[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w04 started "build embryo.spec" at Wed Jul 17 06:04:34 UTC 2013. [ 0s] [ 0s] Building embryo for project 'Tizen:2.2:Main' repository 'emulator' arch 'i586' srcmd5 '0a126121719b69004ff1e5d03f2bdf57' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/embryo.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/embryo.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/embryo.spec build rpmlint-Factory ... [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: eglibc -> libgcc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: rpm -> rpm-libs [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/30] preinstalling libgcc... [ 1s] [2/30] preinstalling setup... [ 1s] [3/30] preinstalling filesystem... [ 1s] [4/30] preinstalling eglibc... [ 1s] [5/30] preinstalling bzip2-libs... [ 1s] [6/30] preinstalling elfutils-libelf... [ 1s] [7/30] preinstalling libattr... [ 1s] [8/30] preinstalling liblua... [ 1s] [9/30] preinstalling ncurses-libs... [ 1s] [10/30] preinstalling nspr... [ 1s] [11/30] preinstalling nss-softokn-freebl... [ 1s] [12/30] preinstalling popt... [ 1s] [13/30] preinstalling readline... [ 1s] [14/30] preinstalling sed... [ 1s] [15/30] preinstalling sqlite... [ 1s] [16/30] preinstalling xz-libs... [ 1s] [17/30] preinstalling zlib... [ 1s] [18/30] preinstalling bash... [ 1s] [19/30] preinstalling diffutils... [ 1s] [20/30] preinstalling libstdc++... [ 1s] [21/30] preinstalling eglibc-common... [ 1s] [22/30] preinstalling libacl... [ 1s] [23/30] preinstalling libcap... [ 1s] [24/30] preinstalling libfile... [ 1s] [25/30] preinstalling bzip2... [ 1s] [26/30] preinstalling nss... [ 1s] [27/30] preinstalling tar... [ 1s] [28/30] preinstalling coreutils... [ 1s] [29/30] preinstalling rpm-libs... [ 1s] [30/30] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm-libs -> rpm [ 2s] breaking dependency rpm -> rpm-libs [ 2s] done [ 3s] booting kvm ... [ 3s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_3/root,if=virtio,cache=unsafe -drive file=/srv/build/root_3/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_3/swap,if=virtio,cache=unsafe -smp 4 [ 4s]  [ 4s] Google, Inc. [ 4s] Serial Graphics Adapter 09/05/12 [ 4s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 4s] 4 0 [ 4s]  SeaBIOS (version 1.6.3-20120905_140109) [ 4s] [ 4s] Booting from ROM... [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 7s] udevd[224]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 7s] [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.20.1 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 6060/2097152 files, 198962/8388608 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 8s] sh: /sbin/modprobe: No such file or directory [ 8s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 8: interpreter '/usr/bin/qemu-arm-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 8s] 2nd stage started in virtual machine [ 8s] machine type: x86_64 [ 8s] switching personality to 8... [ 8s] 2nd stage started in virtual machine [ 8s] machine type: i686 [ 8s] [ 1.927694] EXT4-fs (vda): Cannot change data mode on remount [ 8s] mount: / not mounted or bad option [ 8s] swapon on /dev/vdb [ 8s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 8s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 8s] *********************************** [ 8s] VM_TYPE: kvm script: /.build/build [ 8s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 8s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/embryo.spec ... [ 8s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/embryo.spec build rpmlint-Factory ... [ 8s] initializing rpm db... [ 8s] [1/111] installing cloog-0.15.9-1.1 [ 8s] [2/111] installing kernel-headers-3.0.15-1.1 [ 8s] [3/111] installing tizen-release-2.2.0-1.1 [ 8s] [4/111] installing tzdata-2011h-1.1 [ 9s] [5/111] installing libgcc-4.5.3-1.2 [ 9s] [6/111] installing setup-0.1-1.1 [ 9s] [7/111] installing filesystem-0.1-1.1 [ 9s] warning: group lock does not exist - using root [ 9s] warning: group mail does not exist - using root [ 9s] [8/111] installing eglibc-2.13-1.4 [ 9s] [9/111] installing libstdc++-4.5.3-1.2 [ 9s] [10/111] installing bzip2-libs-1.0.5-4.1 [ 10s] [11/111] installing cpio-2.8-3.1 [ 10s] [12/111] installing e2fsprogs-libs-1.41.9-2.4 [ 10s] [13/111] installing elfutils-libelf-0.152-1.8 [ 10s] [14/111] installing findutils-4.2.31-1.1 [ 11s] [15/111] installing gdbm-1.8.3-1.1 [ 11s] [16/111] installing libattr-2.4.44-7.2 [ 11s] [17/111] installing libidn-1.15-6.1 [ 11s] [18/111] installing liblua-5.1.4-6.1 [ 11s] [19/111] installing libstdc++-devel-4.5.3-1.2 [ 11s] [20/111] installing libuuid-2.20.2-6.1 [ 11s] [21/111] installing lzo-2.03-1.1 [ 11s] [22/111] installing m4-1.4.14-1.1 [ 11s] [23/111] installing make-3.81-1.1 [ 11s] [24/111] installing net-tools-1.60-87.2 [ 11s] [25/111] installing nspr-4.8.7-1.3 [ 11s] [26/111] installing nss-softokn-freebl-3.12.9-3.6 [ 11s] [27/111] installing patch-2.6.1.169-1.1 [ 11s] [28/111] installing pkgconfig-0.25-2.1 [ 11s] [29/111] installing popt-1.16-3.1 [ 11s] [30/111] installing readline-5.2-13.1 [ 11s] [31/111] installing sed-4.1.5-2.1 [ 11s] [32/111] installing smack-1.0slp2+s11-1.1 [ 11s] [33/111] installing sqlite-3.7.13-1.1 [ 11s] [34/111] installing xz-libs-5.0.3-1.1 [ 11s] [35/111] installing zlib-1.2.5-2.6 [ 11s] [36/111] installing bash-4.1-3.1 [ 11s] [37/111] installing diffutils-3.0-3.1 [ 12s] [38/111] installing libgomp-4.5.3-1.2 [ 12s] [39/111] installing gmp-5.0.1-1.1 [ 12s] [40/111] installing libpcre-7.7-3.1 [ 12s] [41/111] installing ncurses-libs-5.7-4.1 [ 12s] [42/111] installing build-compare-2009.10.14-26.2 [ 12s] [43/111] installing emulator-macros-1-1.1 [ 12s] [44/111] installing c-ares-1.7.4-2.1 [ 12s] [45/111] installing eglibc-headers-2.13-1.4 [ 12s] [46/111] installing grep-2.5.1a-62.1 [ 12s] [47/111] installing libacl-2.2.49-2.1 [ 12s] [48/111] installing libcap-2.21-1.1 [ 12s] [49/111] installing libfile-5.04-1.1 [ 12s] [50/111] installing lzo-minilzo-2.03-1.1 [ 12s] [51/111] installing mpfr-3.0.0-1.1 [ 12s] [52/111] installing ncurses-5.7-4.1 [ 12s] [53/111] installing unzip-6.0-9.1 [ 12s] [54/111] installing zlib-devel-1.2.5-2.6 [ 12s] [55/111] installing bzip2-1.0.5-4.1 [ 12s] [56/111] installing libblkid-2.20.2-6.1 [ 12s] [57/111] installing smack-utils-1.0slp2+s11-1.1 [ 12s] [58/111] installing xz-5.0.3-1.1 [ 12s] [59/111] installing binutils-2.22-1.2 [ 12s] [60/111] installing ppl-0.10.2-10.1 [ 13s] [61/111] installing elfutils-libs-0.152-1.8 [ 13s] [62/111] installing nss-3.12.9-3.6 [ 13s] [63/111] installing perl-5.12.1-61.3 [ 16s] [64/111] installing ncurses-base-5.7-4.1 [ 16s] [65/111] installing perl-HTML-Tagset-3.20-8.1 [ 16s] [66/111] installing perl-IO-Compress-Base-2.008-61.3 [ 16s] [67/111] installing perl-Module-Pluggable-3.60-61.3 [ 16s] [68/111] installing perl-Pod-Escapes-1.04-61.3 [ 16s] [69/111] installing perl-TimeDate-1.20-1.1 [ 16s] [70/111] installing eglibc-devel-2.13-1.4 [ 16s] [71/111] installing perl-Compress-Raw-Zlib-2.008-61.3 [ 16s] [72/111] installing perl-libs-5.12.1-61.3 [ 16s] [73/111] installing tar-1.17-4.1 [ 16s] [74/111] installing coreutils-6.9-9.1 [ 16s] [75/111] installing file-5.04-1.1 [ 16s] [76/111] installing libdlog-0.4.1-16.1 [ 16s] chown: `root:app_logging': invalid user [ 16s] [77/111] installing libmount-2.20.2-6.1 [ 16s] [78/111] installing lzo-devel-2.03-1.1 [ 16s] [79/111] installing mpc-0.9-1.1 [ 16s] [80/111] installing openssl-1.0.1c-1.8 [ 16s] [81/111] installing perl-devel-5.12.1-61.3 [ 16s] [82/111] installing xz-lzma-compat-5.0.3-1.1 [ 16s] [83/111] installing cloog-ppl-0.15.9-1.1 [ 16s] [84/111] installing nss-sysinit-3.12.9-3.6 [ 16s] [85/111] installing elfutils-0.152-1.8 [ 17s] [86/111] installing eglibc-common-2.13-1.4 [ 18s] [87/111] installing eina-1.7.1+svn.77445+build06-1.1 [ 18s] [88/111] installing libdlog-devel-0.4.1-16.1 [ 18s] [89/111] installing perl-ExtUtils-ParseXS-2.18-61.3 [ 18s] [90/111] installing perl-Pod-Simple-3.07-61.3 [ 18s] [91/111] installing perl-Test-Simple-0.80-61.3 [ 18s] [92/111] installing gawk-3.1.5-1.1 [ 18s] [93/111] installing gzip-1.3.14-2.1 [ 18s] [94/111] installing perl-IO-Compress-Zlib-2.008-61.3 [ 18s] [95/111] installing perl-Test-Harness-3.12-61.3 [ 18s] [96/111] installing build-2011.01.10a-1.1 [ 18s] [97/111] installing libcurl-7.28.1-2.1 [ 18s] [98/111] installing util-linux-2.20.2-6.1 [ 18s] warning: group tty does not exist - using root [ 18s] /bin/chown: `root:root': invalid user [ 18s] [99/111] installing cpp-4.5.3-1.2 [ 18s] [100/111] installing eina-devel-1.7.1+svn.77445+build06-1.1 [ 18s] [101/111] installing perl-ExtUtils-MakeMaker-6.36-61.3 [ 18s] [102/111] installing curl-7.28.1-2.1 [ 18s] [103/111] installing gcc-4.5.3-1.2 [ 19s] [104/111] installing perl-CPAN-1.9205-61.3 [ 19s] [105/111] installing autoconf-2.68-1.1 [ 19s] [106/111] installing gcc-c++-4.5.3-1.2 [ 19s] [107/111] installing rpm-4.9.1-4.1 [ 19s] [108/111] installing automake-1.11.1-3.1 [ 19s] [109/111] installing rpm-libs-4.9.1-4.1 [ 19s] [110/111] installing libtool-2.2.6b-1.1 [ 19s] [111/111] installing rpm-build-4.9.1-4.1 [ 19s] now finalizing build dir... [ 19s] /.build/build: line 2269: //etc/passwd: No such file or directory [ 20s] ----------------------------------------------------------------- [ 20s] I have the following modifications for embryo.spec: [ 20s] 5c5 [ 20s] < Release: 1 [ 20s] --- [ 20s] > Release: 1.1 [ 20s] ----------------------------------------------------------------- [ 20s] ----- building embryo.spec (user abuild) [ 20s] ----------------------------------------------------------------- [ 20s] ----------------------------------------------------------------- [ 20s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.2:Main/emulator/0a126121719b69004ff1e5d03f2bdf57-embryo' /home/abuild/rpmbuild/SOURCES/embryo.spec [ 20s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ZNggrB [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + LANG=C [ 20s] + export LANG [ 20s] + unset DISPLAY [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + rm -rf embryo-1.7.1+svn.76491slp2+build01 [ 20s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/embryo-1.7.1+svn.76491slp2+build01.tar.gz [ 20s] + /bin/tar -xf - [ 20s] + STATUS=0 [ 20s] + '[' 0 -ne 0 ']' [ 20s] + cd embryo-1.7.1+svn.76491slp2+build01 [ 20s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 20s] + exit 0 [ 20s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Y7YHlD [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd embryo-1.7.1+svn.76491slp2+build01 [ 20s] + LANG=C [ 20s] + export LANG [ 20s] + unset DISPLAY [ 20s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 20s] + export CFLAGS [ 20s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 20s] + export CXXFLAGS [ 20s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 20s] + export FFLAGS [ 20s] + LD_AS_NEEDED=1 [ 20s] + export LD_AS_NEEDED [ 20s] + export 'CFLAGS+= -fvisibility=hidden -fPIC' [ 20s] + CFLAGS+=' -fvisibility=hidden -fPIC' [ 20s] + export 'LDFLAGS+= -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed' [ 20s] + LDFLAGS+=' -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed' [ 20s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fvisibility=hidden -fPIC' [ 20s] + export CFLAGS [ 20s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 20s] + export CXXFLAGS [ 20s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 20s] + export FFLAGS [ 20s] + ./autogen.sh --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 20s] Running aclocal... [ 21s] sh: svnversion: command not found [ 21s] Running autoheader... [ 21s] sh: svnversion: command not found [ 22s] Running autoconf... [ 22s] Running libtoolize... [ 23s] Running automake... [ 23s] configure.ac:139: installing `./compile' [ 23s] configure.ac:38: installing `./config.guess' [ 23s] configure.ac:38: installing `./config.sub' [ 23s] configure.ac:35: installing `./install-sh' [ 23s] configure.ac:35: installing `./missing' [ 23s] doc/Makefile.am:33: wildcard img/*.*: non-POSIX variable name [ 23s] doc/Makefile.am:33: (probably a GNU make extension) [ 23s] src/bin/Makefile.am: installing `./depcomp' [ 23s] cmp: config.cache-env: No such file or directory [ 23s] Cleaning configure cache... [ 23s] configure: creating cache config.cache [ 23s] checking for a BSD-compatible install... /usr/bin/install -c [ 24s] checking whether build environment is sane... yes [ 24s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 24s] checking for gawk... gawk [ 24s] checking whether make sets $(MAKE)... yes [ 24s] checking build system type... i686-pc-linux-gnu [ 24s] checking host system type... i686-pc-linux-gnu [ 24s] checking for style of include used by make... GNU [ 24s] checking for i686-pc-linux-gnu-gcc... no [ 24s] checking for gcc... gcc [ 25s] checking whether the C compiler works... yes [ 25s] checking for C compiler default output file name... a.out [ 25s] checking for suffix of executables... [ 25s] checking whether we are cross compiling... no [ 25s] checking for suffix of object files... o [ 25s] checking whether we are using the GNU C compiler... yes [ 25s] checking whether gcc accepts -g... yes [ 25s] checking for gcc option to accept ISO C89... none needed [ 25s] checking dependency style of gcc... gcc3 [ 25s] checking for a sed that does not truncate output... /bin/sed [ 25s] checking for grep that handles long lines and -e... /bin/grep [ 25s] checking for egrep... /bin/grep -E [ 25s] checking for fgrep... /bin/grep -F [ 25s] checking for ld used by gcc... /usr/bin/ld [ 25s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 25s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 25s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 25s] checking whether ln -s works... yes [ 25s] checking the maximum length of command line arguments... 1572864 [ 25s] checking whether the shell understands some XSI constructs... yes [ 25s] checking whether the shell understands "+="... yes [ 25s] checking for /usr/bin/ld option to reload object files... -r [ 25s] checking for i686-pc-linux-gnu-objdump... objdump [ 25s] checking how to recognize dependent libraries... pass_all [ 25s] checking for i686-pc-linux-gnu-ar... no [ 25s] checking for ar... ar [ 25s] checking for i686-pc-linux-gnu-strip... no [ 25s] checking for strip... strip [ 25s] checking for i686-pc-linux-gnu-ranlib... no [ 25s] checking for ranlib... ranlib [ 25s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 25s] checking how to run the C preprocessor... gcc -E [ 25s] checking for ANSI C header files... yes [ 25s] checking for sys/types.h... yes [ 25s] checking for sys/stat.h... yes [ 25s] checking for stdlib.h... yes [ 25s] checking for string.h... yes [ 25s] checking for memory.h... yes [ 25s] checking for strings.h... yes [ 25s] checking for inttypes.h... yes [ 25s] checking for stdint.h... yes [ 25s] checking for unistd.h... yes [ 25s] checking for dlfcn.h... yes [ 25s] checking for objdir... .libs [ 25s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 25s] checking for gcc option to produce PIC... -fPIC -DPIC [ 25s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 25s] checking if gcc static flag -static works... no [ 25s] checking if gcc supports -c -o file.o... yes [ 25s] checking if gcc supports -c -o file.o... (cached) yes [ 25s] checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes [ 25s] checking whether -lc should be explicitly linked in... no [ 25s] checking dynamic linker characteristics... GNU/Linux ld.so [ 25s] checking how to hardcode library paths into programs... immediate [ 25s] checking whether stripping libraries is possible... yes [ 25s] checking if libtool supports shared libraries... yes [ 25s] checking whether to build shared libraries... yes [ 25s] checking whether to build static libraries... no [ 25s] checking whether to build embryo_cc binary... yes [ 25s] checking for i686-pc-linux-gnu-gcc... gcc [ 25s] checking whether we are using the GNU C compiler... (cached) yes [ 25s] checking whether gcc accepts -g... (cached) yes [ 25s] checking for gcc option to accept ISO C89... (cached) none needed [ 25s] checking dependency style of gcc... (cached) gcc3 [ 25s] checking whether to build documentation... yes [ 25s] checking for doxygen... no [ 25s] WARNING: [ 25s] The doxygen program was not found in your execute path. [ 25s] You may have doxygen installed somewhere not covered by your path. [ 25s] [ 25s] If this is the case make sure you have the packages installed, AND [ 25s] that the doxygen program is in your execute path (see your [ 25s] shell manual page on setting the $PATH environment variable), OR [ 25s] alternatively, specify the program to use with --with-doxygen. [ 25s] configure: WARNING: no doxygen detected. Documentation will not be built [ 25s] checking for i686-pc-linux-gnu-pkg-config... no [ 25s] checking for pkg-config... /usr/bin/pkg-config [ 25s] checking pkg-config is at least version 0.9.0... yes [ 25s] checking for EINA... yes [ 25s] checking for EXOTIC... no [ 25s] checking for unistd.h... (cached) yes [ 25s] checking for PATH_MAX in limits.h... yes [ 26s] checking whether byte ordering is bigendian... no [ 26s] checking whether gcc and cc understand -c and -o together... yes [ 26s] checking for an ANSI C-conforming const... yes [ 26s] checking for inline... inline [ 26s] checking for gcc option to accept ISO C99... -std=gnu99 [ 26s] checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 26s] checking for ANSI C header files... (cached) yes [ 26s] checking for __attribute__... yes [ 26s] checking for library containing strerror... none required [ 26s] checking for size_t... yes [ 26s] checking for working alloca.h... yes [ 26s] checking for alloca... yes [ 26s] checking fnmatch.h usability... yes [ 26s] checking fnmatch.h presence... yes [ 26s] checking for fnmatch.h... yes [ 26s] checking for library containing fnmatch... none required [ 26s] configure: updating cache config.cache [ 26s] configure: creating ./config.status [ 26s] config.status: creating Makefile [ 26s] config.status: creating doc/Makefile [ 26s] config.status: creating doc/Doxyfile [ 26s] config.status: creating doc/embryo.dox [ 26s] config.status: creating embryo.pc [ 26s] config.status: creating include/Makefile [ 26s] config.status: creating src/Makefile [ 26s] config.status: creating src/lib/Makefile [ 26s] config.status: creating src/bin/Makefile [ 26s] config.status: creating embryo.spec [ 26s] config.status: creating config.h [ 26s] config.status: executing depfiles commands [ 27s] config.status: executing libtool commands [ 27s] [ 27s] [ 27s] [ 27s] ------------------------------------------------------------------------ [ 27s] embryo 1.7.99.0 [ 27s] ------------------------------------------------------------------------ [ 27s] [ 27s] Configuration Options Summary: [ 27s] [ 27s] Build embryo_cc......: yes [ 27s] [ 27s] Documentation........: no [ 27s] [ 27s] Compilation............: make (or gmake) [ 27s] CPPFLAGS.............: [ 27s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fvisibility=hidden -fPIC [ 27s] LDFLAGS..............: -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed [ 27s] [ 27s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 27s] prefix...............: /usr [ 27s] [ 27s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fvisibility=hidden -fPIC' [ 27s] + export CFLAGS [ 27s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 27s] + export CXXFLAGS [ 27s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 27s] + export FFLAGS [ 27s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 27s] checking for a BSD-compatible install... /usr/bin/install -c [ 28s] checking whether build environment is sane... yes [ 28s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 28s] checking for gawk... gawk [ 28s] checking whether make sets $(MAKE)... yes [ 28s] checking build system type... i686-pc-linux-gnu [ 28s] checking host system type... i686-pc-linux-gnu [ 28s] checking for style of include used by make... GNU [ 28s] checking for i686-pc-linux-gnu-gcc... no [ 28s] checking for gcc... gcc [ 28s] checking whether the C compiler works... yes [ 28s] checking for C compiler default output file name... a.out [ 28s] checking for suffix of executables... [ 28s] checking whether we are cross compiling... no [ 28s] checking for suffix of object files... o [ 28s] checking whether we are using the GNU C compiler... yes [ 28s] checking whether gcc accepts -g... yes [ 28s] checking for gcc option to accept ISO C89... none needed [ 28s] checking dependency style of gcc... gcc3 [ 28s] checking for a sed that does not truncate output... /bin/sed [ 28s] checking for grep that handles long lines and -e... /bin/grep [ 28s] checking for egrep... /bin/grep -E [ 28s] checking for fgrep... /bin/grep -F [ 28s] checking for ld used by gcc... /usr/bin/ld [ 28s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 28s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 28s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 28s] checking whether ln -s works... yes [ 28s] checking the maximum length of command line arguments... 1572864 [ 28s] checking whether the shell understands some XSI constructs... yes [ 28s] checking whether the shell understands "+="... yes [ 28s] checking for /usr/bin/ld option to reload object files... -r [ 28s] checking for i686-pc-linux-gnu-objdump... objdump [ 28s] checking how to recognize dependent libraries... pass_all [ 28s] checking for i686-pc-linux-gnu-ar... no [ 28s] checking for ar... ar [ 28s] checking for i686-pc-linux-gnu-strip... no [ 28s] checking for strip... strip [ 28s] checking for i686-pc-linux-gnu-ranlib... no [ 28s] checking for ranlib... ranlib [ 28s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 28s] checking how to run the C preprocessor... gcc -E [ 28s] checking for ANSI C header files... yes [ 28s] checking for sys/types.h... yes [ 28s] checking for sys/stat.h... yes [ 28s] checking for stdlib.h... yes [ 28s] checking for string.h... yes [ 28s] checking for memory.h... yes [ 28s] checking for strings.h... yes [ 28s] checking for inttypes.h... yes [ 28s] checking for stdint.h... yes [ 28s] checking for unistd.h... yes [ 28s] checking for dlfcn.h... yes [ 28s] checking for objdir... .libs [ 29s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 29s] checking for gcc option to produce PIC... -fPIC -DPIC [ 29s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 29s] checking if gcc static flag -static works... no [ 29s] checking if gcc supports -c -o file.o... yes [ 29s] checking if gcc supports -c -o file.o... (cached) yes [ 29s] checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes [ 29s] checking whether -lc should be explicitly linked in... no [ 29s] checking dynamic linker characteristics... GNU/Linux ld.so [ 29s] checking how to hardcode library paths into programs... immediate [ 29s] checking whether stripping libraries is possible... yes [ 29s] checking if libtool supports shared libraries... yes [ 29s] checking whether to build shared libraries... yes [ 29s] checking whether to build static libraries... no [ 29s] checking whether to build embryo_cc binary... yes [ 29s] checking for i686-pc-linux-gnu-gcc... gcc [ 29s] checking whether we are using the GNU C compiler... (cached) yes [ 29s] checking whether gcc accepts -g... (cached) yes [ 29s] checking for gcc option to accept ISO C89... (cached) none needed [ 29s] checking dependency style of gcc... (cached) gcc3 [ 29s] checking whether to build documentation... yes [ 29s] checking for doxygen... no [ 29s] WARNING: [ 29s] The doxygen program was not found in your execute path. [ 29s] You may have doxygen installed somewhere not covered by your path. [ 29s] [ 29s] If this is the case make sure you have the packages installed, AND [ 29s] that the doxygen program is in your execute path (see your [ 29s] shell manual page on setting the $PATH environment variable), OR [ 29s] alternatively, specify the program to use with --with-doxygen. [ 29s] configure: WARNING: no doxygen detected. Documentation will not be built [ 29s] checking for i686-pc-linux-gnu-pkg-config... no [ 29s] checking for pkg-config... /usr/bin/pkg-config [ 29s] checking pkg-config is at least version 0.9.0... yes [ 29s] checking for EINA... yes [ 29s] checking for EXOTIC... no [ 29s] checking for unistd.h... (cached) yes [ 29s] checking for PATH_MAX in limits.h... yes [ 29s] checking whether byte ordering is bigendian... no [ 29s] checking whether gcc and cc understand -c and -o together... yes [ 29s] checking for an ANSI C-conforming const... yes [ 29s] checking for inline... inline [ 29s] checking for gcc option to accept ISO C99... -std=gnu99 [ 29s] checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 29s] checking for ANSI C header files... (cached) yes [ 29s] checking for __attribute__... yes [ 29s] checking for library containing strerror... none required [ 29s] checking for size_t... yes [ 29s] checking for working alloca.h... yes [ 29s] checking for alloca... yes [ 29s] checking fnmatch.h usability... yes [ 29s] checking fnmatch.h presence... yes [ 29s] checking for fnmatch.h... yes [ 29s] checking for library containing fnmatch... none required [ 29s] configure: creating ./config.status [ 30s] config.status: creating Makefile [ 30s] config.status: creating doc/Makefile [ 30s] config.status: creating doc/Doxyfile [ 30s] config.status: creating doc/embryo.dox [ 30s] config.status: creating embryo.pc [ 30s] config.status: creating include/Makefile [ 30s] config.status: creating src/Makefile [ 30s] config.status: creating src/lib/Makefile [ 30s] config.status: creating src/bin/Makefile [ 30s] config.status: creating embryo.spec [ 30s] config.status: creating config.h [ 30s] config.status: config.h is unchanged [ 30s] config.status: executing depfiles commands [ 30s] config.status: executing libtool commands [ 30s] [ 30s] [ 30s] [ 30s] ------------------------------------------------------------------------ [ 30s] embryo 1.7.99.0 [ 30s] ------------------------------------------------------------------------ [ 30s] [ 30s] Configuration Options Summary: [ 30s] [ 30s] Build embryo_cc......: yes [ 30s] [ 30s] Documentation........: no [ 30s] [ 30s] Compilation............: make (or gmake) [ 30s] CPPFLAGS.............: [ 30s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fvisibility=hidden -fPIC [ 30s] LDFLAGS..............: -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed [ 30s] [ 30s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 30s] prefix...............: /usr [ 30s] [ 30s] + make -j4 [ 30s] make all-recursive [ 30s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 30s] Making all in src [ 30s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 30s] Making all in lib [ 30s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/lib' [ 30s] CC libembryo_la-embryo_amx.lo [ 30s] CC libembryo_la-embryo_args.lo [ 30s] CC libembryo_la-embryo_float.lo [ 30s] CC libembryo_la-embryo_main.lo [ 30s] CC libembryo_la-embryo_rand.lo [ 30s] CC libembryo_la-embryo_str.lo [ 30s] CC libembryo_la-embryo_time.lo [ 30s] CCLD libembryo.la [ 30s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/lib' [ 30s] Making all in bin [ 30s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/bin' [ 30s] CC embryo_cc-embryo_cc_sc1.o [ 30s] CC embryo_cc-embryo_cc_sc2.o [ 30s] CC embryo_cc-embryo_cc_sc3.o [ 30s] CC embryo_cc-embryo_cc_sc4.o [ 31s] CC embryo_cc-embryo_cc_sc5.o [ 31s] CC embryo_cc-embryo_cc_sc6.o [ 31s] CC embryo_cc-embryo_cc_sc7.o [ 31s] CC embryo_cc-embryo_cc_scexpand.o [ 31s] CC embryo_cc-embryo_cc_sclist.o [ 31s] CC embryo_cc-embryo_cc_scvars.o [ 31s] CC embryo_cc-embryo_cc_prefix.o [ 31s] CCLD embryo_cc [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/bin' [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 32s] make[3]: Nothing to be done for `all-am'. [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 32s] Making all in include [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/include' [ 32s] make[2]: Nothing to be done for `all'. [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/include' [ 32s] Making all in doc [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/doc' [ 32s] make[2]: Nothing to be done for `all'. [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/doc' [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 32s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 32s] + exit 0 [ 32s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ZKY2Zn [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd embryo-1.7.1+svn.76491slp2+build01 [ 32s] + LANG=C [ 32s] + export LANG [ 32s] + unset DISPLAY [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386 [ 32s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386 [ 32s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386 install [ 32s] Making install in src [ 32s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 32s] Making install in lib [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/lib' [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/lib' [ 32s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/lib" [ 32s] /bin/sh ../../libtool --mode=install /usr/bin/install -c libembryo.la '/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/lib' [ 32s] libtool: install: /usr/bin/install -c .libs/libembryo.so.1.7.99 /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/lib/libembryo.so.1.7.99 [ 32s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/lib && { ln -s -f libembryo.so.1.7.99 libembryo.so.1 || { rm -f libembryo.so.1 && ln -s libembryo.so.1.7.99 libembryo.so.1; }; }) [ 32s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/lib && { ln -s -f libembryo.so.1.7.99 libembryo.so || { rm -f libembryo.so && ln -s libembryo.so.1.7.99 libembryo.so; }; }) [ 32s] libtool: install: /usr/bin/install -c .libs/libembryo.lai /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/lib/libembryo.la [ 32s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 32s] test -z "/usr/include/embryo-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/include/embryo-1" [ 32s] /usr/bin/install -c -m 644 Embryo.h '/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/include/embryo-1' [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/lib' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/lib' [ 32s] Making install in bin [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/bin' [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/bin' [ 32s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/bin" [ 32s] /bin/sh ../../libtool --mode=install /usr/bin/install -c embryo_cc '/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/bin' [ 32s] libtool: install: warning: `../../src/lib/libembryo.la' has not been installed in `/usr/lib' [ 32s] libtool: install: /usr/bin/install -c .libs/embryo_cc /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/bin/embryo_cc [ 32s] make[3]: Nothing to be done for `install-data-am'. [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/bin' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/bin' [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 32s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 32s] make[3]: Nothing to be done for `install-exec-am'. [ 32s] make[3]: Nothing to be done for `install-data-am'. [ 32s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 32s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 32s] Making install in include [ 32s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/include' [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/include' [ 32s] make[2]: Nothing to be done for `install-exec-am'. [ 32s] test -z "/usr/share/embryo/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/share/embryo/include" [ 32s] /usr/bin/install -c -m 644 default.inc '/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/share/embryo/include' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/include' [ 32s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/include' [ 32s] Making install in doc [ 32s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/doc' [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/doc' [ 32s] make[2]: Nothing to be done for `install-exec-am'. [ 32s] make[2]: Nothing to be done for `install-data-am'. [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/doc' [ 32s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/doc' [ 32s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 32s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 32s] make[2]: Nothing to be done for `install-exec-am'. [ 32s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/lib/pkgconfig" [ 32s] /usr/bin/install -c -m 644 embryo.pc '/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/lib/pkgconfig' [ 32s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 32s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 32s] + rm -f /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/share/info/dir [ 32s] + xargs rm -f -- [ 32s] + find /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386 -regex '.*\.la$' [ 32s] + find /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386 -regex '.*\.a$' [ 32s] + xargs rm -f -- [ 32s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/share/license [ 32s] + cp /home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/COPYING /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/share/license/embryo [ 32s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01 [ 32s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/bin/embryo_cc [ 32s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386/usr/lib/libembryo.so.1.7.99 [ 32s] symlinked /usr/lib/debug/usr/lib/libembryo.so.1.7.99.debug to /usr/lib/debug/usr/lib/libembryo.so.1.debug [ 32s] symlinked /usr/lib/debug/usr/lib/libembryo.so.1.7.99.debug to /usr/lib/debug/usr/lib/libembryo.so.debug [ 32s] 1130 blocks [ 32s] + /usr/lib/rpm/check-buildroot [ 32s] + /usr/lib/rpm//brp-compress [ 32s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 32s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 32s] + /usr/lib/rpm/brp-python-bytecompile [ 32s] + /usr/lib/rpm/brp-python-hardlink [ 32s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386 [ 32s] Processing files: embryo-1.7.1+svn.76491slp2+build01-1.1.i586 [ 32s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 32s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 32s] [ 32s] Provides: embryo-bin libembryo.so.1 [ 32s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 32s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 32s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 32s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 32s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.2.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libeina.so.1 libm.so.6 libm.so.6(GLIBC_2.0) libm.so.6(GLIBC_2.1) libpthread.so.0 [ 32s] Processing files: embryo-devel-1.7.1+svn.76491slp2+build01-1.1.i586 [ 32s] Provides: pkgconfig(embryo) = 1.7.99.0 [ 32s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 32s] Requires: /usr/bin/pkg-config libembryo.so.1 [ 32s] Processing files: embryo-debuginfo-1.7.1+svn.76491slp2+build01-1.1.i586 [ 32s] Processing files: embryo-debugsource-1.7.1+svn.76491slp2+build01-1.1.i586 [ 32s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386 [ 32s] Wrote: /home/abuild/rpmbuild/SRPMS/embryo-1.7.1+svn.76491slp2+build01-1.1.src.rpm [ 32s] Wrote: /home/abuild/rpmbuild/RPMS/i586/embryo-1.7.1+svn.76491slp2+build01-1.1.i586.rpm [ 32s] Wrote: /home/abuild/rpmbuild/RPMS/i586/embryo-devel-1.7.1+svn.76491slp2+build01-1.1.i586.rpm [ 32s] Wrote: /home/abuild/rpmbuild/RPMS/i586/embryo-debuginfo-1.7.1+svn.76491slp2+build01-1.1.i586.rpm [ 32s] Wrote: /home/abuild/rpmbuild/RPMS/i586/embryo-debugsource-1.7.1+svn.76491slp2+build01-1.1.i586.rpm [ 32s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.7DCzK4 [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd embryo-1.7.1+svn.76491slp2+build01 [ 32s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.i386 [ 32s] + exit 0 [ 32s] ... checking for files with abuild user/group [ 32s] ... creating baselibs [ 32s] ... saving built packages [ 32s] /home/abuild/rpmbuild/RPMS/i586/embryo-1.7.1+svn.76491slp2+build01-1.1.i586.rpm [ 32s] /home/abuild/rpmbuild/RPMS/i586/embryo-debuginfo-1.7.1+svn.76491slp2+build01-1.1.i586.rpm [ 32s] /home/abuild/rpmbuild/RPMS/i586/embryo-debugsource-1.7.1+svn.76491slp2+build01-1.1.i586.rpm [ 32s] /home/abuild/rpmbuild/RPMS/i586/embryo-devel-1.7.1+svn.76491slp2+build01-1.1.i586.rpm [ 32s] /home/abuild/rpmbuild/SRPMS/embryo-1.7.1+svn.76491slp2+build01-1.1.src.rpm [ 32s] [ 32s] w04 finished "build embryo.spec" at Wed Jul 17 06:05:04 UTC 2013. [ 32s] [ 35s] [ 29.333796] SysRq : Power Off