[ 0s] Using BUILD_ROOT=/srv/build/root_7/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_7/root [ 0s] [ 0s] [ 0s] w12 started "build python-pycurl.spec" at Thu Nov 7 08:51:30 UTC 2013. [ 0s] [ 0s] Building python-pycurl for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '002042d8ba2636f848bff5a64cb01c12' [ 0s] [ 0s] processing specfile /srv/build/root_7/.build-srcdir/python-pycurl.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/python-pycurl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/python-pycurl.spec build rpmlint-Factory ... [ 0s] hostname: Name or service not known [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm -> rpm-libs [ 0s] [1/56] preinstalling libgcc... [ 0s] [2/56] preinstalling setup... [ 0s] [3/56] preinstalling filesystem... [ 0s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 2s] [50/56] preinstalling popt-x86-arm... [ 2s] [51/56] preinstalling rpm-libs-x86-arm... [ 3s] [52/56] preinstalling sqlite-x86-arm... [ 3s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] done [ 18s] booting kvm ... [ 18s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_7/root,if=virtio,cache=none -drive file=/srv/build/root_7/root,if=ide,index=0,cache=none -drive file=/srv/build/root_7/swap,if=virtio,cache=none -smp 4 [ 19s] [ 0.000000] tsc: Fast TSC calibration failed [ 20s] doing fast boot [ 20s] Creating device nodes with udev [ 22s] Waiting for device /dev/vda to appear: ok [ 22s] fsck from util-linux 2.21.2 [ 22s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 23s] /dev/vda: clean, 6835/2097152 files, 242146/8388608 blocks [ 23s] fsck succeeded. Mounting root device read-write. [ 23s] Mounting root /dev/vda [ 23s] mount -o rw -t ext4 /dev/vda /root [ 23s] replacing /etc/mtab with symlink to /proc/self/mounts [ 23s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 27s] 2nd stage started in virtual machine [ 27s] machine type: armv7l [ 27s] switching personality to 8... [ 27s] 2nd stage started in virtual machine [ 27s] machine type: armv7l [ 28s] swapon on /dev/vdb [ 28s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 28s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 29s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 30s] logging output to //.build.log... [ 30s] processing specfile /.build-srcdir/python-pycurl.spec ... [ 31s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/python-pycurl.spec build rpmlint-Factory ... [ 39s] running rpm-x86-arm postinstall script [ 40s] /bin/rpm [ 40s] /usr/bin/rpm2cpio [ 40s] /usr/bin/rpmdb [ 40s] /usr/bin/rpmquery [ 40s] /usr/bin/rpmsign [ 40s] /usr/bin/rpmverify [ 40s] running rpm-libs-x86-arm postinstall script [ 40s] running tizen-accelerator postinstall script [ 40s] running bash-x86-arm postinstall script [ 40s] initializing rpm db... [ 45s] [1/150] installing kernel-headers-3.0.15-1.10 [ 45s] [2/150] installing tizen-release-2.2.0-1.9 [ 45s] [3/150] installing tzdata-2011h-1.10 [ 45s] [4/150] installing libgcc-4.5.3-2.33 [ 46s] [5/150] installing setup-0.1-2.6 [ 46s] [6/150] installing filesystem-0.1-1.9 [ 46s] warning: group lock does not exist - using root [ 46s] warning: group mail does not exist - using root [ 46s] [7/150] installing eglibc-2.13-2.18 [ 47s] [8/150] installing libstdc++-4.5.3-2.33 [ 48s] [9/150] installing eglibc-common-2.13-2.18 [ 50s] /var/tmp/rpm-tmp.4hUoIU: line 2: /usr/bin/xargs: No such file or directory [ 50s] [10/150] installing libstdc++-devel-4.5.3-2.33 [ 50s] [11/150] installing bash-4.1-4.9 [ 50s] [12/150] installing bzip2-libs-1.0.5-5.12 [ 50s] [13/150] installing c-ares-1.7.4-3.22 [ 50s] [14/150] installing cpio-2.8-4.8 [ 51s] [15/150] installing diffutils-3.0-4.8 [ 51s] [16/150] installing e2fsprogs-libs-1.41.9-3.8 [ 51s] [17/150] installing elfutils-libelf-0.152-2.16 [ 51s] [18/150] installing fdupes-1.40-42.10 [ 51s] [19/150] installing findutils-4.2.31-2.8 [ 51s] [20/150] installing gdbm-1.8.3-2.33 [ 51s] [21/150] installing libattr-2.4.44-8.12 [ 51s] [22/150] installing libgomp-4.5.3-2.33 [ 51s] [23/150] installing libidn-1.15-7.29 [ 51s] [24/150] installing liblua-5.1.4-7.7 [ 52s] [25/150] installing libuuid-2.20.2-7.7 [ 52s] [26/150] installing lzo-2.03-2.18 [ 52s] [27/150] installing m4-1.4.14-1.9 [ 52s] [28/150] installing make-3.81-1.12 [ 52s] [29/150] installing net-tools-1.60-88.9 [ 52s] [30/150] installing nspr-4.8.7-1.17 [ 52s] [31/150] installing nss-softokn-freebl-3.12.9-3.28 [ 52s] [32/150] installing patch-2.6.1.169-1.9 [ 52s] [33/150] installing pkgconfig-0.25-3.11 [ 52s] [34/150] installing popt-1.16-4.11 [ 53s] [35/150] installing readline-5.2-14.7 [ 53s] [36/150] installing sed-4.1.5-3.8 [ 53s] [37/150] installing sqlite-3.7.13-1.12 [ 53s] [38/150] installing xz-libs-5.0.3-2.17 [ 53s] [39/150] installing zlib-1.2.5-3.18 [ 53s] [40/150] installing gmp-5.0.1-2.16 [ 53s] [41/150] installing libpcre-7.7-4.44 [ 53s] [42/150] installing ncurses-libs-5.7-4.11 [ 53s] [43/150] installing build-compare-2009.10.14-26.14 [ 54s] [44/150] installing qemu.x86_64-1.2-2.10 [ 57s] [45/150] installing c-ares-devel-1.7.4-3.22 [ 57s] [46/150] installing eglibc-headers-2.13-2.18 [ 58s] [47/150] installing libcap-2.21-2.10 [ 58s] [48/150] installing unzip-6.0-10.16 [ 58s] [49/150] installing zlib-devel-1.2.5-3.18 [ 59s] [50/150] installing grep-2.5.1a-63.9 [ 59s] [51/150] installing libacl-2.2.49-3.12 [ 59s] [52/150] installing libfile-5.04-2.11 [ 59s] [53/150] installing libpython-2.7.1-2.9 [ 59s] [54/150] installing lzo-minilzo-2.03-2.18 [ 59s] [55/150] installing mpfr-3.0.0-1.16 [ 60s] [56/150] installing ncurses-5.7-4.11 [ 60s] [57/150] installing binutils-2.22-1.12 [ 60s] [58/150] installing bzip2-1.0.5-5.12 [ 60s] [59/150] installing libblkid-2.20.2-7.7 [ 60s] [60/150] installing xz-5.0.3-2.17 [ 60s] [61/150] installing elfutils-libs-0.152-2.16 [ 61s] [62/150] installing nss-3.12.9-3.28 [ 61s] [63/150] installing perl-5.12.1-62.7 [ 63s] [64/150] installing ncurses-base-5.7-4.11 [ 63s] [65/150] installing perl-HTML-Tagset-3.20-8.2 [ 63s] [66/150] installing perl-IO-Compress-Base-2.008-62.7 [ 63s] [67/150] installing perl-Module-Pluggable-3.60-62.7 [ 63s] [68/150] installing perl-Pod-Escapes-1.04-62.7 [ 63s] [69/150] installing perl-TimeDate-1.20-1.2 [ 63s] [70/150] installing eglibc-devel-2.13-2.18 [ 63s] [71/150] installing lzo-devel-2.03-2.18 [ 63s] [72/150] installing perl-Compress-Raw-Zlib-2.008-62.7 [ 63s] [73/150] installing perl-devel-5.12.1-62.7 [ 63s] [74/150] installing perl-libs-5.12.1-62.7 [ 64s] [75/150] installing tar-1.17-5.11 [ 64s] [76/150] installing coreutils-6.9-9.12 [ 64s] [77/150] installing file-5.04-2.11 [ 64s] [78/150] installing libmount-2.20.2-7.7 [ 64s] [79/150] installing mpc-0.9-1.16 [ 64s] [80/150] installing openssl-1.0.1c-2.26 [ 64s] [81/150] installing xz-lzma-compat-5.0.3-2.17 [ 64s] [82/150] installing elfutils-0.152-2.16 [ 64s] [83/150] installing nss-sysinit-3.12.9-3.28 [ 65s] [84/150] installing python-base-2.7.1-2.9 [ 65s] [85/150] installing openssl-devel-1.0.1c-2.26 [ 65s] [86/150] installing perl-ExtUtils-ParseXS-2.18-62.7 [ 65s] [87/150] installing perl-Pod-Simple-3.07-62.7 [ 65s] [88/150] installing perl-Test-Simple-0.80-62.7 [ 66s] [89/150] installing tizen-accelerator-1.0.1-1.14 [ 66s] [90/150] installing libidn-devel-1.15-7.29 [ 66s] [91/150] installing perl-IO-Compress-Zlib-2.008-62.7 [ 66s] [92/150] installing perl-Test-Harness-3.12-62.7 [ 66s] [93/150] installing gawk-3.1.5-2.9 [ 66s] [94/150] installing gzip-1.3.14-3.8 [ 66s] [95/150] installing build-2011.01.10a-1.9 [ 66s] [96/150] installing python-devel-2.7.1-2.9 [ 67s] [97/150] installing libcurl-7.28.1-3.26 [ 67s] [98/150] installing cpp-4.5.3-2.33 [ 67s] [99/150] installing util-linux-2.20.2-7.7 [ 67s] warning: group tty does not exist - using root [ 67s] /bin/chown: `root:root': invalid user [ 67s] [100/150] installing bzip2-libs-x86-arm-1.0.5-9.7 [ 68s] [101/150] installing eglibc-x86-arm-2.13-9.7 [ 68s] [102/150] installing elfutils-libelf-x86-arm-0.152-9.7 [ 68s] [103/150] installing elfutils-libs-x86-arm-0.152-9.7 [ 68s] [104/150] installing gmp-x86-arm-5.0.1-9.7 [ 69s] [105/150] installing libacl-x86-arm-2.2.49-9.7 [ 69s] [106/150] installing libattr-x86-arm-2.4.44-9.7 [ 69s] [107/150] installing libcap-x86-arm-2.21-9.6 [ 69s] [108/150] installing libfile-x86-arm-5.04-9.7 [ 69s] [109/150] installing libgcc-x86-arm-4.5.3-9.7 [ 70s] [110/150] installing liblua-x86-arm-5.1.4-9.7 [ 70s] [111/150] installing mpc-x86-arm-0.9-9.7 [ 70s] [112/150] installing mpfr-x86-arm-3.0.0-9.7 [ 70s] [113/150] installing ncurses-libs-x86-arm-5.7-9.6 [ 70s] [114/150] installing nspr-x86-arm-4.8.7-9.7 [ 70s] [115/150] installing nss-softokn-freebl-x86-arm-3.12.9-9.7 [ 71s] [116/150] installing nss-x86-arm-3.12.9-9.7 [ 71s] [117/150] installing perl-ExtUtils-MakeMaker-6.36-62.7 [ 71s] [118/150] installing popt-x86-arm-1.16-9.7 [ 71s] [119/150] installing sqlite-x86-arm-3.7.13-9.6 [ 71s] [120/150] installing xz-libs-x86-arm-5.0.3-9.7 [ 72s] [121/150] installing zlib-x86-arm-1.2.5-7.6 [ 72s] [122/150] installing libcurl-devel-7.28.1-3.26 [ 72s] [123/150] installing curl-7.28.1-3.26 [ 72s] [124/150] installing gcc-4.5.3-2.33 [ 72s] [125/150] installing perl-CPAN-1.9205-62.7 [ 72s] [126/150] installing bash-x86-arm-4.1-7.7 [ 73s] [127/150] installing fdupes-x86-arm-1.40-9.7 [ 73s] [128/150] installing findutils-x86-arm-4.2.31-7.7 [ 73s] [129/150] installing gawk-x86-arm-3.1.5-7.7 [ 73s] [130/150] installing gzip-x86-arm-1.3.14-9.7 [ 73s] [131/150] installing make-x86-arm-3.81-8.6 [ 73s] [132/150] installing patch-x86-arm-2.6.1.169-7.7 [ 74s] [133/150] installing sed-x86-arm-4.1.5-9.7 [ 74s] /bin/sed.orig-arm already present - skipping. [ 74s] [134/150] installing diffutils-x86-arm-3.0-9.7 [ 74s] /usr/bin/cmp.orig-arm already present - skipping. [ 74s] /usr/bin/diff.orig-arm already present - skipping. [ 74s] /usr/bin/diff3.orig-arm already present - skipping. [ 74s] /usr/bin/sdiff.orig-arm already present - skipping. [ 74s] [135/150] installing autoconf-2.68-1.9 [ 74s] [136/150] installing coreutils-x86-arm-6.9-7.7 [ 76s] [137/150] installing file-x86-arm-5.04-7.7 [ 77s] [138/150] installing tar-x86-arm-1.17-9.6 [ 77s] /bin/tar.orig-arm already present - skipping. [ 77s] [139/150] installing elfutils-x86-arm-0.152-7.8 [ 77s] [140/150] installing gcc-c++-4.5.3-2.33 [ 77s] [141/150] installing rpm-4.9.1-4.12 [ 78s] [142/150] installing automake-1.11.1-3.12 [ 78s] [143/150] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 79s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 79s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 79s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 79s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 79s] [144/150] installing rpm-libs-4.9.1-4.12 [ 79s] [145/150] installing rpm-libs-x86-arm-4.9.1-10.7 [ 79s] [146/150] installing libtool-2.2.6b-2.15 [ 79s] [147/150] installing cross-armv7l-binutils-accel-armv7l-2.22-1.6 [ 80s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 80s] [148/150] installing rpm-build-4.9.1-4.12 [ 80s] [149/150] installing rpm-x86-arm-4.9.1-9.7 [ 80s] /bin/rpm.orig-arm already present - skipping. [ 80s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 80s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 80s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 80s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 80s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 80s] [150/150] installing rpm-build-x86-arm-4.9.1-9.7 [ 80s] /usr/bin/rpmbuild [ 80s] /usr/lib/rpm/debugedit [ 80s] now finalizing build dir... [ 81s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 81s] Warning: spec file parser line 30: can't expand %(...) [ 81s] Warning: spec file parser line 66: can't expand %(...) [ 81s] Warning: spec file parser line 67: can't expand %(...) [ 84s] build target is armv7l-tizen-linux [ 84s] ----------------------------------------------------------------- [ 84s] I have the following modifications for python-pycurl.spec: [ 84s] 5c5 [ 84s] < Release: 4 [ 84s] --- [ 84s] > Release: 4.8 [ 84s] 67a68 [ 84s] > %changelog [ 84s] ----------------------------------------------------------------- [ 84s] ----- building python-pycurl.spec (user abuild) [ 84s] ----------------------------------------------------------------- [ 84s] ----------------------------------------------------------------- [ 84s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w12.vlan200.tizendev.org/Tizen:2.2:Main/standard/002042d8ba2636f848bff5a64cb01c12-python-pycurl' /home/abuild/rpmbuild/SOURCES/python-pycurl.spec [ 85s] Building target platforms: armv7l-tizen-linux [ 85s] Building for target armv7l-tizen-linux [ 85s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.6gQ7Jt [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + LANG=C [ 85s] + export LANG [ 85s] + unset DISPLAY [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + rm -rf python-pycurl-7.19.0 [ 85s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python-pycurl-7.19.0.tar.gz [ 85s] + /bin/tar -xf - [ 85s] + STATUS=0 [ 85s] + '[' 0 -ne 0 ']' [ 85s] + cd python-pycurl-7.19.0 [ 85s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 85s] + echo 'Patch #0 (python-pycurl-no-static-libs.patch):' [ 85s] Patch #0 (python-pycurl-no-static-libs.patch): [ 85s] + /bin/cat /home/abuild/rpmbuild/SOURCES/python-pycurl-no-static-libs.patch [ 85s] + /usr/bin/patch -s -p0 --fuzz=2 [ 85s] + echo 'Patch #1 (python-pycurl-lcrypto.patch):' [ 85s] Patch #1 (python-pycurl-lcrypto.patch): [ 85s] + /bin/cat /home/abuild/rpmbuild/SOURCES/python-pycurl-lcrypto.patch [ 85s] + /usr/bin/patch -s -p1 -b --suffix .lcrypto --fuzz=2 [ 85s] + chmod a-x examples/basicfirst.py examples/file_upload.py examples/linksys.py examples/retriever-multi.py examples/retriever.py examples/sfquery.py examples/xmlrpc_curl.py [ 85s] + exit 0 [ 85s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.chBd6x [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + cd python-pycurl-7.19.0 [ 85s] + LANG=C [ 85s] + export LANG [ 85s] + unset DISPLAY [ 85s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 85s] + export CFLAGS [ 85s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 85s] + export CXXFLAGS [ 85s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 85s] + export FFLAGS [ 85s] + LD_AS_NEEDED=1 [ 85s] + export LD_AS_NEEDED [ 85s] + cp /home/abuild/rpmbuild/SOURCES/python-pycurl.manifest . [ 85s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DHAVE_CURL_OPENSSL' [ 85s] + /usr/bin/python setup.py build [ 85s] Using curl-config (libcurl 7.28.1) [ 85s] running build [ 85s] running build_py [ 85s] creating build [ 85s] creating build/lib.linux-armv7l-2.7 [ 85s] creating build/lib.linux-armv7l-2.7/curl [ 85s] copying python/curl/__init__.py -> build/lib.linux-armv7l-2.7/curl [ 85s] running build_ext [ 85s] building 'pycurl' extension [ 85s] creating build/temp.linux-armv7l-2.7 [ 85s] creating build/temp.linux-armv7l-2.7/src [ 85s] gcc -pthread -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DHAVE_CURL_OPENSSL -fPIC -DHAVE_CURL_OPENSSL=1 -DHAVE_CURL_OPENSSL=1 -DHAVE_CURL_SSL=1 -I/usr/include/python2.7 -c src/pycurl.c -o build/temp.linux-armv7l-2.7/src/pycurl.o [ 86s] src/pycurl.c: In function 'do_multi_info_read': [ 86s] src/pycurl.c:2843:15: warning: call to '_curl_easy_getinfo_err_string' declared with attribute warning: curl_easy_getinfo expects a pointer to char * for this info [ 86s] In function 'util_curl_unsetopt', [ 86s] inlined from 'do_curl_unsetopt' at src/pycurl.c:1551:5: [ 86s] src/pycurl.c:1476:9: warning: call to '_curl_easy_setopt_err_CURLSH' declared with attribute warning: curl_easy_setopt expects a CURLSH* argument for this option [ 86s] src/pycurl.c: In function 'multi_socket_callback': [ 86s] src/pycurl.c:2355:11: warning: call to '_curl_easy_getinfo_err_string' declared with attribute warning: curl_easy_getinfo expects a pointer to char * for this info [ 86s] gcc -pthread -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DHAVE_CURL_OPENSSL build/temp.linux-armv7l-2.7/src/pycurl.o -L/usr/lib -lcurl -lcares -lidn -lssl -lcrypto -lrt -lssl -lcrypto -lz -lcrypto -lpython2.7 -o build/lib.linux-armv7l-2.7/pycurl.so [ 87s] + exit 0 [ 87s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.kUX8OJ [ 87s] + umask 022 [ 87s] + cd /home/abuild/rpmbuild/BUILD [ 87s] + cd python-pycurl-7.19.0 [ 87s] + LANG=C [ 87s] + export LANG [ 87s] + unset DISPLAY [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm [ 87s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm [ 87s] + /usr/bin/python setup.py install -O1 --skip-build --root /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm --prefix /usr [ 87s] Using curl-config (libcurl 7.28.1) [ 87s] running install [ 87s] running install_lib [ 87s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm [ 87s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr [ 87s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/lib [ 87s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/lib/python2.7 [ 87s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/lib/python2.7/site-packages [ 87s] copying build/lib.linux-armv7l-2.7/pycurl.so -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/lib/python2.7/site-packages [ 87s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/lib/python2.7/site-packages/curl [ 87s] copying build/lib.linux-armv7l-2.7/curl/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/lib/python2.7/site-packages/curl [ 87s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/lib/python2.7/site-packages/curl/__init__.py to __init__.pyc [ 87s] writing byte-compilation script '/tmp/tmpWafARE.py' [ 87s] /usr/bin/python -O /tmp/tmpWafARE.py [ 88s] removing /tmp/tmpWafARE.py [ 88s] running install_data [ 88s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share [ 88s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc [ 88s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl [ 88s] copying ChangeLog -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl [ 88s] copying COPYING -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl [ 88s] copying COPYING2 -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl [ 88s] copying INSTALL -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl [ 88s] copying README -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl [ 88s] copying TODO -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl [ 88s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/html [ 88s] copying doc/pycurl.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/html [ 88s] copying doc/curlmultiobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/html [ 88s] copying doc/curlobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/html [ 88s] copying doc/curlshareobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/html [ 88s] copying doc/callbacks.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/html [ 88s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/examples [ 88s] copying examples/linksys.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/examples [ 88s] copying examples/retriever.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/examples [ 88s] copying examples/xmlrpc_curl.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/examples [ 88s] copying examples/sfquery.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/examples [ 88s] copying examples/basicfirst.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/examples [ 88s] copying examples/file_upload.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/examples [ 88s] copying examples/retriever-multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/examples [ 88s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_multi5.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_multi4.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_multi3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_xmlrpc.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_multi_vs_thread.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_multi_timer.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_multi_socket.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_stringio.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_socketopen.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_internals.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_memleak.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_multi2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_share.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_post3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_gtk.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_multi6.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_cb.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_multi_socket_select.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_debug.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_post.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_getinfo.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/util.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_ftp.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] copying tests/test_post2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/share/doc/pycurl/tests [ 88s] running install_egg_info [ 88s] Writing /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/lib/python2.7/site-packages/pycurl-7.19.0-py2.7.egg-info [ 88s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/python-pycurl-7.19.0 [ 88s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/lib/python2.7/site-packages/pycurl.so [ 88s] 246 blocks [ 88s] + /usr/lib/rpm/check-buildroot [ 88s] + /usr/lib/rpm//brp-compress [ 88s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 88s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 88s] + /usr/lib/rpm/brp-python-bytecompile [ 88s] Bytecompiling .py files below /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm/usr/lib/python2.7/ using /usr/bin/python2.7 [ 90s] + /usr/lib/rpm/brp-python-hardlink [ 90s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm [ 90s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.mas0ka [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd python-pycurl-7.19.0 [ 90s] + unset DISPLAY [ 90s] + export 'PYTHONPATH=/home/abuild/rpmbuild/BUILD/python-pycurl-7.19.0/build/lib*' [ 90s] + PYTHONPATH='/home/abuild/rpmbuild/BUILD/python-pycurl-7.19.0/build/lib*' [ 90s] + /usr/bin/python tests/test_internals.py -q [ 91s] gc: collectable [ 91s] gc: collectable [ 91s] gc: collectable [ 91s] gc: collectable [ 91s] Python 2.7.1 (r271:86832, Apr 05 2012, 18:44:34) [GCC] [ 91s] PycURL libcurl/7.28.1 OpenSSL/1.0.1c zlib/1.2.5 c-ares/1.7.4 libidn/1.15 (compiled against 0x71c01) [ 91s] PycURL version info (3, '7.28.1', 465921, 'armv7l-unknown-linux-gnueabi', 59100, 'OpenSSL/1.0.1c', 0, '1.2.5', ('dict', 'file', 'ftp', 'ftps', 'gopher', 'http', 'https', 'imap', 'imaps', 'pop3', 'pop3s', 'rtsp', 'smtp', 'smtps', 'telnet', 'tftp'), '1.7.4', 67332, '1.15') [ 91s] build/lib.linux-armv7l-2.7/pycurl.so, compiled Nov 7 2013 08:52:55 [ 91s] All tests passed. [ 91s] + exit 0 [ 91s] Processing files: python-pycurl-7.19.0-4.8.armv7l [ 91s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 91s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 91s] [ 91s] Provides: pycurl = 7.19.0-4.8 pycurl.so [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcares.so.2 libcrypto.so.1.0.0 libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libidn.so.11 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libpython2.7.so.1.0 librt.so.1 libssl.so.1.0.0 libz.so.1 python(abi) = 2.7 [ 91s] Processing files: python-pycurl-debuginfo-7.19.0-4.8.armv7l [ 91s] Processing files: python-pycurl-debugsource-7.19.0-4.8.armv7l [ 91s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm [ 91s] Wrote: /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-4.8.src.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-4.8.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-4.8.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-4.8.armv7l.rpm [ 91s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.0GG2Dz [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd python-pycurl-7.19.0 [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-4.8.arm [ 91s] + exit 0 [ 91s] ... checking for files with abuild user/group [ 92s] ... creating baselibs [ 92s] ... comparing built packages with the former built [ 92s] /usr/lib/build/rpm-check.sh [ 92s] compare /.build.oldpackages/python-pycurl-7.19.0-4.7.src.rpm /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-4.8.src.rpm [ 93s] compare /.build.oldpackages/python-pycurl-7.19.0-4.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-4.8.armv7l.rpm [ 93s] --- /tmp/tmp.lz2s05xW1o 2013-11-07 08:53:02.231318810 +0000 [ 93s] +++ /tmp/tmp.lhAOIUDNxc 2013-11-07 08:53:02.243318810 +0000 [ 93s] @@ -4,7 +4,7 @@ [ 93s] objects identified by a URL from a Python program, similar to the [ 93s] urllib Python module. PycURL is mature, very fast, and supports a lot [ 93s] of features. [ 93s] - tizen Tizen:2.2:Main obs://w05.vlan200.tizendev.org/Tizen:2.2:Main/standard/002042d8ba2636f848bff5a64cb01c12-python-pycurl LGPLv2+ LGPLv2+ [ 93s] + tizen Tizen:2.2:Main obs://w12.vlan200.tizendev.org/Tizen:2.2:Main/standard/002042d8ba2636f848bff5a64cb01c12-python-pycurl LGPLv2+ LGPLv2+ [ 93s] Development/Languages http://pycurl.sourceforge.net/ (none) (none) (none) [ 93s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 93s] cpio gzip 9 [ 93s] RPM meta information is different [ 93s] compare /.build.oldpackages/python-pycurl-debuginfo-7.19.0-4.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-4.8.armv7l.rpm [ 93s] --- /tmp/tmp.TKlrAV74UZ 2013-11-07 08:53:02.287318810 +0000 [ 93s] +++ /tmp/tmp.6qrqYloX8j 2013-11-07 08:53:02.299318810 +0000 [ 93s] @@ -3,7 +3,7 @@ [ 93s] This package provides debug information for package python-pycurl. [ 93s] Debug information is useful when developing applications that use this [ 93s] package or when debugging this package. [ 93s] - tizen Tizen:2.2:Main obs://w05.vlan200.tizendev.org/Tizen:2.2:Main/standard/002042d8ba2636f848bff5a64cb01c12-python-pycurl LGPLv2+ LGPLv2+ [ 93s] + tizen Tizen:2.2:Main obs://w12.vlan200.tizendev.org/Tizen:2.2:Main/standard/002042d8ba2636f848bff5a64cb01c12-python-pycurl LGPLv2+ LGPLv2+ [ 93s] Development/Debug http://pycurl.sourceforge.net/ (none) (none) (none) [ 93s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 93s] cpio gzip 9 [ 93s] RPM meta information is different [ 93s] compare /.build.oldpackages/python-pycurl-debugsource-7.19.0-4.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-4.8.armv7l.rpm [ 93s] --- /tmp/tmp.pyvghCjHG3 2013-11-07 08:53:02.379318809 +0000 [ 93s] +++ /tmp/tmp.x1fNxoe1ZA 2013-11-07 08:53:02.391318809 +0000 [ 93s] @@ -3,7 +3,7 @@ [ 93s] This package provides debug sources for package python-pycurl. [ 93s] Debug sources are useful when developing applications that use this [ 93s] package or when debugging this package. [ 93s] - tizen Tizen:2.2:Main obs://w05.vlan200.tizendev.org/Tizen:2.2:Main/standard/002042d8ba2636f848bff5a64cb01c12-python-pycurl LGPLv2+ LGPLv2+ [ 93s] + tizen Tizen:2.2:Main obs://w12.vlan200.tizendev.org/Tizen:2.2:Main/standard/002042d8ba2636f848bff5a64cb01c12-python-pycurl LGPLv2+ LGPLv2+ [ 93s] Development/Debug http://pycurl.sourceforge.net/ (none) (none) (none) [ 93s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 93s] cpio gzip 9 [ 93s] RPM meta information is different [ 93s] ... saving built statistics [ 93s] ... saving built packages [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-4.8.armv7l.rpm [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-4.8.armv7l.rpm [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-4.8.armv7l.rpm [ 93s] /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-4.8.src.rpm [ 93s] /home/abuild/rpmbuild/OTHER/_statistics [ 93s] [ 93s] w12 finished "build python-pycurl.spec" at Thu Nov 7 08:53:02 UTC 2013. [ 93s] [ 94s] /.build/build: line 368: 227 Killed background_monitor_process [ 96s] [ 77.035495] SysRq : Power Off [ 96s] [ 77.045217] Power down. [ 97s] build: extracting built packages... [ 97s] python-pycurl-7.19.0-4.8.armv7l.rpm [ 97s] python-pycurl-debuginfo-7.19.0-4.8.armv7l.rpm [ 97s] python-pycurl-debugsource-7.19.0-4.8.armv7l.rpm [ 97s] python-pycurl-7.19.0-4.8.src.rpm [ 97s] _statistics