[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w05 started "build neard.spec" at Wed Jul 17 06:02:17 UTC 2013. [ 0s] [ 0s] Building neard-tizen for project 'Tizen:2.2:Main' repository 'emulator' arch 'i586' srcmd5 'cea47062cab387b58e09cee5f87170e7' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/neard.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/neard.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/neard.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/30] preinstalling libgcc... [ 0s] [2/30] preinstalling setup... [ 0s] [3/30] preinstalling filesystem... [ 0s] [4/30] preinstalling eglibc... [ 0s] [5/30] preinstalling bzip2-libs... [ 0s] [6/30] preinstalling elfutils-libelf... [ 0s] [7/30] preinstalling libattr... [ 0s] [8/30] preinstalling liblua... [ 0s] [9/30] preinstalling ncurses-libs... [ 0s] [10/30] preinstalling nspr... [ 1s] [11/30] preinstalling nss-softokn-freebl... [ 1s] [12/30] preinstalling popt... [ 1s] [13/30] preinstalling readline... [ 1s] [14/30] preinstalling sed... [ 1s] [15/30] preinstalling sqlite... [ 1s] [16/30] preinstalling xz-libs... [ 1s] [17/30] preinstalling zlib... [ 1s] [18/30] preinstalling bash... [ 1s] [19/30] preinstalling diffutils... [ 1s] [20/30] preinstalling libstdc++... [ 1s] [21/30] preinstalling eglibc-common... [ 1s] [22/30] preinstalling libacl... [ 1s] [23/30] preinstalling libcap... [ 1s] [24/30] preinstalling libfile... [ 1s] [25/30] preinstalling bzip2... [ 1s] [26/30] preinstalling nss... [ 1s] [27/30] preinstalling tar... [ 1s] [28/30] preinstalling coreutils... [ 1s] [29/30] preinstalling rpm-libs... [ 1s] [30/30] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 2s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: dbus-libs -> dbus [ 2s] breaking dependency dbus -> dbus-libs [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: libudev -> udev -> systemd [ 2s] breaking dependency udev -> systemd [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm-libs -> rpm [ 2s] breaking dependency rpm -> rpm-libs [ 2s] done [ 2s] booting kvm ... [ 2s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_8/root,if=virtio,cache=unsafe -drive file=/srv/build/root_8/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_8/swap,if=virtio,cache=unsafe -smp 4 [ 3s]  [ 3s] Google, Inc. [ 3s] Serial Graphics Adapter 09/05/12 [ 3s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 3s] 4 0 [ 3s]  SeaBIOS (version 1.6.3-20120905_140109) [ 3s] [ 3s] Booting from ROM... [ 6s] doing fast boot [ 6s] Creating device nodes with udev [ 6s] udevd[209]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 6s] [ 7s] Waiting for device /dev/vda to appear: ok [ 7s] fsck from util-linux 2.20.1 [ 7s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 7s] /dev/vda: clean, 6090/2097152 files, 201343/8388608 blocks [ 7s] fsck succeeded. Mounting root device read-write. [ 7s] Mounting root /dev/vda [ 7s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 7s] replacing /etc/mtab with symlink to /proc/self/mounts [ 7s] sh: /sbin/modprobe: No such file or directory [ 7s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 8: interpreter '/usr/bin/qemu-arm-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 7s] 2nd stage started in virtual machine [ 7s] machine type: x86_64 [ 7s] switching personality to 8... [ 7s] 2nd stage started in virtual machine [ 7s] machine type: i686 [ 7s] [ 1.690318] EXT4-fs (vda): Cannot change data mode on remount [ 7s] mount: / not mounted or bad option [ 7s] swapon on /dev/vdb [ 7s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 7s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 7s] *********************************** [ 7s] VM_TYPE: kvm script: /.build/build [ 7s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 7s] logging output to //.build.log... [ 7s] processing specfile /.build-srcdir/neard.spec ... [ 7s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/neard.spec build rpmlint-Factory ... [ 7s] initializing rpm db... [ 7s] [1/124] installing cloog-0.15.9-1.1 [ 7s] [2/124] installing kernel-headers-3.0.15-1.1 [ 7s] [3/124] installing libX11-common-1.5.0-3.1 [ 7s] [4/124] installing tizen-release-2.2.0-1.1 [ 7s] [5/124] installing tzdata-2011h-1.1 [ 8s] [6/124] installing libgcc-4.5.3-1.2 [ 8s] [7/124] installing setup-0.1-1.1 [ 8s] [8/124] installing filesystem-0.1-1.1 [ 8s] warning: group lock does not exist - using root [ 8s] warning: group mail does not exist - using root [ 8s] [9/124] installing eglibc-2.13-1.4 [ 8s] [10/124] installing libstdc++-4.5.3-1.2 [ 8s] [11/124] installing bzip2-libs-1.0.5-4.1 [ 8s] [12/124] installing cpio-2.8-3.1 [ 8s] [13/124] installing e2fsprogs-libs-1.41.9-2.4 [ 8s] [14/124] installing elfutils-libelf-0.152-1.8 [ 8s] [15/124] installing expat-2.0.1-8.1 [ 9s] [16/124] installing findutils-4.2.31-1.1 [ 9s] [17/124] installing gdbm-1.8.3-1.1 [ 9s] [18/124] installing kmod-5-4.1 [ 9s] [19/124] installing libXau-1.0.7-1.1 [ 9s] [20/124] installing libattr-2.4.44-7.2 [ 9s] [21/124] installing libffi-3.0.9-100.1 [ 9s] [22/124] installing libidn-1.15-6.1 [ 9s] [23/124] installing liblua-5.1.4-6.1 [ 9s] [24/124] installing libstdc++-devel-4.5.3-1.2 [ 9s] [25/124] installing libuuid-2.20.2-6.1 [ 9s] [26/124] installing lzo-2.03-1.1 [ 9s] [27/124] installing m4-1.4.14-1.1 [ 9s] [28/124] installing make-3.81-1.1 [ 9s] [29/124] installing net-tools-1.60-87.2 [ 9s] [30/124] installing nspr-4.8.7-1.3 [ 9s] [31/124] installing nss-softokn-freebl-3.12.9-3.6 [ 9s] [32/124] installing patch-2.6.1.169-1.1 [ 9s] [33/124] installing pkgconfig-0.25-2.1 [ 9s] [34/124] installing popt-1.16-3.1 [ 9s] [35/124] installing readline-5.2-13.1 [ 9s] [36/124] installing sed-4.1.5-2.1 [ 10s] [37/124] installing smack-1.0slp2+s11-1.1 [ 10s] [38/124] installing sqlite-3.7.13-1.1 [ 10s] [39/124] installing xz-libs-5.0.3-1.1 [ 10s] [40/124] installing zlib-1.2.5-2.6 [ 10s] [41/124] installing bash-4.1-3.1 [ 10s] [42/124] installing diffutils-3.0-3.1 [ 10s] [43/124] installing libgomp-4.5.3-1.2 [ 10s] [44/124] installing libnl2-2.0-2.1 [ 10s] [45/124] installing gmp-5.0.1-1.1 [ 10s] [46/124] installing libpcre-7.7-3.1 [ 10s] [47/124] installing ncurses-libs-5.7-4.1 [ 10s] [48/124] installing build-compare-2009.10.14-26.2 [ 10s] [49/124] installing emulator-macros-1-1.1 [ 10s] [50/124] installing c-ares-1.7.4-2.1 [ 10s] [51/124] installing eglibc-headers-2.13-1.4 [ 10s] [52/124] installing grep-2.5.1a-62.1 [ 10s] [53/124] installing libacl-2.2.49-2.1 [ 10s] [54/124] installing libcap-2.21-1.1 [ 10s] [55/124] installing libfile-5.04-1.1 [ 10s] [56/124] installing libnl2-devel-2.0-2.1 [ 10s] [57/124] installing libxcb-1.8.1-1.1 [ 10s] [58/124] installing lzo-minilzo-2.03-1.1 [ 10s] [59/124] installing mpfr-3.0.0-1.1 [ 10s] [60/124] installing ncurses-5.7-4.1 [ 11s] [61/124] installing unzip-6.0-9.1 [ 11s] [62/124] installing zlib-devel-1.2.5-2.6 [ 11s] [63/124] installing bzip2-1.0.5-4.1 [ 11s] [64/124] installing glib2-2.32.3-5.1 [ 11s] [65/124] installing libblkid-2.20.2-6.1 [ 11s] [66/124] installing xz-5.0.3-1.1 [ 11s] [67/124] installing binutils-2.22-1.2 [ 11s] [68/124] installing ppl-0.10.2-10.1 [ 11s] [69/124] installing elfutils-libs-0.152-1.8 [ 11s] [70/124] installing nss-3.12.9-3.6 [ 11s] [71/124] installing perl-5.12.1-61.3 [ 12s] [72/124] installing ncurses-base-5.7-4.1 [ 12s] [73/124] installing perl-HTML-Tagset-3.20-8.1 [ 12s] [74/124] installing perl-IO-Compress-Base-2.008-61.3 [ 12s] [75/124] installing perl-Module-Pluggable-3.60-61.3 [ 12s] [76/124] installing perl-Pod-Escapes-1.04-61.3 [ 12s] [77/124] installing perl-TimeDate-1.20-1.1 [ 12s] [78/124] installing eglibc-devel-2.13-1.4 [ 12s] [79/124] installing perl-Compress-Raw-Zlib-2.008-61.3 [ 12s] [80/124] installing perl-libs-5.12.1-61.3 [ 12s] [81/124] installing tar-1.17-4.1 [ 12s] [82/124] installing coreutils-6.9-9.1 [ 12s] [83/124] installing file-5.04-1.1 [ 12s] [84/124] installing libmount-2.20.2-6.1 [ 12s] [85/124] installing lzo-devel-2.03-1.1 [ 13s] [86/124] installing mpc-0.9-1.1 [ 13s] [87/124] installing openssl-1.0.1c-1.8 [ 13s] [88/124] installing perl-devel-5.12.1-61.3 [ 13s] [89/124] installing xz-lzma-compat-5.0.3-1.1 [ 13s] [90/124] installing cloog-ppl-0.15.9-1.1 [ 13s] [91/124] installing libX11-1.5.0-3.1 [ 13s] [92/124] installing nss-sysinit-3.12.9-3.6 [ 13s] [93/124] installing elfutils-0.152-1.8 [ 13s] [94/124] installing eglibc-common-2.13-1.4 [ 19s] [95/124] installing udev-182-6.1 [ 19s] [96/124] installing perl-ExtUtils-ParseXS-2.18-61.3 [ 19s] [97/124] installing perl-Pod-Simple-3.07-61.3 [ 19s] [98/124] installing perl-Test-Simple-0.80-61.3 [ 19s] [99/124] installing gawk-3.1.5-1.1 [ 19s] [100/124] installing gzip-1.3.14-2.1 [ 19s] [101/124] installing libudev-182-6.1 [ 20s] [102/124] installing pam-1.1.5-2.1 [ 20s] [103/124] installing perl-IO-Compress-Zlib-2.008-61.3 [ 20s] [104/124] installing perl-Test-Harness-3.12-61.3 [ 20s] [105/124] installing build-2011.01.10a-1.1 [ 20s] [106/124] installing libcurl-7.28.1-2.1 [ 20s] [107/124] installing dbus-1.6.4-6.1 [ 20s] warning: group dbus does not exist - using root [ 20s] [108/124] installing util-linux-2.20.2-6.1 [ 20s] warning: group tty does not exist - using root [ 20s] /bin/chown: `root:root': invalid user [ 20s] [109/124] installing cpp-4.5.3-1.2 [ 20s] [110/124] installing glib2-devel-2.32.3-5.1 [ 20s] [111/124] installing dbus-libs-1.6.4-6.1 [ 20s] [112/124] installing perl-ExtUtils-MakeMaker-6.36-61.3 [ 20s] [113/124] installing curl-7.28.1-2.1 [ 20s] [114/124] installing gcc-4.5.3-1.2 [ 21s] [115/124] installing dbus-devel-1.6.4-6.1 [ 21s] [116/124] installing perl-CPAN-1.9205-61.3 [ 21s] [117/124] installing autoconf-2.68-1.1 [ 21s] [118/124] installing systemd-43-2.1 [ 21s] [119/124] installing gcc-c++-4.5.3-1.2 [ 21s] [120/124] installing rpm-4.9.1-4.1 [ 21s] [121/124] installing automake-1.11.1-3.1 [ 21s] [122/124] installing rpm-libs-4.9.1-4.1 [ 21s] [123/124] installing libtool-2.2.6b-1.1 [ 21s] [124/124] installing rpm-build-4.9.1-4.1 [ 21s] now finalizing build dir... [ 21s] /.build/build: line 2269: //etc/passwd: No such file or directory [ 22s] ----------------------------------------------------------------- [ 22s] I have the following modifications for neard.spec: [ 22s] 4c4 [ 22s] < Release: 1 [ 22s] --- [ 22s] > Release: 1.1 [ 22s] 101a102 [ 22s] > %changelog [ 22s] ----------------------------------------------------------------- [ 22s] ----- building neard.spec (user abuild) [ 22s] ----------------------------------------------------------------- [ 22s] ----------------------------------------------------------------- [ 22s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.2:Main/emulator/cea47062cab387b58e09cee5f87170e7-neard-tizen' /home/abuild/rpmbuild/SOURCES/neard.spec [ 22s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.W1URAA [ 22s] + umask 022 [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + LANG=C [ 22s] + export LANG [ 22s] + unset DISPLAY [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + rm -rf neard-tizen-0.10 [ 22s] + /usr/bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/neard-0.10.tar.bz2 [ 22s] + /bin/tar -xf - [ 22s] + STATUS=0 [ 22s] + '[' 0 -ne 0 ']' [ 22s] + cd neard-tizen-0.10 [ 22s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 22s] + exit 0 [ 22s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.0IE99K [ 22s] + umask 022 [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + cd neard-tizen-0.10 [ 22s] + LANG=C [ 22s] + export LANG [ 22s] + unset DISPLAY [ 22s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 22s] + export CFLAGS [ 22s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 22s] + export CXXFLAGS [ 22s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 22s] + export FFLAGS [ 22s] + LD_AS_NEEDED=1 [ 22s] + export LD_AS_NEEDED [ 22s] + ./bootstrap [ 24s] configure.ac:33: installing `./config.guess' [ 24s] configure.ac:33: installing `./config.sub' [ 24s] configure.ac:4: installing `./install-sh' [ 24s] configure.ac:4: installing `./missing' [ 24s] Makefile.am: installing `./depcomp' [ 24s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 24s] + export CFLAGS [ 24s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 24s] + export CXXFLAGS [ 24s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 24s] + export FFLAGS [ 24s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-debug --prefix=/usr --sysconfdir=/etc --enable-nfctype1=builtin --enable-nfctype2=builtin --enable-nfctype3=builtin --enable-nfctype4=builtin --disable-p2p --enable-test [ 24s] checking for a BSD-compatible install... /usr/bin/install -c [ 25s] checking whether build environment is sane... yes [ 25s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 25s] checking for gawk... gawk [ 25s] checking whether make sets $(MAKE)... yes [ 25s] checking whether to enable maintainer-specific portions of Makefiles... no [ 25s] checking for i686-pc-linux-gnu-pkg-config... no [ 25s] checking for pkg-config... /usr/bin/pkg-config [ 25s] checking pkg-config is at least version 0.9.0... yes [ 25s] checking for i686-pc-linux-gnu-gcc... no [ 25s] checking for gcc... gcc [ 26s] checking whether the C compiler works... yes [ 26s] checking for C compiler default output file name... a.out [ 26s] checking for suffix of executables... [ 26s] checking whether we are cross compiling... no [ 26s] checking for suffix of object files... o [ 26s] checking whether we are using the GNU C compiler... yes [ 26s] checking whether gcc accepts -g... yes [ 26s] checking for gcc option to accept ISO C89... none needed [ 26s] checking for style of include used by make... GNU [ 26s] checking dependency style of gcc... gcc3 [ 26s] checking whether gcc accepts -fPIE... yes [ 26s] checking build system type... i686-pc-linux-gnu [ 26s] checking host system type... i686-pc-linux-gnu [ 26s] checking for a sed that does not truncate output... /bin/sed [ 26s] checking for grep that handles long lines and -e... /bin/grep [ 26s] checking for egrep... /bin/grep -E [ 26s] checking for fgrep... /bin/grep -F [ 26s] checking for ld used by gcc... /usr/bin/ld [ 26s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 26s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 26s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 26s] checking whether ln -s works... yes [ 26s] checking the maximum length of command line arguments... 1572864 [ 26s] checking whether the shell understands some XSI constructs... yes [ 26s] checking whether the shell understands "+="... yes [ 26s] checking for /usr/bin/ld option to reload object files... -r [ 26s] checking for i686-pc-linux-gnu-objdump... no [ 26s] checking for objdump... objdump [ 26s] checking how to recognize dependent libraries... pass_all [ 26s] checking for i686-pc-linux-gnu-ar... no [ 26s] checking for ar... ar [ 26s] checking for i686-pc-linux-gnu-strip... no [ 26s] checking for strip... strip [ 26s] checking for i686-pc-linux-gnu-ranlib... no [ 26s] checking for ranlib... ranlib [ 26s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 26s] checking how to run the C preprocessor... gcc -E [ 26s] checking for ANSI C header files... yes [ 26s] checking for sys/types.h... yes [ 26s] checking for sys/stat.h... yes [ 26s] checking for stdlib.h... yes [ 26s] checking for string.h... yes [ 26s] checking for memory.h... yes [ 26s] checking for strings.h... yes [ 26s] checking for inttypes.h... yes [ 26s] checking for stdint.h... yes [ 26s] checking for unistd.h... yes [ 26s] checking for dlfcn.h... yes [ 26s] checking for objdir... .libs [ 26s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 26s] checking for gcc option to produce PIC... -fPIC -DPIC [ 26s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 26s] checking if gcc static flag -static works... no [ 26s] checking if gcc supports -c -o file.o... yes [ 26s] checking if gcc supports -c -o file.o... (cached) yes [ 26s] checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes [ 26s] checking whether -lc should be explicitly linked in... no [ 26s] checking dynamic linker characteristics... GNU/Linux ld.so [ 26s] checking how to hardcode library paths into programs... immediate [ 26s] checking whether stripping libraries is possible... yes [ 26s] checking if libtool supports shared libraries... yes [ 26s] checking whether to build shared libraries... yes [ 26s] checking whether to build static libraries... no [ 26s] checking for dlopen in -ldl... yes [ 26s] checking for GLIB... yes [ 26s] checking for DBUS... yes [ 26s] checking for LIBNL3... no [ 26s] checking for LIBNL2... yes [ 26s] configure: creating ./config.status [ 27s] config.status: creating Makefile [ 27s] config.status: creating include/version.h [ 27s] config.status: creating neard.pc [ 27s] config.status: creating config.h [ 27s] config.status: executing depfiles commands [ 27s] config.status: executing libtool commands [ 27s] + make -j4 [ 27s] make --no-print-directory all-am [ 27s] GEN include/near/types.h [ 27s] GEN include/near/plugin.h [ 27s] GEN include/near/tag.h [ 27s] GEN include/near/adapter.h [ 27s] GEN include/near/log.h [ 27s] GEN include/near/ndef.h [ 27s] GEN include/near/tlv.h [ 27s] GEN include/near/setting.h [ 27s] GEN include/near/device.h [ 27s] GEN include/near/nfc_copy.h [ 27s] GEN include/near/snep.h [ 27s] GEN include/near/version.h [ 27s] GEN include/near/dbus.h [ 27s] GEN src/builtin.h [ 27s] CC gdbus/mainloop.o [ 27s] CC gdbus/watch.o [ 27s] CC gdbus/object.o [ 27s] CC gdbus/client.o [ 27s] CC gdbus/polkit.o [ 27s] CC plugins/nfctype1.o [ 27s] CC plugins/nfctype2.o [ 27s] CC plugins/mifare.o [ 27s] CC plugins/nfctype3.o [ 27s] CC plugins/nfctype4.o [ 27s] CC src/main.o [ 27s] CC src/error.o [ 27s] CC src/log.o [ 27s] CC src/dbus.o [ 27s] CC src/manager.o [ 28s] CC src/adapter.o [ 28s] CC src/device.o [ 28s] CC src/tag.o [ 28s] CC src/plugin.o [ 28s] CC src/netlink.o [ 28s] CC src/ndef.o [ 28s] CC src/tlv.o [ 28s] CC src/bluetooth.o [ 28s] CC src/agent.o [ 28s] CC src/snep.o [ 28s] CCLD src/neard [ 28s] + exit 0 [ 28s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.WdxS8k [ 28s] + umask 022 [ 28s] + cd /home/abuild/rpmbuild/BUILD [ 28s] + cd neard-tizen-0.10 [ 28s] + LANG=C [ 28s] + export LANG [ 28s] + unset DISPLAY [ 28s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386 [ 28s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386 [ 28s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386 install [ 29s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/bin" [ 29s] test -z "/usr/libexec/nfc" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/libexec/nfc" [ 29s] /bin/sh ./libtool --mode=install /usr/bin/install -c src/neard '/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/libexec/nfc' [ 29s] libtool: install: /usr/bin/install -c src/neard /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/libexec/nfc/neard [ 29s] test -z "/etc/dbus-1/system.d/" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/etc/dbus-1/system.d/" [ 29s] /usr/bin/install -c -m 644 src/org.neard.conf '/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/etc/dbus-1/system.d/' [ 29s] test -z "/usr/include/near" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/include/near" [ 29s] /usr/bin/install -c -m 644 include/types.h include/log.h include/plugin.h include/tag.h include/adapter.h include/ndef.h include/tlv.h include/setting.h include/device.h include/nfc_copy.h include/snep.h '/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/include/near' [ 29s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/share/man/man1" [ 29s] /usr/bin/install -c -m 644 doc/nfctool.1 '/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/share/man/man1' [ 29s] test -z "/usr/share/man/man5" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/share/man/man5" [ 29s] /usr/bin/install -c -m 644 doc/neard.conf.5 '/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/share/man/man5' [ 29s] test -z "/usr/share/man/man8" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/share/man/man8" [ 29s] /usr/bin/install -c -m 644 doc/neard.8 '/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/share/man/man8' [ 29s] test -z "/usr/include/near" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/include/near" [ 29s] /usr/bin/install -c -m 644 include/version.h '/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/include/near' [ 29s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/lib/pkgconfig" [ 29s] /usr/bin/install -c -m 644 neard.pc '/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/lib/pkgconfig' [ 29s] test -z "/usr/lib/near/plugins" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/lib/near/plugins" [ 29s] test -z "/usr/lib/neard/test" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/lib/neard/test" [ 29s] /usr/bin/install -c test/disable-adapter test/enable-adapter test/list-adapters test/dump-device test/dump-tag test/dump-record test/monitor-near test/start-poll test/stop-poll test/write-tag test/push-device test/bt-handover test/handover-agent '/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/lib/neard/test' [ 29s] + rm -f /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/share/info/dir [ 29s] + find /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386 -regex '.*\.la$' [ 29s] + xargs rm -f -- [ 29s] + xargs rm -f -- [ 29s] + find /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386 -regex '.*\.a$' [ 29s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/etc/rc.d/init.d [ 29s] + cp /home/abuild/rpmbuild/SOURCES/init /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/etc/rc.d/init.d/neard [ 29s] + chmod +x /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/etc/rc.d/init.d/neard [ 29s] + install -d /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/lib/systemd/system/ [ 29s] + install -m 644 /home/abuild/rpmbuild/SOURCES/neard.service /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/lib/systemd/system/neard.service [ 29s] + install -d /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/lib/systemd/system/network.target.wants/ [ 29s] + ln -s ../neard.service /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/lib/systemd/system/network.target.wants/neard.service [ 29s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/neard-tizen-0.10 [ 29s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/libexec/nfc/neard [ 29s] 1051 blocks [ 29s] + /usr/lib/rpm/check-buildroot [ 29s] + /usr/lib/rpm//brp-compress [ 29s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 29s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 29s] + /usr/lib/rpm/brp-python-bytecompile [ 29s] + /usr/lib/rpm/brp-python-hardlink [ 29s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386 [ 29s] Processing files: neard-tizen-0.10-1.1.i586 [ 29s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.Cac21W [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd neard-tizen-0.10 [ 29s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/share/doc/neard-tizen-0.10 [ 29s] + export DOCDIR [ 29s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/share/doc/neard-tizen-0.10 [ 29s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386/usr/share/doc/neard-tizen-0.10 [ 29s] + exit 0 [ 29s] Requires(interp): /bin/sh /bin/sh /bin/sh [ 29s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 29s] Requires(post): /bin/ln /bin/sh systemd [ 29s] Requires(preun): /bin/sh systemd [ 29s] Requires(postun): /bin/sh systemd [ 29s] Requires: /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libdbus-1.so.3 libdl.so.2 libdl.so.2(GLIBC_2.0) libdl.so.2(GLIBC_2.1) libglib-2.0.so.0 libnl-cli.so.2 libnl-genl.so.2 libnl-nf.so.2 libnl-route.so.2 libnl.so.2 [ 29s] Processing files: neard-tizen-devel-0.10-1.1.i586 [ 29s] Provides: pkgconfig(neard) = 0.10 [ 29s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 29s] Requires: /usr/bin/pkg-config pkgconfig(dbus-1) >= 1.2 pkgconfig(glib-2.0) >= 2.28 pkgconfig(libnl-2.0) [ 29s] Processing files: neard-tizen-test-0.10-1.1.i586 [ 29s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 29s] Requires: /usr/bin/python [ 29s] Processing files: neard-tizen-debuginfo-0.10-1.1.i586 [ 29s] Processing files: neard-tizen-debugsource-0.10-1.1.i586 [ 29s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386 [ 29s] Wrote: /home/abuild/rpmbuild/SRPMS/neard-tizen-0.10-1.1.src.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/i586/neard-tizen-0.10-1.1.i586.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/i586/neard-tizen-devel-0.10-1.1.i586.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/i586/neard-tizen-test-0.10-1.1.i586.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/i586/neard-tizen-debuginfo-0.10-1.1.i586.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/i586/neard-tizen-debugsource-0.10-1.1.i586.rpm [ 29s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.52Kcoj [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd neard-tizen-0.10 [ 29s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/neard-tizen-0.10-1.1.i386 [ 29s] + exit 0 [ 29s] ... checking for files with abuild user/group [ 29s] ... creating baselibs [ 29s] ... saving built packages [ 29s] /home/abuild/rpmbuild/RPMS/i586/neard-tizen-0.10-1.1.i586.rpm [ 29s] /home/abuild/rpmbuild/RPMS/i586/neard-tizen-debuginfo-0.10-1.1.i586.rpm [ 29s] /home/abuild/rpmbuild/RPMS/i586/neard-tizen-debugsource-0.10-1.1.i586.rpm [ 29s] /home/abuild/rpmbuild/RPMS/i586/neard-tizen-devel-0.10-1.1.i586.rpm [ 29s] /home/abuild/rpmbuild/RPMS/i586/neard-tizen-test-0.10-1.1.i586.rpm [ 29s] /home/abuild/rpmbuild/SRPMS/neard-tizen-0.10-1.1.src.rpm [ 29s] [ 29s] w05 finished "build neard.spec" at Wed Jul 17 06:02:45 UTC 2013. [ 29s] [ 33s] [ 27.372936] SysRq : Power Off [ 34s] [ 28.844110] Power down. [ 35s] build: extracting built packages... [ 35s] neard-tizen-0.10-1.1.i586.rpm [ 35s] neard-tizen-debuginfo-0.10-1.1.i586.rpm [ 35s] neard-tizen-debugsource-0.10-1.1.i586.rpm [ 35s] neard-tizen-devel-0.10-1.1.i586.rpm [ 35s] neard-tizen-test-0.10-1.1.i586.rpm [ 35s] neard-tizen-0.10-1.1.src.rpm