Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_2 Using BUILD_ARCH=armv7el w06 started "build python-pycurl.spec" at Thu Apr 25 17:39:56 UTC 2013. Building python-pycurl for project 'Tizen:2.1:Main' repository 'standard' arch 'armv7el' srcmd5 'e2d06f8fefc0105c28943f01c9189526' processing specfile /srv/build/root_2/.build-srcdir/python-pycurl.spec ... running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/python-pycurl.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/python-pycurl.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/55] preinstalling nss... [2/55] preinstalling libfile-x86-arm... [3/55] preinstalling elfutils-libelf-x86-arm... [4/55] preinstalling nss-softokn-freebl-x86-arm... [5/55] preinstalling nss-x86-arm... [6/55] preinstalling nspr-x86-arm... [7/55] preinstalling libgcc-x86-arm... [8/55] preinstalling libacl-x86-arm... [9/55] preinstalling libattr-x86-arm... [10/55] preinstalling libcap-x86-arm... [11/55] preinstalling liblua-x86-arm... [12/55] preinstalling popt-x86-arm... [13/55] preinstalling xz-libs-x86-arm... [14/55] preinstalling zlib-x86-arm... [15/55] preinstalling file... [16/55] preinstalling sqlite-x86-arm... [17/55] preinstalling mpfr-x86-arm... [18/55] preinstalling gmp-x86-arm... [19/55] preinstalling mpc-x86-arm... [20/55] preinstalling bzip2-libs-x86-arm... [21/55] preinstalling rpm-x86-arm... [22/55] preinstalling rpm-libs-x86-arm... [23/55] preinstalling tizen-accelerator... [24/55] preinstalling eglibc-x86-arm... [25/55] preinstalling ncurses-libs-x86-arm... [26/55] preinstalling bash-x86-arm... [27/55] preinstalling rpm... [28/55] preinstalling rpm-libs... [29/55] preinstalling setup... [30/55] preinstalling filesystem... [31/55] preinstalling bash... [32/55] preinstalling bzip2... [33/55] preinstalling coreutils... [34/55] preinstalling diffutils... [35/55] preinstalling liblua... [36/55] preinstalling eglibc... [37/55] preinstalling eglibc-common... [38/55] preinstalling libacl... [39/55] preinstalling libattr... [40/55] preinstalling libgcc... [41/55] preinstalling libcap... [42/55] preinstalling popt... [43/55] preinstalling readline... [44/55] preinstalling sed... [45/55] preinstalling tar... [46/55] preinstalling zlib... [47/55] preinstalling sqlite... [48/55] preinstalling ncurses-libs... [49/55] preinstalling elfutils-libelf... [50/55] preinstalling bzip2-libs... [51/55] preinstalling libstdc++... [52/55] preinstalling libfile... [53/55] preinstalling xz-libs... [54/55] preinstalling nspr... [55/55] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: bash -> eglibc -> eglibc-common -> coreutils breaking dependency eglibc-common -> coreutils cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> findutils breaking dependency eglibc-common -> findutils cycle: eglibc -> eglibc-common -> grep breaking dependency grep -> eglibc cycle: eglibc -> eglibc-common -> grep -> libgcc breaking dependency grep -> libgcc cycle: eglibc -> eglibc-common -> grep -> libpcre breaking dependency libpcre -> eglibc cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc breaking dependency libpcre -> libgcc cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ breaking dependency libstdc++ -> eglibc cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc breaking dependency eglibc-common -> grep cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/150] [2/150] installing kernel-headers-2.6.36-1.1 [3/150] installing tizen-release-2.1.0-1.1 [4/150] installing tzdata-2011h-1.1 [5/150] installing libgcc-4.5.3-1.1 [6/150] installing setup-0.1-2.1 [7/150] installing filesystem-0.1-1.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [8/150] installing eglibc-2.13-1.7 [9/150] installing libstdc++-4.5.3-1.1 [10/150] installing eglibc-common-2.13-1.7 /var/tmp/rpm-tmp.xYvUv1: line 2: /bin/grep: No such file or directory /var/tmp/rpm-tmp.xYvUv1: line 2: /usr/bin/xargs: No such file or directory [11/150] installing libstdc++-devel-4.5.3-1.1 [12/150] installing bash-4.1-3.1 [13/150] installing bzip2-libs-1.0.5-4.1 [14/150] installing cpio-2.8-3.1 [15/150] installing diffutils-3.0-3.1 [16/150] installing e2fsprogs-libs-1.41.9-2.4 [17/150] installing elfutils-libelf-0.152-1.6 [18/150] installing fdupes-1.40-42.1 [19/150] installing findutils-4.2.31-1.1 [20/150] installing gdbm-1.8.3-1.1 [21/150] installing libattr-2.4.44-7.3 [22/150] installing libgomp-4.5.3-1.1 [23/150] installing libidn-1.15-6.1 [24/150] installing liblua-5.1.4-6.1 [25/150] installing libuuid-2.20.2-1.1 [26/150] installing lzo-2.03-1.1 [27/150] installing m4-1.4.14-1.1 [28/150] installing make-3.81-1.1 [29/150] installing net-tools-1.60-87.2 [30/150] installing nspr-4.8.7-1.6 [31/150] installing nss-softokn-freebl-3.12.9-3.8 [32/150] installing patch-2.6.1.169-1.1 [33/150] installing pkgconfig-0.25-3.1 [34/150] installing popt-1.16-3.1 [35/150] installing readline-5.2-13.4 [36/150] installing sed-4.1.5-2.1 [37/150] installing sqlite-3.7.13-1.1 [38/150] installing xz-libs-5.0.3-1.1 [39/150] installing zlib-1.2.5-2.5 [40/150] installing gmp-5.0.1-1.1 [41/150] installing libpcre-7.7-2.1 [42/150] installing ncurses-libs-5.7-4.1 [43/150] installing build-compare-2009.10.14-26.5 [44/150] installing eglibc-headers-2.13-1.7 [45/150] installing libcap-2.21-1.1 [46/150] installing unzip-6.0-9.3 [47/150] installing zlib-devel-1.2.5-2.5 [48/150] installing c-ares-1.7.4-2.1 [49/150] installing grep-2.5.1a-62.1 [50/150] installing libacl-2.2.49-1.1 [51/150] installing libfile-5.04-1.1 [52/150] installing libpython-2.7.1-1.6 [53/150] installing lzo-minilzo-2.03-1.1 [54/150] installing mpfr-3.0.0-1.1 [55/150] installing ncurses-5.7-4.1 [56/150] installing binutils-2.22-1.1 [57/150] installing bzip2-1.0.5-4.1 [58/150] installing libblkid-2.20.2-1.1 [59/150] installing xz-5.0.3-1.1 [60/150] installing elfutils-libs-0.152-1.6 [61/150] installing nss-3.12.9-3.8 [62/150] installing perl-5.12.1-61.5 [63/150] installing ncurses-base-5.7-4.1 [64/150] installing perl-HTML-Tagset-3.20-8.1 [65/150] installing perl-IO-Compress-Base-2.008-61.5 [66/150] installing perl-Module-Pluggable-3.60-61.5 [67/150] installing perl-Pod-Escapes-1.04-61.5 [68/150] installing perl-TimeDate-1.20-1.1 [69/150] installing c-ares-devel-1.7.4-2.1 [70/150] installing eglibc-devel-2.13-1.7 [71/150] installing lzo-devel-2.03-1.1 [72/150] installing perl-Compress-Raw-Zlib-2.008-61.5 [73/150] installing perl-devel-5.12.1-61.5 [74/150] installing perl-libs-5.12.1-61.5 [75/150] installing tar-1.17-4.1 [76/150] installing coreutils-6.9-9.1 [77/150] installing file-5.04-1.1 [78/150] installing libmount-2.20.2-1.1 [79/150] installing mpc-0.9-1.1 [80/150] installing openssl-1.0.1c-1.9 [81/150] installing xz-lzma-compat-5.0.3-1.1 [82/150] installing elfutils-0.152-1.6 [83/150] installing nss-sysinit-3.12.9-3.8 [84/150] installing python-base-2.7.1-1.6 [85/150] installing openssl-devel-1.0.1c-1.9 [86/150] installing perl-ExtUtils-ParseXS-2.18-61.5 [87/150] installing perl-Pod-Simple-3.07-61.5 [88/150] installing perl-Test-Simple-0.80-61.5 [89/150] installing tizen-accelerator-1.0.1-1.1 [90/150] installing libidn-devel-1.15-6.1 [91/150] installing perl-IO-Compress-Zlib-2.008-61.5 [92/150] installing perl-Test-Harness-3.12-61.5 [93/150] installing gawk-3.1.5-1.1 [94/150] installing gzip-1.3.14-2.1 [95/150] installing build-2011.01.10a-1.1 [96/150] installing python-devel-2.7.1-1.6 [97/150] installing libcurl-7.28.1-1.1 [98/150] installing cpp-4.5.3-1.1 [99/150] installing util-linux-2.20.2-1.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [100/150] installing bzip2-libs-x86-arm-1.0.5-8.2 [101/150] installing eglibc-x86-arm-2.13-8.3 [102/150] installing elfutils-libelf-x86-arm-0.152-8.2 [103/150] installing elfutils-libs-x86-arm-0.152-8.5 [104/150] installing gmp-x86-arm-5.0.1-8.2 [105/150] installing libacl-x86-arm-2.2.49-8.2 [106/150] installing libattr-x86-arm-2.4.44-8.2 [107/150] installing libcap-x86-arm-2.21-8.2 [108/150] installing libfile-x86-arm-5.04-8.2 [109/150] installing libgcc-x86-arm-4.5.3-8.2 [110/150] installing liblua-x86-arm-5.1.4-8.2 [111/150] installing mpc-x86-arm-0.9-8.2 [112/150] installing mpfr-x86-arm-3.0.0-8.2 [113/150] installing ncurses-libs-x86-arm-5.7-8.2 [114/150] installing nspr-x86-arm-4.8.7-8.5 [115/150] installing nss-softokn-freebl-x86-arm-3.12.9-8.5 [116/150] installing nss-x86-arm-3.12.9-8.5 [117/150] installing perl-ExtUtils-MakeMaker-6.36-61.5 [118/150] installing popt-x86-arm-1.16-8.2 [119/150] installing sqlite-x86-arm-3.7.13-8.2 [120/150] installing xz-libs-x86-arm-5.0.3-8.2 [121/150] installing zlib-x86-arm-1.2.5-8.2 [122/150] installing libcurl-devel-7.28.1-1.1 [123/150] installing curl-7.28.1-1.1 [124/150] installing gcc-4.5.3-1.1 [125/150] installing perl-CPAN-1.9205-61.5 [126/150] installing bash-x86-arm-4.1-8.2 [127/150] installing fdupes-x86-arm-1.40-8.2 [128/150] installing findutils-x86-arm-4.2.31-8.2 [129/150] installing gawk-x86-arm-3.1.5-8.2 mv: cannot stat `/bin/pgawk-3.1.5': No such file or directory mv: cannot stat `/bin/pgawk': No such file or directory [130/150] installing gzip-x86-arm-1.3.14-8.2 [131/150] installing make-x86-arm-3.81-8.2 [132/150] installing patch-x86-arm-2.6.1.169-8.2 [133/150] installing sed-x86-arm-4.1.5-8.2 [134/150] installing diffutils-x86-arm-3.0-8.2 [135/150] installing autoconf-2.68-1.1 [136/150] installing coreutils-x86-arm-6.9-8.2 [137/150] installing file-x86-arm-5.04-8.2 [138/150] installing tar-x86-arm-1.17-8.2 [139/150] installing elfutils-x86-arm-0.152-8.5 [140/150] installing gcc-c++-4.5.3-1.1 [141/150] installing rpm-4.9.1-4.1 [142/150] installing automake-1.11.1-3.1 [143/150] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [144/150] installing rpm-libs-4.9.1-4.1 [145/150] installing rpm-libs-x86-arm-4.9.1-8.2 [146/150] installing libtool-2.2.6b-1.1 [147/150] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 mv: cannot stat `/usr/bin/gprov': No such file or directory [148/150] installing rpm-build-4.9.1-4.1 [149/150] installing rpm-x86-arm-4.9.1-8.2 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [150/150] installing rpm-build-x86-arm-4.9.1-8.2 now finalizing build dir... /var/run/obs/worker/2/build/build: line 1761: /srv/build/root_2/etc/passwd: No such file or directory Warning: spec file parser line 30: can't expand %(...) Warning: spec file parser line 66: can't expand %(...) Warning: spec file parser line 67: can't expand %(...) build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for python-pycurl.spec: 5c5 < Release: 4 --- > Release: 4.5 67a68 > %changelog ----------------------------------------------------------------- ----- building python-pycurl.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.1:Main/standard/e2d06f8fefc0105c28943f01c9189526-python-pycurl' /home/abuild/rpmbuild/SOURCES/python-pycurl.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.RyFuzC + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf python-pycurl-7.19.0 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python-pycurl-7.19.0.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd python-pycurl-7.19.0 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (python-pycurl-no-static-libs.patch):' Patch #0 (python-pycurl-no-static-libs.patch): + /bin/cat /home/abuild/rpmbuild/SOURCES/python-pycurl-no-static-libs.patch + /usr/bin/patch -s -p0 --fuzz=2 + echo 'Patch #1 (python-pycurl-lcrypto.patch):' Patch #1 (python-pycurl-lcrypto.patch): + /bin/cat /home/abuild/rpmbuild/SOURCES/python-pycurl-lcrypto.patch + /usr/bin/patch -s -p1 -b --suffix .lcrypto --fuzz=2 + chmod a-x examples/basicfirst.py examples/file_upload.py examples/linksys.py examples/retriever-multi.py examples/retriever.py examples/sfquery.py examples/xmlrpc_curl.py + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.qzeQ8T + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd python-pycurl-7.19.0 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED + cp /home/abuild/rpmbuild/SOURCES/python-pycurl.manifest . + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DHAVE_CURL_OPENSSL' + /usr/bin/python setup.py build Using curl-config (libcurl 7.28.1) running build running build_py creating build creating build/lib.linux-armv7l-2.7 creating build/lib.linux-armv7l-2.7/curl copying python/curl/__init__.py -> build/lib.linux-armv7l-2.7/curl running build_ext building 'pycurl' extension creating build/temp.linux-armv7l-2.7 creating build/temp.linux-armv7l-2.7/src gcc -pthread -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DHAVE_CURL_OPENSSL -fPIC -DHAVE_CURL_OPENSSL=1 -DHAVE_CURL_OPENSSL=1 -DHAVE_CURL_SSL=1 -I/usr/include/python2.7 -c src/pycurl.c -o build/temp.linux-armv7l-2.7/src/pycurl.o src/pycurl.c: In function 'do_multi_info_read': src/pycurl.c:2843:15: warning: call to '_curl_easy_getinfo_err_string' declared with attribute warning: curl_easy_getinfo expects a pointer to char * for this info In function 'util_curl_unsetopt', inlined from 'do_curl_unsetopt' at src/pycurl.c:1551:5: src/pycurl.c:1476:9: warning: call to '_curl_easy_setopt_err_CURLSH' declared with attribute warning: curl_easy_setopt expects a CURLSH* argument for this option src/pycurl.c: In function 'multi_socket_callback': src/pycurl.c:2355:11: warning: call to '_curl_easy_getinfo_err_string' declared with attribute warning: curl_easy_getinfo expects a pointer to char * for this info gcc -pthread -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DHAVE_CURL_OPENSSL build/temp.linux-armv7l-2.7/src/pycurl.o -L/usr/lib -lcurl -lcares -lidn -lssl -lcrypto -lrt -lssl -lcrypto -lz -lcrypto -lpython2.7 -o build/lib.linux-armv7l-2.7/pycurl.so + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.IwglTh + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd python-pycurl-7.19.0 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm + /usr/bin/python setup.py install -O1 --skip-build --root /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm --prefix /usr Using curl-config (libcurl 7.28.1) running install running install_lib creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/lib creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/lib/python2.7 creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/lib/python2.7/site-packages creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/lib/python2.7/site-packages/curl copying build/lib.linux-armv7l-2.7/curl/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/lib/python2.7/site-packages/curl copying build/lib.linux-armv7l-2.7/pycurl.so -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/lib/python2.7/site-packages byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/lib/python2.7/site-packages/curl/__init__.py to __init__.pyc writing byte-compilation script '/tmp/tmpUAYh1S.py' /usr/bin/python -O /tmp/tmpUAYh1S.py removing /tmp/tmpUAYh1S.py running install_data creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl copying ChangeLog -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl copying COPYING -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl copying COPYING2 -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl copying INSTALL -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl copying README -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl copying TODO -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/html copying doc/callbacks.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/html copying doc/curlshareobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/html copying doc/curlobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/html copying doc/pycurl.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/html copying doc/curlmultiobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/html creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/examples copying examples/linksys.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/examples copying examples/sfquery.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/examples copying examples/xmlrpc_curl.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/examples copying examples/retriever-multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/examples copying examples/file_upload.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/examples copying examples/retriever.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/examples copying examples/basicfirst.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/examples creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_cb.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_gtk.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_ftp.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_multi4.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_socketopen.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_post3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_multi_socket_select.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/util.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_memleak.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_multi6.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_multi_vs_thread.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_getinfo.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_post.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_xmlrpc.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_multi3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_post2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_multi5.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_stringio.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_debug.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_multi_timer.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_share.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_internals.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_multi_socket.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests copying tests/test_multi2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/share/doc/pycurl/tests running install_egg_info Writing /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/lib/python2.7/site-packages/pycurl-7.19.0-py2.7.egg-info + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/python-pycurl-7.19.0 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/lib/python2.7/site-packages/pycurl.so 246 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile Bytecompiling .py files below /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm/usr/lib/python2.7/ using /usr/bin/python2.7 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.GnBceD + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd python-pycurl-7.19.0 + unset DISPLAY + export 'PYTHONPATH=/home/abuild/rpmbuild/BUILD/python-pycurl-7.19.0/build/lib*' + PYTHONPATH='/home/abuild/rpmbuild/BUILD/python-pycurl-7.19.0/build/lib*' + /usr/bin/python tests/test_internals.py -q gc: collectable gc: collectable gc: collectable gc: collectable Python 2.7.1 (r271:86832, Apr 23 2013, 10:11:51) [GCC] PycURL libcurl/7.28.1 OpenSSL/1.0.1c zlib/1.2.5 c-ares/1.7.4 libidn/1.15 (compiled against 0x71c01) PycURL version info (3, '7.28.1', 465921, 'armv7l-unknown-linux-gnueabi', 59100, 'OpenSSL/1.0.1c', 0, '1.2.5', ('dict', 'file', 'ftp', 'ftps', 'gopher', 'http', 'https', 'imap', 'imaps', 'pop3', 'pop3s', 'rtsp', 'smtp', 'smtps', 'telnet', 'tftp'), '1.7.4', 67332, '1.15') build/lib.linux-armv7l-2.7/pycurl.so, compiled Apr 25 2013 17:40:27 All tests passed. + exit 0 Processing files: python-pycurl-7.19.0-4.5.armv7l Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv cmVxdWVzdD4KPC9tYW5pZmVzdD4K Provides: pycurl = 7.19.0-4.5 pycurl.so Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcares.so.2 libcrypto.so.1.0.0 libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libidn.so.11 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libpython2.7.so.1.0 librt.so.1 libssl.so.1.0.0 libz.so.1 python(abi) = 2.7 Processing files: python-pycurl-debuginfo-7.19.0-4.5.armv7l Processing files: python-pycurl-debugsource-7.19.0-4.5.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm Wrote: /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-4.5.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-4.5.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-4.5.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-4.5.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.QzXKGq + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd python-pycurl-7.19.0 + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.5.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs ... comparing built packages with the former built /usr/lib/build/rpm-check.sh compare /.build.oldpackages/python-pycurl-7.19.0-4.4.src.rpm /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-4.5.src.rpm compare /.build.oldpackages/python-pycurl-7.19.0-4.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-4.5.armv7l.rpm --- /tmp/tmp.j0lKBXdZSv 2013-04-25 17:40:48.984073867 +0000 +++ /tmp/tmp.RQWpVzlf0j 2013-04-25 17:40:48.992074275 +0000 @@ -7,9 +7,9 @@ libc.so.6(GLIBC_2.4) 16384 libcares.so.2 16384 libcrypto.so.1.0.0 16384 -libcurl 12 7.21.3 +libcurl 12 7.28.1 libcurl.so.4 16384 -libcurl.so.4(CURL_OPENSSL_3) 16384 +libcurl.so.4(CURL_OPENSSL_4) 16384 libgcc_s.so.1 16384 libgcc_s.so.1(GCC_3.5) 16384 libidn.so.11 16384 RPM meta information is different compare /.build.oldpackages/python-pycurl-debuginfo-7.19.0-4.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-4.5.armv7l.rpm --- /tmp/tmp.ErbwvUJhMk 2013-04-25 17:40:49.100079795 +0000 +++ /tmp/tmp.ootkTJmKQh 2013-04-25 17:40:49.108080204 +0000 @@ -1,8 +1,8 @@ /usr/lib/debug/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/.build-id/ 0 (none) 40755 root root 0 4294967295 -/usr/lib/debug/.build-id/12/ 0 (none) 40755 root root 0 4294967295 -/usr/lib/debug/.build-id/12/21acd3f2764481332c406ea5907c1502ea4bbc 0 (none) 120777 root root 0 4294967295 ../../../python2.7/site-packages/pycurl.so -/usr/lib/debug/.build-id/12/21acd3f2764481332c406ea5907c1502ea4bbc.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/python2.7/site-packages/pycurl.so.debug +/usr/lib/debug/.build-id/be/ 0 (none) 40755 root root 0 4294967295 +/usr/lib/debug/.build-id/be/a4a6f25ebf44cf1eb63d0af0035f99e27e519c 0 (none) 120777 root root 0 4294967295 ../../../python2.7/site-packages/pycurl.so +/usr/lib/debug/.build-id/be/a4a6f25ebf44cf1eb63d0af0035f99e27e519c.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/python2.7/site-packages/pycurl.so.debug /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/usr/lib/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/usr/lib/python2.7/ 0 (none) 40755 root root 0 4294967295 RPM meta information is different compare /.build.oldpackages/python-pycurl-debugsource-7.19.0-4.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-4.5.armv7l.rpm w06 finished "build python-pycurl.spec" at Thu Apr 25 17:40:49 UTC 2013.