[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 43aa6dd09826 started "build perl-PerlIO-gzip.spec" at Mon Dec 16 13:54:58 UTC 2024. [ 0s] [ 0s] Building perl-PerlIO-gzip for project 'Tizen-Base-Toolchain' repository 'standard' arch 'armv7hl' srcmd5 '9a29617bd5b652591c26a8f086ebfab4' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21/.build-srcdir/perl-PerlIO-gzip.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21/.build-srcdir/perl-PerlIO-gzip.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/21/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21/.build-srcdir/perl-PerlIO-gzip.spec build ... [ 14s] registering binfmt handlers for cross build [ 17s] cycle: nss -> libsoftokn3 [ 17s] breaking dependency nss -> libsoftokn3 [ 18s] [1/42] preinstalling libmagic-data... [ 18s] [2/42] preinstalling libncurses... [ 18s] [3/42] preinstalling setup... [ 19s] [4/42] preinstalling filesystem... [ 19s] [5/42] preinstalling glibc... [ 20s] [6/42] preinstalling libgcc... [ 20s] [7/42] preinstalling bash... [ 20s] [8/42] preinstalling diffutils... [ 21s] [9/42] preinstalling grep... [ 21s] [10/42] preinstalling libattr... [ 21s] [11/42] preinstalling libblkid... [ 21s] [12/42] preinstalling libbz2... [ 22s] [13/42] preinstalling libcap... [ 22s] [14/42] preinstalling libfreebl3... [ 22s] [15/42] preinstalling liblua... [ 22s] [16/42] preinstalling liblzma... [ 23s] [17/42] preinstalling libpopt... [ 23s] [18/42] preinstalling libreadline... [ 23s] [19/42] preinstalling libsmack... [ 23s] [20/42] preinstalling libsqlite... [ 24s] [21/42] preinstalling libuuid... [ 24s] [22/42] preinstalling libxcrypt... [ 24s] [23/42] preinstalling libzstd1... [ 25s] [24/42] preinstalling nspr... [ 25s] [25/42] preinstalling sed... [ 25s] [26/42] preinstalling zlib... [ 25s] [27/42] preinstalling qemu-accel-x86_64-armv7hl... [ 54s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 61s] [29/42] preinstalling coreutils... [ 62s] [30/42] preinstalling libacl... [ 62s] [31/42] preinstalling libelf... [ 62s] [32/42] preinstalling libmount... [ 63s] [33/42] preinstalling smack... [ 63s] [34/42] preinstalling bzip2... [ 63s] [35/42] preinstalling libmagic... [ 63s] [36/42] preinstalling libxml2... [ 63s] [37/42] preinstalling tar... [ 64s] [38/42] preinstalling util-linux... [ 64s] [39/42] preinstalling util-linux-su... [ 64s] [40/42] preinstalling nss... [ 65s] [41/42] preinstalling libsoftokn3... [ 65s] [42/42] preinstalling rpm... [ 67s] running qemu-linux-user-x86_64-cross postinstall script [ 69s] running qemu-accel-x86_64-armv7hl postinstall script [ 69s] mv: cannot stat `/usr/lib/gcc/armv7hl-tizen-linux-gnueabihf/14.2.0/liblto_plugin.so': No such file or directory [ 69s] running setup postinstall script [ 69s] chroot: failed to run command '': No such file or directory [ 69s] initializing rpm db... [ 70s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 70s] breaking dependency libxcrypt-devel -> glibc-devel [ 70s] cycle: libsoftokn3 -> nss [ 70s] breaking dependency nss -> libsoftokn3 [ 70s] done [ 70s] querying package ids... [ 74s] [1/99] cumulate libmagic-data-5.45-1.18 [ 74s] [2/99] cumulate setup-0.9-1.11 [ 74s] [3/99] cumulate filesystem-3.1-1.1 [ 74s] [4/99] cumulate glibc-2.40-1.1 [ 74s] [5/99] cumulate libatomic-14.2.0-1.3 [ 74s] [6/99] cumulate libgcc-14.2.0-1.3 [ 74s] [7/99] cumulate bash-3.2.57-1.3 [ 74s] [8/99] cumulate cpio-2.8-1.4 [ 74s] [9/99] cumulate diffutils-3.10-1.3 [ 74s] [10/99] cumulate findutils-4.3.8-1.18 [ 74s] [11/99] cumulate gdbm-1.8.3-1.28 [ 74s] [12/99] cumulate hostname-3.23-1.4 [ 74s] [13/99] cumulate libattr-2.5.1-1.18 [ 74s] [14/99] cumulate libblkid-2.39.3-1.16 [ 74s] [15/99] cumulate libbz2-1.0.8-1.19 [ 74s] [16/99] cumulate libcap-2.69-1.19 [ 74s] [17/99] cumulate libfreebl3-3.98-1.28 [ 74s] [18/99] cumulate libgfortran-14.2.0-1.3 [ 74s] [19/99] cumulate libgomp-14.2.0-1.3 [ 74s] [20/99] cumulate libitm-14.2.0-1.3 [ 74s] [21/99] cumulate libltdl-2.4.7-1.28 [ 74s] [22/99] cumulate liblua-5.1.5-1.18 [ 74s] [23/99] cumulate liblzma-5.4.5-1.28 [ 74s] [24/99] cumulate libopenssl3-3.0.13-1.28 [ 74s] [25/99] cumulate libpcre-8.45-1.18 [ 74s] [26/99] cumulate libpopt-1.16-1.18 [ 74s] [27/99] cumulate libsmack-1.3.1-1.18 [ 74s] [28/99] cumulate libsmartcols-2.39.3-1.16 [ 74s] [29/99] cumulate libsqlite-3.44.0-1.19 [ 74s] [30/99] cumulate libstdc++-14.2.0-1.3 [ 74s] [31/99] cumulate libuuid-2.39.3-1.16 [ 74s] [32/99] cumulate libxcrypt-4.4.36-1.25 [ 74s] [33/99] cumulate libzstd1-1.5.5-1.21 [ 74s] [34/99] cumulate m4-1.4.19-1.3 [ 74s] [35/99] cumulate net-tools-2.0_20121208git-1.18 [ 74s] [36/99] cumulate nspr-4.35-1.18 [ 74s] [37/99] cumulate patch-2.7.6-1.18 [ 74s] [38/99] cumulate pkg-config-0.29.2-1.19 [ 74s] [39/99] cumulate sed-4.1c-1.18 [ 74s] [40/99] cumulate update-alternatives-1.22.2-1.2 [ 74s] [41/99] cumulate which-2.17-1.3 [ 74s] [42/99] cumulate zlib-1.3-1.19 [ 74s] [43/99] cumulate build-compare-2023.06.18-1.12 [ 74s] [44/99] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 74s] [45/99] cumulate libstdc++-devel-14.2.0-1.3 [ 74s] [46/99] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-23.7 [ 74s] [47/99] cumulate cpp-14.2.0-1.3 [ 74s] [48/99] cumulate gcc-c++-14.2.0-1.3 [ 74s] [49/99] cumulate binutils-libs-2.43-1.18 [ 74s] [50/99] cumulate coreutils-6.9-14.10 [ 74s] [51/99] cumulate gawk-3.1.5-1.3 [ 74s] [52/99] cumulate grep-2.5.2-1.18 [ 74s] [53/99] cumulate libacl-2.3.2-1.19 [ 74s] [54/99] cumulate libcc1-14.2.0-1.3 [ 74s] [55/99] cumulate libelf-0.189-1.28 [ 74s] [56/99] cumulate libmount-2.39.3-1.16 [ 74s] [57/99] cumulate libubsan-14.2.0-1.3 [ 74s] [58/99] cumulate make-4.4-1.18 [ 74s] [59/99] cumulate nss-certs-3.98-1.28 [ 74s] [60/99] cumulate smack-1.3.1-1.18 [ 74s] [61/99] cumulate bzip2-1.0.8-1.19 [ 74s] [62/99] cumulate libfdisk-2.39.3-1.16 [ 74s] [63/99] cumulate libmagic-5.45-1.18 [ 74s] [64/99] cumulate libxml2-2.12.5-1.19 [ 74s] [65/99] cumulate xz-5.4.5-1.28 [ 74s] [66/99] cumulate perl-5.38.0-1.19 [ 74s] [67/99] cumulate build-mkbaselibs-20120927-1.1 [ 74s] [68/99] cumulate linux-glibc-devel-6.6-1.24 [ 74s] [69/99] cumulate terminfo-base-full-6.4-1.28 [ 74s] [70/99] cumulate autoconf-2.71-1.26 [ 74s] [71/99] cumulate file-5.45-1.18 [ 74s] [72/99] cumulate glibc-locale-2.40-1.1 [ 74s] [73/99] cumulate tar-1.17-1.2 [ 74s] [74/99] cumulate binutils-2.43-1.18 [ 74s] [75/99] cumulate gzip-1.3.12-1.18 [ 74s] [76/99] cumulate pam-1.1.6-1.19 [ 74s] [77/99] cumulate tzdata-2023c-1.2 [ 74s] [78/99] cumulate libdw-0.189-1.28 [ 74s] [79/99] cumulate libarchive-3.7.2-1.27 [ 74s] [80/99] cumulate gcc-14.2.0-1.3 [ 74s] [81/99] cumulate qemu-accel-x86_64-armv7hl-0.4-3.12 [ 74s] [82/99] cumulate automake-1.16.5-1.26 [ 74s] [83/99] cumulate libasm-0.189-1.28 [ 74s] [84/99] cumulate libncurses6-6.4-1.28 [ 74s] [85/99] cumulate build-20120927-1.1 [ 74s] [86/99] cumulate libncurses-6.4-1.28 [ 74s] [87/99] cumulate less-643-1.3 [ 74s] [88/99] cumulate libreadline-5.2-1.19 [ 74s] [89/99] cumulate libtool-2.4.7-1.28 [ 74s] [90/99] cumulate elfutils-0.189-1.28 [ 74s] [91/99] cumulate util-linux-2.39.3-1.16 [ 74s] [92/99] cumulate util-linux-su-2.39.3-1.16 [ 74s] [93/99] cumulate libxcrypt-devel-4.4.36-1.25 [ 74s] [94/99] cumulate nss-3.98-1.28 [ 74s] [95/99] cumulate glibc-devel-2.40-1.1 [ 74s] [96/99] cumulate libsoftokn3-3.98-1.28 [ 74s] [97/99] cumulate rpm-4.14.1.1-3.17 [ 74s] [98/99] cumulate zlib-devel-1.3-1.19 [ 74s] [99/99] cumulate rpm-build-4.14.1.1-3.17 [ 74s] now installing cumulated packages [ 77s] Preparing... ######################################## [ 77s] Updating / installing... [ 77s] setup-0.9-1.11 ######################################## [ 77s] filesystem-3.1-1.1 ######################################## [ 77s] libmagic-data-5.45-1.18 ######################################## [ 77s] glibc-2.40-1.1 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 77s] ######################################## [ 78s] libgcc-14.2.0-1.3 ######################################## [ 78s] bash-3.2.57-1.3 ######################################## [ 78s] zlib-1.3-1.19 ######################################## [ 79s] coreutils-6.9-14.10 ######################################## [ 80s] libstdc++-14.2.0-1.3 ######################################## [ 80s] libbz2-1.0.8-1.19 ######################################## [ 80s] liblzma-5.4.5-1.28 ######################################## [ 81s] libelf-0.189-1.28 ######################################## [ 81s] libdw-0.189-1.28 ######################################## [ 82s] libxcrypt-4.4.36-1.25 ######################################## [ 82s] libmagic-5.45-1.18 ######################################## [ 83s] libblkid-2.39.3-1.16 ######################################## [ 83s] nspr-4.35-1.18 ######################################## [ 83s] pam-1.1.6-1.19 ######################################## [ 84s] libcap-2.69-1.19 ######################################## [ 85s] libfreebl3-3.98-1.28 ######################################## [ 85s] liblua-5.1.5-1.18 ######################################## [ 85s] libpopt-1.16-1.18 ######################################## [ 86s] libuuid-2.39.3-1.16 ######################################## [ 86s] libzstd1-1.5.5-1.21 ######################################## [ 87s] pkg-config-0.29.2-1.19 ######################################## [ 87s] linux-glibc-devel-6.6-1.24 ######################################## [ 88s] terminfo-base-full-6.4-1.28 ######################################## [ 88s] libncurses6-6.4-1.28 ######################################## [ 89s] libreadline-5.2-1.19 ######################################## [ 89s] libfdisk-2.39.3-1.16 ######################################## [ 90s] nss-certs-3.98-1.28 ######################################## [ 90s] libmount-2.39.3-1.16 ######################################## [ 90s] libasm-0.189-1.28 ######################################## [ 90s] libxml2-2.12.5-1.19 ######################################## [ 91s] xz-5.4.5-1.28 ######################################## [ 91s] bzip2-1.0.8-1.19 ######################################## [ 91s] libcc1-14.2.0-1.3 ######################################## [ 91s] libubsan-14.2.0-1.3 ######################################## [ 92s] gzip-1.3.12-1.18 ######################################## [ 92s] binutils-libs-2.43-1.18 ######################################## [ 93s] binutils-2.43-1.18 ######################################## [ 93s] make-4.4-1.18 ######################################## [ 94s] findutils-4.3.8-1.18 ######################################## [ 94s] gdbm-1.8.3-1.28 ######################################## [ 101s] perl-5.38.0-1.19 ######################################## [ 101s] build-mkbaselibs-20120927-1.1 ######################################## [ 101s] libattr-2.5.1-1.18 ######################################## [ 102s] libacl-2.3.2-1.19 ######################################## [ 102s] tar-1.17-1.2 ######################################## [ 102s] libgfortran-14.2.0-1.3 ######################################## [ 103s] libgomp-14.2.0-1.3 ######################################## [ 103s] libitm-14.2.0-1.3 ######################################## [ 103s] libltdl-2.4.7-1.28 ######################################## [ 104s] libopenssl3-3.0.13-1.28 ######################################## [ 105s] libarchive-3.7.2-1.27 ######################################## [ 105s] libpcre-8.45-1.18 ######################################## [ 105s] libsmack-1.3.1-1.18 ######################################## [ 106s] libsmartcols-2.39.3-1.16 ######################################## [ 107s] libsqlite-3.44.0-1.19 ######################################## [ 107s] libsoftokn3-3.98-1.28 ######################################## [ 108s] nss-3.98-1.28 ######################################## [ 109s] rpm-4.14.1.1-3.17 ######################################## [ 110s] m4-1.4.19-1.3 ######################################## [ 110s] autoconf-2.71-1.26 ######################################## [ 111s] automake-1.16.5-1.26 ######################################## [ 112s] patch-2.7.6-1.18 ######################################## [ 112s] sed-4.1c-1.18 ######################################## [ 112s] util-linux-2.39.3-1.16 ######################################## [ 112s] libatomic-14.2.0-1.3 ######################################## [ 113s] libtool-2.4.7-1.28 ######################################## [ 113s] build-20120927-1.1 ######################################## [ 113s] libncurses-6.4-1.28 ######################################## [ 114s] libstdc++-devel-14.2.0-1.3 ######################################## [ 114s] build-compare-2023.06.18-1.12 ######################################## [ 114s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 122s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 128s] gcc-14.2.0-1.3 ######################################## [ 128s] libxcrypt-devel-4.4.36-1.25 ######################################## [ 128s] glibc-devel-2.40-1.1 ######################################## [ 129s] zlib-devel-1.3-1.19 ######################################## [ 157s] qemu-accel-x86_64-armv7hl-0.4-3.12 ######################################## [ 159s] rpm-build-4.14.1.1-3.17 ######################################## [ 159s] util-linux-su-2.39.3-1.16 ######################################## [ 159s] smack-1.3.1-1.18 ######################################## [ 159s] grep-2.5.2-1.18 ######################################## [ 159s] elfutils-0.189-1.28 ######################################## [ 159s] less-643-1.3 ######################################## [ 159s] file-5.45-1.18 ######################################## [ 160s] glibc-locale-2.40-1.1 ######################################## [ 161s] tzdata-2023c-1.2 ######################################## [ 165s] cpp-14.2.0-1.3 ######################################## [ 169s] gcc-c++-14.2.0-1.3 ######################################## [ 169s] gawk-3.1.5-1.3 ######################################## [ 169s] cpio-2.8-1.4 ######################################## [ 169s] diffutils-3.10-1.3 ######################################## [ 169s] hostname-3.23-1.4 ######################################## [ 169s] net-tools-2.0_20121208git-1.18 ######################################## [ 169s] update-alternatives-1.22.2-1.2 ######################################## [ 169s] which-2.17-1.3 ######################################## [ 171s] now finalizing build dir... [ 175s] ----------------------------------------------------------------- [ 175s] I have the following modifications for perl-PerlIO-gzip.spec: [ 175s] 4c4 [ 175s] < Release: 1 [ 175s] --- [ 175s] > Release: 1.3 [ 177s] build target is armv7hl-tizen-linux [ 177s] ----------------------------------------------------------------- [ 177s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 177s] ----------------------------------------------------------------- [ 177s] ----------------------------------------------------------------- [ 178s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/9a29617bd5b652591c26a8f086ebfab4-perl-PerlIO-gzip' /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 191s] Building target platforms: armv7hl-tizen-linux [ 191s] Building for target armv7hl-tizen-linux [ 191s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.UZm17O [ 191s] + umask 022 [ 191s] + cd /home/abuild/rpmbuild/BUILD [ 191s] + cd /home/abuild/rpmbuild/BUILD [ 191s] + rm -rf perl-PerlIO-gzip-0.20 [ 191s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.20.tar.gz [ 191s] + /bin/tar -xof - [ 191s] + STATUS=0 [ 191s] + '[' 0 -ne 0 ']' [ 191s] + cd perl-PerlIO-gzip-0.20 [ 191s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 191s] + exit 0 [ 191s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.O8sEBG [ 191s] + umask 022 [ 191s] + cd /home/abuild/rpmbuild/BUILD [ 191s] + cd perl-PerlIO-gzip-0.20 [ 191s] + ref=/usr/lib/rpm [ 191s] + mints=0 [ 191s] + case $(uname -m) in [ 191s] ++ uname -m [ 192s] + for s in guess sub [ 192s] ++ find -maxdepth 8 -name config.guess [ 192s] + for s in guess sub [ 192s] ++ find -maxdepth 8 -name config.sub [ 192s] + LANG=C [ 192s] + export LANG [ 192s] + unset DISPLAY [ 192s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 192s] + export CFLAGS [ 192s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 192s] + export CXXFLAGS [ 192s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 192s] + export FFLAGS [ 192s] + LDFLAGS= [ 192s] + export LDFLAGS [ 192s] + perl Makefile.PL [ 195s] Checking if your kit is complete... [ 195s] Looks good [ 198s] Generating a Unix-style Makefile [ 198s] Writing Makefile for PerlIO::gzip [ 198s] Writing MYMETA.yml and MYMETA.json [ 198s] + make [ 208s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 208s] Running Mkbootstrap for gzip () [ 210s] chmod 644 "gzip.bs" [ 210s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 211s] "/usr/bin/perl" "/usr/lib/perl5/5.38.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.38.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 213s] mv gzip.xsc gzip.c [ 213s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -Wall -pipe -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE" gzip.c [ 213s] In file included from gzip.xs:13: [ 213s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined [ 213s] 1059 | #define PERL_USE_SAFE_PUTENV [ 213s] | ^~~~~~~~~~~~~~~~~~~~ [ 213s] : note: this is the location of the previous definition [ 214s] In file included from /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:6227: [ 214s] gzip.xs: In function 'PerlIOGzip_getarg': [ 214s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/embed.h:437:49: warning: 'mode' may be used uninitialized [-Wmaybe-uninitialized] [ 214s] 437 | # define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 214s] | ^~~~~~~~~~~~~~~~~~~~~~~ [ 214s] gzip.xs:697:8: note: in expansion of macro 'newSVpv' [ 214s] 697 | sv = newSVpv (mode, 4); [ 214s] | ^~~~~~~ [ 214s] gzip.xs:675:24: note: 'mode' was declared here [ 214s] 675 | register const char *mode; [ 214s] | ^~~~ [ 215s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 215s] LD_RUN_PATH="/usr/lib" cc -shared -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 215s] -lz \ [ 215s] [ 216s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 218s] Manifying 1 pod document [ 218s] + exit 0 [ 218s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.SzOEmJ [ 218s] + umask 022 [ 218s] + cd /home/abuild/rpmbuild/BUILD [ 218s] + cd perl-PerlIO-gzip-0.20 [ 218s] + LANG=C [ 218s] + export LANG [ 218s] + unset DISPLAY [ 218s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm [ 218s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm [ 219s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm [ 219s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm install_vendor [ 219s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 222s] Manifying 1 pod document [ 223s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 223s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 223s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 223s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/share/man/man3/PerlIO::gzip.3 [ 224s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod [ 225s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/share/info [ 225s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/share/doc/packages [ 225s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/share/doc/perl-PerlIO-gzip [ 225s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/share/doc/perl-PerlIO-gzip-0.20 [ 225s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/share/gtk-doc [ 225s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/share/doc [ 225s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/share/man [ 225s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm -regex '.*/man/man./.*.[0-9]' [ 225s] + xargs rm -f -- [ 225s] + xargs rm -f -- [ 225s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm -regex '.*/man/../man./.*.[0-9]' [ 226s] + xargs rm -f -- [ 226s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm -regex '.*/man/man./.*.[0-9]pm' [ 226s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto [ 226s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 226s] + xargs -0 -r rm [ 226s] + '[' armv7hl == noarch ']' [ 226s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod [ 226s] + FILES=perl-PerlIO-gzip.files [ 226s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f [ 226s] + RES= [ 226s] + '[' -n '' ']' [ 226s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ [ 226s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ -type d [ 226s] ++ sort [ 226s] + for dir in '`find ${base_dir} -type d | sort`' [ 226s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 226s] + continue [ 226s] + for dir in '`find ${base_dir} -type d | sort`' [ 226s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 226s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 226s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi [ 226s] + el=armv7l-linux-thread-multi [ 226s] + all_dir=(${all_dir[@]} $el) [ 226s] + for dir in '`find ${base_dir} -type d | sort`' [ 226s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 226s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 226s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO [ 226s] + el=armv7l-linux-thread-multi/PerlIO [ 226s] + all_dir=(${all_dir[@]} $el) [ 226s] + for dir in '`find ${base_dir} -type d | sort`' [ 226s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 226s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto [ 226s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 226s] + el=armv7l-linux-thread-multi/auto [ 226s] + all_dir=(${all_dir[@]} $el) [ 226s] + for dir in '`find ${base_dir} -type d | sort`' [ 226s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 226s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO [ 226s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 226s] + el=armv7l-linux-thread-multi/auto/PerlIO [ 226s] + all_dir=(${all_dir[@]} $el) [ 226s] + for dir in '`find ${base_dir} -type d | sort`' [ 226s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 226s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 226s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 226s] + el=armv7l-linux-thread-multi/auto/PerlIO/gzip [ 226s] + all_dir=(${all_dir[@]} $el) [ 226s] + for i in '${all_dir[@]}' [ 226s] + '[' armv7l-linux-thread-multi = auto ']' [ 226s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 226s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi ']' [ 226s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 226s] + RES= [ 226s] + '[' -n '' ']' [ 226s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi [ 226s] + /bin/cat [ 226s] + for i in '${all_dir[@]}' [ 226s] + '[' armv7l-linux-thread-multi/PerlIO = auto ']' [ 226s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 226s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO ']' [ 226s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 226s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 226s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO/gzip.pm ']' [ 226s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO [ 226s] + /bin/cat [ 226s] + for file in '$RES' [ 226s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 226s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 226s] + /bin/cat [ 226s] + for i in '${all_dir[@]}' [ 226s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 226s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 226s] + continue [ 226s] + for i in '${all_dir[@]}' [ 226s] + '[' armv7l-linux-thread-multi/auto/PerlIO = auto ']' [ 226s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 226s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO ']' [ 226s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 226s] + RES= [ 226s] + '[' -n '' ']' [ 226s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO [ 226s] + /bin/cat [ 226s] + for i in '${all_dir[@]}' [ 226s] + '[' armv7l-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 226s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 226s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip ']' [ 226s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 226s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 226s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 226s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 226s] + /bin/cat [ 226s] + for file in '$RES' [ 226s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 227s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 227s] + /bin/cat [ 227s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/share/man ']' [ 227s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 227s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/bin ']' [ 227s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.20-1.3 --unique-debug-src-base perl-PerlIO-gzip-0.20-1.3.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 228s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 228s] 158 blocks [ 229s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debuginfo.manifest [ 229s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debugsource.manifest [ 229s] + /usr/lib/rpm/check-buildroot [ 229s] + /usr/lib/rpm//brp-compress [ 230s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 230s] + /usr/lib/rpm/brp-python-hardlink [ 230s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm [ 230s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/isu.list [ 231s] ~/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 231s] ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 231s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 257s] Processing files: perl-PerlIO-gzip-0.20-1.3.armv7hl [ 257s] Provides: perl(PerlIO::gzip) = 0.20 perl-PerlIO-gzip = 0.20-1.3 perl-PerlIO-gzip(armv7hl-32) = 0.20-1.3 [ 257s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 257s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 rtld(GNU_HASH) [ 257s] Processing files: perl-PerlIO-gzip-debugsource-0.20-1.3.armv7hl [ 257s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 257s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 257s] [ 257s] Provides: perl-PerlIO-gzip-debugsource = 0.20-1.3 perl-PerlIO-gzip-debugsource(armv7hl-32) = 0.20-1.3 [ 257s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 257s] Processing files: perl-PerlIO-gzip-debuginfo-0.20-1.3.armv7hl [ 257s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 257s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 257s] [ 257s] Provides: perl-PerlIO-gzip-debuginfo = 0.20-1.3 perl-PerlIO-gzip-debuginfo(armv7hl-32) = 0.20-1.3 [ 257s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 257s] Recommends: perl-PerlIO-gzip-debugsource(armv7hl-32) = 0.20-1.3 [ 257s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm [ 258s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.20-1.3.src.rpm [ 259s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-0.20-1.3.armv7hl.rpm [ 259s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debugsource-0.20-1.3.armv7hl.rpm [ 259s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debuginfo-0.20-1.3.armv7hl.rpm [ 259s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.SreVYD [ 260s] + umask 022 [ 260s] + cd /home/abuild/rpmbuild/BUILD [ 260s] + cd perl-PerlIO-gzip-0.20 [ 260s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm [ 260s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.3.arm [ 260s] + exit 0 [ 260s] ... checking for files with abuild user/group [ 261s] ... creating baselibs [ 264s] ... comparing built packages with the former built [ 264s] /usr/lib/build/pkg-diff.sh [ 265s] compare /.build.oldpackages/perl-PerlIO-gzip-0.20-1.2.src.rpm /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.20-1.3.src.rpm [ 266s] This is not a prerelease project. Compare the project name. [ 266s] comparing disturl_distribution [ 267s] comparing the rpm tags of perl-PerlIO-gzip [ 267s] --- old-rpm-tags [ 267s] +++ new-rpm-tags [ 267s] @@ -80 +80 @@ [ 267s] -perl-PerlIO-gzip.spec f4abefab59ab10606a2039cc62c3b4e68fb78832e0c5094152cc6386ccf97564 32 [ 267s] +perl-PerlIO-gzip.spec 8aad93930d90200a77cef17c345fe0d540bed1c243b707642108bfda9a79edc5 32 [ 267s] comparing rpmtags [ 267s] comparing RELEASE [ 267s] comparing PROVIDES [ 267s] comparing scripts [ 267s] comparing filelist [ 268s] comparing file checksum [ 269s] compare /.build.oldpackages/perl-PerlIO-gzip-0.20-1.2.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-0.20-1.3.armv7hl.rpm [ 270s] Comparing perl-PerlIO-gzip-0.20-1.2.armv7hl.rpm to perl-PerlIO-gzip-0.20-1.3.armv7hl.rpm [ 271s] This is not a prerelease project. Compare the project name. [ 271s] comparing disturl_distribution [ 272s] comparing the rpm tags of perl-PerlIO-gzip [ 272s] --- old-rpm-tags [ 272s] +++ new-rpm-tags [ 272s] @@ -101 +101 @@ [ 272s] -/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so 961cc700fe3b7a1daada8b45da09bf8f049090b4ada82c166769d198fdf2138c 0 [ 272s] +/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so 4a386a9e2d714feef21367ac1a103d86732abbf856365b3be0a1c44c613ab82a 0 [ 272s] @@ -107 +107 @@ [ 272s] -perl-PerlIO-gzip-0.20-1.2.src.rpm [ 272s] +perl-PerlIO-gzip-0.20-1.3.src.rpm [ 272s] comparing rpmtags [ 272s] comparing RELEASE [ 272s] comparing PROVIDES [ 272s] comparing scripts [ 272s] comparing filelist [ 272s] comparing file checksum [ 272s] creating rename script [ 273s] RPM file checksum differs. [ 273s] Extracting packages [ 273s] /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so differs in ELF sections [ 273s] --- old /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so (objdump) [ 273s] +++ new /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so (objdump) [ 273s] @@ -525,15 +525,15 @@ [ 273s] Contents of section .fini: [ 273s] 20f8 08402de9 0880bde8 .@-..... [ 273s] Contents of section .rodata: [ 273s] - 2100 3e000000 41000000 0c000000 41000000 >...A.......A... [ 273s] - 2110 11000000 41000000 27000000 41000000 ....A...'...A... [ 273s] - 2120 36000000 41000000 03000000 41000000 6...A.......A... [ 273s] - 2130 06000000 41000000 15000000 41000000 ....A.......A... [ 273s] - 2140 0f000000 41000000 0e000000 41000000 ....A.......A... [ 273s] - 2150 26000000 41000000 13000000 41000000 &...A.......A... [ 273s] - 2160 29000000 41000000 02000000 41000000 )...A.......A... [ 273s] - 2170 19000000 41000000 0a000000 41000000 ....A.......A... [ 273s] - 2180 0b000000 41000000 00000000 00000000 ....A........... [ 273s] + 2100 15000000 2e000000 1f000000 2e000000 ................ [ 273s] + 2110 31000000 2e000000 24000000 2e000000 1.......$....... [ 273s] + 2120 29000000 2e000000 27000000 2e000000 ).......'....... [ 273s] + 2130 05000000 2e000000 30000000 2e000000 ........0....... [ 273s] + 2140 1e000000 2e000000 2f000000 2e000000 ......../....... [ 273s] + 2150 2d000000 2e000000 04000000 2e000000 -............... [ 273s] + 2160 1b000000 2e000000 28000000 2e000000 ........(....... [ 273s] + 2170 06000000 2e000000 07000000 2e000000 ................ [ 273s] + 2180 0c000000 2e000000 00000000 00000000 ................ [ 273s] 2190 6175746f 00000000 6e6f6e65 00000000 auto....none.... [ 273s] 21a0 2c617574 6f706f70 00000000 5065726c ,autopop....Perl [ 273s] 21b0 494f477a 69705f70 6f707065 6420636f IOGzip_popped co [ 273s] @@ -552,15 +552,15 @@ [ 273s] 2280 65636f67 6e697365 64206172 67756d65 ecognised argume [ 273s] 2290 6e742022 252e2a73 22000000 76352e33 nt "%.*s"...v5.3 [ 273s] 22a0 382e3000 677a6970 2e630000 302e3230 8.0.gzip.c..0.20 [ 273s] - 22b0 00000000 3e000000 41000000 0c000000 ....>...A....... [ 273s] - 22c0 41000000 11000000 41000000 27000000 A.......A...'... [ 273s] - 22d0 41000000 36000000 41000000 03000000 A...6...A....... [ 273s] - 22e0 41000000 06000000 41000000 15000000 A.......A....... [ 273s] - 22f0 41000000 0f000000 41000000 0e000000 A.......A....... [ 273s] - 2300 41000000 26000000 41000000 13000000 A...&...A....... [ 273s] - 2310 41000000 29000000 41000000 02000000 A...)...A....... [ 273s] - 2320 41000000 19000000 41000000 0a000000 A.......A....... [ 273s] - 2330 41000000 0b000000 41000000 00000000 A.......A....... [ 273s] + 22b0 00000000 15000000 2e000000 1f000000 ................ [ 273s] + 22c0 2e000000 31000000 2e000000 24000000 ....1.......$... [ 273s] + 22d0 2e000000 29000000 2e000000 27000000 ....).......'... [ 273s] + 22e0 2e000000 05000000 2e000000 30000000 ............0... [ 273s] + 22f0 2e000000 1e000000 2e000000 2f000000 ............/... [ 273s] + 2300 2e000000 2d000000 2e000000 04000000 ....-........... [ 273s] + 2310 2e000000 1b000000 2e000000 28000000 ............(... [ 273s] + 2320 2e000000 06000000 2e000000 07000000 ................ [ 273s] + 2330 2e000000 0c000000 2e000000 00000000 ................ [ 273s] 2340 00000000 .... [ 273s] Contents of section .ARM.extab: [ 273s] 2344 08b10181 b0b00084 00000000 ............ [ 274s] compare /.build.oldpackages/perl-PerlIO-gzip-debuginfo-0.20-1.2.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debuginfo-0.20-1.3.armv7hl.rpm [ 274s] skipping -debuginfo package [ 274s] compare /.build.oldpackages/perl-PerlIO-gzip-debugsource-0.20-1.2.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debugsource-0.20-1.3.armv7hl.rpm [ 275s] Comparing perl-PerlIO-gzip-debugsource-0.20-1.2.armv7hl.rpm to perl-PerlIO-gzip-debugsource-0.20-1.3.armv7hl.rpm [ 276s] This is not a prerelease project. Compare the project name. [ 276s] comparing disturl_distribution [ 276s] comparing the rpm tags of perl-PerlIO-gzip-debugsource [ 277s] --- old-rpm-tags [ 277s] +++ new-rpm-tags [ 277s] @@ -90 +90 @@ [ 277s] -perl-PerlIO-gzip-0.20-1.2.src.rpm [ 277s] +perl-PerlIO-gzip-0.20-1.3.src.rpm [ 277s] comparing rpmtags [ 277s] comparing RELEASE [ 277s] comparing PROVIDES [ 277s] comparing scripts [ 277s] comparing filelist [ 277s] comparing file checksum [ 277s] creating rename script [ 278s] RPM meta information is identical [ 278s] No rpmlint.log available [ 278s] [ 278s] 43aa6dd09826 finished "build perl-PerlIO-gzip.spec" at Mon Dec 16 13:59:36 UTC 2024. [ 278s]