[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 86c5bb0bb39f started "build python3-editables.spec" at Fri Dec 13 09:09:22 UTC 2024. [ 0s] [ 0s] Building python3-editables for project 'Tizen-Base' repository 'standard' arch 'armv7l' srcmd5 '31cd546ddb530bf965429438ef9c0673' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27/.build-srcdir/python3-editables.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27/.build-srcdir/python3-editables.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/27/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.27/.build-srcdir/python3-editables.spec build ... [ 1s] registering binfmt handlers for cross build [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/42] preinstalling libmagic-data... [ 2s] [2/42] preinstalling libncurses... [ 2s] [3/42] preinstalling setup... [ 2s] [4/42] preinstalling filesystem... [ 2s] [5/42] preinstalling glibc... [ 2s] [6/42] preinstalling libgcc... [ 2s] [7/42] preinstalling bash... [ 2s] [8/42] preinstalling diffutils... [ 2s] [9/42] preinstalling grep... [ 2s] [10/42] preinstalling libattr... [ 2s] [11/42] preinstalling libblkid... [ 2s] [12/42] preinstalling libbz2... [ 2s] [13/42] preinstalling libcap... [ 3s] [14/42] preinstalling libfreebl3... [ 3s] [15/42] preinstalling liblua... [ 3s] [16/42] preinstalling liblzma... [ 3s] [17/42] preinstalling libpopt... [ 3s] [18/42] preinstalling libreadline... [ 3s] [19/42] preinstalling libsmack... [ 3s] [20/42] preinstalling libsqlite... [ 3s] [21/42] preinstalling libuuid... [ 3s] [22/42] preinstalling libxcrypt... [ 3s] [23/42] preinstalling libzstd1... [ 3s] [24/42] preinstalling nspr... [ 3s] [25/42] preinstalling sed... [ 3s] [26/42] preinstalling zlib... [ 3s] [27/42] preinstalling qemu-accel-x86_64-armv7l... [ 17s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 23s] [29/42] preinstalling coreutils... [ 23s] [30/42] preinstalling libacl... [ 23s] [31/42] preinstalling libelf... [ 24s] [32/42] preinstalling libmount... [ 24s] [33/42] preinstalling smack... [ 24s] [34/42] preinstalling bzip2... [ 24s] [35/42] preinstalling libmagic... [ 24s] [36/42] preinstalling libxml2... [ 24s] [37/42] preinstalling tar... [ 24s] [38/42] preinstalling util-linux... [ 24s] [39/42] preinstalling util-linux-su... [ 24s] [40/42] preinstalling nss... [ 24s] [41/42] preinstalling libsoftokn3... [ 24s] [42/42] preinstalling rpm... [ 25s] running qemu-linux-user-x86_64-cross postinstall script [ 25s] running qemu-accel-x86_64-armv7l postinstall script [ 26s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 26s] running setup postinstall script [ 26s] chroot: failed to run command '': No such file or directory [ 26s] initializing rpm db... [ 26s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 26s] breaking dependency libxcrypt-devel -> glibc-devel [ 26s] cycle: libsoftokn3 -> nss [ 26s] breaking dependency nss -> libsoftokn3 [ 26s] done [ 26s] querying package ids... [ 27s] [1/113] cumulate libmagic-data-5.45-1.4 [ 27s] [2/113] cumulate python3-flit_core-3.9.0-1.1 [ 27s] [3/113] cumulate python3-pyparsing-3.1.1-1.1 [ 27s] [4/113] cumulate python3-pyproject_hooks-1.0.0-1.1 [ 27s] [5/113] cumulate python3-six-1.16.0-1.1 [ 27s] [6/113] cumulate python3-typing_extensions-4.9.0-1.1 [ 27s] [7/113] cumulate setup-0.9-1.11 [ 27s] [8/113] cumulate filesystem-3.1-1.1 [ 27s] [9/113] cumulate python3-packaging-23.2-1.1 [ 27s] [10/113] cumulate glibc-2.39-1.6 [ 27s] [11/113] cumulate libatomic-14.2.0-1.6 [ 27s] [12/113] cumulate libgcc-14.2.0-1.6 [ 27s] [13/113] cumulate bash-3.2.57-1.1 [ 27s] [14/113] cumulate cpio-2.8-1.3 [ 27s] [15/113] cumulate diffutils-3.10-1.2 [ 27s] [16/113] cumulate findutils-4.3.8-1.4 [ 27s] [17/113] cumulate gdbm-1.8.3-1.6 [ 27s] [18/113] cumulate hostname-3.23-1.3 [ 27s] [19/113] cumulate libattr-2.5.1-1.4 [ 27s] [20/113] cumulate libblkid-2.39.3-1.4 [ 27s] [21/113] cumulate libbz2-1.0.8-1.4 [ 27s] [22/113] cumulate libcap-2.69-1.4 [ 27s] [23/113] cumulate libexpat-2.6.2-1.5 [ 27s] [24/113] cumulate libffi-3.4.2-1.5 [ 27s] [25/113] cumulate libfreebl3-3.98-1.6 [ 27s] [26/113] cumulate libgfortran-14.2.0-1.6 [ 27s] [27/113] cumulate libgomp-14.2.0-1.6 [ 27s] [28/113] cumulate libitm-14.2.0-1.6 [ 27s] [29/113] cumulate libltdl-2.4.7-1.6 [ 27s] [30/113] cumulate liblua-5.1.5-1.4 [ 27s] [31/113] cumulate liblzma-5.4.5-1.6 [ 27s] [32/113] cumulate libopenssl3-3.0.13-1.6 [ 27s] [33/113] cumulate libpcre-8.45-1.4 [ 27s] [34/113] cumulate libpopt-1.16-1.3 [ 27s] [35/113] cumulate libpython3_121_0-3.12.0-1.5 [ 27s] [36/113] cumulate libsmack-1.3.1-1.3 [ 27s] [37/113] cumulate libsmartcols-2.39.3-1.4 [ 27s] [38/113] cumulate libsqlite-3.44.0-1.4 [ 27s] [39/113] cumulate libstdc++-14.2.0-1.6 [ 27s] [40/113] cumulate libuuid-2.39.3-1.4 [ 27s] [41/113] cumulate libxcrypt-4.4.36-1.6 [ 27s] [42/113] cumulate libzstd1-1.5.5-1.5 [ 27s] [43/113] cumulate m4-1.4.19-1.1 [ 27s] [44/113] cumulate net-tools-2.0_20121208git-1.3 [ 27s] [45/113] cumulate nspr-4.35-1.4 [ 27s] [46/113] cumulate patch-2.7.6-1.3 [ 27s] [47/113] cumulate pkg-config-0.29.2-1.4 [ 27s] [48/113] cumulate sed-4.1c-1.4 [ 27s] [49/113] cumulate update-alternatives-1.22.2-1.2 [ 27s] [50/113] cumulate which-2.17-1.3 [ 27s] [51/113] cumulate zlib-1.3-1.5 [ 27s] [52/113] cumulate build-compare-2023.06.18-1.11 [ 27s] [53/113] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 27s] [54/113] cumulate libstdc++-devel-14.2.0-1.6 [ 27s] [55/113] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 27s] [56/113] cumulate cpp-14.2.0-1.6 [ 27s] [57/113] cumulate gcc-c++-14.2.0-1.6 [ 27s] [58/113] cumulate binutils-libs-2.43-1.6 [ 27s] [59/113] cumulate coreutils-6.9-14.9 [ 27s] [60/113] cumulate gawk-3.1.5-1.2 [ 27s] [61/113] cumulate grep-2.5.2-1.3 [ 27s] [62/113] cumulate libacl-2.3.2-1.4 [ 27s] [63/113] cumulate libcc1-14.2.0-1.6 [ 27s] [64/113] cumulate libelf-0.189-1.6 [ 27s] [65/113] cumulate libmount-2.39.3-1.4 [ 27s] [66/113] cumulate libubsan-14.2.0-1.6 [ 27s] [67/113] cumulate make-4.4-1.4 [ 27s] [68/113] cumulate nss-certs-3.98-1.6 [ 27s] [69/113] cumulate smack-1.3.1-1.3 [ 27s] [70/113] cumulate bzip2-1.0.8-1.4 [ 27s] [71/113] cumulate libfdisk-2.39.3-1.4 [ 27s] [72/113] cumulate libmagic-5.45-1.4 [ 27s] [73/113] cumulate libxml2-2.12.5-1.5 [ 27s] [74/113] cumulate xz-5.4.5-1.6 [ 27s] [75/113] cumulate perl-5.38.0-1.4 [ 27s] [76/113] cumulate build-mkbaselibs-20120927-1.1 [ 27s] [77/113] cumulate linux-glibc-devel-6.6-1.6 [ 27s] [78/113] cumulate terminfo-base-full-6.4-1.6 [ 27s] [79/113] cumulate autoconf-2.71-1.5 [ 27s] [80/113] cumulate file-5.45-1.4 [ 27s] [81/113] cumulate glibc-locale-2.39-1.6 [ 27s] [82/113] cumulate tar-1.17-1.2 [ 27s] [83/113] cumulate binutils-2.43-1.6 [ 27s] [84/113] cumulate gzip-1.3.12-1.4 [ 27s] [85/113] cumulate pam-1.1.6-1.3 [ 27s] [86/113] cumulate tzdata-2023c-1.2 [ 27s] [87/113] cumulate libdw-0.189-1.6 [ 27s] [88/113] cumulate libarchive-3.7.2-1.5 [ 27s] [89/113] cumulate gcc-14.2.0-1.6 [ 27s] [90/113] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 27s] [91/113] cumulate automake-1.16.5-1.6 [ 27s] [92/113] cumulate libasm-0.189-1.6 [ 27s] [93/113] cumulate libncurses6-6.4-1.6 [ 27s] [94/113] cumulate build-20120927-1.1 [ 27s] [95/113] cumulate libncurses-6.4-1.6 [ 27s] [96/113] cumulate less-643-1.2 [ 27s] [97/113] cumulate libreadline-5.2-1.4 [ 27s] [98/113] cumulate libtool-2.4.7-1.6 [ 27s] [99/113] cumulate elfutils-0.189-1.6 [ 27s] [100/113] cumulate python3-base-3.12.0-1.5 [ 27s] [101/113] cumulate util-linux-2.39.3-1.4 [ 27s] [102/113] cumulate python3-3.12.0-1.1 [ 27s] [103/113] cumulate python3-build-1.0.3-1.1 [ 27s] [104/113] cumulate util-linux-su-2.39.3-1.4 [ 27s] [105/113] cumulate python3-devel-3.12.0-1.5 [ 27s] [106/113] cumulate python3-setuptools-69.0.2-1.1 [ 27s] [107/113] cumulate python3-pip-23.3.1-1.1 [ 27s] [108/113] cumulate libxcrypt-devel-4.4.36-1.6 [ 27s] [109/113] cumulate nss-3.98-1.6 [ 27s] [110/113] cumulate glibc-devel-2.39-1.6 [ 27s] [111/113] cumulate libsoftokn3-3.98-1.6 [ 27s] [112/113] cumulate rpm-4.14.1.1-1.6 [ 27s] [113/113] cumulate rpm-build-4.14.1.1-1.6 [ 27s] now installing cumulated packages [ 33s] Preparing... ######################################## [ 33s] Updating / installing... [ 34s] setup-0.9-1.11 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 34s] ########################## [ 34s] filesystem-3.1-1.1 ######################################## [ 34s] python3-typing_extensions-4.9.0-1.1 ######################################## [ 34s] python3-six-1.16.0-1.1 ######################################## [ 34s] python3-pyproject_hooks-1.0.0-1.1 ######################################## [ 34s] python3-pyparsing-3.1.1-1.1 ######################################## [ 34s] python3-packaging-23.2-1.1 ######################################## [ 34s] libmagic-data-5.45-1.4 ######################################## [ 34s] python3-flit_core-3.9.0-1.1 ######################################## [ 35s] glibc-2.39-1.6 ######################################## [ 36s] libgcc-14.2.0-1.6 ######################################## [ 36s] bash-3.2.57-1.1 ######################################## [ 36s] zlib-1.3-1.5 ######################################## [ 37s] coreutils-6.9-14.9 ######################################## [ 37s] libbz2-1.0.8-1.4 ######################################## [ 38s] liblzma-5.4.5-1.6 ######################################## [ 38s] libstdc++-14.2.0-1.6 ######################################## [ 38s] libelf-0.189-1.6 ######################################## [ 39s] libxcrypt-4.4.36-1.6 ######################################## [ 39s] libdw-0.189-1.6 ######################################## [ 39s] libmagic-5.45-1.4 ######################################## [ 40s] libblkid-2.39.3-1.4 ######################################## [ 40s] nspr-4.35-1.4 ######################################## [ 40s] pam-1.1.6-1.3 ######################################## [ 41s] gdbm-1.8.3-1.6 ######################################## [ 45s] perl-5.38.0-1.4 ######################################## [ 46s] libcap-2.69-1.4 ######################################## [ 46s] libfreebl3-3.98-1.6 ######################################## [ 46s] liblua-5.1.5-1.4 ######################################## [ 47s] libopenssl3-3.0.13-1.6 ######################################## [ 47s] libpopt-1.16-1.3 ######################################## [ 48s] libpython3_121_0-3.12.0-1.5 ######################################## [ 48s] libsqlite-3.44.0-1.4 ######################################## [ 48s] libuuid-2.39.3-1.4 ######################################## [ 49s] libzstd1-1.5.5-1.5 ######################################## [ 49s] pkg-config-0.29.2-1.4 ######################################## [ 49s] build-mkbaselibs-20120927-1.1 ######################################## [ 50s] linux-glibc-devel-6.6-1.6 ######################################## [ 50s] terminfo-base-full-6.4-1.6 ######################################## [ 50s] libncurses6-6.4-1.6 ######################################## [ 51s] libreadline-5.2-1.4 ######################################## [ 51s] libfdisk-2.39.3-1.4 ######################################## [ 51s] nss-certs-3.98-1.6 ######################################## [ 51s] libsoftokn3-3.98-1.6 ######################################## [ 52s] nss-3.98-1.6 ######################################## [ 52s] libmount-2.39.3-1.4 ######################################## [ 53s] libasm-0.189-1.6 ######################################## [ 53s] libcc1-14.2.0-1.6 ######################################## [ 53s] libubsan-14.2.0-1.6 ######################################## [ 54s] libxml2-2.12.5-1.5 ######################################## [ 54s] xz-5.4.5-1.6 ######################################## [ 54s] bzip2-1.0.8-1.4 ######################################## [ 54s] gzip-1.3.12-1.4 ######################################## [ 54s] binutils-libs-2.43-1.6 ######################################## [ 55s] binutils-2.43-1.6 ######################################## [ 55s] make-4.4-1.4 ######################################## [ 55s] findutils-4.3.8-1.4 ######################################## [ 55s] libattr-2.5.1-1.4 ######################################## [ 56s] libacl-2.3.2-1.4 ######################################## [ 56s] tar-1.17-1.2 ######################################## [ 56s] libarchive-3.7.2-1.5 ######################################## [ 58s] rpm-4.14.1.1-1.6 ######################################## [ 58s] libexpat-2.6.2-1.5 ######################################## [ 58s] libffi-3.4.2-1.5 ######################################## [ 61s] python3-base-3.12.0-1.5 ######################################## [ 61s] python3-3.12.0-1.1 ######################################## [ 62s] python3-setuptools-69.0.2-1.1 ######################################## [ 62s] libgfortran-14.2.0-1.6 ######################################## [ 62s] libgomp-14.2.0-1.6 ######################################## [ 62s] libitm-14.2.0-1.6 ######################################## [ 63s] libltdl-2.4.7-1.6 ######################################## [ 63s] libpcre-8.45-1.4 ######################################## [ 64s] libsmack-1.3.1-1.3 ######################################## [ 64s] libsmartcols-2.39.3-1.4 ######################################## [ 64s] m4-1.4.19-1.1 ######################################## [ 65s] autoconf-2.71-1.5 ######################################## [ 65s] automake-1.16.5-1.6 ######################################## [ 65s] patch-2.7.6-1.3 ######################################## [ 65s] sed-4.1c-1.4 ######################################## [ 67s] util-linux-2.39.3-1.4 ######################################## [ 67s] libatomic-14.2.0-1.6 ######################################## [ 68s] libtool-2.4.7-1.6 ######################################## [ 69s] python3-pip-23.3.1-1.1 ######################################## [ 69s] python3-build-1.0.3-1.1 ######################################## [ 69s] build-20120927-1.1 ######################################## [ 69s] libncurses-6.4-1.6 ######################################## [ 71s] libstdc++-devel-14.2.0-1.6 ######################################## [ 71s] build-compare-2023.06.18-1.11 ######################################## [ 71s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 79s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 84s] gcc-14.2.0-1.6 ######################################## [ 84s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 84s] glibc-devel-2.39-1.6 ######################################## [ 104s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 105s] rpm-build-4.14.1.1-1.6 ######################################## [ 105s] util-linux-su-2.39.3-1.4 ######################################## [ 105s] smack-1.3.1-1.3 ######################################## [ 105s] grep-2.5.2-1.3 ######################################## [ 105s] python3-devel-3.12.0-1.5 ######################################## [ 105s] elfutils-0.189-1.6 ######################################## [ 105s] less-643-1.2 ######################################## [ 105s] file-5.45-1.4 ######################################## [ 106s] glibc-locale-2.39-1.6 ######################################## [ 106s] tzdata-2023c-1.2 ######################################## [ 108s] cpp-14.2.0-1.6 ######################################## [ 110s] gcc-c++-14.2.0-1.6 ######################################## [ 110s] gawk-3.1.5-1.2 ######################################## [ 110s] cpio-2.8-1.3 ######################################## [ 111s] diffutils-3.10-1.2 ######################################## [ 111s] hostname-3.23-1.3 ######################################## [ 111s] net-tools-2.0_20121208git-1.3 ######################################## [ 111s] update-alternatives-1.22.2-1.2 ######################################## [ 111s] which-2.17-1.3 ######################################## [ 111s] now finalizing build dir... [ 112s] ----------------------------------------------------------------- [ 112s] I have the following modifications for python3-editables.spec: [ 112s] 4c4 [ 112s] < Release: 0 [ 112s] --- [ 112s] > Release: 1.1 [ 113s] build target is armv7l-tizen-linux [ 113s] ----------------------------------------------------------------- [ 113s] ----- building python3-editables.spec (user abuild) [ 113s] ----------------------------------------------------------------- [ 113s] ----------------------------------------------------------------- [ 113s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/31cd546ddb530bf965429438ef9c0673-python3-editables' /home/abuild/rpmbuild/SOURCES/python3-editables.spec [ 113s] Building target platforms: armv7l-tizen-linux [ 113s] Building for target armv7l-tizen-linux [ 113s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.H93cNT [ 113s] + umask 022 [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + rm -rf editables-0.5 [ 113s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/editables-0.5.tar.gz [ 113s] + /bin/tar -xof - [ 113s] + STATUS=0 [ 113s] + '[' 0 -ne 0 ']' [ 113s] + cd editables-0.5 [ 113s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 113s] + exit 0 [ 113s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.6yCvP8 [ 113s] + umask 022 [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + cd editables-0.5 [ 113s] + ref=/usr/lib/rpm [ 113s] + mints=0 [ 113s] + case $(uname -m) in [ 113s] ++ uname -m [ 113s] + for s in guess sub [ 113s] ++ find -maxdepth 8 -name config.guess [ 113s] + for s in guess sub [ 113s] ++ find -maxdepth 8 -name config.sub [ 113s] + LANG=C [ 113s] + export LANG [ 113s] + unset DISPLAY [ 113s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 113s] + export CFLAGS [ 113s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 113s] + export CXXFLAGS [ 113s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 113s] + export FFLAGS [ 113s] + LDFLAGS= [ 113s] + export LDFLAGS [ 113s] + cp /home/abuild/rpmbuild/SOURCES/python3-editables.manifest . [ 113s] + /usr/bin/python3 -m build -n [ 115s] * Getting build dependencies for sdist... [ 117s] * Building sdist... [ 118s] * Building wheel from sdist [ 118s] * Getting build dependencies for wheel... [ 119s] * Building wheel... [ 120s] Successfully built editables-0.5.tar.gz and editables-0.5-py3-none-any.whl [ 121s] + exit 0 [ 121s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.CPGHLO [ 121s] + umask 022 [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + cd editables-0.5 [ 121s] + LANG=C [ 121s] + export LANG [ 121s] + unset DISPLAY [ 121s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm [ 121s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm [ 121s] + /usr/bin/python3 -m pip install --root /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm ./dist/editables-0.5-py3-none-any.whl [ 126s] Processing ./dist/editables-0.5-py3-none-any.whl [ 127s] Installing collected packages: editables [ 128s] Successfully installed editables-0.5 [ 128s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.5-1.1 --unique-debug-src-base python3-editables-0.5-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/editables-0.5 [ 128s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/editables-0.5/python3-editables-debuginfo.manifest [ 128s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/editables-0.5/python3-editables-debugsource.manifest [ 128s] + /usr/lib/rpm/check-buildroot [ 128s] + /usr/lib/rpm//brp-compress [ 128s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 128s] + /usr/lib/rpm/brp-python-hardlink [ 128s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm [ 129s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/editables-0.5/isu.list [ 129s] ~/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm ~/rpmbuild/BUILD/editables-0.5 [ 129s] ~/rpmbuild/BUILD/editables-0.5 [ 129s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 129s] Processing files: python3-editables-0.5-1.1.noarch [ 129s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 129s] IiAvPgogICAgPC9yZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 129s] [ 129s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.xPguRd [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd editables-0.5 [ 129s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm/usr/share/licenses/python3-editables [ 129s] + export LC_ALL=C [ 129s] + LC_ALL=C [ 129s] + export LICENSEDIR [ 129s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm/usr/share/licenses/python3-editables [ 129s] + cp -pr LICENSE.txt /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm/usr/share/licenses/python3-editables [ 129s] + exit 0 [ 129s] Provides: python3-editables = 0.5-1.1 [ 129s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 129s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm [ 129s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-editables-0.5-1.1.src.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-editables-0.5-1.1.noarch.rpm [ 129s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.haYM0r [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd editables-0.5 [ 129s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-editables-0.5-1.1.arm [ 129s] + exit 0 [ 129s] ... checking for files with abuild user/group [ 129s] ... creating baselibs [ 130s] [ 130s] 86c5bb0bb39f finished "build python3-editables.spec" at Fri Dec 13 09:11:32 UTC 2024. [ 130s]