[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w07 started "build usbutils.spec" at Thu Nov 7 08:36:11 UTC 2013. [ 0s] [ 0s] Building usbutils for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 'f975c5733d4b9b79d9558b308f7209c1' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/usbutils.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/usbutils.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/usbutils.spec build rpmlint-Factory ... [ 0s] hostname: Name or service not known [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm -> rpm-libs [ 0s] [1/56] preinstalling libgcc... [ 0s] [2/56] preinstalling setup... [ 0s] [3/56] preinstalling filesystem... [ 0s] [4/56] preinstalling eglibc... [ 0s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 2s] [50/56] preinstalling popt-x86-arm... [ 2s] [51/56] preinstalling rpm-libs-x86-arm... [ 2s] [52/56] preinstalling sqlite-x86-arm... [ 2s] [53/56] preinstalling xz-libs-x86-arm... [ 2s] [54/56] preinstalling zlib-x86-arm... [ 2s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 6s] [ 0.000000] tsc: Fast TSC calibration failed [ 7s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.21.2 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 6825/2097152 files, 239020/8388608 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 8s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] switching personality to 8... [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] swapon on /dev/vdb [ 9s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 9s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/usbutils.spec ... [ 10s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/usbutils.spec build rpmlint-Factory ... [ 10s] running rpm-x86-arm postinstall script [ 10s] /bin/rpm [ 10s] /usr/bin/rpm2cpio [ 10s] /usr/bin/rpmdb [ 10s] /usr/bin/rpmquery [ 10s] /usr/bin/rpmsign [ 10s] /usr/bin/rpmverify [ 11s] running rpm-libs-x86-arm postinstall script [ 11s] running tizen-accelerator postinstall script [ 11s] running bash-x86-arm postinstall script [ 11s] initializing rpm db... [ 15s] [1/146] installing kernel-headers-3.0.15-1.10 [ 16s] [2/146] installing tizen-release-2.2.0-1.9 [ 16s] [3/146] installing tzdata-2011h-1.10 [ 17s] [4/146] installing libgcc-4.5.3-2.33 [ 17s] [5/146] installing setup-0.1-2.5 [ 26s] [6/146] installing filesystem-0.1-1.9 [ 43s] warning: group lock does not exist - using root [ 43s] warning: group mail does not exist - using root [ 43s] [7/146] installing eglibc-2.13-2.18 [ 45s] [8/146] installing libstdc++-4.5.3-2.33 [ 46s] [9/146] installing eglibc-common-2.13-2.18 [ 57s] /var/tmp/rpm-tmp.oA8rK5: line 2: /usr/bin/xargs: No such file or directory [ 57s] [10/146] installing libstdc++-devel-4.5.3-2.33 [ 58s] [11/146] installing bash-4.1-4.8 [ 58s] [12/146] installing bzip2-libs-1.0.5-5.12 [ 58s] [13/146] installing c-ares-1.7.4-3.22 [ 58s] [14/146] installing cpio-2.8-4.8 [ 58s] [15/146] installing diffutils-3.0-4.8 [ 58s] [16/146] installing e2fsprogs-libs-1.41.9-3.7 [ 58s] [17/146] installing elfutils-libelf-0.152-2.16 [ 59s] [18/146] installing fdupes-1.40-42.10 [ 59s] [19/146] installing findutils-4.2.31-2.8 [ 59s] [20/146] installing gdbm-1.8.3-2.33 [ 59s] [21/146] installing libattr-2.4.44-8.12 [ 59s] [22/146] installing libgomp-4.5.3-2.33 [ 59s] [23/146] installing libidn-1.15-7.29 [ 60s] [24/146] installing liblua-5.1.4-7.7 [ 60s] [25/146] installing libusb-1.0.9-16.2 [ 60s] [26/146] installing libuuid-2.20.2-7.6 [ 60s] [27/146] installing lzo-2.03-2.18 [ 61s] [28/146] installing m4-1.4.14-1.9 [ 61s] [29/146] installing make-3.81-1.12 [ 61s] [30/146] installing net-tools-1.60-88.9 [ 61s] [31/146] installing nspr-4.8.7-1.17 [ 62s] [32/146] installing nss-softokn-freebl-3.12.9-3.28 [ 62s] [33/146] installing patch-2.6.1.169-1.9 [ 62s] [34/146] installing pkgconfig-0.25-3.11 [ 62s] [35/146] installing popt-1.16-4.11 [ 63s] [36/146] installing readline-5.2-14.7 [ 63s] [37/146] installing sed-4.1.5-3.8 [ 63s] [38/146] installing sqlite-3.7.13-1.12 [ 63s] [39/146] installing xz-libs-5.0.3-2.17 [ 63s] [40/146] installing zlib-1.2.5-3.18 [ 63s] [41/146] installing gmp-5.0.1-2.16 [ 63s] [42/146] installing libpcre-7.7-4.44 [ 63s] [43/146] installing ncurses-libs-5.7-4.11 [ 64s] [44/146] installing build-compare-2009.10.14-26.14 [ 64s] [45/146] installing qemu.x86_64-1.2-2.10 [ 67s] [46/146] installing eglibc-headers-2.13-2.18 [ 67s] [47/146] installing libcap-2.21-2.10 [ 67s] [48/146] installing unzip-6.0-10.16 [ 67s] [49/146] installing zlib-devel-1.2.5-3.18 [ 67s] [50/146] installing grep-2.5.1a-63.9 [ 67s] [51/146] installing libacl-2.2.49-3.12 [ 67s] [52/146] installing libfile-5.04-2.11 [ 68s] [53/146] installing libusb-compat-0.1.4-3.2 [ 68s] [54/146] installing lzo-minilzo-2.03-2.18 [ 68s] [55/146] installing mpfr-3.0.0-1.16 [ 68s] [56/146] installing ncurses-5.7-4.11 [ 68s] [57/146] installing binutils-2.22-1.12 [ 68s] [58/146] installing bzip2-1.0.5-5.12 [ 68s] [59/146] installing libblkid-2.20.2-7.6 [ 69s] [60/146] installing xz-5.0.3-2.17 [ 69s] [61/146] installing elfutils-libs-0.152-2.16 [ 69s] [62/146] installing nss-3.12.9-3.28 [ 70s] [63/146] installing perl-5.12.1-62.7 [ 76s] [64/146] installing ncurses-base-5.7-4.11 [ 76s] [65/146] installing perl-HTML-Tagset-3.20-8.2 [ 76s] [66/146] installing perl-IO-Compress-Base-2.008-62.7 [ 76s] [67/146] installing perl-Module-Pluggable-3.60-62.7 [ 76s] [68/146] installing perl-Pod-Escapes-1.04-62.7 [ 77s] [69/146] installing perl-TimeDate-1.20-1.2 [ 77s] [70/146] installing eglibc-devel-2.13-2.18 [ 77s] [71/146] installing libusb-compat-devel-0.1.4-3.2 [ 77s] [72/146] installing lzo-devel-2.03-2.18 [ 77s] [73/146] installing perl-Compress-Raw-Zlib-2.008-62.7 [ 77s] [74/146] installing perl-devel-5.12.1-62.7 [ 77s] [75/146] installing perl-libs-5.12.1-62.7 [ 78s] [76/146] installing tar-1.17-5.11 [ 78s] [77/146] installing coreutils-6.9-9.12 [ 78s] [78/146] installing file-5.04-2.11 [ 78s] [79/146] installing libmount-2.20.2-7.6 [ 79s] [80/146] installing mpc-0.9-1.16 [ 79s] [81/146] installing openssl-1.0.1c-2.26 [ 79s] [82/146] installing xz-lzma-compat-5.0.3-2.17 [ 79s] [83/146] installing elfutils-0.152-2.16 [ 79s] [84/146] installing nss-sysinit-3.12.9-3.28 [ 79s] [85/146] installing perl-ExtUtils-ParseXS-2.18-62.7 [ 79s] [86/146] installing perl-Pod-Simple-3.07-62.7 [ 80s] [87/146] installing perl-Test-Simple-0.80-62.7 [ 80s] [88/146] installing tizen-accelerator-1.0.1-1.14 [ 80s] [89/146] installing perl-IO-Compress-Zlib-2.008-62.7 [ 80s] [90/146] installing perl-Test-Harness-3.12-62.7 [ 80s] [91/146] installing gawk-3.1.5-2.8 [ 80s] [92/146] installing gzip-1.3.14-3.8 [ 80s] [93/146] installing build-2011.01.10a-1.9 [ 81s] [94/146] installing libcurl-7.28.1-3.26 [ 81s] [95/146] installing cpp-4.5.3-2.33 [ 81s] [96/146] installing util-linux-2.20.2-7.6 [ 81s] warning: group tty does not exist - using root [ 81s] /bin/chown: `root:root': invalid user [ 81s] [97/146] installing bzip2-libs-x86-arm-1.0.5-9.7 [ 81s] [98/146] installing eglibc-x86-arm-2.13-9.7 [ 82s] [99/146] installing elfutils-libelf-x86-arm-0.152-9.7 [ 82s] [100/146] installing elfutils-libs-x86-arm-0.152-9.7 [ 82s] [101/146] installing gmp-x86-arm-5.0.1-9.7 [ 82s] [102/146] installing libacl-x86-arm-2.2.49-9.7 [ 83s] [103/146] installing libattr-x86-arm-2.4.44-9.7 [ 83s] [104/146] installing libcap-x86-arm-2.21-9.6 [ 83s] [105/146] installing libfile-x86-arm-5.04-9.7 [ 83s] [106/146] installing libgcc-x86-arm-4.5.3-9.7 [ 83s] [107/146] installing liblua-x86-arm-5.1.4-9.7 [ 84s] [108/146] installing mpc-x86-arm-0.9-9.7 [ 84s] [109/146] installing mpfr-x86-arm-3.0.0-9.7 [ 84s] [110/146] installing ncurses-libs-x86-arm-5.7-9.6 [ 84s] [111/146] installing nspr-x86-arm-4.8.7-9.7 [ 84s] [112/146] installing nss-softokn-freebl-x86-arm-3.12.9-9.7 [ 84s] [113/146] installing nss-x86-arm-3.12.9-9.7 [ 85s] [114/146] installing perl-ExtUtils-MakeMaker-6.36-62.7 [ 85s] [115/146] installing popt-x86-arm-1.16-9.7 [ 86s] [116/146] installing sqlite-x86-arm-3.7.13-9.6 [ 86s] [117/146] installing xz-libs-x86-arm-5.0.3-9.7 [ 86s] [118/146] installing zlib-x86-arm-1.2.5-7.6 [ 86s] [119/146] installing curl-7.28.1-3.26 [ 86s] [120/146] installing gcc-4.5.3-2.33 [ 87s] [121/146] installing perl-CPAN-1.9205-62.7 [ 87s] [122/146] installing bash-x86-arm-4.1-7.7 [ 87s] [123/146] installing fdupes-x86-arm-1.40-9.7 [ 87s] [124/146] installing findutils-x86-arm-4.2.31-7.7 [ 87s] [125/146] installing gawk-x86-arm-3.1.5-7.7 [ 88s] [126/146] installing gzip-x86-arm-1.3.14-9.7 [ 88s] [127/146] installing make-x86-arm-3.81-8.6 [ 88s] [128/146] installing patch-x86-arm-2.6.1.169-7.7 [ 88s] [129/146] installing sed-x86-arm-4.1.5-9.7 [ 88s] /bin/sed.orig-arm already present - skipping. [ 88s] [130/146] installing diffutils-x86-arm-3.0-9.7 [ 88s] /usr/bin/cmp.orig-arm already present - skipping. [ 88s] /usr/bin/diff.orig-arm already present - skipping. [ 88s] /usr/bin/diff3.orig-arm already present - skipping. [ 88s] /usr/bin/sdiff.orig-arm already present - skipping. [ 88s] [131/146] installing autoconf-2.68-1.9 [ 89s] [132/146] installing coreutils-x86-arm-6.9-7.7 [ 91s] [133/146] installing file-x86-arm-5.04-7.7 [ 91s] [134/146] installing tar-x86-arm-1.17-9.6 [ 91s] /bin/tar.orig-arm already present - skipping. [ 91s] [135/146] installing elfutils-x86-arm-0.152-7.8 [ 91s] [136/146] installing gcc-c++-4.5.3-2.33 [ 91s] [137/146] installing rpm-4.9.1-4.12 [ 92s] [138/146] installing automake-1.11.1-3.12 [ 92s] [139/146] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 93s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 93s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 93s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 93s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 93s] [140/146] installing rpm-libs-4.9.1-4.12 [ 93s] [141/146] installing rpm-libs-x86-arm-4.9.1-10.7 [ 93s] [142/146] installing libtool-2.2.6b-2.15 [ 94s] [143/146] installing cross-armv7l-binutils-accel-armv7l-2.22-1.6 [ 94s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 94s] [144/146] installing rpm-build-4.9.1-4.12 [ 95s] [145/146] installing rpm-x86-arm-4.9.1-9.7 [ 95s] /bin/rpm.orig-arm already present - skipping. [ 95s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 95s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 95s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 95s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 95s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 95s] [146/146] installing rpm-build-x86-arm-4.9.1-9.7 [ 95s] /usr/bin/rpmbuild [ 95s] /usr/lib/rpm/debugedit [ 95s] now finalizing build dir... [ 95s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 98s] build target is armv7l-tizen-linux [ 98s] ----------------------------------------------------------------- [ 98s] I have the following modifications for usbutils.spec: [ 98s] 5c5 [ 98s] < Release: 6 [ 98s] --- [ 98s] > Release: 7.2 [ 98s] ----------------------------------------------------------------- [ 98s] ----- building usbutils.spec (user abuild) [ 98s] ----------------------------------------------------------------- [ 98s] ----------------------------------------------------------------- [ 98s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/f975c5733d4b9b79d9558b308f7209c1-usbutils' /home/abuild/rpmbuild/SOURCES/usbutils.spec [ 99s] Building target platforms: armv7l-tizen-linux [ 99s] Building for target armv7l-tizen-linux [ 99s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Fbt6UZ [ 99s] + umask 022 [ 99s] + cd /home/abuild/rpmbuild/BUILD [ 99s] + LANG=C [ 99s] + export LANG [ 99s] + unset DISPLAY [ 99s] + cd /home/abuild/rpmbuild/BUILD [ 99s] + rm -rf usbutils-0.86 [ 99s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/usbutils-0.86.tar.gz [ 99s] + /bin/tar -xf - [ 99s] + STATUS=0 [ 99s] + '[' 0 -ne 0 ']' [ 99s] + cd usbutils-0.86 [ 99s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 99s] + exit 0 [ 99s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.zW7XFI [ 99s] + umask 022 [ 99s] + cd /home/abuild/rpmbuild/BUILD [ 99s] + cd usbutils-0.86 [ 99s] + LANG=C [ 99s] + export LANG [ 99s] + unset DISPLAY [ 99s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 99s] + export CFLAGS [ 99s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 99s] + export CXXFLAGS [ 99s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 99s] + export FFLAGS [ 99s] + LD_AS_NEEDED=1 [ 99s] + export LD_AS_NEEDED [ 99s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 99s] + export CFLAGS [ 99s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 99s] + export CXXFLAGS [ 99s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 99s] + export FFLAGS [ 99s] + autoreconf -v --install --force [ 102s] autoreconf: Entering directory `.' [ 102s] autoreconf: configure.ac: not using Gettext [ 103s] autoreconf: running: aclocal --force [ 109s] autoreconf: configure.ac: tracing [ 113s] autoreconf: configure.ac: not using Libtool [ 113s] autoreconf: running: /usr/bin/autoconf --force [ 118s] autoreconf: running: /usr/bin/autoheader --force [ 122s] autoreconf: running: automake --add-missing --copy --force-missing [ 127s] autoreconf: Leaving directory `.' [ 127s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/lib/usbutils [ 128s] checking for a BSD-compatible install... /usr/bin/install -c [ 129s] checking whether build environment is sane... yes [ 129s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 129s] checking for gawk... gawk [ 129s] checking whether make sets $(MAKE)... yes [ 129s] checking for style of include used by make... GNU [ 129s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 129s] checking for gcc... gcc [ 129s] checking whether the C compiler works... yes [ 129s] checking for C compiler default output file name... a.out [ 129s] checking for suffix of executables... [ 129s] checking whether we are cross compiling... no [ 129s] checking for suffix of object files... o [ 129s] checking whether we are using the GNU C compiler... yes [ 129s] checking whether gcc accepts -g... yes [ 129s] checking for gcc option to accept ISO C89... none needed [ 129s] checking dependency style of gcc... gcc3 [ 129s] checking how to run the C preprocessor... gcc -E [ 129s] checking for grep that handles long lines and -e... /bin/grep [ 129s] checking for egrep... /bin/grep -E [ 129s] checking for ANSI C header files... yes [ 129s] checking for sys/types.h... yes [ 129s] checking for sys/stat.h... yes [ 129s] checking for stdlib.h... yes [ 130s] checking for string.h... yes [ 130s] checking for memory.h... yes [ 130s] checking for strings.h... yes [ 130s] checking for inttypes.h... yes [ 130s] checking for stdint.h... yes [ 130s] checking for unistd.h... yes [ 130s] checking minix/config.h usability... no [ 130s] checking minix/config.h presence... no [ 130s] checking for minix/config.h... no [ 130s] checking whether it is safe to define __EXTENSIONS__... yes [ 130s] checking for special C compiler options needed for large files... no [ 130s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 130s] checking for inflateEnd in -lz... yes [ 130s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 130s] checking for pkg-config... /usr/bin/pkg-config [ 130s] checking pkg-config is at least version 0.9.0... yes [ 130s] checking for LIBUSB... yes [ 130s] configure: creating ./config.status [ 130s] config.status: creating Makefile [ 130s] config.status: creating config.h [ 130s] config.status: executing depfiles commands [ 130s] [ 130s] usbutils 0.86 [ 130s] ============= [ 130s] [ 130s] prefix: /usr [ 130s] datarootdir: ${prefix}/share [ 130s] datadir: /usr/lib/usbutils [ 130s] mandir: /usr/share/man [ 130s] [ 130s] usb.ids: /usr/lib/usbutils/usb.ids [ 130s] zlib: yes [ 130s] [ 130s] compiler: gcc [ 130s] cflags: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb [ 130s] ldflags: [ 130s] [ 130s] + make -j4 [ 130s] make all-am [ 130s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/usbutils-0.86' [ 130s] CC lsusb-lsusb.o [ 130s] CC lsusb-lsusb-t.o [ 130s] CC lsusb-names.o [ 130s] CC lsusb-devtree.o [ 130s] CC lsusb-usbmisc.o [ 130s] sed 's|@usbids@|/usr/lib/usbutils/usb.ids|g' update-usbids.sh.in >update-usbids.sh [ 130s] chmod 755 update-usbids.sh [ 130s] sed 's|VERSION|0.86|g;s|@usbids@|/usr/lib/usbutils/usb.ids|g' lsusb.8.in >lsusb.8 [ 130s] sed 's|VERSION|0.86|g' usb-devices.1.in >usb-devices.1 [ 130s] gzip -c -9 usb.ids > usb.ids.gz [ 130s] sed 's|@usbids@|/usr/lib/usbutils/usb.ids|g;s|@VERSION[@]|0.86|g' usbutils.pc.in >usbutils.pc [ 131s] CCLD lsusb [ 131s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/usbutils-0.86' [ 131s] + exit 0 [ 131s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.r1Z7Lq [ 131s] + umask 022 [ 131s] + cd /home/abuild/rpmbuild/BUILD [ 131s] + cd usbutils-0.86 [ 131s] + LANG=C [ 131s] + export LANG [ 131s] + unset DISPLAY [ 131s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm [ 131s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm [ 131s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/share/license [ 131s] + cp COPYING /home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/share/license/usbutils [ 131s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm pkgconfigdir=/usr/share/pkgconfig [ 131s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/usbutils-0.86' [ 131s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/bin" [ 131s] /usr/bin/install -c usb-devices '/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/bin' [ 131s] test -z "/usr/sbin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/sbin" [ 131s] /usr/bin/install -c lsusb '/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/sbin' [ 131s] test -z "/usr/sbin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/sbin" [ 131s] /usr/bin/install -c update-usbids.sh '/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/sbin' [ 131s] test -z "/usr/lib/usbutils" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/lib/usbutils" [ 131s] /usr/bin/install -c -m 644 usb.ids usb.ids.gz '/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/lib/usbutils' [ 131s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/share/man/man1" [ 131s] /usr/bin/install -c -m 644 usb-devices.1 '/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/share/man/man1' [ 131s] test -z "/usr/share/man/man8" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/share/man/man8" [ 131s] /usr/bin/install -c -m 644 lsusb.8 '/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/share/man/man8' [ 131s] test -z "/usr/share/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/share/pkgconfig" [ 131s] /usr/bin/install -c -m 644 usbutils.pc '/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/share/pkgconfig' [ 131s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/usbutils-0.86' [ 131s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/usbutils-0.86 [ 131s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/sbin/lsusb [ 132s] 300 blocks [ 132s] + /usr/lib/rpm/check-buildroot [ 132s] + /usr/lib/rpm//brp-compress [ 132s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 132s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 132s] + /usr/lib/rpm/brp-python-bytecompile [ 132s] + /usr/lib/rpm/brp-python-hardlink [ 132s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm [ 132s] Processing files: usbutils-0.86-7.2.armv7l [ 132s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.YXopJa [ 132s] + umask 022 [ 132s] + cd /home/abuild/rpmbuild/BUILD [ 132s] + cd usbutils-0.86 [ 132s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/share/doc/usbutils-0.86 [ 132s] + export DOCDIR [ 132s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/share/doc/usbutils-0.86 [ 132s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm/usr/share/doc/usbutils-0.86 [ 132s] + exit 0 [ 132s] Provides: pkgconfig(usbutils) = 0.86 [ 132s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 132s] Requires: /bin/bash /bin/sh /usr/bin/pkg-config ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libusb-0.1.so.4 libz.so.1 libz.so.1(ZLIB_1.2.3.3) [ 132s] Processing files: usbutils-debuginfo-0.86-7.2.armv7l [ 132s] Processing files: usbutils-debugsource-0.86-7.2.armv7l [ 132s] Processing files: usbutils-docs-0.86-7.2.armv7l [ 132s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm [ 132s] Wrote: /home/abuild/rpmbuild/SRPMS/usbutils-0.86-7.2.src.rpm [ 132s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/usbutils-0.86-7.2.armv7l.rpm [ 132s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/usbutils-debuginfo-0.86-7.2.armv7l.rpm [ 132s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/usbutils-debugsource-0.86-7.2.armv7l.rpm [ 132s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/usbutils-docs-0.86-7.2.armv7l.rpm [ 132s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.sf7JLJ [ 132s] + umask 022 [ 132s] + cd /home/abuild/rpmbuild/BUILD [ 132s] + cd usbutils-0.86 [ 132s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/usbutils-0.86-7.2.arm [ 132s] + exit 0 [ 132s] ... checking for files with abuild user/group [ 132s] ... creating baselibs [ 133s] ... comparing built packages with the former built [ 133s] /usr/lib/build/rpm-check.sh [ 133s] compare /.build.oldpackages/usbutils-0.86-7.1.src.rpm /home/abuild/rpmbuild/SRPMS/usbutils-0.86-7.2.src.rpm [ 133s] compare /.build.oldpackages/usbutils-0.86-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/usbutils-0.86-7.2.armv7l.rpm [ 134s] --- /tmp/tmp.TFLYqEItp1 2013-11-07 08:38:24.110591694 +0000 [ 134s] +++ /tmp/tmp.lOB38g185k 2013-11-07 08:38:24.122591695 +0000 [ 134s] @@ -2,7 +2,7 @@ [ 134s] Linux USB utilities [ 134s] This package contains utilities for inspecting devices connected to a [ 134s] USB bus. [ 134s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/f975c5733d4b9b79d9558b308f7209c1-usbutils GPLv2+ GPLv2+ [ 134s] + tizen Tizen:2.2:Main obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/f975c5733d4b9b79d9558b308f7209c1-usbutils GPLv2+ GPLv2+ [ 134s] Applications/System http://www.linux-usb.org/ (none) (none) (none) [ 134s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 134s] cpio gzip 9 [ 134s] RPM meta information is different [ 134s] compare /.build.oldpackages/usbutils-debuginfo-0.86-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/usbutils-debuginfo-0.86-7.2.armv7l.rpm [ 134s] --- /tmp/tmp.beKDKr3yGZ 2013-11-07 08:38:24.242591699 +0000 [ 134s] +++ /tmp/tmp.SnYQGwSfRc 2013-11-07 08:38:24.254591699 +0000 [ 134s] @@ -3,7 +3,7 @@ [ 134s] This package provides debug information for package usbutils. [ 134s] Debug information is useful when developing applications that use this [ 134s] package or when debugging this package. [ 134s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/f975c5733d4b9b79d9558b308f7209c1-usbutils GPLv2+ GPLv2+ [ 134s] + tizen Tizen:2.2:Main obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/f975c5733d4b9b79d9558b308f7209c1-usbutils GPLv2+ GPLv2+ [ 134s] Development/Debug http://www.linux-usb.org/ (none) (none) (none) [ 134s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 134s] cpio gzip 9 [ 134s] RPM meta information is different [ 134s] compare /.build.oldpackages/usbutils-debugsource-0.86-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/usbutils-debugsource-0.86-7.2.armv7l.rpm [ 134s] --- /tmp/tmp.IyfVpNZIcZ 2013-11-07 08:38:24.442591706 +0000 [ 134s] +++ /tmp/tmp.RDKDoFlcMV 2013-11-07 08:38:24.454591706 +0000 [ 134s] @@ -3,7 +3,7 @@ [ 134s] This package provides debug sources for package usbutils. [ 134s] Debug sources are useful when developing applications that use this [ 134s] package or when debugging this package. [ 134s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/f975c5733d4b9b79d9558b308f7209c1-usbutils GPLv2+ GPLv2+ [ 134s] + tizen Tizen:2.2:Main obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/f975c5733d4b9b79d9558b308f7209c1-usbutils GPLv2+ GPLv2+ [ 134s] Development/Debug http://www.linux-usb.org/ (none) (none) (none) [ 134s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 134s] cpio gzip 9 [ 134s] RPM meta information is different [ 134s] compare /.build.oldpackages/usbutils-docs-0.86-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/usbutils-docs-0.86-7.2.armv7l.rpm [ 134s] --- /tmp/tmp.0cvGFEO0fj 2013-11-07 08:38:24.562591710 +0000 [ 134s] +++ /tmp/tmp.pDkhmFquA9 2013-11-07 08:38:24.578591711 +0000 [ 134s] @@ -1,7 +1,7 @@ [ 134s] usbutils-docs 0.86 (none) [ 134s] Documentation for package usbutils [ 134s] This package provides documentation for package usbutils. [ 134s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/f975c5733d4b9b79d9558b308f7209c1-usbutils GPLv2+ GPLv2+ [ 134s] + tizen Tizen:2.2:Main obs://w07.vlan200.tizendev.org/Tizen:2.2:Main/standard/f975c5733d4b9b79d9558b308f7209c1-usbutils GPLv2+ GPLv2+ [ 134s] Documentation http://www.linux-usb.org/ (none) (none) (none) [ 134s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 134s] cpio gzip 9 [ 134s] RPM meta information is different [ 134s] ... saving built statistics [ 134s] ... saving built packages [ 134s] /home/abuild/rpmbuild/RPMS/armv7l/usbutils-0.86-7.2.armv7l.rpm [ 134s] /home/abuild/rpmbuild/RPMS/armv7l/usbutils-debuginfo-0.86-7.2.armv7l.rpm [ 134s] /home/abuild/rpmbuild/RPMS/armv7l/usbutils-debugsource-0.86-7.2.armv7l.rpm [ 134s] /home/abuild/rpmbuild/RPMS/armv7l/usbutils-docs-0.86-7.2.armv7l.rpm [ 134s] /home/abuild/rpmbuild/SRPMS/usbutils-0.86-7.2.src.rpm [ 134s] /home/abuild/rpmbuild/OTHER/_statistics [ 135s] [ 135s] w07 finished "build usbutils.spec" at Thu Nov 7 08:38:25 UTC 2013. [ 135s] [ 136s] /.build/build: line 368: 232 Killed background_monitor_process [ 138s] [ 131.346849] SysRq : Power Off [ 138s] [ 131.560273] Power down. [ 138s] build: extracting built packages... [ 138s] usbutils-0.86-7.2.armv7l.rpm [ 138s] usbutils-debuginfo-0.86-7.2.armv7l.rpm [ 138s] usbutils-debugsource-0.86-7.2.armv7l.rpm [ 138s] usbutils-docs-0.86-7.2.armv7l.rpm [ 138s] usbutils-0.86-7.2.src.rpm [ 138s] _statistics