[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] 86c5bb0bb39f started "build perl-DBD-SQLite.spec" at Fri Dec 13 10:10:39 UTC 2024. [ 0s] [ 0s] Building perl-DBD-SQLite for project 'Tizen-Base' repository 'standard' arch 'aarch64' srcmd5 '4fb418fbb3d4945c6ef63c7af57f58a8' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build-srcdir/perl-DBD-SQLite.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build-srcdir/perl-DBD-SQLite.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/11/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build-srcdir/perl-DBD-SQLite.spec build ... [ 2s] registering binfmt handlers for cross build [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] [1/42] preinstalling libmagic-data... [ 4s] [2/42] preinstalling libncurses... [ 4s] [3/42] preinstalling setup... [ 4s] [4/42] preinstalling filesystem... [ 5s] [5/42] preinstalling glibc... [ 5s] [6/42] preinstalling bash... [ 6s] [7/42] preinstalling diffutils... [ 6s] [8/42] preinstalling grep... [ 6s] [9/42] preinstalling libattr... [ 6s] [10/42] preinstalling libblkid... [ 6s] [11/42] preinstalling libbz2... [ 7s] [12/42] preinstalling libfreebl3... [ 7s] [13/42] preinstalling libgcc... [ 7s] [14/42] preinstalling liblua... [ 8s] [15/42] preinstalling liblzma... [ 8s] [16/42] preinstalling libpopt... [ 8s] [17/42] preinstalling libreadline... [ 9s] [18/42] preinstalling libsmack... [ 9s] [19/42] preinstalling libsqlite... [ 9s] [20/42] preinstalling libuuid... [ 9s] [21/42] preinstalling libxcrypt... [ 10s] [22/42] preinstalling libzstd1... [ 10s] [23/42] preinstalling nspr... [ 10s] [24/42] preinstalling sed... [ 10s] [25/42] preinstalling zlib... [ 10s] [26/42] preinstalling qemu-accel-x86_64-aarch64... [ 39s] [27/42] preinstalling qemu-linux-user-x86_64-cross... [ 47s] [28/42] preinstalling coreutils... [ 47s] [29/42] preinstalling libacl... [ 47s] [30/42] preinstalling libcap... [ 48s] [31/42] preinstalling libelf... [ 48s] [32/42] preinstalling libmount... [ 48s] [33/42] preinstalling smack... [ 48s] [34/42] preinstalling bzip2... [ 48s] [35/42] preinstalling libmagic... [ 49s] [36/42] preinstalling libxml2... [ 49s] [37/42] preinstalling tar... [ 49s] [38/42] preinstalling util-linux... [ 50s] [39/42] preinstalling util-linux-su... [ 50s] [40/42] preinstalling nss... [ 50s] [41/42] preinstalling libsoftokn3... [ 50s] [42/42] preinstalling rpm... [ 52s] running qemu-linux-user-x86_64-cross postinstall script [ 53s] running qemu-accel-x86_64-aarch64 postinstall script [ 53s] mv: cannot stat `/usr/lib64/gcc/aarch64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 53s] running setup postinstall script [ 53s] chroot: failed to run command '': No such file or directory [ 53s] initializing rpm db... [ 54s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 54s] breaking dependency libxcrypt-devel -> glibc-devel [ 54s] cycle: libsoftokn3 -> nss [ 54s] breaking dependency nss -> libsoftokn3 [ 54s] done [ 54s] querying package ids... [ 56s] [1/100] cumulate libmagic-data-5.45-1.3 [ 56s] [2/100] cumulate setup-0.9-1.11 [ 56s] [3/100] cumulate filesystem-3.1-1.1 [ 56s] [4/100] cumulate glibc-2.39-1.6 [ 56s] [5/100] cumulate bash-3.2.57-1.1 [ 56s] [6/100] cumulate cpio-2.8-1.1 [ 56s] [7/100] cumulate diffutils-3.10-1.1 [ 56s] [8/100] cumulate findutils-4.3.8-1.4 [ 56s] [9/100] cumulate gdbm-1.8.3-1.6 [ 56s] [10/100] cumulate hostname-3.23-1.1 [ 56s] [11/100] cumulate libatomic-14.2.0-1.6 [ 56s] [12/100] cumulate libattr-2.5.1-1.4 [ 56s] [13/100] cumulate libblkid-2.39.3-1.4 [ 56s] [14/100] cumulate libbz2-1.0.8-1.4 [ 56s] [15/100] cumulate libfreebl3-3.98-1.5 [ 56s] [16/100] cumulate libgcc-14.2.0-1.6 [ 56s] [17/100] cumulate libgomp-14.2.0-1.6 [ 56s] [18/100] cumulate libitm-14.2.0-1.6 [ 56s] [19/100] cumulate libltdl-2.4.7-1.6 [ 56s] [20/100] cumulate liblua-5.1.5-1.4 [ 56s] [21/100] cumulate liblzma-5.4.5-1.6 [ 56s] [22/100] cumulate libopenssl3-3.0.13-1.6 [ 56s] [23/100] cumulate libpcre-8.45-1.4 [ 56s] [24/100] cumulate libpopt-1.16-1.3 [ 56s] [25/100] cumulate libsmack-1.3.1-1.3 [ 56s] [26/100] cumulate libsmartcols-2.39.3-1.4 [ 56s] [27/100] cumulate libsqlite-3.44.0-1.4 [ 56s] [28/100] cumulate libuuid-2.39.3-1.4 [ 56s] [29/100] cumulate libxcrypt-4.4.36-1.5 [ 56s] [30/100] cumulate libzstd1-1.5.5-1.5 [ 56s] [31/100] cumulate m4-1.4.19-1.1 [ 56s] [32/100] cumulate net-tools-2.0_20121208git-1.3 [ 56s] [33/100] cumulate nspr-4.35-1.4 [ 56s] [34/100] cumulate patch-2.7.6-1.3 [ 56s] [35/100] cumulate pkg-config-0.29.2-1.4 [ 56s] [36/100] cumulate sed-4.1c-1.4 [ 56s] [37/100] cumulate update-alternatives-1.22.2-1.1 [ 56s] [38/100] cumulate which-2.17-1.1 [ 56s] [39/100] cumulate zlib-1.3-1.5 [ 56s] [40/100] cumulate build-compare-2023.06.18-1.1 [ 56s] [41/100] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 56s] [42/100] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 56s] [43/100] cumulate binutils-libs-2.43-1.6 [ 56s] [44/100] cumulate coreutils-6.9-14.1 [ 56s] [45/100] cumulate cpp-14.2.0-1.6 [ 56s] [46/100] cumulate gawk-3.1.5-1.1 [ 56s] [47/100] cumulate gcc-c++-14.2.0-1.6 [ 56s] [48/100] cumulate grep-2.5.2-1.3 [ 56s] [49/100] cumulate libacl-2.3.2-1.4 [ 56s] [50/100] cumulate libcap-2.69-1.4 [ 56s] [51/100] cumulate libelf-0.189-1.6 [ 56s] [52/100] cumulate libgfortran-14.2.0-1.6 [ 56s] [53/100] cumulate libmount-2.39.3-1.4 [ 56s] [54/100] cumulate libstdc++-14.2.0-1.6 [ 56s] [55/100] cumulate make-4.4-1.4 [ 56s] [56/100] cumulate nss-certs-3.98-1.5 [ 56s] [57/100] cumulate smack-1.3.1-1.3 [ 56s] [58/100] cumulate bzip2-1.0.8-1.4 [ 56s] [59/100] cumulate libfdisk-2.39.3-1.4 [ 56s] [60/100] cumulate libmagic-5.45-1.3 [ 56s] [61/100] cumulate libxml2-2.12.5-1.5 [ 56s] [62/100] cumulate xz-5.4.5-1.6 [ 56s] [63/100] cumulate perl-5.38.0-1.5 [ 56s] [64/100] cumulate build-mkbaselibs-20120927-1.1 [ 56s] [65/100] cumulate libstdc++-devel-14.2.0-1.6 [ 56s] [66/100] cumulate linux-glibc-devel-6.6-1.5 [ 56s] [67/100] cumulate file-5.45-1.3 [ 56s] [68/100] cumulate perl-DBI-1.628-1.1 [ 56s] [69/100] cumulate tar-1.17-1.1 [ 56s] [70/100] cumulate terminfo-base-full-6.4-1.6 [ 56s] [71/100] cumulate autoconf-2.71-1.5 [ 56s] [72/100] cumulate glibc-locale-2.39-1.6 [ 56s] [73/100] cumulate gzip-1.3.12-1.3 [ 56s] [74/100] cumulate libcc1-14.2.0-1.6 [ 56s] [75/100] cumulate libhwasan-14.2.0-1.6 [ 56s] [76/100] cumulate libubsan-14.2.0-1.6 [ 56s] [77/100] cumulate binutils-2.43-1.6 [ 56s] [78/100] cumulate pam-1.1.6-1.3 [ 56s] [79/100] cumulate tzdata-2023c-1.1 [ 56s] [80/100] cumulate libdw-0.189-1.6 [ 56s] [81/100] cumulate libarchive-3.7.2-1.5 [ 56s] [82/100] cumulate automake-1.16.5-1.5 [ 56s] [83/100] cumulate libasm-0.189-1.6 [ 56s] [84/100] cumulate libncurses6-6.4-1.6 [ 56s] [85/100] cumulate build-20120927-1.1 [ 56s] [86/100] cumulate gcc-14.2.0-1.6 [ 56s] [87/100] cumulate libncurses-6.4-1.6 [ 56s] [88/100] cumulate less-643-1.1 [ 56s] [89/100] cumulate libreadline-5.2-1.4 [ 56s] [90/100] cumulate qemu-accel-x86_64-aarch64-0.4-1.1 [ 56s] [91/100] cumulate libtool-2.4.7-1.6 [ 56s] [92/100] cumulate elfutils-0.189-1.6 [ 56s] [93/100] cumulate util-linux-2.39.3-1.4 [ 56s] [94/100] cumulate util-linux-su-2.39.3-1.4 [ 56s] [95/100] cumulate libxcrypt-devel-4.4.36-1.5 [ 56s] [96/100] cumulate nss-3.98-1.5 [ 56s] [97/100] cumulate glibc-devel-2.39-1.6 [ 56s] [98/100] cumulate libsoftokn3-3.98-1.5 [ 56s] [99/100] cumulate rpm-4.14.1.1-1.5 [ 56s] [100/100] cumulate rpm-build-4.14.1.1-1.5 [ 56s] now installing cumulated packages [ 58s] Preparing... ######################################## [ 58s] Updating / installing... [ 58s] setup-0.9-1.11 ######################################## [ 58s] filesystem-3.1-1.1 ######################################## [ 59s] glibc-2.39-1.6 ######################################## [ 59s] bash-3.2.57-1.1 ######################################## [ 59s] zlib-1.3-1.5 ######################################## [ 59s] libgcc-14.2.0-1.6 ######################################## [ 59s] libstdc++-14.2.0-1.6 ######################################## [ 60s] coreutils-6.9-14.1 ######################################## [ 60s] libbz2-1.0.8-1.4 ######################################## [ 60s] liblzma-5.4.5-1.6 ######################################## [ 60s] libelf-0.189-1.6 ######################################## [ 61s] libdw-0.189-1.6 ######################################## [ 61s] libxcrypt-4.4.36-1.5 ######################################## [ 61s] libblkid-2.39.3-1.4 ######################################## [ 61s] nspr-4.35-1.4 ######################################## [ 61s] pam-1.1.6-1.3 ######################################## [ 62s] libcap-2.69-1.4 ######################################## [ 62s] libfreebl3-3.98-1.5 ######################################## [ 62s] liblua-5.1.5-1.4 ######################################## [ 62s] libpopt-1.16-1.3 ######################################## [ 63s] libuuid-2.39.3-1.4 ######################################## [ 63s] libzstd1-1.5.5-1.5 ######################################## [ 63s] libfdisk-2.39.3-1.4 ######################################## [ 63s] nss-certs-3.98-1.5 ######################################## [ 63s] libmount-2.39.3-1.4 ######################################## [ 63s] libasm-0.189-1.6 ######################################## [ 63s] libxml2-2.12.5-1.5 ######################################## [ 64s] xz-5.4.5-1.6 ######################################## [ 64s] bzip2-1.0.8-1.4 ######################################## [ 64s] linux-glibc-devel-6.6-1.5 ######################################## [ 64s] terminfo-base-full-6.4-1.6 ######################################## [ 64s] libncurses6-6.4-1.6 ######################################## [ 65s] libreadline-5.2-1.4 ######################################## [ 65s] gzip-1.3.12-1.3 ######################################## [ 65s] libcc1-14.2.0-1.6 ######################################## [ 65s] libhwasan-14.2.0-1.6 ######################################## [ 65s] libubsan-14.2.0-1.6 ######################################## [ 66s] libgfortran-14.2.0-1.6 ######################################## [ 66s] binutils-libs-2.43-1.6 ######################################## [ 67s] binutils-2.43-1.6 ######################################## [ 67s] make-4.4-1.4 ######################################## [ 67s] findutils-4.3.8-1.4 ######################################## [ 67s] gdbm-1.8.3-1.6 ######################################## [ 72s] perl-5.38.0-1.5 ######################################## [ 72s] build-mkbaselibs-20120927-1.1 ######################################## [ 72s] libatomic-14.2.0-1.6 ######################################## [ 72s] libattr-2.5.1-1.4 ######################################## [ 72s] libacl-2.3.2-1.4 ######################################## [ 73s] tar-1.17-1.1 ######################################## [ 73s] libgomp-14.2.0-1.6 ######################################## [ 73s] libitm-14.2.0-1.6 ######################################## [ 77s] gcc-14.2.0-1.6 ######################################## [ 77s] libltdl-2.4.7-1.6 ######################################## [ 77s] libopenssl3-3.0.13-1.6 ######################################## [ 77s] libarchive-3.7.2-1.5 ######################################## [ 78s] libpcre-8.45-1.4 ######################################## [ 78s] libsmack-1.3.1-1.3 ######################################## [ 78s] libsmartcols-2.39.3-1.4 ######################################## [ 78s] libsqlite-3.44.0-1.4 ######################################## [ 79s] libsoftokn3-3.98-1.5 ######################################## [ 79s] nss-3.98-1.5 ######################################## [ 80s] m4-1.4.19-1.1 ######################################## [ 80s] autoconf-2.71-1.5 ######################################## [ 80s] automake-1.16.5-1.5 ######################################## [ 80s] patch-2.7.6-1.3 ######################################## [ 80s] pkg-config-0.29.2-1.4 ######################################## [ 80s] libxcrypt-devel-4.4.36-1.5 ######################################## [ 80s] glibc-devel-2.39-1.6 ######################################## [ 80s] sed-4.1c-1.4 ######################################## [ 81s] util-linux-2.39.3-1.4 ######################################## [ 81s] libmagic-data-5.45-1.3 ######################################## [ 82s] libmagic-5.45-1.3 ######################################## [ 82s] rpm-4.14.1.1-1.5 ######################################## [ 83s] rpm-build-4.14.1.1-1.5 ######################################## [ 83s] file-5.45-1.3 ######################################## [ 83s] util-linux-su-2.39.3-1.4 ######################################## [ 83s] libtool-2.4.7-1.6 ######################################## [ 83s] smack-1.3.1-1.3 ######################################## [ 83s] grep-2.5.2-1.3 ######################################## [ 99s] qemu-accel-x86_64-aarch64-0.4-1.1 ######################################## [ 99s] build-20120927-1.1 ######################################## [ 100s] perl-DBI-1.628-1.1 ######################################## [ 100s] libncurses-6.4-1.6 ######################################## [ 100s] less-643-1.1 ######################################## [ 100s] elfutils-0.189-1.6 ######################################## [ 101s] glibc-locale-2.39-1.6 ######################################## [ 101s] tzdata-2023c-1.1 ######################################## [ 103s] libstdc++-devel-14.2.0-1.6 ######################################## [ 104s] cpp-14.2.0-1.6 ######################################## [ 107s] gcc-c++-14.2.0-1.6 ######################################## [ 107s] build-compare-2023.06.18-1.1 ######################################## [ 107s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 116s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 116s] gawk-3.1.5-1.1 ######################################## [ 116s] cpio-2.8-1.1 ######################################## [ 116s] diffutils-3.10-1.1 ######################################## [ 116s] hostname-3.23-1.1 ######################################## [ 117s] net-tools-2.0_20121208git-1.3 ######################################## [ 117s] update-alternatives-1.22.2-1.1 ######################################## [ 117s] which-2.17-1.1 ######################################## [ 117s] now finalizing build dir... [ 119s] ----------------------------------------------------------------- [ 119s] I have the following modifications for perl-DBD-SQLite.spec: [ 119s] 22c22 [ 119s] < Release: 0 [ 119s] --- [ 119s] > Release: 1.1 [ 120s] build target is aarch64-tizen-linux [ 120s] ----------------------------------------------------------------- [ 120s] ----- building perl-DBD-SQLite.spec (user abuild) [ 120s] ----------------------------------------------------------------- [ 120s] ----------------------------------------------------------------- [ 120s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/4fb418fbb3d4945c6ef63c7af57f58a8-perl-DBD-SQLite' /home/abuild/rpmbuild/SOURCES/perl-DBD-SQLite.spec [ 127s] Building target platforms: aarch64-tizen-linux [ 127s] Building for target aarch64-tizen-linux [ 127s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.SWGuPH [ 127s] + umask 022 [ 127s] + cd /home/abuild/rpmbuild/BUILD [ 127s] + cd /home/abuild/rpmbuild/BUILD [ 127s] + rm -rf DBD-SQLite-1.50 [ 127s] + /bin/tar -xof - [ 127s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/DBD-SQLite-1.50.tar.gz [ 127s] + STATUS=0 [ 127s] + '[' 0 -ne 0 ']' [ 127s] + cd DBD-SQLite-1.50 [ 127s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 127s] + echo 'Patch #0 (0001-SQLite-fix-error-by-Wimplicit-function-declaration.patch):' [ 127s] Patch #0 (0001-SQLite-fix-error-by-Wimplicit-function-declaration.patch): [ 127s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 127s] patching file SQLite.xs [ 127s] + find . -type f '!' -name '*.pl' -print0 [ 127s] + xargs -0 chmod 644 [ 127s] + exit 0 [ 127s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.QPjnMD [ 127s] + umask 022 [ 127s] + cd /home/abuild/rpmbuild/BUILD [ 127s] + cd DBD-SQLite-1.50 [ 127s] + ref=/usr/lib/rpm [ 127s] + mints=0 [ 127s] + case $(uname -m) in [ 127s] ++ uname -m [ 127s] + mints=20120610 [ 127s] + for s in guess sub [ 127s] ++ find -maxdepth 8 -name config.guess [ 127s] + for s in guess sub [ 127s] ++ find -maxdepth 8 -name config.sub [ 127s] + LANG=C [ 127s] + export LANG [ 127s] + unset DISPLAY [ 127s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 127s] + export CFLAGS [ 127s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 127s] + export CXXFLAGS [ 127s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 127s] + export FFLAGS [ 127s] + LDFLAGS= [ 127s] + export LDFLAGS [ 127s] + /bin/perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 130s] Checking if your kit is complete... [ 130s] Looks good [ 131s] Using DBI 1.628 (for perl 5.038000 on aarch64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBI/ [ 131s] Generating a Unix-style Makefile [ 131s] Writing Makefile for DBD::SQLite [ 131s] Writing MYMETA.yml and MYMETA.json [ 131s] + /bin/make -j12 [ 131s] "/usr/bin/perl" -p -e "s/~DRIVER~/SQLite/g" /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBI/Driver.xst > SQLite.xsi [ 131s] Running Mkbootstrap for SQLite () [ 131s] cc -c -I. -I/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE" -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 dbdimp.c [ 132s] In file included from SQLiteXS.h:11, [ 132s] from dbdimp.c:6: [ 132s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined [ 132s] 1059 | #define PERL_USE_SAFE_PUTENV [ 132s] | ^~~~~~~~~~~~~~~~~~~~ [ 132s] : note: this is the location of the previous definition [ 132s] cc -c -I. -I/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE" -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 sqlite3.c [ 132s] chmod 644 "SQLite.bs" [ 132s] "/usr/bin/perl" "/usr/lib64/perl5/5.38.0/ExtUtils/xsubpp" -typemap '/usr/lib64/perl5/5.38.0/ExtUtils/typemap' -typemap '/home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/typemap' SQLite.xs > SQLite.xsc [ 132s] cp lib/DBD/SQLite/VirtualTable/PerlData.pm blib/lib/DBD/SQLite/VirtualTable/PerlData.pm [ 132s] cp lib/DBD/SQLite/VirtualTable/FileContent.pm blib/lib/DBD/SQLite/VirtualTable/FileContent.pm [ 132s] cp lib/DBD/SQLite/Cookbook.pod blib/lib/DBD/SQLite/Cookbook.pod [ 132s] cp lib/DBD/SQLite/Fulltext_search.pod blib/lib/DBD/SQLite/Fulltext_search.pod [ 132s] cp lib/DBD/SQLite/VirtualTable.pm blib/lib/DBD/SQLite/VirtualTable.pm [ 132s] cp lib/DBD/SQLite.pm blib/lib/DBD/SQLite.pm [ 132s] cp lib/DBD/SQLite/Constants.pm blib/lib/DBD/SQLite/Constants.pm [ 133s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644 [ 133s] dbdimp.c: In function 'sqlite_db_do_sv': [ 133s] dbdimp.c:485:9: warning: unused variable 'i' [-Wunused-variable] [ 133s] 485 | int i; [ 133s] | ^ [ 133s] dbdimp.c: In function 'sqlite_db_disconnect': [ 133s] dbdimp.c:636:17: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 133s] 636 | while ( s = imp_dbh->stmt_list ) { [ 133s] | ^ [ 133s] dbdimp.c:651:12: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 133s] 651 | while( s = imp_dbh->stmt_list ) { [ 133s] | ^ [ 133s] dbdimp.c: In function 'sqlite_st_prepare_sv': [ 133s] dbdimp.c:865:9: warning: the address of 'extra' will always evaluate as 'true' [-Waddress] [ 133s] 865 | if (&extra && imp_dbh->allow_multiple_statements) { [ 133s] | ^ [ 133s] In file included from /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/perl.h:6168: [ 133s] dbdimp.c: In function 'sqlite_db_func_dispatcher': [ 133s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value] [ 133s] 162 | #define POPs (*sp--) [ 133s] | ~^~~~~~ [ 133s] dbdimp.c:1635:9: note: in expansion of macro 'POPs' [ 133s] 1635 | POPs; [ 133s] | ^~~~ [ 133s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value] [ 133s] 162 | #define POPs (*sp--) [ 133s] | ~^~~~~~ [ 133s] dbdimp.c:1643:13: note: in expansion of macro 'POPs' [ 133s] 1643 | POPs; [ 133s] | ^~~~ [ 133s] dbdimp.c: In function 'sqlite_db_aggr_new_dispatcher': [ 133s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value] [ 133s] 162 | #define POPs (*sp--) [ 133s] | ~^~~~~~ [ 133s] dbdimp.c:1820:9: note: in expansion of macro 'POPs' [ 133s] 1820 | POPs; [ 133s] | ^~~~ [ 133s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value] [ 133s] 162 | #define POPs (*sp--) [ 133s] | ~^~~~~~ [ 133s] dbdimp.c:1828:13: note: in expansion of macro 'POPs' [ 133s] 1828 | POPs; [ 133s] | ^~~~ [ 133s] dbdimp.c: In function 'sqlite_db_aggr_step_dispatcher': [ 133s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value] [ 133s] 162 | #define POPs (*sp--) [ 133s] | ~^~~~~~ [ 133s] dbdimp.c:1885:7: note: in expansion of macro 'POPs' [ 133s] 1885 | POPs; [ 133s] | ^~~~ [ 133s] dbdimp.c: In function 'sqlite_db_aggr_finalize_dispatcher': [ 133s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value] [ 133s] 162 | #define POPs (*sp--) [ 133s] | ~^~~~~~ [ 133s] dbdimp.c:1926:13: note: in expansion of macro 'POPs' [ 133s] 1926 | POPs; [ 133s] | ^~~~ [ 133s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value] [ 133s] 162 | #define POPs (*sp--) [ 133s] | ~^~~~~~ [ 133s] dbdimp.c:1933:17: note: in expansion of macro 'POPs' [ 133s] 1933 | POPs; [ 133s] | ^~~~ [ 133s] dbdimp.c: In function 'sqlite_db_trace_dispatcher': [ 133s] dbdimp.c:2413:9: warning: variable 'retval' set but not used [-Wunused-but-set-variable] [ 133s] 2413 | int retval = 0; [ 133s] | ^~~~~~ [ 133s] dbdimp.c: In function 'sqlite_db_profile_dispatcher': [ 133s] dbdimp.c:2471:9: warning: variable 'retval' set but not used [-Wunused-but-set-variable] [ 133s] 2471 | int retval = 0; [ 133s] | ^~~~~~ [ 133s] dbdimp.c: In function 'perl_tokenizer_Next': [ 133s] dbdimp.c:2803:12: warning: unused variable 'n_a' [-Wunused-variable] [ 133s] 2803 | STRLEN n_a; /* this is required for older perls < 5.8.8 */ [ 133s] | ^~~ [ 133s] dbdimp.c: In function 'sqlite_db_destroy_module_data': [ 133s] dbdimp.c:3664:9: warning: unused variable 'rc' [-Wunused-variable] [ 133s] 3664 | int rc = SQLITE_ERROR; [ 133s] | ^~ [ 133s] In file included from SQLiteXS.h:17: [ 133s] dbdimp.h: At top level: [ 133s] dbdimp.h:149:1: warning: 'newUTF8SVpvn' defined but not used [-Wunused-function] [ 133s] 149 | newUTF8SVpvn(char *s, STRLEN len) { [ 133s] | ^~~~~~~~~~~~ [ 133s] dbdimp.h:139:1: warning: 'newUTF8SVpv' defined but not used [-Wunused-function] [ 133s] 139 | newUTF8SVpv(char *s, STRLEN len) { [ 133s] | ^~~~~~~~~~~ [ 134s] dbdimp.c: In function 'perl_vt_Eof': [ 134s] dbdimp.c:3378:12: warning: 'eof' may be used uninitialized [-Wmaybe-uninitialized] [ 134s] 3378 | return eof; [ 134s] | ^~~ [ 134s] dbdimp.c:3354:16: note: 'eof' was declared here [ 134s] 3354 | int count, eof; [ 134s] | ^~~ [ 137s] mv SQLite.xsc SQLite.c [ 137s] cc -c -I. -I/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE" -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 SQLite.c [ 137s] In file included from SQLiteXS.h:11, [ 137s] from SQLite.xs:3: [ 137s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined [ 137s] 1059 | #define PERL_USE_SAFE_PUTENV [ 137s] | ^~~~~~~~~~~~~~~~~~~~ [ 137s] : note: this is the location of the previous definition [ 138s] In file included from SQLiteXS.h:12: [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_last_insert_rowid': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:198:5: note: in expansion of macro 'dXSI32' [ 138s] 198 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_create_function': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:223:5: note: in expansion of macro 'dXSI32' [ 138s] 223 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_enable_load_extension': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:264:5: note: in expansion of macro 'dXSI32' [ 138s] 264 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_load_extension': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:290:5: note: in expansion of macro 'dXSI32' [ 138s] 290 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_create_aggregate': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:325:5: note: in expansion of macro 'dXSI32' [ 138s] 325 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_create_collation': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:363:5: note: in expansion of macro 'dXSI32' [ 138s] 363 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_collation_needed': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:391:5: note: in expansion of macro 'dXSI32' [ 138s] 391 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_progress_handler': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:413:5: note: in expansion of macro 'dXSI32' [ 138s] 413 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_profile': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:466:5: note: in expansion of macro 'dXSI32' [ 138s] 466 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_commit_hook': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:492:5: note: in expansion of macro 'dXSI32' [ 138s] 492 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_rollback_hook': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:517:5: note: in expansion of macro 'dXSI32' [ 138s] 517 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_update_hook': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:542:5: note: in expansion of macro 'dXSI32' [ 138s] 542 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_set_authorizer': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:567:5: note: in expansion of macro 'dXSI32' [ 138s] 567 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_busy_timeout': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:593:5: note: in expansion of macro 'dXSI32' [ 138s] 593 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_backup_from_file': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:623:5: note: in expansion of macro 'dXSI32' [ 138s] 623 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_backup_to_file': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:647:5: note: in expansion of macro 'dXSI32' [ 138s] 647 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_table_column_metadata': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:671:5: note: in expansion of macro 'dXSI32' [ 138s] 671 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_db_filename': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:702:5: note: in expansion of macro 'dXSI32' [ 138s] 702 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_register_fts3_perl_tokenizer': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:723:5: note: in expansion of macro 'dXSI32' [ 138s] 723 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_db_status': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:745:5: note: in expansion of macro 'dXSI32' [ 138s] 745 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__db_create_module': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:778:5: note: in expansion of macro 'dXSI32' [ 138s] 778 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite__st_st_status': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 138s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 138s] | ^~ [ 138s] SQLite.c:806:5: note: in expansion of macro 'dXSI32' [ 138s] 806 | dXSI32; [ 138s] | ^~~~~~ [ 138s] SQLite.c: In function 'XS_DBD__SQLite_compile_options': [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/XSUB.h:189:28: warning: unused variable 'targ' [-Wunused-variable] [ 138s] 189 | #define dXSTARG SV * const targ = ((PL_op->op_private & OPpENTERSUB_HASTARG) \ [ 138s] | ^~~~ [ 138s] SQLite.c:843:9: note: in expansion of macro 'dXSTARG' [ 138s] 843 | dXSTARG; [ 138s] | ^~~~~~~ [ 138s] SQLite.c:842:17: warning: unused variable 'RETVAL' [-Wunused-variable] [ 138s] 842 | int RETVAL; [ 138s] | ^~~~~~ [ 138s] ./SQLite.xsi: In function 'XS_DBD__SQLite__db_selectrow_arrayref': [ 138s] ./SQLite.xsi:208:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations] [ 138s] 208 | if (GIMME == G_SCALAR) [ 138s] | ^~ [ 138s] In file included from /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/perl.h:6188: [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/proto.h:1019:1: note: declared here [ 138s] 1019 | Perl_dowantarray(pTHX) [ 138s] | ^~~~~~~~~~~~~~~~ [ 138s] ./SQLite.xsi:214:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations] [ 138s] 214 | if (GIMME == G_SCALAR) [ 138s] | ^~ [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/proto.h:1019:1: note: declared here [ 138s] 1019 | Perl_dowantarray(pTHX) [ 138s] | ^~~~~~~~~~~~~~~~ [ 138s] In file included from SQLiteXS.h:17: [ 138s] dbdimp.h: At top level: [ 138s] dbdimp.h:149:1: warning: 'newUTF8SVpvn' defined but not used [-Wunused-function] [ 138s] 149 | newUTF8SVpvn(char *s, STRLEN len) { [ 138s] | ^~~~~~~~~~~~ [ 138s] dbdimp.h:139:1: warning: 'newUTF8SVpv' defined but not used [-Wunused-function] [ 138s] 139 | newUTF8SVpv(char *s, STRLEN len) { [ 138s] | ^~~~~~~~~~~ [ 141s] sqlite3.c: In function 'sqlite3DefaultRowEst': [ 141s] sqlite3.c:97173:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] [ 141s] 97173 | if( a[0]<33 ) a[0] = 33; assert( 33==sqlite3LogEst(10) ); [ 141s] | ^~ [ 141s] In file included from sqlite3.c:9670: [ 141s] sqlite3.c:97173:35: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' [ 141s] 97173 | if( a[0]<33 ) a[0] = 33; assert( 33==sqlite3LogEst(10) ); [ 141s] | ^~~~~~ [ 146s] sqlite3.c: In function 'whereRangeScanEst': [ 146s] sqlite3.c:124048:11: warning: this 'if' clause does not guard... [-Wmisleading-indentation] [ 146s] 124048 | if( iLwrIdx==iUprIdx ) nNew -= 20; assert( 20==sqlite3LogEst(4) ); [ 146s] | ^~ [ 146s] sqlite3.c:124048:47: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' [ 146s] 124048 | if( iLwrIdx==iUprIdx ) nNew -= 20; assert( 20==sqlite3LogEst(4) ); [ 146s] | ^~~~~~ [ 166s] sqlite3.c: In function 'sqlite3SelectNew': [ 166s] sqlite3.c:109810:10: warning: function may return address of local variable [-Wreturn-local-addr] [ 166s] 109810 | return pNew; [ 166s] | ^~~~ [ 166s] sqlite3.c:109778:10: note: declared here [ 166s] 109778 | Select standin; [ 166s] | ^~~~~~~ [ 196s] rm -f blib/arch/auto/DBD/SQLite/SQLite.so [ 196s] cc -shared -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -pipe -L/usr/local/lib -Wl,-Bsymbolic SQLite.o dbdimp.o sqlite3.o -o blib/arch/auto/DBD/SQLite/SQLite.so \ [ 196s] \ [ 196s] [ 196s] chmod 755 blib/arch/auto/DBD/SQLite/SQLite.so [ 199s] Manifying 7 pod documents [ 199s] + exit 0 [ 199s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.9e28DU [ 199s] + umask 022 [ 199s] + cd /home/abuild/rpmbuild/BUILD [ 199s] + cd DBD-SQLite-1.50 [ 199s] + LANG=C [ 199s] + export LANG [ 199s] + unset DISPLAY [ 199s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64 [ 199s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64 [ 199s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64 install_vendor [ 200s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644 [ 201s] Manifying 7 pod documents [ 201s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite.pm [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/Constants.pm [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite::VirtualTable.3 [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite::VirtualTable::PerlData.3 [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite.3 [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite::Fulltext_search.3 [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite::VirtualTable::FileContent.3 [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite::Constants.3 [ 201s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man/man3/DBD::SQLite::Cookbook.3 [ 201s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/perllocal.pod [ 202s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64 -a -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto [ 202s] + find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto -name .packlist -print0 [ 202s] + xargs -0 -r rm [ 202s] + '[' aarch64 == noarch ']' [ 202s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/perllocal.pod [ 202s] + FILES=perl-DBD-SQLite.files [ 202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f [ 202s] + RES= [ 202s] + '[' -n '' ']' [ 202s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ [ 202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ -type d [ 202s] ++ sort [ 202s] + for dir in '`find ${base_dir} -type d | sort`' [ 202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 202s] + continue [ 202s] + for dir in '`find ${base_dir} -type d | sort`' [ 202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi [ 202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 202s] + el=aarch64-linux-thread-multi [ 202s] + all_dir=(${all_dir[@]} $el) [ 202s] + for dir in '`find ${base_dir} -type d | sort`' [ 202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD [ 202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 202s] + el=aarch64-linux-thread-multi/DBD [ 202s] + all_dir=(${all_dir[@]} $el) [ 202s] + for dir in '`find ${base_dir} -type d | sort`' [ 202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite [ 202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 202s] + el=aarch64-linux-thread-multi/DBD/SQLite [ 202s] + all_dir=(${all_dir[@]} $el) [ 202s] + for dir in '`find ${base_dir} -type d | sort`' [ 202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable [ 202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 202s] + el=aarch64-linux-thread-multi/DBD/SQLite/VirtualTable [ 202s] + all_dir=(${all_dir[@]} $el) [ 202s] + for dir in '`find ${base_dir} -type d | sort`' [ 202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto [ 202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 202s] + el=aarch64-linux-thread-multi/auto [ 202s] + all_dir=(${all_dir[@]} $el) [ 202s] + for dir in '`find ${base_dir} -type d | sort`' [ 202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD [ 202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 202s] + el=aarch64-linux-thread-multi/auto/DBD [ 202s] + all_dir=(${all_dir[@]} $el) [ 202s] + for dir in '`find ${base_dir} -type d | sort`' [ 202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite [ 202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 202s] + el=aarch64-linux-thread-multi/auto/DBD/SQLite [ 202s] + all_dir=(${all_dir[@]} $el) [ 202s] + for dir in '`find ${base_dir} -type d | sort`' [ 202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share [ 202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 202s] + el=aarch64-linux-thread-multi/auto/share [ 202s] + all_dir=(${all_dir[@]} $el) [ 202s] + for dir in '`find ${base_dir} -type d | sort`' [ 202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist [ 202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 202s] + el=aarch64-linux-thread-multi/auto/share/dist [ 202s] + all_dir=(${all_dir[@]} $el) [ 202s] + for dir in '`find ${base_dir} -type d | sort`' [ 202s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 202s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite [ 202s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 202s] + el=aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite [ 202s] + all_dir=(${all_dir[@]} $el) [ 202s] + for i in '${all_dir[@]}' [ 202s] + '[' aarch64-linux-thread-multi = auto ']' [ 202s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 202s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi ']' [ 202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi -maxdepth 1 -type f [ 202s] + RES= [ 202s] + '[' -n '' ']' [ 202s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi [ 202s] + /bin/cat [ 202s] + for i in '${all_dir[@]}' [ 202s] + '[' aarch64-linux-thread-multi/DBD = auto ']' [ 202s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 202s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD ']' [ 202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD -maxdepth 1 -type f [ 202s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite.pm [ 202s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite.pm ']' [ 202s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD [ 202s] + /bin/cat [ 202s] + for file in '$RES' [ 202s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite.pm [ 202s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite.pm [ 202s] + /bin/cat [ 202s] + for i in '${all_dir[@]}' [ 202s] + '[' aarch64-linux-thread-multi/DBD/SQLite = auto ']' [ 202s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 202s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite ']' [ 202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite -maxdepth 1 -type f [ 202s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 202s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Constants.pm [ 202s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 202s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod' [ 202s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 202s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Constants.pm [ 202s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 202s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod' ']' [ 202s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite [ 202s] + /bin/cat [ 202s] + for file in '$RES' [ 202s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 202s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 202s] + /bin/cat [ 202s] + for file in '$RES' [ 202s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Constants.pm [ 202s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/Constants.pm [ 202s] + /bin/cat [ 202s] + for file in '$RES' [ 202s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 202s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 202s] + /bin/cat [ 202s] + for file in '$RES' [ 202s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod [ 202s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod [ 202s] + /bin/cat [ 202s] + for i in '${all_dir[@]}' [ 202s] + '[' aarch64-linux-thread-multi/DBD/SQLite/VirtualTable = auto ']' [ 202s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 202s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable ']' [ 202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable -maxdepth 1 -type f [ 202s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 202s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm' [ 202s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 202s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm' ']' [ 202s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable [ 202s] + /bin/cat [ 202s] + for file in '$RES' [ 202s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 202s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 202s] + /bin/cat [ 202s] + for file in '$RES' [ 202s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm [ 202s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm [ 202s] + /bin/cat [ 202s] + for i in '${all_dir[@]}' [ 202s] + '[' aarch64-linux-thread-multi/auto = auto ']' [ 202s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 202s] + continue [ 202s] + for i in '${all_dir[@]}' [ 202s] + '[' aarch64-linux-thread-multi/auto/DBD = auto ']' [ 202s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 202s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD ']' [ 202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD -maxdepth 1 -type f [ 202s] + RES= [ 202s] + '[' -n '' ']' [ 202s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD [ 202s] + /bin/cat [ 202s] + for i in '${all_dir[@]}' [ 202s] + '[' aarch64-linux-thread-multi/auto/DBD/SQLite = auto ']' [ 202s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 202s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD/SQLite ']' [ 202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD/SQLite -maxdepth 1 -type f [ 202s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 202s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD/SQLite/SQLite.so ']' [ 202s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite [ 202s] + /bin/cat [ 202s] + for file in '$RES' [ 202s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 202s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 202s] + /bin/cat [ 202s] + for i in '${all_dir[@]}' [ 202s] + '[' aarch64-linux-thread-multi/auto/share = auto ']' [ 202s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 202s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share ']' [ 202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share -maxdepth 1 -type f [ 202s] + RES= [ 202s] + '[' -n '' ']' [ 202s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share [ 202s] + /bin/cat [ 202s] + for i in '${all_dir[@]}' [ 202s] + '[' aarch64-linux-thread-multi/auto/share/dist = auto ']' [ 202s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 202s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist ']' [ 202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist -maxdepth 1 -type f [ 202s] + RES= [ 202s] + '[' -n '' ']' [ 202s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist [ 202s] + /bin/cat [ 202s] + for i in '${all_dir[@]}' [ 202s] + '[' aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite = auto ']' [ 202s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 202s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite ']' [ 202s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite -maxdepth 1 -type f [ 202s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 202s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 202s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h' [ 202s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 202s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 202s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h' ']' [ 202s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite [ 202s] + /bin/cat [ 202s] + for file in '$RES' [ 202s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 202s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 202s] + /bin/cat [ 202s] + for file in '$RES' [ 202s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 202s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 202s] + /bin/cat [ 202s] + for file in '$RES' [ 202s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h [ 202s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h [ 202s] + /bin/cat [ 202s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/man ']' [ 202s] + fgen_file '/usr/share/man/man?/*' [ 202s] + /bin/cat [ 202s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/var/adm/perl-modules/perl-DBD-SQLite ']' [ 202s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/bin ']' [ 202s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.50-1.1 --unique-debug-src-base perl-DBD-SQLite-1.50-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50 [ 203s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 203s] 14208 blocks [ 203s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/perl-DBD-SQLite-debuginfo.manifest [ 203s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/perl-DBD-SQLite-debugsource.manifest [ 204s] + /usr/lib/rpm/check-buildroot [ 204s] + /usr/lib/rpm//brp-compress [ 204s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 204s] + /usr/lib/rpm/brp-python-hardlink [ 204s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64 [ 204s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/isu.list [ 204s] ~/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64 ~/rpmbuild/BUILD/DBD-SQLite-1.50 [ 204s] ~/rpmbuild/BUILD/DBD-SQLite-1.50 [ 204s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 210s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.bnIuGM [ 210s] + umask 022 [ 210s] + cd /home/abuild/rpmbuild/BUILD [ 210s] + cd DBD-SQLite-1.50 [ 210s] + /bin/make test [ 211s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644 [ 211s] PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/**/*.t [ 213s] # $DBI::VERSION=1.628 [ 213s] # Compile Options: [ 213s] # ENABLE_COLUMN_METADATA [ 213s] # ENABLE_FTS3 [ 213s] # ENABLE_FTS3_PARENTHESIS [ 213s] # ENABLE_FTS4 [ 213s] # ENABLE_JSON1 [ 213s] # ENABLE_RTREE [ 213s] # ENABLE_STAT4 [ 213s] # SYSTEM_MALLOC [ 213s] # THREADSAFE=1 [ 213s] t/01_compile.t ........................................ ok [ 214s] # sqlite_version=3.10.2 [ 215s] t/02_logon.t .......................................... ok [ 216s] t/03_create_table.t ................................... ok [ 217s] t/04_insert.t ......................................... ok [ 218s] t/05_select.t ......................................... ok [ 219s] t/06_tran.t ........................................... ok [ 220s] t/07_error.t .......................................... ok [ 228s] t/08_busy.t ........................................... ok [ 229s] t/09_create_function.t ................................ ok [ 231s] t/10_create_aggregate.t ............................... ok [ 233s] t/12_unicode.t ........................................ ok [ 234s] t/13_create_collation.t ............................... ok [ 236s] t/14_progress_handler.t ............................... ok [ 238s] t/15_ak_dbd.t ......................................... ok [ 239s] t/16_column_info.t .................................... ok [ 240s] t/17_createdrop.t ..................................... ok [ 241s] t/18_insertfetch.t .................................... ok [ 243s] t/19_bindparam.t ...................................... ok [ 246s] t/20_blobs.t .......................................... ok [ 249s] t/21_blobtext.t ....................................... ok [ 251s] t/22_listfields.t ..................................... ok [ 254s] t/23_nulls.t .......................................... ok [ 255s] t/24_numrows.t ........................................ ok [ 259s] t/25_chopblanks.t ..................................... ok [ 260s] t/26_commit.t ......................................... ok [ 263s] t/27_metadata.t ....................................... ok [ 268s] t/28_schemachange.t ................................... ok [ 269s] t/30_auto_rollback.t .................................. ok [ 270s] t/31_bind_weird_number_param.t ........................ ok [ 271s] t/32_inactive_error.t ................................. ok [ 273s] t/33_non_latin_path.t ................................. ok [ 275s] t/34_online_backup.t .................................. ok [ 277s] t/35_table_info.t ..................................... ok [ 279s] t/36_hooks.t .......................................... ok [ 281s] t/37_regexp.t ......................................... ok [ 282s] t/38_empty_statement.t ................................ ok [ 284s] t/39_foreign_keys.t ................................... ok [ 285s] t/40_multiple_statements.t ............................ ok [ 287s] t/41_placeholders.t ................................... ok [ 289s] t/42_primary_key_info.t ............................... ok [ 290s] t/43_fts3.t ........................................... ok [ 291s] t/44_rtree.t .......................................... ok [ 292s] t/45_savepoints.t ..................................... ok [ 294s] t/46_mod_perl.t ....................................... skipped: requires APR::Table [ 296s] t/47_execute.t ........................................ ok [ 297s] t/48_bind_param_is_sticky.t ........................... ok [ 298s] t/49_trace_and_profile.t .............................. ok [ 300s] t/50_foreign_key_info.t ............................... ok [ 301s] t/51_table_column_metadata.t .......................... ok [ 302s] t/52_db_filename.t .................................... ok [ 303s] t/53_status.t ......................................... ok [ 304s] t/54_literal_txn.t .................................... ok [ 306s] t/55_statistics_info.t ................................ ok [ 307s] t/56_open_flags.t ..................................... ok [ 308s] t/57_uri_filename.t ................................... ok [ 309s] t/58_see_if_its_a_number_and_explicit_binding.t ....... ok [ 310s] t/59_extended_result_codes.t .......................... skipped: this test is for Win32 only [ 311s] t/60_readonly.t ....................................... ok [ 313s] t/61_strlike.t ........................................ ok [ 314s] t/cookbook_variance.t ................................. ok [ 315s] t/rt_106151_outermost_savepoint.t ..................... ok [ 316s] t/rt_106950_extra_warnings_with_savepoints.t .......... ok [ 318s] t/rt_15186_prepcached.t ............................... ok [ 319s] t/rt_21406_auto_finish.t .............................. ok [ 321s] t/rt_25371_asymmetric_unicode.t ....................... ok [ 322s] t/rt_25460_numeric_aggregate.t ........................ ok [ 323s] t/rt_25924_user_defined_func_unicode.t ................ ok [ 324s] t/rt_26775_distinct.t ................................. ok [ 325s] t/rt_27553_prepared_cache_and_analyze.t ............... ok [ 327s] t/rt_29058_group_by.t ................................. ok [ 328s] t/rt_29629_sqlite_where_length.t ...................... ok [ 329s] t/rt_31324_full_names.t ............................... ok [ 331s] t/rt_32889_prepare_cached_reexecute.t ................. ok [ 333s] t/rt_36836_duplicate_key.t ............................ ok [ 335s] t/rt_36838_unique_and_bus_error.t ..................... ok [ 336s] t/rt_40594_nullable.t ................................. ok [ 337s] t/rt_48393_debug_panic_with_commit.t .................. skipped: set $ENV{TEST_DBD_SQLITE_WITH_DEBUGGER} to enable this test [ 339s] t/rt_50503_fts3.t ..................................... ok [ 340s] t/rt_52573_manual_exclusive_lock.t .................... ok [ 341s] t/rt_53235_icu_compatibility.t ........................ skipped: requires SQLite ICU plugin to be enabled [ 343s] t/rt_62370_diconnected_handles_operation.t ............ ok [ 344s] t/rt_64177_ping_wipes_out_the_errstr.t ................ ok [ 345s] t/rt_67581_bind_params_mismatch.t ..................... ok [ 347s] t/rt_71311_bind_col_and_unicode.t ..................... ok [ 349s] t/rt_73159_fts_tokenizer_segfault.t ................... ok [ 351s] t/rt_73787_exponential_buffer_overflow.t .............. ok [ 356s] t/rt_76395_int_overflow.t ............................. ok [ 358s] t/rt_77724_primary_key_with_a_whitespace.t ............ ok [ 360s] t/rt_78833_utf8_flag_for_column_names.t ............... ok [ 363s] t/rt_81536_multi_column_primary_key_info.t ............ ok [ 365s] t/rt_88228_sqlite_3_8_0_crash.t ....................... ok [ 367s] t/rt_96050_db_filename_for_a_closed_database.t ........ ok [ 370s] t/rt_96877_unicode_statements.t ....................... ok [ 373s] t/rt_96878_fts_contentless_table.t .................... ok [ 376s] t/rt_97598_crash_on_disconnect_with_virtual_tables.t .. ok [ 379s] t/virtual_table/00_base.t ............................. ok [ 381s] t/virtual_table/01_destroy.t .......................... ok [ 384s] t/virtual_table/02_find_function.t .................... ok [ 385s] t/virtual_table/10_filecontent.t ...................... ok [ 388s] t/virtual_table/11_filecontent_fulltext.t ............. ok [ 389s] t/virtual_table/20_perldata.t ......................... ok [ 393s] t/virtual_table/21_perldata_charinfo.t ................ ok [ 396s] t/virtual_table/rt_99748.t ............................ ok [ 396s] All tests successful. [ 396s] Files=103, Tests=3561, 184 wallclock secs ( 3.19 usr 0.17 sys + 103.29 cusr 2.82 csys = 109.47 CPU) [ 396s] Result: PASS [ 396s] + exit 0 [ 396s] Processing files: perl-DBD-SQLite-1.50-1.1.aarch64 [ 396s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.4cmawB [ 396s] + umask 022 [ 396s] + cd /home/abuild/rpmbuild/BUILD [ 396s] + cd DBD-SQLite-1.50 [ 396s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/doc/packages/perl-DBD-SQLite [ 396s] + export LC_ALL=C [ 396s] + LC_ALL=C [ 396s] + export DOCDIR [ 396s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/doc/packages/perl-DBD-SQLite [ 396s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/doc/packages/perl-DBD-SQLite [ 396s] + cp -pr constants.inc /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/doc/packages/perl-DBD-SQLite [ 396s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/doc/packages/perl-DBD-SQLite [ 396s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64/usr/share/doc/packages/perl-DBD-SQLite [ 396s] + exit 0 [ 398s] Provides: perl(DBD::SQLite) = 1.50 perl(DBD::SQLite::Constants) perl(DBD::SQLite::VirtualTable) = 1.50 perl(DBD::SQLite::VirtualTable::Cursor) perl(DBD::SQLite::VirtualTable::FileContent) perl(DBD::SQLite::VirtualTable::FileContent::Cursor) perl(DBD::SQLite::VirtualTable::PerlData) perl(DBD::SQLite::VirtualTable::PerlData::Cursor) perl-DBD-SQLite = 1.50-1.1 perl-DBD-SQLite(aarch-64) = 1.50-1.1 [ 398s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 398s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.28)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.34)(64bit) [ 398s] Processing files: perl-DBD-SQLite-debugsource-1.50-1.1.aarch64 [ 398s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 398s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 398s] [ 398s] Provides: perl-DBD-SQLite-debugsource = 1.50-1.1 perl-DBD-SQLite-debugsource(aarch-64) = 1.50-1.1 [ 398s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 398s] Processing files: perl-DBD-SQLite-debuginfo-1.50-1.1.aarch64 [ 398s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 398s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 398s] [ 398s] Provides: perl-DBD-SQLite-debuginfo = 1.50-1.1 perl-DBD-SQLite-debuginfo(aarch-64) = 1.50-1.1 [ 398s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 398s] Recommends: perl-DBD-SQLite-debugsource(aarch-64) = 1.50-1.1 [ 398s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64 [ 398s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-DBD-SQLite-1.50-1.1.src.rpm [ 404s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-DBD-SQLite-1.50-1.1.aarch64.rpm [ 410s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-DBD-SQLite-debugsource-1.50-1.1.aarch64.rpm [ 414s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-DBD-SQLite-debuginfo-1.50-1.1.aarch64.rpm [ 414s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.apwHMP [ 414s] + umask 022 [ 414s] + cd /home/abuild/rpmbuild/BUILD [ 414s] + cd DBD-SQLite-1.50 [ 414s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.aarch64 [ 414s] + exit 0 [ 415s] ... checking for files with abuild user/group [ 415s] ... creating baselibs [ 416s] [ 416s] 86c5bb0bb39f finished "build perl-DBD-SQLite.spec" at Fri Dec 13 10:17:35 UTC 2024. [ 416s] Retried build at Tue Dec 17 15:54:33 2024 returned same result, skipped