Memory limit set to 88440376KB Using BUILD_ROOT=/srv/build/root_3 Using BUILD_ARCH=armv7el w11 started "build capi-system-system-settings.spec" at Fri Apr 26 16:11:40 UTC 2013. Building capi-system-system-settings for project 'Tizen:2.1:Main' repository 'standard' arch 'armv7el' srcmd5 '16230aab6dd0966ed809a42f2949f6e2' processing specfile /srv/build/root_3/.build-srcdir/capi-system-system-settings.spec ... running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/capi-system-system-settings.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/capi-system-system-settings.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/55] preinstalling nss... [2/55] preinstalling libfile-x86-arm... [3/55] preinstalling elfutils-libelf-x86-arm... [4/55] preinstalling nss-softokn-freebl-x86-arm... [5/55] preinstalling nss-x86-arm... [6/55] preinstalling nspr-x86-arm... [7/55] preinstalling libgcc-x86-arm... [8/55] preinstalling libacl-x86-arm... [9/55] preinstalling libattr-x86-arm... [10/55] preinstalling libcap-x86-arm... [11/55] preinstalling liblua-x86-arm... [12/55] preinstalling popt-x86-arm... [13/55] preinstalling xz-libs-x86-arm... [14/55] preinstalling zlib-x86-arm... [15/55] preinstalling file... [16/55] preinstalling sqlite-x86-arm... [17/55] preinstalling mpfr-x86-arm... [18/55] preinstalling gmp-x86-arm... [19/55] preinstalling mpc-x86-arm... [20/55] preinstalling bzip2-libs-x86-arm... [21/55] preinstalling rpm-x86-arm... [22/55] preinstalling rpm-libs-x86-arm... [23/55] preinstalling tizen-accelerator... [24/55] preinstalling eglibc-x86-arm... [25/55] preinstalling ncurses-libs-x86-arm... [26/55] preinstalling bash-x86-arm... [27/55] preinstalling rpm... [28/55] preinstalling rpm-libs... [29/55] preinstalling setup... [30/55] preinstalling filesystem... [31/55] preinstalling bash... [32/55] preinstalling bzip2... [33/55] preinstalling coreutils... [34/55] preinstalling diffutils... [35/55] preinstalling liblua... [36/55] preinstalling eglibc... [37/55] preinstalling eglibc-common... [38/55] preinstalling libacl... [39/55] preinstalling libattr... [40/55] preinstalling libgcc... [41/55] preinstalling libcap... [42/55] preinstalling popt... [43/55] preinstalling readline... [44/55] preinstalling sed... [45/55] preinstalling tar... [46/55] preinstalling zlib... [47/55] preinstalling sqlite... [48/55] preinstalling ncurses-libs... [49/55] preinstalling elfutils-libelf... [50/55] preinstalling bzip2-libs... [51/55] preinstalling libstdc++... [52/55] preinstalling libfile... [53/55] preinstalling xz-libs... [54/55] preinstalling nspr... [55/55] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: bash -> eglibc -> eglibc-common -> coreutils breaking dependency eglibc-common -> coreutils cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> findutils breaking dependency eglibc-common -> findutils cycle: eglibc -> eglibc-common -> grep breaking dependency grep -> eglibc cycle: eglibc -> eglibc-common -> grep -> libgcc breaking dependency grep -> libgcc cycle: eglibc -> eglibc-common -> grep -> libpcre breaking dependency libpcre -> eglibc cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc breaking dependency libpcre -> libgcc cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ breaking dependency libstdc++ -> eglibc cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc breaking dependency eglibc-common -> grep cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: dbus-libs -> dbus breaking dependency dbus -> dbus-libs cycle: systemd -> libudev -> udev breaking dependency systemd -> libudev cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs cycle: pkgmgr-info -> pkgmgr-info-parser breaking dependency pkgmgr-info-parser -> pkgmgr-info cycle: app-core-common -> aul -> privacy-manager-client -> privacy-manager-server -> app-core-efl breaking dependency app-core-efl -> app-core-common cycle: aul -> privacy-manager-client -> privacy-manager-server -> app-core-efl breaking dependency app-core-efl -> aul cycle: aul -> privacy-manager-client -> privacy-manager-server -> app-core-efl -> elementary -> app-svc breaking dependency aul -> privacy-manager-client cycle: pkgmgr-installer -> pkgmgr -> pkgmgr-client breaking dependency pkgmgr -> pkgmgr-client cycle: pkgmgr-installer -> pkgmgr breaking dependency pkgmgr -> pkgmgr-installer cycle: privacy-manager-client -> privacy-manager-server breaking dependency privacy-manager-server -> privacy-manager-client done [1/307] [2/307] installing capi-base-common-0.1.0-8.1 [3/307] installing kernel-headers-2.6.36-1.1 [4/307] installing libX11-common-1.5.0-2.2 [5/307] installing opengl-es-virtual-drv-0.1.5-10.1 [6/307] installing tizen-release-2.1.0-1.1 [7/307] installing tzdata-2011h-1.1 [8/307] installing libgcc-4.5.3-1.1 [9/307] installing setup-0.1-2.1 [10/307] installing filesystem-0.1-1.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [11/307] installing eglibc-2.13-1.7 [12/307] installing libstdc++-4.5.3-1.1 [13/307] installing eglibc-common-2.13-1.7 /var/tmp/rpm-tmp.hZTviZ: line 2: /bin/grep: No such file or directory /var/tmp/rpm-tmp.hZTviZ: line 2: /usr/bin/xargs: No such file or directory [14/307] installing iniparser-2.17-3.1 [15/307] installing libstdc++-devel-4.5.3-1.1 [16/307] installing bash-4.1-3.1 [17/307] installing bzip2-libs-1.0.5-4.1 [18/307] installing cpio-2.8-3.1 [19/307] installing diffutils-3.0-3.1 [20/307] installing e2fsprogs-libs-1.41.9-2.4 [21/307] installing elfutils-libelf-0.152-1.6 [22/307] installing expat-2.0.1-8.1 [23/307] installing fdupes-1.40-42.1 [24/307] installing findutils-4.2.31-1.1 [25/307] installing fribidi-0.19.5-5.1 [26/307] installing gdbm-1.8.3-1.1 [27/307] installing kmod-5-2.2 [28/307] installing libICE-1.0.8-1.1 [29/307] installing libXau-1.0.7-1.1 [30/307] installing libasound-1.0.24.1-1.1 [31/307] installing libattr-2.4.44-7.3 [32/307] installing libdlog-0.4.1-5.1 [33/307] installing libdrm2-2.4.35-15.1 [34/307] installing libexif-0.6.21-4.1 [35/307] installing libffi-3.0.9-100.1 [36/307] installing libgomp-4.5.3-1.1 [37/307] installing libidn-1.15-6.1 [38/307] installing libjpeg-turbo-1.2.0-8.1 [39/307] installing liblua-5.1.4-6.1 [40/307] installing libogg-1.2.1-3.1 [41/307] installing libslp-pm-1.2.4-2.1 [42/307] installing libuuid-2.20.2-1.1 [43/307] installing lzo-2.03-1.1 [44/307] installing m4-1.4.14-1.1 [45/307] installing make-3.81-1.1 [46/307] installing net-tools-1.60-87.2 [47/307] installing nspr-4.8.7-1.6 [48/307] installing nss-softokn-freebl-3.12.9-3.8 [49/307] installing patch-2.6.1.169-1.1 [50/307] installing pixman-0.28.2-1.1 [51/307] installing pkgconfig-0.25-3.1 [52/307] installing popt-1.16-3.1 [53/307] installing readline-5.2-13.5 [54/307] installing sed-4.1.5-2.1 [55/307] installing smack-1.0slp2+s9-1.1 [56/307] installing sqlite-3.7.13-1.1 [57/307] installing xdgmime-0.0.12-2.1 [58/307] installing xz-libs-5.0.3-1.1 [59/307] installing zlib-1.2.5-2.5 [60/307] installing gmp-5.0.1-1.1 [61/307] installing libpcre-7.7-2.1 [62/307] installing ncurses-libs-5.7-4.1 [63/307] installing build-compare-2009.10.14-26.5 [64/307] installing libpthread-stubs-0.3-2.1 [65/307] installing vconf-internal-keys-devel-0.0.78-1.1 [66/307] installing xorg-x11-proto-core-7.0.23-2.1 [67/307] installing xorg-x11-proto-kb-1.0.6-2.1 [68/307] installing capi-base-common-devel-0.1.0-8.1 [69/307] installing eglibc-headers-2.13-1.7 [70/307] installing fribidi-devel-0.19.5-5.1 [71/307] installing libcap-2.21-1.1 [72/307] installing libdlog-devel-0.4.1-5.1 [73/307] installing libexif-devel-0.6.21-4.1 [74/307] installing liblua-devel-5.1.4-6.1 [75/307] installing pixman-devel-0.28.2-1.1 [76/307] installing sqlite-devel-3.7.13-1.1 [77/307] installing unzip-6.0-9.3 [78/307] installing xdgmime-devel-0.0.12-2.1 [79/307] installing zlib-devel-1.2.5-2.5 [80/307] installing c-ares-1.7.4-2.1 [81/307] installing eina-1.7.1+svn.77445+build05r01-1.2 [82/307] installing freetype-2.4.9-1.1 [83/307] installing grep-2.5.1a-62.1 [84/307] installing libacl-2.2.49-1.1 [85/307] installing libfile-5.04-1.1 [86/307] installing libpng-1.2.50-1.1 [87/307] installing libpython-2.7.1-1.6 [88/307] installing libtbm-1.0.5-2.1 [89/307] installing libtheora-1.1.1-4.1 [90/307] installing libvorbis-1.2.3-3.1 [91/307] installing libxcb-1.8.1-1.1 [92/307] installing libxml2-2.7.8-8.1 [93/307] installing lzo-minilzo-2.03-1.1 [94/307] installing mpfr-3.0.0-1.1 [95/307] installing ncurses-5.7-4.1 [96/307] installing binutils-2.22-1.1 [97/307] installing bzip2-1.0.5-4.1 [98/307] installing glib2-2.32.3-5.4 [99/307] installing libSM-1.2.1-1.1 [100/307] installing libblkid-2.20.2-1.1 [101/307] installing libicu-4.8-2.1 [102/307] installing libsf-common-0.3.20-1.1 [103/307] installing xz-5.0.3-1.1 [104/307] installing elfutils-libs-0.152-1.6 [105/307] installing libprivilege-control-0.0.25.TIZEN-1.1 [106/307] installing nss-3.12.9-3.8 [107/307] installing perl-5.12.1-61.5 [108/307] installing ncurses-base-5.7-4.1 [109/307] installing perl-HTML-Tagset-3.20-8.1 [110/307] installing perl-IO-Compress-Base-2.008-61.5 [111/307] installing perl-Module-Pluggable-3.60-61.5 [112/307] installing perl-Pod-Escapes-1.04-61.5 [113/307] installing perl-TimeDate-1.20-1.1 [114/307] installing eglibc-devel-2.13-1.7 [115/307] installing libicu-devel-4.8-2.1 [116/307] installing eina-devel-1.7.1+svn.77445+build05r01-1.2 [117/307] installing embryo-1.7.1+svn.76491slp2+build01-1.1 [118/307] installing libXau-devel-1.0.7-1.1 [119/307] installing lzo-devel-2.03-1.1 [120/307] installing perl-Compress-Raw-Zlib-2.008-61.5 [121/307] installing perl-devel-5.12.1-61.5 [122/307] installing perl-libs-5.12.1-61.5 [123/307] installing tar-1.17-4.1 [124/307] installing app-checker-0.0.16-1.1 [125/307] installing bundle-0.1.30-1.1 [126/307] installing coreutils-6.9-9.1 [127/307] installing ecore-1.7.1+svn.77580+build11r02-3.1 [128/307] installing file-5.04-1.1 [129/307] installing freetype-devel-2.4.9-1.1 [130/307] installing gstreamer-0.10.36-6.1 [131/307] installing heynoti-0.0.2-39.1 [132/307] installing libX11-1.5.0-2.2 [133/307] installing libmount-2.20.2-1.1 [134/307] installing mpc-0.9-1.1 [135/307] installing openssl-1.0.1c-1.9 [136/307] installing xz-lzma-compat-5.0.3-1.1 [137/307] installing eet-1.7.1+svn.77495slp2+build01-1.1 [138/307] installing elfutils-0.152-1.6 [139/307] installing nss-sysinit-3.12.9-3.8 [140/307] installing python-base-2.7.1-1.6 [141/307] installing shared-mime-info-0.60-6.1 [142/307] installing libslp-db-util-0.1.1-5.1 [143/307] installing libsoup2.4-2.38.1_0.1.2-1.1 [144/307] installing bundle-devel-0.1.30-1.1 [145/307] installing embryo-devel-1.7.1+svn.76491slp2+build01-1.1 [146/307] installing perl-ExtUtils-ParseXS-2.18-61.5 [147/307] installing perl-Pod-Simple-3.07-61.5 [148/307] installing perl-Test-Simple-0.80-61.5 [149/307] installing tizen-accelerator-1.0.1-1.1 [150/307] installing libXcomposite-0.4.3-3.1 [151/307] installing libXext-1.3.1-1.1 [152/307] installing libXfixes-5.0-2.1 [153/307] installing libXrender-0.9.7-1.1 [154/307] installing libidn-devel-1.15-6.1 [155/307] installing perl-IO-Compress-Zlib-2.008-61.5 [156/307] installing perl-Test-Harness-3.12-61.5 [157/307] installing eet-devel-1.7.1+svn.77495slp2+build01-1.1 [158/307] installing gawk-3.1.5-1.1 [159/307] installing gzip-1.3.14-2.1 [160/307] installing libxcb-devel-1.8.1-1.1 [161/307] installing pam-1.1.5-2.1 [162/307] installing app-checker-server-0.0.16-1.1 [163/307] installing build-2011.01.10a-1.1 [164/307] installing ecore-imf-1.7.1+svn.77580+build11r02-3.1 [165/307] installing ecore-input-1.7.1+svn.77580+build11r02-3.1 [166/307] installing giflib-4.1.6-13.2 [167/307] installing python-devel-2.7.1-1.6 [168/307] installing libcurl-7.28.1-1.1 [169/307] installing cpp-4.5.3-1.1 [170/307] installing dbus-1.6.4-5.1 warning: group dbus does not exist - using root [171/307] installing util-linux-2.20.2-1.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [172/307] installing fontconfig-2.9.0-2.1 [173/307] installing librua-0.1.0-34.1 sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.rua.db': No such file or directory chown: cannot access `/opt/dbspace/.rua.db-journal': No such file or directory chmod: cannot access `/opt/dbspace/.rua.db': No such file or directory chmod: cannot access `/opt/dbspace/.rua.db-journal': No such file or directory /var/tmp/rpm-tmp.hCDqsl: line 9: chsmack: command not found /var/tmp/rpm-tmp.hCDqsl: line 10: chsmack: command not found warning: %post(librua-0.1.0-34.1.armv7l) scriptlet failed, exit status 127 [174/307] installing libarchive-2.8.3-1.1 [175/307] installing glib2-devel-2.32.3-5.4 [176/307] installing bzip2-libs-x86-arm-1.0.5-8.2 [177/307] installing dbus-libs-1.6.4-5.1 [178/307] installing eglibc-x86-arm-2.13-8.3 [179/307] installing elfutils-libelf-x86-arm-0.152-8.2 [180/307] installing elfutils-libs-x86-arm-0.152-8.5 [181/307] installing fontconfig-devel-2.9.0-2.1 [182/307] installing gmp-x86-arm-5.0.1-8.2 [183/307] installing libacl-x86-arm-2.2.49-8.2 [184/307] installing libattr-x86-arm-2.4.44-8.2 [185/307] installing libcap-x86-arm-2.21-8.2 [186/307] installing libfile-x86-arm-5.04-8.2 [187/307] installing libgcc-x86-arm-4.5.3-8.2 [188/307] installing liblua-x86-arm-5.1.4-8.2 [189/307] installing mpc-x86-arm-0.9-8.2 [190/307] installing mpfr-x86-arm-3.0.0-8.2 [191/307] installing ncurses-libs-x86-arm-5.7-8.2 [192/307] installing nspr-x86-arm-4.8.7-8.5 [193/307] installing nss-softokn-freebl-x86-arm-3.12.9-8.5 [194/307] installing nss-x86-arm-3.12.9-8.5 [195/307] installing perl-ExtUtils-MakeMaker-6.36-61.5 [196/307] installing popt-x86-arm-1.16-8.2 [197/307] installing sqlite-x86-arm-3.7.13-8.2 [198/307] installing xz-libs-x86-arm-5.0.3-8.2 [199/307] installing zlib-x86-arm-1.2.5-8.2 [200/307] installing libXdamage-1.1.3-3.1 [201/307] installing libXgesture-0.1.0-3.1 [202/307] installing libXi-1.6.1-1.1 [203/307] installing libXinerama-1.1.2-1.1 [204/307] installing libXv-1.0.7-1.1 [205/307] installing libcurl-devel-7.28.1-1.1 [206/307] installing libdri2-0.1.0-11.1 [207/307] installing libX11-devel-1.5.0-2.2 [208/307] installing libXcursor-1.1.13-1.1 [209/307] installing libXrandr-1.4.0-3.1 [210/307] installing libxml2-devel-2.7.8-8.1 [211/307] installing ecore-fb-1.7.1+svn.77580+build11r02-3.1 [212/307] installing libXft-2.3.1-1.1 [213/307] installing libslp-db-util-devel-0.1.1-5.1 [214/307] installing curl-7.28.1-1.1 [215/307] installing ecore-con-1.7.1+svn.77580+build11r02-3.1 [216/307] installing cmake-2.8.5-1.2 [217/307] installing cairo-1.12.12-5.1 [218/307] installing gcc-4.5.3-1.1 [219/307] installing dbus-devel-1.6.4-5.1 [220/307] installing perl-CPAN-1.9205-61.5 [221/307] installing bash-x86-arm-4.1-8.2 [222/307] installing dbus-glib-0.100-4.1 [223/307] installing fdupes-x86-arm-1.40-8.2 [224/307] installing findutils-x86-arm-4.2.31-8.2 [225/307] installing gawk-x86-arm-3.1.5-8.2 mv: cannot stat `/bin/pgawk-3.1.5': No such file or directory mv: cannot stat `/bin/pgawk': No such file or directory [226/307] installing gzip-x86-arm-1.3.14-8.2 [227/307] installing make-x86-arm-3.81-8.2 [228/307] installing patch-x86-arm-2.6.1.169-8.2 [229/307] installing sed-x86-arm-4.1.5-8.2 [230/307] installing diffutils-x86-arm-3.0-8.2 [231/307] installing libXtst-1.2.0-3.1 [232/307] installing autoconf-2.68-1.1 [233/307] installing coreutils-x86-arm-6.9-8.2 [234/307] installing file-x86-arm-5.04-8.2 [235/307] installing tar-x86-arm-1.17-8.2 [236/307] installing harfbuzz-0.9.7-1.1 [237/307] installing ecore-file-1.7.1+svn.77580+build11r02-3.1 [238/307] installing ecore-ipc-1.7.1+svn.77580+build11r02-3.1 [239/307] installing elfutils-x86-arm-0.152-8.5 [240/307] installing systemd-43-2.2 [241/307] installing gcc-c++-4.5.3-1.1 [242/307] installing libslp-utilx-0.1.22-1.1 [243/307] installing rpm-4.9.1-4.1 [244/307] installing harfbuzz-devel-0.9.7-1.1 [245/307] installing automake-1.11.1-3.1 [246/307] installing efreet-1.7.1+svn.77412slp2+build02-1.1 [247/307] installing vconf-0.2.45-3.1 Running in chroot, ignoring request. [248/307] installing security-server-0.0.72-1.1 Running in chroot, ignoring request. Running in chroot, ignoring request. [249/307] installing udev-182-6.2 Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. [250/307] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [251/307] installing pango-1.31.0-1.1 (pango-querymodules:14594): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0) [252/307] installing rpm-libs-4.9.1-4.1 [253/307] installing evas-1.7.1+svn.77561+build08r04-1.2 [254/307] installing ecore-x-1.7.1+svn.77580+build11r02-3.1 [255/307] installing vconf-keys-devel-0.2.45-3.1 [256/307] installing libudev-182-6.2 [257/307] installing rpm-libs-x86-arm-4.9.1-8.2 [258/307] installing libtool-2.2.6b-1.1 [259/307] installing capi-system-runtime-info-0.0.3-1.2 [260/307] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 mv: cannot stat `/usr/bin/gprov': No such file or directory [261/307] installing libsecurity-server-client-0.0.72-1.1 [262/307] installing sensor-0.5.26-1.1 [263/307] installing ecore-imf-evas-1.7.1+svn.77580+build11r02-3.1 [264/307] installing ecore-input-evas-1.7.1+svn.77580+build11r02-3.1 [265/307] installing evas-devel-1.7.1+svn.77561+build08r04-1.2 [266/307] installing ail-0.2.68-1.1 /bin/rm: cannot remove `/opt/dbspace/.app_info.db': No such file or directory [AIL_INITDB][D][main,249] AIL_INITDB : 0 [AIL_INITDB][E][initdb_load_directory,122] Failed to access the [/opt/share/applications] because No such file or directory [AIL_INITDB][E][main,259] cannot load opt desktop directory. /var/tmp/rpm-tmp.Z8KaK3: line 25: chsmack: command not found warning: %post(ail-0.2.68-1.1.armv7l) scriptlet failed, exit status 127 [267/307] installing pkgmgr-info-parser-0.0.102-1.1 [268/307] installing gst-plugins-base-0.10.36-22.1 [269/307] installing rpm-build-4.9.1-4.1 [270/307] installing sensor-devel-0.5.26-1.1 [271/307] installing vconf-devel-0.2.45-3.1 [272/307] installing pkgmgr-info-0.0.102-1.1 [273/307] installing rpm-x86-arm-4.9.1-8.2 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [274/307] installing rpm-build-x86-arm-4.9.1-8.2 [275/307] installing ecore-evas-1.7.1+svn.77580+build11r02-3.1 [276/307] installing ail-devel-0.2.68-1.1 [277/307] installing edbus-1.7.1+svn.76526slp2+build01-1.2 [278/307] installing app2sd-0.5.13-1.1 [279/307] installing edje-1.7.1+svn.77330+build31-1.1 [280/307] installing ecore-devel-1.7.1+svn.77580+build11r02-3.1 [281/307] installing efreet-devel-1.7.1+svn.77412slp2+build02-1.1 [282/307] installing edbus-devel-1.7.1+svn.76526slp2+build01-1.2 [283/307] installing edje-devel-1.7.1+svn.77330+build31-1.1 [284/307] installing ethumb-1.7.1+svn.75994slp2+build01-1.2 [285/307] installing emotion-1.7.1+svn.76438slp2+build01-1.2 [286/307] installing aul-0.0.264-2.3 warning: group app does not exist - using root warning: group app does not exist - using root Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. [287/307] installing aul-devel-0.0.264-2.3 [288/307] installing emotion-devel-1.7.1+svn.76438slp2+build01-1.2 [289/307] installing ethumb-devel-1.7.1+svn.75994slp2+build01-1.2 [290/307] installing app-core-common-1.2-46.3 [291/307] installing app-svc-0.1.49-2.1 sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.appsvc.db': No such file or directory chown: cannot access `/opt/dbspace/.appsvc.db-journal': No such file or directory chmod: cannot access `/opt/dbspace/.appsvc.db': No such file or directory chmod: cannot access `/opt/dbspace/.appsvc.db-journal': No such file or directory /var/tmp/rpm-tmp.3aOlg7: line 11: chsmack: command not found /var/tmp/rpm-tmp.3aOlg7: line 12: chsmack: command not found warning: %post(app-svc-0.1.49-2.1.armv7l) scriptlet failed, exit status 127 [292/307] installing notification-0.1.8-1.2 sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.notification.db': No such file or directory chown: cannot access `/opt/dbspace/.notification.db-journal': No such file or directory chmod: cannot access `/opt/dbspace/.notification.db': No such file or directory chmod: cannot access `/opt/dbspace/.notification.db-journal': No such file or directory /var/tmp/rpm-tmp.dsVoVd: line 90: chsmack: command not found [293/307] installing alarm-server-0.4.68-1.2 Running in chroot, ignoring request. Running in chroot, ignoring request. [294/307] installing elementary-1.7.1+svn.77535+build94r06-1.1 [295/307] installing elementary-devel-1.7.1+svn.77535+build94r06-1.1 [296/307] installing libalarm-0.4.68-1.2 [297/307] installing app-core-efl-1.2-46.3 [298/307] installing app-core-common-devel-1.2-46.3 [299/307] installing capi-appfw-application-0.1.0-54.4 [300/307] installing pkgmgr-0.2.78-1.3 getpwuid_r(): failed due to unknown user id (0) [301/307] installing app-core-efl-devel-1.2-46.3 [302/307] installing pkgmgr-installer-0.2.78-1.3 [303/307] installing pkgmgr-client-0.2.78-1.3 [304/307] installing capi-appfw-app-manager-0.1.0-20.9 [305/307] installing ui-gadget-1-0.1.23-1.2 [306/307] installing privacy-manager-server-0.0.3-9.1 Check privacy DB Create privacy DB sqlite3: Error: cannot locate your home directory sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.privacy.db': No such file or directory chmod: cannot access `/opt/dbspace/.privacy.db': No such file or directory [307/307] installing privacy-manager-client-0.0.3-9.1 now finalizing build dir... /var/run/obs/worker/3/build/build: line 1761: /srv/build/root_3/etc/passwd: No such file or directory build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for capi-system-system-settings.spec: 4c4 < Release: 3 --- > Release: 3.3 ----------------------------------------------------------------- ----- building capi-system-system-settings.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.1:Main/standard/16230aab6dd0966ed809a42f2949f6e2-capi-system-system-settings' /home/abuild/rpmbuild/SOURCES/capi-system-system-settings.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.nSyoGM + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf capi-system-system-settings-0.0.2 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-system-settings-0.0.2.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd capi-system-system-settings-0.0.2 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.adKkvs + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-system-system-settings-0.0.2 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED ++ echo 0.0.2 ++ awk 'BEGIN {FS="."}{print $1}' + MAJORVER=0 + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=0.0.2 -DMAJORVER=0 -- The C compiler identification is GNU -- The CXX compiler identification is GNU -- Check for working C compiler: /usr/bin/gcc -- Check for working C compiler: /usr/bin/gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- checking for module 'elementary ecore ecore-x ecore-file dlog vconf appcore-efl capi-base-common glib-2.0 gobject-2.0 fontconfig libxml-2.0' -- found elementary ecore ecore-x ecore-file dlog vconf appcore-efl capi-base-common glib-2.0 gobject-2.0 fontconfig libxml-2.0, version 1.7.99.0;1.7.99.0;1.7.99.0;1.7.99.0;1.0;0.2.45;1.1;0.0.1;2.32.3;2.32.3;2.9.0;2.7.8 -- checking for module 'elementary appcore-efl ecore-imf ecore-x ecore-x eina ecore ecore-evas ecore-input' -- found elementary appcore-efl ecore-imf ecore-x ecore-x eina ecore ecore-evas ecore-input, version 1.7.99.0;1.1;1.7.99.0;1.7.99.0;1.7.99.0;1.7.99.0;1.7.99.0;1.7.99.0;1.7.99.0 -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: CMAKE_INSTALL_LIBDIR INCLUDE_INSTALL_DIR SHARE_INSTALL_PREFIX SYSCONF_INSTALL_DIR -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 + make -j4 /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 -B/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles/progress.marks make -f CMakeFiles/Makefile2 all make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' make -f CMakeFiles/capi-system-system-settings.dir/build.make CMakeFiles/capi-system-system-settings.dir/depend make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' cd /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles/capi-system-system-settings.dir/DependInfo.cmake --color= Scanning dependencies of target capi-system-system-settings make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' make -f CMakeFiles/capi-system-system-settings.dir/build.make CMakeFiles/capi-system-system-settings.dir/build make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles 1 /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles 2 /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles 3 [ 50%] [ 50%] [ 75%] Building C object CMakeFiles/capi-system-system-settings.dir/src/system_setting_platform.c.o Building C object CMakeFiles/capi-system-system-settings.dir/src/system_settings_vconf.c.o /usr/bin/gcc -Dcapi_system_system_settings_EXPORTS -DPREFIX=\"/usr\" -DSLP_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/elementary-1 -I/usr/include/ethumb-1 -I/usr/include/efreet-1 -I/usr/include/e_dbus-1 -I/usr/include/ecore-1 -I/usr/include/emotion-1 -I/usr/include/edje-1 -I/usr/include/evas-1 -I/usr/include/eet-1 -I/usr/include/eina-1 -I/usr/include/eina-1/eina -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/fribidi -I/usr/include/freetype2 -I/usr/include/embryo-1 -I/usr/include/vconf -I/usr/include/appcore -I/usr/include/sensor -I/usr/include/aul -I/usr/include/db-util -I/usr/include/libxml2 -fPIC -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/include -o CMakeFiles/capi-system-system-settings.dir/src/system_setting_platform.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/src/system_setting_platform.c /usr/bin/gcc -Dcapi_system_system_settings_EXPORTS -DPREFIX=\"/usr\" -DSLP_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/elementary-1 -I/usr/include/ethumb-1 -I/usr/include/efreet-1 -I/usr/include/e_dbus-1 -I/usr/include/ecore-1 -I/usr/include/emotion-1 -I/usr/include/edje-1 -I/usr/include/evas-1 -I/usr/include/eet-1 -I/usr/include/eina-1 -I/usr/include/eina-1/eina -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/fribidi -I/usr/include/freetype2 -I/usr/include/embryo-1 -I/usr/include/vconf -I/usr/include/appcore -I/usr/include/sensor -I/usr/include/aul -I/usr/include/db-util -I/usr/include/libxml2 -fPIC -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/include -o CMakeFiles/capi-system-system-settings.dir/src/system_settings_vconf.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/src/system_settings_vconf.c Building C object CMakeFiles/capi-system-system-settings.dir/src/system_settings.c.o /usr/bin/gcc -Dcapi_system_system_settings_EXPORTS -DPREFIX=\"/usr\" -DSLP_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/elementary-1 -I/usr/include/ethumb-1 -I/usr/include/efreet-1 -I/usr/include/e_dbus-1 -I/usr/include/ecore-1 -I/usr/include/emotion-1 -I/usr/include/edje-1 -I/usr/include/evas-1 -I/usr/include/eet-1 -I/usr/include/eina-1 -I/usr/include/eina-1/eina -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/fribidi -I/usr/include/freetype2 -I/usr/include/embryo-1 -I/usr/include/vconf -I/usr/include/appcore -I/usr/include/sensor -I/usr/include/aul -I/usr/include/db-util -I/usr/include/libxml2 -fPIC -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/include -o CMakeFiles/capi-system-system-settings.dir/src/system_settings.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/src/system_settings.c /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/src/system_setting_platform.c: In function '__font_size_get': /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/src/system_setting_platform.c:652:9: warning: unused variable 'err' Linking C shared library libcapi-system-system-settings.so /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-system-system-settings.dir/link.txt --verbose=1 /usr/bin/gcc -fPIC -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/elementary-1 -I/usr/include/ethumb-1 -I/usr/include/efreet-1 -I/usr/include/e_dbus-1 -I/usr/include/ecore-1 -I/usr/include/emotion-1 -I/usr/include/edje-1 -I/usr/include/evas-1 -I/usr/include/eet-1 -I/usr/include/eina-1 -I/usr/include/eina-1/eina -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/fribidi -I/usr/include/freetype2 -I/usr/include/embryo-1 -I/usr/include/vconf -I/usr/include/appcore -I/usr/include/sensor -I/usr/include/aul -I/usr/include/db-util -I/usr/include/libxml2 -fPIC -shared -Wl,-soname,libcapi-system-system-settings.so.0 -o libcapi-system-system-settings.so.0.0.2 CMakeFiles/capi-system-system-settings.dir/src/system_settings.c.o CMakeFiles/capi-system-system-settings.dir/src/system_setting_platform.c.o CMakeFiles/capi-system-system-settings.dir/src/system_settings_vconf.c.o -pthread -lecore_x -lappcore-efl -lelementary -lm -leet -levas -lrt -lecore -leina -lecore_evas -lecore_file -lecore_input -ledje -lefreet -lefreet_mime -lefreet_trash -ledbus -ldbus-1 -lethumb_client -lecore_imf -lecore_con -lappcore-common -lsensor -laul -lX11 -lbundle -lail -lxdgmime -lvconf -lSLP-db-util -lsqlite3 -ldlog -lpthread -licui18n -licuuc -licudata -lgobject-2.0 -lglib-2.0 -lfontconfig -lxml2 /usr/bin/cmake -E cmake_symlink_library libcapi-system-system-settings.so.0.0.2 libcapi-system-system-settings.so.0 libcapi-system-system-settings.so make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles 1 2 3 [ 75%] Built target capi-system-system-settings make -f CMakeFiles/test_gui.dir/build.make CMakeFiles/test_gui.dir/depend make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' cd /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles/test_gui.dir/DependInfo.cmake --color= Scanning dependencies of target test_gui make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' make -f CMakeFiles/test_gui.dir/build.make CMakeFiles/test_gui.dir/build make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles 4 [100%] Building C object CMakeFiles/test_gui.dir/TC_gui/main.c.o /usr/bin/gcc -DPREFIX=\"/usr\" -DSLP_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/elementary-1 -I/usr/include/ethumb-1 -I/usr/include/efreet-1 -I/usr/include/e_dbus-1 -I/usr/include/ecore-1 -I/usr/include/emotion-1 -I/usr/include/edje-1 -I/usr/include/evas-1 -I/usr/include/eet-1 -I/usr/include/eina-1 -I/usr/include/eina-1/eina -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/fribidi -I/usr/include/freetype2 -I/usr/include/embryo-1 -I/usr/include/vconf -I/usr/include/appcore -I/usr/include/sensor -I/usr/include/aul -I/usr/include/db-util -I/usr/include/libxml2 -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/include -o CMakeFiles/test_gui.dir/TC_gui/main.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/TC_gui/main.c /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/TC_gui/main.c: In function '_create_list_winset': /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/TC_gui/main.c:196:6: warning: unused variable 'idx' Linking C executable test_system_settings_gui /usr/bin/cmake -E cmake_link_script CMakeFiles/test_gui.dir/link.txt --verbose=1 /usr/bin/gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/elementary-1 -I/usr/include/ethumb-1 -I/usr/include/efreet-1 -I/usr/include/e_dbus-1 -I/usr/include/ecore-1 -I/usr/include/emotion-1 -I/usr/include/edje-1 -I/usr/include/evas-1 -I/usr/include/eet-1 -I/usr/include/eina-1 -I/usr/include/eina-1/eina -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/fribidi -I/usr/include/freetype2 -I/usr/include/embryo-1 -I/usr/include/vconf -I/usr/include/appcore -I/usr/include/sensor -I/usr/include/aul -I/usr/include/db-util -I/usr/include/libxml2 -fPIC -Wl,--as-needed -Wl,--rpath=/usr/lib CMakeFiles/test_gui.dir/TC_gui/main.c.o -o test_system_settings_gui -rdynamic libcapi-system-system-settings.so.0.0.2 -pthread -lecore_x -lappcore-efl -lelementary -lm -leet -levas -lrt -lecore -leina -lecore_evas -lecore_file -lecore_input -ledje -lefreet -lefreet_mime -lefreet_trash -ledbus -ldbus-1 -lethumb_client -lecore_imf -lecore_con -lappcore-common -lsensor -laul -lX11 -lbundle -lail -lxdgmime -lvconf -lSLP-db-util -lsqlite3 -ldlog -lpthread -licui18n -licuuc -licudata -lgobject-2.0 -lglib-2.0 -lfontconfig -lxml2 make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles 4 [100%] Built target test_gui make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles 0 + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.bkDMFs + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-system-system-settings-0.0.2 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm/usr/share/license + cp -f LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm/usr/share/license/capi-system-system-settings + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm install /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 -B/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' /usr/bin/make -f CMakeFiles/capi-system-system-settings.dir/build.make CMakeFiles/capi-system-system-settings.dir/depend make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' cd /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles/capi-system-system-settings.dir/DependInfo.cmake --color= make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' /usr/bin/make -f CMakeFiles/capi-system-system-settings.dir/build.make CMakeFiles/capi-system-system-settings.dir/build make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' make[2]: Nothing to be done for `CMakeFiles/capi-system-system-settings.dir/build'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles 1 2 3 [ 75%] Built target capi-system-system-settings /usr/bin/make -f CMakeFiles/test_gui.dir/build.make CMakeFiles/test_gui.dir/depend make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' cd /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles/test_gui.dir/DependInfo.cmake --color= make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' /usr/bin/make -f CMakeFiles/test_gui.dir/build.make CMakeFiles/test_gui.dir/build make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' make[2]: Nothing to be done for `CMakeFiles/test_gui.dir/build'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles 4 [100%] Built target test_gui make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2/CMakeFiles 0 /usr/bin/make -f CMakeFiles/Makefile2 preinstall make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' make[1]: Nothing to be done for `preinstall'. make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2' Install the project... /usr/bin/cmake -P cmake_install.cmake -- Install configuration: "" -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm/usr/local/bin/test_system_settings_gui -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm/usr/lib/libcapi-system-system-settings.so.0.0.2 -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm/usr/lib/libcapi-system-system-settings.so.0 -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm/usr/lib/libcapi-system-system-settings.so -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm/usr/include/system -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm/usr/include/system/system_settings.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm/usr/lib/pkgconfig/capi-system-system-settings.pc + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm/usr/share/info/dir + find /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm -regex '.*\.la$' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm -regex '.*\.a$' + xargs rm -f -- + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-system-system-settings-0.0.2 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm/usr/lib/libcapi-system-system-settings.so.0.0.2 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm/usr/local/bin/test_system_settings_gui symlinked /usr/lib/debug/usr/lib/libcapi-system-system-settings.so.0.0.2.debug to /usr/lib/debug/usr/lib/libcapi-system-system-settings.so.debug symlinked /usr/lib/debug/usr/lib/libcapi-system-system-settings.so.0.0.2.debug to /usr/lib/debug/usr/lib/libcapi-system-system-settings.so.0.debug 127 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm Processing files: capi-system-system-settings-0.0.2-3.3.armv7l Provides: libcapi-system-system-settings.so.0 Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig /sbin/ldconfig Requires(postun): /sbin/ldconfig /sbin/ldconfig Requires: libSLP-db-util.so.0 libX11.so.6 libail.so.0 libappcore-common.so.1 libappcore-efl.so.1 libaul.so.0 libbundle.so.0 libc.so.6 libc.so.6(GLIBC_2.4) libcapi-system-system-settings.so.0 libdbus-1.so.3 libdlog.so.0 libecore.so.1 libecore_con.so.1 libecore_evas.so.1 libecore_file.so.1 libecore_imf.so.1 libecore_input.so.1 libecore_x.so.1 libedbus.so.1 libedje.so.1 libeet.so.1 libefreet.so.1 libefreet_mime.so.1 libefreet_trash.so.1 libeina.so.1 libelementary.so.1 libethumb_client.so.1 libevas.so.1 libfontconfig.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libgobject-2.0.so.0 libicudata.so.48 libicui18n.so.48 libicuuc.so.48 libm.so.6 libpthread.so.0 libpthread.so.0(GLIBC_2.4) librt.so.1 libsensor.so.1 libsqlite3.so.0 libvconf.so.0 libxdgmime.so.1 libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) Processing files: capi-system-system-settings-devel-0.0.2-3.3.armv7l Provides: pkgconfig(capi-system-system-settings) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libcapi-system-system-settings.so.0 pkgconfig(capi-base-common) Processing files: capi-system-system-settings-debuginfo-0.0.2-3.3.armv7l Processing files: capi-system-system-settings-debugsource-0.0.2-3.3.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-system-settings-0.0.2-3.3.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-system-settings-0.0.2-3.3.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-system-settings-devel-0.0.2-3.3.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-system-settings-debuginfo-0.0.2-3.3.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-system-settings-debugsource-0.0.2-3.3.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.xoo5E4 + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-system-system-settings-0.0.2 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-system-settings-0.0.2-3.3.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs ... comparing built packages with the former built /usr/lib/build/rpm-check.sh compare /.build.oldpackages/capi-system-system-settings-0.0.2-3.2.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-system-settings-0.0.2-3.3.src.rpm compare /.build.oldpackages/capi-system-system-settings-0.0.2-3.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-system-settings-0.0.2-3.3.armv7l.rpm /usr/lib/libcapi-system-system-settings.so.0.0.2 differs in assembler output --- /tmp/tmp.h1WXcCBvtK 2013-04-26 16:12:34.980600266 +0000 +++ /tmp/tmp.XYel8fga0T 2013-04-26 16:12:34.996601074 +0000 @@ -216,865 +216,478 @@ .word 0xfffffdc4 .word 0x000000d0 -system_setting_vconf_event_cb4: - push {r4, r5, lr} - mov r4, r1 - ldr r5, [pc, # ] ; () - sub sp, # ; 0x24 +system_settings_get_item: + ldr r3, [pc, # ] ; () + ldr r2, [pc, # ] ; () + add r3, pc + push {r4, r5} + ldr.w ip, [r3, r2] + ldr.w r4, [ip] + cmp.w r4, # + beq.n + movs r5, # + cmp r4, r0 + bne.n + b.n + cmp r4, r0 + beq.n + ldr.w r4, [ip, # ] + adds r5, # + add.w ip, ip, # + cmp.w r4, # + bne.n + mov r0, r4 + pop {r4, r5} + bx lr + movs r5, # + lsls r0, r5, # + ldr r2, [r3, r2] + lsls r5, r5, # + subs r3, r5, r0 + movs r0, # + adds r3, r3, r2 + str r3, [r1, # ] + b.n + nop + .word 0x0000a05c + .word 0x000000d4 + +system_settings_get_value: + push {r4, r5, r6, r7, lr} + sub sp, # ; 0x2c + mov r6, r1 + add r1, sp, # ; 0x24 + mov r4, r0 + mov r7, r2 + blx <_init + ofs> + ldr r5, [pc, # ] ; () add r5, pc - cbz r0, - mov r0, r1 - add r1, sp, # + cmp r0, # + bne.n + ldr r2, [sp, # ] ; 0x24 + ldr r1, [r2, # ] + cmp r1, r6 + bne.n + ldr r6, [r2, # ] + cmp r6, # + beq.n + mov r0, r4 + mov r2, r7 + blx r6 + add sp, # ; 0x2c + pop {r4, r5, r6, r7, pc} + str r0, [sp, # ] blx <_init + ofs> - cbnz r0, ldr r3, [sp, # ] - mov r0, r4 + cbnz r0, + mvn.w r0, # + b.n + mov r0, r3 + ldr.w lr, [pc, # ] ; + ldr.w ip, [pc, # ] ; + mvn.w r4, # + ldr r2, [pc, # ] ; () movs r1, # - ldr r3, [r3, # ] - blx r3 - add sp, # ; 0x24 - pop {r4, r5, pc} - blx <_init + ofs> - cmp r0, # - beq.n - ldr r1, [pc, # ] ; () - movs r0, # - ldr r2, [pc, # ] ; () - adds r1, r5, r1 - ldr r3, [pc, # ] ; () - adds r1, # ; 0x42 - str r1, [sp, # ] - ldr r1, [pc, # ] ; () + ldr r3, [pc, # ] ; () + add ip, r5 adds r2, r5, r2 + add.w ip, ip, # ; 0x42 adds r3, r5, r3 - adds r5, r5, r1 - movs r1, # ; 0xb3 - str r1, [sp, # ] - mvn.w r1, # - str r1, [sp, # ] - movs r1, # - str r5, [sp, # ] - adds r5, # + add r5, lr + add.w lr, r5, # + str.w ip, [sp] str r5, [sp, # ] + mov.w ip, # ; 0x93 + str.w lr, [sp, # ] + str.w ip, [sp, # ] + str r4, [sp, # ] blx <_init + ofs> - b.n - nop - .word 0x0000a058 - .word 0xffff7300 - .word 0xffff72ac - .word 0xffff72c4 - .word 0xffff716c - -system_setting_vconf_event_cb3: - push {r4, r5, lr} - mov r4, r1 - ldr r5, [pc, # ] ; () - sub sp, # ; 0x24 - add r5, pc - cbz r0, - mov r0, r1 - add r1, sp, # - blx <_init + ofs> - cbnz r0, - ldr r3, [sp, # ] mov r0, r4 - movs r1, # - ldr r3, [r3, # ] - blx r3 - add sp, # ; 0x24 - pop {r4, r5, pc} + b.n blx <_init + ofs> cmp r0, # - beq.n - movs r0, # ; 0xa2 - ldr r1, [pc, # ] ; () - str r0, [sp, # ] - ldr r2, [pc, # ] ; () - adds r1, r5, r1 - ldr r0, [pc, # ] ; () - adds r1, # ; 0x42 - ldr r3, [pc, # ] ; () + beq.n + ldr.w lr, [pc, # ] ; + mvn.w r4, # + ldr.w ip, [pc, # ] ; + movs r0, # + ldr r2, [pc, # ] ; () + movs r1, # + ldr r3, [pc, # ] ; () + add ip, r5 adds r2, r5, r2 - str r1, [sp, # ] - mvn.w r1, # + add.w ip, ip, # ; 0x42 adds r3, r5, r3 - adds r5, r5, r0 - add.w r0, r5, # ; 0x40 - str r1, [sp, # ] - str r0, [sp, # ] - movs r1, # - movs r0, # - adds r5, # ; 0x60 + add r5, lr + add.w lr, r5, # + str.w ip, [sp] str r5, [sp, # ] + mov.w ip, # ; 0x8d + str.w lr, [sp, # ] + str.w ip, [sp, # ] + str r4, [sp, # ] blx <_init + ofs> - b.n - nop - .word 0x00009fe8 - .word 0xffff7300 - .word 0xffff72ac - .word 0xffff716c - .word 0xffff72c4 compare /.build.oldpackages/capi-system-system-settings-debuginfo-0.0.2-3.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-system-settings-debuginfo-0.0.2-3.3.armv7l.rpm --- /tmp/tmp.piBhivqJYO 2013-04-26 16:12:35.140608340 +0000 +++ /tmp/tmp.SftSQ9mC29 2013-04-26 16:12:35.152608946 +0000 @@ -3,9 +3,9 @@ /usr/lib/debug/.build-id/3b/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/.build-id/3b/b0ddc885a568e0c2b7a88fe8705f5fd5058ae4 0 (none) 120777 root root 0 4294967295 ../../../../local/bin/test_system_settings_gui /usr/lib/debug/.build-id/3b/b0ddc885a568e0c2b7a88fe8705f5fd5058ae4.debug 0 (none) 120777 root root 0 4294967295 ../../usr/local/bin/test_system_settings_gui.debug -/usr/lib/debug/.build-id/dc/ 0 (none) 40755 root root 0 4294967295 -/usr/lib/debug/.build-id/dc/6a31bf1499d2873801e94ec5c4b88514177d2c 0 (none) 120777 root root 0 4294967295 ../../../libcapi-system-system-settings.so.0.0.2 -/usr/lib/debug/.build-id/dc/6a31bf1499d2873801e94ec5c4b88514177d2c.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcapi-system-system-settings.so.0.0.2.debug +/usr/lib/debug/.build-id/6c/ 0 (none) 40755 root root 0 4294967295 +/usr/lib/debug/.build-id/6c/01e5c8914e89673b06399a9e1d10c3beb9bba8 0 (none) 120777 root root 0 4294967295 ../../../libcapi-system-system-settings.so.0.0.2 +/usr/lib/debug/.build-id/6c/01e5c8914e89673b06399a9e1d10c3beb9bba8.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcapi-system-system-settings.so.0.0.2.debug /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/usr/lib/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/usr/lib/libcapi-system-system-settings.so.0.0.2.debug 0 (none) 100444 root root 0 4294967295 RPM meta information is different compare /.build.oldpackages/capi-system-system-settings-debugsource-0.0.2-3.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-system-settings-debugsource-0.0.2-3.3.armv7l.rpm compare /.build.oldpackages/capi-system-system-settings-devel-0.0.2-3.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-system-settings-devel-0.0.2-3.3.armv7l.rpm w11 finished "build capi-system-system-settings.spec" at Fri Apr 26 16:12:35 UTC 2013.