[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w10 started "build alsa-scenario-scn-data-0-base.spec" at Thu Nov 7 08:27:59 UTC 2013. [ 0s] [ 0s] Building alsa-scenario-scn-data-0-base for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 'e7bcf7ade408d411d333879ff44faf6e' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/alsa-scenario-scn-data-0-base.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/alsa-scenario-scn-data-0-base.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/alsa-scenario-scn-data-0-base.spec build rpmlint-Factory ... [ 0s] hostname: Name or service not known [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 3s] [33/56] preinstalling rpm-libs... [ 3s] [34/56] preinstalling gmp-x86-arm... [ 3s] [35/56] preinstalling mpc-x86-arm... [ 3s] [36/56] preinstalling mpfr-x86-arm... [ 3s] [37/56] preinstalling bzip2-libs-x86-arm... [ 3s] [38/56] preinstalling eglibc-x86-arm... [ 4s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 4s] [40/56] preinstalling libacl-x86-arm... [ 4s] [41/56] preinstalling libattr-x86-arm... [ 4s] [42/56] preinstalling libcap-x86-arm... [ 4s] [43/56] preinstalling libfile-x86-arm... [ 4s] [44/56] preinstalling libgcc-x86-arm... [ 4s] [45/56] preinstalling liblua-x86-arm... [ 4s] [46/56] preinstalling ncurses-libs-x86-arm... [ 4s] [47/56] preinstalling nspr-x86-arm... [ 4s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 4s] [49/56] preinstalling nss-x86-arm... [ 4s] [50/56] preinstalling popt-x86-arm... [ 4s] [51/56] preinstalling rpm-libs-x86-arm... [ 4s] [52/56] preinstalling sqlite-x86-arm... [ 4s] [53/56] preinstalling xz-libs-x86-arm... [ 4s] [54/56] preinstalling zlib-x86-arm... [ 4s] [55/56] preinstalling bash-x86-arm... [ 4s] [56/56] preinstalling rpm-x86-arm... [ 4s] [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl-libs -> perl [ 4s] [1/8] preinstalling e2fsprogs-libs... [ 4s] [2/8] preinstalling libpcre... [ 4s] [3/8] preinstalling libuuid... [ 4s] [4/8] preinstalling grep... [ 4s] [5/8] preinstalling libblkid... [ 4s] [6/8] preinstalling util-linux... [ 4s] [7/8] preinstalling perl-libs... [ 4s] [8/8] preinstalling perl... [ 5s] copying packages... [ 5s] reordering...cycle: bash -> eglibc -> eglibc-common [ 5s] breaking dependency eglibc-common -> bash [ 5s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 5s] breaking dependency eglibc-common -> coreutils [ 5s] cycle: eglibc -> eglibc-common [ 5s] breaking dependency eglibc-common -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> findutils [ 5s] breaking dependency eglibc-common -> findutils [ 5s] cycle: eglibc -> eglibc-common -> grep [ 5s] breaking dependency grep -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 5s] breaking dependency grep -> libgcc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 5s] breaking dependency libpcre -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 5s] breaking dependency libpcre -> libgcc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 5s] breaking dependency libstdc++ -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 5s] breaking dependency eglibc-common -> grep [ 5s] cycle: eglibc -> eglibc-common -> libgcc [ 5s] breaking dependency eglibc -> eglibc-common [ 5s] cycle: eglibc -> libgcc [ 5s] breaking dependency libgcc -> eglibc [ 5s] cycle: filesystem -> setup [ 5s] breaking dependency setup -> filesystem [ 5s] cycle: ncurses -> ncurses-libs [ 5s] breaking dependency ncurses-libs -> ncurses [ 5s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 5s] breaking dependency ncurses-libs -> ncurses-base [ 5s] cycle: perl -> perl-libs [ 5s] breaking dependency perl -> perl-libs [ 5s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 5s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 5s] cycle: perl -> perl-IO-Compress-Zlib [ 5s] breaking dependency perl -> perl-IO-Compress-Zlib [ 5s] cycle: perl -> perl-IO-Compress-Base [ 5s] breaking dependency perl -> perl-IO-Compress-Base [ 5s] cycle: perl -> perl-Module-Pluggable [ 5s] breaking dependency perl -> perl-Module-Pluggable [ 5s] cycle: perl -> perl-Pod-Simple [ 5s] breaking dependency perl -> perl-Pod-Simple [ 5s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 5s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 5s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 5s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 5s] cycle: nss -> nss-sysinit [ 5s] breaking dependency nss -> nss-sysinit [ 5s] cycle: perl-CPAN -> perl-Test-Harness [ 5s] breaking dependency perl-Test-Harness -> perl-CPAN [ 5s] cycle: rpm-libs -> rpm [ 5s] breaking dependency rpm -> rpm-libs [ 5s] done [ 20s] booting kvm ... [ 20s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 24s] [ 0.000000] tsc: Fast TSC calibration failed [ 25s] doing fast boot [ 25s] Creating device nodes with udev [ 43s] Waiting for device /dev/vda to appear: ok [ 43s] fsck from util-linux 2.21.2 [ 43s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 45s] /dev/vda: clean, 6814/2097152 files, 238735/8388608 blocks [ 45s] fsck succeeded. Mounting root device read-write. [ 45s] Mounting root /dev/vda [ 45s] mount -o rw -t ext4 /dev/vda /root [ 66s] replacing /etc/mtab with symlink to /proc/self/mounts [ 73s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 108s] 2nd stage started in virtual machine [ 109s] machine type: armv7l [ 109s] switching personality to 8... [ 109s] 2nd stage started in virtual machine [ 109s] machine type: armv7l [ 111s] swapon on /dev/vdb [ 111s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 111s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 115s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 117s] logging output to //.build.log... [ 119s] processing specfile /.build-srcdir/alsa-scenario-scn-data-0-base.spec ... [ 119s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/alsa-scenario-scn-data-0-base.spec build rpmlint-Factory ... [ 141s] running rpm-x86-arm postinstall script [ 141s] /bin/rpm [ 141s] /usr/bin/rpm2cpio [ 142s] /usr/bin/rpmdb [ 142s] /usr/bin/rpmquery [ 142s] /usr/bin/rpmsign [ 142s] /usr/bin/rpmverify [ 142s] running rpm-libs-x86-arm postinstall script [ 142s] running tizen-accelerator postinstall script [ 143s] running bash-x86-arm postinstall script [ 143s] initializing rpm db... [ 148s] [1/143] installing kernel-headers-3.0.15-1.9 [ 149s] [2/143] installing tizen-release-2.2.0-1.8 [ 149s] [3/143] installing tzdata-2011h-1.9 [ 149s] [4/143] installing libgcc-4.5.3-2.33 [ 150s] [5/143] installing setup-0.1-2.5 [ 150s] [6/143] installing filesystem-0.1-1.8 [ 152s] warning: group lock does not exist - using root [ 152s] warning: group mail does not exist - using root [ 152s] [7/143] installing eglibc-2.13-2.18 [ 152s] [8/143] installing libstdc++-4.5.3-2.33 [ 153s] [9/143] installing eglibc-common-2.13-2.18 [ 160s] /var/tmp/rpm-tmp.DzD0lo: line 2: /usr/bin/xargs: No such file or directory [ 160s] [10/143] installing libstdc++-devel-4.5.3-2.33 [ 161s] [11/143] installing bash-4.1-4.8 [ 162s] [12/143] installing bzip2-libs-1.0.5-5.12 [ 162s] [13/143] installing c-ares-1.7.4-3.22 [ 163s] [14/143] installing cpio-2.8-4.7 [ 163s] [15/143] installing diffutils-3.0-4.8 [ 163s] [16/143] installing e2fsprogs-libs-1.41.9-3.7 [ 164s] [17/143] installing elfutils-libelf-0.152-2.16 [ 164s] [18/143] installing fdupes-1.40-42.9 [ 164s] [19/143] installing findutils-4.2.31-2.7 [ 164s] [20/143] installing gdbm-1.8.3-2.33 [ 165s] [21/143] installing libattr-2.4.44-8.12 [ 165s] [22/143] installing libgomp-4.5.3-2.33 [ 165s] [23/143] installing libidn-1.15-7.29 [ 165s] [24/143] installing liblua-5.1.4-7.6 [ 165s] [25/143] installing libuuid-2.20.2-7.6 [ 166s] [26/143] installing lzo-2.03-2.18 [ 166s] [27/143] installing m4-1.4.14-1.8 [ 166s] [28/143] installing make-3.81-1.12 [ 166s] [29/143] installing net-tools-1.60-88.8 [ 166s] [30/143] installing nspr-4.8.7-1.17 [ 167s] [31/143] installing nss-softokn-freebl-3.12.9-3.28 [ 167s] [32/143] installing patch-2.6.1.169-1.8 [ 167s] [33/143] installing pkgconfig-0.25-3.11 [ 167s] [34/143] installing popt-1.16-4.11 [ 168s] [35/143] installing readline-5.2-14.7 [ 168s] [36/143] installing sed-4.1.5-3.7 [ 168s] [37/143] installing sqlite-3.7.13-1.12 [ 168s] [38/143] installing xz-libs-5.0.3-2.17 [ 168s] [39/143] installing zlib-1.2.5-3.18 [ 169s] [40/143] installing gmp-5.0.1-2.16 [ 169s] [41/143] installing libpcre-7.7-4.44 [ 169s] [42/143] installing ncurses-libs-5.7-4.11 [ 170s] [43/143] installing build-compare-2009.10.14-26.13 [ 170s] [44/143] installing qemu.x86_64-1.2-2.9 [ 174s] [45/143] installing eglibc-headers-2.13-2.18 [ 174s] [46/143] installing libcap-2.21-2.10 [ 174s] [47/143] installing unzip-6.0-10.16 [ 175s] [48/143] installing zlib-devel-1.2.5-3.18 [ 175s] [49/143] installing grep-2.5.1a-63.8 [ 175s] [50/143] installing libacl-2.2.49-3.12 [ 175s] [51/143] installing libfile-5.04-2.11 [ 176s] [52/143] installing lzo-minilzo-2.03-2.18 [ 177s] [53/143] installing mpfr-3.0.0-1.16 [ 177s] [54/143] installing ncurses-5.7-4.11 [ 177s] [55/143] installing binutils-2.22-1.12 [ 178s] [56/143] installing bzip2-1.0.5-5.12 [ 178s] [57/143] installing libblkid-2.20.2-7.6 [ 179s] [58/143] installing xz-5.0.3-2.17 [ 179s] [59/143] installing elfutils-libs-0.152-2.16 [ 179s] [60/143] installing nss-3.12.9-3.28 [ 180s] [61/143] installing perl-5.12.1-62.7 [ 206s] [62/143] installing ncurses-base-5.7-4.11 [ 206s] [63/143] installing perl-HTML-Tagset-3.20-8.2 [ 206s] [64/143] installing perl-IO-Compress-Base-2.008-62.7 [ 207s] [65/143] installing perl-Module-Pluggable-3.60-62.7 [ 207s] [66/143] installing perl-Pod-Escapes-1.04-62.7 [ 207s] [67/143] installing perl-TimeDate-1.20-1.2 [ 207s] [68/143] installing eglibc-devel-2.13-2.18 [ 207s] [69/143] installing lzo-devel-2.03-2.18 [ 208s] [70/143] installing perl-Compress-Raw-Zlib-2.008-62.7 [ 208s] [71/143] installing perl-devel-5.12.1-62.7 [ 209s] [72/143] installing perl-libs-5.12.1-62.7 [ 209s] [73/143] installing tar-1.17-5.10 [ 209s] [74/143] installing coreutils-6.9-9.12 [ 210s] [75/143] installing file-5.04-2.11 [ 210s] [76/143] installing libmount-2.20.2-7.6 [ 211s] [77/143] installing mpc-0.9-1.16 [ 211s] [78/143] installing openssl-1.0.1c-2.26 [ 211s] [79/143] installing xz-lzma-compat-5.0.3-2.17 [ 212s] [80/143] installing elfutils-0.152-2.16 [ 212s] [81/143] installing nss-sysinit-3.12.9-3.28 [ 212s] [82/143] installing perl-ExtUtils-ParseXS-2.18-62.7 [ 213s] [83/143] installing perl-Pod-Simple-3.07-62.7 [ 213s] [84/143] installing perl-Test-Simple-0.80-62.7 [ 213s] [85/143] installing tizen-accelerator-1.0.1-1.14 [ 214s] [86/143] installing perl-IO-Compress-Zlib-2.008-62.7 [ 215s] [87/143] installing perl-Test-Harness-3.12-62.7 [ 215s] [88/143] installing gawk-3.1.5-2.8 [ 215s] [89/143] installing gzip-1.3.14-3.7 [ 216s] [90/143] installing build-2011.01.10a-1.8 [ 216s] [91/143] installing libcurl-7.28.1-3.26 [ 216s] [92/143] installing cpp-4.5.3-2.33 [ 217s] [93/143] installing util-linux-2.20.2-7.6 [ 218s] warning: group tty does not exist - using root [ 218s] /bin/chown: `root:root': invalid user [ 218s] [94/143] installing bzip2-libs-x86-arm-1.0.5-9.7 [ 218s] [95/143] installing eglibc-x86-arm-2.13-9.7 [ 221s] [96/143] installing elfutils-libelf-x86-arm-0.152-9.7 [ 222s] [97/143] installing elfutils-libs-x86-arm-0.152-9.7 [ 222s] [98/143] installing gmp-x86-arm-5.0.1-9.7 [ 224s] [99/143] installing libacl-x86-arm-2.2.49-9.7 [ 225s] [100/143] installing libattr-x86-arm-2.4.44-9.7 [ 225s] [101/143] installing libcap-x86-arm-2.21-9.6 [ 227s] [102/143] installing libfile-x86-arm-5.04-9.7 [ 228s] [103/143] installing libgcc-x86-arm-4.5.3-9.7 [ 228s] [104/143] installing liblua-x86-arm-5.1.4-9.7 [ 229s] [105/143] installing mpc-x86-arm-0.9-9.7 [ 229s] [106/143] installing mpfr-x86-arm-3.0.0-9.7 [ 230s] [107/143] installing ncurses-libs-x86-arm-5.7-9.6 [ 230s] [108/143] installing nspr-x86-arm-4.8.7-9.7 [ 231s] [109/143] installing nss-softokn-freebl-x86-arm-3.12.9-9.7 [ 231s] [110/143] installing nss-x86-arm-3.12.9-9.7 [ 233s] [111/143] installing perl-ExtUtils-MakeMaker-6.36-62.7 [ 233s] [112/143] installing popt-x86-arm-1.16-9.7 [ 234s] [113/143] installing sqlite-x86-arm-3.7.13-9.6 [ 234s] [114/143] installing xz-libs-x86-arm-5.0.3-9.7 [ 234s] [115/143] installing zlib-x86-arm-1.2.5-7.6 [ 235s] [116/143] installing curl-7.28.1-3.26 [ 235s] [117/143] installing gcc-4.5.3-2.33 [ 236s] [118/143] installing perl-CPAN-1.9205-62.7 [ 236s] [119/143] installing bash-x86-arm-4.1-7.7 [ 236s] [120/143] installing fdupes-x86-arm-1.40-9.7 [ 237s] [121/143] installing findutils-x86-arm-4.2.31-7.7 [ 237s] [122/143] installing gawk-x86-arm-3.1.5-7.7 [ 238s] [123/143] installing gzip-x86-arm-1.3.14-9.7 [ 238s] [124/143] installing make-x86-arm-3.81-8.6 [ 238s] [125/143] installing patch-x86-arm-2.6.1.169-7.7 [ 239s] [126/143] installing sed-x86-arm-4.1.5-9.7 [ 239s] /bin/sed.orig-arm already present - skipping. [ 239s] [127/143] installing diffutils-x86-arm-3.0-9.7 [ 240s] /usr/bin/cmp.orig-arm already present - skipping. [ 240s] /usr/bin/diff.orig-arm already present - skipping. [ 240s] /usr/bin/diff3.orig-arm already present - skipping. [ 240s] /usr/bin/sdiff.orig-arm already present - skipping. [ 240s] [128/143] installing autoconf-2.68-1.9 [ 241s] [129/143] installing coreutils-x86-arm-6.9-7.7 [ 243s] [130/143] installing file-x86-arm-5.04-7.7 [ 243s] [131/143] installing tar-x86-arm-1.17-9.6 [ 243s] /bin/tar.orig-arm already present - skipping. [ 244s] [132/143] installing elfutils-x86-arm-0.152-7.8 [ 244s] [133/143] installing gcc-c++-4.5.3-2.33 [ 245s] [134/143] installing rpm-4.9.1-4.12 [ 245s] [135/143] installing automake-1.11.1-3.12 [ 245s] [136/143] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 249s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 249s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 249s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 249s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 249s] [137/143] installing rpm-libs-4.9.1-4.12 [ 249s] [138/143] installing rpm-libs-x86-arm-4.9.1-10.7 [ 249s] [139/143] installing libtool-2.2.6b-2.15 [ 249s] [140/143] installing cross-armv7l-binutils-accel-armv7l-2.22-1.6 [ 250s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 250s] [141/143] installing rpm-build-4.9.1-4.12 [ 250s] [142/143] installing rpm-x86-arm-4.9.1-9.7 [ 250s] /bin/rpm.orig-arm already present - skipping. [ 250s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 250s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 250s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 250s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 250s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 250s] [143/143] installing rpm-build-x86-arm-4.9.1-9.7 [ 250s] /usr/bin/rpmbuild [ 250s] /usr/lib/rpm/debugedit [ 250s] now finalizing build dir... [ 251s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 254s] build target is armv7l-tizen-linux [ 254s] ----------------------------------------------------------------- [ 254s] I have the following modifications for alsa-scenario-scn-data-0-base.spec: [ 254s] 5c5 [ 254s] < Release: 2 [ 254s] --- [ 254s] > Release: 5.2 [ 254s] ----------------------------------------------------------------- [ 254s] ----- building alsa-scenario-scn-data-0-base.spec (user abuild) [ 254s] ----------------------------------------------------------------- [ 254s] ----------------------------------------------------------------- [ 255s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w10.vlan200.tizendev.org/Tizen:2.2:Main/standard/e7bcf7ade408d411d333879ff44faf6e-alsa-scenario-scn-data-0-base' /home/abuild/rpmbuild/SOURCES/alsa-scenario-scn-data-0-base.spec [ 255s] Building target platforms: armv7l-tizen-linux [ 255s] Building for target armv7l-tizen-linux [ 255s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.jkHfT7 [ 255s] + umask 022 [ 255s] + cd /home/abuild/rpmbuild/BUILD [ 255s] + LANG=C [ 255s] + export LANG [ 255s] + unset DISPLAY [ 255s] + cd /home/abuild/rpmbuild/BUILD [ 255s] + rm -rf alsa-scenario-scn-data-0-base-0.1.0 [ 255s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/alsa-scenario-scn-data-0-base-0.1.0.tar.gz [ 255s] + /bin/tar -xf - [ 255s] + STATUS=0 [ 255s] + '[' 0 -ne 0 ']' [ 255s] + cd alsa-scenario-scn-data-0-base-0.1.0 [ 255s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 255s] + exit 0 [ 255s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ZLaMrj [ 255s] + umask 022 [ 255s] + cd /home/abuild/rpmbuild/BUILD [ 255s] + cd alsa-scenario-scn-data-0-base-0.1.0 [ 255s] + LANG=C [ 255s] + export LANG [ 255s] + unset DISPLAY [ 255s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 255s] + export CFLAGS [ 255s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 255s] + export CXXFLAGS [ 255s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 255s] + export FFLAGS [ 255s] + LD_AS_NEEDED=1 [ 255s] + export LD_AS_NEEDED [ 255s] + exit 0 [ 255s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.B0A60u [ 255s] + umask 022 [ 255s] + cd /home/abuild/rpmbuild/BUILD [ 255s] + cd alsa-scenario-scn-data-0-base-0.1.0 [ 255s] + LANG=C [ 255s] + export LANG [ 255s] + unset DISPLAY [ 255s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/alsa-scenario-scn-data-0-base-0.1.0-5.2.arm [ 255s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/alsa-scenario-scn-data-0-base-0.1.0-5.2.arm [ 255s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/alsa-scenario-scn-data-0-base-0.1.0-5.2.arm [ 255s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/alsa-scenario-scn-data-0-base-0.1.0-5.2.arm/usr/etc/sound [ 255s] + cp -a default /home/abuild/rpmbuild/BUILDROOT/alsa-scenario-scn-data-0-base-0.1.0-5.2.arm/usr/etc/sound [ 255s] + cp -a default.conf /home/abuild/rpmbuild/BUILDROOT/alsa-scenario-scn-data-0-base-0.1.0-5.2.arm/usr/etc/sound/default.conf [ 255s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/alsa-scenario-scn-data-0-base-0.1.0-5.2.arm/usr/share/license [ 255s] + cp LICENSE.LGPLv2.1 /home/abuild/rpmbuild/BUILDROOT/alsa-scenario-scn-data-0-base-0.1.0-5.2.arm/usr/share/license/alsa-scenario-scn-data-0-base [ 255s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/alsa-scenario-scn-data-0-base-0.1.0 [ 255s] + /usr/lib/rpm/check-buildroot [ 255s] + /usr/lib/rpm//brp-compress [ 255s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 255s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 255s] + /usr/lib/rpm/brp-python-bytecompile [ 255s] + /usr/lib/rpm/brp-python-hardlink [ 255s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/alsa-scenario-scn-data-0-base-0.1.0-5.2.arm [ 255s] Processing files: alsa-scenario-scn-data-0-base-0.1.0-5.2.noarch [ 255s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 255s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 255s] [ 255s] Requires(interp): /bin/sh [ 255s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 255s] Requires(post): /bin/sh [ 255s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/alsa-scenario-scn-data-0-base-0.1.0-5.2.arm [ 255s] Wrote: /home/abuild/rpmbuild/SRPMS/alsa-scenario-scn-data-0-base-0.1.0-5.2.src.rpm [ 255s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/alsa-scenario-scn-data-0-base-0.1.0-5.2.noarch.rpm [ 255s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.v365U6 [ 255s] + umask 022 [ 255s] + cd /home/abuild/rpmbuild/BUILD [ 255s] + cd alsa-scenario-scn-data-0-base-0.1.0 [ 255s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/alsa-scenario-scn-data-0-base-0.1.0-5.2.arm [ 255s] + exit 0 [ 255s] ... checking for files with abuild user/group [ 255s] ... creating baselibs [ 256s] ... comparing built packages with the former built [ 256s] /usr/lib/build/rpm-check.sh [ 256s] compare /.build.oldpackages/alsa-scenario-scn-data-0-base-0.1.0-5.1.src.rpm /home/abuild/rpmbuild/SRPMS/alsa-scenario-scn-data-0-base-0.1.0-5.2.src.rpm [ 256s] compare /.build.oldpackages/alsa-scenario-scn-data-0-base-0.1.0-5.1.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/alsa-scenario-scn-data-0-base-0.1.0-5.2.noarch.rpm [ 256s] --- /tmp/tmp.ZMjbvRIvgl 2013-11-07 08:32:15.358019594 +0000 [ 256s] +++ /tmp/tmp.T3kIdoHrcb 2013-11-07 08:32:15.370019594 +0000 [ 256s] @@ -1,7 +1,7 @@ [ 256s] alsa-scenario-scn-data-0-base 0.1.0 (none) [ 256s] Empty alsa scenario data [ 256s] Empty Alsa scenario data [ 256s] - tizen Tizen:2.2:Main obs://w08.vlan200.tizendev.org/Tizen:2.2:Main/standard/e7bcf7ade408d411d333879ff44faf6e-alsa-scenario-scn-data-0-base LGPLv2.1 LGPLv2.1 [ 256s] + tizen Tizen:2.2:Main obs://w10.vlan200.tizendev.org/Tizen:2.2:Main/standard/e7bcf7ade408d411d333879ff44faf6e-alsa-scenario-scn-data-0-base LGPLv2.1 LGPLv2.1 [ 256s] TO_BE/FILLED_IN (none) (none) (none) (none) [ 256s] (none) 4.9.1 noarch-tizen-linux-gnueabi [ 256s] cpio gzip 9 [ 256s] RPM meta information is different [ 256s] ... saving built statistics [ 256s] ... saving built packages [ 257s] /home/abuild/rpmbuild/RPMS/noarch/alsa-scenario-scn-data-0-base-0.1.0-5.2.noarch.rpm [ 257s] /home/abuild/rpmbuild/SRPMS/alsa-scenario-scn-data-0-base-0.1.0-5.2.src.rpm [ 257s] /home/abuild/rpmbuild/OTHER/_statistics [ 257s] [ 257s] w10 finished "build alsa-scenario-scn-data-0-base.spec" at Thu Nov 7 08:32:15 UTC 2013. [ 257s] [ 263s] [ 238.474449] SysRq : Power Off [ 263s] [ 238.581805] Power down. [ 264s] build: extracting built packages... [ 265s] alsa-scenario-scn-data-0-base-0.1.0-5.2.noarch.rpm [ 265s] alsa-scenario-scn-data-0-base-0.1.0-5.2.src.rpm [ 265s] _statistics