[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 1s] [ 1s] 86c5bb0bb39f started "build python3-nose.spec" at Fri Dec 13 09:37:52 UTC 2024. [ 1s] [ 1s] Building python3-nose for project 'Tizen-Base' repository 'standard' arch 'aarch64' srcmd5 '21fabebcca7f55a09c8b45ef1a2586c3' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build-srcdir/python3-nose.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build-srcdir/python3-nose.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build-srcdir/python3-nose.spec build ... [ 2s] registering binfmt handlers for cross build [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/42] preinstalling libmagic-data... [ 3s] [2/42] preinstalling libncurses... [ 3s] [3/42] preinstalling setup... [ 3s] [4/42] preinstalling filesystem... [ 3s] [5/42] preinstalling glibc... [ 3s] [6/42] preinstalling bash... [ 3s] [7/42] preinstalling diffutils... [ 3s] [8/42] preinstalling grep... [ 3s] [9/42] preinstalling libattr... [ 3s] [10/42] preinstalling libblkid... [ 3s] [11/42] preinstalling libbz2... [ 3s] [12/42] preinstalling libfreebl3... [ 3s] [13/42] preinstalling libgcc... [ 4s] [14/42] preinstalling liblua... [ 4s] [15/42] preinstalling liblzma... [ 4s] [16/42] preinstalling libpopt... [ 4s] [17/42] preinstalling libreadline... [ 4s] [18/42] preinstalling libsmack... [ 4s] [19/42] preinstalling libsqlite... [ 4s] [20/42] preinstalling libuuid... [ 4s] [21/42] preinstalling libxcrypt... [ 4s] [22/42] preinstalling libzstd1... [ 4s] [23/42] preinstalling nspr... [ 4s] [24/42] preinstalling sed... [ 5s] [25/42] preinstalling zlib... [ 5s] [26/42] preinstalling qemu-accel-x86_64-aarch64... [ 22s] [27/42] preinstalling qemu-linux-user-x86_64-cross... [ 26s] [28/42] preinstalling coreutils... [ 27s] [29/42] preinstalling libacl... [ 27s] [30/42] preinstalling libcap... [ 27s] [31/42] preinstalling libelf... [ 27s] [32/42] preinstalling libmount... [ 27s] [33/42] preinstalling smack... [ 27s] [34/42] preinstalling bzip2... [ 27s] [35/42] preinstalling libmagic... [ 27s] [36/42] preinstalling libxml2... [ 27s] [37/42] preinstalling tar... [ 27s] [38/42] preinstalling util-linux... [ 27s] [39/42] preinstalling util-linux-su... [ 27s] [40/42] preinstalling nss... [ 27s] [41/42] preinstalling libsoftokn3... [ 28s] [42/42] preinstalling rpm... [ 28s] running qemu-linux-user-x86_64-cross postinstall script [ 28s] running qemu-accel-x86_64-aarch64 postinstall script [ 28s] mv: cannot stat `/usr/lib64/gcc/aarch64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 28s] running setup postinstall script [ 28s] chroot: failed to run command '': No such file or directory [ 28s] initializing rpm db... [ 29s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 29s] breaking dependency libxcrypt-devel -> glibc-devel [ 29s] cycle: libsoftokn3 -> nss [ 29s] breaking dependency nss -> libsoftokn3 [ 29s] done [ 29s] querying package ids... [ 29s] [1/106] cumulate libmagic-data-5.45-1.3 [ 29s] [2/106] cumulate setup-0.9-1.11 [ 29s] [3/106] cumulate filesystem-3.1-1.1 [ 29s] [4/106] cumulate glibc-2.39-1.6 [ 29s] [5/106] cumulate bash-3.2.57-1.1 [ 29s] [6/106] cumulate cpio-2.8-1.2 [ 29s] [7/106] cumulate diffutils-3.10-1.1 [ 29s] [8/106] cumulate findutils-4.3.8-1.4 [ 29s] [9/106] cumulate gdbm-1.8.3-1.6 [ 29s] [10/106] cumulate hostname-3.23-1.2 [ 29s] [11/106] cumulate libatomic-14.2.0-1.6 [ 29s] [12/106] cumulate libattr-2.5.1-1.4 [ 29s] [13/106] cumulate libblkid-2.39.3-1.4 [ 29s] [14/106] cumulate libbz2-1.0.8-1.4 [ 29s] [15/106] cumulate libexpat-2.6.2-1.5 [ 29s] [16/106] cumulate libffi-3.4.2-1.5 [ 29s] [17/106] cumulate libfreebl3-3.98-1.5 [ 29s] [18/106] cumulate libgcc-14.2.0-1.6 [ 29s] [19/106] cumulate libgomp-14.2.0-1.6 [ 29s] [20/106] cumulate libitm-14.2.0-1.6 [ 29s] [21/106] cumulate libltdl-2.4.7-1.6 [ 29s] [22/106] cumulate liblua-5.1.5-1.4 [ 29s] [23/106] cumulate liblzma-5.4.5-1.6 [ 29s] [24/106] cumulate libopenssl3-3.0.13-1.6 [ 29s] [25/106] cumulate libpcre-8.45-1.4 [ 29s] [26/106] cumulate libpopt-1.16-1.3 [ 29s] [27/106] cumulate libpython3_121_0-3.12.0-1.5 [ 29s] [28/106] cumulate libsmack-1.3.1-1.3 [ 29s] [29/106] cumulate libsmartcols-2.39.3-1.4 [ 29s] [30/106] cumulate libsqlite-3.44.0-1.4 [ 29s] [31/106] cumulate libuuid-2.39.3-1.4 [ 29s] [32/106] cumulate libxcrypt-4.4.36-1.5 [ 29s] [33/106] cumulate libzstd1-1.5.5-1.5 [ 29s] [34/106] cumulate m4-1.4.19-1.1 [ 29s] [35/106] cumulate net-tools-2.0_20121208git-1.3 [ 29s] [36/106] cumulate nspr-4.35-1.4 [ 29s] [37/106] cumulate patch-2.7.6-1.3 [ 29s] [38/106] cumulate pkg-config-0.29.2-1.4 [ 29s] [39/106] cumulate sed-4.1c-1.4 [ 29s] [40/106] cumulate update-alternatives-1.22.2-1.1 [ 29s] [41/106] cumulate which-2.17-1.2 [ 29s] [42/106] cumulate zlib-1.3-1.5 [ 29s] [43/106] cumulate build-compare-2023.06.18-1.11 [ 29s] [44/106] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 29s] [45/106] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 29s] [46/106] cumulate binutils-libs-2.43-1.6 [ 29s] [47/106] cumulate coreutils-6.9-14.9 [ 29s] [48/106] cumulate cpp-14.2.0-1.6 [ 29s] [49/106] cumulate gawk-3.1.5-1.2 [ 29s] [50/106] cumulate gcc-c++-14.2.0-1.6 [ 29s] [51/106] cumulate grep-2.5.2-1.3 [ 29s] [52/106] cumulate libacl-2.3.2-1.4 [ 29s] [53/106] cumulate libcap-2.69-1.4 [ 29s] [54/106] cumulate libelf-0.189-1.6 [ 29s] [55/106] cumulate libgfortran-14.2.0-1.6 [ 29s] [56/106] cumulate libmount-2.39.3-1.4 [ 29s] [57/106] cumulate libstdc++-14.2.0-1.6 [ 29s] [58/106] cumulate make-4.4-1.4 [ 29s] [59/106] cumulate nss-certs-3.98-1.5 [ 29s] [60/106] cumulate smack-1.3.1-1.3 [ 29s] [61/106] cumulate bzip2-1.0.8-1.4 [ 29s] [62/106] cumulate libfdisk-2.39.3-1.4 [ 29s] [63/106] cumulate libmagic-5.45-1.3 [ 29s] [64/106] cumulate libxml2-2.12.5-1.5 [ 29s] [65/106] cumulate xz-5.4.5-1.6 [ 29s] [66/106] cumulate perl-5.38.0-1.5 [ 29s] [67/106] cumulate build-mkbaselibs-20120927-1.1 [ 29s] [68/106] cumulate libstdc++-devel-14.2.0-1.6 [ 29s] [69/106] cumulate linux-glibc-devel-6.6-1.5 [ 29s] [70/106] cumulate file-5.45-1.3 [ 29s] [71/106] cumulate tar-1.17-1.1 [ 29s] [72/106] cumulate terminfo-base-full-6.4-1.6 [ 29s] [73/106] cumulate autoconf-2.71-1.5 [ 29s] [74/106] cumulate glibc-locale-2.39-1.6 [ 29s] [75/106] cumulate gzip-1.3.12-1.3 [ 29s] [76/106] cumulate libcc1-14.2.0-1.6 [ 29s] [77/106] cumulate libhwasan-14.2.0-1.6 [ 29s] [78/106] cumulate libubsan-14.2.0-1.6 [ 29s] [79/106] cumulate binutils-2.43-1.6 [ 29s] [80/106] cumulate pam-1.1.6-1.3 [ 29s] [81/106] cumulate tzdata-2023c-1.1 [ 29s] [82/106] cumulate libdw-0.189-1.6 [ 29s] [83/106] cumulate libarchive-3.7.2-1.5 [ 29s] [84/106] cumulate automake-1.16.5-1.5 [ 29s] [85/106] cumulate libasm-0.189-1.6 [ 29s] [86/106] cumulate libncurses6-6.4-1.6 [ 29s] [87/106] cumulate build-20120927-1.1 [ 29s] [88/106] cumulate gcc-14.2.0-1.6 [ 29s] [89/106] cumulate libncurses-6.4-1.6 [ 29s] [90/106] cumulate less-643-1.1 [ 29s] [91/106] cumulate libreadline-5.2-1.4 [ 29s] [92/106] cumulate qemu-accel-x86_64-aarch64-0.4-1.1 [ 29s] [93/106] cumulate libtool-2.4.7-1.6 [ 29s] [94/106] cumulate elfutils-0.189-1.6 [ 29s] [95/106] cumulate python3-base-3.12.0-1.5 [ 29s] [96/106] cumulate util-linux-2.39.3-1.4 [ 29s] [97/106] cumulate python3-3.12.0-1.1 [ 29s] [98/106] cumulate util-linux-su-2.39.3-1.4 [ 29s] [99/106] cumulate python3-devel-3.12.0-1.5 [ 29s] [100/106] cumulate python3-setuptools-69.0.2-1.1 [ 29s] [101/106] cumulate libxcrypt-devel-4.4.36-1.5 [ 29s] [102/106] cumulate nss-3.98-1.5 [ 30s] [103/106] cumulate glibc-devel-2.39-1.6 [ 30s] [104/106] cumulate libsoftokn3-3.98-1.5 [ 30s] [105/106] cumulate rpm-4.14.1.1-1.5 [ 30s] [106/106] cumulate rpm-build-4.14.1.1-1.5 [ 30s] now installing cumulated packages [ 33s] Preparing... ######################################## [ 33s] Updating / installing... [ 34s] setup-0.9-1.11 ######################################## [ 34s] filesystem-3.1-1.1 ######################################## [ 35s] glibc-2.39-1.6 ######################################## [ 35s] bash-3.2.57-1.1 ######################################## [ 35s] zlib-1.3-1.5 ######################################## [ 36s] libgcc-14.2.0-1.6 ######################################## [ 36s] libstdc++-14.2.0-1.6 ######################################## [ 38s] coreutils-6.9-14.9 ######################################## [ 38s] libbz2-1.0.8-1.4 ######################################## [ 39s] liblzma-5.4.5-1.6 ######################################## [ 39s] libelf-0.189-1.6 ######################################## [ 39s] libxcrypt-4.4.36-1.5 ######################################## [ 40s] libdw-0.189-1.6 ######################################## [ 40s] libblkid-2.39.3-1.4 ######################################## [ 41s] nspr-4.35-1.4 ######################################## [ 41s] pam-1.1.6-1.3 ######################################## [ 42s] libcap-2.69-1.4 ######################################## [ 42s] gdbm-1.8.3-1.6 ######################################## [ 47s] perl-5.38.0-1.5 ######################################## [ 48s] libfreebl3-3.98-1.5 ######################################## [ 48s] liblua-5.1.5-1.4 ######################################## [ 49s] libopenssl3-3.0.13-1.6 ######################################## [ 49s] libpopt-1.16-1.3 ######################################## [ 50s] libpython3_121_0-3.12.0-1.5 ######################################## [ 50s] libsqlite-3.44.0-1.4 ######################################## [ 50s] libuuid-2.39.3-1.4 ######################################## [ 51s] libzstd1-1.5.5-1.5 ######################################## [ 51s] pkg-config-0.29.2-1.4 ######################################## [ 51s] libfdisk-2.39.3-1.4 ######################################## [ 51s] build-mkbaselibs-20120927-1.1 ######################################## [ 51s] nss-certs-3.98-1.5 ######################################## [ 51s] libsoftokn3-3.98-1.5 ######################################## [ 52s] nss-3.98-1.5 ######################################## [ 52s] libmount-2.39.3-1.4 ######################################## [ 52s] libasm-0.189-1.6 ######################################## [ 52s] libxml2-2.12.5-1.5 ######################################## [ 53s] xz-5.4.5-1.6 ######################################## [ 53s] bzip2-1.0.8-1.4 ######################################## [ 53s] linux-glibc-devel-6.6-1.5 ######################################## [ 53s] terminfo-base-full-6.4-1.6 ######################################## [ 54s] libncurses6-6.4-1.6 ######################################## [ 54s] libreadline-5.2-1.4 ######################################## [ 55s] gzip-1.3.12-1.3 ######################################## [ 55s] libcc1-14.2.0-1.6 ######################################## [ 55s] libhwasan-14.2.0-1.6 ######################################## [ 55s] libubsan-14.2.0-1.6 ######################################## [ 56s] libgfortran-14.2.0-1.6 ######################################## [ 56s] binutils-libs-2.43-1.6 ######################################## [ 57s] binutils-2.43-1.6 ######################################## [ 57s] make-4.4-1.4 ######################################## [ 58s] findutils-4.3.8-1.4 ######################################## [ 58s] libatomic-14.2.0-1.6 ######################################## [ 58s] libattr-2.5.1-1.4 ######################################## [ 58s] libacl-2.3.2-1.4 ######################################## [ 59s] tar-1.17-1.1 ######################################## [ 59s] libarchive-3.7.2-1.5 ######################################## [ 59s] libexpat-2.6.2-1.5 ######################################## [ 60s] libffi-3.4.2-1.5 ######################################## [ 62s] python3-base-3.12.0-1.5 ######################################## [ 62s] python3-3.12.0-1.1 ######################################## [ 62s] libgomp-14.2.0-1.6 ######################################## [ 62s] libitm-14.2.0-1.6 ######################################## [ 67s] gcc-14.2.0-1.6 ######################################## [ 67s] libxcrypt-devel-4.4.36-1.5 ######################################## [ 68s] glibc-devel-2.39-1.6 ######################################## [ 68s] libltdl-2.4.7-1.6 ######################################## [ 68s] libpcre-8.45-1.4 ######################################## [ 69s] libsmack-1.3.1-1.3 ######################################## [ 69s] libsmartcols-2.39.3-1.4 ######################################## [ 69s] m4-1.4.19-1.1 ######################################## [ 69s] autoconf-2.71-1.5 ######################################## [ 70s] automake-1.16.5-1.5 ######################################## [ 70s] patch-2.7.6-1.3 ######################################## [ 70s] sed-4.1c-1.4 ######################################## [ 73s] util-linux-2.39.3-1.4 ######################################## [ 73s] libmagic-data-5.45-1.3 ######################################## [ 73s] libmagic-5.45-1.3 ######################################## [ 75s] rpm-4.14.1.1-1.5 ######################################## [ 75s] rpm-build-4.14.1.1-1.5 ######################################## [ 75s] file-5.45-1.3 ######################################## [ 75s] util-linux-su-2.39.3-1.4 ######################################## [ 75s] libtool-2.4.7-1.6 ######################################## [ 76s] smack-1.3.1-1.3 ######################################## [ 76s] grep-2.5.2-1.3 ######################################## [ 97s] qemu-accel-x86_64-aarch64-0.4-1.1 ######################################## [ 98s] python3-setuptools-69.0.2-1.1 ######################################## [ 98s] python3-devel-3.12.0-1.5 ######################################## [ 98s] build-20120927-1.1 ######################################## [ 98s] libncurses-6.4-1.6 ######################################## [ 98s] less-643-1.1 ######################################## [ 98s] elfutils-0.189-1.6 ######################################## [ 100s] glibc-locale-2.39-1.6 ######################################## [ 100s] tzdata-2023c-1.1 ######################################## [ 103s] libstdc++-devel-14.2.0-1.6 ######################################## [ 106s] cpp-14.2.0-1.6 ######################################## [ 109s] gcc-c++-14.2.0-1.6 ######################################## [ 109s] build-compare-2023.06.18-1.11 ######################################## [ 109s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 119s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 119s] gawk-3.1.5-1.2 ######################################## [ 119s] cpio-2.8-1.2 ######################################## [ 120s] diffutils-3.10-1.1 ######################################## [ 120s] hostname-3.23-1.2 ######################################## [ 120s] net-tools-2.0_20121208git-1.3 ######################################## [ 120s] update-alternatives-1.22.2-1.1 ######################################## [ 120s] which-2.17-1.2 ######################################## [ 120s] now finalizing build dir... [ 121s] ----------------------------------------------------------------- [ 121s] I have the following modifications for python3-nose.spec: [ 121s] 4c4 [ 121s] < Release: 0 [ 121s] --- [ 121s] > Release: 1.1 [ 121s] build target is aarch64-tizen-linux [ 121s] ----------------------------------------------------------------- [ 121s] ----- building python3-nose.spec (user abuild) [ 121s] ----------------------------------------------------------------- [ 121s] ----------------------------------------------------------------- [ 121s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/21fabebcca7f55a09c8b45ef1a2586c3-python3-nose' /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 121s] Building target platforms: aarch64-tizen-linux [ 121s] Building for target aarch64-tizen-linux [ 121s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.mYlhHa [ 121s] + umask 022 [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + rm -rf nose-1.2.1 [ 121s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/nose-1.2.1.tar.gz [ 121s] + /bin/tar -xof - [ 122s] + STATUS=0 [ 122s] + '[' 0 -ne 0 ']' [ 122s] + cd nose-1.2.1 [ 122s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 122s] + cp /home/abuild/rpmbuild/SOURCES/python3-nose.manifest . [ 122s] + sed -i s,man/man1,share/man/man1, setup.py [ 122s] + exit 0 [ 122s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.paNCBe [ 122s] + umask 022 [ 122s] + cd /home/abuild/rpmbuild/BUILD [ 122s] + cd nose-1.2.1 [ 122s] + ref=/usr/lib/rpm [ 122s] + mints=0 [ 122s] + case $(uname -m) in [ 122s] ++ uname -m [ 122s] + mints=20120610 [ 122s] + for s in guess sub [ 122s] ++ find -maxdepth 8 -name config.guess [ 122s] + for s in guess sub [ 122s] ++ find -maxdepth 8 -name config.sub [ 122s] + LANG=C [ 122s] + export LANG [ 122s] + unset DISPLAY [ 122s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 122s] + export CFLAGS [ 122s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 122s] + export CXXFLAGS [ 122s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 122s] + export FFLAGS [ 122s] + LDFLAGS= [ 122s] + export LDFLAGS [ 122s] + /usr/bin/python3 setup.py build [ 122s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:53: SyntaxWarning: invalid escape sequence '\(' [ 122s] "sys.exit\(\n" [ 122s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:54: SyntaxWarning: invalid escape sequence '\(' [ 122s] " load_entry_point\(([^\)]+)\)\(\)\n" [ 122s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:55: SyntaxWarning: invalid escape sequence '\)' [ 122s] "\)\n") [ 124s] + exit 0 [ 124s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.DOH71y [ 124s] + umask 022 [ 124s] + cd /home/abuild/rpmbuild/BUILD [ 124s] + cd nose-1.2.1 [ 124s] + LANG=C [ 124s] + export LANG [ 124s] + unset DISPLAY [ 124s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 124s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 124s] + /usr/bin/python3 setup.py install --prefix=/usr --root=/home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 124s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:53: SyntaxWarning: invalid escape sequence '\(' [ 124s] "sys.exit\(\n" [ 124s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:54: SyntaxWarning: invalid escape sequence '\(' [ 124s] " load_entry_point\(([^\)]+)\)\(\)\n" [ 124s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:55: SyntaxWarning: invalid escape sequence '\)' [ 124s] "\)\n") [ 125s] /usr/lib/python3.12/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. [ 125s] !! [ 125s] [ 125s] ******************************************************************************** [ 125s] Please avoid running ``setup.py`` directly. [ 125s] Instead, use pypa/build, pypa/installer or other [ 125s] standards-based tools. [ 125s] [ 125s] See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. [ 125s] ******************************************************************************** [ 125s] [ 125s] !! [ 125s] self.initialize_options() [ 125s] File "/usr/lib/python3.12/site-packages/nose/ext/dtcompat.py", line 344 [ 125s] raise TypeError, 'Expected a module: %r' % module [ 125s] ^ [ 125s] SyntaxError: invalid syntax [ 125s] [ 125s] File "/usr/lib/python3.12/site-packages/nose/failure.py", line 37 [ 125s] raise self.exc_class, self.exc_val, self.tb [ 125s] ^ [ 125s] SyntaxError: invalid syntax [ 125s] [ 125s] File "/usr/lib/python3.12/site-packages/nose/twistedtools.py", line 169 [ 125s] raise exc_type, exc_value, tb [ 125s] ^ [ 125s] SyntaxError: invalid syntax [ 125s] [ 125s] File "/usr/lib/python3.12/site-packages/nose/inspector.py", line 41 [ 125s] except tokenize.TokenError, e: [ 125s] ^^^^^^^^^^^^^^^^^^^^^^ [ 125s] SyntaxError: multiple exception types must be parenthesized [ 125s] [ 125s] File "/usr/lib/python3.12/site-packages/nose/core.py", line 143 [ 125s] print "%s version %s" % (os.path.basename(sys.argv[0]), __version__) [ 125s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 125s] SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)? [ 125s] [ 125s] File "/usr/lib/python3.12/site-packages/nose/plugins/plugintest.py", line 407 [ 125s] print munge_nose_output_for_doctest(out) [ 125s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 125s] SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)? [ 125s] [ 126s] File "/usr/lib/python3.12/site-packages/nose/plugins/doctests.py", line 277 [ 126s] except ImportError, e: [ 126s] ^^^^^^^^^^^^^^ [ 126s] SyntaxError: multiple exception types must be parenthesized [ 126s] [ 126s] File "/usr/lib/python3.12/site-packages/nose/plugins/multiprocess.py", line 466 [ 126s] except (KeyboardInterrupt, SystemExit), e: [ 126s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 126s] SyntaxError: multiple exception types must be parenthesized [ 126s] [ 126s] File "/usr/lib/python3.12/site-packages/nose/plugins/manager.py", line 390 [ 126s] except Exception, e: [ 126s] ^^^^^^^^^^^^ [ 126s] SyntaxError: multiple exception types must be parenthesized [ 126s] [ 126s] File "/usr/lib/python3.12/site-packages/nose/plugins/base.py", line 70 [ 126s] except OptionConflictError, e: [ 126s] ^^^^^^^^^^^^^^^^^^^^^^ [ 126s] SyntaxError: multiple exception types must be parenthesized [ 126s] [ 126s] File "/usr/lib/python3.12/site-packages/nose/config.py", line 66 [ 126s] except ConfigParser.Error, exc: [ 126s] ^^^^^^^^^^^^^^^^^^^^^^^ [ 126s] SyntaxError: multiple exception types must be parenthesized [ 126s] [ 126s] no previously-included directories found matching 'doc/.build' [ 126s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.2.1-1.1 --unique-debug-src-base python3-nose-1.2.1-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/nose-1.2.1 [ 126s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/nose-1.2.1/python3-nose-debuginfo.manifest [ 126s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/nose-1.2.1/python3-nose-debugsource.manifest [ 126s] + /usr/lib/rpm/check-buildroot [ 126s] + /usr/lib/rpm//brp-compress [ 126s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 127s] + /usr/lib/rpm/brp-python-hardlink [ 129s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 129s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/nose-1.2.1/isu.list [ 129s] ~/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 ~/rpmbuild/BUILD/nose-1.2.1 [ 129s] ~/rpmbuild/BUILD/nose-1.2.1 [ 129s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 129s] error: Unable to open /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 129s] /home/abuild/rpmbuild/SOURCES/python-nose.spec: No such file or directory [ 129s] error: query of specfile /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 129s] /home/abuild/rpmbuild/SOURCES/python-nose.spec failed, can't parse [ 129s] error: Unable to open /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 129s] /home/abuild/rpmbuild/SOURCES/python-nose.spec: No such file or directory [ 129s] error: query of specfile /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 129s] /home/abuild/rpmbuild/SOURCES/python-nose.spec failed, can't parse [ 129s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.lSY4p1 [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd nose-1.2.1 [ 129s] + exit 0 [ 129s] Processing files: python3-nose-1.2.1-1.1.noarch [ 129s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 129s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 129s] [ 129s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.5L212g [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd nose-1.2.1 [ 129s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 129s] + export LC_ALL=C [ 129s] + LC_ALL=C [ 129s] + export DOCDIR [ 129s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 129s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 129s] + cp -pr README.txt /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 129s] + cp -pr lgpl.txt /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 129s] + exit 0 [ 130s] Provides: python3-nose = 1.2.1-1.1 [ 130s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 130s] Requires: /usr/bin/python3 [ 130s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 130s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-nose-1.2.1-1.1.src.rpm [ 131s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-nose-1.2.1-1.1.noarch.rpm [ 131s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.AoMJjt [ 131s] + umask 022 [ 131s] + cd /home/abuild/rpmbuild/BUILD [ 131s] + cd nose-1.2.1 [ 131s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 131s] + exit 0 [ 131s] ... checking for files with abuild user/group [ 131s] ... creating baselibs [ 131s] [ 131s] 86c5bb0bb39f finished "build python3-nose.spec" at Fri Dec 13 09:40:03 UTC 2024. [ 131s] Retried build at Tue Dec 17 14:28:56 2024 returned same result, skipped