Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_6 Using BUILD_ARCH=armv7el w08 started "build wpasupplicant.spec" at Fri Feb 15 20:56:48 UTC 2013. Building wpasupplicant for project 'Tizen:2.0:Main' repository 'standard' arch 'armv7el' srcmd5 'e332c03c0a4fa1cee8c0e67ac9caf93f' processing specfile /srv/build/root_6/.build-srcdir/wpasupplicant.spec ... running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/wpasupplicant.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/wpasupplicant.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/55] preinstalling nss... [2/55] preinstalling libfile-x86-arm... [3/55] preinstalling elfutils-libelf-x86-arm... [4/55] preinstalling nss-softokn-freebl-x86-arm... [5/55] preinstalling nss-x86-arm... [6/55] preinstalling nspr-x86-arm... [7/55] preinstalling libgcc-x86-arm... [8/55] preinstalling libacl-x86-arm... [9/55] preinstalling libattr-x86-arm... [10/55] preinstalling libcap-x86-arm... [11/55] preinstalling liblua-x86-arm... [12/55] preinstalling popt-x86-arm... [13/55] preinstalling xz-libs-x86-arm... [14/55] preinstalling zlib-x86-arm... [15/55] preinstalling file... [16/55] preinstalling sqlite-x86-arm... [17/55] preinstalling mpfr-x86-arm... [18/55] preinstalling gmp-x86-arm... [19/55] preinstalling mpc-x86-arm... [20/55] preinstalling bzip2-libs-x86-arm... [21/55] preinstalling rpm-x86-arm... [22/55] preinstalling rpm-libs-x86-arm... [23/55] preinstalling tizen-accelerator... [24/55] preinstalling eglibc-x86-arm... [25/55] preinstalling ncurses-libs-x86-arm... [26/55] preinstalling bash-x86-arm... [27/55] preinstalling rpm... [28/55] preinstalling rpm-libs... [29/55] preinstalling setup... [30/55] preinstalling filesystem... [31/55] preinstalling bash... [32/55] preinstalling bzip2... [33/55] preinstalling coreutils... [34/55] preinstalling diffutils... [35/55] preinstalling liblua... [36/55] preinstalling eglibc... [37/55] preinstalling eglibc-common... [38/55] preinstalling libacl... [39/55] preinstalling libattr... [40/55] preinstalling libgcc... [41/55] preinstalling libcap... [42/55] preinstalling popt... [43/55] preinstalling readline... [44/55] preinstalling sed... [45/55] preinstalling tar... [46/55] preinstalling zlib... [47/55] preinstalling sqlite... [48/55] preinstalling ncurses-libs... [49/55] preinstalling elfutils-libelf... [50/55] preinstalling bzip2-libs... [51/55] preinstalling libstdc++... [52/55] preinstalling libfile... [53/55] preinstalling xz-libs... [54/55] preinstalling nspr... [55/55] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: dbus -> dbus-libs breaking dependency dbus -> dbus-libs cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/155] [2/155] installing kernel-headers-2.6.36-1.1 [3/155] installing libX11-common-1.5.0-2.1 [4/155] installing tizen-release-2.0.0-1.1 [5/155] installing tzdata-2011h-1.1 [6/155] installing libgcc-4.5.3-1.3 [7/155] installing setup-0.1-1.1 [8/155] installing filesystem-0.1-1.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [9/155] installing eglibc-2.13-1.8 [10/155] installing eglibc-common-2.13-1.8 warning: %post(eglibc-common-2.13-1.8.armv7l) scriptlet failed, exit status 255 [11/155] installing bash-4.1-3.1 [12/155] installing bzip2-libs-1.0.5-4.2 [13/155] installing cpio-2.8-3.1 [14/155] installing diffutils-3.0-3.1 [15/155] installing e2fsprogs-libs-1.41.9-2.2 [16/155] installing elfutils-libelf-0.152-1.8 [17/155] installing expat-2.0.1-8.2 [18/155] installing fdupes-1.40-42.1 [19/155] installing findutils-4.2.31-1.1 [20/155] installing gdbm-1.8.3-2.1 [21/155] installing libXau-1.0.7-1.1 [22/155] installing libattr-2.4.44-7.4 [23/155] installing libgomp-4.5.3-1.3 [24/155] installing libidn-1.15-1.2 [25/155] installing liblua-5.1.4-6.2 [26/155] installing libnl2-2.0-2.1 [27/155] installing libstdc++-4.5.3-1.3 [28/155] installing libuuid-2.20.2-1.1 [29/155] installing lzo-2.03-1.1 [30/155] installing m4-1.4.14-1.1 [31/155] installing net-tools-1.60-88.1 [32/155] installing nspr-4.9-1.5 [33/155] installing nss-softokn-freebl-3.12.9-5.9 [34/155] installing patch-2.6-1.1 [35/155] installing pkgconfig-0.25-2.2 [36/155] installing popt-1.16-3.2 [37/155] installing readline-5.2-13.1 [38/155] installing sed-4.1.5-2.1 [39/155] installing smack-1.0slp2+s7-1.2 [40/155] installing sqlite-3.7.13-1.1 [41/155] installing xz-libs-5.0.3-1.2 [42/155] installing zlib-1.2.5-2.8 [43/155] installing ncurses-libs-5.7-4.2 [44/155] installing build-compare-2009.10.14-26.2 [45/155] installing libstdc++-devel-4.5.3-1.3 [46/155] installing eglibc-headers-2.13-1.8 [47/155] installing libcap-2.21-1.2 [48/155] installing libnl2-devel-2.0-2.1 [49/155] installing unzip-6.0-9.3 [50/155] installing zlib-devel-1.2.5-2.8 [51/155] installing c-ares-1.7.4-1.2 [52/155] installing gmp-5.0.1-1.2 [53/155] installing libacl-2.2.49-1.2 [54/155] installing libfile-5.04-1.2 [55/155] installing libpcre-7.9-1.3 [56/155] installing libxcb-1.8.1-1.1 [57/155] installing lzo-minilzo-2.03-1.1 [58/155] installing make-3.82-152.2 [59/155] installing ncurses-5.7-4.2 [60/155] installing openssl-1.0.1c-1.9 [61/155] installing binutils-2.22-1.2 [62/155] installing bzip2-1.0.5-4.2 [63/155] installing libblkid-2.20.2-1.1 [64/155] installing xz-5.0.3-1.2 [65/155] installing elfutils-libs-0.152-1.8 [66/155] installing nss-3.12.9-5.9 [67/155] installing perl-5.12.1-61.3 [68/155] installing ncurses-base-5.7-4.2 [69/155] installing perl-HTML-Tagset-3.20-8.1 [70/155] installing perl-IO-Compress-Base-2.008-61.3 [71/155] installing perl-Module-Pluggable-3.60-61.3 [72/155] installing perl-Pod-Escapes-1.04-61.3 [73/155] installing perl-TimeDate-1.20-1.1 [74/155] installing eglibc-devel-2.13-1.8 [75/155] installing openssl-devel-1.0.1c-1.9 [76/155] installing grep-2.5.1a-63.1 [77/155] installing lzo-devel-2.03-1.1 [78/155] installing mpfr-3.0.0-1.2 [79/155] installing perl-Compress-Raw-Zlib-2.008-61.3 [80/155] installing perl-devel-5.12.1-61.3 [81/155] installing perl-libs-5.12.1-61.3 [82/155] installing tar-1.17-3.2 [83/155] installing coreutils-6.9-9.4 [84/155] installing file-5.04-1.2 [85/155] installing libX11-1.5.0-2.1 [86/155] installing libmount-2.20.2-1.1 [87/155] installing xz-lzma-compat-5.0.3-1.2 [88/155] installing elfutils-0.152-1.8 [89/155] installing nss-sysinit-3.12.9-5.9 [90/155] installing libcurl-7.21.3-1.2 [91/155] installing perl-ExtUtils-ParseXS-2.18-61.3 [92/155] installing perl-Pod-Simple-3.07-61.3 [93/155] installing perl-Test-Simple-0.80-61.3 [94/155] installing tizen-accelerator-1.0.1-1.1 [95/155] installing perl-IO-Compress-Zlib-2.008-61.3 [96/155] installing perl-Test-Harness-3.12-61.3 [97/155] installing gawk-3.1.5-2.1 [98/155] installing gzip-1.3.14-2.1 [99/155] installing mpc-0.9-1.1 [100/155] installing build-2011.01.10a-1.1 [101/155] installing curl-7.21.3-1.2 [102/155] installing dbus-1.6.4-4.1 warning: group dbus does not exist - using root [103/155] installing util-linux-2.20.2-1.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [104/155] installing bzip2-libs-x86-arm-1.0.5-8.1 [105/155] installing dbus-libs-1.6.4-4.1 [106/155] installing eglibc-x86-arm-2.13-8.2 [107/155] installing elfutils-libelf-x86-arm-0.152-8.1 [108/155] installing elfutils-libs-x86-arm-0.152-8.2 [109/155] installing gmp-x86-arm-5.0.1-8.1 [110/155] installing libacl-x86-arm-2.2.49-8.1 [111/155] installing libattr-x86-arm-2.4.44-8.1 [112/155] installing libcap-x86-arm-2.21-8.1 [113/155] installing libfile-x86-arm-5.04-8.1 [114/155] installing libgcc-x86-arm-4.5.3-8.1 [115/155] installing liblua-x86-arm-5.1.4-8.1 [116/155] installing mpc-x86-arm-0.9-8.1 [117/155] installing mpfr-x86-arm-3.0.0-9.1 [118/155] installing ncurses-libs-x86-arm-5.7-8.1 [119/155] installing nspr-x86-arm-4.9-8.2 [120/155] installing nss-softokn-freebl-x86-arm-3.12.9-8.1 [121/155] installing nss-x86-arm-3.12.9-8.1 [122/155] installing perl-ExtUtils-MakeMaker-6.36-61.3 [123/155] installing popt-x86-arm-1.16-8.1 [124/155] installing sqlite-x86-arm-3.7.9-8.1 [125/155] installing xz-libs-x86-arm-5.0.3-8.1 [126/155] installing zlib-x86-arm-1.2.5-8.1 [127/155] installing cpp-4.5.3-1.3 [128/155] installing rpm-4.9.1-4.2 [129/155] installing dbus-devel-1.6.4-4.1 [130/155] installing perl-CPAN-1.9205-61.3 [131/155] installing bash-x86-arm-4.1-8.1 [132/155] installing fdupes-x86-arm-1.40-8.1 [133/155] installing findutils-x86-arm-4.2.31-8.1 [134/155] installing gawk-x86-arm-3.1.5-8.2 [135/155] installing gzip-x86-arm-1.3.14-8.1 [136/155] installing make-x86-arm-3.82-8.1 [137/155] installing sed-x86-arm-4.1.5-8.1 [138/155] installing diffutils-x86-arm-3.0-8.1 [139/155] installing patch-x86-arm-2.6-8.1 [140/155] installing autoconf-2.68-1.1 [141/155] installing coreutils-x86-arm-6.9-8.1 [142/155] installing file-x86-arm-5.04-8.1 [143/155] installing tar-x86-arm-1.17-8.1 [144/155] installing elfutils-x86-arm-0.152-8.2 [145/155] installing gcc-4.5.3-1.3 [146/155] installing rpm-libs-4.9.1-4.2 [147/155] installing rpm-libs-x86-arm-4.9.1-8.1 [148/155] installing automake-1.11.1-3.1 [149/155] installing gcc-c++-4.5.3-1.3 [150/155] installing rpm-build-4.9.1-4.2 [151/155] installing libtool-2.2.6b-1.2 [152/155] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.1 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [153/155] installing rpm-x86-arm-4.9.1-8.1 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [154/155] installing rpm-build-x86-arm-4.9.1-8.1 [155/155] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 mv: cannot stat `/usr/bin/gprov': No such file or directory now finalizing build dir... /var/run/obs/worker/6/build/build: line 1761: /srv/build/root_6/etc/passwd: No such file or directory build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for wpasupplicant.spec: 4c4 < Release: 1 --- > Release: 1.1 ----------------------------------------------------------------- ----- building wpasupplicant.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.0:Main/standard/e332c03c0a4fa1cee8c0e67ac9caf93f-wpasupplicant' /home/abuild/rpmbuild/SOURCES/wpasupplicant.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.u3Ajlu + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf wpasupplicant-1.0.0 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/wpasupplicant-1.0.0.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd wpasupplicant-1.0.0 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.J6N6z5 + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd wpasupplicant-1.0.0 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED + cp /home/abuild/rpmbuild/SOURCES/wpa_supplicant.manifest . + cp -v configurations/tizen.config wpa_supplicant/.config `configurations/tizen.config' -> `wpa_supplicant/.config' + cp -v configurations/tizen_hostapd.config hostapd/.config `configurations/tizen_hostapd.config' -> `hostapd/.config' + make -j4 -C wpa_supplicant all make: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/wpa_supplicant' CC eap_register.c bss.c: In function 'wpa_bss_check_scan_res': bss.c:414:3: warning: pointer targets in passing argument 1 of '__builtin_strlen' differ in signedness bss.c:414:3: note: expected 'const char *' but argument is of type 'u8 *' bss.c:414:3: warning: pointer targets in passing argument 1 of '__builtin_strlen' differ in signedness bss.c:414:3: note: expected 'const char *' but argument is of type 'const u8 *' bss.c:414:3: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness bss.c:414:3: note: expected 'const char *' but argument is of type 'u8 *' bss.c:414:3: warning: pointer targets in passing argument 2 of '__builtin_strcmp' differ in signedness bss.c:414:3: note: expected 'const char *' but argument is of type 'const u8 *' bss.c:414:3: warning: pointer targets in passing argument 1 of '__builtin_strlen' differ in signedness bss.c:414:3: note: expected 'const char *' but argument is of type 'u8 *' bss.c:414:3: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness bss.c:414:3: note: expected 'const char *' but argument is of type 'u8 *' bss.c:414:3: warning: pointer targets in passing argument 2 of '__builtin_strcmp' differ in signedness bss.c:414:3: note: expected 'const char *' but argument is of type 'const u8 *' bss.c:414:3: warning: pointer targets in passing argument 1 of '__builtin_strlen' differ in signedness bss.c:414:3: note: expected 'const char *' but argument is of type 'const u8 *' bss.c:414:3: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness bss.c:414:3: note: expected 'const char *' but argument is of type 'u8 *' bss.c:414:3: warning: pointer targets in passing argument 2 of '__builtin_strcmp' differ in signedness bss.c:414:3: note: expected 'const char *' but argument is of type 'const u8 *' bss.c:414:3: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness bss.c:414:3: note: expected 'const char *' but argument is of type 'u8 *' bss.c:414:3: warning: pointer targets in passing argument 2 of '__builtin_strcmp' differ in signedness bss.c:414:3: note: expected 'const char *' but argument is of type 'const u8 *' ../src/utils/common.c: In function 'wpa_ssid_txt': ../src/utils/common.c:370:8: warning: unused variable 'pos' CC ../src/utils/common.c CC notify.c ../src/utils/wpa_debug.c: In function '__wpa_strdup_vprintf': ../src/utils/wpa_debug.c:166:2: warning: implicit declaration of function 'vasprintf' CC ../src/utils/wpabuf.c CC bss.c CC ../src/utils/wpa_debug.c CC ../src/utils/os_unix.c CC ../src/utils/eloop.c CC config_file.c CC ../src/rsn_supp/preauth.c CC config.c CC ../src/rsn_supp/pmksa_cache.c CC ../src/rsn_supp/wpa_ie.c p2p_supplicant.c: In function 'wpas_p2p_sd_request': p2p_supplicant.c:1562:10: warning: cast to pointer from integer of different size p2p_supplicant.c: In function 'wpas_p2p_sd_cancel_request': p2p_supplicant.c:1592:47: warning: cast from pointer to integer of different size CC ../src/common/wpa_common.c CC ../src/rsn_supp/peerkey.c CC ../src/rsn_supp/wpa.c CC ../src/p2p/p2p_utils.c CC ../src/p2p/p2p_parse.c CC ../src/p2p/p2p_build.c CC ../src/p2p/p2p_sd.c CC ../src/p2p/p2p_go_neg.c CC ../src/p2p/p2p_pd.c CC ../src/p2p/p2p_invitation.c CC ../src/p2p/p2p_dev_disc.c CC ../src/ap/p2p_hostapd.c CC ../src/p2p/p2p.c CC ../src/p2p/p2p_group.c CC ../src/eap_peer/eap_tls.c CC ../src/eap_common/eap_peap_common.c CC p2p_supplicant.c CC ../src/eap_peer/eap_md5.c CC ../src/eap_peer/mschapv2.c CC ../src/eap_peer/eap_gtc.c CC ../src/eap_peer/eap_mschapv2.c CC ../src/eap_peer/eap_peap.c CC ../src/eap_peer/eap_otp.c CC ../src/utils/uuid.c CC ../src/eap_peer/eap_ttls.c CC ../src/eap_common/eap_wsc_common.c CC ../src/eap_peer/eap_leap.c CC ../src/eap_peer/eap_wsc.c CC ../src/wps/wps_common.c CC ../src/wps/wps.c CC wps_supplicant.c CC ../src/wps/wps_attr_parse.c CC ../src/wps/wps_attr_process.c CC ../src/wps/wps_attr_build.c CC ../src/wps/wps_dev_attr.c CC ../src/wps/wps_enrollee.c CC ../src/eap_peer/eap_methods.c CC ../src/eapol_supp/eapol_supp_sm.c CC ../src/eap_peer/eap.c CC ../src/ap/hostapd.c CC ap.c CC ../src/ap/wpa_auth_glue.c CC ../src/ap/utils.c CC ../src/ap/authsrv.c CC ../src/wps/wps_registrar.c CC ../src/utils/ip_addr.c CC ../src/ap/tkip_countermeasures.c CC ../src/ap/ap_mlme.c CC ../src/ap/ap_config.c CC ../src/ap/ieee802_11_auth.c CC ../src/ap/sta_info.c CC ../src/ap/ieee802_11_shared.c CC ../src/ap/drv_callbacks.c CC ../src/ap/ieee802_1x.c CC ../src/eapol_auth/eapol_auth_sm.c CC ../src/ap/ieee802_11_ht.c CC ../src/ap/ctrl_iface_ap.c CC ../src/ap/ap_drv_ops.c CC ../src/ap/beacon.c CC ../src/eap_server/eap_server_identity.c CC ../src/eap_server/eap_server_methods.c CC ../src/ap/wmm.c CC ../src/ap/ap_list.c CC ../src/eap_server/eap_server.c CC ../src/ap/hw_features.c CC ../src/eap_server/eap_server_wsc.c CC ../src/ap/ieee802_11.c CC ../src/ap/wps_hostapd.c CC ../src/ap/wpa_auth_ie.c CC ../src/ap/pmksa_cache_auth.c CC ../src/eap_common/chap.c CC ../src/ap/peerkey_auth.c CC ../src/crypto/ms_funcs.c CC ../src/eap_peer/eap_tls_common.c CC ../src/crypto/crypto_openssl.c CC ../src/crypto/aes-unwrap.c CC ../src/crypto/aes-wrap.c CC ../src/crypto/aes-cbc.c CC ../src/ap/wpa_auth.c CC ../src/crypto/md5.c CC ../src/crypto/sha256.c CC ../src/crypto/dh_groups.c CC ../src/crypto/random.c CC ../src/crypto/tls_openssl.c CC ctrl_iface_unix.c CC dbus/dbus_dict_helpers.c CC dbus/dbus_new_helpers.c CC dbus/dbus_new_handlers_wps.c CC dbus/dbus_new.c CC dbus/dbus_new_introspect.c CC dbus/dbus_common.c CC dbus/dbus_new_handlers.c CC ../src/utils/base64.c CC ../src/common/ieee802_11_common.c CC sme.c CC ../src/eap_common/eap_common.c CC ctrl_iface.c CC ../src/crypto/sha1-pbkdf2.c CC ../src/crypto/sha1-tlsprf.c CC ../src/crypto/sha1.c CC ../src/common/gas.c CC dbus/dbus_new_handlers_p2p.c CC offchannel.c CC ../src/drivers/driver_common.c CC gas_query.c CC blacklist.c CC wpas_glue.c CC main.c CC scan.c CC ../src/drivers/driver_hostap.c CC ../src/utils/radiotap.c CC events.c CC ../src/drivers/netlink.c CC wpa_supplicant.c CC ../src/drivers/linux_ioctl.c CC ../src/drivers/drivers.c CC ../src/drivers/rfkill.c ../src/drivers/driver_wext.c: In function 'wpa_driver_wext_disconnect': ../src/drivers/driver_wext.c:1864:6: warning: unused variable 'i' ../src/drivers/driver_wext.c:1863:5: warning: unused variable 'ssid' CC ../src/l2_packet/l2_packet_linux.c CC ../src/common/wpa_ctrl.c CC ../src/utils/edit_simple.c CC wpa_passphrase.c sed -e 's|\@BINDIR\@|/usr/sbin|g' systemd/wpa_supplicant.service.in >systemd/wpa_supplicant.service sed -e 's|\@BINDIR\@|/usr/sbin|g' systemd/wpa_supplicant@.service.in >systemd/wpa_supplicant@.service sed -e 's|\@BINDIR\@|/usr/sbin|g' systemd/wpa_supplicant-nl80211@.service.in >systemd/wpa_supplicant-nl80211@.service sed -e 's|\@BINDIR\@|/usr/sbin|g' systemd/wpa_supplicant-wired@.service.in >systemd/wpa_supplicant-wired@.service LD wpa_passphrase CC ../src/drivers/driver_wext.c CC wpa_cli.c LD wpa_cli CC ../src/drivers/driver_nl80211.c LD wpa_supplicant make: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/wpa_supplicant' + make -C hostapd clean make: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/hostapd' make -C ../src clean make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src' for d in ap common crypto drivers eapol_auth eapol_supp eap_common eap_peer eap_server l2_packet p2p radius rsn_supp tls utils wps; do [ -d $d ] && make -C $d clean; done make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/ap' rm -f *~ *.o *.d make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/ap' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/common' rm -f *~ *.o *.d make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/common' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/crypto' rm -f *~ *.o *.d libcrypto.a make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/crypto' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/drivers' rm -f *~ *.o *.d rm -f build.wpa_supplicant build.hostapd make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/drivers' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/eapol_auth' rm -f *~ *.o *.d make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/eapol_auth' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/eapol_supp' rm -f *~ *.o *.d make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/eapol_supp' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/eap_common' rm -f *~ *.o *.d make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/eap_common' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/eap_peer' rm -f *~ *.o *.so *.d make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/eap_peer' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/eap_server' rm -f *~ *.o *.d make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/eap_server' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/l2_packet' rm -f *~ *.o *.d make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/l2_packet' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/p2p' for d in ; do make -C $d clean; done rm -f *~ *.o *.d make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/p2p' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/radius' rm -f *~ *.o *.d libradius.a make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/radius' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/rsn_supp' rm -f *~ *.o *.d make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/rsn_supp' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/tls' rm -f *~ *.o *.d libtls.a make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/tls' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/utils' rm -f *~ *.o *.d libutils.a make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/utils' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/wps' rm -f *~ *.o *.d make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src/wps' rm -f *~ make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/src' rm -f core *~ *.o hostapd hostapd_cli nt_password_hash hlr_auc_gw rm -f *.d make: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/hostapd' + make -j4 -C hostapd all make: Entering directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/hostapd' CC ../src/ap/wpa_auth_glue.c CC main.c CC ../src/ap/hostapd.c CC ../src/ap/drv_callbacks.c CC ../src/ap/utils.c CC ../src/ap/authsrv.c CC ../src/ap/ap_drv_ops.c CC ../src/ap/ap_config.c CC ../src/ap/ieee802_11_auth.c CC ../src/ap/sta_info.c CC ../src/ap/ieee802_1x.c CC ../src/ap/tkip_countermeasures.c CC ../src/ap/ap_mlme.c CC ../src/ap/preauth_auth.c CC config_file.c CC ../src/ap/pmksa_cache_auth.c CC ../src/ap/wpa_auth_ie.c CC ../src/ap/ieee802_11_shared.c CC ../src/drivers/drivers.c CC ../src/utils/common.c CC ../src/ap/wpa_auth.c CC ../src/ap/beacon.c CC ../src/utils/eloop.c CC ../src/utils/ip_addr.c CC ../src/utils/wpabuf.c CC ../src/utils/wpa_debug.c CC ../src/utils/os_unix.c CC ../src/common/ieee802_11_common.c CC dump_state.c CC ../src/common/wpa_common.c CC ../src/eapol_auth/eapol_auth_dump.c CC ../src/ap/accounting.c CC ../src/eapol_auth/eapol_auth_sm.c CC ../src/radius/radius_client.c CC ../src/ap/vlan_init.c CC ../src/radius/radius.c CC ../src/ap/ctrl_iface_ap.c CC ../src/crypto/md5.c CC ../src/ap/peerkey_auth.c CC ../src/utils/radiotap.c CC ../src/drivers/netlink.c CC ctrl_iface.c CC ../src/drivers/rfkill.c CC ../src/drivers/driver_hostap.c CC ../src/drivers/linux_ioctl.c CC ../src/eap_server/eap_server_md5.c CC ../src/l2_packet/l2_packet_linux.c CC ../src/eap_server/eap_server_tls.c CC ../src/eap_common/eap_peap_common.c CC ../src/eap_server/eap_server_mschapv2.c CC ../src/eap_server/eap_server_gtc.c CC ../src/eap_server/eap_server_peap.c CC ../src/eap_server/eap_server_ttls.c CC ../src/utils/uuid.c CC ../src/eap_common/eap_wsc_common.c CC ../src/eap_server/eap_server_wsc.c CC ../src/wps/wps.c CC ../src/wps/wps_common.c CC ../src/wps/wps_attr_parse.c CC ../src/ap/wps_hostapd.c CC ../src/wps/wps_attr_build.c CC ../src/wps/wps_attr_process.c CC ../src/wps/wps_dev_attr.c CC eap_register.c CC ../src/wps/wps_enrollee.c CC ../src/eap_common/eap_common.c CC ../src/eap_server/eap_server.c CC ../src/eap_server/eap_server_methods.c CC ../src/eap_server/eap_server_identity.c CC ../src/eap_common/chap.c CC ../src/drivers/driver_nl80211.c CC ../src/crypto/ms_funcs.c CC ../src/eap_server/eap_server_tls_common.c CC ../src/crypto/aes-wrap.c CC ../src/wps/wps_registrar.c CC ../src/crypto/crypto_openssl.c CC ../src/crypto/aes-cbc.c CC ../src/crypto/sha1.c CC ../src/crypto/sha1-pbkdf2.c CC ../src/crypto/sha1-tlsprf.c CC ../src/crypto/sha256.c CC ../src/crypto/dh_groups.c CC ../src/crypto/random.c CC ../src/utils/base64.c CC ../src/ap/wmm.c CC ../src/crypto/tls_openssl.c CC ../src/ap/ap_list.c CC ../src/ap/ieee802_11_ht.c CC ../src/drivers/driver_common.c CC ../src/ap/hw_features.c CC ../src/common/wpa_ctrl.c CC ../src/utils/edit_simple.c CC ../src/ap/ieee802_11.c CC hostapd_cli.c LD hostapd_cli LD hostapd make: Leaving directory `/home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0/hostapd' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.scQWvo + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd wpasupplicant-1.0.0 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/systemd/ + mkdir -p /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/dbus/ + cp -v wpa_supplicant/wpa_supplicant /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/ `wpa_supplicant/wpa_supplicant' -> `/home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/wpa_supplicant' + cp -v wpa_supplicant/wpa_cli /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/ `wpa_supplicant/wpa_cli' -> `/home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/wpa_cli' + cp -v hostapd/hostapd /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/ `hostapd/hostapd' -> `/home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/hostapd' + cp -v hostapd/hostapd_cli /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/ `hostapd/hostapd_cli' -> `/home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/hostapd_cli' + mkdir -p /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/wpa_supplicant/ + cp -v wpa_supplicant/wpa_supplicant.conf /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/wpa_supplicant/wpa_supplicant.conf `wpa_supplicant/wpa_supplicant.conf' -> `/home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/wpa_supplicant/wpa_supplicant.conf' + cp -v hostapd/hostapd.conf /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/wpa_supplicant/hostapd.conf `hostapd/hostapd.conf' -> `/home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/wpa_supplicant/hostapd.conf' + mkdir -p /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/dbus-1/system.d/ + cp wpa_supplicant/dbus/dbus-wpa_supplicant.conf /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/dbus-1/system.d/wpa_supplicant.conf + mkdir -p /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/share/dbus-1/services/ + cp wpa_supplicant/dbus/fi.epitest.hostap.WPASupplicant.service /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/share/dbus-1/services/ + cp wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/share/dbus-1/services/ + mkdir -p /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/rc.d/init.d + cp etc/rc.d/init.d/wpa_supplicant /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/rc.d/init.d/wpa_supplicant + mkdir -p /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/rc.d/rc3.d/ + ln -s ../init.d/wpa_supplicant /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/rc.d/rc3.d/S62wpasupplicant + mkdir -p /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/rc.d/rc5.d/ + ln -s ../init.d/wpa_supplicant /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/etc/rc.d/rc5.d/S62wpasupplicant + mkdir -p /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/share/doc/wpasupplicant + sed 's/^\([^#]\+=.*\|}\)/#\1/' + gzip + mkdir -p /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/lib/systemd/system + install -m 0644 /home/abuild/rpmbuild/SOURCES/wpa_supplicant.service /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/lib/systemd/system/ + mkdir -p /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/lib/systemd/system/network.target.wants + ln -s ../wpa_supplicant.service /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/lib/systemd/system/network.target.wants/wpa_supplicant.service + rm -rf /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/systemd/ + rm -rf /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/dbus/ + rm -rf /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/wpa_passphrase + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/wpasupplicant-1.0.0 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/hostapd extracting debug info from /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/hostapd_cli extracting debug info from /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/wpa_cli extracting debug info from /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm/usr/sbin/wpa_supplicant 8831 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm Processing files: wpasupplicant-1.0.0-1.1.armv7l Aptk: PG1hbmlmZXN0PgoJPGRlZmluZT4KCQk8ZG9tYWluIG5hbWU9IndwYXN1cHBsaWNh bnQiLz4KCTwvZGVmaW5lPgoJPGFzc2lnbj4KCQk8ZmlsZXN5c3RlbSBwYXRoPSIv ZXRjL2RidXMtMS9zeXN0ZW0uZC93cGFfc3VwcGxpY2FudC5jb25mIiBsYWJlbD0i XyIvPgoJCTxmaWxlc3lzdGVtIHBhdGg9Ii91c3IvbGliL3N5c3RlbWQvc3lzdGVt L25ldHdvcmsudGFyZ2V0LndhbnRzL3dwYV9zdXBwbGljYW50LnNlcnZpY2UiIGxh YmVsPSJfIi8+CgkJPGZpbGVzeXN0ZW0gcGF0aD0iL3Vzci9saWIvc3lzdGVtZC9z eXN0ZW0vd3BhX3N1cHBsaWNhbnQuc2VydmljZSIgbGFiZWw9Il8iLz4KCQk8Zmls ZXN5c3RlbSBwYXRoPSIvdXNyL3NoYXJlL2RidXMtMS9zZXJ2aWNlcy9maS53MS53 cGFfc3VwcGxpY2FudDEuc2VydmljZSIgbGFiZWw9Il8iLz4KCQk8ZmlsZXN5c3Rl bSBwYXRoPSIvdXNyL3NoYXJlL2RidXMtMS9zZXJ2aWNlcy9maS5lcGl0ZXN0Lmhv c3RhcC5XUEFTdXBwbGljYW50LnNlcnZpY2UiIGxhYmVsPSJfIi8+CgkJPGZpbGVz eXN0ZW0gcGF0aD0iL3Vzci9zaGFyZS9kb2Mvd3Bhc3VwcGxpY2FudC9SRUFETUUu d3BhX3N1cHBsaWNhbnQuY29uZi5neiIgbGFiZWw9Il8iLz4KCQk8ZmlsZXN5c3Rl bSBwYXRoPSIvZXRjL3JjLmQvaW5pdC5kL3dwYV9zdXBwbGljYW50IiBsYWJlbD0i XyIgZXhlY19sYWJlbD0ibm9uZSIvPgoJCTxmaWxlc3lzdGVtIHBhdGg9Ii9ldGMv cmMuZC9yYzMuZC9TNjJ3cGFzdXBwbGljYW50IiBsYWJlbD0iXyIgZXhlY19sYWJl bD0ibm9uZSIvPgoJCTxmaWxlc3lzdGVtIHBhdGg9Ii9ldGMvcmMuZC9yYzUuZC9T NjJ3cGFzdXBwbGljYW50IiBsYWJlbD0iXyIgZXhlY19sYWJlbD0ibm9uZSIvPgoJ PC9hc3NpZ24+Cgk8cmVxdWVzdD4KCQk8ZG9tYWluIG5hbWU9IndwYXN1cHBsaWNh bnQiLz4KCTwvcmVxdWVzdD4KPC9tYW5pZmVzdD4= Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig /sbin/ldconfig Requires(postun): /sbin/ldconfig /sbin/ldconfig Requires: /bin/sh ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcrypto.so.1.0.0 libdbus-1.so.3 libdl.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libnl-genl.so.2 libnl.so.2 libssl.so.1.0.0 Processing files: wpasupplicant-debuginfo-1.0.0-1.1.armv7l Processing files: wpasupplicant-debugsource-1.0.0-1.1.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm Wrote: /home/abuild/rpmbuild/SRPMS/wpasupplicant-1.0.0-1.1.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/wpasupplicant-1.0.0-1.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/wpasupplicant-debuginfo-1.0.0-1.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/wpasupplicant-debugsource-1.0.0-1.1.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.rJTm8Y + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd wpasupplicant-1.0.0 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/wpasupplicant-1.0.0-1.1.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs w08 finished "build wpasupplicant.spec" at Fri Feb 15 20:57:31 UTC 2013. Retried build at Sat Feb 16 20:05:58 2013 returned same result, skipped Retried build at Sat Feb 16 23:55:33 2013 returned same result, skipped Retried build at Sun Feb 17 06:57:46 2013 returned same result, skipped