[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7 [ 1s] Using BUILD_ARCH=riscv64 [ 1s] [ 1s] [ 1s] 86c5bb0bb39f started "build python3-nose.spec" at Fri Dec 13 09:09:21 UTC 2024. [ 1s] [ 1s] Building python3-nose for project 'Tizen-Base' repository 'standard' arch 'riscv64' srcmd5 '21fabebcca7f55a09c8b45ef1a2586c3' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/python3-nose.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/python3-nose.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/python3-nose.spec build ... [ 1s] registering binfmt handlers for cross build [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/42] preinstalling libmagic-data... [ 2s] [2/42] preinstalling libncurses... [ 2s] [3/42] preinstalling setup... [ 2s] [4/42] preinstalling filesystem... [ 2s] [5/42] preinstalling glibc... [ 3s] [6/42] preinstalling bash... [ 3s] [7/42] preinstalling diffutils... [ 3s] [8/42] preinstalling grep... [ 3s] [9/42] preinstalling libattr... [ 3s] [10/42] preinstalling libblkid... [ 3s] [11/42] preinstalling libbz2... [ 3s] [12/42] preinstalling libfreebl3... [ 3s] [13/42] preinstalling libgcc... [ 3s] [14/42] preinstalling liblua... [ 3s] [15/42] preinstalling liblzma... [ 3s] [16/42] preinstalling libpopt... [ 3s] [17/42] preinstalling libreadline... [ 3s] [18/42] preinstalling libsmack... [ 3s] [19/42] preinstalling libsqlite... [ 4s] [20/42] preinstalling libuuid... [ 4s] [21/42] preinstalling libxcrypt... [ 4s] [22/42] preinstalling libzstd1... [ 4s] [23/42] preinstalling nspr... [ 4s] [24/42] preinstalling sed... [ 4s] [25/42] preinstalling zlib... [ 4s] [26/42] preinstalling qemu-accel-x86_64-riscv64... [ 21s] [27/42] preinstalling qemu-linux-user-x86_64-cross... [ 26s] [28/42] preinstalling coreutils... [ 27s] [29/42] preinstalling libacl... [ 27s] [30/42] preinstalling libcap... [ 27s] [31/42] preinstalling libelf... [ 27s] [32/42] preinstalling libmount... [ 27s] [33/42] preinstalling smack... [ 27s] [34/42] preinstalling bzip2... [ 27s] [35/42] preinstalling libmagic... [ 27s] [36/42] preinstalling libxml2... [ 27s] [37/42] preinstalling tar... [ 27s] [38/42] preinstalling util-linux... [ 27s] [39/42] preinstalling util-linux-su... [ 27s] [40/42] preinstalling nss... [ 28s] [41/42] preinstalling libsoftokn3... [ 28s] [42/42] preinstalling rpm... [ 28s] running qemu-linux-user-x86_64-cross postinstall script [ 29s] running qemu-accel-x86_64-riscv64 postinstall script [ 29s] mv: cannot stat `/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 29s] running setup postinstall script [ 29s] chroot: failed to run command '': No such file or directory [ 29s] initializing rpm db... [ 29s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 30s] breaking dependency libxcrypt-devel -> glibc-devel [ 30s] cycle: libsoftokn3 -> nss [ 30s] breaking dependency nss -> libsoftokn3 [ 30s] done [ 30s] querying package ids... [ 30s] [1/105] cumulate libmagic-data-5.45-1.4 [ 30s] [2/105] cumulate setup-0.9-1.11 [ 30s] [3/105] cumulate filesystem-3.1-1.1 [ 30s] [4/105] cumulate glibc-2.39-1.6 [ 30s] [5/105] cumulate bash-3.2.57-1.1 [ 30s] [6/105] cumulate cpio-2.8-1.2 [ 30s] [7/105] cumulate diffutils-3.10-1.1 [ 30s] [8/105] cumulate findutils-4.3.8-1.4 [ 30s] [9/105] cumulate gdbm-1.8.3-1.6 [ 30s] [10/105] cumulate hostname-3.23-1.2 [ 30s] [11/105] cumulate libatomic-14.2.0-1.6 [ 30s] [12/105] cumulate libattr-2.5.1-1.5 [ 30s] [13/105] cumulate libblkid-2.39.3-1.4 [ 30s] [14/105] cumulate libbz2-1.0.8-1.5 [ 30s] [15/105] cumulate libexpat-2.6.2-1.5 [ 30s] [16/105] cumulate libffi-3.4.2-1.5 [ 30s] [17/105] cumulate libfreebl3-3.98-1.6 [ 30s] [18/105] cumulate libgcc-14.2.0-1.6 [ 30s] [19/105] cumulate libgomp-14.2.0-1.6 [ 30s] [20/105] cumulate libitm-14.2.0-1.6 [ 30s] [21/105] cumulate libltdl-2.4.7-1.6 [ 30s] [22/105] cumulate liblua-5.1.5-1.4 [ 30s] [23/105] cumulate liblzma-5.4.5-1.6 [ 30s] [24/105] cumulate libopenssl3-3.0.13-1.6 [ 30s] [25/105] cumulate libpcre-8.45-1.4 [ 30s] [26/105] cumulate libpopt-1.16-1.4 [ 30s] [27/105] cumulate libpython3_121_0-3.12.0-1.5 [ 30s] [28/105] cumulate libsmack-1.3.1-1.4 [ 30s] [29/105] cumulate libsmartcols-2.39.3-1.4 [ 30s] [30/105] cumulate libsqlite-3.44.0-1.5 [ 30s] [31/105] cumulate libuuid-2.39.3-1.4 [ 30s] [32/105] cumulate libxcrypt-4.4.36-1.5 [ 30s] [33/105] cumulate libzstd1-1.5.5-1.5 [ 30s] [34/105] cumulate m4-1.4.19-1.1 [ 30s] [35/105] cumulate net-tools-2.0_20121208git-1.3 [ 30s] [36/105] cumulate nspr-4.35-1.4 [ 30s] [37/105] cumulate patch-2.7.6-1.4 [ 30s] [38/105] cumulate pkg-config-0.29.2-1.5 [ 30s] [39/105] cumulate sed-4.1c-1.4 [ 30s] [40/105] cumulate update-alternatives-1.22.2-1.1 [ 30s] [41/105] cumulate which-2.17-1.2 [ 30s] [42/105] cumulate zlib-1.3-1.5 [ 30s] [43/105] cumulate build-compare-2023.06.18-1.11 [ 30s] [44/105] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 30s] [45/105] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 30s] [46/105] cumulate binutils-libs-2.43-1.6 [ 30s] [47/105] cumulate coreutils-6.9-14.9 [ 30s] [48/105] cumulate cpp-14.2.0-1.6 [ 30s] [49/105] cumulate gawk-3.1.5-1.2 [ 30s] [50/105] cumulate gcc-c++-14.2.0-1.6 [ 30s] [51/105] cumulate grep-2.5.2-1.4 [ 30s] [52/105] cumulate libacl-2.3.2-1.4 [ 30s] [53/105] cumulate libcap-2.69-1.5 [ 30s] [54/105] cumulate libelf-0.189-1.6 [ 30s] [55/105] cumulate libgfortran-14.2.0-1.6 [ 30s] [56/105] cumulate libmount-2.39.3-1.4 [ 30s] [57/105] cumulate libstdc++-14.2.0-1.6 [ 30s] [58/105] cumulate make-4.4-1.4 [ 30s] [59/105] cumulate nss-certs-3.98-1.6 [ 30s] [60/105] cumulate smack-1.3.1-1.4 [ 30s] [61/105] cumulate bzip2-1.0.8-1.5 [ 30s] [62/105] cumulate libfdisk-2.39.3-1.4 [ 30s] [63/105] cumulate libmagic-5.45-1.4 [ 30s] [64/105] cumulate libxml2-2.12.5-1.5 [ 30s] [65/105] cumulate xz-5.4.5-1.6 [ 30s] [66/105] cumulate perl-5.38.0-1.5 [ 30s] [67/105] cumulate build-mkbaselibs-20120927-1.1 [ 30s] [68/105] cumulate libstdc++-devel-14.2.0-1.6 [ 30s] [69/105] cumulate linux-glibc-devel-6.6-1.5 [ 30s] [70/105] cumulate binutils-2.43-1.6 [ 30s] [71/105] cumulate file-5.45-1.4 [ 30s] [72/105] cumulate tar-1.17-1.1 [ 30s] [73/105] cumulate terminfo-base-full-6.4-1.6 [ 30s] [74/105] cumulate autoconf-2.71-1.6 [ 30s] [75/105] cumulate glibc-locale-2.39-1.6 [ 30s] [76/105] cumulate gzip-1.3.12-1.4 [ 30s] [77/105] cumulate libcc1-14.2.0-1.6 [ 30s] [78/105] cumulate libubsan-14.2.0-1.6 [ 30s] [79/105] cumulate pam-1.1.6-1.4 [ 30s] [80/105] cumulate tzdata-2023c-1.1 [ 30s] [81/105] cumulate libdw-0.189-1.6 [ 30s] [82/105] cumulate libarchive-3.7.2-1.5 [ 30s] [83/105] cumulate automake-1.16.5-1.6 [ 30s] [84/105] cumulate libasm-0.189-1.6 [ 30s] [85/105] cumulate libncurses6-6.4-1.6 [ 30s] [86/105] cumulate build-20120927-1.1 [ 30s] [87/105] cumulate gcc-14.2.0-1.6 [ 30s] [88/105] cumulate libncurses-6.4-1.6 [ 30s] [89/105] cumulate less-643-1.1 [ 30s] [90/105] cumulate libreadline-5.2-1.5 [ 30s] [91/105] cumulate qemu-accel-x86_64-riscv64-0.4-1.1 [ 30s] [92/105] cumulate libtool-2.4.7-1.6 [ 30s] [93/105] cumulate elfutils-0.189-1.6 [ 30s] [94/105] cumulate python3-base-3.12.0-1.5 [ 30s] [95/105] cumulate util-linux-2.39.3-1.4 [ 30s] [96/105] cumulate python3-3.12.0-1.1 [ 30s] [97/105] cumulate util-linux-su-2.39.3-1.4 [ 30s] [98/105] cumulate python3-devel-3.12.0-1.5 [ 30s] [99/105] cumulate python3-setuptools-69.0.2-1.1 [ 30s] [100/105] cumulate libxcrypt-devel-4.4.36-1.5 [ 30s] [101/105] cumulate nss-3.98-1.6 [ 30s] [102/105] cumulate glibc-devel-2.39-1.6 [ 30s] [103/105] cumulate libsoftokn3-3.98-1.6 [ 30s] [104/105] cumulate rpm-4.14.1.1-1.6 [ 30s] [105/105] cumulate rpm-build-4.14.1.1-1.6 [ 30s] now installing cumulated packages [ 39s] Preparing... ######################################## [ 39s] Updating / installing... [ 39s] setup-0.9-1.11 ######################################## [ 39s] filesystem-3.1-1.1 ######################################## [ 39s] glibc-2.39-1.6 ######################################## [ 40s] bash-3.2.57-1.1 ######################################## [ 40s] zlib-1.3-1.5 ######################################## [ 42s] coreutils-6.9-14.9 ######################################## [ 42s] libbz2-1.0.8-1.5 ######################################## [ 43s] libgcc-14.2.0-1.6 ######################################## [ 43s] liblzma-5.4.5-1.6 ######################################## [ 44s] libstdc++-14.2.0-1.6 ######################################## [ 44s] libelf-0.189-1.6 ######################################## [ 44s] libxcrypt-4.4.36-1.5 ######################################## [ 45s] libdw-0.189-1.6 ######################################## [ 45s] libblkid-2.39.3-1.4 ######################################## [ 45s] nspr-4.35-1.4 ######################################## [ 46s] pam-1.1.6-1.4 ######################################## [ 46s] libcap-2.69-1.5 ######################################## [ 47s] gdbm-1.8.3-1.6 ######################################## [ 52s] perl-5.38.0-1.5 ######################################## [ 52s] libfreebl3-3.98-1.6 ######################################## [ 52s] liblua-5.1.5-1.4 ######################################## [ 53s] libopenssl3-3.0.13-1.6 ######################################## [ 53s] libpopt-1.16-1.4 ######################################## [ 54s] libpython3_121_0-3.12.0-1.5 ######################################## [ 54s] libsqlite-3.44.0-1.5 ######################################## [ 55s] libuuid-2.39.3-1.4 ######################################## [ 55s] libzstd1-1.5.5-1.5 ######################################## [ 56s] pkg-config-0.29.2-1.5 ######################################## [ 56s] libfdisk-2.39.3-1.4 ######################################## [ 56s] build-mkbaselibs-20120927-1.1 ######################################## [ 56s] nss-certs-3.98-1.6 ######################################## [ 56s] libsoftokn3-3.98-1.6 ######################################## [ 57s] nss-3.98-1.6 ######################################## [ 57s] libmount-2.39.3-1.4 ######################################## [ 57s] libasm-0.189-1.6 ######################################## [ 58s] libcc1-14.2.0-1.6 ######################################## [ 58s] libubsan-14.2.0-1.6 ######################################## [ 58s] libxml2-2.12.5-1.5 ######################################## [ 59s] xz-5.4.5-1.6 ######################################## [ 59s] libgfortran-14.2.0-1.6 ######################################## [ 59s] bzip2-1.0.8-1.5 ######################################## [ 60s] linux-glibc-devel-6.6-1.5 ######################################## [ 60s] terminfo-base-full-6.4-1.6 ######################################## [ 60s] libncurses6-6.4-1.6 ######################################## [ 61s] libreadline-5.2-1.5 ######################################## [ 61s] gzip-1.3.12-1.4 ######################################## [ 61s] binutils-libs-2.43-1.6 ######################################## [ 63s] binutils-2.43-1.6 ######################################## [ 63s] make-4.4-1.4 ######################################## [ 64s] findutils-4.3.8-1.4 ######################################## [ 64s] libatomic-14.2.0-1.6 ######################################## [ 64s] libattr-2.5.1-1.5 ######################################## [ 64s] libacl-2.3.2-1.4 ######################################## [ 65s] tar-1.17-1.1 ######################################## [ 65s] libarchive-3.7.2-1.5 ######################################## [ 65s] libexpat-2.6.2-1.5 ######################################## [ 65s] libffi-3.4.2-1.5 ######################################## [ 68s] python3-base-3.12.0-1.5 ######################################## [ 68s] python3-3.12.0-1.1 ######################################## [ 68s] libgomp-14.2.0-1.6 ######################################## [ 69s] libitm-14.2.0-1.6 ######################################## [ 77s] gcc-14.2.0-1.6 ######################################## [ 77s] libxcrypt-devel-4.4.36-1.5 ######################################## [ 77s] glibc-devel-2.39-1.6 ######################################## [ 77s] libltdl-2.4.7-1.6 ######################################## [ 77s] libpcre-8.45-1.4 ######################################## [ 78s] libsmack-1.3.1-1.4 ######################################## [ 78s] libsmartcols-2.39.3-1.4 ######################################## [ 78s] m4-1.4.19-1.1 ######################################## [ 78s] autoconf-2.71-1.6 ######################################## [ 79s] automake-1.16.5-1.6 ######################################## [ 79s] patch-2.7.6-1.4 ######################################## [ 79s] sed-4.1c-1.4 ######################################## [ 81s] util-linux-2.39.3-1.4 ######################################## [ 81s] libmagic-data-5.45-1.4 ######################################## [ 81s] libmagic-5.45-1.4 ######################################## [ 83s] rpm-4.14.1.1-1.6 ######################################## [ 83s] rpm-build-4.14.1.1-1.6 ######################################## [ 83s] file-5.45-1.4 ######################################## [ 83s] util-linux-su-2.39.3-1.4 ######################################## [ 83s] libtool-2.4.7-1.6 ######################################## [ 83s] smack-1.3.1-1.4 ######################################## [ 84s] grep-2.5.2-1.4 ######################################## [ 108s] qemu-accel-x86_64-riscv64-0.4-1.1 ######################################## [ 109s] python3-setuptools-69.0.2-1.1 ######################################## [ 110s] python3-devel-3.12.0-1.5 ######################################## [ 110s] build-20120927-1.1 ######################################## [ 110s] libncurses-6.4-1.6 ######################################## [ 110s] less-643-1.1 ######################################## [ 110s] elfutils-0.189-1.6 ######################################## [ 111s] libstdc++-devel-14.2.0-1.6 ######################################## [ 112s] glibc-locale-2.39-1.6 ######################################## [ 113s] tzdata-2023c-1.1 ######################################## [ 115s] cpp-14.2.0-1.6 ######################################## [ 118s] gcc-c++-14.2.0-1.6 ######################################## [ 118s] build-compare-2023.06.18-1.11 ######################################## [ 118s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 123s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 124s] gawk-3.1.5-1.2 ######################################## [ 124s] cpio-2.8-1.2 ######################################## [ 125s] diffutils-3.10-1.1 ######################################## [ 125s] hostname-3.23-1.2 ######################################## [ 125s] net-tools-2.0_20121208git-1.3 ######################################## [ 125s] update-alternatives-1.22.2-1.1 ######################################## [ 125s] which-2.17-1.2 ######################################## [ 126s] now finalizing build dir... [ 127s] ----------------------------------------------------------------- [ 127s] I have the following modifications for python3-nose.spec: [ 127s] 4c4 [ 127s] < Release: 0 [ 127s] --- [ 127s] > Release: 1.1 [ 127s] build target is riscv64-tizen-linux [ 127s] ----------------------------------------------------------------- [ 127s] ----- building python3-nose.spec (user abuild) [ 127s] ----------------------------------------------------------------- [ 127s] ----------------------------------------------------------------- [ 127s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=riscv64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/21fabebcca7f55a09c8b45ef1a2586c3-python3-nose' /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 127s] Building target platforms: riscv64-tizen-linux [ 127s] Building for target riscv64-tizen-linux [ 127s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.sHTPGq [ 127s] + umask 022 [ 127s] + cd /home/abuild/rpmbuild/BUILD [ 127s] + cd /home/abuild/rpmbuild/BUILD [ 127s] + rm -rf nose-1.2.1 [ 127s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/nose-1.2.1.tar.gz [ 127s] + /bin/tar -xof - [ 127s] + STATUS=0 [ 128s] + '[' 0 -ne 0 ']' [ 128s] + cd nose-1.2.1 [ 128s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 128s] + cp /home/abuild/rpmbuild/SOURCES/python3-nose.manifest . [ 128s] + sed -i s,man/man1,share/man/man1, setup.py [ 128s] + exit 0 [ 128s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.imtQal [ 128s] + umask 022 [ 128s] + cd /home/abuild/rpmbuild/BUILD [ 128s] + cd nose-1.2.1 [ 128s] + ref=/usr/lib/rpm [ 128s] + mints=0 [ 128s] + case $(uname -m) in [ 128s] ++ uname -m [ 128s] + mints=20160911 [ 128s] + for s in guess sub [ 128s] ++ find -maxdepth 8 -name config.guess [ 128s] + for s in guess sub [ 128s] ++ find -maxdepth 8 -name config.sub [ 128s] + LANG=C [ 128s] + export LANG [ 128s] + unset DISPLAY [ 128s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 128s] + export CFLAGS [ 128s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 128s] + export CXXFLAGS [ 128s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 128s] + export FFLAGS [ 128s] + LDFLAGS= [ 128s] + export LDFLAGS [ 128s] + /usr/bin/python3 setup.py build [ 128s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:53: SyntaxWarning: invalid escape sequence '\(' [ 128s] "sys.exit\(\n" [ 128s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:54: SyntaxWarning: invalid escape sequence '\(' [ 128s] " load_entry_point\(([^\)]+)\)\(\)\n" [ 128s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:55: SyntaxWarning: invalid escape sequence '\)' [ 128s] "\)\n") [ 130s] + exit 0 [ 130s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.QLHdQX [ 130s] + umask 022 [ 130s] + cd /home/abuild/rpmbuild/BUILD [ 130s] + cd nose-1.2.1 [ 130s] + LANG=C [ 130s] + export LANG [ 130s] + unset DISPLAY [ 130s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 [ 130s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 [ 130s] + /usr/bin/python3 setup.py install --prefix=/usr --root=/home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 [ 130s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:53: SyntaxWarning: invalid escape sequence '\(' [ 130s] "sys.exit\(\n" [ 130s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:54: SyntaxWarning: invalid escape sequence '\(' [ 130s] " load_entry_point\(([^\)]+)\)\(\)\n" [ 130s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:55: SyntaxWarning: invalid escape sequence '\)' [ 130s] "\)\n") [ 131s] /usr/lib/python3.12/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. [ 131s] !! [ 131s] [ 131s] ******************************************************************************** [ 131s] Please avoid running ``setup.py`` directly. [ 131s] Instead, use pypa/build, pypa/installer or other [ 131s] standards-based tools. [ 131s] [ 131s] See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. [ 131s] ******************************************************************************** [ 131s] [ 131s] !! [ 131s] self.initialize_options() [ 131s] File "/usr/lib/python3.12/site-packages/nose/ext/dtcompat.py", line 344 [ 131s] raise TypeError, 'Expected a module: %r' % module [ 131s] ^ [ 131s] SyntaxError: invalid syntax [ 131s] [ 131s] File "/usr/lib/python3.12/site-packages/nose/failure.py", line 37 [ 131s] raise self.exc_class, self.exc_val, self.tb [ 131s] ^ [ 131s] SyntaxError: invalid syntax [ 131s] [ 131s] File "/usr/lib/python3.12/site-packages/nose/twistedtools.py", line 169 [ 131s] raise exc_type, exc_value, tb [ 131s] ^ [ 131s] SyntaxError: invalid syntax [ 131s] [ 131s] File "/usr/lib/python3.12/site-packages/nose/inspector.py", line 41 [ 131s] except tokenize.TokenError, e: [ 131s] ^^^^^^^^^^^^^^^^^^^^^^ [ 131s] SyntaxError: multiple exception types must be parenthesized [ 131s] [ 131s] File "/usr/lib/python3.12/site-packages/nose/core.py", line 143 [ 131s] print "%s version %s" % (os.path.basename(sys.argv[0]), __version__) [ 131s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 131s] SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)? [ 131s] [ 132s] File "/usr/lib/python3.12/site-packages/nose/plugins/plugintest.py", line 407 [ 132s] print munge_nose_output_for_doctest(out) [ 132s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 132s] SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)? [ 132s] [ 132s] File "/usr/lib/python3.12/site-packages/nose/plugins/doctests.py", line 277 [ 132s] except ImportError, e: [ 132s] ^^^^^^^^^^^^^^ [ 132s] SyntaxError: multiple exception types must be parenthesized [ 132s] [ 132s] File "/usr/lib/python3.12/site-packages/nose/plugins/multiprocess.py", line 466 [ 132s] except (KeyboardInterrupt, SystemExit), e: [ 132s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 132s] SyntaxError: multiple exception types must be parenthesized [ 132s] [ 132s] File "/usr/lib/python3.12/site-packages/nose/plugins/manager.py", line 390 [ 132s] except Exception, e: [ 132s] ^^^^^^^^^^^^ [ 132s] SyntaxError: multiple exception types must be parenthesized [ 132s] [ 132s] File "/usr/lib/python3.12/site-packages/nose/plugins/base.py", line 70 [ 132s] except OptionConflictError, e: [ 132s] ^^^^^^^^^^^^^^^^^^^^^^ [ 132s] SyntaxError: multiple exception types must be parenthesized [ 132s] [ 132s] File "/usr/lib/python3.12/site-packages/nose/config.py", line 66 [ 132s] except ConfigParser.Error, exc: [ 132s] ^^^^^^^^^^^^^^^^^^^^^^^ [ 132s] SyntaxError: multiple exception types must be parenthesized [ 132s] [ 133s] no previously-included directories found matching 'doc/.build' [ 134s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.2.1-1.1 --unique-debug-src-base python3-nose-1.2.1-1.1.riscv64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/nose-1.2.1 [ 134s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/nose-1.2.1/python3-nose-debuginfo.manifest [ 134s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/nose-1.2.1/python3-nose-debugsource.manifest [ 134s] + /usr/lib/rpm/check-buildroot [ 134s] + /usr/lib/rpm//brp-compress [ 134s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 134s] + /usr/lib/rpm/brp-python-hardlink [ 137s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 [ 137s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/nose-1.2.1/isu.list [ 137s] ~/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 ~/rpmbuild/BUILD/nose-1.2.1 [ 137s] ~/rpmbuild/BUILD/nose-1.2.1 [ 137s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 138s] error: Unable to open /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 138s] /home/abuild/rpmbuild/SOURCES/python-nose.spec: No such file or directory [ 138s] error: query of specfile /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 138s] /home/abuild/rpmbuild/SOURCES/python-nose.spec failed, can't parse [ 138s] error: Unable to open /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 138s] /home/abuild/rpmbuild/SOURCES/python-nose.spec: No such file or directory [ 138s] error: query of specfile /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 138s] /home/abuild/rpmbuild/SOURCES/python-nose.spec failed, can't parse [ 138s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.8Xz0z7 [ 138s] + umask 022 [ 138s] + cd /home/abuild/rpmbuild/BUILD [ 138s] + cd nose-1.2.1 [ 138s] + exit 0 [ 138s] Processing files: python3-nose-1.2.1-1.1.noarch [ 138s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 138s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 138s] [ 138s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.v4b5YK [ 138s] + umask 022 [ 138s] + cd /home/abuild/rpmbuild/BUILD [ 138s] + cd nose-1.2.1 [ 138s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64/usr/share/doc/packages/python3-nose [ 138s] + export LC_ALL=C [ 138s] + LC_ALL=C [ 138s] + export DOCDIR [ 138s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64/usr/share/doc/packages/python3-nose [ 138s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64/usr/share/doc/packages/python3-nose [ 138s] + cp -pr README.txt /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64/usr/share/doc/packages/python3-nose [ 138s] + cp -pr lgpl.txt /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64/usr/share/doc/packages/python3-nose [ 138s] + exit 0 [ 139s] Provides: python3-nose = 1.2.1-1.1 [ 139s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 139s] Requires: /usr/bin/python3 [ 139s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 [ 139s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-nose-1.2.1-1.1.src.rpm [ 139s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-nose-1.2.1-1.1.noarch.rpm [ 139s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.dAeabu [ 139s] + umask 022 [ 139s] + cd /home/abuild/rpmbuild/BUILD [ 139s] + cd nose-1.2.1 [ 139s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.riscv64 [ 139s] + exit 0 [ 139s] ... checking for files with abuild user/group [ 139s] ... creating baselibs [ 140s] [ 140s] 86c5bb0bb39f finished "build python3-nose.spec" at Fri Dec 13 09:11:40 UTC 2024. [ 140s]