# packages

pkgId: 79f8f0dd8769f79c810e4f9592a160d68b83513e945a7adf3e5866799d615ab9
name: perl-MRO-Compat
arch: x86_64
version: 0.15
epoch: 0
release: 1
summary: Routines for manipulating stashes
url: https://metacpan.org/pod/MRO::Compat
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-MRO-Compat-0.15-1.src.rpm
location_href: x86_64/perl-MRO-Compat-0.15-1.x86_64.rpm
checksum_type: sha256
description:
  The "mro" namespace provides several utilities for dealing
  with method resolution order and method caching in general
  in Perl 5.9.5 and higher.
  This module provides those interfaces for earlier
  versions of Perl (back to 5.6.0 anyways).

  It is a harmless no-op to use this module on 5.9.5+.
  That is to say, code which properly uses MRO::Compat
  will work unmodified on both older Perls and 5.9.5+.

  If you're writing a piece of software that would like
  to use the parts of 5.9.5+'s mro:: interfaces that are
  supported here, and you want compatibility
  with older Perls, this is the module for you.

  Some parts of this code will work better and/or faster
  with Class::C3::XS installed (which is an optional
  prereq of Class::C3, which is in turn a prereq of
  this package), but it's not a requirement.

  This module never exports any functions.
  All calls must be fully qualified with the mro:: prefix.

  The interface documentation here serves only as a quick
  reference of what the function basically does, and what
  differences between MRO::Compat and 5.9.5+ one should look out for.
  The main docs in 5.9.5's mro are the real interface docs,
  and contain a lot of other useful information.


pkgId: cb3a6f4506647b23cc6659d3f033a0e4aceb717788334cdb4da72d15be54cc00
name: perl-Module-Runtime
arch: x86_64
version: 0.016
epoch: 0
release: 1
summary: runtime module handling
url: https://metacpan.org/pod/Module::Runtime
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Module-Runtime-0.016-1.src.rpm
location_href: x86_64/perl-Module-Runtime-0.016-1.x86_64.rpm
checksum_type: sha256
description:
  The functions exported by this module deal with runtime handling of Perl modules,
  which are normally handled at compile time. This module avoids using any other modules,
  so that it can be used in low-level infrastructureb.

  The parts of this module that work with module names apply the same syntax
  that is used for barewords in Perl source. In principle this syntax can
  vary between versions of Perl, and this module applies the syntax of
  the Perl on which it is running. In practice the usable syntax hasn't changed yet.
  There's some intent for Unicode module names to be supported in the future,
  but this hasn't yet amounted to any consistent facility.

  The functions of this module whose purpose is to load modules include workarounds
  for three old Perl core bugs regarding require. These workarounds are applied on any Perl version
  where the bugs exist, except for a case where one of the bugs cannot be adequately worked around in pure Perl.


pkgId: 84136185ac9c8f13b3f71a6c4d9c7bb7764107189f3038b35f23cb794ba4c6bb
name: perl-Net-DBus
arch: x86_64
version: 1.2.0
epoch: 0
release: 1
summary: Perl extension for the DBus message system
url: http://search.cpan.org/dist/Net-DBus/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Net-DBus-1.2.0-1.src.rpm
location_href: x86_64/perl-Net-DBus-1.2.0-1.x86_64.rpm
checksum_type: sha256
description:
  Net::DBus provides a Perl API for the DBus message system. The DBus Perl
  interface is currently operating against the 0.32 development version of
  DBus, but should work with later versions too, providing the API changes
  have not been too drastic.

  Users of this package are either typically, service providers in which case
  the the Net::DBus::Service manpage and the Net::DBus::Object manpage
  modules are of most relevance, or are client consumers, in which case the
  Net::DBus::RemoteService manpage and the Net::DBus::RemoteObject manpage
  are of most relevance.


pkgId: 24a89d4a5756d44669836d1ed27fe46f02add0f9036bd08c7f0abe9b5cb6e041
name: perl-Package-Stash
arch: x86_64
version: 0.40
epoch: 0
release: 1
summary: Routines for manipulating stashes
url: https://metacpan.org/pod/Package::Stash
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Package-Stash-0.40-1.src.rpm
location_href: x86_64/perl-Package-Stash-0.40-1.x86_64.rpm
checksum_type: sha256
description:
  Manipulating stashes (Perl's symbol tables) is occasionally
  necessary, but incredibly messy, and easy to get wrong.
  This module hides all of that behind a simple API.

  NOTE: Most methods in this class require a variable specification
  that includes a sigil. If this sigil is absent, it is assumed
  to represent the IO slot.

  Due to limitations in the typeglob API available to perl code,
  and to typeglob manipulation in perl being quite slow, this module
  provides two implementations - one in pure perl, and one using XS.
  The XS implementation is to be preferred for most usages; the pure
  perl one is provided for cases where XS modules are not a possibility.
  The current implementation in use can be set by setting
  $ENV{PACKAGE_STASH_IMPLEMENTATION} or $Package::Stash::IMPLEMENTATION
  before loading Package::Stash (with the environment variable
  taking precedence), otherwise, it will use the XS implementation
  if possible, falling back to the pure perl one.


pkgId: 194e13cc344838bb10407872ba4d100cd239c96d61b8f78f3d43ad9d80a3f89d
name: perl-Params-ValidationCompiler
arch: x86_64
version: 0.31
epoch: 0
release: 1
summary: Build an optimized subroutine parameter validator once, use it forever
url: https://metacpan.org/pod/Params::ValidationCompiler
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Params-ValidationCompiler-0.31-1.src.rpm
location_href: x86_64/perl-Params-ValidationCompiler-0.31-1.x86_64.rpm
checksum_type: sha256
description:
  This module creates a customized, highly efficient
  parameter checking subroutine. It can handle named
  or positional parameters, and can return the
  parameters as key/value pairs or a list of values.

  In addition to type checks, it also supports
  parameter defaults, optional parameters, and
  extra "slurpy" parameters.


pkgId: f0455709a1055891529fe83d8809be115f885d42de4c10405a0c391e047a263a
name: perl-Path-Tiny
arch: x86_64
version: 0.150
epoch: 0
release: 0
summary: File path utility
url: https://metacpan.org/release/Path-Tiny
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Path-Tiny-0.150-0.src.rpm
location_href: x86_64/perl-Path-Tiny-0.150-0.x86_64.rpm
checksum_type: sha256
description:
  This module provides a small, fast utility for working with file paths. It
  is friendlier to use than File::Spec and provides easy access to functions
  from several other core file handling modules. It aims to be smaller and
  faster than many alternatives on CPAN, while helping people do many common
  things in consistent and less error-prone ways.

  Path::Tiny does not try to work for anything except Unix-like and Win32
  platforms. Even then, it might break if you try something particularly
  obscure or tortuous. (Quick! What does this mean:
  '///../../..//./././a//b/.././c/././'? And how does it differ on Win32?)

  All paths are forced to have Unix-style forward slashes. Stringifying the
  object gives you back the path (after some clean up).

  File input/output methods 'flock' handles before reading or writing, as
  appropriate (if supported by the platform and/or filesystem).

  The '*_utf8' methods ('slurp_utf8', 'lines_utf8', etc.) operate in raw
  mode. On Windows, that means they will not have CRLF translation from the
  ':crlf' IO layer. Installing Unicode::UTF8 0.58 or later will speed up
  '*_utf8' situations in many cases and is highly recommended. Alternatively,
  installing PerlIO::utf8_strict 0.003 or later will be used in place of the
  default ':encoding(UTF-8)'.

  This module depends heavily on PerlIO layers for correct operation and thus
  requires Perl 5.008001 or later.


pkgId: 30eab9ed1352398be211b335550b027a360a0c5063611103114c0e09c225c931
name: perl-Specio
arch: x86_64
version: 0.48
epoch: 0
release: 1
summary: Base class for type libraries
url: https://metacpan.org/pod/Specio::Exporter
rpm_license: Artistic-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Specio-0.48-1.src.rpm
location_href: x86_64/perl-Specio-0.48-1.x86_64.rpm
checksum_type: sha256
description:
  Inheriting from this package makes your package a type exporter.
  By default, types defined in a package are never visible outside
  of the package. When you inherit from this package, all the types
  you define internally become available via exports.

  The exported types are available through the importing package's t subroutine.

  By default, types your package imports are not re-exported:

   package MyApp::Type::Library;

   use parent 'Specio::Exporter';

   use Specio::Declare;
   use Specio::Library::Builtins;

  In this case, the types provided by Specio::Library::Builtins are not
  exported to packages which use MyApp::Type::Library.

  You can explicitly ask for types to be re-exported:

    package MyApp::Type::Library;

    use parent 'Specio::Exporter';

    use Specio::Declare;
    use Specio::Library::Builtins -reexport;

  In this case, packages which use MyApp::Type::Library will get
  all the types from Specio::Library::Builtins as well as any
  types defined in MyApp::Type::Library.


pkgId: c474458cf3ed6120e2ef99669f9f093f4f4584f5e1b71ac3794847f13de4529e
name: perl-Sub-Exporter-Progressive
arch: x86_64
version: 0.001013
epoch: 0
release: 1
summary: Only use Sub::Exporter if you need it
url: https://metacpan.org/pod/Sub::Exporter::Progressive
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Sub-Exporter-Progressive-0.001013-1.src.rpm
location_href: x86_64/perl-Sub-Exporter-Progressive-0.001013-1.x86_64.rpm
checksum_type: sha256
description:
  Sub::Exporter is an incredibly powerful module, but with that power
  comes great responsibility, er- as well as some runtime penalties.
  This module is a Sub::Exporter wrapper that will let your users just
  use Exporter if all they are doing is picking exports, but use Sub::Exporter
  if your users try to use Sub::Exporter's more advanced features,
  like renaming exports, if they try to use them.

  Note that this module will export @EXPORT, @EXPORT_OK and %EXPORT_TAGS
  package variables for Exporter to work. Additionally, if your package
  uses advanced Sub::Exporter features like currying, this module will
  only ever use Sub::Exporter, so you might as well use it directly.


pkgId: 678168d3d0c5e949ac8f759519fed8704978c407f10476bad845a98f6637e53d
name: perl-Sub-Identify
arch: x86_64
version: 0.14
epoch: 0
release: 1
summary: Retrieve names of code references
url: https://metacpan.org/pod/Sub::Identify
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Sub-Identify-0.14-1.src.rpm
location_href: x86_64/perl-Sub-Identify-0.14-1.x86_64.rpm
checksum_type: sha256
description:
  Sub::Identify allows you to retrieve the real name of code references.
  It provides six functions, all of them taking a code reference.
  sub_name returns the name of the code reference passed as an argument
  (or __ANON__ if it's an anonymous code reference), stash_name
  returns its package, and sub_fullname returns the concatenation of the two.

  get_code_info
  returns a list of two elements, the package and the subroutine name
  (in case of you want both and are worried by the speed.)

  In case of subroutine aliasing, those functions always return the original name.
  get_code_location returns a two-element list containing the file name
  and the line number where the subroutine has been defined.

  is_sub_constant returns a boolean value indicating whether
  the subroutine is a constant or not.


pkgId: 20b0c23827fc31388b3b5c1e5c65137181355f3db7cb7ba354658f872fc69677
name: perl-Switch
arch: noarch
version: 2.17
epoch: 0
release: 1
summary: A switch statement for Perl
url: http://search.cpan.org/dist/Switch/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Switch-2.17-1.src.rpm
location_href: noarch/perl-Switch-2.17-1.noarch.rpm
checksum_type: sha256
description:
  The Switch.pm module implements a generalized case mechanism that covers
  most (but not all) of the numerous possible combinations of switch and case
  values described above.

  The module augments the standard Perl syntax with two new control
  statements: 'switch' and 'case'. The 'switch' statement takes a single
  scalar argument of any type, specified in parentheses. 'switch' stores this
  value as the current switch value in a (localized) control variable. The
  value is followed by a block which may contain one or more Perl statements
  (including the 'case' statement described below). The block is
  unconditionally executed once the switch value has been cached.


pkgId: 25c8680b38bb29cf80010354eaded35b39944c663a4d9d6ac71aee8c2988d166
name: perl-Term-Table
arch: x86_64
version: 0.023
epoch: 0
release: 0
summary: Format a header and rows into a table
url: https://metacpan.org/release/Term-Table
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Term-Table-0.023-0.src.rpm
location_href: x86_64/perl-Term-Table-0.023-0.x86_64.rpm
checksum_type: sha256
description:
  This is used by some failing tests to provide diagnostics about what has
  gone wrong. This module is able to format rows of data into tables.


pkgId: ab3939df7d72f4eb1449ac66bc77ae3572b990d3417bd07bcc1337c42c56549f
name: perl-Test2-Suite
arch: x86_64
version: 1.302216
epoch: 0
release: 0
summary: Distribution with a rich set of tools built upon the Test2 framework
url: https://metacpan.org/release/Test2-Suite
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: perl-Test2-Suite-1.302216-0.src.rpm
location_href: x86_64/perl-Test2-Suite-1.302216-0.x86_64.rpm
checksum_type: sha256
description:
  Rich set of tools, plugins, bundles, etc built upon the Test2 testing
  library. If you are interested in writing tests, this is the distribution
  for you.


pkgId: 7007ab19ef0c9e9148b5e8faa4bc9ad61788a94e721027411d5965b1095e2511
name: perl-Try-Tiny
arch: x86_64
version: 0.32
epoch: 0
release: 1
summary: Minimal try/catch with proper preservation of $@
url: https://metacpan.org/pod/Try::Tiny
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Try-Tiny-0.32-1.src.rpm
location_href: x86_64/perl-Try-Tiny-0.32-1.x86_64.rpm
checksum_type: sha256
description:
  This module provides bare bones try/catch/finally statements that are
  designed to minimize common mistakes with eval blocks, and NOTHING else.

  This is unlike TryCatch which provides a nice syntax and avoids adding
  another call stack layer, and supports calling return from the try block
  to return from the parent subroutine. These extra features come
  at a cost of a few dependencies, namely Devel::Declare and Scope::Upper
  which are occasionally problematic, and the additional catch filtering
  uses Moose type constraints which may not be desirable either.

  The main focus of this module is to provide simple and reliable error
  handling for those having a hard time installing TryCatch, but who still
  want to write correct eval blocks without 5 lines of boilerplate each time.

  It's designed to work as correctly as possible in light of the various
  pathological edge cases (see "BACKGROUND") and to be compatible with
  any style of error values (simple strings, references, objects, overloaded
  objects, etc).

  If the try block dies, it returns the value of the last statement executed
  in the catch block, if there is one. Otherwise, it returns undef in scalar
  context or the empty list in list context. The following examples
  all assign "bar" to $x:

  my $x = try { die "foo" } catch { "bar" };
  my $x = try { die "foo" } || "bar";
  my $x = (try { die "foo" }) // "bar";

   my $x = eval { die "foo" } || "bar";
   You can add finally blocks, yielding the following:

   my $x;
   try { die 'foo' } finally { $x = 'bar' };
   try { die 'foo' } catch { warn "Got a die: $_" } finally { $x = 'bar' };

   finally blocks are always executed making them suitable for cleanup code
   which cannot be handled using local. You can add as many finally blocks
   to a given try block as you like.

   Note that adding a finally block without a preceding catch block suppresses
   any errors. This behaviour is consistent with using a standalone eval,
   but it is not consistent with try/finally patterns found in other programming
   languages, such as Java, Python, Javascript or C#. If you learned
   the try/finally pattern from one of these languages, watch out for this.


pkgId: 5ef2cff38e5a09ce75ff83b661696a68ec3c954c91d17cbfcac08e200d6d467d
name: perl-Variable-Magic
arch: x86_64
version: 0.64
epoch: 0
release: 1
summary: Associate user-defined magic to variables from Perl.
url: https://metacpan.org/pod/Variable::Magic
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-Variable-Magic-0.64-1.src.rpm
location_href: x86_64/perl-Variable-Magic-0.64-1.x86_64.rpm
checksum_type: sha256
description:
  Magic is Perl's way of enhancing variables. This mechanism
  lets the user add extra data to any variable and hook
  syntactical operations (such as access, assignment or destruction)
  that can be applied to it. With this module, you can add
  your own magic to any variable without having to write a single line of XS.

  You'll realize that these magic variables look a lot like tied variables.
  It is not surprising, as tied variables are implemented as a special
  kind of magic, just like any 'irregular' Perl variable : scalars like $!,
  $( or $^W, the %ENV and %SIG hashes, the @ISA array, vec() and substr()
  lvalues, threads::shared variables... They all share the same underlying
  C API, and this module gives you direct access to it.


pkgId: b592a339f3ad185fc049f7fcdb3c4e5b1417199cb0cb5cd764a145eb1368181b
name: perl-XML-LibXML
arch: x86_64
version: 2.0210
epoch: 0
release: 0
summary: Perl Binding for libxml2
url: http://search.cpan.org/dist/XML-LibXML/
rpm_license: Artistic License ..
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-LibXML-2.0210-0.src.rpm
location_href: x86_64/perl-XML-LibXML-2.0210-0.x86_64.rpm
checksum_type: sha256
description:
  This module implements a Perl interface to the Gnome libxml2 library which
  provides interfaces for parsing and manipulating XML files. This module allows
  Perl programmers to make use of the highly capable validating XML parser and
  the high performance DOM implementation.

  Authors:
  	Matt Sergeant, Christian Glahn, Petr Pajas


pkgId: 9eb3061c50bafc9129f8f28dd09d2443dd70ff529a99103aebe73d4c45ea5d77
name: perl-XML-NamespaceSupport
arch: x86_64
version: 1.12
epoch: 0
release: 0
summary: Simple Generic Namespace Processor
url: http://search.cpan.org/dist/XML-NamespaceSupport/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-NamespaceSupport-1.12-0.src.rpm
location_href: x86_64/perl-XML-NamespaceSupport-1.12-0.x86_64.rpm
checksum_type: sha256
description:
  This module offers a simple to process namespaced XML names (unames) from
  within any application that may need them. It also helps maintain a prefix
  to namespace URI map, and provides a number of basic checks.

  The model for this module is SAX2's NamespaceSupport class, readable at
  http://www.saxproject.org/namespaces.html It adds a few perlisations where
  we thought it appropriate.


pkgId: b1348320e1fcb12ba16c51805fc30cb0388933f1824b880224d5a54e5cddf464
name: perl-XML-SAX
arch: x86_64
version: 1.02
epoch: 0
release: 6
summary: XML::SAX Perl Module
url: http://www.cpan.org/modules/by-module/XML/
rpm_license: Artistic License ..
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-SAX-1.02-6.src.rpm
location_href: x86_64/perl-XML-SAX-1.02-6.x86_64.rpm
checksum_type: sha256
description:
  XML::SAX consists of several framework classes for using and building
  Perl SAX2 XML parsers, filters, and drivers. It is designed around the
  need to be able to "plug in" different SAX parsers to an application
  without requiring programmer intervention. Those of you familiar with
  the DBI will be right at home. Some of the designs come from the Java
  JAXP specification (SAX part), only without the javaness.


pkgId: 8ca0580000b3c7f1b92f53e717acc667ad59061d7289b9fc8dc2d7619576484a
name: perl-XML-SAX-Base
arch: x86_64
version: 1.09
epoch: 0
release: 0
summary: Base class SAX Drivers and Filters
url: http://search.cpan.org/dist/XML-SAX-Base/
rpm_license: Artistic-1.0 or GPL-1.0+
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-SAX-Base-1.09-0.src.rpm
location_href: x86_64/perl-XML-SAX-Base-1.09-0.x86_64.rpm
checksum_type: sha256
description:
  This module has a very simple task - to be a base class for PerlSAX drivers
  and filters. It's default behaviour is to pass the input directly to the
  output unchanged. It can be useful to use this module as a base class so
  you don't have to, for example, implement the characters() callback.

  The main advantages that it provides are easy dispatching of events the
  right way (ie it takes care for you of checking that the handler has
  implemented that method, or has defined an AUTOLOAD), and the guarantee
  that filters will pass along events that they aren't implementing to
  handlers downstream that might nevertheless be interested in them.


pkgId: 00416a236a924e073fc9796780367cf47c2deedbb363497cbd00fda8772f771a
name: perl-XML-Twig
arch: x86_64
version: 3.52
epoch: 0
release: 1
summary: Tree interface to XML documents
url: http://search.cpan.org/dist/XML::Twig
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-XML-Twig-3.52-1.src.rpm
location_href: x86_64/perl-XML-Twig-3.52-1.x86_64.rpm
checksum_type: sha256
description:
  XML::Twig is (yet another!) XML transformation module.

  Its strong points: can be used to process huge documents while still
  being in tree mode; not bound by DOM or SAX, so it is very perlish and
  offers a very comprehensive set of methods; simple to use; DWIMs as
  much as possible

  What it doesn't offer: full SAX support (it can export SAX, but only
  reads XML), full XPath support (unless you use XML::Twig::XPath), nor
  DOM support.

  Other drawbacks: it is a big module, and with over 500 methods
  available it can be a bit overwhelming. A good starting point is the
  tutorial at http://xmltwig.com/xmltwig/tutorial/index.html. In fact the
  whole XML::Twig page at http://xmltwig.com/xmltwig/ has plenty of
  information to get you started with XML::Twig


pkgId: 5a2fb87b0c04c28e595147a04b7fbd17004d41f63616f863ed82e9648635609b
name: perl-YAML
arch: x86_64
version: 1.31
epoch: 0
release: 0
summary: YAML Ain't Markup Language (tm)
url: http://search.cpan.org/dist/YAML/
rpm_license: GPL-1.0+ or Artistic-1.0
rpm_vendor: tizen
rpm_group: Development/Libraries/Perl
rpm_sourcerpm: perl-YAML-1.31-0.src.rpm
location_href: x86_64/perl-YAML-1.31-0.x86_64.rpm
checksum_type: sha256
description:
  The YAML.pm module implements a YAML Loader and Dumper based on the YAML
  1.0 specification. the http://www.yaml.org/spec/ manpage

  YAML is a generic data serialization language that is optimized for human
  readability. It can be used to express the data structures of most modern
  programming languages. (Including Perl!!!)

  For information on the YAML syntax, please refer to the YAML specification.


pkgId: 295a34e756e614d494638ead704637f4b37d8e6a91bae187e814bcc8548d9310
name: perl-namespace-autoclean
arch: x86_64
version: 0.31
epoch: 0
release: 1
summary: Keep imports out of your namespace
url: https://metacpan.org/pod/namespace::autoclean
rpm_license: perl_5
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-namespace-autoclean-0.31-1.src.rpm
location_href: x86_64/perl-namespace-autoclean-0.31-1.x86_64.rpm
checksum_type: sha256
description:
  When you import a function into a Perl package, it will naturally also be available as a method.
  The namespace::autoclean pragma will remove all imported symbols at the end of the current package's
  compile cycle. Functions called in the package itself will still be bound by their name,
  but they won't show up as methods on your class or instances.
  This module is very similar to namespace::clean, except it will clean all imported functions,
  no matter if you imported them before or after you used the pragma.
  It will also not touch anything that looks like a method.
  If you're writing an exporter and you want to clean up after yourself (and your peers),
  you can use the -cleanee switch to specify what package to clean:

  package My::MooseX::namespace::autoclean;
  use strict;

  use namespace::autoclean (); # no cleanup, just load

  sub import {
      namespace::autoclean->import(
        -cleanee => scalar(caller),
      );
  }


pkgId: bd42fd9d4add296fe9f40944cbcd4f088f614a52d4fd6811757ace27bb5e8904
name: perl-namespace-clean
arch: x86_64
version: 0.27
epoch: 0
release: 1
summary: Keep imports and functions out of your namespace
url: https://metacpan.org/pod/namespace::clean
rpm_license: Artistic-1.0 OR GPL-1.0-or-later
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: perl-namespace-clean-0.27-1.src.rpm
location_href: x86_64/perl-namespace-clean-0.27-1.x86_64.rpm
checksum_type: sha256
description:
  Keeping packages clean
  When you define a function, or import one, into a Perl package,
  it will naturally also be available as a method. This does not
  per se cause problems, but it can complicate subclassing and,
  for example, plugin classes that are included via multiple
  inheritance by loading them as base classes.

  The namespace::clean pragma will remove all previously declared
  or imported symbols at the end of the current package's compile cycle.
  Functions called in the package itself will still be bound by their name,
  but they won't show up as methods on your class or instances.

  By unimporting via no you can tell namespace::clean to start
  collecting functions for the next use namespace::clean; specification.

  You can use the -except flag to tell namespace::clean that you don't
  want it to remove a certain function or method. A common use would be
  a module exporting an import method along with some functions:


pkgId: 3f84eaaa87ae9a6ffbe8662e54b2c931b2bacc98593fa684501c34571a5db245
name: prelink
arch: x86_64
version: 20130503
epoch: 0
release: 0
summary: An ELF Prelinking Utility
url: http://people.redhat.com/jakub/prelink/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: prelink-20130503-0.src.rpm
location_href: x86_64/prelink-20130503-0.x86_64.rpm
checksum_type: sha256
description:
  The prelink program is a utility that modifies shared libraries and
  executables in the ELF format so that far less relocations need to be
  resolved at run time.  This decreases program start-up time.

  Be aware that prelink can modify all libraries and executables on your
  system. Applications which monitor changes in files or RPM itself
  will no longer work.


pkgId: ef31a77bc8d9ade4c7a5424c2fb64c6297fcccf8600e9e688525a6fffdacc7fd
name: privilege-verifier
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Verification Utility
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/privilege-verifier-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Verifier Utility provides functions to verify privilege information of packages to be installed.


pkgId: 82658a397786c0d96b6ac062161e643557a3d4aa96aa5cf0952036f51e0c33aa
name: protobuf
arch: x86_64
version: 33.1
epoch: 0
release: 1
summary: Protocol Buffers - Google's data interchange format
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: x86_64/protobuf-33.1-1.x86_64.rpm
checksum_type: sha256
description:
  Protocol Buffers are a way of encoding structured data in an efficient
  yet extensible format. Google uses Protocol Buffers for almost all of
  its internal RPC protocols and file formats.

  Protocol buffers are a flexible, efficient, automated mechanism for
  serializing structured data – think XML, but smaller, faster, and
  simpler. You define how you want your data to be structured once, then
  you can use special generated source code to easily write and read
  your structured data to and from a variety of data streams and using a
  variety of languages. You can even update your data structure without
  breaking deployed programs that are compiled against the "old" format.


pkgId: bc9738ce09bd54e7b46e1a923d272982977db376ff43393efe6e257d86c23db6
name: protobuf-lite
arch: x86_64
version: 33.1
epoch: 0
release: 1
summary: Protocol Buffers LITE_RUNTIME libraries
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: x86_64/protobuf-lite-33.1-1.x86_64.rpm
checksum_type: sha256
description:
  Protocol Buffers built with optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: a2f0f457747dbba6f38905add8995cce560604fa69dc6c42780310162b5797ab
name: protobuf-lite-devel
arch: x86_64
version: 33.1
epoch: 0
release: 1
summary: Protocol Buffers LITE_RUNTIME development libraries
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: x86_64/protobuf-lite-devel-33.1-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 0ac9f01e071cf426f5051f7a34843e6ee549e8582b730ff627181d5724be00da
name: protobuf-lite-static
arch: x86_64
version: 33.1
epoch: 0
release: 1
summary: Static development files for protobuf-lite
url: https://github.com/google/protobuf
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: protobuf-33.1-1.src.rpm
location_href: x86_64/protobuf-lite-static-33.1-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains static development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 65615452d708dd91629d92fb32dfc1d733fde9556a7bf3f1e0b6900e3c29e211
name: psmisc
arch: x86_64
version: 23.7
epoch: 0
release: 1
summary: Utilities for managing processes on your system
url: http://sourceforge.net/projects/psmisc/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: psmisc-23.7-1.src.rpm
location_href: x86_64/psmisc-23.7-1.x86_64.rpm
checksum_type: sha256
description:
  The psmisc package contains utilities for managing processes on your
  system: pstree, killall and fuser.  The pstree command displays a tree
  structure of all of the running processes on your system.  The killall
  command sends a specified signal (SIGTERM if nothing is specified) to
  processes identified by name.  The fuser command identifies the PIDs of
  processes that are using specified files or filesystems.


pkgId: e81768858ebd2ead00af086bae26406d3250b82cd7caafd56d536cf1eac5bff4
name: pulseaudio
arch: x86_64
version: 15.0
epoch: 0
release: 41
summary: Improved Linux sound server
url: http://pulseaudio.org
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Audio
rpm_sourcerpm: pulseaudio-15.0-41.src.rpm
location_href: x86_64/pulseaudio-15.0-41.x86_64.rpm
checksum_type: sha256
description:
  PulseAudio is a sound server for Linux and other Unix like operating
  systems. It is intended to be an improved drop-in replacement for the
  Enlightened Sound Daemon (ESOUND).


pkgId: 4ed1bc9afde17e5027255ef4eb4584b857971ded26ae68be9da957b659de22c6
name: pulseaudio-utils
arch: x86_64
version: 15.0
epoch: 0
release: 41
summary: Command line tools for the PulseAudio sound server
url: http://pulseaudio.org
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Audio
rpm_sourcerpm: pulseaudio-15.0-41.src.rpm
location_href: x86_64/pulseaudio-utils-15.0-41.x86_64.rpm
checksum_type: sha256
description:
  These tools provide command line access to various features of the
  PulseAudio sound server. Included tools are:
  pabrowse - Browse available PulseAudio servers on the local network.
  paplay - Playback a WAV file via a PulseAudio sink.
  pacat - Cat raw audio data to a PulseAudio sink.
  parec - Cat raw audio data from a PulseAudio source.
  pacmd - Connect to PulseAudio's built-in command line control interface.
  pactl - Send a control command to a PulseAudio server.
  padsp - /dev/dsp wrapper to transparently support OSS applications.
  pax11publish - Store/retrieve PulseAudio default server/sink/source
  settings in the X11 root window.


pkgId: d741ac39ec5418fc7a273345f3518705b68f4f32f4c534ef83bad81e4482cfdf
name: pygobject2
arch: x86_64
version: 3.55.0
epoch: 0
release: 1
summary: Python bindings for GObject
url: http://www.pygtk.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: pygobject2-3.55.0-1.src.rpm
location_href: x86_64/pygobject2-3.55.0-1.x86_64.rpm
checksum_type: sha256
description:
  The pygobject2 package provides a convenient wrapper for the GObject library
  for use in Python programs. This is version 3.55.0, an upgrade from the
  Tizen base version 3.46.0.


pkgId: defa703da50b43db8f6aea714d9cc9928f575fbf618af2b863f2a8bedb223750
name: pygobject2-devel
arch: x86_64
version: 3.55.0
epoch: 0
release: 1
summary: Development files for building add-on libraries
url: http://www.pygtk.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: pygobject2-3.55.0-1.src.rpm
location_href: x86_64/pygobject2-devel-3.55.0-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains files required to build wrappers for pygobject2-based
  libraries such as pygtk2.


pkgId: 7fd644901965d2239eab36a7645da54ed7877fc61b727bcdc56eab5c3b200754
name: python-Cheetah
arch: x86_64
version: 2.4.4
epoch: 0
release: 0
summary: Cheetah is a template engine and code generation tool
url: http://www.cheetahtemplate.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-Cheetah-2.4.4-0.src.rpm
location_href: x86_64/python-Cheetah-2.4.4-0.x86_64.rpm
checksum_type: sha256
description:
  Cheetah is an open source template engine and code generation tool.

  It can be used standalone or combined with other tools and frameworks. Web
  development is its principle use, but Cheetah is very flexible and is also being
  used to generate C++ game code, Java, sql, form emails and even Python code.


pkgId: 4512405bd33078fb68abe83b99f26102010085cfc91c089255387e950ba8b3e8
name: python-PyYAML
arch: x86_64
version: 3.10
epoch: 0
release: 0
summary: YAML parser and emitter for Python
url: http://pyyaml.org/wiki/PyYAML
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-PyYAML-3.10-0.src.rpm
location_href: x86_64/python-PyYAML-3.10-0.x86_64.rpm
checksum_type: sha256
description:
  YAML is a data serialization format designed for human readability
  and interaction with scripting languages.  PyYAML is a YAML parser
  and emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: 95c2761c6c99c29f1d6bf8480091820e9ea421eb78ab3bd51256d3cec0c19347
name: python-ZSI
arch: noarch
version: 2.1.a1
epoch: 0
release: 0
summary: Zolera SOAP Infrastructure
url: http://pywebsvcs.sf.net
rpm_license: Python
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-ZSI-2.1.a1-0.src.rpm
location_href: noarch/python-ZSI-2.1.a1-0.noarch.rpm
checksum_type: sha256
description:
  ZSI, the Zolera SOAP Infrastructure, is a pure-Python module that
  provides an implementation of SOAP messaging, as described in SOAP 1.1
  Specification (see http://www.w3.org/TR/soap).  It can also be used to
  build applications using SOAP Messages with Attachments (see
  http://www.w3.org/TR/SOAP-attachments).  ZSI is intended to make it
  easier to write web services in Python.

  In particular, ZSI parses and generates SOAP messages, and converts
  between native Python datatypes and SOAP syntax. Simple dispatch and
  invocation methods are supported.  There are no known bugs.  Its only
  known limitation is that it cannot handle multi-dimensional arrays.


pkgId: 5e2d3c4c04e57cf388732490be25cda2b4e29311d8280b97099fa8199a46b0fc
name: python-coverage
arch: x86_64
version: 3.6
epoch: 0
release: 0
summary: Code coverage measurement for Python
url: http://nedbatchelder.com/code/coverage
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-coverage-3.6-0.src.rpm
location_href: x86_64/python-coverage-3.6-0.x86_64.rpm
checksum_type: sha256
description:
  Coverage.py measures code coverage, typically during test execution. It uses
  the code analysis tools and tracing hooks provided in the Python standard
  library to determine which lines are executable, and which have been executed.


pkgId: ba58bae6d911567767269eb3e6da2de4eff5a0426a83bd55fb877a03aa221876
name: python-cython
arch: x86_64
version: 0.29.21
epoch: 0
release: 0
summary: The Cython compiler for writing C extensions for the Python language
url: http://www.cython.org
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-cython-0.29.21-0.src.rpm
location_href: x86_64/python-cython-0.29.21-0.x86_64.rpm
checksum_type: sha256
description:
  The Cython language makes writing C extensions for the Python language as
  easy as Python itself.  Cython is a source code translator based on the
  well-known Pyrex, but supports more cutting edge functionality and
  optimizations.

  The Cython language is very close to the Python language (and most Python
  code is also valid Cython code), but Cython additionally supports calling C
  functions and declaring C types on variables and class attributes. This
  allows the compiler to generate very efficient C code from Cython code.

  This makes Cython the ideal language for writing glue code for external C
  libraries, and for fast C modules that speed up the execution of Python
  code.


pkgId: 75f1393b5dbb7760b4d1b3d1ad5126daae3f9280b912f66e2e60423c1b822e9e
name: python-distribute
arch: noarch
version: 0.6.32
epoch: 0
release: 0
summary: Easily download, build, install, upgrade, and uninstall Python packages
url: http://packages.python.org/distribute
rpm_license: Python-2.0 or ZPL-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-distribute-0.6.32-0.src.rpm
location_href: noarch/python-distribute-0.6.32-0.noarch.rpm
checksum_type: sha256
description:
  Distribute is a fork of the Setuptools project.

  Distribute is intended to replace Setuptools as the standard method for working
  with Python module distributions.


pkgId: e37aa40dc7f0285a69bd7de9301e5fb7734bf9753808347a2b3b3567be18431d
name: python-gobject-cairo
arch: x86_64
version: 3.36.1
epoch: 0
release: 0
summary: Python bindings for GObject -- Cairo bindings
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-gobject-3.36.1-0.src.rpm
location_href: x86_64/python-gobject-cairo-3.36.1-0.x86_64.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python that gives you access to
  GLib's GObjects.

  This package contains the Python Cairo bindings for GObject.


pkgId: c40f5e98b27f727ac341d1f636ac714b3d68f393df9d05e21c7a9176a1f29042
name: python-gobject-pygtkcompat
arch: x86_64
version: 3.36.1
epoch: 0
release: 0
summary: Python bindings for GObject -- PyGTK Backwards Compatibility
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-gobject-3.36.1-0.src.rpm
location_href: x86_64/python-gobject-pygtkcompat-3.36.1-0.x86_64.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python that gives you access to
  GLib's GObjects.

  This package contains a module providing backwards compatibility to
  pygtk.


pkgId: 09941e86b2238e8b809ae3ea75d2ea8484d5ddbaf365a05bef1369191b698466
name: python-gpgme
arch: x86_64
version: 0.1
epoch: 0
release: 0
summary: A Python module for working with OpenPGP messages
url: http://pypi.python.org/pypi/pygpgme
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-gpgme-0.1-0.src.rpm
location_href: x86_64/python-gpgme-0.1-0.x86_64.rpm
checksum_type: sha256
description:
  PyGPGME is a Python module that lets you sign, verify, encrypt and
  decrypt messages using the OpenPGP format.

  It is built on top of the GNU Privacy Guard and the GPGME library.


pkgId: 608a6e77dfe7ae6bd5baaa4862ace6cff316ca888bbe9eb64ba831b32987f23a
name: python-iniparse
arch: noarch
version: 0.4
epoch: 0
release: 0
summary: Python Module for Accessing and Modifying Configuration Data in INI files
url: http://code.google.com/p/iniparse/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-iniparse-0.4-0.src.rpm
location_href: noarch/python-iniparse-0.4-0.noarch.rpm
checksum_type: sha256
description:
  iniparse is an INI parser for Python which is API compatible with the
  standard library's ConfigParser, preserves structure of INI files
  (order of sections & options, indentation, comments, and blank lines
  are preserved when data is updated), and is more convenient to use.


pkgId: 20ebb093e3ec27e907841e0cc89b3b992b4c9a01e45e24935dde4773474f6ba7
name: python-numpy
arch: x86_64
version: 1.16.6
epoch: 0
release: 0
summary: NumPy array processing for numbers, strings, records and objects
url: http://www.numpy.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/Python
rpm_sourcerpm: python-numpy-1.16.6-0.src.rpm
location_href: x86_64/python-numpy-1.16.6-0.x86_64.rpm
checksum_type: sha256
description:
  NumPy is a general-purpose array-processing package designed to
  efficiently manipulate large multi-dimensional arrays of arbitrary
  records without sacrificing too much speed for small multi-dimensional
  arrays.  NumPy is built on the Numeric code base and adds features
  introduced by numarray as well as an extended C-API and the ability to
  create arrays of arbitrary type which also makes NumPy suitable for
  interfacing with general-purpose data-base applications.

  There are also basic facilities for discrete fourier transform,
  basic linear algebra and random number generation.


pkgId: ca272723d92a4e2998943997e75f5365d39c3a22f892857b7c8ea110830016e7
name: python-pyOpenSSL
arch: noarch
version: 19.0.0.0
epoch: 0
release: 0
summary: Python wrapper module around the OpenSSL library
url: https://github.com/pyca/pyopenssl
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-pyOpenSSL-19.0.0.0-0.src.rpm
location_href: noarch/python-pyOpenSSL-19.0.0.0-0.noarch.rpm
checksum_type: sha256
description:
  High-level wrapper around a subset of the OpenSSL library, includes
   * SSL.Connection objects, wrapping the methods of Python's portable
     sockets
   * Callbacks written in Python
   * Extensive error-handling mechanism, mirroring OpenSSL's error codes
  ...  and much more ;)


pkgId: 5c9b2d4a5539a9ac5f8cde9f0c3875ed9a323abd27a8410624d3d238747ab40e
name: python-pycrypto
arch: x86_64
version: 2.6.1
epoch: 0
release: 0
summary: Cryptographic modules for Python
url: http://www.pycrypto.org/
rpm_license: Public Domain
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-pycrypto-2.6.1-0.src.rpm
location_href: x86_64/python-pycrypto-2.6.1-0.x86_64.rpm
checksum_type: sha256
description:
  The package contains:

    * Hash functions: MD2, MD4, RIPEMD, SHA256.
    * Block encryption algorithms: AES, ARC2, Blowfish, CAST, DES,
      Triple-DES, IDEA, RC5.
    * Stream encryption algorithms: ARC4, simple XOR.
    * Public-key algorithms: RSA, DSA, ElGamal, qNEW.
    * Protocols: All-or-nothing transforms, chaffing/winnowing.
    * Miscellaneous: RFC1751 module for converting 128-key keys into a
      set of English words, primality testing.
    * Some demo programs (currently all quite old and outdated).


pkgId: f9cc0eddaf77ca0b97a26c0f82cbc41a8ebaed4d68ff8b49162c4166722edd0e
name: python-pycurl
arch: x86_64
version: 7.19.0
epoch: 0
release: 0
summary: A Python interface to libcurl
url: http://pycurl.sourceforge.net/
rpm_license: LGPL-2.1+ or MIT/X11
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-pycurl-7.19.0-0.src.rpm
location_href: x86_64/python-pycurl-7.19.0-0.x86_64.rpm
checksum_type: sha256
description:
  PycURL is a Python interface to libcurl. PycURL can be used to fetch
  objects identified by a URL from a Python program, similar to the
  urllib Python module. PycURL is mature, very fast, and supports a lot
  of features.


pkgId: ba9d16004aded03293c75fa4410e9c396c8f1e67b8d3097fee2f7d67648d1e38
name: python-sqlite
arch: x86_64
version: 2.6.3
epoch: 0
release: 0
summary: DB-API 2.0 interface for SQLite 3.x
url: http://pysqlite.googlecode.com/
rpm_license: Zlib
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python-sqlite-2.6.3-0.src.rpm
location_href: x86_64/python-sqlite-2.6.3-0.x86_64.rpm
checksum_type: sha256
description:
  Python interface to SQLite 3

  pysqlite is an interface to the SQLite 3.x embedded relational database engine.
  It is almost fully compliant with the Python database API version 2.0 also
  exposes the unique features of SQLite.


pkgId: 78a66433d512db225f26fb8bd997117030b77b4a21d7aae66e4b8e79b0ac7a45
name: python-urlgrabber
arch: noarch
version: 3.9.1
epoch: 0
release: 0
summary: A high-level cross-protocol url-grabber
url: http://urlgrabber.baseurl.org/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python-urlgrabber-3.9.1-0.src.rpm
location_href: noarch/python-urlgrabber-3.9.1-0.noarch.rpm
checksum_type: sha256
description:
  A high-level cross-protocol url-grabber for python supporting HTTP, FTP
  and file locations.  Features include keepalive, byte ranges, throttling,
  authentication, proxies and more.


pkgId: db628bfa2ca4be5ea1af02302f82330d60ceadd37245ca0806335e8f8007cd7f
name: python3-Cheetah
arch: x86_64
version: 3.4.0.post5
epoch: 0
release: 0
summary: Cheetah is a template engine and code generation tool
url: http://www.cheetahtemplate.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python3
rpm_sourcerpm: python3-Cheetah-3.4.0.post5-0.src.rpm
location_href: x86_64/python3-Cheetah-3.4.0.post5-0.x86_64.rpm
checksum_type: sha256
description:
  Cheetah is an open source template engine and code generation tool.

  It can be used standalone or combined with other tools and frameworks. Web
  development is its principle use, but Cheetah is very flexible and is also being
  used to generate C++ game code, Java, sql, form emails and even Python3 code.


pkgId: 8ade3aa506c48d3abce4942ec665ce31bd1757d50bf19cbc33bf8d900e0e17af
name: python3-PyYAML
arch: x86_64
version: 3.10
epoch: 0
release: 0
summary: YAML parser and emitter for Python3
url: http://pyyaml.org/wiki/PyYAML
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python-PyYAML-3.10-0.src.rpm
location_href: x86_64/python3-PyYAML-3.10-0.x86_64.rpm
checksum_type: sha256
description:
  PyYAML for Python3

  YAML is a data serialization format designed for human readability
  and interaction with scripting languages.  PyYAML is a YAML parser
  and emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistance.


pkgId: 6290d14ba3eb549f148283a6b1ee6fb3b18a712cddcddc4911647a2afd16bd69
name: python3-asn1crypto
arch: x86_64
version: 1.5.1
epoch: 0
release: 0
summary: python3-asn1crypto
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Testing
rpm_sourcerpm: python3-asn1crypto-1.5.1-0.src.rpm
location_href: x86_64/python3-asn1crypto-1.5.1-0.x86_64.rpm
checksum_type: sha256
description:
  ASN.1 parser and serializer with definitions for private keys, public keys,
  certificates, CRL, OCSP, CMS, PKCS#3, PKCS#7, PKCS#8, PKCS#12, PKCS#5, X509 and TSP


pkgId: 787c99ac34c3aec9f2c980440071c3483edc3cdd4cfead61332aca2b6505c913
name: python3-atomicwrites
arch: x86_64
version: 1.4.1
epoch: 0
release: 0
summary: Atomic file writes for Python
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-atomicwrites-1.4.1-0.src.rpm
location_href: x86_64/python3-atomicwrites-1.4.1-0.x86_64.rpm
checksum_type: sha256
description:
  Atomic file writes for python3.
  Features that distinguish it from other similar libraries:

  - Race-free assertion that the target file doesn't yet exist. This can be
    controlled with the 'overwrite' parameter.

  - High-level API that wraps a very flexible class-based API


pkgId: becb8f54134c711d5f7f2e2c9d8c55d328f30cb930cbba00a5d9da2e05da50c7
name: python3-catkin-pkg
arch: noarch
version: 1.1.0
epoch: 0
release: 1
summary: catkin package library
rpm_license: BSD
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-catkin-pkg-1.1.0-1.src.rpm
location_href: noarch/python3-catkin-pkg-1.1.0-1.noarch.rpm
checksum_type: sha256
description:
  The pytest framework makes it easy to write small tests, yet scales to support complex functional testing for applications and libraries.


pkgId: ad6af484dedc221e29f98326b893547dcf324ec9c1717a6f6613766336492400
name: python3-cffi
arch: x86_64
version: 2.0.0
epoch: 0
release: 0
summary: Foreign Function Interface for Python calling C code
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-cffi-2.0.0-0.src.rpm
location_href: x86_64/python3-cffi-2.0.0-0.x86_64.rpm
checksum_type: sha256
description:
  Foreign Function Interface for Python calling C code. The aim of this project
  is to provide a convenient and reliable way of calling C code from Python.


pkgId: 7bc38c1f1600632625de197ffcd54a15fc3fb8af41509d742d913422a83df68a
name: python3-cryptography
arch: x86_64
version: 2.3
epoch: 0
release: 0
summary: PyCA's cryptography library
rpm_license: Apache-2.0 or BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-cryptography-2.3-0.src.rpm
location_href: x86_64/python3-cryptography-2.3-0.x86_64.rpm
checksum_type: sha256
description:
  cryptography is a package designed to expose cryptographic primitives and
  recipes to Python developers.


pkgId: 753fe9574815b38b432276fc3fc9cc81e461437dc5cfafd677337411bc49a2d5
name: python3-distlib
arch: noarch
version: 0.4.0
epoch: 0
release: 1
summary: packaging and distribution of Python software
rpm_license: Python-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-distlib-0.4.0-1.src.rpm
location_href: noarch/python3-distlib-0.4.0-1.noarch.rpm
checksum_type: sha256
description:
  Distlib is a library which implements low-level functions that relate to packaging and distribution of Python software.


pkgId: 2ad15b0cb577abad8ee32ae1c5fc5a7e232bd0d4d7ebd77f61af3b3d87fe2165
name: python3-empy
arch: noarch
version: 4.2
epoch: 0
release: 0
summary: A powerful and robust template system for Python
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages
rpm_sourcerpm: python3-empy-4.2-0.src.rpm
location_href: noarch/python3-empy-4.2-0.noarch.rpm
checksum_type: sha256
description:
  EmPy is a system for embedding Python expressions and statements in template
  text; it takes an EmPy source file, processes it, and produces output.


pkgId: f76841e9cb1306d112dc1b765f1c4cbb306a588f450ffae45542639a84628db5
name: python3-gobject-cairo
arch: x86_64
version: 3.46.0
epoch: 0
release: 0
summary: Python3 bindings for GObject -- Cairo bindings
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-gobject-3.46.0-0.src.rpm
location_href: x86_64/python3-gobject-cairo-3.46.0-0.x86_64.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python3 that gives you access to
  GLib's GObjects.

  This package contains the Python3 Cairo bindings for GObject.


pkgId: 680eca27ea5f48a6a11aa7a6ede2536039e87d5b82b179e44fac7a45f6839d4e
name: python3-gobject-pygtkcompat
arch: x86_64
version: 3.46.0
epoch: 0
release: 0
summary: Python3 bindings for GObject -- PyGTK Backwards Compatibility
url: http://ftp.gnome.org/pub/GNOME/sources/pygobject/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-gobject-3.46.0-0.src.rpm
location_href: x86_64/python3-gobject-pygtkcompat-3.46.0-0.x86_64.rpm
checksum_type: sha256
description:
  Pygobjects is an extension module for python3 that gives you access to
  GLib's GObjects.

  This package contains a module providing backwards compatibility to
  pygtk.


pkgId: d425890e85990df8697bb13fa21604000c60fe46a8e8a58d36a325b2757349d1
name: python3-grpcio
arch: x86_64
version: 1.76.0
epoch: 0
release: 0
summary: HTTP/2-based Remote Procedure Call implementation
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-grpcio-1.76.0-0.src.rpm
location_href: x86_64/python3-grpcio-1.76.0-0.x86_64.rpm
checksum_type: sha256
description:
  gRPC is a remote procedure call (RPC) framework. gRPC enables client
  and server applications to communicate, and enables the building of
  connected systems.


pkgId: e51fc42cc187c83deffb2a71c92e232a1db41bdf79a13842d2612aa612141047
name: python3-hatch-fancy-pypi-readme
arch: x86_64
version: 25.1.0
epoch: 0
release: 1
summary: Hatch plugin for writing fancy PyPI readmes
url: https://github.com/hynek/hatch-fancy-pypi-readme
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-hatch-fancy-pypi-readme-25.1.0-1.src.rpm
location_href: x86_64/python3-hatch-fancy-pypi-readme-25.1.0-1.x86_64.rpm
checksum_type: sha256
description:
  This provides a Hatch metadata plugin for everyone who cares about the
  first impression of their projectâ€™s PyPI landing page. It allows you to
  define your PyPI project description in terms of concatenated fragments
  that are based on static strings, files, and most importantly: parts of
  files defined using cut-off points or regular expressions.


pkgId: 14aac9f86652fdc7dd0db9c1efc027ea6f38e12b5e97d76135eea7822c5949ef
name: python3-hatch-vcs
arch: x86_64
version: 0.5.0
epoch: 0
release: 1
summary: Hatch plugin for versioning with your preferred VCS
url: https://github.com/ofek/hatch-vcs
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-hatch-vcs-0.5.0-1.src.rpm
location_href: x86_64/python3-hatch-vcs-0.5.0-1.x86_64.rpm
checksum_type: sha256
description:
  This provides a plugin for Hatch that uses your preferred version control
  system (like Git) to determine project versions.


pkgId: 67ee7d0f50a63d0a4ee8c41ca13917b1319c20355b344b5dfdfb7b4ad9203866
name: python3-idna
arch: noarch
version: 3.11
epoch: 0
release: 0
summary: Internationalized Domain Names in Applications (IDNA)
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-idna-3.11-0.src.rpm
location_href: noarch/python3-idna-3.11-0.noarch.rpm
checksum_type: sha256
description:
  A library to support the Internationalised Domain Names in
  Applications (IDNA) protocol as specified in RFC 5891
  http://tools.ietf.org/html/rfc5891. This version of the protocol
  is often referred to as \A1\B0IDNA2008\A1\B1 and can produce different
  results from the earlier standard from 2003.

  The library is also intended to act as a suitable drop-in replacement
  for the \A1\B0encodings.idna\A1\B1 module that comes with the Python standard
  library but currently only supports the older 2003 specification.


pkgId: 99ee1113f9bd106a7a70c1ee66663c58db30fb690191a612e389b94871ef2aaa
name: python3-iso8601
arch: noarch
version: 2.1.0
epoch: 0
release: 0
summary: Simple module to parse ISO 8601 dates
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-iso8601-2.1.0-0.src.rpm
location_href: noarch/python3-iso8601-2.1.0-0.noarch.rpm
checksum_type: sha256
description:
  Simple module to parse ISO 8601 dates

  This module parses the most common forms of ISO 8601 date strings (e.g.
  2007-01-14T20:34:22+00:00) into datetime objects.


pkgId: cdebf90234c0649a0e095168a10fe118bf63958e32f95f85f24a955a989b8655
name: python3-jinja2
arch: noarch
version: 3.1.3
epoch: 0
release: 1
summary: A syntax highlighting engine written in Python3
url: https://jinja.palletsprojects.com/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-jinja2-3.1.3-1.src.rpm
location_href: noarch/python3-jinja2-3.1.3-1.noarch.rpm
checksum_type: sha256
description:
  Jinja is a fast, expressive, extensible templating engine. Special
  placeholders in the template allow writing code similar to Python
  syntax. Then the template is passed data to render the final document.


pkgId: 4fe1b2cd9decbf1d8a2e825c1a493e5f78a3734c4bffd5169a2b3c090f9786bc
name: python3-meson-python
arch: noarch
version: 0.18.0
epoch: 0
release: 0
summary: Meson Python build backend (PEP 517)
url: https://github.com/mesonbuild/meson-python
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-meson-python-0.18.0-0.src.rpm
location_href: noarch/python3-meson-python-0.18.0-0.noarch.rpm
checksum_type: sha256
description:
  meson-python is a Python build backend built on top of the Meson build system.
  It enables to use Meson for the configuration and build steps of Python
  packages. Meson is an open source build system meant to be both extremely fast,
  and, even more importantly, as user friendly as possible. meson-python is best
  suited for building Python packages containing extension modules implemented in
  languages such as C, C++, Cython, Fortran, Pythran, or Rust. Consult the
  documentation for more details.


pkgId: 20d1c0cd10cfc828c4e0d552637acfac88d41f679a1ed460e8f2e2feebaad101
name: python3-more-itertools
arch: noarch
version: 10.8.0
epoch: 0
release: 0
summary: More routines for operating on iterables, beyond itertools
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-more-itertools-10.8.0-0.src.rpm
location_href: noarch/python3-more-itertools-10.8.0-0.noarch.rpm
checksum_type: sha256
description:
  I love itertools; it's one of the most beautiful, composable standard libs.
  Whenever I have an iteration problem, there's almost always an itertools
  routine that fits it perfectly. Sometimes, however, neither itertools nor the
  recipes included in its docs do quite what I need.

  Here I've collected several routines I've reached for but not found. Since
  they are deceptively tricky to get right, I've wrapped them up into a library.
  We've also included implementations of the recipes from the itertools
  documentation. Enjoy! Any additions are welcome; just file a pull request.


pkgId: cc435c4a317b6666f64916e9fcb0340788dc0af221659ea024144ce163f532e4
name: python3-netifaces
arch: x86_64
version: 0.11.0
epoch: 0
release: 0
summary: Portable network interface information
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-netifaces-0.11.0-0.src.rpm
location_href: x86_64/python3-netifaces-0.11.0-0.x86_64.rpm
checksum_type: sha256
description:
  netifaces provides a (hopefully portable-ish) way for Python programmers to
  get access to a list of the network interfaces on the local machine, and to
  obtain the addresses of those network interfaces.

  The package has been tested on Mac OS X, Windows XP, Windows Vista, Linux and
  Solaris. On Windows, it is currently not able to retrieve IPv6 addresses,
  owing to shortcomings of the Windows API.

  It should work on other UNIX-like systems provided they implement either
  getifaddrs() or support the SIOCGIFxxx socket options, although the data
  provided by the socket options is normally less complete.


pkgId: 1f178e33105db6ab6487840d75793a942030a9abe38eab507dc83129f6a8a5eb
name: python3-opencv
arch: x86_64
version: 4.7.0
epoch: 0
release: 8
summary: OpenCV Python3 Library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: opencv-4.7.0-8.src.rpm
location_href: x86_64/python3-opencv-4.7.0-8.x86_64.rpm
checksum_type: sha256
description:
  The Open Computer Vision Library (Python3) includes various algorithms for computre vision problems.


pkgId: e2d1285c26b17239863852d1d8bafa20ca807c55e2682c92a380be6af2a2b4a6
name: python3-pathlib2
arch: x86_64
version: 2.3.7.post1
epoch: 0
release: 0
summary: Object-oriented filesystem paths
rpm_license: MIT
rpm_vendor: tizen
rpm_group: devel/python
rpm_sourcerpm: python3-pathlib2-2.3.7.post1-0.src.rpm
location_href: x86_64/python3-pathlib2-2.3.7.post1-0.x86_64.rpm
checksum_type: sha256
description:
  pathlib2 offers a set of classes to handle filesystem paths in an
  object-oriented fashion. This is a backport of the Python 3.4+ pathlib
  module for older Python versions.


pkgId: 93abfee1a610dc9d59dc9f140c5ca40c0006fe189140e75249ec6fa781b28232
name: python3-pycparser
arch: x86_64
version: 2.23
epoch: 0
release: 0
summary: C parser in Python
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-pycparser-2.23-0.src.rpm
location_href: x86_64/python3-pycparser-2.23-0.x86_64.rpm
checksum_type: sha256
description:
  pycparser is a complete parser of the C language, written in pure Python using
  the PLY parsing library. It parses C code into an AST and can serve as a
  front-end for C compilers or analysis tools.


pkgId: c1adf77eb3b21701f8781a941833d5a513d8410466827da994d7c0c7d387f5c7
name: python3-pyproject-metadata
arch: noarch
version: 0.10.0
epoch: 0
release: 0
summary: PEP 621 metadata parsing
url: https://github.com/FFY00/python-pyproject-metadata
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: python3-pyproject-metadata-0.10.0-0.src.rpm
location_href: noarch/python3-pyproject-metadata-0.10.0-0.noarch.rpm
checksum_type: sha256
description:
  Dataclass for PEP 621 metadata with support for core metadata generation.

  This project does not implement the parsing of pyproject.toml containing PEP
  621 metadata.  Instead, given a Python data structure representing PEP 621
  metadata (already parsed), it will validate this input and generate a PEP
  643-compliant metadata file (e.g. PKG-INFO).


pkgId: 78b791e3d99d17838ae359de352bd439464fe936f5c1602a82632a7d99637cf0
name: python3-pytest-repeat
arch: noarch
version: 0.9.4
epoch: 0
release: 1
summary: pytest-repeat is a plugin for pytest
rpm_license: MPL-2.0
rpm_vendor: tizen
rpm_group: Development/Languages/Python
rpm_sourcerpm: python3-pytest-repeat-0.9.4-1.src.rpm
location_href: noarch/python3-pytest-repeat-0.9.4-1.noarch.rpm
checksum_type: sha256
description:
  pytest-repeat is a plugin for pytest that makes it easy to repeat a single test, or multiple tests, a specific number of times.


pkgId: 8657377bb3ce52fec5a3776f6ad346192a5d1078eb03307e63985dd65ee24530
name: python3-pytz
arch: x86_64
version: 2025.2
epoch: 0
release: 0
summary: World timezone definitions, modern and historical
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: python3-pytz-2025.2-0.src.rpm
location_href: x86_64/python3-pytz-2025.2-0.x86_64.rpm
checksum_type: sha256
description:
  python-tz brings the Olson tz database into Python.
  This library allows accurate and cross platform timezone calculations
  using Python 2.3 or higher. It also solves the issue of ambiguous times
  at the end of daylight savings, which you can read more about in
  the Python Library Reference (datetime.tzinfo).


pkgId: 3ec5ca413f12484a147a3e5fa0971a4cffb46e8a9f4c646689e181ae025a7c7d
name: python3-sqlite
arch: x86_64
version: 0.5.4
epoch: 0
release: 0
summary: DB-API 2.0 interface for SQLite 3.x
url: https://github.com/coleifer/pysqlite3
rpm_license: Zlib
rpm_vendor: tizen
rpm_group: Platform Development/Python
rpm_sourcerpm: python3-sqlite-0.5.4-0.src.rpm
location_href: x86_64/python3-sqlite-0.5.4-0.x86_64.rpm
checksum_type: sha256
description:
  Python3 interface to SQLite 3
  pysqlite is an interface to the SQLite 3.x embedded relational database engine.
  It is almost fully compliant with the Python3 database API version 2.0 also
  exposes the unique features of SQLite.


pkgId: 028b5345587a5e153e4a035b401287f4d372d4c3fcfe4d46c86d1a1a4992bd11
name: re2c
arch: x86_64
version: 4.3
epoch: 0
release: 1
summary: Tool for generating C-based recognizers from regular expressions
url: https://re2c.org/
rpm_license: PD
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: re2c-4.3-1.src.rpm
location_href: x86_64/re2c-4.3-1.x86_64.rpm
checksum_type: sha256
description:
  re2c is a tool for writing fast and flexible lexers. Unlike other such
  tools, it concentrates solely on generating efficient code for matching
  regular expressions. This makes it suitable for a wide variety of
  applications. The generated scanners approach hand-crafted ones in
  terms of size and speed.


pkgId: 52014b19b4412a99f19d79a908c1a0bf552f2be16f5a9627e795fb1c15dc993c
name: rnnoise
arch: x86_64
version: 0
epoch: 0
release: 0.4
summary: Recurrent neural network for audio noise reduction
url: https://gitlab.xiph.org/xiph/rnnoise
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rnnoise-0-0.4.src.rpm
location_href: x86_64/rnnoise-0-0.4.x86_64.rpm
checksum_type: sha256
description:
  RNNoise is a noise suppression library based on a recurrent neural network.

  While it is meant to be used as a library, a simple command-line tool is
  provided as an example. It operates on RAW 16-bit (machine endian) mono PCM
  files sampled at 48 kHz. It can be used as:

  ./examples/rnnoise_demo <noisy speech> <output denoised>

  The output is also a 16-bit raw PCM file.


pkgId: 9f841fb65f2566a02cdc9791c1bec25880e748a6b501a263a2de0f7997b31b5c
name: rsync
arch: x86_64
version: 3.4.1
epoch: 0
release: 1
summary: A program for synchronizing files over a network
url: http://rsync.samba.org/
rpm_license: GPL-3.0-or-later
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: rsync-3.4.1-1.src.rpm
location_href: x86_64/rsync-3.4.1-1.x86_64.rpm
checksum_type: sha256
description:
  Rsync uses a reliable algorithm to bring remote and host files into
  sync very quickly. Rsync is fast because it just sends the differences
  in the files over the network instead of sending the complete
  files. Rsync is often used as a very powerful mirroring process or
  just as a more capable replacement for the rcp command. A technical
  report which describes the rsync algorithm is included in this
  package.


pkgId: 2271c32e9e81f20735bdf2cc995e4d933d72a64a3b777084a9f7135851e61fe3
name: rust
arch: x86_64
version: 1.90.0
epoch: 0
release: 1
summary: The Rust Programming Language
url: https://www.rust-lang.org
rpm_license: Apache-2.0 or MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-1.90.0-1.src.rpm
location_href: x86_64/rust-1.90.0-1.x86_64.rpm
checksum_type: sha256
description:
  Rust is a systems programming language that runs blazingly fast, prevents
  segfaults, and guarantees thread safety.

  This package includes the Rust compiler and documentation generator.


pkgId: 7df0216f0c35d5a29535408d6a17700503e70a9d0f16138a61ac391b6e6c6f67
name: rust-cfg-if
arch: x86_64
version: 1.0.0
epoch: 0
release: 1
summary: Macro to ergonomically define an item depending on a large number of #[cfg] parameters
url: https://crates.io/crates/cfg-if
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-cfg-if-1.0.0-1.src.rpm
location_href: x86_64/rust-cfg-if-1.0.0-1.x86_64.rpm
checksum_type: sha256
description:
  Macro to ergonomically define an item depending on a large number of #[cfg]
  parameters. Structured like an if-else chain, the first matching branch is the
  item that gets emitted.


pkgId: 4d5a7b0c6569e0a3338a0389bb5790d9d01b197361fe2333ea750f065bc0eb19
name: rust-litrs
arch: x86_64
version: 0.4.0
epoch: 0
release: 1
summary: Parse and inspect Rust literals (i.e
url: https://crates.io/crates/litrs
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-litrs-0.4.0-1.src.rpm
location_href: x86_64/rust-litrs-0.4.0-1.x86_64.rpm
checksum_type: sha256
description:
  Parse and inspect Rust literals (i.e. tokens in the Rust programming language
  representing fixed values). Particularly useful for proc macros, but can also
  be used outside of a proc-macro context.


pkgId: a0a480de24e1da82cb92a1db6c246df40dd233b0f68bfd40d6b27467988e8ed5
name: rust-normalize-line-endings
arch: x86_64
version: 0.3.0
epoch: 0
release: 1
url: https://crates.io/crates/normalize-line-endings
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-normalize-line-endings-0.3.0-1.src.rpm
location_href: x86_64/rust-normalize-line-endings-0.3.0-1.x86_64.rpm
checksum_type: sha256
summary:
  Takes an iterator over chars and returns a new iterator with all line endings (\r, \n, or \r\n) as \n

description:
  Takes an iterator over chars and returns a new iterator with all line endings
  (\r, \n, or \r\n) as \n.


pkgId: 8ff4fe37823e19def01fa318feb04ebeee42f8bda9fd1d31939f294e8dcdb49d
name: rust-proc-macro2
arch: x86_64
version: 1.0.51
epoch: 0
release: 1
url: https://crates.io/crates/proc-macro2
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-proc-macro2-1.0.51-1.src.rpm
location_href: x86_64/rust-proc-macro2-1.0.51-1.x86_64.rpm
checksum_type: sha256
summary:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-based libraries from the procedural macro use case

description:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-
  based libraries from the procedural macro use case.


pkgId: ac33f6c0091ac5f3a45cccdf7c2657c12c97821cc1c09296a97f5e48b84fdc31
name: rust-regex
arch: x86_64
version: 1.7.1
epoch: 0
release: 1
summary: Implementation of regular expressions for Rust
url: https://crates.io/crates/regex
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-regex-1.7.1-1.src.rpm
location_href: x86_64/rust-regex-1.7.1-1.x86_64.rpm
checksum_type: sha256
description:
  Implementation of regular expressions for Rust. This implementation uses finite
  automata and guarantees linear time matching on all inputs.


pkgId: e34b8b094739014cdfad2a8071d2d4bdd50aba100d55cd78bbc0d971869594f0
name: rust-scopeguard
arch: x86_64
version: 1.1.0
epoch: 0
release: 1
url: https://crates.io/crates/scopeguard
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-scopeguard-1.1.0-1.src.rpm
location_href: x86_64/rust-scopeguard-1.1.0-1.x86_64.rpm
checksum_type: sha256
summary:
  RAII scope guard that will run a given closure when it goes out of scope, even if the code between panics (assuming unwinding panic)

description:
  RAII scope guard that will run a given closure when it goes out of scope, even
  if the code between panics (assuming unwinding panic).
  Defines the macros `defer!`, `defer_on_unwind!`, `defer_on_success!` as
  shorthands for guards with one of the implemented strategies.


pkgId: 18455923e855c21e0177185ec893178f49c630684d2da734ba4a715dc11b11a0
name: rust-serde_spanned
arch: x86_64
version: 0.6.1
epoch: 0
release: 1
summary: Native Rust encoder and decoder of TOML-formatted files and streams
url: https://crates.io/crates/serde_spanned
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-serde_spanned-0.6.1-1.src.rpm
location_href: x86_64/rust-serde_spanned-0.6.1-1.x86_64.rpm
checksum_type: sha256
description:
  Native Rust encoder and decoder of TOML-formatted files and streams. Provides
  implementations of the standard Serialize/Deserialize traits for TOML data to
  facilitate deserializing and serializing Rust structures.


pkgId: 3400741f6806b061cd3552fa46f74ba5145db5a8c4896b1251198a9bf4cc7518
name: rust-stable_deref_trait
arch: x86_64
version: 1.2.0
epoch: 0
release: 1
url: https://crates.io/crates/stable_deref_trait
rpm_license: MIT OR Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-stable_deref_trait-1.2.0-1.src.rpm
location_href: x86_64/rust-stable_deref_trait-1.2.0-1.x86_64.rpm
checksum_type: sha256
summary:
  Unsafe marker trait for types like Box and Rc that dereference to a stable address even when moved, and hence can be used with libraries such as owning_ref and rental

description:
  Unsafe marker trait for types like Box and Rc that dereference to a stable
  address even when moved, and hence can be used with libraries such as
  owning_ref and rental.


pkgId: 4bf80bf885c11ae2ac881476e741c73aca69327e8d70b745fc6ad995723c5f68
name: rust-unicode-ident
arch: x86_64
version: 1.0.6
epoch: 0
release: 1
url: https://crates.io/crates/unicode-ident
rpm_license: (MIT OR Apache-2.0) AND Unicode-DFS-2016
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-unicode-ident-1.0.6-1.src.rpm
location_href: x86_64/rust-unicode-ident-1.0.6-1.x86_64.rpm
checksum_type: sha256
summary:
  Determine whether characters have the XID_Start or XID_Continue properties according to Unicode Standard Annex #31

description:
  Determine whether characters have the XID_Start or XID_Continue properties
  according to Unicode Standard Annex #31.


pkgId: 689797503c6488a30d2e31455b2e7da99a7c4d486f23efbc5fd340713028a18d
name: rust-version-compare
arch: x86_64
version: 0.1.1
epoch: 0
release: 1
url: https://crates.io/crates/version-compare
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: rust-version-compare-0.1.1-1.src.rpm
location_href: x86_64/rust-version-compare-0.1.1-1.x86_64.rpm
checksum_type: sha256
summary:
  Rust library to easily compare version numbers with no specific format, and test against various comparison operators

description:
  Rust library to easily compare version numbers with no specific format, and
  test against various comparison operators.


pkgId: 61449c1999688be614fd83eebfc4086d809b9ba94f51b23311cf61de4df55616
name: scons
arch: x86_64
version: 4.4.0
epoch: 0
release: 0
summary: Replacement for Make
url: http://www.scons.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Tools/Building
rpm_sourcerpm: scons-4.4.0-0.src.rpm
location_href: x86_64/scons-4.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  SCons is a make replacement that provides a range of enhanced features,
  such as automated dependency generation and built-in compilation cache
  support. SCons rule sets are Python scripts, which means that SCons
  provides itself as well as the features. SCons allows you to use the
  full power of Python to control compilation.


pkgId: 8317003351748aafa0c8863470ba89a58eb58c4826dce1e87142efe2097b0a26
name: sdbd-profile_tv
arch: x86_64
version: 3.0.50
epoch: 0
release: 0
summary: SDB daemon extension for TV
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sdbd-3.0.50-0.src.rpm
location_href: x86_64/sdbd-profile_tv-3.0.50-0.x86_64.rpm
checksum_type: sha256
description:
  SDB daemon extension for TV.
  This changes the service unit files of the default SDB daemon service files.


pkgId: 097b7992be5f95f2775ce00f9a199093f5afdcceb401f37c2a9183d1634871f2
name: security-privilege-manager
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.


pkgId: aee097d5ac40d04e44027ab90e65954f977c1bc6cf603ec5fdda8c24be1e9b55
name: security-privilege-manager-extension-iot
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen IoT profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-extension-iot-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen IoT profile,
  which requires security-profile-manger to be installed before this.


pkgId: 76a7666cdcb287ca51bd4cfcdd5231183ac1a1b8be1c9aabce7e0c2bc7798ac0
name: security-privilege-manager-extension-mobile
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen Mobile profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-extension-mobile-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen Mobile profile,
  which requires security-profile-manger to be installed before this.


pkgId: 50d87c61490aa70197f2b48c2b93af8e47f296e04b0adb6f6b1876cc416d3979
name: security-privilege-manager-extension-tv
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen TV profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-extension-tv-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen TV profile,
  which requires security-profile-manger to be installed before this.


pkgId: 6ca066f07bd919628182601885ce534e9f9dd9360bd60b23c0ab883d93d4b05a
name: security-privilege-manager-extension-wearable
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Privilege Manager API extension for Tizen Wearable profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: privilege-checker-1.4.0-0.src.rpm
location_href: x86_64/security-privilege-manager-extension-wearable-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  The Privilege Manager API provides functions to verify privilege information of packages to be installed.
  This is an extension for privilege manager for Tizen Wearable profile,
  which requires security-profile-manger to be installed before this.


pkgId: be3aa3b38e54a8e57ab0a11c8f1d3eef69032c6286c3faeccdb1bcbfb544cada
name: sensord
arch: x86_64
version: 10.0.0
epoch: 0
release: 1
summary: Sensor daemon
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Sensor Framework
rpm_sourcerpm: sensord-10.0.0-1.src.rpm
location_href: x86_64/sensord-10.0.0-1.x86_64.rpm
checksum_type: sha256
description:
  This package provides the fully functional internal API library and the service daemon
  of the Sensor Framework. The library replaces the dummy library installed by sensord-dummy.


pkgId: f3dcafb0bbeeb84d265236832025e10dbdcaece92f014f53b337070f928654b5
name: sensord-dummy
arch: x86_64
version: 10.0.0
epoch: 0
release: 1
summary: Sensor Framework 'dummy' library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Sensor Framework
rpm_sourcerpm: sensord-10.0.0-1.src.rpm
location_href: x86_64/sensord-dummy-10.0.0-1.x86_64.rpm
checksum_type: sha256
description:
  This package provides the dummy library of the sensor internal API.
  Installing sensord replaces this dummy library with the actually functional library.


pkgId: 5a677593eac4a95d41718e8f1cea2c2d7a86c6665b77ccf748224a8b57b912dd
name: sgml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 0
summary: Common SGML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Applications/Text
rpm_sourcerpm: sgml-common-0.6.3-0.src.rpm
location_href: noarch/sgml-common-0.6.3-0.noarch.rpm
checksum_type: sha256
description:
  The sgml-common package contains a collection of entities and DTDs
  that are useful for processing SGML, but that don't need to be
  included in multiple packages.  Sgml-common also includes an
  up-to-date Open Catalog file.


pkgId: f6622755f518b7c72476ccfe69bc12929f457357e032d8b087c2abec7839695e
name: shared-mime-info
arch: x86_64
version: 1.7
epoch: 0
release: 0
summary: Shared MIME Database
url: http://freedesktop.org/wiki/Software/shared-mime-info
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Base/Configuration
rpm_sourcerpm: shared-mime-info-1.7-0.src.rpm
location_href: x86_64/shared-mime-info-1.7-0.x86_64.rpm
checksum_type: sha256
description:
  This package contains:

  - The freedesktop.org shared MIME database spec.

  - The merged GNOME and KDE databases, in the new format.

  - The update-mime-database command, used to install new MIME data.


pkgId: b4cc10e17fc9ccf605a181c2786fafa4b9b4a5fd21052b840038c02aae45b17b
name: snappy-devel
arch: x86_64
version: 1.1.7
epoch: 0
release: 0
summary: Development files for snappy
url: https://github.com/google/snappy/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: snappy-1.1.7-0.src.rpm
location_href: x86_64/snappy-devel-1.1.7-0.x86_64.rpm
checksum_type: sha256
description:
  Snappy is a compression/decompression library. It does not aim for maximum
  compression, or compatibility with any other compression library; instead, it
  aims for very high speeds and reasonable compression. For instance, compared to
  the fastest mode of zlib, Snappy is an order of magnitude faster for most
  inputs, but the resulting compressed files are anywhere from 20% to 100%
  bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy
  compresses at about 250 MB/sec or more and decompresses at about
  500 MB/sec or more.

  This package holds the development files for snappy.


pkgId: a4bfccb0b0a27767fa74e06c9a7e1d1cd2415730b9cffb92af7bcdab57ae98de
name: soundtouch
arch: x86_64
version: 2.1.0
epoch: 0
release: 0
summary: Audio processing library
url: https://gitlab.com
rpm_license: LGPL-2.1
rpm_vendor: tizen
rpm_group: Multimedia/Libraries
rpm_sourcerpm: soundtouch-2.1.0-0.src.rpm
location_href: x86_64/soundtouch-2.1.0-0.x86_64.rpm
checksum_type: sha256
description:
  Soundtouch is an audio processing library that allows changing
  the sound tempo, pitch and playback rate parameters independently from eash other.


pkgId: 19b9b2a994e0adfb2d1a0279b5a5eccb79c4c654eef14aa83acd5c1f63d63d63
name: sqlcipher
arch: x86_64
version: 4.6.1
epoch: 0
release: 0
url: https://github.com/sqlcipher/sqlcipher
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Security/Crypto Libraries
rpm_sourcerpm: sqlcipher-4.6.1-0.src.rpm
location_href: x86_64/sqlcipher-4.6.1-0.x86_64.rpm
checksum_type: sha256
summary:
  SQLCipher is an open source extension to SQLite that provides transparent 256-bit AES encryption of database files

description:
  SQLCipher is an open source library that provides transparent, secure 256-bit
  AES encryption of SQLite database files. SQLCipher has been adopted as a secure
  database solution by many commercial and open source products, making it one of
  the most popular encrypted database platforms for Mobile, Embedded, and Desktop
  applications.


pkgId: 1871146fb294777e01d48e9db0c26c9625b4dbcff9c3bc8427269f6ea8ef0959
name: ssat
arch: x86_64
version: 1.4.0
epoch: 0
release: 0
summary: Shell Script Automated Tester
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: ssat-1.4.0-0.src.rpm
rpm_packager: MyungJoo Ham <myungjoo.ham@samsung.com>
location_href: x86_64/ssat-1.4.0-0.x86_64.rpm
checksum_type: sha256
description:
  SSAT provides testing environment for shell scripts with Apache-2.0 license.
  This is created to avoid any complications related with GPL licenses.


pkgId: 201688db4998c78e406dbb7568ce77920fbc799e18f774b70bdfa20e6b861586
name: sshfs
arch: x86_64
version: 2.10
epoch: 0
release: 0
summary: A network filesystem client to connect to SSH servers
url: https://github.com/libfuse/sshfs
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Base/File Systems
rpm_sourcerpm: sshfs-2.10-0.src.rpm
location_href: x86_64/sshfs-2.10-0.x86_64.rpm
checksum_type: sha256
description:
  SSHFS (Secure SHell FileSystem) allows you to mount a remote filesystem
  using SFTP. Now that most SSH servers support and enable this SFTP access
  by default, the SSHFS is very simple to use. It means that there is nothing
  to do on the server-side. Note that SSHFS requires FUSE (Filesystem in
  USErspace) filesystem, that lets non-privileged users create own file systems
  without editing Linux kernel code.


pkgId: 79c70739594b6994845b340d6e8b80810a6f1abf816940abfcffb774659bc4be
name: strace
arch: x86_64
version: 6.6
epoch: 0
release: 0
summary: A utility to trace the system calls of a program
url: http://sourceforge.net/projects/strace/
rpm_license: LGPL-2.1+ and GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: strace-6.6-0.src.rpm
location_href: x86_64/strace-6.6-0.x86_64.rpm
checksum_type: sha256
description:
  With strace, you can trace the activity of a program.  Information
  about any system calls the program makes and the signals it receives
  and processes can be seen.  Child processes can also be tracked.


pkgId: b53cd2ec6a601c6cbf7664a570e3ee9c3ce81a2085c1b065b5e58e4a7c819f21
name: sudo
arch: x86_64
version: 1.9.17p2
epoch: 0
release: 0
summary: Execute some commands as root
url: http://www.sudo.ws/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sudo-1.9.17p2-0.src.rpm
location_href: x86_64/sudo-1.9.17p2-0.x86_64.rpm
checksum_type: sha256
description:
  Sudo is a command that allows users to execute some commands as root.
  The /etc/sudoers file (edited with 'visudo') specifies which users have
  access to sudo and which commands they can run. Sudo logs all its
  activities to syslogd, so the system administrator can keep an eye on
  things. Sudo asks for the password for initializing a check period of a
  given time N (where N is defined at installation and is set to 5
  minutes by default).


pkgId: 1426537599bfaf2b64e0c7209aa30698719f69598a5c533cbf5026473aabfbc4
name: sudo-rpm
arch: x86_64
version: 1.9.17p2
epoch: 0
release: 0
summary: Script making possible to run RPM as root from inside build
url: http://www.sudo.ws/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: sudo-1.9.17p2-0.src.rpm
location_href: x86_64/sudo-rpm-1.9.17p2-0.x86_64.rpm
checksum_type: sha256
description:
  The package will add ALL ALL = (root) NOPASSWD: /usr/bin/rpm to sudoers and
  makes possible to install packages from inside build.


pkgId: 61009ad409c891b1c0a95f0f7e18f8709894ada47c633d5089c8a224fa27ee71
name: swig
arch: x86_64
version: 4.0.2
epoch: 0
release: 0
summary: Simplified Wrapper and Interface Generator
url: http://www.swig.org/
rpm_license: GPL-3.0+ and BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Languages/C and C++
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: x86_64/swig-4.0.2-0.x86_64.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.


pkgId: dd8d8ea97793dcac6e753145685fc6fa939e4cc7a20871c6fbcbce7d4f590c09
name: swig-doc
arch: noarch
version: 4.0.2
epoch: 0
release: 0
summary: SWIG Manual
url: http://www.swig.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Documentation/Man
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: noarch/swig-doc-4.0.2-0.noarch.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.

  This package contains the SWIG manual.


pkgId: c607ff6ea7f52a10072efcb1a16bbdd6a51d7cc5301ef590561b889fc35a2e30
name: swig-examples
arch: x86_64
version: 4.0.2
epoch: 0
release: 0
summary: SWIG example files
url: http://www.swig.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Documentation/Howto
rpm_sourcerpm: swig-4.0.2-0.src.rpm
location_href: x86_64/swig-examples-4.0.2-0.x86_64.rpm
checksum_type: sha256
description:
  SWIG is a compiler that attempts to make it easy to integrate C, C++,
  or Objective-C code with scripting languages including Perl, Tcl, and
  Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations
  and it generates an interface between C and your favorite scripting
  language.  However, this is only scratching the surface of what SWIG
  can do--some of its more advanced features include automatic
  documentation generation, module and library management, extensive
  customization options, and more.

  This package contains SWIG examples, useful both for testing and
  understandig SWIG usage.


pkgId: 01c1024ccf245daf2f408a23ef5a8a47d8145ee297734674d1adfb8ae10680b3
name: sysprof-cli
arch: x86_64
version: 1.2.0
epoch: 0
release: 0
summary: Sampling CPU profiler (CLI)
url: http://sysprof.com/
rpm_license: GPL v2 or later
rpm_vendor: tizen
rpm_group: Development/Tools/Debuggers
rpm_sourcerpm: sysprof-1.2.0-0.src.rpm
location_href: x86_64/sysprof-cli-1.2.0-0.x86_64.rpm
checksum_type: sha256
description:
  Sysprof is a sampling CPU profiler for Linux.
  This package contains the command-line data-collection part only.


pkgId: 7d03b0a1c375c63dac5af69d64faf6eb8a49a2b02778082e23dc5d8dc72ae531
name: system-rw-update
arch: x86_64
version: 1.3.0
epoch: 0
release: 0
summary: System RW Update Manager
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: system-rw-update-1.3.0-0.src.rpm
location_href: x86_64/system-rw-update-1.3.0-0.x86_64.rpm
checksum_type: sha256
description:
  System RW update manager provides interface for running platform/application update scripts
  after software is updated to new version which is implemented by using systemd offline update.


pkgId: f38544278c0bcdb40b719ce5fac5fd51de29c9be8e59d95a3275a31bdfcd7f9c
name: system-servant-profile_common
arch: x86_64
version: 0.2.2
epoch: 0
release: 1
summary: System-servant configured for common profile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: system-servant-0.2.2-1.src.rpm
location_href: x86_64/system-servant-profile_common-0.2.2-1.x86_64.rpm
checksum_type: sha256
description:
  System-popup (system-servant) configured for common profile.
  The binary is shared between common/tv.


pkgId: be2866f4982899005763280ccdb3942dd0f399abba00eeba5e48bc92a3b55911
name: systemd
arch: x86_64
version: 244
epoch: 0
release: 0
summary: A System and Service Manager
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+ and GPL-2.0+
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: x86_64/systemd-244-0.x86_64.rpm
checksum_type: sha256
description:
  systemd is a system and service manager for Linux, compatible with
  SysV and LSB init scripts. systemd provides aggressive parallelization
  capabilities, uses socket and D-Bus activation for starting services,
  offers on-demand starting of daemons, keeps track of processes using
  Linux cgroups, supports snapshotting and restoring of the system
  state, maintains mount and automount points and implements an
  elaborate transactional dependency-based service control logic. It can
  work as a drop-in replacement for sysvinit.


pkgId: 204ff86632a2b73f8053f2e28e50e53ca742adeb18bfc7014566cd23e4388042
name: systemd-analyze
arch: x86_64
version: 244
epoch: 0
release: 0
summary: Tool for processing systemd profiling information
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: x86_64/systemd-analyze-244-0.x86_64.rpm
checksum_type: sha256
description:
  'systemd-analyze blame' lists which systemd unit needed how much time to finish
  initialization at boot.
  'systemd-analyze plot' renders an SVG visualizing the parallel start of units
  at boot.


pkgId: 00328fbd399633ba34445b2cede4516c80faa78cae9f59e973c959193a8a0c4e
name: systemd-tests
arch: x86_64
version: 244
epoch: 0
release: 0
summary: Set of tests for sd-bus component
url: http://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPL-2.1+ and BSD-2-Clause
rpm_vendor: tizen
rpm_group: Base/Startup
rpm_sourcerpm: systemd-244-0.src.rpm
location_href: x86_64/systemd-tests-244-0.x86_64.rpm
checksum_type: sha256
description:
  This package is part of 'dbus-integratnion-tests' framework and contains set of tests
  for sd-bus component (DBUS API C library).


pkgId: 03d0632a1cf0108320c8819ce4d21e0b1afea81d2d878a273ded6739747c715a
name: sz2-devel
arch: x86_64
version: 1.0.1
epoch: 0
release: 0
summary: Development files for libsz2
url: https://gitlab.dkrz.de/k202009/libaec
rpm_license: BSD-2-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries/C and C++
rpm_sourcerpm: libaec-1.0.1-0.src.rpm
location_href: x86_64/sz2-devel-1.0.1-0.x86_64.rpm
checksum_type: sha256
description:
  Header files for libsz2, a drop-in replacement for the
  SZIP library (http://www.hdfgroup.org/doc_resource/SZIP).


pkgId: 66c943eaa0a5e5f2738680def2dc3dee214cc657a7f3bb2dfca33e3f7575ba66
name: tayga
arch: x86_64
version: 0.9.2
epoch: 0
release: 1
summary: Simple, no-fuss NAT64 for Linux
url: http://www.litech.org/tayga/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Tools
rpm_sourcerpm: tayga-0.9.2-1.src.rpm
location_href: x86_64/tayga-0.9.2-1.x86_64.rpm
checksum_type: sha256
description:
  TAYGA is an out-of-kernel stateless NAT64 implementation for Linux that uses
  the TUN driver to exchange IPv4 and IPv6 packets with the kernel.
  It is intended to provide production-quality NAT64 service for networks
  where dedicated NAT64 hardware would be overkill.


pkgId: 16aaaebee1eba1e17eea7792a935fae8001f58aacbbcd8763fd24554dc0fabeb
name: tcpdump
arch: x86_64
version: 4.9.3
epoch: 0
release: 1
summary: A Packet Sniffer
url: http://www.tcpdump.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Productivity/Networking/Diagnostic
rpm_sourcerpm: tcpdump-4.9.3-1.src.rpm
location_href: x86_64/tcpdump-4.9.3-1.x86_64.rpm
checksum_type: sha256
description:
  This program can "read" all or only certain packets going over the
  ethernet. It can be used to debug specific network problems.


pkgId: 27833e367387c37a16aa875a13a14d86447f48123668183a4f93fd17893cb1c1
name: tidl-action-toolchain
arch: x86_64
version: 2.9.1
epoch: 0
release: 1
summary: Tizen Action toolchain for TIDL
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Building
rpm_sourcerpm: tidl-2.9.1-1.src.rpm
location_href: x86_64/tidl-action-toolchain-2.9.1-1.x86_64.rpm
checksum_type: sha256
description:
  Tizen Action toolchain utilities for converting .action and .entity schemas
  to TIDL and generating service stubs through tidlc.


pkgId: 10dccdc78acdde98a9436a65c79bf012ae716479b99c682a8014e533f069158c
name: tizen-debug
arch: x86_64
version: 2.40
epoch: 0
release: 1
summary: libc debug information with .debug_frame section only and ld debug information
rpm_license: LGPL-2.1+ and LGPL-2.1+-with-GCC-exception and GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: tizen-debug-2.40-1.src.rpm
location_href: x86_64/tizen-debug-2.40-1.x86_64.rpm
checksum_type: sha256
description:
  The package contains the libc.so debug library with .debug_frame section only
  which can be helpful during signal frame backtrace.
  Also, the ld.so debug information is included for the debugging convenience.


pkgId: b312c4299ba8981fd92ed4e45d0875f04dc9c4b515458f30570a9469741f4646
name: tlm
arch: x86_64
version: 1.0.3
epoch: 0
release: 1
summary: Login manager for Tizen
url: https://github.com/01org/tlm
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: System/Service
rpm_sourcerpm: tlm-1.0.3-1.src.rpm
location_href: x86_64/tlm-1.0.3-1.x86_64.rpm
checksum_type: sha256
description:
  TLM is a daemon that handles user logins in a multi-user, multi-seat system by
  authenticating the users through PAM, and setting up, launching, and tracking
  user sessions.


pkgId: f31e536f758b29c02034efc2ed16514728f894ae5d9182eb0e008452f0e2dd1c
name: tolua++
arch: x86_64
version: 1.0.93
epoch: 0
release: 0
summary: C/C++ with Lua Integration Tool
url: http://www.codenix.com/~tolua/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: tolua++-1.0.93-0.src.rpm
location_href: x86_64/tolua++-1.0.93-0.x86_64.rpm
checksum_type: sha256
description:
  tolua++ is an extended version of tolua, a tool to integrate C/C++ code with
  Lua. tolua++ includes new features oriented to c++ such as:
  * support for std::string as a basic type (this can be turned off by a command
    line option)
  * support for class templates
  as well as other features and bugfixes.


pkgId: f0ff28258ad86e72c7a6a1e124c912782005ab557877fe3bff35e5f383292aa3
name: toybox
arch: x86_64
version: 0.6.0
epoch: 0
release: 1
summary: Single binary providing simplified versions of system commands
url: http://www.landley.net/toybox/
rpm_license: BSD-2.0
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: toybox-0.6.0-1.src.rpm
location_href: x86_64/toybox-0.6.0-1.x86_64.rpm
checksum_type: sha256
description:
  Toybox is a single binary which includes versions of a large number
  of system commands, including a shell.  This package can be very
  useful for recovering from certain types of system failures,
  particularly those involving broken shared libraries.


pkgId: d3abe4a061d78036fc0120c900d2e0e4d48bdf72296b2d6000257ef62a108045
name: trust-anchor
arch: x86_64
version: 2.1.2
epoch: 0
release: 0
summary: Trust Anchor API
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Security/Certificate Management
rpm_sourcerpm: trust-anchor-2.1.2-0.src.rpm
location_href: x86_64/trust-anchor-2.1.2-0.x86_64.rpm
checksum_type: sha256
description:
  The package provides trust-anchor which the application can assign
  SSL root certificates for its HTTPS communication.


pkgId: 028fc8b808b3a2b18b8e009ebc81a2855ce4060a9b7b2ba01e630aa9425d0ce5
name: tvm-runtime
arch: x86_64
version: 0.7.0
epoch: 0
release: 0
summary: TVM Runtime Library
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: tvm-runtime-0.7.0-0.src.rpm
location_href: x86_64/tvm-runtime-0.7.0-0.x86_64.rpm
checksum_type: sha256
description:
  Apache TVM is a compiler stack for deep learning systems. It is designed to close the gap between the productivity-focused deep learning frameworks, and the performance- and efficiency-focused hardware backends. TVM works with deep learning frameworks to provide end to end compilation to different backends.


pkgId: 286e7dcc8c9773848c9eb4c536d3475d1ae5e020b3ee718c0320aba1860d5ed5
name: typelib-1_0-Atspi-2_0
arch: x86_64
version: 2.44.1
epoch: 0
release: 1
summary: An Accessibility ToolKit -- Introspection bindings
url: http://www.gnome.org/
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: at-spi2-core-2.44.1-1.src.rpm
location_href: x86_64/typelib-1_0-Atspi-2_0-2.44.1-1.x86_64.rpm
checksum_type: sha256
description:
  AT-SPI is a general interface for applications to make use of the
  accessibility toolkit. This version is based on dbus.

  This package provides the GObject Introspection bindings for the
  libatspi library.


pkgId: 4d0591448370812f01f5902645c34056aadb06f3bac8546446375b6374c9c9ef
name: typelib-Json
arch: x86_64
version: 1.8.0
epoch: 0
release: 0
summary: Introspection bindings for libjson-glib
url: https://wiki.gnome.org/Projects/JsonGlib
rpm_license: LGPL-2.1-or-later
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: json-glib-1.8.0-0.src.rpm
location_href: x86_64/typelib-Json-1.8.0-0.x86_64.rpm
checksum_type: sha256
description:
  JSON-GLib provides a parser and a generator GObject classes and various
  wrappers for the complex data types employed by JSON, such as arrays
  and objects.

  This package provides the GObject Introspection bindings for JSON-GLib.


pkgId: 6e97dd9bfd7998e52865c4d24c31e5e23eb3508d8d545ae2fd7ce04ae6be7a05
name: typelib-Soup
arch: x86_64
version: 2.72.0
epoch: 0
release: 1
summary: HTTP client/server library for GNOME -- Introspection bindings
url: http://www.gnome.org
rpm_license: LGPL-2.0+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: libsoup-2.72.0-1.src.rpm
location_href: x86_64/typelib-Soup-2.72.0-1.x86_64.rpm
checksum_type: sha256
description:
  Libsoup is an HTTP client/server library for GNOME. It uses GObjects
  and the glib main loop, to integrate well with GNOME applications.

  This package provides the GObject Introspection bindings for libsoup.


pkgId: faa23f777c518e0928c97a1cf7c813b0325bb699c2090b49d8205147492f254d
name: united-service
arch: x86_64
version: 1.3.2
epoch: 0
release: 0
summary: United Service
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: App Framework/Application Core
rpm_sourcerpm: united-service-1.3.2-0.src.rpm
location_href: x86_64/united-service-1.3.2-0.x86_64.rpm
checksum_type: sha256
description:
  United service is to integrate multiple currently independent daemons into one process
  to improve management efficiency, optimize resource usage, and ensure consistency between services.


pkgId: 27e8e882e8800fa77beee8aab542db32f08fee5aa5c9982076dad2d5e426a08e
name: update-desktop-files
arch: noarch
version: 12.1
epoch: 0
release: 0
summary: A Build Tool to Update Desktop Files
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools
rpm_sourcerpm: update-desktop-files-12.1-0.src.rpm
location_href: noarch/update-desktop-files-12.1-0.noarch.rpm
checksum_type: sha256
description:
  This package provides further translations and a shell script to update
  desktop files. It is used by the %tizen_update_desktop_file rpm macro.


pkgId: b020466f055ada7da9789ef454389f6b520450cadb2aeccad1f5285d2d8995ba
name: upgrade-parse-dynparts
arch: x86_64
version: 10.0.0
epoch: 0
release: 0
summary: Utility needed to parse dynamic partition on-disk format
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: x86_64/upgrade-parse-dynparts-10.0.0-0.x86_64.rpm
checksum_type: sha256
description:
  This package provides utility needed to parse "super" on-disk format, and print
  out necessary device mapper maps, needed to later mount filesystems contained in
  dynamic partition area.


pkgId: f89ca43974f59686b77d96fd40ce1f880305d1c8c6e2971f43cc7247c3e42015
name: upgrade-resize-dynparts
arch: x86_64
version: 10.0.0
epoch: 0
release: 0
summary: Utility for modification of dynamic partitions size in super metadata
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: x86_64/upgrade-resize-dynparts-10.0.0-0.x86_64.rpm
checksum_type: sha256
description:
  This package provides utility needed to modify metadata of a super partition by
  changing size of dynamic partitions.


pkgId: cbf6f3ba360ad75fe9b147196e4a8faac709b9a9352f234eb498a6dfa7343fe6
name: upgrade-ro
arch: x86_64
version: 10.0.0
epoch: 0
release: 0
summary: Contains all necessary tools to perform RO Upgrade
rpm_license: MIT, Apache-2.0
rpm_vendor: tizen
rpm_group: System
rpm_sourcerpm: upgrade-10.0.0-0.src.rpm
location_href: x86_64/upgrade-ro-10.0.0-0.x86_64.rpm
checksum_type: sha256
description:
  Update engine adding all necessary tools, scripts and configuration
  for updating Tizen platform images using delta files as generated by
  upgrade-tools.


pkgId: dceb01a095804b7da5ecb2b18be0919cb9a3bfb1fb92124b676cc4ca198e820e
name: valgrind
arch: x86_64
version: 3.25.0
epoch: 0
release: 0
summary: Memory Management Debugger
url: http://valgrind.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Development/Tools/Debuggers
rpm_sourcerpm: valgrind-3.25.0-0.src.rpm
location_href: x86_64/valgrind-3.25.0-0.x86_64.rpm
checksum_type: sha256
description:
  Valgrind checks all memory operations in an application, like read,
  write, malloc, new, free, and delete. Valgrind can find uses of
  uninitialized memory, access to already freed memory, overflows,
  illegal stack operations, memory leaks, and any illegal
  new/malloc/free/delete commands. Another program in the package is
  "cachegrind," a profiler based on the valgrind engine.

  To use valgrind you should compile your application with "-g -O0"
  compiler options. Afterwards you can use it with:

  valgrind --tool=memcheck --sloppy-malloc=yes --leak-check=yes
  --db-attach=yes my_application, for example.

  More valgrind options can be listed via "valgrind --help". A
  debugged application runs slower and needs much more memory, but
  is usually still usable. Valgrind is still in development, but it
  has been successfully used to optimize several KDE applications.


pkgId: ee5f85205c15005342cbb79b2b705adf548c82936a99e26a4f7457a221dbfb9d
name: vconf-internal-keys-config-profile_common
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for common
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_common-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for common
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 750d31b5ac9dde0f0201c8f327bd37805fd6ac7744731ff71ef818e3cdda3bab
name: vconf-internal-keys-config-profile_ivi
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for ivi
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_ivi-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for ivi
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 5b69044438f0d69313e7feea8f1b9106ca6563dff8ff6a070d61e94128b32699
name: vconf-internal-keys-config-profile_mobile
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for mobile
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_mobile-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for mobile.
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 0dd99141c565aa3010a3f8538caa340f005ac926c89116c2e121646901aaed09
name: vconf-internal-keys-config-profile_tv
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for tv
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_tv-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for tv
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 6443f74e0aa9e70bb8ebad8196fe3b31e2eb5f033192010f47af2a4aafb8ddba
name: vconf-internal-keys-config-profile_wearable
arch: x86_64
version: 0.0.199
epoch: 0
release: 0
summary: Configure vconf internal shared keys for wearable
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Application Framework/Configuration
rpm_sourcerpm: vconf-internal-keys-0.0.199-0.src.rpm
location_href: x86_64/vconf-internal-keys-config-profile_wearable-0.0.199-0.x86_64.rpm
checksum_type: sha256
description:
  The vconf-internal-keys configurator for wearable
  Vconf-internal-keys requires one of config-profile_* packages
  installed to execute vconf configuration for buxton2.


pkgId: 6dbfc44d01f2b993daa9bc9ef7dc38227f02023485cab3108be8aafac9b67fe7
name: verity-tools
arch: x86_64
version: 2.3
epoch: 0
release: 1
summary: A tool for dm-verity
rpm_license: MIT
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: initrd-2.3-1.src.rpm
location_href: x86_64/verity-tools-2.3-1.x86_64.rpm
checksum_type: sha256
description:
  verityctl tool for dm-verity. Similar with veritysetup of cryptsetup
  but it can handle with verity meta data block.


pkgId: 4fc5e385dd69cef7d984c1fc0f92d935bf71f2a4ce979156d25d6f7106bf16e3
name: vi
arch: x86_64
version: 050325
epoch: 0
release: 1
summary: The Traditional Vi
url: http://ex-vi.sourceforge.net/
rpm_license: BSD-4-Clause-UC and BSD-4-Clause-Caldera
rpm_vendor: tizen
rpm_group: Base/Utilities
rpm_sourcerpm: vi-050325-1.src.rpm
location_href: x86_64/vi-050325-1.x86_64.rpm
checksum_type: sha256
description:
  Compared to most of its many clones, the traditional vi is a rather small
  program just with its extremely powerful editing interface, but lacking fancy
  features like multiple undo, multiple screens, or syntax highlighting.
  This port of vi has generally preserved the original style, terminal control,
  and feature set. It adds support for international character sets, including
  multibyte encodings such as UTF-8, and some minor enhancements that were not
  present in BSD vi 3.7, but had been included in later vi versions for System V
  or in POSIX.2.


pkgId: 64f4d2b0a1b62cb41c7cc4876959e510530c725e60474b2bee69deb3c041c078
name: vpx-tools
arch: x86_64
version: 1.12.0
epoch: 0
release: 2
summary: VP8 codec library - Utilities
url: http://www.webmproject.org/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Multimedia/Libraries
rpm_sourcerpm: libvpx-1.12.0-2.src.rpm
location_href: x86_64/vpx-tools-1.12.0-2.x86_64.rpm
checksum_type: sha256
description:
  This package contains utilities around the vp8 codec sdk.

  WebM is an open, royalty-free, media file format designed for the web.

  WebM defines the file container structure, video and audio formats.
  WebM files consist of video streams compressed with the VP8 video codec
  and audio streams compressed with the Vorbis audio codec.
  The WebM file structure is based on the Matroska container.


pkgId: 91798e6cfaa4a3cba8caab2642c7b57adab57e25dff82e9ca54e91bf0c8b2d9f
name: vulkan-loader-devel
arch: x86_64
version: 1.3.296
epoch: 0
release: 0
summary: Development files for vulkan-loader
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-loader-1.3.296-0.src.rpm
location_href: x86_64/vulkan-loader-devel-1.3.296-0.x86_64.rpm
checksum_type: sha256
description:
  The vulkan-loader-devel package contains libraries and header files for
  developing applications that use vulkan-loader.


pkgId: 84963348f8ac28f28feb38baef7e844f95182afff5555d70d33ffd01ca5399da
name: vulkan-utility-libraries
arch: x86_64
version: 1.3.296
epoch: 0
release: 0
summary: Vulkan utility libraries
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-utility-libraries-1.3.296-0.src.rpm
location_href: x86_64/vulkan-utility-libraries-1.3.296-0.x86_64.rpm
checksum_type: sha256
description:
  This repo was created to share code across various Vulkan repositories,
  solving long standing issues for Vulkan SDK developers and users.


pkgId: f27b97cd4a7836e3f567cfd197430a8d103a049204f58971f6654fc55f254140
name: vulkan-validation-layers-devel
arch: x86_64
version: 1.3.296
epoch: 0
release: 0
summary: Development files for vulkan-validation-layers
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/GL
rpm_sourcerpm: vulkan-validation-layers-1.3.296-0.src.rpm
location_href: x86_64/vulkan-validation-layers-devel-1.3.296-0.x86_64.rpm
checksum_type: sha256
description:
  The vulkan-validation-layers-devel package contains libraries and header files for
  developing applications that use vulkan-validation-layers.


pkgId: 80be0013fc18a6d0b265bffa2e6835c3a3409c4690bbabcac98fe7da50e2948f
name: wayland-devel
arch: x86_64
version: 1.23.1
epoch: 0
release: 0
summary: Development files for the Wayland Compositor Infrastructure
url: http://wayland.freedesktop.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-1.23.1-0.src.rpm
location_href: x86_64/wayland-devel-1.23.1-0.x86_64.rpm
checksum_type: sha256
description:
  Wayland is a protocol for a compositor to talk to its clients as well
  as a C library implementation of that protocol. The compositor can be
  a standalone display server running on Linux kernel modesetting and
  evdev input devices, an X application, or a wayland client itself.
  The clients can be traditional applications, X servers (rootless or
  fullscreen) or other display servers.

  This package contains all necessary include files and libraries needed
  to develop applications that require these.


pkgId: 9a9ddede2dd804295e67446c49ed0381fa73a147fdd39367e80e6b027fe3adb6
name: wayland-extension-client-devel
arch: x86_64
version: 1.3.84
epoch: 0
release: 0
summary: Client development files for the Wayland Extension Protocol
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.84-0.src.rpm
location_href: x86_64/wayland-extension-client-devel-1.3.84-0.x86_64.rpm
checksum_type: sha256
description:
  wayland-extension is a protocol for tizen window system.

  This package contains all necessary include files and libraries needed
  to develop applications that require these.


pkgId: 5198fe23fdbfb62d6eb2aeda08b35a28d2cd067f22e8bd87b80b1460de684b7d
name: wayland-extension-server-devel
arch: x86_64
version: 1.3.84
epoch: 0
release: 0
summary: Server development files for the Wayland Extension Protocol
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.84-0.src.rpm
location_href: x86_64/wayland-extension-server-devel-1.3.84-0.x86_64.rpm
checksum_type: sha256
description:
  wayland-extension is a protocol for tizen window system.

  This package contains all necessary include files and libraries needed
  to develop a compositor that require these.


pkgId: 54b1bc050ee993fa79175601d906bacd73a6adbc75055c4eb8254cfe23cade8d
name: wayland-protocols
arch: x86_64
version: 1.3.84
epoch: 0
release: 0
summary: Wayland upstream protocols
url: http://www.tizen.org/
rpm_license: MIT
rpm_vendor: tizen
rpm_group: Graphics & UI Framework/Development
rpm_sourcerpm: wayland-extension-1.3.84-0.src.rpm
location_href: x86_64/wayland-protocols-1.3.84-0.x86_64.rpm
checksum_type: sha256
description:
  wayland-protocols contains Wayland upstream protocols that add functionality not available in the Wayland core protocol


pkgId: a2bf5eada54d4a88b537458c6919e4c3c3cffc7c95b4a8ee54ad1a955a5e038a
name: wdiff
arch: x86_64
version: 1.2.2
epoch: 0
release: 1
summary: Display Word Differences Between Text Files
url: https://ftp.gnu.org/gnu/wdiff/
rpm_license: GPL-3.0+
rpm_vendor: tizen
rpm_group: Productivity/Text/Utilities
rpm_sourcerpm: wdiff-1.2.2-1.src.rpm
location_href: x86_64/wdiff-1.2.2-1.x86_64.rpm
checksum_type: sha256
description:
  wdiff compares two files and finds which words have been deleted or
  added to old_file to get new_file. A word is considered to be anything
  between whitespace.

  Xwdiff is a handy X Window System front-end, based on Tcl/Tk.


pkgId: 2c729c2176e3ac946133fb04afe82a20ba5148cb60644649bd70d54908fc99c8
name: webauthn-ble-manual-tests
arch: x86_64
version: 1.0.8
epoch: 0
release: 1
summary: Adaptation Layer of Web Authentication Service for BLE Authenticator (manual test)
rpm_license: Apache-2.0
rpm_vendor: tizen
rpm_group: Security/Development
rpm_sourcerpm: webauthn-ble-1.0.8-1.src.rpm
location_href: x86_64/webauthn-ble-manual-tests-1.0.8-1.x86_64.rpm
checksum_type: sha256
description:
  Adaptation Layer of Web Authentication Service for BLE Authenticator (manual test)
  The webauthn-manual-tests required to use webauthn-image-viewer


pkgId: f695e89618e241bb4d38b73ac50bc1d75154c5c2d7fe478c3fbc8cf9accc1168
name: webrtc-audio-processing
arch: x86_64
version: 0.3.1
epoch: 0
release: 2
summary: Library for echo cancellation
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: webrtc-audio-processing-0.3.1-2.src.rpm
location_href: x86_64/webrtc-audio-processing-0.3.1-2.x86_64.rpm
checksum_type: sha256
description:
  webrtc-audio-processing is a library derived from Google WebRTC project that
  provides echo cancellation functionality. This library is used by for example
  PulseAudio to provide echo cancellation.


pkgId: 219fefbfb78c27b587ce08e1e9d0130ad5f42089ccf7ed3ad89934c640ce8ff8
name: webrtc-audio-processing-devel
arch: x86_64
version: 0.3.1
epoch: 0
release: 2
summary: Development files for webrtc-audio-processing
url: http://www.freedesktop.org/software/pulseaudio/webrtc-audio-processing/
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Unspecified
rpm_sourcerpm: webrtc-audio-processing-0.3.1-2.src.rpm
location_href: x86_64/webrtc-audio-processing-devel-0.3.1-2.x86_64.rpm
checksum_type: sha256
description:
  The webrtc-audio-processing-devel package contains libraries and header
  files for developing applications that use webrtc-audio-processing.


pkgId: 8c6be5e63b88b14eef3c21531bc2f3fab7c96a9a93077ba495cf2fcd18b2c215
name: wireless-regdb
arch: x86_64
version: 2013.01.11
epoch: 0
release: 0
summary: Linux wireless regulatory database
url: http://wireless.kernel.org/en/developers/Regulatory/
rpm_license: ISC
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: wireless-regdb-2013.01.11-0.src.rpm
location_href: x86_64/wireless-regdb-2013.01.11-0.x86_64.rpm
checksum_type: sha256
description:
  This package contains the wireless regulatory database used by all
  cfg80211 based Linux wireless drivers. The wireless database being
  used is maintained by John Linville, the Linux wireless kernel maintainer
  http://wireless.kernel.org/en/developers/Regulatory/


pkgId: ca35bb018e37a439bca71dc11e44640e0b4872fbff3bedd62c548e509163424c
name: wpa_supplicant
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: WPA supplicant implementation
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  wpa_supplicant is an implementation of the WPA Supplicant component,
  i.e., the part that runs in the client stations. It implements key
  negotiation with a WPA Authenticator and it controls the roaming and
  IEEE 802.11 authentication/association of the wlan driver.


pkgId: 0d8b733060bc47befc8485b8e5a7fd85c26015e1c7fba03d2b4cacab76cf58e6
name: wpa_supplicant-client_tool
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: Text-based client tool for wpa_supplicant and hostapd
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-client_tool-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  Text-based frontend programs for interacting with wpa_supplicant and hostapd.
  It is used to query current status, change configuration,
  trigger events, and request interactive user input.


pkgId: 5373d781bd4261bdadc6ca7a58ce445a33447fd4393ad5b1adce7ef17e93225d
name: wpa_supplicant-extension-TM1
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: Extension for mobile TM1
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-extension-TM1-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  Customized wpa_supplicant supporting SPRD-based boards including TM1.
  Having such ifdefs in public Tizen is really ugly, but for the sake
  of backward-compatibility, we have this subpackage. Please remove
  such variations later.


pkgId: 9bf6e75b54fdb0526852b42ddebd5160572ce8c6aa61a6521bddddb9adcd1a81
name: wpa_supplicant-extension-TM2
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: Extension for mobile TM2
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-extension-TM2-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  Customized wpa_supplicant supporting BROADCOM-based boards including TM1.
  Having such ifdefs in public Tizen is really ugly, but for the sake
  of backward-compatibility, we have this subpackage. Please remove
  such variations later.


pkgId: 7728b74b6804586e86cdd3afad73add1115c4b22e86fa870875bbd3bbd0452bb
name: wpa_supplicant-profile_tv
arch: x86_64
version: 2.10
epoch: 0
release: 2
summary: Patched wpa_supplicant for TV
url: http://hostap.epitest.fi/wpa_supplicant/
rpm_license: BSD-2.0 and GPL-2.0+
rpm_vendor: tizen
rpm_group: Network & Connectivity/Wireless
rpm_sourcerpm: wpa_supplicant-2.10-2.src.rpm
location_href: x86_64/wpa_supplicant-profile_tv-2.10-2.x86_64.rpm
checksum_type: sha256
description:
  TV-profile somehow wants to disable WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE
  unconditionally at wpa_supplicant/wpa_supplicant.c. It should later be
  determined at runtime/boottime, not at buildtime.


pkgId: 9bf2a8e9fe26bba04659084c084071789726a951f635d674375bb684cd4ce36d
name: xdelta3
arch: x86_64
version: 3.0.11
epoch: 0
release: 1
summary: The xdelta3
url: http://xdelta.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Libraries
rpm_sourcerpm: xdelta3-3.0.11-1.src.rpm
location_href: x86_64/xdelta3-3.0.11-1.x86_64.rpm
checksum_type: sha256
description:
  Xdelta3 is a set of tools designed to compute changes between
  binary files.  These changes (delta files) are similar to the output of the
  "diff" program, in that they may be used to store and transmit only the
  changes between files.  The "delta files" that Xdelta3 manages are
  stored in RFC3284 (VCDIFF) format.


pkgId: def698ed3fd21c7354f27e0d86b899a16e0cac451c77c5a06bfbc3407ac42222
name: xkeyboard-config
arch: x86_64
version: 2.13
epoch: 0
release: 0
summary: The X Keyboard Extension
url: http://www.freedesktop.org/Software/XKeyboardConfig
rpm_license: MIT
rpm_vendor: tizen
rpm_group: System/Utilities
rpm_sourcerpm: xkeyboard-config-2.13-0.src.rpm
location_href: x86_64/xkeyboard-config-2.13-0.x86_64.rpm
checksum_type: sha256
description:
  The X Keyboard Extension essentially replaces the core protocol
  definition of keyboard. The extension makes possible to clearly and
  explicitly specify most aspects of keyboard behaviour on per-key basis
  and to more closely track the logical and physical state of the
  keyboard. It also includes a number of keyboard controls designed to
  make keyboards more accessible to people with physical impairments.


pkgId: 6de0114780a4410863d290d9515edfd8e3db7c07e7a34808e767befddbfa76f5
name: xml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 0
summary: Common XML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL-2.0
rpm_vendor: tizen
rpm_group: Applications/Text
rpm_sourcerpm: sgml-common-0.6.3-0.src.rpm
location_href: noarch/xml-common-0.6.3-0.noarch.rpm
checksum_type: sha256
description:
  The xml-common is a subpackage of sgml-common which contains
  a collection XML catalogs that are useful for processing XML,
  but that don't need to be included in main package.


pkgId: 1e23003b410a1066057ffc382cd7030817865d4f6df5d58e40930ff1adb6f46f
name: xmlto
arch: x86_64
version: 0.0.28
epoch: 0
release: 0
summary: Tool for Converting XML Files to Various Formats
url: https://fedorahosted.org/xmlto/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: Productivity/Publishing/XML
rpm_sourcerpm: xmlto-0.0.28-0.src.rpm
location_href: x86_64/xmlto-0.0.28-0.x86_64.rpm
checksum_type: sha256
description:
  This is a package for converting XML files to various formats using XSL
  stylesheets.  As a processor it depends on xsltproc and as a formatter
  for print output it makes use of passivetex.


pkgId: 847928757369a0795b445507e5774b988880a2b9fa961de9a23c81686950929a
name: yum
arch: noarch
version: 3.4.3
epoch: 0
release: 0
summary: RPM package installer/updater/manager
url: http://yum.baseurl.org/
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Base
rpm_sourcerpm: yum-3.4.3-0.src.rpm
location_href: noarch/yum-3.4.3-0.noarch.rpm
checksum_type: sha256
description:
  Yum is a utility that can check for and automatically download and
  install updated RPM packages. Dependencies are obtained and downloaded
  automatically, prompting the user for permission as necessary.


pkgId: df43b2a88ffd492d3d3dbe64f6204a5ab63a3114eaa9df510e25c6d4ea92aa40
name: zbar
arch: x86_64
version: 0.10
epoch: 0
release: 23
summary: Bar code reader
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zbar-0.10-23.src.rpm
location_href: x86_64/zbar-0.10-23.x86_64.rpm
checksum_type: sha256
description:
  A layered barcode scanning and decoding library. Supports EAN, UPC, Code 128,
  Code 39 and Interleaved 2 of 5.
  Includes applications for decoding captured barcode images and using a video
  device (eg, webcam) as a barcode scanner.


pkgId: d223a012046ea4f448bda3c70afd4d7d1e06fd2d01d55d204dce35721b652826
name: zbar-devel
arch: x86_64
version: 0.10
epoch: 0
release: 23
summary: Bar code library extra development files
rpm_license: LGPL-2.1+
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zbar-0.10-23.src.rpm
location_href: x86_64/zbar-devel-0.10-23.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files and additional libraries used for
  developing applications that read bar codes with this library.


pkgId: febc2758085a5ae45b715a1b64d36dfed91932a238a8c7dd5e0e0fe499dc58dd
name: zint
arch: x86_64
version: 2.6.7
epoch: 0
release: 2
summary: Barcode generator library
url: http://www.zint.org.uk
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zint-2.6.7-2.src.rpm
location_href: x86_64/zint-2.6.7-2.x86_64.rpm
checksum_type: sha256
description:
  Zint is a C library for encoding data in several barcode variants. The
  bundled command-line utility provides a simple interface to the library.
  Features of the library:
  - Over 50 symbologies including all ISO/IEC standards, like QR codes.
  - Unicode translation for symbologies which support Latin-1 and
    Kanji character sets.
  - Full GS1 support including data verification and automated insertion of
    FNC1 characters.
  - Support for encoding binary data including NULL (ASCII 0) characters.
  - Health Industry Barcode (HIBC) encoding capabilities.
  - Output in the following file formats: PNG, GIF, EPS, WMF, BMP, TIF, SVG.
  - Verification stage for SBN, ISBN and ISBN-13 data.


pkgId: fa4462fdfd97c78425cd092a835bd7a0c3a580d6eed9d1649923493732c980ec
name: zint-devel
arch: x86_64
version: 2.6.7
epoch: 0
release: 2
summary: Library and header files for zint
url: http://www.zint.org.uk
rpm_license: BSD-3-Clause
rpm_vendor: tizen
rpm_group: Development/Libraries
rpm_sourcerpm: zint-2.6.7-2.src.rpm
location_href: x86_64/zint-devel-2.6.7-2.x86_64.rpm
checksum_type: sha256
description:
  C library and header files needed to develop applications that use
  the Zint library. The API documentation can be found on the project website:
  http://www.zint.org.uk/zintSite/Manual.aspx


pkgId: 5b9f960c9dbca91a94e40d358ef25cee35fd8f52bfd293a40524b9c06858ee45
name: zypper
arch: x86_64
version: 1.14.38
epoch: 0
release: 0
summary: Command line software manager using libzypp
url: http://en.opensuse.org/Zypper
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Package Management
rpm_sourcerpm: zypper-1.14.38-0.src.rpm
location_href: x86_64/zypper-1.14.38-0.x86_64.rpm
checksum_type: sha256
description:
  Zypper is a command line tool for managing software. It can be used to add
  package repositories, search for packages, install, remove, or update packages,
  install patches, hardware drivers, verify dependencies, and more.

  Zypper can be used interactively or non-interactively by user, from scripts,
  or front-ends.

  Authors:
  --------
      Jan Kupec <jkupec@suse.cz>
      Duncan Mac-Vicar <dmacvicar@suse.de>
      Martin Vidner <mvidner@suse.cz>
      Josef Reidinger <jreidinger@suse.cz>


pkgId: e64961f6de9fa94ec9cff566b53a7aeb07d061e9a5966db92c6513eb0cf4e3ae
name: zypper-tizen-config
arch: noarch
version: 1.14.38
epoch: 0
release: 0
summary: zypper repo configuration for Tizen:Unified developers
url: http://en.opensuse.org/Zypper
rpm_license: GPL-2.0+
rpm_vendor: tizen
rpm_group: System/Packages
rpm_sourcerpm: zypper-1.14.38-0.src.rpm
location_href: noarch/zypper-tizen-config-1.14.38-0.noarch.rpm
checksum_type: sha256
description:
  Zypper repo configuration for Tizen:Unified developers.
  This is for Tizen device and platform development.


# files

type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/compaction-times-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/compaction-times-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/event_analyzing_sample-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/event_analyzing_sample-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/export-to-postgresql-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/export-to-postgresql-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/export-to-sqlite-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/export-to-sqlite-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/futex-contention-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/futex-contention-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/intel-pt-events-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/intel-pt-events-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/net_dropmonitor-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/net_dropmonitor-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/sched-migration-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/sched-migration-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/syscall-counts-by-pid-record


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/perf/scripts/python/bin/syscall-counts-by-pid-report


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/config2csv.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/config_override.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/configcheck.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/configinit.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/console-badness.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/jitterstart.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/jitterstop.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kcsan-collapse.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-assign-cpus.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-check-branches.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-get-cpus-script.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale-ftrace.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-refscale.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck-scf.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-remote-noreap.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-remote.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/kvm-transform.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/parse-build.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/parse-console.sh


type: file
name:
  /boot/kernel/devel/emulator-kernel-6.18.2.tizen/tools/testing/selftests/rcutorture/bin/srcu_lockdep.sh


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/coco_labels_list.txt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.2.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.2.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.3.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_postprocess_tensors.3.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/mobilenetssd_tensors.1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_0.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_0.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_1.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_input_1.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_result_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/palm_detection_result_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov10_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov10_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov5_track_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_obb_decoder_input.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_obb_decoder_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_decoder_boundingbox/yolov8_result_golden.raw


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_custom/unittest_filter_custom.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_python3/unittest_filter_python3.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_reload/tensor_filter_reload_test.c


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.0


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.1


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/config_file_golden.2


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_filter_tensorflow2_lite/unittest_filter_tensorflow2_lite.cc


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/nnstreamer_repo_dynamicity/tensor_repo_dynamic_test.c


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/labels/google_lenet_ncsdk_caffe_1.labels


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/google_lenet_ncsdk_caffe_1.graph


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/invalid_class_custom_converter.py


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v1_1.0_224_quant.invalid


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v1_1.0_224_quant.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/mobilenet_v2_1.0_224_quant.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/multi_person_mobilenet_v1_075_float.tflite


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/ncnn_models/squeezenet_v1.1.bin


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/ncnn_models/squeezenet_v1.1.param


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/openvino_mobilenetv2-int8-tf-0001.bin


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/openvino_mobilenetv2-int8-tf-0001.xml


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_3x4_two_input_two_output.pt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_3x4_two_input_two_output.pte


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.pt


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.pte


type: file
name:
  /usr/lib/nnstreamer/bin/unittest-nnstreamer/tests/test_models/models/sample_4x4x4x4x4_two_input_one_output.tflite


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/attention_batched_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_batched.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_batched_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/attention_shared_kv_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/bn_channels_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/bn_channels_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/bn_width_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/bn_width_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_causal_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_minimum_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_mb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_causal_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_minimum_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv1d_sb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_minimum_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_mb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_1x1_kernel_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_minimum_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_no_overlap_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_dilation.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_dilation_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_uneven_remain.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_same_uneven_remain_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_valid_drop_last.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/conv2d_sb_valid_drop_last_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/dropout_0_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/dropout_100_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/dropout_20_inference_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/dropout_20_training_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/embedding_mixed_double_batch.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/embedding_mixed_single_batch.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/embedding_w32a32_single_batch.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_act.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_multi_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_seq.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_reset_after_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/gru_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_reset_after_single_step.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_reset_after_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_act.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/grucell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_act.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_act_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_multi_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_single_step_seq_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstm_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/lstmcell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_output_shape.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_output_shape_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_return_attention_scores.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_return_attention_scores_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_single_batch.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_single_batch_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_value_dim.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_value_dim_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/multi_head_attention_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_partial.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_partial_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/positional_encoding_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/rnncell_single_step_w16a16.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/upsample2d_2x2_bilinear.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/upsample2d_3x3_bilinear.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_layers/upsample2d_big_bilinear.nnlayergolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/bidirectional_lstm_single.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/bidirectional_lstm_stacked.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/fc_unroll_stacked_clipped.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/gru_reset_after_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/gru_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/lstm_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_gru_reset_after_return_sequence.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_gru_reset_after_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_gru_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_gru_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_disable_need_weights.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_kdim_vdim.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_head_attention_self_attention.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_lstm_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_lstm_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_rnn_return_sequence_with_batch.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/multi_rnn_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/pooling_avg_same_padding_multi_stride.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/pooling_max_same_padding_multi_stride.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/rnn_return_sequence_with_batch_n.info


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/split_axis2_split_number2.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/split_axis2_split_number4.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/split_axis3_split_number5.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_decoder_layer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_encoder_layer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_float_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/transformer_pseudo_bool_attn_mask.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_000_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_050_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_single_100_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_000_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_050_100.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_000.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_050.nnmodelgolden


type: file
name:
  /usr/lib64/nntrainer/bin/applications/res/test/unittest_models/zoneout_lstm_stacked_100_100.nnmodelgolden


type: file
name:
  /usr/lib64/python3.14/site-packages/SCons/Tool/docbook/docbook-xsl-1.76.1/epub/bin/xslt/obfuscate.xsl


type: file
name:
  /usr/lib64/python3.14/site-packages/SCons/Tool/docbook/docbook-xsl-1.76.1/tools/bin/docbook-xsl-update


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_none/config.xml


type: dir
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_use_decoration_invalid


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_box_size_use_decoration_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_mouse_event_not_bool/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_height_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_height_ood/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_pd_width_invalid/config.xml


type: file
name:
  /usr/bin/test_samples/xmls/AppWidgetHandlerTest.dbox1_app_widget_box_content_touch_effect_not_bool/config.xml


