# packages

pkgId: 2ad5086b14ce3fc5f6e94038863b8f142b12e91b6b00f81aedb9e2aa2e8a64c7
name: perl-Class-Inspector
arch: armv7l
version: 1.36
epoch: 0
release: 0
summary: Get information about a class and its structure
url: https://metacpan.org/pod/Class::Inspector
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Class-Inspector-1.36-0.src.rpm
location_href: armv7l/perl-Class-Inspector-1.36-0.armv7l.rpm
checksum_type: sha256
description:
  Class::Inspector allows you to get information about a loaded class.
  Most or all of this information can be found in other ways,
  but they aren't always very friendly, and usually involve a relatively
  high level of Perl wizardry, or strange and unusual looking code.
  Class::Inspector attempts to provide an easier,
  more friendly interface to this information.


pkgId: 524f98df92a7d50e8a80ef9c76d4a8482c81068a87a1796fdded62bcc4296f64
name: perl-Class-Singleton
arch: armv7l
version: 1.6
epoch: 0
release: 0
summary: Implementation of a "Singleton" class
url: https://metacpan.org/pod/Class::Singleton
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Class-Singleton-1.6-0.src.rpm
location_href: armv7l/perl-Class-Singleton-1.6-0.armv7l.rpm
checksum_type: sha256
description:
  This is the Class::Singleton module. A Singleton describes
  an object class that can have only one instance in any system.
  An example of a Singleton might be a print spooler or
  system registry. This module implements a Singleton class
  from which other classes can be derived. By itself,
  the Class::Singleton module does very little other than manage
  the instantiation of a single object. In deriving a class
  from Class::Singleton, your module will inherit the Singleton
  instantiation method and can implement whatever specific
  functionality is required.

  For a description and discussion of the Singleton class,
  see "Design Patterns", Gamma et al, Addison-Wesley, 1995, ISBN 0-201-63361-2.


pkgId: ba2ca78bf70bcb70968ee205210f43688f9eca147167c2b6f6d3cf5080254b65
name: perl-DateTime
arch: armv7l
version: 1.65
epoch: 0
release: 0
summary: A date and time object for Perl
url: https://metacpan.org/pod/DateTime
rpm_license: Artistic License 2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-DateTime-1.65-0.src.rpm
location_href: armv7l/perl-DateTime-1.65-0.armv7l.rpm
checksum_type: sha256
description:
  DateTime is a class for the representation of date/time
  combinations, and is part of the Perl DateTime project.
  It represents the Gregorian calendar, extended backwards
  in time before its creation (in 1582). This is sometimes
  known as the "proleptic Gregorian calendar". In this calendar,
  the first day of the calendar (the epoch),
  is the first day of year 1, which corresponds to the date which
  was (incorrectly) believed to be the birth of Jesus Christ.
  The calendar represented does have a year 0, and in that way differs
  from how dates are often written using "BCE/CE" or "BC/AD".
  For infinite datetimes, please see the DateTime::Infinite module.


pkgId: b2a106f87fa480e383cbbdaf49136c1f82566f6c350db3aaf1ed10ce50fc6772
name: perl-DateTime-Locale
arch: armv7l
version: 1.44
epoch: 0
release: 1
summary: Class for locale objects instantiated from pre-defined data
url: https://metacpan.org/pod/DateTime::Locale::FromData
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-DateTime-Locale-1.44-1.src.rpm
location_href: armv7l/perl-DateTime-Locale-1.44-1.armv7l.rpm
checksum_type: sha256
description:
  This class is used to represent locales instantiated
  from the data in the DateTime::Locale::Data module.


pkgId: accd5b84a9ccbebe2979ed2bfc2678b721286fe525e3e8f2465749ea62f3f073
name: perl-DateTime-TimeZone
arch: armv7l
version: 2.63
epoch: 0
release: 1
summary: Time zone object base class and factory
url: https://metacpan.org/pod/DateTime::TimeZone
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-DateTime-TimeZone-2.63-1.src.rpm
location_href: armv7l/perl-DateTime-TimeZone-2.63-1.armv7l.rpm
checksum_type: sha256
description:
  This class is the base class for all time zone objects.
  A time zone is represented internally as a set of observances,
  each of which describes the offset from GMT for a given time period.

  Note that without the DateTime module, this module does not do much.
  It's primary interface is through a DateTime object,
  and most users will not need to directly use DateTime::TimeZone methods.


pkgId: e0d6af53f62a4b3d113c42caed3a5247dbc6ac16e0b157b2861d4a0f05db1b96
name: perl-Devel-StackTrace
arch: armv7l
version: 2.05
epoch: 0
release: 1
summary: An object representing a stack trace
url: https://metacpan.org/pod/Devel::StackTrace
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Devel-StackTrace-2.05-1.src.rpm
location_href: armv7l/perl-Devel-StackTrace-2.05-1.armv7l.rpm
checksum_type: sha256
description:
  The Devel::StackTrace module contains two classes,
  Devel::StackTrace and Devel::StackTrace::Frame. These
  objects encapsulate the information that can
  retrieved via Perl's caller function, as well as
  providing a simple interface to this data.

  The Devel::StackTrace object contains a set of
  Devel::StackTrace::Frame objects, one for each
  level of the stack. The frames contain all the
  data available from caller.
  This code was created to support my
  Exception::Class::Base class (part of
  Exception::Class) but may be useful in other contexts.


pkgId: 0b25ec1ae66a407fa14c04951fcbf06cfd357dc6a90fed468389436de17b639d
name: perl-Error
arch: noarch
version: 0.17030
epoch: 0
release: 0
summary: Error/exception handling in an OO-ish way
url: http://search.cpan.org/dist/Error/
rpm_license: GPL-1.0 or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-Error-0.17030-0.src.rpm
location_href: noarch/perl-Error-0.17030-0.noarch.rpm
checksum_type: sha256
description:
  The 'Error' package provides two interfaces. Firstly 'Error' provides a
  procedural interface to exception handling. Secondly 'Error' is a base
  class for errors/exceptions that can either be thrown, for subsequent
  catch, or can simply be recorded.

  Errors in the class 'Error' should not be thrown directly, but the user
  should throw errors from a sub-class of 'Error'.


pkgId: f5f515e8ba8bdc2737146c57461b91bc0fe3204b1f56cd5ba527b9ef47cbc53d
name: perl-Eval-Closure
arch: armv7l
version: 0.14
epoch: 0
release: 1
summary: safely and cleanly create closures via string eval
url: https://metacpan.org/pod/Eval::Closure
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Eval-Closure-0.14-1.src.rpm
location_href: armv7l/perl-Eval-Closure-0.14-1.armv7l.rpm
checksum_type: sha256
description:
  String eval is often used for dynamic code generation.
  For instance, Moose uses it heavily, to generate inlined
  versions of accessors and constructors, which speeds code up
  at runtime by a significant amount. String eval is not without
  its issues however - it's difficult to control the scope it's
  used in (which determines which variables are in scope inside the eval),
  and it's easy to miss compilation errors, since eval catches
  them and sticks them in $@ instead.

  This module attempts to solve these problems. It provides an
  eval_closure function, which evals a string in a clean environment,
  other than a fixed list of specified variables. Compilation errors
  are rethrown automatically.


pkgId: f29bc23e5f661667ec3f5de90dab6ab03320475d819c279b5123ec7faaf9eae1
name: perl-Exception-Class
arch: armv7l
version: 1.45
epoch: 0
release: 1
summary: A module that allows you to declare real exception classes in Perl
url: https://metacpan.org/pod/Exception::Class
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Exception-Class-1.45-1.src.rpm
location_href: armv7l/perl-Exception-Class-1.45-1.armv7l.rpm
checksum_type: sha256
description:
  RECOMMENDATION 1: If you are writing modern Perl
  code with Moose or Moo I highly recommend using Throwable
  instead of this module.
  RECOMMENDATION 2: Whether or not you use Throwable,
  you should use Try::Tiny.
  Exception::Class allows you to declare exception
  hierarchies in your modules in a "Java-esque" manner.
  It features a simple interface allowing programmers to 'declare'
  1exception classes at compile time. It also has a base exception
  class, Exception::Class::Base, that can be easily extended.
  It is designed to make structured exception handling simpler
  and better by encouraging people to use hierarchies of exceptions
  in their applications, as opposed to a single catch-all exception class.
  This module does not implement any try/catch syntax. Please see the
  "OTHER EXCEPTION MODULES (try/catch syntax)" section for more
  information on how to get this syntax.
  You will also want to look at the documentation for
  Exception::Class::Base, which is the default base class for
  all exception objects created by this module.


pkgId: d3937813d1127c08a9fcc5b9924bcab70de7e3509dce3f40e561197e7dfacfbd
name: perl-FFI-CheckLib
arch: armv7l
version: 0.31
epoch: 0
release: 0
summary: Check that a library is available for FFI
url: https://metacpan.org/release/FFI-CheckLib
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-FFI-CheckLib-0.31-0.src.rpm
location_href: armv7l/perl-FFI-CheckLib-0.31-0.armv7l.rpm
checksum_type: sha256
description:
  This module checks whether a particular dynamic library is available for
  FFI to use. It is modeled heavily on Devel::CheckLib, but will find dynamic
  libraries even when development packages are not installed. It also
  provides a find_lib function that will return the full path to the found
  dynamic library, which can be feed directly into FFI::Platypus or another
  FFI system.


pkgId: efeef7191065375380f45c6157ff30ba264338a387e5e0fa410c91e42a4dc24b
name: perl-File-ShareDir
arch: armv7l
version: 1.118
epoch: 0
release: 1
summary: Locate per-dist and per-module shared files
url: https://metacpan.org/pod/File::ShareDir
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-File-ShareDir-1.118-1.src.rpm
location_href: armv7l/perl-File-ShareDir-1.118-1.armv7l.rpm
checksum_type: sha256
description:
  The intent of File::ShareDir is to provide a companion to Class::Inspector
  and File::HomeDir, modules that take a process that is well-known
  by advanced Perl developers but gets a little tricky,
  and make it more available to the larger Perl community.

  Quite often you want or need your Perl module (CPAN or otherwise)
  to have access to a large amount of read-only data that is stored
  on the file-system at run-time.

  On a linux-like system, this would be in a place such as /usr/share,
  however Perl runs on a wide variety of different systems,
  and so the use of any one location is unreliable.

  Perl provides a little-known method for doing this,
  but almost nobody is aware that it exists. As a result, module authors
  often go through some very strange ways to make the data available to their code.

  The most common of these is to dump the data out to an enormous
  Perl data structure and save it into the module itself.
  The result are enormous multi-megabyte .pm files
  that chew up a lot of memory needlessly.

  Another method is to put the data "file" after the __DATA__
  compiler tag and limit yourself to access as a filehandle.

  The problem to solve is really quite simple.

   1. Write the data files to the system at install time.
   2. Know where you put them at run-time.

  Perl's install system creates an "auto" directory
  for both every distribution and for every module file.

  These are used by a couple of different auto-loading systems
  to store code fragments generated at install time,
  and various other modules written by the Perl "ancient masters".

  But the same mechanism is available to any dist or module to store any sort of data.


pkgId: e58c5ed4fbed97978b8fd3741ce0ff168db37f96bb9a4e7dbfcbc31efa6cb8fa
name: perl-File-ShareDir-Install
arch: armv7l
version: 0.14
epoch: 0
release: 1
summary: Install shared files
url: https://metacpan.org/pod/File::ShareDir::Install
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-File-ShareDir-Install-0.14-1.src.rpm
location_href: armv7l/perl-File-ShareDir-Install-0.14-1.armv7l.rpm
checksum_type: sha256
description:
  File::ShareDir::Install allows you to install read-only data
  files from a distribution. It is a companion module to File::ShareDir,
  which allows you to locate these files after installation.

  It is a port of Module::Install::Share to ExtUtils::MakeMaker
  with the improvement of only installing the files you want;
  .svn, .git and other source-control junk will be ignored.

  Please note that this module installs read-only data files;
  empty directories will be ignored.


pkgId: f8bd4ea08ac7db0f0c5b7c161b520d3b994704ab18b22669308bc4b6d4e25850
name: perl-File-Which
arch: armv7l
version: 1.27
epoch: 0
release: 0
summary: Perl implementation of the which utility as an API
url: https://metacpan.org/release/File-Which
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-File-Which-1.27-0.src.rpm
location_href: armv7l/perl-File-Which-1.27-0.armv7l.rpm
checksum_type: sha256
description:
  File::Which finds the full or relative paths to executable programs on the
  system. This is normally the function of 'which' utility. 'which' is
  typically implemented as either a program or a built in shell command. On
  some platforms, such as Microsoft Windows it is not provided as part of the
  core operating system. This module provides a consistent API to this
  functionality regardless of the underlying platform.

  The focus of this module is correctness and portability. As a consequence
  platforms where the current directory is implicitly part of the search path
  such as Microsoft Windows will find executables in the current directory,
  whereas on platforms such as UNIX where this is not the case executables in
  the current directory will only be found if the current directory is
  explicitly added to the path.

  If you need a portable 'which' on the command line in an environment that
  does not provide it, install App::pwhich which provides a command line
  interface to this API.


pkgId: 52e386361feaa50033d01a4c381dc0d3cb160cb0df6bbde3746176027cd1f080
name: perl-File-chdir
arch: armv7l
version: 0.1011
epoch: 0
release: 0
summary: More sensible way to change directories
url: https://metacpan.org/release/File-chdir
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-File-chdir-0.1011-0.src.rpm
location_href: armv7l/perl-File-chdir-0.1011-0.armv7l.rpm
checksum_type: sha256
description:
  Perl's 'chdir()' has the unfortunate problem of being very, very, very
  global. If any part of your program calls 'chdir()' or if any library you
  use calls 'chdir()', it changes the current working directory for the
  *whole* program.

  This sucks.

  File::chdir gives you an alternative, '$CWD' and '@CWD'. These two
  variables combine all the power of 'chdir()', File::Spec and Cwd.


pkgId: 7a699809a72dd218fa2adcdc57778900adeac0bea27e84d4f820f5c917135dbb
name: perl-JSON-PP
arch: armv7l
version: 4.16
epoch: 0
release: 1
summary: JSON::PP - JSON::XS compatible pure-Perl module.
url: https://metacpan.org/pod/JSON::PP
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-JSON-PP-4.16-1.src.rpm
location_href: armv7l/perl-JSON-PP-4.16-1.armv7l.rpm
checksum_type: sha256
description:
  JSON::PP is a pure perl JSON decoder/encoder, and (almost) compatible
  to much faster JSON::XS written by Marc Lehmann in C.
  JSON::PP works as a fallback module when you use JSON module
  without having installed JSON::XS.

  Because of this fallback feature of JSON.pm,
  JSON::PP tries not to be more JavaScript-friendly than JSON::XS
  (i.e. not to escape extra characters such as U+2028 and U+2029, etc),
  in order for you not to lose such JavaScript-friendliness silently
  when you use JSON.pm and install JSON::XS for speed or by accident.
  If you need JavaScript-friendly RFC7159-compliant pure perl module,
  try JSON::Tiny, which is derived from Mojolicious web framework and
  is also smaller and faster than JSON::PP.

  JSON::PP has been in the Perl core since Perl 5.14, mainly
  for CPAN toolchain modules to parse META.json.


pkgId: f0bb731897483bd951a4c13ab25a395593685ede7413399ae577e793c967509a
name: perl-MRO-Compat
arch: armv7l
version: 0.15
epoch: 0
release: 1
summary: Routines for manipulating stashes
url: https://metacpan.org/pod/MRO::Compat
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-MRO-Compat-0.15-1.src.rpm
location_href: armv7l/perl-MRO-Compat-0.15-1.armv7l.rpm
checksum_type: sha256
description:
  The "mro" namespace provides several utilities for dealing
  with method resolution order and method caching in general
  in Perl 5.9.5 and higher.
  This module provides those interfaces for earlier
  versions of Perl (back to 5.6.0 anyways).

  It is a harmless no-op to use this module on 5.9.5+.
  That is to say, code which properly uses MRO::Compat
  will work unmodified on both older Perls and 5.9.5+.

  If you're writing a piece of software that would like
  to use the parts of 5.9.5+'s mro:: interfaces that are
  supported here, and you want compatibility
  with older Perls, this is the module for you.

  Some parts of this code will work better and/or faster
  with Class::C3::XS installed (which is an optional
  prereq of Class::C3, which is in turn a prereq of
  this package), but it's not a requirement.

  This module never exports any functions.
  All calls must be fully qualified with the mro:: prefix.

  The interface documentation here serves only as a quick
  reference of what the function basically does, and what
  differences between MRO::Compat and 5.9.5+ one should look out for.
  The main docs in 5.9.5's mro are the real interface docs,
  and contain a lot of other useful information.


pkgId: 79cf8efc239bcda9a0f33778968b2b96a89508d5af5ba69db0f0f53e15ee4686
name: perl-Module-Runtime
arch: armv7l
version: 0.016
epoch: 0
release: 1
summary: runtime module handling
url: https://metacpan.org/pod/Module::Runtime
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Module-Runtime-0.016-1.src.rpm
location_href: armv7l/perl-Module-Runtime-0.016-1.armv7l.rpm
checksum_type: sha256
description:
  The functions exported by this module deal with runtime handling of Perl modules,
  which are normally handled at compile time. This module avoids using any other modules,
  so that it can be used in low-level infrastructureb.

  The parts of this module that work with module names apply the same syntax
  that is used for barewords in Perl source. In principle this syntax can
  vary between versions of Perl, and this module applies the syntax of
  the Perl on which it is running. In practice the usable syntax hasn't changed yet.
  There's some intent for Unicode module names to be supported in the future,
  but this hasn't yet amounted to any consistent facility.

  The functions of this module whose purpose is to load modules include workarounds
  for three old Perl core bugs regarding require. These workarounds are applied on any Perl version
  where the bugs exist, except for a case where one of the bugs cannot be adequately worked around in pure Perl.


pkgId: 9205535896eeaed74db2b3ed8f3808624ad20ccb3d35f996160043a9c0a93d76
name: perl-Net-DBus
arch: armv7l
version: 1.2.0
epoch: 0
release: 1
summary: Perl extension for the DBus message system
url: http://search.cpan.org/dist/Net-DBus/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Net-DBus-1.2.0-1.src.rpm
location_href: armv7l/perl-Net-DBus-1.2.0-1.armv7l.rpm
checksum_type: sha256
description:
  Net::DBus provides a Perl API for the DBus message system. The DBus Perl
  interface is currently operating against the 0.32 development version of
  DBus, but should work with later versions too, providing the API changes
  have not been too drastic.

  Users of this package are either typically, service providers in which case
  the the Net::DBus::Service manpage and the Net::DBus::Object manpage
  modules are of most relevance, or are client consumers, in which case the
  Net::DBus::RemoteService manpage and the Net::DBus::RemoteObject manpage
  are of most relevance.


pkgId: bed158f72dbd8db2cf4e4927222328d0138cd99386dcb6d5d0dea109622cf76c
name: perl-Package-Stash
arch: armv7l
version: 0.40
epoch: 0
release: 1
summary: Routines for manipulating stashes
url: https://metacpan.org/pod/Package::Stash
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Package-Stash-0.40-1.src.rpm
location_href: armv7l/perl-Package-Stash-0.40-1.armv7l.rpm
checksum_type: sha256
description:
  Manipulating stashes (Perl's symbol tables) is occasionally
  necessary, but incredibly messy, and easy to get wrong.
  This module hides all of that behind a simple API.

  NOTE: Most methods in this class require a variable specification
  that includes a sigil. If this sigil is absent, it is assumed
  to represent the IO slot.

  Due to limitations in the typeglob API available to perl code,
  and to typeglob manipulation in perl being quite slow, this module
  provides two implementations - one in pure perl, and one using XS.
  The XS implementation is to be preferred for most usages; the pure
  perl one is provided for cases where XS modules are not a possibility.
  The current implementation in use can be set by setting
  $ENV{PACKAGE_STASH_IMPLEMENTATION} or $Package::Stash::IMPLEMENTATION
  before loading Package::Stash (with the environment variable
  taking precedence), otherwise, it will use the XS implementation
  if possible, falling back to the pure perl one.


pkgId: 1d15f81f6a4c6ef4debd59242a8623cc4f7aa9c01c067637097ce5a0a4f2af87
name: perl-Params-ValidationCompiler
arch: armv7l
version: 0.31
epoch: 0
release: 1
summary: Build an optimized subroutine parameter validator once, use it forever
url: https://metacpan.org/pod/Params::ValidationCompiler
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Params-ValidationCompiler-0.31-1.src.rpm
location_href: armv7l/perl-Params-ValidationCompiler-0.31-1.armv7l.rpm
checksum_type: sha256
description:
  This module creates a customized, highly efficient
  parameter checking subroutine. It can handle named
  or positional parameters, and can return the
  parameters as key/value pairs or a list of values.

  In addition to type checks, it also supports
  parameter defaults, optional parameters, and
  extra "slurpy" parameters.


pkgId: 8171b8cded71e5571d6d41edd4bbbb875a082cd59e0b2a2fd70afeb10464109c
name: perl-Path-Tiny
arch: armv7l
version: 0.150
epoch: 0
release: 0
summary: File path utility
url: https://metacpan.org/release/Path-Tiny
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Path-Tiny-0.150-0.src.rpm
location_href: armv7l/perl-Path-Tiny-0.150-0.armv7l.rpm
checksum_type: sha256
description:
  This module provides a small, fast utility for working with file paths. It
  is friendlier to use than File::Spec and provides easy access to functions
  from several other core file handling modules. It aims to be smaller and
  faster than many alternatives on CPAN, while helping people do many common
  things in consistent and less error-prone ways.

  Path::Tiny does not try to work for anything except Unix-like and Win32
  platforms. Even then, it might break if you try something particularly
  obscure or tortuous. (Quick! What does this mean:
  '///../../..//./././a//b/.././c/././'? And how does it differ on Win32?)

  All paths are forced to have Unix-style forward slashes. Stringifying the
  object gives you back the path (after some clean up).

  File input/output methods 'flock' handles before reading or writing, as
  appropriate (if supported by the platform and/or filesystem).

  The '*_utf8' methods ('slurp_utf8', 'lines_utf8', etc.) operate in raw
  mode. On Windows, that means they will not have CRLF translation from the
  ':crlf' IO layer. Installing Unicode::UTF8 0.58 or later will speed up
  '*_utf8' situations in many cases and is highly recommended. Alternatively,
  installing PerlIO::utf8_strict 0.003 or later will be used in place of the
  default ':encoding(UTF-8)'.

  This module depends heavily on PerlIO layers for correct operation and thus
  requires Perl 5.008001 or later.


pkgId: bf65e60bf835d305d514c47ad115a70ed366d63fccbe5a11b933071affed469c
name: perl-Specio
arch: armv7l
version: 0.48
epoch: 0
release: 1
summary: Base class for type libraries
url: https://metacpan.org/pod/Specio::Exporter
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Specio-0.48-1.src.rpm
location_href: armv7l/perl-Specio-0.48-1.armv7l.rpm
checksum_type: sha256
description:
  Inheriting from this package makes your package a type exporter.
  By default, types defined in a package are never visible outside
  of the package. When you inherit from this package, all the types
  you define internally become available via exports.

  The exported types are available through the importing package's t subroutine.

  By default, types your package imports are not re-exported:

   package MyApp::Type::Library;

   use parent 'Specio::Exporter';

   use Specio::Declare;
   use Specio::Library::Builtins;

  In this case, the types provided by Specio::Library::Builtins are not
  exported to packages which use MyApp::Type::Library.

  You can explicitly ask for types to be re-exported:

    package MyApp::Type::Library;

    use parent 'Specio::Exporter';

    use Specio::Declare;
    use Specio::Library::Builtins -reexport;

  In this case, packages which use MyApp::Type::Library will get
  all the types from Specio::Library::Builtins as well as any
  types defined in MyApp::Type::Library.


pkgId: 6d9d1bbb6fff02701201e71fa91d3a475ae8b03e7c7f59c7006e6e22866a34cb
name: perl-Sub-Exporter-Progressive
arch: armv7l
version: 0.001013
epoch: 0
release: 1
summary: Only use Sub::Exporter if you need it
url: https://metacpan.org/pod/Sub::Exporter::Progressive
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Sub-Exporter-Progressive-0.001013-1.src.rpm
location_href: armv7l/perl-Sub-Exporter-Progressive-0.001013-1.armv7l.rpm
checksum_type: sha256
description:
  Sub::Exporter is an incredibly powerful module, but with that power
  comes great responsibility, er- as well as some runtime penalties.
  This module is a Sub::Exporter wrapper that will let your users just
  use Exporter if all they are doing is picking exports, but use Sub::Exporter
  if your users try to use Sub::Exporter's more advanced features,
  like renaming exports, if they try to use them.

  Note that this module will export @EXPORT, @EXPORT_OK and %EXPORT_TAGS
  package variables for Exporter to work. Additionally, if your package
  uses advanced Sub::Exporter features like currying, this module will
  only ever use Sub::Exporter, so you might as well use it directly.


pkgId: ce4841ec0a843f8107fbb12d14ca2fa187cfd14656c39fc8dc52898dd3b78d83
name: perl-Sub-Identify
arch: armv7l
version: 0.14
epoch: 0
release: 1
summary: Retrieve names of code references
url: https://metacpan.org/pod/Sub::Identify
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Sub-Identify-0.14-1.src.rpm
location_href: armv7l/perl-Sub-Identify-0.14-1.armv7l.rpm
checksum_type: sha256
description:
  Sub::Identify allows you to retrieve the real name of code references.
  It provides six functions, all of them taking a code reference.
  sub_name returns the name of the code reference passed as an argument
  (or __ANON__ if it's an anonymous code reference), stash_name
  returns its package, and sub_fullname returns the concatenation of the two.

  get_code_info
  returns a list of two elements, the package and the subroutine name
  (in case of you want both and are worried by the speed.)

  In case of subroutine aliasing, those functions always return the original name.
  get_code_location returns a two-element list containing the file name
  and the line number where the subroutine has been defined.

  is_sub_constant returns a boolean value indicating whether
  the subroutine is a constant or not.


pkgId: 462a6a54ba54a33383d791b9ed214ff025ec0f552c577dc315d2218c5a549833
name: perl-Switch
arch: noarch
version: 2.17
epoch: 0
release: 1
summary: A switch statement for Perl
url: http://search.cpan.org/dist/Switch/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Switch-2.17-1.src.rpm
location_href: noarch/perl-Switch-2.17-1.noarch.rpm
checksum_type: sha256
description:
  The Switch.pm module implements a generalized case mechanism that covers
  most (but not all) of the numerous possible combinations of switch and case
  values described above.

  The module augments the standard Perl syntax with two new control
  statements: 'switch' and 'case'. The 'switch' statement takes a single
  scalar argument of any type, specified in parentheses. 'switch' stores this
  value as the current switch value in a (localized) control variable. The
  value is followed by a block which may contain one or more Perl statements
  (including the 'case' statement described below). The block is
  unconditionally executed once the switch value has been cached.


pkgId: 6c160857f67a2f598d2ca86708760e6410a26f96824c590e6ba45bc9ba49b92f
name: perl-Term-Table
arch: armv7l
version: 0.023
epoch: 0
release: 0
summary: Format a header and rows into a table
url: https://metacpan.org/release/Term-Table
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Term-Table-0.023-0.src.rpm
location_href: armv7l/perl-Term-Table-0.023-0.armv7l.rpm
checksum_type: sha256
description:
  This is used by some failing tests to provide diagnostics about what has
  gone wrong. This module is able to format rows of data into tables.


pkgId: 14f0f1f55b1556a4ea7ceb84bd69be4b9de804f047dae6fd6f137687fd4bdb6b
name: perl-Test2-Suite
arch: armv7l
version: 1.302216
epoch: 0
release: 0
summary: Distribution with a rich set of tools built upon the Test2 framework
url: https://metacpan.org/release/Test2-Suite
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Test2-Suite-1.302216-0.src.rpm
location_href: armv7l/perl-Test2-Suite-1.302216-0.armv7l.rpm
checksum_type: sha256
description:
  Rich set of tools, plugins, bundles, etc built upon the Test2 testing
  library. If you are interested in writing tests, this is the distribution
  for you.


pkgId: 8319e3de2ec5041291742a2ad49c73008ae7846b2fb978eea6eefefc2112e545
name: perl-Try-Tiny
arch: armv7l
version: 0.32
epoch: 0
release: 1
summary: Minimal try/catch with proper preservation of $@
url: https://metacpan.org/pod/Try::Tiny
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Try-Tiny-0.32-1.src.rpm
location_href: armv7l/perl-Try-Tiny-0.32-1.armv7l.rpm
checksum_type: sha256
description:
  This module provides bare bones try/catch/finally statements that are
  designed to minimize common mistakes with eval blocks, and NOTHING else.

  This is unlike TryCatch which provides a nice syntax and avoids adding
  another call stack layer, and supports calling return from the try block
  to return from the parent subroutine. These extra features come
  at a cost of a few dependencies, namely Devel::Declare and Scope::Upper
  which are occasionally problematic, and the additional catch filtering
  uses Moose type constraints which may not be desirable either.

  The main focus of this module is to provide simple and reliable error
  handling for those having a hard time installing TryCatch, but who still
  want to write correct eval blocks without 5 lines of boilerplate each time.

  It's designed to work as correctly as possible in light of the various
  pathological edge cases (see "BACKGROUND") and to be compatible with
  any style of error values (simple strings, references, objects, overloaded
  objects, etc).

  If the try block dies, it returns the value of the last statement executed
  in the catch block, if there is one. Otherwise, it returns undef in scalar
  context or the empty list in list context. The following examples
  all assign "bar" to $x:

  my $x = try { die "foo" } catch { "bar" };
  my $x = try { die "foo" } || "bar";
  my $x = (try { die "foo" }) // "bar";

   my $x = eval { die "foo" } || "bar";
   You can add finally blocks, yielding the following:

   my $x;
   try { die 'foo' } finally { $x = 'bar' };
   try { die 'foo' } catch { warn "Got a die: $_" } finally { $x = 'bar' };

   finally blocks are always executed making them suitable for cleanup code
   which cannot be handled using local. You can add as many finally blocks
   to a given try block as you like.

   Note that adding a finally block without a preceding catch block suppresses
   any errors. This behaviour is consistent with using a standalone eval,
   but it is not consistent with try/finally patterns found in other programming
   languages, such as Java, Python, Javascript or C#. If you learned
   the try/finally pattern from one of these languages, watch out for this.


pkgId: fb2da44f5fbfa2028e9711573bfbcced131518d851d4c222225a7d94bd18bb3e
name: perl-Variable-Magic
arch: armv7l
version: 0.64
epoch: 0
release: 1
summary: Associate user-defined magic to variables from Perl.
url: https://metacpan.org/pod/Variable::Magic
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Variable-Magic-0.64-1.src.rpm
location_href: armv7l/perl-Variable-Magic-0.64-1.armv7l.rpm
checksum_type: sha256
description:
  Magic is Perl's way of enhancing variables. This mechanism
  lets the user add extra data to any variable and hook
  syntactical operations (such as access, assignment or destruction)
  that can be applied to it. With this module, you can add
  your own magic to any variable without having to write a single line of XS.

  You'll realize that these magic variables look a lot like tied variables.
  It is not surprising, as tied variables are implemented as a special
  kind of magic, just like any 'irregular' Perl variable : scalars like $!,
  $( or $^W, the %ENV and %SIG hashes, the @ISA array, vec() and substr()
  lvalues, threads::shared variables... They all share the same underlying
  C API, and this module gives you direct access to it.


pkgId: b697bc68e08161d05c83b2496bf2ceac9e32c22c2f314181352454c36280b39a
name: perl-XML-LibXML
arch: armv7l
version: 2.0210
epoch: 0
release: 0
summary: Perl Binding for libxml2
url: http://search.cpan.org/dist/XML-LibXML/
rpm_license: Artistic License ..
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-LibXML-2.0210-0.src.rpm
location_href: armv7l/perl-XML-LibXML-2.0210-0.armv7l.rpm
checksum_type: sha256
description:
  This module implements a Perl interface to the Gnome libxml2 library which
  provides interfaces for parsing and manipulating XML files. This module allows
  Perl programmers to make use of the highly capable validating XML parser and
  the high performance DOM implementation.

  Authors:
  	Matt Sergeant, Christian Glahn, Petr Pajas


pkgId: 1da9dffb89f079b51c6dd12aa2af9fafd6cd2169e3252dc1a5d2151d27f2c05d
name: perl-XML-NamespaceSupport
arch: armv7l
version: 1.12
epoch: 0
release: 0
summary: Simple Generic Namespace Processor
url: http://search.cpan.org/dist/XML-NamespaceSupport/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-NamespaceSupport-1.12-0.src.rpm
location_href: armv7l/perl-XML-NamespaceSupport-1.12-0.armv7l.rpm
checksum_type: sha256
description:
  This module offers a simple to process namespaced XML names (unames) from
  within any application that may need them. It also helps maintain a prefix
  to namespace URI map, and provides a number of basic checks.

  The model for this module is SAX2's NamespaceSupport class, readable at
  http://www.saxproject.org/namespaces.html It adds a few perlisations where
  we thought it appropriate.


pkgId: 30275d5dd0ddb437f0cf9e0921dc8603f116af5705988a32410583f5c97bbf5e
name: perl-XML-SAX
arch: armv7l
version: 1.02
epoch: 0
release: 6
summary: XML::SAX Perl Module
url: http://www.cpan.org/modules/by-module/XML/
rpm_license: Artistic License ..
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-SAX-1.02-6.src.rpm
location_href: armv7l/perl-XML-SAX-1.02-6.armv7l.rpm
checksum_type: sha256
description:
  XML::SAX consists of several framework classes for using and building
  Perl SAX2 XML parsers, filters, and drivers. It is designed around the
  need to be able to "plug in" different SAX parsers to an application
  without requiring programmer intervention. Those of you familiar with
  the DBI will be right at home. Some of the designs come from the Java
  JAXP specification (SAX part), only without the javaness.


pkgId: 737991a0ed20d4c010297f52316793cb4336e77ad1614624fec64a602afd96a9
name: perl-XML-SAX-Base
arch: armv7l
version: 1.09
epoch: 0
release: 0
summary: Base class SAX Drivers and Filters
url: http://search.cpan.org/dist/XML-SAX-Base/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-SAX-Base-1.09-0.src.rpm
location_href: armv7l/perl-XML-SAX-Base-1.09-0.armv7l.rpm
checksum_type: sha256
description:
  This module has a very simple task - to be a base class for PerlSAX drivers
  and filters. It's default behaviour is to pass the input directly to the
  output unchanged. It can be useful to use this module as a base class so
  you don't have to, for example, implement the characters() callback.

  The main advantages that it provides are easy dispatching of events the
  right way (ie it takes care for you of checking that the handler has
  implemented that method, or has defined an AUTOLOAD), and the guarantee
  that filters will pass along events that they aren't implementing to
  handlers downstream that might nevertheless be interested in them.


pkgId: 91d692c4dcf489cad18379f2666a344fef9cc2adaa6f981c7bf2139be3baa069
name: perl-XML-Twig
arch: armv7l
version: 3.52
epoch: 0
release: 1
summary: Tree interface to XML documents
url: http://search.cpan.org/dist/XML::Twig
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-Twig-3.52-1.src.rpm
location_href: armv7l/perl-XML-Twig-3.52-1.armv7l.rpm
checksum_type: sha256
description:
  XML::Twig is (yet another!) XML transformation module.

  Its strong points: can be used to process huge documents while still
  being in tree mode; not bound by DOM or SAX, so it is very perlish and
  offers a very comprehensive set of methods; simple to use; DWIMs as
  much as possible

  What it doesn't offer: full SAX support (it can export SAX, but only
  reads XML), full XPath support (unless you use XML::Twig::XPath), nor
  DOM support.

  Other drawbacks: it is a big module, and with over 500 methods
  available it can be a bit overwhelming. A good starting point is the
  tutorial at http://xmltwig.com/xmltwig/tutorial/index.html. In fact the
  whole XML::Twig page at http://xmltwig.com/xmltwig/ has plenty of
  information to get you started with XML::Twig


pkgId: 624e7a77d9901e2e9b3bbbf0cf36db49283b7e2e0890d126dbb1647a3b13863b
name: perl-YAML
arch: armv7l
version: 1.31
epoch: 0
release: 0
summary: YAML Ain't Markup Language (tm)
url: http://search.cpan.org/dist/YAML/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-YAML-1.31-0.src.rpm
location_href: armv7l/perl-YAML-1.31-0.armv7l.rpm
checksum_type: sha256
description:
  The YAML.pm module implements a YAML Loader and Dumper based on the YAML
  1.0 specification. the http://www.yaml.org/spec/ manpage

  YAML is a generic data serialization language that is optimized for human
  readability. It can be used to express the data structures of most modern
  programming languages. (Including Perl!!!)

  For information on the YAML syntax, please refer to the YAML specification.


pkgId: d55e95cf5cd45a6cb2bac32b19ff7f8c97b92ba71505c47965376891e614ad63
name: perl-namespace-autoclean
arch: armv7l
version: 0.31
epoch: 0
release: 1
summary: Keep imports out of your namespace
url: https://metacpan.org/pod/namespace::autoclean
rpm_license: perl_5
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-namespace-autoclean-0.31-1.src.rpm
location_href: armv7l/perl-namespace-autoclean-0.31-1.armv7l.rpm
checksum_type: sha256
description:
  When you import a function into a Perl package, it will naturally also be available as a method.
  The namespace::autoclean pragma will remove all imported symbols at the end of the current package's
  compile cycle. Functions called in the package itself will still be bound by their name,
  but they won't show up as methods on your class or instances.
  This module is very similar to namespace::clean, except it will clean all imported functions,
  no matter if you imported them before or after you used the pragma.
  It will also not touch anything that looks like a method.
  If you're writing an exporter and you want to clean up after yourself (and your peers),
  you can use the -cleanee switch to specify what package to clean:

  package My::MooseX::namespace::autoclean;
  use strict;

  use namespace::autoclean (); # no cleanup, just load

  sub import {
      namespace::autoclean->import(
        -cleanee => scalar(caller),
      );
  }


pkgId: b4ba3033d43b7e47619228346109094b80533ec085f5dcf90d1e283418b0e1a1
name: perl-namespace-clean
arch: armv7l
version: 0.27
epoch: 0
release: 1
summary: Keep imports and functions out of your namespace
url: https://metacpan.org/pod/namespace::clean
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-namespace-clean-0.27-1.src.rpm
location_href: armv7l/perl-namespace-clean-0.27-1.armv7l.rpm
checksum_type: sha256
description:
  Keeping packages clean
  When you define a function, or import one, into a Perl package,
  it will naturally also be available as a method. This does not
  per se cause problems, but it can complicate subclassing and,
  for example, plugin classes that are included via multiple
  inheritance by loading them as base classes.

  The namespace::clean pragma will remove all previously declared
  or imported symbols at the end of the current package's compile cycle.
  Functions called in the package itself will still be bound by their name,
  but they won't show up as methods on your class or instances.

  By unimporting via no you can tell namespace::clean to start
  collecting functions for the next use namespace::clean; specification.

  You can use the -except flag to tell namespace::clean that you don't
  want it to remove a certain function or method. A common use would be
  a module exporting an import method along with some functions:


pkgId: e7000d90b4680f22b3948a0bb49cbea8603c39363ac2fc2a35c7d91fe73ea89b
name: prelink
arch: armv7l
version: 20130503
epoch: 0
release: 0
summary: An ELF Prelinking Utility
url: http://people.redhat.com/jakub/prelink/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: prelink-20130503-0.src.rpm
location_href: armv7l/prelink-20130503-0.armv7l.rpm
checksum_type: sha256
description:
  The prelink program is a utility that modifies shared libraries and
  executables in the ELF format so that far less relocations need to be
  resolved at run time.  This decreases program start-up time.

  Be aware that prelink can modify all libraries and executables on your
  system. Applications which monitor changes in files or RPM itself
  will no longer work.


pkgId: 12fec42010983b257452604f048840898bb5e7c12ee5a5fba5bbeea198bbacc3
name: privilege-verifier
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: Privilege Verification Utility
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.3.1-0.src.rpm
location_href: armv7l/privilege-verifier-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Verifier Utility provides functions to verify privilege information of packages to be installed.


pkgId: 2c4f7b1bdcc7ada3b4943ab1e3174366705c4b475696c817a1fb8949fb2e8fed
name: protobuf
arch: armv7l
version: 33.1
epoch: 0
release: 1
summary: Protocol Buffers - Google's data interchange format
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: armv7l/protobuf-33.1-1.armv7l.rpm
checksum_type: sha256
description:
  Protocol Buffers are a way of encoding structured data in an efficient
  yet extensible format. Google uses Protocol Buffers for almost all of
  its internal RPC protocols and file formats.

  Protocol buffers are a flexible, efficient, automated mechanism for
  serializing structured data – think XML, but smaller, faster, and
  simpler. You define how you want your data to be structured once, then
  you can use special generated source code to easily write and read
  your structured data to and from a variety of data streams and using a
  variety of languages. You can even update your data structure without
  breaking deployed programs that are compiled against the "old" format.


pkgId: 129482f935a26b684c8e6695dc6d7f1fca47489929b670a3786296ab42803c9e
name: protobuf-lite
arch: armv7l
version: 33.1
epoch: 0
release: 1
summary: Protocol Buffers LITE_RUNTIME libraries
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: armv7l/protobuf-lite-33.1-1.armv7l.rpm
checksum_type: sha256
description:
  Protocol Buffers built with optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 3ae8a18caee86763277e9a991b8187e918745d52987993b7a2cc896d116ef565
name: protobuf-lite-devel
arch: armv7l
version: 33.1
epoch: 0
release: 1
summary: Protocol Buffers LITE_RUNTIME development libraries
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: armv7l/protobuf-lite-devel-33.1-1.armv7l.rpm
checksum_type: sha256
description:
  This package contains development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: f9b88d2e18d8e752316800041c00c020fab9f234b6719c0da286ec7f9ab9012d
name: protobuf-lite-static
arch: armv7l
version: 33.1
epoch: 0
release: 1
summary: Static development files for protobuf-lite
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: armv7l/protobuf-lite-static-33.1-1.armv7l.rpm
checksum_type: sha256
description:
  This package contains static development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: a186203d28d6f3bee37c8650f2e313a72ea6f1afe7f673e433aa3e10d243d1fa
name: psmisc
arch: armv7l
version: 23.7
epoch: 0
release: 1
summary: Utilities for managing processes on your system
url: http://sourceforge.net/projects/psmisc/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: psmisc-23.7-1.src.rpm
location_href: armv7l/psmisc-23.7-1.armv7l.rpm
checksum_type: sha256
description:
  The psmisc package contains utilities for managing processes on your
  system: pstree, killall and fuser.  The pstree command displays a tree
  structure of all of the running processes on your system.  The killall
  command sends a specified signal (SIGTERM if nothing is specified) to
  processes identified by name.  The fuser command identifies the PIDs of
  processes that are using specified files or filesystems.


pkgId: 41b197544b5631cbeef8484c1365ade42be086318c0579966ab06bcec9e0aaf8
name: pulseaudio
arch: armv7l
version: 15.0
epoch: 0
release: 41
summary: Improved Linux sound server
url: http://pulseaudio.org
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Audio
rpm_sourcerpm: pulseaudio-15.0-41.src.rpm
location_href: armv7l/pulseaudio-15.0-41.armv7l.rpm
checksum_type: sha256
description:
  PulseAudio is a sound server for Linux and other Unix like operating
  systems. It is intended to be an improved drop-in replacement for the
  Enlightened Sound Daemon (ESOUND).


pkgId: 8144f2f9c91d7aad225e3f8a2aa304085c8f843a8249f8b31d5778825a94af0b
name: pulseaudio-utils
arch: armv7l
version: 15.0
epoch: 0
release: 41
summary: Command line tools for the PulseAudio sound server
url: http://pulseaudio.org
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Audio
rpm_sourcerpm: pulseaudio-15.0-41.src.rpm
location_href: armv7l/pulseaudio-utils-15.0-41.armv7l.rpm
checksum_type: sha256
description:
  These tools provide command line access to various features of the
  PulseAudio sound server. Included tools are:
  pabrowse - Browse available PulseAudio servers on the local network.
  paplay - Playback a WAV file via a PulseAudio sink.
  pacat - Cat raw audio data to a PulseAudio sink.
  parec - Cat raw audio data from a PulseAudio source.
  pacmd - Connect to PulseAudio's built-in command line control interface.
  pactl - Send a control command to a PulseAudio server.
  padsp - /dev/dsp wrapper to transparently support OSS applications.
  pax11publish - Store/retrieve PulseAudio default server/sink/source
  settings in the X11 root window.


pkgId: 8296e35a9cefedbd1bae5ddda1270fc5e049a43cc4dc873f12a25dda8b130aaa
name: pygobject2
arch: armv7l
version: 3.55.0
epoch: 0
release: 1
summary: Python bindings for GObject
url: http://www.pygtk.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: pygobject2-3.55.0-1.src.rpm
location_href: armv7l/pygobject2-3.55.0-1.armv7l.rpm
checksum_type: sha256
description:
  The pygobject2 package provides a convenient wrapper for the GObject library
  for use in Python programs. This is version 3.55.0, an upgrade from the
  Tizen base version 3.46.0.


pkgId: a31e1829b746275c1147d76fed4d7a2f1f019ab22cc908d6b0b1936911fef4d6
name: pygobject2-devel
arch: armv7l
version: 3.55.0
epoch: 0
release: 1
summary: Development files for building add-on libraries
url: http://www.pygtk.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: pygobject2-3.55.0-1.src.rpm
location_href: armv7l/pygobject2-devel-3.55.0-1.armv7l.rpm
checksum_type: sha256
description:
  This package contains files required to build wrappers for pygobject2-based
  libraries such as pygtk2.


pkgId: 6de62b8424301e52bfa5773edbc587aac843df593dd6e4f52bb39e29bb4b05a9
name: python-Cheetah
arch: armv7l
version: 2.4.4
epoch: 0
release: 0
summary: Cheetah is a template engine and code generation tool
url: http://www.cheetahtemplate.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-Cheetah-2.4.4-0.src.rpm
location_href: armv7l/python-Cheetah-2.4.4-0.armv7l.rpm
checksum_type: sha256
description:
  Cheetah is an open source template engine and code generation tool.

  It can be used standalone or combined with other tools and frameworks. Web
  development is its principle use, but Cheetah is very flexible and is also being
  used to generate C++ game code, Java, sql, form emails and even Python code.


pkgId: 222a242955c1c73cc8ee6287661cc748a4b846a6db4dffd94e0e6546aa05d112
name: python-M2Crypto
arch: armv7l
version: 0.35.1.1
epoch: 0
release: 0
summary: Crypto and SSL toolkit for Python
url: http://chandlerproject.org/bin/view/Projects/MeTooCrypto
rpm_license: MIT and ZPL-2.0 and BSD-3-Clause
rpm_vendor: tizen
rpm_group: Platfrom Development/Python
rpm_sourcerpm: python-M2Crypto-0.35.1.1-0.src.rpm
location_href: armv7l/python-M2Crypto-0.35.1.1-0.armv7l.rpm
checksum_type: sha256
description:
  M2Crypto is a crypto and SSL toolkit for Python featuring the
  following:

  RSA, DSA, DH, HMACs, message digests, symmetric ciphers (including
  AES). SSL functionality to implement clients and servers. HTTPS
  extensions to Python's httplib, urllib, and xmlrpclib. Unforgeable
  HMAC'ing AuthCookies for web session management. FTP/TLS client and
  server. S/MIME. ZServerSSL: A HTTPS server for Zope. ZSmime: An S/MIME
  messenger for Zope.

  It currently lives at
  http://wiki.osafoundation.org/bin/view/Projects/MeTooCrypto. The
  original M2Crypto homepage is at http://sandbox.rulemaker.net/ngps/m2/.


pkgId: dc074a6ba33ad9abf02ce3031c9b2a3da4bf0412650878acdb03651aceeb3a27
name: python-PyYAML
arch: armv7l
version: 3.10
epoch: 0
release: 0
summary: YAML parser and emitter for Python
url: http://pyyaml.org/wiki/PyYAML
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-PyYAML-3.10-0.src.rpm
location_href: armv7l/python-PyYAML-3.10-0.armv7l.rpm
checksum_type: sha256
description:
  YAML is a data serialization format designed for human readability
  and interaction with scripting languages.  PyYAML is a YAML parser
  and emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: af107b9c36913baf1733ea867770ab3c6274506f89da433b15bc76af980fe1b5
name: python-ZSI
arch: noarch
version: 2.1.a1
epoch: 0
release: 0
summary: Zolera SOAP Infrastructure
url: http://pywebsvcs.sf.net
rpm_license: Python
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-ZSI-2.1.a1-0.src.rpm
location_href: noarch/python-ZSI-2.1.a1-0.noarch.rpm
checksum_type: sha256
description:
  ZSI, the Zolera SOAP Infrastructure, is a pure-Python module that
  provides an implementation of SOAP messaging, as described in SOAP 1.1
  Specification (see http://www.w3.org/TR/soap).  It can also be used to
  build applications using SOAP Messages with Attachments (see
  http://www.w3.org/TR/SOAP-attachments).  ZSI is intended to make it
  easier to write web services in Python.

  In particular, ZSI parses and generates SOAP messages, and converts
  between native Python datatypes and SOAP syntax. Simple dispatch and
  invocation methods are supported.  There are no known bugs.  Its only
  known limitation is that it cannot handle multi-dimensional arrays.


pkgId: cdb6b371109f955c79221f9941a496a11d0da23862d4f9baeab55be501a3bf69
name: python-coverage
arch: armv7l
version: 3.6
epoch: 0
release: 0
summary: Code coverage measurement for Python
url: http://nedbatchelder.com/code/coverage
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-coverage-3.6-0.src.rpm
location_href: armv7l/python-coverage-3.6-0.armv7l.rpm
checksum_type: sha256
description:
  Coverage.py measures code coverage, typically during test execution. It uses
  the code analysis tools and tracing hooks provided in the Python standard
  library to determine which lines are executable, and which have been executed.


pkgId: 19365dbef7ae56d69482494cea6cfe81ac432666ecf3532d87cff27231edb1be
name: python-cython
arch: armv7l
version: 0.29.21
epoch: 0
release: 0
summary: The Cython compiler for writing C extensions for the Python language
url: http://www.cython.org
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-cython-0.29.21-0.src.rpm
location_href: armv7l/python-cython-0.29.21-0.armv7l.rpm
checksum_type: sha256
description:
  The Cython language makes writing C extensions for the Python language as
  easy as Python itself.  Cython is a source code translator based on the
  well-known Pyrex, but supports more cutting edge functionality and
  optimizations.

  The Cython language is very close to the Python language (and most Python
  code is also valid Cython code), but Cython additionally supports calling C
  functions and declaring C types on variables and class attributes. This
  allows the compiler to generate very efficient C code from Cython code.

  This makes Cython the ideal language for writing glue code for external C
  libraries, and for fast C modules that speed up the execution of Python
  code.


pkgId: 973dae292a7bef263bc4b52416042e89a657b2c63290e6413e579eb6477ae696
name: python-distribute
arch: noarch
version: 0.6.32
epoch: 0
release: 0
summary: Easily download, build, install, upgrade, and uninstall Python packages
url: http://packages.python.org/distribute
rpm_license: Python-2.0 or ZPL-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-distribute-0.6.32-0.src.rpm
location_href: noarch/python-distribute-0.6.32-0.noarch.rpm
checksum_type: sha256
description:
  Distribute is a fork of the Setuptools project.

  Distribute is intended to replace Setuptools as the standard method for working
  with Python module distributions.


pkgId: 433c4d914afb46d5a108d73ac578ba4dfaf716d605ab28d877d568ba00527153
name: python-gobject-cairo
arch: armv7l
version: 3.36.1
epoch: 0
release: 0
summary: Python bindings for GObject -- Cairo bindings
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-gobject-3.36.1-0.src.rpm
location_href: armv7l/python-gobject-cairo-3.36.1-0.armv7l.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python that gives you access to
  GLib's GObjects.

  This package contains the Python Cairo bindings for GObject.


pkgId: 8312fe899c9b4556aa35cce6dde9c37cab75871457f928a88bbf17c3c846d815
name: python-gobject-pygtkcompat
arch: armv7l
version: 3.36.1
epoch: 0
release: 0
summary: Python bindings for GObject -- PyGTK Backwards Compatibility
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-gobject-3.36.1-0.src.rpm
location_href: armv7l/python-gobject-pygtkcompat-3.36.1-0.armv7l.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python that gives you access to
  GLib's GObjects.

  This package contains a module providing backwards compatibility to
  pygtk.


pkgId: 3e706677de57c25c9c9c49e8aa882f09f960379c6e251809a20024ec72c13da5
name: python-gpgme
arch: armv7l
version: 0.1
epoch: 0
release: 0
summary: A Python module for working with OpenPGP messages
url: http://pypi.python.org/pypi/pygpgme
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-gpgme-0.1-0.src.rpm
location_href: armv7l/python-gpgme-0.1-0.armv7l.rpm
checksum_type: sha256
description:
  PyGPGME is a Python module that lets you sign, verify, encrypt and
  decrypt messages using the OpenPGP format.

  It is built on top of the GNU Privacy Guard and the GPGME library.


pkgId: 9ae3559c7579ac35084e2a49a7f821b9e37a890cb22e198de9fd057d0294b462
name: python-iniparse
arch: noarch
version: 0.4
epoch: 0
release: 0
summary: Python Module for Accessing and Modifying Configuration Data in INI files
url: http://code.google.com/p/iniparse/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-iniparse-0.4-0.src.rpm
location_href: noarch/python-iniparse-0.4-0.noarch.rpm
checksum_type: sha256
description:
  iniparse is an INI parser for Python which is API compatible with the
  standard library's ConfigParser, preserves structure of INI files
  (order of sections & options, indentation, comments, and blank lines
  are preserved when data is updated), and is more convenient to use.


pkgId: 54fd4411510b24d1248f397d4ab029b5ec9688cafc22bcf9376128b48e2bdd17
name: python-numpy
arch: armv7l
version: 1.16.6
epoch: 0
release: 0
summary: NumPy array processing for numbers, strings, records and objects
url: http://www.numpy.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/Python
rpm_sourcerpm: python-numpy-1.16.6-0.src.rpm
location_href: armv7l/python-numpy-1.16.6-0.armv7l.rpm
checksum_type: sha256
description:
  NumPy is a general-purpose array-processing package designed to
  efficiently manipulate large multi-dimensional arrays of arbitrary
  records without sacrificing too much speed for small multi-dimensional
  arrays.  NumPy is built on the Numeric code base and adds features
  introduced by numarray as well as an extended C-API and the ability to
  create arrays of arbitrary type which also makes NumPy suitable for
  interfacing with general-purpose data-base applications.

  There are also basic facilities for discrete fourier transform,
  basic linear algebra and random number generation.


pkgId: 36609d7420149bab682b97948484408451588f35f62ea35bdb3368527cbf1d79
name: python-pyOpenSSL
arch: noarch
version: 19.0.0.0
epoch: 0
release: 0
summary: Python wrapper module around the OpenSSL library
url: https://github.com/pyca/pyopenssl
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-pyOpenSSL-19.0.0.0-0.src.rpm
location_href: noarch/python-pyOpenSSL-19.0.0.0-0.noarch.rpm
checksum_type: sha256
description:
  High-level wrapper around a subset of the OpenSSL library, includes
   * SSL.Connection objects, wrapping the methods of Python's portable
     sockets
   * Callbacks written in Python
   * Extensive error-handling mechanism, mirroring OpenSSL's error codes
  ...  and much more ;)


pkgId: 8a7be4b5ba20220e533adf46f8bb1715339066741808589d2b2c497902afd9b1
name: python-pycrypto
arch: armv7l
version: 2.6.1
epoch: 0
release: 0
summary: Cryptographic modules for Python
url: http://www.pycrypto.org/
rpm_license: Public Domain
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-pycrypto-2.6.1-0.src.rpm
location_href: armv7l/python-pycrypto-2.6.1-0.armv7l.rpm
checksum_type: sha256
description:
  The package contains:

    * Hash functions: MD2, MD4, RIPEMD, SHA256.
    * Block encryption algorithms: AES, ARC2, Blowfish, CAST, DES,
      Triple-DES, IDEA, RC5.
    * Stream encryption algorithms: ARC4, simple XOR.
    * Public-key algorithms: RSA, DSA, ElGamal, qNEW.
    * Protocols: All-or-nothing transforms, chaffing/winnowing.
    * Miscellaneous: RFC1751 module for converting 128-key keys into a
      set of English words, primality testing.
    * Some demo programs (currently all quite old and outdated).


pkgId: 121fec01cfc3c36218fa87a27d52f2683c9be88b27b6623807a2e97aad383113
name: python-pycurl
arch: armv7l
version: 7.19.0
epoch: 0
release: 0
summary: A Python interface to libcurl
url: http://pycurl.sourceforge.net/
rpm_license: LGPL-2.1+ or MIT/X11
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-pycurl-7.19.0-0.src.rpm
location_href: armv7l/python-pycurl-7.19.0-0.armv7l.rpm
checksum_type: sha256
description:
  PycURL is a Python interface to libcurl. PycURL can be used to fetch
  objects identified by a URL from a Python program, similar to the
  urllib Python module. PycURL is mature, very fast, and supports a lot
  of features.


pkgId: 03fe9a115a8a9cfec30554b70de9968736575445383442a27501d54769093ea4
name: python-sqlite
arch: armv7l
version: 2.6.3
epoch: 0
release: 0
summary: DB-API 2.0 interface for SQLite 3.x
url: http://pysqlite.googlecode.com/
rpm_license: Zlib
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-sqlite-2.6.3-0.src.rpm
location_href: armv7l/python-sqlite-2.6.3-0.armv7l.rpm
checksum_type: sha256
description:
  Python interface to SQLite 3

  pysqlite is an interface to the SQLite 3.x embedded relational database engine.
  It is almost fully compliant with the Python database API version 2.0 also
  exposes the unique features of SQLite.


pkgId: 1747e886be0a078c413e6c7c6055bcc45c3ad959dbc9249a8e5374c0911e604a
name: python-urlgrabber
arch: noarch
version: 3.9.1
epoch: 0
release: 0
summary: A high-level cross-protocol url-grabber
url: http://urlgrabber.baseurl.org/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-urlgrabber-3.9.1-0.src.rpm
location_href: noarch/python-urlgrabber-3.9.1-0.noarch.rpm
checksum_type: sha256
description:
  A high-level cross-protocol url-grabber for python supporting HTTP, FTP
  and file locations.  Features include keepalive, byte ranges, throttling,
  authentication, proxies and more.


pkgId: 1b83af7a218aef3f8fa876c25f271a074e252ab3c5b9c39de6acfe21e07b5a02
name: python3-Cheetah
arch: armv7l
version: 3.4.0.post5
epoch: 0
release: 0
summary: Cheetah is a template engine and code generation tool
url: http://www.cheetahtemplate.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python3
rpm_sourcerpm: python3-Cheetah-3.4.0.post5-0.src.rpm
location_href: armv7l/python3-Cheetah-3.4.0.post5-0.armv7l.rpm
checksum_type: sha256
description:
  Cheetah is an open source template engine and code generation tool.

  It can be used standalone or combined with other tools and frameworks. Web
  development is its principle use, but Cheetah is very flexible and is also being
  used to generate C++ game code, Java, sql, form emails and even Python3 code.


pkgId: 84ce91052a50e3fb2191c8ae743057e246696b878519ac407e70cd6e854894fb
name: python3-PyYAML
arch: armv7l
version: 3.10
epoch: 0
release: 0
summary: YAML parser and emitter for Python3
url: http://pyyaml.org/wiki/PyYAML
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-PyYAML-3.10-0.src.rpm
location_href: armv7l/python3-PyYAML-3.10-0.armv7l.rpm
checksum_type: sha256
description:
  PyYAML for Python3

  YAML is a data serialization format designed for human readability
  and interaction with scripting languages.  PyYAML is a YAML parser
  and emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: d10c61626f68e8727690deaac8d271a0bb72ec900949043693e11df0beb5d473
name: python3-asn1crypto
arch: armv7l
version: 1.5.1
epoch: 0
release: 0
summary: python3-asn1crypto
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Testing
rpm_sourcerpm: python3-asn1crypto-1.5.1-0.src.rpm
location_href: armv7l/python3-asn1crypto-1.5.1-0.armv7l.rpm
checksum_type: sha256
description:
  ASN.1 parser and serializer with definitions for private keys, public keys,
  certificates, CRL, OCSP, CMS, PKCS#3, PKCS#7, PKCS#8, PKCS#12, PKCS#5, X509 and TSP


pkgId: ea90a0ed737fee03d9e8ef0714b64df51d8130911ec70488b02b92b006f6a94a
name: python3-atomicwrites
arch: armv7l
version: 1.4.1
epoch: 0
release: 0
summary: Atomic file writes for Python
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-atomicwrites-1.4.1-0.src.rpm
location_href: armv7l/python3-atomicwrites-1.4.1-0.armv7l.rpm
checksum_type: sha256
description:
  Atomic file writes for python3.
  Features that distinguish it from other similar libraries:

  - Race-free assertion that the target file doesn't yet exist. This can be
    controlled with the 'overwrite' parameter.

  - High-level API that wraps a very flexible class-based API


pkgId: e627a0ee9f9c505ad63b93d7a955c2cd6eeeef528143b5f149f2a372baf81412
name: python3-catkin-pkg
arch: noarch
version: 1.1.0
epoch: 0
release: 1
summary: catkin package library
rpm_license: BSD
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-catkin-pkg-1.1.0-1.src.rpm
location_href: noarch/python3-catkin-pkg-1.1.0-1.noarch.rpm
checksum_type: sha256
description:
  The pytest framework makes it easy to write small tests, yet scales to support complex functional testing for applications and libraries.


pkgId: 4f8de72e095e9bcd74986596ca25a81a0d0364e31826daea247ecc1fa3d94035
name: python3-cffi
arch: armv7l
version: 2.0.0
epoch: 0
release: 0
summary: Foreign Function Interface for Python calling C code
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-cffi-2.0.0-0.src.rpm
location_href: armv7l/python3-cffi-2.0.0-0.armv7l.rpm
checksum_type: sha256
description:
  Foreign Function Interface for Python calling C code. The aim of this project
  is to provide a convenient and reliable way of calling C code from Python.


pkgId: 4abe78dd162d1db34b4c576dc0e2140d43bbd1410005288c189738ba3ef01ba2
name: python3-cryptography
arch: armv7l
version: 2.3
epoch: 0
release: 0
summary: PyCA's cryptography library
rpm_license: Apache-2.0 or BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-cryptography-2.3-0.src.rpm
location_href: armv7l/python3-cryptography-2.3-0.armv7l.rpm
checksum_type: sha256
description:
  cryptography is a package designed to expose cryptographic primitives and
  recipes to Python developers.


pkgId: afe889e94899ee85eba20e7115f7d2c63804e20890ae7686fdf509db37fed478
name: python3-distlib
arch: noarch
version: 0.4.0
epoch: 0
release: 1
summary: packaging and distribution of Python software
rpm_license: Python-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-distlib-0.4.0-1.src.rpm
location_href: noarch/python3-distlib-0.4.0-1.noarch.rpm
checksum_type: sha256
description:
  Distlib is a library which implements low-level functions that relate to packaging and distribution of Python software.


pkgId: 4279783eab9d7d52f7996157f0b8d78e36b6996b72b9864e689244e5199109c9
name: python3-empy
arch: noarch
version: 4.2
epoch: 0
release: 0
summary: A powerful and robust template system for Python
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages
rpm_sourcerpm: python3-empy-4.2-0.src.rpm
location_href: noarch/python3-empy-4.2-0.noarch.rpm
checksum_type: sha256
description:
  EmPy is a system for embedding Python expressions and statements in template
  text; it takes an EmPy source file, processes it, and produces output.


pkgId: 7a84df723d1f674dc5b2bd90da2f8ba26b33be72869ed1ad5388287d3c0b04a3
name: python3-gobject-cairo
arch: armv7l
version: 3.46.0
epoch: 0
release: 0
summary: Python3 bindings for GObject -- Cairo bindings
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-gobject-3.46.0-0.src.rpm
location_href: armv7l/python3-gobject-cairo-3.46.0-0.armv7l.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python3 that gives you access to
  GLib's GObjects.

  This package contains the Python3 Cairo bindings for GObject.


pkgId: 52b97bb2293a2cce9e8e238f8995af05abd0dc5bf6e22314fbafffa22ece331b
name: python3-gobject-pygtkcompat
arch: armv7l
version: 3.46.0
epoch: 0
release: 0
summary: Python3 bindings for GObject -- PyGTK Backwards Compatibility
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-gobject-3.46.0-0.src.rpm
location_href: armv7l/python3-gobject-pygtkcompat-3.46.0-0.armv7l.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python3 that gives you access to
  GLib's GObjects.

  This package contains a module providing backwards compatibility to
  pygtk.


pkgId: 32beb81b170c3790d2271ae5f07c41b499251cec957e0f9fa038233057e57968
name: python3-grpcio
arch: armv7l
version: 1.76.0
epoch: 0
release: 0
summary: HTTP/2-based Remote Procedure Call implementation
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-grpcio-1.76.0-0.src.rpm
location_href: armv7l/python3-grpcio-1.76.0-0.armv7l.rpm
checksum_type: sha256
description:
  gRPC is a remote procedure call (RPC) framework. gRPC enables client
  and server applications to communicate, and enables the building of
  connected systems.


pkgId: 5d8df23167866f08a59ee1ed8f20a7eb037b9d524bf47d1cc8107fcf30f5faa8
name: python3-hatch-fancy-pypi-readme
arch: armv7l
version: 25.1.0
epoch: 0
release: 1
summary: Hatch plugin for writing fancy PyPI readmes
url: https://github.com/hynek/hatch-fancy-pypi-readme
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-hatch-fancy-pypi-readme-25.1.0-1.src.rpm
location_href: armv7l/python3-hatch-fancy-pypi-readme-25.1.0-1.armv7l.rpm
checksum_type: sha256
description:
  This provides a Hatch metadata plugin for everyone who cares about the
  first impression of their projectâ€™s PyPI landing page. It allows you to
  define your PyPI project description in terms of concatenated fragments
  that are based on static strings, files, and most importantly: parts of
  files defined using cut-off points or regular expressions.


pkgId: a2aba60de62b1ac5a5f5394a8ff259f254e2d30d561a6742d8c12e8c6c09b502
name: python3-hatch-vcs
arch: armv7l
version: 0.5.0
epoch: 0
release: 1
summary: Hatch plugin for versioning with your preferred VCS
url: https://github.com/ofek/hatch-vcs
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-hatch-vcs-0.5.0-1.src.rpm
location_href: armv7l/python3-hatch-vcs-0.5.0-1.armv7l.rpm
checksum_type: sha256
description:
  This provides a plugin for Hatch that uses your preferred version control
  system (like Git) to determine project versions.


pkgId: 04c3be53c5c8b74f8115ec1bc3d3605fa4cc2723409775e3b6d2a05f5a4cdf56
name: python3-idna
arch: noarch
version: 3.11
epoch: 0
release: 0
summary: Internationalized Domain Names in Applications (IDNA)
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-idna-3.11-0.src.rpm
location_href: noarch/python3-idna-3.11-0.noarch.rpm
checksum_type: sha256
description:
  A library to support the Internationalised Domain Names in
  Applications (IDNA) protocol as specified in RFC 5891
  http://tools.ietf.org/html/rfc5891. This version of the protocol
  is often referred to as \A1\B0IDNA2008\A1\B1 and can produce different
  results from the earlier standard from 2003.

  The library is also intended to act as a suitable drop-in replacement
  for the \A1\B0encodings.idna\A1\B1 module that comes with the Python standard
  library but currently only supports the older 2003 specification.


pkgId: bf8ca8280c3a6d49e25448bed38e6ddda023168806e25d38752d9529971a2b9a
name: python3-iso8601
arch: noarch
version: 2.1.0
epoch: 0
release: 0
summary: Simple module to parse ISO 8601 dates
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-iso8601-2.1.0-0.src.rpm
location_href: noarch/python3-iso8601-2.1.0-0.noarch.rpm
checksum_type: sha256
description:
  Simple module to parse ISO 8601 dates

  This module parses the most common forms of ISO 8601 date strings (e.g.
  2007-01-14T20:34:22+00:00) into datetime objects.


pkgId: 0af741434af1d96186a6fba7008f8e8ad23f697ba1fc59c0bccac9d7d55e0aa8
name: python3-jinja2
arch: noarch
version: 3.1.3
epoch: 0
release: 1
summary: A syntax highlighting engine written in Python3
url: https://jinja.palletsprojects.com/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-jinja2-3.1.3-1.src.rpm
location_href: noarch/python3-jinja2-3.1.3-1.noarch.rpm
checksum_type: sha256
description:
  Jinja is a fast, expressive, extensible templating engine. Special
  placeholders in the template allow writing code similar to Python
  syntax. Then the template is passed data to render the final document.


pkgId: 1032b747abf866b7b41890e3c3f808af741fbe5c49d6d8e30c2aa09a4976aac4
name: python3-meson-python
arch: noarch
version: 0.18.0
epoch: 0
release: 0
summary: Meson Python build backend (PEP 517)
url: https://github.com/mesonbuild/meson-python
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-meson-python-0.18.0-0.src.rpm
location_href: noarch/python3-meson-python-0.18.0-0.noarch.rpm
checksum_type: sha256
description:
  meson-python is a Python build backend built on top of the Meson build system.
  It enables to use Meson for the configuration and build steps of Python
  packages. Meson is an open source build system meant to be both extremely fast,
  and, even more importantly, as user friendly as possible. meson-python is best
  suited for building Python packages containing extension modules implemented in
  languages such as C, C++, Cython, Fortran, Pythran, or Rust. Consult the
  documentation for more details.


pkgId: 69355c4b4b710f986680a82392cc59f3a8cb1864067fd65a429f4257536a763f
name: python3-more-itertools
arch: noarch
version: 10.8.0
epoch: 0
release: 0
summary: More routines for operating on iterables, beyond itertools
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-more-itertools-10.8.0-0.src.rpm
location_href: noarch/python3-more-itertools-10.8.0-0.noarch.rpm
checksum_type: sha256
description:
  I love itertools; it's one of the most beautiful, composable standard libs.
  Whenever I have an iteration problem, there's almost always an itertools
  routine that fits it perfectly. Sometimes, however, neither itertools nor the
  recipes included in its docs do quite what I need.

  Here I've collected several routines I've reached for but not found. Since
  they are deceptively tricky to get right, I've wrapped them up into a library.
  We've also included implementations of the recipes from the itertools
  documentation. Enjoy! Any additions are welcome; just file a pull request.


pkgId: e4f81ef21ccc4532681d67c663086ae829e51bd2ed713a2c93d32a02e7252f88
name: python3-netifaces
arch: armv7l
version: 0.11.0
epoch: 0
release: 0
summary: Portable network interface information
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-netifaces-0.11.0-0.src.rpm
location_href: armv7l/python3-netifaces-0.11.0-0.armv7l.rpm
checksum_type: sha256
description:
  netifaces provides a (hopefully portable-ish) way for Python programmers to
  get access to a list of the network interfaces on the local machine, and to
  obtain the addresses of those network interfaces.

  The package has been tested on Mac OS X, Windows XP, Windows Vista, Linux and
  Solaris. On Windows, it is currently not able to retrieve IPv6 addresses,
  owing to shortcomings of the Windows API.

  It should work on other UNIX-like systems provided they implement either
  getifaddrs() or support the SIOCGIFxxx socket options, although the data
  provided by the socket options is normally less complete.


pkgId: 7b7205a6b7908d585dc4c866963114d38fa3d647eff979a260cf89190340fab1
name: python3-opencv
arch: armv7l
version: 4.7.0
epoch: 0
release: 8
summary: OpenCV Python3 Library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: opencv-4.7.0-8.src.rpm
location_href: armv7l/python3-opencv-4.7.0-8.armv7l.rpm
checksum_type: sha256
description:
  The Open Computer Vision Library (Python3) includes various algorithms for computre vision problems.


pkgId: 5f63806aa948e74adbcc02488f725c6cfaa1a810d74929ad58e8dfab43618ce1
name: python3-pathlib2
arch: armv7l
version: 2.3.7.post1
epoch: 0
release: 0
summary: Object-oriented filesystem paths
rpm_license: MIT
rpm_vendor: tizen
rpm_group: devel/python
rpm_sourcerpm: python3-pathlib2-2.3.7.post1-0.src.rpm
location_href: armv7l/python3-pathlib2-2.3.7.post1-0.armv7l.rpm
checksum_type: sha256
description:
  pathlib2 offers a set of classes to handle filesystem paths in an
  object-oriented fashion. This is a backport of the Python 3.4+ pathlib
  module for older Python versions.


pkgId: 1e54bbd73252daa16a05d2b5df3f5e454b2730c4723be460020c14394532c6ce
name: python3-pycparser
arch: armv7l
version: 2.23
epoch: 0
release: 0
summary: C parser in Python
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-pycparser-2.23-0.src.rpm
location_href: armv7l/python3-pycparser-2.23-0.armv7l.rpm
checksum_type: sha256
description:
  pycparser is a complete parser of the C language, written in pure Python using
  the PLY parsing library. It parses C code into an AST and can serve as a
  front-end for C compilers or analysis tools.


pkgId: 4a7ae7b98406832af8c76f0983a160975016aee0fb650227a368acfc1d0ae440
name: python3-pyproject-metadata
arch: noarch
version: 0.10.0
epoch: 0
release: 0
summary: PEP 621 metadata parsing
url: https://github.com/FFY00/python-pyproject-metadata
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-pyproject-metadata-0.10.0-0.src.rpm
location_href: noarch/python3-pyproject-metadata-0.10.0-0.noarch.rpm
checksum_type: sha256
description:
  Dataclass for PEP 621 metadata with support for core metadata generation.

  This project does not implement the parsing of pyproject.toml containing PEP
  621 metadata.  Instead, given a Python data structure representing PEP 621
  metadata (already parsed), it will validate this input and generate a PEP
  643-compliant metadata file (e.g. PKG-INFO).


pkgId: e067100da425405f9ead86a70d13fa7f5265163a69af4cf92d88ac155ab0aad7
name: python3-pytest-repeat
arch: noarch
version: 0.9.4
epoch: 0
release: 1
summary: pytest-repeat is a plugin for pytest
rpm_license: MPL-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-pytest-repeat-0.9.4-1.src.rpm
location_href: noarch/python3-pytest-repeat-0.9.4-1.noarch.rpm
checksum_type: sha256
description:
  pytest-repeat is a plugin for pytest that makes it easy to repeat a single test, or multiple tests, a specific number of times.


pkgId: 0b25c1464c5c538e023ecd729ead985d70759f0a1d65cdd618014563ae791053
name: python3-pytz
arch: armv7l
version: 2025.2
epoch: 0
release: 0
summary: World timezone definitions, modern and historical
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-pytz-2025.2-0.src.rpm
location_href: armv7l/python3-pytz-2025.2-0.armv7l.rpm
checksum_type: sha256
description:
  python-tz brings the Olson tz database into Python.
  This library allows accurate and cross platform timezone calculations
  using Python 2.3 or higher. It also solves the issue of ambiguous times
  at the end of daylight savings, which you can read more about in
  the Python Library Reference (datetime.tzinfo).


pkgId: 16848100535b6a030db530b33f8962a1c5c7419c52bd9b3773c2cc8d7fa1d65b
name: python3-sqlite
arch: armv7l
version: 0.5.4
epoch: 0
release: 0
summary: DB-API 2.0 interface for SQLite 3.x
url: https://github.com/coleifer/pysqlite3
rpm_license: Zlib
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python3-sqlite-0.5.4-0.src.rpm
location_href: armv7l/python3-sqlite-0.5.4-0.armv7l.rpm
checksum_type: sha256
description:
  Python3 interface to SQLite 3
  pysqlite is an interface to the SQLite 3.x embedded relational database engine.
  It is almost fully compliant with the Python3 database API version 2.0 also
  exposes the unique features of SQLite.


pkgId: 9522ca44afc15c2a2b2d8027106240e14fc911c32247bb39030f60652352edbb
name: re2c
arch: armv7l
version: 4.3
epoch: 0
release: 1
summary: Tool for generating C-based recognizers from regular expressions
url: https://re2c.org/
rpm_license: PD
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: re2c-4.3-1.src.rpm
location_href: armv7l/re2c-4.3-1.armv7l.rpm
checksum_type: sha256
description:
  re2c is a tool for writing fast and flexible lexers. Unlike other such
  tools, it concentrates solely on generating efficient code for matching
  regular expressions. This makes it suitable for a wide variety of
  applications. The generated scanners approach hand-crafted ones in
  terms of size and speed.


pkgId: ce7cb3ee0ee05900aacf1496536677f652ff9cb00ecedb7e72a8a28f0961d2b3
name: rnnoise
arch: armv7l
version: 0
epoch: 0
release: 0.4
summary: Recurrent neural network for audio noise reduction
url: https://gitlab.xiph.org/xiph/rnnoise
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rnnoise-0-0.4.src.rpm
location_href: armv7l/rnnoise-0-0.4.armv7l.rpm
checksum_type: sha256
description:
  RNNoise is a noise suppression library based on a recurrent neural network.

  While it is meant to be used as a library, a simple command-line tool is
  provided as an example. It operates on RAW 16-bit (machine endian) mono PCM
  files sampled at 48 kHz. It can be used as:

  ./examples/rnnoise_demo <noisy speech> <output denoised>

  The output is also a 16-bit raw PCM file.


pkgId: ff818f36c96042cb4eb32f48cf3419afe81ef9c0ea912a53d0829734cb270702
name: rsync
arch: armv7l
version: 3.4.1
epoch: 0
release: 1
summary: A program for synchronizing files over a network
url: http://rsync.samba.org/
rpm_license: GPL-3.0-or-later
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: rsync-3.4.1-1.src.rpm
location_href: armv7l/rsync-3.4.1-1.armv7l.rpm
checksum_type: sha256
description:
  Rsync uses a reliable algorithm to bring remote and host files into
  sync very quickly. Rsync is fast because it just sends the differences
  in the files over the network instead of sending the complete
  files. Rsync is often used as a very powerful mirroring process or
  just as a more capable replacement for the rcp command. A technical
  report which describes the rsync algorithm is included in this
  package.


pkgId: bf2b28087adafb477a6965c0d55a0e70e6ba3c0825aeab9c22d8f93d5b4cd3b9
name: rust
arch: armv7l
version: 1.90.0
epoch: 0
release: 1
summary: The Rust Programming Language
url: https://www.rust-lang.org
rpm_license: Apache-2.0 or MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-1.90.0-1.src.rpm
location_href: armv7l/rust-1.90.0-1.armv7l.rpm
checksum_type: sha256
description:
  Rust is a systems programming language that runs blazingly fast, prevents
  segfaults, and guarantees thread safety.

  This package includes the Rust compiler and documentation generator.


pkgId: 64106702959ad5ea128680277794bb60c50f0ef2e29bb3c0b1366955ce407570
name: rust-cfg-if
arch: armv7l
version: 1.0.0
epoch: 0
release: 1
summary: Macro to ergonomically define an item depending on a large number of #[cfg] parameters
url: https://crates.io/crates/cfg-if
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-cfg-if-1.0.0-1.src.rpm
location_href: armv7l/rust-cfg-if-1.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  Macro to ergonomically define an item depending on a large number of #[cfg]
  parameters. Structured like an if-else chain, the first matching branch is the
  item that gets emitted.


pkgId: 87d8c66331c8ece16fa9a4e9be629b6fee5949a65d07228fedb3227dd9f94f91
name: rust-litrs
arch: armv7l
version: 0.4.0
epoch: 0
release: 1
summary: Parse and inspect Rust literals (i.e
url: https://crates.io/crates/litrs
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-litrs-0.4.0-1.src.rpm
location_href: armv7l/rust-litrs-0.4.0-1.armv7l.rpm
checksum_type: sha256
description:
  Parse and inspect Rust literals (i.e. tokens in the Rust programming language
  representing fixed values). Particularly useful for proc macros, but can also
  be used outside of a proc-macro context.


pkgId: 6dd0a1f410e029109fdd09084ff59344167df563e7e7e27a8b727702cbce7594
name: rust-normalize-line-endings
arch: armv7l
version: 0.3.0
epoch: 0
release: 1
url: https://crates.io/crates/normalize-line-endings
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-normalize-line-endings-0.3.0-1.src.rpm
location_href: armv7l/rust-normalize-line-endings-0.3.0-1.armv7l.rpm
checksum_type: sha256
summary:
  Takes an iterator over chars and returns a new iterator with all line endings (\r, \n, or \r\n) as \n

description:
  Takes an iterator over chars and returns a new iterator with all line endings
  (\r, \n, or \r\n) as \n.


pkgId: 848b317d779f0c0ead43055ea45433f7b79a2d74bbedd6104035745fd1bbd60c
name: rust-proc-macro2
arch: armv7l
version: 1.0.51
epoch: 0
release: 1
url: https://crates.io/crates/proc-macro2
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-proc-macro2-1.0.51-1.src.rpm
location_href: armv7l/rust-proc-macro2-1.0.51-1.armv7l.rpm
checksum_type: sha256
summary:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-based libraries from the procedural macro use case

description:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-
  based libraries from the procedural macro use case.


pkgId: e6654f39ededb74ddbfdb4e66ff26261e846c4e34aeb82adf99e8e4cdc59f57d
name: rust-regex
arch: armv7l
version: 1.7.1
epoch: 0
release: 1
summary: Implementation of regular expressions for Rust
url: https://crates.io/crates/regex
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-regex-1.7.1-1.src.rpm
location_href: armv7l/rust-regex-1.7.1-1.armv7l.rpm
checksum_type: sha256
description:
  Implementation of regular expressions for Rust. This implementation uses finite
  automata and guarantees linear time matching on all inputs.


pkgId: 756d37497235a806c68c2c89cbbb93acf8a82b40d87537f2cc20f830427fc6a8
name: rust-scopeguard
arch: armv7l
version: 1.1.0
epoch: 0
release: 1
url: https://crates.io/crates/scopeguard
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-scopeguard-1.1.0-1.src.rpm
location_href: armv7l/rust-scopeguard-1.1.0-1.armv7l.rpm
checksum_type: sha256
summary:
  RAII scope guard that will run a given closure when it goes out of scope, even if the code between panics (assuming unwinding panic)

description:
  RAII scope guard that will run a given closure when it goes out of scope, even
  if the code between panics (assuming unwinding panic).
  Defines the macros `defer!`, `defer_on_unwind!`, `defer_on_success!` as
  shorthands for guards with one of the implemented strategies.


pkgId: 6cde308545e93c2b928df23513b6352a0d07efd461c98e032031ceb308e0d743
name: rust-serde_spanned
arch: armv7l
version: 0.6.1
epoch: 0
release: 1
summary: Native Rust encoder and decoder of TOML-formatted files and streams
url: https://crates.io/crates/serde_spanned
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-serde_spanned-0.6.1-1.src.rpm
location_href: armv7l/rust-serde_spanned-0.6.1-1.armv7l.rpm
checksum_type: sha256
description:
  Native Rust encoder and decoder of TOML-formatted files and streams. Provides
  implementations of the standard Serialize/Deserialize traits for TOML data to
  facilitate deserializing and serializing Rust structures.


pkgId: c4f9a5fcb6e7abf0d693e40f911e4d6cb3a87d9bf6f51ca28ae156c4b2b6fcae
name: rust-stable_deref_trait
arch: armv7l
version: 1.2.0
epoch: 0
release: 1
url: https://crates.io/crates/stable_deref_trait
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-stable_deref_trait-1.2.0-1.src.rpm
location_href: armv7l/rust-stable_deref_trait-1.2.0-1.armv7l.rpm
checksum_type: sha256
summary:
  Unsafe marker trait for types like Box and Rc that dereference to a stable address even when moved, and hence can be used with libraries such as owning_ref and rental

description:
  Unsafe marker trait for types like Box and Rc that dereference to a stable
  address even when moved, and hence can be used with libraries such as
  owning_ref and rental.


pkgId: 1d7c696bea9fe13171c0879018fcf8079fef298b7113f5518fc4a197bc2ced28
name: rust-unicode-ident
arch: armv7l
version: 1.0.6
epoch: 0
release: 1
url: https://crates.io/crates/unicode-ident
rpm_license: (MIT OR Apache-2.0) AND Unicode-DFS-2016
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-unicode-ident-1.0.6-1.src.rpm
location_href: armv7l/rust-unicode-ident-1.0.6-1.armv7l.rpm
checksum_type: sha256
summary:
  Determine whether characters have the XID_Start or XID_Continue properties according to Unicode Standard Annex #31

description:
  Determine whether characters have the XID_Start or XID_Continue properties
  according to Unicode Standard Annex #31.


pkgId: c191f18c05a28ca95f22692b434a8fc10e5e5f19c64dba8b30483f61b03dfed0
name: rust-version-compare
arch: armv7l
version: 0.1.1
epoch: 0
release: 1
url: https://crates.io/crates/version-compare
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-version-compare-0.1.1-1.src.rpm
location_href: armv7l/rust-version-compare-0.1.1-1.armv7l.rpm
checksum_type: sha256
summary:
  Rust library to easily compare version numbers with no specific format, and test against various comparison operators

description:
  Rust library to easily compare version numbers with no specific format, and
  test against various comparison operators.


pkgId: 2a8559118f4defc6f54cb3839d891ae6c49b308bff68b9a9eb536839e384cbcd
name: scons
arch: armv7l
version: 4.4.0
epoch: 0
release: 0
summary: Replacement for Make
url: http://www.scons.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Tools/Building
rpm_sourcerpm: scons-4.4.0-0.src.rpm
location_href: armv7l/scons-4.4.0-0.armv7l.rpm
checksum_type: sha256
description:
  SCons is a make replacement that provides a range of enhanced features,
  such as automated dependency generation and built-in compilation cache
  support. SCons rule sets are Python scripts, which means that SCons
  provides itself as well as the features. SCons allows you to use the
  full power of Python to control compilation.


pkgId: f3b1cad8647430fe06220f9d027acd36281579bdcd26577a07ed2a62108ca4fc
name: sdbd-profile_tv
arch: armv7l
version: 3.0.50
epoch: 0
release: 0
summary: SDB daemon extension for TV
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sdbd-3.0.50-0.src.rpm
location_href: armv7l/sdbd-profile_tv-3.0.50-0.armv7l.rpm
checksum_type: sha256
description:
  SDB daemon extension for TV.
  This changes the service unit files of the default SDB daemon service files.


pkgId: e9ee5beedcd239c3142284f3731210708de1e24c25713a10dee752625697de12
name: security-privilege-manager
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: Privilege Manager API
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.3.1-0.src.rpm
location_href: armv7l/security-privilege-manager-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.


pkgId: 2a4ebb4a095a5ed2d1717281e4e62539ebb1163d2ba1fa3e26e60952adec12d0
name: security-privilege-manager-extension-iot
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen IoT profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.3.1-0.src.rpm
location_href: armv7l/security-privilege-manager-extension-iot-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen IoT profile,
  which requires security-profile-manger to be installed before this.


pkgId: b32fdbaf3f5dc1d849a1afa019258bcc2f15d5413a210552f9d9b437eac4ce0a
name: security-privilege-manager-extension-mobile
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen Mobile profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.3.1-0.src.rpm
location_href: armv7l/security-privilege-manager-extension-mobile-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen Mobile profile,
  which requires security-profile-manger to be installed before this.


pkgId: 8bb3a427f3f2bca64319da832b4b32300cef2affe691a19953c06d61c3d9a896
name: security-privilege-manager-extension-tv
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen TV profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.3.1-0.src.rpm
location_href: armv7l/security-privilege-manager-extension-tv-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen TV profile,
  which requires security-profile-manger to be installed before this.


pkgId: 062adeda279f5d994b2a2070a9572b438cb9abbe4de03f2168822fd7327a2125
name: security-privilege-manager-extension-wearable
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen Wearable profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.3.1-0.src.rpm
location_href: armv7l/security-privilege-manager-extension-wearable-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen Wearable profile,
  which requires security-profile-manger to be installed before this.


pkgId: 27d5e8006a8371ca3105c1d0152ecb6785a9247c5719bf010988f9c88f044efb
name: sensord
arch: armv7l
version: 10.0.0
epoch: 0
release: 1
summary: Sensor daemon
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Sensor Framework
rpm_sourcerpm: sensord-10.0.0-1.src.rpm
location_href: armv7l/sensord-10.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  This package provides the fully functional internal API library and the service daemon
  of the Sensor Framework. The library replaces the dummy library installed by sensord-dummy.


pkgId: 91bac6825e9f862cd569bcb56b2190808e2c847d9759e00772523e9b15a6b867
name: sensord-dummy
arch: armv7l
version: 10.0.0
epoch: 0
release: 1
summary: Sensor Framework 'dummy' library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Sensor Framework
rpm_sourcerpm: sensord-10.0.0-1.src.rpm
location_href: armv7l/sensord-dummy-10.0.0-1.armv7l.rpm
checksum_type: sha256
description:
  This package provides the dummy library of the sensor internal API.
  Installing sensord replaces this dummy library with the actually functional library.


pkgId: ec05bf0b734865fad8f29709fb3895ca6c55d7d5897f8b0714cc1d2b463ccc3a
name: sgml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 0
summary: Common SGML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Applications/Text
rpm_sourcerpm: sgml-common-0.6.3-0.src.rpm
location_href: noarch/sgml-common-0.6.3-0.noarch.rpm
checksum_type: sha256
description:
  The sgml-common package contains a collection of entities and DTDs
  that are useful for processing SGML, but that don't need to be
  included in multiple packages.  Sgml-common also includes an
  up-to-date Open Catalog file.


pkgId: 9488638bd91cde3c410343423e623032357dc9620d22db46a7c9c9d52ce97ea8
name: shared-mime-info
arch: armv7l
version: 1.7
epoch: 0
release: 0
summary: Shared MIME Database
url: http://freedesktop.org/wiki/Software/shared-mime-info
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Base/Configuration
rpm_sourcerpm: shared-mime-info-1.7-0.src.rpm
location_href: armv7l/shared-mime-info-1.7-0.armv7l.rpm
checksum_type: sha256
description:
  This package contains:

  - The freedesktop.org shared MIME database spec.

  - The merged GNOME and KDE databases, in the new format.

  - The update-mime-database command, used to install new MIME data.


pkgId: 7eb76663d64432fc26c991bb012aa7470936977237cc2c875dd6f0284f98d3b8
name: snappy-devel
arch: armv7l
version: 1.1.7
epoch: 0
release: 0
summary: Development files for snappy
url: https://github.com/google/snappy/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: snappy-1.1.7-0.src.rpm
location_href: armv7l/snappy-devel-1.1.7-0.armv7l.rpm
checksum_type: sha256
description:
  Snappy is a compression/decompression library. It does not aim for maximum
  compression, or compatibility with any other compression library; instead, it
  aims for very high speeds and reasonable compression. For instance, compared to
  the fastest mode of zlib, Snappy is an order of magnitude faster for most
  inputs, but the resulting compressed files are anywhere from 20% to 100%
  bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy
  compresses at about 250 MB/sec or more and decompresses at about
  500 MB/sec or more.

  This package holds the development files for snappy.


pkgId: b28bc2fd77d620558bea618537ba176f9515c39f3a92ebd95ff96b395de6e1a7
name: snpe-devel
arch: armv7l
version: 1.53.2
epoch: 0
release: 1
summary: development package for snpe-dummy
rpm_license: BSD-2-Clause
rpm_vendor: tizen
rpm_group: Machine Learning/ML Framework
rpm_sourcerpm: snpe-1.53.2-1.src.rpm
rpm_packager: Sangjung Woo <sangjung.woo@samsung.com>
location_href: armv7l/snpe-devel-1.53.2-1.armv7l.rpm
checksum_type: sha256
description:
  This package in public Tizen.org is DUMMY (no contents) to keep the build system
  running w/o actual SNPE packages.


pkgId: bdd5dc996f2196a6fe82e9da70c34c960642643ccccb1320fb306ab9ddb88dc1
name: soundtouch
arch: armv7l
version: 2.1.0
epoch: 0
release: 0
summary: Audio processing library
url: https://gitlab.com
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Libraries
rpm_sourcerpm: soundtouch-2.1.0-0.src.rpm
location_href: armv7l/soundtouch-2.1.0-0.armv7l.rpm
checksum_type: sha256
description:
  Soundtouch is an audio processing library that allows changing
  the sound tempo, pitch and playback rate parameters independently from eash other.


pkgId: e35144f63f2a49d3260171697efcef543d3348e83506cb1d44f3d1270ea12898
name: sqlcipher
arch: armv7l
version: 4.6.1
epoch: 0
release: 0
url: https://github.com/sqlcipher/sqlcipher
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Security/Crypto Libraries
rpm_sourcerpm: sqlcipher-4.6.1-0.src.rpm
location_href: armv7l/sqlcipher-4.6.1-0.armv7l.rpm
checksum_type: sha256
summary:
  SQLCipher is an open source extension to SQLite that provides transparent 256-bit AES encryption of database files

description:
  SQLCipher is an open source library that provides transparent, secure 256-bit
  AES encryption of SQLite database files. SQLCipher has been adopted as a secure
  database solution by many commercial and open source products, making it one of
  the most popular encrypted database platforms for Mobile, Embedded, and Desktop
  applications.


pkgId: 593dfbbce404ca3e9b4d3e2bd79cb8b4ed60a2c74ffde501b0c8bce42540d337
name: ssat
arch: armv7l
version: 1.4.0
epoch: 0
release: 0
summary: Shell Script Automated Tester
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: ssat-1.4.0-0.src.rpm
rpm_packager: MyungJoo Ham <myungjoo.ham@samsung.com>
location_href: armv7l/ssat-1.4.0-0.armv7l.rpm
checksum_type: sha256
description:
  SSAT provides testing environment for shell scripts with Apache-2.0 license.
  This is created to avoid any complications related with GPL licenses.


pkgId: e8244695741bb52182ef77389f28ffddbd3fb3ef53dd9c4391e75d3d9e8b6dd2
name: sshfs
arch: armv7l
version: 2.10
epoch: 0
release: 0
summary: A network filesystem client to connect to SSH servers
url: https://github.com/libfuse/sshfs
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Base/File Systems
rpm_sourcerpm: sshfs-2.10-0.src.rpm
location_href: armv7l/sshfs-2.10-0.armv7l.rpm
checksum_type: sha256
description:
  SSHFS (Secure SHell FileSystem) allows you to mount a remote filesystem
  using SFTP. Now that most SSH servers support and enable this SFTP access
  by default, the SSHFS is very simple to use. It means that there is nothing
  to do on the server-side. Note that SSHFS requires FUSE (Filesystem in
  USErspace) filesystem, that lets non-privileged users create own file systems
  without editing Linux kernel code.


pkgId: 435579a9a1eb77e411b1482d3758a5ab1384ba60ea66a2076bfab2669b0aceed
name: strace
arch: armv7l
version: 6.6
epoch: 0
release: 0
summary: A utility to trace the system calls of a program
url: http://sourceforge.net/projects/strace/
rpm_license: LGPL-2.1+ and GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: strace-6.6-0.src.rpm
location_href: armv7l/strace-6.6-0.armv7l.rpm
checksum_type: sha256
description:
  With strace, you can trace the activity of a program.  Information
  about any system calls the program makes and the signals it receives
  and processes can be seen.  Child processes can also be tracked.


pkgId: ef04307ec020af85eaaa06b49eb167ff2302c2b23afe76b036f6df81fef090f3
name: sudo
arch: armv7l
version: 1.9.17p2
epoch: 0
release: 0
summary: Execute some commands as root
url: http://www.sudo.ws/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sudo-1.9.17p2-0.src.rpm
location_href: armv7l/sudo-1.9.17p2-0.armv7l.rpm
checksum_type: sha256
description:
  Sudo is a command that allows users to execute some commands as root.
  The /etc/sudoers file (edited with 'visudo') specifies which users have
  access to sudo and which commands they can run. Sudo logs all its
  activities to syslogd, so the system administrator can keep an eye on
  things. Sudo asks for the password for initializing a check period of a
  given time N (where N is defined at installation and is set to 5
  minutes by default).


pkgId: f5b7af6eb30536d2fba723179c7946ad02f426ef2f94239b6c8492f0337df7b9
name: sudo-rpm
arch: armv7l
version: 1.9.17p2
epoch: 0
release: 0
summary: Script making possible to run RPM as root from inside build
url: http://www.sudo.ws/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sudo-1.9.17p2-0.src.rpm
location_href: armv7l/sudo-rpm-1.9.17p2-0.armv7l.rpm
checksum_type: sha256
description:
  The package will add ALL ALL = (root) NOPASSWD: /usr/bin/rpm to sudoers and
  makes possible to install packages from inside build.


pkgId: f7cf422c0d089fff26423a907416aea518175b42a85a30843d2d56a37e1d4eca
name: swig
arch: armv7l
version: 4.0.2
epoch: 0
release: 0
summary: Simplified Wrapper and Interface Generator
url: http://www.swig.org/
rpm_license: GPL-3.0+ and BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/C and C++
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: armv7l/swig-4.0.2-0.armv7l.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.


pkgId: 934cc07842e3f9f9bf3eaa935e51d8acad8a59733328354d68e8eb8549007ba5
name: swig-doc
arch: noarch
version: 4.0.2
epoch: 0
release: 0
summary: SWIG Manual
url: http://www.swig.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Documentation/Man
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: noarch/swig-doc-4.0.2-0.noarch.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.

  This package contains the SWIG manual.


pkgId: 37ba29e06c7bf3c771f02f53062b02f4367b594fbdf2ead1f5974b43ece33fe0
name: swig-examples
arch: armv7l
version: 4.0.2
epoch: 0
release: 0
summary: SWIG example files
url: http://www.swig.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Documentation/Howto
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: armv7l/swig-examples-4.0.2-0.armv7l.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.

  This package contains SWIG examples, useful both for testing and
  understandig SWIG usage.


pkgId: b3a330ba3f1a1c549c614df497f32db325ba9c851e8b889e9cdf19c775112205
name: system-rw-update
arch: armv7l
version: 1.3.0
epoch: 0
release: 0
summary: System RW Update Manager
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: system-rw-update-1.3.0-0.src.rpm
location_href: armv7l/system-rw-update-1.3.0-0.armv7l.rpm
checksum_type: sha256
description:
  System RW update manager provides interface for running platform/application update scripts
  after software is updated to new version which is implemented by using systemd offline update.


pkgId: 3ff87631f8fff2a4d1df9ebaa1975db056b435db391d60253e9d9747ab2704b0
name: system-servant-profile_common
arch: armv7l
version: 0.2.2
epoch: 0
release: 1
summary: System-servant configured for common profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: system-servant-0.2.2-1.src.rpm
location_href: armv7l/system-servant-profile_common-0.2.2-1.armv7l.rpm
checksum_type: sha256
description:
  System-popup (system-servant) configured for common profile.
  The binary is shared between common/tv.


pkgId: 915df3b60fb4ae03d11ce672161855105df2971eec7bc2b5a319edfc8ee06f43
name: systemd
arch: armv7l
version: 244
epoch: 0
release: 0
summary: A System and Service Manager
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+ and GPL-2.0+
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: armv7l/systemd-244-0.armv7l.rpm
checksum_type: sha256
description:
  systemd is a system and service manager for Linux, compatible with
  SysV and LSB init scripts. systemd provides aggressive parallelization
  capabilities, uses socket and D-Bus activation for starting services,
  offers on-demand starting of daemons, keeps track of processes using
  Linux cgroups, supports snapshotting and restoring of the system
  state, maintains mount and automount points and implements an
  elaborate transactional dependency-based service control logic. It can
  work as a drop-in replacement for sysvinit.


pkgId: 6e351ca8235c08e552de355d57d44d1bbd237a9227568ea050a8ab432dcd1f2d
name: systemd-analyze
arch: armv7l
version: 244
epoch: 0
release: 0
summary: Tool for processing systemd profiling information
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: armv7l/systemd-analyze-244-0.armv7l.rpm
checksum_type: sha256
description:
  'systemd-analyze blame' lists which systemd unit needed how much time to finish
  initialization at boot.
  'systemd-analyze plot' renders an SVG visualizing the parallel start of units
  at boot.


pkgId: 1abfc37060efcdb5716a2cca1b28b672c9e97a201f5a405615f4074c98df41dc
name: systemd-tests
arch: armv7l
version: 244
epoch: 0
release: 0
summary: Set of tests for sd-bus component
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+ and BSD-2-Clause
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: armv7l/systemd-tests-244-0.armv7l.rpm
checksum_type: sha256
description:
  This package is part of 'dbus-integratnion-tests' framework and contains set of tests
  for sd-bus component (DBUS API C library).


pkgId: c9a57705a356d1ec8d6df15432cc68800cc5bce7a1eeb935f1fb1351c9992c84
name: sz2-devel
arch: armv7l
version: 1.0.1
epoch: 0
release: 0
summary: Development files for libsz2
url: https://gitlab.dkrz.de/k202009/libaec
rpm_license: BSD-2-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: libaec-1.0.1-0.src.rpm
location_href: armv7l/sz2-devel-1.0.1-0.armv7l.rpm
checksum_type: sha256
description:
  Header files for libsz2, a drop-in replacement for the
  SZIP library (http://www.hdfgroup.org/doc_resource/SZIP).


pkgId: 31f103e884ca1688b35417811de857f734a7d627c63f8fab5033d11c5ce1886f
name: tayga
arch: armv7l
version: 0.9.2
epoch: 0
release: 1
summary: Simple, no-fuss NAT64 for Linux
url: http://www.litech.org/tayga/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Tools
rpm_sourcerpm: tayga-0.9.2-1.src.rpm
location_href: armv7l/tayga-0.9.2-1.armv7l.rpm
checksum_type: sha256
description:
  TAYGA is an out-of-kernel stateless NAT64 implementation for Linux that uses
  the TUN driver to exchange IPv4 and IPv6 packets with the kernel.
  It is intended to provide production-quality NAT64 service for networks
  where dedicated NAT64 hardware would be overkill.


pkgId: 26368b87ae39fbe7615d1f953530641cf929b5f5ef1bc908b52ecb0d345f7f07
name: tcpdump
arch: armv7l
version: 4.9.3
epoch: 0
release: 1
summary: A Packet Sniffer
url: http://www.tcpdump.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Productivity/Networking/Diagnostic
rpm_sourcerpm: tcpdump-4.9.3-1.src.rpm
location_href: armv7l/tcpdump-4.9.3-1.armv7l.rpm
checksum_type: sha256
description:
  This program can "read" all or only certain packets going over the
  ethernet. It can be used to debug specific network problems.


pkgId: e1bd0a712774be28ae954e33fc238f98ab14cb5be134b980ee42b0b7bf87f7db
name: tizen-debug
arch: armv7l
version: 2.40
epoch: 0
release: 1
summary: libc debug information with .debug_frame section only and ld debug information
rpm_license: LGPL-2.1+ and LGPL-2.1+-with-GCC-exception and GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: tizen-debug-2.40-1.src.rpm
location_href: armv7l/tizen-debug-2.40-1.armv7l.rpm
checksum_type: sha256
description:
  The package contains the libc.so debug library with .debug_frame section only
  which can be helpful during signal frame backtrace.
  Also, the ld.so debug information is included for the debugging convenience.


pkgId: b6f77cbef86b261a9b6e5cfd703c8f4273b629ba802f008ec1494fd47f075170
name: tlm
arch: armv7l
version: 1.0.3
epoch: 0
release: 1
summary: Login manager for Tizen
url: https://github.com/01org/tlm
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: System/Service
rpm_sourcerpm: tlm-1.0.3-1.src.rpm
location_href: armv7l/tlm-1.0.3-1.armv7l.rpm
checksum_type: sha256
description:
  TLM is a daemon that handles user logins in a multi-user, multi-seat system by
  authenticating the users through PAM, and setting up, launching, and tracking
  user sessions.


pkgId: a178560351515c8ecd5f142163fe695d8b6c90e0f0a972c9de4971202a276e46
name: tolua++
arch: armv7l
version: 1.0.93
epoch: 0
release: 0
summary: C/C++ with Lua Integration Tool
url: http://www.codenix.com/~tolua/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: tolua++-1.0.93-0.src.rpm
location_href: armv7l/tolua++-1.0.93-0.armv7l.rpm
checksum_type: sha256
description:
  tolua++ is an extended version of tolua, a tool to integrate C/C++ code with
  Lua. tolua++ includes new features oriented to c++ such as:
  * support for std::string as a basic type (this can be turned off by a command
    line option)
  * support for class templates
  as well as other features and bugfixes.


pkgId: d7ec76a261dc80930121215381837c29196d4e7470d7b2f345e322c2f374524e
name: toybox
arch: armv7l
version: 0.6.0
epoch: 0
release: 1
summary: Single binary providing simplified versions of system commands
url: http://www.landley.net/toybox/
rpm_license: BSD-2.0
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: toybox-0.6.0-1.src.rpm
location_href: armv7l/toybox-0.6.0-1.armv7l.rpm
checksum_type: sha256
description:
  Toybox is a single binary which includes versions of a large number
  of system commands, including a shell.  This package can be very
  useful for recovering from certain types of system failures,
  particularly those involving broken shared libraries.


pkgId: 11186e414d5d2e7ad5382136edd8ad4276b5bbc1bdd84b07c1e180d0a5f0dac3
name: trust-anchor
arch: armv7l
version: 2.1.2
epoch: 0
release: 0
summary: Trust Anchor API
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Security/Certificate Management
rpm_sourcerpm: trust-anchor-2.1.2-0.src.rpm
location_href: armv7l/trust-anchor-2.1.2-0.armv7l.rpm
checksum_type: sha256
description:
  The package provides trust-anchor which the application can assign
  SSL root certificates for its HTTPS communication.


pkgId: b3595d3f5e6be8fd3ad5f566cef55fdbb3e899d851b0526979aa957be8fbe61f
name: tvm-runtime
arch: armv7l
version: 0.7.0
epoch: 0
release: 0
summary: TVM Runtime Library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: tvm-runtime-0.7.0-0.src.rpm
location_href: armv7l/tvm-runtime-0.7.0-0.armv7l.rpm
checksum_type: sha256
description:
  Apache TVM is a compiler stack for deep learning systems. It is designed to close the gap between the productivity-focused deep learning frameworks, and the performance- and efficiency-focused hardware backends. TVM works with deep learning frameworks to provide end to end compilation to different backends.


pkgId: 9adaa7676d4b2f3f69981fd122a862318f5fa90c1463ba2010f7e2708be77de7
name: typelib-1_0-Atspi-2_0
arch: armv7l
version: 2.44.1
epoch: 0
release: 1
summary: An Accessibility ToolKit -- Introspection bindings
url: http://www.gnome.org/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: at-spi2-core-2.44.1-1.src.rpm
location_href: armv7l/typelib-1_0-Atspi-2_0-2.44.1-1.armv7l.rpm
checksum_type: sha256
description:
  AT-SPI is a general interface for applications to make use of the
  accessibility toolkit. This version is based on dbus.

  This package provides the GObject Introspection bindings for the
  libatspi library.


pkgId: 4fe23017fa2346547d86964cf48bac2880466bd90c1d284432d6dd4214a0b7ab
name: typelib-Json
arch: armv7l
version: 1.8.0
epoch: 0
release: 0
summary: Introspection bindings for libjson-glib
url: https://wiki.gnome.org/Projects/JsonGlib
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: json-glib-1.8.0-0.src.rpm
location_href: armv7l/typelib-Json-1.8.0-0.armv7l.rpm
checksum_type: sha256
description:
  JSON-GLib provides a parser and a generator GObject classes and various
  wrappers for the complex data types employed by JSON, such as arrays
  and objects.

  This package provides the GObject Introspection bindings for JSON-GLib.


pkgId: 91f9b1a271007ec114ec2cfc28ca149f8352f8e6a80c5e67145c201bb2e40790
name: typelib-Soup
arch: armv7l
version: 2.72.0
epoch: 0
release: 1
summary: HTTP client/server library for GNOME -- Introspection bindings
url: http://www.gnome.org
rpm_license: LGPL-2.0+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: libsoup-2.72.0-1.src.rpm
location_href: armv7l/typelib-Soup-2.72.0-1.armv7l.rpm
checksum_type: sha256
description:
  Libsoup is an HTTP client/server library for GNOME. It uses GObjects
  and the glib main loop, to integrate well with GNOME applications.

  This package provides the GObject Introspection bindings for libsoup.


pkgId: ad2b22c7d5bb81e348b3e03905dc846dbf67d68a1c53a74525d16995022bf575
name: u-boot-tools
arch: armv7l
version: 2025.10
epoch: 0
release: 0
summary: Companion tools for Das U-Boot bootloader
url: https://source.denx.de/u-boot/u-boot.git
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Kernel
rpm_sourcerpm: u-boot-2025.10-0.src.rpm
location_href: armv7l/u-boot-tools-2025.10-0.armv7l.rpm
checksum_type: sha256
description:
  This package includes the mkimage program, which allows generation of U-Boot
  images in various formats, and the fw_printenv and fw_setenv programs to read
  and modify U-Boot's environment.


pkgId: a950d46f7b840195578e50de44aa3e274b1ceacf870590fa212c45ed44559076
name: united-service
arch: armv7l
version: 1.3.1
epoch: 0
release: 0
summary: United Service
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: App Framework/Application Core
rpm_sourcerpm: united-service-1.3.1-0.src.rpm
location_href: armv7l/united-service-1.3.1-0.armv7l.rpm
checksum_type: sha256
description:
  United service is to integrate multiple currently independent daemons into one process
  to improve management efficiency, optimize resource usage, and ensure consistency between services.


pkgId: 794ca3eb9dfa7e67a57b12997257b26a225017c8a8f36879f50ebb1fe20d8a72
name: update-desktop-files
arch: noarch
version: 12.1
epoch: 0
release: 0
summary: A Build Tool to Update Desktop Files
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: update-desktop-files-12.1-0.src.rpm
location_href: noarch/update-desktop-files-12.1-0.noarch.rpm
checksum_type: sha256
description:
  This package provides further translations and a shell script to update
  desktop files. It is used by the %tizen_update_desktop_file rpm macro.


pkgId: 66099a311e0b19f32fb8482b15d9931429d736f1fd392c65bd177c6ff0f0ed15
name: upgrade-parse-dynparts
arch: armv7l
version: 10.0.0
epoch: 0
release: 0
summary: Utility needed to parse dynamic partition on-disk format
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: armv7l/upgrade-parse-dynparts-10.0.0-0.armv7l.rpm
checksum_type: sha256
description:
  This package provides utility needed to parse "super" on-disk format, and print
  out necessary device mapper maps, needed to later mount filesystems contained in
  dynamic partition area.


pkgId: 18907edc694c0ffad32a61dcf8bae65d52fecbd2453ac64de41c0a7b1bb326d5
name: upgrade-resize-dynparts
arch: armv7l
version: 10.0.0
epoch: 0
release: 0
summary: Utility for modification of dynamic partitions size in super metadata
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: armv7l/upgrade-resize-dynparts-10.0.0-0.armv7l.rpm
checksum_type: sha256
description:
  This package provides utility needed to modify metadata of a super partition by
  changing size of dynamic partitions.


pkgId: 20df49e792ea492e84c499cac20deb80bbe62738e159209e4bd72775c5910234
name: upgrade-ro
arch: armv7l
version: 10.0.0
epoch: 0
release: 0
summary: Contains all necessary tools to perform RO Upgrade
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: armv7l/upgrade-ro-10.0.0-0.armv7l.rpm
checksum_type: sha256
description:
  Update engine adding all necessary tools, scripts and configuration
  for updating Tizen platform images using delta files as generated by
  upgrade-tools.


pkgId: 2814982a5a846609ba0ae9a17955528bcd6fb7bcf5ff8b49e7ccb081dde2f524
name: usb-modeswitch
arch: armv7l
version: 2.2.6
epoch: 0
release: 2
summary: USB Modeswitch gets mobile broadband cards in operational mode
url: http://www.draisberghof.de/usb_modeswitch/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: System/Tools
rpm_sourcerpm: usb-modeswitch-2.2.6-2.src.rpm
location_href: armv7l/usb-modeswitch-2.2.6-2.armv7l.rpm
checksum_type: sha256
description:
  USB Modeswitch brings up your datacard into operational mode. When plugged
  in they identify themselves as cdrom and present some non-Linux compatible
  installation files. This tool deactivates this cdrom-devices and enables
  the real communication device. It supports most devices built and
  sold by Huawei, T-Mobile, Vodafone, Option, ZTE, Novatel.


pkgId: 7e54a3d7afe7aa7c15614cf3998ab1da8b427b53335bb5661d0332b30e26c631
name: valgrind
arch: armv7l
version: 3.25.0
epoch: 0
release: 0
summary: Memory Management Debugger
url: http://valgrind.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools/Debuggers
rpm_sourcerpm: valgrind-3.25.0-0.src.rpm
location_href: armv7l/valgrind-3.25.0-0.armv7l.rpm
checksum_type: sha256
description:
  Valgrind checks all memory operations in an application, like read,
  write, malloc, new, free, and delete. Valgrind can find uses of
  uninitialized memory, access to already freed memory, overflows,
  illegal stack operations, memory leaks, and any illegal
  new/malloc/free/delete commands. Another program in the package is
  "cachegrind," a profiler based on the valgrind engine.

  To use valgrind you should compile your application with "-g -O0"
  compiler options. Afterwards you can use it with:

  valgrind --tool=memcheck --sloppy-malloc=yes --leak-check=yes
  --db-attach=yes my_application, for example.

  More valgrind options can be listed via "valgrind --help". A
  debugged application runs slower and needs much more memory, but
  is usually still usable. Valgrind is still in development, but it
  has been successfully used to optimize several KDE applications.


pkgId: 928f870954146cc6695036da68f734f20bf5ac45aa0581ebe1a06e3d7bfa72ad
name: vconf-internal-keys-config-profile_common
arch: armv7l
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for common
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_common-0.0.199-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for common
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 55682c31c79cd11c285463e4c6e4e206c6246f9bbb9241622ce5769451f03f6d
name: vconf-internal-keys-config-profile_ivi
arch: armv7l
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for ivi
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_ivi-0.0.199-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for ivi
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 7ae5c12e57af0ca8eae6ee7ffb234e387ca0aed6d4bc632734bec57eda80efc4
name: vconf-internal-keys-config-profile_mobile
arch: armv7l
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for mobile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_mobile-0.0.199-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for mobile.
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 762bdbe6cef30d1740d0e9f19ec0b0582f98f4dd466769a924fe5bb917bba285
name: vconf-internal-keys-config-profile_tv
arch: armv7l
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for tv
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_tv-0.0.199-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for tv
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 3f54992cde184bdb632766389b6fdf1fd5a0e12d990d15381b48bbec599fd84d
name: vconf-internal-keys-config-profile_wearable
arch: armv7l
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for wearable
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: armv7l/vconf-internal-keys-config-profile_wearable-0.0.199-0.armv7l.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for wearable
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 2ee1e45860b56a979b013cadfb22d5f26e647b9b1e51080794775de8b76d80b5
name: verity-tools
arch: armv7l
version: 2.2
epoch: 0
release: 1
summary: A tool for dm-verity
rpm_license: MIT
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: initrd-2.2-1.src.rpm
location_href: armv7l/verity-tools-2.2-1.armv7l.rpm
checksum_type: sha256
description:
  verityctl tool for dm-verity. Similar with veritysetup of cryptsetup
  but it can handle with verity meta data block.


pkgId: bec4a9f8b9c11be7fe178fd649c5245da82fd16f713fb17f689c3930347ee4a7
name: vi
arch: armv7l
version: 050325
epoch: 0
release: 1
summary: The Traditional Vi
url: http://ex-vi.sourceforge.net/
rpm_license: BSD-4-Clause-UC and BSD-4-Clause-Caldera
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: vi-050325-1.src.rpm
location_href: armv7l/vi-050325-1.armv7l.rpm
checksum_type: sha256
description:
  Compared to most of its many clones, the traditional vi is a rather small
  program just with its extremely powerful editing interface, but lacking fancy
  features like multiple undo, multiple screens, or syntax highlighting.
  This port of vi has generally preserved the original style, terminal control,
  and feature set. It adds support for international character sets, including
  multibyte encodings such as UTF-8, and some minor enhancements that were not
  present in BSD vi 3.7, but had been included in later vi versions for System V
  or in POSIX.2.


pkgId: 4e363f1c982082d918240232d49a5807e16a8d349572033af37494d7ee3fbdbd
name: vpx-tools
arch: armv7l
version: 1.12.0
epoch: 0
release: 2
summary: VP8 codec library - Utilities
url: http://www.webmproject.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Multimedia/Libraries
rpm_sourcerpm: libvpx-1.12.0-2.src.rpm
location_href: armv7l/vpx-tools-1.12.0-2.armv7l.rpm
checksum_type: sha256
description:
  This package contains utilities around the vp8 codec sdk.

  WebM is an open, royalty-free, media file format designed for the web.

  WebM defines the file container structure, video and audio formats.
  WebM files consist of video streams compressed with the VP8 video codec
  and audio streams compressed with the Vorbis audio codec.
  The WebM file structure is based on the Matroska container.


pkgId: a4a72be26bffe5ee3c67e8d63e1f7bdbc1d89ac01abd058b8dd9cc5fc050c6ca
name: vulkan-loader-devel
arch: armv7l
version: 1.3.296
epoch: 0
release: 0
summary: Development files for vulkan-loader
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-loader-1.3.296-0.src.rpm
location_href: armv7l/vulkan-loader-devel-1.3.296-0.armv7l.rpm
checksum_type: sha256
description:
  The vulkan-loader-devel package contains libraries and header files for
  developing applications that use vulkan-loader.


pkgId: 942e55d6e3c1bd1468ab24be88432144e180d999e1c99b137637ac9e68de9594
name: vulkan-utility-libraries
arch: armv7l
version: 1.3.296
epoch: 0
release: 0
summary: Vulkan utility libraries
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-utility-libraries-1.3.296-0.src.rpm
location_href: armv7l/vulkan-utility-libraries-1.3.296-0.armv7l.rpm
checksum_type: sha256
description:
  This repo was created to share code across various Vulkan repositories,
  solving long standing issues for Vulkan SDK developers and users.


pkgId: 0c6272cbd942dcd1b2c00920c4765544d542f644cd238c6759ecc7cfcb9f6f5e
name: vulkan-validation-layers-devel
arch: armv7l
version: 1.3.296
epoch: 0
release: 0
summary: Development files for vulkan-validation-layers
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-validation-layers-1.3.296-0.src.rpm
location_href: armv7l/vulkan-validation-layers-devel-1.3.296-0.armv7l.rpm
checksum_type: sha256
description:
  The vulkan-validation-layers-devel package contains libraries and header files for
  developing applications that use vulkan-validation-layers.


pkgId: d881fec5f7b4549ef35559455be998f137caa7b36afd2bf2241c89a79a6cfe8c
name: wayland-devel
arch: armv7l
version: 1.23.1
epoch: 0
release: 0
summary: Development files for the Wayland Compositor Infrastructure
url: http://wayland.freedesktop.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-1.23.1-0.src.rpm
location_href: armv7l/wayland-devel-1.23.1-0.armv7l.rpm
checksum_type: sha256
description:
  Wayland is a protocol for a compositor to talk to its clients as well
  as a C library implementation of that protocol. The compositor can be
  a standalone display server running on Linux kernel modesetting and
  evdev input devices, an X application, or a wayland client itself.
  The clients can be traditional applications, X servers (rootless or
  fullscreen) or other display servers.

  This package contains all necessary include files and libraries needed
  to develop applications that require these.


pkgId: b735eb90bd3c584b0c2b64c08cf9e592efdf523c43b71394362f307c1d196592
name: wayland-extension-client-devel
arch: armv7l
version: 1.3.76
epoch: 0
release: 0
summary: Client development files for the Wayland Extension Protocol
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.76-0.src.rpm
location_href: armv7l/wayland-extension-client-devel-1.3.76-0.armv7l.rpm
checksum_type: sha256
description:
  wayland-extension is a protocol for tizen window system.

  This package contains all necessary include files and libraries needed
  to develop applications that require these.


pkgId: 333894adf1687a5fddb710fc5e080fadcf6a6276fc09d434413f2d5650974883
name: wayland-extension-server-devel
arch: armv7l
version: 1.3.76
epoch: 0
release: 0
summary: Server development files for the Wayland Extension Protocol
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.76-0.src.rpm
location_href: armv7l/wayland-extension-server-devel-1.3.76-0.armv7l.rpm
checksum_type: sha256
description:
  wayland-extension is a protocol for tizen window system.

  This package contains all necessary include files and libraries needed
  to develop a compositor that require these.


pkgId: 78fb6f863953229c1aa4e3879ab08e6792e6ce7e3a9b930d95726da7a948c6e4
name: wayland-protocols
arch: armv7l
version: 1.3.76
epoch: 0
release: 0
summary: Wayland upstream protocols
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.76-0.src.rpm
location_href: armv7l/wayland-protocols-1.3.76-0.armv7l.rpm
checksum_type: sha256
description:
  wayland-protocols contains Wayland upstream protocols that add functionality not available in the Wayland core protocol


pkgId: 6f6d3cde4adc9a99e6a6e2c346d5c6ed3e6a50e1c6c9d2e96354021f8b1fd0c0
name: wdiff
arch: armv7l
version: 1.2.2
epoch: 0
release: 1
summary: Display Word Differences Between Text Files
url: https://ftp.gnu.org/gnu/wdiff/
rpm_license: GPL-3.0+
rpm_vendor: tizen
rpm_group: Productivity/Text/Utilities
rpm_sourcerpm: wdiff-1.2.2-1.src.rpm
location_href: armv7l/wdiff-1.2.2-1.armv7l.rpm
checksum_type: sha256
description:
  wdiff compares two files and finds which words have been deleted or
  added to old_file to get new_file. A word is considered to be anything
  between whitespace.

  Xwdiff is a handy X Window System front-end, based on Tcl/Tk.


pkgId: e84b1323a35515f6f90aa76dcb2f9fd1f77161d88956f0a9217ffc85b951080d
name: webauthn-ble-manual-tests
arch: armv7l
version: 1.0.8
epoch: 0
release: 1
summary: Adaptation Layer of Web Authentication Service for BLE Authenticator (manual test)
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Security/Development
rpm_sourcerpm: webauthn-ble-1.0.8-1.src.rpm
location_href: armv7l/webauthn-ble-manual-tests-1.0.8-1.armv7l.rpm
checksum_type: sha256
description:
  Adaptation Layer of Web Authentication Service for BLE Authenticator (manual test)
  The webauthn-manual-tests required to use webauthn-image-viewer


pkgId: f53e1292df8f55254c8cc28761cf7bcfde17e43da0b9dff7b067c6dfc1d0160d
name: webrtc-audio-processing
arch: armv7l
version: 0.3.1
epoch: 0
release: 2
summary: Library for echo cancellation
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: webrtc-audio-processing-0.3.1-2.src.rpm
location_href: armv7l/webrtc-audio-processing-0.3.1-2.armv7l.rpm
checksum_type: sha256
description:
  webrtc-audio-processing is a library derived from Google WebRTC project that
  provides echo cancellation functionality. This library is used by for example
  PulseAudio to provide echo cancellation.


pkgId: e1cd9890bc1dd5ce2a8fd01f4ef5e830e4188435c3bbcf07758689abd45afcb3
name: webrtc-audio-processing-devel
arch: armv7l
version: 0.3.1
epoch: 0
release: 2
summary: Development files for webrtc-audio-processing
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: webrtc-audio-processing-0.3.1-2.src.rpm
location_href: armv7l/webrtc-audio-processing-devel-0.3.1-2.armv7l.rpm
checksum_type: sha256
description:
  The webrtc-audio-processing-devel package contains libraries and header
  files for developing applications that use webrtc-audio-processing.


pkgId: 848c38eb2849c55eb10c9855fb0c643291f8d7fe5aeb61bc1bcafce39363b9be
name: wireless-regdb
arch: armv7l
version: 2013.01.11
epoch: 0
release: 0
summary: Linux wireless regulatory database
url: http://wireless.kernel.org/en/developers/Regulatory/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: wireless-regdb-2013.01.11-0.src.rpm
location_href: armv7l/wireless-regdb-2013.01.11-0.armv7l.rpm
checksum_type: sha256
description:
  This package contains the wireless regulatory database used by all
  cfg80211 based Linux wireless drivers. The wireless database being
  used is maintained by John Linville, the Linux wireless kernel maintainer
  http://wireless.kernel.org/en/developers/Regulatory/


pkgId: b2038a36332a1d5ecbff39c2aaacc4d18794ad7c26c28626c7b70ed77b93f2db
name: wpa_supplicant
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: WPA supplicant implementation
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  wpa_supplicant is an implementation of the WPA Supplicant component,
  i.e., the part that runs in the client stations. It implements key
  negotiation with a WPA Authenticator and it controls the roaming and
  IEEE 802.11 authentication/association of the wlan driver.


pkgId: 4fae80b1a8dd340c9736516f34ad37b7a390b5536a184a62a6d347ca9bbaf6c5
name: wpa_supplicant-client_tool
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: Text-based client tool for wpa_supplicant and hostapd
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-client_tool-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  Text-based frontend programs for interacting with wpa_supplicant and hostapd.
  It is used to query current status, change configuration,
  trigger events, and request interactive user input.


pkgId: 7c371014118a6d0bd5188d10fbcb5a48e5f6b2a50aeee079bf9fc03ca9614f76
name: wpa_supplicant-extension-TM1
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: Extension for mobile TM1
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-extension-TM1-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  Customized wpa_supplicant supporting SPRD-based boards including TM1.
  Having such ifdefs in public Tizen is really ugly, but for the sake
  of backward-compatibility, we have this subpackage. Please remove
  such variations later.


pkgId: b273ab7c005e59145b307e32cf2ed2d79b027598f34d07bd48cdde8ebb41a5a2
name: wpa_supplicant-extension-TM2
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: Extension for mobile TM2
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-extension-TM2-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  Customized wpa_supplicant supporting BROADCOM-based boards including TM1.
  Having such ifdefs in public Tizen is really ugly, but for the sake
  of backward-compatibility, we have this subpackage. Please remove
  such variations later.


pkgId: bc41983abe1a3f88791927b7c03973d41b97ee5481f5d0543fc1b4e887c59876
name: wpa_supplicant-profile_tv
arch: armv7l
version: 2.10
epoch: 0
release: 2
summary: Patched wpa_supplicant for TV
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: armv7l/wpa_supplicant-profile_tv-2.10-2.armv7l.rpm
checksum_type: sha256
description:
  TV-profile somehow wants to disable WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE
  unconditionally at wpa_supplicant/wpa_supplicant.c. It should later be
  determined at runtime/boottime, not at buildtime.


pkgId: 2c5f05e34906bc5ac4d865bca3105e69ff3a95c61e8a0727b0e97ef70e993895
name: xdelta3
arch: armv7l
version: 3.0.11
epoch: 0
release: 1
summary: The xdelta3
url: http://xdelta.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: xdelta3-3.0.11-1.src.rpm
location_href: armv7l/xdelta3-3.0.11-1.armv7l.rpm
checksum_type: sha256
description:
  Xdelta3 is a set of tools designed to compute changes between
  binary files.  These changes (delta files) are similar to the output of the
  "diff" program, in that they may be used to store and transmit only the
  changes between files.  The "delta files" that Xdelta3 manages are
  stored in RFC3284 (VCDIFF) format.


pkgId: 2f1134212c64b80469204c119aadae4c5f4fec7b08bfdb15a79155ae4ef9cbf6
name: xkeyboard-config
arch: armv7l
version: 2.13
epoch: 0
release: 0
summary: The X Keyboard Extension
url: http://www.freedesktop.org/Software/XKeyboardConfig
rpm_license: MIT
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: xkeyboard-config-2.13-0.src.rpm
location_href: armv7l/xkeyboard-config-2.13-0.armv7l.rpm
checksum_type: sha256
description:
  The X Keyboard Extension essentially replaces the core protocol
  definition of keyboard. The extension makes possible to clearly and
  explicitly specify most aspects of keyboard behaviour on per-key basis
  and to more closely track the logical and physical state of the
  keyboard. It also includes a number of keyboard controls designed to
  make keyboards more accessible to people with physical impairments.


pkgId: e70e56557b1ea539b84096c8e1e5c33e7f65e82db4010c6c5cdbc58f1cb8e0a2
name: xml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 0
summary: Common XML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Applications/Text
rpm_sourcerpm: sgml-common-0.6.3-0.src.rpm
location_href: noarch/xml-common-0.6.3-0.noarch.rpm
checksum_type: sha256
description:
  The xml-common is a subpackage of sgml-common which contains
  a collection XML catalogs that are useful for processing XML,
  but that don't need to be included in main package.


pkgId: 393b03d8115c81b1c9fbf1af37333e6313f794eef634242b2d0e68cd1be5dfe3
name: xmlto
arch: armv7l
version: 0.0.28
epoch: 0
release: 0
summary: Tool for Converting XML Files to Various Formats
url: https://fedorahosted.org/xmlto/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Productivity/Publishing/XML
rpm_sourcerpm: xmlto-0.0.28-0.src.rpm
location_href: armv7l/xmlto-0.0.28-0.armv7l.rpm
checksum_type: sha256
description:
  This is a package for converting XML files to various formats using XSL
  stylesheets.  As a processor it depends on xsltproc and as a formatter
  for print output it makes use of passivetex.


pkgId: eb2e25180e466e8d83270cf4e00ddde677e252f774db5730cda007dcd6726021
name: yum
arch: noarch
version: 3.4.3
epoch: 0
release: 0
summary: RPM package installer/updater/manager
url: http://yum.baseurl.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: yum-3.4.3-0.src.rpm
location_href: noarch/yum-3.4.3-0.noarch.rpm
checksum_type: sha256
description:
  Yum is a utility that can check for and automatically download and
  install updated RPM packages. Dependencies are obtained and downloaded
  automatically, prompting the user for permission as necessary.


pkgId: 2d1c1952903a4be9d0dafb24c3605003af0e3339169ec0444af15b999106edc1
name: zbar
arch: armv7l
version: 0.10
epoch: 0
release: 23
summary: Bar code reader
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zbar-0.10-23.src.rpm
location_href: armv7l/zbar-0.10-23.armv7l.rpm
checksum_type: sha256
description:
  A layered barcode scanning and decoding library. Supports EAN, UPC, Code 128,
  Code 39 and Interleaved 2 of 5.
  Includes applications for decoding captured barcode images and using a video
  device (eg, webcam) as a barcode scanner.


pkgId: 8a5f9dc93b9760cf6e598436f911b6a0fec86ad7a89a47b1c5073012aa1de5af
name: zbar-devel
arch: armv7l
version: 0.10
epoch: 0
release: 23
summary: Bar code library extra development files
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zbar-0.10-23.src.rpm
location_href: armv7l/zbar-devel-0.10-23.armv7l.rpm
checksum_type: sha256
description:
  This package contains header files and additional libraries used for
  developing applications that read bar codes with this library.


pkgId: 8cfcd1447e76a4f1933c57fa86e8a96a539443c26dbfa3aaaf764facd190bf24
name: zint
arch: armv7l
version: 2.6.7
epoch: 0
release: 2
summary: Barcode generator library
url: http://www.zint.org.uk
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zint-2.6.7-2.src.rpm
location_href: armv7l/zint-2.6.7-2.armv7l.rpm
checksum_type: sha256
description:
  Zint is a C library for encoding data in several barcode variants. The
  bundled command-line utility provides a simple interface to the library.
  Features of the library:
  - Over 50 symbologies including all ISO/IEC standards, like QR codes.
  - Unicode translation for symbologies which support Latin-1 and
    Kanji character sets.
  - Full GS1 support including data verification and automated insertion of
    FNC1 characters.
  - Support for encoding binary data including NULL (ASCII 0) characters.
  - Health Industry Barcode (HIBC) encoding capabilities.
  - Output in the following file formats: PNG, GIF, EPS, WMF, BMP, TIF, SVG.
  - Verification stage for SBN, ISBN and ISBN-13 data.


pkgId: 949a5ab1dcaa648bf0e78df47a7a5b3a8fb46fcaf229f63fabc84d4e82193852
name: zint-devel
arch: armv7l
version: 2.6.7
epoch: 0
release: 2
summary: Library and header files for zint
url: http://www.zint.org.uk
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zint-2.6.7-2.src.rpm
location_href: armv7l/zint-devel-2.6.7-2.armv7l.rpm
checksum_type: sha256
description:
  C library and header files needed to develop applications that use
  the Zint library. The API documentation can be found on the project website:
  http://www.zint.org.uk/zintSite/Manual.aspx


pkgId: 0422ce9b67aeee85deaaa490de3aac1cc889f8029e8d327d176aaf15434cd1f9
name: zypper
arch: armv7l
version: 1.14.38
epoch: 0
release: 0
summary: Command line software manager using libzypp
url: http://en.opensuse.org/Zypper
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Package Management
rpm_sourcerpm: zypper-1.14.38-0.src.rpm
location_href: armv7l/zypper-1.14.38-0.armv7l.rpm
checksum_type: sha256
description:
  Zypper is a command line tool for managing software. It can be used to add
  package repositories, search for packages, install, remove, or update packages,
  install patches, hardware drivers, verify dependencies, and more.

  Zypper can be used interactively or non-interactively by user, from scripts,
  or front-ends.

  Authors:
  --------
      Jan Kupec <jkupec@suse.cz>
      Duncan Mac-Vicar <dmacvicar@suse.de>
      Martin Vidner <mvidner@suse.cz>
      Josef Reidinger <jreidinger@suse.cz>


pkgId: 7514daa6919805de7e3553ccc3863e57357427a2d04d667fe161981faf0327e1
name: zypper-tizen-config
arch: noarch
version: 1.14.38
epoch: 0
release: 0
summary: zypper repo configuration for Tizen:Unified developers
url: http://en.opensuse.org/Zypper
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Packages
rpm_sourcerpm: zypper-1.14.38-0.src.rpm
location_href: noarch/zypper-tizen-config-1.14.38-0.noarch.rpm
checksum_type: sha256
description:
  Zypper repo configuration for Tizen:Unified developers.
  This is for Tizen device and platform development.


# files

type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/perf/scripts/python/bin/event_analyzing_sample-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/perf/scripts/python/bin/event_analyzing_sample-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-check-branches.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-get-cpus-script.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale-ftrace.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-recheck-refscale.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-remote-noreap.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/event_analyzing_sample-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/event_analyzing_sample-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/export-to-postgresql-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/export-to-postgresql-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/syscall-counts-by-pid-record


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/perf/scripts/python/bin/syscall-counts-by-pid-report


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/config_override.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/console-badness.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kcsan-collapse.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-assign-cpus.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-check-branches.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-get-cpus-script.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale-ftrace.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-refscale.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-recheck-scf.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-remote-noreap.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh


type: file
name:
  /boot/kernel/devel/kernel-devel-arm-rpi4-rt/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/coco_labels_list.txt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.2.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.2.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.3.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.3.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_result_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_result_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov10_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov10_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_track_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_obb_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_obb_decoder_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_custom/unittest_filter_custom.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_python3/unittest_filter_python3.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_reload/tensor_filter_reload_test.c


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.2


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/unittest_filter_tensorflow2_lite.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_repo_dynamicity/tensor_repo_dynamic_test.c


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/labels/google_lenet_ncsdk_caffe_1.labels


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/google_lenet_ncsdk_caffe_1.graph


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/invalid_class_custom_converter.py


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v1_1.0_224_quant.invalid


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v1_1.0_224_quant.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v2_1.0_224_quant.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/multi_person_mobilenet_v1_075_float.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/ncnn_models/squeezenet_v1.1.bin


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/ncnn_models/squeezenet_v1.1.param


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/openvino_mobilenetv2-int8-tf-0001.bin


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/openvino_mobilenetv2-int8-tf-0001.xml


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_3x4_two_input_two_output.pt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_3x4_two_input_two_output.pte


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.pt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.pte


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.tflite


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_batched.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_batched_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/bn_channels_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/bn_channels_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/bn_width_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_dilation.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_dilation.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/dropout_0_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/dropout_100_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/dropout_20_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/dropout_20_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/embedding_mixed_double_batch.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/embedding_mixed_single_batch.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/embedding_w32a32_single_batch.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_act.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_seq.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/gru_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/grucell_reset_after_single_step.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/grucell_reset_after_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/lstm_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/lstmcell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_output_shape.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_output_shape_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_return_attention_scores.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_return_attention_scores_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_single_batch.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_single_batch_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_value_dim.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_value_dim_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_partial.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_partial_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_layers/rnncell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/bidirectional_lstm_single.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/bidirectional_lstm_stacked.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/fc_unroll_stacked_clipped.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/gru_reset_after_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_gru_reset_after_return_sequence.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_gru_reset_after_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_gru_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_gru_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_disable_need_weights.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_kdim_vdim.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_self_attention.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_lstm_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_lstm_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_rnn_return_sequence_with_batch.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/multi_rnn_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/pooling_avg_same_padding_multi_stride.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/pooling_max_same_padding_multi_stride.info


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/split_axis2_split_number2.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/split_axis2_split_number4.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/split_axis3_split_number5.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/transformer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_100.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_000.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_050.nnmodelgolden


type: file
name:
  /usr/lib/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_100.nnmodelgolden


type: file
name:
  /usr/lib/python3.14/site-packages/SCons/Tool/docbook/docbook-xsl-1.76.1/tools/bin/docbook-xsl-update


type: file
name:
  /usr/share/wgt-installer-ut/test_samples/smoke/ManifestDirectInstallMode/smokewgt40/bin/smokewgt40.ManifestDirectInstallMode


type: file
name:
  /usr/share/wgt-installer-ut/test_samples/smoke/ManifestDirectInstallMode_Hybrid/smokehyb12/bin/service2


type: file
name:
  /usr/share/wgt-installer-ut/test_samples/smoke/ManifestDirectInstallMode_Hybrid/smokehyb12/bin/smokehyb12.ManifestDirectInstallModeHybrid


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_none/config.xml


type: dir
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_use_decoration_invalid


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_use_decoration_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_mouse_event_not_bool/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_height_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_height_ood/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_width_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_touch_effect_not_bool/config.xml


