416s] t/virtual_table/02_find_function.t .................... ok
[  419s] t/virtual_table/10_filecontent.t ...................... ok
[  422s] t/virtual_table/11_filecontent_fulltext.t ............. ok
[  425s] t/virtual_table/20_perldata.t ......................... ok
[  431s] t/virtual_table/21_perldata_charinfo.t ................ ok
[  433s] t/virtual_table/rt_99748.t ............................ ok
[  433s] All tests successful.
[  433s] Files=103, Tests=3561, 212 wallclock secs ( 3.27 usr  0.14 sys + 102.12 cusr  2.29 csys = 107.82 CPU)
[  433s] Result: PASS
[  433s] + exit 0
[  433s] Processing files: perl-DBD-SQLite-1.50-1.3.armv7l
[  433s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.1Zkd8R
[  433s] + umask 022
[  433s] + cd /home/abuild/rpmbuild/BUILD
[  433s] + cd DBD-SQLite-1.50
[  433s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/doc/packages/perl-DBD-SQLite
[  433s] + export LC_ALL=C
[  433s] + LC_ALL=C
[  433s] + export DOCDIR
[  433s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/doc/packages/perl-DBD-SQLite
[  433s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/doc/packages/perl-DBD-SQLite
[  433s] + cp -pr constants.inc /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/doc/packages/perl-DBD-SQLite
[  433s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/doc/packages/perl-DBD-SQLite
[  433s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm/usr/share/doc/packages/perl-DBD-SQLite
[  434s] + exit 0
[  436s] Provides: perl(DBD::SQLite) = 1.50 perl(DBD::SQLite::Constants) perl(DBD::SQLite::VirtualTable) = 1.50 perl(DBD::SQLite::VirtualTable::Cursor) perl(DBD::SQLite::VirtualTable::FileContent) perl(DBD::SQLite::VirtualTable::FileContent::Cursor) perl(DBD::SQLite::VirtualTable::PerlData) perl(DBD::SQLite::VirtualTable::PerlData::Cursor) perl-DBD-SQLite = 1.50-1.3 perl-DBD-SQLite(armv7l-32) = 1.50-1.3
[  436s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[  436s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.28) libc.so.6(GLIBC_2.33) libc.so.6(GLIBC_2.34) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH)
[  436s] Processing files: perl-DBD-SQLite-debugsource-1.50-1.3.armv7l
[  436s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[  436s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[  436s] 
[  436s] Provides: perl-DBD-SQLite-debugsource = 1.50-1.3 perl-DBD-SQLite-debugsource(armv7l-32) = 1.50-1.3
[  436s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[  436s] Processing files: perl-DBD-SQLite-debuginfo-1.50-1.3.armv7l
[  436s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[  436s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[  436s] 
[  436s] Provides: perl-DBD-SQLite-debuginfo = 1.50-1.3 perl-DBD-SQLite-debuginfo(armv7l-32) = 1.50-1.3
[  436s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[  436s] Recommends: perl-DBD-SQLite-debugsource(armv7l-32) = 1.50-1.3
[  436s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm
[  436s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-DBD-SQLite-1.50-1.3.src.rpm
[  446s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-DBD-SQLite-1.50-1.3.armv7l.rpm
[  458s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-DBD-SQLite-debugsource-1.50-1.3.armv7l.rpm
[  464s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-DBD-SQLite-debuginfo-1.50-1.3.armv7l.rpm
[  464s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ncc1CM
[  464s] + umask 022
[  464s] + cd /home/abuild/rpmbuild/BUILD
[  464s] + cd DBD-SQLite-1.50
[  464s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.3.arm
[  464s] + exit 0
[  465s] ... checking for files with abuild user/group
[  465s] ... creating baselibs
[  467s] ... comparing built packages with the former built
[  468s] /usr/lib/build/pkg-diff.sh
[  468s] compare /.build.oldpackages/perl-DBD-SQLite-1.50-1.2.src.rpm /home/abuild/rpmbuild/SRPMS/perl-DBD-SQLite-1.50-1.3.src.rpm
[  468s] This is not a prerelease project. Compare the project name.
[  469s] comparing disturl_distribution
[  469s] comparing the rpm tags of perl-DBD-SQLite
[  469s] --- old-rpm-tags
[  469s] +++ new-rpm-tags
[  469s] @@ -162 +162 @@
[  469s] -perl-DBD-SQLite.spec 6a088741df65b78883df2316f03be8de8aa42062cddcac94b9411c655e7cd11e 32
[  469s] +perl-DBD-SQLite.spec 0580acb37af9c0ac502639e35bede375fef3d575a71950cac8bdc3599876d2dd 32
[  469s] comparing rpmtags
[  469s] comparing RELEASE
[  469s] comparing PROVIDES
[  469s] comparing scripts
[  469s] comparing filelist
[  469s] comparing file checksum
[  470s] compare /.build.oldpackages/perl-DBD-SQLite-1.50-1.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-DBD-SQLite-1.50-1.3.armv7l.rpm
[  471s] Comparing perl-DBD-SQLite-1.50-1.2.armv7l.rpm to perl-DBD-SQLite-1.50-1.3.armv7l.rpm
[  472s] This is not a prerelease project. Compare the project name.
[  472s] comparing disturl_distribution
[  472s] comparing the rpm tags of perl-DBD-SQLite
[  472s] --- old-rpm-tags
[  472s] +++ new-rpm-tags
[  472s] @@ -221 +221 @@
[  472s] -/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so cb5a9769c0fceb8cab30c6beb6520ab2dc29f326edc2cf8761c3ad3c1d9050f9 0
[  472s] +/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so fbd9ca35854dccf563973d0ddfffc4ac461317354da0e6890dc3259e96b6c825 0
[  472s] @@ -245 +245 @@
[  472s] -perl-DBD-SQLite-1.50-1.2.src.rpm
[  472s] +perl-DBD-SQLite-1.50-1.3.src.rpm
[  472s] comparing rpmtags
[  472s] comparing RELEASE
[  472s] comparing PROVIDES
[  472s] comparing scripts
[  472s] comparing filelist
[  472s] comparing file checksum
[  472s] creating rename script
[  473s] RPM file checksum differs.
[  473s] Extracting packages
[  474s] /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so differs in ELF sections
[  474s] --- old /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so (objdump)
[  474s] +++ new /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so (objdump)
[  474s] @@ -36633,15 +36633,15 @@
[  474s]  Contents of section .fini:
[  474s]   8f1c8 08402de9 0880bde8                    .@-.....        
[  474s]  Contents of section .rodata:
[  474s] - 8f1d0 3e000000 41000000 0c000000 41000000  >...A.......A...
[  474s] - 8f1e0 11000000 41000000 27000000 41000000  ....A...'...A...
[  474s] - 8f1f0 36000000 41000000 03000000 41000000  6...A.......A...
[  474s] - 8f200 06000000 41000000 15000000 41000000  ....A.......A...
[  474s] - 8f210 0f000000 41000000 0e000000 41000000  ....A.......A...
[  474s] - 8f220 26000000 41000000 13000000 41000000  &...A.......A...
[  474s] - 8f230 29000000 41000000 02000000 41000000  )...A.......A...
[  474s] - 8f240 19000000 41000000 0a000000 41000000  ....A.......A...
[  474s] - 8f250 0b000000 41000000 00000000 00000000  ....A...........
[  474s] + 8f1d0 15000000 2e000000 1f000000 2e000000  ................
[  474s] + 8f1e0 31000000 2e000000 24000000 2e000000  1.......$.......
[  474s] + 8f1f0 29000000 2e000000 27000000 2e000000  ).......'.......
[  474s] + 8f200 05000000 2e000000 30000000 2e000000  ........0.......
[  474s] + 8f210 1e000000 2e000000 2f000000 2e000000  ......../.......
[  474s] + 8f220 2d000000 2e000000 04000000 2e000000  -...............
[  474s] + 8f230 1b000000 2e000000 28000000 2e000000  ........(.......
[  474s] + 8f240 06000000 2e000000 07000000 2e000000  ................
[  474s] + 8f250 0c000000 2e000000 00000000 00000000  ................
[  474s]   8f260 50617261 6d56616c 75657300 63616c6c  ParamValues.call
[  474s]   8f270 65642077 69746820 25642062 696e6420  ed with %d bind 
[  474s]   8f280 76617269 61626c65 73207768 656e2025  variables when %
[  474s] @@ -40476,16 +40476,16 @@
[  474s]   9e1d0 35000701 26010000 2e010000 61000300  5...&.......a...
[  474s]   9e1e0 22030100 03000100 17000100 35000001  "...........5...
[  474s]   9e1f0 03000000 34000100 22010100 255f0000  ....4..."...%_..
[  474s] - 9e200 00000000 332e3130 2e320000 3e000000  ....3.10.2..>...
[  474s] - 9e210 41000000 0c000000 41000000 11000000  A.......A.......
[  474s] - 9e220 41000000 27000000 41000000 36000000  A...'...A...6...
[  474s] - 9e230 41000000 03000000 41000000 06000000  A.......A.......
[  474s] - 9e240 41000000 15000000 41000000 0f000000  A.......A.......
[  474s] - 9e250 41000000 0e000000 41000000 26000000  A.......A...&...
[  474s] - 9e260 41000000 13000000 41000000 29000000  A.......A...)...
[  474s] - 9e270 41000000 02000000 41000000 19000000  A.......A.......
[  474s] - 9e280 41000000 0a000000 41000000 0b000000  A.......A.......
[  474s] - 9e290 41000000 00000000 00000000           A...........    
[  474s] + 9e200 00000000 332e3130 2e320000 15000000  ....3.10.2......
[  474s] + 9e210 2e000000 1f000000 2e000000 31000000  ............1...
[  474s] + 9e220 2e000000 24000000 2e000000 29000000  ....$.......)...
[  474s] + 9e230 2e000000 27000000 2e000000 05000000  ....'...........
[  474s] + 9e240 2e000000 30000000 2e000000 1e000000  ....0...........
[  474s] + 9e250 2e000000 2f000000 2e000000 2d000000  ..../.......-...
[  474s] + 9e260 2e000000 04000000 2e000000 1b000000  ................
[  474s] + 9e270 2e000000 28000000 2e000000 06000000  ....(...........
[  474s] + 9e280 2e000000 07000000 2e000000 0c000000  ................
[  474s] + 9e290 2e000000 00000000 00000000           ............    
[  474s]  Contents of section .ARM.extab:
[  474s]   9e29c c91d0181 b0b0ae80 00000000 08b10181  ................
[  474s]   9e2ac b0b00084 00000000 08b10181 b0b00084  ................
[  476s] compare /.build.oldpackages/perl-DBD-SQLite-debuginfo-1.50-1.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-DBD-SQLite-debuginfo-1.50-1.3.armv7l.rpm
[  476s] skipping -debuginfo package
[  476s] compare /.build.oldpackages/perl-DBD-SQLite-debugsource-1.50-1.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-DBD-SQLite-debugsource-1.50-1.3.armv7l.rpm
[  477s] Comparing perl-DBD-SQLite-debugsource-1.50-1.2.armv7l.rpm to perl-DBD-SQLite-debugsource-1.50-1.3.armv7l.rpm
[  477s] This is not a prerelease project. Compare the project name.
[  477s] comparing disturl_distribution
[  478s] comparing the rpm tags of perl-DBD-SQLite-debugsource
[  478s] --- old-rpm-tags
[  478s] +++ new-rpm-tags
[  478s] @@ -150 +150 @@
[  478s] -perl-DBD-SQLite-1.50-1.2.src.rpm
[  478s] +perl-DBD-SQLite-1.50-1.3.src.rpm
[  478s] comparing rpmtags
[  478s] comparing RELEASE
[  478s] comparing PROVIDES
[  478s] comparing scripts
[  478s] comparing filelist
[  478s] comparing file checksum
[  478s] creating rename script
[  478s] RPM meta information is identical
[  478s] No rpmlint.log available
[  478s] 
[  478s] 9d78050e774c finished "build perl-DBD-SQLite.spec" at Tue Dec 17 04:59:39 UTC 2024.
[  478s] 

Retried build at Sat Dec 21 18:24:32 2024 returned same result, skipped