[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w12 started "build libICE.spec" at Thu Nov 7 08:36:39 UTC 2013. [ 0s] [ 0s] Building libICE for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '343f7281df629a638c7f2c128dc47178' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/libICE.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/libICE.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/libICE.spec build rpmlint-Factory ... [ 0s] hostname: Name or service not known [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm -> rpm-libs [ 0s] [1/56] preinstalling libgcc... [ 0s] [2/56] preinstalling setup... [ 0s] [3/56] preinstalling filesystem... [ 0s] [4/56] preinstalling eglibc... [ 0s] [5/56] preinstalling eglibc-common... [ 0s] [6/56] preinstalling bash... [ 0s] [7/56] preinstalling bzip2-libs... [ 0s] [8/56] preinstalling diffutils... [ 0s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 1s] [23/56] preinstalling libcap... [ 1s] [24/56] preinstalling libacl... [ 1s] [25/56] preinstalling libfile... [ 1s] [26/56] preinstalling bzip2... [ 1s] [27/56] preinstalling nss... [ 1s] [28/56] preinstalling tar... [ 1s] [29/56] preinstalling coreutils... [ 1s] [30/56] preinstalling file... [ 1s] [31/56] preinstalling rpm... [ 1s] [32/56] preinstalling tizen-accelerator... [ 1s] [33/56] preinstalling rpm-libs... [ 1s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 2s] [50/56] preinstalling popt-x86-arm... [ 2s] [51/56] preinstalling rpm-libs-x86-arm... [ 2s] [52/56] preinstalling sqlite-x86-arm... [ 2s] [53/56] preinstalling xz-libs-x86-arm... [ 2s] [54/56] preinstalling zlib-x86-arm... [ 2s] [55/56] preinstalling bash-x86-arm... [ 2s] [56/56] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm -> rpm-libs [ 3s] done [ 15s] booting kvm ... [ 15s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 4 [ 20s] [ 0.000000] tsc: Fast TSC calibration failed [ 21s] doing fast boot [ 21s] Creating device nodes with udev [ 25s] Waiting for device /dev/vda to appear: ok [ 25s] fsck from util-linux 2.21.2 [ 25s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 26s] /dev/vda: clean, 6823/2097152 files, 238864/8388608 blocks [ 26s] fsck succeeded. Mounting root device read-write. [ 26s] Mounting root /dev/vda [ 26s] mount -o rw -t ext4 /dev/vda /root [ 29s] replacing /etc/mtab with symlink to /proc/self/mounts [ 29s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 38s] 2nd stage started in virtual machine [ 38s] machine type: armv7l [ 38s] switching personality to 8... [ 38s] 2nd stage started in virtual machine [ 38s] machine type: armv7l [ 39s] swapon on /dev/vdb [ 39s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 39s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 41s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 42s] logging output to //.build.log... [ 43s] processing specfile /.build-srcdir/libICE.spec ... [ 45s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/libICE.spec build rpmlint-Factory ... [ 63s] running rpm-x86-arm postinstall script [ 64s] /bin/rpm [ 64s] /usr/bin/rpm2cpio [ 64s] /usr/bin/rpmdb [ 64s] /usr/bin/rpmquery [ 64s] /usr/bin/rpmsign [ 64s] /usr/bin/rpmverify [ 64s] running rpm-libs-x86-arm postinstall script [ 64s] running tizen-accelerator postinstall script [ 64s] running bash-x86-arm postinstall script [ 65s] initializing rpm db... [ 69s] [1/146] installing kernel-headers-3.0.15-1.10 [ 70s] [2/146] installing tizen-release-2.2.0-1.9 [ 70s] [3/146] installing tzdata-2011h-1.10 [ 71s] [4/146] installing libgcc-4.5.3-2.33 [ 72s] [5/146] installing setup-0.1-2.5 [ 75s] [6/146] installing filesystem-0.1-1.9 [ 84s] warning: group lock does not exist - using root [ 84s] warning: group mail does not exist - using root [ 85s] [7/146] installing eglibc-2.13-2.18 [ 86s] [8/146] installing libstdc++-4.5.3-2.33 [ 86s] [9/146] installing eglibc-common-2.13-2.18 [ 95s] /var/tmp/rpm-tmp.6flEg0: line 2: /usr/bin/xargs: No such file or directory [ 95s] [10/146] installing libstdc++-devel-4.5.3-2.33 [ 95s] [11/146] installing bash-4.1-4.8 [ 96s] [12/146] installing bzip2-libs-1.0.5-5.12 [ 96s] [13/146] installing c-ares-1.7.4-3.22 [ 96s] [14/146] installing cpio-2.8-4.8 [ 97s] [15/146] installing diffutils-3.0-4.8 [ 99s] [16/146] installing e2fsprogs-libs-1.41.9-3.7 [ 99s] [17/146] installing elfutils-libelf-0.152-2.16 [ 99s] [18/146] installing fdupes-1.40-42.10 [ 100s] [19/146] installing findutils-4.2.31-2.8 [ 100s] [20/146] installing gdbm-1.8.3-2.33 [ 100s] [21/146] installing libattr-2.4.44-8.12 [ 100s] [22/146] installing libgomp-4.5.3-2.33 [ 100s] [23/146] installing libidn-1.15-7.29 [ 100s] [24/146] installing liblua-5.1.4-7.7 [ 100s] [25/146] installing libuuid-2.20.2-7.6 [ 101s] [26/146] installing lzo-2.03-2.18 [ 101s] [27/146] installing m4-1.4.14-1.9 [ 101s] [28/146] installing make-3.81-1.12 [ 101s] [29/146] installing net-tools-1.60-88.9 [ 101s] [30/146] installing nspr-4.8.7-1.17 [ 101s] [31/146] installing nss-softokn-freebl-3.12.9-3.28 [ 101s] [32/146] installing patch-2.6.1.169-1.9 [ 101s] [33/146] installing pkgconfig-0.25-3.11 [ 101s] [34/146] installing popt-1.16-4.11 [ 102s] [35/146] installing readline-5.2-14.7 [ 102s] [36/146] installing sed-4.1.5-3.8 [ 102s] [37/146] installing sqlite-3.7.13-1.12 [ 102s] [38/146] installing xz-libs-5.0.3-2.17 [ 103s] [39/146] installing zlib-1.2.5-3.18 [ 103s] [40/146] installing gmp-5.0.1-2.16 [ 104s] [41/146] installing libpcre-7.7-4.44 [ 104s] [42/146] installing ncurses-libs-5.7-4.11 [ 104s] [43/146] installing build-compare-2009.10.14-26.14 [ 104s] [44/146] installing qemu.x86_64-1.2-2.10 [ 108s] [45/146] installing xorg-x11-proto-core-7.0.25-2.8 [ 109s] [46/146] installing xorg-x11-xtrans-devel-1.2.7-2.9 [ 109s] [47/146] installing xorg-x11-xutils-dev-7.7-1.10 [ 109s] [48/146] installing eglibc-headers-2.13-2.18 [ 110s] [49/146] installing libcap-2.21-2.10 [ 110s] [50/146] installing unzip-6.0-10.16 [ 110s] [51/146] installing zlib-devel-1.2.5-3.18 [ 111s] [52/146] installing grep-2.5.1a-63.9 [ 111s] [53/146] installing libacl-2.2.49-3.12 [ 111s] [54/146] installing libfile-5.04-2.11 [ 112s] [55/146] installing lzo-minilzo-2.03-2.18 [ 112s] [56/146] installing mpfr-3.0.0-1.16 [ 112s] [57/146] installing ncurses-5.7-4.11 [ 113s] [58/146] installing binutils-2.22-1.12 [ 114s] [59/146] installing bzip2-1.0.5-5.12 [ 115s] [60/146] installing libblkid-2.20.2-7.6 [ 115s] [61/146] installing xz-5.0.3-2.17 [ 115s] [62/146] installing elfutils-libs-0.152-2.16 [ 115s] [63/146] installing nss-3.12.9-3.28 [ 117s] [64/146] installing perl-5.12.1-62.7 [ 127s] [65/146] installing ncurses-base-5.7-4.11 [ 127s] [66/146] installing perl-HTML-Tagset-3.20-8.2 [ 127s] [67/146] installing perl-IO-Compress-Base-2.008-62.7 [ 128s] [68/146] installing perl-Module-Pluggable-3.60-62.7 [ 128s] [69/146] installing perl-Pod-Escapes-1.04-62.7 [ 128s] [70/146] installing perl-TimeDate-1.20-1.2 [ 128s] [71/146] installing eglibc-devel-2.13-2.18 [ 128s] [72/146] installing lzo-devel-2.03-2.18 [ 128s] [73/146] installing perl-Compress-Raw-Zlib-2.008-62.7 [ 128s] [74/146] installing perl-devel-5.12.1-62.7 [ 129s] [75/146] installing perl-libs-5.12.1-62.7 [ 129s] [76/146] installing tar-1.17-5.11 [ 130s] [77/146] installing coreutils-6.9-9.12 [ 131s] [78/146] installing file-5.04-2.11 [ 131s] [79/146] installing libmount-2.20.2-7.6 [ 132s] [80/146] installing mpc-0.9-1.16 [ 132s] [81/146] installing openssl-1.0.1c-2.26 [ 132s] [82/146] installing xz-lzma-compat-5.0.3-2.17 [ 132s] [83/146] installing elfutils-0.152-2.16 [ 133s] [84/146] installing nss-sysinit-3.12.9-3.28 [ 133s] [85/146] installing perl-ExtUtils-ParseXS-2.18-62.7 [ 133s] [86/146] installing perl-Pod-Simple-3.07-62.7 [ 133s] [87/146] installing perl-Test-Simple-0.80-62.7 [ 133s] [88/146] installing tizen-accelerator-1.0.1-1.14 [ 134s] [89/146] installing perl-IO-Compress-Zlib-2.008-62.7 [ 134s] [90/146] installing perl-Test-Harness-3.12-62.7 [ 135s] [91/146] installing gawk-3.1.5-2.8 [ 135s] [92/146] installing gzip-1.3.14-3.8 [ 135s] [93/146] installing build-2011.01.10a-1.9 [ 136s] [94/146] installing libcurl-7.28.1-3.26 [ 136s] [95/146] installing cpp-4.5.3-2.33 [ 136s] [96/146] installing util-linux-2.20.2-7.6 [ 137s] warning: group tty does not exist - using root [ 137s] /bin/chown: `root:root': invalid user [ 137s] [97/146] installing bzip2-libs-x86-arm-1.0.5-9.7 [ 137s] [98/146] installing eglibc-x86-arm-2.13-9.7 [ 138s] [99/146] installing elfutils-libelf-x86-arm-0.152-9.7 [ 138s] [100/146] installing elfutils-libs-x86-arm-0.152-9.7 [ 138s] [101/146] installing gmp-x86-arm-5.0.1-9.7 [ 138s] [102/146] installing libacl-x86-arm-2.2.49-9.7 [ 139s] [103/146] installing libattr-x86-arm-2.4.44-9.7 [ 139s] [104/146] installing libcap-x86-arm-2.21-9.6 [ 139s] [105/146] installing libfile-x86-arm-5.04-9.7 [ 139s] [106/146] installing libgcc-x86-arm-4.5.3-9.7 [ 140s] [107/146] installing liblua-x86-arm-5.1.4-9.7 [ 140s] [108/146] installing mpc-x86-arm-0.9-9.7 [ 140s] [109/146] installing mpfr-x86-arm-3.0.0-9.7 [ 140s] [110/146] installing ncurses-libs-x86-arm-5.7-9.6 [ 140s] [111/146] installing nspr-x86-arm-4.8.7-9.7 [ 141s] [112/146] installing nss-softokn-freebl-x86-arm-3.12.9-9.7 [ 141s] [113/146] installing nss-x86-arm-3.12.9-9.7 [ 141s] [114/146] installing perl-ExtUtils-MakeMaker-6.36-62.7 [ 141s] [115/146] installing popt-x86-arm-1.16-9.7 [ 141s] [116/146] installing sqlite-x86-arm-3.7.13-9.6 [ 141s] [117/146] installing xz-libs-x86-arm-5.0.3-9.7 [ 142s] [118/146] installing zlib-x86-arm-1.2.5-7.6 [ 142s] [119/146] installing curl-7.28.1-3.26 [ 142s] [120/146] installing gcc-4.5.3-2.33 [ 142s] [121/146] installing perl-CPAN-1.9205-62.7 [ 142s] [122/146] installing bash-x86-arm-4.1-7.7 [ 142s] [123/146] installing fdupes-x86-arm-1.40-9.7 [ 143s] [124/146] installing findutils-x86-arm-4.2.31-7.7 [ 143s] [125/146] installing gawk-x86-arm-3.1.5-7.7 [ 143s] [126/146] installing gzip-x86-arm-1.3.14-9.7 [ 143s] [127/146] installing make-x86-arm-3.81-8.6 [ 143s] [128/146] installing patch-x86-arm-2.6.1.169-7.7 [ 144s] [129/146] installing sed-x86-arm-4.1.5-9.7 [ 144s] /bin/sed.orig-arm already present - skipping. [ 144s] [130/146] installing diffutils-x86-arm-3.0-9.7 [ 144s] /usr/bin/cmp.orig-arm already present - skipping. [ 144s] /usr/bin/diff.orig-arm already present - skipping. [ 144s] /usr/bin/diff3.orig-arm already present - skipping. [ 144s] /usr/bin/sdiff.orig-arm already present - skipping. [ 144s] [131/146] installing autoconf-2.68-1.9 [ 144s] [132/146] installing coreutils-x86-arm-6.9-7.7 [ 146s] [133/146] installing file-x86-arm-5.04-7.7 [ 147s] [134/146] installing tar-x86-arm-1.17-9.6 [ 147s] /bin/tar.orig-arm already present - skipping. [ 147s] [135/146] installing elfutils-x86-arm-0.152-7.8 [ 147s] [136/146] installing gcc-c++-4.5.3-2.33 [ 147s] [137/146] installing rpm-4.9.1-4.12 [ 147s] [138/146] installing automake-1.11.1-3.12 [ 148s] [139/146] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 149s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 149s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 149s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 149s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 149s] [140/146] installing rpm-libs-4.9.1-4.12 [ 149s] [141/146] installing rpm-libs-x86-arm-4.9.1-10.7 [ 149s] [142/146] installing libtool-2.2.6b-2.15 [ 149s] [143/146] installing cross-armv7l-binutils-accel-armv7l-2.22-1.6 [ 150s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 150s] [144/146] installing rpm-build-4.9.1-4.12 [ 150s] [145/146] installing rpm-x86-arm-4.9.1-9.7 [ 150s] /bin/rpm.orig-arm already present - skipping. [ 150s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 150s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 150s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 150s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 150s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 150s] [146/146] installing rpm-build-x86-arm-4.9.1-9.7 [ 150s] /usr/bin/rpmbuild [ 150s] /usr/lib/rpm/debugedit [ 150s] now finalizing build dir... [ 151s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 154s] build target is armv7l-tizen-linux [ 154s] ----------------------------------------------------------------- [ 154s] I have the following modifications for libICE.spec: [ 154s] 4c4 [ 154s] < Release: 1 [ 154s] --- [ 154s] > Release: 1.8 [ 154s] ----------------------------------------------------------------- [ 154s] ----- building libICE.spec (user abuild) [ 154s] ----------------------------------------------------------------- [ 154s] ----------------------------------------------------------------- [ 154s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w12.vlan200.tizendev.org/Tizen:2.2:Main/standard/343f7281df629a638c7f2c128dc47178-libICE' /home/abuild/rpmbuild/SOURCES/libICE.spec [ 154s] Building target platforms: armv7l-tizen-linux [ 154s] Building for target armv7l-tizen-linux [ 154s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.p57DiE [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + LANG=C [ 154s] + export LANG [ 154s] + unset DISPLAY [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + rm -rf libICE-1.0.8 [ 154s] + /bin/tar -xf - [ 154s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libICE-1.0.8.tar.gz [ 154s] + STATUS=0 [ 154s] + '[' 0 -ne 0 ']' [ 154s] + cd libICE-1.0.8 [ 154s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 154s] + exit 0 [ 154s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.aGfAr6 [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + cd libICE-1.0.8 [ 154s] + LANG=C [ 154s] + export LANG [ 154s] + unset DISPLAY [ 154s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 154s] + export CFLAGS [ 154s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 154s] + export CXXFLAGS [ 154s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 154s] + export FFLAGS [ 154s] + LD_AS_NEEDED=1 [ 154s] + export LD_AS_NEEDED [ 154s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 154s] + export CFLAGS [ 154s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 154s] + export CXXFLAGS [ 154s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 154s] + export FFLAGS [ 154s] + autoreconf -v --install --force [ 158s] autoreconf: Entering directory `.' [ 158s] autoreconf: configure.ac: not using Gettext [ 159s] autoreconf: running: aclocal --force [ 178s] autoreconf: configure.ac: tracing [ 186s] autoreconf: running: libtoolize --copy --force [ 186s] libtoolize: putting auxiliary files in `.'. [ 186s] libtoolize: copying file `./ltmain.sh' [ 186s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 186s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 186s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 200s] autoreconf: running: /usr/bin/autoconf --force [ 213s] autoreconf: running: /usr/bin/autoheader --force [ 221s] autoreconf: running: automake --add-missing --copy --force-missing [ 225s] configure.ac:19: installing `./config.guess' [ 225s] configure.ac:19: installing `./config.sub' [ 225s] configure.ac:15: installing `./install-sh' [ 225s] configure.ac:15: installing `./missing' [ 227s] src/Makefile.am: installing `./depcomp' [ 228s] autoreconf: Leaving directory `.' [ 228s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static 'LDFLAGS= -Wl,--hash-style=both -Wl,--as-needed' [ 228s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 228s] checking for gcc... gcc [ 228s] checking whether the C compiler works... yes [ 228s] checking for C compiler default output file name... a.out [ 228s] checking for suffix of executables... [ 229s] checking whether we are cross compiling... no [ 229s] checking for suffix of object files... o [ 229s] checking whether we are using the GNU C compiler... yes [ 229s] checking whether gcc accepts -g... yes [ 229s] checking for gcc option to accept ISO C89... none needed [ 229s] checking how to run the C preprocessor... gcc -E [ 229s] checking for grep that handles long lines and -e... /bin/grep [ 229s] checking for egrep... /bin/grep -E [ 229s] checking for ANSI C header files... yes [ 229s] checking for sys/types.h... yes [ 229s] checking for sys/stat.h... yes [ 229s] checking for stdlib.h... yes [ 229s] checking for string.h... yes [ 229s] checking for memory.h... yes [ 229s] checking for strings.h... yes [ 229s] checking for inttypes.h... yes [ 229s] checking for stdint.h... yes [ 229s] checking for unistd.h... yes [ 229s] checking minix/config.h usability... no [ 229s] checking minix/config.h presence... no [ 229s] checking for minix/config.h... no [ 229s] checking whether it is safe to define __EXTENSIONS__... yes [ 229s] checking for a BSD-compatible install... /usr/bin/install -c [ 230s] checking whether build environment is sane... yes [ 230s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 230s] checking for gawk... gawk [ 230s] checking whether make sets $(MAKE)... yes [ 230s] checking for style of include used by make... GNU [ 230s] checking dependency style of gcc... gcc3 [ 230s] checking whether to enable maintainer-specific portions of Makefiles... no [ 230s] checking build system type... armv7l-unknown-linux-gnueabi [ 230s] checking host system type... armv7l-unknown-linux-gnueabi [ 230s] checking for a sed that does not truncate output... /bin/sed [ 230s] checking for fgrep... /bin/grep -F [ 230s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 230s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 230s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 231s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 231s] checking whether ln -s works... yes [ 231s] checking the maximum length of command line arguments... 1572864 [ 231s] checking whether the shell understands some XSI constructs... yes [ 231s] checking whether the shell understands "+="... yes [ 231s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 231s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 231s] checking for objdump... objdump [ 231s] checking how to recognize dependent libraries... pass_all [ 231s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 231s] checking for ar... ar [ 231s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 231s] checking for strip... strip [ 231s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 231s] checking for ranlib... ranlib [ 231s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 231s] checking for dlfcn.h... yes [ 231s] checking for objdir... .libs [ 231s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 231s] checking for gcc option to produce PIC... -fPIC -DPIC [ 231s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 231s] checking if gcc static flag -static works... no [ 231s] checking if gcc supports -c -o file.o... yes [ 231s] checking if gcc supports -c -o file.o... (cached) yes [ 231s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 231s] checking whether -lc should be explicitly linked in... no [ 231s] checking dynamic linker characteristics... GNU/Linux ld.so [ 231s] checking how to hardcode library paths into programs... immediate [ 231s] checking whether stripping libraries is possible... yes [ 231s] checking if libtool supports shared libraries... yes [ 231s] checking whether to build shared libraries... yes [ 231s] checking whether to build static libraries... no [ 231s] checking for gcc option to accept ISO C99... -std=gnu99 [ 231s] checking whether __clang__ is declared... no [ 231s] checking whether __INTEL_COMPILER is declared... no [ 231s] checking whether __SUNPRO_C is declared... no [ 231s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 231s] checking for pkg-config... /usr/bin/pkg-config [ 231s] checking pkg-config is at least version 0.9.0... yes [ 231s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 231s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 231s] checking if gcc -std=gnu99 supports-Wall... yes [ 231s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 231s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 231s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 231s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 231s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 231s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 231s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 232s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 232s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 232s] checking if gcc -std=gnu99 supports-Wunused... yes [ 232s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 232s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 232s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 232s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 232s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 232s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 232s] checking if gcc -std=gnu99 supports-pedantic... yes [ 232s] checking if gcc -std=gnu99 supports-Werror... yes [ 232s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 232s] checking whether to build documentation... yes [ 232s] checking whether to build functional specifications... yes [ 232s] checking for xmlto... no [ 232s] configure: WARNING: xmlto not found - documentation targets will be skipped [ 232s] checking for fop... no [ 232s] configure: WARNING: fop not found - documentation targets will be skipped [ 232s] checking for xsltproc... no [ 232s] configure: WARNING: xsltproc not found - cannot transform XML documents [ 232s] checking for X.Org SGML entities >= 1.8... no [ 232s] checking for ICE... yes [ 232s] checking return type of signal handlers... void [ 232s] checking if Xtrans should support UNIX socket connections... yes [ 232s] checking if Xtrans should support TCP socket connections... yes [ 232s] checking for library containing socket... none required [ 232s] checking for library containing gethostbyname... none required [ 232s] checking for getaddrinfo... yes [ 232s] checking if IPv6 support should be built... yes [ 232s] checking for struct sockaddr_in.sin_len... no [ 232s] checking for socklen_t... yes [ 232s] checking if Xtrans should support os-specific local connections... no [ 232s] checking for asprintf... yes [ 233s] configure: creating ./config.status [ 233s] config.status: creating Makefile [ 233s] config.status: creating doc/Makefile [ 233s] config.status: creating specs/Makefile [ 233s] config.status: creating src/Makefile [ 233s] config.status: creating ice.pc [ 233s] config.status: creating config.h [ 233s] config.status: executing depfiles commands [ 233s] config.status: executing libtool commands [ 233s] + make -j4 [ 233s] make all-recursive [ 233s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8' [ 233s] Making all in doc [ 233s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/doc' [ 233s] make[2]: Nothing to be done for `all'. [ 233s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/doc' [ 233s] Making all in specs [ 233s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/specs' [ 233s] make[2]: Nothing to be done for `all'. [ 233s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/specs' [ 233s] Making all in src [ 233s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/src' [ 233s] CC accept.lo [ 233s] CC authutil.lo [ 233s] CC error.lo [ 233s] CC connect.lo [ 233s] connect.c: In function 'IceOpenConnection': [ 233s] connect.c:106:11: warning: declaration of 'iceConn' shadows a previous local [ 233s] error.c: In function '_IceDefaultIOErrorHandler': [ 233s] error.c:595:1: warning: function might be possible candidate for attribute 'noreturn' [ 233s] connect.c:52:15: warning: shadowed declaration is here [ 233s] CC getauth.lo [ 233s] CC iceauth.lo [ 233s] CC icetrans.lo [ 233s] CC listen.lo [ 233s] CC listenwk.lo [ 233s] CC locking.lo [ 233s] CC misc.lo [ 233s] CC ping.lo [ 233s] CC process.lo [ 233s] process.c: In function 'ProcessError': [ 233s] process.c:718:23: warning: initialization discards qualifiers from pointer target type [ 233s] process.c: In function 'ProcessAuthReply': [ 233s] process.c:1471:13: warning: declaration of 'status' shadows a previous local [ 233s] process.c:1418:18: warning: shadowed declaration is here [ 233s] process.c: In function 'ProcessConnectionReply': [ 233s] process.c:1799:32: warning: assignment discards qualifiers from pointer target type [ 233s] process.c: In function 'ProcessProtocolSetup': [ 233s] process.c:2020:2: warning: new qualifiers in middle of multi-level non-const cast are unsafe [ 233s] process.c: In function 'ProcessProtocolReply': [ 233s] process.c:2303:32: warning: assignment discards qualifiers from pointer target type [ 233s] CC protosetup.lo [ 233s] CC register.lo [ 233s] protosetup.c: In function 'IceProtocolSetup': [ 233s] protosetup.c:121:6: warning: new qualifiers in middle of multi-level non-const cast are unsafe [ 234s] CC replywait.lo [ 234s] CC setauth.lo [ 234s] CC shutdown.lo [ 234s] CC watch.lo [ 234s] CCLD libICE.la [ 234s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/src' [ 234s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8' [ 234s] make[2]: Nothing to be done for `all-am'. [ 234s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8' [ 234s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8' [ 234s] + exit 0 [ 234s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.5QufUq [ 234s] + umask 022 [ 234s] + cd /home/abuild/rpmbuild/BUILD [ 234s] + cd libICE-1.0.8 [ 234s] + LANG=C [ 234s] + export LANG [ 234s] + unset DISPLAY [ 234s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm [ 234s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm [ 234s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm [ 234s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/license [ 234s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/license/libICE [ 234s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm [ 234s] Making install in doc [ 234s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/doc' [ 234s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/doc' [ 234s] make[2]: Nothing to be done for `install-exec-am'. [ 234s] test -z "/usr/share/doc/libICE" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/doc/libICE" [ 234s] /usr/bin/install -c -m 644 ICElib.xml '/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/doc/libICE' [ 234s] test -z "/usr/share/doc/libICE" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/doc/libICE" [ 234s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/doc' [ 234s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/doc' [ 234s] Making install in specs [ 234s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/specs' [ 234s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/specs' [ 234s] make[2]: Nothing to be done for `install-exec-am'. [ 234s] test -z "/usr/share/doc/libICE" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/doc/libICE" [ 234s] /usr/bin/install -c -m 644 ice.xml '/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/doc/libICE' [ 234s] test -z "/usr/share/doc/libICE" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/doc/libICE" [ 234s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/specs' [ 234s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/specs' [ 234s] Making install in src [ 234s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/src' [ 234s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/src' [ 234s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/lib" [ 234s] /bin/sh ../libtool --mode=install /usr/bin/install -c libICE.la '/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/lib' [ 234s] libtool: install: /usr/bin/install -c .libs/libICE.so.6.3.0 /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/lib/libICE.so.6.3.0 [ 234s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/lib && { ln -s -f libICE.so.6.3.0 libICE.so.6 || { rm -f libICE.so.6 && ln -s libICE.so.6.3.0 libICE.so.6; }; }) [ 234s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/lib && { ln -s -f libICE.so.6.3.0 libICE.so || { rm -f libICE.so && ln -s libICE.so.6.3.0 libICE.so; }; }) [ 234s] libtool: install: /usr/bin/install -c .libs/libICE.lai /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/lib/libICE.la [ 234s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 234s] test -z "/usr/include/X11/ICE" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/include/X11/ICE" [ 234s] /usr/bin/install -c -m 644 ../include/X11/ICE/ICE.h ../include/X11/ICE/ICEconn.h ../include/X11/ICE/ICElib.h ../include/X11/ICE/ICEmsg.h ../include/X11/ICE/ICEproto.h ../include/X11/ICE/ICEutil.h '/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/include/X11/ICE' [ 234s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/src' [ 234s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8/src' [ 234s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8' [ 234s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8' [ 234s] make[2]: Nothing to be done for `install-exec-am'. [ 234s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/lib/pkgconfig" [ 234s] /usr/bin/install -c -m 644 ice.pc '/home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/lib/pkgconfig' [ 234s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8' [ 234s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libICE-1.0.8' [ 234s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/lib/libICE.la [ 234s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/info [ 234s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/doc [ 234s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/doc/libICE [ 234s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/gtk-doc [ 234s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/share/man [ 234s] + find /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm -regex '.*/man/man./.*.[0-9]' [ 234s] + xargs rm -f -- [ 234s] + find /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm -regex '.*/man/../man./.*.[0-9]' [ 234s] + xargs rm -f -- [ 234s] + find /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm -regex '.*/man/man./.*.[0-9]pm' [ 234s] + xargs rm -f -- [ 234s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libICE-1.0.8 [ 234s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm/usr/lib/libICE.so.6.3.0 [ 234s] symlinked /usr/lib/debug/usr/lib/libICE.so.6.3.0.debug to /usr/lib/debug/usr/lib/libICE.so.debug [ 235s] symlinked /usr/lib/debug/usr/lib/libICE.so.6.3.0.debug to /usr/lib/debug/usr/lib/libICE.so.6.debug [ 235s] 416 blocks [ 235s] + /usr/lib/rpm/check-buildroot [ 235s] + /usr/lib/rpm//brp-compress [ 235s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 235s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 235s] + /usr/lib/rpm/brp-python-bytecompile [ 235s] + /usr/lib/rpm/brp-python-hardlink [ 235s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm [ 235s] Processing files: libICE-1.0.8-1.8.armv7l [ 235s] Provides: libICE.so.6 [ 235s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 235s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 235s] Requires(post): /sbin/ldconfig [ 235s] Requires(postun): /sbin/ldconfig [ 235s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 235s] Processing files: libICE-devel-1.0.8-1.8.armv7l [ 235s] Provides: pkgconfig(ice) = 1.0.8 [ 235s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 235s] Requires: /usr/bin/pkg-config libICE.so.6 pkgconfig(xproto) [ 235s] Processing files: libICE-debuginfo-1.0.8-1.8.armv7l [ 235s] Processing files: libICE-debugsource-1.0.8-1.8.armv7l [ 235s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm [ 235s] Wrote: /home/abuild/rpmbuild/SRPMS/libICE-1.0.8-1.8.src.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libICE-1.0.8-1.8.armv7l.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libICE-devel-1.0.8-1.8.armv7l.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libICE-debuginfo-1.0.8-1.8.armv7l.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libICE-debugsource-1.0.8-1.8.armv7l.rpm [ 235s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.psAYRL [ 235s] + umask 022 [ 235s] + cd /home/abuild/rpmbuild/BUILD [ 235s] + cd libICE-1.0.8 [ 235s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm [ 235s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libICE-1.0.8-1.8.arm [ 235s] + exit 0 [ 235s] ... checking for files with abuild user/group [ 235s] ... creating baselibs [ 236s] ... comparing built packages with the former built [ 236s] /usr/lib/build/rpm-check.sh [ 236s] compare /.build.oldpackages/libICE-1.0.8-1.7.src.rpm /home/abuild/rpmbuild/SRPMS/libICE-1.0.8-1.8.src.rpm [ 236s] compare /.build.oldpackages/libICE-1.0.8-1.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libICE-1.0.8-1.8.armv7l.rpm [ 236s] --- /tmp/tmp.cyW1bF3ZHy 2013-11-07 08:40:35.270118388 +0000 [ 236s] +++ /tmp/tmp.uZjA7kYxWs 2013-11-07 08:40:35.282118388 +0000 [ 236s] @@ -1,7 +1,7 @@ [ 236s] libICE 1.0.8 (none) [ 236s] X.Org X11 ICE runtime library [ 236s] The X.Org X11 ICE (Inter-Client Exchange) runtime library. [ 236s] - tizen Tizen:2.2:Main obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/343f7281df629a638c7f2c128dc47178-libICE MIT MIT [ 236s] + tizen Tizen:2.2:Main obs://w12.vlan200.tizendev.org/Tizen:2.2:Main/standard/343f7281df629a638c7f2c128dc47178-libICE MIT MIT [ 236s] System Environment/Libraries http://www.x.org (none) (none) (none) [ 236s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 236s] cpio gzip 9 [ 236s] RPM meta information is different [ 236s] compare /.build.oldpackages/libICE-debuginfo-1.0.8-1.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libICE-debuginfo-1.0.8-1.8.armv7l.rpm [ 236s] --- /tmp/tmp.YDogH7qQ4J 2013-11-07 08:40:35.334118388 +0000 [ 236s] +++ /tmp/tmp.1akCPCqUox 2013-11-07 08:40:35.350118388 +0000 [ 236s] @@ -3,7 +3,7 @@ [ 236s] This package provides debug information for package libICE. [ 236s] Debug information is useful when developing applications that use this [ 236s] package or when debugging this package. [ 236s] - tizen Tizen:2.2:Main obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/343f7281df629a638c7f2c128dc47178-libICE MIT MIT [ 236s] + tizen Tizen:2.2:Main obs://w12.vlan200.tizendev.org/Tizen:2.2:Main/standard/343f7281df629a638c7f2c128dc47178-libICE MIT MIT [ 236s] Development/Debug http://www.x.org (none) (none) (none) [ 236s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 236s] cpio gzip 9 [ 236s] RPM meta information is different [ 236s] compare /.build.oldpackages/libICE-debugsource-1.0.8-1.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libICE-debugsource-1.0.8-1.8.armv7l.rpm [ 237s] --- /tmp/tmp.4mIBcsfTSI 2013-11-07 08:40:35.394118387 +0000 [ 237s] +++ /tmp/tmp.RHP2o1gqSw 2013-11-07 08:40:35.410118387 +0000 [ 237s] @@ -3,7 +3,7 @@ [ 237s] This package provides debug sources for package libICE. [ 237s] Debug sources are useful when developing applications that use this [ 237s] package or when debugging this package. [ 237s] - tizen Tizen:2.2:Main obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/343f7281df629a638c7f2c128dc47178-libICE MIT MIT [ 237s] + tizen Tizen:2.2:Main obs://w12.vlan200.tizendev.org/Tizen:2.2:Main/standard/343f7281df629a638c7f2c128dc47178-libICE MIT MIT [ 237s] Development/Debug http://www.x.org (none) (none) (none) [ 237s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 237s] cpio gzip 9 [ 237s] RPM meta information is different [ 237s] compare /.build.oldpackages/libICE-devel-1.0.8-1.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libICE-devel-1.0.8-1.8.armv7l.rpm [ 237s] --- /tmp/tmp.9spF07lCtg 2013-11-07 08:40:35.462118387 +0000 [ 237s] +++ /tmp/tmp.O7L7BjQwyT 2013-11-07 08:40:35.474118387 +0000 [ 237s] @@ -1,7 +1,7 @@ [ 237s] libICE-devel 1.0.8 (none) [ 237s] X.Org X11 ICE development package [ 237s] The X.Org X11 ICE (Inter-Client Exchange) development package. [ 237s] - tizen Tizen:2.2:Main obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/343f7281df629a638c7f2c128dc47178-libICE MIT MIT [ 237s] + tizen Tizen:2.2:Main obs://w12.vlan200.tizendev.org/Tizen:2.2:Main/standard/343f7281df629a638c7f2c128dc47178-libICE MIT MIT [ 237s] Development/Libraries http://www.x.org (none) (none) (none) [ 237s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 237s] cpio gzip 9 [ 237s] RPM meta information is different [ 237s] ... saving built statistics [ 237s] ... saving built packages [ 237s] /home/abuild/rpmbuild/RPMS/armv7l/libICE-1.0.8-1.8.armv7l.rpm [ 237s] /home/abuild/rpmbuild/RPMS/armv7l/libICE-debuginfo-1.0.8-1.8.armv7l.rpm [ 237s] /home/abuild/rpmbuild/RPMS/armv7l/libICE-debugsource-1.0.8-1.8.armv7l.rpm [ 237s] /home/abuild/rpmbuild/RPMS/armv7l/libICE-devel-1.0.8-1.8.armv7l.rpm [ 237s] /home/abuild/rpmbuild/SRPMS/libICE-1.0.8-1.8.src.rpm [ 237s] /home/abuild/rpmbuild/OTHER/_statistics [ 237s] [ 237s] w12 finished "build libICE.spec" at Thu Nov 7 08:40:35 UTC 2013. [ 237s] [ 238s] /.build/build: line 368: 241 Killed background_monitor_process [ 240s] [ 219.768524] SysRq : Power Off [ 240s] [ 219.776287] Power down. [ 240s] build: extracting built packages... [ 240s] libICE-1.0.8-1.8.armv7l.rpm [ 240s] libICE-debuginfo-1.0.8-1.8.armv7l.rpm [ 240s] libICE-debugsource-1.0.8-1.8.armv7l.rpm [ 240s] libICE-devel-1.0.8-1.8.armv7l.rpm [ 240s] libICE-1.0.8-1.8.src.rpm [ 240s] _statistics