[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.10 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 1s] [ 1s] 8aea0a10cbff started "build python-ply.spec" at Fri Nov 29 17:35:58 UTC 2024. [ 1s] [ 1s] Building python-ply for project 'Tizen-Base' repository 'standard' arch 'armv7hl' srcmd5 'cd8db107c26b20aab04e6e244f77a7f7' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.10/.build-srcdir/python-ply.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.10/.build-srcdir/python-ply.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/10/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.10/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.10/.build-srcdir/python-ply.spec build ... [ 1s] registering binfmt handlers for cross build [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/42] preinstalling libmagic-data... [ 3s] [2/42] preinstalling libncurses... [ 3s] [3/42] preinstalling setup... [ 3s] [4/42] preinstalling filesystem... [ 3s] [5/42] preinstalling glibc... [ 3s] [6/42] preinstalling libgcc... [ 4s] [7/42] preinstalling bash... [ 4s] [8/42] preinstalling diffutils... [ 4s] [9/42] preinstalling grep... [ 4s] [10/42] preinstalling libattr... [ 4s] [11/42] preinstalling libblkid... [ 4s] [12/42] preinstalling libbz2... [ 4s] [13/42] preinstalling libcap... [ 5s] [14/42] preinstalling libfreebl3... [ 5s] [15/42] preinstalling liblua... [ 5s] [16/42] preinstalling liblzma... [ 5s] [17/42] preinstalling libpopt... [ 5s] [18/42] preinstalling libreadline... [ 5s] [19/42] preinstalling libsmack... [ 5s] [20/42] preinstalling libsqlite... [ 5s] [21/42] preinstalling libuuid... [ 5s] [22/42] preinstalling libxcrypt... [ 5s] [23/42] preinstalling libzstd1... [ 6s] [24/42] preinstalling nspr... [ 6s] [25/42] preinstalling sed... [ 6s] [26/42] preinstalling zlib... [ 6s] [27/42] preinstalling qemu-accel-x86_64-armv7hl... [ 15s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 18s] [29/42] preinstalling coreutils... [ 18s] [30/42] preinstalling libacl... [ 19s] [31/42] preinstalling libelf... [ 19s] [32/42] preinstalling libmount... [ 19s] [33/42] preinstalling smack... [ 19s] [34/42] preinstalling bzip2... [ 19s] [35/42] preinstalling libmagic... [ 19s] [36/42] preinstalling libxml2... [ 19s] [37/42] preinstalling tar... [ 19s] [38/42] preinstalling util-linux... [ 19s] [39/42] preinstalling util-linux-su... [ 19s] [40/42] preinstalling nss... [ 19s] [41/42] preinstalling libsoftokn3... [ 19s] [42/42] preinstalling rpm... [ 20s] running qemu-linux-user-x86_64-cross postinstall script [ 20s] running qemu-accel-x86_64-armv7hl postinstall script [ 20s] mv: cannot stat `/usr/lib/gcc/armv7hl-tizen-linux-gnueabihf/14.1.0/liblto_plugin.so': No such file or directory [ 20s] running setup postinstall script [ 20s] chroot: failed to run command '': No such file or directory [ 20s] initializing rpm db... [ 21s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 21s] breaking dependency libxcrypt-devel -> glibc-devel [ 21s] cycle: libsoftokn3 -> nss [ 21s] breaking dependency nss -> libsoftokn3 [ 21s] done [ 21s] querying package ids... [ 22s] [1/109] cumulate libmagic-data-5.45-1.3 [ 22s] [2/109] cumulate setup-0.9-1.2 [ 22s] [3/109] cumulate filesystem-3.1-1.1 [ 22s] [4/109] cumulate glibc-2.39-1.6 [ 22s] [5/109] cumulate libatomic-14.1.0-1.6 [ 22s] [6/109] cumulate libgcc-14.1.0-1.6 [ 22s] [7/109] cumulate bash-3.2.57-1.1 [ 22s] [8/109] cumulate cpio-2.8-1.1 [ 22s] [9/109] cumulate diffutils-3.10-1.1 [ 22s] [10/109] cumulate fdupes-2.2.1-1.4 [ 22s] [11/109] cumulate findutils-4.3.8-1.3 [ 22s] [12/109] cumulate gdbm-1.8.3-1.6 [ 22s] [13/109] cumulate hostname-3.23-1.1 [ 22s] [14/109] cumulate libattr-2.5.1-1.3 [ 22s] [15/109] cumulate libblkid-2.39.3-1.3 [ 22s] [16/109] cumulate libbz2-1.0.8-1.4 [ 22s] [17/109] cumulate libcap-2.69-1.5 [ 22s] [18/109] cumulate libfreebl3-3.98-1.6 [ 22s] [19/109] cumulate libgfortran-14.1.0-1.6 [ 22s] [20/109] cumulate libgomp-14.1.0-1.6 [ 22s] [21/109] cumulate libitm-14.1.0-1.6 [ 22s] [22/109] cumulate libltdl-2.4.7-1.6 [ 22s] [23/109] cumulate liblua-5.1.5-1.3 [ 22s] [24/109] cumulate liblzma-5.4.5-1.6 [ 22s] [25/109] cumulate libopenssl11-1.1.1w-1.5 [ 22s] [26/109] cumulate libopenssl3-3.0.13-1.6 [ 22s] [27/109] cumulate libpcre-8.45-1.3 [ 22s] [28/109] cumulate libpopt-1.16-1.3 [ 22s] [29/109] cumulate libpython-2.7.18-1.6 [ 22s] [30/109] cumulate libsmack-1.3.1-1.3 [ 22s] [31/109] cumulate libsmartcols-2.39.3-1.3 [ 22s] [32/109] cumulate libsqlite-3.44.0-1.3 [ 22s] [33/109] cumulate libstdc++-14.1.0-1.6 [ 22s] [34/109] cumulate libuuid-2.39.3-1.3 [ 22s] [35/109] cumulate libxcrypt-4.4.36-1.6 [ 22s] [36/109] cumulate libzstd1-1.5.5-1.5 [ 22s] [37/109] cumulate m4-1.4.19-1.1 [ 22s] [38/109] cumulate net-tools-2.0_20121208git-1.3 [ 22s] [39/109] cumulate nspr-4.35-1.3 [ 22s] [40/109] cumulate patch-2.7.6-1.3 [ 22s] [41/109] cumulate pkg-config-0.29.2-1.4 [ 22s] [42/109] cumulate sed-4.1c-1.3 [ 22s] [43/109] cumulate update-alternatives-1.22.2-1.1 [ 22s] [44/109] cumulate which-2.17-1.1 [ 22s] [45/109] cumulate zlib-1.3-1.5 [ 22s] [46/109] cumulate build-compare-2023.06.18-1.1 [ 22s] [47/109] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 22s] [48/109] cumulate libstdc++-devel-14.1.0-1.6 [ 22s] [49/109] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 22s] [50/109] cumulate cpp-14.1.0-1.6 [ 22s] [51/109] cumulate gcc-c++-14.1.0-1.6 [ 22s] [52/109] cumulate binutils-libs-2.43-1.6 [ 22s] [53/109] cumulate coreutils-6.9-14.2 [ 22s] [54/109] cumulate db4-4.8.30.NC-1.4 [ 22s] [55/109] cumulate gawk-3.1.5-1.1 [ 22s] [56/109] cumulate grep-2.5.2-1.3 [ 22s] [57/109] cumulate libacl-2.3.2-1.3 [ 22s] [58/109] cumulate libcc1-14.1.0-1.6 [ 22s] [59/109] cumulate libelf-0.189-1.6 [ 22s] [60/109] cumulate libmount-2.39.3-1.3 [ 22s] [61/109] cumulate libubsan-14.1.0-1.6 [ 22s] [62/109] cumulate make-4.4-1.3 [ 22s] [63/109] cumulate nss-certs-3.98-1.6 [ 22s] [64/109] cumulate smack-1.3.1-1.3 [ 22s] [65/109] cumulate bzip2-1.0.8-1.4 [ 22s] [66/109] cumulate libfdisk-2.39.3-1.3 [ 22s] [67/109] cumulate libmagic-5.45-1.3 [ 22s] [68/109] cumulate libxml2-2.12.5-1.4 [ 22s] [69/109] cumulate xz-5.4.5-1.6 [ 22s] [70/109] cumulate perl-5.38.0-1.4 [ 22s] [71/109] cumulate build-mkbaselibs-20120927-1.1 [ 22s] [72/109] cumulate linux-glibc-devel-6.6-1.6 [ 22s] [73/109] cumulate terminfo-base-full-6.4-1.6 [ 22s] [74/109] cumulate autoconf-2.71-1.6 [ 22s] [75/109] cumulate file-5.45-1.3 [ 22s] [76/109] cumulate glibc-locale-2.39-1.6 [ 22s] [77/109] cumulate tar-1.17-1.1 [ 22s] [78/109] cumulate binutils-2.43-1.6 [ 22s] [79/109] cumulate gzip-1.3.12-1.3 [ 22s] [80/109] cumulate pam-1.1.6-1.5 [ 22s] [81/109] cumulate tzdata-2023c-1.1 [ 22s] [82/109] cumulate libdw-0.189-1.6 [ 22s] [83/109] cumulate libarchive-3.7.2-1.5 [ 22s] [84/109] cumulate gcc-14.1.0-1.6 [ 22s] [85/109] cumulate qemu-accel-x86_64-armv7hl-0.4-1.1 [ 22s] [86/109] cumulate automake-1.16.5-1.5 [ 22s] [87/109] cumulate libasm-0.189-1.6 [ 22s] [88/109] cumulate libncurses6-6.4-1.6 [ 22s] [89/109] cumulate build-20120927-1.1 [ 22s] [90/109] cumulate libncurses-6.4-1.6 [ 22s] [91/109] cumulate less-643-1.1 [ 22s] [92/109] cumulate libreadline-5.2-1.4 [ 22s] [93/109] cumulate libtool-2.4.7-1.6 [ 22s] [94/109] cumulate elfutils-0.189-1.6 [ 22s] [95/109] cumulate python-2.7.18-1.6 [ 22s] [96/109] cumulate util-linux-2.39.3-1.3 [ 22s] [97/109] cumulate python-pyparsing-2.2.0-1.1 [ 22s] [98/109] cumulate python-six-1.15.0-1.1 [ 22s] [99/109] cumulate python-appdirs-1.4.0-1.1 [ 22s] [100/109] cumulate python-xml-2.7.18-1.6 [ 22s] [101/109] cumulate util-linux-su-2.39.3-1.3 [ 22s] [102/109] cumulate python-packaging-20.8-1.1 [ 22s] [103/109] cumulate python-setuptools-44.1.1-1.1 [ 22s] [104/109] cumulate libxcrypt-devel-4.4.36-1.6 [ 22s] [105/109] cumulate nss-3.98-1.6 [ 22s] [106/109] cumulate glibc-devel-2.39-1.6 [ 22s] [107/109] cumulate libsoftokn3-3.98-1.6 [ 22s] [108/109] cumulate rpm-4.14.1.1-1.6 [ 22s] [109/109] cumulate rpm-build-4.14.1.1-1.6 [ 22s] now installing cumulated packages [ 23s] Preparing... ######################################## [ 23s] Updating / installing... [ 23s] setup-0.9-1.2 ######################################## [ 23s] filesystem-3.1-1.1 ######################################## [ 23s] libmagic-data-5.45-1.3 ######################################## [ 24s] glibc-2.39-1.6 ######################################## [ 24s] libgcc-14.1.0-1.6 ######################################## [ 24s] bash-3.2.57-1.1 ######################################## [ 24s] zlib-1.3-1.5 ######################################## [ 24s] coreutils-6.9-14.2 ######################################## [ 24s] libstdc++-14.1.0-1.6 ######################################## [ 25s] libbz2-1.0.8-1.4 ######################################## [ 25s] liblzma-5.4.5-1.6 ######################################## [ 25s] libelf-0.189-1.6 ######################################## [ 25s] libxcrypt-4.4.36-1.6 ######################################## [ 25s] libdw-0.189-1.6 ######################################## [ 26s] libmagic-5.45-1.3 ######################################## [ 26s] libblkid-2.39.3-1.3 ######################################## [ 26s] nspr-4.35-1.3 ######################################## [ 26s] pam-1.1.6-1.5 ######################################## [ 27s] libcap-2.69-1.5 ######################################## [ 27s] libfreebl3-3.98-1.6 ######################################## [ 27s] liblua-5.1.5-1.3 ######################################## [ 27s] libpopt-1.16-1.3 ######################################## [ 27s] libpython-2.7.18-1.6 ######################################## [ 28s] libsqlite-3.44.0-1.3 ######################################## [ 28s] libuuid-2.39.3-1.3 ######################################## [ 28s] libzstd1-1.5.5-1.5 ######################################## [ 28s] linux-glibc-devel-6.6-1.6 ######################################## [ 28s] terminfo-base-full-6.4-1.6 ######################################## [ 29s] libncurses6-6.4-1.6 ######################################## [ 29s] libreadline-5.2-1.4 ######################################## [ 29s] libfdisk-2.39.3-1.3 ######################################## [ 29s] nss-certs-3.98-1.6 ######################################## [ 29s] libsoftokn3-3.98-1.6 ######################################## [ 30s] nss-3.98-1.6 ######################################## [ 30s] libmount-2.39.3-1.3 ######################################## [ 30s] libasm-0.189-1.6 ######################################## [ 30s] libxml2-2.12.5-1.4 ######################################## [ 30s] xz-5.4.5-1.6 ######################################## [ 30s] bzip2-1.0.8-1.4 ######################################## [ 30s] db4-4.8.30.NC-1.4 ######################################## [ 30s] libcc1-14.1.0-1.6 ######################################## [ 31s] libubsan-14.1.0-1.6 ######################################## [ 31s] gzip-1.3.12-1.3 ######################################## [ 31s] binutils-libs-2.43-1.6 ######################################## [ 32s] binutils-2.43-1.6 ######################################## [ 32s] make-4.4-1.3 ######################################## [ 32s] findutils-4.3.8-1.3 ######################################## [ 32s] gdbm-1.8.3-1.6 ######################################## [ 35s] perl-5.38.0-1.4 ######################################## [ 35s] build-mkbaselibs-20120927-1.1 ######################################## [ 35s] libattr-2.5.1-1.3 ######################################## [ 35s] libacl-2.3.2-1.3 ######################################## [ 35s] tar-1.17-1.1 ######################################## [ 35s] libgfortran-14.1.0-1.6 ######################################## [ 36s] libgomp-14.1.0-1.6 ######################################## [ 36s] libitm-14.1.0-1.6 ######################################## [ 36s] libltdl-2.4.7-1.6 ######################################## [ 36s] libopenssl11-1.1.1w-1.5 ######################################## [ 37s] python-2.7.18-1.6 ######################################## [ 38s] python-six-1.15.0-1.1 ######################################## [ 38s] python-pyparsing-2.2.0-1.1 ######################################## [ 38s] python-packaging-20.8-1.1 ######################################## [ 38s] python-appdirs-1.4.0-1.1 ######################################## [ 38s] python-xml-2.7.18-1.6 ######################################## [ 38s] libopenssl3-3.0.13-1.6 ######################################## [ 38s] libarchive-3.7.2-1.5 ######################################## [ 39s] rpm-4.14.1.1-1.6 ######################################## [ 39s] libpcre-8.45-1.3 ######################################## [ 39s] libsmack-1.3.1-1.3 ######################################## [ 40s] libsmartcols-2.39.3-1.3 ######################################## [ 40s] m4-1.4.19-1.1 ######################################## [ 40s] autoconf-2.71-1.6 ######################################## [ 40s] automake-1.16.5-1.5 ######################################## [ 41s] patch-2.7.6-1.3 ######################################## [ 41s] pkg-config-0.29.2-1.4 ######################################## [ 41s] sed-4.1c-1.3 ######################################## [ 41s] util-linux-2.39.3-1.3 ######################################## [ 41s] libatomic-14.1.0-1.6 ######################################## [ 41s] libtool-2.4.7-1.6 ######################################## [ 41s] python-setuptools-44.1.1-1.1 ######################################## [ 41s] build-20120927-1.1 ######################################## [ 41s] libncurses-6.4-1.6 ######################################## [ 41s] libstdc++-devel-14.1.0-1.6 ######################################## [ 41s] build-compare-2023.06.18-1.1 ######################################## [ 41s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 44s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 48s] gcc-14.1.0-1.6 ######################################## [ 48s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 48s] glibc-devel-2.39-1.6 ######################################## [ 60s] qemu-accel-x86_64-armv7hl-0.4-1.1 ######################################## [ 61s] rpm-build-4.14.1.1-1.6 ######################################## [ 61s] util-linux-su-2.39.3-1.3 ######################################## [ 61s] smack-1.3.1-1.3 ######################################## [ 61s] grep-2.5.2-1.3 ######################################## [ 61s] elfutils-0.189-1.6 ######################################## [ 61s] less-643-1.1 ######################################## [ 61s] file-5.45-1.3 ######################################## [ 61s] glibc-locale-2.39-1.6 ######################################## [ 62s] tzdata-2023c-1.1 ######################################## [ 63s] cpp-14.1.0-1.6 ######################################## [ 65s] gcc-c++-14.1.0-1.6 ######################################## [ 65s] gawk-3.1.5-1.1 ######################################## [ 65s] cpio-2.8-1.1 ######################################## [ 65s] diffutils-3.10-1.1 ######################################## [ 65s] fdupes-2.2.1-1.4 ######################################## [ 65s] hostname-3.23-1.1 ######################################## [ 65s] net-tools-2.0_20121208git-1.3 ######################################## [ 65s] update-alternatives-1.22.2-1.1 ######################################## [ 65s] which-2.17-1.1 ######################################## [ 66s] now finalizing build dir... [ 68s] ----------------------------------------------------------------- [ 68s] I have the following modifications for python-ply.spec: [ 68s] 4c4 [ 68s] < Release: 0 [ 68s] --- [ 68s] > Release: 1.1 [ 68s] build target is armv7hl-tizen-linux [ 68s] ----------------------------------------------------------------- [ 68s] ----- building python-ply.spec (user abuild) [ 68s] ----------------------------------------------------------------- [ 68s] ----------------------------------------------------------------- [ 69s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/cd8db107c26b20aab04e6e244f77a7f7-python-ply' /home/abuild/rpmbuild/SOURCES/python-ply.spec [ 70s] Building target platforms: armv7hl-tizen-linux [ 70s] Building for target armv7hl-tizen-linux [ 70s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.pJGehF [ 70s] + umask 022 [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + rm -rf ply-3.11 [ 70s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ply-3.11.tar.gz [ 70s] + /bin/tar -xof - [ 70s] + STATUS=0 [ 70s] + '[' 0 -ne 0 ']' [ 70s] + cd ply-3.11 [ 70s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 70s] + echo 'Patch #0 (0001-Bump-to-python-ply-3.11.patch):' [ 70s] Patch #0 (0001-Bump-to-python-ply-3.11.patch): [ 70s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 70s] patching file LICENSE [ 70s] + cp /home/abuild/rpmbuild/SOURCES/python-ply.manifest . [ 70s] + chmod -x test/testlex.py [ 70s] + find example -type f -name '*.py' -exec sed -i 's|#!/usr/bin/env python||' '{}' + [ 70s] + _target= [ 70s] + _symlinks=0 [ 70s] + _files=() [ 70s] + fdupes -q -n -r example [ 70s] + read _file [ 70s] + exit 0 [ 70s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.0WL8DK [ 70s] + umask 022 [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + cd ply-3.11 [ 70s] + ref=/usr/lib/rpm [ 70s] + mints=0 [ 70s] + case $(uname -m) in [ 70s] ++ uname -m [ 70s] + for s in guess sub [ 70s] ++ find -maxdepth 8 -name config.guess [ 70s] + for s in guess sub [ 70s] ++ find -maxdepth 8 -name config.sub [ 70s] + LANG=C [ 70s] + export LANG [ 70s] + unset DISPLAY [ 70s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 70s] + export CFLAGS [ 70s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 70s] + export CXXFLAGS [ 70s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 70s] + export FFLAGS [ 70s] + LDFLAGS= [ 70s] + export LDFLAGS [ 70s] + python setup.py build [ 72s] running build [ 72s] running build_py [ 72s] creating build [ 72s] creating build/lib [ 72s] creating build/lib/ply [ 72s] copying ply/yacc.py -> build/lib/ply [ 72s] copying ply/__init__.py -> build/lib/ply [ 72s] copying ply/lex.py -> build/lib/ply [ 72s] copying ply/cpp.py -> build/lib/ply [ 72s] copying ply/ctokens.py -> build/lib/ply [ 72s] copying ply/ygen.py -> build/lib/ply [ 72s] + exit 0 [ 72s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.hJFZTk [ 72s] + umask 022 [ 72s] + cd /home/abuild/rpmbuild/BUILD [ 72s] + cd ply-3.11 [ 72s] + LANG=C [ 72s] + export LANG [ 72s] + unset DISPLAY [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm [ 72s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm [ 72s] + python setup.py install --prefix=/usr --root=/home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm [ 74s] running install [ 74s] running build [ 74s] running build_py [ 74s] running install_lib [ 74s] creating /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr [ 74s] creating /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib [ 74s] creating /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7 [ 74s] creating /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages [ 74s] creating /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 74s] copying build/lib/ply/yacc.py -> /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 74s] copying build/lib/ply/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 74s] copying build/lib/ply/lex.py -> /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 74s] copying build/lib/ply/cpp.py -> /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 74s] copying build/lib/ply/ctokens.py -> /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 74s] copying build/lib/ply/ygen.py -> /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply [ 74s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply/yacc.py to yacc.pyc [ 74s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply/__init__.py to __init__.pyc [ 74s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply/lex.py to lex.pyc [ 74s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply/cpp.py to cpp.pyc [ 74s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply/ctokens.py to ctokens.pyc [ 74s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply/ygen.py to ygen.pyc [ 74s] running install_egg_info [ 74s] running egg_info [ 74s] writing ply.egg-info/PKG-INFO [ 74s] writing top-level names to ply.egg-info/top_level.txt [ 74s] writing dependency_links to ply.egg-info/dependency_links.txt [ 74s] reading manifest file 'ply.egg-info/SOURCES.txt' [ 74s] reading manifest template 'MANIFEST.in' [ 74s] warning: no previously-included files matching '*.pyc' found anywhere in distribution [ 74s] writing manifest file 'ply.egg-info/SOURCES.txt' [ 74s] Copying ply.egg-info to /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages/ply-3.11-py2.7.egg-info [ 74s] running install_scripts [ 74s] + _target= [ 74s] + _symlinks=0 [ 74s] + _files=() [ 74s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/lib/python2.7/site-packages [ 74s] + read _file [ 74s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 3.11-1.1 --unique-debug-src-base python-ply-3.11-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/ply-3.11 [ 75s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ply-3.11/python-ply-debuginfo.manifest [ 75s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ply-3.11/python-ply-debugsource.manifest [ 75s] + /usr/lib/rpm/check-buildroot [ 75s] + /usr/lib/rpm//brp-compress [ 75s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 75s] + /usr/lib/rpm/brp-python-hardlink [ 77s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm [ 77s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/ply-3.11/isu.list [ 77s] ~/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm ~/rpmbuild/BUILD/ply-3.11 [ 77s] ~/rpmbuild/BUILD/ply-3.11 [ 77s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 80s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.Q1MrkJ [ 80s] Processing files: python-ply-3.11-1.1.noarch [ 80s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 80s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 80s] [ 80s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.dXKPtY [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd ply-3.11 [ 80s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/share/licenses/python-ply [ 80s] + export LC_ALL=C [ 80s] + LC_ALL=C [ 80s] + export LICENSEDIR [ 80s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/share/licenses/python-ply [ 80s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm/usr/share/licenses/python-ply [ 80s] + exit 0 [ 83s] Provides: python-ply = 3.11-1.1 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Requires: python(abi) = 2.7 [ 83s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm [ 83s] Wrote: /home/abuild/rpmbuild/SRPMS/python-ply-3.11-1.1.src.rpm [ 83s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python-ply-3.11-1.1.noarch.rpm [ 83s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.QDQXqI [ 83s] + umask 022 [ 83s] + cd /home/abuild/rpmbuild/BUILD [ 83s] + cd ply-3.11 [ 83s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python-ply-3.11-1.1.arm [ 83s] + exit 0 [ 84s] ... checking for files with abuild user/group [ 84s] ... creating baselibs [ 85s] [ 85s] 8aea0a10cbff finished "build python-ply.spec" at Fri Nov 29 17:37:22 UTC 2024. [ 85s] Retried build at Sat Nov 30 02:52:24 2024 returned same result, skipped Retried build at Mon Dec 2 17:20:41 2024 returned same result, skipped Retried build at Tue Dec 10 08:50:54 2024 returned same result, skipped