[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w15 started "build libpciaccess.spec" at Thu Nov 7 08:32:49 UTC 2013. [ 0s] [ 0s] Building libpciaccess for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 'a827f8fb745c62213a7b0efd31201968' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/libpciaccess.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/libpciaccess.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/libpciaccess.spec build rpmlint-Factory ... [ 1s] hostname: Name or service not known [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 2s] [11/56] preinstalling liblua... [ 2s] [12/56] preinstalling libstdc++... [ 2s] [13/56] preinstalling ncurses-libs... [ 2s] [14/56] preinstalling nspr... [ 2s] [15/56] preinstalling nss-softokn-freebl... [ 2s] [16/56] preinstalling popt... [ 2s] [17/56] preinstalling readline... [ 2s] [18/56] preinstalling sed... [ 2s] [19/56] preinstalling sqlite... [ 2s] [20/56] preinstalling xz-libs... [ 2s] [21/56] preinstalling zlib... [ 2s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 3s] [33/56] preinstalling rpm-libs... [ 3s] [34/56] preinstalling gmp-x86-arm... [ 3s] [35/56] preinstalling mpc-x86-arm... [ 3s] [36/56] preinstalling mpfr-x86-arm... [ 3s] [37/56] preinstalling bzip2-libs-x86-arm... [ 3s] [38/56] preinstalling eglibc-x86-arm... [ 4s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 5s] [40/56] preinstalling libacl-x86-arm... [ 6s] [41/56] preinstalling libattr-x86-arm... [ 6s] [42/56] preinstalling libcap-x86-arm... [ 6s] [43/56] preinstalling libfile-x86-arm... [ 6s] [44/56] preinstalling libgcc-x86-arm... [ 6s] [45/56] preinstalling liblua-x86-arm... [ 6s] [46/56] preinstalling ncurses-libs-x86-arm... [ 6s] [47/56] preinstalling nspr-x86-arm... [ 6s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 6s] [49/56] preinstalling nss-x86-arm... [ 6s] [50/56] preinstalling popt-x86-arm... [ 6s] [51/56] preinstalling rpm-libs-x86-arm... [ 6s] [52/56] preinstalling sqlite-x86-arm... [ 6s] [53/56] preinstalling xz-libs-x86-arm... [ 6s] [54/56] preinstalling zlib-x86-arm... [ 6s] [55/56] preinstalling bash-x86-arm... [ 6s] [56/56] preinstalling rpm-x86-arm... [ 6s] [ 6s] cycle: perl -> perl-libs [ 6s] breaking dependency perl-libs -> perl [ 6s] [1/8] preinstalling e2fsprogs-libs... [ 6s] [2/8] preinstalling libpcre... [ 6s] [3/8] preinstalling libuuid... [ 6s] [4/8] preinstalling grep... [ 6s] [5/8] preinstalling libblkid... [ 6s] [6/8] preinstalling util-linux... [ 6s] [7/8] preinstalling perl-libs... [ 6s] [8/8] preinstalling perl... [ 7s] copying packages... [ 8s] reordering...cycle: bash -> eglibc -> eglibc-common [ 8s] breaking dependency eglibc-common -> bash [ 8s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 8s] breaking dependency eglibc-common -> coreutils [ 8s] cycle: eglibc -> eglibc-common [ 8s] breaking dependency eglibc-common -> eglibc [ 8s] cycle: eglibc -> eglibc-common -> findutils [ 8s] breaking dependency eglibc-common -> findutils [ 8s] cycle: eglibc -> eglibc-common -> grep [ 8s] breaking dependency grep -> eglibc [ 8s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 8s] breaking dependency grep -> libgcc [ 8s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 8s] breaking dependency libpcre -> eglibc [ 8s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 8s] breaking dependency libpcre -> libgcc [ 8s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 8s] breaking dependency libstdc++ -> eglibc [ 8s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 8s] breaking dependency eglibc-common -> grep [ 8s] cycle: eglibc -> eglibc-common -> libgcc [ 8s] breaking dependency eglibc -> eglibc-common [ 8s] cycle: eglibc -> libgcc [ 8s] breaking dependency libgcc -> eglibc [ 8s] cycle: filesystem -> setup [ 8s] breaking dependency setup -> filesystem [ 8s] cycle: ncurses -> ncurses-libs [ 8s] breaking dependency ncurses-libs -> ncurses [ 8s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 8s] breaking dependency ncurses-libs -> ncurses-base [ 8s] cycle: perl -> perl-libs [ 8s] breaking dependency perl -> perl-libs [ 8s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 8s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 8s] cycle: perl -> perl-IO-Compress-Zlib [ 8s] breaking dependency perl -> perl-IO-Compress-Zlib [ 8s] cycle: perl -> perl-IO-Compress-Base [ 8s] breaking dependency perl -> perl-IO-Compress-Base [ 8s] cycle: perl -> perl-Module-Pluggable [ 8s] breaking dependency perl -> perl-Module-Pluggable [ 8s] cycle: perl -> perl-Pod-Simple [ 8s] breaking dependency perl -> perl-Pod-Simple [ 8s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 8s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 8s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 8s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 8s] cycle: nss -> nss-sysinit [ 8s] breaking dependency nss -> nss-sysinit [ 8s] cycle: perl-CPAN -> perl-Test-Harness [ 8s] breaking dependency perl-Test-Harness -> perl-CPAN [ 8s] cycle: rpm-libs -> rpm [ 8s] breaking dependency rpm -> rpm-libs [ 8s] done [ 37s] booting kvm ... [ 37s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 40s] doing fast boot [ 41s] Creating device nodes with udev [ 54s] Waiting for device /dev/vda to appear: ok [ 54s] fsck from util-linux 2.21.2 [ 54s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 55s] /dev/vda: clean, 6819/2097152 files, 238828/8388608 blocks [ 55s] fsck succeeded. Mounting root device read-write. [ 55s] Mounting root /dev/vda [ 55s] mount -o rw -t ext4 /dev/vda /root [ 68s] replacing /etc/mtab with symlink to /proc/self/mounts [ 73s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 93s] 2nd stage started in virtual machine [ 93s] machine type: armv7l [ 93s] switching personality to 8... [ 93s] 2nd stage started in virtual machine [ 93s] machine type: armv7l [ 95s] swapon on /dev/vdb [ 95s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 95s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 96s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 97s] logging output to //.build.log... [ 97s] processing specfile /.build-srcdir/libpciaccess.spec ... [ 97s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/libpciaccess.spec build rpmlint-Factory ... [ 100s] running rpm-x86-arm postinstall script [ 101s] /bin/rpm [ 101s] /usr/bin/rpm2cpio [ 101s] /usr/bin/rpmdb [ 101s] /usr/bin/rpmquery [ 101s] /usr/bin/rpmsign [ 101s] /usr/bin/rpmverify [ 101s] running rpm-libs-x86-arm postinstall script [ 101s] running tizen-accelerator postinstall script [ 101s] running bash-x86-arm postinstall script [ 101s] initializing rpm db... [ 106s] [1/144] installing kernel-headers-3.0.15-1.9 [ 107s] [2/144] installing tizen-release-2.2.0-1.9 [ 107s] [3/144] installing tzdata-2011h-1.9 [ 107s] [4/144] installing libgcc-4.5.3-2.33 [ 108s] [5/144] installing setup-0.1-2.5 [ 108s] [6/144] installing filesystem-0.1-1.8 [ 114s] warning: group lock does not exist - using root [ 114s] warning: group mail does not exist - using root [ 114s] [7/144] installing eglibc-2.13-2.18 [ 115s] [8/144] installing libstdc++-4.5.3-2.33 [ 116s] [9/144] installing eglibc-common-2.13-2.18 [ 123s] /var/tmp/rpm-tmp.3ezByp: line 2: /usr/bin/xargs: No such file or directory [ 123s] [10/144] installing libstdc++-devel-4.5.3-2.33 [ 124s] [11/144] installing bash-4.1-4.8 [ 124s] [12/144] installing bzip2-libs-1.0.5-5.12 [ 124s] [13/144] installing c-ares-1.7.4-3.22 [ 124s] [14/144] installing cpio-2.8-4.7 [ 124s] [15/144] installing diffutils-3.0-4.8 [ 125s] [16/144] installing e2fsprogs-libs-1.41.9-3.7 [ 125s] [17/144] installing elfutils-libelf-0.152-2.16 [ 125s] [18/144] installing fdupes-1.40-42.10 [ 125s] [19/144] installing findutils-4.2.31-2.7 [ 125s] [20/144] installing gdbm-1.8.3-2.33 [ 125s] [21/144] installing libattr-2.4.44-8.12 [ 126s] [22/144] installing libgomp-4.5.3-2.33 [ 126s] [23/144] installing libidn-1.15-7.29 [ 127s] [24/144] installing liblua-5.1.4-7.7 [ 127s] [25/144] installing libuuid-2.20.2-7.6 [ 128s] [26/144] installing lzo-2.03-2.18 [ 128s] [27/144] installing m4-1.4.14-1.9 [ 128s] [28/144] installing make-3.81-1.12 [ 129s] [29/144] installing net-tools-1.60-88.9 [ 129s] [30/144] installing nspr-4.8.7-1.17 [ 130s] [31/144] installing nss-softokn-freebl-3.12.9-3.28 [ 130s] [32/144] installing patch-2.6.1.169-1.8 [ 130s] [33/144] installing pkgconfig-0.25-3.11 [ 131s] [34/144] installing popt-1.16-4.11 [ 132s] [35/144] installing readline-5.2-14.7 [ 132s] [36/144] installing sed-4.1.5-3.7 [ 133s] [37/144] installing sqlite-3.7.13-1.12 [ 133s] [38/144] installing xz-libs-5.0.3-2.17 [ 134s] [39/144] installing zlib-1.2.5-3.18 [ 134s] [40/144] installing gmp-5.0.1-2.16 [ 134s] [41/144] installing libpcre-7.7-4.44 [ 135s] [42/144] installing ncurses-libs-5.7-4.11 [ 135s] [43/144] installing build-compare-2009.10.14-26.14 [ 135s] [44/144] installing qemu.x86_64-1.2-2.10 [ 139s] [45/144] installing xorg-x11-xutils-dev-7.7-1.10 [ 140s] [46/144] installing eglibc-headers-2.13-2.18 [ 141s] [47/144] installing libcap-2.21-2.10 [ 141s] [48/144] installing unzip-6.0-10.16 [ 142s] [49/144] installing zlib-devel-1.2.5-3.18 [ 142s] [50/144] installing grep-2.5.1a-63.8 [ 142s] [51/144] installing libacl-2.2.49-3.12 [ 143s] [52/144] installing libfile-5.04-2.11 [ 144s] [53/144] installing lzo-minilzo-2.03-2.18 [ 144s] [54/144] installing mpfr-3.0.0-1.16 [ 148s] [55/144] installing ncurses-5.7-4.11 [ 148s] [56/144] installing binutils-2.22-1.12 [ 149s] [57/144] installing bzip2-1.0.5-5.12 [ 149s] [58/144] installing libblkid-2.20.2-7.6 [ 149s] [59/144] installing xz-5.0.3-2.17 [ 150s] [60/144] installing elfutils-libs-0.152-2.16 [ 150s] [61/144] installing nss-3.12.9-3.28 [ 152s] [62/144] installing perl-5.12.1-62.7 [ 158s] [63/144] installing ncurses-base-5.7-4.11 [ 158s] [64/144] installing perl-HTML-Tagset-3.20-8.2 [ 158s] [65/144] installing perl-IO-Compress-Base-2.008-62.7 [ 158s] [66/144] installing perl-Module-Pluggable-3.60-62.7 [ 158s] [67/144] installing perl-Pod-Escapes-1.04-62.7 [ 159s] [68/144] installing perl-TimeDate-1.20-1.2 [ 159s] [69/144] installing eglibc-devel-2.13-2.18 [ 159s] [70/144] installing lzo-devel-2.03-2.18 [ 160s] [71/144] installing perl-Compress-Raw-Zlib-2.008-62.7 [ 160s] [72/144] installing perl-devel-5.12.1-62.7 [ 162s] [73/144] installing perl-libs-5.12.1-62.7 [ 162s] [74/144] installing tar-1.17-5.11 [ 163s] [75/144] installing coreutils-6.9-9.12 [ 164s] [76/144] installing file-5.04-2.11 [ 164s] [77/144] installing libmount-2.20.2-7.6 [ 165s] [78/144] installing mpc-0.9-1.16 [ 165s] [79/144] installing openssl-1.0.1c-2.26 [ 166s] [80/144] installing xz-lzma-compat-5.0.3-2.17 [ 166s] [81/144] installing elfutils-0.152-2.16 [ 167s] [82/144] installing nss-sysinit-3.12.9-3.28 [ 167s] [83/144] installing perl-ExtUtils-ParseXS-2.18-62.7 [ 167s] [84/144] installing perl-Pod-Simple-3.07-62.7 [ 167s] [85/144] installing perl-Test-Simple-0.80-62.7 [ 167s] [86/144] installing tizen-accelerator-1.0.1-1.14 [ 168s] [87/144] installing perl-IO-Compress-Zlib-2.008-62.7 [ 169s] [88/144] installing perl-Test-Harness-3.12-62.7 [ 169s] [89/144] installing gawk-3.1.5-2.8 [ 170s] [90/144] installing gzip-1.3.14-3.8 [ 171s] [91/144] installing build-2011.01.10a-1.9 [ 171s] [92/144] installing libcurl-7.28.1-3.26 [ 171s] [93/144] installing cpp-4.5.3-2.33 [ 171s] [94/144] installing util-linux-2.20.2-7.6 [ 172s] warning: group tty does not exist - using root [ 172s] /bin/chown: `root:root': invalid user [ 172s] [95/144] installing bzip2-libs-x86-arm-1.0.5-9.7 [ 172s] [96/144] installing eglibc-x86-arm-2.13-9.7 [ 173s] [97/144] installing elfutils-libelf-x86-arm-0.152-9.7 [ 173s] [98/144] installing elfutils-libs-x86-arm-0.152-9.7 [ 174s] [99/144] installing gmp-x86-arm-5.0.1-9.7 [ 174s] [100/144] installing libacl-x86-arm-2.2.49-9.7 [ 174s] [101/144] installing libattr-x86-arm-2.4.44-9.7 [ 174s] [102/144] installing libcap-x86-arm-2.21-9.6 [ 175s] [103/144] installing libfile-x86-arm-5.04-9.7 [ 175s] [104/144] installing libgcc-x86-arm-4.5.3-9.7 [ 176s] [105/144] installing liblua-x86-arm-5.1.4-9.7 [ 176s] [106/144] installing mpc-x86-arm-0.9-9.7 [ 176s] [107/144] installing mpfr-x86-arm-3.0.0-9.7 [ 177s] [108/144] installing ncurses-libs-x86-arm-5.7-9.6 [ 177s] [109/144] installing nspr-x86-arm-4.8.7-9.7 [ 177s] [110/144] installing nss-softokn-freebl-x86-arm-3.12.9-9.7 [ 178s] [111/144] installing nss-x86-arm-3.12.9-9.7 [ 178s] [112/144] installing perl-ExtUtils-MakeMaker-6.36-62.7 [ 179s] [113/144] installing popt-x86-arm-1.16-9.7 [ 179s] [114/144] installing sqlite-x86-arm-3.7.13-9.6 [ 179s] [115/144] installing xz-libs-x86-arm-5.0.3-9.7 [ 180s] [116/144] installing zlib-x86-arm-1.2.5-7.6 [ 180s] [117/144] installing curl-7.28.1-3.26 [ 180s] [118/144] installing gcc-4.5.3-2.33 [ 180s] [119/144] installing perl-CPAN-1.9205-62.7 [ 181s] [120/144] installing bash-x86-arm-4.1-7.7 [ 181s] [121/144] installing fdupes-x86-arm-1.40-9.7 [ 181s] [122/144] installing findutils-x86-arm-4.2.31-7.7 [ 181s] [123/144] installing gawk-x86-arm-3.1.5-7.7 [ 181s] [124/144] installing gzip-x86-arm-1.3.14-9.7 [ 182s] [125/144] installing make-x86-arm-3.81-8.6 [ 182s] [126/144] installing patch-x86-arm-2.6.1.169-7.7 [ 182s] [127/144] installing sed-x86-arm-4.1.5-9.7 [ 182s] /bin/sed.orig-arm already present - skipping. [ 182s] [128/144] installing diffutils-x86-arm-3.0-9.7 [ 182s] /usr/bin/cmp.orig-arm already present - skipping. [ 182s] /usr/bin/diff.orig-arm already present - skipping. [ 182s] /usr/bin/diff3.orig-arm already present - skipping. [ 182s] /usr/bin/sdiff.orig-arm already present - skipping. [ 183s] [129/144] installing autoconf-2.68-1.9 [ 183s] [130/144] installing coreutils-x86-arm-6.9-7.7 [ 185s] [131/144] installing file-x86-arm-5.04-7.7 [ 185s] [132/144] installing tar-x86-arm-1.17-9.6 [ 185s] /bin/tar.orig-arm already present - skipping. [ 185s] [133/144] installing elfutils-x86-arm-0.152-7.8 [ 186s] [134/144] installing gcc-c++-4.5.3-2.33 [ 186s] [135/144] installing rpm-4.9.1-4.12 [ 187s] [136/144] installing automake-1.11.1-3.12 [ 187s] [137/144] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 188s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 188s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 188s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 188s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 188s] [138/144] installing rpm-libs-4.9.1-4.12 [ 188s] [139/144] installing rpm-libs-x86-arm-4.9.1-10.7 [ 188s] [140/144] installing libtool-2.2.6b-2.15 [ 189s] [141/144] installing cross-armv7l-binutils-accel-armv7l-2.22-1.6 [ 189s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 189s] [142/144] installing rpm-build-4.9.1-4.12 [ 189s] [143/144] installing rpm-x86-arm-4.9.1-9.7 [ 190s] /bin/rpm.orig-arm already present - skipping. [ 190s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 190s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 190s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 190s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 190s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 190s] [144/144] installing rpm-build-x86-arm-4.9.1-9.7 [ 190s] /usr/bin/rpmbuild [ 190s] /usr/lib/rpm/debugedit [ 191s] now finalizing build dir... [ 191s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 194s] build target is armv7l-tizen-linux [ 194s] ----------------------------------------------------------------- [ 194s] I have the following modifications for libpciaccess.spec: [ 194s] 6c6 [ 194s] < Release: 1 [ 194s] --- [ 194s] > Release: 1.7 [ 194s] ----------------------------------------------------------------- [ 194s] ----- building libpciaccess.spec (user abuild) [ 194s] ----------------------------------------------------------------- [ 194s] ----------------------------------------------------------------- [ 194s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w15.vlan200.tizendev.org/Tizen:2.2:Main/standard/a827f8fb745c62213a7b0efd31201968-libpciaccess' /home/abuild/rpmbuild/SOURCES/libpciaccess.spec [ 194s] Building target platforms: armv7l-tizen-linux [ 194s] Building for target armv7l-tizen-linux [ 194s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Tarvyf [ 194s] + umask 022 [ 194s] + cd /home/abuild/rpmbuild/BUILD [ 194s] + LANG=C [ 194s] + export LANG [ 194s] + unset DISPLAY [ 194s] + cd /home/abuild/rpmbuild/BUILD [ 194s] + rm -rf libpciaccess-0.13.1 [ 194s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libpciaccess-0.13.1.tar.gz [ 194s] + /bin/tar -xf - [ 194s] + STATUS=0 [ 194s] + '[' 0 -ne 0 ']' [ 194s] + cd libpciaccess-0.13.1 [ 194s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 194s] + exit 0 [ 194s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.aVsXHN [ 194s] + umask 022 [ 194s] + cd /home/abuild/rpmbuild/BUILD [ 194s] + cd libpciaccess-0.13.1 [ 194s] + LANG=C [ 194s] + export LANG [ 194s] + unset DISPLAY [ 194s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 194s] + export CFLAGS [ 194s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 194s] + export CXXFLAGS [ 194s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 194s] + export FFLAGS [ 194s] + LD_AS_NEEDED=1 [ 194s] + export LD_AS_NEEDED [ 194s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 194s] + export CFLAGS [ 194s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 194s] + export CXXFLAGS [ 194s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 194s] + export FFLAGS [ 194s] + autoreconf -v --install --force [ 198s] autoreconf: Entering directory `.' [ 198s] autoreconf: configure.ac: not using Gettext [ 199s] autoreconf: running: aclocal --force -I m4 [ 220s] autoreconf: configure.ac: tracing [ 227s] autoreconf: running: libtoolize --copy --force [ 227s] libtoolize: putting auxiliary files in `.'. [ 227s] libtoolize: copying file `./ltmain.sh' [ 227s] libtoolize: putting macros in `m4'. [ 227s] libtoolize: copying file `m4/libtool.m4' [ 227s] libtoolize: copying file `m4/ltoptions.m4' [ 227s] libtoolize: copying file `m4/ltsugar.m4' [ 227s] libtoolize: copying file `m4/ltversion.m4' [ 227s] libtoolize: copying file `m4/lt~obsolete.m4' [ 227s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 227s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 248s] autoreconf: running: /usr/bin/autoconf --force [ 259s] autoreconf: running: /usr/bin/autoheader --force [ 267s] autoreconf: running: automake --add-missing --copy --force-missing [ 271s] configure.ac:37: installing `./config.guess' [ 271s] configure.ac:37: installing `./config.sub' [ 271s] configure.ac:32: installing `./install-sh' [ 271s] configure.ac:32: installing `./missing' [ 273s] scanpci/Makefile.am: installing `./depcomp' [ 275s] autoreconf: Leaving directory `.' [ 275s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --with-pciids-path=/usr/share/misc --with-zlib 'LDFLAGS= -Wl,--hash-style=both -Wl,--as-needed' [ 275s] checking for a BSD-compatible install... /usr/bin/install -c [ 276s] checking whether build environment is sane... yes [ 276s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 276s] checking for gawk... gawk [ 276s] checking whether make sets $(MAKE)... yes [ 276s] checking whether to enable maintainer-specific portions of Makefiles... no [ 276s] checking for style of include used by make... GNU [ 276s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 276s] checking for gcc... gcc [ 278s] checking whether the C compiler works... yes [ 278s] checking for C compiler default output file name... a.out [ 278s] checking for suffix of executables... [ 280s] checking whether we are cross compiling... no [ 281s] checking for suffix of object files... o [ 281s] checking whether we are using the GNU C compiler... yes [ 281s] checking whether gcc accepts -g... yes [ 281s] checking for gcc option to accept ISO C89... none needed [ 282s] checking dependency style of gcc... gcc3 [ 283s] checking how to run the C preprocessor... gcc -E [ 283s] checking for grep that handles long lines and -e... /bin/grep [ 283s] checking for egrep... /bin/grep -E [ 283s] checking for ANSI C header files... yes [ 283s] checking for sys/types.h... yes [ 283s] checking for sys/stat.h... yes [ 283s] checking for stdlib.h... yes [ 284s] checking for string.h... yes [ 284s] checking for memory.h... yes [ 284s] checking for strings.h... yes [ 284s] checking for inttypes.h... yes [ 284s] checking for stdint.h... yes [ 284s] checking for unistd.h... yes [ 284s] checking minix/config.h usability... no [ 284s] checking minix/config.h presence... no [ 284s] checking for minix/config.h... no [ 284s] checking whether it is safe to define __EXTENSIONS__... yes [ 284s] checking build system type... armv7l-unknown-linux-gnueabi [ 284s] checking host system type... armv7l-unknown-linux-gnueabi [ 284s] checking for a sed that does not truncate output... /bin/sed [ 284s] checking for fgrep... /bin/grep -F [ 284s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 284s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 284s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 284s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 284s] checking whether ln -s works... yes [ 284s] checking the maximum length of command line arguments... 1572864 [ 284s] checking whether the shell understands some XSI constructs... yes [ 284s] checking whether the shell understands "+="... yes [ 284s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 284s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 284s] checking for objdump... objdump [ 284s] checking how to recognize dependent libraries... pass_all [ 284s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 284s] checking for ar... ar [ 284s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 284s] checking for strip... strip [ 284s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 284s] checking for ranlib... ranlib [ 284s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 284s] checking for dlfcn.h... yes [ 284s] checking for objdir... .libs [ 284s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 284s] checking for gcc option to produce PIC... -fPIC -DPIC [ 284s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 284s] checking if gcc static flag -static works... no [ 284s] checking if gcc supports -c -o file.o... yes [ 284s] checking if gcc supports -c -o file.o... (cached) yes [ 284s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 284s] checking whether -lc should be explicitly linked in... no [ 284s] checking dynamic linker characteristics... GNU/Linux ld.so [ 284s] checking how to hardcode library paths into programs... immediate [ 284s] checking whether stripping libraries is possible... yes [ 284s] checking if libtool supports shared libraries... yes [ 284s] checking whether to build shared libraries... yes [ 284s] checking whether to build static libraries... no [ 285s] checking for gcc option to accept ISO C99... -std=gnu99 [ 285s] checking whether __clang__ is declared... no [ 285s] checking whether __INTEL_COMPILER is declared... no [ 285s] checking whether __SUNPRO_C is declared... no [ 285s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 285s] checking for pkg-config... /usr/bin/pkg-config [ 285s] checking pkg-config is at least version 0.9.0... yes [ 285s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 285s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 285s] checking if gcc -std=gnu99 supports-Wall... yes [ 285s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 285s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 285s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 285s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 285s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 285s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 285s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 285s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 285s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 285s] checking if gcc -std=gnu99 supports-Wunused... yes [ 285s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 285s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 285s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 285s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 285s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 285s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 285s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 286s] checking if gcc -std=gnu99 supports-pedantic... yes [ 286s] checking if gcc -std=gnu99 supports-Werror... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 286s] checking for gzopen in -lz... yes [ 286s] checking zlib.h usability... yes [ 286s] checking zlib.h presence... yes [ 286s] checking for zlib.h... yes [ 286s] checking for special C compiler options needed for large files... no [ 286s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 286s] checking err.h usability... yes [ 286s] checking err.h presence... yes [ 286s] checking for err.h... yes [ 286s] checking asm/mtrr.h usability... no [ 286s] checking asm/mtrr.h presence... no [ 286s] checking for asm/mtrr.h... no [ 286s] checking for struct pci_io.pi_sel.pc_domain... no [ 286s] configure: creating ./config.status [ 287s] config.status: creating Makefile [ 287s] config.status: creating include/Makefile [ 287s] config.status: creating man/Makefile [ 287s] config.status: creating src/Makefile [ 287s] config.status: creating scanpci/Makefile [ 287s] config.status: creating pciaccess.pc [ 287s] config.status: creating config.h [ 287s] config.status: executing depfiles commands [ 287s] config.status: executing libtool commands [ 287s] + make -j4 [ 287s] make all-recursive [ 287s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1' [ 287s] Making all in include [ 287s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/include' [ 287s] make[2]: Nothing to be done for `all'. [ 287s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/include' [ 287s] Making all in man [ 287s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/man' [ 287s] GEN scanpci.1 [ 287s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/man' [ 287s] Making all in src [ 287s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/src' [ 287s] CC common_bridge.lo [ 287s] CC common_iterator.lo [ 287s] CC common_interface.lo [ 287s] CC common_init.lo [ 287s] common_init.c: In function 'pci_system_cleanup': [ 287s] common_init.c:101:3: warning: 'pci_device_unmap_region' is deprecated (declared at ../include/pciaccess.h:88) [ 287s] common_init.c:104:6: warning: cast discards qualifiers from pointer target type [ 287s] common_init.c:105:6: warning: cast discards qualifiers from pointer target type [ 287s] CC common_io.lo [ 287s] CC common_capability.lo [ 287s] CC common_device_name.lo [ 287s] CC common_map.lo [ 287s] CC common_vgaarb.lo [ 287s] CC linux_sysfs.lo [ 287s] CC linux_devmem.lo [ 287s] linux_sysfs.c: In function 'pci_device_linux_sysfs_map_range': [ 287s] linux_sysfs.c:540:9: warning: unused variable 'err' [ 287s] linux_sysfs.c: In function 'pci_device_linux_sysfs_write8': [ 287s] linux_sysfs.c:875:8: warning: ignoring return value of 'pwrite', declared with attribute warn_unused_result [ 287s] linux_sysfs.c: In function 'pci_device_linux_sysfs_write16': [ 287s] linux_sysfs.c:865:8: warning: ignoring return value of 'pwrite', declared with attribute warn_unused_result [ 287s] linux_sysfs.c: In function 'pci_device_linux_sysfs_write32': [ 287s] linux_sysfs.c:855:8: warning: ignoring return value of 'pwrite', declared with attribute warn_unused_result [ 287s] linux_sysfs.c: In function 'pci_device_linux_sysfs_read8': [ 287s] linux_sysfs.c:843:7: warning: ignoring return value of 'pread', declared with attribute warn_unused_result [ 287s] linux_sysfs.c: In function 'pci_device_linux_sysfs_read16': [ 287s] linux_sysfs.c:830:7: warning: ignoring return value of 'pread', declared with attribute warn_unused_result [ 287s] linux_sysfs.c: In function 'pci_device_linux_sysfs_read32': [ 287s] linux_sysfs.c:817:7: warning: ignoring return value of 'pread', declared with attribute warn_unused_result [ 287s] linux_sysfs.c: In function 'pci_device_linux_sysfs_enable': [ 287s] linux_sysfs.c:694:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [ 287s] linux_sysfs.c: In function 'pci_device_linux_sysfs_read_rom': [ 287s] linux_sysfs.c:338:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [ 287s] linux_sysfs.c:357:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [ 287s] CCLD libpciaccess.la [ 288s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/src' [ 288s] Making all in scanpci [ 288s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/scanpci' [ 288s] CC scanpci.o [ 288s] CCLD scanpci [ 288s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/scanpci' [ 288s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1' [ 288s] make[2]: Nothing to be done for `all-am'. [ 288s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1' [ 288s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1' [ 288s] + exit 0 [ 288s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.vLD2H1 [ 288s] + umask 022 [ 288s] + cd /home/abuild/rpmbuild/BUILD [ 288s] + cd libpciaccess-0.13.1 [ 288s] + LANG=C [ 288s] + export LANG [ 288s] + unset DISPLAY [ 288s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm [ 288s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm [ 288s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm [ 288s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/share/license [ 288s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/share/license/libpciaccess [ 288s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm [ 288s] Making install in include [ 288s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/include' [ 288s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/include' [ 288s] make[2]: Nothing to be done for `install-exec-am'. [ 288s] test -z "/usr/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/include" [ 288s] /usr/bin/install -c -m 644 pciaccess.h '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/include' [ 288s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/include' [ 288s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/include' [ 288s] Making install in man [ 288s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/man' [ 288s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/man' [ 288s] make[2]: Nothing to be done for `install-exec-am'. [ 288s] make[2]: Nothing to be done for `install-data-am'. [ 288s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/man' [ 288s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/man' [ 288s] Making install in src [ 288s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/src' [ 288s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/src' [ 288s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/lib" [ 288s] /bin/sh ../libtool --mode=install /usr/bin/install -c libpciaccess.la '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/lib' [ 288s] libtool: install: /usr/bin/install -c .libs/libpciaccess.so.0.11.1 /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/lib/libpciaccess.so.0.11.1 [ 288s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/lib && { ln -s -f libpciaccess.so.0.11.1 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.11.1 libpciaccess.so.0; }; }) [ 288s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/lib && { ln -s -f libpciaccess.so.0.11.1 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.11.1 libpciaccess.so; }; }) [ 288s] libtool: install: /usr/bin/install -c .libs/libpciaccess.lai /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/lib/libpciaccess.la [ 288s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 288s] make[2]: Nothing to be done for `install-data-am'. [ 288s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/src' [ 288s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/src' [ 288s] Making install in scanpci [ 288s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/scanpci' [ 288s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/scanpci' [ 288s] make[2]: Nothing to be done for `install-exec-am'. [ 288s] make[2]: Nothing to be done for `install-data-am'. [ 288s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/scanpci' [ 288s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1/scanpci' [ 288s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1' [ 288s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1' [ 288s] make[2]: Nothing to be done for `install-exec-am'. [ 288s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/lib/pkgconfig" [ 288s] /usr/bin/install -c -m 644 pciaccess.pc '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/lib/pkgconfig' [ 288s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1' [ 288s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1' [ 288s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm//usr/lib/libpciaccess.la [ 288s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/share/info [ 288s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/share/doc [ 288s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/share/doc/libpciaccess [ 288s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/share/gtk-doc [ 288s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/share/man [ 288s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm -regex '.*/man/man./.*.[0-9]' [ 288s] + xargs rm -f -- [ 288s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm -regex '.*/man/../man./.*.[0-9]' [ 288s] + xargs rm -f -- [ 288s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm -regex '.*/man/man./.*.[0-9]pm' [ 288s] + xargs rm -f -- [ 288s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.1 [ 288s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm/usr/lib/libpciaccess.so.0.11.1 [ 288s] symlinked /usr/lib/debug/usr/lib/libpciaccess.so.0.11.1.debug to /usr/lib/debug/usr/lib/libpciaccess.so.0.debug [ 288s] symlinked /usr/lib/debug/usr/lib/libpciaccess.so.0.11.1.debug to /usr/lib/debug/usr/lib/libpciaccess.so.debug [ 288s] 234 blocks [ 288s] + /usr/lib/rpm/check-buildroot [ 288s] + /usr/lib/rpm//brp-compress [ 288s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 288s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 288s] + /usr/lib/rpm/brp-python-bytecompile [ 288s] + /usr/lib/rpm/brp-python-hardlink [ 288s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm [ 288s] Processing files: libpciaccess-0.13.1-1.7.armv7l [ 288s] Provides: libpciaccess.so.0 [ 288s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 288s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 288s] Requires(post): /sbin/ldconfig [ 288s] Requires(postun): /sbin/ldconfig [ 288s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 libz.so.1(ZLIB_1.2.3.3) [ 288s] Processing files: libpciaccess-devel-0.13.1-1.7.armv7l [ 288s] Provides: pkgconfig(pciaccess) = 0.13.1 [ 288s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 288s] Requires: /usr/bin/pkg-config libpciaccess.so.0 [ 288s] Processing files: libpciaccess-debuginfo-0.13.1-1.7.armv7l [ 288s] Processing files: libpciaccess-debugsource-0.13.1-1.7.armv7l [ 288s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm [ 288s] Wrote: /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.1-1.7.src.rpm [ 288s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-0.13.1-1.7.armv7l.rpm [ 288s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-devel-0.13.1-1.7.armv7l.rpm [ 289s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debuginfo-0.13.1-1.7.armv7l.rpm [ 289s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debugsource-0.13.1-1.7.armv7l.rpm [ 289s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.H2kDSF [ 289s] + umask 022 [ 289s] + cd /home/abuild/rpmbuild/BUILD [ 289s] + cd libpciaccess-0.13.1 [ 289s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm [ 289s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.1-1.7.arm [ 289s] + exit 0 [ 289s] ... checking for files with abuild user/group [ 289s] ... creating baselibs [ 290s] ... comparing built packages with the former built [ 290s] /usr/lib/build/rpm-check.sh [ 290s] compare /.build.oldpackages/libpciaccess-0.13.1-1.6.src.rpm /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.1-1.7.src.rpm [ 290s] compare /.build.oldpackages/libpciaccess-0.13.1-1.6.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-0.13.1-1.7.armv7l.rpm [ 290s] --- /tmp/tmp.8QANjX4UTT 2013-11-07 08:37:38.486177171 +0000 [ 291s] +++ /tmp/tmp.Bqo3qnNuJ4 2013-11-07 08:37:38.498177171 +0000 [ 291s] @@ -2,7 +2,7 @@ [ 291s] PCI access library [ 291s] libpciaccess is a library for portable PCI access routines across multiple [ 291s] operating systems. [ 291s] - tizen Tizen:2.2:Main obs://w17.vlan200.tizendev.org/Tizen:2.2:Main/standard/a827f8fb745c62213a7b0efd31201968-libpciaccess MIT MIT [ 291s] + tizen Tizen:2.2:Main obs://w15.vlan200.tizendev.org/Tizen:2.2:Main/standard/a827f8fb745c62213a7b0efd31201968-libpciaccess MIT MIT [ 291s] System Environment/Libraries http://gitweb.freedesktop.org/?p=xorg/lib/libpciaccess.git (none) (none) (none) [ 291s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 291s] cpio gzip 9 [ 291s] RPM meta information is different [ 291s] compare /.build.oldpackages/libpciaccess-debuginfo-0.13.1-1.6.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debuginfo-0.13.1-1.7.armv7l.rpm [ 291s] --- /tmp/tmp.oV0AkUbVEX 2013-11-07 08:37:39.122177163 +0000 [ 291s] +++ /tmp/tmp.WjWSYfpNBh 2013-11-07 08:37:39.134177163 +0000 [ 291s] @@ -3,7 +3,7 @@ [ 291s] This package provides debug information for package libpciaccess. [ 291s] Debug information is useful when developing applications that use this [ 291s] package or when debugging this package. [ 291s] - tizen Tizen:2.2:Main obs://w17.vlan200.tizendev.org/Tizen:2.2:Main/standard/a827f8fb745c62213a7b0efd31201968-libpciaccess MIT MIT [ 291s] + tizen Tizen:2.2:Main obs://w15.vlan200.tizendev.org/Tizen:2.2:Main/standard/a827f8fb745c62213a7b0efd31201968-libpciaccess MIT MIT [ 291s] Development/Debug http://gitweb.freedesktop.org/?p=xorg/lib/libpciaccess.git (none) (none) (none) [ 291s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 291s] cpio gzip 9 [ 291s] RPM meta information is different [ 291s] compare /.build.oldpackages/libpciaccess-debugsource-0.13.1-1.6.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debugsource-0.13.1-1.7.armv7l.rpm [ 291s] --- /tmp/tmp.FR7Rk1ra06 2013-11-07 08:37:39.410177160 +0000 [ 291s] +++ /tmp/tmp.F9yNR7lEnE 2013-11-07 08:37:39.422177160 +0000 [ 291s] @@ -3,7 +3,7 @@ [ 291s] This package provides debug sources for package libpciaccess. [ 291s] Debug sources are useful when developing applications that use this [ 291s] package or when debugging this package. [ 291s] - tizen Tizen:2.2:Main obs://w17.vlan200.tizendev.org/Tizen:2.2:Main/standard/a827f8fb745c62213a7b0efd31201968-libpciaccess MIT MIT [ 291s] + tizen Tizen:2.2:Main obs://w15.vlan200.tizendev.org/Tizen:2.2:Main/standard/a827f8fb745c62213a7b0efd31201968-libpciaccess MIT MIT [ 291s] Development/Debug http://gitweb.freedesktop.org/?p=xorg/lib/libpciaccess.git (none) (none) (none) [ 291s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 291s] cpio gzip 9 [ 291s] RPM meta information is different [ 291s] compare /.build.oldpackages/libpciaccess-devel-0.13.1-1.6.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-devel-0.13.1-1.7.armv7l.rpm [ 292s] --- /tmp/tmp.hhjntjCjwr 2013-11-07 08:37:39.722177156 +0000 [ 292s] +++ /tmp/tmp.1XkaGcvlgj 2013-11-07 08:37:39.730177156 +0000 [ 292s] @@ -1,7 +1,7 @@ [ 292s] libpciaccess-devel 0.13.1 (none) [ 292s] PCI access library development package [ 292s] Development package for libpciaccess. [ 292s] - tizen Tizen:2.2:Main obs://w17.vlan200.tizendev.org/Tizen:2.2:Main/standard/a827f8fb745c62213a7b0efd31201968-libpciaccess MIT MIT [ 292s] + tizen Tizen:2.2:Main obs://w15.vlan200.tizendev.org/Tizen:2.2:Main/standard/a827f8fb745c62213a7b0efd31201968-libpciaccess MIT MIT [ 292s] Development/Libraries http://gitweb.freedesktop.org/?p=xorg/lib/libpciaccess.git (none) (none) (none) [ 292s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 292s] cpio gzip 9 [ 292s] RPM meta information is different [ 292s] ... saving built statistics [ 292s] ... saving built packages [ 292s] /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-0.13.1-1.7.armv7l.rpm [ 292s] /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debuginfo-0.13.1-1.7.armv7l.rpm [ 292s] /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debugsource-0.13.1-1.7.armv7l.rpm [ 292s] /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-devel-0.13.1-1.7.armv7l.rpm [ 292s] /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.1-1.7.src.rpm [ 292s] /home/abuild/rpmbuild/OTHER/_statistics [ 292s] [ 292s] w15 finished "build libpciaccess.spec" at Thu Nov 7 08:37:40 UTC 2013. [ 292s] [ 295s] [ 255.308479] SysRq : Power Off [ 295s] [ 255.315810] Power down. [ 295s] build: extracting built packages... [ 296s] libpciaccess-0.13.1-1.7.armv7l.rpm [ 296s] libpciaccess-debuginfo-0.13.1-1.7.armv7l.rpm [ 296s] libpciaccess-debugsource-0.13.1-1.7.armv7l.rpm [ 296s] libpciaccess-devel-0.13.1-1.7.armv7l.rpm [ 296s] libpciaccess-0.13.1-1.7.src.rpm [ 296s] _statistics