Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_8 Using BUILD_ARCH=armv7el w01 started "build capi-location-route.spec" at Thu Apr 25 09:15:15 UTC 2013. Building capi-location-route for project 'Tizen:2.1:Main' repository 'standard' arch 'armv7el' srcmd5 '5561f41b05d2ef8872d93ececc6dc51d' processing specfile /srv/build/root_8/.build-srcdir/capi-location-route.spec ... running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/capi-location-route.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/capi-location-route.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/55] preinstalling nss... [2/55] preinstalling libfile-x86-arm... [3/55] preinstalling elfutils-libelf-x86-arm... [4/55] preinstalling nss-softokn-freebl-x86-arm... [5/55] preinstalling nss-x86-arm... [6/55] preinstalling nspr-x86-arm... [7/55] preinstalling libgcc-x86-arm... [8/55] preinstalling libacl-x86-arm... [9/55] preinstalling libattr-x86-arm... [10/55] preinstalling libcap-x86-arm... [11/55] preinstalling liblua-x86-arm... [12/55] preinstalling popt-x86-arm... [13/55] preinstalling xz-libs-x86-arm... [14/55] preinstalling zlib-x86-arm... [15/55] preinstalling file... [16/55] preinstalling sqlite-x86-arm... [17/55] preinstalling mpfr-x86-arm... [18/55] preinstalling gmp-x86-arm... [19/55] preinstalling mpc-x86-arm... [20/55] preinstalling bzip2-libs-x86-arm... [21/55] preinstalling rpm-x86-arm... [22/55] preinstalling rpm-libs-x86-arm... [23/55] preinstalling tizen-accelerator... [24/55] preinstalling eglibc-x86-arm... [25/55] preinstalling ncurses-libs-x86-arm... [26/55] preinstalling bash-x86-arm... [27/55] preinstalling rpm... [28/55] preinstalling rpm-libs... [29/55] preinstalling setup... [30/55] preinstalling filesystem... [31/55] preinstalling bash... [32/55] preinstalling bzip2... [33/55] preinstalling coreutils... [34/55] preinstalling diffutils... [35/55] preinstalling liblua... [36/55] preinstalling eglibc... [37/55] preinstalling eglibc-common... [38/55] preinstalling libacl... [39/55] preinstalling libattr... [40/55] preinstalling libgcc... [41/55] preinstalling libcap... [42/55] preinstalling popt... [43/55] preinstalling readline... [44/55] preinstalling sed... [45/55] preinstalling tar... [46/55] preinstalling zlib... [47/55] preinstalling sqlite... [48/55] preinstalling ncurses-libs... [49/55] preinstalling elfutils-libelf... [50/55] preinstalling bzip2-libs... [51/55] preinstalling libstdc++... [52/55] preinstalling libfile... [53/55] preinstalling xz-libs... [54/55] preinstalling nspr... [55/55] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: dbus-libs -> dbus breaking dependency dbus -> dbus-libs cycle: systemd -> libudev -> udev breaking dependency systemd -> libudev cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/175] [2/175] installing capi-base-common-0.1.0-8.1 [3/175] installing kernel-headers-2.6.36-1.1 [4/175] installing libX11-common-1.5.0-2.1 [5/175] installing tizen-release-2.0.0-2.1 [6/175] installing tzdata-2011h-2.1 [7/175] installing libgcc-4.5.3-2.1 [8/175] installing setup-0.1-2.1 [9/175] installing filesystem-0.1-2.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [10/175] installing eglibc-2.13-2.16 [11/175] installing eglibc-common-2.13-2.16 warning: %post(eglibc-common-2.13-2.16.armv7l) scriptlet failed, exit status 255 [12/175] installing bash-4.1-4.1 [13/175] installing bzip2-libs-1.0.5-6.1 [14/175] installing cpio-2.8-4.1 [15/175] installing diffutils-3.0-3.1 [16/175] installing e2fsprogs-libs-1.41.11-2.4 [17/175] installing elfutils-libelf-0.152-2.14 [18/175] installing expat-2.0.1-9.1 [19/175] installing fdupes-1.40-43.1 [20/175] installing findutils-4.2.31-2.1 [21/175] installing gdbm-1.8.3-5.1 [22/175] installing kmod-5-2.1 [23/175] installing libXau-1.0.7-1.1 [24/175] installing libattr-2.4.44-8.4 [25/175] installing libdlog-0.4.1-5.1 [26/175] installing libffi-3.0.9-100.1 [27/175] installing libgomp-4.5.3-2.1 [28/175] installing libidn-1.15-6.1 [29/175] installing liblua-5.1.4-7.1 [30/175] installing libstdc++-4.5.3-2.1 [31/175] installing libuuid-2.20.2-5.1 [32/175] installing lzo-2.03-1.1 [33/175] installing m4-1.4.14-2.1 [34/175] installing make-3.81-1.1 [35/175] installing net-tools-1.60-89.8 [36/175] installing nspr-4.8.7-1.11 [37/175] installing nss-softokn-freebl-3.12.9-4.14 [38/175] installing patch-2.6.1.169-1.1 [39/175] installing pkgconfig-0.25-3.1 [40/175] installing popt-1.16-4.1 [41/175] installing readline-5.2-13.2 [42/175] installing sed-4.1.5-2.1 [43/175] installing smack-1.0slp2+s7-2.1 [44/175] installing sqlite-3.7.13-1.1 [45/175] installing xz-libs-5.0.3-2.1 [46/175] installing zlib-1.2.5-3.12 [47/175] installing ncurses-libs-5.7-6.1 [48/175] installing build-compare-2009.10.14-27.10 [49/175] installing libstdc++-devel-4.5.3-2.1 [50/175] installing vconf-internal-keys-devel-0.0.78-1.1 [51/175] installing capi-base-common-devel-0.1.0-8.1 [52/175] installing eglibc-headers-2.13-2.16 [53/175] installing libcap-2.21-2.1 [54/175] installing libdlog-devel-0.4.1-5.1 [55/175] installing unzip-6.0-10.7 [56/175] installing zlib-devel-1.2.5-3.12 [57/175] installing c-ares-1.7.4-3.1 [58/175] installing gmp-5.0.1-2.1 [59/175] installing libacl-2.2.49-2.1 [60/175] installing libfile-5.04-2.1 [61/175] installing libpcre-7.9-2.1 [62/175] installing libxcb-1.8.1-1.1 [63/175] installing libxml2-2.7.8-10.1 [64/175] installing lzo-minilzo-2.03-1.1 [65/175] installing ncurses-5.7-6.1 [66/175] installing openssl-1.0.1c-2.21 [67/175] installing binutils-2.21.51.20110421-5.1 [68/175] installing bzip2-1.0.5-6.1 [69/175] installing glib2-2.32.3-5.1 [70/175] installing libblkid-2.20.2-5.1 [71/175] installing xz-5.0.3-2.1 [72/175] installing elfutils-libs-0.152-2.14 [73/175] installing nss-3.12.9-4.14 [74/175] installing perl-5.12.1-64.5 [75/175] installing ncurses-base-5.7-6.1 [76/175] installing perl-HTML-Tagset-3.20-8.1 [77/175] installing perl-IO-Compress-Base-2.008-64.5 [78/175] installing perl-Module-Pluggable-3.60-64.5 [79/175] installing perl-Pod-Escapes-1.04-64.5 [80/175] installing perl-TimeDate-1.20-1.1 [81/175] installing eglibc-devel-2.13-2.16 [82/175] installing grep-2.5.1a-63.1 [83/175] installing lzo-devel-2.03-1.1 [84/175] installing mpfr-3.0.0-2.1 [85/175] installing perl-Compress-Raw-Zlib-2.008-64.5 [86/175] installing perl-devel-5.12.1-64.5 [87/175] installing perl-libs-5.12.1-64.5 [88/175] installing tar-1.17-3.2 [89/175] installing coreutils-6.9-10.1 [90/175] installing file-5.04-2.1 [91/175] installing libX11-1.5.0-2.1 [92/175] installing libmount-2.20.2-5.1 [93/175] installing xz-lzma-compat-5.0.3-2.1 [94/175] installing elfutils-0.152-2.14 [95/175] installing nss-sysinit-3.12.9-4.14 [96/175] installing libcurl-7.21.3-7.1 [97/175] installing libarchive-2.8.3-2.1 [98/175] installing perl-ExtUtils-ParseXS-2.18-64.5 [99/175] installing perl-Pod-Simple-3.07-64.5 [100/175] installing perl-Test-Simple-0.80-64.5 [101/175] installing tizen-accelerator-1.0.1-1.1 [102/175] installing perl-IO-Compress-Zlib-2.008-64.5 [103/175] installing perl-Test-Harness-3.12-64.5 [104/175] installing gawk-3.1.5-3.1 [105/175] installing gzip-1.3.14-2.1 [106/175] installing mpc-0.9-1.1 [107/175] installing pam-1.1.5-3.1 [108/175] installing build-2011.01.10a-2.1 [109/175] installing curl-7.21.3-7.1 [110/175] installing dbus-1.6.4-5.1 warning: group dbus does not exist - using root [111/175] installing util-linux-2.20.2-5.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [112/175] installing cmake-2.8.5-4.1 [113/175] installing glib2-devel-2.32.3-5.1 [114/175] installing bzip2-libs-x86-arm-1.0.5-8.2 [115/175] installing dbus-libs-1.6.4-5.1 [116/175] installing eglibc-x86-arm-2.13-8.8 [117/175] installing elfutils-libelf-x86-arm-0.152-8.2 [118/175] installing elfutils-libs-x86-arm-0.152-8.13 [119/175] installing gmp-x86-arm-5.0.1-8.2 [120/175] installing libacl-x86-arm-2.2.49-8.2 [121/175] installing libattr-x86-arm-2.4.44-8.2 [122/175] installing libcap-x86-arm-2.21-8.2 [123/175] installing libfile-x86-arm-5.04-8.2 [124/175] installing libgcc-x86-arm-4.5.3-8.2 [125/175] installing liblua-x86-arm-5.1.4-8.2 [126/175] installing mpc-x86-arm-0.9-8.2 [127/175] installing mpfr-x86-arm-3.0.0-9.2 [128/175] installing ncurses-libs-x86-arm-5.7-8.3 [129/175] installing nspr-x86-arm-4.8.7-8.13 [130/175] installing nss-softokn-freebl-x86-arm-3.12.9-8.12 [131/175] installing nss-x86-arm-3.12.9-8.12 [132/175] installing perl-ExtUtils-MakeMaker-6.36-64.5 [133/175] installing popt-x86-arm-1.16-8.2 [134/175] installing sqlite-x86-arm-3.7.9-8.2 [135/175] installing xz-libs-x86-arm-5.0.3-8.2 [136/175] installing zlib-x86-arm-1.2.5-8.2 [137/175] installing cpp-4.5.3-2.1 [138/175] installing rpm-4.9.1-5.2 [139/175] installing perl-CPAN-1.9205-64.5 [140/175] installing bash-x86-arm-4.1-8.2 [141/175] installing dbus-glib-0.100-4.1 [142/175] installing fdupes-x86-arm-1.40-8.2 [143/175] installing findutils-x86-arm-4.2.31-8.2 [144/175] installing gawk-x86-arm-3.1.5-8.3 [145/175] installing gzip-x86-arm-1.3.14-8.2 [146/175] installing make-x86-arm-3.81-8.2 [147/175] installing patch-x86-arm-2.6.1.169-8.2 [148/175] installing sed-x86-arm-4.1.5-8.2 [149/175] installing diffutils-x86-arm-3.0-8.2 [150/175] installing autoconf-2.68-2.1 [151/175] installing coreutils-x86-arm-6.9-8.2 [152/175] installing file-x86-arm-5.04-8.2 [153/175] installing tar-x86-arm-1.17-8.2 [154/175] installing elfutils-x86-arm-0.152-8.13 [155/175] installing systemd-43-2.1 [156/175] installing gcc-4.5.3-2.1 [157/175] installing rpm-libs-4.9.1-5.2 [158/175] installing rpm-libs-x86-arm-4.9.1-8.2 [159/175] installing automake-1.11.1-4.1 [160/175] installing vconf-0.2.45-3.1 Running in chroot, ignoring request. [161/175] installing udev-182-6.1 Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. [162/175] installing gcc-c++-4.5.3-2.1 [163/175] installing rpm-build-4.9.1-5.2 [164/175] installing vconf-keys-devel-0.2.45-3.1 [165/175] installing libudev-182-6.1 [166/175] installing libtool-2.2.6b-2.1 [167/175] installing libslp-location-0.4.7-1.1 [168/175] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [169/175] installing rpm-x86-arm-4.9.1-8.2 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [170/175] installing rpm-build-x86-arm-4.9.1-8.2 [171/175] installing vconf-devel-0.2.45-3.1 [172/175] installing capi-location-manager-0.1.9-1.1 [173/175] installing cross-armv7l-binutils-accel-armv7l-2.22-1.2 mv: cannot stat `/usr/bin/gprov': No such file or directory [174/175] installing capi-location-manager-devel-0.1.9-1.1 [175/175] installing libslp-location-devel-0.4.7-1.1 now finalizing build dir... /var/run/obs/worker/8/build/build: line 1761: /srv/build/root_8/etc/passwd: No such file or directory build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for capi-location-route.spec: 4c4 < Release: 1 --- > Release: 1.1 ----------------------------------------------------------------- ----- building capi-location-route.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.1:Main/standard/5561f41b05d2ef8872d93ececc6dc51d-capi-location-route' /home/abuild/rpmbuild/SOURCES/capi-location-route.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Sgp66n + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf capi-location-route-0.1.3 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-location-route-0.1.3.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd capi-location-route-0.1.3 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.uGzUXQ + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-location-route-0.1.3 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED ++ echo 0.1.3 ++ awk 'BEGIN {FS="."}{print $1}' + MAJORVER=0 + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=0.1.3 -DMAJORVER=0 -- The C compiler identification is GNU -- The CXX compiler identification is GNU -- Check for working C compiler: /usr/bin/gcc -- Check for working C compiler: /usr/bin/gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- checking for module 'dlog location capi-base-common capi-location-manager' -- found dlog location capi-base-common capi-location-manager, version 1.0;0.1;0.0.1 -- checking for modules '' Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line route_test -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: CMAKE_INSTALL_LIBDIR INCLUDE_INSTALL_DIR SHARE_INSTALL_PREFIX SYSCONF_INSTALL_DIR -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 + make -j4 /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 -B/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles/progress.marks make -f CMakeFiles/Makefile2 all make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' make -f CMakeFiles/capi-location-route.dir/build.make CMakeFiles/capi-location-route.dir/depend make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' cd /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles/capi-location-route.dir/DependInfo.cmake --color= Scanning dependencies of target capi-location-route make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' make -f CMakeFiles/capi-location-route.dir/build.make CMakeFiles/capi-location-route.dir/build make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles 1 /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles 2 /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles 3 [ 75%] [ 75%] [ 75%] Building C object CMakeFiles/capi-location-route.dir/src/route_service.c.o Building C object CMakeFiles/capi-location-route.dir/src/route.c.o Building C object CMakeFiles/capi-location-route.dir/src/route_preference.c.o /usr/bin/gcc -Dcapi_location_route_EXPORTS -DPREFIX=\"/usr\" -DTIZEN_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -pthread -I/usr/include/dlog -I/usr/include/location -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/vconf -fPIC -Wall -fPIC -I/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/include -o CMakeFiles/capi-location-route.dir/src/route_service.c.o -c /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/src/route_service.c /usr/bin/gcc -Dcapi_location_route_EXPORTS -DPREFIX=\"/usr\" -DTIZEN_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -pthread -I/usr/include/dlog -I/usr/include/location -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/vconf -fPIC -Wall -fPIC -I/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/include -o CMakeFiles/capi-location-route.dir/src/route.c.o -c /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/src/route.c /usr/bin/gcc -Dcapi_location_route_EXPORTS -DPREFIX=\"/usr\" -DTIZEN_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -pthread -I/usr/include/dlog -I/usr/include/location -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/vconf -fPIC -Wall -fPIC -I/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/include -o CMakeFiles/capi-location-route.dir/src/route_preference.c.o -c /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/src/route_preference.c Linking C shared library libcapi-location-route.so /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-location-route.dir/link.txt --verbose=1 /usr/bin/gcc -fPIC -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -pthread -I/usr/include/dlog -I/usr/include/location -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/vconf -fPIC -Wall -shared -Wl,-soname,libcapi-location-route.so.0 -o libcapi-location-route.so.0.1.3 CMakeFiles/capi-location-route.dir/src/route_service.c.o CMakeFiles/capi-location-route.dir/src/route_preference.c.o CMakeFiles/capi-location-route.dir/src/route.c.o -Wl,--export-dynamic -pthread -ldlog -lpthread -lSLP-location -lgobject-2.0 -lgmodule-2.0 -lrt -lvconf -lglib-2.0 -lcapi-location-manager /usr/bin/cmake -E cmake_symlink_library libcapi-location-route.so.0.1.3 libcapi-location-route.so.0 libcapi-location-route.so make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles 1 2 3 [ 75%] Built target capi-location-route make -f test/CMakeFiles/route_test.dir/build.make test/CMakeFiles/route_test.dir/depend make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' cd /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/test /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/test /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/test/CMakeFiles/route_test.dir/DependInfo.cmake --color= Scanning dependencies of target route_test make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' make -f test/CMakeFiles/route_test.dir/build.make test/CMakeFiles/route_test.dir/build make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles 4 [100%] Building C object test/CMakeFiles/route_test.dir/route_test.c.o cd /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/test && /usr/bin/gcc -DPREFIX=\"/usr\" -DTIZEN_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -pthread -I/usr/include/dlog -I/usr/include/location -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/vconf -fPIC -Wall -pthread -I/usr/include/dlog -I/usr/include/location -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/vconf -Wall -Werror -I/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/include -o CMakeFiles/route_test.dir/route_test.c.o -c /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/test/route_test.c Linking C executable route_test cd /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/test && /usr/bin/cmake -E cmake_link_script CMakeFiles/route_test.dir/link.txt --verbose=1 /usr/bin/gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -pthread -I/usr/include/dlog -I/usr/include/location -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/vconf -fPIC -Wall -pthread -I/usr/include/dlog -I/usr/include/location -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/vconf -Wall -Werror -Wl,--as-needed -Wl,--rpath=/usr/lib CMakeFiles/route_test.dir/route_test.c.o -o route_test -rdynamic ../libcapi-location-route.so.0.1.3 -Wl,--export-dynamic -pthread -ldlog -lpthread -lSLP-location -lgobject-2.0 -lgmodule-2.0 -lrt -lvconf -lglib-2.0 -lcapi-location-manager make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles 4 [100%] Built target route_test make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles 0 + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.AFrsiz + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-location-route-0.1.3 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm install /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 -B/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' /usr/bin/make -f CMakeFiles/capi-location-route.dir/build.make CMakeFiles/capi-location-route.dir/depend make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' cd /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles/capi-location-route.dir/DependInfo.cmake --color= make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' /usr/bin/make -f CMakeFiles/capi-location-route.dir/build.make CMakeFiles/capi-location-route.dir/build make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' make[2]: Nothing to be done for `CMakeFiles/capi-location-route.dir/build'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles 1 2 3 [ 75%] Built target capi-location-route /usr/bin/make -f test/CMakeFiles/route_test.dir/build.make test/CMakeFiles/route_test.dir/depend make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' cd /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/test /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/test /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/test/CMakeFiles/route_test.dir/DependInfo.cmake --color= make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' /usr/bin/make -f test/CMakeFiles/route_test.dir/build.make test/CMakeFiles/route_test.dir/build make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' make[2]: Nothing to be done for `test/CMakeFiles/route_test.dir/build'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles 4 [100%] Built target route_test make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3/CMakeFiles 0 /usr/bin/make -f CMakeFiles/Makefile2 preinstall make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' make[1]: Nothing to be done for `preinstall'. make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3' Install the project... /usr/bin/cmake -P cmake_install.cmake -- Install configuration: "" -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm/usr/lib/libcapi-location-route.so.0.1.3 -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm/usr/lib/libcapi-location-route.so.0 -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm/usr/lib/libcapi-location-route.so -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm/usr/include/location -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm/usr/include/location/route_handle.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm/usr/include/location/route_preference.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm/usr/include/location/route_service.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm/usr/include/location/route.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm/usr/lib/pkgconfig/capi-location-route.pc + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm/usr/share/info/dir + find /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm -regex '.*\.la$' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm -regex '.*\.a$' + xargs rm -f -- + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm/usr/lib/libcapi-location-route.so.0.1.3 symlinked /usr/lib/debug/usr/lib/libcapi-location-route.so.0.1.3.debug to /usr/lib/debug/usr/lib/libcapi-location-route.so.debug symlinked /usr/lib/debug/usr/lib/libcapi-location-route.so.0.1.3.debug to /usr/lib/debug/usr/lib/libcapi-location-route.so.0.debug 209 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm Processing files: capi-location-route-0.1.3-1.1.armv7l Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== Provides: libcapi-location-route.so.0 Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig /sbin/ldconfig Requires(postun): /sbin/ldconfig /sbin/ldconfig Requires: libSLP-location.so.0 libc.so.6 libc.so.6(GLIBC_2.4) libcapi-location-manager.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libgmodule-2.0.so.0 libgobject-2.0.so.0 libpthread.so.0 librt.so.1 libvconf.so.0 Processing files: capi-location-route-devel-0.1.3-1.1.armv7l Provides: pkgconfig(capi-location-route) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libcapi-location-route.so.0 pkgconfig(capi-base-common) pkgconfig(capi-location-manager) Processing files: capi-location-route-debuginfo-0.1.3-1.1.armv7l Processing files: capi-location-route-debugsource-0.1.3-1.1.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm Wrote: /home/abuild/rpmbuild/SRPMS/capi-location-route-0.1.3-1.1.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-location-route-0.1.3-1.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-location-route-devel-0.1.3-1.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-location-route-debuginfo-0.1.3-1.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-location-route-debugsource-0.1.3-1.1.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ZJKOGa + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-location-route-0.1.3 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.1.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs w01 finished "build capi-location-route.spec" at Thu Apr 25 09:15:48 UTC 2013. Retried build at Thu Apr 25 07:49:22 2013 returned same result, skipped