[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w06 started "build eeze.spec" at Wed Jul 17 06:08:51 UTC 2013. [ 0s] [ 0s] Building eeze for project 'Tizen:2.2:Main' repository 'emulator' arch 'i586' srcmd5 '3562e3358df09e9c75add3870f1df2b4' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/eeze.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/eeze.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/eeze.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/30] preinstalling libgcc... [ 0s] [2/30] preinstalling setup... [ 0s] [3/30] preinstalling filesystem... [ 0s] [4/30] preinstalling eglibc... [ 0s] [5/30] preinstalling bzip2-libs... [ 0s] [6/30] preinstalling elfutils-libelf... [ 0s] [7/30] preinstalling libattr... [ 0s] [8/30] preinstalling liblua... [ 0s] [9/30] preinstalling ncurses-libs... [ 0s] [10/30] preinstalling nspr... [ 0s] [11/30] preinstalling nss-softokn-freebl... [ 0s] [12/30] preinstalling popt... [ 0s] [13/30] preinstalling readline... [ 0s] [14/30] preinstalling sed... [ 0s] [15/30] preinstalling sqlite... [ 0s] [16/30] preinstalling xz-libs... [ 0s] [17/30] preinstalling zlib... [ 0s] [18/30] preinstalling bash... [ 0s] [19/30] preinstalling diffutils... [ 1s] [20/30] preinstalling libstdc++... [ 1s] [21/30] preinstalling eglibc-common... [ 1s] [22/30] preinstalling libacl... [ 1s] [23/30] preinstalling libcap... [ 1s] [24/30] preinstalling libfile... [ 1s] [25/30] preinstalling bzip2... [ 1s] [26/30] preinstalling nss... [ 1s] [27/30] preinstalling tar... [ 1s] [28/30] preinstalling coreutils... [ 1s] [29/30] preinstalling rpm-libs... [ 1s] [30/30] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 1s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm-libs -> rpm [ 2s] breaking dependency rpm -> rpm-libs [ 2s] done [ 2s] booting kvm ... [ 2s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_6/root,if=virtio,cache=unsafe -drive file=/srv/build/root_6/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_6/swap,if=virtio,cache=unsafe -smp 4 [ 3s]  [ 3s] Google, Inc. [ 3s] Serial Graphics Adapter 09/05/12 [ 3s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 3s] 4 0 [ 3s]  SeaBIOS (version 1.6.3-20120905_140109) [ 3s] [ 4s] Booting from ROM... [ 6s] doing fast boot [ 6s] Creating device nodes with udev [ 6s] udevd[213]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 6s] [ 7s] Waiting for device /dev/vda to appear: ok [ 7s] fsck from util-linux 2.20.1 [ 7s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 7s] /dev/vda: clean, 6178/2097152 files, 204332/8388608 blocks [ 7s] fsck succeeded. Mounting root device read-write. [ 7s] Mounting root /dev/vda [ 7s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 7s] replacing /etc/mtab with symlink to /proc/self/mounts [ 7s] sh: /sbin/modprobe: No such file or directory [ 7s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 8: interpreter '/usr/bin/qemu-arm-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 7s] 2nd stage started in virtual machine [ 7s] machine type: x86_64 [ 7s] switching personality to 8... [ 7s] 2nd stage started in virtual machine [ 7s] machine type: i686 [ 7s] [ 1.731486] EXT4-fs (vda): Cannot change data mode on remount [ 7s] mount: / not mounted or bad option [ 7s] swapon on /dev/vdb [ 7s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 7s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 7s] *********************************** [ 7s] VM_TYPE: kvm script: /.build/build [ 7s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 7s] logging output to //.build.log... [ 7s] processing specfile /.build-srcdir/eeze.spec ... [ 7s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/eeze.spec build rpmlint-Factory ... [ 7s] initializing rpm db... [ 7s] [1/170] installing cloog-0.15.9-1.1 [ 7s] [2/170] installing kernel-headers-3.0.15-1.1 [ 8s] [3/170] installing libX11-common-1.5.0-3.1 [ 8s] [4/170] installing tizen-release-2.2.0-1.1 [ 8s] [5/170] installing tzdata-2011h-1.1 [ 8s] [6/170] installing libgcc-4.5.3-1.2 [ 8s] [7/170] installing setup-0.1-1.1 [ 8s] [8/170] installing filesystem-0.1-1.1 [ 8s] warning: group lock does not exist - using root [ 8s] warning: group mail does not exist - using root [ 8s] [9/170] installing eglibc-2.13-1.4 [ 8s] [10/170] installing libstdc++-4.5.3-1.2 [ 9s] [11/170] installing bzip2-libs-1.0.5-4.1 [ 9s] [12/170] installing cpio-2.8-3.1 [ 9s] [13/170] installing e2fsprogs-libs-1.41.9-2.4 [ 9s] [14/170] installing elfutils-libelf-0.152-1.8 [ 9s] [15/170] installing expat-2.0.1-8.1 [ 9s] [16/170] installing findutils-4.2.31-1.1 [ 9s] [17/170] installing fribidi-0.19.5-5.1 [ 9s] [18/170] installing gdbm-1.8.3-1.1 [ 9s] [19/170] installing kmod-5-4.1 [ 9s] [20/170] installing libICE-1.0.8-1.1 [ 9s] [21/170] installing libXau-1.0.7-1.1 [ 9s] [22/170] installing libattr-2.4.44-7.2 [ 9s] [23/170] installing libffi-3.0.9-100.1 [ 9s] [24/170] installing libidn-1.15-6.1 [ 9s] [25/170] installing libjpeg-turbo-1.2.0-8.2 [ 9s] [26/170] installing liblua-5.1.4-6.1 [ 9s] [27/170] installing libstdc++-devel-4.5.3-1.2 [ 9s] [28/170] installing libuuid-2.20.2-6.1 [ 9s] [29/170] installing lzo-2.03-1.1 [ 9s] [30/170] installing m4-1.4.14-1.1 [ 9s] [31/170] installing make-3.81-1.1 [ 9s] [32/170] installing net-tools-1.60-87.2 [ 9s] [33/170] installing nspr-4.8.7-1.3 [ 10s] [34/170] installing nss-softokn-freebl-3.12.9-3.6 [ 10s] [35/170] installing patch-2.6.1.169-1.1 [ 10s] [36/170] installing pixman-0.28.2-1.1 [ 10s] [37/170] installing pkgconfig-0.25-2.1 [ 10s] [38/170] installing popt-1.16-3.1 [ 10s] [39/170] installing readline-5.2-13.1 [ 10s] [40/170] installing sed-4.1.5-2.1 [ 10s] [41/170] installing smack-1.0slp2+s11-1.1 [ 10s] [42/170] installing sqlite-3.7.13-1.1 [ 10s] [43/170] installing xz-libs-5.0.3-1.1 [ 10s] [44/170] installing zlib-1.2.5-2.6 [ 10s] [45/170] installing bash-4.1-3.1 [ 10s] [46/170] installing diffutils-3.0-3.1 [ 10s] [47/170] installing libgomp-4.5.3-1.2 [ 10s] [48/170] installing gmp-5.0.1-1.1 [ 10s] [49/170] installing libpcre-7.7-3.1 [ 10s] [50/170] installing ncurses-libs-5.7-4.1 [ 10s] [51/170] installing build-compare-2009.10.14-26.2 [ 10s] [52/170] installing emulator-macros-1-1.1 [ 10s] [53/170] installing c-ares-1.7.4-2.1 [ 10s] [54/170] installing eglibc-headers-2.13-1.4 [ 10s] [55/170] installing freetype-2.4.9-1.1 [ 10s] [56/170] installing fribidi-devel-0.19.5-5.1 [ 11s] [57/170] installing grep-2.5.1a-62.1 [ 11s] [58/170] installing libacl-2.2.49-2.1 [ 11s] [59/170] installing libcap-2.21-1.1 [ 11s] [60/170] installing libfile-5.04-1.1 [ 11s] [61/170] installing libpng-1.2.50-1.1 [ 11s] [62/170] installing libxcb-1.8.1-1.1 [ 11s] [63/170] installing lzo-minilzo-2.03-1.1 [ 11s] [64/170] installing mpfr-3.0.0-1.1 [ 11s] [65/170] installing ncurses-5.7-4.1 [ 11s] [66/170] installing pixman-devel-0.28.2-1.1 [ 11s] [67/170] installing unzip-6.0-9.1 [ 11s] [68/170] installing zlib-devel-1.2.5-2.6 [ 11s] [69/170] installing bzip2-1.0.5-4.1 [ 11s] [70/170] installing glib2-2.32.3-5.1 [ 11s] [71/170] installing libSM-1.2.1-1.1 [ 11s] [72/170] installing libblkid-2.20.2-6.1 [ 11s] [73/170] installing smack-utils-1.0slp2+s11-1.1 [ 12s] [74/170] installing xz-5.0.3-1.1 [ 12s] [75/170] installing binutils-2.22-1.2 [ 12s] [76/170] installing libicu-4.8-1.1 [ 12s] [77/170] installing ppl-0.10.2-10.1 [ 12s] [78/170] installing elfutils-libs-0.152-1.8 [ 12s] [79/170] installing nss-3.12.9-3.6 [ 12s] [80/170] installing perl-5.12.1-61.3 [ 13s] [81/170] installing ncurses-base-5.7-4.1 [ 13s] [82/170] installing perl-HTML-Tagset-3.20-8.1 [ 13s] [83/170] installing perl-IO-Compress-Base-2.008-61.3 [ 13s] [84/170] installing perl-Module-Pluggable-3.60-61.3 [ 13s] [85/170] installing perl-Pod-Escapes-1.04-61.3 [ 13s] [86/170] installing perl-TimeDate-1.20-1.1 [ 13s] [87/170] installing eglibc-devel-2.13-1.4 [ 13s] [88/170] installing perl-Compress-Raw-Zlib-2.008-61.3 [ 13s] [89/170] installing perl-libs-5.12.1-61.3 [ 13s] [90/170] installing tar-1.17-4.1 [ 13s] [91/170] installing coreutils-6.9-9.1 [ 14s] [92/170] installing file-5.04-1.1 [ 14s] [93/170] installing libdlog-0.4.1-16.1 [ 14s] chown: `root:app_logging': invalid user [ 14s] [94/170] installing libmount-2.20.2-6.1 [ 14s] [95/170] installing lzo-devel-2.03-1.1 [ 14s] [96/170] installing mpc-0.9-1.1 [ 14s] [97/170] installing openssl-1.0.1c-1.8 [ 14s] [98/170] installing perl-devel-5.12.1-61.3 [ 14s] [99/170] installing xz-lzma-compat-5.0.3-1.1 [ 14s] [100/170] installing cloog-ppl-0.15.9-1.1 [ 14s] [101/170] installing freetype-devel-2.4.9-1.1 [ 14s] [102/170] installing libX11-1.5.0-3.1 [ 14s] [103/170] installing nss-sysinit-3.12.9-3.6 [ 14s] [104/170] installing elfutils-0.152-1.8 [ 14s] [105/170] installing eglibc-common-2.13-1.4 [ 15s] [106/170] installing udev-182-6.1 [ 15s] [107/170] installing eina-1.7.1+svn.77445+build06-1.1 [ 15s] [108/170] installing libXcomposite-0.4.3-3.1 [ 15s] [109/170] installing libXext-1.3.1-1.1 [ 15s] [110/170] installing libXfixes-5.0-2.1 [ 15s] [111/170] installing libXrender-0.9.7-1.1 [ 15s] [112/170] installing libdlog-devel-0.4.1-16.1 [ 15s] [113/170] installing perl-ExtUtils-ParseXS-2.18-61.3 [ 15s] [114/170] installing perl-Pod-Simple-3.07-61.3 [ 16s] [115/170] installing perl-Test-Simple-0.80-61.3 [ 16s] [116/170] installing gawk-3.1.5-1.1 [ 16s] [117/170] installing gzip-1.3.14-2.1 [ 16s] [118/170] installing libidn-devel-1.15-6.1 [ 16s] [119/170] installing libudev-182-6.1 [ 16s] [120/170] installing perl-IO-Compress-Zlib-2.008-61.3 [ 16s] [121/170] installing perl-Test-Harness-3.12-61.3 [ 16s] [122/170] installing giflib-4.1.6-13.1 [ 16s] [123/170] installing build-2011.01.10a-1.1 [ 16s] [124/170] installing libcurl-7.28.1-2.1 [ 16s] [125/170] installing fontconfig-2.9.0-2.1 [ 18s] [126/170] installing util-linux-2.20.2-6.1 [ 18s] warning: group tty does not exist - using root [ 18s] /bin/chown: `root:root': invalid user [ 18s] [127/170] installing cpp-4.5.3-1.2 [ 18s] [128/170] installing glib2-devel-2.32.3-5.1 [ 19s] [129/170] installing ecore-1.7.1+svn.77580+build25r02-3.1 [ 19s] [130/170] installing eina-devel-1.7.1+svn.77445+build06-1.1 [ 19s] [131/170] installing fontconfig-devel-2.9.0-2.1 [ 19s] [132/170] installing libXdamage-1.1.3-3.1 [ 19s] [133/170] installing libXgesture-0.1.1-3.1 [ 19s] [134/170] installing libXi-1.6.1-1.1 [ 19s] [135/170] installing libXinerama-1.1.2-1.1 [ 19s] [136/170] installing libudev-devel-182-6.1 [ 19s] [137/170] installing perl-ExtUtils-MakeMaker-6.36-61.3 [ 19s] [138/170] installing eet-1.7.1+svn.77495slp2+build01-1.1 [ 19s] [139/170] installing libXcursor-1.1.13-1.1 [ 19s] [140/170] installing libXrandr-1.4.0-3.1 [ 19s] [141/170] installing libcurl-devel-7.28.1-2.1 [ 19s] [142/170] installing simulator-opengl-0.2.17-2.1 [ 19s] [143/170] installing curl-7.28.1-2.1 [ 19s] [144/170] installing cairo-1.12.12-6.1 [ 19s] [145/170] installing gcc-4.5.3-1.2 [ 19s] [146/170] installing perl-CPAN-1.9205-61.3 [ 20s] [147/170] installing ecore-imf-1.7.1+svn.77580+build25r02-3.1 [ 20s] [148/170] installing ecore-input-1.7.1+svn.77580+build25r02-3.1 [ 20s] [149/170] installing eet-devel-1.7.1+svn.77495slp2+build01-1.1 [ 20s] [150/170] installing libXtst-1.2.0-3.1 [ 20s] [151/170] installing autoconf-2.68-1.1 [ 20s] [152/170] installing ecore-con-1.7.1+svn.77580+build25r02-3.1 [ 20s] [153/170] installing harfbuzz-0.9.7-1.1 [ 20s] [154/170] installing gcc-c++-4.5.3-1.2 [ 20s] [155/170] installing rpm-4.9.1-4.1 [ 20s] [156/170] installing harfbuzz-devel-0.9.7-1.1 [ 20s] [157/170] installing automake-1.11.1-3.1 [ 20s] [158/170] installing ecore-fb-1.7.1+svn.77580+build25r02-3.1 [ 20s] [159/170] installing ecore-file-1.7.1+svn.77580+build25r02-3.1 [ 20s] [160/170] installing ecore-ipc-1.7.1+svn.77580+build25r02-3.1 [ 20s] [161/170] installing rpm-libs-4.9.1-4.1 [ 20s] [162/170] installing evas-1.7.1+svn.77561+build31-1.1 [ 21s] [163/170] installing ecore-x-1.7.1+svn.77580+build25r02-3.1 [ 21s] [164/170] installing libtool-2.2.6b-1.1 [ 21s] [165/170] installing ecore-imf-evas-1.7.1+svn.77580+build25r02-3.1 [ 21s] [166/170] installing ecore-input-evas-1.7.1+svn.77580+build25r02-3.1 [ 21s] [167/170] installing evas-devel-1.7.1+svn.77561+build31-1.1 [ 21s] [168/170] installing rpm-build-4.9.1-4.1 [ 21s] [169/170] installing ecore-evas-1.7.1+svn.77580+build25r02-3.1 [ 21s] [170/170] installing ecore-devel-1.7.1+svn.77580+build25r02-3.1 [ 21s] now finalizing build dir... [ 21s] /.build/build: line 2269: //etc/passwd: No such file or directory [ 21s] ----------------------------------------------------------------- [ 21s] I have the following modifications for eeze.spec: [ 21s] 7c7 [ 21s] < Release: 1 [ 21s] --- [ 21s] > Release: 1.1 [ 21s] ----------------------------------------------------------------- [ 21s] ----- building eeze.spec (user abuild) [ 21s] ----------------------------------------------------------------- [ 21s] ----------------------------------------------------------------- [ 21s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.2:Main/emulator/3562e3358df09e9c75add3870f1df2b4-eeze' /home/abuild/rpmbuild/SOURCES/eeze.spec [ 21s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.mBuA2T [ 21s] + umask 022 [ 21s] + cd /home/abuild/rpmbuild/BUILD [ 21s] + LANG=C [ 21s] + export LANG [ 21s] + unset DISPLAY [ 21s] + cd /home/abuild/rpmbuild/BUILD [ 21s] + rm -rf eeze-1.7.0+svn.77230+build04r01 [ 21s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/eeze-1.7.0+svn.77230+build04r01.tar.gz [ 21s] + /bin/tar -xf - [ 21s] + STATUS=0 [ 21s] + '[' 0 -ne 0 ']' [ 21s] + cd eeze-1.7.0+svn.77230+build04r01 [ 21s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 21s] + exit 0 [ 21s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.LqlZU1 [ 21s] + umask 022 [ 21s] + cd /home/abuild/rpmbuild/BUILD [ 21s] + cd eeze-1.7.0+svn.77230+build04r01 [ 21s] + LANG=C [ 21s] + export LANG [ 21s] + unset DISPLAY [ 21s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 21s] + export CFLAGS [ 21s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 21s] + export CXXFLAGS [ 21s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 21s] + export FFLAGS [ 21s] + LD_AS_NEEDED=1 [ 21s] + export LD_AS_NEEDED [ 21s] + export 'CFLAGS+= -fPIC -Wall' [ 21s] + CFLAGS+=' -fPIC -Wall' [ 21s] + export 'LDFLAGS+= -Wl,--hash-style=both -Wl,--as-needed' [ 21s] + LDFLAGS+=' -Wl,--hash-style=both -Wl,--as-needed' [ 21s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC -Wall' [ 21s] + export CFLAGS [ 21s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 21s] + export CXXFLAGS [ 21s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 21s] + export FFLAGS [ 21s] + ./autogen.sh --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 21s] Running aclocal... [ 22s] sh: svnversion: command not found [ 22s] Running autoheader... [ 23s] sh: svnversion: command not found [ 23s] Running autoconf... [ 23s] Running libtoolize... [ 24s] Running automake... [ 24s] configure.ac:66: installing `./compile' [ 24s] configure.ac:37: installing `./config.guess' [ 24s] configure.ac:37: installing `./config.sub' [ 24s] configure.ac:32: installing `./install-sh' [ 24s] configure.ac:32: installing `./missing' [ 24s] doc/Makefile.am:33: wildcard img/*.*: non-POSIX variable name [ 24s] doc/Makefile.am:33: (probably a GNU make extension) [ 24s] src/bin/Makefile.am: installing `./depcomp' [ 25s] cmp: config.cache-env: No such file or directory [ 25s] Cleaning configure cache... [ 25s] configure: creating cache config.cache [ 25s] checking for a BSD-compatible install... /usr/bin/install -c [ 26s] checking whether build environment is sane... yes [ 26s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 26s] checking for gawk... gawk [ 26s] checking whether make sets $(MAKE)... yes [ 26s] checking build system type... i686-pc-linux-gnu [ 26s] checking host system type... i686-pc-linux-gnu [ 26s] checking for style of include used by make... GNU [ 26s] checking for i686-pc-linux-gnu-gcc... no [ 26s] checking for gcc... gcc [ 26s] checking whether the C compiler works... yes [ 26s] checking for C compiler default output file name... a.out [ 26s] checking for suffix of executables... [ 26s] checking whether we are cross compiling... no [ 26s] checking for suffix of object files... o [ 26s] checking whether we are using the GNU C compiler... yes [ 26s] checking whether gcc accepts -g... yes [ 26s] checking for gcc option to accept ISO C89... none needed [ 26s] checking dependency style of gcc... gcc3 [ 26s] checking for a sed that does not truncate output... /bin/sed [ 26s] checking for grep that handles long lines and -e... /bin/grep [ 26s] checking for egrep... /bin/grep -E [ 26s] checking for fgrep... /bin/grep -F [ 26s] checking for ld used by gcc... /usr/bin/ld [ 26s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 26s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 26s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 26s] checking whether ln -s works... yes [ 26s] checking the maximum length of command line arguments... 1572864 [ 26s] checking whether the shell understands some XSI constructs... yes [ 26s] checking whether the shell understands "+="... yes [ 26s] checking for /usr/bin/ld option to reload object files... -r [ 26s] checking for i686-pc-linux-gnu-objdump... no [ 26s] checking for objdump... objdump [ 26s] checking how to recognize dependent libraries... pass_all [ 26s] checking for i686-pc-linux-gnu-ar... no [ 26s] checking for ar... ar [ 26s] checking for i686-pc-linux-gnu-strip... no [ 26s] checking for strip... strip [ 26s] checking for i686-pc-linux-gnu-ranlib... no [ 26s] checking for ranlib... ranlib [ 26s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 26s] checking how to run the C preprocessor... gcc -E [ 26s] checking for ANSI C header files... yes [ 26s] checking for sys/types.h... yes [ 26s] checking for sys/stat.h... yes [ 26s] checking for stdlib.h... yes [ 26s] checking for string.h... yes [ 26s] checking for memory.h... yes [ 26s] checking for strings.h... yes [ 26s] checking for inttypes.h... yes [ 26s] checking for stdint.h... yes [ 27s] checking for unistd.h... yes [ 27s] checking for dlfcn.h... yes [ 27s] checking for objdir... .libs [ 27s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 27s] checking for gcc option to produce PIC... -fPIC -DPIC [ 27s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 27s] checking if gcc static flag -static works... no [ 27s] checking if gcc supports -c -o file.o... yes [ 27s] checking if gcc supports -c -o file.o... (cached) yes [ 27s] checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes [ 27s] checking whether -lc should be explicitly linked in... no [ 27s] checking dynamic linker characteristics... GNU/Linux ld.so [ 27s] checking how to hardcode library paths into programs... immediate [ 27s] checking whether stripping libraries is possible... yes [ 27s] checking if libtool supports shared libraries... yes [ 27s] checking whether to build shared libraries... yes [ 27s] checking whether to build static libraries... yes [ 27s] checking for i686-pc-linux-gnu-gcc... gcc [ 27s] checking whether we are using the GNU C compiler... (cached) yes [ 27s] checking whether gcc accepts -g... (cached) yes [ 27s] checking for gcc option to accept ISO C89... (cached) none needed [ 27s] checking dependency style of gcc... (cached) gcc3 [ 27s] checking whether gcc and cc understand -c and -o together... yes [ 27s] checking for __attribute__... yes [ 27s] checking for i686-pc-linux-gnu-pkg-config... no [ 27s] checking for pkg-config... /usr/bin/pkg-config [ 27s] checking pkg-config is at least version 0.9.0... yes [ 27s] checking whether to build documentation... yes [ 27s] checking for doxygen... no [ 27s] WARNING: [ 27s] The doxygen program was not found in your execute path. [ 27s] You may have doxygen installed somewhere not covered by your path. [ 27s] [ 27s] If this is the case make sure you have the packages installed, AND [ 27s] that the doxygen program is in your execute path (see your [ 27s] shell manual page on setting the $PATH environment variable), OR [ 27s] alternatively, specify the program to use with --with-doxygen. [ 27s] configure: WARNING: no doxygen detected. Documentation will not be built [ 27s] checking for EEZE... yes [ 27s] checking netinet/in.h usability... yes [ 27s] checking netinet/in.h presence... yes [ 27s] checking for netinet/in.h... yes [ 27s] checking for struct ipv6_mreq... yes [ 27s] checking for ANSI C header files... (cached) yes [ 27s] checking whether the compiler supports -Wshadow... yes [ 27s] checking whether tests are built... no [ 27s] checking whether to build eeze_udev_test binary... yes [ 27s] checking whether to build eeze_sensor_test binary... yes [ 27s] checking whether to build eeze_mount binary... yes [ 27s] checking whether to build eeze_disk_ls binary... yes [ 27s] checking whether to build eeze_umount binary... yes [ 27s] checking whether to build eeze_scanner binary... yes [ 27s] configure: updating cache config.cache [ 27s] configure: creating ./config.status [ 27s] config.status: creating Makefile [ 27s] config.status: creating doc/eeze.dox [ 27s] config.status: creating doc/Makefile [ 27s] config.status: creating doc/Doxyfile [ 27s] config.status: creating src/Makefile [ 27s] config.status: creating src/lib/Makefile [ 27s] config.status: creating src/bin/Makefile [ 27s] config.status: creating src/tests/Makefile [ 27s] config.status: creating src/modules/Makefile [ 27s] config.status: creating eeze.pc [ 28s] config.status: creating eeze.spec [ 28s] config.status: creating config.h [ 28s] config.status: executing depfiles commands [ 28s] config.status: executing libtool commands [ 28s] [ 28s] [ 28s] [ 28s] ------------------------------------------------------------------------ [ 28s] eeze 1.7.99.0 [ 28s] ------------------------------------------------------------------------ [ 28s] [ 28s] Configuration Options Summary: [ 28s] Udev Tests.............: yes [ 28s] [ 28s] Tests..............: no (Coverage: no) [ 28s] [ 28s] Demos..................: [ 28s] eeze_mount...........: yes [ 28s] eeze_umount..........: yes [ 28s] eeze_disk_ls.........: yes [ 28s] [ 28s] Utilities..............: [ 28s] eeze_scanner.........: yes [ 28s] [ 28s] IPv6...................: yes [ 28s] [ 28s] Sensor.................: [ 28s] Tizen................: no [ 28s] [ 28s] Documentation..........: no [ 28s] [ 28s] Compilation............: make (or gmake) [ 28s] CPPFLAGS.............: [ 28s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC -Wall -Wshadow [ 28s] LDFLAGS..............: -Wl,--hash-style=both -Wl,--as-needed [ 28s] [ 28s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 28s] prefix...............: /usr [ 28s] [ 28s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC -Wall' [ 28s] + export CFLAGS [ 28s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 28s] + export CXXFLAGS [ 28s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 28s] + export FFLAGS [ 28s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 28s] checking for a BSD-compatible install... /usr/bin/install -c [ 29s] checking whether build environment is sane... yes [ 29s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 29s] checking for gawk... gawk [ 29s] checking whether make sets $(MAKE)... yes [ 29s] checking build system type... i686-pc-linux-gnu [ 29s] checking host system type... i686-pc-linux-gnu [ 29s] checking for style of include used by make... GNU [ 29s] checking for i686-pc-linux-gnu-gcc... no [ 29s] checking for gcc... gcc [ 29s] checking whether the C compiler works... yes [ 29s] checking for C compiler default output file name... a.out [ 29s] checking for suffix of executables... [ 29s] checking whether we are cross compiling... no [ 29s] checking for suffix of object files... o [ 29s] checking whether we are using the GNU C compiler... yes [ 29s] checking whether gcc accepts -g... yes [ 29s] checking for gcc option to accept ISO C89... none needed [ 29s] checking dependency style of gcc... gcc3 [ 29s] checking for a sed that does not truncate output... /bin/sed [ 29s] checking for grep that handles long lines and -e... /bin/grep [ 29s] checking for egrep... /bin/grep -E [ 29s] checking for fgrep... /bin/grep -F [ 29s] checking for ld used by gcc... /usr/bin/ld [ 29s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 29s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 29s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 29s] checking whether ln -s works... yes [ 29s] checking the maximum length of command line arguments... 1572864 [ 29s] checking whether the shell understands some XSI constructs... yes [ 29s] checking whether the shell understands "+="... yes [ 29s] checking for /usr/bin/ld option to reload object files... -r [ 29s] checking for i686-pc-linux-gnu-objdump... no [ 29s] checking for objdump... objdump [ 29s] checking how to recognize dependent libraries... pass_all [ 29s] checking for i686-pc-linux-gnu-ar... no [ 29s] checking for ar... ar [ 29s] checking for i686-pc-linux-gnu-strip... no [ 29s] checking for strip... strip [ 29s] checking for i686-pc-linux-gnu-ranlib... no [ 29s] checking for ranlib... ranlib [ 29s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 29s] checking how to run the C preprocessor... gcc -E [ 29s] checking for ANSI C header files... yes [ 29s] checking for sys/types.h... yes [ 29s] checking for sys/stat.h... yes [ 29s] checking for stdlib.h... yes [ 29s] checking for string.h... yes [ 29s] checking for memory.h... yes [ 29s] checking for strings.h... yes [ 30s] checking for inttypes.h... yes [ 30s] checking for stdint.h... yes [ 30s] checking for unistd.h... yes [ 30s] checking for dlfcn.h... yes [ 30s] checking for objdir... .libs [ 30s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 30s] checking for gcc option to produce PIC... -fPIC -DPIC [ 30s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 30s] checking if gcc static flag -static works... no [ 30s] checking if gcc supports -c -o file.o... yes [ 30s] checking if gcc supports -c -o file.o... (cached) yes [ 30s] checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes [ 30s] checking whether -lc should be explicitly linked in... no [ 30s] checking dynamic linker characteristics... GNU/Linux ld.so [ 30s] checking how to hardcode library paths into programs... immediate [ 30s] checking whether stripping libraries is possible... yes [ 30s] checking if libtool supports shared libraries... yes [ 30s] checking whether to build shared libraries... yes [ 30s] checking whether to build static libraries... yes [ 30s] checking for i686-pc-linux-gnu-gcc... gcc [ 30s] checking whether we are using the GNU C compiler... (cached) yes [ 30s] checking whether gcc accepts -g... (cached) yes [ 30s] checking for gcc option to accept ISO C89... (cached) none needed [ 30s] checking dependency style of gcc... (cached) gcc3 [ 30s] checking whether gcc and cc understand -c and -o together... yes [ 30s] checking for __attribute__... yes [ 30s] checking for i686-pc-linux-gnu-pkg-config... no [ 30s] checking for pkg-config... /usr/bin/pkg-config [ 30s] checking pkg-config is at least version 0.9.0... yes [ 30s] checking whether to build documentation... yes [ 30s] checking for doxygen... no [ 30s] WARNING: [ 30s] The doxygen program was not found in your execute path. [ 30s] You may have doxygen installed somewhere not covered by your path. [ 30s] [ 30s] If this is the case make sure you have the packages installed, AND [ 30s] that the doxygen program is in your execute path (see your [ 30s] shell manual page on setting the $PATH environment variable), OR [ 30s] alternatively, specify the program to use with --with-doxygen. [ 30s] configure: WARNING: no doxygen detected. Documentation will not be built [ 30s] checking for EEZE... yes [ 30s] checking netinet/in.h usability... yes [ 30s] checking netinet/in.h presence... yes [ 30s] checking for netinet/in.h... yes [ 30s] checking for struct ipv6_mreq... yes [ 30s] checking for ANSI C header files... (cached) yes [ 30s] checking whether the compiler supports -Wshadow... yes [ 30s] checking whether tests are built... no [ 30s] checking whether to build eeze_udev_test binary... yes [ 30s] checking whether to build eeze_sensor_test binary... yes [ 30s] checking whether to build eeze_mount binary... yes [ 30s] checking whether to build eeze_disk_ls binary... yes [ 30s] checking whether to build eeze_umount binary... yes [ 30s] checking whether to build eeze_scanner binary... yes [ 30s] configure: creating ./config.status [ 30s] config.status: creating Makefile [ 30s] config.status: creating doc/eeze.dox [ 31s] config.status: creating doc/Makefile [ 31s] config.status: creating doc/Doxyfile [ 31s] config.status: creating src/Makefile [ 31s] config.status: creating src/lib/Makefile [ 31s] config.status: creating src/bin/Makefile [ 31s] config.status: creating src/tests/Makefile [ 31s] config.status: creating src/modules/Makefile [ 31s] config.status: creating eeze.pc [ 31s] config.status: creating eeze.spec [ 31s] config.status: creating config.h [ 31s] config.status: config.h is unchanged [ 31s] config.status: executing depfiles commands [ 31s] config.status: executing libtool commands [ 31s] [ 31s] [ 31s] [ 31s] ------------------------------------------------------------------------ [ 31s] eeze 1.7.99.0 [ 31s] ------------------------------------------------------------------------ [ 31s] [ 31s] Configuration Options Summary: [ 31s] Udev Tests.............: yes [ 31s] [ 31s] Tests..............: no (Coverage: no) [ 31s] [ 31s] Demos..................: [ 31s] eeze_mount...........: yes [ 31s] eeze_umount..........: yes [ 31s] eeze_disk_ls.........: yes [ 31s] [ 31s] Utilities..............: [ 31s] eeze_scanner.........: yes [ 31s] [ 31s] IPv6...................: yes [ 31s] [ 31s] Sensor.................: [ 31s] Tizen................: no [ 31s] [ 31s] Documentation..........: no [ 31s] [ 31s] Compilation............: make (or gmake) [ 31s] CPPFLAGS.............: [ 31s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC -Wall -Wshadow [ 31s] LDFLAGS..............: -Wl,--hash-style=both -Wl,--as-needed [ 31s] [ 31s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 31s] prefix...............: /usr [ 31s] [ 31s] + make -j4 [ 31s] make all-recursive [ 31s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 31s] Making all in src [ 31s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 31s] Making all in lib [ 31s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/lib' [ 31s] CC eeze_main.lo [ 31s] CC eeze_net.lo [ 31s] CC eeze_udev_find.lo [ 31s] CC eeze_udev_private.lo [ 31s] CC eeze_udev_syspath.lo [ 31s] CC eeze_udev_walk.lo [ 31s] CC eeze_udev_watch.lo [ 31s] CC eeze_sensor.lo [ 31s] CCLD libeeze.la [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/lib' [ 32s] Making all in bin [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 32s] CC eeze_sensor_test-eeze_sensor_test.o [ 32s] CC eeze_udev_test-eeze_udev_test.o [ 32s] CCLD eeze_sensor_test [ 32s] CCLD eeze_udev_test [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 32s] Making all in tests [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/tests' [ 32s] make[3]: Nothing to be done for `all'. [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/tests' [ 32s] Making all in modules [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/modules' [ 32s] CC eeze_sensor_fake_la-eeze_sensor_fake.lo [ 32s] CCLD eeze-sensor-fake.la [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/modules' [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 32s] make[3]: Nothing to be done for `all-am'. [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 32s] Making all in doc [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/doc' [ 32s] make[2]: Nothing to be done for `all'. [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/doc' [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 32s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 32s] + exit 0 [ 32s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.4InJMO [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd eeze-1.7.0+svn.77230+build04r01 [ 32s] + LANG=C [ 32s] + export LANG [ 32s] + unset DISPLAY [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386 [ 32s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386 [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386 [ 32s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386 install [ 32s] Making install in src [ 32s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 32s] Making install in lib [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/lib' [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/lib' [ 32s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib" [ 32s] /bin/sh ../../libtool --mode=install /usr/bin/install -c libeeze.la '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib' [ 32s] libtool: install: /usr/bin/install -c .libs/libeeze.so.1.7.99 /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/libeeze.so.1.7.99 [ 32s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib && { ln -s -f libeeze.so.1.7.99 libeeze.so.1 || { rm -f libeeze.so.1 && ln -s libeeze.so.1.7.99 libeeze.so.1; }; }) [ 32s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib && { ln -s -f libeeze.so.1.7.99 libeeze.so || { rm -f libeeze.so && ln -s libeeze.so.1.7.99 libeeze.so; }; }) [ 32s] libtool: install: /usr/bin/install -c .libs/libeeze.lai /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/libeeze.la [ 32s] libtool: install: /usr/bin/install -c .libs/libeeze.a /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/libeeze.a [ 32s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/libeeze.a [ 32s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/libeeze.a [ 32s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 32s] test -z "/usr/include/eeze-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/include/eeze-1" [ 32s] /usr/bin/install -c -m 644 Eeze.h Eeze_Net.h Eeze_Sensor.h '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/include/eeze-1' [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/lib' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/lib' [ 32s] Making install in bin [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 32s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/bin" [ 32s] /bin/sh ../../libtool --mode=install /usr/bin/install -c eeze_sensor_test '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/bin' [ 32s] libtool: install: warning: `../../src/lib/libeeze.la' has not been installed in `/usr/lib' [ 32s] libtool: install: /usr/bin/install -c .libs/eeze_sensor_test /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/bin/eeze_sensor_test [ 32s] test -z "" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386" [ 32s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/bin" [ 32s] /usr/bin/make install-data-hook [ 32s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 32s] make[4]: Nothing to be done for `install-data-hook'. [ 32s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 32s] Making install in tests [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/tests' [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/tests' [ 32s] make[3]: Nothing to be done for `install-exec-am'. [ 32s] make[3]: Nothing to be done for `install-data-am'. [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/tests' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/tests' [ 32s] Making install in modules [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/modules' [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/modules' [ 32s] make[3]: Nothing to be done for `install-exec-am'. [ 32s] test -z "/usr/lib/eeze-sensor" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/eeze-sensor" [ 32s] /bin/sh ../../libtool --mode=install /usr/bin/install -c eeze-sensor-fake.la '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/eeze-sensor' [ 32s] libtool: install: /usr/bin/install -c .libs/eeze-sensor-fake.so /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/eeze-sensor/eeze-sensor-fake.so [ 32s] libtool: install: /usr/bin/install -c .libs/eeze-sensor-fake.lai /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/eeze-sensor/eeze-sensor-fake.la [ 32s] libtool: install: warning: remember to run `libtool --finish /usr/lib/eeze-sensor' [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/modules' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/modules' [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 32s] make[3]: Nothing to be done for `install-exec-am'. [ 32s] make[3]: Nothing to be done for `install-data-am'. [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 32s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 32s] Making install in doc [ 32s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/doc' [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/doc' [ 32s] make[2]: Nothing to be done for `install-exec-am'. [ 32s] make[2]: Nothing to be done for `install-data-am'. [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/doc' [ 32s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/doc' [ 32s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 32s] make[2]: Nothing to be done for `install-exec-am'. [ 32s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/pkgconfig" [ 32s] /usr/bin/install -c -m 644 eeze.pc '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/pkgconfig' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 32s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 32s] + rm -f /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/share/info/dir [ 32s] + xargs rm -f -- [ 32s] + find /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386 -regex '.*\.la$' [ 32s] + find /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386 -regex '.*\.a$' [ 32s] + xargs rm -f -- [ 32s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01 [ 32s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/bin/eeze_sensor_test [ 32s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/eeze-sensor/eeze-sensor-fake.so [ 32s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/lib/libeeze.so.1.7.99 [ 32s] symlinked /usr/lib/debug/usr/lib/libeeze.so.1.7.99.debug to /usr/lib/debug/usr/lib/libeeze.so.debug [ 32s] symlinked /usr/lib/debug/usr/lib/libeeze.so.1.7.99.debug to /usr/lib/debug/usr/lib/libeeze.so.1.debug [ 32s] 190 blocks [ 32s] + /usr/lib/rpm/check-buildroot [ 32s] + /usr/lib/rpm//brp-compress [ 32s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 32s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 32s] + /usr/lib/rpm/brp-python-bytecompile [ 32s] + /usr/lib/rpm/brp-python-hardlink [ 32s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386 [ 32s] Processing files: eeze-1.7.0+svn.77230+build04r01-1.1.i586 [ 32s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 32s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 32s] [ 32s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.hmHDhD [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd eeze-1.7.0+svn.77230+build04r01 [ 32s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/share/doc/eeze-1.7.0+svn.77230+build04r01 [ 32s] + export DOCDIR [ 32s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/share/doc/eeze-1.7.0+svn.77230+build04r01 [ 32s] + cp -pr AUTHORS COPYING README /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386/usr/share/doc/eeze-1.7.0+svn.77230+build04r01 [ 32s] + exit 0 [ 32s] Provides: libeeze.so.1 [ 32s] Requires(interp): /bin/sh /bin/sh [ 32s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 32s] Requires(post): /bin/sh /sbin/ldconfig [ 32s] Requires(postun): /bin/sh /sbin/ldconfig [ 32s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libecore.so.1 libeeze.so.1 libeina.so.1 libpthread.so.0 libpthread.so.0(GLIBC_2.0) librt.so.1 libudev.so.0 [ 32s] Processing files: eeze-devel-1.7.0+svn.77230+build04r01-1.1.i586 [ 32s] Provides: eeze-sensor-fake.so pkgconfig(eeze) = 1.7.99.0 [ 32s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 32s] Requires: /usr/bin/pkg-config libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libeeze.so.1 pkgconfig(ecore) >= 1.6.99 pkgconfig(eina) >= 1.6.99 pkgconfig(libudev) [ 32s] Processing files: eeze-debuginfo-1.7.0+svn.77230+build04r01-1.1.i586 [ 32s] Processing files: eeze-debugsource-1.7.0+svn.77230+build04r01-1.1.i586 [ 32s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386 [ 32s] Wrote: /home/abuild/rpmbuild/SRPMS/eeze-1.7.0+svn.77230+build04r01-1.1.src.rpm [ 32s] Wrote: /home/abuild/rpmbuild/RPMS/i586/eeze-1.7.0+svn.77230+build04r01-1.1.i586.rpm [ 33s] Wrote: /home/abuild/rpmbuild/RPMS/i586/eeze-devel-1.7.0+svn.77230+build04r01-1.1.i586.rpm [ 33s] Wrote: /home/abuild/rpmbuild/RPMS/i586/eeze-debuginfo-1.7.0+svn.77230+build04r01-1.1.i586.rpm [ 33s] Wrote: /home/abuild/rpmbuild/RPMS/i586/eeze-debugsource-1.7.0+svn.77230+build04r01-1.1.i586.rpm [ 33s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.3xz8ny [ 33s] + umask 022 [ 33s] + cd /home/abuild/rpmbuild/BUILD [ 33s] + cd eeze-1.7.0+svn.77230+build04r01 [ 33s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.i386 [ 33s] + exit 0 [ 33s] ... checking for files with abuild user/group [ 33s] ... creating baselibs [ 33s] ... saving built packages [ 33s] /home/abuild/rpmbuild/RPMS/i586/eeze-1.7.0+svn.77230+build04r01-1.1.i586.rpm [ 33s] /home/abuild/rpmbuild/RPMS/i586/eeze-debuginfo-1.7.0+svn.77230+build04r01-1.1.i586.rpm [ 33s] /home/abuild/rpmbuild/RPMS/i586/eeze-debugsource-1.7.0+svn.77230+build04r01-1.1.i586.rpm [ 33s] /home/abuild/rpmbuild/RPMS/i586/eeze-devel-1.7.0+svn.77230+build04r01-1.1.i586.rpm [ 33s] /home/abuild/rpmbuild/SRPMS/eeze-1.7.0+svn.77230+build04r01-1.1.src.rpm [ 33s] [ 33s] w06 finished "build eeze.spec" at Wed Jul 17 06:09:23 UTC 2013. [ 33s] [ 36s] [ 30.535215] SysRq : Power Off [ 37s] [ 32.039099] Power down. [ 38s] build: extracting built packages... [ 38s] eeze-1.7.0+svn.77230+build04r01-1.1.i586.rpm [ 38s] eeze-debuginfo-1.7.0+svn.77230+build04r01-1.1.i586.rpm [ 38s] eeze-debugsource-1.7.0+svn.77230+build04r01-1.1.i586.rpm [ 38s] eeze-devel-1.7.0+svn.77230+build04r01-1.1.i586.rpm [ 38s] eeze-1.7.0+svn.77230+build04r01-1.1.src.rpm