[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w17 started "build xcb-proto.spec" at Thu Nov 7 08:51:31 UTC 2013. [ 0s] [ 0s] Building xcb-proto for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '5b3f49f0f94b5e805d6ae51d023d8a20' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/xcb-proto.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/xcb-proto.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/xcb-proto.spec build rpmlint-Factory ... [ 1s] hostname: Name or service not known [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 3s] [45/56] preinstalling liblua-x86-arm... [ 3s] [46/56] preinstalling ncurses-libs-x86-arm... [ 3s] [47/56] preinstalling nspr-x86-arm... [ 3s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [49/56] preinstalling nss-x86-arm... [ 3s] [50/56] preinstalling popt-x86-arm... [ 3s] [51/56] preinstalling rpm-libs-x86-arm... [ 3s] [52/56] preinstalling sqlite-x86-arm... [ 3s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] done [ 21s] booting kvm ... [ 21s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 4 [ 23s] doing fast boot [ 23s] Creating device nodes with udev [ 26s] Waiting for device /dev/vda to appear: ok [ 26s] fsck from util-linux 2.21.2 [ 26s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 26s] /dev/vda: clean, 6823/2097152 files, 241766/8388608 blocks [ 26s] fsck succeeded. Mounting root device read-write. [ 26s] Mounting root /dev/vda [ 26s] mount -o rw -t ext4 /dev/vda /root [ 27s] replacing /etc/mtab with symlink to /proc/self/mounts [ 28s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 29s] 2nd stage started in virtual machine [ 29s] machine type: armv7l [ 29s] switching personality to 8... [ 30s] 2nd stage started in virtual machine [ 30s] machine type: armv7l [ 30s] swapon on /dev/vdb [ 30s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 30s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 31s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 31s] logging output to //.build.log... [ 31s] processing specfile /.build-srcdir/xcb-proto.spec ... [ 31s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/xcb-proto.spec build rpmlint-Factory ... [ 43s] running rpm-x86-arm postinstall script [ 43s] /bin/rpm [ 43s] /usr/bin/rpm2cpio [ 44s] /usr/bin/rpmdb [ 44s] /usr/bin/rpmquery [ 44s] /usr/bin/rpmsign [ 44s] /usr/bin/rpmverify [ 44s] running rpm-libs-x86-arm postinstall script [ 44s] running tizen-accelerator postinstall script [ 44s] running bash-x86-arm postinstall script [ 44s] initializing rpm db... [ 49s] [1/146] installing kernel-headers-3.0.15-1.10 [ 50s] [2/146] installing tizen-release-2.2.0-1.9 [ 50s] [3/146] installing tzdata-2011h-1.10 [ 51s] [4/146] installing libgcc-4.5.3-2.33 [ 51s] [5/146] installing setup-0.1-2.6 [ 51s] [6/146] installing filesystem-0.1-1.9 [ 51s] warning: group lock does not exist - using root [ 51s] warning: group mail does not exist - using root [ 51s] [7/146] installing eglibc-2.13-2.18 [ 52s] [8/146] installing libstdc++-4.5.3-2.33 [ 52s] [9/146] installing eglibc-common-2.13-2.18 [ 55s] /var/tmp/rpm-tmp.vBN7ae: line 2: /usr/bin/xargs: No such file or directory [ 55s] [10/146] installing libstdc++-devel-4.5.3-2.33 [ 55s] [11/146] installing bash-4.1-4.9 [ 55s] [12/146] installing bzip2-libs-1.0.5-5.12 [ 55s] [13/146] installing c-ares-1.7.4-3.22 [ 55s] [14/146] installing cpio-2.8-4.8 [ 55s] [15/146] installing diffutils-3.0-4.8 [ 56s] [16/146] installing e2fsprogs-libs-1.41.9-3.8 [ 56s] [17/146] installing elfutils-libelf-0.152-2.16 [ 56s] [18/146] installing fdupes-1.40-42.10 [ 56s] [19/146] installing findutils-4.2.31-2.8 [ 56s] [20/146] installing gdbm-1.8.3-2.33 [ 56s] [21/146] installing libattr-2.4.44-8.12 [ 57s] [22/146] installing libgomp-4.5.3-2.33 [ 57s] [23/146] installing libidn-1.15-7.29 [ 57s] [24/146] installing liblua-5.1.4-7.7 [ 57s] [25/146] installing libuuid-2.20.2-7.7 [ 58s] [26/146] installing lzo-2.03-2.18 [ 58s] [27/146] installing m4-1.4.14-1.9 [ 58s] [28/146] installing make-3.81-1.12 [ 58s] [29/146] installing net-tools-1.60-88.9 [ 58s] [30/146] installing nspr-4.8.7-1.17 [ 59s] [31/146] installing nss-softokn-freebl-3.12.9-3.28 [ 59s] [32/146] installing patch-2.6.1.169-1.9 [ 59s] [33/146] installing pkgconfig-0.25-3.11 [ 59s] [34/146] installing popt-1.16-4.11 [ 59s] [35/146] installing readline-5.2-14.7 [ 59s] [36/146] installing sed-4.1.5-3.8 [ 59s] [37/146] installing sqlite-3.7.13-1.12 [ 59s] [38/146] installing xz-libs-5.0.3-2.17 [ 60s] [39/146] installing zlib-1.2.5-3.18 [ 60s] [40/146] installing gmp-5.0.1-2.16 [ 60s] [41/146] installing libpcre-7.7-4.44 [ 60s] [42/146] installing ncurses-libs-5.7-4.11 [ 60s] [43/146] installing build-compare-2009.10.14-26.14 [ 60s] [44/146] installing qemu.x86_64-1.2-2.10 [ 63s] [45/146] installing eglibc-headers-2.13-2.18 [ 63s] [46/146] installing libcap-2.21-2.10 [ 63s] [47/146] installing unzip-6.0-10.16 [ 64s] [48/146] installing zlib-devel-1.2.5-3.18 [ 64s] [49/146] installing grep-2.5.1a-63.9 [ 64s] [50/146] installing libacl-2.2.49-3.12 [ 64s] [51/146] installing libfile-5.04-2.11 [ 65s] [52/146] installing libpython-2.7.1-2.9 [ 65s] [53/146] installing lzo-minilzo-2.03-2.18 [ 65s] [54/146] installing mpfr-3.0.0-1.16 [ 65s] [55/146] installing ncurses-5.7-4.11 [ 65s] [56/146] installing binutils-2.22-1.12 [ 66s] [57/146] installing bzip2-1.0.5-5.12 [ 66s] [58/146] installing libblkid-2.20.2-7.7 [ 66s] [59/146] installing xz-5.0.3-2.17 [ 66s] [60/146] installing elfutils-libs-0.152-2.16 [ 66s] [61/146] installing nss-3.12.9-3.28 [ 66s] [62/146] installing perl-5.12.1-62.7 [ 68s] [63/146] installing ncurses-base-5.7-4.11 [ 68s] [64/146] installing perl-HTML-Tagset-3.20-8.2 [ 68s] [65/146] installing perl-IO-Compress-Base-2.008-62.7 [ 68s] [66/146] installing perl-Module-Pluggable-3.60-62.7 [ 68s] [67/146] installing perl-Pod-Escapes-1.04-62.7 [ 68s] [68/146] installing perl-TimeDate-1.20-1.2 [ 68s] [69/146] installing eglibc-devel-2.13-2.18 [ 68s] [70/146] installing lzo-devel-2.03-2.18 [ 68s] [71/146] installing perl-Compress-Raw-Zlib-2.008-62.7 [ 68s] [72/146] installing perl-devel-5.12.1-62.7 [ 69s] [73/146] installing perl-libs-5.12.1-62.7 [ 69s] [74/146] installing tar-1.17-5.11 [ 69s] [75/146] installing coreutils-6.9-9.12 [ 69s] [76/146] installing file-5.04-2.11 [ 69s] [77/146] installing libmount-2.20.2-7.7 [ 69s] [78/146] installing mpc-0.9-1.16 [ 69s] [79/146] installing openssl-1.0.1c-2.26 [ 69s] [80/146] installing xz-lzma-compat-5.0.3-2.17 [ 69s] [81/146] installing elfutils-0.152-2.16 [ 70s] [82/146] installing nss-sysinit-3.12.9-3.28 [ 70s] [83/146] installing python-base-2.7.1-2.9 [ 70s] [84/146] installing perl-ExtUtils-ParseXS-2.18-62.7 [ 70s] [85/146] installing perl-Pod-Simple-3.07-62.7 [ 70s] [86/146] installing perl-Test-Simple-0.80-62.7 [ 70s] [87/146] installing tizen-accelerator-1.0.1-1.14 [ 71s] [88/146] installing perl-IO-Compress-Zlib-2.008-62.7 [ 71s] [89/146] installing perl-Test-Harness-3.12-62.7 [ 71s] [90/146] installing gawk-3.1.5-2.9 [ 71s] [91/146] installing gzip-1.3.14-3.8 [ 71s] [92/146] installing build-2011.01.10a-1.9 [ 71s] [93/146] installing python-devel-2.7.1-2.9 [ 71s] [94/146] installing libcurl-7.28.1-3.26 [ 72s] [95/146] installing cpp-4.5.3-2.33 [ 72s] [96/146] installing util-linux-2.20.2-7.7 [ 72s] warning: group tty does not exist - using root [ 72s] /bin/chown: `root:root': invalid user [ 72s] [97/146] installing bzip2-libs-x86-arm-1.0.5-9.7 [ 72s] [98/146] installing eglibc-x86-arm-2.13-9.7 [ 73s] [99/146] installing elfutils-libelf-x86-arm-0.152-9.7 [ 73s] [100/146] installing elfutils-libs-x86-arm-0.152-9.7 [ 73s] [101/146] installing gmp-x86-arm-5.0.1-9.7 [ 73s] [102/146] installing libacl-x86-arm-2.2.49-9.7 [ 73s] [103/146] installing libattr-x86-arm-2.4.44-9.7 [ 74s] [104/146] installing libcap-x86-arm-2.21-9.6 [ 74s] [105/146] installing libfile-x86-arm-5.04-9.7 [ 74s] [106/146] installing libgcc-x86-arm-4.5.3-9.7 [ 74s] [107/146] installing liblua-x86-arm-5.1.4-9.7 [ 75s] [108/146] installing mpc-x86-arm-0.9-9.7 [ 75s] [109/146] installing mpfr-x86-arm-3.0.0-9.7 [ 75s] [110/146] installing ncurses-libs-x86-arm-5.7-9.6 [ 76s] [111/146] installing nspr-x86-arm-4.8.7-9.7 [ 76s] [112/146] installing nss-softokn-freebl-x86-arm-3.12.9-9.7 [ 76s] [113/146] installing nss-x86-arm-3.12.9-9.7 [ 76s] [114/146] installing perl-ExtUtils-MakeMaker-6.36-62.7 [ 76s] [115/146] installing popt-x86-arm-1.16-9.7 [ 77s] [116/146] installing sqlite-x86-arm-3.7.13-9.6 [ 77s] [117/146] installing xz-libs-x86-arm-5.0.3-9.7 [ 77s] [118/146] installing zlib-x86-arm-1.2.5-7.6 [ 77s] [119/146] installing curl-7.28.1-3.26 [ 77s] [120/146] installing gcc-4.5.3-2.33 [ 78s] [121/146] installing perl-CPAN-1.9205-62.7 [ 78s] [122/146] installing bash-x86-arm-4.1-7.7 [ 78s] [123/146] installing fdupes-x86-arm-1.40-9.7 [ 78s] [124/146] installing findutils-x86-arm-4.2.31-7.7 [ 78s] [125/146] installing gawk-x86-arm-3.1.5-7.7 [ 78s] [126/146] installing gzip-x86-arm-1.3.14-9.7 [ 79s] [127/146] installing make-x86-arm-3.81-8.6 [ 79s] [128/146] installing patch-x86-arm-2.6.1.169-7.7 [ 79s] [129/146] installing sed-x86-arm-4.1.5-9.7 [ 79s] /bin/sed.orig-arm already present - skipping. [ 79s] [130/146] installing diffutils-x86-arm-3.0-9.7 [ 79s] /usr/bin/cmp.orig-arm already present - skipping. [ 79s] /usr/bin/diff.orig-arm already present - skipping. [ 79s] /usr/bin/diff3.orig-arm already present - skipping. [ 79s] /usr/bin/sdiff.orig-arm already present - skipping. [ 79s] [131/146] installing autoconf-2.68-1.9 [ 80s] [132/146] installing coreutils-x86-arm-6.9-7.7 [ 82s] [133/146] installing file-x86-arm-5.04-7.7 [ 82s] [134/146] installing tar-x86-arm-1.17-9.6 [ 82s] /bin/tar.orig-arm already present - skipping. [ 82s] [135/146] installing elfutils-x86-arm-0.152-7.8 [ 83s] [136/146] installing gcc-c++-4.5.3-2.33 [ 83s] [137/146] installing rpm-4.9.1-4.12 [ 83s] [138/146] installing automake-1.11.1-3.12 [ 83s] [139/146] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 84s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 84s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 84s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 84s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 84s] [140/146] installing rpm-libs-4.9.1-4.12 [ 85s] [141/146] installing rpm-libs-x86-arm-4.9.1-10.7 [ 85s] [142/146] installing libtool-2.2.6b-2.15 [ 85s] [143/146] installing cross-armv7l-binutils-accel-armv7l-2.22-1.6 [ 86s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 86s] [144/146] installing rpm-build-4.9.1-4.12 [ 86s] [145/146] installing rpm-x86-arm-4.9.1-9.7 [ 87s] /bin/rpm.orig-arm already present - skipping. [ 87s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 87s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 87s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 87s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 87s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 87s] [146/146] installing rpm-build-x86-arm-4.9.1-9.7 [ 87s] /usr/bin/rpmbuild [ 87s] /usr/lib/rpm/debugedit [ 87s] now finalizing build dir... [ 87s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 90s] build target is armv7l-tizen-linux [ 90s] ----------------------------------------------------------------- [ 90s] I have the following modifications for xcb-proto.spec: [ 90s] 4c4 [ 90s] < Release: 3 [ 90s] --- [ 90s] > Release: 4.8 [ 90s] ----------------------------------------------------------------- [ 90s] ----- building xcb-proto.spec (user abuild) [ 90s] ----------------------------------------------------------------- [ 90s] ----------------------------------------------------------------- [ 90s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w17.vlan200.tizendev.org/Tizen:2.2:Main/standard/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto' /home/abuild/rpmbuild/SOURCES/xcb-proto.spec [ 91s] Building target platforms: armv7l-tizen-linux [ 91s] Building for target armv7l-tizen-linux [ 91s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.OpcBTA [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + LANG=C [ 91s] + export LANG [ 91s] + unset DISPLAY [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + rm -rf xcb-proto-1.7.1 [ 91s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xcb-proto-1.7.1.tar.gz [ 91s] + /bin/tar -xf - [ 91s] + STATUS=0 [ 91s] + '[' 0 -ne 0 ']' [ 91s] + cd xcb-proto-1.7.1 [ 91s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 91s] + exit 0 [ 91s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.QL44BQ [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd xcb-proto-1.7.1 [ 91s] + LANG=C [ 91s] + export LANG [ 91s] + unset DISPLAY [ 91s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 91s] + export CFLAGS [ 91s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 91s] + export CXXFLAGS [ 91s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 91s] + export FFLAGS [ 91s] + LD_AS_NEEDED=1 [ 91s] + export LD_AS_NEEDED [ 91s] + ./autogen.sh [ 95s] autoreconf: Entering directory `.' [ 95s] autoreconf: configure.ac: not using Gettext [ 96s] autoreconf: running: aclocal [ 101s] autoreconf: configure.ac: tracing [ 104s] autoreconf: configure.ac: not using Libtool [ 104s] autoreconf: running: /usr/bin/autoconf [ 106s] autoreconf: configure.ac: not using Autoheader [ 106s] autoreconf: running: automake --add-missing --copy --no-force [ 110s] configure.ac:9: installing `./install-sh' [ 110s] configure.ac:9: installing `./missing' [ 111s] autoreconf: Leaving directory `.' [ 112s] configure: WARNING: unrecognized options: --enable-maintainer-mode [ 112s] checking for a BSD-compatible install... /usr/bin/install -c [ 113s] checking whether build environment is sane... yes [ 113s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 113s] checking for gawk... gawk [ 113s] checking whether make sets $(MAKE)... yes [ 113s] checking for xmllint... no [ 113s] configure: WARNING: xmllint not found; unable to validate against schema. [ 113s] checking for a Python interpreter with version >= 2.5... python [ 113s] checking for python... /usr/bin/python [ 113s] checking for python version... 2.7 [ 114s] checking for python platform... linux3 [ 114s] checking for python script directory... ${prefix}/lib/python2.7/site-packages [ 114s] checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages [ 114s] configure: creating ./config.status [ 115s] config.status: creating Makefile [ 115s] config.status: creating src/Makefile [ 115s] config.status: creating xcbgen/Makefile [ 115s] config.status: creating xcb-proto.pc [ 115s] configure: WARNING: unrecognized options: --enable-maintainer-mode [ 115s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 115s] + export CFLAGS [ 115s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 115s] + export CXXFLAGS [ 115s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 115s] + export FFLAGS [ 115s] + autoreconf -v --install --force [ 118s] autoreconf: Entering directory `.' [ 118s] autoreconf: configure.ac: not using Gettext [ 119s] autoreconf: running: aclocal --force [ 124s] autoreconf: configure.ac: tracing [ 126s] autoreconf: configure.ac: not using Libtool [ 126s] autoreconf: running: /usr/bin/autoconf --force [ 130s] autoreconf: configure.ac: not using Autoheader [ 130s] autoreconf: running: automake --add-missing --copy --force-missing [ 135s] autoreconf: Leaving directory `.' [ 135s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-shared [ 135s] configure: WARNING: unrecognized options: --disable-shared [ 135s] checking for a BSD-compatible install... /usr/bin/install -c [ 136s] checking whether build environment is sane... yes [ 136s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 136s] checking for gawk... gawk [ 136s] checking whether make sets $(MAKE)... yes [ 136s] checking for xmllint... no [ 136s] configure: WARNING: xmllint not found; unable to validate against schema. [ 137s] checking for a Python interpreter with version >= 2.5... python [ 137s] checking for python... /usr/bin/python [ 137s] checking for python version... 2.7 [ 137s] checking for python platform... linux3 [ 138s] checking for python script directory... ${prefix}/lib/python2.7/site-packages [ 138s] checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages [ 138s] configure: creating ./config.status [ 138s] config.status: creating Makefile [ 138s] config.status: creating src/Makefile [ 138s] config.status: creating xcbgen/Makefile [ 138s] config.status: creating xcb-proto.pc [ 138s] configure: WARNING: unrecognized options: --disable-shared [ 138s] + make -j4 [ 138s] Making all in src [ 138s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 138s] make[1]: Nothing to be done for `all'. [ 138s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 138s] Making all in xcbgen [ 138s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 138s] make[1]: Nothing to be done for `all'. [ 138s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 138s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 138s] make[1]: Nothing to be done for `all-am'. [ 138s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 138s] + exit 0 [ 138s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.8AkIvY [ 138s] + umask 022 [ 138s] + cd /home/abuild/rpmbuild/BUILD [ 138s] + cd xcb-proto-1.7.1 [ 138s] + LANG=C [ 138s] + export LANG [ 138s] + unset DISPLAY [ 138s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm [ 138s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm [ 138s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm [ 138s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm install [ 138s] Making install in src [ 138s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 138s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 138s] make[2]: Nothing to be done for `install-exec-am'. [ 138s] test -z "/usr/share/xcb" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/share/xcb" [ 138s] /usr/bin/install -c -m 644 xcb.xsd xproto.xml bigreq.xml composite.xml damage.xml dpms.xml dri2.xml ge.xml glx.xml randr.xml record.xml render.xml res.xml screensaver.xml shape.xml shm.xml sync.xml xc_misc.xml xevie.xml xf86dri.xml xf86vidmode.xml xfixes.xml xinerama.xml xinput.xml xkb.xml xprint.xml xselinux.xml xtest.xml xv.xml xvmc.xml '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/share/xcb' [ 138s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 138s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 138s] Making install in xcbgen [ 138s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 138s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 138s] make[2]: Nothing to be done for `install-exec-am'. [ 138s] test -z "/usr/lib/python2.7/site-packages/xcbgen" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/lib/python2.7/site-packages/xcbgen" [ 138s] /usr/bin/install -c -m 644 __init__.py error.py expr.py matcher.py state.py xtypes.py '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/lib/python2.7/site-packages/xcbgen' [ 139s] Byte-compiling python modules... [ 139s] __init__.pyerror.pyexpr.pymatcher.pystate.pyxtypes.py [ 139s] Byte-compiling python modules (optimized versions) ... [ 139s] __init__.pyerror.pyexpr.pymatcher.pystate.pyxtypes.py [ 139s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 139s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 139s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 139s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 139s] make[2]: Nothing to be done for `install-exec-am'. [ 139s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/lib/pkgconfig" [ 139s] /usr/bin/install -c -m 644 xcb-proto.pc '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/lib/pkgconfig' [ 139s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 139s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 139s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/share/info/dir [ 139s] + xargs rm -f -- [ 139s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm -regex '.*\.la$' [ 139s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm -regex '.*\.a$' [ 139s] + xargs rm -f -- [ 139s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/share/info [ 139s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/share/doc [ 139s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/share/doc/xcb-proto [ 139s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/share/gtk-doc [ 139s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/share/man [ 139s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm -regex '.*/man/man./.*.[0-9]' [ 139s] + xargs rm -f -- [ 139s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm -regex '.*/man/../man./.*.[0-9]' [ 139s] + xargs rm -f -- [ 139s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm -regex '.*/man/man./.*.[0-9]pm' [ 139s] + xargs rm -f -- [ 139s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1 [ 139s] + /usr/lib/rpm/check-buildroot [ 139s] + /usr/lib/rpm//brp-compress [ 139s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 139s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 139s] + /usr/lib/rpm/brp-python-bytecompile [ 139s] Bytecompiling .py files below /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm/usr/lib/python2.7/ using /usr/bin/python2.7 [ 141s] + /usr/lib/rpm/brp-python-hardlink [ 141s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm [ 141s] Processing files: xcb-proto-1.7.1-4.8.armv7l [ 142s] Provides: pkgconfig(xcb-proto) = 1.7.1 [ 142s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 142s] Requires: /usr/bin/pkg-config python(abi) = 2.7 [ 142s] Processing files: xcb-proto-debuginfo-1.7.1-4.8.armv7l [ 142s] Processing files: xcb-proto-debugsource-1.7.1-4.8.armv7l [ 142s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm [ 142s] Wrote: /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-4.8.src.rpm [ 142s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-1.7.1-4.8.armv7l.rpm [ 142s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debuginfo-1.7.1-4.8.armv7l.rpm [ 142s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debugsource-1.7.1-4.8.armv7l.rpm [ 142s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.eFrDkO [ 142s] + umask 022 [ 142s] + cd /home/abuild/rpmbuild/BUILD [ 142s] + cd xcb-proto-1.7.1 [ 142s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm [ 142s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-4.8.arm [ 142s] + exit 0 [ 142s] ... checking for files with abuild user/group [ 142s] ... creating baselibs [ 143s] ... comparing built packages with the former built [ 143s] /usr/lib/build/rpm-check.sh [ 143s] compare /.build.oldpackages/xcb-proto-1.7.1-4.7.src.rpm /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-4.8.src.rpm [ 143s] compare /.build.oldpackages/xcb-proto-1.7.1-4.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-1.7.1-4.8.armv7l.rpm [ 143s] --- /tmp/tmp.ZTjPTzmmCh 2013-11-07 08:53:54.476411523 +0000 [ 143s] +++ /tmp/tmp.6zRZBnyjMY 2013-11-07 08:53:54.492411523 +0000 [ 143s] @@ -5,7 +5,7 @@ [ 143s] This package contains the protocol descriptions themselves. Language [ 143s] bindings use these protocol descriptions to generate code for marshalling [ 143s] the protocol. [ 143s] - tizen Tizen:2.2:Main obs://w05.vlan200.tizendev.org/Tizen:2.2:Main/standard/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto MIT MIT [ 143s] + tizen Tizen:2.2:Main obs://w17.vlan200.tizendev.org/Tizen:2.2:Main/standard/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto MIT MIT [ 143s] Development/Libraries http://xcb.freedesktop.org/ (none) (none) (none) [ 143s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 143s] cpio gzip 9 [ 143s] RPM meta information is different [ 143s] compare /.build.oldpackages/xcb-proto-debuginfo-1.7.1-4.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debuginfo-1.7.1-4.8.armv7l.rpm [ 143s] --- /tmp/tmp.ilvSOBUdh2 2013-11-07 08:53:54.536411523 +0000 [ 143s] +++ /tmp/tmp.PcWc3IuyXA 2013-11-07 08:53:54.552411524 +0000 [ 143s] @@ -3,7 +3,7 @@ [ 143s] This package provides debug information for package xcb-proto. [ 143s] Debug information is useful when developing applications that use this [ 143s] package or when debugging this package. [ 143s] - tizen Tizen:2.2:Main obs://w05.vlan200.tizendev.org/Tizen:2.2:Main/standard/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto MIT MIT [ 143s] + tizen Tizen:2.2:Main obs://w17.vlan200.tizendev.org/Tizen:2.2:Main/standard/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto MIT MIT [ 143s] Development/Debug http://xcb.freedesktop.org/ (none) (none) (none) [ 143s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 143s] cpio gzip 9 [ 143s] RPM meta information is different [ 143s] compare /.build.oldpackages/xcb-proto-debugsource-1.7.1-4.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debugsource-1.7.1-4.8.armv7l.rpm [ 144s] --- /tmp/tmp.r0mDSKsjCp 2013-11-07 08:53:54.600411524 +0000 [ 144s] +++ /tmp/tmp.mD63FcbDle 2013-11-07 08:53:54.616411525 +0000 [ 144s] @@ -3,7 +3,7 @@ [ 144s] This package provides debug sources for package xcb-proto. [ 144s] Debug sources are useful when developing applications that use this [ 144s] package or when debugging this package. [ 144s] - tizen Tizen:2.2:Main obs://w05.vlan200.tizendev.org/Tizen:2.2:Main/standard/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto MIT MIT [ 144s] + tizen Tizen:2.2:Main obs://w17.vlan200.tizendev.org/Tizen:2.2:Main/standard/5b3f49f0f94b5e805d6ae51d023d8a20-xcb-proto MIT MIT [ 144s] Development/Debug http://xcb.freedesktop.org/ (none) (none) (none) [ 144s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 144s] cpio gzip 9 [ 144s] RPM meta information is different [ 144s] ... saving built statistics [ 144s] ... saving built packages [ 144s] /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-1.7.1-4.8.armv7l.rpm [ 144s] /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debuginfo-1.7.1-4.8.armv7l.rpm [ 144s] /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debugsource-1.7.1-4.8.armv7l.rpm [ 144s] /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-4.8.src.rpm [ 144s] /home/abuild/rpmbuild/OTHER/_statistics [ 144s] [ 144s] w17 finished "build xcb-proto.spec" at Thu Nov 7 08:53:54 UTC 2013. [ 144s] [ 147s] [ 123.961922] SysRq : Power Off [ 147s] [ 124.074553] Power down. [ 147s] build: extracting built packages... [ 147s] xcb-proto-1.7.1-4.8.armv7l.rpm [ 147s] xcb-proto-debuginfo-1.7.1-4.8.armv7l.rpm [ 147s] xcb-proto-debugsource-1.7.1-4.8.armv7l.rpm [ 147s] xcb-proto-1.7.1-4.8.src.rpm [ 147s] _statistics