[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w03 started "build libdri2.spec" at Thu Nov 7 09:12:16 UTC 2013. [ 0s] [ 0s] Building libdri2 for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '3bacdf655e1bdec6cf2c8382c45b9057' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/libdri2.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/libdri2.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/libdri2.spec build rpmlint-Factory ... [ 0s] hostname: Name or service not known [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm -> rpm-libs [ 0s] [1/56] preinstalling libgcc... [ 0s] [2/56] preinstalling setup... [ 0s] [3/56] preinstalling filesystem... [ 0s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 2s] [50/56] preinstalling popt-x86-arm... [ 3s] [51/56] preinstalling rpm-libs-x86-arm... [ 3s] [52/56] preinstalling sqlite-x86-arm... [ 3s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] done [ 7s] booting kvm ... [ 7s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4 [ 10s] doing fast boot [ 10s] Creating device nodes with udev [ 11s] Waiting for device /dev/vda to appear: ok [ 11s] fsck from util-linux 2.21.2 [ 11s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 11s] /dev/vda: clean, 6853/2097152 files, 239142/8388608 blocks [ 11s] fsck succeeded. Mounting root device read-write. [ 11s] Mounting root /dev/vda [ 11s] mount -o rw -t ext4 /dev/vda /root [ 11s] replacing /etc/mtab with symlink to /proc/self/mounts [ 11s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 12s] 2nd stage started in virtual machine [ 12s] machine type: armv7l [ 12s] switching personality to 8... [ 13s] 2nd stage started in virtual machine [ 13s] machine type: armv7l [ 13s] swapon on /dev/vdb [ 13s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 13s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 13s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 13s] logging output to //.build.log... [ 13s] processing specfile /.build-srcdir/libdri2.spec ... [ 13s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/libdri2.spec build rpmlint-Factory ... [ 14s] running rpm-x86-arm postinstall script [ 14s] /bin/rpm [ 14s] /usr/bin/rpm2cpio [ 14s] /usr/bin/rpmdb [ 14s] /usr/bin/rpmquery [ 14s] /usr/bin/rpmsign [ 14s] /usr/bin/rpmverify [ 14s] running rpm-libs-x86-arm postinstall script [ 14s] running tizen-accelerator postinstall script [ 14s] running bash-x86-arm postinstall script [ 14s] initializing rpm db... [ 18s] [1/161] installing kernel-headers-3.0.15-1.10 [ 19s] [2/161] installing libX11-common-1.5.0-3.4 [ 19s] [3/161] installing tizen-release-2.2.0-1.9 [ 19s] [4/161] installing tzdata-2011h-1.10 [ 19s] [5/161] installing libgcc-4.5.3-2.33 [ 19s] [6/161] installing setup-0.1-2.6 [ 19s] [7/161] installing filesystem-0.1-1.9 [ 20s] warning: group lock does not exist - using root [ 20s] warning: group mail does not exist - using root [ 20s] [8/161] installing eglibc-2.13-2.18 [ 20s] [9/161] installing libstdc++-4.5.3-2.33 [ 21s] [10/161] installing eglibc-common-2.13-2.18 [ 22s] /var/tmp/rpm-tmp.cJKuwS: line 2: /usr/bin/xargs: No such file or directory [ 22s] [11/161] installing libstdc++-devel-4.5.3-2.33 [ 23s] [12/161] installing bash-4.1-4.9 [ 23s] [13/161] installing bzip2-libs-1.0.5-5.12 [ 23s] [14/161] installing c-ares-1.7.4-3.22 [ 23s] [15/161] installing cpio-2.8-4.8 [ 23s] [16/161] installing diffutils-3.0-4.8 [ 23s] [17/161] installing e2fsprogs-libs-1.41.9-3.8 [ 23s] [18/161] installing elfutils-libelf-0.152-2.16 [ 23s] [19/161] installing fdupes-1.40-42.10 [ 23s] [20/161] installing findutils-4.2.31-2.8 [ 23s] [21/161] installing gdbm-1.8.3-2.33 [ 24s] [22/161] installing libXau-1.0.7-1.8 [ 24s] [23/161] installing libattr-2.4.44-8.12 [ 24s] [24/161] installing libgomp-4.5.3-2.33 [ 24s] [25/161] installing libidn-1.15-7.29 [ 24s] [26/161] installing liblua-5.1.4-7.7 [ 24s] [27/161] installing libuuid-2.20.2-7.7 [ 24s] [28/161] installing lzo-2.03-2.18 [ 24s] [29/161] installing m4-1.4.14-1.9 [ 24s] [30/161] installing make-3.81-1.12 [ 24s] [31/161] installing net-tools-1.60-88.9 [ 24s] [32/161] installing nspr-4.8.7-1.17 [ 24s] [33/161] installing nss-softokn-freebl-3.12.9-3.28 [ 25s] [34/161] installing patch-2.6.1.169-1.9 [ 25s] [35/161] installing pkgconfig-0.25-3.11 [ 25s] [36/161] installing popt-1.16-4.11 [ 25s] [37/161] installing readline-5.2-14.7 [ 25s] [38/161] installing sed-4.1.5-3.8 [ 25s] [39/161] installing sqlite-3.7.13-1.12 [ 25s] [40/161] installing xz-libs-5.0.3-2.17 [ 25s] [41/161] installing zlib-1.2.5-3.18 [ 25s] [42/161] installing gmp-5.0.1-2.16 [ 25s] [43/161] installing libpcre-7.7-4.44 [ 25s] [44/161] installing ncurses-libs-5.7-4.11 [ 26s] [45/161] installing build-compare-2009.10.14-26.14 [ 26s] [46/161] installing libpthread-stubs-0.3-2.9 [ 26s] [47/161] installing qemu.x86_64-1.2-2.10 [ 28s] [48/161] installing xorg-x11-proto-core-7.0.25-2.8 [ 28s] [49/161] installing xorg-x11-proto-dri2-2.8-3.9 [ 28s] [50/161] installing xorg-x11-proto-kb-1.0.6-2.8 [ 28s] [51/161] installing xorg-x11-proto-xext-7.2.1-2.9 [ 29s] [52/161] installing xorg-x11-xutils-dev-7.7-1.10 [ 29s] [53/161] installing eglibc-headers-2.13-2.18 [ 29s] [54/161] installing libcap-2.21-2.10 [ 29s] [55/161] installing unzip-6.0-10.16 [ 29s] [56/161] installing zlib-devel-1.2.5-3.18 [ 29s] [57/161] installing grep-2.5.1a-63.9 [ 29s] [58/161] installing libacl-2.2.49-3.12 [ 29s] [59/161] installing libfile-5.04-2.11 [ 30s] [60/161] installing libxcb-1.8.1-1.7 [ 30s] [61/161] installing lzo-minilzo-2.03-2.18 [ 30s] [62/161] installing mpfr-3.0.0-1.16 [ 30s] [63/161] installing ncurses-5.7-4.11 [ 30s] [64/161] installing binutils-2.22-1.12 [ 31s] [65/161] installing bzip2-1.0.5-5.12 [ 31s] [66/161] installing libblkid-2.20.2-7.7 [ 31s] [67/161] installing xz-5.0.3-2.17 [ 33s] [68/161] installing elfutils-libs-0.152-2.16 [ 33s] [69/161] installing nss-3.12.9-3.28 [ 34s] [70/161] installing perl-5.12.1-62.7 [ 41s] [71/161] installing ncurses-base-5.7-4.11 [ 41s] [72/161] installing perl-HTML-Tagset-3.20-8.2 [ 41s] [73/161] installing perl-IO-Compress-Base-2.008-62.7 [ 41s] [74/161] installing perl-Module-Pluggable-3.60-62.7 [ 42s] [75/161] installing perl-Pod-Escapes-1.04-62.7 [ 42s] [76/161] installing perl-TimeDate-1.20-1.2 [ 42s] [77/161] installing eglibc-devel-2.13-2.18 [ 42s] [78/161] installing xorg-x11-proto-fixes-5.0-2.7 [ 42s] [79/161] installing libXau-devel-1.0.7-1.8 [ 42s] [80/161] installing lzo-devel-2.03-2.18 [ 43s] [81/161] installing perl-Compress-Raw-Zlib-2.008-62.7 [ 43s] [82/161] installing perl-devel-5.12.1-62.7 [ 43s] [83/161] installing perl-libs-5.12.1-62.7 [ 43s] [84/161] installing tar-1.17-5.11 [ 43s] [85/161] installing coreutils-6.9-9.12 [ 44s] [86/161] installing file-5.04-2.11 [ 44s] [87/161] installing libX11-1.5.0-3.4 [ 44s] [88/161] installing libmount-2.20.2-7.7 [ 44s] [89/161] installing mpc-0.9-1.16 [ 44s] [90/161] installing openssl-1.0.1c-2.26 [ 44s] [91/161] installing xz-lzma-compat-5.0.3-2.17 [ 44s] [92/161] installing elfutils-0.152-2.16 [ 45s] [93/161] installing nss-sysinit-3.12.9-3.28 [ 45s] [94/161] installing perl-ExtUtils-ParseXS-2.18-62.7 [ 45s] [95/161] installing perl-Pod-Simple-3.07-62.7 [ 45s] [96/161] installing perl-Test-Simple-0.80-62.7 [ 45s] [97/161] installing tizen-accelerator-1.0.1-1.14 [ 45s] [98/161] installing libXext-1.3.1-1.3 [ 46s] [99/161] installing libXfixes-5.0-2.3 [ 46s] [100/161] installing perl-IO-Compress-Zlib-2.008-62.7 [ 46s] [101/161] installing perl-Test-Harness-3.12-62.7 [ 46s] [102/161] installing gawk-3.1.5-2.9 [ 46s] [103/161] installing gzip-1.3.14-3.8 [ 46s] [104/161] installing libxcb-devel-1.8.1-1.7 [ 46s] [105/161] installing build-2011.01.10a-1.9 [ 46s] [106/161] installing libcurl-7.28.1-3.26 [ 47s] [107/161] installing cpp-4.5.3-2.33 [ 47s] [108/161] installing util-linux-2.20.2-7.7 [ 47s] warning: group tty does not exist - using root [ 47s] /bin/chown: `root:root': invalid user [ 48s] [109/161] installing bzip2-libs-x86-arm-1.0.5-9.7 [ 48s] [110/161] installing eglibc-x86-arm-2.13-9.7 [ 49s] [111/161] installing elfutils-libelf-x86-arm-0.152-9.7 [ 49s] [112/161] installing elfutils-libs-x86-arm-0.152-9.7 [ 49s] [113/161] installing gmp-x86-arm-5.0.1-9.7 [ 50s] [114/161] installing libacl-x86-arm-2.2.49-9.7 [ 50s] [115/161] installing libattr-x86-arm-2.4.44-9.7 [ 50s] [116/161] installing libcap-x86-arm-2.21-9.6 [ 51s] [117/161] installing libfile-x86-arm-5.04-9.7 [ 51s] [118/161] installing libgcc-x86-arm-4.5.3-9.7 [ 51s] [119/161] installing liblua-x86-arm-5.1.4-9.7 [ 51s] [120/161] installing mpc-x86-arm-0.9-9.7 [ 52s] [121/161] installing mpfr-x86-arm-3.0.0-9.7 [ 52s] [122/161] installing ncurses-libs-x86-arm-5.7-9.6 [ 53s] [123/161] installing nspr-x86-arm-4.8.7-9.7 [ 53s] [124/161] installing nss-softokn-freebl-x86-arm-3.12.9-9.7 [ 53s] [125/161] installing nss-x86-arm-3.12.9-9.7 [ 54s] [126/161] installing perl-ExtUtils-MakeMaker-6.36-62.7 [ 54s] [127/161] installing popt-x86-arm-1.16-9.7 [ 54s] [128/161] installing sqlite-x86-arm-3.7.13-9.6 [ 55s] [129/161] installing xz-libs-x86-arm-5.0.3-9.7 [ 55s] [130/161] installing zlib-x86-arm-1.2.5-7.6 [ 55s] [131/161] installing libX11-devel-1.5.0-3.4 [ 55s] [132/161] installing curl-7.28.1-3.26 [ 56s] [133/161] installing gcc-4.5.3-2.33 [ 56s] [134/161] installing perl-CPAN-1.9205-62.7 [ 56s] [135/161] installing bash-x86-arm-4.1-7.7 [ 56s] [136/161] installing fdupes-x86-arm-1.40-9.7 [ 57s] [137/161] installing findutils-x86-arm-4.2.31-7.7 [ 57s] [138/161] installing gawk-x86-arm-3.1.5-7.7 [ 57s] [139/161] installing gzip-x86-arm-1.3.14-9.7 [ 57s] [140/161] installing make-x86-arm-3.81-8.6 [ 57s] [141/161] installing patch-x86-arm-2.6.1.169-7.7 [ 58s] [142/161] installing sed-x86-arm-4.1.5-9.7 [ 58s] /bin/sed.orig-arm already present - skipping. [ 58s] [143/161] installing diffutils-x86-arm-3.0-9.7 [ 58s] /usr/bin/cmp.orig-arm already present - skipping. [ 58s] /usr/bin/diff.orig-arm already present - skipping. [ 58s] /usr/bin/diff3.orig-arm already present - skipping. [ 58s] /usr/bin/sdiff.orig-arm already present - skipping. [ 58s] [144/161] installing libXext-devel-1.3.1-1.3 [ 58s] [145/161] installing libXfixes-devel-5.0-2.3 [ 58s] [146/161] installing autoconf-2.68-1.9 [ 58s] [147/161] installing coreutils-x86-arm-6.9-7.7 [ 61s] [148/161] installing file-x86-arm-5.04-7.7 [ 61s] [149/161] installing tar-x86-arm-1.17-9.6 [ 61s] /bin/tar.orig-arm already present - skipping. [ 61s] [150/161] installing elfutils-x86-arm-0.152-7.8 [ 61s] [151/161] installing gcc-c++-4.5.3-2.33 [ 62s] [152/161] installing rpm-4.9.1-4.12 [ 62s] [153/161] installing automake-1.11.1-3.12 [ 62s] [154/161] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 63s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 63s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 63s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 63s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 63s] [155/161] installing rpm-libs-4.9.1-4.12 [ 63s] [156/161] installing rpm-libs-x86-arm-4.9.1-10.7 [ 63s] [157/161] installing libtool-2.2.6b-2.15 [ 64s] [158/161] installing cross-armv7l-binutils-accel-armv7l-2.22-1.6 [ 64s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 64s] [159/161] installing rpm-build-4.9.1-4.12 [ 64s] [160/161] installing rpm-x86-arm-4.9.1-9.7 [ 64s] /bin/rpm.orig-arm already present - skipping. [ 64s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 64s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 64s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 64s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 64s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 64s] [161/161] installing rpm-build-x86-arm-4.9.1-9.7 [ 64s] /usr/bin/rpmbuild [ 64s] /usr/lib/rpm/debugedit [ 64s] now finalizing build dir... [ 65s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 68s] build target is armv7l-tizen-linux [ 68s] ----------------------------------------------------------------- [ 68s] I have the following modifications for libdri2.spec: [ 68s] 4c4 [ 68s] < Release: 12 [ 68s] --- [ 68s] > Release: 12.3 [ 68s] ----------------------------------------------------------------- [ 68s] ----- building libdri2.spec (user abuild) [ 68s] ----------------------------------------------------------------- [ 68s] ----------------------------------------------------------------- [ 68s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/standard/3bacdf655e1bdec6cf2c8382c45b9057-libdri2' /home/abuild/rpmbuild/SOURCES/libdri2.spec [ 68s] Building target platforms: armv7l-tizen-linux [ 68s] Building for target armv7l-tizen-linux [ 68s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.4YQ38S [ 68s] + umask 022 [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + LANG=C [ 68s] + export LANG [ 68s] + unset DISPLAY [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + rm -rf libdri2-0.1.0 [ 68s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libdri2-0.1.0.tar.gz [ 68s] + /bin/tar -xf - [ 68s] + STATUS=0 [ 68s] + '[' 0 -ne 0 ']' [ 68s] + cd libdri2-0.1.0 [ 68s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 68s] + exit 0 [ 68s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.nmMDFz [ 68s] + umask 022 [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + cd libdri2-0.1.0 [ 68s] + LANG=C [ 68s] + export LANG [ 68s] + unset DISPLAY [ 68s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 68s] + export CFLAGS [ 68s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 68s] + export CXXFLAGS [ 68s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 68s] + export FFLAGS [ 68s] + LD_AS_NEEDED=1 [ 68s] + export LD_AS_NEEDED [ 68s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 68s] + export CFLAGS [ 68s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 68s] + export CXXFLAGS [ 68s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 68s] + export FFLAGS [ 68s] + autoreconf -v --install --force [ 71s] autoreconf: Entering directory `.' [ 71s] autoreconf: configure.ac: not using Gettext [ 72s] autoreconf: running: aclocal --force [ 88s] autoreconf: configure.ac: tracing [ 93s] autoreconf: running: libtoolize --copy --force [ 93s] libtoolize: putting auxiliary files in `.'. [ 93s] libtoolize: copying file `./ltmain.sh' [ 93s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 93s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 93s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 105s] autoreconf: running: /usr/bin/autoconf --force [ 114s] autoreconf: running: /usr/bin/autoheader --force [ 120s] autoreconf: running: automake --add-missing --copy --force-missing [ 124s] configure.ac:11: installing `./config.guess' [ 124s] configure.ac:11: installing `./config.sub' [ 124s] configure.ac:8: installing `./install-sh' [ 124s] configure.ac:8: installing `./missing' [ 124s] src/Makefile.am: installing `./depcomp' [ 125s] autoreconf: Leaving directory `.' [ 125s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 125s] checking for a BSD-compatible install... /usr/bin/install -c [ 126s] checking whether build environment is sane... yes [ 126s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 126s] checking for gawk... gawk [ 126s] checking whether make sets $(MAKE)... yes [ 127s] checking build system type... armv7l-unknown-linux-gnueabi [ 127s] checking host system type... armv7l-unknown-linux-gnueabi [ 127s] checking for style of include used by make... GNU [ 127s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 127s] checking for gcc... gcc [ 127s] checking whether the C compiler works... yes [ 127s] checking for C compiler default output file name... a.out [ 127s] checking for suffix of executables... [ 127s] checking whether we are cross compiling... no [ 127s] checking for suffix of object files... o [ 127s] checking whether we are using the GNU C compiler... yes [ 127s] checking whether gcc accepts -g... yes [ 127s] checking for gcc option to accept ISO C89... none needed [ 127s] checking dependency style of gcc... gcc3 [ 127s] checking for a sed that does not truncate output... /bin/sed [ 127s] checking for grep that handles long lines and -e... /bin/grep [ 127s] checking for egrep... /bin/grep -E [ 127s] checking for fgrep... /bin/grep -F [ 127s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 127s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 127s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 127s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 127s] checking whether ln -s works... yes [ 127s] checking the maximum length of command line arguments... 1572864 [ 127s] checking whether the shell understands some XSI constructs... yes [ 127s] checking whether the shell understands "+="... yes [ 127s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 127s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 127s] checking for objdump... objdump [ 127s] checking how to recognize dependent libraries... pass_all [ 127s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 127s] checking for ar... ar [ 127s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 127s] checking for strip... strip [ 127s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 127s] checking for ranlib... ranlib [ 127s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 127s] checking how to run the C preprocessor... gcc -E [ 127s] checking for ANSI C header files... yes [ 127s] checking for sys/types.h... yes [ 127s] checking for sys/stat.h... yes [ 127s] checking for stdlib.h... yes [ 127s] checking for string.h... yes [ 128s] checking for memory.h... yes [ 128s] checking for strings.h... yes [ 128s] checking for inttypes.h... yes [ 128s] checking for stdint.h... yes [ 128s] checking for unistd.h... yes [ 128s] checking for dlfcn.h... yes [ 128s] checking for objdir... .libs [ 128s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 128s] checking for gcc option to produce PIC... -fPIC -DPIC [ 128s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 128s] checking if gcc static flag -static works... no [ 128s] checking if gcc supports -c -o file.o... yes [ 128s] checking if gcc supports -c -o file.o... (cached) yes [ 128s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 128s] checking whether -lc should be explicitly linked in... no [ 128s] checking dynamic linker characteristics... GNU/Linux ld.so [ 128s] checking how to hardcode library paths into programs... immediate [ 128s] checking whether stripping libraries is possible... yes [ 128s] checking if libtool supports shared libraries... yes [ 128s] checking whether to build shared libraries... yes [ 128s] checking whether to build static libraries... no [ 128s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 128s] checking whether we are using the GNU C compiler... (cached) yes [ 128s] checking whether gcc accepts -g... (cached) yes [ 128s] checking for gcc option to accept ISO C89... (cached) none needed [ 128s] checking dependency style of gcc... (cached) gcc3 [ 128s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 128s] checking for pkg-config... /usr/bin/pkg-config [ 128s] checking pkg-config is at least version 0.9.0... yes [ 128s] checking for XLIBS... yes [ 128s] checking for DRI2PROTO... yes [ 128s] configure: creating ./config.status [ 129s] config.status: creating Makefile [ 129s] config.status: creating src/Makefile [ 129s] config.status: creating libdri2.pc [ 129s] config.status: creating config.h [ 129s] config.status: executing depfiles commands [ 129s] config.status: executing libtool commands [ 129s] + make -j4 [ 129s] make all-recursive [ 129s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0' [ 129s] Making all in src [ 129s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0/src' [ 129s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT libdri2_la-dri2.lo -MD -MP -MF .deps/libdri2_la-dri2.Tpo -c -o libdri2_la-dri2.lo `test -f 'dri2.c' || echo './'`dri2.c [ 129s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT libdri2_la-dri2.lo -MD -MP -MF .deps/libdri2_la-dri2.Tpo -c dri2.c -fPIC -DPIC -o .libs/libdri2_la-dri2.o [ 129s] mv -f .deps/libdri2_la-dri2.Tpo .deps/libdri2_la-dri2.Plo [ 129s] /bin/sh ../libtool --tag=CC --mode=link gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -o libdri2.la -rpath /usr/lib libdri2_la-dri2.lo -lX11 -lXext [ 129s] libtool: link: gcc -shared .libs/libdri2_la-dri2.o -lX11 -lXext -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -mthumb -Wl,-soname -Wl,libdri2.so.0 -o .libs/libdri2.so.0.0.0 [ 129s] libtool: link: (cd ".libs" && rm -f "libdri2.so.0" && ln -s "libdri2.so.0.0.0" "libdri2.so.0") [ 129s] libtool: link: (cd ".libs" && rm -f "libdri2.so" && ln -s "libdri2.so.0.0.0" "libdri2.so") [ 129s] libtool: link: ( cd ".libs" && rm -f "libdri2.la" && ln -s "../libdri2.la" "libdri2.la" ) [ 129s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0/src' [ 129s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0' [ 129s] make[2]: Nothing to be done for `all-am'. [ 129s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0' [ 129s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0' [ 129s] + exit 0 [ 129s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.QWuJzZ [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd libdri2-0.1.0 [ 129s] + LANG=C [ 129s] + export LANG [ 129s] + unset DISPLAY [ 129s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm [ 129s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm [ 129s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm [ 129s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/share/license [ 129s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/share/license/libdri2 [ 129s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm install [ 129s] Making install in src [ 129s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0/src' [ 129s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0/src' [ 129s] make[2]: Nothing to be done for `install-exec-am'. [ 129s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/lib" [ 129s] /usr/bin/install -c -m 644 dri2.h '/home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/lib' [ 129s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/lib" [ 129s] /bin/sh ../libtool --mode=install /usr/bin/install -c libdri2.la '/home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/lib' [ 129s] libtool: install: /usr/bin/install -c .libs/libdri2.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/lib/libdri2.so.0.0.0 [ 129s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/lib && { ln -s -f libdri2.so.0.0.0 libdri2.so.0 || { rm -f libdri2.so.0 && ln -s libdri2.so.0.0.0 libdri2.so.0; }; }) [ 129s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/lib && { ln -s -f libdri2.so.0.0.0 libdri2.so || { rm -f libdri2.so && ln -s libdri2.so.0.0.0 libdri2.so; }; }) [ 129s] libtool: install: /usr/bin/install -c .libs/libdri2.lai /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/lib/libdri2.la [ 129s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 129s] test -z "/usr/include/dri2" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/include/dri2" [ 129s] /usr/bin/install -c -m 644 ../src/dri2.h '/home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/include/dri2' [ 129s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0/src' [ 129s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0/src' [ 129s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0' [ 129s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0' [ 129s] make[2]: Nothing to be done for `install-exec-am'. [ 129s] test -z "/usr/lib/pkgconfig/" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/lib/pkgconfig/" [ 129s] /usr/bin/install -c -m 644 libdri2.pc '/home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/lib/pkgconfig/' [ 129s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0' [ 129s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libdri2-0.1.0' [ 129s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/share/info/dir [ 129s] + xargs rm -f -- [ 129s] + find /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm -regex '.*\.la$' [ 129s] + find /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm -regex '.*\.a$' [ 129s] + xargs rm -f -- [ 129s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libdri2-0.1.0 [ 129s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm/usr/lib/libdri2.so.0.0.0 [ 129s] symlinked /usr/lib/debug/usr/lib/libdri2.so.0.0.0.debug to /usr/lib/debug/usr/lib/libdri2.so.0.debug [ 129s] symlinked /usr/lib/debug/usr/lib/libdri2.so.0.0.0.debug to /usr/lib/debug/usr/lib/libdri2.so.debug [ 129s] 51 blocks [ 130s] + /usr/lib/rpm/check-buildroot [ 130s] + /usr/lib/rpm//brp-compress [ 130s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 130s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 130s] + /usr/lib/rpm/brp-python-bytecompile [ 130s] + /usr/lib/rpm/brp-python-hardlink [ 130s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm [ 130s] Processing files: libdri2-0.1.0-12.3.armv7l [ 130s] Provides: libdri2.so.0 [ 130s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 130s] Requires: libX11.so.6 libXext.so.6 libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 130s] Processing files: libdri2-devel-0.1.0-12.3.armv7l [ 130s] Provides: pkgconfig(libdri2) = 2.1 [ 130s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 130s] Requires: /usr/bin/pkg-config libdri2.so.0 [ 130s] Processing files: libdri2-debuginfo-0.1.0-12.3.armv7l [ 130s] Processing files: libdri2-debugsource-0.1.0-12.3.armv7l [ 130s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm [ 130s] Wrote: /home/abuild/rpmbuild/SRPMS/libdri2-0.1.0-12.3.src.rpm [ 130s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libdri2-0.1.0-12.3.armv7l.rpm [ 130s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libdri2-devel-0.1.0-12.3.armv7l.rpm [ 130s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libdri2-debuginfo-0.1.0-12.3.armv7l.rpm [ 130s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libdri2-debugsource-0.1.0-12.3.armv7l.rpm [ 130s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ilV4tL [ 130s] + umask 022 [ 130s] + cd /home/abuild/rpmbuild/BUILD [ 130s] + cd libdri2-0.1.0 [ 130s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libdri2-0.1.0-12.3.arm [ 130s] + exit 0 [ 130s] ... checking for files with abuild user/group [ 130s] ... creating baselibs [ 131s] ... comparing built packages with the former built [ 131s] /usr/lib/build/rpm-check.sh [ 131s] compare /.build.oldpackages/libdri2-0.1.0-12.2.src.rpm /home/abuild/rpmbuild/SRPMS/libdri2-0.1.0-12.3.src.rpm [ 131s] compare /.build.oldpackages/libdri2-0.1.0-12.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libdri2-0.1.0-12.3.armv7l.rpm [ 131s] --- /tmp/tmp.FSjcRAYksq 2013-11-07 09:14:27.118566301 +0000 [ 131s] +++ /tmp/tmp.KFDkWcHA4n 2013-11-07 09:14:27.130566302 +0000 [ 131s] @@ -1,7 +1,7 @@ [ 131s] libdri2 0.1.0 (none) [ 131s] X.Org DRI2 Extension client library [ 131s] DRI2 Extension client library [ 131s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/3bacdf655e1bdec6cf2c8382c45b9057-libdri2 MIT MIT [ 131s] + tizen Tizen:2.2:Main obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/standard/3bacdf655e1bdec6cf2c8382c45b9057-libdri2 MIT MIT [ 131s] System/Libraries (none) (none) (none) (none) [ 131s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 131s] cpio gzip 9 [ 131s] RPM meta information is different [ 131s] compare /.build.oldpackages/libdri2-debuginfo-0.1.0-12.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libdri2-debuginfo-0.1.0-12.3.armv7l.rpm [ 131s] --- /tmp/tmp.rGXDVfS76K 2013-11-07 09:14:27.178566302 +0000 [ 131s] +++ /tmp/tmp.uFxLXyPAhz 2013-11-07 09:14:27.190566303 +0000 [ 131s] @@ -3,7 +3,7 @@ [ 131s] This package provides debug information for package libdri2. [ 131s] Debug information is useful when developing applications that use this [ 131s] package or when debugging this package. [ 131s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/3bacdf655e1bdec6cf2c8382c45b9057-libdri2 MIT MIT [ 131s] + tizen Tizen:2.2:Main obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/standard/3bacdf655e1bdec6cf2c8382c45b9057-libdri2 MIT MIT [ 131s] Development/Debug (none) (none) (none) (none) [ 131s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 131s] cpio gzip 9 [ 131s] RPM meta information is different [ 131s] compare /.build.oldpackages/libdri2-debugsource-0.1.0-12.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libdri2-debugsource-0.1.0-12.3.armv7l.rpm [ 131s] --- /tmp/tmp.f7U38UuEDK 2013-11-07 09:14:27.234566303 +0000 [ 131s] +++ /tmp/tmp.FjvfwzErpm 2013-11-07 09:14:27.250566303 +0000 [ 131s] @@ -3,7 +3,7 @@ [ 131s] This package provides debug sources for package libdri2. [ 131s] Debug sources are useful when developing applications that use this [ 131s] package or when debugging this package. [ 131s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/3bacdf655e1bdec6cf2c8382c45b9057-libdri2 MIT MIT [ 131s] + tizen Tizen:2.2:Main obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/standard/3bacdf655e1bdec6cf2c8382c45b9057-libdri2 MIT MIT [ 131s] Development/Debug (none) (none) (none) (none) [ 131s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 131s] cpio gzip 9 [ 131s] RPM meta information is different [ 131s] compare /.build.oldpackages/libdri2-devel-0.1.0-12.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libdri2-devel-0.1.0-12.3.armv7l.rpm [ 131s] --- /tmp/tmp.aBLiRKmkKR 2013-11-07 09:14:27.298566304 +0000 [ 131s] +++ /tmp/tmp.cSvJr5Gk2a 2013-11-07 09:14:27.310566304 +0000 [ 131s] @@ -1,7 +1,7 @@ [ 131s] libdri2-devel 0.1.0 (none) [ 131s] X.Org DRI2 Extension client library (development library) [ 131s] DRI2 Extension client library (development library) [ 131s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/3bacdf655e1bdec6cf2c8382c45b9057-libdri2 MIT MIT [ 131s] + tizen Tizen:2.2:Main obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/standard/3bacdf655e1bdec6cf2c8382c45b9057-libdri2 MIT MIT [ 131s] System/Libraries (none) (none) (none) (none) [ 131s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 131s] cpio gzip 9 [ 131s] RPM meta information is different [ 131s] ... saving built statistics [ 131s] ... saving built packages [ 131s] /home/abuild/rpmbuild/RPMS/armv7l/libdri2-0.1.0-12.3.armv7l.rpm [ 131s] /home/abuild/rpmbuild/RPMS/armv7l/libdri2-debuginfo-0.1.0-12.3.armv7l.rpm [ 131s] /home/abuild/rpmbuild/RPMS/armv7l/libdri2-debugsource-0.1.0-12.3.armv7l.rpm [ 131s] /home/abuild/rpmbuild/RPMS/armv7l/libdri2-devel-0.1.0-12.3.armv7l.rpm [ 131s] /home/abuild/rpmbuild/SRPMS/libdri2-0.1.0-12.3.src.rpm [ 131s] /home/abuild/rpmbuild/OTHER/_statistics [ 131s] [ 132s] w03 finished "build libdri2.spec" at Thu Nov 7 09:14:27 UTC 2013. [ 132s] [ 133s] /.build/build: line 368: 221 Killed background_monitor_process [ 135s] [ 124.617066] SysRq : Power Off [ 135s] [ 124.624764] Power down. [ 135s] build: extracting built packages... [ 135s] libdri2-0.1.0-12.3.armv7l.rpm [ 135s] libdri2-debuginfo-0.1.0-12.3.armv7l.rpm [ 135s] libdri2-debugsource-0.1.0-12.3.armv7l.rpm [ 135s] libdri2-devel-0.1.0-12.3.armv7l.rpm [ 135s] libdri2-0.1.0-12.3.src.rpm [ 135s] _statistics