[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] d35c6af4d0bb started "build python3-editables.spec" at Tue Dec 10 07:18:43 UTC 2024. [ 0s] [ 0s] Building python3-editables for project 'Tizen-Base' repository 'standard' arch 'armv7hl' srcmd5 '31cd546ddb530bf965429438ef9c0673' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build-srcdir/python3-editables.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build-srcdir/python3-editables.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/11/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build-srcdir/python3-editables.spec build ... [ 1s] registering binfmt handlers for cross build [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] [1/42] preinstalling libmagic-data... [ 5s] [2/42] preinstalling libncurses... [ 5s] [3/42] preinstalling setup... [ 5s] [4/42] preinstalling filesystem... [ 6s] [5/42] preinstalling glibc... [ 6s] [6/42] preinstalling libgcc... [ 6s] [7/42] preinstalling bash... [ 6s] [8/42] preinstalling diffutils... [ 7s] [9/42] preinstalling grep... [ 7s] [10/42] preinstalling libattr... [ 7s] [11/42] preinstalling libblkid... [ 7s] [12/42] preinstalling libbz2... [ 7s] [13/42] preinstalling libcap... [ 8s] [14/42] preinstalling libfreebl3... [ 8s] [15/42] preinstalling liblua... [ 8s] [16/42] preinstalling liblzma... [ 8s] [17/42] preinstalling libpopt... [ 8s] [18/42] preinstalling libreadline... [ 8s] [19/42] preinstalling libsmack... [ 9s] [20/42] preinstalling libsqlite... [ 9s] [21/42] preinstalling libuuid... [ 9s] [22/42] preinstalling libxcrypt... [ 9s] [23/42] preinstalling libzstd1... [ 10s] [24/42] preinstalling nspr... [ 10s] [25/42] preinstalling sed... [ 10s] [26/42] preinstalling zlib... [ 10s] [27/42] preinstalling qemu-accel-x86_64-armv7hl... [ 25s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 30s] [29/42] preinstalling coreutils... [ 30s] [30/42] preinstalling libacl... [ 30s] [31/42] preinstalling libelf... [ 31s] [32/42] preinstalling libmount... [ 31s] [33/42] preinstalling smack... [ 31s] [34/42] preinstalling bzip2... [ 31s] [35/42] preinstalling libmagic... [ 31s] [36/42] preinstalling libxml2... [ 32s] [37/42] preinstalling tar... [ 32s] [38/42] preinstalling util-linux... [ 32s] [39/42] preinstalling util-linux-su... [ 32s] [40/42] preinstalling nss... [ 32s] [41/42] preinstalling libsoftokn3... [ 33s] [42/42] preinstalling rpm... [ 34s] running qemu-linux-user-x86_64-cross postinstall script [ 35s] running qemu-accel-x86_64-armv7hl postinstall script [ 35s] mv: cannot stat `/usr/lib/gcc/armv7hl-tizen-linux-gnueabihf/14.1.0/liblto_plugin.so': No such file or directory [ 35s] running setup postinstall script [ 35s] chroot: failed to run command '': No such file or directory [ 35s] initializing rpm db... [ 36s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 36s] breaking dependency libxcrypt-devel -> glibc-devel [ 36s] cycle: libsoftokn3 -> nss [ 36s] breaking dependency nss -> libsoftokn3 [ 36s] done [ 36s] querying package ids... [ 39s] [1/113] cumulate libmagic-data-5.45-1.6 [ 39s] [2/113] cumulate python3-flit_core-3.9.0-1.1 [ 39s] [3/113] cumulate python3-pyparsing-3.1.1-1.1 [ 39s] [4/113] cumulate python3-pyproject_hooks-1.0.0-1.1 [ 39s] [5/113] cumulate python3-six-1.16.0-1.1 [ 39s] [6/113] cumulate python3-typing_extensions-4.9.0-1.1 [ 39s] [7/113] cumulate setup-0.9-1.3 [ 39s] [8/113] cumulate filesystem-3.1-1.1 [ 39s] [9/113] cumulate python3-packaging-23.2-1.1 [ 39s] [10/113] cumulate glibc-2.39-2.1 [ 39s] [11/113] cumulate libatomic-14.1.0-2.3 [ 39s] [12/113] cumulate libgcc-14.1.0-2.3 [ 39s] [13/113] cumulate bash-3.2.57-1.1 [ 39s] [14/113] cumulate cpio-2.8-1.1 [ 39s] [15/113] cumulate diffutils-3.10-1.1 [ 39s] [16/113] cumulate findutils-4.3.8-1.6 [ 39s] [17/113] cumulate gdbm-1.8.3-1.11 [ 39s] [18/113] cumulate hostname-3.23-1.1 [ 39s] [19/113] cumulate libattr-2.5.1-1.6 [ 39s] [20/113] cumulate libblkid-2.39.3-1.6 [ 39s] [21/113] cumulate libbz2-1.0.8-1.7 [ 39s] [22/113] cumulate libcap-2.69-1.8 [ 39s] [23/113] cumulate libexpat-2.6.2-1.10 [ 39s] [24/113] cumulate libffi-3.4.2-1.8 [ 39s] [25/113] cumulate libfreebl3-3.98-1.11 [ 39s] [26/113] cumulate libgfortran-14.1.0-2.3 [ 39s] [27/113] cumulate libgomp-14.1.0-2.3 [ 39s] [28/113] cumulate libitm-14.1.0-2.3 [ 39s] [29/113] cumulate libltdl-2.4.7-1.11 [ 39s] [30/113] cumulate liblua-5.1.5-1.6 [ 39s] [31/113] cumulate liblzma-5.4.5-1.11 [ 39s] [32/113] cumulate libopenssl3-3.0.13-1.11 [ 39s] [33/113] cumulate libpcre-8.45-1.6 [ 39s] [34/113] cumulate libpopt-1.16-1.6 [ 39s] [35/113] cumulate libpython3_121_0-3.12.0-1.10 [ 39s] [36/113] cumulate libsmack-1.3.1-1.6 [ 39s] [37/113] cumulate libsmartcols-2.39.3-1.6 [ 39s] [38/113] cumulate libsqlite-3.44.0-2.3 [ 39s] [39/113] cumulate libstdc++-14.1.0-2.3 [ 39s] [40/113] cumulate libuuid-2.39.3-1.6 [ 39s] [41/113] cumulate libxcrypt-4.4.36-1.10 [ 39s] [42/113] cumulate libzstd1-1.5.5-1.8 [ 39s] [43/113] cumulate m4-1.4.19-1.1 [ 39s] [44/113] cumulate net-tools-2.0_20121208git-1.6 [ 39s] [45/113] cumulate nspr-4.35-1.6 [ 39s] [46/113] cumulate patch-2.7.6-1.6 [ 39s] [47/113] cumulate pkg-config-0.29.2-1.7 [ 39s] [48/113] cumulate sed-4.1c-1.6 [ 39s] [49/113] cumulate update-alternatives-1.22.2-1.1 [ 39s] [50/113] cumulate which-2.17-1.1 [ 39s] [51/113] cumulate zlib-1.3-1.8 [ 39s] [52/113] cumulate build-compare-2023.06.18-1.3 [ 39s] [53/113] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 39s] [54/113] cumulate libstdc++-devel-14.1.0-2.3 [ 39s] [55/113] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.4 [ 39s] [56/113] cumulate cpp-14.1.0-2.3 [ 39s] [57/113] cumulate gcc-c++-14.1.0-2.3 [ 39s] [58/113] cumulate binutils-libs-2.43-1.11 [ 39s] [59/113] cumulate coreutils-6.9-14.3 [ 39s] [60/113] cumulate gawk-3.1.5-1.1 [ 39s] [61/113] cumulate grep-2.5.2-1.6 [ 39s] [62/113] cumulate libacl-2.3.2-1.6 [ 39s] [63/113] cumulate libcc1-14.1.0-2.3 [ 39s] [64/113] cumulate libelf-0.189-1.11 [ 39s] [65/113] cumulate libmount-2.39.3-1.6 [ 39s] [66/113] cumulate libubsan-14.1.0-2.3 [ 39s] [67/113] cumulate make-4.4-1.6 [ 39s] [68/113] cumulate nss-certs-3.98-1.11 [ 39s] [69/113] cumulate smack-1.3.1-1.6 [ 39s] [70/113] cumulate bzip2-1.0.8-1.7 [ 39s] [71/113] cumulate libfdisk-2.39.3-1.6 [ 39s] [72/113] cumulate libmagic-5.45-1.6 [ 39s] [73/113] cumulate libxml2-2.12.5-1.7 [ 39s] [74/113] cumulate xz-5.4.5-1.11 [ 39s] [75/113] cumulate perl-5.38.0-1.7 [ 39s] [76/113] cumulate build-mkbaselibs-20120927-1.1 [ 39s] [77/113] cumulate linux-glibc-devel-6.6-1.11 [ 39s] [78/113] cumulate terminfo-base-full-6.4-1.11 [ 39s] [79/113] cumulate autoconf-2.71-1.11 [ 39s] [80/113] cumulate file-5.45-1.6 [ 39s] [81/113] cumulate glibc-locale-2.39-2.1 [ 39s] [82/113] cumulate tar-1.17-1.1 [ 39s] [83/113] cumulate binutils-2.43-1.11 [ 39s] [84/113] cumulate gzip-1.3.12-1.6 [ 39s] [85/113] cumulate pam-1.1.6-1.8 [ 39s] [86/113] cumulate tzdata-2023c-1.1 [ 39s] [87/113] cumulate libdw-0.189-1.11 [ 39s] [88/113] cumulate libarchive-3.7.2-1.10 [ 39s] [89/113] cumulate gcc-14.1.0-2.3 [ 39s] [90/113] cumulate qemu-accel-x86_64-armv7hl-0.4-3.2 [ 39s] [91/113] cumulate automake-1.16.5-1.10 [ 39s] [92/113] cumulate libasm-0.189-1.11 [ 39s] [93/113] cumulate libncurses6-6.4-1.11 [ 39s] [94/113] cumulate build-20120927-1.1 [ 39s] [95/113] cumulate libncurses-6.4-1.11 [ 39s] [96/113] cumulate less-643-1.1 [ 39s] [97/113] cumulate libreadline-5.2-1.7 [ 39s] [98/113] cumulate libtool-2.4.7-1.11 [ 39s] [99/113] cumulate elfutils-0.189-1.11 [ 39s] [100/113] cumulate python3-base-3.12.0-1.10 [ 39s] [101/113] cumulate util-linux-2.39.3-1.6 [ 39s] [102/113] cumulate python3-3.12.0-1.1 [ 39s] [103/113] cumulate python3-build-1.0.3-1.1 [ 39s] [104/113] cumulate util-linux-su-2.39.3-1.6 [ 39s] [105/113] cumulate python3-devel-3.12.0-1.10 [ 39s] [106/113] cumulate python3-setuptools-69.0.2-1.4 [ 39s] [107/113] cumulate python3-pip-23.3.1-1.1 [ 39s] [108/113] cumulate libxcrypt-devel-4.4.36-1.10 [ 39s] [109/113] cumulate nss-3.98-1.11 [ 39s] [110/113] cumulate glibc-devel-2.39-2.1 [ 39s] [111/113] cumulate libsoftokn3-3.98-1.11 [ 39s] [112/113] cumulate rpm-4.14.1.1-1.11 [ 39s] [113/113] cumulate rpm-build-4.14.1.1-1.11 [ 39s] now installing cumulated packages [ 41s] Preparing... ######################################## [ 41s] Updating / installing... [ 41s] setup-0.9-1.3 ######################################## [ 41s] filesystem-3.1-1.1 ######################################## [ 41s] python3-typing_extensions-4.9.0-1.1 ######################################## [ 42s] python3-six-1.16.0-1.1 ######################################## [ 42s] python3-pyproject_hooks-1.0.0-1.1 ######################################## [ 42s] python3-pyparsing-3.1.1-1.1 ######################################## [ 42s] python3-packaging-23.2-1.1 ######################################## [ 42s] libmagic-data-5.45-1.6 ######################################## [ 42s] python3-flit_core-3.9.0-1.1 ######################################## [ 42s] glibc-2.39-2.1 ######################################## [ 43s] libgcc-14.1.0-2.3 ######################################## [ 43s] bash-3.2.57-1.1 ######################################## [ 43s] zlib-1.3-1.8 ######################################## [ 44s] coreutils-6.9-14.3 ######################################## [ 44s] libbz2-1.0.8-1.7 ######################################## [ 44s] liblzma-5.4.5-1.11 ######################################## [ 45s] libstdc++-14.1.0-2.3 ######################################## [ 45s] libelf-0.189-1.11 ######################################## [ 45s] libxcrypt-4.4.36-1.10 ######################################## [ 45s] libdw-0.189-1.11 ######################################## [ 46s] libmagic-5.45-1.6 ######################################## [ 46s] libblkid-2.39.3-1.6 ######################################## [ 46s] nspr-4.35-1.6 ######################################## [ 47s] pam-1.1.6-1.8 ######################################## [ 47s] gdbm-1.8.3-1.11 ######################################## [ 52s] perl-5.38.0-1.7 ######################################## [ 52s] libcap-2.69-1.8 ######################################## [ 52s] libfreebl3-3.98-1.11 ######################################## [ 52s] liblua-5.1.5-1.6 ######################################## [ 53s] libopenssl3-3.0.13-1.11 ######################################## [ 53s] libpopt-1.16-1.6 ######################################## [ 54s] libpython3_121_0-3.12.0-1.10 ######################################## [ 54s] libsqlite-3.44.0-2.3 ######################################## [ 55s] libuuid-2.39.3-1.6 ######################################## [ 55s] libzstd1-1.5.5-1.8 ######################################## [ 55s] pkg-config-0.29.2-1.7 ######################################## [ 55s] build-mkbaselibs-20120927-1.1 ######################################## [ 56s] linux-glibc-devel-6.6-1.11 ######################################## [ 56s] terminfo-base-full-6.4-1.11 ######################################## [ 56s] libncurses6-6.4-1.11 ######################################## [ 56s] libreadline-5.2-1.7 ######################################## [ 57s] libfdisk-2.39.3-1.6 ######################################## [ 57s] nss-certs-3.98-1.11 ######################################## [ 57s] libsoftokn3-3.98-1.11 ######################################## [ 58s] nss-3.98-1.11 ######################################## [ 58s] libmount-2.39.3-1.6 ######################################## [ 58s] libasm-0.189-1.11 ######################################## [ 58s] libcc1-14.1.0-2.3 ######################################## [ 59s] libubsan-14.1.0-2.3 ######################################## [ 59s] libxml2-2.12.5-1.7 ######################################## [ 60s] xz-5.4.5-1.11 ######################################## [ 60s] bzip2-1.0.8-1.7 ######################################## [ 60s] gzip-1.3.12-1.6 ######################################## [ 60s] binutils-libs-2.43-1.11 ######################################## [ 61s] binutils-2.43-1.11 ######################################## [ 61s] make-4.4-1.6 ######################################## [ 61s] findutils-4.3.8-1.6 ######################################## [ 61s] libattr-2.5.1-1.6 ######################################## [ 62s] libacl-2.3.2-1.6 ######################################## [ 62s] tar-1.17-1.1 ######################################## [ 62s] libarchive-3.7.2-1.10 ######################################## [ 63s] rpm-4.14.1.1-1.11 ######################################## [ 63s] libexpat-2.6.2-1.10 ######################################## [ 64s] libffi-3.4.2-1.8 ######################################## [ 66s] python3-base-3.12.0-1.10 ######################################## [ 66s] python3-3.12.0-1.1 ######################################## [ 67s] python3-setuptools-69.0.2-1.4 ######################################## [ 67s] libgfortran-14.1.0-2.3 ######################################## [ 67s] libgomp-14.1.0-2.3 ######################################## [ 68s] libitm-14.1.0-2.3 ######################################## [ 68s] libltdl-2.4.7-1.11 ######################################## [ 68s] libpcre-8.45-1.6 ######################################## [ 69s] libsmack-1.3.1-1.6 ######################################## [ 69s] libsmartcols-2.39.3-1.6 ######################################## [ 69s] m4-1.4.19-1.1 ######################################## [ 69s] autoconf-2.71-1.11 ######################################## [ 70s] automake-1.16.5-1.10 ######################################## [ 70s] patch-2.7.6-1.6 ######################################## [ 70s] sed-4.1c-1.6 ######################################## [ 70s] util-linux-2.39.3-1.6 ######################################## [ 70s] libatomic-14.1.0-2.3 ######################################## [ 71s] libtool-2.4.7-1.11 ######################################## [ 71s] python3-pip-23.3.1-1.1 ######################################## [ 71s] python3-build-1.0.3-1.1 ######################################## [ 71s] build-20120927-1.1 ######################################## [ 71s] libncurses-6.4-1.11 ######################################## [ 72s] libstdc++-devel-14.1.0-2.3 ######################################## [ 72s] build-compare-2023.06.18-1.3 ######################################## [ 72s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 78s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 83s] gcc-14.1.0-2.3 ######################################## [ 83s] libxcrypt-devel-4.4.36-1.10 ######################################## [ 83s] glibc-devel-2.39-2.1 ######################################## [ 99s] qemu-accel-x86_64-armv7hl-0.4-3.2 ######################################## [ 100s] rpm-build-4.14.1.1-1.11 ######################################## [ 100s] util-linux-su-2.39.3-1.6 ######################################## [ 100s] smack-1.3.1-1.6 ######################################## [ 100s] grep-2.5.2-1.6 ######################################## [ 100s] python3-devel-3.12.0-1.10 ######################################## [ 100s] elfutils-0.189-1.11 ######################################## [ 100s] less-643-1.1 ######################################## [ 100s] file-5.45-1.6 ######################################## [ 101s] glibc-locale-2.39-2.1 ######################################## [ 101s] tzdata-2023c-1.1 ######################################## [ 104s] cpp-14.1.0-2.3 ######################################## [ 106s] gcc-c++-14.1.0-2.3 ######################################## [ 106s] gawk-3.1.5-1.1 ######################################## [ 106s] cpio-2.8-1.1 ######################################## [ 106s] diffutils-3.10-1.1 ######################################## [ 106s] hostname-3.23-1.1 ######################################## [ 106s] net-tools-2.0_20121208git-1.6 ######################################## [ 106s] update-alternatives-1.22.2-1.1 ######################################## [ 106s] which-2.17-1.1 ######################################## [ 108s] now finalizing build dir... [ 111s] ----------------------------------------------------------------- [ 111s] I have the following modifications for python3-editables.spec: [ 111s] 4c4 [ 111s] < Release: 0 [ 111s] --- [ 111s] > Release: 1.4 [ 112s] build target is armv7hl-tizen-linux [ 112s] ----------------------------------------------------------------- [ 112s] ----- building python3-editables.spec (user abuild) [ 112s] ----------------------------------------------------------------- [ 112s] ----------------------------------------------------------------- [ 113s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/31cd546ddb530bf965429438ef9c0673-python3-editables' /home/abuild/rpmbuild/SOURCES/python3-editables.spec [ 113s] Building target platforms: armv7hl-tizen-linux [ 113s] Building for target armv7hl-tizen-linux [ 113s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.wviILZ [ 113s] + umask 022 [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + rm -rf editables-0.5 [ 113s] + /bin/tar -xof - [ 113s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/editables-0.5.tar.gz [ 113s] + STATUS=0 [ 113s] + '[' 0 -ne 0 ']' [ 113s] + cd editables-0.5 [ 113s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 113s] + exit 0 [ 113s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.GYqerv [ 113s] + umask 022 [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + cd editables-0.5 [ 113s] + ref=/usr/lib/rpm [ 113s] + mints=0 [ 113s] + case $(uname -m) in [ 113s] ++ uname -m [ 113s] + for s in guess sub [ 113s] ++ find -maxdepth 8 -name config.guess [ 114s] + for s in guess sub [ 114s] ++ find -maxdepth 8 -name config.sub [ 114s] + LANG=C [ 114s] + export LANG [ 114s] + unset DISPLAY [ 114s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 114s] + export CFLAGS [ 114s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 114s] + export CXXFLAGS [ 114s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 114s] + export FFLAGS [ 114s] + LDFLAGS= [ 114s] + export LDFLAGS [ 114s] + cp /home/abuild/rpmbuild/SOURCES/python3-editables.manifest . [ 114s] + /usr/bin/python3 -m build -n [ 117s] * Getting build dependencies for sdist... [ 123s] * Building sdist... [ 126s] * Building wheel from sdist [ 126s] * Getting build dependencies for wheel... [ 130s] * Building wheel... [ 134s] Successfully built editables-0.5.tar.gz and editables-0.5-py3-none-any.whl [ 135s] + exit 0 [ 135s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.9aAkW5 [ 135s] + umask 022 [ 135s] + cd /home/abuild/rpmbuild/BUILD [ 135s] + cd editables-0.5 [ 135s] + LANG=C [ 135s] + export LANG [ 135s] + unset DISPLAY [ 135s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.4.arm [ 135s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.4.arm [ 135s] + /usr/bin/python3 -m pip install --root /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.4.arm ./dist/editables-0.5-py3-none-any.whl [ 144s] Processing ./dist/editables-0.5-py3-none-any.whl [ 148s] Installing collected packages: editables [ 149s] Successfully installed editables-0.5 [ 151s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.5-1.4 --unique-debug-src-base python3-editables-0.5-1.4.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/editables-0.5 [ 152s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/editables-0.5/python3-editables-debuginfo.manifest [ 152s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/editables-0.5/python3-editables-debugsource.manifest [ 152s] + /usr/lib/rpm/check-buildroot [ 152s] + /usr/lib/rpm//brp-compress [ 152s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 153s] + /usr/lib/rpm/brp-python-hardlink [ 154s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.4.arm [ 154s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/editables-0.5/isu.list [ 154s] ~/rpmbuild/BUILDROOT/python3-editables-0.5-1.4.arm ~/rpmbuild/BUILD/editables-0.5 [ 154s] ~/rpmbuild/BUILD/editables-0.5 [ 154s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 163s] Processing files: python3-editables-0.5-1.4.noarch [ 163s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 163s] IiAvPgogICAgPC9yZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 163s] [ 163s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.IDGbDC [ 163s] + umask 022 [ 163s] + cd /home/abuild/rpmbuild/BUILD [ 163s] + cd editables-0.5 [ 163s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.4.arm/usr/share/licenses/python3-editables [ 163s] + export LC_ALL=C [ 163s] + LC_ALL=C [ 163s] + export LICENSEDIR [ 163s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.4.arm/usr/share/licenses/python3-editables [ 163s] + cp -pr LICENSE.txt /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.4.arm/usr/share/licenses/python3-editables [ 163s] + exit 0 [ 164s] Provides: python3-editables = 0.5-1.4 [ 164s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 164s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.4.arm [ 165s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-editables-0.5-1.4.src.rpm [ 165s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-editables-0.5-1.4.noarch.rpm [ 165s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.LbtkM0 [ 166s] + umask 022 [ 166s] + cd /home/abuild/rpmbuild/BUILD [ 166s] + cd editables-0.5 [ 166s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.4.arm [ 166s] + exit 0 [ 166s] ... checking for files with abuild user/group [ 166s] ... creating baselibs [ 169s] ... comparing built packages with the former built [ 169s] /usr/lib/build/pkg-diff.sh [ 170s] compare /.build.oldpackages/python3-editables-0.5-1.3.src.rpm /home/abuild/rpmbuild/SRPMS/python3-editables-0.5-1.4.src.rpm [ 171s] This is not a prerelease project. Compare the project name. [ 171s] comparing disturl_distribution [ 172s] comparing the rpm tags of python3-editables [ 172s] --- old-rpm-tags [ 172s] +++ new-rpm-tags [ 172s] @@ -87 +87 @@ [ 172s] -python3-editables.spec 412d4de1546734a59535db6a7b1c1e0a913ca8eb188c63ba869fddf03dce00b5 32 [ 172s] +python3-editables.spec 9abc04eee03889c8eb361dd08ed04908d24a39f1f7e9e42f4863bfe03b502306 32 [ 172s] comparing rpmtags [ 172s] comparing RELEASE [ 172s] comparing PROVIDES [ 172s] comparing scripts [ 173s] comparing filelist [ 173s] comparing file checksum [ 174s] compare /.build.oldpackages/python3-editables-0.5-1.3.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/python3-editables-0.5-1.4.noarch.rpm [ 175s] Comparing python3-editables-0.5-1.3.noarch.rpm to python3-editables-0.5-1.4.noarch.rpm [ 176s] This is not a prerelease project. Compare the project name. [ 176s] comparing disturl_distribution [ 177s] comparing the rpm tags of python3-editables [ 177s] --- old-rpm-tags [ 177s] +++ new-rpm-tags [ 177s] @@ -103,2 +103,2 @@ [ 177s] -/usr/lib/python3.12/site-packages/editables/__pycache__/__init__.cpython-312.pyc efad138807e71edcbb73830834d2febc24e0c30501c8fd839902fc0e962b8f54 0 [ 177s] -/usr/lib/python3.12/site-packages/editables/__pycache__/redirector.cpython-312.pyc 12099828da1b30a0b2aa37cca58e9bc4e5549ded99033490e76add10d91e52ad 0 [ 177s] +/usr/lib/python3.12/site-packages/editables/__pycache__/__init__.cpython-312.pyc 589988389cfdc39dde987ce2574aa449c788b78dee24e6825ecfe5224c4f9f0b 0 [ 177s] +/usr/lib/python3.12/site-packages/editables/__pycache__/redirector.cpython-312.pyc 9f735e2278003e314ef84e0213430797fa5f0ce81b8ad024185db5e2425ccc61 0 [ 177s] @@ -114 +114 @@ [ 177s] -python3-editables-0.5-1.3.src.rpm [ 177s] +python3-editables-0.5-1.4.src.rpm [ 177s] comparing rpmtags [ 177s] comparing RELEASE [ 177s] comparing PROVIDES [ 177s] comparing scripts [ 177s] comparing filelist [ 177s] comparing file checksum [ 178s] creating rename script [ 178s] RPM file checksum differs. [ 178s] Extracting packages [ 179s] /usr/lib/python3.12/site-packages/editables/__pycache__/__init__.cpython-312.pyc differs at offset '538' (Byte-compiled Python module for CPython 3.12 or newer, timestamp-based, .py timestamp: Tue Aug 15 05:27:12 1995 UTC, .py size: 3645 bytes) [ 179s] --- old /usr/lib/python3.12/site-packages/editables/__pycache__/__init__.cpython-312.pyc (hex) [ 179s] +++ new /usr/lib/python3.12/site-packages/editables/__pycache__/__init__.cpython-312.pyc (hex) [ 179s] @@ -1,5 +1,5 @@ [ 179s] 00000200 2f 70 79 74 68 6f 6e 33 2d 65 64 69 74 61 62 6c |/python3-editabl| [ 179s] -00000210 65 73 2d 30 2e 35 2d 31 2e 33 2e 61 72 6d 2f 75 |es-0.5-1.3.arm/u| [ 179s] +00000210 65 73 2d 30 2e 35 2d 31 2e 34 2e 61 72 6d 2f 75 |es-0.5-1.4.arm/u| [ 179s] 00000220 73 72 2f 6c 69 62 2f 70 79 74 68 6f 6e 33 2e 31 |sr/lib/python3.1| [ 179s] 00000230 32 2f 73 69 74 65 2d 70 61 63 6b 61 67 65 73 2f |2/site-packages/| [ 179s] 00000240 65 64 69 74 61 62 6c 65 73 2f 5f 5f 69 6e 69 74 |editables/__init| [ 179s] No rpmlint.log available [ 179s] [ 179s] d35c6af4d0bb finished "build python3-editables.spec" at Tue Dec 10 07:21:42 UTC 2024. [ 179s]