[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 59753fa88ac0 started "build autoconf213.spec" at Wed Oct 22 08:28:51 UTC 2025. [ 0s] [ 0s] Building autoconf213 for project 'Tizen-Base-Toolchain' repository 'standard' arch 'armv7l' srcmd5 '259021431be8b5acdb85bd696e6b7a42' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build-srcdir/autoconf213.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build-srcdir/autoconf213.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/18/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build-srcdir/autoconf213.spec build ... [ 16s] registering binfmt handlers for cross build [ 16s] cycle: nss -> libsoftokn3 [ 16s] breaking dependency nss -> libsoftokn3 [ 16s] [1/43] preinstalling libmagic-data... [ 17s] [2/43] preinstalling libncurses... [ 17s] [3/43] preinstalling setup... [ 17s] [4/43] preinstalling filesystem... [ 17s] [5/43] preinstalling glibc... [ 18s] [6/43] preinstalling libgcc... [ 18s] [7/43] preinstalling bash... [ 18s] [8/43] preinstalling diffutils... [ 18s] [9/43] preinstalling grep... [ 18s] [10/43] preinstalling libattr... [ 18s] [11/43] preinstalling libblkid... [ 18s] [12/43] preinstalling libbz2... [ 18s] [13/43] preinstalling libcap... [ 18s] [14/43] preinstalling libfreebl3... [ 18s] [15/43] preinstalling liblua... [ 18s] [16/43] preinstalling liblzma... [ 18s] [17/43] preinstalling libpopt... [ 18s] [18/43] preinstalling libreadline... [ 18s] [19/43] preinstalling libsmack... [ 18s] [20/43] preinstalling libsqlite... [ 18s] [21/43] preinstalling libuuid... [ 18s] [22/43] preinstalling libxcrypt... [ 18s] [23/43] preinstalling libxml2... [ 18s] [24/43] preinstalling libzstd1... [ 18s] [25/43] preinstalling nspr... [ 18s] [26/43] preinstalling sed... [ 18s] [27/43] preinstalling zlib... [ 18s] [28/43] preinstalling clang-accel-x86_64-armv7l... [ 511s] [29/43] preinstalling qemu-accel-x86_64-armv7l... [ 568s] [30/43] preinstalling qemu-linux-user-x86_64-cross... [ 595s] [31/43] preinstalling coreutils... [ 596s] [32/43] preinstalling libacl... [ 596s] [33/43] preinstalling libelf... [ 596s] [34/43] preinstalling libmount... [ 596s] [35/43] preinstalling smack... [ 596s] [36/43] preinstalling bzip2... [ 596s] [37/43] preinstalling libmagic... [ 596s] [38/43] preinstalling tar... [ 596s] [39/43] preinstalling util-linux... [ 596s] [40/43] preinstalling util-linux-su... [ 596s] [41/43] preinstalling nss... [ 598s] [42/43] preinstalling libsoftokn3... [ 598s] [43/43] preinstalling rpm... [ 599s] running qemu-linux-user-x86_64-cross postinstall script [ 599s] running qemu-accel-x86_64-armv7l postinstall script [ 599s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 599s] running clang-accel-x86_64-armv7l postinstall script [ 599s] running setup postinstall script [ 599s] chroot: failed to run command '': No such file or directory [ 599s] initializing rpm db... [ 600s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 600s] breaking dependency libxcrypt-devel -> glibc-devel [ 600s] cycle: libsoftokn3 -> nss [ 600s] breaking dependency nss -> libsoftokn3 [ 600s] done [ 600s] querying package ids... [ 601s] [1/105] cumulate libmagic-data-5.45-1.3 [ 601s] [2/105] cumulate setup-0.9-1.1 [ 601s] [3/105] cumulate filesystem-3.1-1.1 [ 601s] [4/105] cumulate glibc-2.40-1.6 [ 601s] [5/105] cumulate libatomic-14.2.0-1.6 [ 601s] [6/105] cumulate libgcc-14.2.0-1.6 [ 601s] [7/105] cumulate bash-3.2.57-1.1 [ 601s] [8/105] cumulate cpio-2.8-1.1 [ 601s] [9/105] cumulate diffutils-3.10-1.1 [ 601s] [10/105] cumulate findutils-4.3.8-1.3 [ 601s] [11/105] cumulate gdbm-1.8.3-1.6 [ 601s] [12/105] cumulate hostname-3.23-1.1 [ 601s] [13/105] cumulate libattr-2.5.1-1.4 [ 601s] [14/105] cumulate libblkid-2.39.3-1.5 [ 601s] [15/105] cumulate libbz2-1.0.8-1.4 [ 601s] [16/105] cumulate libcap-2.73-1.4 [ 601s] [17/105] cumulate libfreebl3-3.109-1.6 [ 601s] [18/105] cumulate libgfortran-14.2.0-1.6 [ 601s] [19/105] cumulate libgomp-14.2.0-1.6 [ 601s] [20/105] cumulate libitm-14.2.0-1.6 [ 601s] [21/105] cumulate libltdl-2.4.7-1.6 [ 601s] [22/105] cumulate liblua-5.1.5-1.3 [ 601s] [23/105] cumulate liblzma-5.6.3-1.6 [ 601s] [24/105] cumulate libopenssl3-3.0.16-1.6 [ 601s] [25/105] cumulate libpcre-8.45-1.3 [ 601s] [26/105] cumulate libpopt-1.16-1.3 [ 601s] [27/105] cumulate libsmack-1.3.1-1.3 [ 601s] [28/105] cumulate libsmartcols-2.39.3-1.5 [ 601s] [29/105] cumulate libsqlite-3.50.2-1.3 [ 601s] [30/105] cumulate libstdc++-14.2.0-1.6 [ 601s] [31/105] cumulate libuuid-2.39.3-1.5 [ 601s] [32/105] cumulate libxcrypt-4.4.36-1.5 [ 601s] [33/105] cumulate libxml2-2.13.5-1.5 [ 601s] [34/105] cumulate libzstd1-1.5.6-1.6 [ 601s] [35/105] cumulate m4-1.4.19-1.1 [ 601s] [36/105] cumulate net-tools-2.0_20121208git-1.3 [ 601s] [37/105] cumulate nspr-4.36-1.3 [ 601s] [38/105] cumulate patch-2.7.6-1.3 [ 601s] [39/105] cumulate pkg-config-0.29.2-1.3 [ 601s] [40/105] cumulate sed-4.1c-1.3 [ 601s] [41/105] cumulate update-alternatives-1.22.2-1.1 [ 601s] [42/105] cumulate which-2.17-1.1 [ 601s] [43/105] cumulate zlib-1.3.1-1.5 [ 601s] [44/105] cumulate build-compare-2023.06.18-1.1 [ 601s] [45/105] cumulate clang-accel-x86_64-armv7l-0.4-1.1 [ 601s] [46/105] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 601s] [47/105] cumulate libstdc++-devel-14.2.0-1.6 [ 601s] [48/105] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-2.1 [ 601s] [49/105] cumulate cpp-14.2.0-1.6 [ 601s] [50/105] cumulate gcc-c++-14.2.0-1.6 [ 601s] [51/105] cumulate binutils-libs-2.43-1.6 [ 601s] [52/105] cumulate coreutils-6.9-14.1 [ 601s] [53/105] cumulate gawk-3.1.5-1.1 [ 601s] [54/105] cumulate grep-2.5.2-1.3 [ 601s] [55/105] cumulate libacl-2.3.2-1.3 [ 601s] [56/105] cumulate libcc1-14.2.0-1.6 [ 601s] [57/105] cumulate libelf-0.189-1.6 [ 601s] [58/105] cumulate libmount-2.39.3-1.5 [ 601s] [59/105] cumulate make-4.4.1-1.3 [ 601s] [60/105] cumulate nss-certs-3.109-1.6 [ 601s] [61/105] cumulate smack-1.3.1-1.3 [ 601s] [62/105] cumulate bzip2-1.0.8-1.4 [ 601s] [63/105] cumulate libfdisk-2.39.3-1.5 [ 601s] [64/105] cumulate libllvm-19.1.4-1.1 [ 601s] [65/105] cumulate libmagic-5.45-1.3 [ 601s] [66/105] cumulate xz-5.6.3-1.6 [ 601s] [67/105] cumulate lldb-19.1.4-1.1 [ 601s] [68/105] cumulate perl-5.38.0-1.5 [ 601s] [69/105] cumulate build-mkbaselibs-20120927-1.1 [ 601s] [70/105] cumulate linux-glibc-devel-6.6-1.5 [ 601s] [71/105] cumulate terminfo-base-full-6.4-1.6 [ 601s] [72/105] cumulate texinfo-7.1-1.4 [ 601s] [73/105] cumulate autoconf-2.71-1.6 [ 601s] [74/105] cumulate glibc-locale-2.40-1.6 [ 601s] [75/105] cumulate tar-1.17-1.1 [ 601s] [76/105] cumulate binutils-2.43-1.6 [ 601s] [77/105] cumulate file-5.45-1.3 [ 601s] [78/105] cumulate gzip-1.3.12-1.3 [ 601s] [79/105] cumulate pam-1.1.6-1.3 [ 601s] [80/105] cumulate tzdata-2024b-1.1 [ 601s] [81/105] cumulate libdw-0.189-1.6 [ 601s] [82/105] cumulate llvm-19.1.4-1.1 [ 601s] [83/105] cumulate gcc-14.2.0-1.6 [ 601s] [84/105] cumulate libarchive-3.8.1-1.5 [ 601s] [85/105] cumulate makeinfo-7.1-1.4 [ 601s] [86/105] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 601s] [87/105] cumulate automake-1.16.5-1.6 [ 601s] [88/105] cumulate libasm-0.189-1.6 [ 601s] [89/105] cumulate libncurses6-6.4-1.6 [ 601s] [90/105] cumulate build-20120927-1.1 [ 601s] [91/105] cumulate clang-19.1.4-1.1 [ 601s] [92/105] cumulate llvm-devel-19.1.4-1.1 [ 601s] [93/105] cumulate libncurses-6.4-1.6 [ 601s] [94/105] cumulate less-668-1.1 [ 601s] [95/105] cumulate libreadline-5.2-1.6 [ 601s] [96/105] cumulate libtool-2.4.7-1.6 [ 601s] [97/105] cumulate elfutils-0.189-1.6 [ 601s] [98/105] cumulate util-linux-2.39.3-1.5 [ 601s] [99/105] cumulate util-linux-su-2.39.3-1.5 [ 601s] [100/105] cumulate libxcrypt-devel-4.4.36-1.5 [ 601s] [101/105] cumulate nss-3.109-1.6 [ 601s] [102/105] cumulate glibc-devel-2.40-1.6 [ 601s] [103/105] cumulate libsoftokn3-3.109-1.6 [ 601s] [104/105] cumulate rpm-4.14.1.1-1.6 [ 601s] [105/105] cumulate rpm-build-4.14.1.1-1.6 [ 601s] now installing cumulated packages [ 801s] Preparing... ######################################## [ 801s] Updating / installing... [ 801s] setup-0.9-1.1 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 801s] ########################## [ 801s] filesystem-3.1-1.1 ######################################## [ 802s] libmagic-data-5.45-1.3 ######################################## [ 803s] glibc-2.40-1.6 ######################################## [ 803s] libgcc-14.2.0-1.6 ######################################## [ 804s] bash-3.2.57-1.1 ######################################## [ 804s] zlib-1.3.1-1.5 ######################################## [ 804s] libstdc++-14.2.0-1.6 ######################################## [ 805s] coreutils-6.9-14.1 ######################################## [ 805s] libelf-0.189-1.6 ######################################## [ 805s] libbz2-1.0.8-1.4 ######################################## [ 805s] liblzma-5.6.3-1.6 ######################################## [ 806s] libdw-0.189-1.6 ######################################## [ 806s] libxcrypt-4.4.36-1.5 ######################################## [ 806s] libblkid-2.39.3-1.5 ######################################## [ 807s] nspr-4.36-1.3 ######################################## [ 807s] pam-1.1.6-1.3 ######################################## [ 807s] libmagic-5.45-1.3 ######################################## [ 807s] libfreebl3-3.109-1.6 ######################################## [ 808s] libpopt-1.16-1.3 ######################################## [ 808s] libuuid-2.39.3-1.5 ######################################## [ 809s] linux-glibc-devel-6.6-1.5 ######################################## [ 809s] terminfo-base-full-6.4-1.6 ######################################## [ 809s] libncurses6-6.4-1.6 ######################################## [ 810s] libreadline-5.2-1.6 ######################################## [ 810s] libfdisk-2.39.3-1.5 ######################################## [ 810s] nss-certs-3.109-1.6 ######################################## [ 810s] libmount-2.39.3-1.5 ######################################## [ 810s] libasm-0.189-1.6 ######################################## [ 810s] xz-5.6.3-1.6 ######################################## [ 811s] bzip2-1.0.8-1.4 ######################################## [ 811s] gzip-1.3.12-1.3 ######################################## [ 811s] libcc1-14.2.0-1.6 ######################################## [ 819s] libllvm-19.1.4-1.1 ######################################## [ 831s] lldb-19.1.4-1.1 ######################################## [ 976s] llvm-19.1.4-1.1 ######################################## [ 979s] binutils-libs-2.43-1.6 ######################################## [ 983s] binutils-2.43-1.6 ######################################## [ 983s] make-4.4.1-1.3 ######################################## [ 983s] findutils-4.3.8-1.3 ######################################## [ 983s] gdbm-1.8.3-1.6 ######################################## [ 993s] perl-5.38.0-1.5 ######################################## [ 993s] build-mkbaselibs-20120927-1.1 ######################################## [ 994s] texinfo-7.1-1.4 ######################################## [ 994s] libattr-2.5.1-1.4 ######################################## [ 995s] libacl-2.3.2-1.3 ######################################## [ 995s] tar-1.17-1.1 ######################################## [ 995s] libcap-2.73-1.4 ######################################## [ 996s] libgfortran-14.2.0-1.6 ######################################## [ 996s] libgomp-14.2.0-1.6 ######################################## [ 996s] libitm-14.2.0-1.6 ######################################## [ 996s] libltdl-2.4.7-1.6 ######################################## [ 997s] liblua-5.1.5-1.3 ######################################## [ 997s] libopenssl3-3.0.16-1.6 ######################################## [ 998s] libpcre-8.45-1.3 ######################################## [ 998s] libsmack-1.3.1-1.3 ######################################## [ 998s] libsmartcols-2.39.3-1.5 ######################################## [ 998s] libsqlite-3.50.2-1.3 ######################################## [ 999s] libsoftokn3-3.109-1.6 ######################################## [ 999s] nss-3.109-1.6 ######################################## [ 999s] libxml2-2.13.5-1.5 ######################################## [ 999s] libarchive-3.8.1-1.5 ######################################## [ 1000s] libzstd1-1.5.6-1.6 ######################################## [ 1000s] rpm-4.14.1.1-1.6 ######################################## [ 1001s] m4-1.4.19-1.1 ######################################## [ 1001s] autoconf-2.71-1.6 ######################################## [ 1001s] automake-1.16.5-1.6 ######################################## [ 1001s] patch-2.7.6-1.3 ######################################## [ 1001s] pkg-config-0.29.2-1.3 ######################################## [ 1001s] libxcrypt-devel-4.4.36-1.5 ######################################## [ 1002s] glibc-devel-2.40-1.6 ######################################## [ 1002s] sed-4.1c-1.3 ######################################## [ 1003s] util-linux-2.39.3-1.5 ######################################## [ 1003s] libatomic-14.2.0-1.6 ######################################## [ 1003s] libtool-2.4.7-1.6 ######################################## [ 1003s] build-20120927-1.1 ######################################## [ 1003s] makeinfo-7.1-1.4 ######################################## [ 1003s] libncurses-6.4-1.6 ######################################## [ 1006s] libstdc++-devel-14.2.0-1.6 ######################################## [ 1006s] build-compare-2023.06.18-1.1 ######################################## [ 1331s] clang-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 1336s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 1353s] qemu-linux-user-x86_64-cross-9.2.3.1-2######################################## [ 1359s] gcc-14.2.0-1.6 ######################################## [ 1390s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 1392s] util-linux-su-2.39.3-1.5 ######################################## [ 1392s] rpm-build-4.14.1.1-1.6 ######################################## [ 1392s] smack-1.3.1-1.3 ######################################## [ 1392s] grep-2.5.2-1.3 ######################################## [ 1510s] clang-19.1.4-1.1 ######################################## [ 1528s] llvm-devel-19.1.4-1.1 ######################################## [ 1528s] elfutils-0.189-1.6 ######################################## [ 1528s] less-668-1.1 ######################################## [ 1528s] file-5.45-1.3 ######################################## [ 1530s] glibc-locale-2.40-1.6 ######################################## [ 1530s] tzdata-2024b-1.1 ######################################## [ 1533s] cpp-14.2.0-1.6 ######################################## [ 1535s] gcc-c++-14.2.0-1.6 ######################################## [ 1535s] gawk-3.1.5-1.1 ######################################## [ 1535s] cpio-2.8-1.1 ######################################## [ 1535s] diffutils-3.10-1.1 ######################################## [ 1535s] hostname-3.23-1.1 ######################################## [ 1535s] net-tools-2.0_20121208git-1.3 ######################################## [ 1535s] update-alternatives-1.22.2-1.1 ######################################## [ 1535s] which-2.17-1.1 ######################################## [ 1536s] now finalizing build dir... [ 1538s] ----------------------------------------------------------------- [ 1538s] I have the following modifications for autoconf213.spec: [ 1538s] 9c9 [ 1538s] < Release: 1 [ 1538s] --- [ 1538s] > Release: 1.1 [ 1539s] build target is armv7l-tizen-linux [ 1539s] ----------------------------------------------------------------- [ 1539s] ----- building autoconf213.spec (user abuild) [ 1539s] ----------------------------------------------------------------- [ 1539s] ----------------------------------------------------------------- [ 1539s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/259021431be8b5acdb85bd696e6b7a42-autoconf213' /home/abuild/rpmbuild/SOURCES/autoconf213.spec [ 1539s] Building target platforms: armv7l-tizen-linux [ 1539s] Building for target armv7l-tizen-linux [ 1539s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.5NJxmQ [ 1539s] + umask 022 [ 1539s] + cd /home/abuild/rpmbuild/BUILD [ 1539s] + cd /home/abuild/rpmbuild/BUILD [ 1539s] + rm -rf autoconf-2.13 [ 1539s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/autoconf-2.13.tar.bz2 [ 1539s] + /bin/tar -xof - [ 1539s] + STATUS=0 [ 1539s] + '[' 0 -ne 0 ']' [ 1539s] + cd autoconf-2.13 [ 1539s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 1540s] + echo 'Patch #0 (0001-autoconf-2.12-race.patch):' [ 1540s] Patch #0 (0001-autoconf-2.12-race.patch): [ 1540s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 1540s] patching file autoconf.sh [ 1540s] patching file autoheader.sh [ 1540s] patching file autoupdate.sh [ 1540s] + echo 'Patch #1 (0002-autoconf-2.13-mawk.patch):' [ 1540s] Patch #1 (0002-autoconf-2.13-mawk.patch): [ 1540s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 1540s] patching file acspecific.m4 [ 1540s] patching file autoconf.texi [ 1540s] patching file configure [ 1540s] + echo 'Patch #2 (0003-autoconf-2.13-notmp.patch):' [ 1540s] Patch #2 (0003-autoconf-2.13-notmp.patch): [ 1540s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 1540s] patching file autoconf.sh [ 1540s] patching file autoupdate.sh [ 1540s] + echo 'Patch #3 (0004-autoconf-2.13-c-exit.patch):' [ 1540s] Patch #3 (0004-autoconf-2.13-c-exit.patch): [ 1540s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 1540s] patching file acgeneral.m4 [ 1540s] patching file acspecific.m4 [ 1540s] + echo 'Patch #4 (0005-autoconf-2.13-headers.patch):' [ 1540s] Patch #4 (0005-autoconf-2.13-headers.patch): [ 1540s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 1540s] patching file acspecific.m4 [ 1540s] + echo 'Patch #5 (0006-autoconf-2.13-autoscan.patch):' [ 1540s] Patch #5 (0006-autoconf-2.13-autoscan.patch): [ 1540s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 1540s] patching file autoscan.pl [ 1540s] + echo 'Patch #6 (0007-autoconf-2.13-exit.patch):' [ 1540s] Patch #6 (0007-autoconf-2.13-exit.patch): [ 1540s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 1540s] patching file acgeneral.m4 [ 1540s] + echo 'Patch #7 (0008-autoconf-2.13-wait3test.patch):' [ 1540s] Patch #7 (0008-autoconf-2.13-wait3test.patch): [ 1540s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 1540s] patching file acspecific.m4 [ 1540s] + echo 'Patch #8 (0009-autoconf-2.13-make-defs-62361.patch):' [ 1540s] Patch #8 (0009-autoconf-2.13-make-defs-62361.patch): [ 1540s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 1540s] patching file acgeneral.m4 [ 1540s] + echo 'Patch #9 (0010-autoconf-2.13-versioning.patch):' [ 1540s] Patch #9 (0010-autoconf-2.13-versioning.patch): [ 1540s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 1540s] patching file Makefile.in [ 1540s] + echo 'Patch #10 (0011-autoconf213-destdir.patch):' [ 1540s] Patch #10 (0011-autoconf213-destdir.patch): [ 1540s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 1540s] patching file Makefile.in [ 1540s] + echo 'Patch #11 (0012-autoconf213-info.patch):' [ 1540s] Patch #11 (0012-autoconf213-info.patch): [ 1540s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 1540s] patching file Makefile.in [ 1540s] patching file autoconf.texi [ 1540s] + cp /home/abuild/rpmbuild/SOURCES/autoconf213.manifest . [ 1540s] + mv autoconf.texi autoconf213.texi [ 1540s] + rm -f autoconf.info [ 1540s] + exit 0 [ 1540s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.oj6tVg [ 1540s] + umask 022 [ 1540s] + cd /home/abuild/rpmbuild/BUILD [ 1540s] + CFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g -Wformat-security' [ 1540s] + export CFLAGS [ 1540s] + CXXFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g -Wformat-security' [ 1540s] + export CXXFLAGS [ 1540s] + FFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g ' [ 1540s] + export FFLAGS [ 1540s] + FCFLAGS='-Os -fstack-protector -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wa,-mimplicit-it=thumb -Wno-unused-command-line-argument -D_FILE_OFFSET_BITS=64 -g ' [ 1540s] + export FCFLAGS [ 1540s] + LDFLAGS=-Wl,-z,relro,--as-needed,-O1,--hash-style=gnu [ 1540s] + export LDFLAGS [ 1540s] + cd autoconf-2.13 [ 1540s] + ref=/usr/lib/rpm [ 1540s] + mints=0 [ 1540s] + case $(uname -m) in [ 1540s] ++ uname -m [ 1540s] + for s in guess sub [ 1540s] ++ find -maxdepth 8 -name config.guess [ 1540s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 1540s] + grep -q config-patches@ ./config.guess [ 1540s] + continue [ 1540s] + for s in guess sub [ 1540s] ++ find -maxdepth 8 -name config.sub [ 1540s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 1540s] + grep -q config-patches@ ./config.sub [ 1540s] + continue [ 1540s] + export AR=llvm-ar RANLIB=llvm-ranlib [ 1540s] + AR=llvm-ar [ 1540s] + RANLIB=llvm-ranlib [ 1540s] + export CC=armv7l-tizen-linux-gnueabi-clang CXX=armv7l-tizen-linux-gnueabi-clang++ [ 1540s] + CC=armv7l-tizen-linux-gnueabi-clang [ 1540s] + CXX=armv7l-tizen-linux-gnueabi-clang++ [ 1540s] + ./configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --program-suffix=-2.13 [ 1540s] creating cache ./config.cache [ 1540s] checking for gm4... no [ 1540s] checking for gnum4... no [ 1540s] checking for m4... /bin/m4 [ 1540s] checking for gawk... gawk [ 1540s] checking for perl... /bin/perl [ 1540s] checking for a BSD compatible install... /bin/install -c [ 1540s] updating cache ./config.cache [ 1541s] creating ./config.status [ 1541s] creating Makefile [ 1541s] creating testsuite/Makefile [ 1541s] + make [ 1541s] cd . && \ [ 1541s] rm -f configure configure.tmp && \ [ 1541s] /bin/m4 autoconf.m4 configure.in > configure.tmp && \ [ 1541s] chmod +x configure.tmp && mv configure.tmp configure [ 1541s] /bin/sh ./config.status --recheck [ 1541s] running /bin/sh ./configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --program-suffix=-2.13 --no-create --no-recursion [ 1541s] loading cache ./config.cache [ 1541s] checking for gm4... (cached) /bin/m4 [ 1541s] checking for gawk... (cached) gawk [ 1541s] checking for perl... (cached) /bin/perl [ 1541s] checking for a BSD compatible install... (cached) /bin/install -c [ 1541s] creating ./config.status [ 1541s] /bin/sh ./config.status [ 1541s] creating Makefile [ 1541s] creating testsuite/Makefile [ 1541s] rm -f autoconf autoconf.tmp [ 1541s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoconf.sh > autoconf.tmp && chmod +x autoconf.tmp && mv autoconf.tmp autoconf [ 1541s] rm -f autoheader autoheader.tmp [ 1541s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoheader.sh > autoheader.tmp && chmod +x autoheader.tmp && mv autoheader.tmp autoheader [ 1541s] rm -f autoreconf autoreconf.tmp [ 1541s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoreconf.sh > autoreconf.tmp && chmod +x autoreconf.tmp && mv autoreconf.tmp autoreconf [ 1541s] rm -f autoupdate autoupdate.tmp [ 1541s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoupdate.sh > autoupdate.tmp && chmod +x autoupdate.tmp && mv autoupdate.tmp autoupdate [ 1541s] rm -f ifnames ifnames.tmp [ 1541s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' ifnames.sh > ifnames.tmp && chmod +x ifnames.tmp && mv ifnames.tmp ifnames [ 1541s] rm -f autoscan autoscan.tmp [ 1541s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''PERL''@,/bin/perl,g' autoscan.pl > autoscan.tmp && chmod +x autoscan.tmp && mv autoscan.tmp autoscan [ 1541s] freezing autoconf.m4 [ 1541s] freezing autoheader.m4 [ 1541s] makeinfo -I. ./autoconf213.texi --no-split --output=autoconf213.info [ 1555s] + exit 0 [ 1555s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.dHe21o [ 1555s] + umask 022 [ 1555s] + cd /home/abuild/rpmbuild/BUILD [ 1555s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 1555s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 1555s] + cd autoconf-2.13 [ 1555s] + export AR=llvm-ar RANLIB=llvm-ranlib [ 1555s] + AR=llvm-ar [ 1555s] + RANLIB=llvm-ranlib [ 1555s] + export CC=armv7l-tizen-linux-gnueabi-clang CXX=armv7l-tizen-linux-gnueabi-clang++ [ 1555s] + CC=armv7l-tizen-linux-gnueabi-clang [ 1555s] + CXX=armv7l-tizen-linux-gnueabi-clang++ [ 1555s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm install [ 1555s] /bin/sh ./mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/bin /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/info /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13 [ 1555s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr [ 1555s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/bin [ 1555s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share [ 1555s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/info [ 1555s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/autoconf-2.13 [ 1555s] if test -f autoconf213.info; then \ [ 1555s] for i in *.info*; do \ [ 1555s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/info/$i; \ [ 1555s] done; \ [ 1555s] else \ [ 1555s] for i in ./*.info*; do \ [ 1555s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/info/`echo $i | sed 's|^./||'`; \ [ 1555s] done; \ [ 1555s] fi [ 1555s] for p in autoconf autoheader autoreconf autoupdate ifnames ; do \ [ 1555s] /bin/install -c $p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/bin/`echo $p|sed 's,$,-2.13,; '`; \ [ 1555s] done [ 1555s] for i in autoconf.m4f autoheader.m4f; do \ [ 1555s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13/$i; \ [ 1555s] done [ 1555s] for i in autoconf.m4 acgeneral.m4 acoldnames.m4 acspecific.m4 autoheader.m4 acconfig.h; do \ [ 1555s] /bin/install -c -m 644 ./$i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13/$i; \ [ 1555s] done [ 1555s] if test -f autoscan; then \ [ 1555s] /bin/install -c autoscan /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/bin/`echo autoscan|sed 's,$,-2.13,; '`; \ [ 1555s] for i in acfunctions acheaders acidentifiers acprograms \ [ 1555s] acmakevars; do \ [ 1555s] /bin/install -c -m 644 ./$i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13/$i; \ [ 1555s] done; \ [ 1555s] else :; fi [ 1555s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/info/dir [ 1555s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm -regex '.*\.la$' [ 1555s] + xargs rm -f -- [ 1555s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm -regex '.*\.a$' [ 1555s] + xargs rm -f -- [ 1555s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/info/standards.info [ 1555s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.13-1.1 --unique-debug-src-base autoconf213-2.13-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/autoconf-2.13 [ 1556s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/autoconf-2.13/autoconf213-debuginfo.manifest [ 1556s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/autoconf-2.13/autoconf213-debugsource.manifest [ 1556s] + /usr/lib/rpm/check-buildroot [ 1556s] + /usr/lib/rpm//brp-compress [ 1556s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 1556s] + /usr/lib/rpm/brp-python-hardlink [ 1556s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 1556s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/autoconf-2.13/isu.list [ 1556s] ~/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm ~/rpmbuild/BUILD/autoconf-2.13 [ 1556s] ~/rpmbuild/BUILD/autoconf-2.13 [ 1556s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 1557s] Processing files: autoconf213-2.13-1.1.noarch [ 1557s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 1557s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 1557s] [ 1557s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.rvyjoo [ 1557s] + umask 022 [ 1557s] + cd /home/abuild/rpmbuild/BUILD [ 1557s] + cd autoconf-2.13 [ 1557s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 1557s] + export LC_ALL=C [ 1557s] + LC_ALL=C [ 1557s] + export DOCDIR [ 1557s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 1557s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 1557s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 1557s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 1557s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 1557s] + cp -pr TODO /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 1557s] + exit 0 [ 1557s] Provides: autoconf213 = 2.13-1.1 [ 1557s] Requires(interp): /bin/sh /bin/sh [ 1557s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 1557s] Requires(post): /bin/sh [ 1557s] Requires(postun): /bin/sh [ 1557s] Requires: /bin/perl /bin/sh [ 1557s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 1557s] sh: --version: command not found [ 1557s] rpm: no arguments given for query [ 1557s] Wrote: /home/abuild/rpmbuild/SRPMS/autoconf213-2.13-1.1.src.rpm [ 1557s] sh: --version: command not found [ 1557s] rpm: no arguments given for query [ 1557s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/autoconf213-2.13-1.1.noarch.rpm [ 1557s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.nHco09 [ 1557s] + umask 022 [ 1557s] + cd /home/abuild/rpmbuild/BUILD [ 1557s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 1557s] + cd autoconf-2.13 [ 1557s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 1557s] + exit 0 [ 1558s] ... checking for files with abuild user/group [ 1558s] ... creating baselibs [ 1559s] [ 1559s] 59753fa88ac0 finished "build autoconf213.spec" at Wed Oct 22 08:54:50 UTC 2025. [ 1559s] Retried build at Thu Oct 23 04:55:44 2025 returned same result, skipped Retried build at Thu Oct 23 12:21:50 2025 returned same result, skipped