[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w16 started "build sensor.spec" at Thu Nov 7 14:10:52 UTC 2013. [ 0s] [ 0s] Building sensor for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 'ebac229e5b446d7a4f7befe7243d9239' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/sensor.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/sensor.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/sensor.spec build rpmlint-Factory ... [ 0s] hostname: Name or service not known [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm -> rpm-libs [ 0s] [1/56] preinstalling libgcc... [ 0s] [2/56] preinstalling setup... [ 0s] [3/56] preinstalling filesystem... [ 0s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 2s] [50/56] preinstalling popt-x86-arm... [ 2s] [51/56] preinstalling rpm-libs-x86-arm... [ 2s] [52/56] preinstalling sqlite-x86-arm... [ 2s] [53/56] preinstalling xz-libs-x86-arm... [ 2s] [54/56] preinstalling zlib-x86-arm... [ 2s] [55/56] preinstalling bash-x86-arm... [ 2s] [56/56] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: dbus-libs -> dbus [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: systemd -> libudev -> udev [ 3s] breaking dependency systemd -> libudev [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm -> rpm-libs [ 4s] done [ 23s] booting kvm ... [ 23s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 4 [ 37s] doing fast boot [ 38s] Creating device nodes with udev [ 44s] Waiting for device /dev/vda to appear: ok [ 44s] fsck from util-linux 2.21.2 [ 44s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 44s] /dev/vda: clean, 6872/2097152 files, 242785/8388608 blocks [ 44s] fsck succeeded. Mounting root device read-write. [ 44s] Mounting root /dev/vda [ 44s] mount -o rw -t ext4 /dev/vda /root [ 53s] replacing /etc/mtab with symlink to /proc/self/mounts [ 55s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 72s] 2nd stage started in virtual machine [ 73s] machine type: armv7l [ 73s] switching personality to 8... [ 73s] 2nd stage started in virtual machine [ 73s] machine type: armv7l [ 74s] swapon on /dev/vdb [ 74s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 74s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 75s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 75s] logging output to //.build.log... [ 76s] processing specfile /.build-srcdir/sensor.spec ... [ 76s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/sensor.spec build rpmlint-Factory ... [ 93s] running rpm-x86-arm postinstall script [ 94s] /bin/rpm [ 94s] /usr/bin/rpm2cpio [ 95s] /usr/bin/rpmdb [ 95s] /usr/bin/rpmquery [ 95s] /usr/bin/rpmsign [ 95s] /usr/bin/rpmverify [ 95s] running rpm-libs-x86-arm postinstall script [ 95s] running tizen-accelerator postinstall script [ 96s] running bash-x86-arm postinstall script [ 97s] initializing rpm db... [ 104s] [1/170] installing kernel-headers-3.0.15-1.10 [ 104s] [2/170] installing libX11-common-1.5.0-3.4 [ 105s] [3/170] installing tizen-release-2.2.0-1.9 [ 105s] [4/170] installing tzdata-2011h-1.10 [ 105s] [5/170] installing libgcc-4.5.3-2.33 [ 106s] [6/170] installing setup-0.1-2.6 [ 106s] [7/170] installing filesystem-0.1-1.9 [ 110s] warning: group lock does not exist - using root [ 110s] warning: group mail does not exist - using root [ 110s] [8/170] installing eglibc-2.13-2.18 [ 111s] [9/170] installing libstdc++-4.5.3-2.33 [ 111s] [10/170] installing eglibc-common-2.13-2.18 [ 117s] /var/tmp/rpm-tmp.89LK6Z: line 2: /usr/bin/xargs: No such file or directory [ 118s] [11/170] installing libstdc++-devel-4.5.3-2.33 [ 118s] [12/170] installing bash-4.1-4.9 [ 119s] [13/170] installing bzip2-libs-1.0.5-5.12 [ 119s] [14/170] installing c-ares-1.7.4-3.22 [ 119s] [15/170] installing cpio-2.8-4.8 [ 120s] [16/170] installing diffutils-3.0-4.8 [ 120s] [17/170] installing e2fsprogs-libs-1.41.9-3.8 [ 121s] [18/170] installing elfutils-libelf-0.152-2.16 [ 121s] [19/170] installing expat-2.0.1-8.12 [ 121s] [20/170] installing fdupes-1.40-42.10 [ 121s] [21/170] installing findutils-4.2.31-2.8 [ 122s] [22/170] installing gdbm-1.8.3-2.33 [ 122s] [23/170] installing kmod-5-5.1 [ 122s] [24/170] installing libXau-1.0.7-1.8 [ 122s] [25/170] installing libattr-2.4.44-8.12 [ 122s] [26/170] installing libffi-3.0.9-101.1 [ 122s] [27/170] installing libgomp-4.5.3-2.33 [ 123s] [28/170] installing libidn-1.15-7.29 [ 123s] [29/170] installing liblua-5.1.4-7.7 [ 123s] [30/170] installing libuuid-2.20.2-7.7 [ 124s] [31/170] installing lzo-2.03-2.18 [ 124s] [32/170] installing m4-1.4.14-1.9 [ 124s] [33/170] installing make-3.81-1.12 [ 124s] [34/170] installing net-tools-1.60-88.9 [ 124s] [35/170] installing nspr-4.8.7-1.17 [ 125s] [36/170] installing nss-softokn-freebl-3.12.9-3.28 [ 125s] [37/170] installing patch-2.6.1.169-1.9 [ 125s] [38/170] installing pkgconfig-0.25-3.11 [ 125s] [39/170] installing popt-1.16-4.11 [ 125s] [40/170] installing readline-5.2-14.7 [ 125s] [41/170] installing sed-4.1.5-3.8 [ 125s] [42/170] installing smack-1.0slp2+s12-1.11 [ 125s] [43/170] installing sqlite-3.7.13-1.12 [ 125s] [44/170] installing xz-libs-5.0.3-2.17 [ 126s] [45/170] installing zlib-1.2.5-3.18 [ 126s] [46/170] installing gmp-5.0.1-2.16 [ 126s] [47/170] installing libpcre-7.7-4.44 [ 126s] [48/170] installing ncurses-libs-5.7-4.11 [ 126s] [49/170] installing build-compare-2009.10.14-26.14 [ 126s] [50/170] installing qemu.x86_64-1.2-2.10 [ 130s] [51/170] installing vconf-internal-keys-devel-0.0.82-3.1 [ 130s] [52/170] installing eglibc-headers-2.13-2.18 [ 130s] [53/170] installing libcap-2.21-2.10 [ 131s] [54/170] installing unzip-6.0-10.16 [ 131s] [55/170] installing zlib-devel-1.2.5-3.18 [ 131s] [56/170] installing grep-2.5.1a-63.9 [ 132s] [57/170] installing libacl-2.2.49-3.12 [ 132s] [58/170] installing libfile-5.04-2.11 [ 132s] [59/170] installing libxcb-1.8.1-1.7 [ 133s] [60/170] installing libxml2-2.7.8-10.3 [ 133s] [61/170] installing lzo-minilzo-2.03-2.18 [ 133s] [62/170] installing mpfr-3.0.0-1.16 [ 133s] [63/170] installing ncurses-5.7-4.11 [ 134s] [64/170] installing binutils-2.22-1.12 [ 134s] [65/170] installing bzip2-1.0.5-5.12 [ 134s] [66/170] installing glib2-2.32.3-6.3 [ 136s] [67/170] installing libblkid-2.20.2-7.7 [ 137s] [68/170] installing smack-utils-1.0slp2+s12-1.11 [ 137s] [69/170] installing xz-5.0.3-2.17 [ 137s] [70/170] installing elfutils-libs-0.152-2.16 [ 137s] [71/170] installing nss-3.12.9-3.28 [ 137s] [72/170] installing perl-5.12.1-62.8 [ 141s] [73/170] installing ncurses-base-5.7-4.11 [ 141s] [74/170] installing perl-HTML-Tagset-3.20-8.3 [ 141s] [75/170] installing perl-IO-Compress-Base-2.008-62.8 [ 142s] [76/170] installing perl-Module-Pluggable-3.60-62.8 [ 142s] [77/170] installing perl-Pod-Escapes-1.04-62.8 [ 142s] [78/170] installing perl-TimeDate-1.20-1.3 [ 142s] [79/170] installing eglibc-devel-2.13-2.18 [ 142s] [80/170] installing lzo-devel-2.03-2.18 [ 142s] [81/170] installing perl-Compress-Raw-Zlib-2.008-62.8 [ 142s] [82/170] installing perl-devel-5.12.1-62.8 [ 143s] [83/170] installing perl-libs-5.12.1-62.8 [ 143s] [84/170] installing tar-1.17-5.11 [ 143s] [85/170] installing coreutils-6.9-9.12 [ 143s] [86/170] installing file-5.04-2.11 [ 143s] [87/170] installing libX11-1.5.0-3.4 [ 143s] [88/170] installing libdlog-0.4.1-17.4 [ 144s] chown: `root:app_logging': invalid user [ 144s] [89/170] installing libmount-2.20.2-7.7 [ 144s] [90/170] installing mpc-0.9-1.16 [ 144s] [91/170] installing openssl-1.0.1c-2.26 [ 144s] [92/170] installing xz-lzma-compat-5.0.3-2.17 [ 144s] [93/170] installing elfutils-0.152-2.16 [ 144s] [94/170] installing nss-sysinit-3.12.9-3.28 [ 144s] [95/170] installing perl-ExtUtils-ParseXS-2.18-62.8 [ 145s] [96/170] installing perl-Pod-Simple-3.07-62.8 [ 145s] [97/170] installing perl-Test-Simple-0.80-62.8 [ 145s] [98/170] installing tizen-accelerator-1.0.1-1.14 [ 145s] [99/170] installing perl-IO-Compress-Zlib-2.008-62.8 [ 145s] [100/170] installing perl-Test-Harness-3.12-62.8 [ 145s] [101/170] installing gawk-3.1.5-2.9 [ 145s] [102/170] installing gzip-1.3.14-3.8 [ 145s] [103/170] installing libsf-common-0.3.20-2.2 [ 145s] [104/170] installing pam-1.1.5-3.6 [ 146s] [105/170] installing build-2011.01.10a-1.9 [ 146s] [106/170] installing libcurl-7.28.1-3.26 [ 146s] [107/170] installing cpp-4.5.3-2.33 [ 146s] [108/170] installing dbus-1.6.4-7.1 [ 146s] warning: group dbus does not exist - using root [ 146s] [109/170] installing util-linux-2.20.2-7.7 [ 147s] warning: group tty does not exist - using root [ 147s] /bin/chown: `root:root': invalid user [ 147s] [110/170] installing libarchive-2.8.3-3.2 [ 147s] [111/170] installing glib2-devel-2.32.3-6.3 [ 147s] [112/170] installing libsf-common-devel-0.3.20-2.2 [ 147s] [113/170] installing bzip2-libs-x86-arm-1.0.5-9.7 [ 147s] [114/170] installing dbus-libs-1.6.4-7.1 [ 147s] [115/170] installing eglibc-x86-arm-2.13-9.7 [ 148s] [116/170] installing elfutils-libelf-x86-arm-0.152-9.7 [ 148s] [117/170] installing elfutils-libs-x86-arm-0.152-9.7 [ 148s] [118/170] installing gmp-x86-arm-5.0.1-9.7 [ 149s] [119/170] installing libacl-x86-arm-2.2.49-9.7 [ 149s] [120/170] installing libattr-x86-arm-2.4.44-9.7 [ 149s] [121/170] installing libcap-x86-arm-2.21-9.6 [ 149s] [122/170] installing libfile-x86-arm-5.04-9.7 [ 150s] [123/170] installing libgcc-x86-arm-4.5.3-9.7 [ 150s] [124/170] installing liblua-x86-arm-5.1.4-9.7 [ 150s] [125/170] installing mpc-x86-arm-0.9-9.7 [ 150s] [126/170] installing mpfr-x86-arm-3.0.0-9.7 [ 151s] [127/170] installing ncurses-libs-x86-arm-5.7-9.6 [ 151s] [128/170] installing nspr-x86-arm-4.8.7-9.7 [ 151s] [129/170] installing nss-softokn-freebl-x86-arm-3.12.9-9.7 [ 152s] [130/170] installing nss-x86-arm-3.12.9-9.7 [ 152s] [131/170] installing perl-ExtUtils-MakeMaker-6.36-62.8 [ 152s] [132/170] installing popt-x86-arm-1.16-9.7 [ 153s] [133/170] installing sqlite-x86-arm-3.7.13-9.6 [ 154s] [134/170] installing xz-libs-x86-arm-5.0.3-9.7 [ 154s] [135/170] installing zlib-x86-arm-1.2.5-7.6 [ 154s] [136/170] installing curl-7.28.1-3.26 [ 156s] [137/170] installing cmake-2.8.5-1.3 [ 156s] [138/170] installing gcc-4.5.3-2.33 [ 156s] [139/170] installing perl-CPAN-1.9205-62.8 [ 157s] [140/170] installing bash-x86-arm-4.1-7.7 [ 157s] [141/170] installing fdupes-x86-arm-1.40-9.7 [ 157s] [142/170] installing findutils-x86-arm-4.2.31-7.7 [ 157s] [143/170] installing gawk-x86-arm-3.1.5-7.7 [ 158s] [144/170] installing gzip-x86-arm-1.3.14-9.7 [ 158s] [145/170] installing make-x86-arm-3.81-8.6 [ 158s] [146/170] installing patch-x86-arm-2.6.1.169-7.7 [ 158s] [147/170] installing sed-x86-arm-4.1.5-9.7 [ 158s] /bin/sed.orig-arm already present - skipping. [ 158s] [148/170] installing diffutils-x86-arm-3.0-9.7 [ 158s] /usr/bin/cmp.orig-arm already present - skipping. [ 158s] /usr/bin/diff.orig-arm already present - skipping. [ 158s] /usr/bin/diff3.orig-arm already present - skipping. [ 158s] /usr/bin/sdiff.orig-arm already present - skipping. [ 159s] [149/170] installing autoconf-2.68-1.9 [ 159s] [150/170] installing coreutils-x86-arm-6.9-7.7 [ 161s] [151/170] installing file-x86-arm-5.04-7.7 [ 161s] [152/170] installing tar-x86-arm-1.17-9.6 [ 161s] /bin/tar.orig-arm already present - skipping. [ 161s] [153/170] installing elfutils-x86-arm-0.152-7.8 [ 162s] [154/170] installing systemd-43-3.3 [ 162s] [155/170] installing gcc-c++-4.5.3-2.33 [ 162s] [156/170] installing rpm-4.9.1-4.12 [ 162s] [157/170] installing automake-1.11.1-3.12 [ 162s] [158/170] installing vconf-0.2.51-1.4 [ 163s] Failed to get D-Bus connection: No connection to service manager. [ 163s] warning: %post(vconf-0.2.51-1.4.armv7l) scriptlet failed, exit status 1 [ 163s] [159/170] installing udev-182-7.4 [ 163s] Failed to get D-Bus connection: No connection to service manager. [ 163s] Failed to get D-Bus connection: No connection to service manager. [ 163s] Failed to get D-Bus connection: No connection to service manager. [ 163s] Failed to get D-Bus connection: No connection to service manager. [ 163s] [160/170] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 164s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 164s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 164s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 164s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 164s] [161/170] installing rpm-libs-4.9.1-4.12 [ 164s] [162/170] installing vconf-keys-devel-0.2.51-1.4 [ 164s] [163/170] installing libudev-182-7.4 [ 165s] [164/170] installing rpm-libs-x86-arm-4.9.1-10.7 [ 165s] [165/170] installing libtool-2.2.6b-2.15 [ 165s] [166/170] installing cross-armv7l-binutils-accel-armv7l-2.22-1.6 [ 166s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 166s] [167/170] installing rpm-build-4.9.1-4.12 [ 166s] [168/170] installing vconf-devel-0.2.51-1.4 [ 167s] [169/170] installing rpm-x86-arm-4.9.1-9.7 [ 167s] /bin/rpm.orig-arm already present - skipping. [ 167s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 167s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 167s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 167s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 167s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 167s] [170/170] installing rpm-build-x86-arm-4.9.1-9.7 [ 167s] /usr/bin/rpmbuild [ 167s] /usr/lib/rpm/debugedit [ 167s] now finalizing build dir... [ 168s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 171s] build target is armv7l-tizen-linux [ 171s] ----------------------------------------------------------------- [ 171s] I have the following modifications for sensor.spec: [ 171s] 6c6 [ 171s] < Release: 1 [ 171s] --- [ 171s] > Release: 2.3 [ 171s] ----------------------------------------------------------------- [ 171s] ----- building sensor.spec (user abuild) [ 171s] ----------------------------------------------------------------- [ 171s] ----------------------------------------------------------------- [ 171s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w16.vlan200.tizendev.org/Tizen:2.2:Main/standard/ebac229e5b446d7a4f7befe7243d9239-sensor' /home/abuild/rpmbuild/SOURCES/sensor.spec [ 172s] Building target platforms: armv7l-tizen-linux [ 172s] Building for target armv7l-tizen-linux [ 172s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.tWNr3i [ 172s] + umask 022 [ 172s] + cd /home/abuild/rpmbuild/BUILD [ 172s] + LANG=C [ 172s] + export LANG [ 172s] + unset DISPLAY [ 172s] + cd /home/abuild/rpmbuild/BUILD [ 172s] + rm -rf sensor-0.5.27 [ 172s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/sensor-0.5.27.tar.gz [ 172s] + /bin/tar -xf - [ 172s] + STATUS=0 [ 172s] + '[' 0 -ne 0 ']' [ 172s] + cd sensor-0.5.27 [ 172s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 172s] + exit 0 [ 172s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.VBTPq8 [ 172s] + umask 022 [ 172s] + cd /home/abuild/rpmbuild/BUILD [ 172s] + cd sensor-0.5.27 [ 172s] + LANG=C [ 172s] + export LANG [ 172s] + unset DISPLAY [ 172s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 172s] + export CFLAGS [ 172s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 172s] + export CXXFLAGS [ 172s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 172s] + export FFLAGS [ 172s] + LD_AS_NEEDED=1 [ 172s] + export LD_AS_NEEDED [ 172s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 172s] + export CFLAGS [ 172s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 172s] + export CXXFLAGS [ 172s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 172s] + export FFLAGS [ 172s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . [ 172s] -- The CXX compiler identification is GNU [ 172s] -- Check for working CXX compiler: /usr/bin/c++ [ 172s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 172s] -- Detecting CXX compiler ABI info [ 173s] -- Detecting CXX compiler ABI info - done [ 173s] -- checking for modules 'sf_common;vconf;glib-2.0' [ 173s] -- found sf_common, version 1.0 [ 173s] -- found vconf, version 0.2.45 [ 173s] -- found glib-2.0, version 2.32.3 [ 174s] add -DSIMULATOR [ 174s] -- Configuring done [ 174s] -- Generating done [ 174s] CMake Warning: [ 174s] Manually-specified variables were not used by the project: [ 174s] [ 174s] CMAKE_INSTALL_LIBDIR [ 174s] INCLUDE_INSTALL_DIR [ 174s] SHARE_INSTALL_PREFIX [ 174s] SYSCONF_INSTALL_DIR [ 174s] [ 174s] [ 174s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/sensor-0.5.27 [ 174s] + make -j4 [ 174s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/sensor-0.5.27 -B/home/abuild/rpmbuild/BUILD/sensor-0.5.27 --check-build-system CMakeFiles/Makefile.cmake 0 [ 174s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/sensor-0.5.27/CMakeFiles /home/abuild/rpmbuild/BUILD/sensor-0.5.27/CMakeFiles/progress.marks [ 174s] make -f CMakeFiles/Makefile2 all [ 174s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 174s] make -f CMakeFiles/sensor.dir/build.make CMakeFiles/sensor.dir/depend [ 174s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 174s] cd /home/abuild/rpmbuild/BUILD/sensor-0.5.27 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/sensor-0.5.27 /home/abuild/rpmbuild/BUILD/sensor-0.5.27 /home/abuild/rpmbuild/BUILD/sensor-0.5.27 /home/abuild/rpmbuild/BUILD/sensor-0.5.27 /home/abuild/rpmbuild/BUILD/sensor-0.5.27/CMakeFiles/sensor.dir/DependInfo.cmake --color= [ 174s] Scanning dependencies of target sensor [ 174s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 174s] make -f CMakeFiles/sensor.dir/build.make CMakeFiles/sensor.dir/build [ 174s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 174s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/sensor-0.5.27/CMakeFiles 1 [ 174s] [100%] Building CXX object CMakeFiles/sensor.dir/src/client.cpp.o [ 174s] /usr/bin/c++ -Dsensor_EXPORTS -D_DEBUG -DSIMULATOR -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fPIC -I/home/abuild/rpmbuild/BUILD/sensor-0.5.27/include -I/usr/include/sf_common -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -Wall -g -lma -o CMakeFiles/sensor.dir/src/client.cpp.o -c /home/abuild/rpmbuild/BUILD/sensor-0.5.27/src/client.cpp [ 174s] In file included from /home/abuild/rpmbuild/BUILD/sensor-0.5.27/src/client.cpp:57:0: [ 174s] /home/abuild/rpmbuild/BUILD/sensor-0.5.27/include/sensor.h:85:0: warning: "MAX_KEY_LEN" redefined [ 174s] /usr/include/sf_common/sf_common.h:33:0: note: this is the location of the previous definition [ 176s] Linking CXX shared library libsensor.so [ 176s] /usr/bin/cmake -E cmake_link_script CMakeFiles/sensor.dir/link.txt --verbose=1 [ 176s] /usr/bin/c++ -fPIC -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -shared -Wl,-soname,libsensor.so.1 -o libsensor.so.1.1.0 CMakeFiles/sensor.dir/src/client.cpp.o -lsf_common -lvconf -lglib-2.0 [ 176s] /usr/bin/cmake -E cmake_symlink_library libsensor.so.1.1.0 libsensor.so.1 libsensor.so [ 176s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 176s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/sensor-0.5.27/CMakeFiles 1 [ 176s] [100%] Built target sensor [ 176s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 176s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/sensor-0.5.27/CMakeFiles 0 [ 176s] + exit 0 [ 176s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.5MpOeg [ 176s] + umask 022 [ 176s] + cd /home/abuild/rpmbuild/BUILD [ 176s] + cd sensor-0.5.27 [ 176s] + LANG=C [ 176s] + export LANG [ 176s] + unset DISPLAY [ 176s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm [ 176s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm [ 176s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm [ 176s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm install [ 176s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/sensor-0.5.27 -B/home/abuild/rpmbuild/BUILD/sensor-0.5.27 --check-build-system CMakeFiles/Makefile.cmake 0 [ 177s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/sensor-0.5.27/CMakeFiles /home/abuild/rpmbuild/BUILD/sensor-0.5.27/CMakeFiles/progress.marks [ 177s] /usr/bin/make -f CMakeFiles/Makefile2 all [ 177s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 177s] /usr/bin/make -f CMakeFiles/sensor.dir/build.make CMakeFiles/sensor.dir/depend [ 177s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 177s] cd /home/abuild/rpmbuild/BUILD/sensor-0.5.27 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/sensor-0.5.27 /home/abuild/rpmbuild/BUILD/sensor-0.5.27 /home/abuild/rpmbuild/BUILD/sensor-0.5.27 /home/abuild/rpmbuild/BUILD/sensor-0.5.27 /home/abuild/rpmbuild/BUILD/sensor-0.5.27/CMakeFiles/sensor.dir/DependInfo.cmake --color= [ 177s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 177s] /usr/bin/make -f CMakeFiles/sensor.dir/build.make CMakeFiles/sensor.dir/build [ 177s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 177s] make[2]: Nothing to be done for `CMakeFiles/sensor.dir/build'. [ 177s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 177s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/sensor-0.5.27/CMakeFiles 1 [ 177s] [100%] Built target sensor [ 177s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 177s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/sensor-0.5.27/CMakeFiles 0 [ 177s] /usr/bin/make -f CMakeFiles/Makefile2 preinstall [ 177s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 177s] make[1]: Nothing to be done for `preinstall'. [ 177s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/sensor-0.5.27' [ 177s] Install the project... [ 177s] /usr/bin/cmake -P cmake_install.cmake [ 177s] -- Install configuration: "" [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/lib/libsensor.so.1.1.0 [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/lib/libsensor.so.1 [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/lib/libsensor.so [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/include/sensor/sensor.h [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/include/sensor/sensor_accel.h [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/include/sensor/sensor_geomag.h [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/include/sensor/sensor_proxi.h [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/include/sensor/sensor_motion.h [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/include/sensor/sensor_light.h [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/include/sensor/sensor_gyro.h [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/include/sensor/sensor_barometer.h [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/include/sensor/sensor_fusion.h [ 177s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/lib/pkgconfig/sensor.pc [ 177s] + rm -f /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/share/info/dir [ 177s] + find /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm -regex '.*\.la$' [ 177s] + xargs rm -f -- [ 177s] + find /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm -regex '.*\.a$' [ 177s] + xargs rm -f -- [ 177s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/share/license [ 177s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/share/license/sensor [ 177s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/sensor-0.5.27 [ 177s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm/usr/lib/libsensor.so.1.1.0 [ 177s] symlinked /usr/lib/debug/usr/lib/libsensor.so.1.1.0.debug to /usr/lib/debug/usr/lib/libsensor.so.debug [ 177s] symlinked /usr/lib/debug/usr/lib/libsensor.so.1.1.0.debug to /usr/lib/debug/usr/lib/libsensor.so.1.debug [ 177s] 191 blocks [ 177s] + /usr/lib/rpm/check-buildroot [ 177s] + /usr/lib/rpm//brp-compress [ 177s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 177s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 177s] + /usr/lib/rpm/brp-python-bytecompile [ 177s] + /usr/lib/rpm/brp-python-hardlink [ 177s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm [ 177s] Processing files: sensor-0.5.27-2.3.armv7l [ 177s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 177s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 177s] [ 177s] Provides: libsensor.so.1 [ 177s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 177s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 177s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 177s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 177s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libm.so.6 libm.so.6(GLIBC_2.4) libsf_common.so libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libvconf.so.0 [ 177s] Processing files: sensor-devel-0.5.27-2.3.armv7l [ 178s] Provides: pkgconfig(sensor) = 1.1.0 [ 178s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 178s] Requires: /usr/bin/pkg-config libsensor.so.1 [ 178s] Processing files: sensor-debuginfo-0.5.27-2.3.armv7l [ 178s] Processing files: sensor-debugsource-0.5.27-2.3.armv7l [ 178s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm [ 178s] Wrote: /home/abuild/rpmbuild/SRPMS/sensor-0.5.27-2.3.src.rpm [ 178s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/sensor-0.5.27-2.3.armv7l.rpm [ 178s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/sensor-devel-0.5.27-2.3.armv7l.rpm [ 178s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/sensor-debuginfo-0.5.27-2.3.armv7l.rpm [ 178s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/sensor-debugsource-0.5.27-2.3.armv7l.rpm [ 178s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.PnSZ4q [ 178s] + umask 022 [ 178s] + cd /home/abuild/rpmbuild/BUILD [ 178s] + cd sensor-0.5.27 [ 178s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/sensor-0.5.27-2.3.arm [ 178s] + exit 0 [ 178s] ... checking for files with abuild user/group [ 178s] ... creating baselibs [ 179s] ... comparing built packages with the former built [ 179s] /usr/lib/build/rpm-check.sh [ 179s] compare /.build.oldpackages/sensor-0.5.27-2.2.src.rpm /home/abuild/rpmbuild/SRPMS/sensor-0.5.27-2.3.src.rpm [ 179s] compare /.build.oldpackages/sensor-0.5.27-2.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/sensor-0.5.27-2.3.armv7l.rpm [ 179s] --- /tmp/tmp.ILW0Klgutz 2013-11-07 14:13:50.498379693 +0000 [ 179s] +++ /tmp/tmp.bFBADqqJ4E 2013-11-07 14:13:50.510379693 +0000 [ 179s] @@ -1,7 +1,7 @@ [ 179s] sensor 0.5.27 (none) [ 179s] Sensor framework client library [ 179s] Sensor framework client library [ 179s] - tizen Tizen:2.2:Main obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/ebac229e5b446d7a4f7befe7243d9239-sensor Apache 2.0 Apache 2.0 [ 179s] + tizen Tizen:2.2:Main obs://w16.vlan200.tizendev.org/Tizen:2.2:Main/standard/ebac229e5b446d7a4f7befe7243d9239-sensor Apache 2.0 Apache 2.0 [ 179s] TO_BE/FILLED_IN (none) (none) (none) (none) [ 179s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 179s] cpio gzip 9 [ 179s] RPM meta information is different [ 179s] compare /.build.oldpackages/sensor-debuginfo-0.5.27-2.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/sensor-debuginfo-0.5.27-2.3.armv7l.rpm [ 179s] --- /tmp/tmp.BFyNegTKtY 2013-11-07 14:13:50.570379691 +0000 [ 179s] +++ /tmp/tmp.g3ytnbdSI2 2013-11-07 14:13:50.582379691 +0000 [ 179s] @@ -3,7 +3,7 @@ [ 179s] This package provides debug information for package sensor. [ 179s] Debug information is useful when developing applications that use this [ 179s] package or when debugging this package. [ 179s] - tizen Tizen:2.2:Main obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/ebac229e5b446d7a4f7befe7243d9239-sensor Apache 2.0 Apache 2.0 [ 179s] + tizen Tizen:2.2:Main obs://w16.vlan200.tizendev.org/Tizen:2.2:Main/standard/ebac229e5b446d7a4f7befe7243d9239-sensor Apache 2.0 Apache 2.0 [ 179s] Development/Debug (none) (none) (none) (none) [ 179s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 179s] cpio gzip 9 [ 179s] RPM meta information is different [ 179s] compare /.build.oldpackages/sensor-debugsource-0.5.27-2.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/sensor-debugsource-0.5.27-2.3.armv7l.rpm [ 179s] --- /tmp/tmp.9MlR0X5edv 2013-11-07 14:13:50.630379690 +0000 [ 179s] +++ /tmp/tmp.TVxAJfgduh 2013-11-07 14:13:50.642379689 +0000 [ 179s] @@ -3,7 +3,7 @@ [ 179s] This package provides debug sources for package sensor. [ 179s] Debug sources are useful when developing applications that use this [ 179s] package or when debugging this package. [ 179s] - tizen Tizen:2.2:Main obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/ebac229e5b446d7a4f7befe7243d9239-sensor Apache 2.0 Apache 2.0 [ 179s] + tizen Tizen:2.2:Main obs://w16.vlan200.tizendev.org/Tizen:2.2:Main/standard/ebac229e5b446d7a4f7befe7243d9239-sensor Apache 2.0 Apache 2.0 [ 179s] Development/Debug (none) (none) (none) (none) [ 179s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 179s] cpio gzip 9 [ 179s] RPM meta information is different [ 179s] compare /.build.oldpackages/sensor-devel-0.5.27-2.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/sensor-devel-0.5.27-2.3.armv7l.rpm [ 179s] --- /tmp/tmp.l6ZmhHgtbu 2013-11-07 14:13:50.690379688 +0000 [ 179s] +++ /tmp/tmp.L89wJwS52Z 2013-11-07 14:13:50.702379688 +0000 [ 179s] @@ -1,7 +1,7 @@ [ 179s] sensor-devel 0.5.27 (none) [ 179s] Sensor framework library (devel) [ 179s] Sensor framework client library (devel) [ 179s] - tizen Tizen:2.2:Main obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/ebac229e5b446d7a4f7befe7243d9239-sensor Apache 2.0 Apache 2.0 [ 179s] + tizen Tizen:2.2:Main obs://w16.vlan200.tizendev.org/Tizen:2.2:Main/standard/ebac229e5b446d7a4f7befe7243d9239-sensor Apache 2.0 Apache 2.0 [ 179s] System/Sensor Framework (none) (none) (none) (none) [ 179s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 179s] cpio gzip 9 [ 179s] RPM meta information is different [ 179s] ... saving built statistics [ 179s] ... saving built packages [ 179s] /home/abuild/rpmbuild/RPMS/armv7l/sensor-0.5.27-2.3.armv7l.rpm [ 179s] /home/abuild/rpmbuild/RPMS/armv7l/sensor-debuginfo-0.5.27-2.3.armv7l.rpm [ 179s] /home/abuild/rpmbuild/RPMS/armv7l/sensor-debugsource-0.5.27-2.3.armv7l.rpm [ 179s] /home/abuild/rpmbuild/RPMS/armv7l/sensor-devel-0.5.27-2.3.armv7l.rpm [ 179s] /home/abuild/rpmbuild/SRPMS/sensor-0.5.27-2.3.src.rpm [ 179s] /home/abuild/rpmbuild/OTHER/_statistics [ 179s] [ 179s] w16 finished "build sensor.spec" at Thu Nov 7 14:13:51 UTC 2013. [ 179s] [ 180s] /.build/build: line 368: 251 Killed background_monitor_process [ 183s] [ 146.374546] SysRq : Power Off [ 183s] [ 146.384581] Power down. [ 183s] build: extracting built packages... [ 183s] sensor-0.5.27-2.3.armv7l.rpm [ 183s] sensor-debuginfo-0.5.27-2.3.armv7l.rpm [ 183s] sensor-debugsource-0.5.27-2.3.armv7l.rpm [ 183s] sensor-devel-0.5.27-2.3.armv7l.rpm [ 183s] sensor-0.5.27-2.3.src.rpm [ 183s] _statistics