[    0s] on X86_64, no limit mem size
[    0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4
[    0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l
[    0s] 
[    1s] 
[    1s] 8aea0a10cbff started "build perl-DBD-SQLite.spec" at Fri Nov 29 16:27:39 UTC 2024.
[    1s] 
[    1s] Building perl-DBD-SQLite for project 'Tizen-Base' repository 'standard' arch 'aarch64' srcmd5 '4fb418fbb3d4945c6ef63c7af57f58a8'
[    1s] 
[    1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build-srcdir/perl-DBD-SQLite.spec ...
[    1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build-srcdir/perl-DBD-SQLite.spec
[    1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build-srcdir/perl-DBD-SQLite.spec build ...
[    3s] registering binfmt handlers for cross build
[    6s] cycle: nss -> libsoftokn3
[    6s]   breaking dependency nss -> libsoftokn3
[    6s] [1/42] preinstalling libmagic-data...
[    6s] [2/42] preinstalling libncurses...
[    6s] [3/42] preinstalling setup...
[    7s] [4/42] preinstalling filesystem...
[    7s] [5/42] preinstalling glibc...
[    7s] [6/42] preinstalling bash...
[    8s] [7/42] preinstalling diffutils...
[    8s] [8/42] preinstalling grep...
[    8s] [9/42] preinstalling libattr...
[    9s] [10/42] preinstalling libblkid...
[    9s] [11/42] preinstalling libbz2...
[    9s] [12/42] preinstalling libfreebl3...
[    9s] [13/42] preinstalling libgcc...
[   10s] [14/42] preinstalling liblua...
[   10s] [15/42] preinstalling liblzma...
[   10s] [16/42] preinstalling libpopt...
[   10s] [17/42] preinstalling libreadline...
[   11s] [18/42] preinstalling libsmack...
[   11s] [19/42] preinstalling libsqlite...
[   11s] [20/42] preinstalling libuuid...
[   11s] [21/42] preinstalling libxcrypt...
[   12s] [22/42] preinstalling libzstd1...
[   12s] [23/42] preinstalling nspr...
[   12s] [24/42] preinstalling sed...
[   12s] [25/42] preinstalling zlib...
[   12s] [26/42] preinstalling qemu-accel-x86_64-aarch64...
[   34s] [27/42] preinstalling qemu-linux-user-x86_64-cross...
[   40s] [28/42] preinstalling coreutils...
[   41s] [29/42] preinstalling libacl...
[   41s] [30/42] preinstalling libcap...
[   41s] [31/42] preinstalling libelf...
[   41s] [32/42] preinstalling libmount...
[   41s] [33/42] preinstalling smack...
[   42s] [34/42] preinstalling bzip2...
[   42s] [35/42] preinstalling libmagic...
[   42s] [36/42] preinstalling libxml2...
[   42s] [37/42] preinstalling tar...
[   42s] [38/42] preinstalling util-linux...
[   43s] [39/42] preinstalling util-linux-su...
[   43s] [40/42] preinstalling nss...
[   44s] [41/42] preinstalling libsoftokn3...
[   44s] [42/42] preinstalling rpm...
[   45s] running qemu-linux-user-x86_64-cross postinstall script
[   46s] running qemu-accel-x86_64-aarch64 postinstall script
[   46s] mv: cannot stat `/usr/lib64/gcc/aarch64-tizen-linux-gnu/14.1.0/liblto_plugin.so': No such file or directory
[   46s] running setup postinstall script
[   46s] chroot: failed to run command '<lua>': No such file or directory
[   46s] initializing rpm db...
[   47s] reordering...cycle: libxcrypt-devel -> glibc-devel
[   47s]   breaking dependency libxcrypt-devel -> glibc-devel
[   47s] cycle: libsoftokn3 -> nss
[   47s]   breaking dependency nss -> libsoftokn3
[   47s] done
[   47s] querying package ids...
[   50s] [1/100] cumulate libmagic-data-5.45-1.3
[   50s] [2/100] cumulate setup-0.9-1.1
[   50s] [3/100] cumulate filesystem-3.1-1.1
[   50s] [4/100] cumulate glibc-2.39-1.6
[   50s] [5/100] cumulate bash-3.2.57-1.1
[   50s] [6/100] cumulate cpio-2.8-1.1
[   50s] [7/100] cumulate diffutils-3.10-1.1
[   50s] [8/100] cumulate findutils-4.3.8-1.4
[   50s] [9/100] cumulate gdbm-1.8.3-1.6
[   50s] [10/100] cumulate hostname-3.23-1.1
[   50s] [11/100] cumulate libatomic-14.1.0-1.6
[   50s] [12/100] cumulate libattr-2.5.1-1.4
[   50s] [13/100] cumulate libblkid-2.39.3-1.3
[   50s] [14/100] cumulate libbz2-1.0.8-1.4
[   50s] [15/100] cumulate libfreebl3-3.98-1.6
[   50s] [16/100] cumulate libgcc-14.1.0-1.6
[   50s] [17/100] cumulate libgomp-14.1.0-1.6
[   50s] [18/100] cumulate libitm-14.1.0-1.6
[   50s] [19/100] cumulate libltdl-2.4.7-1.6
[   50s] [20/100] cumulate liblua-5.1.5-1.3
[   50s] [21/100] cumulate liblzma-5.4.5-1.6
[   50s] [22/100] cumulate libopenssl3-3.0.13-1.6
[   50s] [23/100] cumulate libpcre-8.45-1.4
[   50s] [24/100] cumulate libpopt-1.16-1.3
[   50s] [25/100] cumulate libsmack-1.3.1-1.3
[   50s] [26/100] cumulate libsmartcols-2.39.3-1.3
[   50s] [27/100] cumulate libsqlite-3.44.0-1.4
[   50s] [28/100] cumulate libuuid-2.39.3-1.3
[   50s] [29/100] cumulate libxcrypt-4.4.36-1.6
[   50s] [30/100] cumulate libzstd1-1.5.5-1.4
[   50s] [31/100] cumulate m4-1.4.19-1.1
[   50s] [32/100] cumulate net-tools-2.0_20121208git-1.3
[   50s] [33/100] cumulate nspr-4.35-1.3
[   50s] [34/100] cumulate patch-2.7.6-1.3
[   50s] [35/100] cumulate pkg-config-0.29.2-1.4
[   50s] [36/100] cumulate sed-4.1c-1.3
[   50s] [37/100] cumulate update-alternatives-1.22.2-1.1
[   50s] [38/100] cumulate which-2.17-1.1
[   50s] [39/100] cumulate zlib-1.3-1.5
[   50s] [40/100] cumulate build-compare-2023.06.18-1.1
[   50s] [41/100] cumulate hal-rootstrap-checker-0.1.0-1.1
[   50s] [42/100] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1
[   50s] [43/100] cumulate binutils-libs-2.43-1.6
[   50s] [44/100] cumulate coreutils-6.9-14.1
[   50s] [45/100] cumulate cpp-14.1.0-1.6
[   50s] [46/100] cumulate gawk-3.1.5-1.1
[   50s] [47/100] cumulate gcc-c++-14.1.0-1.6
[   50s] [48/100] cumulate grep-2.5.2-1.3
[   50s] [49/100] cumulate libacl-2.3.2-1.4
[   50s] [50/100] cumulate libcap-2.69-1.5
[   50s] [51/100] cumulate libelf-0.189-1.6
[   50s] [52/100] cumulate libgfortran-14.1.0-1.6
[   50s] [53/100] cumulate libmount-2.39.3-1.3
[   50s] [54/100] cumulate libstdc++-14.1.0-1.6
[   50s] [55/100] cumulate make-4.4-1.4
[   50s] [56/100] cumulate nss-certs-3.98-1.6
[   50s] [57/100] cumulate smack-1.3.1-1.3
[   50s] [58/100] cumulate bzip2-1.0.8-1.4
[   50s] [59/100] cumulate libfdisk-2.39.3-1.3
[   50s] [60/100] cumulate libmagic-5.45-1.3
[   50s] [61/100] cumulate libxml2-2.12.5-1.5
[   50s] [62/100] cumulate xz-5.4.5-1.6
[   50s] [63/100] cumulate perl-5.38.0-1.4
[   50s] [64/100] cumulate build-mkbaselibs-20120927-1.1
[   50s] [65/100] cumulate libstdc++-devel-14.1.0-1.6
[   50s] [66/100] cumulate linux-glibc-devel-6.6-1.6
[   50s] [67/100] cumulate file-5.45-1.3
[   50s] [68/100] cumulate perl-DBI-1.628-1.1
[   50s] [69/100] cumulate tar-1.17-1.1
[   50s] [70/100] cumulate terminfo-base-full-6.4-1.6
[   50s] [71/100] cumulate autoconf-2.71-1.6
[   50s] [72/100] cumulate glibc-locale-2.39-1.6
[   50s] [73/100] cumulate gzip-1.3.12-1.3
[   50s] [74/100] cumulate libcc1-14.1.0-1.6
[   50s] [75/100] cumulate libhwasan-14.1.0-1.6
[   50s] [76/100] cumulate libubsan-14.1.0-1.6
[   50s] [77/100] cumulate binutils-2.43-1.6
[   50s] [78/100] cumulate pam-1.1.6-1.3
[   50s] [79/100] cumulate tzdata-2023c-1.1
[   50s] [80/100] cumulate libdw-0.189-1.6
[   50s] [81/100] cumulate libarchive-3.7.2-1.5
[   50s] [82/100] cumulate automake-1.16.5-1.6
[   50s] [83/100] cumulate libasm-0.189-1.6
[   50s] [84/100] cumulate libncurses6-6.4-1.6
[   50s] [85/100] cumulate build-20120927-1.1
[   50s] [86/100] cumulate gcc-14.1.0-1.6
[   50s] [87/100] cumulate libncurses-6.4-1.6
[   50s] [88/100] cumulate less-643-1.1
[   50s] [89/100] cumulate libreadline-5.2-1.5
[   50s] [90/100] cumulate qemu-accel-x86_64-aarch64-0.4-1.1
[   50s] [91/100] cumulate libtool-2.4.7-1.6
[   50s] [92/100] cumulate elfutils-0.189-1.6
[   50s] [93/100] cumulate util-linux-2.39.3-1.3
[   50s] [94/100] cumulate util-linux-su-2.39.3-1.3
[   50s] [95/100] cumulate libxcrypt-devel-4.4.36-1.6
[   50s] [96/100] cumulate nss-3.98-1.6
[   50s] [97/100] cumulate glibc-devel-2.39-1.6
[   50s] [98/100] cumulate libsoftokn3-3.98-1.6
[   50s] [99/100] cumulate rpm-4.14.1.1-1.6
[   50s] [100/100] cumulate rpm-build-4.14.1.1-1.6
[   50s] now installing cumulated packages
[   52s] Preparing...                          ########################################
[   52s] Updating / installing...
[   52s] setup-0.9-1.1                         ########################################
[   52s] filesystem-3.1-1.1                    ########################################
[   53s] glibc-2.39-1.6                        ########################################
[   54s] bash-3.2.57-1.1                       ########################################
[   54s] zlib-1.3-1.5                          ########################################
[   54s] libgcc-14.1.0-1.6                     ########################################
[   55s] libstdc++-14.1.0-1.6                  ########################################
[   55s] coreutils-6.9-14.1                    ########################################
[   55s] libbz2-1.0.8-1.4                      ########################################
[   55s] liblzma-5.4.5-1.6                     ########################################
[   56s] libelf-0.189-1.6                      ########################################
[   56s] libdw-0.189-1.6                       ########################################
[   56s] libxcrypt-4.4.36-1.6                  ########################################
[   57s] libblkid-2.39.3-1.3                   ########################################
[   57s] nspr-4.35-1.3                         ########################################
[   57s] pam-1.1.6-1.3                         ########################################
[   58s] libcap-2.69-1.5                       ########################################
[   58s] libfreebl3-3.98-1.6                   ########################################
[   59s] liblua-5.1.5-1.3                      ########################################
[   59s] libpopt-1.16-1.3                      ########################################
[   60s] libuuid-2.39.3-1.3                    ########################################
[   61s] libzstd1-1.5.5-1.4                    ########################################
[   61s] libfdisk-2.39.3-1.3                   ########################################
[   61s] nss-certs-3.98-1.6                    ########################################
[   61s] libmount-2.39.3-1.3                   ########################################
[   62s] libasm-0.189-1.6                      ########################################
[   62s] libxml2-2.12.5-1.5                    ########################################
[   62s] xz-5.4.5-1.6                          ########################################
[   62s] bzip2-1.0.8-1.4                       ########################################
[   63s] linux-glibc-devel-6.6-1.6             ########################################
[   63s] terminfo-base-full-6.4-1.6            ########################################
[   64s] libncurses6-6.4-1.6                   ########################################
[   64s] libreadline-5.2-1.5                   ########################################
[   64s] gzip-1.3.12-1.3                       ########################################
[   64s] libcc1-14.1.0-1.6                     ########################################
[   65s] libhwasan-14.1.0-1.6                  ########################################
[   65s] libubsan-14.1.0-1.6                   ########################################
[   65s] libgfortran-14.1.0-1.6                ########################################
[   66s] binutils-libs-2.43-1.6                ########################################
[   67s] binutils-2.43-1.6                     ########################################
[   67s] make-4.4-1.4                          ########################################
[   68s] findutils-4.3.8-1.4                   ########################################
[   68s] gdbm-1.8.3-1.6                        ########################################
[   74s] perl-5.38.0-1.4                       ########################################
[   74s] build-mkbaselibs-20120927-1.1         ########################################
[   74s] libatomic-14.1.0-1.6                  ########################################
[   74s] libattr-2.5.1-1.4                     ########################################
[   75s] libacl-2.3.2-1.4                      ########################################
[   75s] tar-1.17-1.1                          ########################################
[   75s] libgomp-14.1.0-1.6                    ########################################
[   75s] libitm-14.1.0-1.6                     ########################################
[   82s] gcc-14.1.0-1.6                        ########################################
[   82s] libltdl-2.4.7-1.6                     ########################################
[   83s] libopenssl3-3.0.13-1.6                ########################################
[   83s] libarchive-3.7.2-1.5                  ########################################
[   84s] libpcre-8.45-1.4                      ########################################
[   84s] libsmack-1.3.1-1.3                    ########################################
[   85s] libsmartcols-2.39.3-1.3               ########################################
[   85s] libsqlite-3.44.0-1.4                  ########################################
[   86s] libsoftokn3-3.98-1.6                  ########################################
[   86s] nss-3.98-1.6                          ########################################
[   87s] m4-1.4.19-1.1                         ########################################
[   87s] autoconf-2.71-1.6                     ########################################
[   87s] automake-1.16.5-1.6                   ########################################
[   88s] patch-2.7.6-1.3                       ########################################
[   88s] pkg-config-0.29.2-1.4                 ########################################
[   88s] libxcrypt-devel-4.4.36-1.6            ########################################
[   88s] glibc-devel-2.39-1.6                  ########################################
[   88s] sed-4.1c-1.3                          ########################################
[   89s] util-linux-2.39.3-1.3                 ########################################
[   89s] libmagic-data-5.45-1.3                ########################################
[   89s] libmagic-5.45-1.3                     ########################################
[   90s] rpm-4.14.1.1-1.6                      ########################################
[   91s] rpm-build-4.14.1.1-1.6                ########################################
[   91s] file-5.45-1.3                         ########################################
[   91s] util-linux-su-2.39.3-1.3              ########################################
[   91s] libtool-2.4.7-1.6                     ########################################
[   91s] smack-1.3.1-1.3                       ########################################
[   91s] grep-2.5.2-1.3                        ########################################
[  110s] qemu-accel-x86_64-aarch64-0.4-1.1     ########################################
[  111s] build-20120927-1.1                    ########################################
[  111s] perl-DBI-1.628-1.1                    ########################################
[  111s] libncurses-6.4-1.6                    ########################################
[  111s] less-643-1.1                          ########################################
[  111s] elfutils-0.189-1.6                    ########################################
[  112s] glibc-locale-2.39-1.6                 ########################################
[  113s] tzdata-2023c-1.1                      ########################################
[  113s] libstdc++-devel-14.1.0-1.6            ########################################
[  116s] cpp-14.1.0-1.6                        ########################################
[  119s] gcc-c++-14.1.0-1.6                    ########################################
[  119s] build-compare-2023.06.18-1.1          ########################################
[  119s] hal-rootstrap-checker-0.1.0-1.1       ########################################
[  125s] qemu-linux-user-x86_64-cross-5.2.0.2-2########################################
[  125s] gawk-3.1.5-1.1                        ########################################
[  126s] cpio-2.8-1.1                          ########################################
[  126s] diffutils-3.10-1.1                    ########################################
[  126s] hostname-3.23-1.1                     ########################################
[  126s] net-tools-2.0_20121208git-1.3         ########################################
[  126s] update-alternatives-1.22.2-1.1        ########################################
[  126s] which-2.17-1.1                        ########################################
[  128s] now finalizing build dir...
[  130s] -----------------------------------------------------------------
[  130s] I have the following modifications for perl-DBD-SQLite.spec:
[  130s] 22c22
[  130s] < Release:        0
[  130s] ---
[  130s] > Release:        1.1
[  131s] build target is aarch64-tizen-linux
[  131s] -----------------------------------------------------------------
[  131s] ----- building perl-DBD-SQLite.spec (user abuild)
[  131s] -----------------------------------------------------------------
[  131s] -----------------------------------------------------------------
[  132s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/4fb418fbb3d4945c6ef63c7af57f58a8-perl-DBD-SQLite' /home/abuild/rpmbuild/SOURCES/perl-DBD-SQLite.spec
[  139s] Building target platforms: aarch64-tizen-linux
[  139s] Building for target aarch64-tizen-linux
[  139s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.6V8rxQ
[  139s] + umask 022
[  139s] + cd /home/abuild/rpmbuild/BUILD
[  139s] + cd /home/abuild/rpmbuild/BUILD
[  139s] + rm -rf DBD-SQLite-1.50
[  139s] + /bin/tar -xof -
[  139s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/DBD-SQLite-1.50.tar.gz
[  139s] + STATUS=0
[  139s] + '[' 0 -ne 0 ']'
[  139s] + cd DBD-SQLite-1.50
[  139s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[  139s] + echo 'Patch #0 (0001-SQLite-fix-error-by-Wimplicit-function-declaration.patch):'
[  139s] Patch #0 (0001-SQLite-fix-error-by-Wimplicit-function-declaration.patch):
[  139s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2
[  139s] patching file SQLite.xs
[  139s] + find . -type f '!' -name '*.pl' -print0
[  139s] + xargs -0 chmod 644
[  139s] + exit 0
[  139s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.tkJO5F
[  139s] + umask 022
[  139s] + cd /home/abuild/rpmbuild/BUILD
[  139s] + cd DBD-SQLite-1.50
[  139s] + ref=/usr/lib/rpm
[  139s] + mints=0
[  139s] + case $(uname -m) in
[  139s] ++ uname -m
[  139s] + mints=20120610
[  139s] + for s in guess sub
[  139s] ++ find -maxdepth 8 -name config.guess
[  139s] + for s in guess sub
[  139s] ++ find -maxdepth 8 -name config.sub
[  139s] + LANG=C
[  139s] + export LANG
[  139s] + unset DISPLAY
[  139s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[  139s] + export CFLAGS
[  139s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[  139s] + export CXXFLAGS
[  139s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir'
[  139s] + export FFLAGS
[  139s] + LDFLAGS=
[  139s] + export LDFLAGS
[  139s] + /bin/perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[  141s] Checking if your kit is complete...
[  141s] Looks good
[  143s] Using DBI 1.628 (for perl 5.038000 on aarch64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBI/
[  143s] Generating a Unix-style Makefile
[  143s] Writing Makefile for DBD::SQLite
[  143s] Writing MYMETA.yml and MYMETA.json
[  143s] + /bin/make -j12
[  143s] "/usr/bin/perl" -p -e "s/~DRIVER~/SQLite/g" /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBI/Driver.xst > SQLite.xsi
[  143s] Running Mkbootstrap for SQLite ()
[  143s] cc -c  -I. -I/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g   -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE"  -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 dbdimp.c
[  143s] In file included from SQLiteXS.h:11,
[  143s]                  from dbdimp.c:6:
[  143s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined
[  143s]  1059 | #define PERL_USE_SAFE_PUTENV
[  143s]       |         ^~~~~~~~~~~~~~~~~~~~
[  143s] <command-line>: note: this is the location of the previous definition
[  143s] cc -c  -I. -I/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g   -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE"  -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 sqlite3.c
[  143s] chmod 644 "SQLite.bs"
[  143s] "/usr/bin/perl" "/usr/lib64/perl5/5.38.0/ExtUtils/xsubpp"  -typemap '/usr/lib64/perl5/5.38.0/ExtUtils/typemap' -typemap '/home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/typemap'  SQLite.xs > SQLite.xsc
[  144s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644
[  144s] dbdimp.c: In function 'sqlite_db_do_sv':
[  144s] dbdimp.c:485:9: warning: unused variable 'i' [-Wunused-variable]
[  144s]   485 |     int i;
[  144s]       |         ^
[  144s] dbdimp.c: In function 'sqlite_db_disconnect':
[  144s] dbdimp.c:636:17: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
[  144s]   636 |         while ( s = imp_dbh->stmt_list ) {
[  144s]       |                 ^
[  144s] dbdimp.c:651:12: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
[  144s]   651 |     while( s = imp_dbh->stmt_list ) {
[  144s]       |            ^
[  144s] dbdimp.c: In function 'sqlite_st_prepare_sv':
[  144s] dbdimp.c:865:9: warning: the address of 'extra' will always evaluate as 'true' [-Waddress]
[  144s]   865 |     if (&extra && imp_dbh->allow_multiple_statements) {
[  144s]       |         ^
[  144s] In file included from /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/perl.h:6168:
[  144s] dbdimp.c: In function 'sqlite_db_func_dispatcher':
[  144s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  144s]   162 | #define POPs            (*sp--)
[  144s]       |                         ~^~~~~~
[  144s] dbdimp.c:1635:9: note: in expansion of macro 'POPs'
[  144s]  1635 |         POPs;
[  144s]       |         ^~~~
[  144s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  144s]   162 | #define POPs            (*sp--)
[  144s]       |                         ~^~~~~~
[  144s] dbdimp.c:1643:13: note: in expansion of macro 'POPs'
[  144s]  1643 |             POPs;
[  144s]       |             ^~~~
[  144s] dbdimp.c: In function 'sqlite_db_aggr_new_dispatcher':
[  144s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  144s]   162 | #define POPs            (*sp--)
[  144s]       |                         ~^~~~~~
[  144s] dbdimp.c:1820:9: note: in expansion of macro 'POPs'
[  144s]  1820 |         POPs;
[  144s]       |         ^~~~
[  144s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  144s]   162 | #define POPs            (*sp--)
[  144s]       |                         ~^~~~~~
[  144s] dbdimp.c:1828:13: note: in expansion of macro 'POPs'
[  144s]  1828 |             POPs;
[  144s]       |             ^~~~
[  144s] dbdimp.c: In function 'sqlite_db_aggr_step_dispatcher':
[  144s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  144s]   162 | #define POPs            (*sp--)
[  144s]       |                         ~^~~~~~
[  144s] dbdimp.c:1885:7: note: in expansion of macro 'POPs'
[  144s]  1885 |       POPs;
[  144s]       |       ^~~~
[  144s] dbdimp.c: In function 'sqlite_db_aggr_finalize_dispatcher':
[  144s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  144s]   162 | #define POPs            (*sp--)
[  144s]       |                         ~^~~~~~
[  144s] dbdimp.c:1926:13: note: in expansion of macro 'POPs'
[  144s]  1926 |             POPs;
[  144s]       |             ^~~~
[  144s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[  144s]   162 | #define POPs            (*sp--)
[  144s]       |                         ~^~~~~~
[  144s] dbdimp.c:1933:17: note: in expansion of macro 'POPs'
[  144s]  1933 |                 POPs;
[  144s]       |                 ^~~~
[  144s] dbdimp.c: In function 'sqlite_db_trace_dispatcher':
[  144s] dbdimp.c:2413:9: warning: variable 'retval' set but not used [-Wunused-but-set-variable]
[  144s]  2413 |     int retval = 0;
[  144s]       |         ^~~~~~
[  144s] dbdimp.c: In function 'sqlite_db_profile_dispatcher':
[  144s] dbdimp.c:2471:9: warning: variable 'retval' set but not used [-Wunused-but-set-variable]
[  144s]  2471 |     int retval = 0;
[  144s]       |         ^~~~~~
[  144s] dbdimp.c: In function 'perl_tokenizer_Next':
[  144s] dbdimp.c:2803:12: warning: unused variable 'n_a' [-Wunused-variable]
[  144s]  2803 |     STRLEN n_a; /* this is required for older perls < 5.8.8 */
[  144s]       |            ^~~
[  144s] dbdimp.c: In function 'sqlite_db_destroy_module_data':
[  144s] dbdimp.c:3664:9: warning: unused variable 'rc' [-Wunused-variable]
[  144s]  3664 |     int rc = SQLITE_ERROR;
[  144s]       |         ^~
[  144s] In file included from SQLiteXS.h:17:
[  144s] dbdimp.h: At top level:
[  144s] dbdimp.h:149:1: warning: 'newUTF8SVpvn' defined but not used [-Wunused-function]
[  144s]   149 | newUTF8SVpvn(char *s, STRLEN len) {
[  144s]       | ^~~~~~~~~~~~
[  144s] dbdimp.h:139:1: warning: 'newUTF8SVpv' defined but not used [-Wunused-function]
[  144s]   139 | newUTF8SVpv(char *s, STRLEN len) {
[  144s]       | ^~~~~~~~~~~
[  144s] cp lib/DBD/SQLite/Fulltext_search.pod blib/lib/DBD/SQLite/Fulltext_search.pod
[  144s] cp lib/DBD/SQLite/VirtualTable.pm blib/lib/DBD/SQLite/VirtualTable.pm
[  144s] cp lib/DBD/SQLite/VirtualTable/PerlData.pm blib/lib/DBD/SQLite/VirtualTable/PerlData.pm
[  144s] cp lib/DBD/SQLite/Cookbook.pod blib/lib/DBD/SQLite/Cookbook.pod
[  144s] cp lib/DBD/SQLite.pm blib/lib/DBD/SQLite.pm
[  144s] cp lib/DBD/SQLite/VirtualTable/FileContent.pm blib/lib/DBD/SQLite/VirtualTable/FileContent.pm
[  144s] cp lib/DBD/SQLite/Constants.pm blib/lib/DBD/SQLite/Constants.pm
[  145s] dbdimp.c: In function 'perl_vt_Eof':
[  145s] dbdimp.c:3378:12: warning: 'eof' may be used uninitialized [-Wmaybe-uninitialized]
[  145s]  3378 |     return eof;
[  145s]       |            ^~~
[  145s] dbdimp.c:3354:16: note: 'eof' was declared here
[  145s]  3354 |     int count, eof;
[  145s]       |                ^~~
[  147s] mv SQLite.xsc SQLite.c
[  147s] cc -c  -I. -I/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g   -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE"  -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 SQLite.c
[  147s] In file included from SQLiteXS.h:11,
[  147s]                  from SQLite.xs:3:
[  147s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined
[  147s]  1059 | #define PERL_USE_SAFE_PUTENV
[  147s]       |         ^~~~~~~~~~~~~~~~~~~~
[  147s] <command-line>: note: this is the location of the previous definition
[  148s] In file included from SQLiteXS.h:12:
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_last_insert_rowid':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:198:5: note: in expansion of macro 'dXSI32'
[  148s]   198 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_create_function':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:223:5: note: in expansion of macro 'dXSI32'
[  148s]   223 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_enable_load_extension':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:264:5: note: in expansion of macro 'dXSI32'
[  148s]   264 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_load_extension':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:290:5: note: in expansion of macro 'dXSI32'
[  148s]   290 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_create_aggregate':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:325:5: note: in expansion of macro 'dXSI32'
[  148s]   325 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_create_collation':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:363:5: note: in expansion of macro 'dXSI32'
[  148s]   363 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_collation_needed':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:391:5: note: in expansion of macro 'dXSI32'
[  148s]   391 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_progress_handler':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:413:5: note: in expansion of macro 'dXSI32'
[  148s]   413 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_profile':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:466:5: note: in expansion of macro 'dXSI32'
[  148s]   466 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_commit_hook':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:492:5: note: in expansion of macro 'dXSI32'
[  148s]   492 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_rollback_hook':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:517:5: note: in expansion of macro 'dXSI32'
[  148s]   517 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_update_hook':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:542:5: note: in expansion of macro 'dXSI32'
[  148s]   542 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_set_authorizer':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:567:5: note: in expansion of macro 'dXSI32'
[  148s]   567 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_busy_timeout':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:593:5: note: in expansion of macro 'dXSI32'
[  148s]   593 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_backup_from_file':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:623:5: note: in expansion of macro 'dXSI32'
[  148s]   623 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_backup_to_file':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:647:5: note: in expansion of macro 'dXSI32'
[  148s]   647 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_table_column_metadata':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:671:5: note: in expansion of macro 'dXSI32'
[  148s]   671 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_db_filename':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:702:5: note: in expansion of macro 'dXSI32'
[  148s]   702 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_register_fts3_perl_tokenizer':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:723:5: note: in expansion of macro 'dXSI32'
[  148s]   723 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_db_status':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:745:5: note: in expansion of macro 'dXSI32'
[  148s]   745 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__db_create_module':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:778:5: note: in expansion of macro 'dXSI32'
[  148s]   778 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite__st_st_status':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[  148s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[  148s]       |                    ^~
[  148s] SQLite.c:806:5: note: in expansion of macro 'dXSI32'
[  148s]   806 |     dXSI32;
[  148s]       |     ^~~~~~
[  148s] SQLite.c: In function 'XS_DBD__SQLite_compile_options':
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:189:28: warning: unused variable 'targ' [-Wunused-variable]
[  148s]   189 | #define dXSTARG SV * const targ = ((PL_op->op_private & OPpENTERSUB_HASTARG) \
[  148s]       |                            ^~~~
[  148s] SQLite.c:843:9: note: in expansion of macro 'dXSTARG'
[  148s]   843 |         dXSTARG;
[  148s]       |         ^~~~~~~
[  148s] SQLite.c:842:17: warning: unused variable 'RETVAL' [-Wunused-variable]
[  148s]   842 |         int     RETVAL;
[  148s]       |                 ^~~~~~
[  148s] ./SQLite.xsi: In function 'XS_DBD__SQLite__db_selectrow_arrayref':
[  148s] ./SQLite.xsi:208:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations]
[  148s]   208 |         if (GIMME == G_SCALAR)
[  148s]       |         ^~
[  148s] In file included from /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/perl.h:6188:
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/proto.h:1019:1: note: declared here
[  148s]  1019 | Perl_dowantarray(pTHX)
[  148s]       | ^~~~~~~~~~~~~~~~
[  148s] ./SQLite.xsi:214:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations]
[  148s]   214 |         if (GIMME == G_SCALAR)
[  148s]       |         ^~
[  148s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/proto.h:1019:1: note: declared here
[  148s]  1019 | Perl_dowantarray(pTHX)
[  148s]       | ^~~~~~~~~~~~~~~~
[  148s] In file included from SQLiteXS.h:17:
[  148s] dbdimp.h: At top level:
[  148s] dbdimp.h:149:1: warning: 'newUTF8SVpvn' defined but not used [-Wunused-function]
[  148s]   149 | newUTF8SVpvn(char *s, STRLEN len) {
[  148s]       | ^~~~~~~~~~~~
[  148s] dbdimp.h:139:1: warning: 'newUTF8SVpv' defined but not used [-Wunused-function]
[  148s]   139 | newUTF8SVpv(char *s, STRLEN len) {
[  148s]       | ^~~~~~~~~~~
[  152s] sqlite3.c: In function 'sqlite3DefaultRowEst':
[  152s] sqlite3.c:97173:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
[  152s] 97173 |   if( a[0]<33 ) a[0] = 33;        assert( 33==sqlite3LogEst(10) );
[  152s]       |   ^~
[  152s] In file included from sqlite3.c:9670:
[  152s] sqlite3.c:97173:35: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if'
[  152s] 97173 |   if( a[0]<33 ) a[0] = 33;        assert( 33==sqlite3LogEst(10) );
[  152s]       |                                   ^~~~~~
[  158s] sqlite3.c: In function 'whereRangeScanEst':
[  158s] sqlite3.c:124048:11: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
[  158s] 124048 |           if( iLwrIdx==iUprIdx ) nNew -= 20;  assert( 20==sqlite3LogEst(4) );
[  158s]        |           ^~
[  158s] sqlite3.c:124048:47: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if'
[  158s] 124048 |           if( iLwrIdx==iUprIdx ) nNew -= 20;  assert( 20==sqlite3LogEst(4) );
[  158s]        |                                               ^~~~~~
[  204s] sqlite3.c: In function 'sqlite3SelectNew':
[  204s] sqlite3.c:109810:10: warning: function may return address of local variable [-Wreturn-local-addr]
[  204s] 109810 |   return pNew;
[  204s]        |          ^~~~
[  204s] sqlite3.c:109778:10: note: declared here
[  204s] 109778 |   Select standin;
[  204s]        |          ^~~~~~~
[  279s] rm -f blib/arch/auto/DBD/SQLite/SQLite.so
[  279s] cc  -shared -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -pipe -L/usr/local/lib -Wl,-Bsymbolic  SQLite.o dbdimp.o sqlite3.o  -o blib/arch/auto/DBD/SQLite/SQLite.so  \
[  279s]       \
[  279s]   
[  279s] chmod 755 blib/arch/auto/DBD/SQLite/SQLite.so
[  284s] Manifying 7 pod documents
[  284s] + exit 0
[  284s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Rb2GpH
[  284s] + umask 022
[  284s] + cd /home/abuild/rpmbuild/BUILD
[  284s] + cd DBD-SQLite-1.50
[  284s] + LANG=C
[  284s] + export LANG
[  284s] + unset DISPLAY
[  284s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64
[  284s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64
[  284s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64 install_vendor
[  286s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644
[  288s] Manifying 7 pod documents
[  289s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite.pm
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/Constants.pm
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite::VirtualTable.3
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite::VirtualTable::PerlData.3
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite.3
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite::Fulltext_search.3
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite::VirtualTable::FileContent.3
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite::Constants.3
[  289s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite::Cookbook.3
[  289s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/perllocal.pod
[  291s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64 -a -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto
[  291s] + xargs -0 -r rm
[  291s] + find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto -name .packlist -print0
[  291s] + '[' aarch64 == noarch ']'
[  291s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/perllocal.pod
[  291s] + FILES=perl-DBD-SQLite.files
[  291s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f
[  291s] + RES=
[  291s] + '[' -n '' ']'
[  291s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/
[  291s] ++ sort
[  291s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ -type d
[  292s] + for dir in '`find ${base_dir} -type d | sort`'
[  292s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  292s] + continue
[  292s] + for dir in '`find ${base_dir} -type d | sort`'
[  292s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  292s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi
[  292s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  292s] + el=aarch64-linux-thread-multi
[  292s] + all_dir=(${all_dir[@]} $el)
[  292s] + for dir in '`find ${base_dir} -type d | sort`'
[  292s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  292s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD
[  292s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  292s] + el=aarch64-linux-thread-multi/DBD
[  292s] + all_dir=(${all_dir[@]} $el)
[  292s] + for dir in '`find ${base_dir} -type d | sort`'
[  292s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  292s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  292s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite
[  292s] + el=aarch64-linux-thread-multi/DBD/SQLite
[  292s] + all_dir=(${all_dir[@]} $el)
[  292s] + for dir in '`find ${base_dir} -type d | sort`'
[  292s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  292s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable
[  292s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  292s] + el=aarch64-linux-thread-multi/DBD/SQLite/VirtualTable
[  292s] + all_dir=(${all_dir[@]} $el)
[  292s] + for dir in '`find ${base_dir} -type d | sort`'
[  292s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  292s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  292s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto
[  292s] + el=aarch64-linux-thread-multi/auto
[  292s] + all_dir=(${all_dir[@]} $el)
[  292s] + for dir in '`find ${base_dir} -type d | sort`'
[  292s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  292s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  292s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD
[  292s] + el=aarch64-linux-thread-multi/auto/DBD
[  292s] + all_dir=(${all_dir[@]} $el)
[  292s] + for dir in '`find ${base_dir} -type d | sort`'
[  292s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  292s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  292s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite
[  292s] + el=aarch64-linux-thread-multi/auto/DBD/SQLite
[  292s] + all_dir=(${all_dir[@]} $el)
[  292s] + for dir in '`find ${base_dir} -type d | sort`'
[  292s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  292s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share
[  292s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  292s] + el=aarch64-linux-thread-multi/auto/share
[  292s] + all_dir=(${all_dir[@]} $el)
[  292s] + for dir in '`find ${base_dir} -type d | sort`'
[  292s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  292s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist
[  292s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  292s] + el=aarch64-linux-thread-multi/auto/share/dist
[  292s] + all_dir=(${all_dir[@]} $el)
[  292s] + for dir in '`find ${base_dir} -type d | sort`'
[  292s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  292s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite
[  292s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  292s] + el=aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite
[  292s] + all_dir=(${all_dir[@]} $el)
[  292s] + for i in '${all_dir[@]}'
[  292s] + '[' aarch64-linux-thread-multi = auto ']'
[  292s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']'
[  292s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi ']'
[  292s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi -maxdepth 1 -type f
[  292s] + RES=
[  292s] + '[' -n '' ']'
[  292s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi
[  292s] + /bin/cat
[  292s] + for i in '${all_dir[@]}'
[  292s] + '[' aarch64-linux-thread-multi/DBD = auto ']'
[  292s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']'
[  292s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD ']'
[  292s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD -maxdepth 1 -type f
[  292s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite.pm
[  292s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite.pm ']'
[  292s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD
[  292s] + /bin/cat
[  292s] + for file in '$RES'
[  292s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite.pm
[  292s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite.pm
[  292s] + /bin/cat
[  292s] + for i in '${all_dir[@]}'
[  292s] + '[' aarch64-linux-thread-multi/DBD/SQLite = auto ']'
[  292s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']'
[  292s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite ']'
[  292s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite -maxdepth 1 -type f
[  292s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  292s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Constants.pm
[  292s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  292s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod'
[  292s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  292s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Constants.pm
[  292s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  292s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod' ']'
[  292s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite
[  292s] + /bin/cat
[  292s] + for file in '$RES'
[  292s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  292s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  292s] + /bin/cat
[  292s] + for file in '$RES'
[  292s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Constants.pm
[  292s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/Constants.pm
[  292s] + /bin/cat
[  292s] + for file in '$RES'
[  292s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  292s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  292s] + /bin/cat
[  292s] + for file in '$RES'
[  292s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod
[  292s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod
[  292s] + /bin/cat
[  293s] + for i in '${all_dir[@]}'
[  293s] + '[' aarch64-linux-thread-multi/DBD/SQLite/VirtualTable = auto ']'
[  293s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']'
[  293s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable ']'
[  293s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable -maxdepth 1 -type f
[  293s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  293s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm'
[  293s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  293s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm' ']'
[  293s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable
[  293s] + /bin/cat
[  293s] + for file in '$RES'
[  293s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  293s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  293s] + /bin/cat
[  293s] + for file in '$RES'
[  293s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm
[  293s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm
[  293s] + /bin/cat
[  293s] + for i in '${all_dir[@]}'
[  293s] + '[' aarch64-linux-thread-multi/auto = auto ']'
[  293s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']'
[  293s] + continue
[  293s] + for i in '${all_dir[@]}'
[  293s] + '[' aarch64-linux-thread-multi/auto/DBD = auto ']'
[  293s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']'
[  293s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD ']'
[  293s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD -maxdepth 1 -type f
[  293s] + RES=
[  293s] + '[' -n '' ']'
[  293s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD
[  293s] + /bin/cat
[  293s] + for i in '${all_dir[@]}'
[  293s] + '[' aarch64-linux-thread-multi/auto/DBD/SQLite = auto ']'
[  293s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']'
[  293s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD/SQLite ']'
[  293s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD/SQLite -maxdepth 1 -type f
[  293s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  293s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD/SQLite/SQLite.so ']'
[  293s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite
[  293s] + /bin/cat
[  293s] + for file in '$RES'
[  293s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  293s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  293s] + /bin/cat
[  293s] + for i in '${all_dir[@]}'
[  293s] + '[' aarch64-linux-thread-multi/auto/share = auto ']'
[  293s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']'
[  293s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share ']'
[  293s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share -maxdepth 1 -type f
[  293s] + RES=
[  293s] + '[' -n '' ']'
[  293s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share
[  293s] + /bin/cat
[  293s] + for i in '${all_dir[@]}'
[  293s] + '[' aarch64-linux-thread-multi/auto/share/dist = auto ']'
[  293s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']'
[  293s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist ']'
[  293s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist -maxdepth 1 -type f
[  293s] + RES=
[  293s] + '[' -n '' ']'
[  293s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist
[  293s] + /bin/cat
[  293s] + for i in '${all_dir[@]}'
[  293s] + '[' aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite = auto ']'
[  293s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']'
[  293s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite ']'
[  293s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite -maxdepth 1 -type f
[  293s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  293s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  293s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h'
[  293s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  293s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  293s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h' ']'
[  293s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite
[  293s] + /bin/cat
[  293s] + for file in '$RES'
[  293s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  293s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  293s] + /bin/cat
[  293s] + for file in '$RES'
[  293s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  293s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  293s] + /bin/cat
[  293s] + for file in '$RES'
[  293s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h
[  293s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h
[  293s] + /bin/cat
[  293s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man ']'
[  293s] + fgen_file '/usr/share/man/man?/*'
[  293s] + /bin/cat
[  293s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/var/adm/perl-modules/perl-DBD-SQLite ']'
[  293s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/bin ']'
[  293s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.50-1.1 --unique-debug-src-base perl-DBD-SQLite-1.50-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50
[  294s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  295s] 14208 blocks
[  295s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/perl-DBD-SQLite-debuginfo.manifest
[  295s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/perl-DBD-SQLite-debugsource.manifest
[  295s] + /usr/lib/rpm/check-buildroot
[  295s] + /usr/lib/rpm//brp-compress
[  296s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip
[  296s] + /usr/lib/rpm/brp-python-hardlink
[  297s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64
[  297s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/isu.list
[  297s] ~/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64 ~/rpmbuild/BUILD/DBD-SQLite-1.50
[  297s] ~/rpmbuild/BUILD/DBD-SQLite-1.50
[  297s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES
[  317s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.p478bg
[  317s] + umask 022
[  317s] + cd /home/abuild/rpmbuild/BUILD
[  317s] + cd DBD-SQLite-1.50
[  317s] + /bin/make test
[  319s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644
[  320s] PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/**/*.t
[  325s] # $DBI::VERSION=1.628
[  325s] # Compile Options:
[  325s] #   ENABLE_COLUMN_METADATA
[  325s] #   ENABLE_FTS3
[  325s] #   ENABLE_FTS3_PARENTHESIS
[  325s] #   ENABLE_FTS4
[  325s] #   ENABLE_JSON1
[  325s] #   ENABLE_RTREE
[  325s] #   ENABLE_STAT4
[  325s] #   SYSTEM_MALLOC
[  325s] #   THREADSAFE=1
[  325s] t/01_compile.t ........................................ ok
[  326s] # sqlite_version=3.10.2
[  327s] t/02_logon.t .......................................... ok
[  329s] t/03_create_table.t ................................... ok
[  331s] t/04_insert.t ......................................... ok
[  333s] t/05_select.t ......................................... ok
[  336s] t/06_tran.t ........................................... ok
[  338s] t/07_error.t .......................................... ok
[  347s] t/08_busy.t ........................................... ok
[  350s] t/09_create_function.t ................................ ok
[  353s] t/10_create_aggregate.t ............................... ok
[  355s] t/12_unicode.t ........................................ ok
[  357s] t/13_create_collation.t ............................... ok
[  359s] t/14_progress_handler.t ............................... ok
[  360s] t/15_ak_dbd.t ......................................... ok
[  362s] t/16_column_info.t .................................... ok
[  364s] t/17_createdrop.t ..................................... ok
[  366s] t/18_insertfetch.t .................................... ok
[  368s] t/19_bindparam.t ...................................... ok
[  370s] t/20_blobs.t .......................................... ok
[  372s] t/21_blobtext.t ....................................... ok
[  374s] t/22_listfields.t ..................................... ok
[  376s] t/23_nulls.t .......................................... ok
[  379s] t/24_numrows.t ........................................ ok
[  381s] t/25_chopblanks.t ..................................... ok
[  384s] t/26_commit.t ......................................... ok
[  386s] t/27_metadata.t ....................................... ok
[  389s] t/28_schemachange.t ................................... ok
[  391s] t/30_auto_rollback.t .................................. ok
[  393s] t/31_bind_weird_number_param.t ........................ ok
[  395s] t/32_inactive_error.t ................................. ok
[  397s] t/33_non_latin_path.t ................................. ok
[  400s] t/34_online_backup.t .................................. ok
[  401s] t/35_table_info.t ..................................... ok
[  404s] t/36_hooks.t .......................................... ok
[  406s] t/37_regexp.t ......................................... ok
[  407s] t/38_empty_statement.t ................................ ok
[  409s] t/39_foreign_keys.t ................................... ok
[  412s] t/40_multiple_statements.t ............................ ok
[  414s] t/41_placeholders.t ................................... ok
[  416s] t/42_primary_key_info.t ............................... ok
[  418s] t/43_fts3.t ........................................... ok
[  420s] t/44_rtree.t .......................................... ok
[  423s] t/45_savepoints.t ..................................... ok
[  424s] t/46_mod_perl.t ....................................... skipped: requires APR::Table
[  427s] t/47_execute.t ........................................ ok
[  429s] t/48_bind_param_is_sticky.t ........................... ok
[  431s] t/49_trace_and_profile.t .............................. ok
[  433s] t/50_foreign_key_info.t ............................... ok
[  436s] t/51_table_column_metadata.t .......................... ok
[  438s] t/52_db_filename.t .................................... ok
[  440s] t/53_status.t ......................................... ok
[  442s] t/54_literal_txn.t .................................... ok
[  444s] t/55_statistics_info.t ................................ ok
[  446s] t/56_open_flags.t ..................................... ok
[  448s] t/57_uri_filename.t ................................... ok
[  450s] t/58_see_if_its_a_number_and_explicit_binding.t ....... ok
[  452s] t/59_extended_result_codes.t .......................... skipped: this test is for Win32 only
[  454s] t/60_readonly.t ....................................... ok
[  456s] t/61_strlike.t ........................................ ok
[  458s] t/cookbook_variance.t ................................. ok
[  460s] t/rt_106151_outermost_savepoint.t ..................... ok
[  461s] t/rt_106950_extra_warnings_with_savepoints.t .......... ok
[  463s] t/rt_15186_prepcached.t ............................... ok
[  465s] t/rt_21406_auto_finish.t .............................. ok
[  467s] t/rt_25371_asymmetric_unicode.t ....................... ok
[  468s] t/rt_25460_numeric_aggregate.t ........................ ok
[  470s] t/rt_25924_user_defined_func_unicode.t ................ ok
[  471s] t/rt_26775_distinct.t ................................. ok
[  473s] t/rt_27553_prepared_cache_and_analyze.t ............... ok
[  474s] t/rt_29058_group_by.t ................................. ok
[  477s] t/rt_29629_sqlite_where_length.t ...................... ok
[  479s] t/rt_31324_full_names.t ............................... ok
[  481s] t/rt_32889_prepare_cached_reexecute.t ................. ok
[  482s] t/rt_36836_duplicate_key.t ............................ ok
[  484s] t/rt_36838_unique_and_bus_error.t ..................... ok
[  485s] t/rt_40594_nullable.t ................................. ok
[  486s] t/rt_48393_debug_panic_with_commit.t .................. skipped: set $ENV{TEST_DBD_SQLITE_WITH_DEBUGGER} to enable this test
[  488s] t/rt_50503_fts3.t ..................................... ok
[  490s] t/rt_52573_manual_exclusive_lock.t .................... ok
[  492s] t/rt_53235_icu_compatibility.t ........................ skipped: requires SQLite ICU plugin to be enabled
[  494s] t/rt_62370_diconnected_handles_operation.t ............ ok
[  495s] t/rt_64177_ping_wipes_out_the_errstr.t ................ ok
[  497s] t/rt_67581_bind_params_mismatch.t ..................... ok
[  499s] t/rt_71311_bind_col_and_unicode.t ..................... ok
[  500s] t/rt_73159_fts_tokenizer_segfault.t ................... ok
[  501s] t/rt_73787_exponential_buffer_overflow.t .............. ok
[  506s] t/rt_76395_int_overflow.t ............................. ok
[  507s] t/rt_77724_primary_key_with_a_whitespace.t ............ ok
[  510s] t/rt_78833_utf8_flag_for_column_names.t ............... ok
[  512s] t/rt_81536_multi_column_primary_key_info.t ............ ok
[  514s] t/rt_88228_sqlite_3_8_0_crash.t ....................... ok
[  515s] t/rt_96050_db_filename_for_a_closed_database.t ........ ok
[  517s] t/rt_96877_unicode_statements.t ....................... ok
[  518s] t/rt_96878_fts_contentless_table.t .................... ok
[  520s] t/rt_97598_crash_on_disconnect_with_virtual_tables.t .. ok
[  522s] t/virtual_table/00_base.t ............................. ok
[  524s] t/virtual_table/01_destroy.t .......................... ok
[  526s] t/virtual_table/02_find_function.t .................... ok
[  527s] t/virtual_table/10_filecontent.t ...................... ok
[  529s] t/virtual_table/11_filecontent_fulltext.t ............. ok
[  532s] t/virtual_table/20_perldata.t ......................... ok
[  536s] t/virtual_table/21_perldata_charinfo.t ................ ok
[  538s] t/virtual_table/rt_99748.t ............................ ok
[  538s] All tests successful.
[  538s] Files=103, Tests=3561, 216 wallclock secs ( 3.75 usr  0.21 sys + 108.56 cusr  2.98 csys = 115.50 CPU)
[  538s] Result: PASS
[  538s] + exit 0
[  538s] Processing files: perl-DBD-SQLite-1.50-1.1.aarch64
[  538s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.SrXvmY
[  538s] + umask 022
[  538s] + cd /home/abuild/rpmbuild/BUILD
[  538s] + cd DBD-SQLite-1.50
[  538s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/doc/packages/perl-DBD-SQLite
[  538s] + export LC_ALL=C
[  538s] + LC_ALL=C
[  538s] + export DOCDIR
[  538s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/doc/packages/perl-DBD-SQLite
[  538s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/doc/packages/perl-DBD-SQLite
[  538s] + cp -pr constants.inc /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/doc/packages/perl-DBD-SQLite
[  538s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/doc/packages/perl-DBD-SQLite
[  538s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/doc/packages/perl-DBD-SQLite
[  538s] + exit 0
[  540s] Provides: perl(DBD::SQLite) = 1.50 perl(DBD::SQLite::Constants) perl(DBD::SQLite::VirtualTable) = 1.50 perl(DBD::SQLite::VirtualTable::Cursor) perl(DBD::SQLite::VirtualTable::FileContent) perl(DBD::SQLite::VirtualTable::FileContent::Cursor) perl(DBD::SQLite::VirtualTable::PerlData) perl(DBD::SQLite::VirtualTable::PerlData::Cursor) perl-DBD-SQLite = 1.50-1.1 perl-DBD-SQLite(aarch-64) = 1.50-1.1
[  540s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[  540s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.28)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.34)(64bit)
[  540s] Processing files: perl-DBD-SQLite-debugsource-1.50-1.1.aarch64
[  540s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[  540s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[  540s] 
[  540s] Provides: perl-DBD-SQLite-debugsource = 1.50-1.1 perl-DBD-SQLite-debugsource(aarch-64) = 1.50-1.1
[  540s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[  540s] Processing files: perl-DBD-SQLite-debuginfo-1.50-1.1.aarch64
[  540s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[  540s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[  540s] 
[  540s] Provides: perl-DBD-SQLite-debuginfo = 1.50-1.1 perl-DBD-SQLite-debuginfo(aarch-64) = 1.50-1.1
[  540s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[  540s] Recommends: perl-DBD-SQLite-debugsource(aarch-64) = 1.50-1.1
[  540s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64
[  541s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-DBD-SQLite-1.50-1.1.src.rpm
[  551s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-DBD-SQLite-1.50-1.1.aarch64.rpm
[  559s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-DBD-SQLite-debugsource-1.50-1.1.aarch64.rpm
[  563s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-DBD-SQLite-debuginfo-1.50-1.1.aarch64.rpm
[  563s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.SJ53Cj
[  563s] + umask 022
[  563s] + cd /home/abuild/rpmbuild/BUILD
[  563s] + cd DBD-SQLite-1.50
[  563s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64
[  563s] + exit 0
[  564s] ... checking for files with abuild user/group
[  564s] ... creating baselibs
[  566s] 
[  566s] 8aea0a10cbff finished "build perl-DBD-SQLite.spec" at Fri Nov 29 16:37:04 UTC 2024.
[  566s] 

Retried build at Sat Nov 30 02:37:11 2024 returned same result, skipped

Retried build at Mon Dec  2 16:45:11 2024 returned same result, skipped

Retried build at Tue Dec 10 08:45:51 2024 returned same result, skipped