[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 8aea0a10cbff started "build python3-calver.spec" at Fri Nov 29 15:28:36 UTC 2024. [ 0s] [ 0s] Building python3-calver for project 'Tizen-Base' repository 'standard' arch 'armv7l' srcmd5 'c32bd1077fe7369274e7e2766e9b0f51' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20/.build-srcdir/python3-calver.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20/.build-srcdir/python3-calver.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/20/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20/.build-srcdir/python3-calver.spec build ... [ 0s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/42] preinstalling libmagic-data... [ 1s] [2/42] preinstalling libncurses... [ 1s] [3/42] preinstalling setup... [ 1s] [4/42] preinstalling filesystem... [ 1s] [5/42] preinstalling glibc... [ 1s] [6/42] preinstalling libgcc... [ 1s] [7/42] preinstalling bash... [ 1s] [8/42] preinstalling diffutils... [ 1s] [9/42] preinstalling grep... [ 1s] [10/42] preinstalling libattr... [ 1s] [11/42] preinstalling libblkid... [ 2s] [12/42] preinstalling libbz2... [ 2s] [13/42] preinstalling libcap... [ 2s] [14/42] preinstalling libfreebl3... [ 2s] [15/42] preinstalling liblua... [ 2s] [16/42] preinstalling liblzma... [ 2s] [17/42] preinstalling libpopt... [ 2s] [18/42] preinstalling libreadline... [ 2s] [19/42] preinstalling libsmack... [ 2s] [20/42] preinstalling libsqlite... [ 2s] [21/42] preinstalling libuuid... [ 2s] [22/42] preinstalling libxcrypt... [ 2s] [23/42] preinstalling libzstd1... [ 2s] [24/42] preinstalling nspr... [ 2s] [25/42] preinstalling sed... [ 2s] [26/42] preinstalling zlib... [ 2s] [27/42] preinstalling qemu-accel-x86_64-armv7l... [ 13s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 17s] [29/42] preinstalling coreutils... [ 17s] [30/42] preinstalling libacl... [ 17s] [31/42] preinstalling libelf... [ 17s] [32/42] preinstalling libmount... [ 17s] [33/42] preinstalling smack... [ 18s] [34/42] preinstalling bzip2... [ 18s] [35/42] preinstalling libmagic... [ 18s] [36/42] preinstalling libxml2... [ 18s] [37/42] preinstalling tar... [ 18s] [38/42] preinstalling util-linux... [ 18s] [39/42] preinstalling util-linux-su... [ 18s] [40/42] preinstalling nss... [ 18s] [41/42] preinstalling libsoftokn3... [ 18s] [42/42] preinstalling rpm... [ 19s] running qemu-linux-user-x86_64-cross postinstall script [ 19s] running qemu-accel-x86_64-armv7l postinstall script [ 19s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.1.0/liblto_plugin.so': No such file or directory [ 19s] running setup postinstall script [ 19s] chroot: failed to run command '': No such file or directory [ 19s] initializing rpm db... [ 20s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 20s] breaking dependency libxcrypt-devel -> glibc-devel [ 20s] cycle: libsoftokn3 -> nss [ 20s] breaking dependency nss -> libsoftokn3 [ 20s] done [ 20s] querying package ids... [ 20s] [1/105] cumulate libmagic-data-5.45-1.3 [ 20s] [2/105] cumulate setup-0.9-1.2 [ 20s] [3/105] cumulate filesystem-3.1-1.1 [ 20s] [4/105] cumulate glibc-2.39-1.6 [ 20s] [5/105] cumulate libatomic-14.1.0-1.6 [ 20s] [6/105] cumulate libgcc-14.1.0-1.6 [ 20s] [7/105] cumulate bash-3.2.57-1.1 [ 20s] [8/105] cumulate cpio-2.8-1.1 [ 20s] [9/105] cumulate diffutils-3.10-1.1 [ 20s] [10/105] cumulate findutils-4.3.8-1.4 [ 20s] [11/105] cumulate gdbm-1.8.3-1.6 [ 20s] [12/105] cumulate hostname-3.23-1.1 [ 20s] [13/105] cumulate libattr-2.5.1-1.4 [ 20s] [14/105] cumulate libblkid-2.39.3-1.4 [ 20s] [15/105] cumulate libbz2-1.0.8-1.4 [ 20s] [16/105] cumulate libcap-2.69-1.5 [ 20s] [17/105] cumulate libexpat-2.6.2-1.5 [ 20s] [18/105] cumulate libffi-3.4.2-1.5 [ 20s] [19/105] cumulate libfreebl3-3.98-1.6 [ 20s] [20/105] cumulate libgfortran-14.1.0-1.6 [ 20s] [21/105] cumulate libgomp-14.1.0-1.6 [ 20s] [22/105] cumulate libitm-14.1.0-1.6 [ 20s] [23/105] cumulate libltdl-2.4.7-1.6 [ 20s] [24/105] cumulate liblua-5.1.5-1.3 [ 20s] [25/105] cumulate liblzma-5.4.5-1.6 [ 20s] [26/105] cumulate libopenssl3-3.0.13-1.6 [ 20s] [27/105] cumulate libpcre-8.45-1.4 [ 20s] [28/105] cumulate libpopt-1.16-1.3 [ 20s] [29/105] cumulate libpython3_121_0-3.12.0-1.5 [ 20s] [30/105] cumulate libsmack-1.3.1-1.3 [ 20s] [31/105] cumulate libsmartcols-2.39.3-1.4 [ 20s] [32/105] cumulate libsqlite-3.44.0-1.4 [ 20s] [33/105] cumulate libstdc++-14.1.0-1.6 [ 20s] [34/105] cumulate libuuid-2.39.3-1.4 [ 20s] [35/105] cumulate libxcrypt-4.4.36-1.6 [ 20s] [36/105] cumulate libzstd1-1.5.5-1.4 [ 20s] [37/105] cumulate m4-1.4.19-1.1 [ 20s] [38/105] cumulate net-tools-2.0_20121208git-1.3 [ 20s] [39/105] cumulate nspr-4.35-1.3 [ 20s] [40/105] cumulate patch-2.7.6-1.3 [ 20s] [41/105] cumulate pkg-config-0.29.2-1.4 [ 20s] [42/105] cumulate sed-4.1c-1.3 [ 20s] [43/105] cumulate update-alternatives-1.22.2-1.1 [ 20s] [44/105] cumulate which-2.17-1.1 [ 20s] [45/105] cumulate zlib-1.3-1.5 [ 20s] [46/105] cumulate build-compare-2023.06.18-1.1 [ 20s] [47/105] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 20s] [48/105] cumulate libstdc++-devel-14.1.0-1.6 [ 20s] [49/105] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 20s] [50/105] cumulate cpp-14.1.0-1.6 [ 20s] [51/105] cumulate gcc-c++-14.1.0-1.6 [ 20s] [52/105] cumulate binutils-libs-2.43-1.6 [ 20s] [53/105] cumulate coreutils-6.9-14.1 [ 20s] [54/105] cumulate gawk-3.1.5-1.1 [ 20s] [55/105] cumulate grep-2.5.2-1.3 [ 20s] [56/105] cumulate libacl-2.3.2-1.4 [ 20s] [57/105] cumulate libcc1-14.1.0-1.6 [ 20s] [58/105] cumulate libelf-0.189-1.6 [ 20s] [59/105] cumulate libmount-2.39.3-1.4 [ 20s] [60/105] cumulate libubsan-14.1.0-1.6 [ 20s] [61/105] cumulate make-4.4-1.4 [ 20s] [62/105] cumulate nss-certs-3.98-1.6 [ 20s] [63/105] cumulate smack-1.3.1-1.3 [ 20s] [64/105] cumulate bzip2-1.0.8-1.4 [ 20s] [65/105] cumulate libfdisk-2.39.3-1.4 [ 20s] [66/105] cumulate libmagic-5.45-1.3 [ 20s] [67/105] cumulate libxml2-2.12.5-1.5 [ 20s] [68/105] cumulate xz-5.4.5-1.6 [ 20s] [69/105] cumulate perl-5.38.0-1.5 [ 20s] [70/105] cumulate build-mkbaselibs-20120927-1.1 [ 20s] [71/105] cumulate linux-glibc-devel-6.6-1.5 [ 20s] [72/105] cumulate terminfo-base-full-6.4-1.6 [ 20s] [73/105] cumulate autoconf-2.71-1.5 [ 20s] [74/105] cumulate file-5.45-1.3 [ 20s] [75/105] cumulate glibc-locale-2.39-1.6 [ 20s] [76/105] cumulate tar-1.17-1.1 [ 20s] [77/105] cumulate binutils-2.43-1.6 [ 20s] [78/105] cumulate gzip-1.3.12-1.3 [ 20s] [79/105] cumulate pam-1.1.6-1.3 [ 20s] [80/105] cumulate tzdata-2023c-1.1 [ 20s] [81/105] cumulate libdw-0.189-1.6 [ 20s] [82/105] cumulate libarchive-3.7.2-1.5 [ 20s] [83/105] cumulate gcc-14.1.0-1.6 [ 20s] [84/105] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 20s] [85/105] cumulate automake-1.16.5-1.5 [ 20s] [86/105] cumulate libasm-0.189-1.6 [ 20s] [87/105] cumulate libncurses6-6.4-1.6 [ 20s] [88/105] cumulate build-20120927-1.1 [ 20s] [89/105] cumulate libncurses-6.4-1.6 [ 20s] [90/105] cumulate less-643-1.1 [ 20s] [91/105] cumulate libreadline-5.2-1.5 [ 20s] [92/105] cumulate libtool-2.4.7-1.6 [ 20s] [93/105] cumulate elfutils-0.189-1.6 [ 20s] [94/105] cumulate python3-base-3.12.0-1.5 [ 20s] [95/105] cumulate util-linux-2.39.3-1.4 [ 20s] [96/105] cumulate python3-3.12.0-1.1 [ 20s] [97/105] cumulate util-linux-su-2.39.3-1.4 [ 20s] [98/105] cumulate python3-devel-3.12.0-1.5 [ 20s] [99/105] cumulate python3-setuptools-69.0.2-1.1 [ 20s] [100/105] cumulate libxcrypt-devel-4.4.36-1.6 [ 20s] [101/105] cumulate nss-3.98-1.6 [ 20s] [102/105] cumulate glibc-devel-2.39-1.6 [ 20s] [103/105] cumulate libsoftokn3-3.98-1.6 [ 20s] [104/105] cumulate rpm-4.14.1.1-1.5 [ 20s] [105/105] cumulate rpm-build-4.14.1.1-1.5 [ 20s] now installing cumulated packages [ 21s] Preparing... ######################################## [ 21s] Updating / installing... [ 21s] setup-0.9-1.2 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 21s] ########################## [ 21s] filesystem-3.1-1.1 ######################################## [ 21s] libmagic-data-5.45-1.3 ######################################## [ 21s] glibc-2.39-1.6 ######################################## [ 22s] libgcc-14.1.0-1.6 ######################################## [ 22s] bash-3.2.57-1.1 ######################################## [ 22s] zlib-1.3-1.5 ######################################## [ 23s] coreutils-6.9-14.1 ######################################## [ 23s] libbz2-1.0.8-1.4 ######################################## [ 23s] liblzma-5.4.5-1.6 ######################################## [ 23s] libstdc++-14.1.0-1.6 ######################################## [ 24s] libelf-0.189-1.6 ######################################## [ 24s] libxcrypt-4.4.36-1.6 ######################################## [ 24s] libdw-0.189-1.6 ######################################## [ 25s] libmagic-5.45-1.3 ######################################## [ 25s] libblkid-2.39.3-1.4 ######################################## [ 25s] nspr-4.35-1.3 ######################################## [ 26s] pam-1.1.6-1.3 ######################################## [ 26s] gdbm-1.8.3-1.6 ######################################## [ 31s] perl-5.38.0-1.5 ######################################## [ 31s] libcap-2.69-1.5 ######################################## [ 31s] libfreebl3-3.98-1.6 ######################################## [ 31s] liblua-5.1.5-1.3 ######################################## [ 32s] libopenssl3-3.0.13-1.6 ######################################## [ 32s] libpopt-1.16-1.3 ######################################## [ 33s] libpython3_121_0-3.12.0-1.5 ######################################## [ 33s] libsqlite-3.44.0-1.4 ######################################## [ 33s] libuuid-2.39.3-1.4 ######################################## [ 33s] libzstd1-1.5.5-1.4 ######################################## [ 33s] pkg-config-0.29.2-1.4 ######################################## [ 33s] build-mkbaselibs-20120927-1.1 ######################################## [ 34s] linux-glibc-devel-6.6-1.5 ######################################## [ 34s] terminfo-base-full-6.4-1.6 ######################################## [ 34s] libncurses6-6.4-1.6 ######################################## [ 34s] libreadline-5.2-1.5 ######################################## [ 35s] libfdisk-2.39.3-1.4 ######################################## [ 35s] nss-certs-3.98-1.6 ######################################## [ 35s] libsoftokn3-3.98-1.6 ######################################## [ 35s] nss-3.98-1.6 ######################################## [ 36s] libmount-2.39.3-1.4 ######################################## [ 36s] libasm-0.189-1.6 ######################################## [ 36s] libcc1-14.1.0-1.6 ######################################## [ 36s] libubsan-14.1.0-1.6 ######################################## [ 36s] libxml2-2.12.5-1.5 ######################################## [ 37s] xz-5.4.5-1.6 ######################################## [ 37s] bzip2-1.0.8-1.4 ######################################## [ 37s] gzip-1.3.12-1.3 ######################################## [ 37s] binutils-libs-2.43-1.6 ######################################## [ 38s] binutils-2.43-1.6 ######################################## [ 38s] make-4.4-1.4 ######################################## [ 38s] findutils-4.3.8-1.4 ######################################## [ 38s] libattr-2.5.1-1.4 ######################################## [ 38s] libacl-2.3.2-1.4 ######################################## [ 39s] tar-1.17-1.1 ######################################## [ 39s] libarchive-3.7.2-1.5 ######################################## [ 40s] rpm-4.14.1.1-1.5 ######################################## [ 40s] libexpat-2.6.2-1.5 ######################################## [ 40s] libffi-3.4.2-1.5 ######################################## [ 43s] python3-base-3.12.0-1.5 ######################################## [ 43s] python3-3.12.0-1.1 ######################################## [ 43s] libgfortran-14.1.0-1.6 ######################################## [ 43s] libgomp-14.1.0-1.6 ######################################## [ 44s] libitm-14.1.0-1.6 ######################################## [ 44s] libltdl-2.4.7-1.6 ######################################## [ 44s] libpcre-8.45-1.4 ######################################## [ 44s] libsmack-1.3.1-1.3 ######################################## [ 45s] libsmartcols-2.39.3-1.4 ######################################## [ 45s] m4-1.4.19-1.1 ######################################## [ 45s] autoconf-2.71-1.5 ######################################## [ 45s] automake-1.16.5-1.5 ######################################## [ 46s] patch-2.7.6-1.3 ######################################## [ 46s] sed-4.1c-1.3 ######################################## [ 47s] util-linux-2.39.3-1.4 ######################################## [ 47s] libatomic-14.1.0-1.6 ######################################## [ 47s] libtool-2.4.7-1.6 ######################################## [ 48s] python3-setuptools-69.0.2-1.1 ######################################## [ 48s] build-20120927-1.1 ######################################## [ 48s] libncurses-6.4-1.6 ######################################## [ 48s] libstdc++-devel-14.1.0-1.6 ######################################## [ 48s] build-compare-2023.06.18-1.1 ######################################## [ 48s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 55s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 57s] gcc-14.1.0-1.6 ######################################## [ 57s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 57s] glibc-devel-2.39-1.6 ######################################## [ 75s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 76s] rpm-build-4.14.1.1-1.5 ######################################## [ 76s] util-linux-su-2.39.3-1.4 ######################################## [ 76s] smack-1.3.1-1.3 ######################################## [ 76s] grep-2.5.2-1.3 ######################################## [ 76s] python3-devel-3.12.0-1.5 ######################################## [ 76s] elfutils-0.189-1.6 ######################################## [ 76s] less-643-1.1 ######################################## [ 76s] file-5.45-1.3 ######################################## [ 76s] glibc-locale-2.39-1.6 ######################################## [ 77s] tzdata-2023c-1.1 ######################################## [ 78s] cpp-14.1.0-1.6 ######################################## [ 80s] gcc-c++-14.1.0-1.6 ######################################## [ 80s] gawk-3.1.5-1.1 ######################################## [ 80s] cpio-2.8-1.1 ######################################## [ 80s] diffutils-3.10-1.1 ######################################## [ 80s] hostname-3.23-1.1 ######################################## [ 80s] net-tools-2.0_20121208git-1.3 ######################################## [ 80s] update-alternatives-1.22.2-1.1 ######################################## [ 80s] which-2.17-1.1 ######################################## [ 80s] now finalizing build dir... [ 81s] ----------------------------------------------------------------- [ 81s] I have the following modifications for python3-calver.spec: [ 81s] 4c4 [ 81s] < Release: 0 [ 81s] --- [ 81s] > Release: 1.1 [ 81s] build target is armv7l-tizen-linux [ 81s] ----------------------------------------------------------------- [ 81s] ----- building python3-calver.spec (user abuild) [ 81s] ----------------------------------------------------------------- [ 81s] ----------------------------------------------------------------- [ 81s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/c32bd1077fe7369274e7e2766e9b0f51-python3-calver' /home/abuild/rpmbuild/SOURCES/python3-calver.spec [ 81s] Building target platforms: armv7l-tizen-linux [ 81s] Building for target armv7l-tizen-linux [ 81s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.pkmpNg [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + rm -rf calver-2022.6.26 [ 81s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/calver-2022.6.26.tar.gz [ 81s] + /bin/tar -xof - [ 81s] + STATUS=0 [ 81s] + '[' 0 -ne 0 ']' [ 81s] + cd calver-2022.6.26 [ 81s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 81s] + exit 0 [ 81s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.vdVJuK [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + cd calver-2022.6.26 [ 81s] + ref=/usr/lib/rpm [ 81s] + mints=0 [ 81s] + case $(uname -m) in [ 81s] ++ uname -m [ 81s] + for s in guess sub [ 81s] ++ find -maxdepth 8 -name config.guess [ 81s] + for s in guess sub [ 81s] ++ find -maxdepth 8 -name config.sub [ 81s] + LANG=C [ 81s] + export LANG [ 81s] + unset DISPLAY [ 81s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 81s] + export CFLAGS [ 81s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 81s] + export CXXFLAGS [ 81s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 81s] + export FFLAGS [ 81s] + LDFLAGS= [ 81s] + export LDFLAGS [ 81s] + cp /home/abuild/rpmbuild/SOURCES/python3-calver.manifest . [ 81s] + /usr/bin/python3 setup.py build [ 83s] running build [ 83s] running build_py [ 83s] creating build [ 83s] creating build/lib [ 83s] creating build/lib/calver [ 83s] copying src/calver/__init__.py -> build/lib/calver [ 83s] copying src/calver/integration.py -> build/lib/calver [ 83s] + exit 0 [ 83s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.735cYt [ 83s] + umask 022 [ 83s] + cd /home/abuild/rpmbuild/BUILD [ 83s] + cd calver-2022.6.26 [ 83s] + LANG=C [ 83s] + export LANG [ 83s] + unset DISPLAY [ 83s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm [ 83s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm [ 83s] + /usr/bin/python3 setup.py install --prefix=/usr --root=/home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm [ 84s] running install [ 84s] /usr/lib/python3.12/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. [ 84s] !! [ 84s] [ 84s] ******************************************************************************** [ 84s] Please avoid running ``setup.py`` directly. [ 84s] Instead, use pypa/build, pypa/installer or other [ 84s] standards-based tools. [ 84s] [ 84s] See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. [ 84s] ******************************************************************************** [ 84s] [ 84s] !! [ 84s] self.initialize_options() [ 84s] running build [ 84s] running build_py [ 84s] running install_lib [ 84s] creating /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr [ 84s] creating /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/lib [ 84s] creating /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/lib/python3.12 [ 84s] creating /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/lib/python3.12/site-packages [ 84s] creating /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/lib/python3.12/site-packages/calver [ 84s] copying build/lib/calver/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/lib/python3.12/site-packages/calver [ 84s] copying build/lib/calver/integration.py -> /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/lib/python3.12/site-packages/calver [ 84s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/lib/python3.12/site-packages/calver/__init__.py to __init__.cpython-312.pyc [ 84s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/lib/python3.12/site-packages/calver/integration.py to integration.cpython-312.pyc [ 84s] running install_egg_info [ 84s] running egg_info [ 84s] writing src/calver.egg-info/PKG-INFO [ 84s] writing dependency_links to src/calver.egg-info/dependency_links.txt [ 84s] writing entry points to src/calver.egg-info/entry_points.txt [ 85s] writing top-level names to src/calver.egg-info/top_level.txt [ 85s] reading manifest file 'src/calver.egg-info/SOURCES.txt' [ 85s] reading manifest template 'MANIFEST.in' [ 85s] adding license file 'LICENSE' [ 85s] writing manifest file 'src/calver.egg-info/SOURCES.txt' [ 85s] Copying src/calver.egg-info to /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/lib/python3.12/site-packages/calver-2022.6.26-py3.12.egg-info [ 85s] running install_scripts [ 85s] + rm -f /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/lib/python3.12/site-packages/build/py.typed [ 85s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2022.6.26-1.1 --unique-debug-src-base python3-calver-2022.6.26-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/calver-2022.6.26 [ 85s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/calver-2022.6.26/python3-calver-debuginfo.manifest [ 85s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/calver-2022.6.26/python3-calver-debugsource.manifest [ 85s] + /usr/lib/rpm/check-buildroot [ 85s] + /usr/lib/rpm//brp-compress [ 85s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 85s] + /usr/lib/rpm/brp-python-hardlink [ 86s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm [ 86s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/calver-2022.6.26/isu.list [ 86s] ~/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm ~/rpmbuild/BUILD/calver-2022.6.26 [ 86s] ~/rpmbuild/BUILD/calver-2022.6.26 [ 86s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 86s] Processing files: python3-calver-2022.6.26-1.1.noarch [ 86s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Wm5XA3 [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd calver-2022.6.26 [ 86s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/share/licenses/python3-calver [ 86s] + export LC_ALL=C [ 86s] + LC_ALL=C [ 86s] + export LICENSEDIR [ 86s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/share/licenses/python3-calver [ 86s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm/usr/share/licenses/python3-calver [ 86s] + exit 0 [ 86s] Provides: python3-calver = 2022.6.26-1.1 [ 86s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 86s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm [ 86s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-calver-2022.6.26-1.1.src.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-calver-2022.6.26-1.1.noarch.rpm [ 86s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.5cu7qd [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd calver-2022.6.26 [ 86s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-calver-2022.6.26-1.1.arm [ 86s] + exit 0 [ 86s] ... checking for files with abuild user/group [ 86s] ... creating baselibs [ 87s] [ 87s] 8aea0a10cbff finished "build python3-calver.spec" at Fri Nov 29 15:30:03 UTC 2024. [ 87s] Retried build at Sat Nov 30 01:43:13 2024 returned same result, skipped Retried build at Mon Dec 2 16:35:30 2024 returned same result, skipped Retried build at Tue Dec 10 07:02:37 2024 returned same result, skipped